diff options
Diffstat (limited to 'arch/arm')
729 files changed, 11542 insertions, 9283 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 94422601ea5b..cf006d40342c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,6 +9,7 @@ config ARM select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_KPROBES if !XIP_KERNEL select HAVE_KRETPROBES if (HAVE_KPROBES) @@ -21,6 +22,7 @@ config ARM select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA + select HAVE_KERNEL_XZ select HAVE_IRQ_WORK select HAVE_PERF_EVENTS select PERF_USE_VMALLOC @@ -28,10 +30,10 @@ config ARM select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ select GENERIC_IRQ_SHOW select CPU_PM if (SUSPEND || CPU_IDLE) select GENERIC_PCI_IOMAP + select HAVE_BPF_JIT if NET help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -52,9 +54,6 @@ config MIGHT_HAVE_PCI config SYS_SUPPORTS_APM_EMULATION bool -config HAVE_SCHED_CLOCK - bool - config GENERIC_GPIO bool @@ -180,6 +179,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config ARCH_HAS_DMA_SET_COHERENT_MASK + bool + config GENERIC_ISA_DMA bool @@ -217,6 +219,13 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. +config NEED_MACH_IO_H + bool + help + Select this when mach/io.h is required to provide special + definitions for this platform. The need for mach/io.h should + be avoided when possible. + config NEED_MACH_MEMORY_H bool help @@ -268,7 +277,9 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for ARM's Integrator platform. @@ -315,6 +326,7 @@ config ARCH_VEXPRESS select HAVE_CLK select HAVE_PATA_PLATFORM select ICST + select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD help @@ -326,6 +338,7 @@ config ARCH_AT91 select HAVE_CLK select CLKDEV_LOOKUP select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 processors. @@ -354,6 +367,7 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_SMP + select SPARSE_IRQ select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -404,6 +418,7 @@ config ARCH_EBSA110 select ISA select NO_IOPORT select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help This is an evaluation board for the StrongARM processor available @@ -430,6 +445,7 @@ config ARCH_FOOTBRIDGE select FOOTBRIDGE select GENERIC_CLOCKEVENTS select HAVE_IDE + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -442,7 +458,6 @@ config ARCH_MXC select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_SCHED_CLOCK select MULTI_IRQ_HANDLER help Support for Freescale MXC/iMX-based family of processors @@ -482,6 +497,7 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NEED_RET_TO_USER help @@ -491,6 +507,7 @@ config ARCH_IOP32X bool "IOP32x-based" depends on MMU select CPU_XSCALE + select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -503,6 +520,7 @@ config ARCH_IOP33X bool "IOP33x-based" depends on MMU select CPU_XSCALE + select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -516,6 +534,7 @@ config ARCH_IXP23XX select CPU_XSC3 select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help Support for Intel's IXP23xx (XScale) family of processors. @@ -526,6 +545,7 @@ config ARCH_IXP2000 select CPU_XSCALE select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -533,12 +553,13 @@ config ARCH_IXP2000 config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU + select ARCH_HAS_DMA_SET_COHERENT_MASK select CLKSRC_MMIO select CPU_XSCALE select GENERIC_GPIO select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select MIGHT_HAVE_PCI + select NEED_MACH_IO_H select DMABOUNCE if PCI help Support for Intel's IXP4XX (XScale) family of processors. @@ -549,6 +570,7 @@ config ARCH_DOVE select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the Marvell Dove SoC 88AP510 @@ -559,6 +581,7 @@ config ARCH_KIRKWOOD select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Kirkwood series SoCs: @@ -583,6 +606,7 @@ config ARCH_MV78XX0 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell MV78xx0 series SoCs: @@ -608,7 +632,6 @@ config ARCH_MMP select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select GPIO_PXA - select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ @@ -649,9 +672,9 @@ config ARCH_TEGRA select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK - select HAVE_SCHED_CLOCK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -666,7 +689,6 @@ config ARCH_PICOXCELL select DW_APB_TIMER select GENERIC_CLOCKEVENTS select GENERIC_GPIO - select HAVE_SCHED_CLOCK select HAVE_TCM select NO_IOPORT select SPARSE_IRQ @@ -694,7 +716,6 @@ config ARCH_PXA select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select GPIO_PXA - select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ @@ -738,7 +759,6 @@ config ARCH_RPC bool "RiscPC" select ARCH_ACORN select FIQ - select TIMER_ACORN select ARCH_MAY_HAVE_PC_FDC select HAVE_PATA_PLATFORM select ISA_DMA_API @@ -746,6 +766,7 @@ config ARCH_RPC select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET select HAVE_IDE + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and @@ -762,11 +783,11 @@ config ARCH_SA1100 select CPU_FREQ select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB select HAVE_IDE select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for StrongARM 11x0 based boards. @@ -780,6 +801,7 @@ config ARCH_S3C24XX select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_IO_H help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST @@ -818,7 +840,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select HAVE_S3C2410_WATCHDOG if WATCHDOG select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS help @@ -849,7 +870,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -883,6 +903,7 @@ config ARCH_SHARK select PCI select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -892,7 +913,6 @@ config ARCH_U300 depends on MMU select CLKSRC_MMIO select CPU_ARM926T - select HAVE_SCHED_CLOCK select HAVE_TCM select ARM_AMBA select ARM_PATCH_PHYS_VIRT @@ -951,7 +971,6 @@ config ARCH_OMAP select ARCH_HAS_CPUFREQ select CLKSRC_MMIO select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -1115,13 +1134,11 @@ config ARCH_ACORN config PLAT_IOP bool select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_SCHED_CLOCK config PLAT_PXA bool diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 66ca8014ff3e..85348a09d655 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -292,6 +292,22 @@ choice Note that the system will appear to hang during boot if there is nothing connected to read from the DCC. + config DEBUG_SEMIHOSTING + bool "Kernel low-level debug output via semihosting I" + help + Semihosting enables code running on an ARM target to use + the I/O facilities on a host debugger/emulator through a + simple SVC calls. The host debugger or emulator must have + semihosting enabled for the special svc call to be trapped + otherwise the kernel will crash. + + This is known to work with OpenOCD, as wellas + ARM's Fast Models, or any other controlling environment + that implements semihosting. + + For more details about semihosting, please see + chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. + endchoice config EARLY_PRINTK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0106f75530c0..047a20780fc1 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos +machine-$(CONFIG_ARCH_EXYNOS5) := exynos machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile @@ -252,6 +253,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ +core-y += arch/arm/net/ core-y += $(machdirs) $(platdirs) drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index fc871e719aae..c877087d2000 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -11,8 +11,6 @@ # Copyright (C) 1995-2002 Russell King # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif @@ -69,22 +67,19 @@ $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) clean-files := *.dtb -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ - -C none -a $(LOADADDR) -e $(STARTADDR) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ - -ifeq ($(CONFIG_ZBOOT_ROM),y) -$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) +ifneq ($(LOADADDR),) + UIMAGE_LOADADDR=$(LOADADDR) else -$(obj)/uImage: LOADADDR=$(ZRELADDR) + ifeq ($(CONFIG_ZBOOT_ROM),y) + UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) + else + UIMAGE_LOADADDR=$(ZRELADDR) + endif endif -$(obj)/uImage: STARTADDR=$(LOADADDR) - check_for_multiple_loadaddr = \ -if [ $(words $(LOADADDR)) -gt 1 ]; then \ - echo 'multiple load addresses: $(LOADADDR)'; \ +if [ $(words $(UIMAGE_LOADADDR)) -gt 1 ]; then \ + echo 'multiple load addresses: $(UIMAGE_LOADADDR)'; \ echo 'This is incompatible with uImages'; \ echo 'Specify LOADADDR on the commandline to build an uImage'; \ false; \ diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index e0936a148516..d0d441c429ae 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,8 +1,10 @@ +ashldi3.S font.c lib1funcs.S piggy.gzip piggy.lzo piggy.lzma +piggy.xzkern vmlinux vmlinux.lds diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index cf0a64ce4b83..bb267562e7ed 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -92,6 +92,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo suffix_$(CONFIG_KERNEL_LZMA) = lzma +suffix_$(CONFIG_KERNEL_XZ) = xzkern # Borrowed libfdt files for the ATAG compatibility mode @@ -112,10 +113,12 @@ endif targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS) + lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \ + font.o font.c head.o misc.o $(OBJS) # Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs) +extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \ + lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) @@ -151,6 +154,12 @@ lib1funcs = $(obj)/lib1funcs.o $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S $(call cmd,shipped) +# For __aeabi_llsl +ashldi3 = $(obj)/ashldi3.o + +$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S + $(call cmd,shipped) + # We need to prevent any GOTOFF relocs being used with references # to symbols in the .bss section since we cannot relocate them # independently from the rest at run time. This can be achieved by @@ -172,7 +181,7 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ fi $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ - $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE + $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index 07be5a2f8302..f41b38cafce8 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -44,6 +44,12 @@ extern void error(char *); #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_XZ +#define memmove memmove +#define memcpy memcpy +#include "../../../../lib/decompress_unxz.c" +#endif + int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) { return decompress(input, len, NULL, NULL, output, NULL, error); diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S new file mode 100644 index 000000000000..5703f300d027 --- /dev/null +++ b/arch/arm/boot/compressed/piggy.xzkern.S @@ -0,0 +1,6 @@ + .section .piggydata,#alloc + .globl input_data +input_data: + .incbin "arch/arm/boot/compressed/piggy.xzkern" + .globl input_data_end +input_data_end: diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index a100db03ec90..799ad1889b51 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -35,7 +35,7 @@ }; }; - memory@20000000 { + memory { reg = <0x20000000 0x08000000>; }; @@ -59,6 +59,26 @@ reg = <0xfffff000 0x200>; }; + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; @@ -171,6 +191,49 @@ interrupts = <21 4>; status = "disabled"; }; + + usb1: gadget@fffa4000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffa4000 0x4000>; + interrupts = <10 4>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe800 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioC 13 0 + &pioC 14 0 + 0 + >; + status = "disabled"; }; + + usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <20 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index e64eb932083b..7829a4d0cb22 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { @@ -33,5 +33,17 @@ status = "okay"; }; }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index f779667159b1..9e6eb6ecea0e 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -36,7 +36,7 @@ }; }; - memory@70000000 { + memory { reg = <0x70000000 0x10000000>; }; @@ -60,6 +60,22 @@ reg = <0xfffff000 0x200>; }; + ramc0: ramc@ffffe400 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe400 0x200 + 0xffffe600 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffd00 0x10>; + }; + pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; @@ -67,6 +83,11 @@ }; + shdwc@fffffd10 { + compatible = "atmel,at91sam9rl-shdwc"; + reg = <0xfffffd10 0x10>; + }; + tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; @@ -180,5 +201,48 @@ status = "disabled"; }; }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe200 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioC 8 0 + &pioC 14 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00700000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00700000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + + usb1: ehci@00800000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00800000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 20 0 /* sda */ + &pioA 21 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 15e25f903cad..a3633bd13111 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -14,13 +14,24 @@ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; - memory@70000000 { + memory { reg = <0x70000000 0x4000000>; }; + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + ahb { apb { dbgu: serial@ffffee00 { @@ -36,6 +47,39 @@ status = "okay"; }; }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "bootstrap/uboot/kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + data@4000000 { + label = "data"; + reg = <0x4000000 0xC000000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 1 1 + &pioD 3 1>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a02e636d8a57..70ab3a4e026f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -34,7 +34,7 @@ }; }; - memory@20000000 { + memory { reg = <0x20000000 0x10000000>; }; @@ -58,6 +58,26 @@ reg = <0xfffff000 0x200>; }; + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffe00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + }; + + shdwc@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; @@ -172,5 +192,73 @@ status = "disabled"; }; }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioD 5 0 + &pioD 4 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + + usb1: ehci@00700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <22 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 30 0 /* sda */ + &pioA 31 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@1 { + compatible = "i2c-gpio"; + gpios = <&pioC 0 0 /* sda */ + &pioC 1 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@2 { + compatible = "i2c-gpio"; + gpios = <&pioB 4 0 /* sda */ + &pioB 5 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 64ae3e890259..31e7be23703d 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -8,10 +8,55 @@ */ / { - memory@20000000 { + memory { reg = <0x20000000 0x8000000>; }; + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi new file mode 100644 index 000000000000..d73dce645667 --- /dev/null +++ b/arch/arm/boot/dts/db8500.dtsi @@ -0,0 +1,275 @@ +/* + * Copyright 2012 Linaro Ltd + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + soc-u9500 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "stericsson,db8500"; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@a0411000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + interrupt-parent; + reg = <0xa0411000 0x1000>, + <0xa0410100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xa0412000 0x1000>; + interrupts = <0 13 4>; + cache-unified; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 7 0x4>; + }; + + timer@a0410600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xa0410600 0x20>; + interrupts = <1 13 0x304>; + }; + + rtc@80154000 { + compatible = "stericsson,db8500-rtc"; + reg = <0x80154000 0x1000>; + interrupts = <0 18 0x4>; + }; + + gpio0: gpio@8012e000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8012e000 0x80>; + interrupts = <0 119 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio1: gpio@8012e080 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio2: gpio@8000e000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e000 0x80>; + interrupts = <0 121 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio3: gpio@8000e080 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e080 0x80>; + interrupts = <0 122 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio4: gpio@8000e100 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e100 0x80>; + interrupts = <0 123 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio5: gpio@8000e180 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8000e180 0x80>; + interrupts = <0 124 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio6: gpio@8011e000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8011e000 0x80>; + interrupts = <0 125 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio7: gpio@8011e080 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0x8011e080 0x80>; + interrupts = <0 126 0x4>; + supports-sleepmode; + gpio-controller; + }; + + gpio8: gpio@a03fe000 { + compatible = "stericsson,db8500-gpio", + "stmicroelectronics,nomadik-gpio"; + reg = <0xa03fe000 0x80>; + interrupts = <0 127 0x4>; + supports-sleepmode; + gpio-controller; + }; + + usb@a03e0000 { + compatible = "stericsson,db8500-musb", + "mentor,musb"; + reg = <0xa03e0000 0x10000>; + interrupts = <0 23 0x4>; + }; + + dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", + "stericsson,dma40"; + reg = <0x801C0000 0x1000 0x40010000 0x800>; + interrupts = <0 25 0x4>; + }; + + prcmu@80157000 { + compatible = "stericsson,db8500-prcmu"; + reg = <0x80157000 0x1000>; + interrupts = <46 47>; + #address-cells = <1>; + #size-cells = <0>; + + ab8500@5 { + compatible = "stericsson,ab8500"; + reg = <5>; /* mailbox 5 is i2c */ + interrupts = <0 40 0x4>; + }; + }; + + i2c@80004000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80004000 0x1000>; + interrupts = <0 21 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80122000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80122000 0x1000>; + interrupts = <0 22 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80128000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80128000 0x1000>; + interrupts = <0 55 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80110000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x80110000 0x1000>; + interrupts = <0 12 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@8012a000 { + compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c"; + reg = <0x8012a000 0x1000>; + interrupts = <0 51 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ssp@80002000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <80002000 0x1000>; + interrupts = <0 14 0x4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + // Add one of these for each child device + cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>; + + }; + + uart@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 0x4>; + status = "disabled"; + }; + uart@80121000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80121000 0x1000>; + interrupts = <0 19 0x4>; + status = "disabled"; + }; + uart@80007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80007000 0x1000>; + interrupts = <0 26 0x4>; + status = "disabled"; + }; + + sdi@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80126000 0x1000>; + interrupts = <0 60 0x4>; + status = "disabled"; + }; + sdi@80118000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80118000 0x1000>; + interrupts = <0 50 0x4>; + status = "disabled"; + }; + sdi@80005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80005000 0x1000>; + interrupts = <0 41 0x4>; + status = "disabled"; + }; + sdi@80119000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80119000 0x1000>; + interrupts = <0 59 0x4>; + status = "disabled"; + }; + sdi@80114000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + sdi@80008000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <0 100 0x4>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts new file mode 100644 index 000000000000..399d17b231d2 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -0,0 +1,26 @@ +/* + * SAMSUNG SMDK5250 board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" + +/ { + model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; + compatible = "samsung,smdk5250", "samsung,exynos5250"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi new file mode 100644 index 000000000000..dfc433599436 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -0,0 +1,413 @@ +/* + * SAMSUNG EXYNOS5250 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. + * EXYNOS5250 based board files can include this file and provide + * values for board specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos5250"; + interrupt-parent = <&gic>; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + }; + + sdhci@12200000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12200000 0x100>; + interrupts = <0 75 0>; + }; + + sdhci@12210000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12210000 0x100>; + interrupts = <0 76 0>; + }; + + sdhci@12220000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12220000 0x100>; + interrupts = <0 77 0>; + }; + + sdhci@12230000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12230000 0x100>; + interrupts = <0 78 0>; + }; + + serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; + + serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; + + serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; + + serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; + + i2c@12C60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + }; + + i2c@12C70000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + }; + + i2c@12C80000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@12C90000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@12CA0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CA0000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@12CB0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CB0000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@12CC0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CC0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@12CD0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CD0000 0x100>; + interrupts = <0 63 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + }; + + mdma0: pdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + }; + + mdma1: pdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + }; + }; + + gpio-controllers { + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + ranges; + + gpa0: gpio-controller@11400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + }; + + gpa1: gpio-controller@11400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400020 0x20>; + #gpio-cells = <4>; + }; + + gpa2: gpio-controller@11400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400040 0x20>; + #gpio-cells = <4>; + }; + + gpb0: gpio-controller@11400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400060 0x20>; + #gpio-cells = <4>; + }; + + gpb1: gpio-controller@11400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400080 0x20>; + #gpio-cells = <4>; + }; + + gpb2: gpio-controller@114000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000A0 0x20>; + #gpio-cells = <4>; + }; + + gpb3: gpio-controller@114000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000C0 0x20>; + #gpio-cells = <4>; + }; + + gpc0: gpio-controller@114000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000E0 0x20>; + #gpio-cells = <4>; + }; + + gpc1: gpio-controller@11400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400100 0x20>; + #gpio-cells = <4>; + }; + + gpc2: gpio-controller@11400120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400120 0x20>; + #gpio-cells = <4>; + }; + + gpc3: gpio-controller@11400140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400140 0x20>; + #gpio-cells = <4>; + }; + + gpd0: gpio-controller@11400160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400160 0x20>; + #gpio-cells = <4>; + }; + + gpd1: gpio-controller@11400180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400180 0x20>; + #gpio-cells = <4>; + }; + + gpy0: gpio-controller@114001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001A0 0x20>; + #gpio-cells = <4>; + }; + + gpy1: gpio-controller@114001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001C0 0x20>; + #gpio-cells = <4>; + }; + + gpy2: gpio-controller@114001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001E0 0x20>; + #gpio-cells = <4>; + }; + + gpy3: gpio-controller@11400200 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400200 0x20>; + #gpio-cells = <4>; + }; + + gpy4: gpio-controller@11400220 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400220 0x20>; + #gpio-cells = <4>; + }; + + gpy5: gpio-controller@11400240 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400240 0x20>; + #gpio-cells = <4>; + }; + + gpy6: gpio-controller@11400260 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400260 0x20>; + #gpio-cells = <4>; + }; + + gpx0: gpio-controller@11400C00 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C00 0x20>; + #gpio-cells = <4>; + }; + + gpx1: gpio-controller@11400C20 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C20 0x20>; + #gpio-cells = <4>; + }; + + gpx2: gpio-controller@11400C40 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C40 0x20>; + #gpio-cells = <4>; + }; + + gpx3: gpio-controller@11400C60 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400C60 0x20>; + #gpio-cells = <4>; + }; + + gpe0: gpio-controller@13400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400000 0x20>; + #gpio-cells = <4>; + }; + + gpe1: gpio-controller@13400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400020 0x20>; + #gpio-cells = <4>; + }; + + gpf0: gpio-controller@13400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400040 0x20>; + #gpio-cells = <4>; + }; + + gpf1: gpio-controller@13400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400060 0x20>; + #gpio-cells = <4>; + }; + + gpg0: gpio-controller@13400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400080 0x20>; + #gpio-cells = <4>; + }; + + gpg1: gpio-controller@134000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x134000A0 0x20>; + #gpio-cells = <4>; + }; + + gpg2: gpio-controller@134000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x134000C0 0x20>; + #gpio-cells = <4>; + }; + + gph0: gpio-controller@134000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x134000E0 0x20>; + #gpio-cells = <4>; + }; + + gph1: gpio-controller@13400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x13400100 0x20>; + #gpio-cells = <4>; + }; + + gpv0: gpio-controller@10D10000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10000 0x20>; + #gpio-cells = <4>; + }; + + gpv1: gpio-controller@10D10020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10020 0x20>; + #gpio-cells = <4>; + }; + + gpv2: gpio-controller@10D10040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10040 0x20>; + #gpio-cells = <4>; + }; + + gpv3: gpio-controller@10D10060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10060 0x20>; + #gpio-cells = <4>; + }; + + gpv4: gpio-controller@10D10080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x10D10080 0x20>; + #gpio-cells = <4>; + }; + + gpz: gpio-controller@03860000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x03860000 0x20>; + #gpio-cells = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 8a5dff807b45..a5376b84227f 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -4,7 +4,7 @@ / { model = "Globalscale Technologies Dreamplug"; - compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; memory { device_type = "memory"; @@ -15,11 +15,10 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; - serial@f1012000 { - compatible = "ns16550a"; - reg = <0xf1012000 0xff>; - reg-shift = <2>; - interrupts = <33>; - clock-frequency = <200000000>; + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 771c6bbeb29a..3474ef890945 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,6 +1,36 @@ /include/ "skeleton.dtsi" / { - compatible = "marvell,kirkwood"; -}; + compatible = "mrvl,kirkwood"; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <33>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <34>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + rtc@10300 { + compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts new file mode 100644 index 000000000000..359c6d679156 --- /dev/null +++ b/arch/arm/boot/dts/snowball.dts @@ -0,0 +1,139 @@ +/* + * Copyright 2011 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "db8500.dtsi" + +/ { + model = "Calao Systems Snowball platform with device tree"; + compatible = "calaosystems,snowball-a9500"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <2>; + label = "userpb"; + gpios = <&gpio1 0>; + }; + button@2 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <3>; + label = "userpb"; + gpios = <&gpio4 23>; + }; + button@3 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <4>; + label = "userpb"; + gpios = <&gpio4 23>; + }; + button@4 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <5>; + label = "userpb"; + gpios = <&gpio5 1>; + }; + button@5 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <6>; + label = "userpb"; + gpios = <&gpio5 2>; + }; + }; + + leds { + compatible = "gpio-leds"; + used-led { + label = "user_led"; + gpios = <&gpio4 14>; + }; + }; + + soc-u9500 { + + external-bus@50000000 { + compatible = "simple-bus"; + reg = <0x50000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ethernet@50000000 { + compatible = "smsc,9111"; + reg = <0x50000000 0x10000>; + interrupts = <12>; + interrupt-parent = <&gpio4>; + }; + }; + + sdi@80126000 { + status = "enabled"; + cd-gpios = <&gpio6 26>; + }; + + sdi@80114000 { + status = "enabled"; + }; + + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + //compatible = "tc3589x"; + reg = <0x42>; + interrupts = <25>; + interrupt-parent = <&gpio6>; + }; + tps61052@33 { + //compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + // compatible = "lp5521"; + reg = <0x33>; + }; + lp5521@0x34 { + // compatible = "lp5521"; + reg = <0x34>; + }; + bh1780@0x29 { + // compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts new file mode 100644 index 000000000000..636292e18c90 --- /dev/null +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -0,0 +1,47 @@ +/* + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear600.dtsi" + +/ { + model = "ST SPEAr600 Evaluation Board"; + compatible = "st,spear600-evb", "st,spear600"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x10000000>; + }; + + ahb { + gmac: ethernet@e0800000 { + phy-mode = "gmii"; + status = "okay"; + }; + + apb { + serial@d0000000 { + status = "okay"; + }; + + serial@d0080000 { + status = "okay"; + }; + + i2c@d0200000 { + clock-frequency = <400000>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi new file mode 100644 index 000000000000..ebe0885a2b98 --- /dev/null +++ b/arch/arm/boot/dts/spear600.dtsi @@ -0,0 +1,174 @@ +/* + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "st,spear600"; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + vic0: interrupt-controller@f1100000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f1000000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1000000 0x1000>; + #interrupt-cells = <1>; + }; + + gmac: ethernet@e0800000 { + compatible = "st,spear600-gmac"; + reg = <0xe0800000 0x8000>; + interrupt-parent = <&vic1>; + interrupts = <24 23>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + fsmc: flash@d1800000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd1800000 0x1000 /* FSMC Register */ + 0xd2000000 0x4000>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + status = "disabled"; + }; + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + status = "disabled"; + }; + + ehci@e2000000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe2000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <29>; + status = "disabled"; + }; + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1900000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + status = "disabled"; + }; + + ohci@e2100000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + serial@d0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0000000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <24>; + status = "disabled"; + }; + + serial@d0080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0080000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <25>; + status = "disabled"; + }; + + /* local/cpu GPIO */ + gpio0: gpio@f0100000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xf0100000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + }; + + /* basic GPIO */ + gpio1: gpio@fc980000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfc980000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + }; + + /* appl GPIO */ + gpio2: gpio@d8100000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xd8100000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <4>; + }; + + i2c@d0200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xd0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <28>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index 73263501f581..ac3fb7558459 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -14,6 +14,22 @@ clock-frequency = < 408000000 >; }; + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + + serial@70006300 { + status = "disable"; + }; + + serial@70006400 { + status = "disable"; + }; + i2c@7000c000 { clock-frequency = <100000>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 876d5c92ce36..dbf1c5a171c2 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -112,6 +112,7 @@ usb@c5000000 { nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + dr_mode = "otg"; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index aff8a175aa40..108e894a8926 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -190,6 +190,7 @@ reg = <0xc5000000 0x4000>; interrupts = < 0 20 0x04 >; phy_type = "utmi"; + nvidia,has-legacy-mode; }; usb@c5004000 { diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi new file mode 100644 index 000000000000..ad3eca17c436 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -0,0 +1,96 @@ +/* + * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/ { + ahb { + apb { + usart1: serial@fffb4000 { + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + }; + }; + + i2c-gpio@0 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "user_led1"; + gpios = <&pioB 20 1>; + }; + +/* +* led already used by mother board but active as high +* user_led2 { +* label = "user_led2"; +* gpios = <&pioB 21 1>; +* }; +*/ + user_led3 { + label = "user_led3"; + gpios = <&pioB 22 1>; + }; + + user_led4 { + label = "user_led4"; + gpios = <&pioB 23 1>; + }; + + red { + label = "red"; + gpios = <&pioB 24 1>; + }; + + orange { + label = "orange"; + gpios = <&pioB 30 1>; + }; + + green { + label = "green"; + gpios = <&pioB 31 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb1 { + label = "user_pb1"; + gpios = <&pioB 25 1>; + linux,code = <0x100>; + }; + + user_pb2 { + label = "user_pb2"; + gpios = <&pioB 13 1>; + linux,code = <0x101>; + }; + + user_pb3 { + label = "user_pb3"; + gpios = <&pioA 26 1>; + linux,code = <0x102>; + }; + + user_pb4 { + label = "user_pb4"; + gpios = <&pioC 9 1>; + linux,code = <0x103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index d74545a2a77c..7c2399c532e5 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -13,13 +13,24 @@ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory@20000000 { + memory { reg = <0x20000000 0x4000000>; }; + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + ahb { apb { dbgu: serial@fffff200 { @@ -30,6 +41,58 @@ phy-mode = "rmii"; status = "okay"; }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xa0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4a0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7ca0000 0x8360000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; }; }; @@ -55,4 +118,13 @@ gpio-key,wakeup; }; }; + + i2c@0 { + status = "okay"; + + rv3029c2@56 { + compatible = "rv3029c2"; + reg = <0x56>; + }; + }; }; diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 81a933eb0903..283fa1d804f4 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -24,9 +24,6 @@ config ARM_VIC_NR config ICST bool -config PL330 - bool - config SA1111 bool select DMABOUNCE if !ARCH_PXA @@ -35,9 +32,6 @@ config DMABOUNCE bool select ZONE_DMA -config TIMER_ACORN - bool - config SHARP_LOCOMO bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 6ea9b6f3607a..215816f1775f 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -5,11 +5,9 @@ obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST) += icst.o -obj-$(CONFIG_PL330) += pl330.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o -obj-$(CONFIG_TIMER_ACORN) += time-acorn.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index f0783be17352..aa5269984187 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -686,13 +686,12 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ - hwirq_base = 32; - if (gic_nr == 0) { - if ((irq_start & 31) > 0) { - hwirq_base = 16; - if (irq_start != -1) - irq_start = (irq_start & ~31) + 16; - } + if (gic_nr == 0 && (irq_start & 31) > 0) { + hwirq_base = 16; + if (irq_start != -1) + irq_start = (irq_start & ~31) + 16; + } else { + hwirq_base = 32; } /* diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c deleted file mode 100644 index ff3ad2244824..000000000000 --- a/arch/arm/common/pl330.c +++ /dev/null @@ -1,1960 +0,0 @@ -/* linux/arch/arm/common/pl330.c - * - * Copyright (C) 2010 Samsung Electronics Co Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> - -#include <asm/hardware/pl330.h> - -/* Register and Bit field Definitions */ -#define DS 0x0 -#define DS_ST_STOP 0x0 -#define DS_ST_EXEC 0x1 -#define DS_ST_CMISS 0x2 -#define DS_ST_UPDTPC 0x3 -#define DS_ST_WFE 0x4 -#define DS_ST_ATBRR 0x5 -#define DS_ST_QBUSY 0x6 -#define DS_ST_WFP 0x7 -#define DS_ST_KILL 0x8 -#define DS_ST_CMPLT 0x9 -#define DS_ST_FLTCMP 0xe -#define DS_ST_FAULT 0xf - -#define DPC 0x4 -#define INTEN 0x20 -#define ES 0x24 -#define INTSTATUS 0x28 -#define INTCLR 0x2c -#define FSM 0x30 -#define FSC 0x34 -#define FTM 0x38 - -#define _FTC 0x40 -#define FTC(n) (_FTC + (n)*0x4) - -#define _CS 0x100 -#define CS(n) (_CS + (n)*0x8) -#define CS_CNS (1 << 21) - -#define _CPC 0x104 -#define CPC(n) (_CPC + (n)*0x8) - -#define _SA 0x400 -#define SA(n) (_SA + (n)*0x20) - -#define _DA 0x404 -#define DA(n) (_DA + (n)*0x20) - -#define _CC 0x408 -#define CC(n) (_CC + (n)*0x20) - -#define CC_SRCINC (1 << 0) -#define CC_DSTINC (1 << 14) -#define CC_SRCPRI (1 << 8) -#define CC_DSTPRI (1 << 22) -#define CC_SRCNS (1 << 9) -#define CC_DSTNS (1 << 23) -#define CC_SRCIA (1 << 10) -#define CC_DSTIA (1 << 24) -#define CC_SRCBRSTLEN_SHFT 4 -#define CC_DSTBRSTLEN_SHFT 18 -#define CC_SRCBRSTSIZE_SHFT 1 -#define CC_DSTBRSTSIZE_SHFT 15 -#define CC_SRCCCTRL_SHFT 11 -#define CC_SRCCCTRL_MASK 0x7 -#define CC_DSTCCTRL_SHFT 25 -#define CC_DRCCCTRL_MASK 0x7 -#define CC_SWAP_SHFT 28 - -#define _LC0 0x40c -#define LC0(n) (_LC0 + (n)*0x20) - -#define _LC1 0x410 -#define LC1(n) (_LC1 + (n)*0x20) - -#define DBGSTATUS 0xd00 -#define DBG_BUSY (1 << 0) - -#define DBGCMD 0xd04 -#define DBGINST0 0xd08 -#define DBGINST1 0xd0c - -#define CR0 0xe00 -#define CR1 0xe04 -#define CR2 0xe08 -#define CR3 0xe0c -#define CR4 0xe10 -#define CRD 0xe14 - -#define PERIPH_ID 0xfe0 -#define PCELL_ID 0xff0 - -#define CR0_PERIPH_REQ_SET (1 << 0) -#define CR0_BOOT_EN_SET (1 << 1) -#define CR0_BOOT_MAN_NS (1 << 2) -#define CR0_NUM_CHANS_SHIFT 4 -#define CR0_NUM_CHANS_MASK 0x7 -#define CR0_NUM_PERIPH_SHIFT 12 -#define CR0_NUM_PERIPH_MASK 0x1f -#define CR0_NUM_EVENTS_SHIFT 17 -#define CR0_NUM_EVENTS_MASK 0x1f - -#define CR1_ICACHE_LEN_SHIFT 0 -#define CR1_ICACHE_LEN_MASK 0x7 -#define CR1_NUM_ICACHELINES_SHIFT 4 -#define CR1_NUM_ICACHELINES_MASK 0xf - -#define CRD_DATA_WIDTH_SHIFT 0 -#define CRD_DATA_WIDTH_MASK 0x7 -#define CRD_WR_CAP_SHIFT 4 -#define CRD_WR_CAP_MASK 0x7 -#define CRD_WR_Q_DEP_SHIFT 8 -#define CRD_WR_Q_DEP_MASK 0xf -#define CRD_RD_CAP_SHIFT 12 -#define CRD_RD_CAP_MASK 0x7 -#define CRD_RD_Q_DEP_SHIFT 16 -#define CRD_RD_Q_DEP_MASK 0xf -#define CRD_DATA_BUFF_SHIFT 20 -#define CRD_DATA_BUFF_MASK 0x3ff - -#define PART 0x330 -#define DESIGNER 0x41 -#define REVISION 0x0 -#define INTEG_CFG 0x0 -#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) - -#define PCELL_ID_VAL 0xb105f00d - -#define PL330_STATE_STOPPED (1 << 0) -#define PL330_STATE_EXECUTING (1 << 1) -#define PL330_STATE_WFE (1 << 2) -#define PL330_STATE_FAULTING (1 << 3) -#define PL330_STATE_COMPLETING (1 << 4) -#define PL330_STATE_WFP (1 << 5) -#define PL330_STATE_KILLING (1 << 6) -#define PL330_STATE_FAULT_COMPLETING (1 << 7) -#define PL330_STATE_CACHEMISS (1 << 8) -#define PL330_STATE_UPDTPC (1 << 9) -#define PL330_STATE_ATBARRIER (1 << 10) -#define PL330_STATE_QUEUEBUSY (1 << 11) -#define PL330_STATE_INVALID (1 << 15) - -#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ - | PL330_STATE_WFE | PL330_STATE_FAULTING) - -#define CMD_DMAADDH 0x54 -#define CMD_DMAEND 0x00 -#define CMD_DMAFLUSHP 0x35 -#define CMD_DMAGO 0xa0 -#define CMD_DMALD 0x04 -#define CMD_DMALDP 0x25 -#define CMD_DMALP 0x20 -#define CMD_DMALPEND 0x28 -#define CMD_DMAKILL 0x01 -#define CMD_DMAMOV 0xbc -#define CMD_DMANOP 0x18 -#define CMD_DMARMB 0x12 -#define CMD_DMASEV 0x34 -#define CMD_DMAST 0x08 -#define CMD_DMASTP 0x29 -#define CMD_DMASTZ 0x0c -#define CMD_DMAWFE 0x36 -#define CMD_DMAWFP 0x30 -#define CMD_DMAWMB 0x13 - -#define SZ_DMAADDH 3 -#define SZ_DMAEND 1 -#define SZ_DMAFLUSHP 2 -#define SZ_DMALD 1 -#define SZ_DMALDP 2 -#define SZ_DMALP 2 -#define SZ_DMALPEND 2 -#define SZ_DMAKILL 1 -#define SZ_DMAMOV 6 -#define SZ_DMANOP 1 -#define SZ_DMARMB 1 -#define SZ_DMASEV 2 -#define SZ_DMAST 1 -#define SZ_DMASTP 2 -#define SZ_DMASTZ 1 -#define SZ_DMAWFE 2 -#define SZ_DMAWFP 2 -#define SZ_DMAWMB 1 -#define SZ_DMAGO 6 - -#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) -#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) - -#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) -#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) - -/* - * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req - * at 1byte/burst for P<->M and M<->M respectively. - * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req - * should be enough for P<->M and M<->M respectively. - */ -#define MCODE_BUFF_PER_REQ 256 - -/* If the _pl330_req is available to the client */ -#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) - -/* Use this _only_ to wait on transient states */ -#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); - -#ifdef PL330_DEBUG_MCGEN -static unsigned cmd_line; -#define PL330_DBGCMD_DUMP(off, x...) do { \ - printk("%x:", cmd_line); \ - printk(x); \ - cmd_line += off; \ - } while (0) -#define PL330_DBGMC_START(addr) (cmd_line = addr) -#else -#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) -#define PL330_DBGMC_START(addr) do {} while (0) -#endif - -struct _xfer_spec { - u32 ccr; - struct pl330_req *r; - struct pl330_xfer *x; -}; - -enum dmamov_dst { - SAR = 0, - CCR, - DAR, -}; - -enum pl330_dst { - SRC = 0, - DST, -}; - -enum pl330_cond { - SINGLE, - BURST, - ALWAYS, -}; - -struct _pl330_req { - u32 mc_bus; - void *mc_cpu; - /* Number of bytes taken to setup MC for the req */ - u32 mc_len; - struct pl330_req *r; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; -}; - -/* ToBeDone for tasklet */ -struct _pl330_tbd { - bool reset_dmac; - bool reset_mngr; - u8 reset_chan; -}; - -/* A DMAC Thread */ -struct pl330_thread { - u8 id; - int ev; - /* If the channel is not yet acquired by any client */ - bool free; - /* Parent DMAC */ - struct pl330_dmac *dmac; - /* Only two at a time */ - struct _pl330_req req[2]; - /* Index of the last enqueued request */ - unsigned lstenq; - /* Index of the last submitted request or -1 if the DMA is stopped */ - int req_running; -}; - -enum pl330_dmac_state { - UNINIT, - INIT, - DYING, -}; - -/* A DMAC */ -struct pl330_dmac { - spinlock_t lock; - /* Holds list of reqs with due callbacks */ - struct list_head req_done; - /* Pointer to platform specific stuff */ - struct pl330_info *pinfo; - /* Maximum possible events/irqs */ - int events[32]; - /* BUS address of MicroCode buffer */ - u32 mcode_bus; - /* CPU address of MicroCode buffer */ - void *mcode_cpu; - /* List of all Channel threads */ - struct pl330_thread *channels; - /* Pointer to the MANAGER thread */ - struct pl330_thread *manager; - /* To handle bad news in interrupt */ - struct tasklet_struct tasks; - struct _pl330_tbd dmac_tbd; - /* State of DMAC operation */ - enum pl330_dmac_state state; -}; - -static inline void _callback(struct pl330_req *r, enum pl330_op_err err) -{ - if (r && r->xfer_cb) - r->xfer_cb(r->token, err); -} - -static inline bool _queue_empty(struct pl330_thread *thrd) -{ - return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) - ? true : false; -} - -static inline bool _queue_full(struct pl330_thread *thrd) -{ - return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) - ? false : true; -} - -static inline bool is_manager(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - - /* MANAGER is indexed at the end */ - if (thrd->id == pl330->pinfo->pcfg.num_chan) - return true; - else - return false; -} - -/* If manager of the thread is in Non-Secure mode */ -static inline bool _manager_ns(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - - return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; -} - -static inline u32 get_id(struct pl330_info *pi, u32 off) -{ - void __iomem *regs = pi->base; - u32 id = 0; - - id |= (readb(regs + off + 0x0) << 0); - id |= (readb(regs + off + 0x4) << 8); - id |= (readb(regs + off + 0x8) << 16); - id |= (readb(regs + off + 0xc) << 24); - - return id; -} - -static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], - enum pl330_dst da, u16 val) -{ - if (dry_run) - return SZ_DMAADDH; - - buf[0] = CMD_DMAADDH; - buf[0] |= (da << 1); - *((u16 *)&buf[1]) = val; - - PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", - da == 1 ? "DA" : "SA", val); - - return SZ_DMAADDH; -} - -static inline u32 _emit_END(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAEND; - - buf[0] = CMD_DMAEND; - - PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); - - return SZ_DMAEND; -} - -static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) -{ - if (dry_run) - return SZ_DMAFLUSHP; - - buf[0] = CMD_DMAFLUSHP; - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); - - return SZ_DMAFLUSHP; -} - -static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) -{ - if (dry_run) - return SZ_DMALD; - - buf[0] = CMD_DMALD; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); - - return SZ_DMALD; -} - -static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMALDP; - - buf[0] = CMD_DMALDP; - - if (cond == BURST) - buf[0] |= (1 << 1); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", - cond == SINGLE ? 'S' : 'B', peri >> 3); - - return SZ_DMALDP; -} - -static inline u32 _emit_LP(unsigned dry_run, u8 buf[], - unsigned loop, u8 cnt) -{ - if (dry_run) - return SZ_DMALP; - - buf[0] = CMD_DMALP; - - if (loop) - buf[0] |= (1 << 1); - - cnt--; /* DMAC increments by 1 internally */ - buf[1] = cnt; - - PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); - - return SZ_DMALP; -} - -struct _arg_LPEND { - enum pl330_cond cond; - bool forever; - unsigned loop; - u8 bjump; -}; - -static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], - const struct _arg_LPEND *arg) -{ - enum pl330_cond cond = arg->cond; - bool forever = arg->forever; - unsigned loop = arg->loop; - u8 bjump = arg->bjump; - - if (dry_run) - return SZ_DMALPEND; - - buf[0] = CMD_DMALPEND; - - if (loop) - buf[0] |= (1 << 2); - - if (!forever) - buf[0] |= (1 << 4); - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - buf[1] = bjump; - - PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", - forever ? "FE" : "END", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), - loop ? '1' : '0', - bjump); - - return SZ_DMALPEND; -} - -static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAKILL; - - buf[0] = CMD_DMAKILL; - - return SZ_DMAKILL; -} - -static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], - enum dmamov_dst dst, u32 val) -{ - if (dry_run) - return SZ_DMAMOV; - - buf[0] = CMD_DMAMOV; - buf[1] = dst; - *((u32 *)&buf[2]) = val; - - PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", - dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); - - return SZ_DMAMOV; -} - -static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMANOP; - - buf[0] = CMD_DMANOP; - - PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); - - return SZ_DMANOP; -} - -static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMARMB; - - buf[0] = CMD_DMARMB; - - PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); - - return SZ_DMARMB; -} - -static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) -{ - if (dry_run) - return SZ_DMASEV; - - buf[0] = CMD_DMASEV; - - ev &= 0x1f; - ev <<= 3; - buf[1] = ev; - - PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); - - return SZ_DMASEV; -} - -static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) -{ - if (dry_run) - return SZ_DMAST; - - buf[0] = CMD_DMAST; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); - - return SZ_DMAST; -} - -static inline u32 _emit_STP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMASTP; - - buf[0] = CMD_DMASTP; - - if (cond == BURST) - buf[0] |= (1 << 1); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", - cond == SINGLE ? 'S' : 'B', peri >> 3); - - return SZ_DMASTP; -} - -static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMASTZ; - - buf[0] = CMD_DMASTZ; - - PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); - - return SZ_DMASTZ; -} - -static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, - unsigned invalidate) -{ - if (dry_run) - return SZ_DMAWFE; - - buf[0] = CMD_DMAWFE; - - ev &= 0x1f; - ev <<= 3; - buf[1] = ev; - - if (invalidate) - buf[1] |= (1 << 1); - - PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", - ev >> 3, invalidate ? ", I" : ""); - - return SZ_DMAWFE; -} - -static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMAWFP; - - buf[0] = CMD_DMAWFP; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (0 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (0 << 0); - else - buf[0] |= (0 << 1) | (1 << 0); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); - - return SZ_DMAWFP; -} - -static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAWMB; - - buf[0] = CMD_DMAWMB; - - PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); - - return SZ_DMAWMB; -} - -struct _arg_GO { - u8 chan; - u32 addr; - unsigned ns; -}; - -static inline u32 _emit_GO(unsigned dry_run, u8 buf[], - const struct _arg_GO *arg) -{ - u8 chan = arg->chan; - u32 addr = arg->addr; - unsigned ns = arg->ns; - - if (dry_run) - return SZ_DMAGO; - - buf[0] = CMD_DMAGO; - buf[0] |= (ns << 1); - - buf[1] = chan & 0x7; - - *((u32 *)&buf[2]) = addr; - - return SZ_DMAGO; -} - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -/* Returns Time-Out */ -static bool _until_dmac_idle(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - unsigned long loops = msecs_to_loops(5); - - do { - /* Until Manager is Idle */ - if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) - break; - - cpu_relax(); - } while (--loops); - - if (!loops) - return true; - - return false; -} - -static inline void _execute_DBGINSN(struct pl330_thread *thrd, - u8 insn[], bool as_manager) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 val; - - val = (insn[0] << 16) | (insn[1] << 24); - if (!as_manager) { - val |= (1 << 0); - val |= (thrd->id << 8); /* Channel Number */ - } - writel(val, regs + DBGINST0); - - val = *((u32 *)&insn[2]); - writel(val, regs + DBGINST1); - - /* If timed out due to halted state-machine */ - if (_until_dmac_idle(thrd)) { - dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); - return; - } - - /* Get going */ - writel(0, regs + DBGCMD); -} - -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -static void mark_free(struct pl330_thread *thrd, int idx) -{ - struct _pl330_req *req = &thrd->req[idx]; - - _emit_END(0, req->mc_cpu); - req->mc_len = 0; - - thrd->req_running = -1; -} - -static inline u32 _state(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 val; - - if (is_manager(thrd)) - val = readl(regs + DS) & 0xf; - else - val = readl(regs + CS(thrd->id)) & 0xf; - - switch (val) { - case DS_ST_STOP: - return PL330_STATE_STOPPED; - case DS_ST_EXEC: - return PL330_STATE_EXECUTING; - case DS_ST_CMISS: - return PL330_STATE_CACHEMISS; - case DS_ST_UPDTPC: - return PL330_STATE_UPDTPC; - case DS_ST_WFE: - return PL330_STATE_WFE; - case DS_ST_FAULT: - return PL330_STATE_FAULTING; - case DS_ST_ATBRR: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_ATBARRIER; - case DS_ST_QBUSY: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_QUEUEBUSY; - case DS_ST_WFP: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_WFP; - case DS_ST_KILL: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_KILLING; - case DS_ST_CMPLT: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_COMPLETING; - case DS_ST_FLTCMP: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_FAULT_COMPLETING; - default: - return PL330_STATE_INVALID; - } -} - -static void _stop(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u8 insn[6] = {0, 0, 0, 0, 0, 0}; - - if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) - UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); - - /* Return if nothing needs to be done */ - if (_state(thrd) == PL330_STATE_COMPLETING - || _state(thrd) == PL330_STATE_KILLING - || _state(thrd) == PL330_STATE_STOPPED) - return; - - _emit_KILL(0, insn); - - /* Stop generating interrupts for SEV */ - writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); - - _execute_DBGINSN(thrd, insn, is_manager(thrd)); -} - -/* Start doing req 'idx' of thread 'thrd' */ -static bool _trigger(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - struct _pl330_req *req; - struct pl330_req *r; - struct _arg_GO go; - unsigned ns; - u8 insn[6] = {0, 0, 0, 0, 0, 0}; - int idx; - - /* Return if already ACTIVE */ - if (_state(thrd) != PL330_STATE_STOPPED) - return true; - - idx = 1 - thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) - req = &thrd->req[idx]; - else { - idx = thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) - req = &thrd->req[idx]; - else - req = NULL; - } - - /* Return if no request */ - if (!req || !req->r) - return true; - - r = req->r; - - if (r->cfg) - ns = r->cfg->nonsecure ? 1 : 0; - else if (readl(regs + CS(thrd->id)) & CS_CNS) - ns = 1; - else - ns = 0; - - /* See 'Abort Sources' point-4 at Page 2-25 */ - if (_manager_ns(thrd) && !ns) - dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", - __func__, __LINE__); - - go.chan = thrd->id; - go.addr = req->mc_bus; - go.ns = ns; - _emit_GO(0, insn, &go); - - /* Set to generate interrupts for SEV */ - writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); - - /* Only manager can execute GO */ - _execute_DBGINSN(thrd, insn, true); - - thrd->req_running = idx; - - return true; -} - -static bool _start(struct pl330_thread *thrd) -{ - switch (_state(thrd)) { - case PL330_STATE_FAULT_COMPLETING: - UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); - - if (_state(thrd) == PL330_STATE_KILLING) - UNTIL(thrd, PL330_STATE_STOPPED) - - case PL330_STATE_FAULTING: - _stop(thrd); - - case PL330_STATE_KILLING: - case PL330_STATE_COMPLETING: - UNTIL(thrd, PL330_STATE_STOPPED) - - case PL330_STATE_STOPPED: - return _trigger(thrd); - - case PL330_STATE_WFP: - case PL330_STATE_QUEUEBUSY: - case PL330_STATE_ATBARRIER: - case PL330_STATE_UPDTPC: - case PL330_STATE_CACHEMISS: - case PL330_STATE_EXECUTING: - return true; - - case PL330_STATE_WFE: /* For RESUME, nothing yet */ - default: - return false; - } -} - -static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_RMB(dry_run, &buf[off]); - off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_WMB(dry_run, &buf[off]); - } - - return off; -} - -static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); - } - - return off; -} - -static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); - } - - return off; -} - -static int _bursts(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - switch (pxs->r->rqtype) { - case MEMTODEV: - off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); - break; - case DEVTOMEM: - off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); - break; - case MEMTOMEM: - off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); - break; - default: - off += 0x40000000; /* Scare off the Client */ - break; - } - - return off; -} - -/* Returns bytes consumed and updates bursts */ -static inline int _loop(unsigned dry_run, u8 buf[], - unsigned long *bursts, const struct _xfer_spec *pxs) -{ - int cyc, cycmax, szlp, szlpend, szbrst, off; - unsigned lcnt0, lcnt1, ljmp0, ljmp1; - struct _arg_LPEND lpend; - - /* Max iterations possible in DMALP is 256 */ - if (*bursts >= 256*256) { - lcnt1 = 256; - lcnt0 = 256; - cyc = *bursts / lcnt1 / lcnt0; - } else if (*bursts > 256) { - lcnt1 = 256; - lcnt0 = *bursts / lcnt1; - cyc = 1; - } else { - lcnt1 = *bursts; - lcnt0 = 0; - cyc = 1; - } - - szlp = _emit_LP(1, buf, 0, 0); - szbrst = _bursts(1, buf, pxs, 1); - - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 0; - lpend.bjump = 0; - szlpend = _emit_LPEND(1, buf, &lpend); - - if (lcnt0) { - szlp *= 2; - szlpend *= 2; - } - - /* - * Max bursts that we can unroll due to limit on the - * size of backward jump that can be encoded in DMALPEND - * which is 8-bits and hence 255 - */ - cycmax = (255 - (szlp + szlpend)) / szbrst; - - cyc = (cycmax < cyc) ? cycmax : cyc; - - off = 0; - - if (lcnt0) { - off += _emit_LP(dry_run, &buf[off], 0, lcnt0); - ljmp0 = off; - } - - off += _emit_LP(dry_run, &buf[off], 1, lcnt1); - ljmp1 = off; - - off += _bursts(dry_run, &buf[off], pxs, cyc); - - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 1; - lpend.bjump = off - ljmp1; - off += _emit_LPEND(dry_run, &buf[off], &lpend); - - if (lcnt0) { - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 0; - lpend.bjump = off - ljmp0; - off += _emit_LPEND(dry_run, &buf[off], &lpend); - } - - *bursts = lcnt1 * cyc; - if (lcnt0) - *bursts *= lcnt0; - - return off; -} - -static inline int _setup_loops(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs) -{ - struct pl330_xfer *x = pxs->x; - u32 ccr = pxs->ccr; - unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); - int off = 0; - - while (bursts) { - c = bursts; - off += _loop(dry_run, &buf[off], &c, pxs); - bursts -= c; - } - - return off; -} - -static inline int _setup_xfer(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs) -{ - struct pl330_xfer *x = pxs->x; - int off = 0; - - /* DMAMOV SAR, x->src_addr */ - off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); - /* DMAMOV DAR, x->dst_addr */ - off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); - - /* Setup Loop(s) */ - off += _setup_loops(dry_run, &buf[off], pxs); - - return off; -} - -/* - * A req is a sequence of one or more xfer units. - * Returns the number of bytes taken to setup the MC for the req. - */ -static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, - unsigned index, struct _xfer_spec *pxs) -{ - struct _pl330_req *req = &thrd->req[index]; - struct pl330_xfer *x; - u8 *buf = req->mc_cpu; - int off = 0; - - PL330_DBGMC_START(req->mc_bus); - - /* DMAMOV CCR, ccr */ - off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); - - x = pxs->r->x; - do { - /* Error if xfer length is not aligned at burst size */ - if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) - return -EINVAL; - - pxs->x = x; - off += _setup_xfer(dry_run, &buf[off], pxs); - - x = x->next; - } while (x); - - /* DMASEV peripheral/event */ - off += _emit_SEV(dry_run, &buf[off], thrd->ev); - /* DMAEND */ - off += _emit_END(dry_run, &buf[off]); - - return off; -} - -static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) -{ - u32 ccr = 0; - - if (rqc->src_inc) - ccr |= CC_SRCINC; - - if (rqc->dst_inc) - ccr |= CC_DSTINC; - - /* We set same protection levels for Src and DST for now */ - if (rqc->privileged) - ccr |= CC_SRCPRI | CC_DSTPRI; - if (rqc->nonsecure) - ccr |= CC_SRCNS | CC_DSTNS; - if (rqc->insnaccess) - ccr |= CC_SRCIA | CC_DSTIA; - - ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); - ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); - - ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); - ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); - - ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); - ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); - - ccr |= (rqc->swap << CC_SWAP_SHFT); - - return ccr; -} - -static inline bool _is_valid(u32 ccr) -{ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - - dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; - scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; - - if (dcctl == DINVALID1 || dcctl == DINVALID2 - || scctl == SINVALID1 || scctl == SINVALID2) - return false; - else - return true; -} - -/* - * Submit a list of xfers after which the client wants notification. - * Client is not notified after each xfer unit, just once after all - * xfer units are done or some error occurs. - */ -int pl330_submit_req(void *ch_id, struct pl330_req *r) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; - struct _xfer_spec xs; - unsigned long flags; - void __iomem *regs; - unsigned idx; - u32 ccr; - int ret = 0; - - /* No Req or Unacquired Channel or DMAC */ - if (!r || !thrd || thrd->free) - return -EINVAL; - - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; - - if (pl330->state == DYING - || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { - dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", - __func__, __LINE__); - return -EAGAIN; - } - - /* If request for non-existing peripheral */ - if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Invalid peripheral(%u)!\n", - __func__, __LINE__, r->peri); - return -EINVAL; - } - - spin_lock_irqsave(&pl330->lock, flags); - - if (_queue_full(thrd)) { - ret = -EAGAIN; - goto xfer_exit; - } - - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; - - /* Use last settings, if not provided */ - if (r->cfg) - ccr = _prepare_ccr(r->cfg); - else - ccr = readl(regs + CC(thrd->id)); - - /* If this req doesn't have valid xfer settings */ - if (!_is_valid(ccr)) { - ret = -EINVAL; - dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", - __func__, __LINE__, ccr); - goto xfer_exit; - } - - idx = IS_FREE(&thrd->req[0]) ? 0 : 1; - - xs.ccr = ccr; - xs.r = r; - - /* First dry run to check if req is acceptable */ - ret = _setup_req(1, thrd, idx, &xs); - if (ret < 0) - goto xfer_exit; - - if (ret > pi->mcbufsz / 2) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Trying increasing mcbufsz\n", - __func__, __LINE__); - ret = -ENOMEM; - goto xfer_exit; - } - - /* Hook the request */ - thrd->lstenq = idx; - thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); - thrd->req[idx].r = r; - - ret = 0; - -xfer_exit: - spin_unlock_irqrestore(&pl330->lock, flags); - - return ret; -} -EXPORT_SYMBOL(pl330_submit_req); - -static void pl330_dotask(unsigned long data) -{ - struct pl330_dmac *pl330 = (struct pl330_dmac *) data; - struct pl330_info *pi = pl330->pinfo; - unsigned long flags; - int i; - - spin_lock_irqsave(&pl330->lock, flags); - - /* The DMAC itself gone nuts */ - if (pl330->dmac_tbd.reset_dmac) { - pl330->state = DYING; - /* Reset the manager too */ - pl330->dmac_tbd.reset_mngr = true; - /* Clear the reset flag */ - pl330->dmac_tbd.reset_dmac = false; - } - - if (pl330->dmac_tbd.reset_mngr) { - _stop(pl330->manager); - /* Reset all channels */ - pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; - /* Clear the reset flag */ - pl330->dmac_tbd.reset_mngr = false; - } - - for (i = 0; i < pi->pcfg.num_chan; i++) { - - if (pl330->dmac_tbd.reset_chan & (1 << i)) { - struct pl330_thread *thrd = &pl330->channels[i]; - void __iomem *regs = pi->base; - enum pl330_op_err err; - - _stop(thrd); - - if (readl(regs + FSC) & (1 << thrd->id)) - err = PL330_ERR_FAIL; - else - err = PL330_ERR_ABORT; - - spin_unlock_irqrestore(&pl330->lock, flags); - - _callback(thrd->req[1 - thrd->lstenq].r, err); - _callback(thrd->req[thrd->lstenq].r, err); - - spin_lock_irqsave(&pl330->lock, flags); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - - /* Clear the reset flag */ - pl330->dmac_tbd.reset_chan &= ~(1 << i); - } - } - - spin_unlock_irqrestore(&pl330->lock, flags); - - return; -} - -/* Returns 1 if state was updated, 0 otherwise */ -int pl330_update(const struct pl330_info *pi) -{ - struct _pl330_req *rqdone; - struct pl330_dmac *pl330; - unsigned long flags; - void __iomem *regs; - u32 val; - int id, ev, ret = 0; - - if (!pi || !pi->pl330_data) - return 0; - - regs = pi->base; - pl330 = pi->pl330_data; - - spin_lock_irqsave(&pl330->lock, flags); - - val = readl(regs + FSM) & 0x1; - if (val) - pl330->dmac_tbd.reset_mngr = true; - else - pl330->dmac_tbd.reset_mngr = false; - - val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); - pl330->dmac_tbd.reset_chan |= val; - if (val) { - int i = 0; - while (i < pi->pcfg.num_chan) { - if (val & (1 << i)) { - dev_info(pi->dev, - "Reset Channel-%d\t CS-%x FTC-%x\n", - i, readl(regs + CS(i)), - readl(regs + FTC(i))); - _stop(&pl330->channels[i]); - } - i++; - } - } - - /* Check which event happened i.e, thread notified */ - val = readl(regs + ES); - if (pi->pcfg.num_events < 32 - && val & ~((1 << pi->pcfg.num_events) - 1)) { - pl330->dmac_tbd.reset_dmac = true; - dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); - ret = 1; - goto updt_exit; - } - - for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occurred */ - struct pl330_thread *thrd; - u32 inten = readl(regs + INTEN); - int active; - - /* Clear the event */ - if (inten & (1 << ev)) - writel(1 << ev, regs + INTCLR); - - ret = 1; - - id = pl330->events[ev]; - - thrd = &pl330->channels[id]; - - active = thrd->req_running; - if (active == -1) /* Aborted */ - continue; - - rqdone = &thrd->req[active]; - mark_free(thrd, active); - - /* Get going again ASAP */ - _start(thrd); - - /* For now, just make a list of callbacks to be done */ - list_add_tail(&rqdone->rqd, &pl330->req_done); - } - } - - /* Now that we are in no hurry, do the callbacks */ - while (!list_empty(&pl330->req_done)) { - struct pl330_req *r; - - rqdone = container_of(pl330->req_done.next, - struct _pl330_req, rqd); - - list_del_init(&rqdone->rqd); - - /* Detach the req */ - r = rqdone->r; - rqdone->r = NULL; - - spin_unlock_irqrestore(&pl330->lock, flags); - _callback(r, PL330_ERR_NONE); - spin_lock_irqsave(&pl330->lock, flags); - } - -updt_exit: - spin_unlock_irqrestore(&pl330->lock, flags); - - if (pl330->dmac_tbd.reset_dmac - || pl330->dmac_tbd.reset_mngr - || pl330->dmac_tbd.reset_chan) { - ret = 1; - tasklet_schedule(&pl330->tasks); - } - - return ret; -} -EXPORT_SYMBOL(pl330_update); - -int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - int ret = 0, active; - - if (!thrd || thrd->free || thrd->dmac->state == DYING) - return -EINVAL; - - pl330 = thrd->dmac; - active = thrd->req_running; - - spin_lock_irqsave(&pl330->lock, flags); - - switch (op) { - case PL330_OP_FLUSH: - /* Make sure the channel is stopped */ - _stop(thrd); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - break; - - case PL330_OP_ABORT: - /* Make sure the channel is stopped */ - _stop(thrd); - - /* ABORT is only for the active req */ - if (active == -1) - break; - - thrd->req[active].r = NULL; - mark_free(thrd, active); - - /* Start the next */ - case PL330_OP_START: - if ((active == -1) && !_start(thrd)) - ret = -EIO; - break; - - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - return ret; -} -EXPORT_SYMBOL(pl330_chan_ctrl); - -int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; - void __iomem *regs; - int active; - u32 val; - - if (!pstatus || !thrd || thrd->free) - return -EINVAL; - - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; - - /* The client should remove the DMAC and add again */ - if (pl330->state == DYING) - pstatus->dmac_halted = true; - else - pstatus->dmac_halted = false; - - val = readl(regs + FSC); - if (val & (1 << thrd->id)) - pstatus->faulting = true; - else - pstatus->faulting = false; - - active = thrd->req_running; - - if (active == -1) { - /* Indicate that the thread is not running */ - pstatus->top_req = NULL; - pstatus->wait_req = NULL; - } else { - pstatus->top_req = thrd->req[active].r; - pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) - ? thrd->req[1 - active].r : NULL; - } - - pstatus->src_addr = readl(regs + SA(thrd->id)); - pstatus->dst_addr = readl(regs + DA(thrd->id)); - - return 0; -} -EXPORT_SYMBOL(pl330_chan_status); - -/* Reserve an event */ -static inline int _alloc_event(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - int ev; - - for (ev = 0; ev < pi->pcfg.num_events; ev++) - if (pl330->events[ev] == -1) { - pl330->events[ev] = thrd->id; - return ev; - } - - return -1; -} - -static bool _chan_ns(const struct pl330_info *pi, int i) -{ - return pi->pcfg.irq_ns & (1 << i); -} - -/* Upon success, returns IdentityToken for the - * allocated channel, NULL otherwise. - */ -void *pl330_request_channel(const struct pl330_info *pi) -{ - struct pl330_thread *thrd = NULL; - struct pl330_dmac *pl330; - unsigned long flags; - int chans, i; - - if (!pi || !pi->pl330_data) - return NULL; - - pl330 = pi->pl330_data; - - if (pl330->state == DYING) - return NULL; - - chans = pi->pcfg.num_chan; - - spin_lock_irqsave(&pl330->lock, flags); - - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - if ((thrd->free) && (!_manager_ns(thrd) || - _chan_ns(pi, i))) { - thrd->ev = _alloc_event(thrd); - if (thrd->ev >= 0) { - thrd->free = false; - thrd->lstenq = 1; - thrd->req[0].r = NULL; - mark_free(thrd, 0); - thrd->req[1].r = NULL; - mark_free(thrd, 1); - break; - } - } - thrd = NULL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - - return thrd; -} -EXPORT_SYMBOL(pl330_request_channel); - -/* Release an event */ -static inline void _free_event(struct pl330_thread *thrd, int ev) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - - /* If the event is valid and was held by the thread */ - if (ev >= 0 && ev < pi->pcfg.num_events - && pl330->events[ev] == thrd->id) - pl330->events[ev] = -1; -} - -void pl330_release_channel(void *ch_id) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - - if (!thrd || thrd->free) - return; - - _stop(thrd); - - _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); - _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); - - pl330 = thrd->dmac; - - spin_lock_irqsave(&pl330->lock, flags); - _free_event(thrd, thrd->ev); - thrd->free = true; - spin_unlock_irqrestore(&pl330->lock, flags); -} -EXPORT_SYMBOL(pl330_release_channel); - -/* Initialize the structure for PL330 configuration, that can be used - * by the client driver the make best use of the DMAC - */ -static void read_dmac_config(struct pl330_info *pi) -{ - void __iomem *regs = pi->base; - u32 val; - - val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; - val &= CRD_DATA_WIDTH_MASK; - pi->pcfg.data_bus_width = 8 * (1 << val); - - val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; - val &= CRD_DATA_BUFF_MASK; - pi->pcfg.data_buf_dep = val + 1; - - val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; - val &= CR0_NUM_CHANS_MASK; - val += 1; - pi->pcfg.num_chan = val; - - val = readl(regs + CR0); - if (val & CR0_PERIPH_REQ_SET) { - val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; - val += 1; - pi->pcfg.num_peri = val; - pi->pcfg.peri_ns = readl(regs + CR4); - } else { - pi->pcfg.num_peri = 0; - } - - val = readl(regs + CR0); - if (val & CR0_BOOT_MAN_NS) - pi->pcfg.mode |= DMAC_MODE_NS; - else - pi->pcfg.mode &= ~DMAC_MODE_NS; - - val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; - val &= CR0_NUM_EVENTS_MASK; - val += 1; - pi->pcfg.num_events = val; - - pi->pcfg.irq_ns = readl(regs + CR3); - - pi->pcfg.periph_id = get_id(pi, PERIPH_ID); - pi->pcfg.pcell_id = get_id(pi, PCELL_ID); -} - -static inline void _reset_thread(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - - thrd->req[0].mc_cpu = pl330->mcode_cpu - + (thrd->id * pi->mcbufsz); - thrd->req[0].mc_bus = pl330->mcode_bus - + (thrd->id * pi->mcbufsz); - thrd->req[0].r = NULL; - mark_free(thrd, 0); - - thrd->req[1].mc_cpu = thrd->req[0].mc_cpu - + pi->mcbufsz / 2; - thrd->req[1].mc_bus = thrd->req[0].mc_bus - + pi->mcbufsz / 2; - thrd->req[1].r = NULL; - mark_free(thrd, 1); -} - -static int dmac_alloc_threads(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - struct pl330_thread *thrd; - int i; - - /* Allocate 1 Manager and 'chans' Channel threads */ - pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), - GFP_KERNEL); - if (!pl330->channels) - return -ENOMEM; - - /* Init Channel threads */ - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - thrd->id = i; - thrd->dmac = pl330; - _reset_thread(thrd); - thrd->free = true; - } - - /* MANAGER is indexed at the end */ - thrd = &pl330->channels[chans]; - thrd->id = chans; - thrd->dmac = pl330; - thrd->free = false; - pl330->manager = thrd; - - return 0; -} - -static int dmac_alloc_resources(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - int ret; - - /* - * Alloc MicroCode buffer for 'chans' Channel threads. - * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) - */ - pl330->mcode_cpu = dma_alloc_coherent(pi->dev, - chans * pi->mcbufsz, - &pl330->mcode_bus, GFP_KERNEL); - if (!pl330->mcode_cpu) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - ret = dmac_alloc_threads(pl330); - if (ret) { - dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", - __func__, __LINE__); - dma_free_coherent(pi->dev, - chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); - return ret; - } - - return 0; -} - -int pl330_add(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - void __iomem *regs; - int i, ret; - - if (!pi || !pi->dev) - return -EINVAL; - - /* If already added */ - if (pi->pl330_data) - return -EINVAL; - - /* - * If the SoC can perform reset on the DMAC, then do it - * before reading its configuration. - */ - if (pi->dmac_reset) - pi->dmac_reset(pi); - - regs = pi->base; - - /* Check if we can handle this DMAC */ - if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL - || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { - dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", - get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); - return -EINVAL; - } - - /* Read the configuration of the DMAC */ - read_dmac_config(pi); - - if (pi->pcfg.num_events == 0) { - dev_err(pi->dev, "%s:%d Can't work without events!\n", - __func__, __LINE__); - return -EINVAL; - } - - pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); - if (!pl330) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - /* Assign the info structure and private data */ - pl330->pinfo = pi; - pi->pl330_data = pl330; - - spin_lock_init(&pl330->lock); - - INIT_LIST_HEAD(&pl330->req_done); - - /* Use default MC buffer size if not provided */ - if (!pi->mcbufsz) - pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; - - /* Mark all events as free */ - for (i = 0; i < pi->pcfg.num_events; i++) - pl330->events[i] = -1; - - /* Allocate resources needed by the DMAC */ - ret = dmac_alloc_resources(pl330); - if (ret) { - dev_err(pi->dev, "Unable to create channels for DMAC\n"); - kfree(pl330); - return ret; - } - - tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); - - pl330->state = INIT; - - return 0; -} -EXPORT_SYMBOL(pl330_add); - -static int dmac_free_threads(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - struct pl330_thread *thrd; - int i; - - /* Release Channel threads */ - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - pl330_release_channel((void *)thrd); - } - - /* Free memory */ - kfree(pl330->channels); - - return 0; -} - -static void dmac_free_resources(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - - dmac_free_threads(pl330); - - dma_free_coherent(pi->dev, chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); -} - -void pl330_del(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - - if (!pi || !pi->pl330_data) - return; - - pl330 = pi->pl330_data; - - pl330->state = UNINIT; - - tasklet_kill(&pl330->tasks); - - /* Free DMAC resources */ - dmac_free_resources(pl330); - - kfree(pl330); - pi->pl330_data = NULL; -} -EXPORT_SYMBOL(pl330_del); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 61691cdbdcf2..9173d112ea01 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -16,6 +16,7 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/errno.h> @@ -28,9 +29,8 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/mach-types.h> #include <asm/sizes.h> #include <asm/hardware/sa1111.h> @@ -86,8 +86,10 @@ #define IRQ_S1_CD_VALID (52) #define IRQ_S0_BVD1_STSCHG (53) #define IRQ_S1_BVD1_STSCHG (54) +#define SA1111_IRQ_NR (55) -extern void __init sa1110_mb_enable(void); +extern void sa1110_mb_enable(void); +extern void sa1110_mb_disable(void); /* * We keep the following data for the overall SA1111. Note that the @@ -104,6 +106,7 @@ struct sa1111 { int irq_base; /* base for cascaded on-chip IRQs */ spinlock_t lock; void __iomem *base; + struct sa1111_platform_data *pdata; #ifdef CONFIG_PM void *saved_state; #endif @@ -118,6 +121,7 @@ static struct sa1111 *g_sa1111; struct sa1111_dev_info { unsigned long offset; unsigned long skpcr_mask; + bool dma; unsigned int devid; unsigned int irq[6]; }; @@ -126,6 +130,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_USB, .skpcr_mask = SKPCR_UCLKEN, + .dma = true, .devid = SA1111_DEVID_USB, .irq = { IRQ_USBPWR, @@ -139,6 +144,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = 0x0600, .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, + .dma = true, .devid = SA1111_DEVID_SAC, .irq = { AUDXMTDMADONEA, @@ -155,7 +161,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_KBD, .skpcr_mask = SKPCR_PTCLKEN, - .devid = SA1111_DEVID_PS2, + .devid = SA1111_DEVID_PS2_KBD, .irq = { IRQ_TPRXINT, IRQ_TPTXINT @@ -164,7 +170,7 @@ static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_MSE, .skpcr_mask = SKPCR_PMCLKEN, - .devid = SA1111_DEVID_PS2, + .devid = SA1111_DEVID_PS2_MSE, .irq = { IRQ_MSRXINT, IRQ_MSTXINT @@ -434,16 +440,28 @@ static struct irq_chip sa1111_high_chip = { .irq_set_wake = sa1111_wake_highirq, }; -static void sa1111_setup_irq(struct sa1111 *sachip) +static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) { void __iomem *irqbase = sachip->base + SA1111_INTC; - unsigned int irq; + unsigned i, irq; + int ret; /* * We're guaranteed that this region hasn't been taken. */ request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); + ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1); + if (ret <= 0) { + dev_err(sachip->dev, "unable to allocate %u irqs: %d\n", + SA1111_IRQ_NR, ret); + if (ret == 0) + ret = -EINVAL; + return ret; + } + + sachip->irq_base = ret; + /* disable all IRQs */ sa1111_writel(0, irqbase + SA1111_INTEN0); sa1111_writel(0, irqbase + SA1111_INTEN1); @@ -463,14 +481,16 @@ static void sa1111_setup_irq(struct sa1111 *sachip) sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0); sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); - for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { + for (i = IRQ_GPAIN0; i <= SSPROR; i++) { + irq = sachip->irq_base + i; irq_set_chip_and_handler(irq, &sa1111_low_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { + for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) { + irq = sachip->irq_base + i; irq_set_chip_and_handler(irq, &sa1111_high_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); @@ -483,6 +503,11 @@ static void sa1111_setup_irq(struct sa1111 *sachip) irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); irq_set_handler_data(sachip->irq, sachip); irq_set_chained_handler(sachip->irq, sa1111_irq_handler); + + dev_info(sachip->dev, "Providing IRQ%u-%u\n", + sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1); + + return 0; } /* @@ -581,41 +606,10 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, } #endif -#ifdef CONFIG_DMABOUNCE -/* - * According to the "Intel StrongARM SA-1111 Microprocessor Companion - * Chip Specification Update" (June 2000), erratum #7, there is a - * significant bug in the SA1111 SDRAM shared memory controller. If - * an access to a region of memory above 1MB relative to the bank base, - * it is important that address bit 10 _NOT_ be asserted. Depending - * on the configuration of the RAM, bit 10 may correspond to one - * of several different (processor-relative) address bits. - * - * This routine only identifies whether or not a given DMA address - * is susceptible to the bug. - * - * This should only get called for sa1111_device types due to the - * way we configure our device dma_masks. - */ -static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) -{ - /* - * Section 4.6 of the "Intel StrongARM SA-1111 Development Module - * User's Guide" mentions that jumpers R51 and R52 control the - * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or - * SDRAM bank 1 on Neponset). The default configuration selects - * Assabet, so any address in bank 1 is necessarily invalid. - */ - return (machine_is_assabet() || machine_is_pfs168()) && - (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); -} -#endif - static void sa1111_dev_release(struct device *_dev) { struct sa1111_dev *dev = SA1111_DEV(_dev); - release_resource(&dev->res); kfree(dev); } @@ -624,67 +618,58 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, struct sa1111_dev_info *info) { struct sa1111_dev *dev; + unsigned i; int ret; dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; - goto out; + goto err_alloc; } + device_initialize(&dev->dev); dev_set_name(&dev->dev, "%4.4lx", info->offset); dev->devid = info->devid; dev->dev.parent = sachip->dev; dev->dev.bus = &sa1111_bus_type; dev->dev.release = sa1111_dev_release; - dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; dev->res.start = sachip->phys + info->offset; dev->res.end = dev->res.start + 511; dev->res.name = dev_name(&dev->dev); dev->res.flags = IORESOURCE_MEM; dev->mapbase = sachip->base + info->offset; dev->skpcr_mask = info->skpcr_mask; - memmove(dev->irq, info->irq, sizeof(dev->irq)); - - ret = request_resource(parent, &dev->res); - if (ret) { - printk("SA1111: failed to allocate resource for %s\n", - dev->res.name); - dev_set_name(&dev->dev, NULL); - kfree(dev); - goto out; - } - - ret = device_register(&dev->dev); - if (ret) { - release_resource(&dev->res); - kfree(dev); - goto out; - } + for (i = 0; i < ARRAY_SIZE(info->irq); i++) + dev->irq[i] = sachip->irq_base + info->irq[i]; -#ifdef CONFIG_DMABOUNCE /* - * If the parent device has a DMA mask associated with it, - * propagate it down to the children. + * If the parent device has a DMA mask associated with it, and + * this child supports DMA, propagate it down to the children. */ - if (sachip->dev->dma_mask) { + if (info->dma && sachip->dev->dma_mask) { dev->dma_mask = *sachip->dev->dma_mask; dev->dev.dma_mask = &dev->dma_mask; + dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; + } - if (dev->dma_mask != 0xffffffffUL) { - ret = dmabounce_register_dev(&dev->dev, 1024, 4096, - sa1111_needs_bounce); - if (ret) { - dev_err(&dev->dev, "SA1111: Failed to register" - " with dmabounce\n"); - device_unregister(&dev->dev); - } - } + ret = request_resource(parent, &dev->res); + if (ret) { + dev_err(sachip->dev, "failed to allocate resource for %s\n", + dev->res.name); + goto err_resource; } -#endif -out: + ret = device_add(&dev->dev); + if (ret) + goto err_add; + return 0; + + err_add: + release_resource(&dev->res); + err_resource: + put_device(&dev->dev); + err_alloc: return ret; } @@ -698,16 +683,21 @@ out: * Returns: * %-ENODEV device not found. * %-EBUSY physical address already marked in-use. + * %-EINVAL no platform data passed * %0 successful. */ static int __devinit __sa1111_probe(struct device *me, struct resource *mem, int irq) { + struct sa1111_platform_data *pd = me->platform_data; struct sa1111 *sachip; unsigned long id; unsigned int has_devs; int i, ret = -ENODEV; + if (!pd) + return -EINVAL; + sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); if (!sachip) return -ENOMEM; @@ -727,6 +717,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sachip->dev = me; dev_set_drvdata(sachip->dev, sachip); + sachip->pdata = pd; sachip->phys = mem->start; sachip->irq = irq; @@ -759,6 +750,16 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) */ sa1111_wake(sachip); + /* + * The interrupt controller must be initialised before any + * other device to ensure that the interrupts are available. + */ + if (sachip->irq != NO_IRQ) { + ret = sa1111_setup_irq(sachip, pd->irq_base); + if (ret) + goto err_unmap; + } + #ifdef CONFIG_ARCH_SA1100 { unsigned int val; @@ -789,24 +790,14 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) } #endif - /* - * The interrupt controller must be initialised before any - * other device to ensure that the interrupts are available. - */ - if (sachip->irq != NO_IRQ) - sa1111_setup_irq(sachip); - g_sa1111 = sachip; has_devs = ~0; - if (machine_is_assabet() || machine_is_jornada720() || - machine_is_badge4()) - has_devs &= ~(1 << 4); - else - has_devs &= ~(1 << 1); + if (pd) + has_devs &= ~pd->disable_devs; for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) - if (has_devs & (1 << i)) + if (sa1111_devices[i].devid & has_devs) sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); return 0; @@ -824,7 +815,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) static int sa1111_remove_one(struct device *dev, void *data) { - device_unregister(dev); + struct sa1111_dev *sadev = SA1111_DEV(dev); + device_del(&sadev->dev); + release_resource(&sadev->res); + put_device(&sadev->dev); return 0; } @@ -846,6 +840,7 @@ static void __sa1111_remove(struct sa1111 *sachip) if (sachip->irq != NO_IRQ) { irq_set_chained_handler(sachip->irq, NULL); irq_set_handler_data(sachip->irq, NULL); + irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); release_mem_region(sachip->phys + SA1111_INTC, 512); } @@ -904,6 +899,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0); save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1); + sa1111_writel(0, sachip->base + SA1111_SKPWM0); + sa1111_writel(0, sachip->base + SA1111_SKPWM1); + base = sachip->base + SA1111_INTC; save->intpol0 = sa1111_readl(base + SA1111_INTPOL0); save->intpol1 = sa1111_readl(base + SA1111_INTPOL1); @@ -919,13 +917,15 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) */ val = sa1111_readl(sachip->base + SA1111_SKCR); sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); - sa1111_writel(0, sachip->base + SA1111_SKPWM0); - sa1111_writel(0, sachip->base + SA1111_SKPWM1); clk_disable(sachip->clk); spin_unlock_irqrestore(&sachip->lock, flags); +#ifdef CONFIG_ARCH_SA1100 + sa1110_mb_disable(); +#endif + return 0; } @@ -966,6 +966,11 @@ static int sa1111_resume(struct platform_device *dev) */ sa1111_wake(sachip); +#ifdef CONFIG_ARCH_SA1100 + /* Enable the memory bus request/grant signals */ + sa1110_mb_enable(); +#endif + /* * Only lock for write ops. Also, sa1111_wake must be called with * released spinlock! @@ -1053,6 +1058,7 @@ static struct platform_driver sa1111_device_driver = { .resume = sa1111_resume, .driver = { .name = "sa1111", + .owner = THIS_MODULE, }, }; @@ -1238,16 +1244,23 @@ EXPORT_SYMBOL(sa1111_set_sleep_io); * sa1111_enable_device - enable an on-chip SA1111 function block * @sadev: SA1111 function block device to enable */ -void sa1111_enable_device(struct sa1111_dev *sadev) +int sa1111_enable_device(struct sa1111_dev *sadev) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; + int ret = 0; - spin_lock_irqsave(&sachip->lock, flags); - val = sa1111_readl(sachip->base + SA1111_SKPCR); - sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); - spin_unlock_irqrestore(&sachip->lock, flags); + if (sachip->pdata && sachip->pdata->enable) + ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid); + + if (ret == 0) { + spin_lock_irqsave(&sachip->lock, flags); + val = sa1111_readl(sachip->base + SA1111_SKPCR); + sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); + spin_unlock_irqrestore(&sachip->lock, flags); + } + return ret; } EXPORT_SYMBOL(sa1111_enable_device); @@ -1265,6 +1278,9 @@ void sa1111_disable_device(struct sa1111_dev *sadev) val = sa1111_readl(sachip->base + SA1111_SKPCR); sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); + + if (sachip->pdata && sachip->pdata->disable) + sachip->pdata->disable(sachip->pdata->data, sadev->devid); } EXPORT_SYMBOL(sa1111_disable_device); @@ -1279,7 +1295,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) struct sa1111_dev *dev = SA1111_DEV(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); - return dev->devid == drv->devid; + return dev->devid & drv->devid; } static int sa1111_bus_suspend(struct device *dev, pm_message_t state) @@ -1304,6 +1320,14 @@ static int sa1111_bus_resume(struct device *dev) return ret; } +static void sa1111_bus_shutdown(struct device *dev) +{ + struct sa1111_driver *drv = SA1111_DRV(dev->driver); + + if (drv && drv->shutdown) + drv->shutdown(SA1111_DEV(dev)); +} + static int sa1111_bus_probe(struct device *dev) { struct sa1111_dev *sadev = SA1111_DEV(dev); @@ -1333,6 +1357,7 @@ struct bus_type sa1111_bus_type = { .remove = sa1111_bus_remove, .suspend = sa1111_bus_suspend, .resume = sa1111_bus_resume, + .shutdown = sa1111_bus_shutdown, }; EXPORT_SYMBOL(sa1111_bus_type); @@ -1349,9 +1374,70 @@ void sa1111_driver_unregister(struct sa1111_driver *driver) } EXPORT_SYMBOL(sa1111_driver_unregister); +#ifdef CONFIG_DMABOUNCE +/* + * According to the "Intel StrongARM SA-1111 Microprocessor Companion + * Chip Specification Update" (June 2000), erratum #7, there is a + * significant bug in the SA1111 SDRAM shared memory controller. If + * an access to a region of memory above 1MB relative to the bank base, + * it is important that address bit 10 _NOT_ be asserted. Depending + * on the configuration of the RAM, bit 10 may correspond to one + * of several different (processor-relative) address bits. + * + * This routine only identifies whether or not a given DMA address + * is susceptible to the bug. + * + * This should only get called for sa1111_device types due to the + * way we configure our device dma_masks. + */ +static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) +{ + /* + * Section 4.6 of the "Intel StrongARM SA-1111 Development Module + * User's Guide" mentions that jumpers R51 and R52 control the + * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or + * SDRAM bank 1 on Neponset). The default configuration selects + * Assabet, so any address in bank 1 is necessarily invalid. + */ + return (machine_is_assabet() || machine_is_pfs168()) && + (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); +} + +static int sa1111_notifier_call(struct notifier_block *n, unsigned long action, + void *data) +{ + struct sa1111_dev *dev = SA1111_DEV(data); + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) { + int ret = dmabounce_register_dev(&dev->dev, 1024, 4096, + sa1111_needs_bounce); + if (ret) + dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret); + } + break; + + case BUS_NOTIFY_DEL_DEVICE: + if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) + dmabounce_unregister_dev(&dev->dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block sa1111_bus_notifier = { + .notifier_call = sa1111_notifier_call, +}; +#endif + static int __init sa1111_init(void) { int ret = bus_register(&sa1111_bus_type); +#ifdef CONFIG_DMABOUNCE + if (ret == 0) + bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier); +#endif if (ret == 0) platform_driver_register(&sa1111_device_driver); return ret; @@ -1360,6 +1446,9 @@ static int __init sa1111_init(void) static void __exit sa1111_exit(void) { platform_driver_unregister(&sa1111_device_driver); +#ifdef CONFIG_DMABOUNCE + bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier); +#endif bus_unregister(&sa1111_bus_type); } diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c index 67dd2affc57a..1171a5010aea 100644 --- a/arch/arm/common/via82c505.c +++ b/arch/arm/common/via82c505.c @@ -6,7 +6,6 @@ #include <linux/ioport.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/mach/pci.h> diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 9123568d9a8d..994d331b2319 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y @@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 1103f62a1964..a8314c3ee84d 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -57,18 +57,24 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_E100=y +CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_SERIO_SERPORT is not set CONFIG_SERIAL_AMBA_PL010=y CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_ARMCLCD=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y CONFIG_EXT2_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y @@ -78,5 +84,7 @@ CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_PARTITION_ADVANCED=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d7b6e7b7271..889d73ac1ae1 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y +CONFIG_MACH_UX500_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 23371b17b23e..03fb93621d0d 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -23,6 +23,8 @@ #include <asm/ptrace.h> #include <asm/domain.h> +#define IOMEM(x) (x) + /* * Endian independent macros for shifting bytes within registers. */ diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 86976d034382..68374ba6a943 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -13,7 +13,9 @@ #include <linux/compiler.h> #include <linux/types.h> -#include <asm/system.h> +#include <linux/irqflags.h> +#include <asm/barrier.h> +#include <asm/cmpxchg.h> #define ATOMIC_INIT(i) { (i) } diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h new file mode 100644 index 000000000000..05112380dc53 --- /dev/null +++ b/arch/arm/include/asm/barrier.h @@ -0,0 +1,69 @@ +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +#ifndef __ASSEMBLY__ +#include <asm/outercache.h> + +#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); + +#if __LINUX_ARM_ARCH__ >= 7 || \ + (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) +#define sev() __asm__ __volatile__ ("sev" : : : "memory") +#define wfe() __asm__ __volatile__ ("wfe" : : : "memory") +#define wfi() __asm__ __volatile__ ("wfi" : : : "memory") +#endif + +#if __LINUX_ARM_ARCH__ >= 7 +#define isb() __asm__ __volatile__ ("isb" : : : "memory") +#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") +#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") +#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ + : : "r" (0) : "memory") +#elif defined(CONFIG_CPU_FA526) +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#else +#define isb() __asm__ __volatile__ ("" : : : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#endif + +#ifdef CONFIG_ARCH_HAS_BARRIERS +#include <mach/barriers.h> +#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) +#define mb() do { dsb(); outer_sync(); } while (0) +#define rmb() dsb() +#define wmb() mb() +#else +#include <asm/memory.h> +#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#endif + +#ifndef CONFIG_SMP +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#else +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() +#endif + +#define read_barrier_depends() do { } while(0) +#define smp_read_barrier_depends() do { } while(0) + +#define set_mb(var, value) do { var = value; smp_mb(); } while (0) + +#endif /* !__ASSEMBLY__ */ +#endif /* __ASM_BARRIER_H */ diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index f7419ef9c8f9..e691ec91e4d3 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -24,7 +24,7 @@ #endif #include <linux/compiler.h> -#include <asm/system.h> +#include <linux/irqflags.h> #define smp_mb__before_clear_bit() smp_mb() #define smp_mb__after_clear_bit() smp_mb() diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index fac79dceb736..7af5c6c3653a 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -1,6 +1,7 @@ #ifndef _ASMARM_BUG_H #define _ASMARM_BUG_H +#include <linux/linkage.h> #ifdef CONFIG_BUG @@ -57,4 +58,33 @@ do { \ #include <asm-generic/bug.h> +struct pt_regs; +void die(const char *msg, struct pt_regs *regs, int err); + +struct siginfo; +void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap); + +#ifdef CONFIG_ARM_LPAE +#define FAULT_CODE_ALIGNMENT 33 +#define FAULT_CODE_DEBUG 34 +#else +#define FAULT_CODE_ALIGNMENT 1 +#define FAULT_CODE_DEBUG 2 +#endif + +void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, int code, const char *name); + +void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, int code, const char *name); + +extern asmlinkage void c_backtrace(unsigned long fp, int pmode); + +struct mm_struct; +extern void show_pte(struct mm_struct *mm, unsigned long addr); +extern void __show_regs(struct pt_regs *); + #endif diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h new file mode 100644 index 000000000000..d41d7cbf0ada --- /dev/null +++ b/arch/arm/include/asm/cmpxchg.h @@ -0,0 +1,295 @@ +#ifndef __ASM_ARM_CMPXCHG_H +#define __ASM_ARM_CMPXCHG_H + +#include <linux/irqflags.h> +#include <asm/barrier.h> + +#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) +/* + * On the StrongARM, "swp" is terminally broken since it bypasses the + * cache totally. This means that the cache becomes inconsistent, and, + * since we use normal loads/stores as well, this is really bad. + * Typically, this causes oopsen in filp_close, but could have other, + * more disastrous effects. There are two work-arounds: + * 1. Disable interrupts and emulate the atomic swap + * 2. Clean the cache, perform atomic swap, flush the cache + * + * We choose (1) since its the "easiest" to achieve here and is not + * dependent on the processor type. + * + * NOTE that this solution won't work on an SMP system, so explcitly + * forbid it here. + */ +#define swp_is_buggy +#endif + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) +{ + extern void __bad_xchg(volatile void *, int); + unsigned long ret; +#ifdef swp_is_buggy + unsigned long flags; +#endif +#if __LINUX_ARM_ARCH__ >= 6 + unsigned int tmp; +#endif + + smp_mb(); + + switch (size) { +#if __LINUX_ARM_ARCH__ >= 6 + case 1: + asm volatile("@ __xchg1\n" + "1: ldrexb %0, [%3]\n" + " strexb %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + "1: ldrex %0, [%3]\n" + " strex %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#elif defined(swp_is_buggy) +#ifdef CONFIG_SMP +#error SMP is not supported on this platform +#endif + case 1: + raw_local_irq_save(flags); + ret = *(volatile unsigned char *)ptr; + *(volatile unsigned char *)ptr = x; + raw_local_irq_restore(flags); + break; + + case 4: + raw_local_irq_save(flags); + ret = *(volatile unsigned long *)ptr; + *(volatile unsigned long *)ptr = x; + raw_local_irq_restore(flags); + break; +#else + case 1: + asm volatile("@ __xchg1\n" + " swpb %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + " swp %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#endif + default: + __bad_xchg(ptr, size), ret = 0; + break; + } + smp_mb(); + + return ret; +} + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +#include <asm-generic/cmpxchg-local.h> + +#if __LINUX_ARM_ARCH__ < 6 +/* min ARCH < ARMv6 */ + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include <asm-generic/cmpxchg.h> +#endif + +#else /* min ARCH >= ARMv6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */ + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* min ARCH = ARMv6 */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + +#endif /* __ASM_ARM_CMPXCHG_H */ diff --git a/arch/arm/include/asm/compiler.h b/arch/arm/include/asm/compiler.h new file mode 100644 index 000000000000..8155db2f7fa1 --- /dev/null +++ b/arch/arm/include/asm/compiler.h @@ -0,0 +1,15 @@ +#ifndef __ASM_ARM_COMPILER_H +#define __ASM_ARM_COMPILER_H + +/* + * This is used to ensure the compiler did actually allocate the register we + * asked it for some inline assembly sequences. Apparently we can't trust + * the compiler from one version to another so a bit of paranoia won't hurt. + * This string is meant to be concatenated with the inline asm string and + * will cause compilation to stop on mismatch. + * (for details, see gcc PR 15089) + */ +#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" + + +#endif /* __ASM_ARM_COMPILER_H */ diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h new file mode 100644 index 000000000000..5ef4d8015a60 --- /dev/null +++ b/arch/arm/include/asm/cp15.h @@ -0,0 +1,87 @@ +#ifndef __ASM_ARM_CP15_H +#define __ASM_ARM_CP15_H + +#include <asm/barrier.h> + +/* + * CR1 bits (CP#15 CR1) + */ +#define CR_M (1 << 0) /* MMU enable */ +#define CR_A (1 << 1) /* Alignment abort enable */ +#define CR_C (1 << 2) /* Dcache enable */ +#define CR_W (1 << 3) /* Write buffer enable */ +#define CR_P (1 << 4) /* 32-bit exception handler */ +#define CR_D (1 << 5) /* 32-bit data address range */ +#define CR_L (1 << 6) /* Implementation defined */ +#define CR_B (1 << 7) /* Big endian */ +#define CR_S (1 << 8) /* System MMU protection */ +#define CR_R (1 << 9) /* ROM MMU protection */ +#define CR_F (1 << 10) /* Implementation defined */ +#define CR_Z (1 << 11) /* Implementation defined */ +#define CR_I (1 << 12) /* Icache enable */ +#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ +#define CR_RR (1 << 14) /* Round Robin cache replacement */ +#define CR_L4 (1 << 15) /* LDR pc can set T bit */ +#define CR_DT (1 << 16) +#define CR_IT (1 << 18) +#define CR_ST (1 << 19) +#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ +#define CR_U (1 << 22) /* Unaligned access operation */ +#define CR_XP (1 << 23) /* Extended page tables */ +#define CR_VE (1 << 24) /* Vectored interrupts */ +#define CR_EE (1 << 25) /* Exception (Big) Endian */ +#define CR_TRE (1 << 28) /* TEX remap enable */ +#define CR_AFE (1 << 29) /* Access flag enable */ +#define CR_TE (1 << 30) /* Thumb exception enable */ + +#ifndef __ASSEMBLY__ + +#if __LINUX_ARM_ARCH__ >= 4 +#define vectors_high() (cr_alignment & CR_V) +#else +#define vectors_high() (0) +#endif + +extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ +extern unsigned long cr_alignment; /* defined in entry-armv.S */ + +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); + isb(); +} + +#ifndef CONFIG_SMP +extern void adjust_cr(unsigned long mask, unsigned long set); +#endif + +#define CPACC_FULL(n) (3 << (n * 2)) +#define CPACC_SVC(n) (1 << (n * 2)) +#define CPACC_DISABLE(n) (0 << (n * 2)) + +static inline unsigned int get_copro_access(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" + : "=r" (val) : : "cc"); + return val; +} + +static inline void set_copro_access(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" + : : "r" (val) : "cc"); + isb(); +} + +#endif + +#endif diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h new file mode 100644 index 000000000000..2fca60ab513a --- /dev/null +++ b/arch/arm/include/asm/cpuidle.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ARM_CPUIDLE_H +#define __ASM_ARM_CPUIDLE_H + +#ifdef CONFIG_CPU_IDLE +extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); +#else +static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { return -ENODEV; } +#endif + +/* Common ARM WFI state */ +#define ARM_CPUIDLE_WFI_STATE_PWR(p) {\ + .enter = arm_cpuidle_simple_enter,\ + .exit_latency = 1,\ + .target_residency = 1,\ + .power_usage = p,\ + .flags = CPUIDLE_FLAG_TIME_VALID,\ + .name = "WFI",\ + .desc = "ARM WFI",\ +} + +/* + * in case power_specified == 1, give a default WFI power value needed + * by some governors + */ +#define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) + +#endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index d3f0a9eee9f6..fe92ccf1d0b0 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -1,8 +1,8 @@ #ifndef __ASM_ARM_DIV64 #define __ASM_ARM_DIV64 -#include <asm/system.h> #include <linux/types.h> +#include <asm/compiler.h> /* * The semantics of do_div() are: diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 69a5b0b6455c..5694a0d6576b 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -19,7 +19,6 @@ * It should not be re-used except for that purpose. */ #include <linux/spinlock.h> -#include <asm/system.h> #include <asm/scatterlist.h> #include <mach/isa-dma.h> diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index b5dc173d336f..3d2220498abc 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -10,6 +10,10 @@ #ifndef __ASM_PROC_DOMAIN_H #define __ASM_PROC_DOMAIN_H +#ifndef __ASSEMBLY__ +#include <asm/barrier.h> +#endif + /* * Domain numbers * diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 0e9ce8d9686e..38050b1c4800 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -130,8 +130,4 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk -extern int vectors_user_mapping(void); -#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping() -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES - #endif diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h new file mode 100644 index 000000000000..7c4fbef72b3a --- /dev/null +++ b/arch/arm/include/asm/exec.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARM_EXEC_H +#define __ASM_ARM_EXEC_H + +#define arch_align_stack(x) (x) + +#endif /* __ASM_ARM_EXEC_H */ diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 7df239bcdf27..c4c87bc12231 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -103,11 +103,11 @@ #define L2X0_ADDR_FILTER_EN 1 #ifndef __ASSEMBLY__ -extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask); #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) -extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(u32 aux_val, u32 aux_mask); #else -static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask) +static inline int l2x0_of_init(u32 aux_val, u32 aux_mask) { return -ENODEV; } diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 077c32326c63..2ff2c75a4639 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -231,6 +231,9 @@ extern int iop3xx_get_init_atu(void); #ifndef __ASSEMBLY__ + +#include <linux/types.h> + void iop3xx_map_io(void); void iop_init_cp6_handler(void); void iop_init_time(unsigned long tickrate); diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 59b8c3892f76..122f86d8c991 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -49,7 +49,6 @@ struct iop_adma_device { /** * struct iop_adma_chan - internal representation of an ADMA device * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @lock: serializes enqueue/dequeue operations to the slot pool * @mmr_base: memory mapped register base * @chain: device chain view of the descriptors @@ -62,7 +61,6 @@ struct iop_adma_device { */ struct iop_adma_chan { int pending; - dma_cookie_t completed_cookie; spinlock_t lock; /* protects the descriptor slot pool */ void __iomem *mmr_base; struct list_head chain; diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 43cab498bc27..73f84fa4f366 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -9,6 +9,9 @@ #ifndef __ASM_HARDWARE_IT8152_H #define __ASM_HARDWARE_IT8152_H + +#include <mach/irqs.h> + extern void __iomem *it8152_base_address; #define IT8152_IO_BASE (it8152_base_address + 0x03e00000) diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h deleted file mode 100644 index c1821385abfa..000000000000 --- a/arch/arm/include/asm/hardware/pl330.h +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/include/asm/hardware/pl330.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PL330_CORE_H -#define __PL330_CORE_H - -#define PL330_MAX_CHAN 8 -#define PL330_MAX_IRQS 32 -#define PL330_MAX_PERI 32 - -enum pl330_srccachectrl { - SCCTRL0 = 0, /* Noncacheable and nonbufferable */ - SCCTRL1, /* Bufferable only */ - SCCTRL2, /* Cacheable, but do not allocate */ - SCCTRL3, /* Cacheable and bufferable, but do not allocate */ - SINVALID1, - SINVALID2, - SCCTRL6, /* Cacheable write-through, allocate on reads only */ - SCCTRL7, /* Cacheable write-back, allocate on reads only */ -}; - -enum pl330_dstcachectrl { - DCCTRL0 = 0, /* Noncacheable and nonbufferable */ - DCCTRL1, /* Bufferable only */ - DCCTRL2, /* Cacheable, but do not allocate */ - DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1, /* AWCACHE = 0x1000 */ - DINVALID2, - DCCTRL6, /* Cacheable write-through, allocate on writes only */ - DCCTRL7, /* Cacheable write-back, allocate on writes only */ -}; - -/* Populated by the PL330 core driver for DMA API driver's info */ -struct pl330_config { - u32 periph_id; - u32 pcell_id; -#define DMAC_MODE_NS (1 << 0) - unsigned int mode; - unsigned int data_bus_width:10; /* In number of bits */ - unsigned int data_buf_dep:10; - unsigned int num_chan:4; - unsigned int num_peri:6; - u32 peri_ns; - unsigned int num_events:6; - u32 irq_ns; -}; - -/* Handle to the DMAC provided to the PL330 core */ -struct pl330_info { - /* Owning device */ - struct device *dev; - /* Size of MicroCode buffers for each channel. */ - unsigned mcbufsz; - /* ioremap'ed address of PL330 registers. */ - void __iomem *base; - /* Client can freely use it. */ - void *client_data; - /* PL330 core data, Client must not touch it. */ - void *pl330_data; - /* Populated by the PL330 core driver during pl330_add */ - struct pl330_config pcfg; - /* - * If the DMAC has some reset mechanism, then the - * client may want to provide pointer to the method. - */ - void (*dmac_reset)(struct pl330_info *pi); -}; - -enum pl330_byteswap { - SWAP_NO = 0, - SWAP_2, - SWAP_4, - SWAP_8, - SWAP_16, -}; - -/** - * Request Configuration. - * The PL330 core does not modify this and uses the last - * working configuration if the request doesn't provide any. - * - * The Client may want to provide this info only for the - * first request and a request with new settings. - */ -struct pl330_reqcfg { - /* Address Incrementing */ - unsigned dst_inc:1; - unsigned src_inc:1; - - /* - * For now, the SRC & DST protection levels - * and burst size/length are assumed same. - */ - bool nonsecure; - bool privileged; - bool insnaccess; - unsigned brst_len:5; - unsigned brst_size:3; /* in power of 2 */ - - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - enum pl330_byteswap swap; -}; - -/* - * One cycle of DMAC operation. - * There may be more than one xfer in a request. - */ -struct pl330_xfer { - u32 src_addr; - u32 dst_addr; - /* Size to xfer */ - u32 bytes; - /* - * Pointer to next xfer in the list. - * The last xfer in the req must point to NULL. - */ - struct pl330_xfer *next; -}; - -/* The xfer callbacks are made with one of these arguments. */ -enum pl330_op_err { - /* The all xfers in the request were success. */ - PL330_ERR_NONE, - /* If req aborted due to global error. */ - PL330_ERR_ABORT, - /* If req failed due to problem with Channel. */ - PL330_ERR_FAIL, -}; - -enum pl330_reqtype { - MEMTOMEM, - MEMTODEV, - DEVTOMEM, - DEVTODEV, -}; - -/* A request defining Scatter-Gather List ending with NULL xfer. */ -struct pl330_req { - enum pl330_reqtype rqtype; - /* Index of peripheral for the xfer. */ - unsigned peri:5; - /* Unique token for this xfer, set by the client. */ - void *token; - /* Callback to be called after xfer. */ - void (*xfer_cb)(void *token, enum pl330_op_err err); - /* If NULL, req will be done at last set parameters. */ - struct pl330_reqcfg *cfg; - /* Pointer to first xfer in the request. */ - struct pl330_xfer *x; -}; - -/* - * To know the status of the channel and DMAC, the client - * provides a pointer to this structure. The PL330 core - * fills it with current information. - */ -struct pl330_chanstatus { - /* - * If the DMAC engine halted due to some error, - * the client should remove-add DMAC. - */ - bool dmac_halted; - /* - * If channel is halted due to some error, - * the client should ABORT/FLUSH and START the channel. - */ - bool faulting; - /* Location of last load */ - u32 src_addr; - /* Location of last store */ - u32 dst_addr; - /* - * Pointer to the currently active req, NULL if channel is - * inactive, even though the requests may be present. - */ - struct pl330_req *top_req; - /* Pointer to req waiting second in the queue if any. */ - struct pl330_req *wait_req; -}; - -enum pl330_chan_op { - /* Start the channel */ - PL330_OP_START, - /* Abort the active xfer */ - PL330_OP_ABORT, - /* Stop xfer and flush queue */ - PL330_OP_FLUSH, -}; - -extern int pl330_add(struct pl330_info *); -extern void pl330_del(struct pl330_info *pi); -extern int pl330_update(const struct pl330_info *pi); -extern void pl330_release_channel(void *ch_id); -extern void *pl330_request_channel(const struct pl330_info *pi); -extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); -extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); -extern int pl330_submit_req(void *ch_id, struct pl330_req *r); - -#endif /* __PL330_CORE_H */ diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index 92ed254c175b..7c2bbc7f0be1 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -132,34 +132,10 @@ #define SKPCR_DCLKEN (1<<7) #define SKPCR_PWMCLKEN (1<<8) -/* - * USB Host controller - */ +/* USB Host controller */ #define SA1111_USB 0x0400 /* - * Offsets from SA1111_USB_BASE - */ -#define SA1111_USB_STATUS 0x0118 -#define SA1111_USB_RESET 0x011c -#define SA1111_USB_IRQTEST 0x0120 - -#define USB_RESET_FORCEIFRESET (1 << 0) -#define USB_RESET_FORCEHCRESET (1 << 1) -#define USB_RESET_CLKGENRESET (1 << 2) -#define USB_RESET_SIMSCALEDOWN (1 << 3) -#define USB_RESET_USBINTTEST (1 << 4) -#define USB_RESET_SLEEPSTBYEN (1 << 5) -#define USB_RESET_PWRSENSELOW (1 << 6) -#define USB_RESET_PWRCTRLLOW (1 << 7) - -#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) -#define USB_STATUS_IRQHCIBUFFACC (1 << 8) -#define USB_STATUS_NIRQHCIM (1 << 9) -#define USB_STATUS_NHCIMFCLR (1 << 10) -#define USB_STATUS_USBPWRSENSE (1 << 11) - -/* * Serial Audio Controller * * Registers @@ -327,22 +303,6 @@ * PC_SSR GPIO Block C Sleep State */ -#define _PA_DDR _SA1111( 0x1000 ) -#define _PA_DRR _SA1111( 0x1004 ) -#define _PA_DWR _SA1111( 0x1004 ) -#define _PA_SDR _SA1111( 0x1008 ) -#define _PA_SSR _SA1111( 0x100c ) -#define _PB_DDR _SA1111( 0x1010 ) -#define _PB_DRR _SA1111( 0x1014 ) -#define _PB_DWR _SA1111( 0x1014 ) -#define _PB_SDR _SA1111( 0x1018 ) -#define _PB_SSR _SA1111( 0x101c ) -#define _PC_DDR _SA1111( 0x1020 ) -#define _PC_DRR _SA1111( 0x1024 ) -#define _PC_DWR _SA1111( 0x1024 ) -#define _PC_SDR _SA1111( 0x1028 ) -#define _PC_SSR _SA1111( 0x102c ) - #define SA1111_GPIO 0x1000 #define SA1111_GPIO_PADDR (0x000) @@ -425,106 +385,30 @@ #define SA1111_WAKEPOL0 0x0034 #define SA1111_WAKEPOL1 0x0038 -/* - * PS/2 Trackpad and Mouse Interfaces - * - * Registers - * PS2CR Control Register - * PS2STAT Status Register - * PS2DATA Transmit/Receive Data register - * PS2CLKDIV Clock Division Register - * PS2PRECNT Clock Precount Register - * PS2TEST1 Test register 1 - * PS2TEST2 Test register 2 - * PS2TEST3 Test register 3 - * PS2TEST4 Test register 4 - */ - +/* PS/2 Trackpad and Mouse Interfaces */ #define SA1111_KBD 0x0a00 #define SA1111_MSE 0x0c00 -/* - * These are offsets from the above bases. - */ -#define SA1111_PS2CR 0x0000 -#define SA1111_PS2STAT 0x0004 -#define SA1111_PS2DATA 0x0008 -#define SA1111_PS2CLKDIV 0x000c -#define SA1111_PS2PRECNT 0x0010 - -#define PS2CR_ENA 0x08 -#define PS2CR_FKD 0x02 -#define PS2CR_FKC 0x01 - -#define PS2STAT_STP 0x0100 -#define PS2STAT_TXE 0x0080 -#define PS2STAT_TXB 0x0040 -#define PS2STAT_RXF 0x0020 -#define PS2STAT_RXB 0x0010 -#define PS2STAT_ENA 0x0008 -#define PS2STAT_RXP 0x0004 -#define PS2STAT_KBD 0x0002 -#define PS2STAT_KBC 0x0001 +/* PCMCIA Interface */ +#define SA1111_PCMCIA 0x1600 -/* - * PCMCIA Interface - * - * Registers - * PCSR Status Register - * PCCR Control Register - * PCSSR Sleep State Register - */ - -#define SA1111_PCMCIA 0x1600 - -/* - * These are offsets from the above base. - */ -#define SA1111_PCCR 0x0000 -#define SA1111_PCSSR 0x0004 -#define SA1111_PCSR 0x0008 - -#define PCSR_S0_READY (1<<0) -#define PCSR_S1_READY (1<<1) -#define PCSR_S0_DETECT (1<<2) -#define PCSR_S1_DETECT (1<<3) -#define PCSR_S0_VS1 (1<<4) -#define PCSR_S0_VS2 (1<<5) -#define PCSR_S1_VS1 (1<<6) -#define PCSR_S1_VS2 (1<<7) -#define PCSR_S0_WP (1<<8) -#define PCSR_S1_WP (1<<9) -#define PCSR_S0_BVD1 (1<<10) -#define PCSR_S0_BVD2 (1<<11) -#define PCSR_S1_BVD1 (1<<12) -#define PCSR_S1_BVD2 (1<<13) - -#define PCCR_S0_RST (1<<0) -#define PCCR_S1_RST (1<<1) -#define PCCR_S0_FLT (1<<2) -#define PCCR_S1_FLT (1<<3) -#define PCCR_S0_PWAITEN (1<<4) -#define PCCR_S1_PWAITEN (1<<5) -#define PCCR_S0_PSE (1<<6) -#define PCCR_S1_PSE (1<<7) - -#define PCSSR_S0_SLEEP (1<<0) -#define PCSSR_S1_SLEEP (1<<1) extern struct bus_type sa1111_bus_type; -#define SA1111_DEVID_SBI 0 -#define SA1111_DEVID_SK 1 -#define SA1111_DEVID_USB 2 -#define SA1111_DEVID_SAC 3 -#define SA1111_DEVID_SSP 4 -#define SA1111_DEVID_PS2 5 -#define SA1111_DEVID_GPIO 6 -#define SA1111_DEVID_INT 7 -#define SA1111_DEVID_PCMCIA 8 +#define SA1111_DEVID_SBI (1 << 0) +#define SA1111_DEVID_SK (1 << 1) +#define SA1111_DEVID_USB (1 << 2) +#define SA1111_DEVID_SAC (1 << 3) +#define SA1111_DEVID_SSP (1 << 4) +#define SA1111_DEVID_PS2 (3 << 5) +#define SA1111_DEVID_PS2_KBD (1 << 5) +#define SA1111_DEVID_PS2_MSE (1 << 6) +#define SA1111_DEVID_GPIO (1 << 7) +#define SA1111_DEVID_INT (1 << 8) +#define SA1111_DEVID_PCMCIA (1 << 9) struct sa1111_dev { struct device dev; @@ -548,6 +432,7 @@ struct sa1111_driver { int (*remove)(struct sa1111_dev *); int (*suspend)(struct sa1111_dev *, pm_message_t); int (*resume)(struct sa1111_dev *); + void (*shutdown)(struct sa1111_dev *); }; #define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) @@ -555,9 +440,10 @@ struct sa1111_driver { #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) /* - * These frob the SKPCR register. + * These frob the SKPCR register, and call platform specific + * enable/disable functions. */ -void sa1111_enable_device(struct sa1111_dev *); +int sa1111_enable_device(struct sa1111_dev *); void sa1111_disable_device(struct sa1111_dev *); unsigned int sa1111_pll_clock(struct sa1111_dev *); @@ -580,6 +466,10 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i struct sa1111_platform_data { int irq_base; /* base for cascaded on-chip IRQs */ + unsigned disable_devs; + void *data; + int (*enable)(void *, unsigned); + void (*disable)(void *, unsigned); }; #endif /* _ASM_ARCH_SA1111 */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 9275828feb3d..9af5563dd3eb 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -26,7 +26,6 @@ #include <linux/types.h> #include <asm/byteorder.h> #include <asm/memory.h> -#include <asm/system.h> #include <asm-generic/pci_iomap.h> /* @@ -83,6 +82,11 @@ extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, uns extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int); extern void __iomem *__arm_ioremap_exec(unsigned long, size_t, bool cached); extern void __iounmap(volatile void __iomem *addr); +extern void __arm_iounmap(volatile void __iomem *addr); + +extern void __iomem * (*arch_ioremap_caller)(unsigned long, size_t, + unsigned int, void *); +extern void (*arch_iounmap)(volatile void __iomem *); /* * Bad read/write accesses... @@ -97,8 +101,11 @@ static inline void __iomem *__typesafe_io(unsigned long addr) return (void __iomem *)addr; } +#define IOMEM(x) ((void __force __iomem *)(x)) + /* IO barriers */ #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#include <asm/barrier.h> #define __iormb() rmb() #define __iowmb() wmb() #else @@ -109,7 +116,11 @@ static inline void __iomem *__typesafe_io(unsigned long addr) /* * Now, pick up the machine-defined IO definitions */ +#ifdef CONFIG_NEED_MACH_IO_H #include <mach/io.h> +#else +#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) +#endif /* * This is the limit of PC card/PCI/ISA IO space, which is by default @@ -211,18 +222,18 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * Again, this are defined to perform little endian accesses. See the * IO port primitives for more information. */ -#ifdef __mem_pci -#define readb_relaxed(c) ({ u8 __r = __raw_readb(__mem_pci(c)); __r; }) +#ifndef readl +#define readb_relaxed(c) ({ u8 __r = __raw_readb(c); __r; }) #define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \ - __raw_readw(__mem_pci(c))); __r; }) + __raw_readw(c)); __r; }) #define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \ - __raw_readl(__mem_pci(c))); __r; }) + __raw_readl(c)); __r; }) -#define writeb_relaxed(v,c) ((void)__raw_writeb(v,__mem_pci(c))) +#define writeb_relaxed(v,c) ((void)__raw_writeb(v,c)) #define writew_relaxed(v,c) ((void)__raw_writew((__force u16) \ - cpu_to_le16(v),__mem_pci(c))) + cpu_to_le16(v),c)) #define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ - cpu_to_le32(v),__mem_pci(c))) + cpu_to_le32(v),c)) #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) @@ -232,30 +243,19 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); }) #define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); }) -#define readsb(p,d,l) __raw_readsb(__mem_pci(p),d,l) -#define readsw(p,d,l) __raw_readsw(__mem_pci(p),d,l) -#define readsl(p,d,l) __raw_readsl(__mem_pci(p),d,l) - -#define writesb(p,d,l) __raw_writesb(__mem_pci(p),d,l) -#define writesw(p,d,l) __raw_writesw(__mem_pci(p),d,l) -#define writesl(p,d,l) __raw_writesl(__mem_pci(p),d,l) +#define readsb(p,d,l) __raw_readsb(p,d,l) +#define readsw(p,d,l) __raw_readsw(p,d,l) +#define readsl(p,d,l) __raw_readsl(p,d,l) -#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) +#define writesb(p,d,l) __raw_writesb(p,d,l) +#define writesw(p,d,l) __raw_writesw(p,d,l) +#define writesl(p,d,l) __raw_writesl(p,d,l) -#elif !defined(readb) +#define memset_io(c,v,l) _memset_io(c,(v),(l)) +#define memcpy_fromio(a,c,l) _memcpy_fromio((a),c,(l)) +#define memcpy_toio(c,a,l) _memcpy_toio(c,(a),(l)) -#define readb(c) (__readwrite_bug("readb"),0) -#define readw(c) (__readwrite_bug("readw"),0) -#define readl(c) (__readwrite_bug("readl"),0) -#define writeb(v,c) __readwrite_bug("writeb") -#define writew(v,c) __readwrite_bug("writew") -#define writel(v,c) __readwrite_bug("writel") - -#define check_signature(io,sig,len) (0) - -#endif /* __mem_pci */ +#endif /* readl */ /* * ioremap and friends. @@ -264,16 +264,11 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * Documentation/io-mapping.txt. * */ -#ifndef __arch_ioremap -#define __arch_ioremap __arm_ioremap -#define __arch_iounmap __iounmap -#endif - -#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) -#define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC) -#define iounmap __arch_iounmap +#define ioremap(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE) +#define ioremap_nocache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE) +#define ioremap_cached(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_CACHED) +#define ioremap_wc(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_WC) +#define iounmap __arm_iounmap /* * io{read,write}{8,16,32} macros diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 5a526afb5f18..35c21c375d81 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -1,14 +1,18 @@ #ifndef __ASM_ARM_IRQ_H #define __ASM_ARM_IRQ_H +#define NR_IRQS_LEGACY 16 + +#ifndef CONFIG_SPARSE_IRQ #include <mach/irqs.h> +#else +#define NR_IRQS NR_IRQS_LEGACY +#endif #ifndef irq_canonicalize #define irq_canonicalize(i) (i) #endif -#define NR_IRQS_LEGACY 16 - /* * Use this value to indicate lack of interrupt * capability diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h new file mode 100644 index 000000000000..5c5ca2ea62b0 --- /dev/null +++ b/arch/arm/include/asm/jump_label.h @@ -0,0 +1,41 @@ +#ifndef _ASM_ARM_JUMP_LABEL_H +#define _ASM_ARM_JUMP_LABEL_H + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <asm/system.h> + +#define JUMP_LABEL_NOP_SIZE 4 + +#ifdef CONFIG_THUMB2_KERNEL +#define JUMP_LABEL_NOP "nop.w" +#else +#define JUMP_LABEL_NOP "nop" +#endif + +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("1:\n\t" + JUMP_LABEL_NOP "\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + ".word 1b, %l[l_yes], %c0\n\t" + ".popsection\n\t" + : : "i" (key) : : l_yes); + + return false; +l_yes: + return true; +} + +#endif /* __KERNEL__ */ + +typedef u32 jump_label_t; + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; +}; + +#endif diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h index 6b884d2b0b69..e8567bb99dfc 100644 --- a/arch/arm/include/asm/mc146818rtc.h +++ b/arch/arm/include/asm/mc146818rtc.h @@ -5,7 +5,9 @@ #define _ASM_MC146818RTC_H #include <linux/io.h> -#include <mach/irqs.h> +#include <linux/kernel.h> + +#define RTC_IRQ BUILD_BUG_ON(1) #ifndef RTC_PORT #define RTC_PORT(x) (0x70 + (x)) diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index a8997d71084e..fcb575747e5e 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -116,6 +116,8 @@ #define MODULES_END (END_MEM) #define MODULES_VADDR (PHYS_OFFSET) +#define XIP_VIRT_ADDR(physaddr) (physaddr) + #endif /* !CONFIG_MMU */ /* diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 14965658a923..b8e580a297e4 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -34,4 +34,11 @@ typedef struct { #endif +/* + * switch_mm() may do a full cache flush over the context switch, + * so enable interrupts over the context switch to avoid high + * latency. + */ +#define __ARCH_WANT_INTERRUPTS_ON_CTXSW + #endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 71605d9f8e42..a0b3cac0547c 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -18,6 +18,7 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/proc-fns.h> +#include <asm-generic/mm_hooks.h> void __check_kvm_seq(struct mm_struct *mm); @@ -133,32 +134,4 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, #define deactivate_mm(tsk,mm) do { } while (0) #define activate_mm(prev,next) switch_mm(prev, next, NULL) -/* - * We are inserting a "fake" vma for the user-accessible vector page so - * gdb and friends can get to it through ptrace and /proc/<pid>/mem. - * But we also want to remove it before the generic code gets to see it - * during process exit or the unmapping of it would cause total havoc. - * (the macro is used as remove_vma() is static to mm/mmap.c) - */ -#define arch_exit_mmap(mm) \ -do { \ - struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \ - if (high_vma) { \ - BUG_ON(high_vma->vm_next); /* it should be last */ \ - if (high_vma->vm_prev) \ - high_vma->vm_prev->vm_next = NULL; \ - else \ - mm->mmap = NULL; \ - rb_erase(&high_vma->vm_rb, &mm->mm_rb); \ - mm->mmap_cache = NULL; \ - mm->map_count--; \ - remove_vma(high_vma); \ - } \ -} while (0) - -static inline void arch_dup_mmap(struct mm_struct *oldmm, - struct mm_struct *mm) -{ -} - #endif diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index c0efdd60966f..19c48deda70f 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -17,4 +17,63 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #define ARM_OPCODE_CONDTEST_PASS 1 #define ARM_OPCODE_CONDTEST_UNCOND 2 + +/* + * Opcode byteswap helpers + * + * These macros help with converting instructions between a canonical integer + * format and in-memory representation, in an endianness-agnostic manner. + * + * __mem_to_opcode_*() convert from in-memory representation to canonical form. + * __opcode_to_mem_*() convert from canonical form to in-memory representation. + * + * + * Canonical instruction representation: + * + * ARM: 0xKKLLMMNN + * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8 + * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8 + * + * There is no way to distinguish an ARM instruction in canonical representation + * from a Thumb instruction (just as these cannot be distinguished in memory). + * Where this distinction is important, it needs to be tracked separately. + * + * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not + * represent any valid Thumb-2 instruction. For this range, + * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false. + */ + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/swab.h> + +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define __opcode_to_mem_arm(x) swab32(x) +#define __opcode_to_mem_thumb16(x) swab16(x) +#define __opcode_to_mem_thumb32(x) swahb32(x) +#else +#define __opcode_to_mem_arm(x) ((u32)(x)) +#define __opcode_to_mem_thumb16(x) ((u16)(x)) +#define __opcode_to_mem_thumb32(x) swahw32(x) +#endif + +#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x) +#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x) +#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x) + +/* Operations specific to Thumb opcodes */ + +/* Instruction size checks: */ +#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL) +#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL) + +/* Operations to construct or split 32-bit Thumb instructions: */ +#define __opcode_thumb32_first(x) ((u16)((x) >> 16)) +#define __opcode_thumb32_second(x) ((u16)(x)) +#define __opcode_thumb32_compose(first, second) \ + (((u32)(u16)(first) << 16) | (u32)(u16)(second)) + +#endif /* __ASSEMBLY__ */ + #endif /* __ASM_ARM_OPCODES_H */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 97b440c25c58..5838361c48b3 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -151,6 +151,8 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); +#define __HAVE_ARCH_GATE_AREA 1 + #ifdef CONFIG_ARM_LPAE #include <asm/pgtable-3level-types.h> #else diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 7523340afb8a..00cbe10a50e3 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -22,6 +22,7 @@ enum arm_perf_pmu_ids { ARM_PERF_PMU_ID_CA9, ARM_PERF_PMU_ID_CA5, ARM_PERF_PMU_ID_CA15, + ARM_PERF_PMU_ID_CA7, ARM_NUM_PMU_IDS, }; diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h index 2446d23bfdbf..efdf99045d87 100644 --- a/arch/arm/include/asm/posix_types.h +++ b/arch/arm/include/asm/posix_types.h @@ -19,59 +19,22 @@ * assume GCC is being used. */ -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; +#define __kernel_nlink_t __kernel_nlink_t + typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; +#define __kernel_uid_t __kernel_uid_t -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(fd, fdsetp) \ - (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31))) - -#undef __FD_CLR -#define __FD_CLR(fd, fdsetp) \ - (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31))) - -#undef __FD_ISSET -#define __FD_ISSET(fd, fdsetp) \ - ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) \ - (memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp)))) - -#endif +#include <asm-generic/posix_types.h> #endif diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index cb8d638924fd..5ac8d3d3e025 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,7 +22,6 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> -#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ @@ -56,7 +55,6 @@ struct thread_struct { #define start_thread(regs,pc,sp) \ ({ \ unsigned long *stack = (unsigned long *)sp; \ - set_fs(USER_DS); \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ @@ -90,6 +88,8 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() #endif +void cpu_idle_wait(void); + /* * Create a new kernel thread */ diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index ee0363307918..aeae9c609df4 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -13,8 +13,6 @@ #ifdef CONFIG_OF -#include <asm/irq.h> - extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h new file mode 100644 index 000000000000..fa09e6b49bf1 --- /dev/null +++ b/arch/arm/include/asm/switch_to.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARM_SWITCH_TO_H +#define __ASM_ARM_SWITCH_TO_H + +#include <linux/thread_info.h> + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. schedule() itself + * contains the memory barrier to tell GCC not to cache `current'. + */ +extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); + +#define switch_to(prev,next,last) \ +do { \ + last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ +} while (0) + +#endif /* __ASM_ARM_SWITCH_TO_H */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 424aa458c487..74542c52f9be 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -1,544 +1,8 @@ -#ifndef __ASM_ARM_SYSTEM_H -#define __ASM_ARM_SYSTEM_H - -#ifdef __KERNEL__ - -#define CPU_ARCH_UNKNOWN 0 -#define CPU_ARCH_ARMv3 1 -#define CPU_ARCH_ARMv4 2 -#define CPU_ARCH_ARMv4T 3 -#define CPU_ARCH_ARMv5 4 -#define CPU_ARCH_ARMv5T 5 -#define CPU_ARCH_ARMv5TE 6 -#define CPU_ARCH_ARMv5TEJ 7 -#define CPU_ARCH_ARMv6 8 -#define CPU_ARCH_ARMv7 9 - -/* - * CR1 bits (CP#15 CR1) - */ -#define CR_M (1 << 0) /* MMU enable */ -#define CR_A (1 << 1) /* Alignment abort enable */ -#define CR_C (1 << 2) /* Dcache enable */ -#define CR_W (1 << 3) /* Write buffer enable */ -#define CR_P (1 << 4) /* 32-bit exception handler */ -#define CR_D (1 << 5) /* 32-bit data address range */ -#define CR_L (1 << 6) /* Implementation defined */ -#define CR_B (1 << 7) /* Big endian */ -#define CR_S (1 << 8) /* System MMU protection */ -#define CR_R (1 << 9) /* ROM MMU protection */ -#define CR_F (1 << 10) /* Implementation defined */ -#define CR_Z (1 << 11) /* Implementation defined */ -#define CR_I (1 << 12) /* Icache enable */ -#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ -#define CR_RR (1 << 14) /* Round Robin cache replacement */ -#define CR_L4 (1 << 15) /* LDR pc can set T bit */ -#define CR_DT (1 << 16) -#define CR_IT (1 << 18) -#define CR_ST (1 << 19) -#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ -#define CR_U (1 << 22) /* Unaligned access operation */ -#define CR_XP (1 << 23) /* Extended page tables */ -#define CR_VE (1 << 24) /* Vectored interrupts */ -#define CR_EE (1 << 25) /* Exception (Big) Endian */ -#define CR_TRE (1 << 28) /* TEX remap enable */ -#define CR_AFE (1 << 29) /* Access flag enable */ -#define CR_TE (1 << 30) /* Thumb exception enable */ - -/* - * This is used to ensure the compiler did actually allocate the register we - * asked it for some inline assembly sequences. Apparently we can't trust - * the compiler from one version to another so a bit of paranoia won't hurt. - * This string is meant to be concatenated with the inline asm string and - * will cause compilation to stop on mismatch. - * (for details, see gcc PR 15089) - */ -#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" - -#ifndef __ASSEMBLY__ - -#include <linux/compiler.h> -#include <linux/linkage.h> -#include <linux/irqflags.h> - -#include <asm/outercache.h> - -struct thread_info; -struct task_struct; - -/* information about the system we're running on */ -extern unsigned int system_rev; -extern unsigned int system_serial_low; -extern unsigned int system_serial_high; -extern unsigned int mem_fclk_21285; - -struct pt_regs; - -void die(const char *msg, struct pt_regs *regs, int err); - -struct siginfo; -void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, - unsigned long err, unsigned long trap); - -#ifdef CONFIG_ARM_LPAE -#define FAULT_CODE_ALIGNMENT 33 -#define FAULT_CODE_DEBUG 34 -#else -#define FAULT_CODE_ALIGNMENT 1 -#define FAULT_CODE_DEBUG 2 -#endif - -void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, - struct pt_regs *), - int sig, int code, const char *name); - -void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, - struct pt_regs *), - int sig, int code, const char *name); - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -extern asmlinkage void c_backtrace(unsigned long fp, int pmode); - -struct mm_struct; -extern void show_pte(struct mm_struct *mm, unsigned long addr); -extern void __show_regs(struct pt_regs *); - -extern int __pure cpu_architecture(void); -extern void cpu_init(void); - -void soft_restart(unsigned long); -extern void (*arm_pm_restart)(char str, const char *cmd); -extern void (*arm_pm_idle)(void); - -#define UDBG_UNDEFINED (1 << 0) -#define UDBG_SYSCALL (1 << 1) -#define UDBG_BADABORT (1 << 2) -#define UDBG_SEGV (1 << 3) -#define UDBG_BUS (1 << 4) - -extern unsigned int user_debug; - -#if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) -#else -#define vectors_high() (0) -#endif - -#if __LINUX_ARM_ARCH__ >= 7 || \ - (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) -#define sev() __asm__ __volatile__ ("sev" : : : "memory") -#define wfe() __asm__ __volatile__ ("wfe" : : : "memory") -#define wfi() __asm__ __volatile__ ("wfi" : : : "memory") -#endif - -#if __LINUX_ARM_ARCH__ >= 7 -#define isb() __asm__ __volatile__ ("isb" : : : "memory") -#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") -#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") -#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ - : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ - : : "r" (0) : "memory") -#elif defined(CONFIG_CPU_FA526) -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ - : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") -#else -#define isb() __asm__ __volatile__ ("" : : : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") -#endif - -#ifdef CONFIG_ARCH_HAS_BARRIERS -#include <mach/barriers.h> -#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) -#define mb() do { dsb(); outer_sync(); } while (0) -#define rmb() dsb() -#define wmb() mb() -#else -#include <asm/memory.h> -#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#endif - -#ifndef CONFIG_SMP -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#else -#define smp_mb() dmb() -#define smp_rmb() dmb() -#define smp_wmb() dmb() -#endif - -#define read_barrier_depends() do { } while(0) -#define smp_read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) -#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); - -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ -extern unsigned long cr_alignment; /* defined in entry-armv.S */ - -static inline unsigned int get_cr(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_cr(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" - : : "r" (val) : "cc"); - isb(); -} - -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - -#define CPACC_FULL(n) (3 << (n * 2)) -#define CPACC_SVC(n) (1 << (n * 2)) -#define CPACC_DISABLE(n) (0 << (n * 2)) - -static inline unsigned int get_copro_access(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" - : "=r" (val) : : "cc"); - return val; -} - -static inline void set_copro_access(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" - : : "r" (val) : "cc"); - isb(); -} - -/* - * switch_mm() may do a full cache flush over the context switch, - * so enable interrupts over the context switch to avoid high - * latency. - */ -#define __ARCH_WANT_INTERRUPTS_ON_CTXSW - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. schedule() itself - * contains the memory barrier to tell GCC not to cache `current'. - */ -extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); - -#define switch_to(prev,next,last) \ -do { \ - last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ -} while (0) - -#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) -/* - * On the StrongARM, "swp" is terminally broken since it bypasses the - * cache totally. This means that the cache becomes inconsistent, and, - * since we use normal loads/stores as well, this is really bad. - * Typically, this causes oopsen in filp_close, but could have other, - * more disastrous effects. There are two work-arounds: - * 1. Disable interrupts and emulate the atomic swap - * 2. Clean the cache, perform atomic swap, flush the cache - * - * We choose (1) since its the "easiest" to achieve here and is not - * dependent on the processor type. - * - * NOTE that this solution won't work on an SMP system, so explcitly - * forbid it here. - */ -#define swp_is_buggy -#endif - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) -{ - extern void __bad_xchg(volatile void *, int); - unsigned long ret; -#ifdef swp_is_buggy - unsigned long flags; -#endif -#if __LINUX_ARM_ARCH__ >= 6 - unsigned int tmp; -#endif - - smp_mb(); - - switch (size) { -#if __LINUX_ARM_ARCH__ >= 6 - case 1: - asm volatile("@ __xchg1\n" - "1: ldrexb %0, [%3]\n" - " strexb %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - "1: ldrex %0, [%3]\n" - " strex %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#elif defined(swp_is_buggy) -#ifdef CONFIG_SMP -#error SMP is not supported on this platform -#endif - case 1: - raw_local_irq_save(flags); - ret = *(volatile unsigned char *)ptr; - *(volatile unsigned char *)ptr = x; - raw_local_irq_restore(flags); - break; - - case 4: - raw_local_irq_save(flags); - ret = *(volatile unsigned long *)ptr; - *(volatile unsigned long *)ptr = x; - raw_local_irq_restore(flags); - break; -#else - case 1: - asm volatile("@ __xchg1\n" - " swpb %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - " swp %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#endif - default: - __bad_xchg(ptr, size), ret = 0; - break; - } - smp_mb(); - - return ret; -} - -extern void disable_hlt(void); -extern void enable_hlt(void); - -void cpu_idle_wait(void); - -#include <asm-generic/cmpxchg-local.h> - -#if __LINUX_ARM_ARCH__ < 6 -/* min ARCH < ARMv6 */ - -#ifdef CONFIG_SMP -#error "SMP is not supported on this platform" -#endif - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include <asm-generic/cmpxchg.h> -#endif - -#else /* min ARCH >= ARMv6 */ - -extern void __bad_cmpxchg(volatile void *ptr, int size); - -/* - * cmpxchg only support 32-bits operands on ARMv6. - */ - -static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, - unsigned long new, int size) -{ - unsigned long oldval, res; - - switch (size) { -#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ - case 1: - do { - asm volatile("@ __cmpxchg1\n" - " ldrexb %1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " strexbeq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (old), "r" (new) - : "memory", "cc"); - } while (res); - break; - case 2: - do { - asm volatile("@ __cmpxchg1\n" - " ldrexh %1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " strexheq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (old), "r" (new) - : "memory", "cc"); - } while (res); - break; -#endif - case 4: - do { - asm volatile("@ __cmpxchg4\n" - " ldrex %1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " strexeq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (old), "r" (new) - : "memory", "cc"); - } while (res); - break; - default: - __bad_cmpxchg(ptr, size); - oldval = 0; - } - - return oldval; -} - -static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, - unsigned long new, int size) -{ - unsigned long ret; - - smp_mb(); - ret = __cmpxchg(ptr, old, new, size); - smp_mb(); - - return ret; -} - -#define cmpxchg(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ - (unsigned long)(o), \ - (unsigned long)(n), \ - sizeof(*(ptr)))) - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - unsigned long ret; - - switch (size) { -#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */ - case 1: - case 2: - ret = __cmpxchg_local_generic(ptr, old, new, size); - break; -#endif - default: - ret = __cmpxchg(ptr, old, new, size); - } - - return ret; -} - -#define cmpxchg_local(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ - (unsigned long)(o), \ - (unsigned long)(n), \ - sizeof(*(ptr)))) - -#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ - -/* - * Note : ARMv7-M (currently unsupported by Linux) does not support - * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should - * not be allowed to use __cmpxchg64. - */ -static inline unsigned long long __cmpxchg64(volatile void *ptr, - unsigned long long old, - unsigned long long new) -{ - register unsigned long long oldval asm("r0"); - register unsigned long long __old asm("r2") = old; - register unsigned long long __new asm("r4") = new; - unsigned long res; - - do { - asm volatile( - " @ __cmpxchg8\n" - " ldrexd %1, %H1, [%2]\n" - " mov %0, #0\n" - " teq %1, %3\n" - " teqeq %H1, %H3\n" - " strexdeq %0, %4, %H4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (ptr), "Ir" (__old), "r" (__new) - : "memory", "cc"); - } while (res); - - return oldval; -} - -static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, - unsigned long long old, - unsigned long long new) -{ - unsigned long long ret; - - smp_mb(); - ret = __cmpxchg64(ptr, old, new); - smp_mb(); - - return ret; -} - -#define cmpxchg64(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n))) - -#define cmpxchg64_local(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n))) - -#else /* min ARCH = ARMv6 */ - -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#endif - -#endif /* __LINUX_ARM_ARCH__ >= 6 */ - -#endif /* __ASSEMBLY__ */ - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif +/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */ +#include <asm/barrier.h> +#include <asm/compiler.h> +#include <asm/cmpxchg.h> +#include <asm/exec.h> +#include <asm/switch_to.h> +#include <asm/system_info.h> +#include <asm/system_misc.h> diff --git a/arch/arm/include/asm/system_info.h b/arch/arm/include/asm/system_info.h new file mode 100644 index 000000000000..dfd386d0c022 --- /dev/null +++ b/arch/arm/include/asm/system_info.h @@ -0,0 +1,27 @@ +#ifndef __ASM_ARM_SYSTEM_INFO_H +#define __ASM_ARM_SYSTEM_INFO_H + +#define CPU_ARCH_UNKNOWN 0 +#define CPU_ARCH_ARMv3 1 +#define CPU_ARCH_ARMv4 2 +#define CPU_ARCH_ARMv4T 3 +#define CPU_ARCH_ARMv5 4 +#define CPU_ARCH_ARMv5T 5 +#define CPU_ARCH_ARMv5TE 6 +#define CPU_ARCH_ARMv5TEJ 7 +#define CPU_ARCH_ARMv6 8 +#define CPU_ARCH_ARMv7 9 + +#ifndef __ASSEMBLY__ + +/* information about the system we're running on */ +extern unsigned int system_rev; +extern unsigned int system_serial_low; +extern unsigned int system_serial_high; +extern unsigned int mem_fclk_21285; + +extern int __pure cpu_architecture(void); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_ARM_SYSTEM_INFO_H */ diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h new file mode 100644 index 000000000000..5a85f148b607 --- /dev/null +++ b/arch/arm/include/asm/system_misc.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ARM_SYSTEM_MISC_H +#define __ASM_ARM_SYSTEM_MISC_H + +#ifndef __ASSEMBLY__ + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/irqflags.h> + +extern void cpu_init(void); + +void soft_restart(unsigned long); +extern void (*arm_pm_restart)(char str, const char *cmd); +extern void (*arm_pm_idle)(void); + +#define UDBG_UNDEFINED (1 << 0) +#define UDBG_SYSCALL (1 << 1) +#define UDBG_BADABORT (1 << 2) +#define UDBG_SEGV (1 << 3) +#define UDBG_BUS (1 << 4) + +extern unsigned int user_debug; + +extern void disable_hlt(void); +extern void enable_hlt(void); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 02b2f8203982..85fe61e73202 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -318,6 +318,21 @@ extern struct cpu_tlb_fns cpu_tlb; #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) +#define __tlb_op(f, insnarg, arg) \ + do { \ + if (always_tlb_flags & (f)) \ + asm("mcr " insnarg \ + : : "r" (arg) : "cc"); \ + else if (possible_tlb_flags & (f)) \ + asm("tst %1, %2\n\t" \ + "mcrne " insnarg \ + : : "r" (arg), "r" (__tlb_flag), "Ir" (f) \ + : "cc"); \ + } while (0) + +#define tlb_op(f, regs, arg) __tlb_op(f, "p15, 0, %0, " regs, arg) +#define tlb_l2_op(f, regs, arg) __tlb_op(f, "p15, 1, %0, " regs, arg) + static inline void local_flush_tlb_all(void) { const int zero = 0; @@ -326,16 +341,11 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_WB)) dsb(); - if (tlb_flag(TLB_V3_FULL)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL)) - asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL)) - asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V7_UIS_FULL)) - asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc"); + tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); + tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero); + tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero); + tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero); + tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero); if (tlb_flag(TLB_BARRIER)) { dsb(); @@ -352,29 +362,23 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { - if (tlb_flag(TLB_V3_FULL)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_U_FULL)) - asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_D_FULL)) - asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { + if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { + tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); + tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero); + tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero); + tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero); + } + put_cpu(); } - put_cpu(); - - if (tlb_flag(TLB_V6_U_ASID)) - asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_D_ASID)) - asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_I_ASID)) - asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V7_UIS_ASID)) + + tlb_op(TLB_V6_U_ASID, "c8, c7, 2", asid); + tlb_op(TLB_V6_D_ASID, "c8, c6, 2", asid); + tlb_op(TLB_V6_I_ASID, "c8, c5, 2", asid); #ifdef CONFIG_ARM_ERRATA_720789 - asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc"); + tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", zero); #else - asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc"); + tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", asid); #endif if (tlb_flag(TLB_BARRIER)) @@ -392,30 +396,23 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) if (tlb_flag(TLB_WB)) dsb(); - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - if (tlb_flag(TLB_V3_PAGE)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && + cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { + tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr); + tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr); + tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr); + tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr); if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } - if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V7_UIS_PAGE)) + tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", uaddr); + tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", uaddr); + tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", uaddr); #ifdef CONFIG_ARM_ERRATA_720789 - asm("mcr p15, 0, %0, c8, c3, 3" : : "r" (uaddr & PAGE_MASK) : "cc"); + tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 3", uaddr & PAGE_MASK); #else - asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc"); + tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", uaddr); #endif if (tlb_flag(TLB_BARRIER)) @@ -432,25 +429,17 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_WB)) dsb(); - if (tlb_flag(TLB_V3_PAGE)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr); + tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr); + tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr); + tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr); if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V7_UIS_PAGE)) - asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc"); + tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", kaddr); + tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", kaddr); + tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", kaddr); + tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", kaddr); if (tlb_flag(TLB_BARRIER)) { dsb(); @@ -475,13 +464,8 @@ static inline void flush_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_L2CLEAN_FR)) - asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" - : : "r" (pmd) : "cc"); + tlb_op(TLB_DCLEAN, "c7, c10, 1 @ flush_pmd", pmd); + tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1 @ L2 flush_pmd", pmd); if (tlb_flag(TLB_WB)) dsb(); @@ -491,15 +475,11 @@ static inline void clean_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_L2CLEAN_FR)) - asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" - : : "r" (pmd) : "cc"); + tlb_op(TLB_DCLEAN, "c7, c10, 1 @ flush_pmd", pmd); + tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1 @ L2 flush_pmd", pmd); } +#undef tlb_op #undef tlb_flag #undef always_tlb_flags #undef possible_tlb_flags diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index 5b29a6673625..f555bb3664dc 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -46,7 +46,7 @@ static inline int in_exception_text(unsigned long ptr) return in ? : __in_irqentry_text(ptr); } -extern void __init early_trap_init(void); +extern void __init early_trap_init(void *); extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame); extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs); diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 2958976d867b..71f6536d17ac 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -16,8 +16,8 @@ #include <asm/errno.h> #include <asm/memory.h> #include <asm/domain.h> -#include <asm/system.h> #include <asm/unified.h> +#include <asm/compiler.h> #define VERIFY_READ 0 #define VERIFY_WRITE 1 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index f16d7652f34b..7b787d642af4 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -7,6 +7,8 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_insn.o = -pg +CFLAGS_REMOVE_patch.o = -pg endif CFLAGS_REMOVE_return_address.o = -pg @@ -14,30 +16,29 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o return_address.o setup.o signal.o \ - sys_arm.o stacktrace.o time.o traps.o + process.o ptrace.o return_address.o sched_clock.o \ + setup.o signal.o stacktrace.o sys_arm.o time.o traps.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o - +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o -obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o -obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o -obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o -obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o insn.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o insn.o +obj-$(CONFIG_JUMP_LABEL) += jump_label.o insn.o patch.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -obj-$(CONFIG_KPROBES) += kprobes.o kprobes-common.o +obj-$(CONFIG_KPROBES) += kprobes.o kprobes-common.o patch.o ifdef CONFIG_THUMB2_KERNEL obj-$(CONFIG_KPROBES) += kprobes-thumb.o else diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 5b0bce61eb69..b57c75e0b01f 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -18,7 +18,6 @@ #include <linux/io.h> #include <asm/checksum.h> -#include <asm/system.h> #include <asm/ftrace.h> /* diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 632df9a66f8c..ede5f7741c42 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -299,7 +299,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev) */ void pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_sys_data *root = bus->sysdata; struct pci_dev *dev; u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK; diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c new file mode 100644 index 000000000000..89545f6c8403 --- /dev/null +++ b/arch/arm/kernel/cpuidle.c @@ -0,0 +1,21 @@ +/* + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/cpuidle.h> +#include <asm/proc-fns.h> + +int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + cpu_do_idle(); + + return index; +} diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 204e2160cfcc..c45522c36787 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -10,6 +10,7 @@ * 32-bit debugging code */ #include <linux/linkage.h> +#include <asm/assembler.h> .text @@ -100,7 +101,7 @@ #endif /* CONFIG_CPU_V6 */ -#else +#elif !defined(CONFIG_DEBUG_SEMIHOSTING) #include <mach/debug-macro.S> #endif /* CONFIG_DEBUG_ICEDCC */ @@ -155,6 +156,8 @@ hexbuf: .space 16 .ltorg +#ifndef CONFIG_DEBUG_SEMIHOSTING + ENTRY(printascii) addruart_current r3, r1, r2 b 2f @@ -177,3 +180,24 @@ ENTRY(printch) mov r0, #0 b 1b ENDPROC(printch) + +#else + +ENTRY(printascii) + mov r1, r0 + mov r0, #0x04 @ SYS_WRITE0 + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr +ENDPROC(printascii) + +ENTRY(printch) + adr r1, hexbuf + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr +ENDPROC(printch) + +#endif diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index ddba41d1fcf1..d0d1e83150c9 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -3,6 +3,7 @@ #include <linux/personality.h> #include <linux/binfmts.h> #include <linux/elf.h> +#include <asm/system_info.h> int elf_check_arch(const struct elf32_hdr *x) { diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 22f0ed324f37..7fd3ad048da9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -15,6 +15,7 @@ * that causes it to save wrong values... Be aware! */ +#include <asm/assembler.h> #include <asm/memory.h> #include <asm/glue-df.h> #include <asm/glue-pf.h> @@ -26,7 +27,7 @@ #include <asm/unwind.h> #include <asm/unistd.h> #include <asm/tls.h> -#include <asm/system.h> +#include <asm/system_info.h> #include "entry-header.S" #include <asm/entry-macro-multi.S> diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 4c164ece5891..c32f8456aa09 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -42,9 +42,9 @@ #include <linux/seq_file.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/fiq.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/traps.h> static unsigned long no_fiq_insn; diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index c0062ad1e847..df0bf0c8cb79 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -16,10 +16,13 @@ #include <linux/uaccess.h> #include <asm/cacheflush.h> +#include <asm/opcodes.h> #include <asm/ftrace.h> +#include "insn.h" + #ifdef CONFIG_THUMB2_KERNEL -#define NOP 0xeb04f85d /* pop.w {lr} */ +#define NOP 0xf85deb04 /* pop.w {lr} */ #else #define NOP 0xe8bd4000 /* pop {lr} */ #endif @@ -60,76 +63,31 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) } #endif -#ifdef CONFIG_THUMB2_KERNEL -static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, - bool link) -{ - unsigned long s, j1, j2, i1, i2, imm10, imm11; - unsigned long first, second; - long offset; - - offset = (long)addr - (long)(pc + 4); - if (offset < -16777216 || offset > 16777214) { - WARN_ON_ONCE(1); - return 0; - } - - s = (offset >> 24) & 0x1; - i1 = (offset >> 23) & 0x1; - i2 = (offset >> 22) & 0x1; - imm10 = (offset >> 12) & 0x3ff; - imm11 = (offset >> 1) & 0x7ff; - - j1 = (!i1) ^ s; - j2 = (!i2) ^ s; - - first = 0xf000 | (s << 10) | imm10; - second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11; - if (link) - second |= 1 << 14; - - return (second << 16) | first; -} -#else -static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, - bool link) -{ - unsigned long opcode = 0xea000000; - long offset; - - if (link) - opcode |= 1 << 24; - - offset = (long)addr - (long)(pc + 8); - if (unlikely(offset < -33554432 || offset > 33554428)) { - /* Can't generate branches that far (from ARM ARM). Ftrace - * doesn't generate branches outside of kernel text. - */ - WARN_ON_ONCE(1); - return 0; - } - - offset = (offset >> 2) & 0x00ffffff; - - return opcode | offset; -} -#endif - static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { - return ftrace_gen_branch(pc, addr, true); + return arm_gen_branch_link(pc, addr); } static int ftrace_modify_code(unsigned long pc, unsigned long old, - unsigned long new) + unsigned long new, bool validate) { unsigned long replaced; - if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE)) - return -EFAULT; + if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) { + old = __opcode_to_mem_thumb32(old); + new = __opcode_to_mem_thumb32(new); + } else { + old = __opcode_to_mem_arm(old); + new = __opcode_to_mem_arm(new); + } - if (replaced != old) - return -EINVAL; + if (validate) { + if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE)) + return -EFAULT; + + if (replaced != old) + return -EINVAL; + } if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE)) return -EPERM; @@ -141,23 +99,21 @@ static int ftrace_modify_code(unsigned long pc, unsigned long old, int ftrace_update_ftrace_func(ftrace_func_t func) { - unsigned long pc, old; + unsigned long pc; unsigned long new; int ret; pc = (unsigned long)&ftrace_call; - memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(pc, (unsigned long)func); - ret = ftrace_modify_code(pc, old, new); + ret = ftrace_modify_code(pc, 0, new, false); #ifdef CONFIG_OLD_MCOUNT if (!ret) { pc = (unsigned long)&ftrace_call_old; - memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE); new = ftrace_call_replace(pc, (unsigned long)func); - ret = ftrace_modify_code(pc, old, new); + ret = ftrace_modify_code(pc, 0, new, false); } #endif @@ -172,7 +128,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) old = ftrace_nop_replace(rec); new = ftrace_call_replace(ip, adjust_address(rec, addr)); - return ftrace_modify_code(rec->ip, old, new); + return ftrace_modify_code(rec->ip, old, new, true); } int ftrace_make_nop(struct module *mod, @@ -185,7 +141,7 @@ int ftrace_make_nop(struct module *mod, old = ftrace_call_replace(ip, adjust_address(rec, addr)); new = ftrace_nop_replace(rec); - ret = ftrace_modify_code(ip, old, new); + ret = ftrace_modify_code(ip, old, new, true); #ifdef CONFIG_OLD_MCOUNT if (ret == -EINVAL && addr == MCOUNT_ADDR) { @@ -193,7 +149,7 @@ int ftrace_make_nop(struct module *mod, old = ftrace_call_replace(ip, adjust_address(rec, addr)); new = ftrace_nop_replace(rec); - ret = ftrace_modify_code(ip, old, new); + ret = ftrace_modify_code(ip, old, new, true); } #endif @@ -249,12 +205,12 @@ static int __ftrace_modify_caller(unsigned long *callsite, { unsigned long caller_fn = (unsigned long) func; unsigned long pc = (unsigned long) callsite; - unsigned long branch = ftrace_gen_branch(pc, caller_fn, false); + unsigned long branch = arm_gen_branch(pc, caller_fn); unsigned long nop = 0xe1a00000; /* mov r0, r0 */ unsigned long old = enable ? nop : branch; unsigned long new = enable ? branch : nop; - return ftrace_modify_code(pc, old, new); + return ftrace_modify_code(pc, old, new, true); } static int ftrace_modify_graph_caller(bool enable) diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index d46f25968bec..278cfc144f44 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -17,8 +17,8 @@ #include <asm/assembler.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> +#include <asm/cp15.h> #include <asm/thread_info.h> -#include <asm/system.h> /* * Kernel startup entry point. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 6d5791144066..3bf0c7f8b043 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -15,12 +15,12 @@ #include <linux/init.h> #include <asm/assembler.h> +#include <asm/cp15.h> #include <asm/domain.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> #include <asm/memory.h> #include <asm/thread_info.h> -#include <asm/system.h> #include <asm/pgtable.h> #ifdef CONFIG_DEBUG_LL @@ -265,7 +265,7 @@ __create_page_tables: str r6, [r3] #ifdef CONFIG_DEBUG_LL -#ifndef CONFIG_DEBUG_ICEDCC +#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING) /* * Map in IO space for serial debugging. * This allows debug messages to be output @@ -297,10 +297,10 @@ __create_page_tables: cmp r0, r6 blo 1b -#else /* CONFIG_DEBUG_ICEDCC */ - /* we don't need any serial debugging mappings for ICEDCC */ +#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */ + /* we don't need any serial debugging mappings */ ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags -#endif /* !CONFIG_DEBUG_ICEDCC */ +#endif #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) /* diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index d6a95ef9131d..ba386bd94107 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -34,7 +34,6 @@ #include <asm/current.h> #include <asm/hw_breakpoint.h> #include <asm/kdebug.h> -#include <asm/system.h> #include <asm/traps.h> /* Breakpoint currently in use for each BRP. */ diff --git a/arch/arm/kernel/insn.c b/arch/arm/kernel/insn.c new file mode 100644 index 000000000000..b760340b7014 --- /dev/null +++ b/arch/arm/kernel/insn.c @@ -0,0 +1,62 @@ +#include <linux/bug.h> +#include <linux/kernel.h> +#include <asm/opcodes.h> + +static unsigned long +__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link) +{ + unsigned long s, j1, j2, i1, i2, imm10, imm11; + unsigned long first, second; + long offset; + + offset = (long)addr - (long)(pc + 4); + if (offset < -16777216 || offset > 16777214) { + WARN_ON_ONCE(1); + return 0; + } + + s = (offset >> 24) & 0x1; + i1 = (offset >> 23) & 0x1; + i2 = (offset >> 22) & 0x1; + imm10 = (offset >> 12) & 0x3ff; + imm11 = (offset >> 1) & 0x7ff; + + j1 = (!i1) ^ s; + j2 = (!i2) ^ s; + + first = 0xf000 | (s << 10) | imm10; + second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11; + if (link) + second |= 1 << 14; + + return __opcode_thumb32_compose(first, second); +} + +static unsigned long +__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link) +{ + unsigned long opcode = 0xea000000; + long offset; + + if (link) + opcode |= 1 << 24; + + offset = (long)addr - (long)(pc + 8); + if (unlikely(offset < -33554432 || offset > 33554428)) { + WARN_ON_ONCE(1); + return 0; + } + + offset = (offset >> 2) & 0x00ffffff; + + return opcode | offset; +} + +unsigned long +__arm_gen_branch(unsigned long pc, unsigned long addr, bool link) +{ + if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) + return __arm_gen_branch_thumb2(pc, addr, link); + else + return __arm_gen_branch_arm(pc, addr, link); +} diff --git a/arch/arm/kernel/insn.h b/arch/arm/kernel/insn.h new file mode 100644 index 000000000000..e96065da4dae --- /dev/null +++ b/arch/arm/kernel/insn.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ARM_INSN_H +#define __ASM_ARM_INSN_H + +static inline unsigned long +arm_gen_nop(void) +{ +#ifdef CONFIG_THUMB2_KERNEL + return 0xf3af8000; /* nop.w */ +#else + return 0xe1a00000; /* mov r0, r0 */ +#endif +} + +unsigned long +__arm_gen_branch(unsigned long pc, unsigned long addr, bool link); + +static inline unsigned long +arm_gen_branch(unsigned long pc, unsigned long addr) +{ + return __arm_gen_branch(pc, addr, false); +} + +static inline unsigned long +arm_gen_branch_link(unsigned long pc, unsigned long addr) +{ + return __arm_gen_branch(pc, addr, true); +} + +#endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3efd82cc95f0..71ccdbfed662 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -36,7 +36,6 @@ #include <linux/proc_fs.h> #include <asm/exception.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -181,10 +180,7 @@ void migrate_irqs(void) local_irq_save(flags); for_each_irq_desc(i, desc) { - bool affinity_broken = false; - - if (!desc) - continue; + bool affinity_broken; raw_spin_lock(&desc->lock); affinity_broken = migrate_one_irq(desc); diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c new file mode 100644 index 000000000000..4ce4f789446d --- /dev/null +++ b/arch/arm/kernel/jump_label.c @@ -0,0 +1,39 @@ +#include <linux/kernel.h> +#include <linux/jump_label.h> + +#include "insn.h" +#include "patch.h" + +#ifdef HAVE_JUMP_LABEL + +static void __arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type, + bool is_static) +{ + void *addr = (void *)entry->code; + unsigned int insn; + + if (type == JUMP_LABEL_ENABLE) + insn = arm_gen_branch(entry->code, entry->target); + else + insn = arm_gen_nop(); + + if (is_static) + __patch_text(addr, insn); + else + patch_text(addr, insn); +} + +void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type) +{ + __arch_jump_label_transform(entry, type, false); +} + +void arch_jump_label_transform_static(struct jump_entry *entry, + enum jump_label_type type) +{ + __arch_jump_label_transform(entry, type, true); +} + +#endif diff --git a/arch/arm/kernel/kprobes-common.c b/arch/arm/kernel/kprobes-common.c index a5394fb4e4e0..18a76282970e 100644 --- a/arch/arm/kernel/kprobes-common.c +++ b/arch/arm/kernel/kprobes-common.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> +#include <asm/system_info.h> #include "kprobes.h" diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 129c1163248b..4dd41fc9e235 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -29,6 +29,7 @@ #include <asm/cacheflush.h> #include "kprobes.h" +#include "patch.h" #define MIN_STACK_SIZE(addr) \ min((unsigned long)MAX_STACK_SIZE, \ @@ -103,57 +104,33 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) return 0; } -#ifdef CONFIG_THUMB2_KERNEL - -/* - * For a 32-bit Thumb breakpoint spanning two memory words we need to take - * special precautions to insert the breakpoint atomically, especially on SMP - * systems. This is achieved by calling this arming function using stop_machine. - */ -static int __kprobes set_t32_breakpoint(void *addr) -{ - ((u16 *)addr)[0] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION >> 16; - ((u16 *)addr)[1] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION & 0xffff; - flush_insns(addr, 2*sizeof(u16)); - return 0; -} - void __kprobes arch_arm_kprobe(struct kprobe *p) { - uintptr_t addr = (uintptr_t)p->addr & ~1; /* Remove any Thumb flag */ - - if (!is_wide_instruction(p->opcode)) { - *(u16 *)addr = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION; - flush_insns(addr, sizeof(u16)); - } else if (addr & 2) { - /* A 32-bit instruction spanning two words needs special care */ - stop_machine(set_t32_breakpoint, (void *)addr, &cpu_online_map); + unsigned int brkp; + void *addr; + + if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) { + /* Remove any Thumb flag */ + addr = (void *)((uintptr_t)p->addr & ~1); + + if (is_wide_instruction(p->opcode)) + brkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION; + else + brkp = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION; } else { - /* Word aligned 32-bit instruction can be written atomically */ - u32 bkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION; -#ifndef __ARMEB__ /* Swap halfwords for little-endian */ - bkp = (bkp >> 16) | (bkp << 16); -#endif - *(u32 *)addr = bkp; - flush_insns(addr, sizeof(u32)); - } -} + kprobe_opcode_t insn = p->opcode; -#else /* !CONFIG_THUMB2_KERNEL */ + addr = p->addr; + brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION; -void __kprobes arch_arm_kprobe(struct kprobe *p) -{ - kprobe_opcode_t insn = p->opcode; - kprobe_opcode_t brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION; - if (insn >= 0xe0000000) - brkp |= 0xe0000000; /* Unconditional instruction */ - else - brkp |= insn & 0xf0000000; /* Copy condition from insn */ - *p->addr = brkp; - flush_insns(p->addr, sizeof(p->addr[0])); -} + if (insn >= 0xe0000000) + brkp |= 0xe0000000; /* Unconditional instruction */ + else + brkp |= insn & 0xf0000000; /* Copy condition from insn */ + } -#endif /* !CONFIG_THUMB2_KERNEL */ + patch_text(addr, brkp); +} /* * The actual disarming is done here on each CPU and synchronized using @@ -166,31 +143,16 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) int __kprobes __arch_disarm_kprobe(void *p) { struct kprobe *kp = p; -#ifdef CONFIG_THUMB2_KERNEL - u16 *addr = (u16 *)((uintptr_t)kp->addr & ~1); - kprobe_opcode_t insn = kp->opcode; - unsigned int len; + void *addr = (void *)((uintptr_t)kp->addr & ~1); - if (is_wide_instruction(insn)) { - ((u16 *)addr)[0] = insn>>16; - ((u16 *)addr)[1] = insn; - len = 2*sizeof(u16); - } else { - ((u16 *)addr)[0] = insn; - len = sizeof(u16); - } - flush_insns(addr, len); + __patch_text(addr, kp->opcode); -#else /* !CONFIG_THUMB2_KERNEL */ - *kp->addr = kp->opcode; - flush_insns(kp->addr, sizeof(kp->addr[0])); -#endif return 0; } void __kprobes arch_disarm_kprobe(struct kprobe *p) { - stop_machine(__arch_disarm_kprobe, p, &cpu_online_map); + stop_machine(__arch_disarm_kprobe, p, cpu_online_mask); } void __kprobes arch_remove_kprobe(struct kprobe *p) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 764bd456d84f..dfcdb9f7c126 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -7,12 +7,13 @@ #include <linux/delay.h> #include <linux/reboot.h> #include <linux/io.h> +#include <linux/irq.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/mach-types.h> -#include <asm/system.h> +#include <asm/system_misc.h> extern const unsigned char relocate_new_kernel[]; extern const unsigned int relocate_new_kernel_size; @@ -53,6 +54,29 @@ void machine_crash_nonpanic_core(void *unused) cpu_relax(); } +static void machine_kexec_mask_interrupts(void) +{ + unsigned int i; + struct irq_desc *desc; + + for_each_irq_desc(i, desc) { + struct irq_chip *chip; + + chip = irq_desc_get_chip(desc); + if (!chip) + continue; + + if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data)) + chip->irq_eoi(&desc->irq_data); + + if (chip->irq_mask) + chip->irq_mask(&desc->irq_data); + + if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data)) + chip->irq_disable(&desc->irq_data); + } +} + void machine_crash_shutdown(struct pt_regs *regs) { unsigned long msecs; @@ -70,6 +94,7 @@ void machine_crash_shutdown(struct pt_regs *regs) printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n"); crash_save_cpu(regs, smp_processor_id()); + machine_kexec_mask_interrupts(); printk(KERN_INFO "Loading crashdump kernel...\n"); } diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c new file mode 100644 index 000000000000..07314af47733 --- /dev/null +++ b/arch/arm/kernel/patch.c @@ -0,0 +1,75 @@ +#include <linux/kernel.h> +#include <linux/kprobes.h> +#include <linux/stop_machine.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include <asm/opcodes.h> + +#include "patch.h" + +struct patch { + void *addr; + unsigned int insn; +}; + +void __kprobes __patch_text(void *addr, unsigned int insn) +{ + bool thumb2 = IS_ENABLED(CONFIG_THUMB2_KERNEL); + int size; + + if (thumb2 && __opcode_is_thumb16(insn)) { + *(u16 *)addr = __opcode_to_mem_thumb16(insn); + size = sizeof(u16); + } else if (thumb2 && ((uintptr_t)addr & 2)) { + u16 first = __opcode_thumb32_first(insn); + u16 second = __opcode_thumb32_second(insn); + u16 *addrh = addr; + + addrh[0] = __opcode_to_mem_thumb16(first); + addrh[1] = __opcode_to_mem_thumb16(second); + + size = sizeof(u32); + } else { + if (thumb2) + insn = __opcode_to_mem_thumb32(insn); + else + insn = __opcode_to_mem_arm(insn); + + *(u32 *)addr = insn; + size = sizeof(u32); + } + + flush_icache_range((uintptr_t)(addr), + (uintptr_t)(addr) + size); +} + +static int __kprobes patch_text_stop_machine(void *data) +{ + struct patch *patch = data; + + __patch_text(patch->addr, patch->insn); + + return 0; +} + +void __kprobes patch_text(void *addr, unsigned int insn) +{ + struct patch patch = { + .addr = addr, + .insn = insn, + }; + + if (cache_ops_need_broadcast()) { + stop_machine(patch_text_stop_machine, &patch, cpu_online_mask); + } else { + bool straddles_word = IS_ENABLED(CONFIG_THUMB2_KERNEL) + && __opcode_is_thumb32(insn) + && ((uintptr_t)addr & 2); + + if (straddles_word) + stop_machine(patch_text_stop_machine, &patch, NULL); + else + __patch_text(addr, insn); + } +} diff --git a/arch/arm/kernel/patch.h b/arch/arm/kernel/patch.h new file mode 100644 index 000000000000..b4731f2dac38 --- /dev/null +++ b/arch/arm/kernel/patch.h @@ -0,0 +1,7 @@ +#ifndef _ARM_KERNEL_PATCH_H +#define _ARM_KERNEL_PATCH_H + +void patch_text(void *addr, unsigned int insn); +void __patch_text(void *addr, unsigned int insn); + +#endif diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 8a89d3b7626b..186c8cb982c5 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -738,6 +738,9 @@ init_hw_perf_events(void) case 0xC0F0: /* Cortex-A15 */ cpu_pmu = armv7_a15_pmu_init(); break; + case 0xC070: /* Cortex-A7 */ + cpu_pmu = armv7_a7_pmu_init(); + break; } /* Intel CPUs [xscale]. */ } else if (0x69 == implementor) { diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4d7095af2ab3..00755d82e2f2 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -610,6 +610,130 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }; /* + * Cortex-A7 HW events mapping + */ +static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* * Perf Events' indices */ #define ARMV7_IDX_CYCLE_COUNTER 0 @@ -1104,6 +1228,12 @@ static int armv7_a15_map_event(struct perf_event *event) &armv7_a15_perf_cache_map, 0xFF); } +static int armv7_a7_map_event(struct perf_event *event) +{ + return map_cpu_event(event, &armv7_a7_perf_map, + &armv7_a7_perf_cache_map, 0xFF); +} + static struct arm_pmu armv7pmu = { .handle_irq = armv7pmu_handle_irq, .enable = armv7pmu_enable_event, @@ -1164,6 +1294,16 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) armv7pmu.set_event_filter = armv7pmu_set_event_filter; return &armv7pmu; } + +static struct arm_pmu *__init armv7_a7_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA7; + armv7pmu.name = "ARMv7 Cortex-A7"; + armv7pmu.map_event = armv7_a7_map_event; + armv7pmu.num_events = armv7_read_num_pmnc_events(); + armv7pmu.set_event_filter = armv7pmu_set_event_filter; + return &armv7pmu; +} #else static struct arm_pmu *__init armv7_a8_pmu_init(void) { @@ -1184,4 +1324,9 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) { return NULL; } + +static struct arm_pmu *__init armv7_a7_pmu_init(void) +{ + return NULL; +} #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d3eca4524533..2b7b017a20cd 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -35,7 +35,6 @@ #include <asm/cacheflush.h> #include <asm/leds.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/thread_notify.h> #include <asm/stacktrace.h> #include <asm/mach/time.h> @@ -529,21 +528,39 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) #ifdef CONFIG_MMU /* * The vectors page is always readable from user space for the - * atomic helpers and the signal restart code. Let's declare a mapping - * for it so it is visible through ptrace and /proc/<pid>/mem. + * atomic helpers and the signal restart code. Insert it into the + * gate_vma so that it is visible through ptrace and /proc/<pid>/mem. */ +static struct vm_area_struct gate_vma; -int vectors_user_mapping(void) +static int __init gate_vma_init(void) { - struct mm_struct *mm = current->mm; - return install_special_mapping(mm, 0xffff0000, PAGE_SIZE, - VM_READ | VM_EXEC | - VM_MAYREAD | VM_MAYEXEC | VM_RESERVED, - NULL); + gate_vma.vm_start = 0xffff0000; + gate_vma.vm_end = 0xffff0000 + PAGE_SIZE; + gate_vma.vm_page_prot = PAGE_READONLY_EXEC; + gate_vma.vm_flags = VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYEXEC; + return 0; +} +arch_initcall(gate_vma_init); + +struct vm_area_struct *get_gate_vma(struct mm_struct *mm) +{ + return &gate_vma; +} + +int in_gate_area(struct mm_struct *mm, unsigned long addr) +{ + return (addr >= gate_vma.vm_start) && (addr < gate_vma.vm_end); +} + +int in_gate_area_no_mm(unsigned long addr) +{ + return in_gate_area(NULL, addr); } const char *arch_vma_name(struct vm_area_struct *vma) { - return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL; + return (vma == &gate_vma) ? "[vectors]" : NULL; } #endif diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index ede6443c34d9..80abafb9bf33 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -26,7 +26,6 @@ #include <linux/audit.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/traps.h> #define REG_PC 15 @@ -257,7 +256,7 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off, { unsigned long tmp; - if (off & 3 || off >= sizeof(struct user)) + if (off & 3) return -EIO; tmp = 0; @@ -269,6 +268,8 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off, tmp = tsk->mm->end_code; else if (off < sizeof(struct pt_regs)) tmp = get_user_reg(tsk, off >> 2); + else if (off >= sizeof(struct user)) + return -EIO; return put_user(tmp, ret); } diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c12528..27d186abbc06 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -10,6 +10,7 @@ #include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/syscore_ops.h> #include <linux/timer.h> #include <asm/sched_clock.h> @@ -164,3 +165,20 @@ void __init sched_clock_postinit(void) sched_clock_poll(sched_clock_timer.data); } + +static int sched_clock_suspend(void) +{ + sched_clock_poll(sched_clock_timer.data); + return 0; +} + +static struct syscore_ops sched_clock_ops = { + .suspend = sched_clock_suspend, +}; + +static int __init sched_clock_syscore_init(void) +{ + register_syscore_ops(&sched_clock_ops); + return 0; +} +device_initcall(sched_clock_syscore_init); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index a255c39612ca..b91411371ae1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -33,6 +33,7 @@ #include <linux/sort.h> #include <asm/unified.h> +#include <asm/cp15.h> #include <asm/cpu.h> #include <asm/cputype.h> #include <asm/elf.h> @@ -44,12 +45,13 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/tlbflush.h> -#include <asm/system.h> #include <asm/prom.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <asm/system_info.h> +#include <asm/system_misc.h> #include <asm/traps.h> #include <asm/unwind.h> #include <asm/memblock.h> @@ -974,7 +976,6 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif - early_trap_init(); if (mdesc->init_early) mdesc->init_early(); diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 9e617bd4a146..7cb532fc8aa4 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -66,12 +66,13 @@ const unsigned long syscall_restart_code[2] = { */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) { - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); + sigset_t blocked; + current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + + mask &= _BLOCKABLE; + siginitset(&blocked, mask); + set_current_blocked(&blocked); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -280,10 +281,7 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set)); if (err == 0) { sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); } __get_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err); @@ -636,13 +634,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, /* * Block the signal if we were successful. */ - spin_lock_irq(&tsk->sighand->siglock); - sigorsets(&tsk->blocked, &tsk->blocked, - &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(&tsk->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(&tsk->sighand->siglock); + block_sigmask(ka, sig); return 0; } diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 1f268bda4552..987dcf33415c 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -4,7 +4,6 @@ #include <asm/assembler.h> #include <asm/glue-cache.h> #include <asm/glue-proc.h> -#include <asm/system.h> .text /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8f8cce2c46c4..addbbe8028c2 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -58,6 +58,8 @@ enum ipi_msg_type { IPI_CPU_STOP, }; +static DECLARE_COMPLETION(cpu_running); + int __cpuinit __cpu_up(unsigned int cpu) { struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); @@ -98,20 +100,12 @@ int __cpuinit __cpu_up(unsigned int cpu) */ ret = boot_secondary(cpu, idle); if (ret == 0) { - unsigned long timeout; - /* * CPU was successfully started, wait for it * to come online or time out. */ - timeout = jiffies + HZ; - while (time_before(jiffies, timeout)) { - if (cpu_online(cpu)) - break; - - udelay(10); - barrier(); - } + wait_for_completion_timeout(&cpu_running, + msecs_to_jiffies(1000)); if (!cpu_online(cpu)) { pr_crit("CPU%u: failed to come online\n", cpu); @@ -288,9 +282,10 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, now it's safe to let the boot CPU continue. Wait for * the CPU migration code to notice that the CPU is online - * before we continue. + * before we continue - which happens after __cpu_up returns. */ set_cpu_online(cpu, true); + complete(&cpu_running); /* * Setup the percpu timer for this CPU. @@ -354,7 +349,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * re-initialize the map in platform_smp_prepare_cpus() if * present != possible (e.g. physical hotplug). */ - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); /* * Initialise the SCU if there are more than one CPU @@ -586,8 +581,9 @@ void smp_send_stop(void) unsigned long timeout; if (num_online_cpus() > 1) { - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); + struct cpumask mask; + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); smp_cross_call(&mask, IPI_CPU_STOP); } diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 7dcb35285be7..02c5d2ce23bf 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -13,18 +13,6 @@ #include <asm/smp_plat.h> #include <asm/tlbflush.h> -static void on_each_cpu_mask(void (*func)(void *), void *info, int wait, - const struct cpumask *mask) -{ - preempt_disable(); - - smp_call_function_many(mask, func, info, wait); - if (cpumask_test_cpu(smp_processor_id(), mask)) - func(info); - - preempt_enable(); -} - /**********************************************************************/ /* @@ -87,7 +75,7 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { if (tlb_ops_need_broadcast()) - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm)); + on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1); else local_flush_tlb_mm(mm); } @@ -98,7 +86,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm)); + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, + &ta, 1); } else local_flush_tlb_page(vma, uaddr); } @@ -121,7 +110,8 @@ void flush_tlb_range(struct vm_area_struct *vma, ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm)); + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, + &ta, 1); } else local_flush_tlb_range(vma, start, end); } diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 01ec453bb924..30ae6bb4a310 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -16,6 +16,7 @@ #include <asm/cputype.h> #include <asm/mach/map.h> #include <asm/memory.h> +#include <asm/system_info.h> #include "tcm.h" static struct gen_pool *tcm_pool; diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c index 9cb7aaca159f..aab899764053 100644 --- a/arch/arm/kernel/thumbee.c +++ b/arch/arm/kernel/thumbee.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <asm/system_info.h> #include <asm/thread_notify.h> /* diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 8c57dd3680e9..fe31b22f18fd 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -25,8 +25,6 @@ #include <linux/timer.h> #include <linux/irq.h> -#include <linux/mc146818rtc.h> - #include <asm/leds.h> #include <asm/thread_info.h> #include <asm/sched_clock.h> @@ -149,8 +147,6 @@ void __init time_init(void) { system_timer = machine_desc->timer; system_timer->init(); -#ifdef CONFIG_HAVE_SCHED_CLOCK sched_clock_postinit(); -#endif } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f84dfe67724f..778454750a6c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -29,11 +29,11 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/exception.h> -#include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> #include <asm/unwind.h> #include <asm/tls.h> +#include <asm/system_misc.h> #include "signal.h" @@ -227,6 +227,11 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) #else #define S_SMP "" #endif +#ifdef CONFIG_THUMB2_KERNEL +#define S_ISA " THUMB2" +#else +#define S_ISA " ARM" +#endif static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs) { @@ -234,8 +239,8 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt static int die_counter; int ret; - printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n", - str, err, ++die_counter); + printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP + S_ISA "\n", str, err, ++die_counter); /* trap and error numbers are mostly meaningless on ARM */ ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV); @@ -784,18 +789,16 @@ static void __init kuser_get_tls_init(unsigned long vectors) memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); } -void __init early_trap_init(void) +void __init early_trap_init(void *vectors_base) { -#if defined(CONFIG_CPU_USE_DOMAINS) - unsigned long vectors = CONFIG_VECTORS_BASE; -#else - unsigned long vectors = (unsigned long)vectors_page; -#endif + unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; extern char __kuser_helper_start[], __kuser_helper_end[]; int kuser_sz = __kuser_helper_end - __kuser_helper_start; + vectors_page = vectors_base; + /* * Copy the vectors, stubs and kuser helpers (in entry-armv.S) * into the vector page, mapped at 0xffff0000, and ensure these diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e55cdcbd81fb..45db05d8d94c 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -20,9 +20,11 @@ config HAVE_AT91_USART5 config AT91_SAM9_ALT_RESET bool + default !ARCH_AT91X40 config AT91_SAM9G45_RESET bool + default !ARCH_AT91X40 menu "Atmel AT91 System-on-Chip" @@ -45,7 +47,6 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -53,7 +54,6 @@ config ARCH_AT91SAM9261 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G10 bool "AT91SAM9G10" @@ -61,7 +61,6 @@ config ARCH_AT91SAM9G10 select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9263 bool "AT91SAM9263" @@ -70,7 +69,6 @@ config ARCH_AT91SAM9263 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -79,7 +77,6 @@ config ARCH_AT91SAM9RL select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G20 bool "AT91SAM9G20" @@ -90,7 +87,6 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB - select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G45 bool "AT91SAM9G45" @@ -100,7 +96,6 @@ config ARCH_AT91SAM9G45 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 - select AT91_SAM9G45_RESET config ARCH_AT91SAM9X5 bool "AT91SAM9x5 family" @@ -109,7 +104,6 @@ config ARCH_AT91SAM9X5 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU0 - select AT91_SAM9G45_RESET config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 0df1045311e4..364c19357e60 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -15,6 +15,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/at91rm9200.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 14b5a9c9a514..46f774233298 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> @@ -216,6 +217,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7e5651ee9f85..5652dde4bbe2 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -598,6 +598,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 684c5dfd92ac..7de81e6222f1 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> #include <mach/at91_pmc.h> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 096da87dc00d..4db961a93085 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 0b4fa5a7f685..ef301be66575 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/at91sam9263.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 53688c46f956..fe99206de880 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ @@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 0014573dfe17..d222f8333dab 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/at91sam9g45.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> @@ -232,6 +233,8 @@ static struct clk_lookup periph_clocks_lookups[] = { /* more tc lookup table for DT entries */ CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 4320b2096789..6b008aee1dff 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -127,12 +127,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } usbh_ehci_data = *data; @@ -437,7 +439,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) /* DMA slave channel configuration */ atslave->dma_dev = &at_hdmac_device.dev; - atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT; atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW; atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16; @@ -786,6 +787,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 63d9372eb18e..d9f2774f385e 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -15,6 +15,7 @@ #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index eda72e83037d..fe4ae22e8561 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + /* enable chip-select pin */ at91_set_gpio_output(cs_pin, 1); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index a34d96afa746..13c8cae60462 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -131,7 +131,7 @@ static struct clk dma1_clk = { .type = CLK_TYPE_PERIPHERAL, }; static struct clk uhphs_clk = { - .name = "uhphs_clk", + .name = "uhphs", .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS, .type = CLK_TYPE_PERIPHERAL, }; @@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), @@ -230,6 +232,9 @@ static struct clk_lookup periph_clocks_lookups[] = { /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), + CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), }; /* @@ -299,14 +304,8 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } -static void __init at91sam9x5_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512); -} - void __init at91sam9x5_initialize(void) { - arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); /* Register GPIO subsystem (using DT) */ @@ -314,11 +313,6 @@ void __init at91sam9x5_initialize(void) } /* -------------------------------------------------------------------- - * AT91SAM9x5 devices (temporary before modification of code) - * -------------------------------------------------------------------- */ -void __init at91_add_device_nand(struct atmel_nand_data *data) {} - -/* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ /* @@ -362,7 +356,6 @@ static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91sam9x5_soc = { .map_io = at91sam9x5_map_io, .default_irq_priority = at91sam9x5_default_irq_priority, - .ioremap_registers = at91sam9x5_ioremap_registers, .register_clocks = at91sam9x5_register_clocks, .init = at91sam9x5_initialize, }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 5400a1d65035..d62fe090d814 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 3bb40694b02d..161efbaa1029 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, + .ecc_mode = NAND_ECC_SOFT, .parts = afeb9260_nand_partition, .num_parts = ARRAY_SIZE(afeb9260_nand_partition), .det_pin = -EINVAL, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 8510e9e54988..c6d44ee0c77e 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA9, .enable_pin = AT91_PIN_PA7, + .ecc_mode = NAND_ECC_SOFT, .parts = cam60_nand_partition, .num_parts = ARRAY_SIZE(cam60_nand_partition), }; diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 989e1c5a9ca0..5f3680e7c883 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = { .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; #ifdef CONFIG_MACH_CPU9260 diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index 583b72472ad9..c18d4d307801 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -19,10 +19,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/hardware.h> #include <mach/board.h> -#include <mach/system_rev.h> -#include <mach/at91sam9_smc.h> #include <asm/setup.h> #include <asm/irq.h> @@ -30,58 +27,9 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include "sam9_smc.h" #include "generic.h" -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.000 MHz crystal */ - at91_initialize(12000000); -} - -/* det_pin is not connected */ -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC8, - .enable_pin = AT91_PIN_PC14, -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, @@ -98,9 +46,6 @@ static void __init at91_dt_init_irq(void) static void __init at91_dt_device_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - /* NAND */ - ek_add_device_nand(); } static const char *at91_dt_board_compat[] __initdata = { @@ -114,7 +59,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, - .init_early = ek_init_early, + .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, .init_machine = at91_dt_device_init, .dt_compat = at91_dt_board_compat, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index bb9914582013..59b92aab9bcf 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC29, .enable_pin = AT91_PIN_PC28, + .ecc_mode = NAND_ECC_SOFT, .parts = kb9202_nand_partition, .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 3f8617c0e04e..57d5f6a4726a 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = { .rdy_pin = AT91_PIN_PB19, .rdy_pin_active_low = 1, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, .parts = neocore926_nand_partition, .num_parts = ARRAY_SIZE(neocore926_nand_partition), .det_pin = -EINVAL, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index e029d220cb84..b6ed5ed7081a 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -138,6 +138,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 9083df04e7ed..01332aa538b2 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -150,6 +150,8 @@ static struct atmel_nand_data __initdata dk_nand_data = { .det_pin = AT91_PIN_PB1, .rdy_pin = AT91_PIN_PC2, .enable_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = dk_nand_partition, .num_parts = ARRAY_SIZE(dk_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 84bce587735f..e8b116b6cba6 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index be8233bcabdc..d5aec55b0eb4 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -181,6 +181,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 40895072a1a7..c3f994462864 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 29f66052fe63..2ffe50f3a9e9 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -74,6 +74,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, + .vbus_pin_active_low = {1, 1}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -187,6 +188,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 843d6286c6f4..8923ec9f5831 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -166,6 +166,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 57497e2b8878..c88e908ddd82 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -71,6 +71,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_hs_data = { .ports = 2, .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3}, + .vbus_pin_active_low = {1, 1}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -148,6 +149,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index c1366d0032bf..b109ce2ba864 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -94,6 +94,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PD17, .enable_pin = AT91_PIN_PB6, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 3c2e3fcc310c..ebc9d01ce742 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = { .bus_width_16 = 0, .enable_pin = -EINVAL, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 72eb3b4d9ab6..7640049410a0 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = { .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata nand_smc_config = { diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 26c36fc2d1e5..b7483a3d0980 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -198,6 +198,8 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, + .on_flash_bbt = 1, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 52f460768f71..38dd279d30b2 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ + .ecc_mode = NAND_ECC_SOFT, .parts = yl9200_nand_partition, .num_parts = ARRAY_SIZE(yl9200_nand_partition), }; diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index be51ca7f694d..a0f4d7424cdc 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/of_address.h> #include <mach/hardware.h> #include <mach/at91_pmc.h> @@ -671,16 +672,12 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); } -int __init at91_clock_init(unsigned long main_clock) +static int __init at91_pmc_init(unsigned long main_clock) { unsigned tmp, freq, mckr; int i; int pll_overclock = false; - at91_pmc_base = ioremap(AT91_PMC, 256); - if (!at91_pmc_base) - panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC); - /* * When the bootloader initialized the main oscillator correctly, * there's no problem using the cycle counter. But if it didn't, @@ -802,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock) return 0; } +#if defined(CONFIG_OF) +static struct of_device_id pmc_ids[] = { + { .compatible = "atmel,at91rm9200-pmc" }, + { /*sentinel*/ } +}; + +static struct of_device_id osc_ids[] = { + { .compatible = "atmel,osc" }, + { /*sentinel*/ } +}; + +int __init at91_dt_clock_init(void) +{ + struct device_node *np; + u32 main_clock = 0; + + np = of_find_matching_node(NULL, pmc_ids); + if (!np) + panic("unable to find compatible pmc node in dtb\n"); + + at91_pmc_base = of_iomap(np, 0); + if (!at91_pmc_base) + panic("unable to map pmc cpu registers\n"); + + of_node_put(np); + + /* retrieve the freqency of fixed clocks from device tree */ + np = of_find_matching_node(NULL, osc_ids); + if (np) { + u32 rate; + if (!of_property_read_u32(np, "clock-frequency", &rate)) + main_clock = rate; + } + + of_node_put(np); + + return at91_pmc_init(main_clock); +} +#endif + +int __init at91_clock_init(unsigned long main_clock) +{ + at91_pmc_base = ioremap(AT91_PMC, 256); + if (!at91_pmc_base) + panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC); + + return at91_pmc_init(main_clock); +} + /* * Several unused clocks may be active. Turn them off. */ diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 555d956b3a57..ece1f9aefb47 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -17,9 +17,10 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/cpuidle.h> -#include <asm/proc-fns.h> #include <linux/io.h> #include <linux/export.h> +#include <asm/proc-fns.h> +#include <asm/cpuidle.h> #include "pm.h" @@ -27,61 +28,39 @@ static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device); -static struct cpuidle_driver at91_idle_driver = { - .name = "at91_idle", - .owner = THIS_MODULE, -}; - /* Actual code that puts the SoC in different idle states */ static int at91_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - if (index == 0) - /* Wait for interrupt state */ - cpu_do_idle(); - else if (index == 1) - at91_standby(); + at91_standby(); - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - dev->last_residency = idle_time; return index; } +static struct cpuidle_driver at91_idle_driver = { + .name = "at91_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = at91_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "RAM_SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = AT91_MAX_STATES, +}; + /* Initialize CPU idle by registering the idle states */ static int at91_init_cpuidle(void) { struct cpuidle_device *device; - struct cpuidle_driver *driver = &at91_idle_driver; device = &per_cpu(at91_cpuidle_device, smp_processor_id()); device->state_count = AT91_MAX_STATES; - driver->state_count = AT91_MAX_STATES; - - /* Wait for interrupt state */ - driver->states[0].enter = at91_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and RAM self refresh state */ - driver->states[1].enter = at91_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "RAM_SR"); - strcpy(driver->states[1].desc, "WFI and RAM Self Refresh"); cpuidle_register_driver(&at91_idle_driver); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 459f01a4a546..dd9b346c451d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91_dt_initialize(void); /* Interrupts */ extern void __init at91_init_irq_default(void); @@ -52,6 +53,7 @@ extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); #ifdef CONFIG_AT91_PMC_UNIT extern int __init at91_clock_init(unsigned long main_clock); +extern int __init at91_dt_clock_init(void); #else static int inline at91_clock_init(unsigned long main_clock) { return 0; } #endif diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h index 1d4fe822c77a..60478ea8bd46 100644 --- a/arch/arm/mach-at91/include/mach/at91_shdwc.h +++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h @@ -36,9 +36,11 @@ extern void __iomem *at91_shdwc_base; #define AT91_SHDW_WKMODE0_HIGH 1 #define AT91_SHDW_WKMODE0_LOW 2 #define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */ #define AT91_SHDW_CPTWK0_(x) ((x) << 4) #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ +#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */ #define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index a297a77d88e2..88e43d534cdf 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -55,11 +55,6 @@ #define AT91SAM9X5_BASE_USART2 0xf8024000 /* - * System Peripherals - */ -#define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800 - -/* * Base addresses for early serial code (uncompress.h) */ #define AT91_DBGU AT91_BASE_DBGU0 diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h index 187cb58345c0..fff48d1a0f4e 100644 --- a/arch/arm/mach-at91/include/mach/at_hdmac.h +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -24,18 +24,6 @@ struct at_dma_platform_data { }; /** - * enum at_dma_slave_width - DMA slave register access width. - * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses - * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses - * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses - */ -enum at_dma_slave_width { - AT_DMA_SLAVE_WIDTH_8BIT = 0, - AT_DMA_SLAVE_WIDTH_16BIT, - AT_DMA_SLAVE_WIDTH_32BIT, -}; - -/** * struct at_dma_slave - Controller-specific information about a slave * @dma_dev: required DMA master device * @tx_reg: physical address of data register used for @@ -48,9 +36,6 @@ enum at_dma_slave_width { */ struct at_dma_slave { struct device *dma_dev; - dma_addr_t tx_reg; - dma_addr_t rx_reg; - enum at_dma_slave_width reg_width; u32 cfg; u32 ctrla; }; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index dc8d6d4f17cf..49a821192c65 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -41,6 +41,7 @@ #include <sound/atmel-ac97c.h> #include <linux/serial.h> #include <linux/platform_data/macb.h> +#include <linux/platform_data/atmel.h> /* USB Device */ struct at91_udc_data { @@ -85,33 +86,20 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 struct at91_usbh_data { - u8 ports; /* number of ports on root hub */ - int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_active_low[2]; + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ u8 overcurrent_supported; - int overcurrent_pin[2]; - u8 overcurrent_status[2]; - u8 overcurrent_changed[2]; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); - /* NAND / SmartMedia */ -struct atmel_nand_data { - int enable_pin; /* chip enable */ - int det_pin; /* card detect */ - int rdy_pin; /* ready/busy */ - u8 rdy_pin_active_low; /* rdy_pin value is inverted */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - u8 correction_cap; /* PMECC correction capability */ - u16 sector_size; /* Sector size for PMECC */ - struct mtd_partition *parts; - unsigned int num_parts; -}; extern void __init at91_add_device_nand(struct atmel_nand_data *data); /* I2C*/ diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 4003001eca3d..2d9ca0455745 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -21,11 +21,7 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include <mach/hardware.h> - #define IO_SPACE_LIMIT 0xFFFFFFFF - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) +#define __io(a) __typesafe_io(a) #endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index ec164a4124c9..ef79a9aafc08 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -7,6 +7,8 @@ #ifndef __ARCH_SYSTEM_REV_H__ #define __ARCH_SYSTEM_REV_H__ +#include <asm/system_info.h> + /* * board revision encoding * mach specific diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 0234fd9d20d6..4218647c1fcd 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/atmel_serial.h> +#include <mach/hardware.h> #if defined(CONFIG_AT91_EARLY_DBGU0) #define UART_OFFSET AT91_BASE_DBGU0 diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 6c9d5e69ac28..f630250c6b87 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -197,19 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, extern u32 at91_slow_clock_sz; #endif -void __iomem *at91_ramc_base[2]; - -void __init at91_ioremap_ramc(int id, u32 addr, u32 size) -{ - if (id < 0 || id > 1) { - pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id); - BUG(); - } - at91_ramc_base[id] = ioremap(addr, size); - if (!at91_ramc_base[id]) - panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); -} - static int at91_pm_enter(suspend_state_t state) { at91_gpio_suspend(); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 372396c2ecb6..97cc04dc8073 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -9,7 +9,9 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/pm.h> +#include <linux/of_address.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -51,6 +53,19 @@ void __init at91_init_interrupts(unsigned int *priority) at91_gpio_irq_setup(); } +void __iomem *at91_ramc_base[2]; + +void __init at91_ioremap_ramc(int id, u32 addr, u32 size) +{ + if (id < 0 || id > 1) { + pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id); + BUG(); + } + at91_ramc_base[id] = ioremap(addr, size); + if (!at91_ramc_base[id]) + panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); +} + static struct map_desc sram_desc[2] __initdata; void __init at91_init_sram(int bank, unsigned long base, unsigned int length) @@ -285,6 +300,150 @@ void __init at91_ioremap_matrix(u32 base_addr) panic("Impossible to ioremap at91_matrix_base\n"); } +#if defined(CONFIG_OF) +static struct of_device_id rstc_ids[] = { + { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, + { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, + { /*sentinel*/ } +}; + +static void at91_dt_rstc(void) +{ + struct device_node *np; + const struct of_device_id *of_id; + + np = of_find_matching_node(NULL, rstc_ids); + if (!np) + panic("unable to find compatible rstc node in dtb\n"); + + at91_rstc_base = of_iomap(np, 0); + if (!at91_rstc_base) + panic("unable to map rstc cpu registers\n"); + + of_id = of_match_node(rstc_ids, np); + if (!of_id) + panic("AT91: rtsc no restart function availlable\n"); + + arm_pm_restart = of_id->data; + + of_node_put(np); +} + +static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91sam9260-sdramc" }, + { .compatible = "atmel,at91sam9g45-ddramc" }, + { /*sentinel*/ } +}; + +static void at91_dt_ramc(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, ramc_ids); + if (!np) + panic("unable to find compatible ram conroller node in dtb\n"); + + at91_ramc_base[0] = of_iomap(np, 0); + if (!at91_ramc_base[0]) + panic("unable to map ramc[0] cpu registers\n"); + /* the controller may have 2 banks */ + at91_ramc_base[1] = of_iomap(np, 1); + + of_node_put(np); +} + +static struct of_device_id shdwc_ids[] = { + { .compatible = "atmel,at91sam9260-shdwc", }, + { .compatible = "atmel,at91sam9rl-shdwc", }, + { .compatible = "atmel,at91sam9x5-shdwc", }, + { /*sentinel*/ } +}; + +static const char *shdwc_wakeup_modes[] = { + [AT91_SHDW_WKMODE0_NONE] = "none", + [AT91_SHDW_WKMODE0_HIGH] = "high", + [AT91_SHDW_WKMODE0_LOW] = "low", + [AT91_SHDW_WKMODE0_ANYLEVEL] = "any", +}; + +const int at91_dtget_shdwc_wakeup_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "atmel,wakeup-mode", &pm); + if (err < 0) + return AT91_SHDW_WKMODE0_ANYLEVEL; + + for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++) + if (!strcasecmp(pm, shdwc_wakeup_modes[i])) + return i; + + return -ENODEV; +} + +static void at91_dt_shdwc(void) +{ + struct device_node *np; + int wakeup_mode; + u32 reg; + u32 mode = 0; + + np = of_find_matching_node(NULL, shdwc_ids); + if (!np) { + pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n"); + return; + } + + at91_shdwc_base = of_iomap(np, 0); + if (!at91_shdwc_base) + panic("AT91: unable to map shdwc cpu registers\n"); + + wakeup_mode = at91_dtget_shdwc_wakeup_mode(np); + if (wakeup_mode < 0) { + pr_warn("AT91: shdwc unknown wakeup mode\n"); + goto end; + } + + if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { + if (reg > AT91_SHDW_CPTWK0_MAX) { + pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n", + reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); + reg = AT91_SHDW_CPTWK0_MAX; + } + mode |= AT91_SHDW_CPTWK0_(reg); + } + + if (of_property_read_bool(np, "atmel,wakeup-rtc-timer")) + mode |= AT91_SHDW_RTCWKEN; + + if (of_property_read_bool(np, "atmel,wakeup-rtt-timer")) + mode |= AT91_SHDW_RTTWKEN; + + at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode); + +end: + pm_power_off = at91sam9_poweroff; + + of_node_put(np); +} + +void __init at91_dt_initialize(void) +{ + at91_dt_rstc(); + at91_dt_ramc(); + at91_dt_shdwc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} +#endif + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h deleted file mode 100644 index dae5e9b166ea..000000000000 --- a/arch/arm/mach-bcmring/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <mach/hardware.h> - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 8736c1acc166..3c5b5bbf24e5 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -37,6 +37,7 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/clps7111.h> +#include <asm/system_misc.h> /* * This maps the generic CLPS711x registers diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 0bea1454ae03..4372f06c9929 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -21,6 +21,7 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/bug.h> #include <mach/hardware.h> #include <asm/page.h> diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h deleted file mode 100644 index 2e0b3ced8f07..000000000000 --- a/arch/arm/mach-clps711x/include/mach/io.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -/* - * We don't support ins[lb]/outs[lb]. Make them fault. - */ -#define __raw_readsb(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_readsl(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_writesb(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_writesl(p,d,l) do { *(int *)0 = 0; } while (0) - -#endif diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h index 7164310dea7c..35ed731b9f16 100644 --- a/arch/arm/mach-clps711x/include/mach/uncompress.h +++ b/arch/arm/mach-clps711x/include/mach/uncompress.h @@ -17,7 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <mach/io.h> #include <mach/hardware.h> #include <asm/hardware/clps7111.h> diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c index 15121446efc8..dd9a6cdbeb02 100644 --- a/arch/arm/mach-clps711x/p720t-leds.c +++ b/arch/arm/mach-clps711x/p720t-leds.c @@ -25,7 +25,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <asm/hardware/clps7111.h> diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 941a308e1253..031805b1428d 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -72,13 +72,13 @@ void __init cns3xxx_map_io(void) /* used by entry-macro.S */ void __init cns3xxx_init_irq(void) { - gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), - __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT)); + gic_init(0, 29, IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), + IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT)); } void cns3xxx_power_off(void) { - u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT); + u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT); u32 clkctrl; printk(KERN_INFO "powering system down...\n"); @@ -237,7 +237,7 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq) static void __init cns3xxx_timer_init(void) { - cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT); + cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT); __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0); } diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c index 79d1fb02c23f..1e40c99b015f 100644 --- a/arch/arm/mach-cns3xxx/devices.c +++ b/arch/arm/mach-cns3xxx/devices.c @@ -98,7 +98,7 @@ static struct platform_device cns3xxx_sdhci_pdev = { void __init cns3xxx_sdhci_init(void) { - u32 __iomem *gpioa = __io(CNS3XXX_MISC_BASE_VIRT + 0x0014); + u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014); u32 gpioa_pins = __raw_readl(gpioa); /* MMC/SD pins share with GPIOA */ diff --git a/arch/arm/mach-cns3xxx/include/mach/io.h b/arch/arm/mach-cns3xxx/include/mach/io.h deleted file mode 100644 index 33b6fc1ece7c..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/io.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2008 Cavium Networks - * Copyright 2003 ARM Limited - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index d5088900af6c..a70de24d1cbc 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -36,6 +36,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 864f676eccac..3683306e0245 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -613,6 +613,113 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* venc standard timings */ +static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .timings = {V4L2_STD_525_60}, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .timings = {V4L2_STD_625_50}, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7e, + .upper_margin = 0x16, + }, +}; + +/* venc dv preset timings */ +static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { + { + .name = "480p59_94", + .timings_type = VPBE_ENC_DV_PRESET, + .timings = {V4L2_DV_480P59_94}, + .interlaced = 0, + .xres = 720, + .yres = 480, + .aspect = {1, 1}, + .fps = {5994, 100}, + .left_margin = 0x80, + .upper_margin = 0x20, + }, + { + .name = "576p50", + .timings_type = VPBE_ENC_DV_PRESET, + .timings = {V4L2_DV_576P50}, + .interlaced = 0, + .xres = 720, + .yres = 576, + .aspect = {1, 1}, + .fps = {50, 1}, + .left_margin = 0x7e, + .upper_margin = 0x30, + }, +}; + +/* + * The outputs available from VPBE + encoders. Keep the order same + * as that of encoders. First those from venc followed by that from + * encoders. Index in the output refers to index on a particular encoder. + * Driver uses this index to pass it to encoder when it supports more + * than one output. Userspace applications use index of the array to + * set an output. + */ +static struct vpbe_output dm644xevm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing), + .modes = dm644xevm_enc_std_timing, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_PRESETS, + }, + .subdev_name = VPBE_VENC_SUBDEV_NAME, + .default_mode = "480p59_94", + .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing), + .modes = dm644xevm_enc_preset_timing, + }, +}; + +static struct vpbe_config dm644xevm_display_cfg = { + .module_name = "dm644x-vpbe-display", + .i2c_adapter_id = 1, + .osd = { + .module_name = VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs), + .outputs = dm644xevm_vpbe_outputs, +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &davinci_fb_device, &rtc_dev, @@ -696,7 +803,7 @@ static __init void davinci_evm_init(void) evm_init_i2c(); davinci_setup_mmc(0, &dm6446evm_mmc_config); - dm644x_init_video(&dm644xevm_capture_cfg); + dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index a30c7c5a6d83..9107691adbdb 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include <linux/export.h> #include <asm/proc-fns.h> +#include <asm/cpuidle.h> #include <mach/cpuidle.h> #include <mach/ddr2.h> @@ -30,12 +31,43 @@ struct davinci_ops { u32 flags; }; +/* Actual code that puts the SoC in different idle states */ +static int davinci_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct davinci_ops *ops = cpuidle_get_statedata(state_usage); + + if (ops && ops->enter) + ops->enter(ops->flags); + + index = cpuidle_wrap_enter(dev, drv, index, + arm_cpuidle_simple_enter); + + if (ops && ops->exit) + ops->exit(ops->flags); + + return index; +} + /* fields in davinci_ops.flags */ #define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) static struct cpuidle_driver davinci_idle_driver = { - .name = "cpuidle-davinci", - .owner = THIS_MODULE, + .name = "cpuidle-davinci", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = davinci_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "DDR SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = DAVINCI_CPUIDLE_MAX_STATES, }; static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); @@ -77,41 +109,10 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { }, }; -/* Actual code that puts the SoC in different idle states */ -static int davinci_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; - struct davinci_ops *ops = cpuidle_get_statedata(state_usage); - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - - if (ops && ops->enter) - ops->enter(ops->flags); - /* Wait for interrupt state */ - cpu_do_idle(); - if (ops && ops->exit) - ops->exit(ops->flags); - - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - dev->last_residency = idle_time; - - return index; -} - static int __init davinci_cpuidle_probe(struct platform_device *pdev) { int ret; struct cpuidle_device *device; - struct cpuidle_driver *driver = &davinci_idle_driver; struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); @@ -123,27 +124,11 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_reg_base = pdata->ddr2_ctlr_base; - /* Wait for interrupt state */ - driver->states[0].enter = davinci_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and DDR self refresh state */ - driver->states[1].enter = davinci_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "DDR SR"); - strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); if (pdata->ddr2_pdown) davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]); device->state_count = DAVINCI_CPUIDLE_MAX_STATES; - driver->state_count = DAVINCI_CPUIDLE_MAX_STATES; ret = cpuidle_register_driver(&davinci_idle_driver); if (ret) { diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 9d708034b57f..3e519dad5bb9 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -29,9 +29,15 @@ #include <media/davinci/vpfe_capture.h> #include <media/davinci/vpif_types.h> +#include <media/davinci/vpss.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe.h> +#include <media/davinci/vpbe_osd.h> #define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 #define SYSMOD_VIDCLKCTL 0x38 +#define SYSMOD_VPSS_CLKCTL 0x44 #define SYSMOD_VDD3P3VPWDN 0x48 #define SYSMOD_VSCLKDIS 0x6c #define SYSMOD_PUPDCTL1 0x7c @@ -83,7 +89,7 @@ void dm365_set_vpfe_config(struct vpfe_config *cfg); /* DM644x function declarations */ void __init dm644x_init(void); void __init dm644x_init_asp(struct snd_platform_data *pdata); -int __init dm644x_init_video(struct vpfe_config *); +int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *); /* DM646x function declarations */ void __init dm646x_init(void); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 23e81cafba8d..c8b866657fcb 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -627,7 +627,7 @@ static struct resource dm644x_vpfe_resources[] = { }, }; -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32); static struct resource dm644x_ccdc_resource[] = { /* CCDC Base address */ { @@ -643,7 +643,7 @@ static struct platform_device dm644x_ccdc_dev = { .num_resources = ARRAY_SIZE(dm644x_ccdc_resource), .resource = dm644x_ccdc_resource, .dev = { - .dma_mask = &vpfe_capture_dma_mask, + .dma_mask = &dm644x_video_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; @@ -654,7 +654,134 @@ static struct platform_device dm644x_vpfe_dev = { .num_resources = ARRAY_SIZE(dm644x_vpfe_resources), .resource = dm644x_vpfe_resources, .dev = { - .dma_mask = &vpfe_capture_dma_mask, + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#define DM644X_OSD_BASE 0x01c72600 + +static struct resource dm644x_osd_resources[] = { + { + .start = DM644X_OSD_BASE, + .end = DM644X_OSD_BASE + 0x1ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct osd_platform_data dm644x_osd_data = { + .vpbe_type = VPBE_VERSION_1, +}; + +static struct platform_device dm644x_osd_dev = { + .name = VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_osd_resources), + .resource = dm644x_osd_resources, + .dev = { + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dm644x_osd_data, + }, +}; + +#define DM644X_VENC_BASE 0x01c72400 + +static struct resource dm644x_venc_resources[] = { + { + .start = DM644X_VENC_BASE, + .end = DM644X_VENC_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, +}; + +#define DM644X_VPSS_MUXSEL_PLL2_MODE BIT(0) +#define DM644X_VPSS_MUXSEL_VPBECLK_MODE BIT(1) +#define DM644X_VPSS_VENCLKEN BIT(3) +#define DM644X_VPSS_DACCLKEN BIT(4) + +static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int mode) +{ + int ret = 0; + u32 v = DM644X_VPSS_VENCLKEN; + + switch (type) { + case VPBE_ENC_STD: + v |= DM644X_VPSS_DACCLKEN; + writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); + break; + case VPBE_ENC_DV_PRESET: + switch (mode) { + case V4L2_DV_480P59_94: + case V4L2_DV_576P50: + v |= DM644X_VPSS_MUXSEL_PLL2_MODE | + DM644X_VPSS_DACCLKEN; + writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); + break; + case V4L2_DV_720P60: + case V4L2_DV_1080I60: + case V4L2_DV_1080P30: + /* + * For HD, use external clock source since + * HD requires higher clock rate + */ + v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE; + writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); + break; + default: + ret = -EINVAL; + break; + } + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static struct resource dm644x_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_v4l2_disp_resources), + .resource = dm644x_v4l2_disp_resources, + .dev = { + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct venc_platform_data dm644x_venc_pdata = { + .venc_type = VPBE_VERSION_1, + .setup_clock = dm644x_venc_setup_clock, +}; + +static struct platform_device dm644x_venc_dev = { + .name = VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_venc_resources), + .resource = dm644x_venc_resources, + .dev = { + .dma_mask = &dm644x_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dm644x_venc_pdata, + }, +}; + +static struct platform_device dm644x_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &dm644x_video_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; @@ -786,17 +913,30 @@ void __init dm644x_init(void) davinci_map_sysmod(); } -int __init dm644x_init_video(struct vpfe_config *vpfe_cfg) +int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) { - dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; - - /* Add ccdc clock aliases */ - clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL); - clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL); - - platform_device_register(&dm644x_vpss_device); - platform_device_register(&dm644x_ccdc_dev); - platform_device_register(&dm644x_vpfe_dev); + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm644x_vpss_device); + + if (vpfe_cfg) { + dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm644x_ccdc_dev); + platform_device_register(&dm644x_vpfe_dev); + /* Add ccdc clock aliases */ + clk_add_alias("master", dm644x_ccdc_dev.name, + "vpss_master", NULL); + clk_add_alias("slave", dm644x_ccdc_dev.name, + "vpss_slave", NULL); + } + + if (vpbe_cfg) { + dm644x_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm644x_osd_dev); + platform_device_register(&dm644x_venc_dev); + platform_device_register(&dm644x_vpbe_dev); + platform_device_register(&dm644x_vpbe_display); + } return 0; } diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index c1661d2feca9..768b3c060214 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <mach/io.h> #include <mach/irqs.h> .macro get_irqnr_preamble, base, tmp diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 0209b1fc22a1..2184691ebc2f 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -30,10 +30,4 @@ #define __IO_ADDRESS(x) ((x) + IO_OFFSET) #define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) -#ifdef __ASSEMBLER__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h deleted file mode 100644 index b2267d1e1a71..000000000000 --- a/arch/arm/mach-davinci/include/mach/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * DaVinci IO address definitions - * - * Copied from include/asm/arm/arch-omap/io.h - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) - -#endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 9dc7cf9664fe..da2fb2c2155a 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -25,6 +25,8 @@ #include <mach/serial.h> +#define IOMEM(x) ((void __force __iomem *)(x)) + u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index e1969ce904dc..75da315b6587 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -19,11 +19,14 @@ #include <linux/err.h> #include <linux/platform_device.h> -#include <mach/hardware.h> +#include <asm/sched_clock.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> + #include <mach/cputype.h> +#include <mach/hardware.h> #include <mach/time.h> + #include "clock.h" static struct clock_event_device clockevent_davinci; @@ -272,19 +275,9 @@ static cycle_t read_cycles(struct clocksource *cs) return (cycles_t)timer32_read(t); } -/* - * Kernel assumes that sched_clock can be called early but may not have - * things ready yet. - */ -static cycle_t read_dummy(struct clocksource *cs) -{ - return 0; -} - - static struct clocksource clocksource_davinci = { .rating = 300, - .read = read_dummy, + .read = read_cycles, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -292,12 +285,9 @@ static struct clocksource clocksource_davinci = { /* * Overwrite weak default sched_clock with something more precise */ -unsigned long long notrace sched_clock(void) +static u32 notrace davinci_read_sched_clock(void) { - const cycle_t cyc = clocksource_davinci.read(&clocksource_davinci); - - return clocksource_cyc2ns(cyc, clocksource_davinci.mult, - clocksource_davinci.shift); + return timer32_read(&timers[TID_CLOCKSOURCE]); } /* @@ -397,12 +387,14 @@ static void __init davinci_timer_init(void) davinci_clock_tick_rate = clk_get_rate(timer_clk); /* setup clocksource */ - clocksource_davinci.read = read_cycles; clocksource_davinci.name = id_to_name[clocksource_id]; if (clocksource_register_hz(&clocksource_davinci, davinci_clock_tick_rate)) printk(err, clocksource_davinci.name); + setup_sched_clock(davinci_read_sched_clock, 32, + davinci_clock_tick_rate); + /* setup clockevent */ clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c index 98b8c83b09ab..2a06c0163418 100644 --- a/arch/arm/mach-dove/addr-map.c +++ b/arch/arm/mach-dove/addr-map.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <asm/mach/arch.h> #include <asm/setup.h> +#include <mach/dove.h> #include <plat/addr-map.h> #include "common.h" diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h index eb4936ff90ad..29c8b85355a5 100644 --- a/arch/arm/mach-dove/include/mach/io.h +++ b/arch/arm/mach-dove/include/mach/io.h @@ -15,6 +15,5 @@ #define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \ DOVE_PCIE0_IO_VIRT_BASE)) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 804c9122b7b3..6f8068692edf 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -22,7 +22,7 @@ #include <asm/mach-types.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -30,10 +30,7 @@ #include <asm/mach/time.h> -#define IRQ_MASK 0xfe000000 /* read */ -#define IRQ_MSET 0xfe000000 /* write */ -#define IRQ_STAT 0xff000000 /* read */ -#define IRQ_MCLR 0xff000000 /* write */ +#include "core.h" static void ebsa110_mask_irq(struct irq_data *d) { @@ -79,22 +76,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = { { /* IRQ_STAT/IRQ_MCLR */ .virtual = IRQ_STAT, .pfn = __phys_to_pfn(TRICK4_PHYS), - .length = PGDIR_SIZE, + .length = TRICK4_SIZE, .type = MT_DEVICE }, { /* IRQ_MASK/IRQ_MSET */ .virtual = IRQ_MASK, .pfn = __phys_to_pfn(TRICK3_PHYS), - .length = PGDIR_SIZE, + .length = TRICK3_SIZE, .type = MT_DEVICE }, { /* SOFT_BASE */ .virtual = SOFT_BASE, .pfn = __phys_to_pfn(TRICK1_PHYS), - .length = PGDIR_SIZE, + .length = TRICK1_SIZE, .type = MT_DEVICE }, { /* PIT_BASE */ .virtual = PIT_BASE, .pfn = __phys_to_pfn(TRICK0_PHYS), - .length = PGDIR_SIZE, + .length = TRICK0_SIZE, .type = MT_DEVICE }, @@ -119,6 +116,20 @@ static void __init ebsa110_map_io(void) iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc)); } +static void __iomem *ebsa110_ioremap_caller(unsigned long cookie, size_t size, + unsigned int flags, void *caller) +{ + return (void __iomem *)cookie; +} + +static void ebsa110_iounmap(volatile void __iomem *io_addr) +{} + +static void __init ebsa110_init_early(void) +{ + arch_ioremap_caller = ebsa110_ioremap_caller; + arch_iounmap = ebsa110_iounmap; +} #define PIT_CTRL (PIT_BASE + 0x0d) #define PIT_T2 (PIT_BASE + 0x09) @@ -315,6 +326,7 @@ MACHINE_START(EBSA110, "EBSA110") .reserve_lp2 = 1, .restart_mode = 's', .map_io = ebsa110_map_io, + .init_early = ebsa110_init_early, .init_irq = ebsa110_init_irq, .timer = &ebsa110_timer, .restart = ebsa110_restart, diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h new file mode 100644 index 000000000000..c93c9e43012d --- /dev/null +++ b/arch/arm/mach-ebsa110/core.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 1996-2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains the core hardware definitions of the EBSA-110. + */ +#ifndef CORE_H +#define CORE_H + +/* Physical addresses/sizes */ +#define ISAMEM_PHYS 0xe0000000 +#define ISAMEM_SIZE 0x10000000 + +#define ISAIO_PHYS 0xf0000000 +#define ISAIO_SIZE PGDIR_SIZE + +#define TRICK0_PHYS 0xf2000000 +#define TRICK0_SIZE PGDIR_SIZE +#define TRICK1_PHYS 0xf2400000 +#define TRICK1_SIZE PGDIR_SIZE +#define TRICK2_PHYS 0xf2800000 +#define TRICK3_PHYS 0xf2c00000 +#define TRICK3_SIZE PGDIR_SIZE +#define TRICK4_PHYS 0xf3000000 +#define TRICK4_SIZE PGDIR_SIZE +#define TRICK5_PHYS 0xf3400000 +#define TRICK6_PHYS 0xf3800000 +#define TRICK7_PHYS 0xf3c00000 + +/* Virtual addresses */ +#define PIT_BASE 0xfc000000 /* trick 0 */ +#define SOFT_BASE 0xfd000000 /* trick 1 */ +#define IRQ_MASK 0xfe000000 /* trick 3 - read */ +#define IRQ_MSET 0xfe000000 /* trick 3 - write */ +#define IRQ_STAT 0xff000000 /* trick 4 - read */ +#define IRQ_MCLR 0xff000000 /* trick 4 - write */ + +#endif diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h index 4b2fb7743909..f4e5407bd004 100644 --- a/arch/arm/mach-ebsa110/include/mach/hardware.h +++ b/arch/arm/mach-ebsa110/include/mach/hardware.h @@ -12,48 +12,9 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -/* - * The EBSA110 has a weird "ISA IO" region: - * - * Region 0 (addr = 0xf0000000 + io << 2) - * -------------------------------------------------------- - * Physical region IO region - * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 - * f0000e60 - f0000e64 398 - 399 - * f0000de0 - f0000dfc 378 - 37f lp0 - * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 - * - * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) - * -------------------------------------------------------- - * Physical region IO region - * f00014f1 a79 pnp write data - * f00007c0 - f00007c1 3e0 - 3e1 pcmcia - * f00004f1 279 pnp address - * f0000440 - f000046c 220 - 236 eth0 - * f0000405 203 pnp read data - */ - -#define ISAMEM_PHYS 0xe0000000 -#define ISAMEM_SIZE 0x10000000 - -#define ISAIO_PHYS 0xf0000000 -#define ISAIO_SIZE PGDIR_SIZE - -#define TRICK0_PHYS 0xf2000000 -#define TRICK1_PHYS 0xf2400000 -#define TRICK2_PHYS 0xf2800000 -#define TRICK3_PHYS 0xf2c00000 -#define TRICK4_PHYS 0xf3000000 -#define TRICK5_PHYS 0xf3400000 -#define TRICK6_PHYS 0xf3800000 -#define TRICK7_PHYS 0xf3c00000 - #define ISAMEM_BASE 0xe0000000 #define ISAIO_BASE 0xf0000000 -#define PIT_BASE 0xfc000000 -#define SOFT_BASE 0xfd000000 - /* * RAM definitions */ diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h index 44679db672fb..11bb0799424b 100644 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ b/arch/arm/mach-ebsa110/include/mach/io.h @@ -62,15 +62,6 @@ void __writel(u32 val, void __iomem *addr); #define writew(v,b) __writew(v,b) #define writel(v,b) __writel(v,b) -static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size, - unsigned int flags) -{ - return (void __iomem *)cookie; -} - -#define __arch_ioremap __arch_ioremap -#define __arch_iounmap(cookie) do { } while (0) - extern void insb(unsigned int port, void *buf, int sz); extern void insw(unsigned int port, void *buf, int sz); extern void insl(unsigned int port, void *buf, int sz); diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c index c52e3047a7eb..756cc377a73d 100644 --- a/arch/arm/mach-ebsa110/io.c +++ b/arch/arm/mach-ebsa110/io.c @@ -177,6 +177,26 @@ void writesl(void __iomem *addr, const void *data, int len) } EXPORT_SYMBOL(writesl); +/* + * The EBSA110 has a weird "ISA IO" region: + * + * Region 0 (addr = 0xf0000000 + io << 2) + * -------------------------------------------------------- + * Physical region IO region + * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 + * f0000e60 - f0000e64 398 - 399 + * f0000de0 - f0000dfc 378 - 37f lp0 + * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 + * + * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) + * -------------------------------------------------------- + * Physical region IO region + * f00014f1 a79 pnp write data + * f00007c0 - f00007c1 3e0 - 3e1 pcmcia + * f00004f1 279 pnp address + * f0000440 - f000046c 220 - 236 eth0 + * f0000405 203 pnp read data + */ #define SUPERIO_PORT(p) \ (((p) >> 3) == (0x3f8 >> 3) || \ ((p) >> 3) == (0x2f8 >> 3) || \ diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c index 6a6ea57c2a4e..99e14e362500 100644 --- a/arch/arm/mach-ebsa110/leds.c +++ b/arch/arm/mach-ebsa110/leds.c @@ -17,9 +17,10 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> +#include "core.h" + static spinlock_t leds_lock; static void ebsa110_leds_event(led_event_t ledevt) diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h deleted file mode 100644 index 594b77f21054..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/io.h - */ - -#ifndef __ASM_MACH_IO_H -#define __ASM_MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) __typesafe_io(p) -#define __mem_pci(p) (p) - -/* - * A typesafe __io() variation for variable initialisers - */ -#ifdef __ASSEMBLER__ -#define IOMEM(p) p -#else -#define IOMEM(p) ((void __iomem __force *)(p)) -#endif - -#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 2bf7d6e23989..0491ceef1cda 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -11,18 +11,19 @@ if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" -choice - prompt "EXYNOS System Type" - default ARCH_EXYNOS4 - config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + default y select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems -endchoice +config ARCH_EXYNOS5 + bool "SAMSUNG EXYNOS5" + select HAVE_SMP + help + Samsung EXYNOS5 (Cortex-A15) SoC based systems comment "EXYNOS SoCs" @@ -56,6 +57,13 @@ config SOC_EXYNOS4412 help Enable EXYNOS4412 SoC support +config SOC_EXYNOS5250 + bool "SAMSUNG EXYNOS5250" + default y + depends on ARCH_EXYNOS5 + help + Enable EXYNOS5250 SoC support + config EXYNOS4_MCT bool default y @@ -356,7 +364,7 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif -comment "Flattened Device Tree based board for Exynos4 based SoC" +comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" @@ -370,6 +378,15 @@ config MACH_EXYNOS4_DT Note: This is under development and not all peripherals can be supported with this machine file. +config MACH_EXYNOS5_DT + bool "SAMSUNG EXYNOS5 Machine using device tree" + select SOC_EXYNOS5250 + select USE_OF + select ARM_AMBA + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the EXYNOS4 SoC based board. + if ARCH_EXYNOS4 comment "Configuration for HSMMC 8-bit bus width" diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 9a4c09896509..8631840d1b5e 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,6 +14,7 @@ obj- := obj-$(CONFIG_ARCH_EXYNOS) += common.o obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o +obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o @@ -42,9 +43,11 @@ obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o +obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o # device support +obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o @@ -52,7 +55,7 @@ obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o +obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 200159dcb341..df54c2a92225 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -496,11 +496,6 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 3), }, { - .name = "fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, { .name = "hsmmc", .devname = "s3c-sdhci.0", .parent = &exynos4_clk_aclk_133.clk, @@ -796,6 +791,13 @@ static struct clk exynos4_clk_mdma1 = { .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)), }; +static struct clk exynos4_clk_fimd0 = { + .name = "fimd", + .devname = "exynos4-fb.0", + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 0), +}; + struct clk *exynos4_clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, @@ -1315,6 +1317,7 @@ static struct clk *exynos4_clk_cdev[] = { &exynos4_clk_pdma0, &exynos4_clk_pdma1, &exynos4_clk_mdma1, + &exynos4_clk_fimd0, }; static struct clksrc_clk *exynos4_clksrc_cdev[] = { @@ -1341,6 +1344,7 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c new file mode 100644 index 000000000000..d013982d0f8e --- /dev/null +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -0,0 +1,1247 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Clock support for EXYNOS5 SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/pm.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/sysmmu.h> + +#include "common.h" + +#ifdef CONFIG_PM_SLEEP +static struct sleep_save exynos5_clock_save[] = { + /* will be implemented */ +}; +#endif + +static struct clk exynos5_clk_sclk_dptxphy = { + .name = "sclk_dptx", +}; + +static struct clk exynos5_clk_sclk_hdmi24m = { + .name = "sclk_hdmi24m", + .rate = 24000000, +}; + +static struct clk exynos5_clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", + .rate = 27000000, +}; + +static struct clk exynos5_clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", +}; + +static struct clk exynos5_clk_sclk_usbphy = { + .name = "sclk_usbphy", + .rate = 48000000, +}; + +static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable); +} + +static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable); +} + +static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable); +} + +static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable); +} + +static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); +} + +static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable); +} + +static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable); +} + +static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable); +} + +static int exynos5_clk_block_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable); +} + +static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable); +} + +static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable); +} + +static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable); +} + +static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable); +} + +static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable); +} + +/* Core list of CMU_CPU side */ + +static struct clksrc_clk exynos5_clk_mout_apll = { + .clk = { + .name = "mout_apll", + }, + .sources = &clk_src_apll, + .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_apll = { + .clk = { + .name = "sclk_apll", + .parent = &exynos5_clk_mout_apll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_mout_bpll = { + .clk = { + .name = "mout_bpll", + }, + .sources = &clk_src_bpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos5_clk_src_bpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &exynos5_clk_mout_bpll.clk, +}; + +static struct clksrc_sources exynos5_clk_src_bpll_user = { + .sources = exynos5_clk_src_bpll_user_list, + .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list), +}; + +static struct clksrc_clk exynos5_clk_mout_bpll_user = { + .clk = { + .name = "mout_bpll_user", + }, + .sources = &exynos5_clk_src_bpll_user, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_mout_cpll = { + .clk = { + .name = "mout_cpll", + }, + .sources = &clk_src_cpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_mout_epll = { + .clk = { + .name = "mout_epll", + }, + .sources = &clk_src_epll, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 }, +}; + +struct clksrc_clk exynos5_clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 }, +}; + +static struct clk *exynos_clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &exynos5_clk_sclk_hdmi27m, +}; + +static struct clksrc_sources exynos5_clkset_vpllsrc = { + .sources = exynos_clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list), +}; + +static struct clksrc_clk exynos5_clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .enable = exynos5_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_vpllsrc, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 }, +}; + +static struct clk *exynos5_clkset_sclk_vpll_list[] = { + [0] = &exynos5_clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources exynos5_clkset_sclk_vpll = { + .sources = exynos5_clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list), +}; + +static struct clksrc_clk exynos5_clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + }, + .sources = &exynos5_clkset_sclk_vpll, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", + .parent = &exynos5_clk_sclk_vpll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 }, +}; + +static struct clk *exynos5_clkset_sclk_hdmi_list[] = { + [0] = &exynos5_clk_sclk_pixel.clk, + [1] = &exynos5_clk_sclk_hdmiphy, +}; + +static struct clksrc_sources exynos5_clkset_sclk_hdmi = { + .sources = exynos5_clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk exynos5_clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", + .enable = exynos5_clksrc_mask_disp1_0_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos5_clkset_sclk_hdmi, + .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 }, +}; + +static struct clksrc_clk *exynos5_sclk_tv[] = { + &exynos5_clk_sclk_pixel, + &exynos5_clk_sclk_hdmi, +}; + +static struct clk *exynos5_clk_src_mpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &exynos5_clk_mout_mpll.clk, +}; + +static struct clksrc_sources exynos5_clk_src_mpll_user = { + .sources = exynos5_clk_src_mpll_user_list, + .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list), +}; + +static struct clksrc_clk exynos5_clk_mout_mpll_user = { + .clk = { + .name = "mout_mpll_user", + }, + .sources = &exynos5_clk_src_mpll_user, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 }, +}; + +static struct clk *exynos5_clkset_mout_cpu_list[] = { + [0] = &exynos5_clk_mout_apll.clk, + [1] = &exynos5_clk_mout_mpll.clk, +}; + +static struct clksrc_sources exynos5_clkset_mout_cpu = { + .sources = exynos5_clkset_mout_cpu_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list), +}; + +static struct clksrc_clk exynos5_clk_mout_cpu = { + .clk = { + .name = "mout_cpu", + }, + .sources = &exynos5_clkset_mout_cpu, + .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk exynos5_clk_dout_armclk = { + .clk = { + .name = "dout_armclk", + .parent = &exynos5_clk_mout_cpu.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_dout_arm2clk = { + .clk = { + .name = "dout_arm2clk", + .parent = &exynos5_clk_dout_armclk.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 }, +}; + +static struct clk exynos5_clk_armclk = { + .name = "armclk", + .parent = &exynos5_clk_dout_arm2clk.clk, +}; + +/* Core list of CMU_CDREX side */ + +static struct clk *exynos5_clkset_cdrex_list[] = { + [0] = &exynos5_clk_mout_mpll.clk, + [1] = &exynos5_clk_mout_bpll.clk, +}; + +static struct clksrc_sources exynos5_clkset_cdrex = { + .sources = exynos5_clkset_cdrex_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list), +}; + +static struct clksrc_clk exynos5_clk_cdrex = { + .clk = { + .name = "clk_cdrex", + }, + .sources = &exynos5_clkset_cdrex, + .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_acp = { + .clk = { + .name = "aclk_acp", + .parent = &exynos5_clk_mout_mpll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_pclk_acp = { + .clk = { + .name = "pclk_acp", + .parent = &exynos5_clk_aclk_acp.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 }, +}; + +/* Core list of CMU_TOP side */ + +struct clk *exynos5_clkset_aclk_top_list[] = { + [0] = &exynos5_clk_mout_mpll_user.clk, + [1] = &exynos5_clk_mout_bpll_user.clk, +}; + +struct clksrc_sources exynos5_clkset_aclk = { + .sources = exynos5_clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), +}; + +static struct clksrc_clk exynos5_clk_aclk_400 = { + .clk = { + .name = "aclk_400", + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, +}; + +struct clk *exynos5_clkset_aclk_333_166_list[] = { + [0] = &exynos5_clk_mout_cpll.clk, + [1] = &exynos5_clk_mout_mpll_user.clk, +}; + +struct clksrc_sources exynos5_clkset_aclk_333_166 = { + .sources = exynos5_clkset_aclk_333_166_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), +}; + +static struct clksrc_clk exynos5_clk_aclk_333 = { + .clk = { + .name = "aclk_333", + }, + .sources = &exynos5_clkset_aclk_333_166, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_166 = { + .clk = { + .name = "aclk_166", + }, + .sources = &exynos5_clkset_aclk_333_166, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_266 = { + .clk = { + .name = "aclk_266", + .parent = &exynos5_clk_mout_mpll_user.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_200 = { + .clk = { + .name = "aclk_200", + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_66_pre = { + .clk = { + .name = "aclk_66_pre", + .parent = &exynos5_clk_mout_mpll_user.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk exynos5_clk_aclk_66 = { + .clk = { + .name = "aclk_66", + .parent = &exynos5_clk_aclk_66_pre.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 }, +}; + +static struct clk exynos5_init_clocks_off[] = { + { + .name = "timers", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 24), + }, { + .name = "rtc", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peris_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "hsmmc", + .devname = "s3c-sdhci.3", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "dwmci", + .parent = &exynos5_clk_aclk_200.clk, + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "sata", + .devname = "ahci", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "sata_phy", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 24), + }, { + .name = "sata_phy_i2c", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "mfc", + .devname = "s5p-mfc", + .enable = exynos5_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hdmi", + .devname = "exynos4-hdmi", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "jpeg", + .enable = exynos5_clk_ip_gen_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "dsim0", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "iis", + .devname = "samsung-i2s.1", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "iis", + .devname = "samsung-i2s.2", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "pcm", + .devname = "samsung-pcm.1", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "pcm", + .devname = "samsung-pcm.2", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "spdif", + .devname = "samsung-spdif", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "ac97", + .devname = "samsung-ac97", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "usbhost", + .enable = exynos5_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 18), + }, { + .name = "usbotg", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "gps", + .enable = exynos5_clk_ip_gps_ctrl, + .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)), + }, { + .name = "nfcon", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "iop", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)), + }, { + .name = "core_iop", + .enable = exynos5_clk_ip_core_ctrl, + .ctrlbit = ((1 << 21) | (1 << 3)), + }, { + .name = "mcu_iop", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.0", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.1", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.2", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.3", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.4", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.5", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.6", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .devname = "s3c2440-i2c.7", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 14), + } +}; + +static struct clk exynos5_init_clocks_on[] = { + { + .name = "uart", + .devname = "s5pv210-uart.0", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "uart", + .devname = "s5pv210-uart.1", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .devname = "s5pv210-uart.2", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .devname = "s5pv210-uart.3", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .devname = "s5pv210-uart.4", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "uart", + .devname = "s5pv210-uart.5", + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 5), + } +}; + +static struct clk exynos5_clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk exynos5_clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos5_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + +static struct clk exynos5_clk_mdma1 = { + .name = "dma", + .devname = "dma-pl330.2", + .enable = exynos5_clk_ip_gen_ctrl, + .ctrlbit = (1 << 4), +}; + +struct clk *exynos5_clkset_group_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = NULL, + [2] = &exynos5_clk_sclk_hdmi24m, + [3] = &exynos5_clk_sclk_dptxphy, + [4] = &exynos5_clk_sclk_usbphy, + [5] = &exynos5_clk_sclk_hdmiphy, + [6] = &exynos5_clk_mout_mpll_user.clk, + [7] = &exynos5_clk_mout_epll.clk, + [8] = &exynos5_clk_sclk_vpll.clk, + [9] = &exynos5_clk_mout_cpll.clk, +}; + +struct clksrc_sources exynos5_clkset_group = { + .sources = exynos5_clkset_group_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), +}; + +/* Possible clock sources for aclk_266_gscl_sub Mux */ +static struct clk *clk_src_gscl_266_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &exynos5_clk_aclk_266.clk, +}; + +static struct clksrc_sources clk_src_gscl_266 = { + .sources = clk_src_gscl_266_list, + .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list), +}; + +static struct clksrc_clk exynos5_clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos5_clksrc_mask_peric0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .parent = &exynos5_clk_dout_mmc0.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .parent = &exynos5_clk_dout_mmc1.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .parent = &exynos5_clk_dout_mmc2.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .parent = &exynos5_clk_dout_mmc3.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clksrcs[] = { + { + .clk = { + .name = "sclk_dwmci", + .parent = &exynos5_clk_dout_mmc4.clk, + .enable = exynos5_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "s3cfb.1", + .enable = exynos5_clksrc_mask_disp1_0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "aclk_266_gscl", + }, + .sources = &clk_src_gscl_266, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 }, + }, { + .clk = { + .name = "sclk_g3d", + .devname = "mali-t604.0", + .enable = exynos5_clk_block_ctrl, + .ctrlbit = (1 << 1), + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, + }, { + .clk = { + .name = "sclk_gscl_wrap", + .devname = "s5p-mipi-csis.0", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_gscl_wrap", + .devname = "s5p-mipi-csis.1", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam0", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam1", + .enable = exynos5_clksrc_mask_gscl_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_jpeg", + .parent = &exynos5_clk_mout_cpll.clk, + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *exynos5_sysclks[] = { + &exynos5_clk_mout_apll, + &exynos5_clk_sclk_apll, + &exynos5_clk_mout_bpll, + &exynos5_clk_mout_bpll_user, + &exynos5_clk_mout_cpll, + &exynos5_clk_mout_epll, + &exynos5_clk_mout_mpll, + &exynos5_clk_mout_mpll_user, + &exynos5_clk_vpllsrc, + &exynos5_clk_sclk_vpll, + &exynos5_clk_mout_cpu, + &exynos5_clk_dout_armclk, + &exynos5_clk_dout_arm2clk, + &exynos5_clk_cdrex, + &exynos5_clk_aclk_400, + &exynos5_clk_aclk_333, + &exynos5_clk_aclk_266, + &exynos5_clk_aclk_200, + &exynos5_clk_aclk_166, + &exynos5_clk_aclk_66_pre, + &exynos5_clk_aclk_66, + &exynos5_clk_dout_mmc0, + &exynos5_clk_dout_mmc1, + &exynos5_clk_dout_mmc2, + &exynos5_clk_dout_mmc3, + &exynos5_clk_dout_mmc4, + &exynos5_clk_aclk_acp, + &exynos5_clk_pclk_acp, +}; + +static struct clk *exynos5_clk_cdev[] = { + &exynos5_clk_pdma0, + &exynos5_clk_pdma1, + &exynos5_clk_mdma1, +}; + +static struct clksrc_clk *exynos5_clksrc_cdev[] = { + &exynos5_clk_sclk_uart0, + &exynos5_clk_sclk_uart1, + &exynos5_clk_sclk_uart2, + &exynos5_clk_sclk_uart3, + &exynos5_clk_sclk_mmc0, + &exynos5_clk_sclk_mmc1, + &exynos5_clk_sclk_mmc2, + &exynos5_clk_sclk_mmc3, +}; + +static struct clk_lookup exynos5_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), + CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), +}; + +static unsigned long exynos5_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static struct clk *exynos5_clks[] __initdata = { + &exynos5_clk_sclk_hdmi27m, + &exynos5_clk_sclk_hdmiphy, + &clk_fout_bpll, + &clk_fout_cpll, + &exynos5_clk_armclk, +}; + +static u32 epll_div[][6] = { + { 192000000, 0, 48, 3, 1, 0 }, + { 180000000, 0, 45, 3, 1, 0 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 67737600, 1, 90, 4, 3, 20762 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 45158400, 0, 45, 3, 3, 10381 }, + { 180633600, 0, 45, 3, 1, 10381 }, +}; + +static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int tmp; + unsigned int epll_rate; + unsigned int locktime; + unsigned int lockcnt; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + if (clk->parent) + epll_rate = clk_get_rate(clk->parent); + else + epll_rate = clk_ext_xtal_mux.rate; + + if (epll_rate != 24000000) { + pr_err("Invalid Clock : recommended clock is 24MHz.\n"); + return -EINVAL; + } + + epll_con = __raw_readl(EXYNOS5_EPLL_CON0); + epll_con &= ~(0x1 << 27 | \ + PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ + PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ + PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k = epll_div[i][5] << 0; + epll_con |= epll_div[i][1] << 27; + epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT; + epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT; + epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT; + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", + __func__); + return -EINVAL; + } + + epll_rate /= 1000000; + + /* 3000 max_cycls : specification data */ + locktime = 3000 / epll_rate * epll_div[i][3]; + lockcnt = locktime * 10000 / (10000 / epll_rate); + + __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK); + + __raw_writel(epll_con, EXYNOS5_EPLL_CON0); + __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1); + + do { + tmp = __raw_readl(EXYNOS5_EPLL_CON0); + } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT)); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops exynos5_epll_ops = { + .get_rate = exynos5_epll_get_rate, + .set_rate = exynos5_epll_set_rate, +}; + +static int xtal_rate; + +static unsigned long exynos5_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0)); +} + +static struct clk_ops exynos5_fout_apll_ops = { + .get_rate = exynos5_fout_apll_get_rate, +}; + +#ifdef CONFIG_PM +static int exynos5_clock_suspend(void) +{ + s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); + + return 0; +} + +static void exynos5_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); +} +#else +#define exynos5_clock_suspend NULL +#define exynos5_clock_resume NULL +#endif + +struct syscore_ops exynos5_clock_syscore_ops = { + .suspend = exynos5_clock_suspend, + .resume = exynos5_clock_resume, +}; + +void __init_or_cpufreq exynos5_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long apll; + unsigned long bpll; + unsigned long cpll; + unsigned long mpll; + unsigned long epll; + unsigned long vpll; + unsigned long vpllsrc; + unsigned long xtal; + unsigned long armclk; + unsigned long mout_cdrex; + unsigned long aclk_400; + unsigned long aclk_333; + unsigned long aclk_266; + unsigned long aclk_200; + unsigned long aclk_166; + unsigned long aclk_66; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0)); + bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0)); + cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0), + __raw_readl(EXYNOS5_EPLL_CON1)); + + vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0), + __raw_readl(EXYNOS5_VPLL_CON1)); + + clk_fout_apll.ops = &exynos5_fout_apll_ops; + clk_fout_bpll.rate = bpll; + clk_fout_cpll.rate = cpll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_vpll.rate = vpll; + + printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n" + "M=%ld, E=%ld V=%ld", + apll, bpll, cpll, mpll, epll, vpll); + + armclk = clk_get_rate(&exynos5_clk_armclk); + mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk); + + aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk); + aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk); + aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk); + aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk); + aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk); + aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk); + + printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n" + "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n" + "ACLK166=%ld, ACLK66=%ld\n", + armclk, mout_cdrex, aclk_400, + aclk_333, aclk_266, aclk_200, + aclk_166, aclk_66); + + + clk_fout_epll.ops = &exynos5_epll_ops; + + if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll)) + printk(KERN_ERR "Unable to set parent %s of clock %s.\n", + clk_fout_epll.name, exynos5_clk_mout_epll.clk.name); + + clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000); + clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000); + + clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000); + clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++) + s3c_set_clksrc(&exynos5_clksrcs[ptr], true); +} + +void __init exynos5_register_clocks(void) +{ + int ptr; + + s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++) + s3c_register_clksrc(exynos5_sysclks[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++) + s3c_register_clksrc(exynos5_sclk_tv[ptr], 1); + + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++) + s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1); + + s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs)); + s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on)); + + s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++) + s3c_disable_clocks(exynos5_clk_cdev[ptr], 1); + + s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); + s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); + clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup)); + + register_syscore_ops(&exynos5_clock_syscore_ops); + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 97ca2592ce83..8614aab47cc0 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -53,6 +53,14 @@ static const char name_exynos4210[] = "EXYNOS4210"; static const char name_exynos4212[] = "EXYNOS4212"; static const char name_exynos4412[] = "EXYNOS4412"; +static const char name_exynos5250[] = "EXYNOS5250"; + +static void exynos4_map_io(void); +static void exynos5_map_io(void); +static void exynos4_init_clocks(int xtal); +static void exynos5_init_clocks(int xtal); +static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no); +static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { { @@ -60,7 +68,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, + .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { @@ -68,7 +76,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, + .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { @@ -76,9 +84,17 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, + .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos4412, + }, { + .idcode = EXYNOS5250_SOC_ID, + .idmask = EXYNOS5_SOC_MASK, + .map_io = exynos5_map_io, + .init_clocks = exynos5_init_clocks, + .init_uarts = exynos_init_uarts, + .init = exynos_init, + .name = name_exynos5250, }, }; @@ -87,10 +103,14 @@ static struct cpu_table cpu_ids[] __initdata = { static struct map_desc exynos_iodesc[] __initdata = { { .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID), + .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID), .length = SZ_4K, .type = MT_DEVICE, - }, { + }, +}; + +static struct map_desc exynos4_iodesc[] __initdata = { + { .virtual = (unsigned long)S3C_VA_SYS, .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON), .length = SZ_64K, @@ -140,11 +160,7 @@ static struct map_desc exynos_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS4_PA_UART), .length = SZ_512K, .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc[] __initdata = { - { + }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -160,21 +176,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO1, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO2, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO3, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), - .length = SZ_256, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_DMC0, .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), .length = SZ_64K, @@ -210,11 +211,80 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; +static struct map_desc exynos5_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), + .length = 144 * SZ_1K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(EXYNOS5_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COMBINER_BASE, + .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(EXYNOS5_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); } +void exynos5_restart(char mode, const char *cmd) +{ + __raw_writel(0x1, EXYNOS_SWRESET); +} + /* * exynos_map_io * @@ -234,7 +304,7 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size) s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } -void __init exynos4_map_io(void) +static void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); @@ -265,7 +335,22 @@ void __init exynos4_map_io(void) s5p_hdmi_setname("exynos4-hdmi"); } -void __init exynos4_init_clocks(int xtal) +static void __init exynos5_map_io(void) +{ + iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); + + s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0); + s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1; + s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; + s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); +} + +static void __init exynos4_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -281,6 +366,17 @@ void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void __init exynos5_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + + exynos5_register_clocks(); + exynos5_setup_clocks(); +} + #define COMBINER_ENABLE_SET 0x0 #define COMBINER_ENABLE_CLEAR 0x4 #define COMBINER_INT_STATUS 0xC @@ -354,7 +450,14 @@ static struct irq_chip combiner_chip = { static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) { - if (combiner_nr >= MAX_COMBINER_NR) + unsigned int max_nr; + + if (soc_is_exynos5250()) + max_nr = EXYNOS5_MAX_COMBINER_NR; + else + max_nr = EXYNOS4_MAX_COMBINER_NR; + + if (combiner_nr >= max_nr) BUG(); if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) BUG(); @@ -365,8 +468,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start) { unsigned int i; + unsigned int max_nr; - if (combiner_nr >= MAX_COMBINER_NR) + if (soc_is_exynos5250()) + max_nr = EXYNOS5_MAX_COMBINER_NR; + else + max_nr = EXYNOS4_MAX_COMBINER_NR; + + if (combiner_nr >= max_nr) BUG(); combiner_data[combiner_nr].base = base; @@ -409,7 +518,7 @@ void __init exynos4_init_irq(void) of_irq_init(exynos4_dt_irq_match); #endif - for (irq = 0; irq < MAX_COMBINER_NR; irq++) { + for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), COMBINER_IRQ(irq, 0)); @@ -424,25 +533,61 @@ void __init exynos4_init_irq(void) s5p_init_irq(NULL, 0); } +void __init exynos5_init_irq(void) +{ + int irq; + + gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + + for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { + combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), + COMBINER_IRQ(irq, 0)); + combiner_cascade_irq(irq, IRQ_SPI(irq)); + } + + /* + * The parameters of s5p_init_irq() are for VIC init. + * Theses parameters should be NULL and 0 because EXYNOS4 + * uses GIC instead of VIC. + */ + s5p_init_irq(NULL, 0); +} + struct bus_type exynos4_subsys = { .name = "exynos4-core", .dev_name = "exynos4-core", }; +struct bus_type exynos5_subsys = { + .name = "exynos5-core", + .dev_name = "exynos5-core", +}; + static struct device exynos4_dev = { .bus = &exynos4_subsys, }; -static int __init exynos4_core_init(void) +static struct device exynos5_dev = { + .bus = &exynos5_subsys, +}; + +static int __init exynos_core_init(void) { - return subsys_system_register(&exynos4_subsys, NULL); + if (soc_is_exynos5250()) + return subsys_system_register(&exynos5_subsys, NULL); + else + return subsys_system_register(&exynos4_subsys, NULL); } -core_initcall(exynos4_core_init); +core_initcall(exynos_core_init); #ifdef CONFIG_CACHE_L2X0 static int __init exynos4_l2x0_cache_init(void) { int ret; + + if (soc_is_exynos5250()) + return 0; + ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); if (!ret) { l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); @@ -486,19 +631,47 @@ static int __init exynos4_l2x0_cache_init(void) l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK); return 0; } - early_initcall(exynos4_l2x0_cache_init); #endif -int __init exynos_init(void) +static int __init exynos5_l2_cache_init(void) +{ + unsigned int val; + + if (!soc_is_exynos5250()) + return 0; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #(1 << 2)\n" /* cache disable */ + "mcr p15, 0, %0, c1, c0, 0\n" + "mrc p15, 1, %0, c9, c0, 2\n" + : "=r"(val)); + + val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0); + + asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #(1 << 2)\n" /* cache enable */ + "mcr p15, 0, %0, c1, c0, 0\n" + : : "r"(val)); + + return 0; +} +early_initcall(exynos5_l2_cache_init); + +static int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); - return device_register(&exynos4_dev); + + if (soc_is_exynos5250()) + return device_register(&exynos5_dev); + else + return device_register(&exynos4_dev); } /* uart registration process */ -void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -506,69 +679,138 @@ void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) tcfg->has_fracval = 1; - s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no); + if (soc_is_exynos5250()) + s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no); + else + s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } +static void __iomem *exynos_eint_base; + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; -static unsigned int exynos4_get_irq_nr(unsigned int number) +static inline int exynos4_irq_to_gpio(unsigned int irq) { - u32 ret = 0; + if (irq < IRQ_EINT(0)) + return -EINVAL; - switch (number) { - case 0 ... 3: - ret = (number + IRQ_EINT0); - break; - case 4 ... 7: - ret = (number + (IRQ_EINT4 - 4)); - break; - case 8 ... 15: - ret = (number + (IRQ_EINT8 - 8)); - break; - default: - printk(KERN_ERR "number available : %d\n", number); - } + irq -= IRQ_EINT(0); + if (irq < 8) + return EXYNOS4_GPX0(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS4_GPX1(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS4_GPX2(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS4_GPX3(irq); + + return -EINVAL; +} - return ret; +static inline int exynos5_irq_to_gpio(unsigned int irq) +{ + if (irq < IRQ_EINT(0)) + return -EINVAL; + + irq -= IRQ_EINT(0); + if (irq < 8) + return EXYNOS5_GPX0(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS5_GPX1(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS5_GPX2(irq); + + irq -= 8; + if (irq < 8) + return EXYNOS5_GPX3(irq); + + return -EINVAL; } -static inline void exynos4_irq_eint_mask(struct irq_data *data) +static unsigned int exynos4_eint0_15_src_int[16] = { + EXYNOS4_IRQ_EINT0, + EXYNOS4_IRQ_EINT1, + EXYNOS4_IRQ_EINT2, + EXYNOS4_IRQ_EINT3, + EXYNOS4_IRQ_EINT4, + EXYNOS4_IRQ_EINT5, + EXYNOS4_IRQ_EINT6, + EXYNOS4_IRQ_EINT7, + EXYNOS4_IRQ_EINT8, + EXYNOS4_IRQ_EINT9, + EXYNOS4_IRQ_EINT10, + EXYNOS4_IRQ_EINT11, + EXYNOS4_IRQ_EINT12, + EXYNOS4_IRQ_EINT13, + EXYNOS4_IRQ_EINT14, + EXYNOS4_IRQ_EINT15, +}; + +static unsigned int exynos5_eint0_15_src_int[16] = { + EXYNOS5_IRQ_EINT0, + EXYNOS5_IRQ_EINT1, + EXYNOS5_IRQ_EINT2, + EXYNOS5_IRQ_EINT3, + EXYNOS5_IRQ_EINT4, + EXYNOS5_IRQ_EINT5, + EXYNOS5_IRQ_EINT6, + EXYNOS5_IRQ_EINT7, + EXYNOS5_IRQ_EINT8, + EXYNOS5_IRQ_EINT9, + EXYNOS5_IRQ_EINT10, + EXYNOS5_IRQ_EINT11, + EXYNOS5_IRQ_EINT12, + EXYNOS5_IRQ_EINT13, + EXYNOS5_IRQ_EINT14, + EXYNOS5_IRQ_EINT15, +}; +static inline void exynos_irq_eint_mask(struct irq_data *data) { u32 mask; spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask |= eint_irq_to_bit(data->irq); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); + mask |= EINT_OFFSET_BIT(data->irq); + __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); spin_unlock(&eint_lock); } -static void exynos4_irq_eint_unmask(struct irq_data *data) +static void exynos_irq_eint_unmask(struct irq_data *data) { u32 mask; spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask &= ~(eint_irq_to_bit(data->irq)); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); + mask &= ~(EINT_OFFSET_BIT(data->irq)); + __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); spin_unlock(&eint_lock); } -static inline void exynos4_irq_eint_ack(struct irq_data *data) +static inline void exynos_irq_eint_ack(struct irq_data *data) { - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); + __raw_writel(EINT_OFFSET_BIT(data->irq), + EINT_PEND(exynos_eint_base, data->irq)); } -static void exynos4_irq_eint_maskack(struct irq_data *data) +static void exynos_irq_eint_maskack(struct irq_data *data) { - exynos4_irq_eint_mask(data); - exynos4_irq_eint_ack(data); + exynos_irq_eint_mask(data); + exynos_irq_eint_ack(data); } -static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) +static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type) { int offs = EINT_OFFSET(data->irq); int shift; @@ -605,39 +847,27 @@ static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) mask = 0x7 << shift; spin_lock(&eint_lock); - ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); + ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq)); ctrl &= ~mask; ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); + __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq)); spin_unlock(&eint_lock); - switch (offs) { - case 0 ... 7: - s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); - break; - case 8 ... 15: - s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); - break; - case 16 ... 23: - s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); - break; - case 24 ... 31: - s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); - break; - default: - printk(KERN_ERR "No such irq number %d", offs); - } + if (soc_is_exynos5250()) + s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); + else + s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); return 0; } -static struct irq_chip exynos4_irq_eint = { - .name = "exynos4-eint", - .irq_mask = exynos4_irq_eint_mask, - .irq_unmask = exynos4_irq_eint_unmask, - .irq_mask_ack = exynos4_irq_eint_maskack, - .irq_ack = exynos4_irq_eint_ack, - .irq_set_type = exynos4_irq_eint_set_type, +static struct irq_chip exynos_irq_eint = { + .name = "exynos-eint", + .irq_mask = exynos_irq_eint_mask, + .irq_unmask = exynos_irq_eint_unmask, + .irq_mask_ack = exynos_irq_eint_maskack, + .irq_ack = exynos_irq_eint_ack, + .irq_set_type = exynos_irq_eint_set_type, #ifdef CONFIG_PM .irq_set_wake = s3c_irqext_wake, #endif @@ -652,12 +882,12 @@ static struct irq_chip exynos4_irq_eint = { * * Each EINT pend/mask registers handle eight of them. */ -static inline void exynos4_irq_demux_eint(unsigned int start) +static inline void exynos_irq_demux_eint(unsigned int start) { unsigned int irq; - u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); - u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start)); + u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start)); status &= ~mask; status &= 0xff; @@ -669,16 +899,16 @@ static inline void exynos4_irq_demux_eint(unsigned int start) } } -static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); chained_irq_enter(chip, desc); - exynos4_irq_demux_eint(IRQ_EINT(16)); - exynos4_irq_demux_eint(IRQ_EINT(24)); + exynos_irq_demux_eint(IRQ_EINT(16)); + exynos_irq_demux_eint(IRQ_EINT(24)); chained_irq_exit(chip, desc); } -static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); @@ -695,27 +925,44 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -static int __init exynos4_init_irq_eint(void) +static int __init exynos_init_irq_eint(void) { int irq; + if (soc_is_exynos5250()) + exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); + else + exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K); + + if (exynos_eint_base == NULL) { + pr_err("unable to ioremap for EINT base address\n"); + return -ENOMEM; + } + for (irq = 0 ; irq <= 31 ; irq++) { - irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint, + irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint, handle_level_irq); set_irq_flags(IRQ_EINT(irq), IRQF_VALID); } - irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); + irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31); for (irq = 0 ; irq <= 15 ; irq++) { eint0_15_data[irq] = IRQ_EINT(irq); - irq_set_handler_data(exynos4_get_irq_nr(irq), - &eint0_15_data[irq]); - irq_set_chained_handler(exynos4_get_irq_nr(irq), - exynos4_irq_eint0_15); + if (soc_is_exynos5250()) { + irq_set_handler_data(exynos5_eint0_15_src_int[irq], + &eint0_15_data[irq]); + irq_set_chained_handler(exynos5_eint0_15_src_int[irq], + exynos_irq_eint0_15); + } else { + irq_set_handler_data(exynos4_eint0_15_src_int[irq], + &eint0_15_data[irq]); + irq_set_chained_handler(exynos4_eint0_15_src_int[irq], + exynos_irq_eint0_15); + } } return 0; } -arch_initcall(exynos4_init_irq_eint); +arch_initcall(exynos_init_irq_eint); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 8c1efe692c20..677b5467df18 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,39 +12,44 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H +extern struct sys_timer exynos4_timer; + void exynos_init_io(struct map_desc *mach_desc, int size); void exynos4_init_irq(void); +void exynos5_init_irq(void); +void exynos4_restart(char mode, const char *cmd); +void exynos5_restart(char mode, const char *cmd); #ifdef CONFIG_ARCH_EXYNOS4 void exynos4_register_clocks(void); void exynos4_setup_clocks(void); -void exynos4210_register_clocks(void); -void exynos4212_register_clocks(void); - #else #define exynos4_register_clocks() #define exynos4_setup_clocks() +#endif -#define exynos4210_register_clocks() -#define exynos4212_register_clocks() +#ifdef CONFIG_ARCH_EXYNOS5 +void exynos5_register_clocks(void); +void exynos5_setup_clocks(void); + +#else +#define exynos5_register_clocks() +#define exynos5_setup_clocks() #endif -void exynos4_restart(char mode, const char *cmd); +#ifdef CONFIG_CPU_EXYNOS4210 +void exynos4210_register_clocks(void); -extern struct sys_timer exynos4_timer; +#else +#define exynos4210_register_clocks() +#endif -#ifdef CONFIG_ARCH_EXYNOS -extern int exynos_init(void); -extern void exynos4_map_io(void); -extern void exynos4_init_clocks(int xtal); -extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); +#ifdef CONFIG_SOC_EXYNOS4212 +void exynos4212_register_clocks(void); #else -#define exynos4_init_clocks NULL -#define exynos4_init_uarts NULL -#define exynos4_map_io NULL -#define exynos_init NULL +#define exynos4212_register_clocks() #endif #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c index f57a3de8e1d2..50ce5b0adcf1 100644 --- a/arch/arm/mach-exynos/dev-ahci.c +++ b/arch/arm/mach-exynos/dev-ahci.c @@ -242,8 +242,8 @@ static struct resource exynos4_ahci_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_SATA, - .end = IRQ_SATA, + .start = EXYNOS4_IRQ_SATA, + .end = EXYNOS4_IRQ_SATA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index 5a9f9c2e53bf..7199e1ae79b4 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -304,8 +304,8 @@ static struct resource exynos4_ac97_resource[] = { .flags = IORESOURCE_DMA, }, [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, + .start = EXYNOS4_IRQ_AC97, + .end = EXYNOS4_IRQ_AC97, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c new file mode 100644 index 000000000000..2e85c022fd16 --- /dev/null +++ b/arch/arm/mach-exynos/dev-uart.c @@ -0,0 +1,78 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Base EXYNOS UART resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> + +#define EXYNOS_UART_RESOURCE(_series, _nr) \ +static struct resource exynos##_series##_uart##_nr##_resource[] = { \ + [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \ + [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \ +}; + +EXYNOS_UART_RESOURCE(4, 0) +EXYNOS_UART_RESOURCE(4, 1) +EXYNOS_UART_RESOURCE(4, 2) +EXYNOS_UART_RESOURCE(4, 3) + +struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { + [0] = { + .resources = exynos4_uart0_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart0_resource), + }, + [1] = { + .resources = exynos4_uart1_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart1_resource), + }, + [2] = { + .resources = exynos4_uart2_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart2_resource), + }, + [3] = { + .resources = exynos4_uart3_resource, + .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), + }, +}; + +EXYNOS_UART_RESOURCE(5, 0) +EXYNOS_UART_RESOURCE(5, 1) +EXYNOS_UART_RESOURCE(5, 2) +EXYNOS_UART_RESOURCE(5, 3) + +struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = { + [0] = { + .resources = exynos5_uart0_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), + }, + [1] = { + .resources = exynos5_uart1_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), + }, + [2] = { + .resources = exynos5_uart2_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart2_resource), + }, + [3] = { + .resources = exynos5_uart3_resource, + .nr_resources = ARRAY_SIZE(exynos5_uart3_resource), + }, +}; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 13607c4328b3..69aaa4503205 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -35,8 +35,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 exynos4210_pdma0_peri[] = { DMACH_PCM0_RX, DMACH_PCM0_TX, @@ -108,7 +106,7 @@ static u8 exynos4212_pdma0_peri[] = { struct dma_pl330_platdata exynos4_pdma0_pdata; static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, - EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata); + EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata); static u8 exynos4210_pdma1_peri[] = { DMACH_PCM0_RX, @@ -174,7 +172,7 @@ static u8 exynos4212_pdma1_peri[] = { static struct dma_pl330_platdata exynos4_pdma1_pdata; static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, - EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata); + EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata); static u8 mdma_peri[] = { DMACH_MTOM_0, @@ -193,7 +191,7 @@ static struct dma_pl330_platdata exynos4_mdma1_pdata = { }; static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330, - EXYNOS4_PA_MDMA1, {IRQ_MDMA1}, &exynos4_mdma1_pdata); + EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata); static int __init exynos4_dma_init(void) { diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index dd1ad55524c9..9c17a0a43858 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S index 6cacf16a67a6..e0c86ea475e7 100644 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S @@ -21,8 +21,12 @@ */ .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART + mrc p15, 0, \tmp, c0, c0, 0 + and \tmp, \tmp, #0xf0 + teq \tmp, #0xf0 @@ A15 + ldreq \rp, =EXYNOS5_PA_UART + movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 + ldr \rv, =S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h index 80523ca9bb49..d7498afe036a 100644 --- a/arch/arm/mach-exynos/include/mach/gpio.h +++ b/arch/arm/mach-exynos/include/mach/gpio.h @@ -1,9 +1,8 @@ -/* linux/arch/arm/mach-exynos4/include/mach/gpio.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - GPIO lib support + * EXYNOS - GPIO lib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,9 +12,13 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H __FILE__ -/* Practically, GPIO banks up to GPZ are the configurable gpio banks */ +/* Macro for EXYNOS GPIO numbering */ + +#define EXYNOS_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +/* EXYNOS4 GPIO bank sizes */ -/* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) #define EXYNOS4_GPIO_A1_NR (6) #define EXYNOS4_GPIO_B_NR (8) @@ -54,52 +57,50 @@ #define EXYNOS4_GPIO_Y6_NR (8) #define EXYNOS4_GPIO_Z_NR (7) -/* GPIO bank numbers */ - -#define EXYNOS4_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) +/* EXYNOS4 GPIO bank numbers */ -enum s5p_gpio_number { +enum exynos4_gpio_number { EXYNOS4_GPIO_A0_START = 0, - EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0), - EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1), - EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B), - EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0), - EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1), - EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0), - EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1), - EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0), - EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1), - EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2), - EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3), - EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4), - EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0), - EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1), - EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2), - EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3), - EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0), - EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1), - EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0), - EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1), - EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2), - EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3), - EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0), - EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1), - EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2), - EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0), - EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1), - EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2), - EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3), - EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0), - EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1), - EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2), - EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3), - EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4), - EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5), - EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6), + EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0), + EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1), + EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B), + EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0), + EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1), + EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0), + EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1), + EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0), + EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1), + EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2), + EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3), + EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4), + EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0), + EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1), + EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2), + EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3), + EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0), + EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1), + EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0), + EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1), + EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2), + EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3), + EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0), + EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1), + EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2), + EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0), + EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1), + EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2), + EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3), + EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0), + EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1), + EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2), + EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3), + EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4), + EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5), + EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6), }; /* EXYNOS4 GPIO number definitions */ + #define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) #define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) #define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) @@ -139,11 +140,147 @@ enum s5p_gpio_number { #define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) /* the end of the EXYNOS4 specific gpios */ + #define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) -#define S3C_GPIO_END EXYNOS4_GPIO_END -/* define the number of gpios we need to the one after the GPZ() range */ -#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) +/* EXYNOS5 GPIO bank sizes */ + +#define EXYNOS5_GPIO_A0_NR (8) +#define EXYNOS5_GPIO_A1_NR (6) +#define EXYNOS5_GPIO_A2_NR (8) +#define EXYNOS5_GPIO_B0_NR (5) +#define EXYNOS5_GPIO_B1_NR (5) +#define EXYNOS5_GPIO_B2_NR (4) +#define EXYNOS5_GPIO_B3_NR (4) +#define EXYNOS5_GPIO_C0_NR (7) +#define EXYNOS5_GPIO_C1_NR (7) +#define EXYNOS5_GPIO_C2_NR (7) +#define EXYNOS5_GPIO_C3_NR (7) +#define EXYNOS5_GPIO_D0_NR (8) +#define EXYNOS5_GPIO_D1_NR (8) +#define EXYNOS5_GPIO_Y0_NR (6) +#define EXYNOS5_GPIO_Y1_NR (4) +#define EXYNOS5_GPIO_Y2_NR (6) +#define EXYNOS5_GPIO_Y3_NR (8) +#define EXYNOS5_GPIO_Y4_NR (8) +#define EXYNOS5_GPIO_Y5_NR (8) +#define EXYNOS5_GPIO_Y6_NR (8) +#define EXYNOS5_GPIO_X0_NR (8) +#define EXYNOS5_GPIO_X1_NR (8) +#define EXYNOS5_GPIO_X2_NR (8) +#define EXYNOS5_GPIO_X3_NR (8) +#define EXYNOS5_GPIO_E0_NR (8) +#define EXYNOS5_GPIO_E1_NR (2) +#define EXYNOS5_GPIO_F0_NR (4) +#define EXYNOS5_GPIO_F1_NR (4) +#define EXYNOS5_GPIO_G0_NR (8) +#define EXYNOS5_GPIO_G1_NR (8) +#define EXYNOS5_GPIO_G2_NR (2) +#define EXYNOS5_GPIO_H0_NR (4) +#define EXYNOS5_GPIO_H1_NR (8) +#define EXYNOS5_GPIO_V0_NR (8) +#define EXYNOS5_GPIO_V1_NR (8) +#define EXYNOS5_GPIO_V2_NR (8) +#define EXYNOS5_GPIO_V3_NR (8) +#define EXYNOS5_GPIO_V4_NR (2) +#define EXYNOS5_GPIO_Z_NR (7) + +/* EXYNOS5 GPIO bank numbers */ + +enum exynos5_gpio_number { + EXYNOS5_GPIO_A0_START = 0, + EXYNOS5_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0), + EXYNOS5_GPIO_A2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1), + EXYNOS5_GPIO_B0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2), + EXYNOS5_GPIO_B1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0), + EXYNOS5_GPIO_B2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1), + EXYNOS5_GPIO_B3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2), + EXYNOS5_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3), + EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0), + EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1), + EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2), + EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3), + EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0), + EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1), + EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0), + EXYNOS5_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1), + EXYNOS5_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2), + EXYNOS5_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3), + EXYNOS5_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4), + EXYNOS5_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5), + EXYNOS5_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6), + EXYNOS5_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0), + EXYNOS5_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1), + EXYNOS5_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2), + EXYNOS5_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3), + EXYNOS5_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0), + EXYNOS5_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1), + EXYNOS5_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0), + EXYNOS5_GPIO_G0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1), + EXYNOS5_GPIO_G1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0), + EXYNOS5_GPIO_G2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1), + EXYNOS5_GPIO_H0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2), + EXYNOS5_GPIO_H1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0), + EXYNOS5_GPIO_V0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1), + EXYNOS5_GPIO_V1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0), + EXYNOS5_GPIO_V2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1), + EXYNOS5_GPIO_V3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2), + EXYNOS5_GPIO_V4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3), + EXYNOS5_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4), +}; + +/* EXYNOS5 GPIO number definitions */ + +#define EXYNOS5_GPA0(_nr) (EXYNOS5_GPIO_A0_START + (_nr)) +#define EXYNOS5_GPA1(_nr) (EXYNOS5_GPIO_A1_START + (_nr)) +#define EXYNOS5_GPA2(_nr) (EXYNOS5_GPIO_A2_START + (_nr)) +#define EXYNOS5_GPB0(_nr) (EXYNOS5_GPIO_B0_START + (_nr)) +#define EXYNOS5_GPB1(_nr) (EXYNOS5_GPIO_B1_START + (_nr)) +#define EXYNOS5_GPB2(_nr) (EXYNOS5_GPIO_B2_START + (_nr)) +#define EXYNOS5_GPB3(_nr) (EXYNOS5_GPIO_B3_START + (_nr)) +#define EXYNOS5_GPC0(_nr) (EXYNOS5_GPIO_C0_START + (_nr)) +#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr)) +#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr)) +#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr)) +#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr)) +#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr)) +#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr)) +#define EXYNOS5_GPY1(_nr) (EXYNOS5_GPIO_Y1_START + (_nr)) +#define EXYNOS5_GPY2(_nr) (EXYNOS5_GPIO_Y2_START + (_nr)) +#define EXYNOS5_GPY3(_nr) (EXYNOS5_GPIO_Y3_START + (_nr)) +#define EXYNOS5_GPY4(_nr) (EXYNOS5_GPIO_Y4_START + (_nr)) +#define EXYNOS5_GPY5(_nr) (EXYNOS5_GPIO_Y5_START + (_nr)) +#define EXYNOS5_GPY6(_nr) (EXYNOS5_GPIO_Y6_START + (_nr)) +#define EXYNOS5_GPX0(_nr) (EXYNOS5_GPIO_X0_START + (_nr)) +#define EXYNOS5_GPX1(_nr) (EXYNOS5_GPIO_X1_START + (_nr)) +#define EXYNOS5_GPX2(_nr) (EXYNOS5_GPIO_X2_START + (_nr)) +#define EXYNOS5_GPX3(_nr) (EXYNOS5_GPIO_X3_START + (_nr)) +#define EXYNOS5_GPE0(_nr) (EXYNOS5_GPIO_E0_START + (_nr)) +#define EXYNOS5_GPE1(_nr) (EXYNOS5_GPIO_E1_START + (_nr)) +#define EXYNOS5_GPF0(_nr) (EXYNOS5_GPIO_F0_START + (_nr)) +#define EXYNOS5_GPF1(_nr) (EXYNOS5_GPIO_F1_START + (_nr)) +#define EXYNOS5_GPG0(_nr) (EXYNOS5_GPIO_G0_START + (_nr)) +#define EXYNOS5_GPG1(_nr) (EXYNOS5_GPIO_G1_START + (_nr)) +#define EXYNOS5_GPG2(_nr) (EXYNOS5_GPIO_G2_START + (_nr)) +#define EXYNOS5_GPH0(_nr) (EXYNOS5_GPIO_H0_START + (_nr)) +#define EXYNOS5_GPH1(_nr) (EXYNOS5_GPIO_H1_START + (_nr)) +#define EXYNOS5_GPV0(_nr) (EXYNOS5_GPIO_V0_START + (_nr)) +#define EXYNOS5_GPV1(_nr) (EXYNOS5_GPIO_V1_START + (_nr)) +#define EXYNOS5_GPV2(_nr) (EXYNOS5_GPIO_V2_START + (_nr)) +#define EXYNOS5_GPV3(_nr) (EXYNOS5_GPIO_V3_START + (_nr)) +#define EXYNOS5_GPV4(_nr) (EXYNOS5_GPIO_V4_START + (_nr)) +#define EXYNOS5_GPZ(_nr) (EXYNOS5_GPIO_Z_START + (_nr)) + +/* the end of the EXYNOS5 specific gpios */ + +#define EXYNOS5_GPIO_END (EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1) + +/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */ + +#define S3C_GPIO_END (EXYNOS5_GPIO_END) + +/* define the number of gpios */ + +#define ARCH_NR_GPIOS (CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END) #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/io.h b/arch/arm/mach-exynos/include/mach/io.h deleted file mode 100644 index d5478d247535..000000000000 --- a/arch/arm/mach-exynos/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/io.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> - * - * Based on arch/arm/mach-s5p6442/include/mach/io.h - * - * Default IO routines for EXYNOS4 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H __FILE__ - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 1d401c957835..9bee8535d9e0 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -1,9 +1,8 @@ -/* linux/arch/arm/mach-exynos4/include/mach/irqs.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - IRQ definitions + * EXYNOS - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,160 +16,450 @@ /* PPI: Private Peripheral Interrupt */ -#define IRQ_PPI(x) (x+16) - -#define IRQ_MCT_LOCALTIMER IRQ_PPI(12) +#define IRQ_PPI(x) (x + 16) /* SPI: Shared Peripheral Interrupt */ -#define IRQ_SPI(x) (x+32) - -#define IRQ_EINT0 IRQ_SPI(16) -#define IRQ_EINT1 IRQ_SPI(17) -#define IRQ_EINT2 IRQ_SPI(18) -#define IRQ_EINT3 IRQ_SPI(19) -#define IRQ_EINT4 IRQ_SPI(20) -#define IRQ_EINT5 IRQ_SPI(21) -#define IRQ_EINT6 IRQ_SPI(22) -#define IRQ_EINT7 IRQ_SPI(23) -#define IRQ_EINT8 IRQ_SPI(24) -#define IRQ_EINT9 IRQ_SPI(25) -#define IRQ_EINT10 IRQ_SPI(26) -#define IRQ_EINT11 IRQ_SPI(27) -#define IRQ_EINT12 IRQ_SPI(28) -#define IRQ_EINT13 IRQ_SPI(29) -#define IRQ_EINT14 IRQ_SPI(30) -#define IRQ_EINT15 IRQ_SPI(31) -#define IRQ_EINT16_31 IRQ_SPI(32) - -#define IRQ_MDMA0 IRQ_SPI(33) -#define IRQ_MDMA1 IRQ_SPI(34) -#define IRQ_PDMA0 IRQ_SPI(35) -#define IRQ_PDMA1 IRQ_SPI(36) -#define IRQ_TIMER0_VIC IRQ_SPI(37) -#define IRQ_TIMER1_VIC IRQ_SPI(38) -#define IRQ_TIMER2_VIC IRQ_SPI(39) -#define IRQ_TIMER3_VIC IRQ_SPI(40) -#define IRQ_TIMER4_VIC IRQ_SPI(41) -#define IRQ_MCT_L0 IRQ_SPI(42) -#define IRQ_WDT IRQ_SPI(43) -#define IRQ_RTC_ALARM IRQ_SPI(44) -#define IRQ_RTC_TIC IRQ_SPI(45) -#define IRQ_GPIO_XB IRQ_SPI(46) -#define IRQ_GPIO_XA IRQ_SPI(47) -#define IRQ_MCT_L1 IRQ_SPI(48) - -#define IRQ_UART0 IRQ_SPI(52) -#define IRQ_UART1 IRQ_SPI(53) -#define IRQ_UART2 IRQ_SPI(54) -#define IRQ_UART3 IRQ_SPI(55) -#define IRQ_UART4 IRQ_SPI(56) -#define IRQ_MCT_G0 IRQ_SPI(57) -#define IRQ_IIC IRQ_SPI(58) -#define IRQ_IIC1 IRQ_SPI(59) -#define IRQ_IIC2 IRQ_SPI(60) -#define IRQ_IIC3 IRQ_SPI(61) -#define IRQ_IIC4 IRQ_SPI(62) -#define IRQ_IIC5 IRQ_SPI(63) -#define IRQ_IIC6 IRQ_SPI(64) -#define IRQ_IIC7 IRQ_SPI(65) -#define IRQ_SPI0 IRQ_SPI(66) -#define IRQ_SPI1 IRQ_SPI(67) -#define IRQ_SPI2 IRQ_SPI(68) - -#define IRQ_USB_HOST IRQ_SPI(70) -#define IRQ_USB_HSOTG IRQ_SPI(71) -#define IRQ_MODEM_IF IRQ_SPI(72) -#define IRQ_HSMMC0 IRQ_SPI(73) -#define IRQ_HSMMC1 IRQ_SPI(74) -#define IRQ_HSMMC2 IRQ_SPI(75) -#define IRQ_HSMMC3 IRQ_SPI(76) -#define IRQ_DWMCI IRQ_SPI(77) - -#define IRQ_MIPI_CSIS0 IRQ_SPI(78) -#define IRQ_MIPI_CSIS1 IRQ_SPI(80) - -#define IRQ_ONENAND_AUDI IRQ_SPI(82) -#define IRQ_ROTATOR IRQ_SPI(83) -#define IRQ_FIMC0 IRQ_SPI(84) -#define IRQ_FIMC1 IRQ_SPI(85) -#define IRQ_FIMC2 IRQ_SPI(86) -#define IRQ_FIMC3 IRQ_SPI(87) -#define IRQ_JPEG IRQ_SPI(88) -#define IRQ_2D IRQ_SPI(89) -#define IRQ_PCIE IRQ_SPI(90) - -#define IRQ_MIXER IRQ_SPI(91) -#define IRQ_HDMI IRQ_SPI(92) -#define IRQ_IIC_HDMIPHY IRQ_SPI(93) -#define IRQ_MFC IRQ_SPI(94) -#define IRQ_SDO IRQ_SPI(95) - -#define IRQ_AUDIO_SS IRQ_SPI(96) -#define IRQ_I2S0 IRQ_SPI(97) -#define IRQ_I2S1 IRQ_SPI(98) -#define IRQ_I2S2 IRQ_SPI(99) -#define IRQ_AC97 IRQ_SPI(100) - -#define IRQ_SPDIF IRQ_SPI(104) -#define IRQ_ADC0 IRQ_SPI(105) -#define IRQ_PEN0 IRQ_SPI(106) -#define IRQ_ADC1 IRQ_SPI(107) -#define IRQ_PEN1 IRQ_SPI(108) -#define IRQ_KEYPAD IRQ_SPI(109) -#define IRQ_PMU IRQ_SPI(110) -#define IRQ_GPS IRQ_SPI(111) -#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) -#define IRQ_SLIMBUS IRQ_SPI(113) - -#define IRQ_TSI IRQ_SPI(115) -#define IRQ_SATA IRQ_SPI(116) - -#define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) -#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) - -#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) -#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) -#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) -#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) -#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) -#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) -#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) -#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) - -#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) -#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) -#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) -#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) -#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) -#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) -#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) -#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) - -#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) -#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) -#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) - -#define MAX_COMBINER_NR 16 - -#define IRQ_ADC IRQ_ADC0 -#define IRQ_TC IRQ_PEN0 - -#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) - -#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) - -/* optional GPIO interrupts */ -#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32) -#define IRQ_GPIO1_NR_GROUPS 16 -#define IRQ_GPIO2_NR_GROUPS 9 -#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) - -#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) +#define IRQ_SPI(x) (x + 32) + +/* COMBINER */ + +#define MAX_IRQ_IN_COMBINER 8 +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) +#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) + +/* For EXYNOS4 and EXYNOS5 */ + +#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12) + +#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) + +/* For EXYNOS4 SoCs */ + +#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16) +#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17) +#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18) +#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19) +#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20) +#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21) +#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22) +#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23) +#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24) +#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25) +#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26) +#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27) +#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28) +#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29) +#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30) +#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31) + +#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33) +#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34) +#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35) +#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36) +#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37) +#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38) +#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39) +#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40) +#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41) +#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42) +#define EXYNOS4_IRQ_WDT IRQ_SPI(43) +#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44) +#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45) +#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46) +#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47) +#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48) + +#define EXYNOS4_IRQ_UART0 IRQ_SPI(52) +#define EXYNOS4_IRQ_UART1 IRQ_SPI(53) +#define EXYNOS4_IRQ_UART2 IRQ_SPI(54) +#define EXYNOS4_IRQ_UART3 IRQ_SPI(55) +#define EXYNOS4_IRQ_UART4 IRQ_SPI(56) +#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57) +#define EXYNOS4_IRQ_IIC IRQ_SPI(58) +#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59) +#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60) +#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61) +#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62) +#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63) +#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64) +#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65) +#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66) +#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67) +#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68) + +#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70) +#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71) +#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72) +#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73) +#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74) +#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75) +#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76) +#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77) + +#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80) + +#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82) +#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83) +#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84) +#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85) +#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86) +#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87) +#define EXYNOS4_IRQ_JPEG IRQ_SPI(88) +#define EXYNOS4_IRQ_2D IRQ_SPI(89) +#define EXYNOS4_IRQ_PCIE IRQ_SPI(90) + +#define EXYNOS4_IRQ_MIXER IRQ_SPI(91) +#define EXYNOS4_IRQ_HDMI IRQ_SPI(92) +#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93) +#define EXYNOS4_IRQ_MFC IRQ_SPI(94) +#define EXYNOS4_IRQ_SDO IRQ_SPI(95) + +#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96) +#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97) +#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98) +#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99) +#define EXYNOS4_IRQ_AC97 IRQ_SPI(100) + +#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104) +#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105) +#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106) +#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107) +#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108) +#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109) +#define EXYNOS4_IRQ_PMU IRQ_SPI(110) +#define EXYNOS4_IRQ_GPS IRQ_SPI(111) +#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113) + +#define EXYNOS4_IRQ_TSI IRQ_SPI(115) +#define EXYNOS4_IRQ_SATA IRQ_SPI(116) + +#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) +#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) +#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) +#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) +#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) +#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) +#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) +#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) + +#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) +#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) +#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) +#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) +#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) +#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) +#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) +#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) + +#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) +#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) +#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) + +#define EXYNOS4_MAX_COMBINER_NR 16 + +#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16 +#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9 + +/* + * For Compatibility: + * the default is for EXYNOS4, and + * for exynos5, should be re-mapped at function + */ + +#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC +#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC +#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC +#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC +#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC + +#define IRQ_WDT EXYNOS4_IRQ_WDT +#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM +#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC +#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB +#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA + +#define IRQ_IIC EXYNOS4_IRQ_IIC +#define IRQ_IIC1 EXYNOS4_IRQ_IIC1 +#define IRQ_IIC3 EXYNOS4_IRQ_IIC3 +#define IRQ_IIC5 EXYNOS4_IRQ_IIC5 +#define IRQ_IIC6 EXYNOS4_IRQ_IIC6 +#define IRQ_IIC7 EXYNOS4_IRQ_IIC7 + +#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST + +#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0 +#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1 +#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2 +#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3 + +#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0 + +#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI + +#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0 +#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1 +#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2 +#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3 +#define IRQ_JPEG EXYNOS4_IRQ_JPEG +#define IRQ_2D EXYNOS4_IRQ_2D + +#define IRQ_MIXER EXYNOS4_IRQ_MIXER +#define IRQ_HDMI EXYNOS4_IRQ_HDMI +#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY +#define IRQ_MFC EXYNOS4_IRQ_MFC +#define IRQ_SDO EXYNOS4_IRQ_SDO + +#define IRQ_ADC EXYNOS4_IRQ_ADC0 +#define IRQ_TC EXYNOS4_IRQ_PEN0 + +#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD +#define IRQ_PMU EXYNOS4_IRQ_PMU + +#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0 +#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0 +#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0 +#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0 +#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0 +#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0 +#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0 +#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0 + +#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0 +#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0 +#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 +#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 +#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0 +#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0 +#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0 +#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0 + +#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO +#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC +#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM + +#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS +#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS + +/* For EXYNOS5 SoCs */ + +#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33) +#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34) +#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35) +#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36) +#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37) +#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38) +#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39) +#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40) +#define EXYNOS5_IRQ_RTIC IRQ_SPI(41) +#define EXYNOS5_IRQ_WDT IRQ_SPI(42) +#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43) +#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44) +#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45) +#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46) +#define EXYNOS5_IRQ_GPIO IRQ_SPI(47) +#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) +#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) +#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) +#define EXYNOS5_IRQ_UART0 IRQ_SPI(51) +#define EXYNOS5_IRQ_UART1 IRQ_SPI(52) +#define EXYNOS5_IRQ_UART2 IRQ_SPI(53) +#define EXYNOS5_IRQ_UART3 IRQ_SPI(54) +#define EXYNOS5_IRQ_UART4 IRQ_SPI(55) +#define EXYNOS5_IRQ_IIC IRQ_SPI(56) +#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) +#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) +#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59) +#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60) +#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61) +#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62) +#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63) +#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64) +#define EXYNOS5_IRQ_TMU IRQ_SPI(65) +#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66) +#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67) +#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68) +#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69) +#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70) +#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71) +#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72) +#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73) +#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74) +#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75) +#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76) +#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77) +#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78) +#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79) +#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80) +#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81) +#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82) +#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84) +#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85) +#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86) +#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87) +#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88) +#define EXYNOS5_IRQ_JPEG IRQ_SPI(89) +#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90) +#define EXYNOS5_IRQ_2D IRQ_SPI(91) +#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92) +#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93) +#define EXYNOS5_IRQ_MIXER IRQ_SPI(94) +#define EXYNOS5_IRQ_HDMI IRQ_SPI(95) +#define EXYNOS5_IRQ_MFC IRQ_SPI(96) +#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97) +#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98) +#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99) +#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100) +#define EXYNOS5_IRQ_AC97 IRQ_SPI(101) +#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102) +#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103) +#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104) +#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105) +#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106) + +#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108) +#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109) +#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110) +#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111) +#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113) +#define EXYNOS5_IRQ_CEC IRQ_SPI(114) +#define EXYNOS5_IRQ_SATA IRQ_SPI(115) +#define EXYNOS5_IRQ_NFCON IRQ_SPI(116) + +#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) +#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) +#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) +#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126) +#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127) + +#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2) +#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6) + +#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0) +#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1) +#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2) +#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3) +#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4) +#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5) +#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6) +#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7) + +#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2) +#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3) +#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4) +#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5) +#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6) +#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7) + +#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0) +#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1) +#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2) +#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3) + +#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0) +#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1) +#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2) +#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3) +#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4) +#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5) +#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6) +#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7) + +#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0) +#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1) +#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2) +#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3) +#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4) +#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5) +#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6) +#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7) + +#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0) +#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1) +#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2) +#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3) +#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4) +#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5) +#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6) +#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7) + +#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5) +#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6) + +#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4) +#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5) + +#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3) +#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4) +#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5) +#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6) +#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7) + +#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0) +#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1) +#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6) +#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7) + +#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4) +#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5) +#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6) + +#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) +#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1) +#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2) +#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3) +#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4) +#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5) +#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6) + +#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) +#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) +#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2) +#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5) +#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6) + +#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0) +#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1) + +#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0) +#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1) + +#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0) +#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1) + +#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0) +#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1) + +#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0) +#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1) + +#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0) +#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1) + +#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0) +#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1) + +#define EXYNOS5_MAX_COMBINER_NR 32 + +#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13 +#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9 +#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5 +#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1 + +#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \ + EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR) + +#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0) +#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16) +#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32) +#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) +#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) + +#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 609127df9b02..024d38ff1718 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -25,6 +25,7 @@ #define EXYNOS4_PA_SYSRAM0 0x02025000 #define EXYNOS4_PA_SYSRAM1 0x02020000 +#define EXYNOS5_PA_SYSRAM 0x02020000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 @@ -48,14 +49,23 @@ #define EXYNOS4_PA_ONENAND 0x0C000000 #define EXYNOS4_PA_ONENAND_DMA 0x0C600000 -#define EXYNOS4_PA_CHIPID 0x10000000 +#define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 +#define EXYNOS5_PA_SYSCON 0x10050100 + #define EXYNOS4_PA_PMU 0x10020000 +#define EXYNOS5_PA_PMU 0x10040000 + #define EXYNOS4_PA_CMU 0x10030000 +#define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_SYSTIMER 0x10050000 +#define EXYNOS5_PA_SYSTIMER 0x101C0000 + #define EXYNOS4_PA_WATCHDOG 0x10060000 +#define EXYNOS5_PA_WATCHDOG 0x101D0000 + #define EXYNOS4_PA_RTC 0x10070000 #define EXYNOS4_PA_KEYPAD 0x100A0000 @@ -64,9 +74,12 @@ #define EXYNOS4_PA_DMC1 0x10410000 #define EXYNOS4_PA_COMBINER 0x10440000 +#define EXYNOS5_PA_COMBINER 0x10440000 #define EXYNOS4_PA_GIC_CPU 0x10480000 #define EXYNOS4_PA_GIC_DIST 0x10490000 +#define EXYNOS5_PA_GIC_CPU 0x10480000 +#define EXYNOS5_PA_GIC_DIST 0x10490000 #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_TWD 0x10500600 @@ -97,10 +110,13 @@ #define EXYNOS4_PA_SPI1 0x13930000 #define EXYNOS4_PA_SPI2 0x13940000 - #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 #define EXYNOS4_PA_GPIO3 0x03860000 +#define EXYNOS5_PA_GPIO1 0x11400000 +#define EXYNOS5_PA_GPIO2 0x13400000 +#define EXYNOS5_PA_GPIO3 0x10D10000 +#define EXYNOS5_PA_GPIO4 0x03860000 #define EXYNOS4_PA_MIPI_CSIS0 0x11880000 #define EXYNOS4_PA_MIPI_CSIS1 0x11890000 @@ -115,6 +131,7 @@ #define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 #define EXYNOS4_PA_SROMC 0x12570000 +#define EXYNOS5_PA_SROMC 0x12250000 #define EXYNOS4_PA_EHCI 0x12580000 #define EXYNOS4_PA_OHCI 0x12590000 @@ -122,6 +139,7 @@ #define EXYNOS4_PA_MFC 0x13400000 #define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS5_PA_UART 0x12C00000 #define EXYNOS4_PA_VP 0x12C00000 #define EXYNOS4_PA_MIXER 0x12C10000 @@ -130,6 +148,7 @@ #define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000 #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) +#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000)) #define EXYNOS4_PA_ADC 0x13910000 #define EXYNOS4_PA_ADC1 0x13911000 @@ -139,8 +158,10 @@ #define EXYNOS4_PA_SPDIF 0x139B0000 #define EXYNOS4_PA_TIMER 0x139D0000 +#define EXYNOS5_PA_TIMER 0x12DD0000 #define EXYNOS4_PA_SDRAM 0x40000000 +#define EXYNOS5_PA_SDRAM 0x40000000 /* Compatibiltiy Defines */ @@ -158,7 +179,6 @@ #define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG -#define S3C_PA_UART EXYNOS4_PA_UART #define S3C_PA_SPI0 EXYNOS4_PA_SPI0 #define S3C_PA_SPI1 EXYNOS4_PA_SPI1 #define S3C_PA_SPI2 EXYNOS4_PA_SPI2 @@ -189,15 +209,18 @@ /* Compatibility UART */ -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define EXYNOS4_PA_UART0 0x13800000 +#define EXYNOS4_PA_UART1 0x13810000 +#define EXYNOS4_PA_UART2 0x13820000 +#define EXYNOS4_PA_UART3 0x13830000 +#define EXYNOS4_SZ_UART SZ_256 -#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) +#define EXYNOS5_PA_UART0 0x12C00000 +#define EXYNOS5_PA_UART1 0x12C10000 +#define EXYNOS5_PA_UART2 0x12C20000 +#define EXYNOS5_PA_UART3 0x12C30000 +#define EXYNOS5_SZ_UART SZ_256 -#define S5P_SZ_UART SZ_256 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index 1e4abd64a547..e141c1fd68d8 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -253,6 +253,68 @@ #define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0) #define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT) +/* For EXYNOS5250 */ + +#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) +#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) +#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) + +#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900) + +#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500) + +#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218) +#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130) +#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134) +#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140) +#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144) +#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120) + +#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210) +#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C) +#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220) +#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C) +#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244) +#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250) + +#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310) +#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320) +#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C) +#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340) +#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350) + +#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510) +#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514) +#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520) +#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C) +#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C) +#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548) +#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C) +#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550) +#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554) +#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558) + +#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800) +#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920) +#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928) +#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C) +#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934) +#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944) +#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C) +#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950) +#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960) +#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980) + +#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110) +#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200) +#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500) + +#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030) + +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29) + /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h index 1401b21663a5..e4b5b60dcb85 100644 --- a/arch/arm/mach-exynos/include/mach/regs-gpio.h +++ b/arch/arm/mach-exynos/include/mach/regs-gpio.h @@ -16,6 +16,15 @@ #include <mach/map.h> #include <mach/irqs.h> +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) +#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4)) +#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4)) +#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4)) +#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4)) + +#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7)) + +/* compatibility for plat-s5p/irq-pm.c */ #define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) #define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) @@ -28,15 +37,4 @@ #define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) #define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define EINT_GPIO_0(x) EXYNOS4_GPX0(x) -#define EINT_GPIO_1(x) EXYNOS4_GPX1(x) -#define EINT_GPIO_2(x) EXYNOS4_GPX2(x) -#define EINT_GPIO_3(x) EXYNOS4_GPX3(x) - #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 4fff8e938fec..4c53f38b5a9e 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -31,6 +31,7 @@ #define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26) #define S5P_SWRESET S5P_PMUREG(0x0400) +#define EXYNOS_SWRESET S5P_PMUREG(0x0400) #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h index 21d97bcd9acb..2979995d5a6a 100644 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ b/arch/arm/mach-exynos/include/mach/uncompress.h @@ -1,9 +1,8 @@ -/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - uncompress code + * EXYNOS - uncompress code * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,12 +12,35 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H __FILE__ +#include <asm/mach-types.h> + #include <mach/map.h> + +volatile u8 *uart_base; + #include <plat/uncompress.h> +static unsigned int __raw_readl(unsigned int ptr) +{ + return *((volatile unsigned int *)ptr); +} + static void arch_detect_cpu(void) { - /* we do not need to do any cpu detection here at the moment. */ + u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID); + + /* + * product_id is bits 31:12 + * bits 23:20 describe the exynosX family + * + */ + chip_id >>= 20; + chip_id &= 0xf; + + if (chip_id == 0x5) + uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); + else + uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); /* * For preventing FIFO overrun or infinite loop of UART console, diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e6b02fdf1b09..8245f1c761d9 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -37,13 +37,13 @@ * data from the device tree. */ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0, "exynos4210-uart.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1, "exynos4210-uart.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2, "exynos4210-uart.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3, "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), "exynos4-sdhci.0", NULL), diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c new file mode 100644 index 000000000000..0d26f50081ad --- /dev/null +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -0,0 +1,78 @@ +/* + * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-serial.h> + +#include "common.h" + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the EXYNOS5 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0, + "exynos4210-uart.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1, + "exynos4210-uart.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2, + "exynos4210-uart.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3, + "exynos4210-uart.3", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + {}, +}; + +static void __init exynos5250_dt_map_io(void) +{ + exynos_init_io(NULL, 0); + s3c24xx_init_clocks(24000000); +} + +static void __init exynos5250_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + exynos5250_auxdata_lookup, NULL); +} + +static char const *exynos5250_dt_compat[] __initdata = { + "samsung,exynos5250", + NULL +}; + +DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .init_irq = exynos5_init_irq, + .map_io = exynos5250_dt_map_io, + .handle_irq = gic_handle_irq, + .init_machine = exynos5250_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos5250_dt_compat, + .restart = exynos5_restart, +MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 82ea6fccfb34..b3982c867c9c 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -111,7 +111,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE | MMC_CAP_ERASE), + MMC_CAP_ERASE), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -150,8 +150,7 @@ static struct platform_device emmc_fixed_voltage = { static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 28658da9f423..6bb9dbdd73fd 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -745,8 +745,7 @@ static struct platform_device universal_gpio_keys = { static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -784,8 +783,7 @@ static struct platform_device mmc0_fixed_voltage = { static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, @@ -796,8 +794,7 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .cd_type = S3C_SDHCI_CD_EXTERNAL, }; diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index e8a1caaf1902..897d9a9cf226 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -261,7 +261,10 @@ static void exynos4_clockevent_init(void) mct_comp_device.cpumask = cpumask_of(0); clockevents_register_device(&mct_comp_device); - setup_irq(IRQ_MCT_G0, &mct_comp_event_irq); + if (soc_is_exynos5250()) + setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq); + else + setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq); } #ifdef CONFIG_LOCAL_TIMERS @@ -412,16 +415,16 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) if (mct_int_type == MCT_INT_SPI) { if (cpu == 0) { mct_tick0_event_irq.dev_id = mevt; - evt->irq = IRQ_MCT_L0; - setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + evt->irq = EXYNOS4_IRQ_MCT_L0; + setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq); } else { mct_tick1_event_irq.dev_id = mevt; - evt->irq = IRQ_MCT_L1; - setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); - irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + evt->irq = EXYNOS4_IRQ_MCT_L1; + setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1)); } } else { - enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0); + enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0); } return 0; @@ -437,7 +440,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt) else remove_irq(evt->irq, &mct_tick1_event_irq); else - disable_percpu_irq(IRQ_MCT_LOCALTIMER); + disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER); } static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { @@ -457,11 +460,11 @@ static void __init exynos4_timer_resources(void) if (mct_int_type == MCT_INT_PPI) { int err; - err = request_percpu_irq(IRQ_MCT_LOCALTIMER, + err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, exynos4_mct_tick_isr, "MCT", &percpu_mct_tick); WARN(err, "MCT: can't request IRQ %d (%d)\n", - IRQ_MCT_LOCALTIMER, err); + EXYNOS_IRQ_MCT_LOCALTIMER, err); } local_timer_register(&exynos4_mct_tick_ops); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 0f2035a1eb6e..36c3984aaa47 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -166,7 +166,10 @@ void __init smp_init_cpus(void) void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - ncores = scu_base ? scu_get_core_count(scu_base) : 1; + if (soc_is_exynos5250()) + ncores = 2; + else + ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ if (ncores > nr_cpu_ids) { @@ -183,8 +186,8 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - - scu_enable(scu_base_addr()); + if (!soc_is_exynos5250()) + scu_enable(scu_base_addr()); /* * Write the address of secondary startup into the diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 0b04af2b13cc..13b306808b42 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -183,6 +183,12 @@ static __init int exynos4_pm_init_power_domain(void) #ifdef CONFIG_S5P_DEV_CSIS1 exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam); #endif +#ifdef CONFIG_S5P_DEV_G2D + exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0); +#endif +#ifdef CONFIG_S5P_DEV_JPEG + exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam); +#endif return 0; } arch_initcall(exynos4_pm_init_power_domain); diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index d395bd17c38b..b90d94c17f7c 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * I2C0 GPIO configuration. @@ -18,9 +16,14 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> +#include <plat/cpu.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { + if (soc_is_exynos5250()) + /* will be implemented with gpio function */ + return; + s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 41978ee4f9d0..3e6aaa6361da 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -21,6 +21,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/hardware/dec21285.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 121ad1d4fa39..3b54196447c7 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -14,6 +14,7 @@ #include <asm/hardware/dec21285.h> #include <asm/mach/time.h> +#include <asm/system_info.h> #include "common.h" diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 3194d3f73503..e17e11de4f5e 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -21,7 +21,6 @@ #include <video/vga.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <asm/hardware/dec21285.h> diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c index 4e10090cd87f..5bd266754b95 100644 --- a/arch/arm/mach-footbridge/ebsa285-leds.c +++ b/arch/arm/mach-footbridge/ebsa285-leds.c @@ -24,7 +24,6 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index 15a70396c27d..aba531eebbc6 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -27,18 +27,5 @@ * Translation of various region addresses to virtual addresses */ #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#if 1 -#define __mem_pci(a) (a) -#else - -static inline void __iomem *___mem_pci(void __iomem *p) -{ - unsigned long a = (unsigned long)p; - BUG_ON(a <= 0xc0000000 || a >= 0xe0000000); - return p; -} - -#define __mem_pci(a) ___mem_pci(a) -#endif #endif diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 80a1c5cc9071..cac9f67e7da7 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -17,6 +17,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c index e57102e871fc..5a2bd89cbdca 100644 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ b/arch/arm/mach-footbridge/netwinder-leds.c @@ -24,7 +24,6 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 diff --git a/arch/arm/mach-gemini/include/mach/io.h b/arch/arm/mach-gemini/include/mach/io.h deleted file mode 100644 index c548056b98b2..000000000000 --- a/arch/arm/mach-gemini/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001-2006 Storlink, Corp. - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif /* __MACH_IO_H */ diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index e756d1ac00c2..aa1331e86bcf 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -24,6 +24,7 @@ #include <asm/dma.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h deleted file mode 100644 index 2c8659c21a93..000000000000 --- a/arch/arm/mach-h720x/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/io.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * - * 09-19-2001 JJKIM - * Created from arch/arm/mach-l7200/include/mach/io.h - * - * 03-27-2003 Robert Schwebel <r.schwebel@pengutronix.de>: - * re-unified header files for h720x - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 808b055289b2..410a112bb52e 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -35,7 +35,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/irqs.h> #include "core.h" #include "sysregs.h" diff --git a/arch/arm/mach-highbank/include/mach/io.h b/arch/arm/mach-highbank/include/mach/io.h deleted file mode 100644 index 70cfa3ba7697..000000000000 --- a/arch/arm/mach-highbank/include/mach/io.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#define __io(a) ({ (void)(a); __typesafe_io(0); }) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-highbank/include/mach/irqs.h b/arch/arm/mach-highbank/include/mach/irqs.h deleted file mode 100644 index 9746aab14e9a..000000000000 --- a/arch/arm/mach-highbank/include/mach/irqs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define NR_IRQS 192 - -#endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 52359f80c42d..7561eca131b0 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,3 @@ -config IMX_HAVE_DMA_V1 - bool - config HAVE_IMX_GPC bool @@ -38,7 +35,6 @@ config SOC_IMX1 bool select ARCH_MX1 select CPU_ARM920T - select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -46,7 +42,6 @@ config SOC_IMX21 bool select MACH_MX21 select CPU_ARM926T - select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -61,7 +56,6 @@ config SOC_IMX27 bool select MACH_MX27 select CPU_ARM926T - select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 35fc450fa263..ab939c5046c3 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,5 +1,3 @@ -obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o - obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index b9a95ed75553..98e04f5a87dd 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -662,6 +662,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "dma", dma_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "brom", brom_clk) + _REGISTER_CLOCK(NULL, "emma", emma_clk) _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 1e279af656ad..e56c1a83eee3 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -483,7 +483,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) - _REGISTER_CLOCK(NULL, "csi", csi_clk) + _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c deleted file mode 100644 index 42afc29a7da8..000000000000 --- a/arch/arm/mach-imx/dma-v1.c +++ /dev/null @@ -1,846 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/dma-v1.c - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de> - * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/scatterlist.h> -#include <linux/io.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma-v1.h> - -#define DMA_DCR 0x00 /* Control Register */ -#define DMA_DISR 0x04 /* Interrupt status Register */ -#define DMA_DIMR 0x08 /* Interrupt mask Register */ -#define DMA_DBTOSR 0x0c /* Burst timeout status Register */ -#define DMA_DRTOSR 0x10 /* Request timeout Register */ -#define DMA_DSESR 0x14 /* Transfer Error Status Register */ -#define DMA_DBOSR 0x18 /* Buffer overflow status Register */ -#define DMA_DBTOCR 0x1c /* Burst timeout control Register */ -#define DMA_WSRA 0x40 /* W-Size Register A */ -#define DMA_XSRA 0x44 /* X-Size Register A */ -#define DMA_YSRA 0x48 /* Y-Size Register A */ -#define DMA_WSRB 0x4c /* W-Size Register B */ -#define DMA_XSRB 0x50 /* X-Size Register B */ -#define DMA_YSRB 0x54 /* Y-Size Register B */ -#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */ -#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */ -#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */ -#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */ -#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */ -#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */ -#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */ -#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */ -#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff) -#define CNTR_CNT(x) ((x) & 0xffffff) -#define CCR_ACRPT (1<<14) -#define CCR_DMOD_LINEAR (0x0 << 12) -#define CCR_DMOD_2D (0x1 << 12) -#define CCR_DMOD_FIFO (0x2 << 12) -#define CCR_DMOD_EOBFIFO (0x3 << 12) -#define CCR_SMOD_LINEAR (0x0 << 10) -#define CCR_SMOD_2D (0x1 << 10) -#define CCR_SMOD_FIFO (0x2 << 10) -#define CCR_SMOD_EOBFIFO (0x3 << 10) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 (0x0 << 6) -#define CCR_DSIZ_8 (0x1 << 6) -#define CCR_DSIZ_16 (0x2 << 6) -#define CCR_SSIZ_32 (0x0 << 4) -#define CCR_SSIZ_8 (0x1 << 4) -#define CCR_SSIZ_16 (0x2 << 4) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void (*prog_handler) (int, void *, struct scatterlist *); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int resbytes; - int dma_num; - - int in_use; - - u32 ccr_from_device; - u32 ccr_to_device; - - struct timer_list watchdog; - - int hw_chaining; -}; - -static void __iomem *imx_dmav1_baseaddr; - -static void imx_dmav1_writel(unsigned val, unsigned offset) -{ - __raw_writel(val, imx_dmav1_baseaddr + offset); -} - -static unsigned imx_dmav1_readl(unsigned offset) -{ - return __raw_readl(imx_dmav1_baseaddr + offset); -} - -static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -static struct clk *dma_clk; - -static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) -{ - if (cpu_is_mx27()) - return imxdma->hw_chaining; - else - return 0; -} - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - */ -static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long now; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return 0; - } - - now = min(imxdma->resbytes, sg->length); - if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP) - imxdma->resbytes -= now; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - imx_dmav1_writel(sg->dma_address, DMA_DAR(channel)); - else - imx_dmav1_writel(sg->dma_address, DMA_SAR(channel)); - - imx_dmav1_writel(now, DMA_CNTR(channel)); - - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " - "size 0x%08x\n", channel, - imx_dmav1_readl(DMA_DAR(channel)), - imx_dmav1_readl(DMA_SAR(channel)), - imx_dmav1_readl(DMA_CNTR(channel))); - - return now; -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from - * device transfer - * - * @channel: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - imxdma->sg = NULL; - imxdma->dma_mode = dmamode; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - channel); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_SAR(channel)); - imx_dmav1_writel(dma_address, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - imx_dmav1_writel(dma_address, DMA_SAR(channel)); - imx_dmav1_writel(dev_addr, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_to_device, - DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dmav1_writel(dma_length, DMA_CNTR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_single); - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @channel: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for - * transfer specified by provided parameters. The scatter-gather emulation - * is set up according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(channel) has to specify transfer parameters, the next settings is - * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is - * specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options - * combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(int channel, - struct scatterlist *sg, unsigned int sgcount, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (imxdma->in_use) - return -EBUSY; - - imxdma->sg = sg; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n", - channel); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_SAR(channel)); - imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dma_sg_next(channel, sg); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_sg); - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - u32 dreq = 0; - - imxdma->hw_chaining = 0; - - if (hw_chaining) { - imxdma->hw_chaining = 1; - if (!imx_dma_hw_chain(imxdma)) - return -EINVAL; - } - - if (dmareq) - dreq = CCR_REN; - - imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; - imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - - imx_dmav1_writel(dmareq, DMA_RSSR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_config_channel); - -void imx_dma_config_burstlen(int channel, unsigned int burstlen) -{ - imx_dmav1_writel(burstlen, DMA_BLR(channel)); -} -EXPORT_SYMBOL(imx_dma_config_burstlen); - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification - * handlers - * @channel: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imx_dmav1_writel(1 << channel, DMA_DISR); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_handlers); - -/** - * imx_dma_setup_progression_handler - setup i.MX DMA channel progression - * handlers - * @channel: i.MX DMA channel number - * @prog_handler: the pointer to the function called if the transfer progresses - */ -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imxdma->prog_handler = prog_handler; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_progression_handler); - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @channel: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", channel); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return; - } - - if (imxdma->in_use) - return; - - local_irq_save(flags); - - imx_dmav1_writel(1 << channel, DMA_DISR); - imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR); - imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, DMA_CCR(channel)); - - if ((cpu_is_mx21() || cpu_is_mx27()) && - imxdma->sg && imx_dma_hw_chain(imxdma)) { - imxdma->sg = sg_next(imxdma->sg); - if (imxdma->sg) { - u32 tmp; - imx_dma_sg_next(channel, imxdma->sg); - tmp = imx_dmav1_readl(DMA_CCR(channel)); - imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_CCR(channel)); - } - } - imxdma->in_use = 1; - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_enable); - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @channel: i.MX DMA channel number - */ -void imx_dma_disable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", channel); - - if (imx_dma_hw_chain(imxdma)) - del_timer(&imxdma->watchdog); - - local_irq_save(flags); - imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR); - imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN, - DMA_CCR(channel)); - imx_dmav1_writel(1 << channel, DMA_DISR); - imxdma->in_use = 0; - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_disable); - -static void imx_dma_watchdog(unsigned long chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - imx_dmav1_writel(0, DMA_CCR(chno)); - imxdma->in_use = 0; - imxdma->sg = NULL; - - if (imxdma->err_handler) - imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT); -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr; - struct imx_dma_channel *imxdma; - unsigned int err_mask; - int errcode; - - disr = imx_dmav1_readl(DMA_DISR); - - err_mask = imx_dmav1_readl(DMA_DBTOSR) | - imx_dmav1_readl(DMA_DRTOSR) | - imx_dmav1_readl(DMA_DSESR) | - imx_dmav1_readl(DMA_DBOSR); - - if (!err_mask) - return IRQ_HANDLED; - - imx_dmav1_writel(disr & err_mask, DMA_DISR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (!(err_mask & (1 << i))) - continue; - imxdma = &imx_dma_channels[i]; - errcode = 0; - - if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DBTOSR); - errcode |= IMX_DMA_ERR_BURST; - } - if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DRTOSR); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DSESR); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DBOSR); - errcode |= IMX_DMA_ERR_BUFFER; - } - if (imxdma->name && imxdma->err_handler) { - imxdma->err_handler(i, imxdma->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, imxdma->name, - errcode & IMX_DMA_ERR_BURST ? " burst" : "", - errcode & IMX_DMA_ERR_REQUEST ? " request" : "", - errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "", - errcode & IMX_DMA_ERR_BUFFER ? " buffer" : ""); - } - return IRQ_HANDLED; -} - -static void dma_irq_handle_channel(int chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - if (!imxdma->name) { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", chno); - return; - } - - if (imxdma->sg) { - u32 tmp; - struct scatterlist *current_sg = imxdma->sg; - imxdma->sg = sg_next(imxdma->sg); - - if (imxdma->sg) { - imx_dma_sg_next(chno, imxdma->sg); - - tmp = imx_dmav1_readl(DMA_CCR(chno)); - - if (imx_dma_hw_chain(imxdma)) { - /* FIXME: The timeout should probably be - * configurable - */ - mod_timer(&imxdma->watchdog, - jiffies + msecs_to_jiffies(500)); - - tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - imx_dmav1_writel(tmp, DMA_CCR(chno)); - } else { - imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno)); - tmp |= CCR_CEN; - } - - imx_dmav1_writel(tmp, DMA_CCR(chno)); - - if (imxdma->prog_handler) - imxdma->prog_handler(chno, imxdma->data, - current_sg); - - return; - } - - if (imx_dma_hw_chain(imxdma)) { - del_timer(&imxdma->watchdog); - return; - } - } - - imx_dmav1_writel(0, DMA_CCR(chno)); - imxdma->in_use = 0; - if (imxdma->irq_handler) - imxdma->irq_handler(chno, imxdma->data); -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr; - - if (cpu_is_mx21() || cpu_is_mx27()) - dma_err_handler(irq, dev_id); - - disr = imx_dmav1_readl(DMA_DISR); - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - imx_dmav1_writel(disr, DMA_DISR); - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) - dma_irq_handle_channel(i); - } - - return IRQ_HANDLED; -} - -/** - * imx_dma_request - request/allocate specified channel number - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(int channel, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - int ret = 0; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (channel >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, channel); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -EBUSY; - } - memset(imxdma, 0, sizeof(*imxdma)); - imxdma->name = name; - local_irq_restore(flags); /* request_irq() can block */ - - if (cpu_is_mx21() || cpu_is_mx27()) { - ret = request_irq(MX2x_INT_DMACH0 + channel, - dma_irq_handler, 0, "DMA", NULL); - if (ret) { - imxdma->name = NULL; - pr_crit("Can't register IRQ %d for DMA channel %d\n", - MX2x_INT_DMACH0 + channel, channel); - return ret; - } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; - } - - return ret; -} -EXPORT_SYMBOL(imx_dma_request); - -/** - * imx_dma_free - release previously acquired channel - * @channel: i.MX DMA channel number - */ -void imx_dma_free(int channel) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free free channel %d\n", - __func__, channel); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - imx_dma_disable(channel); - imxdma->name = NULL; - - if (cpu_is_mx21() || cpu_is_mx27()) - free_irq(MX2x_INT_DMACH0 + channel, NULL); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_free); - -/** - * imx_dma_request_by_prio - find and request some of free channels best - * suiting requested priority - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - * - * This function tries to find a free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) - if (!imx_dma_request(i, name)) - return i; - - for (i = best - 1; i >= 0; i--) - if (!imx_dma_request(i, name)) - return i; - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} -EXPORT_SYMBOL(imx_dma_request_by_prio); - -static int __init imx_dma_init(void) -{ - int ret = 0; - int i; - - if (cpu_is_mx1()) - imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); - else if (cpu_is_mx21()) - imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); - else if (cpu_is_mx27()) - imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); - else - return 0; - - dma_clk = clk_get(NULL, "dma"); - if (IS_ERR(dma_clk)) - return PTR_ERR(dma_clk); - clk_enable(dma_clk); - - /* reset DMA module */ - imx_dmav1_writel(DCR_DRST, DMA_DCR); - - if (cpu_is_mx1()) { - ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - pr_crit("Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - pr_crit("Wow! Can't register ERRIRQ for DMA\n"); - free_irq(MX1_DMA_INT, NULL); - return ret; - } - } - - /* enable DMA module */ - imx_dmav1_writel(DCR_DEN, DMA_DCR); - - /* clear all interrupts */ - imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); - - /* disable interrupts */ - imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h deleted file mode 100644 index ac6fd713828a..000000000000 --- a/arch/arm/mach-imx/include/mach/dma-v1.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * linux/arch/arm/mach-imx/include/mach/dma-v1.h - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de> - * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_DMA_V1_H__ -#define __MACH_DMA_V1_H__ - -#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) - -#include <mach/dma.h> - -#define IMX_DMA_CHANNELS 16 - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset)) - -/* DMA Interrupt Mask Register */ -#define MX1_DMA_DIMR MX1_DMA_REG(0x08) - -/* Channel Control Register */ -#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6)) - -#define IMX_DMA_MEMSIZE_32 (0 << 4) -#define IMX_DMA_MEMSIZE_8 (1 << 4) -#define IMX_DMA_MEMSIZE_16 (2 << 4) -#define IMX_DMA_TYPE_LINEAR (0 << 10) -#define IMX_DMA_TYPE_2D (1 << 10) -#define IMX_DMA_TYPE_FIFO (2 << 10) - -#define IMX_DMA_ERR_BURST (1 << 0) -#define IMX_DMA_ERR_REQUEST (1 << 1) -#define IMX_DMA_ERR_TRANSFER (1 << 2) -#define IMX_DMA_ERR_BUFFER (1 << 3) -#define IMX_DMA_ERR_TIMEOUT (1 << 4) - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining); - -void -imx_dma_config_burstlen(int channel, unsigned int burstlen); - -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode); - - -/* - * Use this flag as the dma_length argument to imx_dma_setup_sg() - * to create an endless running dma loop. The end of the scatterlist - * must be linked to the beginning for this to work. - */ -#define IMX_DMA_LENGTH_LOOP ((unsigned int)-1) - -int -imx_dma_setup_sg(int channel, struct scatterlist *sg, - unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)); - -void imx_dma_enable(int channel); - -void imx_dma_disable(int channel); - -int imx_dma_request(int channel, const char *name); - -void imx_dma_free(int channel); - -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); - -#endif /* __MACH_DMA_V1_H__ */ diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 27bc27e6ea41..c650145d1646 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -38,6 +38,8 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -479,6 +481,11 @@ static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + /* * Perform board specific initializations */ @@ -489,6 +496,8 @@ static void __init armadillo5x0_init(void) mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 7696dfa2bdba..da6c1d9af768 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -26,6 +26,7 @@ #include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/system_misc.h> #include <mach/common.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index fc78e8071cd1..15a26e908260 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -24,6 +24,8 @@ #include <linux/serial_8250.h> #include <linux/smsc911x.h> #include <linux/types.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -166,6 +168,11 @@ static struct platform_device kzm_smsc9118_device = { }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static int __init kzm_init_smsc9118(void) { /* @@ -175,6 +182,8 @@ static int __init kzm_init_smsc9118(void) gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_device_register(&kzm_smsc9118_device); } #else diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 02401bbd6d53..83714b0cc290 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -34,6 +34,8 @@ #include <linux/mfd/mc13783.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -242,6 +244,11 @@ static struct platform_device *devices[] __initdata = { static int mx31lilly_baseboard; core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static void __init mx31lilly_board_init(void) { imx31_soc_init(); @@ -280,6 +287,8 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_dev, 1); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ef80751712e7..0abef5f13df5 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -29,6 +29,8 @@ #include <linux/usb/ulpi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -226,6 +228,11 @@ void __init mx31lite_map_io(void) static int mx31lite_baseboard; core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + static void __init mx31lite_init(void) { int ret; @@ -259,6 +266,8 @@ static void __init mx31lite_init(void) if (usbh2_pdata.otg) imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index e14291d89e4f..6ae51c6b95b7 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -97,7 +97,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = { static int lcd_power_gpio = -ENXIO; static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, - void *data) + const void *data) { return !strcmp(chip->label, data); } diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885a..586e9f822124 100644 --- a/arch/arm/mach-imx/mach-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c @@ -33,6 +33,7 @@ #include <mach/iomux-mx51.h> #include <asm/setup.h> +#include <asm/system_info.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381a..24aded9e109f 100644 --- a/arch/arm/mach-imx/mach-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c @@ -36,6 +36,7 @@ #include <mach/iomux-mx51.h> #include <asm/setup.h> +#include <asm/system_info.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 753f4fc9ec04..05641980dc5e 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -23,6 +23,8 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/smsc911x.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <mach/common.h> #include <mach/hardware.h> @@ -214,6 +216,11 @@ static int weim_cs_config(void) return 0; } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + void __init imx53_ard_common_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, @@ -232,6 +239,7 @@ static void __init mx53_ard_board_init(void) imx53_ard_common_init(); mx53_ard_io_init(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index f8ca96c354f2..74127389e7ab 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -21,6 +21,7 @@ #include <linux/err.h> #include <asm/pgtable.h> +#include <asm/system_misc.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> @@ -61,8 +62,8 @@ static void imx3_idle(void) : "=r" (reg)); } -static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, - unsigned int mtype) +static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, + unsigned int mtype, void *caller) { if (mtype == MT_DEVICE) { /* @@ -75,7 +76,7 @@ static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, mtype = MT_DEVICE_NONSHARED; } - return __arm_ioremap(phys_addr, size, mtype); + return __arm_ioremap_caller(phys_addr, size, mtype, caller); } void __init imx3_init_l2x0(void) @@ -134,7 +135,7 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - imx_ioremap = imx3_ioremap; + arch_ioremap_caller = imx3_ioremap_caller; arm_pm_idle = imx3_idle; } @@ -208,7 +209,7 @@ void __init imx35_init_early(void) mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); arm_pm_idle = imx3_idle; - imx_ioremap = imx3_ioremap; + arch_ioremap_caller = imx3_ioremap_caller; } void __init mx35_init_irq(void) diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 51af9fa56944..05250aed61fb 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/clk.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 15b87f26ac96..eaf6c6366ffa 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -25,9 +25,9 @@ #include <mach/hardware.h> #include <mach/platform.h> -#include <asm/irq.h> #include <mach/cm.h> -#include <asm/system.h> +#include <mach/irqs.h> + #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h index 37beed3fa3ed..8de70de3dd0a 100644 --- a/arch/arm/mach-integrator/include/mach/io.h +++ b/arch/arm/mach-integrator/include/mach/io.h @@ -29,6 +29,5 @@ #define PCI_IO_VADDR 0xee000000 #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h index 1fbe6d190222..a19a1a2fcf6b 100644 --- a/arch/arm/mach-integrator/include/mach/irqs.h +++ b/arch/arm/mach-integrator/include/mach/irqs.h @@ -78,5 +78,6 @@ #define IRQ_SIC_CP_LMINT7 46 #define IRQ_SIC_END 46 -#define NR_IRQS 47 +#define NR_IRQS_INTEGRATOR_AP 34 +#define NR_IRQS_INTEGRATOR_CP 47 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 21a1d6cbef40..871f148ffd72 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -38,12 +38,13 @@ #include <mach/hardware.h> #include <mach/platform.h> #include <asm/hardware/arm_timer.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ #include <asm/mach-types.h> +#include <asm/sched_clock.h> #include <mach/lm.h> +#include <mach/irqs.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -325,6 +326,11 @@ static void __init ap_init(void) static unsigned long timer_reload; +static u32 notrace integrator_read_sched_clock(void) +{ + return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE); +} + static void integrator_clocksource_init(unsigned long inrate) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; @@ -341,6 +347,7 @@ static void integrator_clocksource_init(unsigned long inrate) clocksource_mmio_init(base + TIMER_VALUE, "timer2", rate, 200, 16, clocksource_mmio_readl_down); + setup_sched_clock(integrator_read_sched_clock, 16, rate); } static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; @@ -468,6 +475,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = ap_map_io, + .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = integrator_init_early, .init_irq = ap_init_irq, .timer = &ap_timer, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index be9ead4a3bcc..48a115a91d9d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/platform.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/hardware/arm_timer.h> @@ -34,6 +33,7 @@ #include <mach/cm.h> #include <mach/lm.h> +#include <mach/irqs.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -464,6 +464,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = intcp_map_io, + .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq, .timer = &cp_timer, diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 28be186adb89..466defa97842 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -29,7 +29,6 @@ #include <mach/hardware.h> #include <mach/platform.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <mach/cm.h> diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c index 520b6bf81bb1..f1ca9c122861 100644 --- a/arch/arm/mach-integrator/pci.c +++ b/arch/arm/mach-integrator/pci.c @@ -26,11 +26,11 @@ #include <linux/interrupt.h> #include <linux/init.h> -#include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include <mach/irqs.h> + /* * A small note about bridges and interrupts. The DECchip 21050 (and * later) adheres to the PCI-PCI bridge specification. This says that diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 015be770c1d8..67e6f9a9d1a0 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -30,9 +30,9 @@ #include <mach/hardware.h> #include <mach/platform.h> -#include <asm/irq.h> +#include <mach/irqs.h> + #include <asm/signal.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h index dffb234bb967..f13188518025 100644 --- a/arch/arm/mach-iop13xx/include/mach/io.h +++ b/arch/arm/mach-iop13xx/include/mach/io.h @@ -22,20 +22,7 @@ #define IO_SPACE_LIMIT 0xffffffff #define __io(a) __iop13xx_io(a) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) extern void __iomem * __iop13xx_io(unsigned long io_addr); -extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop13xx_iounmap(void __iomem *addr); - -extern u32 iop13xx_atue_mem_base; -extern u32 iop13xx_atux_mem_base; -extern size_t iop13xx_atue_mem_size; -extern size_t iop13xx_atux_mem_size; - -#define __arch_ioremap __iop13xx_ioremap -#define __arch_iounmap __iop13xx_iounmap #endif diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h index 07e9ff7adafb..e190dcd7d72d 100644 --- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h +++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h @@ -5,6 +5,7 @@ /* The ATU offsets can change based on the strapping */ extern u32 iop13xx_atux_pmmr_offset; extern u32 iop13xx_atue_pmmr_offset; +void iop13xx_init_early(void); void iop13xx_init_irq(void); void iop13xx_map_io(void); void iop13xx_platform_init(void); diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c index 48642e66c566..3c364198db9c 100644 --- a/arch/arm/mach-iop13xx/io.c +++ b/arch/arm/mach-iop13xx/io.c @@ -21,6 +21,8 @@ #include <linux/io.h> #include <mach/hardware.h> +#include "pci.h" + void * __iomem __iop13xx_io(unsigned long io_addr) { void __iomem * io_virt; @@ -40,8 +42,8 @@ void * __iomem __iop13xx_io(unsigned long io_addr) } EXPORT_SYMBOL(__iop13xx_io); -void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype) +static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie, + size_t size, unsigned int mtype, void *caller) { void __iomem * retval; @@ -76,17 +78,14 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size, break; default: retval = __arm_ioremap_caller(cookie, size, mtype, - __builtin_return_address(0)); + caller); } return retval; } -EXPORT_SYMBOL(__iop13xx_ioremap); -void __iop13xx_iounmap(void __iomem *addr) +static void __iop13xx_iounmap(volatile void __iomem *addr) { - extern void __iounmap(volatile void __iomem *addr); - if (iop13xx_atue_mem_base) if (addr >= (void __iomem *) iop13xx_atue_mem_base && addr < (void __iomem *) (iop13xx_atue_mem_base + @@ -110,4 +109,9 @@ void __iop13xx_iounmap(void __iomem *addr) skip: return; } -EXPORT_SYMBOL(__iop13xx_iounmap); + +void __init iop13xx_init_early(void) +{ + arch_ioremap_caller = __iop13xx_ioremap_caller; + arch_iounmap = __iop13xx_iounmap; +} diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index abaee8833588..5c96b73e6964 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -92,6 +92,7 @@ static struct sys_timer iq81340mc_timer = { MACHINE_START(IQ81340MC, "Intel IQ81340MC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ .atag_offset = 0x100, + .init_early = iop13xx_init_early, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340mc_timer, diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 690916a09dc6..aa4dd750135a 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -94,6 +94,7 @@ static struct sys_timer iq81340sc_timer = { MACHINE_START(IQ81340SC, "Intel IQ81340SC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ .atag_offset = 0x100, + .init_early = iop13xx_init_early, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, .timer = &iq81340sc_timer, diff --git a/arch/arm/mach-iop13xx/pci.h b/arch/arm/mach-iop13xx/pci.h new file mode 100644 index 000000000000..c70cf5b41e31 --- /dev/null +++ b/arch/arm/mach-iop13xx/pci.h @@ -0,0 +1,6 @@ +#include <linux/types.h> + +extern u32 iop13xx_atue_mem_base; +extern u32 iop13xx_atux_mem_base; +extern size_t iop13xx_atue_mem_size; +extern size_t iop13xx_atux_mem_size; diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h index 2d88264b9863..e2ada265bb8d 100644 --- a/arch/arm/mach-iop32x/include/mach/io.h +++ b/arch/arm/mach-iop32x/include/mach/io.h @@ -15,6 +15,5 @@ #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h index a8a66fc8fbdb..f7c1b6595660 100644 --- a/arch/arm/mach-iop33x/include/mach/io.h +++ b/arch/arm/mach-iop33x/include/mach/io.h @@ -15,6 +15,5 @@ #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c index cdae24e46eea..bbf54d794ce8 100644 --- a/arch/arm/mach-iop33x/uart.c +++ b/arch/arm/mach-iop33x/uart.c @@ -22,7 +22,6 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/memory.h> #include <mach/hardware.h> #include <asm/hardware/iop3xx.h> diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 81c45370a4e6..f214cdff01cb 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -32,7 +32,6 @@ #include <asm/memory.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index e872d238cd0f..4867f408617c 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -36,7 +36,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h index 859e584914d9..f6552d6f35ab 100644 --- a/arch/arm/mach-ixp2000/include/mach/io.h +++ b/arch/arm/mach-ixp2000/include/mach/io.h @@ -18,7 +18,6 @@ #include <mach/hardware.h> #define IO_SPACE_LIMIT 0xffffffff -#define __mem_pci(a) (a) /* * The A? revisions of the IXP2000s assert byte lanes for PCI I/O diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index d519944653ad..915ad49e3b8f 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index b415febd2025..a9f1819ea049 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index dd9838299068..421e38dc0fac 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -30,7 +30,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 7632beadabf6..5196c39cdba4 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -34,7 +34,6 @@ #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 49c36f3cd602..9c02de932fac 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -26,7 +26,6 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 7c1495e4fe7a..d34542425990 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -34,9 +34,9 @@ #include <asm/memory.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 8f2487e1fc4e..d142d45dea12 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -32,7 +32,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h index 4ce4353b9f72..a7aceb55c130 100644 --- a/arch/arm/mach-ixp23xx/include/mach/io.h +++ b/arch/arm/mach-ixp23xx/include/mach/io.h @@ -18,6 +18,5 @@ #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index 5d5dd3e8d069..b0e07db5ceaf 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -36,7 +36,6 @@ #include <asm/memory.h> #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 3cbbd3208fa8..911f5a58e006 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -28,7 +28,6 @@ #include <asm/irq.h> #include <asm/sizes.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 377283fc658c..eaaa3fa9fd05 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index a7277ad470a5..90e42e9982cb 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -165,6 +165,7 @@ static void __init avila_init(void) MACHINE_START(AVILA, "Gateworks Avila Network Platform") /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, @@ -184,6 +185,7 @@ MACHINE_END MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 8508882b13f0..d5719eb42591 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -32,7 +32,6 @@ #include <asm/cputype.h> #include <asm/irq.h> #include <asm/sizes.h> -#include <asm/system.h> #include <asm/mach/pci.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index a6329a0a8ec4..ebbd7fc90eb4 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -31,11 +31,13 @@ #include <mach/udc.h> #include <mach/hardware.h> +#include <mach/io.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> #include <asm/sched_clock.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -517,3 +519,35 @@ void ixp4xx_restart(char mode, const char *cmd) *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; } } + +#ifdef CONFIG_IXP4XX_INDIRECT_PCI +/* + * In the case of using indirect PCI, we simply return the actual PCI + * address and our read/write implementation use that to drive the + * access registers. If something outside of PCI is ioremap'd, we + * fallback to the default. + */ + +static void __iomem *ixp4xx_ioremap_caller(unsigned long addr, size_t size, + unsigned int mtype, void *caller) +{ + if (!is_pci_memory(addr)) + return __arm_ioremap_caller(addr, size, mtype, caller); + + return (void __iomem *)addr; +} + +static void ixp4xx_iounmap(void __iomem *addr) +{ + if (!is_pci_memory((__force u32)addr)) + __iounmap(addr); +} + +void __init ixp4xx_init_early(void) +{ + arch_ioremap_caller = ixp4xx_ioremap_caller; + arch_iounmap = ixp4xx_iounmap; +} +#else +void __init ixp4xx_init_early(void) {} +#endif diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index a74f86ce8bcc..1b83110028d6 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -110,6 +110,7 @@ static void __init coyote_init(void) MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, @@ -129,6 +130,7 @@ MACHINE_END MACHINE_START(IXDPG425, "Intel IXDPG425") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 67be177b336a..97a0af8f1955 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -280,6 +280,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &dsmg600_timer, .init_machine = dsmg600_init, diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 6d5818285af8..9175a25a7511 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -270,6 +270,7 @@ static void __init fsg_init(void) MACHINE_START(FSG, "Freecom FSG-3") /* Maintainer: www.nslu2-linux.org */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 7ecf9b28f1c0..033c71758953 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -97,6 +97,7 @@ static void __init gateway7001_init(void) MACHINE_START(GATEWAY7001, "Gateway 7001 AP") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index c0e3d69a8aec..46bb924962ee 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -12,7 +12,6 @@ #include <linux/pci.h> #include <linux/serial_8250.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> @@ -497,6 +496,7 @@ subsys_initcall(gmlr_pci_init); MACHINE_START(GORAMO_MLR, "MultiLink") /* Maintainer: Krzysztof Halasa */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index a23f89391458..18ebc6be7969 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -165,6 +165,7 @@ static void __init gtwx5715_init(void) MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") /* Maintainer: George Joseph */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h index c30e7e923a73..034bb2a1b805 100644 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -23,8 +23,6 @@ #define PCIBIOS_MAX_MEM 0x4BFFFFFF #endif -#define ARCH_HAS_DMA_SET_COHERENT_MASK - /* Register locations and bits */ #include "ixp4xx-regs.h" diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index ffb9d6afb89f..5cf30d1b78d2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -39,11 +39,7 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); * but in some cases the performance hit is acceptable. In addition, you * cannot mmap() PCI devices in this case. */ -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - -#define __mem_pci(a) (a) - -#else +#ifdef CONFIG_IXP4XX_INDIRECT_PCI /* * In the case of using indirect PCI, we simply return the actual PCI @@ -57,24 +53,6 @@ static inline int is_pci_memory(u32 addr) return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF); } -static inline void __iomem * __indirect_ioremap(unsigned long addr, size_t size, - unsigned int mtype) -{ - if (!is_pci_memory(addr)) - return __arm_ioremap(addr, size, mtype); - - return (void __iomem *)addr; -} - -static inline void __indirect_iounmap(void __iomem *addr) -{ - if (!is_pci_memory((__force u32)addr)) - __iounmap(addr); -} - -#define __arch_ioremap __indirect_ioremap -#define __arch_iounmap __indirect_iounmap - #define writeb(v, p) __indirect_writeb(v, p) #define writew(v, p) __indirect_writew(v, p) #define writel(v, p) __indirect_writel(v, p) diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h index df9250bbf13d..b66bedc64de1 100644 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -121,6 +121,7 @@ extern unsigned long ixp4xx_timer_freq; * Functions used by platform-level setup code */ extern void ixp4xx_map_io(void); +extern void ixp4xx_init_early(void); extern void ixp4xx_init_irq(void); extern void ixp4xx_sys_init(void); extern void ixp4xx_timer_init(void); diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 8a38b39999f8..3d742aee1773 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -254,6 +254,7 @@ static void __init ixdp425_init(void) MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, @@ -269,6 +270,7 @@ MACHINE_END MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, @@ -283,6 +285,7 @@ MACHINE_END MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, @@ -297,6 +300,7 @@ MACHINE_END MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 1010eb7b0083..33cb0955b6bf 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -315,6 +315,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d") /* Maintainer: www.nslu2-linux.org */ .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = nas100d_init, diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index aa355c360d57..e2903faaebb3 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -301,6 +301,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2") /* Maintainer: www.nslu2-linux.org */ .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &nslu2_timer, .init_machine = nslu2_init, diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c index 0940869fcfdd..158ddb79821d 100644 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -243,6 +243,7 @@ static void __init omixp_init(void) MACHINE_START(DEVIXP, "Omicron DEVIXP") .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = omixp_init, @@ -254,6 +255,7 @@ MACHINE_END MACHINE_START(MICCPT, "Omicron MICCPT") .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = omixp_init, @@ -268,6 +270,7 @@ MACHINE_END MACHINE_START(MIC256, "Omicron MIC256") .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = omixp_init, diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 9dec20683291..2798f435aaf4 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -237,6 +237,7 @@ static void __init vulcan_init(void) MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 5ac0f0a0fd8c..a785175b115b 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -98,6 +98,7 @@ static void __init wg302v2_init(void) MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .atag_offset = 0x100, diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index acbc5e1db06f..e299a9576bf0 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o +obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c new file mode 100644 index 000000000000..985453994dd3 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -0,0 +1,152 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-dreamplug.c + * + * Marvell DreamPlug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +struct mtd_partition dreamplug_partitions[] = { + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + }, + { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, + { + .name = "dtb", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K + SZ_512K, + }, +}; + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", + .name = "spi_flash", + .parts = dreamplug_partitions, + .nr_parts = ARRAY_SIZE(dreamplug_partitions), +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mv643xx_eth_platform_data dreamplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data dreamplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data dreamplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data dreamplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "dreamplug:blue:bluetooth", + .gpio = 47, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi", + .gpio = 48, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi_ap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static struct platform_device dreamplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dreamplug_led_data, + } +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP47_GPIO, /* Bluetooth LED */ + MPP48_GPIO, /* Wifi LED */ + MPP49_GPIO, /* Wifi AP LED */ + 0 +}; + +void __init dreamplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dreamplug_mpp_config); + + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dreamplug_ge00_data); + kirkwood_ge01_init(&dreamplug_ge01_data); + kirkwood_sata_init(&dreamplug_sata_data); + kirkwood_sdio_init(&dreamplug_mvsdio_data); + + platform_device_register(&dreamplug_leds); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index fbe6405602ed..1c672d9e6656 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -3,7 +3,7 @@ * * arch/arm/mach-kirkwood/board-dt.c * - * Marvell DreamPlug Reference Board Setup + * Flattened Device Tree board initialization * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -12,150 +12,45 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <plat/mvsdio.h> +#include <asm/mach/map.h> +#include <mach/bridge-regs.h> #include "common.h" -#include "mpp.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, { } }; -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - -static struct mvsdio_platform_data dreamplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - -static void __init dreamplug_init(void) +static void __init kirkwood_dt_init(void) { + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); + /* - * Basic setup. Needs to be called early. + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. */ - kirkwood_mpp_conf(dreamplug_mpp_config); + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); + kirkwood_setup_cpu_mbus(); - kirkwood_ehci_init(); - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); - kirkwood_sdio_init(&dreamplug_mvsdio_data); +#ifdef CONFIG_CACHE_FEROCEON_L2 + kirkwood_l2_init(); +#endif - platform_device_register(&dreamplug_leds); -} + /* internal devices that every board has */ + kirkwood_wdt_init(); + kirkwood_xor0_init(); + kirkwood_xor1_init(); + kirkwood_crypto_init(); -static void __init kirkwood_dt_init(void) -{ - kirkwood_init(); +#ifdef CONFIG_KEXEC + kexec_reinit = kirkwood_enable_pcie; +#endif if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 77d4852e19f2..a02cae881f2f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -279,7 +279,7 @@ void __init kirkwood_crypto_init(void) /***************************************************************************** * XOR0 ****************************************************************************/ -static void __init kirkwood_xor0_init(void) +void __init kirkwood_xor0_init(void) { kirkwood_clk_ctrl |= CGC_XOR0; @@ -291,7 +291,7 @@ static void __init kirkwood_xor0_init(void) /***************************************************************************** * XOR1 ****************************************************************************/ -static void __init kirkwood_xor1_init(void) +void __init kirkwood_xor1_init(void) { kirkwood_clk_ctrl |= CGC_XOR1; @@ -303,7 +303,7 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** * Watchdog ****************************************************************************/ -static void __init kirkwood_wdt_init(void) +void __init kirkwood_wdt_init(void) { orion_wdt_init(kirkwood_tclk); } @@ -392,7 +392,7 @@ void __init kirkwood_audio_init(void) /* * Identify device ID and revision. */ -static char * __init kirkwood_id(void) +char * __init kirkwood_id(void) { u32 dev, rev; @@ -435,7 +435,7 @@ static char * __init kirkwood_id(void) } } -static void __init kirkwood_l2_init(void) +void __init kirkwood_l2_init(void) { #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); @@ -450,7 +450,6 @@ void __init kirkwood_init(void) { printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); - kirkwood_i2s_data.tclk = kirkwood_tclk; /* * Disable propagation of mbus errors to the CPU local bus, diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9071a397136d..fa8e7689c436 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -51,6 +51,21 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_DREAMPLUG_DT +void dreamplug_init(void); +#else +static inline void dreamplug_init(void) {}; +#endif + +/* early init functions not converted to fdt yet */ +char *kirkwood_id(void); +void kirkwood_l2_init(void); +void kirkwood_wdt_init(void); +void kirkwood_xor0_init(void); +void kirkwood_xor1_init(void); +void kirkwood_crypto_init(void); + extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 7088180b018b..0f1710941878 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -20,77 +20,47 @@ #include <linux/io.h> #include <linux/export.h> #include <asm/proc-fns.h> +#include <asm/cpuidle.h> #include <mach/kirkwood.h> #define KIRKWOOD_MAX_STATES 2 -static struct cpuidle_driver kirkwood_idle_driver = { - .name = "kirkwood_idle", - .owner = THIS_MODULE, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); - /* Actual code that puts the SoC in different idle states */ static int kirkwood_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - if (index == 0) - /* Wait for interrupt state */ - cpu_do_idle(); - else if (index == 1) { - /* - * Following write will put DDR in self refresh. - * Note that we have 256 cycles before DDR puts it - * self in self-refresh, so the wait-for-interrupt - * call afterwards won't get the DDR from self refresh - * mode. - */ - writel(0x7, DDR_OPERATION_BASE); - cpu_do_idle(); - } - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - /* Update last residency */ - dev->last_residency = idle_time; + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); return index; } +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = kirkwood_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "DDR SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = KIRKWOOD_MAX_STATES, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + /* Initialize CPU idle by registering the idle states */ static int kirkwood_init_cpuidle(void) { struct cpuidle_device *device; - struct cpuidle_driver *driver = &kirkwood_idle_driver; device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); device->state_count = KIRKWOOD_MAX_STATES; - driver->state_count = KIRKWOOD_MAX_STATES; - - /* Wait for interrupt state */ - driver->states[0].enter = kirkwood_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and DDR self refresh state */ - driver->states[1].enter = kirkwood_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "DDR SR"); - strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index 49dd0cb5e166..5d0ab61700d2 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -20,7 +20,5 @@ static inline void __iomem *__io(unsigned long addr) } #define __io(a) __io(a) -#define __mem_pci(a) (a) - #endif diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h deleted file mode 100644 index a7a63ac3ba4e..000000000000 --- a/arch/arm/mach-ks8695/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/io.h - * - * Copyright (C) 2006 Andrew Victor - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index 37dfcd5bd2ad..ec783a3070ae 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <asm/mach/time.h> +#include <asm/system_misc.h> #include <mach/regs-timer.h> #include <mach/regs-irq.h> diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index fde663508696..75946ac89ee9 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -29,5 +29,30 @@ config ARCH_LPC32XX_UART6_SELECT endmenu +menu "LPC32XX chip components" + +config ARCH_LPC32XX_IRAM_FOR_NET + bool "Use IRAM for network buffers" + default y + help + Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as + network buffer. If the total combined required buffer sizes is + larger than the size of IRAM, then SDRAM will be used instead. + + This can be enabled safely if the IRAM is not intended for other + uses. + +config ARCH_LPC32XX_MII_SUPPORT + bool "Check to enable MII support or leave disabled for RMII support" + help + Say Y here to enable MII support, or N for RMII support. Regardless of + which support is selected, the ethernet interface driver needs to be + selected in the device driver networking section. + + The PHY3250 reference board uses RMII, so users of this board should + say N. + +endmenu + endif diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index f55c772d1816..2fc24ca12054 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -87,6 +87,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/device.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/amba/bus.h> @@ -100,6 +101,8 @@ static DEFINE_SPINLOCK(global_clkregs_lock); +static int usb_pll_enable, usb_pll_valid; + static struct clk clk_armpll; static struct clk clk_usbpll; @@ -384,30 +387,62 @@ static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) static int local_usbpll_enable(struct clk *clk, int enable) { u32 reg; - int ret = -ENODEV; - unsigned long timeout = jiffies + msecs_to_jiffies(10); + int ret = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(20); reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - if (enable == 0) { - reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | - LPC32XX_CLKPWR_USBCTRL_CLK_EN2); - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) { + __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 | + LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), + LPC32XX_CLKPWR_USB_CTRL); + __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1, + LPC32XX_CLKPWR_USB_CTRL); + + if (enable && usb_pll_valid && usb_pll_enable) { + ret = -ENODEV; + /* + * If the PLL rate has been previously set, then the rate + * in the PLL register is valid and can be enabled here. + * Otherwise, it needs to be enabled as part of setrate. + */ + + /* + * Gate clock into PLL + */ reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - /* Wait for PLL lock */ + /* + * Enable PLL + */ + reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + + /* + * Wait for PLL to lock + */ while (time_before(jiffies, timeout) && (ret == -ENODEV)) { reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) ret = 0; + else + udelay(10); } + /* + * Gate clock from PLL if PLL is locked + */ if (ret == 0) { - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2, + LPC32XX_CLKPWR_USB_CTRL); + } else { + __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | + LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), + LPC32XX_CLKPWR_USB_CTRL); } + } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) { + usb_pll_valid = 0; + usb_pll_enable = 0; } return ret; @@ -425,7 +460,7 @@ static unsigned long local_usbpll_round_rate(struct clk *clk, */ rate = rate * 1000; - clkin = clk->parent->rate; + clkin = clk->get_rate(clk); usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; clkin = clkin / usbdiv; @@ -439,7 +474,8 @@ static unsigned long local_usbpll_round_rate(struct clk *clk, static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) { - u32 clkin, reg, usbdiv; + int ret = -ENODEV; + u32 clkin, usbdiv; struct clk_pll_setup pllsetup; /* @@ -448,7 +484,7 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) */ rate = rate * 1000; - clkin = clk->get_rate(clk); + clkin = clk->get_rate(clk->parent); usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; clkin = clkin / usbdiv; @@ -457,22 +493,25 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) return -EINVAL; + /* + * Disable PLL clocks during PLL change + */ local_usbpll_enable(clk, 0); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - pllsetup.analog_on = 1; + pllsetup.analog_on = 0; local_clk_usbpll_setup(&pllsetup); - clk->rate = clk_check_pll_setup(clkin, &pllsetup); + /* + * Start USB PLL and check PLL status + */ + + usb_pll_valid = 1; + usb_pll_enable = 1; - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + ret = local_usbpll_enable(clk, 1); + if (ret >= 0) + clk->rate = clk_check_pll_setup(clkin, &pllsetup); - return 0; + return ret; } static struct clk clk_usbpll = { @@ -1095,7 +1134,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1) _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc) - _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) + _REGISTER_CLOCK("lpc-eth.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd) _REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 6c76bb36559b..bbbf063a74c2 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -160,6 +160,53 @@ struct platform_device lpc32xx_adc_device = { }; /* + * USB support + */ +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32) 0; +static struct resource ohci_resources[] = { + { + .start = IO_ADDRESS(LPC32XX_USB_BASE), + .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1), + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_USB_HOST, + .flags = IORESOURCE_IRQ, + }, +}; +struct platform_device lpc32xx_ohci_device = { + .name = "usb-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xFFFFFFFF, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +/* + * Network Support + */ +static struct resource net_resources[] = { + [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K), + [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K), + [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET), +}; + +static u64 lpc32xx_mac_dma_mask = 0xffffffffUL; +struct platform_device lpc32xx_net_device = { + .name = "lpc-eth", + .id = 0, + .dev = { + .dma_mask = &lpc32xx_mac_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(net_resources), + .resource = net_resources, +}; + +/* * Returns the unique ID for the device */ void lpc32xx_get_uid(u32 devid[4]) diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 68f2e46d98ad..68e45e8c9486 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -19,6 +19,7 @@ #ifndef __LPC32XX_COMMON_H #define __LPC32XX_COMMON_H +#include <mach/board.h> #include <linux/platform_device.h> /* @@ -31,6 +32,8 @@ extern struct platform_device lpc32xx_i2c2_device; extern struct platform_device lpc32xx_tsc_device; extern struct platform_device lpc32xx_adc_device; extern struct platform_device lpc32xx_rtc_device; +extern struct platform_device lpc32xx_ohci_device; +extern struct platform_device lpc32xx_net_device; /* * Other arch specific structures and functions @@ -67,7 +70,6 @@ extern u32 clk_get_pclk_div(void); extern void lpc32xx_get_uid(u32 devid[4]); extern u32 lpc32xx_return_iram_size(void); - /* * Pointers used for sizing and copying suspend function data */ diff --git a/arch/arm/mach-lpc32xx/include/mach/io.h b/arch/arm/mach-lpc32xx/include/mach/board.h index 9b59ab5cef89..52531ca7bd1d 100644 --- a/arch/arm/mach-lpc32xx/include/mach/io.h +++ b/arch/arm/mach-lpc32xx/include/mach/board.h @@ -1,5 +1,5 @@ /* - * arch/arm/mach-lpc32xx/include/mach/io.h + * arm/arch/mach-lpc32xx/include/mach/board.h * * Author: Kevin Wells <kevin.wells@nxp.com> * @@ -16,12 +16,9 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H -#define IO_SPACE_LIMIT 0xffffffff +extern u32 lpc32xx_return_iram_size(void); -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif +#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index c74de01ab5b6..d080cb1123dd 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -150,6 +150,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT, }, + [IRQ_LPC32XX_ETHERNET] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT, + }, [IRQ_LPC32XX_USB_OTG_ATX] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT, diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 0d79a3f8a5e0..7f7401ec7487 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/platform.h> +#include <mach/board.h> #include <mach/gpio-lpc32xx.h> #include "common.h" @@ -255,6 +256,8 @@ static struct platform_device *phy3250_devs[] __initdata = { &lpc32xx_watchdog_device, &lpc32xx_gpio_led_device, &lpc32xx_adc_device, + &lpc32xx_ohci_device, + &lpc32xx_net_device, }; static struct amba_device *amba_devs[] __initdata = { diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 3588a5584153..bf5d8e195c3e 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -23,6 +23,7 @@ #include <mach/addr-map.h> #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> +#include <mach/irqs.h> #include <video/pxa168fb.h> #include <linux/input.h> #include <plat/pxa27x_keypad.h> @@ -239,7 +240,7 @@ static void __init common_init(void) MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .map_io = mmp_map_io, - .nr_irqs = IRQ_BOARD_START, + .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, @@ -248,7 +249,7 @@ MACHINE_END MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .map_io = mmp_map_io, - .nr_irqs = IRQ_BOARD_START, + .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index b148a9dc5a44..603542ae6fbd 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -43,6 +43,7 @@ static void __init avengers_lite_init(void) MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") .map_io = mmp_map_io, + .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = avengers_lite_init, diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index d839fe6421e6..5cb769cd26d9 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -28,7 +28,7 @@ #include "common.h" -#define BROWNSTONE_NR_IRQS (IRQ_BOARD_START + 40) +#define BROWNSTONE_NR_IRQS (MMP_NR_IRQS + 40) #define GPIO_5V_ENABLE (89) @@ -158,7 +158,7 @@ static struct platform_device brownstone_v_5vp_device = { }; static struct max8925_platform_data brownstone_max8925_info = { - .irq_base = IRQ_BOARD_START, + .irq_base = MMP_NR_IRQS, }; static struct i2c_board_info brownstone_twsi1_info[] = { diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 062b5b93c50e..9292b7966e3b 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -14,6 +14,7 @@ #include <asm/page.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include <mach/addr-map.h> #include <mach/cputype.h> diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 2ee8cd7829dd..8059cc0905c6 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -23,10 +23,11 @@ #include <mach/addr-map.h> #include <mach/mfp-mmp2.h> #include <mach/mmp2.h> +#include <mach/irqs.h> #include "common.h" -#define FLINT_NR_IRQS (IRQ_BOARD_START + 48) +#define FLINT_NR_IRQS (MMP_NR_IRQS + 48) static unsigned long flint_pin_config[] __initdata = { /* UART1 */ diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 87765467de63..f516e74ce0d5 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -191,7 +191,7 @@ static void __init gplugd_init(void) MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .map_io = mmp_map_io, - .nr_irqs = IRQ_BOARD_START, + .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = gplugd_init, diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h index 3e404acd6ff4..b1ece08174e8 100644 --- a/arch/arm/mach-mmp/include/mach/addr-map.h +++ b/arch/arm/mach-mmp/include/mach/addr-map.h @@ -11,12 +11,6 @@ #ifndef __ASM_MACH_ADDR_MAP_H #define __ASM_MACH_ADDR_MAP_H -#ifndef __ASSEMBLER__ -#define IOMEM(x) ((void __iomem *)(x)) -#else -#define IOMEM(x) (x) -#endif - /* APB - Application Subsystem Peripheral Bus * * NOTE: the DMA controller registers are actually on the AXI fabric #1 diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h deleted file mode 100644 index e7adf3d012c1..000000000000 --- a/arch/arm/mach-mmp/include/mach/io.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/io.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_IO_H -#define __ASM_MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index 34635a0bbb59..d0e746626a3d 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -223,7 +223,6 @@ #define MMP_GPIO_TO_IRQ(gpio) (IRQ_GPIO_START + (gpio)) #define IRQ_BOARD_START (IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO) - -#define NR_IRQS (IRQ_BOARD_START) +#define MMP_NR_IRQS IRQ_BOARD_START #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c index d21c5441a3d0..7895d277421e 100644 --- a/arch/arm/mach-mmp/irq-mmp2.c +++ b/arch/arm/mach-mmp/irq-mmp2.c @@ -15,6 +15,7 @@ #include <linux/irq.h> #include <linux/io.h> +#include <mach/irqs.h> #include <mach/regs-icu.h> #include <mach/mmp2.h> diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 96cf5c8fe47d..ff73249884d0 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -19,6 +19,7 @@ #include <linux/mfd/max8925.h> #include <linux/interrupt.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> @@ -27,7 +28,7 @@ #include "common.h" -#define JASPER_NR_IRQS (IRQ_BOARD_START + 48) +#define JASPER_NR_IRQS (MMP_NR_IRQS + 48) static unsigned long jasper_pin_config[] __initdata = { /* UART1 */ @@ -135,7 +136,7 @@ static struct max8925_power_pdata jasper_power_data = { static struct max8925_platform_data jasper_max8925_info = { .backlight = &jasper_backlight_data, .power = &jasper_power_data, - .irq_base = IRQ_BOARD_START, + .irq_base = MMP_NR_IRQS, }; static struct i2c_board_info jasper_twsi1_info[] = { diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index f7d59c03fc67..b24d2c32cba9 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <asm/mach/time.h> +#include <asm/system_misc.h> #include <mach/addr-map.h> #include <mach/cputype.h> #include <mach/regs-apbc.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index bc97170125bf..b28f9084dfff 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -101,6 +101,7 @@ static void __init tavorevb_init(void) MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") .map_io = mmp_map_io, + .nr_irqs = MMP_NR_IRQS, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = tavorevb_init, diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index 0523e422990e..42bef6674ecf 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -26,6 +26,7 @@ #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> #include <mach/teton_bga.h> +#include <mach/irqs.h> #include "common.h" @@ -83,7 +84,7 @@ static void __init teton_bga_init(void) MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") .map_io = mmp_map_io, - .nr_irqs = IRQ_BOARD_START, + .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = teton_bga_init, diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index e72c709da44f..3fc9ed21f97d 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -38,7 +38,7 @@ * 16 board interrupts -- PCA9575 GPIO expander * 24 board interrupts -- 88PM860x PMIC */ -#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 16 + 16 + 24) +#define TTCDKB_NR_IRQS (MMP_NR_IRQS + 16 + 16 + 24) static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ @@ -131,7 +131,7 @@ static struct platform_device *ttc_dkb_devices[] = { static struct pca953x_platform_data max7312_data[] = { { .gpio_base = TTCDKB_GPIO_EXT0(0), - .irq_base = IRQ_BOARD_START, + .irq_base = MMP_NR_IRQS, }, }; diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index a60ab6d04ec5..3698a370d636 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -68,6 +68,11 @@ static struct platform_device *devices[] __initdata = { extern struct sys_timer msm_timer; +static void __init halibut_init_early(void) +{ + arch_ioremap_caller = __msm_ioremap_caller; +} + static void __init halibut_init_irq(void) { msm_init_irq(); @@ -96,6 +101,7 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") .atag_offset = 0x100, .fixup = halibut_fixup, .map_io = halibut_map_io, + .init_early = halibut_init_early, .init_irq = halibut_init_irq, .init_machine = halibut_init, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 97b8191d9d38..4a8ea0d40b6f 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <asm/system.h> #include <mach/system.h> #include <mach/vreg.h> #include <mach/board.h> diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 6b9b227c87c5..5414f76ec0a9 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -43,6 +43,11 @@ static struct platform_device *devices[] __initdata = { extern struct sys_timer msm_timer; +static void __init trout_init_early(void) +{ + arch_ioremap_caller = __msm_ioremap_caller; +} + static void __init trout_init_irq(void) { msm_init_irq(); @@ -96,6 +101,7 @@ MACHINE_START(TROUT, "HTC Dream") .atag_offset = 0x100, .fixup = trout_fixup, .map_io = trout_map_io, + .init_early = trout_init_early, .init_irq = trout_init_irq, .init_machine = trout_init, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h deleted file mode 100644 index dc1b928745e9..000000000000 --- a/arch/arm/mach-msm/include/mach/io.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-msm/include/mach/io.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __arch_ioremap __msm_ioremap -#define __arch_iounmap __iounmap - -void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype); - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -void msm_map_qsd8x50_io(void); -void msm_map_msm7x30_io(void); -void msm_map_msm8x60_io(void); -void msm_map_msm8960_io(void); - -extern unsigned int msm_shared_ram_phys; - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 8af46123dab6..6c4046c21296 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -38,12 +38,6 @@ * */ -#ifdef __ASSEMBLY__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - #define MSM_VIC_BASE IOMEM(0xE0000000) #define MSM_VIC_PHYS 0xC0000000 #define MSM_VIC_SIZE SZ_4K @@ -111,5 +105,11 @@ #define MSM_AD5_PHYS 0xAC000000 #define MSM_AD5_SIZE (SZ_1M*13) +#ifndef __ASSEMBLY__ + +extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size, + unsigned int mtype, void *caller); + +#endif #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index 198202c267c8..f944fe65a657 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -100,4 +100,8 @@ #define MSM_HSUSB_PHYS 0xA3600000 #define MSM_HSUSB_SIZE SZ_1K +#ifndef __ASSEMBLY__ +extern void msm_map_msm7x30_io(void); +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h index 800b55767e6b..a1752c0284fc 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -50,4 +50,8 @@ #define MSM_DEBUG_UART_PHYS 0x16440000 #endif +#ifndef __ASSEMBLY__ +extern void msm_map_msm8960_io(void); +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index 0faa894729b7..da77cc1d545d 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -122,4 +122,8 @@ #define MSM_SDC4_PHYS 0xA0600000 #define MSM_SDC4_SIZE SZ_4K +#ifndef __ASSEMBLY__ +extern void msm_map_qsd8x50_io(void); +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 54e12caa8d86..5aed57dc808c 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -67,4 +67,8 @@ #define MSM_DEBUG_UART_PHYS 0x19C40000 #endif +#ifndef __ASSEMBLY__ +extern void msm_map_msm8x60_io(void); +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 90682f4599d3..00afdfb8c38f 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -37,12 +37,6 @@ * */ -#ifdef __ASSEMBLY__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - #if defined(CONFIG_ARCH_MSM7X30) #include "msm_iomap-7x30.h" #elif defined(CONFIG_ARCH_QSD8X50) diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index 169a84007456..c14011fe832d 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -16,6 +16,7 @@ #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H #define __ASM_ARCH_MSM_UNCOMPRESS_H +#include <asm/barrier.h> #include <asm/processor.h> #include <mach/msm_iomap.h> diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 578b04e42deb..a1e7b1168850 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -172,8 +172,8 @@ void __init msm_map_msm7x30_io(void) } #endif /* CONFIG_ARCH_MSM7X30 */ -void __iomem * -__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) +void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size, + unsigned int mtype, void *caller) { if (mtype == MT_DEVICE) { /* The peripherals in the 88000000 - D0000000 range @@ -184,7 +184,5 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) mtype = MT_DEVICE_NONSHARED; } - return __arm_ioremap_caller(phys_addr, size, mtype, - __builtin_return_address(0)); + return __arm_ioremap_caller(phys_addr, size, mtype, caller); } -EXPORT_SYMBOL(__msm_ioremap); diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c index 0c56a5aaf588..c56df9e932ae 100644 --- a/arch/arm/mach-msm/smd_debug.c +++ b/arch/arm/mach-msm/smd_debug.c @@ -203,15 +203,9 @@ static ssize_t debug_read(struct file *file, char __user *buf, return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize); } -static int debug_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static const struct file_operations debug_ops = { .read = debug_read, - .open = debug_open, + .open = simple_open, .llseek = default_llseek, }; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 75f4be40b3e5..812808254936 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -24,6 +24,7 @@ #include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/localtimer.h> +#include <asm/sched_clock.h> #include <mach/msm_iomap.h> #include <mach/cpu.h> @@ -105,12 +106,12 @@ static union { static void __iomem *source_base; -static cycle_t msm_read_timer_count(struct clocksource *cs) +static notrace cycle_t msm_read_timer_count(struct clocksource *cs) { return readl_relaxed(source_base + TIMER_COUNT_VAL); } -static cycle_t msm_read_timer_count_shift(struct clocksource *cs) +static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) { /* * Shift timer count down by a constant due to unreliable lower bits @@ -166,6 +167,11 @@ static struct local_timer_ops msm_local_timer_ops __cpuinitdata = { }; #endif /* CONFIG_LOCAL_TIMERS */ +static notrace u32 msm_sched_clock_read(void) +{ + return msm_clocksource.read(&msm_clocksource); +} + static void __init msm_timer_init(void) { struct clock_event_device *ce = &msm_clockevent; @@ -232,6 +238,8 @@ err: res = clocksource_register_hz(cs, dgt_hz); if (res) pr_err("clocksource_register failed\n"); + setup_sched_clock(msm_sched_clock_read, + cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz); } struct sys_timer msm_timer = { diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h index 450e0e1ad092..c7d9d00d8fc1 100644 --- a/arch/arm/mach-mv78xx0/include/mach/io.h +++ b/arch/arm/mach-mv78xx0/include/mach/io.h @@ -20,7 +20,5 @@ static inline void __iomem *__io(unsigned long addr) } #define __io(a) __io(a) -#define __mem_pci(a) (a) - #endif diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h deleted file mode 100644 index 203d7c4a3e11..000000000000 --- a/arch/arm/mach-mxs/include/mach/dma.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_DMA_H__ -#define __MACH_MXS_DMA_H__ - -#include <linux/dmaengine.h> - -struct mxs_dma_data { - int chan_irq; -}; - -static inline int mxs_dma_is_apbh(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); -} - -static inline int mxs_dma_is_apbx(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); -} - -#endif /* __MACH_MXS_DMA_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h index 53e89a09bf0d..4c0e8a64d8c7 100644 --- a/arch/arm/mach-mxs/include/mach/hardware.h +++ b/arch/arm/mach-mxs/include/mach/hardware.h @@ -20,10 +20,4 @@ #ifndef __MACH_MXS_HARDWARE_H__ #define __MACH_MXS_HARDWARE_H__ -#ifdef __ASSEMBLER__ -#define IOMEM(addr) (addr) -#else -#define IOMEM(addr) ((void __force __iomem *)(addr)) -#endif - #endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/io.h b/arch/arm/mach-mxs/include/mach/io.h deleted file mode 100644 index 289b7227e072..000000000000 --- a/arch/arm/mach-mxs/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_IO_H__ -#define __MACH_MXS_IO_H__ - -/* Allow IO space to be anywhere in the memory */ -#define IO_SPACE_LIMIT 0xffffffff - -/* io address mapping macro */ -#define __io(a) __typesafe_io(a) - -#define __mem_pci(a) (a) - -#endif /* __MACH_MXS_IO_H__ */ diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 7aa5ac5d78bf..80ac1fca8a00 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <asm/proc-fns.h> -#include <asm/system.h> +#include <asm/system_misc.h> #include <mach/mxs.h> #include <mach/common.h> diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 59e67979f197..aa627465d914 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -168,7 +168,7 @@ void __init netx_init_irq(void) { int irq; - vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0); + vic_init(io_p2v(NETX_PA_VIC), 0, ~0, 0); for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { irq_set_chip_and_handler(irq, &netx_hif_chip, diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h index 517a2bd37842..b661af2f2145 100644 --- a/arch/arm/mach-netx/include/mach/hardware.h +++ b/arch/arm/mach-netx/include/mach/hardware.h @@ -33,7 +33,7 @@ #define XMAC_MEM_SIZE 0x1000 #define SRAM_MEM_SIZE 0x8000 -#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT) +#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT) #define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) #endif diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h deleted file mode 100644 index c3921cb3b6a6..000000000000 --- a/arch/arm/mach-netx/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/io.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h index 5a03e7ccb01a..fdde22b58ac3 100644 --- a/arch/arm/mach-netx/include/mach/netx-regs.h +++ b/arch/arm/mach-netx/include/mach/netx-regs.h @@ -115,7 +115,7 @@ *********************************/ /* Registers */ -#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs)) +#define NETX_SYSTEM_REG(ofs) IOMEM(NETX_VA_SYSTEM + (ofs)) #define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00) #define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04) #define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) @@ -185,7 +185,7 @@ *******************************/ /* Registers */ -#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs)) +#define NETX_GPIO_REG(ofs) IOMEM(NETX_VA_GPIO + (ofs)) #define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2)) #define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2)) #define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2)) @@ -230,7 +230,7 @@ *******************************/ /* Registers */ -#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs)) +#define NETX_PIO_REG(ofs) IOMEM(NETX_VA_PIO + (ofs)) #define NETX_PIO_INPIO NETX_PIO_REG(0x0) #define NETX_PIO_OUTPIO NETX_PIO_REG(0x4) #define NETX_PIO_OEPIO NETX_PIO_REG(0x8) @@ -240,7 +240,7 @@ *******************************/ /* Registers */ -#define NETX_MIIMU __io(NETX_VA_MIIMU) +#define NETX_MIIMU IOMEM(NETX_VA_MIIMU) /* Bits */ #define MIIMU_SNRDY (1<<0) @@ -317,7 +317,7 @@ *******************************/ /* Registers */ -#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs)) +#define NETX_PFIFO_REG(ofs) IOMEM(NETX_VA_PFIFO + (ofs)) #define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2)) #define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2)) #define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100) @@ -334,7 +334,7 @@ *******************************/ /* Registers */ -#define NETX_MEMCR_REG(ofs) __io(NETX_VA_MEMCR + (ofs)) +#define NETX_MEMCR_REG(ofs) IOMEM(NETX_VA_MEMCR + (ofs)) #define NETX_MEMCR_SRAM_CTRL(cs) NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */ #define NETX_MEMCR_SDRAM_CFG_CTRL NETX_MEMCR_REG(0x40) #define NETX_MEMCR_SDRAM_TIMING_CTRL NETX_MEMCR_REG(0x44) @@ -355,7 +355,7 @@ *******************************/ /* Registers */ -#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs)) +#define NETX_DPMAS_REG(ofs) IOMEM(NETX_VA_DPMAS + (ofs)) #define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8) #define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0) #define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0) @@ -425,7 +425,7 @@ /******************************* * I2C * *******************************/ -#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs)) +#define NETX_I2C_REG(ofs) IOMEM(NETX_VA_I2C, (ofs)) #define NETX_I2C_CTRL NETX_I2C_REG(0x0) #define NETX_I2C_DATA NETX_I2C_REG(0x4) diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h deleted file mode 100644 index 2e1eca1b8243..000000000000 --- a/arch/arm/mach-nomadik/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-nomadik/include/mach/io.h (copied from mach-sa1100) - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 399c4c49722f..a051cb8ae57f 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -14,6 +14,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <plat/board-ams-delta.h> diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index c3068622fdcb..553a2e535764 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -245,8 +245,6 @@ static struct resource h2_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -359,11 +357,9 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata h2_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .irq = OMAP_GPIO_IRQ(58), .platform_data = &tps_board, }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(2), }, }; @@ -428,8 +424,12 @@ static void __init h2_init(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); + h2_smc91x_resources[1].start = gpio_to_irq(0); + h2_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_serial_init(); + h2_i2c_board_info[0].irq = gpio_to_irq(58); + h2_i2c_board_info[1].irq = gpio_to_irq(2); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 64b8584f64ce..4c19f4c06851 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -247,8 +247,6 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(40), - .end = OMAP_GPIO_IRQ(40), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -338,7 +336,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { .modalias = "tsc2101", .bus_num = 2, .chip_select = 0, - .irq = OMAP_GPIO_IRQ(H3_TS_GPIO), .max_speed_hz = 16000000, /* .platform_data = &tsc_platform_data, */ }, @@ -374,11 +371,9 @@ static struct omap_lcd_config h3_lcd_config __initdata = { static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), - /* .irq = OMAP_GPIO_IRQ(??), */ }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(14), }, }; @@ -420,10 +415,14 @@ static void __init h3_init(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); + smc91x_resources[1].start = gpio_to_irq(40); + smc91x_resources[1].end = gpio_to_irq(40); platform_add_devices(devices, ARRAY_SIZE(devices)); + h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); omap_serial_init(); + h3_i2c_board_info[1].irq = gpio_to_irq(14); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 827d83a96af8..60c06ee23855 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -324,8 +324,6 @@ static struct platform_device gpio_leds_device = { static struct resource htcpld_resources[] = { [0] = { - .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), - .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), .flags = IORESOURCE_IRQ, }, }; @@ -450,7 +448,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = { { .modalias = "ads7846", .platform_data = &htcherald_ts_platform_data, - .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS), .max_speed_hz = 2500000, .bus_num = 2, .chip_select = 1, @@ -576,6 +573,8 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ + htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS); + htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -583,6 +582,7 @@ static void __init htcherald_init(void) htcherald_usb_enable(); omap1_usb_init(&htcherald_usb_config); + htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS); spi_register_board_info(htcherald_spi_board_info, ARRAY_SIZE(htcherald_spi_board_info)); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 61219182d16a..67d7fd57a692 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -248,8 +248,6 @@ static struct resource innovator1610_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -409,6 +407,8 @@ static void __init innovator_init(void) #endif #ifdef CONFIG_ARCH_OMAP16XX if (!cpu_is_omap1510()) { + innovator1610_smc91x_resources[1].start = gpio_to_irq(0); + innovator1610_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices)); } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index fe95ec5f6f03..d21dcc2fbc5a 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -147,7 +147,6 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { .bus_num = 2, .chip_select = 0, .max_speed_hz = 2500000, - .irq = OMAP_GPIO_IRQ(15), .platform_data = &nokia770_ads7846_platform_data, }, }; @@ -237,6 +236,7 @@ static void __init omap_nokia770_init(void) omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); + nokia770_spi_board_info[1].irq = gpio_to_irq(15); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 1fe347396f4d..a5f85dda3f69 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -129,8 +129,6 @@ static struct resource osk5912_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -147,8 +145,6 @@ static struct platform_device osk5912_smc91x_device = { static struct resource osk5912_cf_resources[] = { [0] = { - .start = OMAP_GPIO_IRQ(62), - .end = OMAP_GPIO_IRQ(62), .flags = IORESOURCE_IRQ, }, }; @@ -240,7 +236,6 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata osk_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)), .platform_data = &tps_board, }, @@ -408,7 +403,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &mistral_ts_info, - .irq = OMAP_GPIO_IRQ(4), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -471,6 +465,7 @@ static void __init osk_mistral_init(void) gpio_direction_input(4); irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); + mistral_boardinfo[0].irq = gpio_to_irq(4); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -542,6 +537,10 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; + osk5912_smc91x_resources[1].start = gpio_to_irq(0); + osk5912_smc91x_resources[1].end = gpio_to_irq(0); + osk5912_cf_resources[0].start = gpio_to_irq(62); + osk5912_cf_resources[0].end = gpio_to_irq(62); platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); l = omap_readl(USB_TRANSCEIVER_CTRL); @@ -556,6 +555,7 @@ static void __init osk_init(void) gpio_direction_input(OMAP_MPUIO(1)); omap_serial_init(); + osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1)); omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 0863d8e2bdf1..a60e6c22f816 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -217,7 +217,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { .modalias = "tsc2102", .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ - .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), .max_speed_hz = 8000000, }, }; @@ -251,6 +250,7 @@ static void __init omap_palmte_init(void) platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); + palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 4ff699c509c0..8d854878547b 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -257,7 +257,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmtt_ts_info, - .irq = OMAP_GPIO_IRQ(6), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -298,6 +297,7 @@ static void __init omap_palmtt_init(void) platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); + palmtt_boardinfo[0].irq = gpio_to_irq(6); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index abcbbd339aeb..a2c5abcd7c84 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -224,7 +224,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmz71_ts_info, - .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -313,6 +312,7 @@ omap_palmz71_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); + palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO); spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); omap1_usb_init(&palmz71_usb_config); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 659d0f75de2c..37232d04233f 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -44,7 +44,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .irq = OMAP_GPIO_IRQ(12), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -52,7 +51,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .irq = OMAP_GPIO_IRQ(13), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -60,7 +58,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .irq = OMAP_GPIO_IRQ(14), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -68,7 +65,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .irq = OMAP_GPIO_IRQ(15), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -80,9 +76,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = voiceblue_ports, - }, }; static int __init ext_uart_init(void) @@ -90,6 +83,11 @@ static int __init ext_uart_init(void) if (!machine_is_voiceblue()) return -ENODEV; + voiceblue_ports[0].irq = gpio_to_irq(12); + voiceblue_ports[1].irq = gpio_to_irq(13); + voiceblue_ports[2].irq = gpio_to_irq(14); + voiceblue_ports[3].irq = gpio_to_irq(15); + serial_device.dev.platform_data = voiceblue_ports; return platform_device_register(&serial_device); } arch_initcall(ext_uart_init); @@ -128,8 +126,6 @@ static struct resource voiceblue_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(8), - .end = OMAP_GPIO_IRQ(8), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -275,6 +271,8 @@ static void __init voiceblue_init(void) irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + voiceblue_smc91x_resources[1].start = gpio_to_irq(8); + voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index f9bf78d4fdfb..401eb3c080c2 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -17,20 +17,12 @@ void omap1_set_vpp(struct platform_device *pdev, int enable) { - static int count; u32 l; - if (enable) { - if (count++ == 0) { - l = omap_readl(EMIFS_CONFIG); - l |= OMAP_EMIFS_CONFIG_WP; - omap_writel(l, EMIFS_CONFIG); - } - } else { - if (count && (--count == 0)) { - l = omap_readl(EMIFS_CONFIG); - l &= ~OMAP_EMIFS_CONFIG_WP; - omap_writel(l, EMIFS_CONFIG); - } - } + l = omap_readl(EMIFS_CONFIG); + if (enable) + l |= OMAP_EMIFS_CONFIG_WP; + else + l &= ~OMAP_EMIFS_CONFIG_WP; + omap_writel(l, EMIFS_CONFIG); } diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index f24c1e2c5044..2b28e1da14b0 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <asm/system_info.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index fa0f32a686aa..88f08cab1717 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -11,7 +11,6 @@ */ #include <mach/hardware.h> -#include <mach/io.h> #include <mach/irqs.h> #include "../../iomap.h" diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h index 37b12e1fd022..ce4f8005b26f 100644 --- a/arch/arm/mach-omap1/include/mach/io.h +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -41,6 +41,5 @@ * drivers out there that might just work if we fake them... */ #define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index d68175761c3d..330c4716b028 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,12 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - #define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 4b818eb9f911..f6b14a14a957 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -17,7 +17,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <plat/fpga.h> diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index 9b99c2894623..3a066ee8d02c 100644 --- a/arch/arm/mach-omap1/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c @@ -5,7 +5,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index da09f4364979..936ed426b84f 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -8,7 +8,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5fdef7a34828..087dba0df47e 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,7 +27,6 @@ #include <linux/io.h> #include <linux/spinlock.h> -#include <asm/system.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 306beaca14c5..f66c32912b22 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,6 +44,7 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0779db150da7..0e628743bd03 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,8 +36,6 @@ #include <asm/assembler.h> -#include <mach/io.h> - #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 2ce0b9ab20e5..00e9d9e9adf1 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -12,7 +12,6 @@ #include <asm/assembler.h> -#include <mach/io.h> #include <mach/hardware.h> #include "iomap.h" diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 2fae6a2740f1..4d8dd9a1b04c 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,7 +44,6 @@ #include <linux/clockchips.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/sched_clock.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index a2e6d0709df2..325b9a0aa4a0 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -46,7 +46,6 @@ #include <linux/clockchips.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/leds.h> #include <asm/irq.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index c8bda62900d8..e658f835d0de 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2D), .flags = I2C_CLIENT_WAKE, - .irq = OMAP_GPIO_IRQ(78), }, }; static int __init omap2430_i2c_init(void) { + sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 30768c2f53fd..a39fc4bbd2b8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -490,21 +490,22 @@ static struct platform_device omap_vwlan_device = { static int omap4_twl6030_hsmmc_late_init(struct device *dev) { - int ret = 0; + int irq = 0; struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct omap_mmc_platform_data *pdata = dev->platform_data; /* Setting MMC1 Card detect Irq */ if (pdev->id == 0) { - ret = twl6030_mmc_card_detect_config(); - if (ret) + irq = twl6030_mmc_card_detect_config(); + if (irq < 0) { pr_err("Failed configuring MMC1 card detect\n"); - pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + - MMCDETECT_INTR_OFFSET; + return irq; + } + pdata->slots[0].card_detect_irq = irq; pdata->slots[0].card_detect = twl6030_mmc_card_detect; } - return ret; + return 0; } static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) @@ -906,7 +907,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void) } static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), .board_ref_clock = WL12XX_REFCLOCK_26, .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; @@ -916,6 +916,7 @@ static void __init omap4_sdp4430_wifi_init(void) int ret; omap4_sdp4430_wifi_mux_init(); + omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); if (ret) pr_err("Error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index ac773829941f..768ece2e9c3b 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -341,6 +339,8 @@ static void __init omap_apollon_init(void) * You have to mux them off in device drivers later on * if not needed. */ + apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); + apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 41b0a2fe0b04..909a8b91b564 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -26,6 +26,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/mmc/host.h> @@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; +static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init cm_t35_init_ethernet(void) { + regulator_register_fixed(0, cm_t35_smsc911x_supplies, + ARRAY_SIZE(cm_t35_smsc911x_supplies)); + regulator_register_fixed(1, sb_t35_smsc911x_supplies, + ARRAY_SIZE(sb_t35_smsc911x_supplies)); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 11cd2a806093..a2010f07de31 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -411,7 +411,6 @@ static struct resource omap_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -639,6 +638,7 @@ static void __init devkit8000_init(void) omap_hsmmc_init(mmc); devkit8000_i2c_init(); + omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 54af800d143c..0bbbabe28fcc 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = { static struct i2c_board_info __initdata h4_i2c_board_info[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(125), }, { /* EEPROM on mainboard */ I2C_BOARD_INFO("24c01", 0x52), @@ -377,6 +376,7 @@ static void __init omap_h4_init(void) */ board_mkp_init(); + h4_i2c_board_info[0].irq = gpio_to_irq(125); i2c_register_board_info(1, h4_i2c_board_info, ARRAY_SIZE(h4_i2c_board_info)); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e558800adfdf..930c0d380435 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void) static inline void __init igep_wlan_bt_init(void) { } #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init igep_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d50a562adfa0..1b6049567ab4 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,6 +22,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/io.h> @@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = { }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap_ldp_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); ldp_init_smsc911x(); omap_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index a659e198892b..49df12735b41 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3evm_init_smsc911x(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) @@ -487,7 +478,6 @@ static struct platform_device omap3evm_wlan_regulator = { }; struct wl12xx_platform_data omap3evm_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO), .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ }; #endif @@ -623,6 +613,7 @@ static void __init omap3_evm_wl12xx_init(void) int ret; /* WL12xx WLAN Init */ + omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO); ret = wl12xx_set_platform_data(&omap3evm_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); @@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void) #endif } +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); if (cpu_is_omap3630()) omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 4a7d8c8a75da..9b3c141ff51b 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3logic_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3torpedo_fix_pbias_voltage(); omap3logic_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 641004380795..4dffc95bddd2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> @@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = { static inline void __init omap3stalker_init_eth(void) { - struct clk *l3ck; - unsigned int rate; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); gpmc_smsc911x_init(&smsc911x_cfg); } @@ -419,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static void __init omap3_stalker_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 8842e04aef01..ae2251fa4a69 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -42,6 +42,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <asm/system_info.h> #include <plat/board.h> #include "common.h" diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e9071a57c37b..d8c0e89f0126 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -231,14 +231,13 @@ static struct platform_device omap_vwlan_device = { }; struct wl12xx_platform_data omap_panda_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), /* PANDA ref clock is 38.4 MHz */ .board_ref_clock = 2, }; static int omap4_twl6030_hsmmc_late_init(struct device *dev) { - int ret = 0; + int irq = 0; struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct omap_mmc_platform_data *pdata = dev->platform_data; @@ -249,14 +248,15 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) } /* Setting MMC1 Card detect Irq */ if (pdev->id == 0) { - ret = twl6030_mmc_card_detect_config(); - if (ret) + irq = twl6030_mmc_card_detect_config(); + if (irq < 0) { dev_err(dev, "%s: Error card detect config(%d)\n", - __func__, ret); - else - pdata->slots[0].card_detect = twl6030_mmc_card_detect; + __func__, irq); + return irq; + } + pdata->slots[0].card_detect = twl6030_mmc_card_detect; } - return ret; + return 0; } static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) @@ -557,6 +557,7 @@ static void __init omap4_panda_init(void) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); + omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); ret = wl12xx_set_platform_data(&omap_panda_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 668533e2a379..33aa3910b09e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = { { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init overo_init(void) { int ret; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_hsmmc_init(mmc); overo_i2c_init(); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 16aebfb8a7ec..d87ee0612098 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -25,6 +25,7 @@ #include <linux/gpio_keys.h> #include <linux/mmc/host.h> #include <linux/power/isp1704_charger.h> +#include <asm/system_info.h> #include <plat/mcspi.h> #include <plat/board.h> @@ -169,7 +170,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .modalias = "tsc2005", .bus_num = 1, .chip_select = 0, - .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), .max_speed_hz = 6000000, .controller_data = &tsc2005_mcspi_config, .platform_data = &tsc2005_pdata, @@ -1128,6 +1128,8 @@ static void __init rx51_init_tsc2005(void) } tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = + gpio_to_irq(RX51_TSC2005_IRQ_GPIO); } void __init rx51_peripherals_init(void) diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 369c2eb7715b..f64f44173061 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,6 +14,9 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> + #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> @@ -43,7 +46,6 @@ static inline void __init zoom_init_smsc911x(void) static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = ZOOM_UART_BASE, - .irq = OMAP_GPIO_IRQ(102), .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, @@ -89,6 +91,8 @@ static inline void __init zoom_init_quaduart(void) if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); + + serial_platform_data[0].irq = gpio_to_irq(102); } static inline int omap_zoom_debugboard_detect(void) @@ -116,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = { &zoom_debugboard_serial_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + int __init zoom_debugboard_init(void) { if (!omap_zoom_debugboard_detect()) return 0; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); zoom_init_smsc911x(); zoom_init_quaduart(); return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 3d39cdb2e250..b797cb279618 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), /* ZOOM ref clock is 26 MHz */ .board_ref_clock = 1, }; @@ -297,7 +296,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + int ret; + + omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO); + ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 981b9f9111a4..f4a626f7c79e 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/list.h> +#include <linux/io.h> #include <plat/hardware.h> #include <plat/clkdev_omap.h> @@ -746,7 +747,7 @@ static struct clk dpll4_m3_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel_mask = OMAP3630_CLKSEL_TV_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -831,7 +832,7 @@ static struct clk dpll4_m4_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -858,7 +859,7 @@ static struct clk dpll4_m5_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel_mask = OMAP3630_CLKSEL_CAM_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .set_rate = &omap2_clksel_set_rate, @@ -885,7 +886,7 @@ static struct clk dpll4_m6_ck = { .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel_mask = OMAP3630_DIV_DPLL4_MASK, .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1393,6 +1394,7 @@ static struct clk cpefuse_fck = { .name = "cpefuse_fck", .ops = &clkops_omap2_dflt, .parent = &sys_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, .recalc = &followparent_recalc, @@ -1402,6 +1404,7 @@ static struct clk ts_fck = { .name = "ts_fck", .ops = &clkops_omap2_dflt, .parent = &omap_32k_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, .recalc = &followparent_recalc, @@ -1411,6 +1414,7 @@ static struct clk usbtll_fck = { .name = "usbtll_fck", .ops = &clkops_omap2_dflt_wait, .parent = &dpll5_m2_ck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .recalc = &followparent_recalc, @@ -1616,6 +1620,7 @@ static struct clk fshostusb_fck = { .name = "fshostusb_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, .recalc = &followparent_recalc, @@ -2042,6 +2047,7 @@ static struct clk omapctrl_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2093,6 +2099,7 @@ static struct clk usb_l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, .clksel = usb_l4_clksel, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -3466,8 +3473,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX), - CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX), + CLK("davinci_emac", NULL, &emac_ick, CK_AM35XX), + CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 79b98f22f207..fa6ea65ad44b 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -26,6 +26,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> +#include <linux/io.h> #include <plat/hardware.h> #include <plat/clkdev_omap.h> @@ -956,8 +957,8 @@ static struct dpll_data dpll_usb_dd = { .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, - .mult_mask = OMAP4430_DPLL_MULT_MASK, - .div1_mask = OMAP4430_DPLL_DIV_MASK, + .mult_mask = OMAP4430_DPLL_MULT_USB_MASK, + .div1_mask = OMAP4430_DPLL_DIV_0_7_MASK, .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, @@ -977,6 +978,7 @@ static struct clk dpll_usb_ck = { .recalc = &omap3_dpll_recalc, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "l3_init_clkdm", }; static struct clk dpll_usb_clkdcoldo_ck = { diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 9299ac291d28..bd7ed13515cc 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -390,7 +390,7 @@ static struct clockdomain emu_sys_44xx_clkdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .cm_inst = OMAP4430_PRM_EMU_CM_INST, .clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP, }; static struct clockdomain l3_dma_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 9498b0f5fbd0..1706ebcec08d 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -76,7 +76,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, } spi_bi->bus_num = bus_num; - spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + spi_bi->irq = gpio_to_irq(gpio_pendown); if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 464cffde58fe..535866489ce3 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -87,29 +87,14 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, return 0; } -/** - * omap3_enter_idle - Programs OMAP3 to enter the specified state - * @dev: cpuidle device - * @drv: cpuidle driver - * @index: the index of state to be entered - * - * Called from the CPUidle framework to program the device to the - * specified target state selected by the governor. - */ -static int omap3_enter_idle(struct cpuidle_device *dev, +static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct omap3_idle_statedata *cx = cpuidle_get_statedata(&dev->states_usage[index]); - struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; - int idle_time; - - /* Used to keep track of the total time in idle */ - getnstimeofday(&ts_preidle); - local_irq_disable(); local_fiq_disable(); pwrdm_set_next_pwrst(mpu_pd, mpu_state); @@ -148,22 +133,29 @@ static int omap3_enter_idle(struct cpuidle_device *dev, } return_sleep_time: - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - local_irq_enable(); local_fiq_enable(); - idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ - USEC_PER_SEC; - - /* Update cpuidle counters */ - dev->last_residency = idle_time; - return index; } /** + * omap3_enter_idle - Programs OMAP3 to enter the specified state + * @dev: cpuidle device + * @drv: cpuidle driver + * @index: the index of state to be entered + * + * Called from the CPUidle framework to program the device to the + * specified target state selected by the governor. + */ +static inline int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle); +} + +/** * next_valid_state - Find next valid C-state * @dev: cpuidle device * @drv: cpuidle driver diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 72e018b9b260..f386cbe9c889 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -62,15 +62,9 @@ static int omap4_enter_idle(struct cpuidle_device *dev, { struct omap4_idle_statedata *cx = cpuidle_get_statedata(&dev->states_usage[index]); - struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; - int idle_time; int cpu_id = smp_processor_id(); - /* Used to keep track of the total time in idle */ - getnstimeofday(&ts_preidle); - - local_irq_disable(); local_fiq_disable(); /* @@ -128,26 +122,17 @@ static int omap4_enter_idle(struct cpuidle_device *dev, if (index > 0) clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - - local_irq_enable(); local_fiq_enable(); - idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ - USEC_PER_SEC; - - /* Update cpuidle counters */ - dev->last_residency = idle_time; - return index; } DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); struct cpuidle_driver omap4_idle_driver = { - .name = "omap4_idle", - .owner = THIS_MODULE, + .name = "omap4_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, }; static inline void _fill_cstate(struct cpuidle_driver *drv, diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 9706c648bc19..db5a88a36c63 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -99,7 +99,7 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) +static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) { u32 reg; u16 control_i2c_1; @@ -125,7 +125,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) } } -static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes) +static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; u32 pipd_mask, pipd_shift; @@ -166,7 +166,7 @@ int __init omap_hdmi_init(enum omap_hdmi_flags flags) return 0; } -static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) +static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) return omap4_dsi_mux_pads(dsi_id, lane_mask); @@ -174,7 +174,7 @@ static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) return 0; } -static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) +static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) omap4_dsi_mux_pads(dsi_id, 0); diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 5e5880d6d099..b6c77be3e8f7 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,15 +19,11 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> -static struct omap_smsc911x_platform_data *gpmc_cfg; - static struct resource gpmc_smsc911x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_16BIT, -}; - -static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -/* Generic regulator definition to satisfy smsc911x */ -static struct regulator_init_data gpmc_smsc911x_reg_init_data = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), - .consumer_supplies = gpmc_smsc911x_supply, -}; - -static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { - .supply_name = "gpmc_smsc911x", - .microvolts = 3300000, - .gpio = -EINVAL, - .startup_delay = 0, - .enable_high = 0, - .enabled_at_boot = 1, - .init_data = &gpmc_smsc911x_reg_init_data, -}; - -/* - * Platform device id of 42 is a temporary fix to avoid conflicts - * with other reg-fixed-voltage devices. The real fix should - * involve the driver core providing a way of dynamically - * assigning a unique id on registration for platform devices - * in the same name space. - */ -static struct platform_device gpmc_smsc911x_regulator = { - .name = "reg-fixed-voltage", - .id = 42, - .dev = { - .platform_data = &gpmc_smsc911x_fixed_reg_data, - }, }; /* @@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = { * assume that pin multiplexing is done in the board-*.c file, * or in the bootloader. */ -void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) +void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg) { struct platform_device *pdev; unsigned long cs_mem_base; int ret; - gpmc_cfg = board_data; - - if (!gpmc_cfg->id) { - ret = platform_device_register(&gpmc_smsc911x_regulator); - if (ret < 0) { - pr_err("Unable to register smsc911x regulators: %d\n", - ret); - return; - } - } - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; @@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (gpmc_cfg->flags) - gpmc_smsc911x_config.flags = gpmc_cfg->flags; + gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT; pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 8121720e942f..b0268eaffe13 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -316,6 +316,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + mmc->max_freq = c->max_freq; if (cpu_is_omap44xx()) mmc->reg_offset = OMAP4_MMC_REG_OFFSET; else @@ -505,6 +506,13 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; + /* + * erratum 2.1.1.128 doesn't apply if board has + * a transceiver is attached + */ + if (hsmmcinfo->transceiver) + mmc_data->controller_flags &= + ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ; } pdev = platform_device_alloc(name, ctrl_nr - 1); diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 07831cc3c171..7f2e790e0929 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -27,6 +27,8 @@ struct omap2_hsmmc_info { char *name; /* or NULL for default */ struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ + int max_freq; /* maximum clock, if constrained by external + * circuitry, or 0 for default */ /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); /* init some special card */ diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h index 4fa72c7cc7cd..1c582a8592b9 100644 --- a/arch/arm/mach-omap2/include/mach/barriers.h +++ b/arch/arm/mach-omap2/include/mach/barriers.h @@ -22,6 +22,8 @@ #ifndef __MACH_BARRIERS_H #define __MACH_BARRIERS_H +#include <asm/outercache.h> + extern void omap_bus_sync(void); #define rmb() dsb() diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h deleted file mode 100644 index b8758c8a9394..000000000000 --- a/arch/arm/mach-omap2/include/mach/io.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from arch/arm/mach-sa1100/include/mach/io.h - * Copyright (C) 1997-1999 Russell King - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h index e6f958165296..0812b154f5b5 100644 --- a/arch/arm/mach-omap2/iomap.h +++ b/arch/arm/mach-omap2/iomap.h @@ -22,12 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index f26b2faa1694..65c33911341f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -35,7 +35,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/system.h> #include <plat/omap_hwmod.h> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 63ab686834c1..13670aa84e58 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -46,7 +46,6 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/smp_scu.h> -#include <asm/system.h> #include <asm/pgalloc.h> #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index eba6cd3816f5..2c27fdb61e66 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1395,7 +1395,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v; + u32 v, softrst_mask; int c = 0; int ret = 0; @@ -1427,11 +1427,13 @@ static int _ocp_softreset(struct omap_hwmod *oh) oh->class->sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) + else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); omap_test_timeout(!(omap_hwmod_read(oh, oh->class->sysc->sysc_offs) - & SYSC_TYPE2_SOFTRESET_MASK), + & softrst_mask), MAX_MODULE_SOFTRESET_WAIT, c); + } if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", @@ -1477,6 +1479,11 @@ static int _reset(struct omap_hwmod *oh) ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh); + if (oh->class->sysc) { + _update_sysc_cache(oh); + _enable_sysc(oh); + } + return ret; } @@ -1786,20 +1793,9 @@ static int _setup(struct omap_hwmod *oh, void *data) return 0; } - if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + if (!(oh->flags & HWMOD_INIT_NO_RESET)) _reset(oh); - /* - * OCP_SYSCONFIG bits need to be reprogrammed after a softreset. - * The _enable() function should be split to - * avoid the rewrite of the OCP_SYSCONFIG register. - */ - if (oh->class->sysc) { - _update_sysc_cache(oh); - _enable_sysc(oh); - } - } - postsetup_state = oh->_postsetup_state; if (postsetup_state == _HWMOD_STATE_UNKNOWN) postsetup_state = _HWMOD_STATE_ENABLED; @@ -1907,20 +1903,10 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - u32 v; - int ret; - - if (!oh || !(oh->_sysc_cache)) + if (!oh) return -EINVAL; - v = oh->_sysc_cache; - ret = _set_softreset(oh, &v); - if (ret) - goto error; - _write_sysconfig(v, oh); - -error: - return ret; + return _ocp_softreset(oh); } /** @@ -2463,26 +2449,28 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, * @oh: struct omap_hwmod * * * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM. Eventually this should sets PRCM wakeup - * registers to cause the PRCM to receive wakeup events from the - * module. Does not set any wakeup routing registers beyond this - * point - if the module is to wake up any other module or subsystem, - * that must be set separately. Called by omap_device code. Returns - * -EINVAL on error or 0 upon success. + * send wakeups to the PRCM, and enable I/O ring wakeup events for + * this IP block if it has dynamic mux entries. Eventually this + * should set PRCM wakeup registers to cause the PRCM to receive + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _enable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, true); spin_unlock_irqrestore(&oh->_lock, flags); @@ -2494,26 +2482,28 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM. Eventually this should clear - * PRCM wakeup registers to cause the PRCM to ignore wakeup events - * from the module. Does not set any wakeup routing registers beyond - * this point - if the module is to wake up any other module or - * subsystem, that must be set separately. Called by omap_device - * code. Returns -EINVAL on error or 0 upon success. + * from sending wakeups to the PRCM, and disable I/O ring wakeup + * events for this IP block if it has dynamic mux entries. Eventually + * this should clear PRCM wakeup registers to cause the PRCM to ignore + * wakeup events from the module. Does not set any wakeup routing + * registers beyond this point - if the module is to wake up any other + * module or subsystem, that must be set separately. Called by + * omap_device code. Returns -EINVAL on error or 0 upon success. */ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) { unsigned long flags; u32 v; - if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) - return -EINVAL; - spin_lock_irqsave(&oh->_lock, flags); - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); + + if (oh->class->sysc && + (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { + v = oh->_sysc_cache; + _disable_wakeup(oh, &v); + _write_sysconfig(v, oh); + } + _set_idle_ioring_wakeup(oh, false); spin_unlock_irqrestore(&oh->_lock, flags); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 08daa5e0eb5f..cc9bd106a854 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2996,6 +2996,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { &omap44xx_l4_abe__mcbsp1_dma, }; +static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap44xx_mcbsp_hwmod_class, @@ -3012,6 +3017,8 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { }, .slaves = omap44xx_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), + .opt_clks = mcbsp1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), }; /* mcbsp2 */ @@ -3071,6 +3078,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { &omap44xx_l4_abe__mcbsp2_dma, }; +static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap44xx_mcbsp_hwmod_class, @@ -3087,6 +3099,8 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { }, .slaves = omap44xx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), + .opt_clks = mcbsp2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), }; /* mcbsp3 */ @@ -3146,6 +3160,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { &omap44xx_l4_abe__mcbsp3_dma, }; +static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap44xx_mcbsp_hwmod_class, @@ -3162,6 +3181,8 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { }, .slaves = omap44xx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), + .opt_clks = mcbsp3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), }; /* mcbsp4 */ @@ -3200,6 +3221,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { &omap44xx_l4_per__mcbsp4, }; +static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { + { .role = "pad_fck", .clk = "pad_clks_ck" }, + { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, +}; + static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap44xx_mcbsp_hwmod_class, @@ -3216,6 +3242,8 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { }, .slaves = omap44xx_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), + .opt_clks = mcbsp4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 9262a6b47702..de6d46451746 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, } oh = omap_hwmod_lookup(opp_def->hwmod_name); if (!oh || !oh->od) { - pr_warn("%s: no hwmod or odev for %s, [%d] " + pr_debug("%s: no hwmod or odev for %s, [%d] " "cannot add OPPs.\n", __func__, opp_def->hwmod_name, i); - return -EINVAL; + continue; } dev = &oh->od->pdev->dev; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index a7bdec69a2b3..d0c1c9695996 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -17,6 +17,8 @@ #include <linux/export.h> #include <linux/suspend.h> +#include <asm/system_misc.h> + #include <plat/omap-pm.h> #include <plat/omap_device.h> #include "common.h" diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 5ca45ca76946..95442b69ae27 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -33,6 +33,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> +#include <asm/system_misc.h> #include <plat/clock.h> #include <plat/sram.h> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 027a537d72b2..703bd1099259 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -31,6 +31,7 @@ #include <trace/events/power.h> #include <asm/suspend.h> +#include <asm/system_misc.h> #include <plat/sram.h> #include "clockdomain.h" @@ -152,8 +153,7 @@ static void omap3_save_secure_ram_context(void) pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { - printk(KERN_ERR "save_secure_sram() returns %08x\n", - ret); + pr_err("save_secure_sram() returns %08x\n", ret); while (1) ; } @@ -288,7 +288,7 @@ void omap_sram_idle(void) break; default: /* Invalid state */ - printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + pr_err("Invalid mpu state in sram_idle\n"); return; } @@ -438,18 +438,17 @@ restore: list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { - printk(KERN_INFO "Powerdomain (%s) didn't enter " - "target state %d\n", + pr_info("Powerdomain (%s) didn't enter " + "target state %d\n", pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) - printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + pr_err("Could not enter target state in pm_suspend\n"); else - printk(KERN_INFO "Successfully put all powerdomains " - "to target state\n"); + pr_info("Successfully put all powerdomains to target state\n"); return ret; } @@ -733,21 +732,22 @@ static int __init omap3_pm_init(void) if (ret) { pr_err("pm: Failed to request pm_io irq\n"); - goto err1; + goto err2; } ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { - printk(KERN_ERR "Failed to setup powerdomains\n"); - goto err2; + pr_err("Failed to setup powerdomains\n"); + goto err3; } (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { - printk(KERN_ERR "Failed to get mpu_pwrdm\n"); - goto err2; + pr_err("Failed to get mpu_pwrdm\n"); + ret = -EINVAL; + goto err3; } neon_pwrdm = pwrdm_lookup("neon_pwrdm"); @@ -780,8 +780,8 @@ static int __init omap3_pm_init(void) omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); if (!omap3_secure_ram_storage) - printk(KERN_ERR "Memory allocation failed when" - "allocating for secure sram context\n"); + pr_err("Memory allocation failed when " + "allocating for secure sram context\n"); local_irq_disable(); local_fiq_disable(); @@ -795,14 +795,17 @@ static int __init omap3_pm_init(void) } omap3_save_scratchpad_contents(); -err1: return ret; -err2: - free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + +err3: list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { list_del(&pwrst->node); kfree(pwrst); } + free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init); +err2: + free_irq(omap_prcm_event_to_irq("wkup"), NULL); +err1: return ret; } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 91e0b1c9b76c..885625352429 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/slab.h> +#include <asm/system_misc.h> #include "common.h" #include "clockdomain.h" @@ -143,7 +144,7 @@ static void omap_default_idle(void) static int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; if (!cpu_is_omap44xx()) @@ -167,14 +168,19 @@ static int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); + l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) goto err2; @@ -182,6 +188,7 @@ static int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8a18d1bd61c8..96ad3dbeac34 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -972,7 +972,13 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm) int pwrdm_state_switch(struct powerdomain *pwrdm) { - return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + int ret; + + ret = pwrdm_wait_transition(pwrdm); + if (!ret) + ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + + return ret; } int pwrdm_clkdm_state_switch(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index eac623c7c3d8..f106d21ff581 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) u32 mask, st; /* XXX read mask from RAM? */ - mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs); - st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs); + mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + irqen_offs); + st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs); return mask & st; } @@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events) */ void omap44xx_prm_ocp_barrier(void) { - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void) void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_OFFSET); saved_mask[1] = - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); /* OCP barrier */ - omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); } @@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) */ void omap44xx_prm_restore_irqen(u32 *saved_mask) { - omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST, + omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 873b51d494ea..d28f848897d6 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -290,7 +290,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) goto err; } - for (i = 0; i <= irq_setup->nr_regs; i++) { + for (i = 0; i < irq_setup->nr_regs; i++) { gc = irq_alloc_generic_chip("PRCM", 1, irq_setup->base_irq + i * 32, prm_base, handle_level_irq); diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index abd283400490..9f6b83d1b193 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -10,7 +10,6 @@ */ #include <linux/linkage.h> -#include <asm/system.h> #include <asm/smp_scu.h> #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index f51348dafafd..dde8a11f47d5 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_EHCI_PORT_MODE_PHY: @@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +static +void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 5dad38ec00ea..24481666d2cd 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -21,6 +21,7 @@ #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/timex.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index d2513ac79ff5..2e6454c8d4ba 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -57,5 +57,14 @@ struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); +/***************************************************************************** + * Helpers to access Orion registers + ****************************************************************************/ +/* + * These are not preempt-safe. Locks, if needed, must be taken + * care of by the caller. + */ +#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r)) +#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r)) #endif diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 91b0f4788597..c3ed15b8ea25 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -32,6 +32,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h deleted file mode 100644 index e9d9afdc2659..000000000000 --- a/arch/arm/mach-orion5x/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/io.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "orion5x.h" - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - - -/***************************************************************************** - * Helpers to access Orion registers - ****************************************************************************/ -/* - * These are not preempt-safe. Locks, if needed, must be taken - * care of by the caller. - */ -#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r)) -#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r)) - - -#endif diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 527213169db0..0c9e413b5805 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/system.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 9a8697b97dd7..c1b5d8a58037 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -21,7 +21,6 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/system.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 09c73659f467..949eaa8f12e3 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -21,7 +21,6 @@ #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/system.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d6a91948e4dc..cb19e1661bb3 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -19,6 +19,7 @@ #include <asm/mach/pci.h> #include <plat/pcie.h> #include <plat/addr-map.h> +#include <mach/orion5x.h> #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index c9abb8fbfa70..7189827d641d 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -15,6 +15,7 @@ #include <linux/mv643xx_eth.h> #include <linux/timex.h> #include <linux/serial_reg.h> +#include <mach/orion5x.h> #include "tsx09-common.h" #include "common.h" diff --git a/arch/arm/mach-picoxcell/include/mach/io.h b/arch/arm/mach-picoxcell/include/mach/io.h deleted file mode 100644 index 7573ec7d10a3..000000000000 --- a/arch/arm/mach-picoxcell/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No ioports, but needed for driver compatibility. */ -#define __io(a) __typesafe_io(a) -/* No PCI possible on picoxcell. */ -#define __mem_pci(a) (a) - -#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h deleted file mode 100644 index 59eac1ee2820..000000000000 --- a/arch/arm/mach-picoxcell/include/mach/irqs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -/* We dynamically allocate our irq_desc's. */ -#define NR_IRQS 0 - -#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index 4cfb40b2ec19..be4c92858509 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -32,7 +32,7 @@ #include <asm/mach-types.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index 7fa4bf2e2125..a4739e9fb2fb 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -24,7 +24,6 @@ #include <linux/io.h> #include <linux/gfp.h> -#include <asm/system.h> #include <mach/hardware.h> #include <mach/dma.h> #include <asm/dma-mapping.h> diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h deleted file mode 100644 index cbf0904540ea..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/io.h +++ /dev/null @@ -1,21 +0,0 @@ - -/* - * arch/arm/mach-pnx4008/include/mach/io.h - * - * Author: Dmitry Chigirev <chigirev@ru.mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 7608c7a288cf..41e4201972d5 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c index 0c8aad4bb0dc..0cfe8af3d3be 100644 --- a/arch/arm/mach-pnx4008/time.c +++ b/arch/arm/mach-pnx4008/time.c @@ -24,7 +24,6 @@ #include <linux/irq.h> #include <linux/io.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/leds.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-prima2/include/mach/io.h b/arch/arm/mach-prima2/include/mach/io.h deleted file mode 100644 index 6c31e9ec279e..000000000000 --- a/arch/arm/mach-prima2/include/mach/io.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/io.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_PRIMA2_IO_H -#define __MACH_PRIMA2_IO_H - -#define IO_SPACE_LIMIT ((resource_size_t)0) - -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index b7a6091ce791..0d024b1e916d 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -18,6 +18,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <mach/map.h> +#include <asm/sched_clock.h> #include <asm/mach/time.h> #define SIRFSOC_TIMER_COUNTER_LO 0x0000 @@ -165,21 +166,9 @@ static struct irqaction sirfsoc_timer_irq = { }; /* Overwrite weak default sched_clock with more precise one */ -unsigned long long notrace sched_clock(void) +static u32 notrace sirfsoc_read_sched_clock(void) { - static int is_mapped; - - /* - * sched_clock is called earlier than .init of sys_timer - * if we map timer memory in .init of sys_timer, system - * will panic due to illegal memory access - */ - if (!is_mapped) { - sirfsoc_of_timer_map(); - is_mapped = 1; - } - - return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE); + return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff); } static void __init sirfsoc_clockevent_init(void) @@ -210,6 +199,8 @@ static void __init sirfsoc_timer_init(void) BUG_ON(rate < CLOCK_TICK_RATE); BUG_ON(rate % CLOCK_TICK_RATE); + sirfsoc_of_timer_map(); + writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); @@ -217,6 +208,8 @@ static void __init sirfsoc_timer_init(void) BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE); + BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); sirfsoc_clockevent_init(); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 61d3c72ded84..fe2d1f80ef50 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -108,10 +108,12 @@ config CSB726_CSB701 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" + select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select PXA27x select IWMMXT select PXA25x select MIGHT_HAVE_PCI + select NEED_MACH_IO_H if PCI config MACH_EM_X270 bool "CompuLab EM-x270 platform" diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index c91727d1fe09..9a8760b72913 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -150,6 +150,7 @@ MACHINE_START(CAPC7117, "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM") .atag_offset = 0x100, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c index 1d5859d9a0e3..9ee2ad6a0a07 100644 --- a/arch/arm/mach-pxa/clock-pxa2xx.c +++ b/arch/arm/mach-pxa/clock-pxa2xx.c @@ -9,6 +9,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/syscore_ops.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 4b981b82d2a5..313274016277 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -44,6 +44,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> +#include <asm/system_info.h> #include <mach/pxa300.h> #include <mach/pxa27x-udc.h> @@ -713,7 +714,6 @@ struct da9030_battery_info cm_x300_battery_info = { static struct regulator_consumer_supply buck2_consumers[] = { { - .dev = NULL, .supply = "vcc_core", }, }; @@ -853,6 +853,7 @@ static void __init cm_x300_fixup(struct tag *tags, char **cmdline, MACHINE_START(CM_X300, "CM-X300 module") .atag_offset = 0x100, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 29d5d541f602..b2f227d36125 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .atag_offset = 0x100, .init_machine = colibri_pxa270_init, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, @@ -320,6 +321,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .atag_offset = 0x100, .init_machine = colibri_pxa270_income_init, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 0846d210cb05..bb6def8ec979 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -186,6 +186,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .atag_offset = 0x100, .init_machine = colibri_pxa300_init, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 6ad3359063af..d88e7b37f1da 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -256,6 +256,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .atag_offset = 0x100, .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 2b8ca0de8a3d..68cc75fac219 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -18,6 +18,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/sizes.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 11f1e735966e..c1fe32db4755 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -40,7 +40,6 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -730,6 +729,7 @@ static void __init fixup_corgi(struct tag *tags, char **cmdline, MACHINE_START(CORGI, "SHARP Corgi") .fixup = fixup_corgi, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, @@ -742,6 +742,7 @@ MACHINE_END MACHINE_START(SHEPHERD, "SHARP Shepherd") .fixup = fixup_corgi, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, @@ -754,6 +755,7 @@ MACHINE_END MACHINE_START(HUSKY, "SHARP Husky") .fixup = fixup_corgi, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 39e265cfc86d..048c4299473c 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> +#include <linux/io.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 88fbec05ec50..b85b4ab7aac6 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/slab.h> +#include <linux/io.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index fb5a51d834e5..67f0de37f46e 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -274,6 +274,7 @@ static void __init csb726_init(void) MACHINE_START(CSB726, "Cogent CSB726") .atag_offset = 0x100, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 84f2d7015cfe..166eee5b8a70 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -12,6 +12,7 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/irda.h> +#include <mach/irqs.h> #include <mach/ohci.h> #include <plat/pxa27x_keypad.h> #include <mach/camera.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index d80c0ba9a095..16ec557b8e43 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1083,19 +1083,19 @@ static void __init em_x270_userspace_consumers_init(void) } /* DA9030 related initializations */ -#define REGULATOR_CONSUMER(_name, _dev, _supply) \ +#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \ static struct regulator_consumer_supply _name##_consumers[] = { \ { \ - .dev = _dev, \ + .dev_name = _dev_name, \ .supply = _supply, \ }, \ } -REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps"); +REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps"); REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); -REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); +REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio"); REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); -REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs"); +REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs"); REGULATOR_CONSUMER(buck2, NULL, "vcc_core"); #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ @@ -1301,6 +1301,7 @@ static void __init em_x270_init(void) MACHINE_START(EM_X270, "Compulab EM-X270") .atag_offset = 0x100, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, @@ -1311,6 +1312,7 @@ MACHINE_END MACHINE_START(EXEDA, "Compulab eXeda") .atag_offset = 0x100, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 5432ecb15def..42254175fcf4 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <mach/hardware.h> -#include <asm/system.h> #include <asm/mach/map.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index ac3b1cef4751..e529a35a44ce 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -235,6 +235,7 @@ static void __init gumstix_init(void) MACHINE_START(GUMSTIX, "Gumstix") .atag_offset = 0x100, /* match u-boot bi_boot_params */ .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index fde6b4c873c4..e7dec589f014 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -205,6 +205,7 @@ static void __init h5000_init(void) MACHINE_START(H5400, "HP iPAQ H5000") .atag_offset = 0x100, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index 26d069a9f900..2962de898da9 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -160,6 +160,7 @@ static void __init himalaya_init(void) MACHINE_START(HIMALAYA, "HTC Himalaya") .atag_offset = 0x100, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 3fa929d4a4f5..b83b95a29503 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -681,11 +681,9 @@ static struct platform_device power_supply = { static struct regulator_consumer_supply bq24022_consumers[] = { { - .dev = &gpio_vbus.dev, .supply = "vbus_draw", }, { - .dev = &power_supply.dev, .supply = "ac_draw", }, }; diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 67400192ed3b..1d02eabc9c65 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -193,6 +193,7 @@ static void __init icontrol_init(void) MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .atag_offset = 0x100, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 8af1840e12cc..6ff466bd43e8 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -195,6 +195,7 @@ static void __init idp_map_io(void) MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ .map_io = idp_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 8184669dde28..56d92e5cad85 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -40,7 +40,6 @@ #define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) #ifndef __ASSEMBLY__ -# define IOMEM(x) ((void __iomem *)(x)) # define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() @@ -52,7 +51,6 @@ #else -# define IOMEM(x) x # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) @@ -337,8 +335,4 @@ extern unsigned int get_memclk_frequency_10khz(void); extern unsigned long get_clock_tick_rate(void); #endif -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define ARCH_HAS_DMA_SET_COHERENT_MASK -#endif - #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h index fdca3be47d9b..cd78b7fe3567 100644 --- a/arch/arm/mach-pxa/include/mach/io.h +++ b/arch/arm/mach-pxa/include/mach/io.h @@ -6,8 +6,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include <mach/hardware.h> - #define IO_SPACE_LIMIT 0xffffffff /* @@ -15,6 +13,5 @@ * drivers out there that might just work if we fake them... */ #define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 32975adf3ca4..8765782dd955 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -100,7 +100,7 @@ */ #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO) -#define NR_IRQS (IRQ_BOARD_START) +#define PXA_NR_IRQS (IRQ_BOARD_START) #ifndef __ASSEMBLY__ struct irq_data; diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 4c2d11cd824d..1bfc4e822a41 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -13,6 +13,8 @@ #ifndef ASM_ARCH_MAINSTONE_H #define ASM_ARCH_MAINSTONE_H +#include <mach/irqs.h> + #define MST_ETH_PHYS PXA_CS4_PHYS #define MST_FPGA_PHYS PXA_CS2_PHYS diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c index 8b9c17142d5a..06b060025d11 100644 --- a/arch/arm/mach-pxa/leds-idp.c +++ b/arch/arm/mach-pxa/leds-idp.c @@ -16,7 +16,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/pxa25x.h> #include <mach/idp.h> diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c index e26d5efe1969..0bd85c884a7c 100644 --- a/arch/arm/mach-pxa/leds-lubbock.c +++ b/arch/arm/mach-pxa/leds-lubbock.c @@ -15,7 +15,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/pxa25x.h> #include <mach/lubbock.h> diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c index db4af5eee8b2..4058ab340fe6 100644 --- a/arch/arm/mach-pxa/leds-mainstone.c +++ b/arch/arm/mach-pxa/leds-mainstone.c @@ -14,7 +14,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/pxa27x.h> #include <mach/mainstone.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6ebd276aebeb..6bb3f47b1f14 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -223,6 +223,7 @@ static struct resource sa1111_resources[] = { static struct sa1111_platform_data sa1111_info = { .irq_base = LUBBOCK_SA1111_IRQ_BASE, + .disable_devs = SA1111_DEVID_SAC, }; static struct platform_device sa1111_device = { diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 5e26f3e93fdd..8de0651d7efb 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include <mach/pxa27x.h> #include <mach/magician.h> @@ -579,11 +580,9 @@ static struct platform_device power_supply = { static struct regulator_consumer_supply bq24022_consumers[] = { { - .dev = &gpio_vbus.dev, .supply = "vbus_draw", }, { - .dev = &power_supply.dev, .supply = "ac_draw", }, }; diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 29b62afc6f7c..b0a842887780 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/syscore_ops.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index e80a3db735c2..061d57009cee 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -758,6 +758,7 @@ MACHINE_START(MIOA701, "MIO A701") .atag_offset = 0x100, .restart_mode = 's', .map_io = &pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 169bf8f97af0..152efbf093f6 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -95,6 +95,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C") .atag_offset = 0x220100, .timer = &pxa_timer, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = mp900c_init, diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1fa80f4f80c8..31e0433d83ba 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -344,6 +344,7 @@ static void __init palmld_init(void) MACHINE_START(PALMLD, "Palm LifeDrive") .atag_offset = 0x100, .map_io = palmld_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 5ba14316bd9c..0f6bd4fcfa3b 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -205,6 +205,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = palmt5_reserve, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 29b51b40f09d..e2d97eed07a7 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -539,6 +539,7 @@ static void __init palmtc_init(void) MACHINE_START(PALMTC, "Palm Tungsten|C") .atag_offset = 0x100, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 5ebf49acb827..c054827c567f 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -358,6 +358,7 @@ static void __init palmte2_init(void) MACHINE_START(PALMTE2, "Palm Tungsten|E2") .atag_offset = 0x100, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index ec8249156c08..fbdebee39a53 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -448,6 +448,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = treo_reserve, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, @@ -461,6 +462,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .atag_offset = 0x100, .map_io = pxa27x_map_io, .reserve = treo_reserve, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 6170d76dfba8..9507605ed547 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -366,6 +366,7 @@ static void __init palmtx_init(void) MACHINE_START(PALMTX, "Palm T|X") .atag_offset = 0x100, .map_io = palmtx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index b2dff9d415eb..a97b59965bb9 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -401,6 +401,7 @@ static void __init palmz72_init(void) MACHINE_START(PALMZ72, "Palm Zire72") .atag_offset = 0x100, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 744baee12c0c..89d98c832189 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -34,7 +34,6 @@ #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 868270421b8c..f8ec85450c42 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/device.h> +#include <linux/io.h> #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 40bb16501d86..17cbc0c7bdb8 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/io.h> #include <mach/pxa300.h> diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 8d614ecd8e99..6dc99d4f2dc6 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/io.h> #include <mach/pxa320.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 1570d457fea3..dffb7e813d98 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -31,6 +31,7 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/smemc.h> +#include <mach/irqs.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 22818c7694a8..5905ed130e94 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -43,6 +43,8 @@ #include <linux/regulator/consumer.h> #include <linux/delay.h> +#include <asm/system_info.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -1090,6 +1092,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .atag_offset = 0x100, .init_machine = raumfeld_controller_init, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, @@ -1102,6 +1105,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .atag_offset = 0x100, .init_machine = raumfeld_connector_init, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, @@ -1114,6 +1118,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .atag_offset = 0x100, .init_machine = raumfeld_speaker_init, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index c8497b00cdfe..b4528899ef08 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -9,6 +9,7 @@ #include <linux/gpio.h> #include <linux/io.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <mach/regs-ost.h> #include <mach/reset.h> diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 0fe354efb931..86c95a5d8533 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -598,6 +598,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ .atag_offset = 0x100, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 30989baf7f2a..bdf4cb88ca0a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -24,6 +24,7 @@ #include <linux/leds.h> #include <linux/suspend.h> #include <linux/gpio.h> +#include <linux/io.h> #include <asm/mach-types.h> #include <mach/pm.h> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index abf355d0c92f..df2ab0fb2ace 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, @@ -997,6 +998,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, @@ -1010,6 +1012,7 @@ MACHINE_START(AKITA, "SHARP Akita") .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index b0656e158d90..4cd645e29b64 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -152,7 +152,7 @@ static struct platform_device sht15 = { static struct regulator_consumer_supply stargate2_sensor_3_con[] = { { - .dev = &sht15.dev, + .dev_name = "sht15", .supply = "vcc", }, }; @@ -1006,6 +1006,7 @@ static void __init stargate2_init(void) #ifdef CONFIG_MACH_INTELMOTE2 MACHINE_START(INTELMOTE2, "IMOTE 2") .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 9fb38e80e076..736bfdc50ee6 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -491,6 +491,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ .atag_offset = 0x100, .map_io = pxa3xx_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index b503049d6d26..3d6c9bd90de6 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -22,6 +22,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> #include <mach/regs-ost.h> +#include <mach/irqs.h> /* * This is PXA's sched_clock implementation. This has a resolution diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 0f30af617d8f..2b6ac00b2cd9 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .atag_offset = 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, @@ -569,6 +570,7 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .atag_offset = 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 023d6ca789de..130379fb9d0f 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -57,6 +57,7 @@ #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/sizes.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -994,6 +995,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ .atag_offset = 0x100, .map_io = viper_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = viper_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 1f5cfa96f6d6..c57ab636ea9c 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -718,6 +718,7 @@ static void __init vpac270_init(void) MACHINE_START(VPAC270, "Voipac PXA270") .atag_offset = 0x100, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 4bbe9a36fe74..4275713ccd10 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -182,6 +182,7 @@ MACHINE_START(XCEP, "Iskratel XCEP") .atag_offset = 0x100, .init_machine = xcep_init, .map_io = pxa25x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index b6476848b561..fa8619970841 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -721,6 +721,7 @@ static void __init z2_init(void) MACHINE_START(ZIPIT2, "Zipit Z2") .atag_offset = 0x100, .map_io = pxa27x_map_io, + .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index a4dd1c347050..af3d4f7646d7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -32,6 +32,7 @@ #include <asm/mach-types.h> #include <asm/suspend.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index acd329afc3ac..45868bb43cbd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -33,7 +33,6 @@ #include <linux/clkdev.h> #include <linux/mtd/physmap.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/leds.h> diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index eb55f05bef3a..57d9efba2956 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h index 8a638d15797f..281e71c97525 100644 --- a/arch/arm/mach-realview/include/mach/hardware.h +++ b/arch/arm/mach-realview/include/mach/hardware.h @@ -37,6 +37,6 @@ #else #define IO_ADDRESS(x) (x) #endif -#define __io_address(n) __io(IO_ADDRESS(n)) +#define __io_address(n) IOMEM(IO_ADDRESS(n)) #endif diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h deleted file mode 100644 index f05bcdf605d8..000000000000 --- a/arch/arm/mach-realview/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index dfa405c0cfde..992e28b4ae9a 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := dma.o fiq.o irq.o riscpc.o +obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o obj-m := obj-n := obj- := diff --git a/arch/arm/kernel/ecard.c b/arch/arm/mach-rpc/ecard.c index 1651d4950744..b91bc87b3dcf 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -42,6 +42,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/kthread.h> +#include <linux/irq.h> #include <linux/io.h> #include <asm/dma.h> @@ -54,10 +55,6 @@ #include "ecard.h" -#ifndef CONFIG_ARCH_RPC -#define HAVE_EXPMASK -#endif - struct ecard_request { void (*fn)(struct ecard_request *); ecard_t *ec; @@ -77,9 +74,6 @@ struct expcard_blacklist { static ecard_t *cards; static ecard_t *slot_to_expcard[MAX_ECARDS]; static unsigned int ectcr; -#ifdef HAS_EXPMASK -static unsigned int have_expmask; -#endif /* List of descriptions of cards which don't have an extended * identification, or chunk directories containing a description. @@ -391,22 +385,10 @@ int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) static void ecard_def_irq_enable(ecard_t *ec, int irqnr) { -#ifdef HAS_EXPMASK - if (irqnr < 4 && have_expmask) { - have_expmask |= 1 << irqnr; - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } -#endif } static void ecard_def_irq_disable(ecard_t *ec, int irqnr) { -#ifdef HAS_EXPMASK - if (irqnr < 4 && have_expmask) { - have_expmask &= ~(1 << irqnr); - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } -#endif } static int ecard_def_irq_pending(ecard_t *ec) @@ -446,7 +428,7 @@ static expansioncard_ops_t ecard_default_ops = { */ static void ecard_irq_unmask(struct irq_data *d) { - ecard_t *ec = slot_to_ecard(d->irq - 32); + ecard_t *ec = irq_data_get_irq_chip_data(d); if (ec) { if (!ec->ops) @@ -462,7 +444,7 @@ static void ecard_irq_unmask(struct irq_data *d) static void ecard_irq_mask(struct irq_data *d) { - ecard_t *ec = slot_to_ecard(d->irq - 32); + ecard_t *ec = irq_data_get_irq_chip_data(d); if (ec) { if (!ec->ops) @@ -579,7 +561,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc) for (ec = cards; ec; ec = ec->next) { int pending; - if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8) + if (!ec->claimed || !ec->irq || ec->slot_no == 8) continue; if (ec->ops && ec->ops->irqpending) @@ -598,83 +580,6 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc) ecard_check_lockup(desc); } -#ifdef HAS_EXPMASK -static unsigned char priority_masks[] = -{ - 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff -}; - -static unsigned char first_set[] = -{ - 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, - 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00 -}; - -static void -ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc) -{ - const unsigned int statusmask = 15; - unsigned int status; - - status = __raw_readb(EXPMASK_STATUS) & statusmask; - if (status) { - unsigned int slot = first_set[status]; - ecard_t *ec = slot_to_ecard(slot); - - if (ec->claimed) { - /* - * this ugly code is so that we can operate a - * prioritorising system: - * - * Card 0 highest priority - * Card 1 - * Card 2 - * Card 3 lowest priority - * - * Serial cards should go in 0/1, ethernet/scsi in 2/3 - * otherwise you will lose serial data at high speeds! - */ - generic_handle_irq(ec->irq); - } else { - printk(KERN_WARNING "card%d: interrupt from unclaimed " - "card???\n", slot); - have_expmask &= ~(1 << slot); - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } - } else - printk(KERN_WARNING "Wild interrupt from backplane (masks)\n"); -} - -static int __init ecard_probeirqhw(void) -{ - ecard_t *ec; - int found; - - __raw_writeb(0x00, EXPMASK_ENABLE); - __raw_writeb(0xff, EXPMASK_STATUS); - found = (__raw_readb(EXPMASK_STATUS) & 15) == 0; - __raw_writeb(0xff, EXPMASK_ENABLE); - - if (found) { - printk(KERN_DEBUG "Expansion card interrupt " - "management hardware found\n"); - - /* for each card present, set a bit to '1' */ - have_expmask = 0x80000000; - - for (ec = cards; ec; ec = ec->next) - have_expmask |= 1 << ec->slot_no; - - __raw_writeb(have_expmask, EXPMASK_ENABLE); - } - - return found; -} -#else -#define ecard_irqexp_handler NULL -#define ecard_probeirqhw() (0) -#endif - static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) { void __iomem *address = NULL; @@ -806,8 +711,8 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) ec->slot_no = slot; ec->easi = type == ECARD_EASI; - ec->irq = NO_IRQ; - ec->fiq = NO_IRQ; + ec->irq = 0; + ec->fiq = 0; ec->dma = NO_DMA; ec->ops = &ecard_default_ops; @@ -978,8 +883,7 @@ EXPORT_SYMBOL(ecardm_iomap); * If bit 1 of the first byte of the card is set, then the * card does not exist. */ -static int __init -ecard_probe(int slot, card_type_t type) +static int __init ecard_probe(int slot, unsigned irq, card_type_t type) { ecard_t **ecp; ecard_t *ec; @@ -1033,18 +937,18 @@ ecard_probe(int slot, card_type_t type) break; } + ec->irq = irq; + /* * hook the interrupt handlers */ if (slot < 8) { - ec->irq = 32 + slot; irq_set_chip_and_handler(ec->irq, &ecard_chip, handle_level_irq); + irq_set_chip_data(ec->irq, ec); set_irq_flags(ec->irq, IRQF_VALID); } - if (slot == 8) - ec->irq = 11; #ifdef CONFIG_ARCH_RPC /* On RiscPC, only first two slots have DMA capability */ if (slot < 2) @@ -1074,28 +978,30 @@ ecard_probe(int slot, card_type_t type) static int __init ecard_init(void) { struct task_struct *task; - int slot, irqhw; + int slot, irqbase; + + irqbase = irq_alloc_descs(-1, 0, 8, -1); + if (irqbase < 0) + return irqbase; task = kthread_run(ecard_task, NULL, "kecardd"); if (IS_ERR(task)) { printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n", PTR_ERR(task)); + irq_free_descs(irqbase, 8); return PTR_ERR(task); } printk("Probing expansion cards\n"); for (slot = 0; slot < 8; slot ++) { - if (ecard_probe(slot, ECARD_EASI) == -ENODEV) - ecard_probe(slot, ECARD_IOC); + if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV) + ecard_probe(slot, irqbase + slot, ECARD_IOC); } - ecard_probe(8, ECARD_IOC); - - irqhw = ecard_probeirqhw(); + ecard_probe(8, 11, ECARD_IOC); - irq_set_chained_handler(IRQ_EXPANSIONCARD, - irqhw ? ecard_irqexp_handler : ecard_irq_handler); + irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler); ecard_proc_init(); diff --git a/arch/arm/kernel/ecard.h b/arch/arm/mach-rpc/ecard.h index 4642d436be2a..4642d436be2a 100644 --- a/arch/arm/kernel/ecard.h +++ b/arch/arm/mach-rpc/ecard.h diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index 050d63c74cc1..257166b21f3d 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -14,12 +14,6 @@ #include <mach/memory.h> -#ifndef __ASSEMBLY__ -#define IOMEM(x) ((void __iomem *)(unsigned long)(x)) -#else -#define IOMEM(x) x -#endif /* __ASSEMBLY__ */ - /* * What hardware must be present */ diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h index 695f4ed2e11b..707071a7ea4e 100644 --- a/arch/arm/mach-rpc/include/mach/io.h +++ b/arch/arm/mach-rpc/include/mach/io.h @@ -28,9 +28,4 @@ */ #define __io(a) (PCIO_BASE + ((a) << 2)) -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - #endif diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h index 3d2037496e38..6868e178274d 100644 --- a/arch/arm/mach-rpc/include/mach/irqs.h +++ b/arch/arm/mach-rpc/include/mach/irqs.h @@ -42,6 +42,4 @@ */ #define FIQ_START 64 -#define IRQ_TIMER IRQ_TIMER0 - #define NR_IRQS 128 diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 3d44a59fc0df..f3fa259ce01f 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -28,6 +28,7 @@ #include <asm/page.h> #include <asm/domain.h> #include <asm/setup.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -98,15 +99,9 @@ static void __init rpc_map_io(void) } static struct resource acornfb_resources[] = { - { /* VIDC */ - .start = 0x03400000, - .end = 0x035fffff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_VSYNCPULSE, - .end = IRQ_VSYNCPULSE, - .flags = IORESOURCE_IRQ, - }, + /* VIDC */ + DEFINE_RES_MEM(0x03400000, 0x00200000), + DEFINE_RES_IRQ(IRQ_VSYNCPULSE), }; static struct platform_device acornfb_device = { @@ -120,11 +115,7 @@ static struct platform_device acornfb_device = { }; static struct resource iomd_resources[] = { - { - .start = 0x03200000, - .end = 0x0320ffff, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(0x03200000, 0x10000), }; static struct platform_device iomd_device = { @@ -134,18 +125,25 @@ static struct platform_device iomd_device = { .resource = iomd_resources, }; +static struct resource iomd_kart_resources[] = { + DEFINE_RES_IRQ(IRQ_KEYBOARDRX), + DEFINE_RES_IRQ(IRQ_KEYBOARDTX), +}; + static struct platform_device kbd_device = { .name = "kart", .id = -1, .dev = { .parent = &iomd_device.dev, }, + .num_resources = ARRAY_SIZE(iomd_kart_resources), + .resource = iomd_kart_resources, }; static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = 0x03010fe0, - .irq = 10, + .irq = IRQ_SERIALPORT, .uartclk = 1843200, .regshift = 2, .iotype = UPIO_MEM, @@ -167,21 +165,9 @@ static struct pata_platform_info pata_platform_data = { }; static struct resource pata_resources[] = { - [0] = { - .start = 0x030107c0, - .end = 0x030107df, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x03010fd8, - .end = 0x03010fdb, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_HARDDISK, - .end = IRQ_HARDDISK, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x030107c0, 0x20), + DEFINE_RES_MEM(0x03010fd8, 0x04), + DEFINE_RES_IRQ(IRQ_HARDDISK), }; static struct platform_device pata_device = { diff --git a/arch/arm/common/time-acorn.c b/arch/arm/mach-rpc/time.c index deeed561b168..581fca934bb3 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/mach-rpc/time.c @@ -85,7 +85,7 @@ static struct irqaction ioc_timer_irq = { static void __init ioc_timer_init(void) { ioctime_init(); - setup_irq(IRQ_TIMER, &ioc_timer_irq); + setup_irq(IRQ_TIMER0, &ioc_timer_irq); } struct sys_timer ioc_timer = { diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h new file mode 100644 index 000000000000..c2f596e7bc2d --- /dev/null +++ b/arch/arm/mach-s3c24xx/common.h @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S3C24XX SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H +#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ + +void s3c2410_restart(char mode, const char *cmd); +void s3c244x_restart(char mode, const char *cmd); + +#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h index 118749f37c4c..5dd1db4e2677 100644 --- a/arch/arm/mach-s3c24xx/include/mach/io.h +++ b/arch/arm/mach-s3c24xx/include/mach/io.h @@ -208,9 +208,4 @@ DECLARE_IO(int,l,"") #define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) #define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - #endif diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 061b6bb1a557..a3c5cb086ee2 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -30,6 +30,7 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <plat/cpu-freq.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index c6eac9871093..d4bc7f960bbb 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -31,6 +31,7 @@ #include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <plat/cpu-freq.h> diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 0e9a71c90ed7..7743fade50df 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -43,6 +43,7 @@ #include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index b7778a9dafaf..ab648ad8fa50 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index d15852f642b7..6f74118f60c6 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -23,6 +23,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c index 2119ca6a73bc..b9d6d4f92c03 100644 --- a/arch/arm/mach-s3c24xx/simtec-nor.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -35,9 +35,7 @@ static void simtec_nor_vpp(struct platform_device *pdev, int vpp) { unsigned int val; - unsigned long flags; - local_irq_save(flags); val = __raw_readb(BAST_VA_CTRL3); printk(KERN_DEBUG "%s(%d)\n", __func__, vpp); @@ -48,7 +46,6 @@ static void simtec_nor_vpp(struct platform_device *pdev, int vpp) val &= ~BAST_CPLD_CTRL3_ROMWEN; __raw_writeb(val, BAST_VA_CTRL3); - local_irq_restore(flags); } static struct physmap_flash_data simtec_nor_pdata = { diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index bee7dcd4df7c..b313380342a5 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -29,6 +29,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/vic.h> +#include <asm/system_misc.h> #include <mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h deleted file mode 100644 index de5716dbbd65..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c64xxinclude/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C64XX based - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index b6a67728cc88..0ace108c3e3d 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -17,6 +17,8 @@ #include <linux/mfd/wm831x/gpio.h> #include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/machine.h> + #include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> @@ -153,6 +155,14 @@ static const struct i2c_board_info wm1259_devs[] = { }, }; +static struct regulator_init_data wm8994_ldo1 = { + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data wm8994_ldo2 = { + .supply_regulator = "WALLVDD", +}; + static struct wm8994_pdata wm8994_pdata = { .gpio_base = CODEC_GPIO_BASE, .gpio_defaults = { @@ -160,8 +170,8 @@ static struct wm8994_pdata wm8994_pdata = { }, .irq_base = CODEC_IRQ_BASE, .ldo = { - { .supply = "WALLVDD" }, - { .supply = "WALLVDD" }, + { .init_data = &wm8994_ldo1, }, + { .init_data = &wm8994_ldo2, }, }, }; diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 9143f8b19962..6e6a0a9d6778 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -27,6 +27,7 @@ #include <asm/irq.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h deleted file mode 100644 index a3e095c02fb5..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/io.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/io.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S5P64X0 based - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index ff71e2d467c6..621908658861 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -27,6 +27,7 @@ #include <asm/irq.h> #include <asm/proc-fns.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-s5pc100/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h deleted file mode 100644 index 819acf5eaf89..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S5PC100 systems - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h deleted file mode 100644 index 5ab9d560bc86..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/io.h - * - * Default IO routines for S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H __FILE__ - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index ed7408d3216c..60b97ec01676 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 0c4b76ab4d8e..375d3f779a88 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -15,14 +15,16 @@ #include <linux/errno.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> #include <linux/mm.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> @@ -36,17 +38,18 @@ #include <asm/mach/serial_sa1100.h> #include <mach/assabet.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" #define ASSABET_BCR_DB1110 \ - (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \ + (ASSABET_BCR_SPK_OFF | \ ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \ ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \ ASSABET_BCR_IRDA_MD0) #define ASSABET_BCR_DB1111 \ - (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \ + (ASSABET_BCR_SPK_OFF | \ ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \ ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \ ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \ @@ -69,31 +72,10 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) EXPORT_SYMBOL(ASSABET_BCR_frob); -static void assabet_backlight_power(int on) -{ -#ifndef ASSABET_PAL_VIDEO - if (on) - ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON); - else -#endif - ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); -} - -/* - * Turn on/off the backlight. When turning the backlight on, - * we wait 500us after turning it on so we don't cause the - * supplies to droop when we enable the LCD controller (and - * cause a hard reset.) - */ -static void assabet_lcd_power(int on) +static void assabet_ucb1x00_reset(enum ucb1x00_reset state) { -#ifndef ASSABET_PAL_VIDEO - if (on) { - ASSABET_BCR_set(ASSABET_BCR_LCD_ON); - udelay(500); - } else -#endif - ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); + if (state == UCB_RST_PROBE) + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); } @@ -152,15 +134,8 @@ static struct flash_platform_data assabet_flash_data = { }; static struct resource assabet_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M), }; @@ -199,18 +174,126 @@ static struct irda_platform_data assabet_irda_data = { .set_speed = assabet_irda_set_speed, }; +static struct ucb1x00_plat_data assabet_ucb1x00_data = { + .reset = assabet_ucb1x00_reset, + .gpio_base = -1, +}; + static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec_pdata = &assabet_ucb1x00_data, +}; + +static void assabet_lcd_set_visual(u32 visual) +{ + u_int is_true_color = visual == FB_VISUAL_TRUECOLOR; + + if (machine_is_assabet()) { +#if 1 // phase 4 or newer Assabet's + if (is_true_color) + ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); + else + ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); +#else + // older Assabet's + if (is_true_color) + ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); + else + ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); +#endif + } +} + +#ifndef ASSABET_PAL_VIDEO +static void assabet_lcd_backlight_power(int on) +{ + if (on) + ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON); + else + ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); +} + +/* + * Turn on/off the backlight. When turning the backlight on, we wait + * 500us after turning it on so we don't cause the supplies to droop + * when we enable the LCD controller (and cause a hard reset.) + */ +static void assabet_lcd_power(int on) +{ + if (on) { + ASSABET_BCR_set(ASSABET_BCR_LCD_ON); + udelay(500); + } else + ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); +} + +/* + * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually + * takes an RGB666 signal, but we provide it with an RGB565 signal + * instead (def_rgb_16). + */ +static struct sa1100fb_mach_info lq039q2ds54_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 61, .upper_margin = 3, + .right_margin = 9, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .backlight_power = assabet_lcd_backlight_power, + .lcd_power = assabet_lcd_power, + .set_visual = assabet_lcd_set_visual, +}; +#else +static void assabet_pal_backlight_power(int on) +{ + ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); +} + +static void assabet_pal_power(int on) +{ + ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); +} + +static struct sa1100fb_mach_info pal_info = { + .pixclock = 67797, .bpp = 16, + .xres = 640, .yres = 512, + + .hsync_len = 64, .vsync_len = 6, + .left_margin = 125, .upper_margin = 70, + .right_margin = 115, .lower_margin = 36, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), + + .backlight_power = assabet_pal_backlight_power, + .lcd_power = assabet_pal_power, + .set_visual = assabet_lcd_set_visual, }; +#endif + +#ifdef CONFIG_ASSABET_NEPONSET +static struct resource neponset_resources[] = { + DEFINE_RES_MEM(0x10000000, 0x08000000), + DEFINE_RES_MEM(0x18000000, 0x04000000), + DEFINE_RES_MEM(0x40000000, SZ_8K), + DEFINE_RES_IRQ(IRQ_GPIO25), +}; +#endif static void __init assabet_init(void) { /* * Ensure that the power supply is in "high power" mode. */ - GPDR |= GPIO_GPIO16; GPSR = GPIO_GPIO16; + GPDR |= GPIO_GPIO16; /* * Ensure that these pins are set as outputs and are driving @@ -218,8 +301,16 @@ static void __init assabet_init(void) * the WS latch in the CPLD, and we don't float causing * excessive power drain. --rmk */ - GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; + GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; + + /* + * Also set GPIO27 as an output; this is used to clock UART3 + * via the FPGA and as otherwise has no pullups or pulldowns, + * so stop it floating. + */ + GPCR = GPIO_GPIO27; + GPDR |= GPIO_GPIO27; /* * Set up registers for sleep mode. @@ -231,8 +322,7 @@ static void __init assabet_init(void) PPDR |= PPC_TXD3 | PPC_TXD1; PPSR |= PPC_TXD3 | PPC_TXD1; - sa1100fb_lcd_power = assabet_lcd_power; - sa1100fb_backlight_power = assabet_backlight_power; + sa11x0_ppc_configure_mcp(); if (machine_has_neponset()) { /* @@ -246,9 +336,17 @@ static void __init assabet_init(void) #ifndef CONFIG_ASSABET_NEPONSET printk( "Warning: Neponset detected but full support " "hasn't been configured in the kernel\n" ); +#else + platform_device_register_simple("neponset", 0, + neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } +#ifndef ASSABET_PAL_VIDEO + sa11x0_register_lcd(&lq039q2ds54_info); +#else + sa11x0_register_lcd(&pal_video); +#endif sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); @@ -412,21 +510,8 @@ static void __init assabet_map_io(void) */ Ser1SDCR0 |= SDCR0_SUS; - if (machine_has_neponset()) { -#ifdef CONFIG_ASSABET_NEPONSET - extern void neponset_map_io(void); - - /* - * We map Neponset registers even if it isn't present since - * many drivers will try to probe their stuff (and fail). - * This is still more friendly than a kernel paging request - * crash. - */ - neponset_map_io(); -#endif - } else { + if (!machine_has_neponset()) sa1100_register_uart_fns(&assabet_port_fns); - } /* * When Neponset is attached, the first UART should be @@ -449,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet") .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b07a2c024cb7..e0f0c030258c 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -39,20 +39,27 @@ #include "generic.h" static struct resource sa1111_resources[] = { - [0] = { - .start = BADGE4_SA1111_BASE, - .end = BADGE4_SA1111_BASE + 0x00001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = BADGE4_IRQ_GPIO_SA1111, - .end = BADGE4_IRQ_GPIO_SA1111, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000), + [1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111), }; +static int badge4_sa1111_enable(void *data, unsigned devid) +{ + if (devid == SA1111_DEVID_USB) + badge4_set_5V(BADGE4_5V_USB, 1); + return 0; +} + +static void badge4_sa1111_disable(void *data, unsigned devid) +{ + if (devid == SA1111_DEVID_USB) + badge4_set_5V(BADGE4_5V_USB, 0); +} + static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, + .enable = badge4_sa1111_enable, + .disable = badge4_sa1111_disable, }; static u64 sa1111_dmamask = 0xffffffffUL; @@ -121,11 +128,8 @@ static struct flash_platform_data badge4_flash_data = { .nr_parts = ARRAY_SIZE(badge4_partitions), }; -static struct resource badge4_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource badge4_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M); static int five_v_on __initdata = 0; @@ -269,11 +273,6 @@ static struct map_desc badge4_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x10000000), .length = 0x00100000, .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, - .type = MT_DEVICE } }; @@ -304,6 +303,7 @@ static void __init badge4_map_io(void) MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") .atag_offset = 0x100, .map_io = badge4_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, #ifdef CONFIG_SA1111 diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 11bb6d0b9be3..4a61f60e0502 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -18,7 +18,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -30,14 +29,11 @@ #include <mach/cerf.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" static struct resource cerfuart2_resources[] = { - [0] = { - .start = 0x80030000, - .end = 0x8003ffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(0x80030000, SZ_64K), }; static struct platform_device cerfuart2_device = { @@ -87,11 +83,8 @@ static struct flash_platform_data cerf_flash_data = { .nr_parts = ARRAY_SIZE(cerf_partitions), }; -static struct resource cerf_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource cerf_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init cerf_init_irq(void) { @@ -128,6 +121,7 @@ static struct mcp_plat_data cerf_mcp_data = { static void __init cerf_init(void) { + sa11x0_ppc_configure_mcp(); platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); sa11x0_register_mcp(&cerf_mcp_data); @@ -136,6 +130,7 @@ static void __init cerf_init(void) MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") /* Maintainer: support@intrinsyc.com */ .map_io = cerf_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index fd5652118ed1..c7f418b0cde9 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -22,15 +22,17 @@ #include <linux/tty.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/timer.h> #include <linux/gpio.h> #include <linux/pda_power.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/page.h> #include <asm/setup.h> #include <mach/collie.h> @@ -44,15 +46,12 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/locomo.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" static struct resource collie_scoop_resources[] = { - [0] = { - .start = 0x40800000, - .end = 0x40800fff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(0x40800000, SZ_4K), }; static struct scoop_config collie_scoop_setup = { @@ -85,10 +84,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; +static struct ucb1x00_plat_data collie_ucb1x00_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .gpio_base = COLLIE_TC35143_GPIO_BASE, + .codec_pdata = &collie_ucb1x00_data, }; /* @@ -221,16 +224,8 @@ device_initcall(collie_uart_init); static struct resource locomo_resources[] = { - [0] = { - .start = 0x40000000, - .end = 0x40001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIO25, - .end = IRQ_GPIO25, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), + [1] = DEFINE_RES_IRQ(IRQ_GPIO25), }; static struct locomo_platform_data locomo_info = { @@ -303,11 +298,25 @@ static struct flash_platform_data collie_flash_data = { }; static struct resource collie_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), +}; + +static struct sa1100fb_mach_info collie_lcd_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 11, .upper_margin = 2, + .right_margin = 30, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + +#ifdef CONFIG_BACKLIGHT_LOCOMO + .lcd_power = locomolcd_power +#endif }; static void __init collie_init(void) @@ -341,6 +350,10 @@ static void __init collie_init(void) collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN); collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN); + + sa11x0_ppc_configure_mcp(); + + platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -348,6 +361,7 @@ static void __init collie_init(void) printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); } + sa11x0_register_lcd(&collie_lcd_info); sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); sa11x0_register_mcp(&collie_mcp_data); @@ -383,6 +397,7 @@ static void __init collie_map_io(void) MACHINE_START(COLLIE, "Sharp-Collie") .map_io = collie_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c deleted file mode 100644 index ad660350c296..000000000000 --- a/arch/arm/mach-sa1100/dma.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * arch/arm/mach-sa1100/dma.c - * - * Support functions for the SA11x0 internal DMA channels. - * - * Copyright (C) 2000, 2001 by Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/errno.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> - - -#undef DEBUG -#ifdef DEBUG -#define DPRINTK( s, arg... ) printk( "dma<%p>: " s, regs , ##arg ) -#else -#define DPRINTK( x... ) -#endif - - -typedef struct { - const char *device_id; /* device name */ - u_long device; /* this channel device, 0 if unused*/ - dma_callback_t callback; /* to call when DMA completes */ - void *data; /* ... with private data ptr */ -} sa1100_dma_t; - -static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; - -static DEFINE_SPINLOCK(dma_list_lock); - - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - dma_regs_t *dma_regs = dev_id; - sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7); - int status = dma_regs->RdDCSR; - - if (status & (DCSR_ERROR)) { - printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id); - dma_regs->ClrDCSR = DCSR_ERROR; - } - - dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB); - if (dma->callback) { - if (status & DCSR_DONEA) - dma->callback(dma->data); - if (status & DCSR_DONEB) - dma->callback(dma->data); - } - return IRQ_HANDLED; -} - - -/** - * sa1100_request_dma - allocate one of the SA11x0's DMA channels - * @device: The SA11x0 peripheral targeted by this request - * @device_id: An ascii name for the claiming device - * @callback: Function to be called when the DMA completes - * @data: A cookie passed back to the callback function - * @dma_regs: Pointer to the location of the allocated channel's identifier - * - * This function will search for a free DMA channel and returns the - * address of the hardware registers for that channel as the channel - * identifier. This identifier is written to the location pointed by - * @dma_regs. The list of possible values for @device are listed into - * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum. - * - * Note that reading from a port and writing to the same port are - * actually considered as two different streams requiring separate - * DMA registrations. - * - * The @callback function is called from interrupt context when one - * of the two possible DMA buffers in flight has terminated. That - * function has to be small and efficient while posponing more complex - * processing to a lower priority execution context. - * - * If no channels are available, or if the desired @device is already in - * use by another DMA channel, then an error code is returned. This - * function must be called before any other DMA calls. - **/ - -int sa1100_request_dma (dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **dma_regs) -{ - sa1100_dma_t *dma = NULL; - dma_regs_t *regs; - int i, err; - - *dma_regs = NULL; - - err = 0; - spin_lock(&dma_list_lock); - for (i = 0; i < SA1100_DMA_CHANNELS; i++) { - if (dma_chan[i].device == device) { - err = -EBUSY; - break; - } else if (!dma_chan[i].device && !dma) { - dma = &dma_chan[i]; - } - } - if (!err) { - if (dma) - dma->device = device; - else - err = -ENOSR; - } - spin_unlock(&dma_list_lock); - if (err) - return err; - - i = dma - dma_chan; - regs = (dma_regs_t *)&DDAR(i); - err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED, - device_id, regs); - if (err) { - printk(KERN_ERR - "%s: unable to request IRQ %d for %s\n", - __func__, IRQ_DMA0 + i, device_id); - dma->device = 0; - return err; - } - - *dma_regs = regs; - dma->device_id = device_id; - dma->callback = callback; - dma->data = data; - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - regs->DDAR = device; - - return 0; -} - - -/** - * sa1100_free_dma - free a SA11x0 DMA channel - * @regs: identifier for the channel to free - * - * This clears all activities on a given DMA channel and releases it - * for future requests. The @regs identifier is provided by a - * successful call to sa1100_request_dma(). - **/ - -void sa1100_free_dma(dma_regs_t *regs) -{ - int i; - - for (i = 0; i < SA1100_DMA_CHANNELS; i++) - if (regs == (dma_regs_t *)&DDAR(i)) - break; - if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __func__); - return; - } - - if (!dma_chan[i].device) { - printk(KERN_ERR "%s: Trying to free free DMA\n", __func__); - return; - } - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - free_irq(IRQ_DMA0 + i, regs); - dma_chan[i].device = 0; -} - - -/** - * sa1100_start_dma - submit a data buffer for DMA - * @regs: identifier for the channel to use - * @dma_ptr: buffer physical (or bus) start address - * @size: buffer size - * - * This function hands the given data buffer to the hardware for DMA - * access. If another buffer is already in flight then this buffer - * will be queued so the DMA engine will switch to it automatically - * when the previous one is done. The DMA engine is actually toggling - * between two buffers so at most 2 successful calls can be made before - * one of them terminates and the callback function is called. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - * - * The @size must not be larger than %MAX_DMA_SIZE. If a given buffer - * is larger than that then it's the caller's responsibility to split - * it into smaller chunks and submit them separately. If this is the - * case then a @size of %CUT_DMA_SIZE is recommended to avoid ending - * up with too small chunks. The callback function can be used to chain - * submissions of buffer chunks. - * - * Error return values: - * %-EOVERFLOW: Given buffer size is too big. - * %-EBUSY: Both DMA buffers are already in use. - * %-EAGAIN: Both buffers were busy but one of them just completed - * but the interrupt handler has to execute first. - * - * This function returs 0 on success. - **/ - -int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size) -{ - unsigned long flags; - u_long status; - int ret; - - if (dma_ptr & 3) - printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n", - (unsigned long)dma_ptr); - - if (size > MAX_DMA_SIZE) - return -EOVERFLOW; - - local_irq_save(flags); - status = regs->RdDCSR; - - /* If both DMA buffers are started, there's nothing else we can do. */ - if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) { - DPRINTK("start: st %#x busy\n", status); - ret = -EBUSY; - goto out; - } - - if (((status & DCSR_BIU) && (status & DCSR_STRTB)) || - (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) { - if (status & DCSR_DONEA) { - /* give a chance for the interrupt to be processed */ - ret = -EAGAIN; - goto out; - } - regs->DBSA = dma_ptr; - regs->DBTA = size; - regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN; - DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size); - } else { - if (status & DCSR_DONEB) { - /* give a chance for the interrupt to be processed */ - ret = -EAGAIN; - goto out; - } - regs->DBSB = dma_ptr; - regs->DBTB = size; - regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN; - DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size); - } - ret = 0; - -out: - local_irq_restore(flags); - return ret; -} - - -/** - * sa1100_get_dma_pos - return current DMA position - * @regs: identifier for the channel to use - * - * This function returns the current physical (or bus) address for the - * given DMA channel. If the channel is running i.e. not in a stopped - * state then the caller must disable interrupts prior calling this - * function and process the returned value before re-enabling them to - * prevent races with the completion interrupt handler and the callback - * function. The validation of the returned value is the caller's - * responsibility as well -- the hardware seems to return out of range - * values when the DMA engine completes a buffer. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs) -{ - int status; - - /* - * We must determine whether buffer A or B is active. - * Two possibilities: either we are in the middle of - * a buffer, or the DMA controller just switched to the - * next toggle but the interrupt hasn't been serviced yet. - * The former case is straight forward. In the later case, - * we'll do like if DMA is just at the end of the previous - * toggle since all registers haven't been reset yet. - * This goes around the edge case and since we're always - * a little behind anyways it shouldn't make a big difference. - * If DMA has been stopped prior calling this then the - * position is exact. - */ - status = regs->RdDCSR; - if ((!(status & DCSR_BIU) && (status & DCSR_STRTA)) || - ( (status & DCSR_BIU) && !(status & DCSR_STRTB))) - return regs->DBSA; - else - return regs->DBSB; -} - - -/** - * sa1100_reset_dma - reset a DMA channel - * @regs: identifier for the channel to use - * - * This function resets and reconfigure the given DMA channel. This is - * particularly useful after a sleep/wakeup event. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -void sa1100_reset_dma(dma_regs_t *regs) -{ - int i; - - for (i = 0; i < SA1100_DMA_CHANNELS; i++) - if (regs == (dma_regs_t *)&DDAR(i)) - break; - if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __func__); - return; - } - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - regs->DDAR = dma_chan[i].device; -} - - -EXPORT_SYMBOL(sa1100_request_dma); -EXPORT_SYMBOL(sa1100_free_dma); -EXPORT_SYMBOL(sa1100_start_dma); -EXPORT_SYMBOL(sa1100_get_dma_pos); -EXPORT_SYMBOL(sa1100_reset_dma); - diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c1ebf4a7920..7c524b4e415d 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -14,17 +14,22 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/platform_device.h> +#include <video/sa1100fb.h> + #include <asm/div64.h> -#include <mach/hardware.h> -#include <asm/system.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/irq.h> +#include <asm/system_misc.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> #include "generic.h" @@ -149,16 +154,8 @@ static void sa11x0_register_device(struct platform_device *dev, void *data) static struct resource sa11x0udc_resources[] = { - [0] = { - .start = __PREG(Ser0UDCCR), - .end = __PREG(Ser0UDCCR) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser0UDC, - .end = IRQ_Ser0UDC, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC), }; static u64 sa11x0udc_dma_mask = 0xffffffffUL; @@ -175,16 +172,8 @@ static struct platform_device sa11x0udc_device = { }; static struct resource sa11x0uart1_resources[] = { - [0] = { - .start = __PREG(Ser1UTCR0), - .end = __PREG(Ser1UTCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser1UART, - .end = IRQ_Ser1UART, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser1UART), }; static struct platform_device sa11x0uart1_device = { @@ -195,16 +184,8 @@ static struct platform_device sa11x0uart1_device = { }; static struct resource sa11x0uart3_resources[] = { - [0] = { - .start = __PREG(Ser3UTCR0), - .end = __PREG(Ser3UTCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser3UART, - .end = IRQ_Ser3UART, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser3UART), }; static struct platform_device sa11x0uart3_device = { @@ -215,16 +196,9 @@ static struct platform_device sa11x0uart3_device = { }; static struct resource sa11x0mcp_resources[] = { - [0] = { - .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser4MCP, - .end = IRQ_Ser4MCP, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K), + [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4), + [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP), }; static u64 sa11x0mcp_dma_mask = 0xffffffffUL; @@ -240,22 +214,24 @@ static struct platform_device sa11x0mcp_device = { .resource = sa11x0mcp_resources, }; +void __init sa11x0_ppc_configure_mcp(void) +{ + /* Setup the PPC unit for the MCP */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); +} + void sa11x0_register_mcp(struct mcp_plat_data *data) { sa11x0_register_device(&sa11x0mcp_device, data); } static struct resource sa11x0ssp_resources[] = { - [0] = { - .start = 0x80070000, - .end = 0x8007ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser4SSP, - .end = IRQ_Ser4SSP, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x80070000, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP), }; static u64 sa11x0ssp_dma_mask = 0xffffffffUL; @@ -272,16 +248,8 @@ static struct platform_device sa11x0ssp_device = { }; static struct resource sa11x0fb_resources[] = { - [0] = { - .start = 0xb0100000, - .end = 0xb010ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_LCD), }; static struct platform_device sa11x0fb_device = { @@ -294,6 +262,11 @@ static struct platform_device sa11x0fb_device = { .resource = sa11x0fb_resources, }; +void sa11x0_register_lcd(struct sa1100fb_mach_info *inf) +{ + sa11x0_register_device(&sa11x0fb_device, inf); +} + static struct platform_device sa11x0pcmcia_device = { .name = "sa11x0-pcmcia", .id = -1, @@ -314,23 +287,10 @@ void sa11x0_register_mtd(struct flash_platform_data *flash, } static struct resource sa11x0ir_resources[] = { - { - .start = __PREG(Ser2UTCR0), - .end = __PREG(Ser2UTCR0) + 0x24 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = __PREG(Ser2HSCR0), - .end = __PREG(Ser2HSCR0) + 0x1c - 1, - .flags = IORESOURCE_MEM, - }, { - .start = __PREG(Ser2HSCR2), - .end = __PREG(Ser2HSCR2) + 0x04 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_Ser2ICP, - .end = IRQ_Ser2ICP, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24), + DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c), + DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04), + DEFINE_RES_IRQ(IRQ_Ser2ICP), }; static struct platform_device sa11x0ir_device = { @@ -358,14 +318,37 @@ static struct platform_device sa11x0rtc_device = { .resource = sa1100_rtc_resources, }; +static struct resource sa11x0dma_resources[] = { + DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE), + DEFINE_RES_IRQ(IRQ_DMA0), + DEFINE_RES_IRQ(IRQ_DMA1), + DEFINE_RES_IRQ(IRQ_DMA2), + DEFINE_RES_IRQ(IRQ_DMA3), + DEFINE_RES_IRQ(IRQ_DMA4), + DEFINE_RES_IRQ(IRQ_DMA5), +}; + +static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device sa11x0dma_device = { + .name = "sa11x0-dma", + .id = -1, + .dev = { + .dma_mask = &sa11x0dma_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sa11x0dma_resources), + .resource = sa11x0dma_resources, +}; + static struct platform_device *sa11x0_devices[] __initdata = { &sa11x0udc_device, &sa11x0uart1_device, &sa11x0uart3_device, &sa11x0ssp_device, &sa11x0pcmcia_device, - &sa11x0fb_device, &sa11x0rtc_device, + &sa11x0dma_device, }; static int __init sa1100_init(void) @@ -376,12 +359,6 @@ static int __init sa1100_init(void) arch_initcall(sa1100_init); -void (*sa1100fb_backlight_power)(int on); -void (*sa1100fb_lcd_power)(int on); - -EXPORT_SYMBOL(sa1100fb_backlight_power); -EXPORT_SYMBOL(sa1100fb_lcd_power); - /* * Common I/O mapping: @@ -436,7 +413,7 @@ void __init sa1100_map_io(void) * the MBGNT signal false to ensure the SA1111 doesn't own the * SDRAM bus. */ -void __init sa1110_mb_disable(void) +void sa1110_mb_disable(void) { unsigned long flags; @@ -455,7 +432,7 @@ void __init sa1110_mb_disable(void) * If the system is going to use the SA-1111 DMA engines, set up * the memory bus request/grant pins. */ -void __devinit sa1110_mb_enable(void) +void sa1110_mb_enable(void) { unsigned long flags; diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 33268cf6be36..9eb3b3cd5a63 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *); mi->bank[__nr].start = (__start), \ mi->bank[__nr].size = (__size) -extern void (*sa1100fb_backlight_power)(int on); -extern void (*sa1100fb_lcd_power)(int on); - extern void sa1110_mb_enable(void); extern void sa1110_mb_disable(void); @@ -39,4 +36,8 @@ struct irda_platform_data; void sa11x0_register_irda(struct irda_platform_data *irda); struct mcp_plat_data; +void sa11x0_ppc_configure_mcp(void); void sa11x0_register_mcp(struct mcp_plat_data *data); + +struct sa1100fb_mach_info; +void sa11x0_register_lcd(struct sa1100fb_mach_info *inf); diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 1e6b3c105ba6..b2e8d0f418e0 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -14,11 +14,14 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <video/sa1100fb.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/irda.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -36,13 +39,28 @@ static void h3100_lcd_power(int enable) } } +static struct sa1100fb_mach_info h3100_lcd_info = { + .pixclock = 406977, .bpp = 4, + .xres = 320, .yres = 240, + + .hsync_len = 26, .vsync_len = 41, + .left_margin = 4, .upper_margin = 0, + .right_margin = 4, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 1, + .cmap_inverse = 1, + + .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .lcd_power = h3100_lcd_power, +}; static void __init h3100_map_io(void) { h3xxx_map_io(); - sa1100fb_lcd_power = h3100_lcd_power; - /* Older bootldrs put GPIO2-9 in alternate mode on the assumption that they are used for video */ GAFR &= ~0x000001fb; @@ -80,12 +98,15 @@ static void __init h3100_mach_init(void) { h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio)); h3xxx_mach_init(); + + sa11x0_register_lcd(&h3100_lcd_info); sa11x0_register_irda(&h3100_irda_data); } MACHINE_START(H3100, "Compaq iPAQ H3100") .atag_offset = 0x100, .map_io = h3100_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3100_mach_init, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 6b58e7460ecf..cb6659f294fe 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -14,11 +14,14 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <video/sa1100fb.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/irda.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -56,11 +59,35 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON); err1: return; } +static const struct sa1100fb_rgb h3600_rgb_16 = { + .red = { .offset = 12, .length = 4, }, + .green = { .offset = 7, .length = 4, }, + .blue = { .offset = 1, .length = 4, }, + .transp = { .offset = 0, .length = 0, }, +}; + +static struct sa1100fb_mach_info h3600_lcd_info = { + .pixclock = 174757, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 3, .vsync_len = 3, + .left_margin = 12, .upper_margin = 10, + .right_margin = 17, .lower_margin = 1, + + .cmap_static = 1, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .rgb[RGB_16] = &h3600_rgb_16, + + .lcd_power = h3600_lcd_power, +}; + + static void __init h3600_map_io(void) { h3xxx_map_io(); - - sa1100fb_lcd_power = h3600_lcd_power; } /* @@ -121,12 +148,15 @@ static void __init h3600_mach_init(void) { h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio)); h3xxx_mach_init(); + + sa11x0_register_lcd(&h3600_lcd_info); sa11x0_register_irda(&h3600_irda_data); } MACHINE_START(H3600, "Compaq iPAQ H3600") .atag_offset = 0x100, .map_io = h3600_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3600_mach_init, diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index b0784c974c2d..63150e1ffe9e 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -109,11 +109,8 @@ static struct flash_platform_data h3xxx_flash_data = { .nr_parts = ARRAY_SIZE(h3xxx_partitions), }; -static struct resource h3xxx_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource h3xxx_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); /* @@ -186,11 +183,7 @@ static struct sa1100_port_fns h3xxx_port_fns __initdata = { */ static struct resource egpio_resources[] = { - [0] = { - .start = H3600_EGPIO_PHYS, - .end = H3600_EGPIO_PHYS + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4), }; static struct htc_egpio_chip egpio_chips[] = { diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index c01bb36db940..5535475bf583 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -22,12 +22,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -35,6 +33,9 @@ #include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #include "generic.h" /********************************************************************** @@ -179,11 +180,8 @@ static struct flash_platform_data hackkit_flash_data = { .nr_parts = ARRAY_SIZE(hackkit_partitions), }; -static struct resource hackkit_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M, - .flags = IORESOURCE_MEM, -}; +static struct resource hackkit_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init hackkit_init(void) { @@ -197,6 +195,7 @@ static void __init hackkit_init(void) MACHINE_START(HACKKIT, "HackKit Cpu Board") .atag_offset = 0x100, .map_io = hackkit_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index bae8296f5dbf..3f2d1b60188c 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1590,224 +1590,9 @@ /* * Direct Memory Access (DMA) control registers - * - * Registers - * DDAR0 Direct Memory Access (DMA) Device Address Register - * channel 0 (read/write). - * DCSR0 Direct Memory Access (DMA) Control and Status - * Register channel 0 (read/write). - * DBSA0 Direct Memory Access (DMA) Buffer Start address - * register A channel 0 (read/write). - * DBTA0 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 0 (read/write). - * DBSB0 Direct Memory Access (DMA) Buffer Start address - * register B channel 0 (read/write). - * DBTB0 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 0 (read/write). - * - * DDAR1 Direct Memory Access (DMA) Device Address Register - * channel 1 (read/write). - * DCSR1 Direct Memory Access (DMA) Control and Status - * Register channel 1 (read/write). - * DBSA1 Direct Memory Access (DMA) Buffer Start address - * register A channel 1 (read/write). - * DBTA1 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 1 (read/write). - * DBSB1 Direct Memory Access (DMA) Buffer Start address - * register B channel 1 (read/write). - * DBTB1 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 1 (read/write). - * - * DDAR2 Direct Memory Access (DMA) Device Address Register - * channel 2 (read/write). - * DCSR2 Direct Memory Access (DMA) Control and Status - * Register channel 2 (read/write). - * DBSA2 Direct Memory Access (DMA) Buffer Start address - * register A channel 2 (read/write). - * DBTA2 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 2 (read/write). - * DBSB2 Direct Memory Access (DMA) Buffer Start address - * register B channel 2 (read/write). - * DBTB2 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 2 (read/write). - * - * DDAR3 Direct Memory Access (DMA) Device Address Register - * channel 3 (read/write). - * DCSR3 Direct Memory Access (DMA) Control and Status - * Register channel 3 (read/write). - * DBSA3 Direct Memory Access (DMA) Buffer Start address - * register A channel 3 (read/write). - * DBTA3 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 3 (read/write). - * DBSB3 Direct Memory Access (DMA) Buffer Start address - * register B channel 3 (read/write). - * DBTB3 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 3 (read/write). - * - * DDAR4 Direct Memory Access (DMA) Device Address Register - * channel 4 (read/write). - * DCSR4 Direct Memory Access (DMA) Control and Status - * Register channel 4 (read/write). - * DBSA4 Direct Memory Access (DMA) Buffer Start address - * register A channel 4 (read/write). - * DBTA4 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 4 (read/write). - * DBSB4 Direct Memory Access (DMA) Buffer Start address - * register B channel 4 (read/write). - * DBTB4 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 4 (read/write). - * - * DDAR5 Direct Memory Access (DMA) Device Address Register - * channel 5 (read/write). - * DCSR5 Direct Memory Access (DMA) Control and Status - * Register channel 5 (read/write). - * DBSA5 Direct Memory Access (DMA) Buffer Start address - * register A channel 5 (read/write). - * DBTA5 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 5 (read/write). - * DBSB5 Direct Memory Access (DMA) Buffer Start address - * register B channel 5 (read/write). - * DBTB5 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 5 (read/write). */ - -#define DMASp 0x00000020 /* DMA control reg. Space [byte] */ - -#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */ -#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */ -#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */ -#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */ -#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */ -#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */ -#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */ -#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */ - -#define DDAR_RW 0x00000001 /* device data Read/Write */ -#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */ - /* (memory -> device) */ -#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */ - /* (device -> memory) */ -#define DDAR_E 0x00000002 /* big/little Endian device */ -#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */ -#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */ -#define DDAR_BS 0x00000004 /* device Burst Size */ -#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */ -#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */ -#define DDAR_DW 0x00000008 /* device Data Width */ -#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */ -#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */ -#define DDAR_DS Fld (4, 4) /* Device Select */ -#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \ - (0x0 << FShft (DDAR_DS)) -#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \ - (0x1 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \ - (0x2 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \ - (0x3 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \ - (0x4 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \ - (0x5 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \ - (0x6 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \ - (0x7 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \ - (0x8 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \ - (0x9 << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \ - /* (audio) */ \ - (0xA << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \ - /* (audio) */ \ - (0xB << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \ - /* (telecom) */ \ - (0xC << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \ - /* (telecom) */ \ - (0xD << FShft (DDAR_DS)) -#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \ - (0xE << FShft (DDAR_DS)) -#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \ - (0xF << FShft (DDAR_DS)) -#define DDAR_DA Fld (24, 8) /* Device Address */ -#define DDAR_DevAdd(Add) /* Device Address */ \ - (((Add) & 0xF0000000) | \ - (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2))) -#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \ - /* (telecom) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \ - /* (telecom) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) - -#define DCSR_RUN 0x00000001 /* DMA running */ -#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ -#define DCSR_ERROR 0x00000004 /* DMA ERROR */ -#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ -#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */ -#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */ -#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */ -#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */ -#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */ -#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */ - -#define DBT_TC Fld (13, 0) /* Transfer Count */ -#define DBTA_TCA DBT_TC /* Transfer Count buffer A */ -#define DBTB_TCB DBT_TC /* Transfer Count buffer B */ +#define DMA_SIZE (6 * 0x20) +#define DMA_PHYS 0xb0000000 /* @@ -1903,16 +1688,6 @@ #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ /* (Alternative) */ -#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */ -#define LCSR __REG(0xB0100004) /* LCD Status Reg. */ -#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */ -#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */ -#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */ -#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */ -#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */ -#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */ -#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */ - #define LCCR0_LEN 0x00000001 /* LCD ENable */ #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ #define LCCR0_Color (LCCR0_CMS*0) /* Color display */ diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 52acda7061b7..f33679d2d3ee 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/collie.h * - * This file contains the hardware specific definitions for Assabet + * This file contains the hardware specific definitions for Collie * Only include this file from SA1100-specific files. * * ChangeLog: @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H +extern void locomolcd_power(int on); #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) #define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0) diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h deleted file mode 100644 index dda1b351310d..000000000000 --- a/arch/arm/mach-sa1100/include/mach/dma.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/dma.h - * - * Generic SA1100 DMA support - * - * Copyright (C) 2000 Nicolas Pitre - * - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "hardware.h" - - -/* - * The SA1100 has six internal DMA channels. - */ -#define SA1100_DMA_CHANNELS 6 - -/* - * Maximum physical DMA buffer size - */ -#define MAX_DMA_SIZE 0x1fff -#define CUT_DMA_SIZE 0x1000 - -/* - * All possible SA1100 devices a DMA channel can be attached to. - */ -typedef enum { - DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */ - DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */ - DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */ - DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */ - DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */ - DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */ - DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */ - DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */ - DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */ - DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */ - DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */ - DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */ - DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */ - DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */ - DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */ - DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */ - DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */ - DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ -} dma_device_t; - -typedef struct { - volatile u_long DDAR; - volatile u_long SetDCSR; - volatile u_long ClrDCSR; - volatile u_long RdDCSR; - volatile dma_addr_t DBSA; - volatile u_long DBTA; - volatile dma_addr_t DBSB; - volatile u_long DBTB; -} dma_regs_t; - -typedef void (*dma_callback_t)(void *data); - -/* - * DMA function prototypes - */ - -extern int sa1100_request_dma( dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **regs ); -extern void sa1100_free_dma( dma_regs_t *regs ); -extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size ); -extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs); -extern void sa1100_reset_dma(dma_regs_t *regs); - -/** - * sa1100_stop_dma - stop DMA in progress - * @regs: identifier for the channel to use - * - * This stops DMA without clearing buffer pointers. Unlike - * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma() - * or sa1100_get_dma_pos(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_resume_dma - resume DMA on a stopped channel - * @regs: identifier for the channel to use - * - * This resumes DMA on a channel previously stopped with - * sa1100_stop_dma(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_clear_dma - clear DMA pointers - * @regs: identifier for the channel to use - * - * This clear any DMA state so the DMA engine is ready to restart - * with new buffers through sa1100_start_dma(). Any buffers in flight - * are discarded. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h deleted file mode 100644 index dfc27ff08344..000000000000 --- a/arch/arm/mach-sa1100/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * __io() is required to be an equivalent mapping to __mem_pci() for - * SOC_COMMON to work. - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index d18f21abef80..3790298b7142 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -71,22 +71,19 @@ /* * Figure out the MAX IRQ number. * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4 - * Otherwise, we have the standard IRQs only. + * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically + * allocate their IRQs above NR_IRQS. + * + * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has + * to be included in the NR_IRQS calculation. */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_BOARD_END + 55) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_BOARD_START + 4) +#ifdef CONFIG_SHARP_LOCOMO +#define NR_IRQS_LOCOMO 4 #else -#define NR_IRQS (IRQ_BOARD_START) +#define NR_IRQS_LOCOMO 0 #endif -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) -#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) -#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) +#ifndef NR_IRQS +#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) +#endif +#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index ed1a331508a7..4b2860ae3828 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -16,7 +16,7 @@ struct mcp_plat_data { u32 mccr0; u32 mccr1; unsigned int sclk_rate; - int gpio_base; + void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h index ffe2bc45eed0..5516a52a329d 100644 --- a/arch/arm/mach-sa1100/include/mach/neponset.h +++ b/arch/arm/mach-sa1100/include/mach/neponset.h @@ -15,54 +15,6 @@ /* * Neponset definitions: */ - -#define NEPONSET_CPLD_BASE (0x10000000) -#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000) -#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE) - -#define _IRR 0x10000024 /* Interrupt Reason Register */ -#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */ -#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */ -#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */ -#define _NCR_0 0x100000a0 /* Control Register (RW) */ -#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */ -#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */ -#define _SWPK 0x10000020 /* Switch pack (RO) */ -#define _WHOAMI 0x10000000 /* System ID Register (RO) */ - -#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */ - -#define IRR (*((volatile u_char *) Nep_p2v(_IRR))) -#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL))) -#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0))) -#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1))) -#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0))) -#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT))) -#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN))) -#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK))) -#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI))) - -#define LEDS (*((volatile Word *) Nep_p2v(_LEDS))) - -#define IRR_ETHERNET (1<<0) -#define IRR_USAR (1<<1) -#define IRR_SA1111 (1<<2) - -#define AUD_SEL_1341 (1<<0) -#define AUD_MUTE_1341 (1<<1) - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) - #define NCR_GP01_OFF (1<<0) #define NCR_TP_PWR_EN (1<<1) #define NCR_MS_PWR_EN (1<<2) @@ -71,4 +23,8 @@ #define NCR_A0VPP (1<<5) #define NCR_A1VPP (1<<6) +void neponset_ncr_frob(unsigned int, unsigned int); +#define neponset_ncr_set(v) neponset_ncr_frob(0, v) +#define neponset_ncr_clear(v) neponset_ncr_frob(v, 0) + #endif diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h index 019f857a7938..fff39e02b496 100644 --- a/arch/arm/mach-sa1100/include/mach/shannon.h +++ b/arch/arm/mach-sa1100/include/mach/shannon.h @@ -21,7 +21,7 @@ #define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */ #define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */ #define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */ -#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */ +#define SHANNON_GPIO_DISP_EN 22 /* out */ /* XXX GPIO 23 unaccounted for */ #define SHANNON_GPIO_EJECT_0 24 /* in */ #define SHANNON_GPIO_EJECT_1 25 /* in */ diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index dfbf824a69fa..516ccc25d7fd 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -17,6 +17,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach/irq.h> #include "generic.h" @@ -221,11 +222,8 @@ static struct irq_chip sa1100_normal_chip = { .irq_set_wake = sa1100_set_wake, }; -static struct resource irq_resource = { - .name = "irqs", - .start = 0x90050000, - .end = 0x9005ffff, -}; +static struct resource irq_resource = + DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); static struct sa1100irq_state { unsigned int saved; diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index ee121d6f0480..ca7a7e834720 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -23,9 +23,7 @@ #include <linux/mtd/partitions.h> #include <video/s1d13xxxfb.h> -#include <mach/hardware.h> #include <asm/hardware/sa1111.h> -#include <asm/irq.h> #include <asm/page.h> #include <asm/mach-types.h> #include <asm/setup.h> @@ -34,6 +32,9 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #include "generic.h" /* @@ -46,7 +47,7 @@ /* memory space (line 52 of HP's doc) */ #define SA1111REGSTART 0x40000000 -#define SA1111REGLEN 0x00001fff +#define SA1111REGLEN 0x00002000 #define EPSONREGSTART 0x48000000 #define EPSONREGLEN 0x00100000 #define EPSONFBSTART 0x48200000 @@ -174,16 +175,8 @@ static struct s1d13xxxfb_pdata s1d13xxxfb_data = { }; static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = EPSONFBSTART, - .end = EPSONFBSTART + EPSONFBLEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = EPSONREGSTART, - .end = EPSONREGSTART + EPSONREGLEN, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN), + [1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN), }; static struct platform_device s1d13xxxfb_device = { @@ -197,20 +190,12 @@ static struct platform_device s1d13xxxfb_device = { }; static struct resource sa1111_resources[] = { - [0] = { - .start = SA1111REGSTART, - .end = SA1111REGSTART + SA1111REGLEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIO1, - .end = IRQ_GPIO1, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN), + [1] = DEFINE_RES_IRQ(IRQ_GPIO1), }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, }; static u64 sa1111_dmamask = 0xffffffffUL; @@ -284,11 +269,6 @@ static struct map_desc jornada720_io_desc[] __initdata = { .pfn = __phys_to_pfn(EPSONFBSTART), .length = EPSONFBLEN, .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(SA1111REGSTART), - .length = SA1111REGLEN, - .type = MT_DEVICE } }; @@ -352,11 +332,8 @@ static struct flash_platform_data jornada720_flash_data = { .nr_parts = ARRAY_SIZE(jornada720_partitions), }; -static struct resource jornada720_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource jornada720_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init jornada720_mach_init(void) { @@ -367,6 +344,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ .atag_offset = 0x100, .map_io = jornada720_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = jornada720_mach_init, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index af4e2761f3db..eb6534e0b0d0 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -6,6 +6,8 @@ #include <linux/kernel.h> #include <linux/tty.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -15,6 +17,7 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" @@ -26,8 +29,86 @@ static struct mcp_plat_data lart_mcp_data = { .sclk_rate = 11981000, }; +#ifdef LART_GREY_LCD +static struct sa1100fb_mach_info lart_grey_info = { + .pixclock = 150000, .bpp = 4, + .xres = 320, .yres = 240, + + .hsync_len = 1, .vsync_len = 1, + .left_margin = 4, .upper_margin = 0, + .right_margin = 2, .lower_margin = 0, + + .cmap_greyscale = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), +}; +#endif +#ifdef LART_COLOR_LCD +static struct sa1100fb_mach_info lart_color_info = { + .pixclock = 150000, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 2, .vsync_len = 3, + .left_margin = 69, .upper_margin = 14, + .right_margin = 8, .lower_margin = 4, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), +}; +#endif +#ifdef LART_VIDEO_OUT +static struct sa1100fb_mach_info lart_video_info = { + .pixclock = 39721, .bpp = 16, + .xres = 640, .yres = 480, + + .hsync_len = 95, .vsync_len = 2, + .left_margin = 40, .upper_margin = 32, + .right_margin = 24, .lower_margin = 11, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), +}; +#endif + +#ifdef LART_KIT01_LCD +static struct sa1100fb_mach_info lart_kit01_info = { + .pixclock = 63291, .bpp = 16, + .xres = 640, .yres = 480, + + .hsync_len = 64, .vsync_len = 3, + .left_margin = 122, .upper_margin = 45, + .right_margin = 10, .lower_margin = 10, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg +}; +#endif + static void __init lart_init(void) { + struct sa1100fb_mach_info *inf = NULL; + +#ifdef LART_GREY_LCD + inf = &lart_grey_info; +#endif +#ifdef LART_COLOR_LCD + inf = &lart_color_info; +#endif +#ifdef LART_VIDEO_OUT + inf = &lart_video_info; +#endif +#ifdef LART_KIT01_LCD + inf = &lart_kit01_info; +#endif + + if (inf) + sa11x0_register_lcd(inf); + + sa11x0_ppc_configure_mcp(); sa11x0_register_mcp(&lart_mcp_data); } @@ -63,6 +144,7 @@ static void __init lart_map_io(void) MACHINE_START(LART, "LART") .atag_offset = 0x100, .map_io = lart_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .init_machine = lart_init, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c index 64e9b4b11b54..3699176bca94 100644 --- a/arch/arm/mach-sa1100/leds-assabet.c +++ b/arch/arm/mach-sa1100/leds-assabet.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/assabet.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c index cf1e38458b81..f99fac3eedb6 100644 --- a/arch/arm/mach-sa1100/leds-badge4.c +++ b/arch/arm/mach-sa1100/leds-badge4.c @@ -14,7 +14,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c index 259b48e0be89..040540fb7d8a 100644 --- a/arch/arm/mach-sa1100/leds-cerf.c +++ b/arch/arm/mach-sa1100/leds-cerf.c @@ -7,7 +7,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 2bce137462e4..6a2352436e62 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c index 0505a1fdcdb2..a51830c60e53 100644 --- a/arch/arm/mach-sa1100/leds-lart.c +++ b/arch/arm/mach-sa1100/leds-lart.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 85f6ee672225..8f6446b9f025 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <mach/nanoengine.h> +#include <mach/irqs.h> #include "generic.h" @@ -58,15 +59,8 @@ static struct flash_platform_data nanoengine_flash_data = { }; static struct resource nanoengine_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M), }; static struct map_desc nanoengine_io_desc[] __initdata = { @@ -114,6 +108,7 @@ static void __init nanoengine_init(void) MACHINE_START(NANOENGINE, "BSE nanoEngine") .atag_offset = 0x100, .map_io = nanoengine_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = nanoengine_init, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index b4fa53a1427e..6c58f01b358a 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -1,89 +1,104 @@ /* * linux/arch/arm/mach-sa1100/neponset.c - * */ -#include <linux/kernel.h> +#include <linux/err.h> #include <linux/init.h> -#include <linux/tty.h> #include <linux/ioport.h> -#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/serial_core.h> +#include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> -#include <mach/assabet.h> -#include <mach/neponset.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> -/* - * Install handler for Neponset IRQ. Note that we have to loop here - * since the ETHERNET and USAR IRQs are level based, and we need to - * ensure that the IRQ signal is deasserted before returning. This - * is rather unfortunate. - */ -static void -neponset_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int irr; - - while (1) { - /* - * Acknowledge the parent IRQ. - */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - - /* - * Read the interrupt reason register. Let's have all - * active IRQ bits high. Note: there is a typo in the - * Neponset user's guide for the SA1111 IRR level. - */ - irr = IRR ^ (IRR_ETHERNET | IRR_USAR); - - if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) - break; - - /* - * Since there is no individual mask, we have to - * mask the parent IRQ. This is safe, since we'll - * recheck the register for any pending IRQs. - */ - if (irr & (IRR_ETHERNET | IRR_USAR)) { - desc->irq_data.chip->irq_mask(&desc->irq_data); - - /* - * Ack the interrupt now to prevent re-entering - * this neponset handler. Again, this is safe - * since we'll check the IRR register prior to - * leaving. - */ - desc->irq_data.chip->irq_ack(&desc->irq_data); +#include <mach/hardware.h> +#include <mach/assabet.h> +#include <mach/neponset.h> +#include <mach/irqs.h> + +#define NEP_IRQ_SMC91X 0 +#define NEP_IRQ_USAR 1 +#define NEP_IRQ_SA1111 2 +#define NEP_IRQ_NR 3 + +#define WHOAMI 0x00 +#define LEDS 0x10 +#define SWPK 0x20 +#define IRR 0x24 +#define KP_Y_IN 0x80 +#define KP_X_OUT 0x90 +#define NCR_0 0xa0 +#define MDM_CTL_0 0xb0 +#define MDM_CTL_1 0xb4 +#define AUD_CTL 0xc0 + +#define IRR_ETHERNET (1 << 0) +#define IRR_USAR (1 << 1) +#define IRR_SA1111 (1 << 2) + +#define MDM_CTL0_RTS1 (1 << 0) +#define MDM_CTL0_DTR1 (1 << 1) +#define MDM_CTL0_RTS2 (1 << 2) +#define MDM_CTL0_DTR2 (1 << 3) + +#define MDM_CTL1_CTS1 (1 << 0) +#define MDM_CTL1_DSR1 (1 << 1) +#define MDM_CTL1_DCD1 (1 << 2) +#define MDM_CTL1_CTS2 (1 << 3) +#define MDM_CTL1_DSR2 (1 << 4) +#define MDM_CTL1_DCD2 (1 << 5) + +#define AUD_SEL_1341 (1 << 0) +#define AUD_MUTE_1341 (1 << 1) - if (irr & IRR_ETHERNET) { - generic_handle_irq(IRQ_NEPONSET_SMC9196); - } +extern void sa1110_mb_disable(void); - if (irr & IRR_USAR) { - generic_handle_irq(IRQ_NEPONSET_USAR); - } +struct neponset_drvdata { + void __iomem *base; + struct platform_device *sa1111; + struct platform_device *smc91x; + unsigned irq_base; +#ifdef CONFIG_PM_SLEEP + u32 ncr0; + u32 mdm_ctl_0; +#endif +}; - desc->irq_data.chip->irq_unmask(&desc->irq_data); - } +static void __iomem *nep_base; - if (irr & IRR_SA1111) { - generic_handle_irq(IRQ_NEPONSET_SA1111); - } +void neponset_ncr_frob(unsigned int mask, unsigned int val) +{ + void __iomem *base = nep_base; + + if (base) { + unsigned long flags; + unsigned v; + + local_irq_save(flags); + v = readb_relaxed(base + NCR_0); + writeb_relaxed((v & ~mask) | val, base + NCR_0); + local_irq_restore(flags); + } else { + WARN(1, "nep_base unset\n"); } } static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) { - u_int mdm_ctl0 = MDM_CTL_0; + void __iomem *base = nep_base; + u_int mdm_ctl0; + if (!base) + return; + + mdm_ctl0 = readb_relaxed(base + MDM_CTL_0); if (port->mapbase == _Ser1UTCR0) { if (mctrl & TIOCM_RTS) mdm_ctl0 &= ~MDM_CTL0_RTS2; @@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) mdm_ctl0 |= MDM_CTL0_DTR1; } - MDM_CTL_0 = mdm_ctl0; + writeb_relaxed(mdm_ctl0, base + MDM_CTL_0); } static u_int neponset_get_mctrl(struct uart_port *port) { + void __iomem *base = nep_base; u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - u_int mdm_ctl1 = MDM_CTL_1; + u_int mdm_ctl1; + + if (!base) + return ret; + mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); if (port->mapbase == _Ser1UTCR0) { if (mdm_ctl1 & MDM_CTL1_DCD2) ret &= ~TIOCM_CD; @@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = { .get_mctrl = neponset_get_mctrl, }; -static int __devinit neponset_probe(struct platform_device *dev) +/* + * Install handler for Neponset IRQ. Note that we have to loop here + * since the ETHERNET and USAR IRQs are level based, and we need to + * ensure that the IRQ signal is deasserted before returning. This + * is rather unfortunate. + */ +static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc) { - sa1100_register_uart_fns(&neponset_port_fns); + struct neponset_drvdata *d = irq_desc_get_handler_data(desc); + unsigned int irr; - /* - * Install handler for GPIO25. - */ - irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); - irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler); + while (1) { + /* + * Acknowledge the parent IRQ. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); - /* - * We would set IRQ_GPIO25 to be a wake-up IRQ, but - * unfortunately something on the Neponset activates - * this IRQ on sleep (ethernet?) - */ -#if 0 - enable_irq_wake(IRQ_GPIO25); -#endif + /* + * Read the interrupt reason register. Let's have all + * active IRQ bits high. Note: there is a typo in the + * Neponset user's guide for the SA1111 IRR level. + */ + irr = readb_relaxed(d->base + IRR); + irr ^= IRR_ETHERNET | IRR_USAR; - /* - * Setup other Neponset IRQs. SA1111 will be done by the - * generic SA1111 code. - */ - irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); - irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); + if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) + break; - /* - * Disable GPIO 0/1 drivers so the buttons work on the module. - */ - NCR_0 = NCR_GP01_OFF; + /* + * Since there is no individual mask, we have to + * mask the parent IRQ. This is safe, since we'll + * recheck the register for any pending IRQs. + */ + if (irr & (IRR_ETHERNET | IRR_USAR)) { + desc->irq_data.chip->irq_mask(&desc->irq_data); - return 0; -} + /* + * Ack the interrupt now to prevent re-entering + * this neponset handler. Again, this is safe + * since we'll check the IRR register prior to + * leaving. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); -#ifdef CONFIG_PM + if (irr & IRR_ETHERNET) + generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X); -/* - * LDM power management. - */ -static unsigned int neponset_saved_state; + if (irr & IRR_USAR) + generic_handle_irq(d->irq_base + NEP_IRQ_USAR); -static int neponset_suspend(struct platform_device *dev, pm_message_t state) -{ - /* - * Save state. - */ - neponset_saved_state = NCR_0; + desc->irq_data.chip->irq_unmask(&desc->irq_data); + } - return 0; + if (irr & IRR_SA1111) + generic_handle_irq(d->irq_base + NEP_IRQ_SA1111); + } } -static int neponset_resume(struct platform_device *dev) +/* Yes, we really do not have any kind of masking or unmasking */ +static void nochip_noop(struct irq_data *irq) { - NCR_0 = neponset_saved_state; - - return 0; } -#else -#define neponset_suspend NULL -#define neponset_resume NULL -#endif - -static struct platform_driver neponset_device_driver = { - .probe = neponset_probe, - .suspend = neponset_suspend, - .resume = neponset_resume, - .driver = { - .name = "neponset", - }, -}; - -static struct resource neponset_resources[] = { - [0] = { - .start = 0x10000000, - .end = 0x17ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device neponset_device = { - .name = "neponset", - .id = 0, - .num_resources = ARRAY_SIZE(neponset_resources), - .resource = neponset_resources, -}; - -static struct resource sa1111_resources[] = { - [0] = { - .start = 0x40000000, - .end = 0x40001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NEPONSET_SA1111, - .end = IRQ_NEPONSET_SA1111, - .flags = IORESOURCE_IRQ, - }, +static struct irq_chip nochip = { + .name = "neponset", + .irq_ack = nochip_noop, + .irq_mask = nochip_noop, + .irq_unmask = nochip_noop, }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, }; -static u64 sa1111_dmamask = 0xffffffffUL; +static int __devinit neponset_probe(struct platform_device *dev) +{ + struct neponset_drvdata *d; + struct resource *nep_res, *sa1111_res, *smc91x_res; + struct resource sa1111_resources[] = { + DEFINE_RES_MEM(0x40000000, SZ_8K), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info sa1111_devinfo = { + .parent = &dev->dev, + .name = "sa1111", + .id = 0, + .res = sa1111_resources, + .num_res = ARRAY_SIZE(sa1111_resources), + .data = &sa1111_info, + .size_data = sizeof(sa1111_info), + .dma_mask = 0xffffffffUL, + }; + struct resource smc91x_resources[] = { + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, + 0x02000000, "smc91x-regs"), + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, + 0x02000000, "smc91x-attrib"), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info smc91x_devinfo = { + .parent = &dev->dev, + .name = "smc91x", + .id = 0, + .res = smc91x_resources, + .num_res = ARRAY_SIZE(smc91x_resources), + }; + int ret, irq; + + if (nep_base) + return -EBUSY; + + irq = ret = platform_get_irq(dev, 0); + if (ret < 0) + goto err_alloc; + + nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0); + smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2); + if (!nep_res || !smc91x_res || !sa1111_res) { + ret = -ENXIO; + goto err_alloc; + } -static struct platform_device sa1111_device = { - .name = "sa1111", - .id = 0, - .dev = { - .dma_mask = &sa1111_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sa1111_info, - }, - .num_resources = ARRAY_SIZE(sa1111_resources), - .resource = sa1111_resources, -}; + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SA1100_CS3_PHYS, - .end = SA1100_CS3_PHYS + 0x01ffffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NEPONSET_SMC9196, - .end = IRQ_NEPONSET_SMC9196, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "smc91x-attrib", - .start = SA1100_CS3_PHYS + 0x02000000, - .end = SA1100_CS3_PHYS + 0x03ffffff, - .flags = IORESOURCE_MEM, - }, -}; + d->base = ioremap(nep_res->start, SZ_4K); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; + if (readb_relaxed(d->base + WHOAMI) != 0x11) { + dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n", + readb_relaxed(d->base + WHOAMI)); + ret = -ENODEV; + goto err_id; + } -static struct platform_device *devices[] __initdata = { - &neponset_device, - &sa1111_device, - &smc91x_device, -}; + ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1); + if (ret <= 0) { + dev_err(&dev->dev, "unable to allocate %u irqs: %d\n", + NEP_IRQ_NR, ret); + if (ret == 0) + ret = -ENOMEM; + goto err_irq_alloc; + } -extern void sa1110_mb_disable(void); + d->irq_base = ret; -static int __init neponset_init(void) -{ - platform_driver_register(&neponset_device_driver); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE); + irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); - /* - * The Neponset is only present on the Assabet machine type. - */ - if (!machine_is_assabet()) - return -ENODEV; + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(irq, d); + irq_set_chained_handler(irq, neponset_irq_handler); /* - * Ensure that the memory bus request/grant signals are setup, - * and the grant is held in its inactive state, whether or not - * we actually have a Neponset attached. + * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately + * something on the Neponset activates this IRQ on sleep (eth?) */ +#if 0 + enable_irq_wake(irq); +#endif + + dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", + d->irq_base, d->irq_base + NEP_IRQ_NR - 1); + nep_base = d->base; + + sa1100_register_uart_fns(&neponset_port_fns); + + /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); - if (!machine_has_neponset()) { - printk(KERN_DEBUG "Neponset expansion board not present\n"); - return -ENODEV; - } + /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ + writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); - if (WHOAMI != 0x11) { - printk(KERN_WARNING "Neponset board detected, but " - "wrong ID: %02x\n", WHOAMI); - return -ENODEV; - } + sa1111_resources[0].parent = sa1111_res; + sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; + sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; + d->sa1111 = platform_device_register_full(&sa1111_devinfo); + + smc91x_resources[0].parent = smc91x_res; + smc91x_resources[1].parent = smc91x_res; + smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X; + smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X; + d->smc91x = platform_device_register_full(&smc91x_devinfo); + + platform_set_drvdata(dev, d); - return platform_add_devices(devices, ARRAY_SIZE(devices)); + return 0; + + err_irq_alloc: + err_id: + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; } -subsys_initcall(neponset_init); +static int __devexit neponset_remove(struct platform_device *dev) +{ + struct neponset_drvdata *d = platform_get_drvdata(dev); + int irq = platform_get_irq(dev, 0); + + if (!IS_ERR(d->sa1111)) + platform_device_unregister(d->sa1111); + if (!IS_ERR(d->smc91x)) + platform_device_unregister(d->smc91x); + irq_set_chained_handler(irq, NULL); + irq_free_descs(d->irq_base, NEP_IRQ_NR); + nep_base = NULL; + iounmap(d->base); + kfree(d); -static struct map_desc neponset_io_desc[] __initdata = { - { /* System Registers */ - .virtual = 0xf3000000, - .pfn = __phys_to_pfn(0x10000000), - .length = SZ_1M, - .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x40000000), - .length = SZ_1M, - .type = MT_DEVICE - } + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int neponset_suspend(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + + d->ncr0 = readb_relaxed(d->base + NCR_0); + d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0); + + return 0; +} + +static int neponset_resume(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + + writeb_relaxed(d->ncr0, d->base + NCR_0); + writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0); + + return 0; +} + +static const struct dev_pm_ops neponset_pm_ops = { + .suspend_noirq = neponset_suspend, + .resume_noirq = neponset_resume, + .freeze_noirq = neponset_suspend, + .restore_noirq = neponset_resume, +}; +#define PM_OPS &neponset_pm_ops +#else +#define PM_OPS NULL +#endif + +static struct platform_driver neponset_device_driver = { + .probe = neponset_probe, + .remove = __devexit_p(neponset_remove), + .driver = { + .name = "neponset", + .owner = THIS_MODULE, + .pm = PM_OPS, + }, }; -void __init neponset_map_io(void) +static int __init neponset_init(void) { - iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc)); + return platform_driver_register(&neponset_device_driver); } + +subsys_initcall(neponset_init); diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index b466bca9c651..b49108b890a8 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -135,12 +135,8 @@ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys &sys->resources); } -static struct resource pci_io_ports = { - .name = "PCI IO", - .start = 0x400, - .end = 0x7FF, - .flags = IORESOURCE_IO, -}; +static struct resource pci_io_ports = + DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO"); static struct resource pci_non_prefetchable_memory = { .name = "PCI non-prefetchable", diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 9307df053533..1602575a0d5c 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -37,17 +37,9 @@ #define IRQ_GPIO_ETH0_IRQ IRQ_GPIO21 static struct resource smc91x_resources[] = { - [0] = { - .start = PLEB_ETH0_P, - .end = PLEB_ETH0_P | 0x03ffffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000), #if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */ - [1] = { - .start = IRQ_GPIO_ETH0_IRQ, - .end = IRQ_GPIO_ETH0_IRQ, - .flags = IORESOURCE_IRQ, - }, + [1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ), #endif }; @@ -70,16 +62,8 @@ static struct platform_device *devices[] __initdata = { * the two SA1100 lowest chip select outputs. */ static struct resource pleb_flash_resources[] = { - [0] = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M), + [1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M), }; @@ -147,6 +131,7 @@ static void __init pleb_map_io(void) MACHINE_START(PLEB, "PLEB") .map_io = pleb_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index bf85b8b259d5..2fa499ec6afe 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <asm/memory.h> #include <asm/suspend.h> -#include <asm/system.h> #include <asm/mach/time.h> extern int sa1100_finish_suspend(unsigned long); diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 318b2b766a0b..ca8bf59b9047 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -9,6 +9,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> @@ -19,6 +21,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/shannon.h> +#include <mach/irqs.h> #include "generic.h" @@ -46,19 +49,32 @@ static struct flash_platform_data shannon_flash_data = { .nr_parts = ARRAY_SIZE(shannon_partitions), }; -static struct resource shannon_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_4M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource shannon_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M); static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, }; +static struct sa1100fb_mach_info shannon_lcd_info = { + .pixclock = 152500, .bpp = 8, + .xres = 640, .yres = 480, + + .hsync_len = 4, .vsync_len = 3, + .left_margin = 2, .upper_margin = 0, + .right_margin = 1, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, + .lccr3 = LCCR3_ACBsDiv(512), +}; + static void __init shannon_init(void) { + sa11x0_ppc_configure_mcp(); + sa11x0_register_lcd(&shannon_lcd_info); sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_register_mcp(&shannon_mcp_data); } @@ -84,6 +100,7 @@ static void __init shannon_map_io(void) MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") .atag_offset = 0x100, .map_io = shannon_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index e17c04d6e324..3efae03cb3d7 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -7,15 +7,15 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/proc_fs.h> -#include <linux/string.h> +#include <linux/string.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -26,6 +26,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/simpad.h> +#include <mach/irqs.h> #include <linux/serial_core.h> #include <linux/ioport.h> @@ -176,21 +177,18 @@ static struct flash_platform_data simpad_flash_data = { static struct resource simpad_flash_resources [] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_16M -1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_16M -1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M), +}; + +static struct ucb1x00_plat_data simpad_ucb1x00_data = { + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, + .codec_pdata = &simpad_ucb1x00_data, }; @@ -376,6 +374,7 @@ static int __init simpad_init(void) pm_power_off = simpad_power_off; + sa11x0_ppc_configure_mcp(); sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); sa11x0_register_mcp(&simpad_mcp_data); @@ -394,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ .atag_offset = 0x100, .map_io = simpad_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index e8223315b442..30cc6721665b 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -26,27 +26,36 @@ * * Causes sa11x0 to enter sleep state * + * Must be aligned to a cacheline. */ - + .balign 32 ENTRY(sa1100_finish_suspend) @ disable clock switching mcr p15, 0, r1, c15, c2, 2 - @ Adjust memory timing before lowering CPU clock - @ Clock speed adjustment without changing memory timing makes - @ CPU hang in some cases - ldr r0, =MDREFR - ldr r1, [r0] - orr r1, r1, #MDREFR_K1DB2 - str r1, [r0] + ldr r6, =MDREFR + ldr r4, [r6] + orr r4, r4, #MDREFR_K1DB2 + ldr r5, =PPCR + + @ Pre-load __udelay into the I-cache + mov r0, #1 + bl __udelay + mov r0, r0 + + @ The following must all exist in a single cache line to + @ avoid accessing memory until this sequence is complete, + @ otherwise we occasionally hang. + + @ Adjust memory timing before lowering CPU clock + str r4, [r6] @ delay 90us and set CPU PLL to lowest speed @ fixes resume problem on high speed SA1110 mov r0, #90 bl __udelay - ldr r0, =PPCR mov r1, #0 - str r1, [r0] + str r1, [r5] mov r0, #90 bl __udelay @@ -85,12 +94,10 @@ ENTRY(sa1100_finish_suspend) bic r5, r5, #FMsk(MSC_RT) bic r5, r5, #FMsk(MSC_RT)<<16 - ldr r6, =MDREFR - ldr r7, [r6] -bic r7, r7, #0x0000FF00 -bic r7, r7, #0x000000F0 -orr r8, r7, #MDREFR_SLFRSH + bic r7, r7, #0x0000FF00 + bic r7, r7, #0x000000F0 + orr r8, r7, #MDREFR_SLFRSH ldr r9, =MDCNFG ldr r10, [r9] diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index b20ff93b84a5..e22fca9ad5ec 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -19,8 +19,8 @@ #include <linux/init.h> #include <linux/io.h> -#include <asm/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/hardware/ssp.h> #define TIMEOUT 100000 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 69e33535dee6..6af26e8d55e6 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -18,6 +18,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> #include <mach/hardware.h> +#include <mach/irqs.h> static u32 notrace sa1100_read_sched_clock(void) { diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 6a2a7f2c2557..2704bcd869cd 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -15,6 +15,7 @@ #include <asm/mach-types.h> #include <asm/leds.h> #include <asm/param.h> +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h index 9ccbcecc430b..1a45fc01ff1d 100644 --- a/arch/arm/mach-shark/include/mach/io.h +++ b/arch/arm/mach-shark/include/mach/io.h @@ -15,6 +15,4 @@ #define __io(a) ((void __iomem *)(0xe0000000 + (a))) -#define __mem_pci(addr) (addr) - #endif diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c index ccd49189bbd0..25609076921f 100644 --- a/arch/arm/mach-shark/leds.c +++ b/arch/arm/mach-shark/leds.c @@ -23,7 +23,6 @@ #include <linux/io.h> #include <asm/leds.h> -#include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 060e5644c49c..34560cab45d9 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -100,6 +100,10 @@ config MACH_MARZEN comment "SH-Mobile System Configuration" +config CPU_HAS_INTEVT + bool + default y + menu "Memory configuration" config MEMORY_START diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index f50d7c8b1221..cb224a344af0 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -43,6 +43,7 @@ #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/sh73a0.h> #include <mach/common.h> #include <asm/mach-types.h> @@ -584,7 +585,7 @@ static void __init ag5evm_init(void) #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ - l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff); + l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff); #endif sh73a0_add_standard_devices(); platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 262f8def5577..b56dde2732bb 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1186,6 +1186,7 @@ static struct i2c_board_info i2c1_devices[] = { }, }; + #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A #define USCCR1 0xE6058144 diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 8b2124da245d..81fd95f7f52a 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -35,6 +35,7 @@ #include <asm/mach/time.h> #include <asm/hardware/cache-l2x0.h> #include <mach/r8a7740.h> +#include <mach/irqs.h> #include <video/sh_mobile_lcdc.h> /* @@ -370,7 +371,7 @@ static void __init bonito_init(void) #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); #endif r8a7740_add_standard_devices(); diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index b627e89037f5..39b6cf85ced6 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -33,6 +33,7 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/dma-mapping.h> +#include <mach/irqs.h> #include <mach/sh7367.h> #include <mach/common.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 46d757d2759d..0e5a39c670bc 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -34,6 +34,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/gpio.h> #include <linux/dma-mapping.h> +#include <mach/irqs.h> #include <mach/sh7377.h> #include <mach/common.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 61c067294660..200dcd42a3a0 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -39,6 +39,7 @@ #include <linux/mfd/tmio.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/sh73a0.h> #include <mach/common.h> #include <asm/mach-types.h> @@ -507,7 +508,7 @@ static void __init kota2_init(void) #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); #endif sh73a0_add_standard_devices(); platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices)); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index bd4253ba05b6..f49e28abe0ab 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -39,6 +39,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/mtd/sh_flctl.h> #include <linux/pm_clock.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> @@ -54,6 +55,7 @@ #include <sound/sh_fsi.h> #include <mach/common.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #include <asm/mach/arch.h> @@ -955,6 +957,50 @@ static struct platform_device fsi_ak4643_device = { }, }; +/* FLCTL */ +static struct mtd_partition nand_partition_info[] = { + { + .name = "system", + .offset = 0, + .size = 128 * 1024 * 1024, + }, + { + .name = "userdata", + .offset = MTDPART_OFS_APPEND, + .size = 256 * 1024 * 1024, + }, + { + .name = "cache", + .offset = MTDPART_OFS_APPEND, + .size = 128 * 1024 * 1024, + }, +}; + +static struct resource nand_flash_resources[] = { + [0] = { + .start = 0xe6a30000, + .end = 0xe6a3009b, + .flags = IORESOURCE_MEM, + } +}; + +static struct sh_flctl_platform_data nand_flash_data = { + .parts = nand_partition_info, + .nr_parts = ARRAY_SIZE(nand_partition_info), + .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET + | SHBUSSEL | SEL_16BIT | SNAND_E, + .use_holden = 1, +}; + +static struct platform_device nand_flash_device = { + .name = "sh_flctl", + .resource = nand_flash_resources, + .num_resources = ARRAY_SIZE(nand_flash_resources), + .dev = { + .platform_data = &nand_flash_data, + }, +}; + /* * The card detect pin of the top SD/MMC slot (CN7) is active low and is * connected to GPIO A22 of SH7372 (GPIO_PORT41). @@ -1258,6 +1304,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &fsi_device, &fsi_ak4643_device, &fsi_hdmi_device, + &nand_flash_device, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -1327,15 +1374,6 @@ static struct i2c_board_info i2c1_devices[] = { }, }; -static void __init mackerel_map_io(void) -{ - sh7372_map_io(); - /* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); -} - #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A #define GPIO_PORT167CR 0xE60520A7 @@ -1496,6 +1534,30 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_MMCCMD0, NULL); gpio_request(GPIO_FN_MMCCLK0, NULL); + /* FLCTL */ + gpio_request(GPIO_FN_D0_NAF0, NULL); + gpio_request(GPIO_FN_D1_NAF1, NULL); + gpio_request(GPIO_FN_D2_NAF2, NULL); + gpio_request(GPIO_FN_D3_NAF3, NULL); + gpio_request(GPIO_FN_D4_NAF4, NULL); + gpio_request(GPIO_FN_D5_NAF5, NULL); + gpio_request(GPIO_FN_D6_NAF6, NULL); + gpio_request(GPIO_FN_D7_NAF7, NULL); + gpio_request(GPIO_FN_D8_NAF8, NULL); + gpio_request(GPIO_FN_D9_NAF9, NULL); + gpio_request(GPIO_FN_D10_NAF10, NULL); + gpio_request(GPIO_FN_D11_NAF11, NULL); + gpio_request(GPIO_FN_D12_NAF12, NULL); + gpio_request(GPIO_FN_D13_NAF13, NULL); + gpio_request(GPIO_FN_D14_NAF14, NULL); + gpio_request(GPIO_FN_D15_NAF15, NULL); + gpio_request(GPIO_FN_FCE0, NULL); + gpio_request(GPIO_FN_WE0_FWE, NULL); + gpio_request(GPIO_FN_FRB, NULL); + gpio_request(GPIO_FN_A4_FOE, NULL); + gpio_request(GPIO_FN_A5_FCDE, NULL); + gpio_request(GPIO_FN_RD_FSC, NULL); + /* enable GPS module (GT-720F) */ gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); @@ -1540,6 +1602,7 @@ static void __init mackerel_init(void) sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device); sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device); + sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device); sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) @@ -1555,7 +1618,7 @@ static void __init mackerel_init(void) } MACHINE_START(MACKEREL, "mackerel") - .map_io = mackerel_map_io, + .map_io = sh7372_map_io, .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index cbd5e4cd06d2..ef0e13bf0b3a 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -31,6 +31,7 @@ #include <mach/hardware.h> #include <mach/r8a7779.h> #include <mach/common.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index de243e3c8392..94d1f88246d3 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -511,7 +511,7 @@ enum { MSTP001, MSTP000, MSTP223, MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP328, MSTP323, MSTP322, MSTP315, MSTP314, MSTP313, MSTP312, MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; @@ -553,6 +553,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ + [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL*/ [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */ @@ -653,6 +654,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */ + CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c index 1b2334277e85..7e6559105d40 100644 --- a/arch/arm/mach-shmobile/cpuidle.c +++ b/arch/arm/mach-shmobile/cpuidle.c @@ -13,7 +13,7 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> -#include <asm/system.h> +#include <asm/cpuidle.h> #include <asm/io.h> static void shmobile_enter_wfi(void) @@ -29,37 +29,19 @@ static int shmobile_cpuidle_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - ktime_t before, after; - - before = ktime_get(); - - local_irq_disable(); - local_fiq_disable(); - shmobile_cpuidle_modes[index](); - local_irq_enable(); - local_fiq_enable(); - - after = ktime_get(); - dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10; - return index; } static struct cpuidle_device shmobile_cpuidle_dev; static struct cpuidle_driver shmobile_cpuidle_driver = { - .name = "shmobile_cpuidle", - .owner = THIS_MODULE, - .states[0] = { - .name = "C1", - .desc = "WFI", - .exit_latency = 1, - .target_residency = 1 * 2, - .flags = CPUIDLE_FLAG_TIME_VALID, - }, - .safe_state_index = 0, /* C1 */ - .state_count = 1, + .name = "shmobile_cpuidle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .safe_state_index = 0, /* C1 */ + .state_count = 1, }; void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv); diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h deleted file mode 100644 index 7339fe46cb7c..000000000000 --- a/arch/arm/mach-shmobile/include/mach/io.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_MACH_IO_H -#define __ASM_MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index dcb714f4d75a..4e686cc201fc 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -1,15 +1,11 @@ #ifndef __ASM_MACH_IRQS_H #define __ASM_MACH_IRQS_H -#define NR_IRQS 1024 +#include <linux/sh_intc.h> /* GIC */ #define gic_spi(nr) ((nr) + 32) -/* INTCA */ -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) - /* INTCS */ #define INTCS_VECT_BASE 0x2200 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h index 3bbcb3fa0775..540eaff08f34 100644 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H +#include <asm/system_misc.h> + static inline void arch_reset(char mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c index 272c84c20c83..09c42afcb22d 100644 --- a/arch/arm/mach-shmobile/intc-r8a7740.c +++ b/arch/arm/mach-shmobile/intc-r8a7740.c @@ -25,6 +25,7 @@ #include <linux/io.h> #include <linux/sh_intc.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 5d92fcde2bc3..550b23df4fd4 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -42,8 +42,8 @@ static int r8a7779_set_wake(struct irq_data *data, unsigned int on) void __init r8a7779_init_irq(void) { - void __iomem *gic_dist_base = __io(0xf0001000); - void __iomem *gic_cpu_base = __io(0xf0000100); + void __iomem *gic_dist_base = IOMEM(0xf0001000); + void __iomem *gic_cpu_base = IOMEM(0xf0000100); /* use GIC to handle interrupts */ gic_init(0, 29, gic_dist_base, gic_cpu_base); diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c index cfde9bfc3669..5bf776495b75 100644 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ b/arch/arm/mach-shmobile/intc-sh7367.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/sh_intc.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 89afcaba99a1..6447e0af52d4 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/sh_intc.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c index 2af4e6e9bc5b..b84a460a3405 100644 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ b/arch/arm/mach-shmobile/intc-sh7377.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/sh_intc.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 9857595eaa79..ee447404c857 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/sh_intc.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <mach/sh73a0.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> @@ -420,8 +421,8 @@ static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id) void __init sh73a0_init_irq(void) { - void __iomem *gic_dist_base = __io(0xf0001000); - void __iomem *gic_cpu_base = __io(0xf0000100); + void __iomem *gic_dist_base = IOMEM(0xf0001000); + void __iomem *gic_cpu_base = IOMEM(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); int k, n; diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index c38ba7b43ef8..a18a4ae16d2b 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/console.h> -#include <asm/system.h> #include <asm/io.h> #include <mach/common.h> #include <mach/r8a7779.h> diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index fcf8b1761aef..a3bdb12acde9 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -21,7 +21,6 @@ #include <linux/irq.h> #include <linux/bitrev.h> #include <linux/console.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/tlbflush.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 74e52341dd1b..14edb5cffa7f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -26,6 +26,7 @@ #include <linux/sh_timer.h> #include <mach/r8a7740.h> #include <mach/common.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 6820d785493d..12c6f529ab89 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -29,6 +29,7 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/r8a7779.h> #include <mach/common.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index a51e1a1e6996..2e3074ab75b3 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -30,6 +30,7 @@ #include <linux/sh_timer.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 5375325d7ca7..2fe8f83ca124 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -31,7 +31,9 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/pm_domain.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #include <mach/common.h> #include <asm/mach/map.h> @@ -54,6 +56,12 @@ static struct map_desc sh7372_io_desc[] __initdata = { void __init sh7372_map_io(void) { iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); + + /* + * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't + * enough to allocate the frame buffer memory. + */ + init_consistent_dma_size(12 << 20); } /* SCIFA0 */ diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index 9f146095098b..d576a6abbade 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -32,6 +32,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <asm/mach/map.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index b6a0734a738e..5bebffc10455 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -31,6 +31,7 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/sh73a0.h> #include <mach/common.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 9bb7b8575a1f..b62e19d4c9af 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -30,7 +30,7 @@ #include <asm/smp_twd.h> #include <asm/hardware/gic.h> -#define AVECR 0xfe700040 +#define AVECR IOMEM(0xfe700040) static struct r8a7779_pm_ch r8a7779_ch_cpu1 = { .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ @@ -138,7 +138,7 @@ void __init r8a7779_smp_prepare_cpus(void) scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ - __raw_writel(__pa(shmobile_secondary_vector), __io(AVECR)); + __raw_writel(__pa(shmobile_secondary_vector), AVECR); /* enable cache coherency on CPU0 */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index c0a9093ba3a8..14ad8b052f1a 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -28,11 +28,11 @@ #include <asm/smp_twd.h> #include <asm/hardware/gic.h> -#define WUPCR 0xe6151010 -#define SRESCR 0xe6151018 -#define PSTR 0xe6151040 -#define SBAR 0xe6180020 -#define APARMBAREA 0xe6f10020 +#define WUPCR IOMEM(0xe6151010) +#define SRESCR IOMEM(0xe6151018) +#define PSTR IOMEM(0xe6151040) +#define SBAR IOMEM(0xe6180020) +#define APARMBAREA IOMEM(0xe6f10020) static void __iomem *scu_base_addr(void) { @@ -78,10 +78,10 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) - __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ + if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3) + __raw_writel(1 << cpu, WUPCR); /* wake up */ else - __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ + __raw_writel(1 << cpu, SRESCR); /* reset */ return 0; } @@ -93,8 +93,8 @@ void __init sh73a0_smp_prepare_cpus(void) scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ - __raw_writel(0, __io(APARMBAREA)); /* 4k */ - __raw_writel(__pa(shmobile_secondary_vector), __io(SBAR)); + __raw_writel(0, APARMBAREA); /* 4k */ + __raw_writel(__pa(shmobile_secondary_vector), SBAR); /* enable cache coherency on CPU0 */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index c1febe13f709..4d1b86a49923 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -12,8 +12,8 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> -#include <asm/system.h> #include <asm/io.h> +#include <asm/system_misc.h> static int shmobile_suspend_default_enter(suspend_state_t suspend_state) { diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index f67860cd649f..6c4841f55223 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -12,6 +12,7 @@ */ #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <asm/mach-types.h> #include <plat/clock.h> diff --git a/arch/arm/mach-spear3xx/include/mach/io.h b/arch/arm/mach-spear3xx/include/mach/io.h deleted file mode 100644 index 30cff8a1f6b5..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/io.h - * - * IO definitions for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#include <plat/io.h> - -#endif /* __MACH_IO_H */ diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig index ff4ae5ba00f1..fbe298bd1d92 100644 --- a/arch/arm/mach-spear6xx/Kconfig +++ b/arch/arm/mach-spear6xx/Kconfig @@ -5,11 +5,12 @@ if ARCH_SPEAR6XX menu "SPEAr6xx Implementations" -config BOARD_SPEAR600_EVB - bool "SPEAr600 Evaluation Board" +config BOARD_SPEAR600_DT + bool "SPEAr600 generic board configured via device-tree" select MACH_SPEAR600 + select USE_OF help - Supports ST SPEAr600 Evaluation Board + Supports ST SPEAr600 boards configured via the device-tree endmenu diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile index cc1a4d82d459..76e5750552fc 100644 --- a/arch/arm/mach-spear6xx/Makefile +++ b/arch/arm/mach-spear6xx/Makefile @@ -4,9 +4,3 @@ # common files obj-y += clock.o spear6xx.o - -# spear600 specific files -obj-$(CONFIG_MACH_SPEAR600) += spear600.o - -# spear600 boards files -obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index ac70e0d88fef..a86499a8a15f 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -12,6 +12,7 @@ */ #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <plat/clock.h> #include <mach/misc_regs.h> @@ -641,8 +642,8 @@ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "uart0", .clk = &uart0_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "d0000000.serial", .clk = &uart0_clk}, + { .dev_id = "d0080000.serial", .clk = &uart1_clk}, { .dev_id = "firda", .clk = &firda_clk}, { .dev_id = "clcd", .clk = &clcd_clk}, { .dev_id = "gpt0", .clk = &gpt0_clk}, @@ -655,20 +656,20 @@ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, /* clock derived from ahb clk */ { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, + { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, { .dev_id = "dma", .clk = &dma_clk}, { .dev_id = "jpeg", .clk = &jpeg_clk}, { .dev_id = "gmac", .clk = &gmac_clk}, { .dev_id = "smi", .clk = &smi_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, + { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, /* clock derived from apb clk */ { .dev_id = "adc", .clk = &adc_clk}, { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "gpio0", .clk = &gpio0_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "gpio2", .clk = &gpio2_clk}, + { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, + { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, + { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, }; void __init spear6xx_clk_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/io.h b/arch/arm/mach-spear6xx/include/mach/io.h deleted file mode 100644 index fb7c106cea94..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/io.h - * - * IO definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#include <plat/io.h> - -#endif /* __MACH_IO_H */ - diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c deleted file mode 100644 index d0e6eeae9b04..000000000000 --- a/arch/arm/mach-spear6xx/spear600.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-spear6xx/spear600.c - * - * SPEAr600 machine source file - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/ptrace.h> -#include <asm/irq.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* Add spear600 specific devices here */ - -void __init spear600_init(void) -{ - /* call spear6xx family common init function */ - spear6xx_init(); -} diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c deleted file mode 100644 index c6e4254741cc..000000000000 --- a/arch/arm/mach-spear6xx/spear600_evb.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear6xx/spear600_evb.c - * - * SPEAr600 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -static struct amba_device *amba_devs[] __initdata = { - &gpio_device[0], - &gpio_device[1], - &gpio_device[2], - &uart_device[0], - &uart_device[1], -}; - -static struct platform_device *plat_devs[] __initdata = { -}; - -static void __init spear600_evb_init(void) -{ - unsigned int i; - - /* call spear600 machine init function */ - spear600_init(); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") - .atag_offset = 0x100, - .map_io = spear6xx_map_io, - .init_irq = spear6xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear6xx_timer, - .init_machine = spear600_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index b997b1b10ba0..2ed8b14c82c8 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -6,111 +6,21 @@ * Copyright (C) 2009 ST Microelectronics * Rajeev Kumar<rajeev-dlh.kumar@st.com> * + * Copyright 2012 Stefan Roese <sr@denx.de> + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> -#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <asm/hardware/vic.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <mach/generic.h> #include <mach/hardware.h> -#include <mach/irqs.h> - -/* Add spear6xx machines common devices here */ -/* uart device registration */ -struct amba_device uart_device[] = { - { - .dev = { - .init_name = "uart0", - }, - .res = { - .start = SPEAR6XX_ICM1_UART0_BASE, - .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_UART_0}, - }, { - .dev = { - .init_name = "uart1", - }, - .res = { - .start = SPEAR6XX_ICM1_UART1_BASE, - .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_UART_1}, - } -}; - -/* gpio device registration */ -static struct pl061_platform_data gpio_plat_data[] = { - { - .gpio_base = 0, - .irq_base = SPEAR_GPIO0_INT_BASE, - }, { - .gpio_base = 8, - .irq_base = SPEAR_GPIO1_INT_BASE, - }, { - .gpio_base = 16, - .irq_base = SPEAR_GPIO2_INT_BASE, - }, -}; - -struct amba_device gpio_device[] = { - { - .dev = { - .init_name = "gpio0", - .platform_data = &gpio_plat_data[0], - }, - .res = { - .start = SPEAR6XX_CPU_GPIO_BASE, - .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_LOCAL_GPIO}, - }, { - .dev = { - .init_name = "gpio1", - .platform_data = &gpio_plat_data[1], - }, - .res = { - .start = SPEAR6XX_ICM3_GPIO_BASE, - .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_BASIC_GPIO}, - }, { - .dev = { - .init_name = "gpio2", - .platform_data = &gpio_plat_data[2], - }, - .res = { - .start = SPEAR6XX_ICM2_GPIO_BASE, - .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_APPL_GPIO}, - } -}; - -/* This will add devices, and do machine specific tasks */ -void __init spear6xx_init(void) -{ - /* nothing to do for now */ -} - -/* This will initialize vic */ -void __init spear6xx_init_irq(void) -{ - vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0); - vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0); -} /* Following will create static virtual/physical mappings */ static struct map_desc spear6xx_io_desc[] __initdata = { @@ -181,3 +91,33 @@ static void __init spear6xx_timer_init(void) struct sys_timer spear6xx_timer = { .init = spear6xx_timer_init, }; + +static void __init spear600_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *spear600_dt_board_compat[] = { + "st,spear600", + NULL +}; + +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { /* Sentinel */ } +}; + +static void __init spear6xx_dt_init_irq(void) +{ + of_irq_init(vic_of_match); +} + +DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)") + .map_io = spear6xx_map_io, + .init_irq = spear6xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear6xx_timer, + .init_machine = spear600_dt_init, + .restart = spear_restart, + .dt_compat = spear600_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 1dd2726986cf..d87d968115ec 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,6 +8,7 @@ obj-y += timer.o obj-y += pinmux.o obj-y += fuse.o obj-y += pmc.o +obj-y += flowctrl.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o @@ -18,6 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index e20b419d5983..0952494f481a 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -68,11 +68,11 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL), OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0", - &tegra_ehci1_device.dev.platform_data), + &tegra_ehci1_pdata), OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1", - &tegra_ehci2_device.dev.platform_data), + &tegra_ehci2_pdata), OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2", - &tegra_ehci3_device.dev.platform_data), + &tegra_ehci3_pdata), {} }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 96f6c0d030bd..5f7c03e972f3 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -56,7 +56,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { /* name parent rate enabled */ - { "uartd", "pll_p", 408000000, true }, + { "uarta", "pll_p", 408000000, true }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 2f86fcca64a6..22df10fb9972 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,6 +27,7 @@ #include <asm/hardware/gic.h> #include <mach/iomap.h> +#include <mach/powergate.h> #include "board.h" #include "clock.h" @@ -118,13 +119,16 @@ void __init tegra20_init_early(void) tegra_clk_init_from_table(tegra20_clk_init_table); tegra_init_cache(0x331, 0x441); tegra_pmc_init(); + tegra_powergate_init(); } #endif #ifdef CONFIG_ARCH_TEGRA_3x_SOC void __init tegra30_init_early(void) { + tegra_init_fuse(); tegra30_init_clocks(); tegra_init_cache(0x441, 0x551); tegra_pmc_init(); + tegra_powergate_init(); } #endif diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index bb5ce39b733b..7a065f0cf633 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -30,7 +30,6 @@ #include <linux/io.h> #include <linux/suspend.h> -#include <asm/system.h> #include <mach/clk.h> diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 7a2a02dbd632..5f6b867e20b4 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -23,7 +23,6 @@ #include <linux/fsl_devices.h> #include <linux/serial_8250.h> #include <linux/i2c-tegra.h> -#include <linux/platform_data/tegra_usb.h> #include <asm/pmu.h> #include <mach/irqs.h> #include <mach/iomap.h> @@ -446,18 +445,18 @@ static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { .clk = "cdev2", }; -static struct tegra_ehci_platform_data tegra_ehci1_pdata = { +struct tegra_ehci_platform_data tegra_ehci1_pdata = { .operating_mode = TEGRA_USB_OTG, .power_down_on_bus_suspend = 1, }; -static struct tegra_ehci_platform_data tegra_ehci2_pdata = { +struct tegra_ehci_platform_data tegra_ehci2_pdata = { .phy_config = &tegra_ehci2_ulpi_phy_config, .operating_mode = TEGRA_USB_HOST, .power_down_on_bus_suspend = 1, }; -static struct tegra_ehci_platform_data tegra_ehci3_pdata = { +struct tegra_ehci_platform_data tegra_ehci3_pdata = { .operating_mode = TEGRA_USB_HOST, .power_down_on_bus_suspend = 1, }; diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h index 873ecb2f8ae6..ec455679b219 100644 --- a/arch/arm/mach-tegra/devices.h +++ b/arch/arm/mach-tegra/devices.h @@ -20,6 +20,11 @@ #define __MACH_TEGRA_DEVICES_H #include <linux/platform_device.h> +#include <linux/platform_data/tegra_usb.h> + +extern struct tegra_ehci_platform_data tegra_ehci1_pdata; +extern struct tegra_ehci_platform_data tegra_ehci2_pdata; +extern struct tegra_ehci_platform_data tegra_ehci3_pdata; extern struct platform_device tegra_gpio_device; extern struct platform_device tegra_pinmux_device; diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c new file mode 100644 index 000000000000..fef66a7486ed --- /dev/null +++ b/arch/arm/mach-tegra/flowctrl.c @@ -0,0 +1,62 @@ +/* + * arch/arm/mach-tegra/flowctrl.c + * + * functions and macros to control the flowcontroller + * + * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> + +#include <mach/iomap.h> + +#include "flowctrl.h" + +u8 flowctrl_offset_halt_cpu[] = { + FLOW_CTRL_HALT_CPU0_EVENTS, + FLOW_CTRL_HALT_CPU1_EVENTS, + FLOW_CTRL_HALT_CPU1_EVENTS + 8, + FLOW_CTRL_HALT_CPU1_EVENTS + 16, +}; + +u8 flowctrl_offset_cpu_csr[] = { + FLOW_CTRL_CPU0_CSR, + FLOW_CTRL_CPU1_CSR, + FLOW_CTRL_CPU1_CSR + 8, + FLOW_CTRL_CPU1_CSR + 16, +}; + +static void flowctrl_update(u8 offset, u32 value) +{ + void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; + + writel(value, addr); + + /* ensure the update has reached the flow controller */ + wmb(); + readl_relaxed(addr); +} + +void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value) +{ + return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value); +} + +void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) +{ + return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value); +} diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 74c6efbe52fa..19428173855e 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -34,4 +34,9 @@ #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 +#ifndef __ASSEMBLY__ +void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value); +void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value); +#endif + #endif diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index c1afb2738769..f946d129423c 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -34,6 +34,7 @@ int tegra_sku_id; int tegra_cpu_process_id; int tegra_core_process_id; +int tegra_chip_id; enum tegra_revision tegra_revision; /* The BCT to use at boot is specified by board straps that can be read @@ -66,12 +67,9 @@ static inline bool get_spare_fuse(int bit) return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4); } -static enum tegra_revision tegra_get_revision(void) +static enum tegra_revision tegra_get_revision(u32 id) { - void __iomem *chip_id = IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804; - u32 id = readl(chip_id); u32 minor_rev = (id >> 16) & 0xf; - u32 chipid = (id >> 8) & 0xff; switch (minor_rev) { case 1: @@ -79,7 +77,8 @@ static enum tegra_revision tegra_get_revision(void) case 2: return TEGRA_REVISION_A02; case 3: - if (chipid == 0x20 && (get_spare_fuse(18) || get_spare_fuse(19))) + if (tegra_chip_id == TEGRA20 && + (get_spare_fuse(18) || get_spare_fuse(19))) return TEGRA_REVISION_A03p; else return TEGRA_REVISION_A03; @@ -92,6 +91,8 @@ static enum tegra_revision tegra_get_revision(void) void tegra_init_fuse(void) { + u32 id; + u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); reg |= 1 << 28; writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); @@ -108,10 +109,13 @@ void tegra_init_fuse(void) reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; - tegra_revision = tegra_get_revision(); + id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); + tegra_chip_id = (id >> 8) & 0xff; + + tegra_revision = tegra_get_revision(id); pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", - tegra_revision_name[tegra_get_revision()], + tegra_revision_name[tegra_revision], tegra_sku_id, tegra_cpu_process_id, tegra_core_process_id); } diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index d65d2abf803b..d2107b2cb85a 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -35,9 +35,13 @@ enum tegra_revision { #define SKU_ID_AP25E 27 #define SKU_ID_T25E 28 +#define TEGRA20 0x20 +#define TEGRA30 0x30 + extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; +extern int tegra_chip_id; extern enum tegra_revision tegra_revision; extern int tegra_bct_strapping; diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index b5349b2f13d2..fef9c2c51370 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -1,6 +1,23 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/cache.h> + +#include <mach/iomap.h> + +#include "flowctrl.h" +#include "reset.h" + +#define APB_MISC_GP_HIDREV 0x804 +#define PMC_SCRATCH41 0x140 + +#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) + + .macro mov32, reg, val + movw \reg, #:lower16:\val + movt \reg, #:upper16:\val + .endm + .section ".text.head", "ax" __CPUINIT @@ -47,15 +64,149 @@ ENTRY(v7_invalidate_l1) mov pc, lr ENDPROC(v7_invalidate_l1) + ENTRY(tegra_secondary_startup) - msr cpsr_fsxc, #0xd3 bl v7_invalidate_l1 - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - ldr r1, =0x6000f100 - str r0, [r1] -1: ldr r2, [r1] - cmp r0, r2 - beq 1b + /* Enable coresight */ + mov32 r0, 0xC5ACCE55 + mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) + + .align L1_CACHE_SHIFT +ENTRY(__tegra_cpu_reset_handler_start) + +/* + * __tegra_cpu_reset_handler: + * + * Common handler for all CPU reset events. + * + * Register usage within the reset handler: + * + * R7 = CPU present (to the OS) mask + * R8 = CPU in LP1 state mask + * R9 = CPU in LP2 state mask + * R10 = CPU number + * R11 = CPU mask + * R12 = pointer to reset handler data + * + * NOTE: This code is copied to IRAM. All code and data accesses + * must be position-independent. + */ + + .align L1_CACHE_SHIFT +ENTRY(__tegra_cpu_reset_handler) + + cpsid aif, 0x13 @ SVC mode, interrupts disabled + mrc p15, 0, r10, c0, c0, 5 @ MPIDR + and r10, r10, #0x3 @ R10 = CPU number + mov r11, #1 + mov r11, r11, lsl r10 @ R11 = CPU mask + adr r12, __tegra_cpu_reset_handler_data + +#ifdef CONFIG_SMP + /* Does the OS know about this CPU? */ + ldr r7, [r12, #RESET_DATA(MASK_PRESENT)] + tst r7, r11 @ if !present + bleq __die @ CPU not present (to OS) +#endif + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + bne 1f + /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ + mov32 r6, TEGRA_PMC_BASE + mov r0, #0 + cmp r10, #0 + strne r0, [r6, #PMC_SCRATCH41] +1: +#endif + +#ifdef CONFIG_SMP + /* + * Can only be secondary boot (initial or hotplug) but CPU 0 + * cannot be here. + */ + cmp r10, #0 + bleq __die @ CPU0 cannot be here + ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)] + cmp lr, #0 + bleq __die @ no secondary startup handler + bx lr +#endif + +/* + * We don't know why the CPU reset. Just kill it. + * The LR register will contain the address we died at + 4. + */ + +__die: + sub lr, lr, #4 + mov32 r7, TEGRA_PMC_BASE + str lr, [r7, #PMC_SCRATCH41] + + mov32 r7, TEGRA_CLK_RESET_BASE + + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + bne 1f + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + mov32 r0, 0x1111 + mov r1, r0, lsl r10 + str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET +#endif +1: +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + mov32 r6, TEGRA_FLOW_CTRL_BASE + + cmp r10, #0 + moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS + moveq r2, #FLOW_CTRL_CPU0_CSR + movne r1, r10, lsl #3 + addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8) + addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8) + + /* Clear CPU "event" and "interrupt" flags and power gate + it when halting but not before it is in the "WFI" state. */ + ldr r0, [r6, +r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, +r2] + + /* Unconditionally halt this CPU */ + mov r0, #FLOW_CTRL_WAITEVENT + str r0, [r6, +r1] + ldr r0, [r6, +r1] @ memory barrier + + dsb + isb + wfi @ CPU should be power gated here + + /* If the CPU didn't power gate above just kill it's clock. */ + + mov r0, r11, lsl #8 + str r0, [r7, #348] @ CLK_CPU_CMPLX_SET +#endif + + /* If the CPU still isn't dead, just spin here. */ + b . +ENDPROC(__tegra_cpu_reset_handler) + + .align L1_CACHE_SHIFT + .type __tegra_cpu_reset_handler_data, %object + .globl __tegra_cpu_reset_handler_data +__tegra_cpu_reset_handler_data: + .rept TEGRA_RESET_DATA_SIZE + .long 0 + .endr + .align L1_CACHE_SHIFT + +ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index f3294040d357..d8dc9ddd6d18 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> static inline void cpu_enter_lowpower(void) { diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 90069abd37bd..8ce0661b8a3d 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -26,7 +26,6 @@ #include <linux/serial_reg.h> -#include <mach/io.h> #include <mach/iomap.h> #include <mach/irammap.h> diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h index f15defffb5d2..fe700f9ce7dc 100644 --- a/arch/arm/mach-tegra/include/mach/io.h +++ b/arch/arm/mach-tegra/include/mach/io.h @@ -23,56 +23,8 @@ #define IO_SPACE_LIMIT 0xffff -/* On TEGRA, many peripherals are very closely packed in - * two 256MB io windows (that actually only use about 64KB - * at the start of each). - * - * We will just map the first 1MB of each window (to minimize - * pt entries needed) and provide a macro to transform physical - * io addresses to an appropriate void __iomem *. - * - */ - -#ifdef __ASSEMBLY__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - -#define IO_IRAM_PHYS 0x40000000 -#define IO_IRAM_VIRT IOMEM(0xFE400000) -#define IO_IRAM_SIZE SZ_256K - -#define IO_CPU_PHYS 0x50040000 -#define IO_CPU_VIRT IOMEM(0xFE000000) -#define IO_CPU_SIZE SZ_16K - -#define IO_PPSB_PHYS 0x60000000 -#define IO_PPSB_VIRT IOMEM(0xFE200000) -#define IO_PPSB_SIZE SZ_1M - -#define IO_APB_PHYS 0x70000000 -#define IO_APB_VIRT IOMEM(0xFE300000) -#define IO_APB_SIZE SZ_1M - -#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) -#define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst))) - -#define IO_TO_VIRT(n) ( \ - IO_TO_VIRT_BETWEEN((n), IO_PPSB_PHYS, IO_PPSB_SIZE) ? \ - IO_TO_VIRT_XLATE((n), IO_PPSB_PHYS, IO_PPSB_VIRT) : \ - IO_TO_VIRT_BETWEEN((n), IO_APB_PHYS, IO_APB_SIZE) ? \ - IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) : \ - IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ? \ - IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \ - IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \ - IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \ - NULL) - #ifndef __ASSEMBLER__ -#define IO_ADDRESS(n) (IO_TO_VIRT(n)) - #ifdef CONFIG_TEGRA_PCI extern void __iomem *tegra_pcie_io_base; @@ -88,7 +40,6 @@ static inline void __iomem *__io(unsigned long addr) #endif #define __io(a) __io(a) -#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 67644c905d8e..7e76da73121c 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -113,6 +113,9 @@ #define TEGRA_AHB_GIZMO_BASE 0x6000C004 #define TEGRA_AHB_GIZMO_SIZE 0x10C +#define TEGRA_SB_BASE 0x6000C200 +#define TEGRA_SB_SIZE 256 + #define TEGRA_STATMON_BASE 0x6000C400 #define TEGRA_STATMON_SIZE SZ_1K @@ -274,4 +277,46 @@ # define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE #endif +/* On TEGRA, many peripherals are very closely packed in + * two 256MB io windows (that actually only use about 64KB + * at the start of each). + * + * We will just map the first 1MB of each window (to minimize + * pt entries needed) and provide a macro to transform physical + * io addresses to an appropriate void __iomem *. + * + */ + +#define IO_IRAM_PHYS 0x40000000 +#define IO_IRAM_VIRT IOMEM(0xFE400000) +#define IO_IRAM_SIZE SZ_256K + +#define IO_CPU_PHYS 0x50040000 +#define IO_CPU_VIRT IOMEM(0xFE000000) +#define IO_CPU_SIZE SZ_16K + +#define IO_PPSB_PHYS 0x60000000 +#define IO_PPSB_VIRT IOMEM(0xFE200000) +#define IO_PPSB_SIZE SZ_1M + +#define IO_APB_PHYS 0x70000000 +#define IO_APB_VIRT IOMEM(0xFE300000) +#define IO_APB_SIZE SZ_1M + +#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst))) + +#define IO_TO_VIRT(n) ( \ + IO_TO_VIRT_BETWEEN((n), IO_PPSB_PHYS, IO_PPSB_SIZE) ? \ + IO_TO_VIRT_XLATE((n), IO_PPSB_PHYS, IO_PPSB_VIRT) : \ + IO_TO_VIRT_BETWEEN((n), IO_APB_PHYS, IO_APB_SIZE) ? \ + IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) : \ + IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ? \ + IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \ + IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \ + IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \ + NULL) + +#define IO_ADDRESS(n) (IO_TO_VIRT(n)) + #endif diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h index 39c396d2ddb0..4752b1a68f35 100644 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ b/arch/arm/mach-tegra/include/mach/powergate.h @@ -27,8 +27,21 @@ #define TEGRA_POWERGATE_VDEC 4 #define TEGRA_POWERGATE_L2 5 #define TEGRA_POWERGATE_MPE 6 -#define TEGRA_NUM_POWERGATE 7 +#define TEGRA_POWERGATE_HEG 7 +#define TEGRA_POWERGATE_SATA 8 +#define TEGRA_POWERGATE_CPU1 9 +#define TEGRA_POWERGATE_CPU2 10 +#define TEGRA_POWERGATE_CPU3 11 +#define TEGRA_POWERGATE_CELP 12 +#define TEGRA_POWERGATE_3D1 13 +#define TEGRA_POWERGATE_CPU0 TEGRA_POWERGATE_CPU +#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D + +int __init tegra_powergate_init(void); + +int tegra_cpu_powergate_id(int cpuid); +int tegra_powergate_is_powered(int id); int tegra_powergate_power_on(int id); int tegra_powergate_power_off(int id); int tegra_powergate_remove_clamping(int id); diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index d23ee2db2827..58b4baf9c483 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -26,6 +26,7 @@ #include <asm/page.h> #include <asm/mach/map.h> +#include <mach/iomap.h> #include "board.h" diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 7d2b5d03c1df..1a208dbf682f 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -24,19 +24,31 @@ #include <asm/mach-types.h> #include <asm/smp_scu.h> +#include <mach/clk.h> #include <mach/iomap.h> +#include <mach/powergate.h> + +#include "fuse.h" +#include "flowctrl.h" +#include "reset.h" extern void tegra_secondary_startup(void); -static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE); #define EVP_CPU_RESET_VECTOR \ (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) #define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c) +#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \ + (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340) #define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344) +#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \ + (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c) + +#define CPU_CLOCK(cpu) (0x1<<(8+cpu)) +#define CPU_RESET(cpu) (0x1111ul<<(cpu)) void __cpuinit platform_secondary_init(unsigned int cpu) { @@ -47,63 +59,106 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ gic_secondary_init(0); - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int tegra20_power_up_cpu(unsigned int cpu) { - unsigned long old_boot_vector; - unsigned long boot_vector; - unsigned long timeout; u32 reg; - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); + /* Enable the CPU clock. */ + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + barrier(); + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + /* Clear flow controller CSR. */ + flowctrl_write_cpu_csr(cpu, 0); - /* set the reset vector to point to the secondary_startup routine */ + return 0; +} - boot_vector = virt_to_phys(tegra_secondary_startup); - old_boot_vector = readl(EVP_CPU_RESET_VECTOR); - writel(boot_vector, EVP_CPU_RESET_VECTOR); +static int tegra30_power_up_cpu(unsigned int cpu) +{ + u32 reg; + int ret, pwrgateid; + unsigned long timeout; - /* enable cpu clock on cpu1 */ - reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - writel(reg & ~(1<<9), CLK_RST_CONTROLLER_CLK_CPU_CMPLX); + pwrgateid = tegra_cpu_powergate_id(cpu); + if (pwrgateid < 0) + return pwrgateid; + + /* If this is the first boot, toggle powergates directly. */ + if (!tegra_powergate_is_powered(pwrgateid)) { + ret = tegra_powergate_power_on(pwrgateid); + if (ret) + return ret; + + /* Wait for the power to come up. */ + timeout = jiffies + 10*HZ; + while (tegra_powergate_is_powered(pwrgateid)) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + udelay(10); + } + } - reg = (1<<13) | (1<<9) | (1<<5) | (1<<1); - writel(reg, CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); + /* CPU partition is powered. Enable the CPU clock. */ + writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); + udelay(10); - smp_wmb(); - flush_cache_all(); + /* Remove I/O clamps. */ + ret = tegra_powergate_remove_clamping(pwrgateid); + udelay(10); - /* unhalt the cpu */ - writel(0, IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + 0x14); + /* Clear flow controller CSR. */ + flowctrl_write_cpu_csr(cpu, 0); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (readl(EVP_CPU_RESET_VECTOR) != boot_vector) - break; - udelay(10); - } + return 0; +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int status; - /* put the old boot vector back */ - writel(old_boot_vector, EVP_CPU_RESET_VECTOR); + /* + * Force the CPU into reset. The CPU must remain in reset when the + * flow controller state is cleared (which will cause the flow + * controller to stop driving reset if the CPU has been power-gated + * via the flow controller). This will have no effect on first boot + * of the CPU since it should already be in reset. + */ + writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET); + dmb(); /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish + * Unhalt the CPU. If the flow controller was used to power-gate the + * CPU this will cause the flow controller to stop driving reset. + * The CPU will remain in reset because the clock and reset block + * is now driving reset. */ - spin_unlock(&boot_lock); + flowctrl_write_cpu_halt(cpu, 0); + + switch (tegra_chip_id) { + case TEGRA20: + status = tegra20_power_up_cpu(cpu); + break; + case TEGRA30: + status = tegra30_power_up_cpu(cpu); + break; + default: + status = -EINVAL; + break; + } - return 0; + if (status) + goto done; + + /* Take the CPU out of reset. */ + writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); + wmb(); +done: + return status; } /* @@ -128,6 +183,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - + tegra_cpu_reset_handler_init(); scu_enable(scu_base); } diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index 948306491a59..c238699ae86f 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -31,6 +31,8 @@ #include <mach/iomap.h> #include <mach/powergate.h> +#include "fuse.h" + #define PWRGATE_TOGGLE 0x30 #define PWRGATE_TOGGLE_START (1 << 8) @@ -38,6 +40,16 @@ #define PWRGATE_STATUS 0x38 +static int tegra_num_powerdomains; +static int tegra_num_cpu_domains; +static u8 *tegra_cpu_domains; +static u8 tegra30_cpu_domains[] = { + TEGRA_POWERGATE_CPU0, + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; + static DEFINE_SPINLOCK(tegra_powergate_lock); static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); @@ -75,7 +87,7 @@ static int tegra_powergate_set(int id, bool new_state) int tegra_powergate_power_on(int id) { - if (id < 0 || id >= TEGRA_NUM_POWERGATE) + if (id < 0 || id >= tegra_num_powerdomains) return -EINVAL; return tegra_powergate_set(id, true); @@ -83,17 +95,18 @@ int tegra_powergate_power_on(int id) int tegra_powergate_power_off(int id) { - if (id < 0 || id >= TEGRA_NUM_POWERGATE) + if (id < 0 || id >= tegra_num_powerdomains) return -EINVAL; return tegra_powergate_set(id, false); } -static bool tegra_powergate_is_powered(int id) +int tegra_powergate_is_powered(int id) { u32 status; - WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE); + if (id < 0 || id >= tegra_num_powerdomains) + return -EINVAL; status = pmc_read(PWRGATE_STATUS) & (1 << id); return !!status; @@ -103,7 +116,7 @@ int tegra_powergate_remove_clamping(int id) { u32 mask; - if (id < 0 || id >= TEGRA_NUM_POWERGATE) + if (id < 0 || id >= tegra_num_powerdomains) return -EINVAL; /* @@ -156,6 +169,34 @@ err_power: return ret; } +int tegra_cpu_powergate_id(int cpuid) +{ + if (cpuid > 0 && cpuid < tegra_num_cpu_domains) + return tegra_cpu_domains[cpuid]; + + return -EINVAL; +} + +int __init tegra_powergate_init(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + tegra_num_powerdomains = 7; + break; + case TEGRA30: + tegra_num_powerdomains = 14; + tegra_num_cpu_domains = 4; + tegra_cpu_domains = tegra30_cpu_domains; + break; + default: + /* Unknown Tegra variant. Disable powergating */ + tegra_num_powerdomains = 0; + break; + } + + return 0; +} + #ifdef CONFIG_DEBUG_FS static const char * const powergate_name[] = { @@ -175,7 +216,7 @@ static int powergate_show(struct seq_file *s, void *data) seq_printf(s, " powergate powered\n"); seq_printf(s, "------------------\n"); - for (i = 0; i < TEGRA_NUM_POWERGATE; i++) + for (i = 0; i < tegra_num_powerdomains; i++) seq_printf(s, " %9s %7s\n", powergate_name[i], tegra_powergate_is_powered(i) ? "yes" : "no"); return 0; diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c new file mode 100644 index 000000000000..4d6a2ee99c3b --- /dev/null +++ b/arch/arm/mach-tegra/reset.c @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-tegra/reset.c + * + * Copyright (C) 2011,2012 NVIDIA Corporation. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/cpumask.h> +#include <linux/bitops.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> + +#include <mach/iomap.h> +#include <mach/irammap.h> + +#include "reset.h" +#include "fuse.h" + +#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \ + TEGRA_IRAM_RESET_HANDLER_OFFSET) + +static bool is_enabled; + +static void tegra_cpu_reset_handler_enable(void) +{ + void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); + void __iomem *evp_cpu_reset = + IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100); + void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE); + u32 reg; + + BUG_ON(is_enabled); + BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE); + + memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start, + tegra_cpu_reset_handler_size); + + /* + * NOTE: This must be the one and only write to the EVP CPU reset + * vector in the entire system. + */ + writel(TEGRA_IRAM_RESET_BASE + tegra_cpu_reset_handler_offset, + evp_cpu_reset); + wmb(); + reg = readl(evp_cpu_reset); + + /* + * Prevent further modifications to the physical reset vector. + * NOTE: Has no effect on chips prior to Tegra30. + */ + if (tegra_chip_id != TEGRA20) { + reg = readl(sb_ctrl); + reg |= 2; + writel(reg, sb_ctrl); + wmb(); + } + + is_enabled = true; +} + +void __init tegra_cpu_reset_handler_init(void) +{ + +#ifdef CONFIG_SMP + __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = + *((u32 *)cpu_present_mask); + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] = + virt_to_phys((void *)tegra_secondary_startup); +#endif + + tegra_cpu_reset_handler_enable(); +} diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h new file mode 100644 index 000000000000..de88bf851dd3 --- /dev/null +++ b/arch/arm/mach-tegra/reset.h @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-tegra/reset.h + * + * CPU reset dispatcher. + * + * Copyright (c) 2011, NVIDIA Corporation. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_RESET_H +#define __MACH_TEGRA_RESET_H + +#define TEGRA_RESET_MASK_PRESENT 0 +#define TEGRA_RESET_MASK_LP1 1 +#define TEGRA_RESET_MASK_LP2 2 +#define TEGRA_RESET_STARTUP_SECONDARY 3 +#define TEGRA_RESET_STARTUP_LP2 4 +#define TEGRA_RESET_STARTUP_LP1 5 +#define TEGRA_RESET_DATA_SIZE 6 + +#ifndef __ASSEMBLY__ + +extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; + +void __tegra_cpu_reset_handler_start(void); +void __tegra_cpu_reset_handler(void); +void __tegra_cpu_reset_handler_end(void); +void tegra_secondary_startup(void); + +#define tegra_cpu_reset_handler_offset \ + ((u32)__tegra_cpu_reset_handler - \ + (u32)__tegra_cpu_reset_handler_start) + +#define tegra_cpu_reset_handler_size \ + (__tegra_cpu_reset_handler_end - \ + __tegra_cpu_reset_handler_start) + +void __init tegra_cpu_reset_handler_init(void); + +#endif +#endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 8f9fde161c34..5b20197bae7f 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -23,7 +23,9 @@ */ #include <linux/linkage.h> -#include <mach/io.h> + +#include <asm/assembler.h> + #include <mach/iomap.h> #include "flowctrl.h" diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 8b90c44d237f..1621ad07d284 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1544,6 +1544,8 @@ static struct fsmc_nand_platform_data nand_platform_data = { .nr_partitions = ARRAY_SIZE(u300_partitions), .options = NAND_SKIP_BBTSCAN, .width = FSMC_NAND_BW8, + .ale_off = PLAT_NAND_ALE, + .cle_off = PLAT_NAND_CLE, }; static struct platform_device nand_device = { diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h deleted file mode 100644 index 5d6b4c13b3a0..000000000000 --- a/arch/arm/mach-u300/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/io.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Dummy IO map for being able to use writew()/readw(), - * writel()/readw() and similar accessor functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 035fdc9dbdb0..65f87c523892 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -18,18 +18,17 @@ * the defines are used for setting up the I/O memory mapping. */ -#ifdef __ASSEMBLER__ -#define IOMEM(a) (a) -#else -#define IOMEM(a) (void __iomem *) a -#endif - /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 /* NFIF */ #define U300_NAND_IF_PHYS_BASE 0x9f800000 +/* ALE, CLE offset for FSMC NAND */ +#define PLAT_NAND_CLE (1 << 16) +#define PLAT_NAND_ALE (1 << 17) + + /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 9ec635812349..880d02ec89d4 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -27,6 +27,7 @@ config MACH_MOP500 select UX500_SOC_DB8500 select I2C select I2C_NOMADIK + select SOC_BUS help Include support for the MOP500 development platform. @@ -57,6 +58,12 @@ config UX500_AUTO_PLATFORM At least one platform needs to be selected in order to build a working kernel. If everything else is disabled, this automatically enables MACH_MOP500. + +config MACH_UX500_DT + bool "Generic U8500 support using device tree" + depends on MACH_MOP500 + select USE_OF + endmenu config UX500_DEBUG_UART diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index ff0a4b5b0a82..dd5cd00e2554 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -2,3 +2,4 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 +dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 1daead3e583e..920251cf834c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -99,7 +99,7 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -static void sdi0_configure(void) +static void sdi0_configure(struct device *parent) { int ret; @@ -118,15 +118,15 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_en, 1); /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } -void mop500_sdi_tc35892_init(void) +void mop500_sdi_tc35892_init(struct device *parent) { mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; sdi0_en = GPIO_SDMMC_EN; sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; - sdi0_configure(); + sdi0_configure(parent); } /* @@ -241,12 +241,13 @@ static struct mmci_platform_data mop500_sdi4_data = { #endif }; -void __init mop500_sdi_init(void) +void __init mop500_sdi_init(struct device *parent) { /* PoP:ed eMMC */ - db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls @@ -254,31 +255,31 @@ void __init mop500_sdi_init(void) */ } -void __init snowball_sdi_init(void) +void __init snowball_sdi_init(struct device *parent) { /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; sdi0_en = SNOWBALL_SDMMC_EN_GPIO; sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; - sdi0_configure(); + sdi0_configure(parent); } -void __init hrefv60_sdi_init(void) +void __init hrefv60_sdi_init(struct device *parent) { /* PoP:ed eMMC */ - db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; sdi0_en = HREFV60_SDMMC_EN_GPIO; sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; - sdi0_configure(); + sdi0_configure(parent); /* WLAN SDIO channel */ - db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 6d672a556df8..77d03c1fbd04 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -30,6 +30,9 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_platform.h> + #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -226,7 +229,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = { static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) { - mop500_sdi_tc35892_init(); + struct device *parent = NULL; +#if 0 + /* FIXME: Is the sdi actually part of tc3589x? */ + parent = tc3589x->dev; +#endif + mop500_sdi_tc35892_init(parent); } static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { @@ -353,12 +361,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -static void __init mop500_i2c_init(void) +static void __init mop500_i2c_init(struct device *parent) { - db8500_add_i2c0(&u8500_i2c0_data); - db8500_add_i2c1(&u8500_i2c1_data); - db8500_add_i2c2(&u8500_i2c2_data); - db8500_add_i2c3(&u8500_i2c3_data); + db8500_add_i2c0(parent, &u8500_i2c0_data); + db8500_add_i2c1(parent, &u8500_i2c1_data); + db8500_add_i2c2(parent, &u8500_i2c2_data); + db8500_add_i2c3(parent, &u8500_i2c3_data); } static struct gpio_keys_button mop500_gpio_keys[] = { @@ -435,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { }; #endif -static struct pl022_ssp_controller ssp0_platform_data = { +static struct pl022_ssp_controller ssp0_plat = { .bus_id = 0, #ifdef CONFIG_STE_DMA40 .enable_dma = 1, @@ -451,9 +459,9 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; -static void __init mop500_spi_init(void) +static void __init mop500_spi_init(struct device *parent) { - db8500_add_ssp0(&ssp0_platform_data); + db8500_add_ssp0(parent, &ssp0_plat); } #ifdef CONFIG_STE_DMA40 @@ -587,11 +595,11 @@ static struct amba_pl011_data uart2_plat = { #endif }; -static void __init mop500_uart_init(void) +static void __init mop500_uart_init(struct device *parent) { - db8500_add_uart0(&uart0_plat); - db8500_add_uart1(&uart1_plat); - db8500_add_uart2(&uart2_plat); + db8500_add_uart0(parent, &uart0_plat); + db8500_add_uart1(parent, &uart1_plat); + db8500_add_uart2(parent, &uart2_plat); } static struct platform_device *snowball_platform_devs[] __initdata = { @@ -603,21 +611,27 @@ static struct platform_device *snowball_platform_devs[] __initdata = { static void __init mop500_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - u8500_init_devices(); + parent = u8500_init_devices(); mop500_pins_init(); + /* FIXME: parent of ab8500 should be prcmu */ + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - mop500_i2c_init(); - mop500_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + mop500_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -631,19 +645,24 @@ static void __init mop500_init_machine(void) static void __init snowball_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; - u8500_init_devices(); + parent = u8500_init_devices(); snowball_pins_init(); + for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) + snowball_platform_devs[i]->dev.parent = parent; + platform_add_devices(snowball_platform_devs, ARRAY_SIZE(snowball_platform_devs)); - mop500_i2c_init(); - snowball_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + snowball_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); @@ -656,7 +675,9 @@ static void __init snowball_init_machine(void) static void __init hrefv60_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; /* * The HREFv60 board removed a GPIO expander and routed @@ -665,17 +686,20 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - u8500_init_devices(); + parent = u8500_init_devices(); hrefv60_pins_init(); + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - mop500_i2c_init(); - hrefv60_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + hrefv60_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -718,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, MACHINE_END + +#ifdef CONFIG_MACH_UX500_DT + +struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + {}, +}; + +static const struct of_device_id u8500_soc_node[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { }, +}; + +static void __init u8500_init_machine(void) +{ + struct device *parent = NULL; + int i2c0_devs; + int i; + + parent = u8500_init_devices(); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) + snowball_platform_devs[i]->dev.parent = parent; + + /* automatically probe child nodes of db8500 device */ + of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent); + + if (of_machine_is_compatible("st-ericsson,mop500")) { + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_sdi_init(parent); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + snowball_pins_init(); + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + snowball_sdi_init(parent); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { + /* + * The HREFv60 board removed a GPIO expander and routed + * all these GPIO pins to the internal GPIO controller + * instead. + */ + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + hrefv60_pins_init(); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + hrefv60_sdi_init(parent); + } + mop500_i2c_init(parent); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static const char * u8500_dt_board_compat[] = { + "calaosystems,snowball-a9500", + "st-ericsson,hrefv60+", + "st-ericsson,u8500", + "st-ericsson,mop500", + NULL, +}; + + +DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = u8500_init_machine, + .dt_compat = u8500_dt_board_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 7ff6cbffc104..fdcfa8721bb4 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -75,10 +75,10 @@ struct i2c_board_info; -extern void mop500_sdi_init(void); -extern void snowball_sdi_init(void); -extern void hrefv60_sdi_init(void); -extern void mop500_sdi_tc35892_init(void); +extern void mop500_sdi_init(struct device *parent); +extern void snowball_sdi_init(struct device *parent); +extern void hrefv60_sdi_init(struct device *parent); +extern void mop500_sdi_tc35892_init(struct device *parent); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); void __init mop500_pins_init(void); diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 63c3f8058ffc..836112eedde7 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = { #endif }; -void __init u5500_sdi_init(void) +void __init u5500_sdi_init(struct device *parent) { nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); - db5500_add_sdi0(&u5500_sdi0_data); + db5500_add_sdi0(parent, &u5500_sdi0_data); } diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 9de9e9c4dbbb..0ff4be72a809 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = { }, }; -static void __init u5500_i2c_init(void) +static void __init u5500_i2c_init(struct device *parent) { - db5500_add_i2c2(&u5500_i2c2_data); + db5500_add_i2c2(parent, &u5500_i2c2_data); i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); } @@ -126,20 +126,27 @@ static struct platform_device *u5500_platform_devices[] __initdata = { &ab5500_device, }; -static void __init u5500_uart_init(void) +static void __init u5500_uart_init(struct device *parent) { - db5500_add_uart0(NULL); - db5500_add_uart1(NULL); - db5500_add_uart2(NULL); + db5500_add_uart0(parent, NULL); + db5500_add_uart1(parent, NULL); + db5500_add_uart2(parent, NULL); } static void __init u5500_init_machine(void) { - u5500_init_devices(); + struct device *parent = NULL; + int i; + + parent = u5500_init_devices(); nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); - u5500_i2c_init(); - u5500_sdi_init(); - u5500_uart_init(); + + u5500_i2c_init(parent); + u5500_sdi_init(parent); + u5500_uart_init(parent); + + for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++) + u5500_platform_devices[i]->dev.parent = parent; platform_add_devices(u5500_platform_devices, ARRAY_SIZE(u5500_platform_devices)); diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index da5569d83d58..77a75ed0df67 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -5,6 +5,8 @@ */ #include <linux/io.h> +#include <linux/of.h> + #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <mach/hardware.h> @@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void) ux500_l2x0_unlock(); /* 64KB way size, 8 way associativity, force WA */ - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + if (of_have_populated_dt()) + l2x0_of_init(0x3e060000, 0xc0000fff); + else + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); /* * We can't disable l2 as we are in non secure mode, currently diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 18aa5c05c69e..bca47f32082f 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = { U5500_GPIOBANK7_BASE, }; -static void __init db5500_add_gpios(void) +static void __init db5500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { /* No custom data yet */ }; - dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base), + dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base), IRQ_DB5500_GPIO0, &pdata); } @@ -212,14 +212,36 @@ static int usb_db5500_tx_dma_cfg[] = { DB5500_DMA_DEV38_USB_OTG_OEP_8 }; -void __init u5500_init_devices(void) +static const char *db5500_read_soc_id(void) { - db5500_add_gpios(); + return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n"); +} + +static struct device * __init db5500_soc_device_init(void) +{ + const char *soc_id = db5500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + +struct device * __init u5500_init_devices(void) +{ + struct device *parent; + int i; + + parent = db5500_soc_device_init(); + + db5500_add_gpios(parent); db5500_pmu_init(); - db5500_dma_init(); - db5500_add_rtc(); - db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); + db5500_dma_init(parent); + db5500_add_rtc(parent); + db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); + + for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++) + db5500_platform_devs[i]->dev.parent = parent; platform_add_devices(db5500_platform_devs, ARRAY_SIZE(db5500_platform_devs)); + + return parent; } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 7176ee7491ab..9bd8163896cf 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -24,6 +24,7 @@ #include <mach/setup.h> #include <mach/devices.h> #include <mach/usb.h> +#include <mach/db8500-regs.h> #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -132,13 +133,13 @@ static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK8_BASE, }; -static void __init db8500_add_gpios(void) +static void __init db8500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { .supports_sleepmode = true, }; - dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), + dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); } @@ -164,17 +165,44 @@ static int usb_db8500_tx_dma_cfg[] = { DB8500_DMA_DEV39_USB_OTG_OEP_8 }; +static const char *db8500_read_soc_id(void) +{ + void __iomem *uid = __io_address(U8500_BB_UID_BASE); + + return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + readl((u32 *)uid+1), + readl((u32 *)uid+1), readl((u32 *)uid+2), + readl((u32 *)uid+3), readl((u32 *)uid+4)); +} + +static struct device * __init db8500_soc_device_init(void) +{ + const char *soc_id = db8500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + /* * This function is called from the board init */ -void __init u8500_init_devices(void) +struct device * __init u8500_init_devices(void) { - db8500_add_rtc(); - db8500_add_gpios(); - db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + struct device *parent; + int i; + + parent = db8500_soc_device_init(); + + db8500_add_rtc(parent); + db8500_add_gpios(parent); + db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + + platform_device_register_data(parent, + "cpufreq-u8500", -1, NULL, 0); + + for (i = 0; i < ARRAY_SIZE(platform_devs); i++) + platform_devs[i]->dev.parent = parent; - platform_device_register_simple("cpufreq-u8500", -1, NULL, 0); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - return ; + return parent; } diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 851308bf6424..d11f3892a27d 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -2,6 +2,7 @@ * Copyright (C) ST-Ericsson SA 2010 * * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 */ @@ -11,6 +12,12 @@ #include <linux/mfd/db8500-prcmu.h> #include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/sys_soc.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/of.h> +#include <linux/of_irq.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> @@ -23,6 +30,11 @@ void __iomem *_PRCMU_BASE; +static const struct of_device_id ux500_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; + void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -37,7 +49,12 @@ void __init ux500_init_irq(void) } else ux500_unknown_soc(); - gic_init(0, 29, dist_base, cpu_base); +#ifdef CONFIG_OF + if (of_have_populated_dt()) + of_irq_init(ux500_dt_irq_match); + else +#endif + gic_init(0, 29, dist_base, cpu_base); /* * Init clocks here so that they are available for system timer @@ -49,3 +66,73 @@ void __init ux500_init_irq(void) db8500_prcmu_early_init(); clk_init(); } + +static const char * __init ux500_get_machine(void) +{ + return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); +} + +static const char * __init ux500_get_family(void) +{ + return kasprintf(GFP_KERNEL, "ux500"); +} + +static const char * __init ux500_get_revision(void) +{ + unsigned int rev = dbx500_revision(); + + if (rev == 0x01) + return kasprintf(GFP_KERNEL, "%s", "ED"); + else if (rev >= 0xA0) + return kasprintf(GFP_KERNEL, "%d.%d", + (rev >> 4) - 0xA + 1, rev & 0xf); + + return kasprintf(GFP_KERNEL, "%s", "Unknown"); +} + +static ssize_t ux500_get_process(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + if (dbx500_id.process == 0x00) + return sprintf(buf, "Standard\n"); + + return sprintf(buf, "%02xnm\n", dbx500_id.process); +} + +static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, + const char *soc_id) +{ + soc_dev_attr->soc_id = soc_id; + soc_dev_attr->machine = ux500_get_machine(); + soc_dev_attr->family = ux500_get_family(); + soc_dev_attr->revision = ux500_get_revision(); +} + +struct device_attribute ux500_soc_attr = + __ATTR(process, S_IRUGO, ux500_get_process, NULL); + +struct device * __init ux500_soc_device_init(const char *soc_id) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return ERR_PTR(-ENOMEM); + + soc_info_populate(soc_dev_attr, soc_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return NULL; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &ux500_soc_attr); + + return parent; +} diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 898a64517b09..c5312a4b49f5 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -20,8 +20,9 @@ #include "devices-common.h" struct amba_device * -dbx500_add_amba_device(const char *name, resource_size_t base, - int irq, void *pdata, unsigned int periphid) +dbx500_add_amba_device(struct device *parent, const char *name, + resource_size_t base, int irq, void *pdata, + unsigned int periphid) { struct amba_device *dev; int ret; @@ -39,6 +40,8 @@ dbx500_add_amba_device(const char *name, resource_size_t base, dev->dev.platform_data = pdata; + dev->dev.parent = parent; + ret = amba_device_add(dev, &iomem_resource); if (ret) { amba_device_put(dev); @@ -49,60 +52,7 @@ dbx500_add_amba_device(const char *name, resource_size_t base, } static struct platform_device * -dbx500_add_platform_device(const char *name, int id, void *pdata, - struct resource *res, int resnum) -{ - struct platform_device *dev; - int ret; - - dev = platform_device_alloc(name, id); - if (!dev) - return ERR_PTR(-ENOMEM); - - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - - ret = platform_device_add_resources(dev, res, resnum); - if (ret) - goto out_free; - - dev->dev.platform_data = pdata; - - ret = platform_device_add(dev); - if (ret) - goto out_free; - - return dev; - -out_free: - platform_device_put(dev); - return ERR_PTR(ret); -} - -struct platform_device * -dbx500_add_platform_device_4k1irq(const char *name, int id, - resource_size_t base, - int irq, void *pdata) -{ - struct resource resources[] = { - [0] = { - .start = base, - .end = base + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return dbx500_add_platform_device(name, id, pdata, resources, - ARRAY_SIZE(resources)); -} - -static struct platform_device * -dbx500_add_gpio(int id, resource_size_t addr, int irq, +dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, struct nmk_gpio_platform_data *pdata) { struct resource resources[] = { @@ -118,13 +68,18 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq, } }; - return platform_device_register_resndata(NULL, "gpio", id, - resources, ARRAY_SIZE(resources), - pdata, sizeof(*pdata)); + return platform_device_register_resndata( + parent, + "gpio", + id, + resources, + ARRAY_SIZE(resources), + pdata, + sizeof(*pdata)); } -void dbx500_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata) +void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, + int irq, struct nmk_gpio_platform_data *pdata) { int first = 0; int i; @@ -134,6 +89,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq, pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); pdata->num_gpio = 32; - dbx500_add_gpio(i, base[i], irq, pdata); + dbx500_add_gpio(parent, i, base[i], irq, pdata); } } diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7825705033bf..39c74ec82add 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -8,80 +8,89 @@ #ifndef __DEVICES_COMMON_H #define __DEVICES_COMMON_H -extern struct amba_device * -dbx500_add_amba_device(const char *name, resource_size_t base, - int irq, void *pdata, unsigned int periphid); +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/sys_soc.h> +#include <plat/i2c.h> -extern struct platform_device * -dbx500_add_platform_device_4k1irq(const char *name, int id, - resource_size_t base, - int irq, void *pdata); +extern struct amba_device * +dbx500_add_amba_device(struct device *parent, const char *name, + resource_size_t base, int irq, void *pdata, + unsigned int periphid); struct spi_master_cntlr; static inline struct amba_device * -dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, +dbx500_add_msp_spi(struct device *parent, const char *name, + resource_size_t base, int irq, struct spi_master_cntlr *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, 0); } static inline struct amba_device * -dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata, +dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, + int irq, struct spi_master_cntlr *pdata, u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, periphid); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * -dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata, - u32 periphid) +dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, + int irq, struct mmci_platform_data *pdata, u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, periphid); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, periphid); } struct amba_pl011_data; static inline struct amba_device * -dbx500_add_uart(const char *name, resource_size_t base, int irq, - struct amba_pl011_data *pdata) +dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, + int irq, struct amba_pl011_data *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); } struct nmk_i2c_controller; static inline struct platform_device * -dbx500_add_i2c(int id, resource_size_t base, int irq, - struct nmk_i2c_controller *pdata) -{ - return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq, - pdata); -} - -struct msp_i2s_platform_data; - -static inline struct platform_device * -dbx500_add_msp_i2s(int id, resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) +dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, + struct nmk_i2c_controller *data) { - return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq, - pdata); + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + struct platform_device_info pdevinfo = { + .parent = parent, + .name = "nmk-i2c", + .id = id, + .res = res, + .num_res = ARRAY_SIZE(res), + .data = data, + .size_data = sizeof(*data), + .dma_mask = DMA_BIT_MASK(32), + }; + + return platform_device_register_full(&pdevinfo); } static inline struct amba_device * -dbx500_add_rtc(resource_size_t base, int irq) +dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) { - return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0); + return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0); } struct nmk_gpio_platform_data; -void dbx500_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata); +void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, + int irq, struct nmk_gpio_platform_data *pdata); #endif diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 0c4bccd02b90..e70955502c35 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -10,70 +10,90 @@ #include "devices-common.h" -#define db5500_add_i2c1(pdata) \ - dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) -#define db5500_add_i2c2(pdata) \ - dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) -#define db5500_add_i2c3(pdata) \ - dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) +#define db5500_add_i2c1(parent, pdata) \ + dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) +#define db5500_add_i2c2(parent, pdata) \ + dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) +#define db5500_add_i2c3(parent, pdata) \ + dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) -#define db5500_add_msp0_i2s(pdata) \ - dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_i2s(pdata) \ - dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_i2s(pdata) \ - dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) +#define db5500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ + IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ + IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ + IRQ_DB5500_MSP2, pdata) -#define db5500_add_msp0_spi(pdata) \ - dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(pdata) \ - dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(pdata) \ - dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) +#define db5500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ + IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ + IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ + IRQ_DB5500_MSP2, pdata) -#define db5500_add_rtc() \ - dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC); +#define db5500_add_rtc(parent) \ + dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC); -#define db5500_add_usb(rx_cfg, tx_cfg) \ - ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) +#define db5500_add_usb(parent, rx_cfg, tx_cfg) \ + ux500_add_usb(parent, U5500_USBOTG_BASE, \ + IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) -#define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ +#define db5500_add_sdi0(parent, pdata) \ + dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \ + IRQ_DB5500_SDMMC0, pdata, \ 0x10480180) -#define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ +#define db5500_add_sdi1(parent, pdata) \ + dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \ + IRQ_DB5500_SDMMC1, pdata, \ 0x10480180) -#define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ +#define db5500_add_sdi2(parent, pdata) \ + dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \ + IRQ_DB5500_SDMMC2, pdata \ 0x10480180) -#define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ +#define db5500_add_sdi3(parent, pdata) \ + dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \ + IRQ_DB5500_SDMMC3, pdata \ 0x10480180) -#define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ +#define db5500_add_sdi4(parent, pdata) \ + dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \ + IRQ_DB5500_SDMMC4, pdata \ 0x10480180) /* This one has a bad peripheral ID in the U5500 silicon */ -#define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ +#define db5500_add_spi0(parent, pdata) \ + dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \ + IRQ_DB5500_SPI0, pdata, \ 0x10080023) -#define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ +#define db5500_add_spi1(parent, pdata) \ + dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \ + IRQ_DB5500_SPI1, pdata, \ 0x10080023) -#define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ +#define db5500_add_spi2(parent, pdata) \ + dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \ + IRQ_DB5500_SPI2, pdata \ 0x10080023) -#define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ +#define db5500_add_spi3(parent, pdata) \ + dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \ + IRQ_DB5500_SPI3, pdata \ 0x10080023) -#define db5500_add_uart0(plat) \ - dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) -#define db5500_add_uart1(plat) \ - dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat) -#define db5500_add_uart2(plat) \ - dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat) -#define db5500_add_uart3(plat) \ - dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat) +#define db5500_add_uart0(parent, plat) \ + dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \ + IRQ_DB5500_UART0, plat) +#define db5500_add_uart1(parent, plat) \ + dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \ + IRQ_DB5500_UART1, plat) +#define db5500_add_uart2(parent, plat) \ + dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \ + IRQ_DB5500_UART2, plat) +#define db5500_add_uart3(parent, plat) \ + dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \ + IRQ_DB5500_UART3, plat) #endif diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index cbd4a9ae8109..9fd93e9da529 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -14,88 +14,114 @@ struct ske_keypad_platform_data; struct pl022_ssp_controller; static inline struct platform_device * -db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata) +db8500_add_ske_keypad(struct device *parent, + struct ske_keypad_platform_data *pdata, + size_t size) { - return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1, - U8500_SKE_BASE, - IRQ_DB8500_KB, pdata); + struct resource resources[] = { + DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K), + DEFINE_RES_IRQ(IRQ_DB8500_KB), + }; + + return platform_device_register_resndata(parent, "nmk-ske-keypad", -1, + resources, 2, pdata, size); } static inline struct amba_device * -db8500_add_ssp(const char *name, resource_size_t base, int irq, - struct pl022_ssp_controller *pdata) +db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, + int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); } -#define db8500_add_i2c0(pdata) \ - dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) -#define db8500_add_i2c1(pdata) \ - dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) -#define db8500_add_i2c2(pdata) \ - dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) -#define db8500_add_i2c3(pdata) \ - dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) -#define db8500_add_i2c4(pdata) \ - dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) - -#define db8500_add_msp0_i2s(pdata) \ - dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_i2s(pdata) \ - dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_i2s(pdata) \ - dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_i2s(pdata) \ - dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - -#define db8500_add_msp0_spi(pdata) \ - dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_spi(pdata) \ - dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_spi(pdata) \ - dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_spi(pdata) \ - dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - -#define db8500_add_rtc() \ - dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC); - -#define db8500_add_usb(rx_cfg, tx_cfg) \ - ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) - -#define db8500_add_sdi0(pdata, pid) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) -#define db8500_add_sdi1(pdata, pid) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) -#define db8500_add_sdi2(pdata, pid) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) -#define db8500_add_sdi3(pdata, pid) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) -#define db8500_add_sdi4(pdata, pid) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) -#define db8500_add_sdi5(pdata, pid) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) - -#define db8500_add_ssp0(pdata) \ - db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) -#define db8500_add_ssp1(pdata) \ - db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) - -#define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) -#define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) -#define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) -#define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) - -#define db8500_add_uart0(pdata) \ - dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) -#define db8500_add_uart1(pdata) \ - dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata) -#define db8500_add_uart2(pdata) \ - dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata) +#define db8500_add_i2c0(parent, pdata) \ + dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) +#define db8500_add_i2c1(parent, pdata) \ + dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) +#define db8500_add_i2c2(parent, pdata) \ + dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) +#define db8500_add_i2c3(parent, pdata) \ + dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) +#define db8500_add_i2c4(parent, pdata) \ + dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) + +#define db8500_add_msp0_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) + +#define db8500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ + IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \ + IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \ + IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \ + IRQ_DB8500_MSP1, pdata) + +#define db8500_add_rtc(parent) \ + dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC); + +#define db8500_add_usb(parent, rx_cfg, tx_cfg) \ + ux500_add_usb(parent, U8500_USBOTG_BASE, \ + IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) + +#define db8500_add_sdi0(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \ + IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \ + IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \ + IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \ + IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \ + IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \ + IRQ_DB8500_SDMMC5, pdata, pid) + +#define db8500_add_ssp0(parent, pdata) \ + db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \ + IRQ_DB8500_SSP0, pdata) +#define db8500_add_ssp1(parent, pdata) \ + db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \ + IRQ_DB8500_SSP1, pdata) + +#define db8500_add_spi0(parent, pdata) \ + dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \ + IRQ_DB8500_SPI0, pdata, 0) +#define db8500_add_spi1(parent, pdata) \ + dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \ + IRQ_DB8500_SPI1, pdata, 0) +#define db8500_add_spi2(parent, pdata) \ + dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \ + IRQ_DB8500_SPI2, pdata, 0) +#define db8500_add_spi3(parent, pdata) \ + dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \ + IRQ_DB8500_SPI3, pdata, 0) + +#define db8500_add_uart0(parent, pdata) \ + dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \ + IRQ_DB8500_UART0, pdata) +#define db8500_add_uart1(parent, pdata) \ + dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \ + IRQ_DB8500_UART1, pdata) +#define db8500_add_uart2(parent, pdata) \ + dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ + IRQ_DB8500_UART2, pdata) #endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c index 1cfab68ae417..41e9470fa0e6 100644 --- a/arch/arm/mach-ux500/dma-db5500.c +++ b/arch/arm/mach-ux500/dma-db5500.c @@ -125,10 +125,11 @@ static struct platform_device dma40_device = { .resource = dma40_resources }; -void __init db5500_dma_init(void) +void __init db5500_dma_init(struct device *parent) { int ret; + dma40_device.dev.parent = parent; ret = platform_device_register(&dma40_device); if (ret) dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 80e10f50282e..9ec20b96d8f2 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -161,4 +161,7 @@ #define U8500_MODEM_BASE 0xe000000 #define U8500_APE_BASE 0x6000000 +/* SoC identification number information */ +#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) + #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index d93d6dbef25b..f84698936d36 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -23,7 +23,7 @@ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) /* typesafe io address */ -#define __io_address(n) __io(IO_ADDRESS(n)) +#define __io_address(n) IOMEM(IO_ADDRESS(n)) /* Used by some plat-nomadik code */ #define io_p2v(n) __io_address(n) diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h deleted file mode 100644 index 1cf3f44ce5b2..000000000000 --- a/arch/arm/mach-ux500/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-u8500/include/mach/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index d2d4131435a6..7d34c52798b5 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -13,7 +13,7 @@ #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ - + AB8500_NR_IRQS) + + AB8500_MAX_NR_IRQS) /* TC35892 */ #define TC35892_NR_INTERNAL_IRQS 8 diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 93d403955eaa..3dc00ffa7bfa 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -18,14 +18,16 @@ void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern void __init u5500_init_devices(void); -extern void __init u8500_init_devices(void); +extern struct device * __init u5500_init_devices(void); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init u5500_sdi_init(void); +extern void __init u5500_sdi_init(struct device *parent); -extern void __init db5500_dma_init(void); +extern void __init db5500_dma_init(struct device *parent); + +extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h index d3739d418813..4c1cc50a595a 100644 --- a/arch/arm/mach-ux500/include/mach/usb.h +++ b/arch/arm/mach-ux500/include/mach/usb.h @@ -20,6 +20,6 @@ struct ux500_musb_board_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); }; -void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, - int *dma_tx_cfg); +void ux500_add_usb(struct device *parent, resource_size_t base, + int irq, int *dma_rx_cfg, int *dma_tx_cfg); #endif diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index e9d580702fbb..d37df98b5c32 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/of.h> #include <asm/smp_twd.h> @@ -30,9 +31,13 @@ static void __init ux500_twd_init(void) twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer : &u8500_twd_local_timer; - err = twd_local_timer_register(twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); + if (of_have_populated_dt()) + twd_local_timer_of_register(); + else { + err = twd_local_timer_register(twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); + } } #else #define ux500_twd_init() do { } while(0) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 9f9e1c203061..a74af389bc63 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -7,6 +7,7 @@ #include <linux/platform_device.h> #include <linux/usb/musb.h> #include <linux/dma-mapping.h> + #include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -140,8 +141,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; } -void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, - int *dma_tx_cfg) +void ux500_add_usb(struct device *parent, resource_size_t base, int irq, + int *dma_rx_cfg, int *dma_tx_cfg) { ux500_musb_device.resource[0].start = base; ux500_musb_device.resource[0].end = base + SZ_64K - 1; @@ -151,5 +152,7 @@ void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); + ux500_musb_device.dev.parent = parent; + platform_device_register(&ux500_musb_device); } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 0968772aedbe..6bbd74e950ab 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -36,7 +36,6 @@ #include <linux/clkdev.h> #include <linux/mtd/physmap.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/leds.h> #include <asm/hardware/arm_timer.h> diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h deleted file mode 100644 index f067c14c7182..000000000000 --- a/arch/arm/mach-versatile/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 51733b022d04..d2268be8c34c 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -24,7 +24,6 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach/pci.h> /* @@ -191,7 +190,7 @@ static struct resource pre_mem = { .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, }; -static int __init pci_versatile_setup_resources(struct list_head *resources) +static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) { int ret = 0; @@ -219,9 +218,9 @@ static int __init pci_versatile_setup_resources(struct list_head *resources) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(resources, &io_mem, sys->io_offset); - pci_add_resource_offset(resources, &non_mem, sys->mem_offset); - pci_add_resource_offset(resources, &pre_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); goto out; @@ -250,7 +249,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; - ret = pci_versatile_setup_resources(&sys->resources); + ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); goto out; diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index 3034a4dab4a1..c504a72b94d6 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -14,7 +14,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <asm/system.h> +#include <asm/cp15.h> extern volatile int pen_release; diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h deleted file mode 100644 index 13522d86685e..000000000000 --- a/arch/arm/mach-vexpress/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h deleted file mode 100644 index 46181eecf273..000000000000 --- a/arch/arm/mach-vt8500/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/io.h - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define __io(a) __typesafe_io((a) + 0xf0000000) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 9a0661992909..9e4dd8b63c4a 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -28,6 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #include <mach/regs-serial.h> diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index db82568a998a..48f5b9fdfb7f 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -27,6 +27,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-w90x900/include/mach/io.h b/arch/arm/mach-w90x900/include/mach/io.h deleted file mode 100644 index d96ab99df05b..000000000000 --- a/arch/arm/mach-w90x900/include/mach/io.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/io.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/io.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * 1:1 mapping for ioremapped regions. - */ - -#define __mem_pci(a) (a) -#define __io(a) __typesafe_io(a) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/io.h b/arch/arm/mach-zynq/include/mach/io.h deleted file mode 100644 index 39d9885e0e9a..000000000000 --- a/arch/arm/mach-zynq/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/io.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_IO_H__ -#define __MACH_IO_H__ - -/* Allow IO space to be anywhere in the memory */ - -#define IO_SPACE_LIMIT 0xffff - -/* IO address mapping macros, nothing special at this time but required */ - -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index caf14dc059e5..9107231aacc5 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,7 +22,8 @@ #include <linux/sched.h> #include <linux/uaccess.h> -#include <asm/system.h> +#include <asm/cp15.h> +#include <asm/system_info.h> #include <asm/unaligned.h> #include "fault.h" diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index e0b0e7a4ec68..dd3d59122cc3 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/highmem.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <plat/cache-feroceon-l2.h> /* diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index b1e192ba8c24..a53fd2aaa2f4 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -30,13 +30,13 @@ static void __iomem *l2x0_base; static DEFINE_RAW_SPINLOCK(l2x0_lock); -static uint32_t l2x0_way_mask; /* Bitmask of active ways */ -static uint32_t l2x0_size; +static u32 l2x0_way_mask; /* Bitmask of active ways */ +static u32 l2x0_size; struct l2x0_regs l2x0_saved_regs; struct l2x0_of_data { - void (*setup)(const struct device_node *, __u32 *, __u32 *); + void (*setup)(const struct device_node *, u32 *, u32 *); void (*save)(void); void (*resume)(void); }; @@ -288,7 +288,7 @@ static void l2x0_disable(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_unlock(__u32 cache_id) +static void l2x0_unlock(u32 cache_id) { int lockregs; int i; @@ -307,11 +307,11 @@ static void l2x0_unlock(__u32 cache_id) } } -void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) { - __u32 aux; - __u32 cache_id; - __u32 way_size = 0; + u32 aux; + u32 cache_id; + u32 way_size = 0; int ways; const char *type; @@ -388,7 +388,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) #ifdef CONFIG_OF static void __init l2x0_of_setup(const struct device_node *np, - __u32 *aux_val, __u32 *aux_mask) + u32 *aux_val, u32 *aux_mask) { u32 data[2] = { 0, 0 }; u32 tag = 0; @@ -422,7 +422,7 @@ static void __init l2x0_of_setup(const struct device_node *np, } static void __init pl310_of_setup(const struct device_node *np, - __u32 *aux_val, __u32 *aux_mask) + u32 *aux_val, u32 *aux_mask) { u32 data[3] = { 0, 0, 0 }; u32 tag[3] = { 0, 0, 0 }; @@ -548,7 +548,7 @@ static const struct of_device_id l2x0_ids[] __initconst = { {} }; -int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { struct device_node *np; struct l2x0_of_data *data; diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 50868651890f..1fbca05fe906 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/hardware/cache-tauros2.h> diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 5a32020471e3..6c3edeb66e74 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -18,7 +18,7 @@ */ #include <linux/init.h> #include <linux/highmem.h> -#include <asm/system.h> +#include <asm/cp15.h> #include <asm/cputype.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index ec8c3befb9c8..1267e64133b9 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -23,10 +23,6 @@ #include "mm.h" -/* - * 0xffff8000 to 0xffffffff is reserved for any ARM architecture - * specific hacks for copying pages efficiently. - */ #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_MT_MINICACHE) @@ -78,10 +74,9 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, raw_spin_lock(&minicache_lock); - set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); - flush_tlb_kernel_page(0xffff8000); + set_top_pte(COPYPAGE_MINICACHE, mk_pte(from, minicache_pgprot)); - mc_copy_user_page((void *)0xffff8000, kto); + mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); raw_spin_unlock(&minicache_lock); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 8b03a5814d00..b9bcc9d79176 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -24,9 +24,6 @@ #error FIX ME #endif -#define from_address (0xffff8000) -#define to_address (0xffffc000) - static DEFINE_RAW_SPINLOCK(v6_lock); /* @@ -90,14 +87,11 @@ static void v6_copy_user_highpage_aliasing(struct page *to, */ raw_spin_lock(&v6_lock); - set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0); - set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0); - - kfrom = from_address + (offset << PAGE_SHIFT); - kto = to_address + (offset << PAGE_SHIFT); + kfrom = COPYPAGE_V6_FROM + (offset << PAGE_SHIFT); + kto = COPYPAGE_V6_TO + (offset << PAGE_SHIFT); - flush_tlb_kernel_page(kfrom); - flush_tlb_kernel_page(kto); + set_top_pte(kfrom, mk_pte(from, PAGE_KERNEL)); + set_top_pte(kto, mk_pte(to, PAGE_KERNEL)); copy_page((void *)kto, (void *)kfrom); @@ -111,8 +105,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, */ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vaddr) { - unsigned int offset = CACHE_COLOUR(vaddr); - unsigned long to = to_address + (offset << PAGE_SHIFT); + unsigned long to = COPYPAGE_V6_TO + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); /* FIXME: not highmem safe */ discard_old_kernel_data(page_address(page)); @@ -123,8 +116,7 @@ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vad */ raw_spin_lock(&v6_lock); - set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0); - flush_tlb_kernel_page(to); + set_top_pte(to, mk_pte(page, PAGE_KERNEL)); clear_page((void *)to); raw_spin_unlock(&v6_lock); diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 439d106ae638..0fb85025344d 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -23,12 +23,6 @@ #include "mm.h" -/* - * 0xffff8000 to 0xffffffff is reserved for any ARM architecture - * specific hacks for copying pages efficiently. - */ -#define COPYPAGE_MINICACHE 0xffff8000 - #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ L_PTE_MT_MINICACHE) @@ -100,8 +94,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, raw_spin_lock(&minicache_lock); - set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); - flush_tlb_kernel_page(COPYPAGE_MINICACHE); + set_top_pte(COPYPAGE_MINICACHE, mk_pte(from, minicache_pgprot)); mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1aa664a1999f..db23ae4aaaab 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -214,7 +214,8 @@ static int __init consistent_init(void) core_initcall(consistent_init); static void * -__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) +__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, + const void *caller) { struct arm_vmregion *c; size_t align; @@ -241,7 +242,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) * Allocate a virtual address in the consistent mapping region. */ c = arm_vmregion_alloc(&consistent_head, align, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller); if (c) { pte_t *pte; int idx = CONSISTENT_PTE_INDEX(c->vm_start); @@ -320,14 +321,14 @@ static void __dma_free_remap(void *cpu_addr, size_t size) #else /* !CONFIG_MMU */ -#define __dma_alloc_remap(page, size, gfp, prot) page_address(page) +#define __dma_alloc_remap(page, size, gfp, prot, c) page_address(page) #define __dma_free_remap(addr, size) do { } while (0) #endif /* CONFIG_MMU */ static void * __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, - pgprot_t prot) + pgprot_t prot, const void *caller) { struct page *page; void *addr; @@ -349,7 +350,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, return NULL; if (!arch_is_coherent()) - addr = __dma_alloc_remap(page, size, gfp, prot); + addr = __dma_alloc_remap(page, size, gfp, prot, caller); else addr = page_address(page); @@ -374,7 +375,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf return memory; return __dma_alloc(dev, size, handle, gfp, - pgprot_dmacoherent(pgprot_kernel)); + pgprot_dmacoherent(pgprot_kernel), + __builtin_return_address(0)); } EXPORT_SYMBOL(dma_alloc_coherent); @@ -386,7 +388,8 @@ void * dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return __dma_alloc(dev, size, handle, gfp, - pgprot_writecombine(pgprot_kernel)); + pgprot_writecombine(pgprot_kernel), + __builtin_return_address(0)); } EXPORT_SYMBOL(dma_alloc_writecombine); @@ -723,6 +726,9 @@ EXPORT_SYMBOL(dma_set_mask); static int __init dma_debug_do_init(void) { +#ifdef CONFIG_MMU + arm_vmregion_create_proc("dma-mappings", &consistent_head); +#endif dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bb7eac381a8e..9055b5a84ec5 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -21,8 +21,9 @@ #include <linux/perf_event.h> #include <asm/exception.h> -#include <asm/system.h> #include <asm/pgtable.h> +#include <asm/system_misc.h> +#include <asm/system_info.h> #include <asm/tlbflush.h> #include "fault.h" @@ -164,7 +165,8 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr, struct siginfo si; #ifdef CONFIG_DEBUG_USER - if (user_debug & UDBG_SEGV) { + if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) || + ((user_debug & UDBG_BUS) && (sig == SIGBUS))) { printk(KERN_DEBUG "%s: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n", tsk->comm, sig, addr, fsr); show_pte(tsk->mm, addr); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 1a8d4aa821be..77458548e031 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -16,22 +16,18 @@ #include <asm/cachetype.h> #include <asm/highmem.h> #include <asm/smp_plat.h> -#include <asm/system.h> #include <asm/tlbflush.h> #include "mm.h" #ifdef CONFIG_CPU_CACHE_VIPT -#define ALIAS_FLUSH_START 0xffff4000 - static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { - unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); + unsigned long to = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); const int zero = 0; - set_pte_ext(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL), 0); - flush_tlb_kernel_page(to); + set_top_pte(to, pfn_pte(pfn, PAGE_KERNEL)); asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4" @@ -42,13 +38,12 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len) { - unsigned long colour = CACHE_COLOUR(vaddr); + unsigned long va = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); unsigned long offset = vaddr & (PAGE_SIZE - 1); unsigned long to; - set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0); - to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset; - flush_tlb_kernel_page(to); + set_top_pte(va, pfn_pte(pfn, PAGE_KERNEL)); + to = va + offset; flush_icache_range(to, to + len); } diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 5a21505d7550..21b9e1bf9b77 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -69,15 +69,14 @@ void *kmap_atomic(struct page *page) * With debugging enabled, kunmap_atomic forces that entry to 0. * Make sure it was indeed properly unmapped. */ - BUG_ON(!pte_none(*(TOP_PTE(vaddr)))); + BUG_ON(!pte_none(get_top_pte(vaddr))); #endif - set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0); /* * When debugging is off, kunmap_atomic leaves the previous mapping - * in place, so this TLB flush ensures the TLB is updated with the - * new mapping. + * in place, so the contained TLB flush ensures the TLB is updated + * with the new mapping. */ - local_flush_tlb_kernel_page(vaddr); + set_top_pte(vaddr, mk_pte(page, kmap_prot)); return (void *)vaddr; } @@ -96,8 +95,7 @@ void __kunmap_atomic(void *kvaddr) __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - set_pte_ext(TOP_PTE(vaddr), __pte(0), 0); - local_flush_tlb_kernel_page(vaddr); + set_top_pte(vaddr, __pte(0)); #else (void) idx; /* to kill a warning */ #endif @@ -121,10 +119,9 @@ void *kmap_atomic_pfn(unsigned long pfn) idx = type + KM_TYPE_NR * smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(*(TOP_PTE(vaddr)))); + BUG_ON(!pte_none(get_top_pte(vaddr))); #endif - set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0); - local_flush_tlb_kernel_page(vaddr); + set_top_pte(vaddr, pfn_pte(pfn, kmap_prot)); return (void *)vaddr; } @@ -132,11 +129,9 @@ void *kmap_atomic_pfn(unsigned long pfn) struct page *kmap_atomic_to_page(const void *ptr) { unsigned long vaddr = (unsigned long)ptr; - pte_t *pte; if (vaddr < FIXADDR_START) return virt_to_page(ptr); - pte = TOP_PTE(vaddr); - return pte_page(*pte); + return pte_page(get_top_pte(vaddr)); } diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index feacf4c76712..ab88ed4f8e08 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -5,6 +5,7 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/sections.h> +#include <asm/system_info.h> pgd_t *idmap_pgd; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 245a55a0a5bb..595079fa9d1d 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -658,7 +658,9 @@ void __init mem_init(void) #ifdef CONFIG_HIGHMEM " pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n" #endif +#ifdef CONFIG_MODULES " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" +#endif " .text : 0x%p" " - 0x%p" " (%4d kB)\n" " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .data : 0x%p" " - 0x%p" " (%4d kB)\n" @@ -677,7 +679,9 @@ void __init mem_init(void) MLM(PKMAP_BASE, (PKMAP_BASE) + (LAST_PKMAP) * (PAGE_SIZE)), #endif +#ifdef CONFIG_MODULES MLM(MODULES_VADDR, MODULES_END), +#endif MLK_ROUNDUP(_text, _etext), MLK_ROUNDUP(__init_begin, __init_end), diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 80632e8d7538..4f55f5062ab7 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,12 +26,14 @@ #include <linux/vmalloc.h> #include <linux/io.h> +#include <asm/cp15.h> #include <asm/cputype.h> #include <asm/cacheflush.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/sizes.h> +#include <asm/system_info.h> #include <asm/mach/map.h> #include "mm.h" @@ -306,11 +308,15 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, } EXPORT_SYMBOL(__arm_ioremap_pfn); +void __iomem * (*arch_ioremap_caller)(unsigned long, size_t, + unsigned int, void *) = + __arm_ioremap_caller; + void __iomem * __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) { - return __arm_ioremap_caller(phys_addr, size, mtype, - __builtin_return_address(0)); + return arch_ioremap_caller(phys_addr, size, mtype, + __builtin_return_address(0)); } EXPORT_SYMBOL(__arm_ioremap); @@ -369,4 +375,11 @@ void __iounmap(volatile void __iomem *io_addr) vunmap(addr); } -EXPORT_SYMBOL(__iounmap); + +void (*arch_iounmap)(volatile void __iomem *) = __iounmap; + +void __arm_iounmap(volatile void __iomem *io_addr) +{ + arch_iounmap(io_addr); +} +EXPORT_SYMBOL(__arm_iounmap); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 70f6d3ea4834..27f4a619b35d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -3,7 +3,31 @@ /* the upper-most page table pointer */ extern pmd_t *top_pmd; -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) +/* + * 0xffff8000 to 0xffffffff is reserved for any ARM architecture + * specific hacks for copying pages efficiently, while 0xffff4000 + * is reserved for VIPT aliasing flushing by generic code. + * + * Note that we don't allow VIPT aliasing caches with SMP. + */ +#define COPYPAGE_MINICACHE 0xffff8000 +#define COPYPAGE_V6_FROM 0xffff8000 +#define COPYPAGE_V6_TO 0xffffc000 +/* PFN alias flushing, for VIPT caches */ +#define FLUSH_ALIAS_START 0xffff4000 + +static inline void set_top_pte(unsigned long va, pte_t pte) +{ + pte_t *ptep = pte_offset_kernel(top_pmd, va); + set_pte_ext(ptep, pte, 0); + local_flush_tlb_kernel_page(va); +} + +static inline pte_t get_top_pte(unsigned long va) +{ + pte_t *ptep = pte_offset_kernel(top_pmd, va); + return *ptep; +} static inline pmd_t *pmd_off_k(unsigned long virt) { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 94c5a0c94f5e..b86f8933ff91 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -17,6 +17,7 @@ #include <linux/fs.h> #include <linux/vmalloc.h> +#include <asm/cp15.h> #include <asm/cputype.h> #include <asm/sections.h> #include <asm/cachetype.h> @@ -25,6 +26,7 @@ #include <asm/smp_plat.h> #include <asm/tlb.h> #include <asm/highmem.h> +#include <asm/system_info.h> #include <asm/traps.h> #include <asm/mach/arch.h> @@ -997,11 +999,14 @@ static void __init devicemaps_init(struct machine_desc *mdesc) { struct map_desc map; unsigned long addr; + void *vectors; /* * Allocate the vector page early. */ - vectors_page = early_alloc(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE); + + early_trap_init(vectors); for (addr = VMALLOC_START; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1041,7 +1046,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) * location (0xffff0000). If we aren't using high-vectors, also * create a mapping at the low-vectors virtual address. */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors_page)); + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; map.type = MT_HIGH_VECTORS; diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 4fc6794cca4b..6486d2f253cd 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -86,13 +86,17 @@ void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size, } EXPORT_SYMBOL(__arm_ioremap); +void __iomem * (*arch_ioremap_caller)(unsigned long, size_t, unsigned int, void *); + void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size, unsigned int mtype, void *caller) { return __arm_ioremap(phys_addr, size, mtype); } -void __iounmap(volatile void __iomem *addr) +void (*arch_iounmap)(volatile void __iomem *); + +void __arm_iounmap(volatile void __iomem *addr) { } -EXPORT_SYMBOL(__iounmap); +EXPORT_SYMBOL(__arm_iounmap); diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index a3e78ccabd65..0acb089d0f70 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -12,6 +12,7 @@ #include <linux/highmem.h> #include <linux/slab.h> +#include <asm/cp15.h> #include <asm/pgalloc.h> #include <asm/page.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 272558a133a3..d217e9795d74 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -22,7 +22,6 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/ptrace.h> -#include <asm/system.h> #include "proc-macros.S" diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c index 036fdbfdd62f..a631016e1f8f 100644 --- a/arch/arm/mm/vmregion.c +++ b/arch/arm/mm/vmregion.c @@ -1,5 +1,8 @@ +#include <linux/fs.h> #include <linux/spinlock.h> #include <linux/list.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include "vmregion.h" @@ -36,7 +39,7 @@ struct arm_vmregion * arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, - size_t size, gfp_t gfp) + size_t size, gfp_t gfp, const void *caller) { unsigned long start = head->vm_start, addr = head->vm_end; unsigned long flags; @@ -52,6 +55,8 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, if (!new) goto out; + new->caller = caller; + spin_lock_irqsave(&head->vm_lock, flags); addr = rounddown(addr - size, align); @@ -129,3 +134,72 @@ void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c) kfree(c); } + +#ifdef CONFIG_PROC_FS +static int arm_vmregion_show(struct seq_file *m, void *p) +{ + struct arm_vmregion *c = list_entry(p, struct arm_vmregion, vm_list); + + seq_printf(m, "0x%08lx-0x%08lx %7lu", c->vm_start, c->vm_end, + c->vm_end - c->vm_start); + if (c->caller) + seq_printf(m, " %pS", (void *)c->caller); + seq_putc(m, '\n'); + return 0; +} + +static void *arm_vmregion_start(struct seq_file *m, loff_t *pos) +{ + struct arm_vmregion_head *h = m->private; + spin_lock_irq(&h->vm_lock); + return seq_list_start(&h->vm_list, *pos); +} + +static void *arm_vmregion_next(struct seq_file *m, void *p, loff_t *pos) +{ + struct arm_vmregion_head *h = m->private; + return seq_list_next(p, &h->vm_list, pos); +} + +static void arm_vmregion_stop(struct seq_file *m, void *p) +{ + struct arm_vmregion_head *h = m->private; + spin_unlock_irq(&h->vm_lock); +} + +static const struct seq_operations arm_vmregion_ops = { + .start = arm_vmregion_start, + .stop = arm_vmregion_stop, + .next = arm_vmregion_next, + .show = arm_vmregion_show, +}; + +static int arm_vmregion_open(struct inode *inode, struct file *file) +{ + struct arm_vmregion_head *h = PDE(inode)->data; + int ret = seq_open(file, &arm_vmregion_ops); + if (!ret) { + struct seq_file *m = file->private_data; + m->private = h; + } + return ret; +} + +static const struct file_operations arm_vmregion_fops = { + .open = arm_vmregion_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h) +{ + proc_create_data(path, S_IRUSR, NULL, &arm_vmregion_fops, h); + return 0; +} +#else +int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h) +{ + return 0; +} +#endif diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index 15e9f044db9f..162be662c088 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -19,11 +19,14 @@ struct arm_vmregion { unsigned long vm_end; struct page *vm_pages; int vm_active; + const void *caller; }; -struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t); +struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t, const void *); struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long); struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long); void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *); +int arm_vmregion_create_proc(const char *, struct arm_vmregion_head *); + #endif diff --git a/arch/arm/net/Makefile b/arch/arm/net/Makefile new file mode 100644 index 000000000000..c2c10841b6be --- /dev/null +++ b/arch/arm/net/Makefile @@ -0,0 +1,3 @@ +# ARM-specific networking code + +obj-$(CONFIG_BPF_JIT) += bpf_jit_32.o diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c new file mode 100644 index 000000000000..62135849f48b --- /dev/null +++ b/arch/arm/net/bpf_jit_32.c @@ -0,0 +1,915 @@ +/* + * Just-In-Time compiler for BPF filters on 32bit ARM + * + * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + */ + +#include <linux/bitops.h> +#include <linux/compiler.h> +#include <linux/errno.h> +#include <linux/filter.h> +#include <linux/moduleloader.h> +#include <linux/netdevice.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <asm/cacheflush.h> +#include <asm/hwcap.h> + +#include "bpf_jit_32.h" + +/* + * ABI: + * + * r0 scratch register + * r4 BPF register A + * r5 BPF register X + * r6 pointer to the skb + * r7 skb->data + * r8 skb_headlen(skb) + */ + +#define r_scratch ARM_R0 +/* r1-r3 are (also) used for the unaligned loads on the non-ARMv7 slowpath */ +#define r_off ARM_R1 +#define r_A ARM_R4 +#define r_X ARM_R5 +#define r_skb ARM_R6 +#define r_skb_data ARM_R7 +#define r_skb_hl ARM_R8 + +#define SCRATCH_SP_OFFSET 0 +#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + (k)) + +#define SEEN_MEM ((1 << BPF_MEMWORDS) - 1) +#define SEEN_MEM_WORD(k) (1 << (k)) +#define SEEN_X (1 << BPF_MEMWORDS) +#define SEEN_CALL (1 << (BPF_MEMWORDS + 1)) +#define SEEN_SKB (1 << (BPF_MEMWORDS + 2)) +#define SEEN_DATA (1 << (BPF_MEMWORDS + 3)) + +#define FLAG_NEED_X_RESET (1 << 0) + +struct jit_ctx { + const struct sk_filter *skf; + unsigned idx; + unsigned prologue_bytes; + int ret0_fp_idx; + u32 seen; + u32 flags; + u32 *offsets; + u32 *target; +#if __LINUX_ARM_ARCH__ < 7 + u16 epilogue_bytes; + u16 imm_count; + u32 *imms; +#endif +}; + +int bpf_jit_enable __read_mostly; + +static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset) +{ + u8 ret; + int err; + + err = skb_copy_bits(skb, offset, &ret, 1); + + return (u64)err << 32 | ret; +} + +static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset) +{ + u16 ret; + int err; + + err = skb_copy_bits(skb, offset, &ret, 2); + + return (u64)err << 32 | ntohs(ret); +} + +static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset) +{ + u32 ret; + int err; + + err = skb_copy_bits(skb, offset, &ret, 4); + + return (u64)err << 32 | ntohl(ret); +} + +/* + * Wrapper that handles both OABI and EABI and assures Thumb2 interworking + * (where the assembly routines like __aeabi_uidiv could cause problems). + */ +static u32 jit_udiv(u32 dividend, u32 divisor) +{ + return dividend / divisor; +} + +static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx) +{ + if (ctx->target != NULL) + ctx->target[ctx->idx] = inst | (cond << 28); + + ctx->idx++; +} + +/* + * Emit an instruction that will be executed unconditionally. + */ +static inline void emit(u32 inst, struct jit_ctx *ctx) +{ + _emit(ARM_COND_AL, inst, ctx); +} + +static u16 saved_regs(struct jit_ctx *ctx) +{ + u16 ret = 0; + + if ((ctx->skf->len > 1) || + (ctx->skf->insns[0].code == BPF_S_RET_A)) + ret |= 1 << r_A; + +#ifdef CONFIG_FRAME_POINTER + ret |= (1 << ARM_FP) | (1 << ARM_IP) | (1 << ARM_LR) | (1 << ARM_PC); +#else + if (ctx->seen & SEEN_CALL) + ret |= 1 << ARM_LR; +#endif + if (ctx->seen & (SEEN_DATA | SEEN_SKB)) + ret |= 1 << r_skb; + if (ctx->seen & SEEN_DATA) + ret |= (1 << r_skb_data) | (1 << r_skb_hl); + if (ctx->seen & SEEN_X) + ret |= 1 << r_X; + + return ret; +} + +static inline int mem_words_used(struct jit_ctx *ctx) +{ + /* yes, we do waste some stack space IF there are "holes" in the set" */ + return fls(ctx->seen & SEEN_MEM); +} + +static inline bool is_load_to_a(u16 inst) +{ + switch (inst) { + case BPF_S_LD_W_LEN: + case BPF_S_LD_W_ABS: + case BPF_S_LD_H_ABS: + case BPF_S_LD_B_ABS: + case BPF_S_ANC_CPU: + case BPF_S_ANC_IFINDEX: + case BPF_S_ANC_MARK: + case BPF_S_ANC_PROTOCOL: + case BPF_S_ANC_RXHASH: + case BPF_S_ANC_QUEUE: + return true; + default: + return false; + } +} + +static void build_prologue(struct jit_ctx *ctx) +{ + u16 reg_set = saved_regs(ctx); + u16 first_inst = ctx->skf->insns[0].code; + u16 off; + +#ifdef CONFIG_FRAME_POINTER + emit(ARM_MOV_R(ARM_IP, ARM_SP), ctx); + emit(ARM_PUSH(reg_set), ctx); + emit(ARM_SUB_I(ARM_FP, ARM_IP, 4), ctx); +#else + if (reg_set) + emit(ARM_PUSH(reg_set), ctx); +#endif + + if (ctx->seen & (SEEN_DATA | SEEN_SKB)) + emit(ARM_MOV_R(r_skb, ARM_R0), ctx); + + if (ctx->seen & SEEN_DATA) { + off = offsetof(struct sk_buff, data); + emit(ARM_LDR_I(r_skb_data, r_skb, off), ctx); + /* headlen = len - data_len */ + off = offsetof(struct sk_buff, len); + emit(ARM_LDR_I(r_skb_hl, r_skb, off), ctx); + off = offsetof(struct sk_buff, data_len); + emit(ARM_LDR_I(r_scratch, r_skb, off), ctx); + emit(ARM_SUB_R(r_skb_hl, r_skb_hl, r_scratch), ctx); + } + + if (ctx->flags & FLAG_NEED_X_RESET) + emit(ARM_MOV_I(r_X, 0), ctx); + + /* do not leak kernel data to userspace */ + if ((first_inst != BPF_S_RET_K) && !(is_load_to_a(first_inst))) + emit(ARM_MOV_I(r_A, 0), ctx); + + /* stack space for the BPF_MEM words */ + if (ctx->seen & SEEN_MEM) + emit(ARM_SUB_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx); +} + +static void build_epilogue(struct jit_ctx *ctx) +{ + u16 reg_set = saved_regs(ctx); + + if (ctx->seen & SEEN_MEM) + emit(ARM_ADD_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx); + + reg_set &= ~(1 << ARM_LR); + +#ifdef CONFIG_FRAME_POINTER + /* the first instruction of the prologue was: mov ip, sp */ + reg_set &= ~(1 << ARM_IP); + reg_set |= (1 << ARM_SP); + emit(ARM_LDM(ARM_SP, reg_set), ctx); +#else + if (reg_set) { + if (ctx->seen & SEEN_CALL) + reg_set |= 1 << ARM_PC; + emit(ARM_POP(reg_set), ctx); + } + + if (!(ctx->seen & SEEN_CALL)) + emit(ARM_BX(ARM_LR), ctx); +#endif +} + +static int16_t imm8m(u32 x) +{ + u32 rot; + + for (rot = 0; rot < 16; rot++) + if ((x & ~ror32(0xff, 2 * rot)) == 0) + return rol32(x, 2 * rot) | (rot << 8); + + return -1; +} + +#if __LINUX_ARM_ARCH__ < 7 + +static u16 imm_offset(u32 k, struct jit_ctx *ctx) +{ + unsigned i = 0, offset; + u16 imm; + + /* on the "fake" run we just count them (duplicates included) */ + if (ctx->target == NULL) { + ctx->imm_count++; + return 0; + } + + while ((i < ctx->imm_count) && ctx->imms[i]) { + if (ctx->imms[i] == k) + break; + i++; + } + + if (ctx->imms[i] == 0) + ctx->imms[i] = k; + + /* constants go just after the epilogue */ + offset = ctx->offsets[ctx->skf->len]; + offset += ctx->prologue_bytes; + offset += ctx->epilogue_bytes; + offset += i * 4; + + ctx->target[offset / 4] = k; + + /* PC in ARM mode == address of the instruction + 8 */ + imm = offset - (8 + ctx->idx * 4); + + return imm; +} + +#endif /* __LINUX_ARM_ARCH__ */ + +/* + * Move an immediate that's not an imm8m to a core register. + */ +static inline void emit_mov_i_no8m(int rd, u32 val, struct jit_ctx *ctx) +{ +#if __LINUX_ARM_ARCH__ < 7 + emit(ARM_LDR_I(rd, ARM_PC, imm_offset(val, ctx)), ctx); +#else + emit(ARM_MOVW(rd, val & 0xffff), ctx); + if (val > 0xffff) + emit(ARM_MOVT(rd, val >> 16), ctx); +#endif +} + +static inline void emit_mov_i(int rd, u32 val, struct jit_ctx *ctx) +{ + int imm12 = imm8m(val); + + if (imm12 >= 0) + emit(ARM_MOV_I(rd, imm12), ctx); + else + emit_mov_i_no8m(rd, val, ctx); +} + +#if __LINUX_ARM_ARCH__ < 6 + +static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx) +{ + _emit(cond, ARM_LDRB_I(ARM_R3, r_addr, 1), ctx); + _emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx); + _emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 3), ctx); + _emit(cond, ARM_LSL_I(ARM_R3, ARM_R3, 16), ctx); + _emit(cond, ARM_LDRB_I(ARM_R0, r_addr, 2), ctx); + _emit(cond, ARM_ORR_S(ARM_R3, ARM_R3, ARM_R1, SRTYPE_LSL, 24), ctx); + _emit(cond, ARM_ORR_R(ARM_R3, ARM_R3, ARM_R2), ctx); + _emit(cond, ARM_ORR_S(r_res, ARM_R3, ARM_R0, SRTYPE_LSL, 8), ctx); +} + +static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx) +{ + _emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx); + _emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 1), ctx); + _emit(cond, ARM_ORR_S(r_res, ARM_R2, ARM_R1, SRTYPE_LSL, 8), ctx); +} + +static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx) +{ + emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx); + emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx); + emit(ARM_LSL_I(r_dst, r_dst, 8), ctx); + emit(ARM_LSL_R(r_dst, r_dst, 8), ctx); +} + +#else /* ARMv6+ */ + +static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx) +{ + _emit(cond, ARM_LDR_I(r_res, r_addr, 0), ctx); +#ifdef __LITTLE_ENDIAN + _emit(cond, ARM_REV(r_res, r_res), ctx); +#endif +} + +static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx) +{ + _emit(cond, ARM_LDRH_I(r_res, r_addr, 0), ctx); +#ifdef __LITTLE_ENDIAN + _emit(cond, ARM_REV16(r_res, r_res), ctx); +#endif +} + +static inline void emit_swap16(u8 r_dst __maybe_unused, + u8 r_src __maybe_unused, + struct jit_ctx *ctx __maybe_unused) +{ +#ifdef __LITTLE_ENDIAN + emit(ARM_REV16(r_dst, r_src), ctx); +#endif +} + +#endif /* __LINUX_ARM_ARCH__ < 6 */ + + +/* Compute the immediate value for a PC-relative branch. */ +static inline u32 b_imm(unsigned tgt, struct jit_ctx *ctx) +{ + u32 imm; + + if (ctx->target == NULL) + return 0; + /* + * BPF allows only forward jumps and the offset of the target is + * still the one computed during the first pass. + */ + imm = ctx->offsets[tgt] + ctx->prologue_bytes - (ctx->idx * 4 + 8); + + return imm >> 2; +} + +#define OP_IMM3(op, r1, r2, imm_val, ctx) \ + do { \ + imm12 = imm8m(imm_val); \ + if (imm12 < 0) { \ + emit_mov_i_no8m(r_scratch, imm_val, ctx); \ + emit(op ## _R((r1), (r2), r_scratch), ctx); \ + } else { \ + emit(op ## _I((r1), (r2), imm12), ctx); \ + } \ + } while (0) + +static inline void emit_err_ret(u8 cond, struct jit_ctx *ctx) +{ + if (ctx->ret0_fp_idx >= 0) { + _emit(cond, ARM_B(b_imm(ctx->ret0_fp_idx, ctx)), ctx); + /* NOP to keep the size constant between passes */ + emit(ARM_MOV_R(ARM_R0, ARM_R0), ctx); + } else { + _emit(cond, ARM_MOV_I(ARM_R0, 0), ctx); + _emit(cond, ARM_B(b_imm(ctx->skf->len, ctx)), ctx); + } +} + +static inline void emit_blx_r(u8 tgt_reg, struct jit_ctx *ctx) +{ +#if __LINUX_ARM_ARCH__ < 5 + emit(ARM_MOV_R(ARM_LR, ARM_PC), ctx); + + if (elf_hwcap & HWCAP_THUMB) + emit(ARM_BX(tgt_reg), ctx); + else + emit(ARM_MOV_R(ARM_PC, tgt_reg), ctx); +#else + emit(ARM_BLX_R(tgt_reg), ctx); +#endif +} + +static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx) +{ +#if __LINUX_ARM_ARCH__ == 7 + if (elf_hwcap & HWCAP_IDIVA) { + emit(ARM_UDIV(rd, rm, rn), ctx); + return; + } +#endif + if (rm != ARM_R0) + emit(ARM_MOV_R(ARM_R0, rm), ctx); + if (rn != ARM_R1) + emit(ARM_MOV_R(ARM_R1, rn), ctx); + + ctx->seen |= SEEN_CALL; + emit_mov_i(ARM_R3, (u32)jit_udiv, ctx); + emit_blx_r(ARM_R3, ctx); + + if (rd != ARM_R0) + emit(ARM_MOV_R(rd, ARM_R0), ctx); +} + +static inline void update_on_xread(struct jit_ctx *ctx) +{ + if (!(ctx->seen & SEEN_X)) + ctx->flags |= FLAG_NEED_X_RESET; + + ctx->seen |= SEEN_X; +} + +static int build_body(struct jit_ctx *ctx) +{ + void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w}; + const struct sk_filter *prog = ctx->skf; + const struct sock_filter *inst; + unsigned i, load_order, off, condt; + int imm12; + u32 k; + + for (i = 0; i < prog->len; i++) { + inst = &(prog->insns[i]); + /* K as an immediate value operand */ + k = inst->k; + + /* compute offsets only in the fake pass */ + if (ctx->target == NULL) + ctx->offsets[i] = ctx->idx * 4; + + switch (inst->code) { + case BPF_S_LD_IMM: + emit_mov_i(r_A, k, ctx); + break; + case BPF_S_LD_W_LEN: + ctx->seen |= SEEN_SKB; + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4); + emit(ARM_LDR_I(r_A, r_skb, + offsetof(struct sk_buff, len)), ctx); + break; + case BPF_S_LD_MEM: + /* A = scratch[k] */ + ctx->seen |= SEEN_MEM_WORD(k); + emit(ARM_LDR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx); + break; + case BPF_S_LD_W_ABS: + load_order = 2; + goto load; + case BPF_S_LD_H_ABS: + load_order = 1; + goto load; + case BPF_S_LD_B_ABS: + load_order = 0; +load: + /* the interpreter will deal with the negative K */ + if ((int)k < 0) + return -ENOTSUPP; + emit_mov_i(r_off, k, ctx); +load_common: + ctx->seen |= SEEN_DATA | SEEN_CALL; + + if (load_order > 0) { + emit(ARM_SUB_I(r_scratch, r_skb_hl, + 1 << load_order), ctx); + emit(ARM_CMP_R(r_scratch, r_off), ctx); + condt = ARM_COND_HS; + } else { + emit(ARM_CMP_R(r_skb_hl, r_off), ctx); + condt = ARM_COND_HI; + } + + _emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data), + ctx); + + if (load_order == 0) + _emit(condt, ARM_LDRB_I(r_A, r_scratch, 0), + ctx); + else if (load_order == 1) + emit_load_be16(condt, r_A, r_scratch, ctx); + else if (load_order == 2) + emit_load_be32(condt, r_A, r_scratch, ctx); + + _emit(condt, ARM_B(b_imm(i + 1, ctx)), ctx); + + /* the slowpath */ + emit_mov_i(ARM_R3, (u32)load_func[load_order], ctx); + emit(ARM_MOV_R(ARM_R0, r_skb), ctx); + /* the offset is already in R1 */ + emit_blx_r(ARM_R3, ctx); + /* check the result of skb_copy_bits */ + emit(ARM_CMP_I(ARM_R1, 0), ctx); + emit_err_ret(ARM_COND_NE, ctx); + emit(ARM_MOV_R(r_A, ARM_R0), ctx); + break; + case BPF_S_LD_W_IND: + load_order = 2; + goto load_ind; + case BPF_S_LD_H_IND: + load_order = 1; + goto load_ind; + case BPF_S_LD_B_IND: + load_order = 0; +load_ind: + OP_IMM3(ARM_ADD, r_off, r_X, k, ctx); + goto load_common; + case BPF_S_LDX_IMM: + ctx->seen |= SEEN_X; + emit_mov_i(r_X, k, ctx); + break; + case BPF_S_LDX_W_LEN: + ctx->seen |= SEEN_X | SEEN_SKB; + emit(ARM_LDR_I(r_X, r_skb, + offsetof(struct sk_buff, len)), ctx); + break; + case BPF_S_LDX_MEM: + ctx->seen |= SEEN_X | SEEN_MEM_WORD(k); + emit(ARM_LDR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx); + break; + case BPF_S_LDX_B_MSH: + /* x = ((*(frame + k)) & 0xf) << 2; */ + ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL; + /* the interpreter should deal with the negative K */ + if (k < 0) + return -1; + /* offset in r1: we might have to take the slow path */ + emit_mov_i(r_off, k, ctx); + emit(ARM_CMP_R(r_skb_hl, r_off), ctx); + + /* load in r0: common with the slowpath */ + _emit(ARM_COND_HI, ARM_LDRB_R(ARM_R0, r_skb_data, + ARM_R1), ctx); + /* + * emit_mov_i() might generate one or two instructions, + * the same holds for emit_blx_r() + */ + _emit(ARM_COND_HI, ARM_B(b_imm(i + 1, ctx) - 2), ctx); + + emit(ARM_MOV_R(ARM_R0, r_skb), ctx); + /* r_off is r1 */ + emit_mov_i(ARM_R3, (u32)jit_get_skb_b, ctx); + emit_blx_r(ARM_R3, ctx); + /* check the return value of skb_copy_bits */ + emit(ARM_CMP_I(ARM_R1, 0), ctx); + emit_err_ret(ARM_COND_NE, ctx); + + emit(ARM_AND_I(r_X, ARM_R0, 0x00f), ctx); + emit(ARM_LSL_I(r_X, r_X, 2), ctx); + break; + case BPF_S_ST: + ctx->seen |= SEEN_MEM_WORD(k); + emit(ARM_STR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx); + break; + case BPF_S_STX: + update_on_xread(ctx); + ctx->seen |= SEEN_MEM_WORD(k); + emit(ARM_STR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx); + break; + case BPF_S_ALU_ADD_K: + /* A += K */ + OP_IMM3(ARM_ADD, r_A, r_A, k, ctx); + break; + case BPF_S_ALU_ADD_X: + update_on_xread(ctx); + emit(ARM_ADD_R(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_SUB_K: + /* A -= K */ + OP_IMM3(ARM_SUB, r_A, r_A, k, ctx); + break; + case BPF_S_ALU_SUB_X: + update_on_xread(ctx); + emit(ARM_SUB_R(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_MUL_K: + /* A *= K */ + emit_mov_i(r_scratch, k, ctx); + emit(ARM_MUL(r_A, r_A, r_scratch), ctx); + break; + case BPF_S_ALU_MUL_X: + update_on_xread(ctx); + emit(ARM_MUL(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_DIV_K: + /* current k == reciprocal_value(userspace k) */ + emit_mov_i(r_scratch, k, ctx); + /* A = top 32 bits of the product */ + emit(ARM_UMULL(r_scratch, r_A, r_A, r_scratch), ctx); + break; + case BPF_S_ALU_DIV_X: + update_on_xread(ctx); + emit(ARM_CMP_I(r_X, 0), ctx); + emit_err_ret(ARM_COND_EQ, ctx); + emit_udiv(r_A, r_A, r_X, ctx); + break; + case BPF_S_ALU_OR_K: + /* A |= K */ + OP_IMM3(ARM_ORR, r_A, r_A, k, ctx); + break; + case BPF_S_ALU_OR_X: + update_on_xread(ctx); + emit(ARM_ORR_R(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_AND_K: + /* A &= K */ + OP_IMM3(ARM_AND, r_A, r_A, k, ctx); + break; + case BPF_S_ALU_AND_X: + update_on_xread(ctx); + emit(ARM_AND_R(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_LSH_K: + if (unlikely(k > 31)) + return -1; + emit(ARM_LSL_I(r_A, r_A, k), ctx); + break; + case BPF_S_ALU_LSH_X: + update_on_xread(ctx); + emit(ARM_LSL_R(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_RSH_K: + if (unlikely(k > 31)) + return -1; + emit(ARM_LSR_I(r_A, r_A, k), ctx); + break; + case BPF_S_ALU_RSH_X: + update_on_xread(ctx); + emit(ARM_LSR_R(r_A, r_A, r_X), ctx); + break; + case BPF_S_ALU_NEG: + /* A = -A */ + emit(ARM_RSB_I(r_A, r_A, 0), ctx); + break; + case BPF_S_JMP_JA: + /* pc += K */ + emit(ARM_B(b_imm(i + k + 1, ctx)), ctx); + break; + case BPF_S_JMP_JEQ_K: + /* pc += (A == K) ? pc->jt : pc->jf */ + condt = ARM_COND_EQ; + goto cmp_imm; + case BPF_S_JMP_JGT_K: + /* pc += (A > K) ? pc->jt : pc->jf */ + condt = ARM_COND_HI; + goto cmp_imm; + case BPF_S_JMP_JGE_K: + /* pc += (A >= K) ? pc->jt : pc->jf */ + condt = ARM_COND_HS; +cmp_imm: + imm12 = imm8m(k); + if (imm12 < 0) { + emit_mov_i_no8m(r_scratch, k, ctx); + emit(ARM_CMP_R(r_A, r_scratch), ctx); + } else { + emit(ARM_CMP_I(r_A, imm12), ctx); + } +cond_jump: + if (inst->jt) + _emit(condt, ARM_B(b_imm(i + inst->jt + 1, + ctx)), ctx); + if (inst->jf) + _emit(condt ^ 1, ARM_B(b_imm(i + inst->jf + 1, + ctx)), ctx); + break; + case BPF_S_JMP_JEQ_X: + /* pc += (A == X) ? pc->jt : pc->jf */ + condt = ARM_COND_EQ; + goto cmp_x; + case BPF_S_JMP_JGT_X: + /* pc += (A > X) ? pc->jt : pc->jf */ + condt = ARM_COND_HI; + goto cmp_x; + case BPF_S_JMP_JGE_X: + /* pc += (A >= X) ? pc->jt : pc->jf */ + condt = ARM_COND_CS; +cmp_x: + update_on_xread(ctx); + emit(ARM_CMP_R(r_A, r_X), ctx); + goto cond_jump; + case BPF_S_JMP_JSET_K: + /* pc += (A & K) ? pc->jt : pc->jf */ + condt = ARM_COND_NE; + /* not set iff all zeroes iff Z==1 iff EQ */ + + imm12 = imm8m(k); + if (imm12 < 0) { + emit_mov_i_no8m(r_scratch, k, ctx); + emit(ARM_TST_R(r_A, r_scratch), ctx); + } else { + emit(ARM_TST_I(r_A, imm12), ctx); + } + goto cond_jump; + case BPF_S_JMP_JSET_X: + /* pc += (A & X) ? pc->jt : pc->jf */ + update_on_xread(ctx); + condt = ARM_COND_NE; + emit(ARM_TST_R(r_A, r_X), ctx); + goto cond_jump; + case BPF_S_RET_A: + emit(ARM_MOV_R(ARM_R0, r_A), ctx); + goto b_epilogue; + case BPF_S_RET_K: + if ((k == 0) && (ctx->ret0_fp_idx < 0)) + ctx->ret0_fp_idx = i; + emit_mov_i(ARM_R0, k, ctx); +b_epilogue: + if (i != ctx->skf->len - 1) + emit(ARM_B(b_imm(prog->len, ctx)), ctx); + break; + case BPF_S_MISC_TAX: + /* X = A */ + ctx->seen |= SEEN_X; + emit(ARM_MOV_R(r_X, r_A), ctx); + break; + case BPF_S_MISC_TXA: + /* A = X */ + update_on_xread(ctx); + emit(ARM_MOV_R(r_A, r_X), ctx); + break; + case BPF_S_ANC_PROTOCOL: + /* A = ntohs(skb->protocol) */ + ctx->seen |= SEEN_SKB; + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, + protocol) != 2); + off = offsetof(struct sk_buff, protocol); + emit(ARM_LDRH_I(r_scratch, r_skb, off), ctx); + emit_swap16(r_A, r_scratch, ctx); + break; + case BPF_S_ANC_CPU: + /* r_scratch = current_thread_info() */ + OP_IMM3(ARM_BIC, r_scratch, ARM_SP, THREAD_SIZE - 1, ctx); + /* A = current_thread_info()->cpu */ + BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4); + off = offsetof(struct thread_info, cpu); + emit(ARM_LDR_I(r_A, r_scratch, off), ctx); + break; + case BPF_S_ANC_IFINDEX: + /* A = skb->dev->ifindex */ + ctx->seen |= SEEN_SKB; + off = offsetof(struct sk_buff, dev); + emit(ARM_LDR_I(r_scratch, r_skb, off), ctx); + + emit(ARM_CMP_I(r_scratch, 0), ctx); + emit_err_ret(ARM_COND_EQ, ctx); + + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, + ifindex) != 4); + off = offsetof(struct net_device, ifindex); + emit(ARM_LDR_I(r_A, r_scratch, off), ctx); + break; + case BPF_S_ANC_MARK: + ctx->seen |= SEEN_SKB; + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4); + off = offsetof(struct sk_buff, mark); + emit(ARM_LDR_I(r_A, r_skb, off), ctx); + break; + case BPF_S_ANC_RXHASH: + ctx->seen |= SEEN_SKB; + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4); + off = offsetof(struct sk_buff, rxhash); + emit(ARM_LDR_I(r_A, r_skb, off), ctx); + break; + case BPF_S_ANC_QUEUE: + ctx->seen |= SEEN_SKB; + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, + queue_mapping) != 2); + BUILD_BUG_ON(offsetof(struct sk_buff, + queue_mapping) > 0xff); + off = offsetof(struct sk_buff, queue_mapping); + emit(ARM_LDRH_I(r_A, r_skb, off), ctx); + break; + default: + return -1; + } + } + + /* compute offsets only during the first pass */ + if (ctx->target == NULL) + ctx->offsets[i] = ctx->idx * 4; + + return 0; +} + + +void bpf_jit_compile(struct sk_filter *fp) +{ + struct jit_ctx ctx; + unsigned tmp_idx; + unsigned alloc_size; + + if (!bpf_jit_enable) + return; + + memset(&ctx, 0, sizeof(ctx)); + ctx.skf = fp; + ctx.ret0_fp_idx = -1; + + ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1)); + if (ctx.offsets == NULL) + return; + + /* fake pass to fill in the ctx->seen */ + if (unlikely(build_body(&ctx))) + goto out; + + tmp_idx = ctx.idx; + build_prologue(&ctx); + ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4; + +#if __LINUX_ARM_ARCH__ < 7 + tmp_idx = ctx.idx; + build_epilogue(&ctx); + ctx.epilogue_bytes = (ctx.idx - tmp_idx) * 4; + + ctx.idx += ctx.imm_count; + if (ctx.imm_count) { + ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count); + if (ctx.imms == NULL) + goto out; + } +#else + /* there's nothing after the epilogue on ARMv7 */ + build_epilogue(&ctx); +#endif + + alloc_size = 4 * ctx.idx; + ctx.target = module_alloc(max(sizeof(struct work_struct), + alloc_size)); + if (unlikely(ctx.target == NULL)) + goto out; + + ctx.idx = 0; + build_prologue(&ctx); + build_body(&ctx); + build_epilogue(&ctx); + + flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx)); + +#if __LINUX_ARM_ARCH__ < 7 + if (ctx.imm_count) + kfree(ctx.imms); +#endif + + if (bpf_jit_enable > 1) + print_hex_dump(KERN_INFO, "BPF JIT code: ", + DUMP_PREFIX_ADDRESS, 16, 4, ctx.target, + alloc_size, false); + + fp->bpf_func = (void *)ctx.target; +out: + kfree(ctx.offsets); + return; +} + +static void bpf_jit_free_worker(struct work_struct *work) +{ + module_free(NULL, work); +} + +void bpf_jit_free(struct sk_filter *fp) +{ + struct work_struct *work; + + if (fp->bpf_func != sk_run_filter) { + work = (struct work_struct *)fp->bpf_func; + + INIT_WORK(work, bpf_jit_free_worker); + schedule_work(work); + } +} diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h new file mode 100644 index 000000000000..99ae5e3f46d2 --- /dev/null +++ b/arch/arm/net/bpf_jit_32.h @@ -0,0 +1,190 @@ +/* + * Just-In-Time compiler for BPF filters on 32bit ARM + * + * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + */ + +#ifndef PFILTER_OPCODES_ARM_H +#define PFILTER_OPCODES_ARM_H + +#define ARM_R0 0 +#define ARM_R1 1 +#define ARM_R2 2 +#define ARM_R3 3 +#define ARM_R4 4 +#define ARM_R5 5 +#define ARM_R6 6 +#define ARM_R7 7 +#define ARM_R8 8 +#define ARM_R9 9 +#define ARM_R10 10 +#define ARM_FP 11 +#define ARM_IP 12 +#define ARM_SP 13 +#define ARM_LR 14 +#define ARM_PC 15 + +#define ARM_COND_EQ 0x0 +#define ARM_COND_NE 0x1 +#define ARM_COND_CS 0x2 +#define ARM_COND_HS ARM_COND_CS +#define ARM_COND_CC 0x3 +#define ARM_COND_LO ARM_COND_CC +#define ARM_COND_MI 0x4 +#define ARM_COND_PL 0x5 +#define ARM_COND_VS 0x6 +#define ARM_COND_VC 0x7 +#define ARM_COND_HI 0x8 +#define ARM_COND_LS 0x9 +#define ARM_COND_GE 0xa +#define ARM_COND_LT 0xb +#define ARM_COND_GT 0xc +#define ARM_COND_LE 0xd +#define ARM_COND_AL 0xe + +/* register shift types */ +#define SRTYPE_LSL 0 +#define SRTYPE_LSR 1 +#define SRTYPE_ASR 2 +#define SRTYPE_ROR 3 + +#define ARM_INST_ADD_R 0x00800000 +#define ARM_INST_ADD_I 0x02800000 + +#define ARM_INST_AND_R 0x00000000 +#define ARM_INST_AND_I 0x02000000 + +#define ARM_INST_BIC_R 0x01c00000 +#define ARM_INST_BIC_I 0x03c00000 + +#define ARM_INST_B 0x0a000000 +#define ARM_INST_BX 0x012FFF10 +#define ARM_INST_BLX_R 0x012fff30 + +#define ARM_INST_CMP_R 0x01500000 +#define ARM_INST_CMP_I 0x03500000 + +#define ARM_INST_LDRB_I 0x05d00000 +#define ARM_INST_LDRB_R 0x07d00000 +#define ARM_INST_LDRH_I 0x01d000b0 +#define ARM_INST_LDR_I 0x05900000 + +#define ARM_INST_LDM 0x08900000 + +#define ARM_INST_LSL_I 0x01a00000 +#define ARM_INST_LSL_R 0x01a00010 + +#define ARM_INST_LSR_I 0x01a00020 +#define ARM_INST_LSR_R 0x01a00030 + +#define ARM_INST_MOV_R 0x01a00000 +#define ARM_INST_MOV_I 0x03a00000 +#define ARM_INST_MOVW 0x03000000 +#define ARM_INST_MOVT 0x03400000 + +#define ARM_INST_MUL 0x00000090 + +#define ARM_INST_POP 0x08bd0000 +#define ARM_INST_PUSH 0x092d0000 + +#define ARM_INST_ORR_R 0x01800000 +#define ARM_INST_ORR_I 0x03800000 + +#define ARM_INST_REV 0x06bf0f30 +#define ARM_INST_REV16 0x06bf0fb0 + +#define ARM_INST_RSB_I 0x02600000 + +#define ARM_INST_SUB_R 0x00400000 +#define ARM_INST_SUB_I 0x02400000 + +#define ARM_INST_STR_I 0x05800000 + +#define ARM_INST_TST_R 0x01100000 +#define ARM_INST_TST_I 0x03100000 + +#define ARM_INST_UDIV 0x0730f010 + +#define ARM_INST_UMULL 0x00800090 + +/* register */ +#define _AL3_R(op, rd, rn, rm) ((op ## _R) | (rd) << 12 | (rn) << 16 | (rm)) +/* immediate */ +#define _AL3_I(op, rd, rn, imm) ((op ## _I) | (rd) << 12 | (rn) << 16 | (imm)) + +#define ARM_ADD_R(rd, rn, rm) _AL3_R(ARM_INST_ADD, rd, rn, rm) +#define ARM_ADD_I(rd, rn, imm) _AL3_I(ARM_INST_ADD, rd, rn, imm) + +#define ARM_AND_R(rd, rn, rm) _AL3_R(ARM_INST_AND, rd, rn, rm) +#define ARM_AND_I(rd, rn, imm) _AL3_I(ARM_INST_AND, rd, rn, imm) + +#define ARM_BIC_R(rd, rn, rm) _AL3_R(ARM_INST_BIC, rd, rn, rm) +#define ARM_BIC_I(rd, rn, imm) _AL3_I(ARM_INST_BIC, rd, rn, imm) + +#define ARM_B(imm24) (ARM_INST_B | ((imm24) & 0xffffff)) +#define ARM_BX(rm) (ARM_INST_BX | (rm)) +#define ARM_BLX_R(rm) (ARM_INST_BLX_R | (rm)) + +#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) +#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) + +#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ + | (off)) +#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ + | (off)) +#define ARM_LDRB_R(rt, rn, rm) (ARM_INST_LDRB_R | (rt) << 12 | (rn) << 16 \ + | (rm)) +#define ARM_LDRH_I(rt, rn, off) (ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \ + | (((off) & 0xf0) << 4) | ((off) & 0xf)) + +#define ARM_LDM(rn, regs) (ARM_INST_LDM | (rn) << 16 | (regs)) + +#define ARM_LSL_R(rd, rn, rm) (_AL3_R(ARM_INST_LSL, rd, 0, rn) | (rm) << 8) +#define ARM_LSL_I(rd, rn, imm) (_AL3_I(ARM_INST_LSL, rd, 0, rn) | (imm) << 7) + +#define ARM_LSR_R(rd, rn, rm) (_AL3_R(ARM_INST_LSR, rd, 0, rn) | (rm) << 8) +#define ARM_LSR_I(rd, rn, imm) (_AL3_I(ARM_INST_LSR, rd, 0, rn) | (imm) << 7) + +#define ARM_MOV_R(rd, rm) _AL3_R(ARM_INST_MOV, rd, 0, rm) +#define ARM_MOV_I(rd, imm) _AL3_I(ARM_INST_MOV, rd, 0, imm) + +#define ARM_MOVW(rd, imm) \ + (ARM_INST_MOVW | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff)) + +#define ARM_MOVT(rd, imm) \ + (ARM_INST_MOVT | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff)) + +#define ARM_MUL(rd, rm, rn) (ARM_INST_MUL | (rd) << 16 | (rm) << 8 | (rn)) + +#define ARM_POP(regs) (ARM_INST_POP | (regs)) +#define ARM_PUSH(regs) (ARM_INST_PUSH | (regs)) + +#define ARM_ORR_R(rd, rn, rm) _AL3_R(ARM_INST_ORR, rd, rn, rm) +#define ARM_ORR_I(rd, rn, imm) _AL3_I(ARM_INST_ORR, rd, rn, imm) +#define ARM_ORR_S(rd, rn, rm, type, rs) \ + (ARM_ORR_R(rd, rn, rm) | (type) << 5 | (rs) << 7) + +#define ARM_REV(rd, rm) (ARM_INST_REV | (rd) << 12 | (rm)) +#define ARM_REV16(rd, rm) (ARM_INST_REV16 | (rd) << 12 | (rm)) + +#define ARM_RSB_I(rd, rn, imm) _AL3_I(ARM_INST_RSB, rd, rn, imm) + +#define ARM_SUB_R(rd, rn, rm) _AL3_R(ARM_INST_SUB, rd, rn, rm) +#define ARM_SUB_I(rd, rn, imm) _AL3_I(ARM_INST_SUB, rd, rn, imm) + +#define ARM_STR_I(rt, rn, off) (ARM_INST_STR_I | (rt) << 12 | (rn) << 16 \ + | (off)) + +#define ARM_TST_R(rn, rm) _AL3_R(ARM_INST_TST, 0, rn, rm) +#define ARM_TST_I(rn, imm) _AL3_I(ARM_INST_TST, 0, rn, imm) + +#define ARM_UDIV(rd, rn, rm) (ARM_INST_UDIV | (rd) << 16 | (rn) | (rm) << 8) + +#define ARM_UMULL(rd_lo, rd_hi, rn, rm) (ARM_INST_UMULL | (rd_hi) << 16 \ + | (rd_lo) << 12 | (rm) << 8 | rn) + +#endif /* PFILTER_OPCODES_ARM_H */ diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index cc60acde84d9..2782ebcc2ed3 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -28,7 +28,6 @@ #include <linux/compiler.h> #include <linux/string.h> -#include <asm/system.h> /* Reset the FPA11 chip. Called to initialize and reset the emulator. */ static void resetFPA11(void) diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c index 4efe392859ee..88215ad031a2 100644 --- a/arch/arm/plat-iop/i2c.c +++ b/arch/arm/plat-iop/i2c.c @@ -23,7 +23,6 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/memory.h> #include <mach/hardware.h> #include <asm/hardware/iop3xx.h> diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 72768356447a..0da42058a20f 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -20,7 +20,6 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/signal.h> -#include <asm/system.h> #include <mach/hardware.h> #include <asm/mach/pci.h> #include <asm/hardware/iop3xx.h> diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c index 6a85a0c502e6..33fa699a4d28 100644 --- a/arch/arm/plat-iop/restart.c +++ b/arch/arm/plat-iop/restart.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <asm/hardware/iop3xx.h> +#include <asm/system_misc.h> #include <mach/hardware.h> void iop3xx_restart(char mode, const char *cmd) diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c index d1e31fa1b0c3..5cac2c540f4f 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -80,7 +80,7 @@ static struct smsc911x_platform_config smsc911x_config = { static struct platform_device smsc_lan9217_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_config, }, diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index a599f01f8b92..0630513554de 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -22,11 +22,8 @@ #include <asm/sizes.h> -#ifdef __ASSEMBLER__ -#define IOMEM(addr) (addr) -#else -#define IOMEM(addr) ((void __force __iomem *)(addr)) -#endif +#define addr_in_module(addr, mod) \ + ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) #define IMX_IO_P2V_MODULE(addr, module) \ (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \ diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h deleted file mode 100644 index 338300b18b00..000000000000 --- a/arch/arm/plat-mxc/include/mach/io.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IO_H__ -#define __ASM_ARCH_MXC_IO_H__ - -/* Allow IO space to be anywhere in the memory */ -#define IO_SPACE_LIMIT 0xffffffff - -#define __arch_ioremap __imx_ioremap -#define __arch_iounmap __iounmap - -#define addr_in_module(addr, mod) \ - ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) - -extern void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int); - -static inline void __iomem * -__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) -{ - if (imx_ioremap != NULL) - return imx_ioremap(phys_addr, size, mtype); - else - return __arm_ioremap(phys_addr, size, mtype); -} - -/* io address mapping macro */ -#define __io(a) __typesafe_io(a) - -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index f30dcacbbd0a..1996c3e3b8fe 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -25,8 +25,8 @@ #include <mach/hardware.h> #include <mach/common.h> +#include <asm/system_misc.h> #include <asm/proc-fns.h> -#include <asm/system.h> #include <asm/mach-types.h> void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index bca4914b4b9d..4c48c8b60b54 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -23,7 +23,6 @@ config HAS_MTU config NOMADIK_MTU_SCHED_CLOCK bool depends on HAS_MTU - select HAVE_SCHED_CLOCK help Use the Multi Timer Unit as the sched_clock. diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index fd0ee84c45d1..9ff93b065686 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -200,8 +200,7 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, sg.dma_address = addr; sg.length = size; - return chan->device->device_prep_slave_sg(chan, &sg, 1, - direction, flags); + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); } #else diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ce1e9b96ba1a..ad95c7a5d009 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP1 select IRQ_DOMAIN select HAVE_IDE select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H if PCCARD help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 56b6f8b7053e..8506cbb7fea4 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -441,6 +441,8 @@ static int __init clk_disable_unused(void) return 0; pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); list_for_each_entry(ck, &clocks, node) { if (ck->ops == &clkops_null) continue; @@ -448,10 +450,9 @@ static int __init clk_disable_unused(void) if (ck->usecount > 0 || !ck->enable_reg) continue; - spin_lock_irqsave(&clockfw_lock, flags); arch_clock->clk_disable_unused(ck); - spin_unlock_irqrestore(&clockfw_lock, flags); } + spin_unlock_irqrestore(&clockfw_lock, flags); return 0; } diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 61a1ec2a6af4..39407cbe34c6 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -15,7 +15,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <plat/fpga.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 74300ae29b71..ecdb3da0dea9 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,7 +36,6 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <asm/system.h> #include <mach/hardware.h> #include <plat/dma.h> diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index cb75b657b04b..2f6e9924a814 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -158,10 +158,6 @@ #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) -#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ - IH_MPUIO_BASE + ((nr) & 0x0f) : \ - IH_GPIO_BASE + (nr)) - struct omap_gpio_dev_attr { int bank_width; /* GPIO bank width */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ @@ -218,30 +214,14 @@ extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); /*-------------------------------------------------------------------------*/ -/* Wrappers for "new style" GPIO calls, using the new infrastructure +/* + * Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. - * * + * * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int irq_to_gpio(unsigned irq) -{ - int tmp; - - /* omap1 SOC mpuio */ - if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) - return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; - - /* SOC gpio */ - tmp = irq - IH_GPIO_BASE; - if (tmp < OMAP_MAX_GPIO_LINES) - return tmp; - - /* we don't supply reverse mappings for non-SOC gpios */ - return -EIO; -} - #endif diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index 537b05ae1f51..e897978371c2 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -43,12 +43,6 @@ #endif #include <plat/serial.h> -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - /* * --------------------------------------------------------------------------- * Common definitions for all OMAP processors diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index f75946c3293d..7a38750c0079 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -137,8 +137,6 @@ struct omap_mmc_platform_data { int (*set_power)(struct device *dev, int slot, int power_on, int vdd); int (*get_ro)(struct device *dev, int slot); - int (*set_sleep)(struct device *dev, int slot, int sleep, - int vdd, int cardsleep); void (*remux)(struct device *dev, int slot, int power_on); /* Call back before enabling / disabling regulators */ void (*before_set_reg)(struct device *dev, int slot, diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 9e8e63d52aab..8070145ccb98 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -47,17 +47,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; * with the original PRCM protocol defined for OMAP2420 */ #define SYSC_TYPE1_MIDLEMODE_SHIFT 12 -#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT) +#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 -#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT) +#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) #define SYSC_TYPE1_SIDLEMODE_SHIFT 3 -#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT) +#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) #define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 -#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) +#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) #define SYSC_TYPE1_SOFTRESET_SHIFT 1 -#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) +#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) #define SYSC_TYPE1_AUTOIDLE_SHIFT 0 -#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT) +#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) /* * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 925b12b500dc..9bb978ecd884 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -16,7 +16,6 @@ * published by the Free Software Foundation. */ -#include <mach/io.h> /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index d0fc9f4dc155..762eeb0626c1 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -112,7 +112,6 @@ extern int omap4430_phy_suspend(struct device *dev, int suspend); */ #define OMAP2_L4_IO_OFFSET 0xb2000000 -#define IOMEM(x) ((void __force __iomem *)(x)) #define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) static inline u8 omap_readb(u32 pa) diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 089899a7db72..74daf5ed1432 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -21,6 +21,7 @@ #include <plat/orion_wdt.h> #include <plat/mv_xor.h> #include <plat/ehci-orion.h> +#include <mach/bridge-regs.h> /* Fill in the resources structure and link it into the platform device structure. There is always a memory region, and nearly @@ -568,13 +569,17 @@ void __init orion_spi_1_init(unsigned long mapbase, ****************************************************************************/ static struct orion_wdt_platform_data orion_wdt_data; +static struct resource orion_wdt_resource = + DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + static struct platform_device orion_wdt_device = { .name = "orion_wdt", .id = -1, .dev = { .platform_data = &orion_wdt_data, }, - .num_resources = 0, + .resource = &orion_wdt_resource, + .num_resources = 1, }; void __init orion_wdt_init(unsigned long tclk) diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h index 885f8abd927b..d6a55bd2e578 100644 --- a/arch/arm/plat-orion/include/plat/audio.h +++ b/arch/arm/plat-orion/include/plat/audio.h @@ -2,7 +2,6 @@ #define __PLAT_AUDIO_H struct kirkwood_asoc_platform_data { - u32 tclk; int burst; }; #endif diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 2d3c19d7c7b1..79ef102e3b2b 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -20,7 +20,6 @@ #include <linux/errno.h> #include <linux/dma-mapping.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/memory.h> #include <mach/hardware.h> diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 32a09931350c..290942d9adda 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -35,6 +35,8 @@ #include <mach/regs-clock.h> #include <asm/irq.h> #include <asm/cacheflush.h> +#include <asm/system_info.h> +#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2bab4c99a234..28f898f75380 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -27,7 +27,6 @@ #include <linux/errno.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> #include <mach/dma.h> diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 7a308699f816..96bea3202304 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -9,8 +9,8 @@ config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) default y - select ARM_VIC if !ARCH_EXYNOS4 - select ARM_GIC if ARCH_EXYNOS4 + select ARM_VIC if !ARCH_EXYNOS + select ARM_GIC if ARCH_EXYNOS select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB @@ -40,6 +40,10 @@ config S5P_HRT help Use the High Resolution timer support +config S5P_DEV_UART + def_bool y + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) + config S5P_PM bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 30d8c3016e6b..4bd824136659 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -12,7 +12,6 @@ obj- := # Core files -obj-y += dev-uart.o obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o @@ -23,5 +22,7 @@ obj-$(CONFIG_S5P_SLEEP) += sleep.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices + +obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 963edea7f7e7..f68a9bb11948 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -61,6 +61,20 @@ struct clk clk_fout_apll = { .id = -1, }; +/* BPLL clock output */ + +struct clk clk_fout_bpll = { + .name = "fout_bpll", + .id = -1, +}; + +/* CPLL clock output */ + +struct clk clk_fout_cpll = { + .name = "fout_cpll", + .id = -1, +}; + /* MPLL clock output * No need .ctrlbit, this is always on */ @@ -101,6 +115,28 @@ struct clksrc_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; +/* Possible clock sources for BPLL Mux */ +static struct clk *clk_src_bpll_list[] = { + [0] = &clk_fin_bpll, + [1] = &clk_fout_bpll, +}; + +struct clksrc_sources clk_src_bpll = { + .sources = clk_src_bpll_list, + .nr_sources = ARRAY_SIZE(clk_src_bpll_list), +}; + +/* Possible clock sources for CPLL Mux */ +static struct clk *clk_src_cpll_list[] = { + [0] = &clk_fin_cpll, + [1] = &clk_fout_cpll, +}; + +struct clksrc_sources clk_src_cpll = { + .sources = clk_src_cpll_list, + .nr_sources = ARRAY_SIZE(clk_src_cpll_list), +}; + /* Possible clock sources for MPLL Mux */ static struct clk *clk_src_mpll_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c index 327acb3a4464..d1bfecae6c9f 100644 --- a/arch/arm/plat-s5p/irq-pm.c +++ b/arch/arm/plat-s5p/irq-pm.c @@ -39,19 +39,32 @@ unsigned long s3c_irqwake_eintallow = 0xffffffffL; int s3c_irq_wake(struct irq_data *data, unsigned int state) { unsigned long irqbit; + unsigned int irq_rtc_tic, irq_rtc_alarm; + +#ifdef CONFIG_ARCH_EXYNOS + if (soc_is_exynos5250()) { + irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC; + irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM; + } else { + irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC; + irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM; + } +#else + irq_rtc_tic = IRQ_RTC_TIC; + irq_rtc_alarm = IRQ_RTC_ALARM; +#endif + + if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) { + irqbit = 1 << (data->irq + 1 - irq_rtc_alarm); - switch (data->irq) { - case IRQ_RTC_TIC: - case IRQ_RTC_ALARM: - irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM); if (!state) s3c_irqwake_intmask |= irqbit; else s3c_irqwake_intmask &= ~irqbit; - break; - default: + } else { return -ENOENT; } + return 0; } diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 81c06d44c11e..46b426e8aff5 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/io.h> -#include <asm/system.h> #include <mach/map.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 301d9c319d0b..eb9f4f534006 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -79,11 +79,11 @@ static int samsung_dmadev_prepare(unsigned ch, info->len, offset_in_page(info->buf)); sg_dma_address(&sg) = info->buf; - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, &sg, 1, info->direction, DMA_PREP_INTERRUPT); break; case DMA_CYCLIC: - desc = chan->device->device_prep_dma_cyclic(chan, + desc = dmaengine_prep_dma_cyclic(chan, info->buf, info->len, info->period, info->direction); break; default: diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 73cb3cfd0685..787ceaca0be8 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -42,6 +42,9 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4412_CPU_ID 0xE4412200 #define EXYNOS4_CPU_MASK 0xFFFE0000 +#define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5_SOC_MASK 0xFFFFF000 + #define IS_SAMSUNG_CPU(name, id, mask) \ static inline int is_samsung_##name(void) \ { \ @@ -58,6 +61,7 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -120,6 +124,12 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) #define EXYNOS4210_REV_1_0 (0x10) #define EXYNOS4210_REV_1_1 (0x11) +#if defined(CONFIG_SOC_EXYNOS5250) +# define soc_is_exynos5250() is_samsung_exynos5250() +#else +# define soc_is_exynos5250() 0 +#endif + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 5e7972de3ed5..2155d4af62a3 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -26,6 +26,8 @@ struct s3c24xx_uart_resources { extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; extern struct s3c24xx_uart_resources s5p_uart_resources[]; +extern struct s3c24xx_uart_resources exynos4_uart_resources[]; +extern struct s3c24xx_uart_resources exynos5_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h index 984bf9e7bc89..1de4b32f98e9 100644 --- a/arch/arm/plat-samsung/include/plat/s5p-clock.h +++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h @@ -18,6 +18,8 @@ #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) #define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_bpll clk_ext_xtal_mux +#define clk_fin_cpll clk_ext_xtal_mux #define clk_fin_mpll clk_ext_xtal_mux #define clk_fin_epll clk_ext_xtal_mux #define clk_fin_dpll clk_ext_xtal_mux @@ -29,6 +31,8 @@ extern struct clk clk_xusbxti; extern struct clk clk_48m; extern struct clk s5p_clk_27m; extern struct clk clk_fout_apll; +extern struct clk clk_fout_bpll; +extern struct clk clk_fout_cpll; extern struct clk clk_fout_mpll; extern struct clk clk_fout_epll; extern struct clk clk_fout_dpll; @@ -37,6 +41,8 @@ extern struct clk clk_arm; extern struct clk clk_vpll; extern struct clksrc_sources clk_src_apll; +extern struct clksrc_sources clk_src_bpll; +extern struct clksrc_sources clk_src_cpll; extern struct clksrc_sources clk_src_mpll; extern struct clksrc_sources clk_src_epll; extern struct clksrc_sources clk_src_dpll; diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index ee48e12a1e72..7e068d182c3d 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -37,7 +37,9 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) +#ifdef S3C_PA_UART #define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) +#endif static __inline__ void uart_wr(unsigned int reg, unsigned int val) diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index 51583cd30164..f980cf3d2baa 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <mach/map.h> +#include <plat/cpu.h> #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> @@ -57,6 +58,21 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) struct irq_chip_type *ct; unsigned int i; +#ifdef CONFIG_ARCH_EXYNOS + if (soc_is_exynos5250()) { + pirq[0] = EXYNOS5_IRQ_TIMER0_VIC; + pirq[1] = EXYNOS5_IRQ_TIMER1_VIC; + pirq[2] = EXYNOS5_IRQ_TIMER2_VIC; + pirq[3] = EXYNOS5_IRQ_TIMER3_VIC; + pirq[4] = EXYNOS5_IRQ_TIMER4_VIC; + } else { + pirq[0] = EXYNOS4_IRQ_TIMER0_VIC; + pirq[1] = EXYNOS4_IRQ_TIMER1_VIC; + pirq[2] = EXYNOS4_IRQ_TIMER2_VIC; + pirq[3] = EXYNOS4_IRQ_TIMER3_VIC; + pirq[4] = EXYNOS4_IRQ_TIMER4_VIC; + } +#endif s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c index e3bb806bbafe..4dcb11c3d894 100644 --- a/arch/arm/plat-samsung/time.c +++ b/arch/arm/plat-samsung/time.c @@ -28,7 +28,6 @@ #include <linux/io.h> #include <linux/platform_device.h> -#include <asm/system.h> #include <asm/leds.h> #include <asm/mach-types.h> diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h index 66d677225d15..70187d763e26 100644 --- a/arch/arm/plat-spear/include/plat/hardware.h +++ b/arch/arm/plat-spear/include/plat/hardware.h @@ -14,10 +14,4 @@ #ifndef __PLAT_HARDWARE_H #define __PLAT_HARDWARE_H -#ifndef __ASSEMBLY__ -#define IOMEM(x) ((void __iomem __force *)(x)) -#else -#define IOMEM(x) (x) -#endif - #endif /* __PLAT_HARDWARE_H */ diff --git a/arch/arm/plat-spear/include/plat/io.h b/arch/arm/plat-spear/include/plat/io.h deleted file mode 100644 index 4d4ba822b3eb..000000000000 --- a/arch/arm/plat-spear/include/plat/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/io.h - * - * IO definitions for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_IO_H -#define __PLAT_IO_H - -#define IO_SPACE_LIMIT 0xFFFFFFFF - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif /* __PLAT_IO_H */ diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h index c16cc31ecbed..0562f134621d 100644 --- a/arch/arm/plat-spear/include/plat/keyboard.h +++ b/arch/arm/plat-spear/include/plat/keyboard.h @@ -159,11 +159,4 @@ struct kbd_platform_data { unsigned int mode; }; -/* This function is used to set platform data field of pdev->dev */ -static inline void -kbd_set_plat_data(struct platform_device *pdev, struct kbd_platform_data *data) -{ - pdev->dev.platform_data = data; -} - #endif /* __PLAT_KEYBOARD_H */ diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 2b4e3d82957c..16f203e78d89 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ #include <linux/io.h> +#include <asm/system_misc.h> #include <asm/hardware/sp810.h> #include <mach/hardware.h> #include <mach/generic.h> diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 52353beb369d..043f7b02a9e7 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -11,7 +11,6 @@ config PLAT_VERSATILE_LEDS depends on ARCH_REALVIEW || ARCH_VERSATILE config PLAT_VERSATILE_SCHED_CLOCK - def_bool y if !ARCH_INTEGRATOR_AP - select HAVE_SCHED_CLOCK + def_bool y endif diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 8f3ccddbdafd..858748eaa144 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -18,7 +18,9 @@ #include <linux/smp.h> #include <linux/init.h> +#include <asm/cp15.h> #include <asm/cputype.h> +#include <asm/system_info.h> #include <asm/thread_notify.h> #include <asm/vfp.h> |