summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig63
-rw-r--r--arch/arm/Kconfig.debug15
-rw-r--r--arch/arm/Makefile4
-rw-r--r--arch/arm/boot/dts/Makefile9
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi9
-rw-r--r--arch/arm/boot/dts/am4372.dtsi3
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi4
-rw-r--r--arch/arm/boot/dts/dra7.dtsi117
-rw-r--r--arch/arm/boot/dts/emev2.dtsi2
-rw-r--r--arch/arm/boot/dts/mt6589-aquaris5.dts (renamed from arch/arm/mach-s5p64x0/include/mach/dma.h)21
-rw-r--r--arch/arm/boot/dts/mt6589.dtsi94
-rw-r--r--arch/arm/boot/dts/omap2420.dtsi2
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3.dtsi2
-rw-r--r--arch/arm/boot/dts/omap4.dtsi9
-rw-r--r--arch/arm/boot/dts/omap5.dtsi2
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7779-marzen-reference.dts121
-rw-r--r--arch/arm/boot/dts/r8a7779-marzen.dts116
-rw-r--r--arch/arm/boot/dts/r8a7779.dtsi220
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts81
-rw-r--r--arch/arm/boot/dts/versatile-pb.dts12
-rw-r--r--arch/arm/common/timer-sp.c4
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig5
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig9
-rw-r--r--arch/arm/configs/multi_v7_defconfig2
-rw-r--r--arch/arm/configs/mxs_defconfig1
-rw-r--r--arch/arm/configs/s5p64x0_defconfig68
-rw-r--r--arch/arm/configs/s5pc100_defconfig49
-rw-r--r--arch/arm/kernel/topology.c2
-rw-r--r--arch/arm/lib/delay.c26
-rw-r--r--arch/arm/mach-berlin/Kconfig3
-rw-r--r--arch/arm/mach-berlin/Makefile3
-rw-r--r--arch/arm/mach-berlin/headsmp.S30
-rw-r--r--arch/arm/mach-berlin/platsmp.c99
-rw-r--r--arch/arm/mach-exynos/exynos.c4
-rw-r--r--arch/arm/mach-exynos/hotplug.c10
-rw-r--r--arch/arm/mach-exynos/mcpm-exynos.c36
-rw-r--r--arch/arm/mach-exynos/platsmp.c34
-rw-r--r--arch/arm/mach-exynos/regs-pmu.h9
-rw-r--r--arch/arm/mach-imx/Kconfig59
-rw-r--r--arch/arm/mach-imx/Makefile11
-rw-r--r--arch/arm/mach-imx/clk-imx1.c151
-rw-r--r--arch/arm/mach-imx/clk-imx21.c299
-rw-r--r--arch/arm/mach-imx/clk-imx25.c47
-rw-r--r--arch/arm/mach-imx/clk-imx27.c452
-rw-r--r--arch/arm/mach-imx/clk-imx31.c6
-rw-r--r--arch/arm/mach-imx/clk-imx35.c6
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c256
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c542
-rw-r--r--arch/arm/mach-imx/clk-imx6sl.c11
-rw-r--r--arch/arm/mach-imx/clk-imx6sx.c25
-rw-r--r--arch/arm/mach-imx/clk-vf610.c8
-rw-r--r--arch/arm/mach-imx/clk.c10
-rw-r--r--arch/arm/mach-imx/clk.h9
-rw-r--r--arch/arm/mach-imx/common.h32
-rw-r--r--arch/arm/mach-imx/cpu-imx5.c25
-rw-r--r--arch/arm/mach-imx/cpu.c13
-rw-r--r--arch/arm/mach-imx/cpuidle-imx6q.c6
-rw-r--r--arch/arm/mach-imx/crm-regs-imx5.h600
-rw-r--r--arch/arm/mach-imx/devices-imx51.h66
-rw-r--r--arch/arm/mach-imx/devices/Kconfig9
-rw-r--r--arch/arm/mach-imx/devices/Makefile2
-rw-r--r--arch/arm/mach-imx/devices/devices-common.h26
-rw-r--r--arch/arm/mach-imx/devices/platform-fec.c12
-rw-r--r--arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c5
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-i2c.c26
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-keypad.c10
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-ssi.c20
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-uart.c22
-rw-r--r--arch/arm/mach-imx/devices/platform-imx2-wdt.c18
-rw-r--r--arch/arm/mach-imx/devices/platform-imx_udc.c75
-rw-r--r--arch/arm/mach-imx/devices/platform-mx1-camera.c42
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc-ehci.c9
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc_nand.c5
-rw-r--r--arch/arm/mach-imx/devices/platform-mxc_rnga.c5
-rw-r--r--arch/arm/mach-imx/devices/platform-pata_imx.c10
-rw-r--r--arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c24
-rw-r--r--arch/arm/mach-imx/devices/platform-spi_imx.c27
-rw-r--r--arch/arm/mach-imx/ehci-imx25.c1
-rw-r--r--arch/arm/mach-imx/ehci-imx27.c1
-rw-r--r--arch/arm/mach-imx/ehci-imx31.c1
-rw-r--r--arch/arm/mach-imx/ehci-imx35.c1
-rw-r--r--arch/arm/mach-imx/ehci-imx5.c171
-rw-r--r--arch/arm/mach-imx/ehci.h43
-rw-r--r--arch/arm/mach-imx/gpc.c5
-rw-r--r--arch/arm/mach-imx/hardware.h2
-rw-r--r--arch/arm/mach-imx/imx25-dt.c6
-rw-r--r--arch/arm/mach-imx/imx27-dt.c6
-rw-r--r--arch/arm/mach-imx/imx31-dt.c2
-rw-r--r--arch/arm/mach-imx/imx35-dt.c2
-rw-r--r--arch/arm/mach-imx/iomux-mx51.h827
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx27.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c1
-rw-r--r--arch/arm/mach-imx/mach-eukrea_cpuimx25.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27ipcam.c77
-rw-r--r--arch/arm/mach-imx/mach-imx27lite.c83
-rw-r--r--arch/arm/mach-imx/mach-imx50.c5
-rw-r--r--arch/arm/mach-imx/mach-imx51.c (renamed from arch/arm/mach-imx/imx51-dt.c)45
-rw-r--r--arch/arm/mach-imx/mach-imx53.c19
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c4
-rw-r--r--arch/arm/mach-imx/mach-imx6sl.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6sx.c10
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c5
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-pca100.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c1
-rw-r--r--arch/arm/mach-imx/mach-vf610.c2
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c1
-rw-r--r--arch/arm/mach-imx/mm-imx5.c155
-rw-r--r--arch/arm/mach-imx/mx1-camera-fiq-ksym.c18
-rw-r--r--arch/arm/mach-imx/mx1-camera-fiq.S35
-rw-r--r--arch/arm/mach-imx/mx31moboard-devboard.c5
-rw-r--r--arch/arm/mach-imx/mx31moboard-marxbot.c5
-rw-r--r--arch/arm/mach-imx/mx31moboard-smartbot.c5
-rw-r--r--arch/arm/mach-imx/mx51.h346
-rw-r--r--arch/arm/mach-imx/mx53.h342
-rw-r--r--arch/arm/mach-imx/mxc.h7
-rw-r--r--arch/arm/mach-imx/pm-imx5.c98
-rw-r--r--arch/arm/mach-imx/pm-imx6.c67
-rw-r--r--arch/arm/mach-imx/system.c24
-rw-r--r--arch/arm/mach-imx/time.c55
-rw-r--r--arch/arm/mach-imx/tzic.c9
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c10
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c10
-rw-r--r--arch/arm/mach-kirkwood/Kconfig111
-rw-r--r--arch/arm/mach-kirkwood/Makefile14
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot3
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c223
-rw-r--r--arch/arm/mach-kirkwood/common.c746
-rw-r--r--arch/arm/mach-kirkwood/common.h74
-rw-r--r--arch/arm/mach-kirkwood/d2net_v2-setup.c231
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h86
-rw-r--r--arch/arm/mach-kirkwood/include/mach/entry-macro.S34
-rw-r--r--arch/arm/mach-kirkwood/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-kirkwood/include/mach/irqs.h65
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h142
-rw-r--r--arch/arm/mach-kirkwood/include/mach/uncompress.h46
-rw-r--r--arch/arm/mach-kirkwood/irq.c82
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.c114
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.h16
-rw-r--r--arch/arm/mach-kirkwood/mpp.c43
-rw-r--r--arch/arm/mach-kirkwood/mpp.h348
-rw-r--r--arch/arm/mach-kirkwood/netxbig_v2-setup.c422
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c255
-rw-r--r--arch/arm/mach-kirkwood/pcie.c296
-rw-r--r--arch/arm/mach-kirkwood/pm.c76
-rw-r--r--arch/arm/mach-kirkwood/pm.h26
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c89
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c128
-rw-r--r--arch/arm/mach-kirkwood/t5325-setup.c216
-rw-r--r--arch/arm/mach-kirkwood/ts219-setup.c142
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c186
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.c113
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.h7
-rw-r--r--arch/arm/mach-mediatek/Kconfig6
-rw-r--r--arch/arm/mach-mediatek/Makefile1
-rw-r--r--arch/arm/mach-mediatek/mediatek.c (renamed from arch/arm/mach-s5pc100/include/mach/dma.h)25
-rw-r--r--arch/arm/mach-mvebu/Kconfig7
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h3
-rw-r--r--arch/arm/mach-mvebu/board-v7.c13
-rw-r--r--arch/arm/mach-mvebu/board.h5
-rw-r--r--arch/arm/mach-mvebu/coherency.c6
-rw-r--r--arch/arm/mach-mvebu/common.h3
-rw-r--r--arch/arm/mach-mvebu/cpu-reset.c2
-rw-r--r--arch/arm/mach-mvebu/headsmp-a9.S9
-rw-r--r--arch/arm/mach-mvebu/hotplug.c31
-rw-r--r--arch/arm/mach-mvebu/kirkwood.c3
-rw-r--r--arch/arm/mach-mvebu/mvebu-soc-id.c21
-rw-r--r--arch/arm/mach-mvebu/netxbig.c191
-rw-r--r--arch/arm/mach-mvebu/platsmp-a9.c5
-rw-r--r--arch/arm/mach-mvebu/platsmp.c48
-rw-r--r--arch/arm/mach-mvebu/pmsu.c27
-rw-r--r--arch/arm/mach-mvebu/system-controller.c19
-rw-r--r--arch/arm/mach-omap2/Makefile1
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c98
-rw-r--r--arch/arm/mach-omap2/clkt_iclk.c8
-rw-r--r--arch/arm/mach-omap2/clock.c76
-rw-r--r--arch/arm/mach-omap2/clock.h44
-rw-r--r--arch/arm/mach-omap2/cm2_7xx.h4
-rw-r--r--arch/arm/mach-omap2/control.c60
-rw-r--r--arch/arm/mach-omap2/control.h40
-rw-r--r--arch/arm/mach-omap2/ctrl_module_core_44xx.h392
-rw-r--r--arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h1409
-rw-r--r--arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h236
-rw-r--r--arch/arm/mach-omap2/devices.c2
-rw-r--r--arch/arm/mach-omap2/dma.c3
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c7
-rw-r--r--arch/arm/mach-omap2/dpll44xx.c19
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c14
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c13
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c9
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c40
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c10
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_43xx_data.c100
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c10
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c574
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_data.h1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c55
-rw-r--r--arch/arm/mach-omap2/pm24xx.c31
-rw-r--r--arch/arm/mach-omap2/pm34xx.c218
-rw-r--r--arch/arm/mach-omap2/prcm43xx.h1
-rw-r--r--arch/arm/mach-omap2/prm2xxx.c18
-rw-r--r--arch/arm/mach-omap2/prm2xxx.h1
-rw-r--r--arch/arm/mach-omap2/prm3xxx.c233
-rw-r--r--arch/arm/mach-omap2/prm3xxx.h6
-rw-r--r--arch/arm/mach-omap2/prm7xx.h4
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig102
-rw-r--r--arch/arm/mach-s5p64x0/Makefile36
-rw-r--r--arch/arm/mach-s5p64x0/Makefile.boot2
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6440.c632
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6450.c701
-rw-r--r--arch/arm/mach-s5p64x0/clock.c236
-rw-r--r--arch/arm/mach-s5p64x0/clock.h38
-rw-r--r--arch/arm/mach-s5p64x0/common.c490
-rw-r--r--arch/arm/mach-s5p64x0/common.h56
-rw-r--r--arch/arm/mach-s5p64x0/dev-audio.c176
-rw-r--r--arch/arm/mach-s5p64x0/dma.c128
-rw-r--r--arch/arm/mach-s5p64x0/i2c.h16
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/debug-macro.S32
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/gpio.h132
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/irqs.h148
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/map.h96
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/pm-core.h119
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-clock.h98
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-gpio.h68
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-irq.h18
-rw-r--r--arch/arm/mach-s5p64x0/irq-pm.c98
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6440.c280
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6450.c299
-rw-r--r--arch/arm/mach-s5p64x0/pm.c202
-rw-r--r--arch/arm/mach-s5p64x0/setup-fb-24bpp.c29
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c0.c38
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c1.c38
-rw-r--r--arch/arm/mach-s5p64x0/setup-sdhci-gpio.c104
-rw-r--r--arch/arm/mach-s5p64x0/setup-spi.c38
-rw-r--r--arch/arm/mach-s5pc100/Kconfig81
-rw-r--r--arch/arm/mach-s5pc100/Makefile32
-rw-r--r--arch/arm/mach-s5pc100/Makefile.boot2
-rw-r--r--arch/arm/mach-s5pc100/clock.c1361
-rw-r--r--arch/arm/mach-s5pc100/common.c255
-rw-r--r--arch/arm/mach-s5pc100/common.h30
-rw-r--r--arch/arm/mach-s5pc100/dev-audio.c239
-rw-r--r--arch/arm/mach-s5pc100/dma.c130
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S39
-rw-r--r--arch/arm/mach-s5pc100/include/mach/entry-macro.S19
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h144
-rw-r--r--arch/arm/mach-s5pc100/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h115
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h137
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-clock.h80
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-gpio.h38
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-irq.h18
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c264
-rw-r--r--arch/arm/mach-s5pc100/setup-fb-24bpp.c35
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c0.c28
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c1.c28
-rw-r--r--arch/arm/mach-s5pc100/setup-ide.c57
-rw-r--r--arch/arm/mach-s5pc100/setup-keypad.c23
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci-gpio.c70
-rw-r--r--arch/arm/mach-s5pc100/setup-spi.c41
-rw-r--r--arch/arm/mach-shmobile/Kconfig24
-rw-r--r--arch/arm/mach-shmobile/Makefile23
-rw-r--r--arch/arm/mach-shmobile/Makefile.boot1
-rw-r--r--arch/arm/mach-shmobile/board-ape6evm-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-ape6evm.c8
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c8
-rw-r--r--arch/arm/mach-shmobile/board-bockw-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-bockw.c8
-rw-r--r--arch/arm/mach-shmobile/board-genmai-reference.c10
-rw-r--r--arch/arm/mach-shmobile/board-genmai.c10
-rw-r--r--arch/arm/mach-shmobile/board-koelsch-reference.c12
-rw-r--r--arch/arm/mach-shmobile/board-koelsch.c10
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c8
-rw-r--r--arch/arm/mach-shmobile/board-lager-reference.c14
-rw-r--r--arch/arm/mach-shmobile/board-lager.c21
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c12
-rw-r--r--arch/arm/mach-shmobile/board-marzen-reference.c32
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c8
-rw-r--r--arch/arm/mach-shmobile/clock-r7s72100.c5
-rw-r--r--arch/arm/mach-shmobile/clock-r8a73a4.c10
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7740.c25
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7778.c10
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7779.c27
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7790.c8
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7791.c6
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c4
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c13
-rw-r--r--arch/arm/mach-shmobile/clock.c6
-rw-r--r--arch/arm/mach-shmobile/clock.h (renamed from arch/arm/mach-shmobile/include/mach/clock.h)0
-rw-r--r--arch/arm/mach-shmobile/common.h (renamed from arch/arm/mach-shmobile/include/mach/common.h)9
-rw-r--r--arch/arm/mach-shmobile/console.c2
-rw-r--r--arch/arm/mach-shmobile/cpufreq.c17
-rw-r--r--arch/arm/mach-shmobile/dma-register.h (renamed from arch/arm/mach-shmobile/include/mach/dma-register.h)0
-rw-r--r--arch/arm/mach-shmobile/headsmp.S13
-rw-r--r--arch/arm/mach-shmobile/include/mach/irqs.h16
-rw-r--r--arch/arm/mach-shmobile/intc-sh7372.c5
-rw-r--r--arch/arm/mach-shmobile/intc-sh73a0.c9
-rw-r--r--arch/arm/mach-shmobile/intc.h (renamed from arch/arm/mach-shmobile/include/mach/intc.h)0
-rw-r--r--arch/arm/mach-shmobile/irqs.h21
-rw-r--r--arch/arm/mach-shmobile/platsmp-apmu.c71
-rw-r--r--arch/arm/mach-shmobile/platsmp-scu.c2
-rw-r--r--arch/arm/mach-shmobile/platsmp.c2
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7740.c4
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7779.c19
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7790.c45
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7791.c73
-rw-r--r--arch/arm/mach-shmobile/pm-rcar.c2
-rw-r--r--arch/arm/mach-shmobile/pm-rcar.h (renamed from arch/arm/mach-shmobile/include/mach/pm-rcar.h)0
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c2
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.h (renamed from arch/arm/mach-shmobile/include/mach/pm-rmobile.h)0
-rw-r--r--arch/arm/mach-shmobile/pm-sh7372.c8
-rw-r--r--arch/arm/mach-shmobile/pm-sh73a0.c2
-rw-r--r--arch/arm/mach-shmobile/r7s72100.h (renamed from arch/arm/mach-shmobile/include/mach/r7s72100.h)1
-rw-r--r--arch/arm/mach-shmobile/r8a73a4.h (renamed from arch/arm/mach-shmobile/include/mach/r8a73a4.h)0
-rw-r--r--arch/arm/mach-shmobile/r8a7740.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7740.h)2
-rw-r--r--arch/arm/mach-shmobile/r8a7778.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7778.h)0
-rw-r--r--arch/arm/mach-shmobile/r8a7779.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7779.h)14
-rw-r--r--arch/arm/mach-shmobile/r8a7790.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7790.h)3
-rw-r--r--arch/arm/mach-shmobile/r8a7791.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7791.h)1
-rw-r--r--arch/arm/mach-shmobile/rcar-gen2.h (renamed from arch/arm/mach-shmobile/include/mach/rcar-gen2.h)1
-rw-r--r--arch/arm/mach-shmobile/setup-emev2.c19
-rw-r--r--arch/arm/mach-shmobile/setup-r7s72100.c15
-rw-r--r--arch/arm/mach-shmobile/setup-r8a73a4.c10
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7740.c12
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7778.c8
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7779.c53
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7790.c22
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7791.c12
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c76
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c12
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c11
-rw-r--r--arch/arm/mach-shmobile/sh7372.h (renamed from arch/arm/mach-shmobile/include/mach/sh7372.h)4
-rw-r--r--arch/arm/mach-shmobile/sh73a0.h (renamed from arch/arm/mach-shmobile/include/mach/sh73a0.h)0
-rw-r--r--arch/arm/mach-shmobile/smp-emev2.c2
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7779.c8
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7790.c36
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7791.c30
-rw-r--r--arch/arm/mach-shmobile/smp-sh73a0.c6
-rw-r--r--arch/arm/mach-shmobile/timer.c50
-rw-r--r--arch/arm/mach-sunxi/Kconfig8
-rw-r--r--arch/arm/mach-sunxi/sunxi.c9
-rw-r--r--arch/arm/mach-versatile/versatile_dt.c1
-rw-r--r--arch/arm/mm/Kconfig2
-rw-r--r--arch/arm/plat-omap/dma.c5
-rw-r--r--arch/arm/plat-samsung/Kconfig14
-rw-r--r--arch/arm/plat-samsung/adc.c2
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h29
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h17
-rw-r--r--arch/arm/plat-samsung/include/plat/fb.h14
-rw-r--r--arch/arm/plat-samsung/include/plat/s5p-clock.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h77
367 files changed, 4537 insertions, 19795 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 245058b3b0ef..03a302267ea4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,6 +6,7 @@ config ARM
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
@@ -528,21 +529,6 @@ config ARCH_DOVE
help
Support for the Marvell Dove SoC 88AP510
-config ARCH_KIRKWOOD
- bool "Marvell Kirkwood"
- select ARCH_REQUIRE_GPIOLIB
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select MVEBU_MBUS
- select PCI
- select PCI_QUIRKS
- select PINCTRL
- select PINCTRL_KIRKWOOD
- select PLAT_ORION_LEGACY
- help
- Support for the following Marvell Kirkwood series SoCs:
- 88F6180, 88F6192 and 88F6281.
-
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select ARCH_REQUIRE_GPIOLIB
@@ -758,42 +744,6 @@ config ARCH_S3C64XX
help
Samsung S3C64XX series based systems
-config ARCH_S5P64X0
- bool "Samsung S5P6440 S5P6450"
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select CPU_V6
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_GPIO_H
- select SAMSUNG_ATAGS
- select SAMSUNG_WDT_RESET
- help
- Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
- SMDK6450.
-
-config ARCH_S5PC100
- bool "Samsung S5PC100"
- select ARCH_REQUIRE_GPIOLIB
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_GPIO_H
- select SAMSUNG_ATAGS
- select SAMSUNG_WDT_RESET
- help
- Samsung S5PC100 series based systems
-
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -951,8 +901,6 @@ source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
-source "arch/arm/mach-kirkwood/Kconfig"
-
source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-msm/Kconfig"
@@ -963,6 +911,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-mediatek/Kconfig"
+
source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
@@ -1004,10 +954,6 @@ source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
-source "arch/arm/mach-s5p64x0/Kconfig"
-
-source "arch/arm/mach-s5pc100/Kconfig"
-
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
@@ -1569,7 +1515,7 @@ source kernel/Kconfig.preempt
config HZ_FIXED
int
- default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
+ default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
@@ -2194,7 +2140,6 @@ menu "Power management options"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
def_bool y
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b7acfa396679..9cce733ba241 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -703,6 +703,14 @@ choice
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
+ config DEBUG_SUNXI_R_UART
+ bool "Kernel low-level debugging messages via sunXi R_UART"
+ depends on MACH_SUN6I || MACH_SUN8I
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A31/A23 based platforms on the R_UART.
+
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
@@ -1021,7 +1029,7 @@ config DEBUG_UART_8250
def_bool ARCH_DOVE || ARCH_EBSA110 || \
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
+ ARCH_IOP33X || ARCH_IXP4XX || \
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
config DEBUG_UART_PHYS
@@ -1031,6 +1039,7 @@ config DEBUG_UART_PHYS
default 0x01c28400 if DEBUG_SUNXI_UART1
default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
+ default 0x01f02800 if DEBUG_SUNXI_R_UART
default 0x02530c00 if DEBUG_KEYSTONE_UART0
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
@@ -1077,7 +1086,7 @@ config DEBUG_UART_PHYS
default 0xe0000000 if ARCH_SPEAR13XX
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
- default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
+ default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HI3716_UART
@@ -1106,6 +1115,7 @@ config DEBUG_UART_VIRT
default 0xf1600000 if ARCH_INTEGRATOR
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
+ default 0xf1f02800 if DEBUG_SUNXI_R_UART
default 0xf2100000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
@@ -1142,7 +1152,6 @@ config DEBUG_UART_VIRT
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
- default 0xfed12000 if ARCH_KIRKWOOD
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6721fab13734..c3a032405e3a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -163,7 +163,6 @@ machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
-machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
@@ -172,6 +171,7 @@ machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
+machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
@@ -187,8 +187,6 @@ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
-machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index adb5ed9e269e..67c59dc2d23a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,8 +90,7 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
k2l-evm.dtb \
k2e-evm.dtb
-kirkwood := \
- kirkwood-b3.dtb \
+dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-cloudbox.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
@@ -150,8 +149,6 @@ kirkwood := \
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
-dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
@@ -327,7 +324,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
r8a7778-bockw-reference.dtb \
r8a7740-armadillo800eva-reference.dtb \
r8a7779-marzen.dtb \
- r8a7779-marzen-reference.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
sh73a0-kzm9g.dtb \
@@ -339,7 +335,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7790-lager.dtb
+ r8a7790-lager.dtb \
+ r8a7779-marzen.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 4a4e02d0ce9e..3a0a161342ba 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -347,6 +347,15 @@
status = "disabled";
};
+ mailbox: mailbox@480C8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480C8000 0x200>;
+ interrupts = <77>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <8>;
+ };
+
timer1: timer@44e31000 {
compatible = "ti,am335x-timer-1ms";
reg = <0x44e31000 0x400>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 49fa59622254..c9aee0e799bb 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -168,9 +168,6 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
- ti,mbox-names = "wkup_m3";
- ti,mbox-data = <0 0 0 0>;
- status = "disabled";
};
timer1: timer@44e31000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 287795985e32..b84bac5bada4 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -925,7 +925,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 2ebc42140ea6..2c0d6ea3ab41 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1124,6 +1124,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+ clocks = <&pwm_clk>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -1155,8 +1156,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
- <&uhpck>;
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 80127638b379..0686b1e9e7f9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -338,6 +338,123 @@
status = "disabled";
};
+ mailbox1: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ ti,hwmods = "mailbox1";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ status = "disabled";
+ };
+
+ mailbox2: mailbox@4883a000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4883a000 0x200>;
+ ti,hwmods = "mailbox2";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox3: mailbox@4883c000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4883c000 0x200>;
+ ti,hwmods = "mailbox3";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox4: mailbox@4883e000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4883e000 0x200>;
+ ti,hwmods = "mailbox4";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox5: mailbox@48840000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48840000 0x200>;
+ ti,hwmods = "mailbox5";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox6: mailbox@48842000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48842000 0x200>;
+ ti,hwmods = "mailbox6";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox7: mailbox@48844000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48844000 0x200>;
+ ti,hwmods = "mailbox7";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox8: mailbox@48846000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48846000 0x200>;
+ ti,hwmods = "mailbox8";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox9: mailbox@4885e000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4885e000 0x200>;
+ ti,hwmods = "mailbox9";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox10: mailbox@48860000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48860000 0x200>;
+ ti,hwmods = "mailbox10";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox11: mailbox@48862000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48862000 0x200>;
+ ti,hwmods = "mailbox11";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox12: mailbox@48864000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48864000 0x200>;
+ ti,hwmods = "mailbox12";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox13: mailbox@48802000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48802000 0x200>;
+ ti,hwmods = "mailbox13";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index e37985fa10e2..00eeed3721b6 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -31,11 +31,13 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <533000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <533000000>;
};
};
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/boot/dts/mt6589-aquaris5.dts
index 5a622af461d7..443b4467de15 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -1,6 +1,6 @@
/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,16 +11,15 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
+/dts-v1/;
+#include "mt6589.dtsi"
-/* This platform uses the common common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
+/ {
+ model = "bq Aquaris5";
-#endif /* __MACH_DMA_H */
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
new file mode 100644
index 000000000000..d0297a051549
--- /dev/null
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "mediatek,mt6589";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ gic: interrupt-controller@10212000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x10211000 0x1000>,
+ <0x10212000 0x1000>,
+ <0x10214000 0x2000>,
+ <0x10216000 0x2000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index e83b0468080c..6d21994d824b 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -157,6 +157,8 @@
interrupts = <26>, <34>;
interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
};
timer1: timer@48028000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c4e8013801ee..aa6a354e236f 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -247,6 +247,8 @@
reg = <0x48094000 0x200>;
interrupts = <26>;
ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
};
timer1: timer@49018000 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index b2891a9a6975..575a49bf968d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -332,6 +332,8 @@
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
+ ti,mbox-num-users = <2>;
+ ti,mbox-num-fifos = <2>;
};
mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 7e26d222bfe3..69408b53200d 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -649,6 +649,15 @@
};
};
+ mailbox: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ };
+
timer1: timer@4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a4ed54988866..cbf6a173088a 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -640,6 +640,8 @@
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
};
timer1: timer@4ae18000 {
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index f50fbc8f3bd9..bdee22541189 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -144,6 +144,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <400000000>;
};
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
deleted file mode 100644
index b27c6373ff4d..000000000000
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Reference Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "marzen";
- compatible = "renesas,marzen-reference", "renesas,r8a7779";
-
- chosen {
- bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x60000000 0x40000000>;
- };
-
- fixedregulator3v3: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- lan0@18000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x18000000 0x100>;
- pinctrl-0 = <&lan0_pins>;
- pinctrl-names = "default";
-
- phy-mode = "mii";
- interrupt-parent = <&irqpin0>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- smsc,irq-push-pull;
- reg-io-width = <4>;
- vddvario-supply = <&fixedregulator3v3>;
- vdd33a-supply = <&fixedregulator3v3>;
- };
-
- leds {
- compatible = "gpio-leds";
- led2 {
- gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
- };
- led3 {
- gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
- };
- led4 {
- gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&irqpin0 {
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif2_pins &scif4_pins>;
- pinctrl-names = "default";
-
- lan0_pins: lan0 {
- intc {
- renesas,groups = "intc_irq1_b";
- renesas,function = "intc";
- };
- lbsc {
- renesas,groups = "lbsc_ex_cs0";
- renesas,function = "lbsc";
- };
- };
-
- scif2_pins: serial2 {
- renesas,groups = "scif2_data_c";
- renesas,function = "scif2";
- };
-
- scif4_pins: serial4 {
- renesas,groups = "scif4_data";
- renesas,function = "scif4";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- hspi0_pins: hspi0 {
- renesas,groups = "hspi0";
- renesas,function = "hspi0";
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <4>;
- status = "okay";
-};
-
-&hspi0 {
- pinctrl-0 = <&hspi0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index a7af2c2371f2..5745555df943 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -11,17 +11,131 @@
/dts-v1/;
#include "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "marzen";
compatible = "renesas,marzen", "renesas,r8a7779";
+ aliases {
+ serial2 = &scif2;
+ serial4 = &scif4;
+ };
+
chosen {
- bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
};
memory {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
+
+ fixedregulator3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lan0@18000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x18000000 0x100>;
+ pinctrl-0 = <&lan0_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin0>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ smsc,irq-push-pull;
+ reg-io-width = <4>;
+ vddvario-supply = <&fixedregulator3v3>;
+ vdd33a-supply = <&fixedregulator3v3>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led2 {
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&irqpin0 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <31250000>;
+};
+
+&pfc {
+ lan0_pins: lan0 {
+ intc {
+ renesas,groups = "intc_irq1_b";
+ renesas,function = "intc";
+ };
+ lbsc {
+ renesas,groups = "lbsc_ex_cs0";
+ renesas,function = "lbsc";
+ };
+ };
+
+ scif2_pins: serial2 {
+ renesas,groups = "scif2_data_c";
+ renesas,function = "scif2";
+ };
+
+ scif4_pins: serial4 {
+ renesas,groups = "scif4_data";
+ renesas,function = "scif4";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+ renesas,function = "sdhi0";
+ };
+
+ hspi0_pins: hspi0 {
+ renesas,groups = "hspi0";
+ renesas,function = "hspi0";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif4 {
+ pinctrl-0 = <&scif4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&hspi0 {
+ pinctrl-0 = <&hspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index b517c8e6b420..94e2fc836492 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -11,6 +11,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/r8a7779-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -25,21 +26,25 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <1000000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <1000000000>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
+ clock-frequency = <1000000000>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
+ clock-frequency = <1000000000>;
};
};
@@ -157,6 +162,7 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc70000 0x1000>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
status = "disabled";
};
@@ -166,6 +172,7 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc71000 0x1000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
status = "disabled";
};
@@ -175,6 +182,7 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc72000 0x1000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
status = "disabled";
};
@@ -184,6 +192,67 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc73000 0x1000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ scif0: serial@ffe40000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe40000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif1: serial@ffe41000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe41000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif2: serial@ffe42000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe42000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif3: serial@ffe43000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe43000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif4: serial@ffe44000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe44000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif5: serial@ffe45000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe45000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -201,12 +270,14 @@
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_SATA>;
};
sdhi0: sd@ffe4c000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4c000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -216,6 +287,7 @@
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4d000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -225,6 +297,7 @@
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4e000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -234,6 +307,7 @@
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4f000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -245,6 +319,7 @@
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
status = "disabled";
};
@@ -254,6 +329,7 @@
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
status = "disabled";
};
@@ -263,6 +339,150 @@
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: clocks@ffc80000 {
+ compatible = "renesas,r8a7779-cpg-clocks";
+ reg = <0xffc80000 0x30>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "plla", "z", "zs", "s",
+ "s1", "p", "b", "out";
+ };
+
+ /* Fixed factor clocks */
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ s3_clk: s3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "s3";
+ };
+ s4_clk: s4_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <16>;
+ clock-mult = <1>;
+ clock-output-names = "s4";
+ };
+ g_clk: g_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "g";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: clocks@ffc80030 {
+ compatible = "renesas,r8a7779-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xffc80030 4>;
+ clocks = <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7779_CLK_HSPI R8A7779_CLK_TMU2
+ R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
+ R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
+ R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
+ R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
+ R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
+ R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
+ R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+ >;
+ clock-output-names =
+ "hspi", "tmu2", "tmu1", "tmu0", "hscif1",
+ "hscif0", "scif5", "scif4", "scif3", "scif2",
+ "scif1", "scif0", "i2c3", "i2c2", "i2c1",
+ "i2c0";
+ };
+ mstp1_clks: clocks@ffc80034 {
+ compatible = "renesas,r8a7779-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xffc80034 4>, <0xffc80044 4>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_S>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7779_CLK_USB01 R8A7779_CLK_USB2
+ R8A7779_CLK_DU R8A7779_CLK_VIN2
+ R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
+ R8A7779_CLK_ETHER R8A7779_CLK_SATA
+ R8A7779_CLK_PCIE R8A7779_CLK_VIN3
+ >;
+ clock-output-names =
+ "usb01", "usb2",
+ "du", "vin2",
+ "vin1", "vin0",
+ "ether", "sata",
+ "pcie", "vin3";
+ };
+ mstp3_clks: clocks@ffc8003c {
+ compatible = "renesas,r8a7779-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xffc8003c 4>;
+ clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
+ <&s4_clk>, <&s4_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
+ R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
+ R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
+ >;
+ clock-output-names =
+ "sdhi3", "sdhi2", "sdhi1", "sdhi0",
+ "mmc1", "mmc0";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index e01e5a081def..36c771a2d765 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -19,6 +19,41 @@
reg = <0x0 0x08000000>;
};
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ core-module@10000000 {
+ compatible = "arm,core-module-versatile", "syscon";
+ reg = <0x10000000 0x200>;
+
+ /* OSC1 on AB, OSC4 on PB */
+ osc1: cm_aux_osc@24M {
+ #clock-cells = <0>;
+ compatible = "arm,versatile-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ pclk: pclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
flash@34000000 {
compatible = "arm,versatile-flash";
reg = <0x34000000 0x4000000>;
@@ -59,6 +94,8 @@
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x1000>;
+ clear-mask = <0xffffffff>;
+ valid-mask = <0xffffffff>;
};
sic: intc@10003000 {
@@ -68,69 +105,93 @@
reg = <0x10003000 0x1000>;
interrupt-parent = <&vic>;
interrupts = <31>; /* Cascaded to vic */
+ clear-mask = <0xffffffff>;
+ valid-mask = <0xffc203f8>;
};
dma@10130000 {
compatible = "arm,pl081", "arm,primecell";
reg = <0x10130000 0x1000>;
interrupts = <17>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart0: uart@101f1000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f1000 0x1000>;
interrupts = <12>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart1: uart@101f2000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f2000 0x1000>;
interrupts = <13>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart2: uart@101f3000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f3000 0x1000>;
interrupts = <14>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
smc@10100000 {
compatible = "arm,primecell";
reg = <0x10100000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
mpmc@10110000 {
compatible = "arm,primecell";
reg = <0x10110000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
display@10120000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x10120000 0x1000>;
interrupts = <16>;
+ clocks = <&osc1>, <&pclk>;
+ clock-names = "clcd", "apb_pclk";
};
sctl@101e0000 {
compatible = "arm,primecell";
reg = <0x101e0000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
watchdog@101e1000 {
compatible = "arm,primecell";
reg = <0x101e1000 0x1000>;
interrupts = <0>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
timer@101e2000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e2000 0x1000>;
interrupts = <4>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer0", "timer1", "apb_pclk";
};
timer@101e3000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e3000 0x1000>;
interrupts = <5>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer0", "timer1", "apb_pclk";
};
gpio0: gpio@101e4000 {
@@ -141,6 +202,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
gpio1: gpio@101e5000 {
@@ -151,24 +214,32 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
rtc@101e8000 {
compatible = "arm,pl030", "arm,primecell";
reg = <0x101e8000 0x1000>;
interrupts = <10>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
sci@101f0000 {
compatible = "arm,primecell";
reg = <0x101f0000 0x1000>;
interrupts = <15>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
ssp@101f4000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x101f4000 0x1000>;
interrupts = <11>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
};
fpga {
@@ -181,23 +252,31 @@
compatible = "arm,primecell";
reg = <0x4000 0x1000>;
interrupts = <24>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
mmc@5000 {
- compatible = "arm,primecell";
+ compatible = "arm,pl180", "arm,primecell";
reg = < 0x5000 0x1000>;
interrupts-extended = <&vic 22 &sic 2>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x6000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <3>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@7000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x7000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <4>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
};
};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 65f657711323..d025048119d3 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -13,6 +13,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
gpio3: gpio@101e7000 {
@@ -23,6 +25,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
fpga {
@@ -31,17 +35,23 @@
reg = <0x9000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <6>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
sci@a000 {
compatible = "arm,primecell";
reg = <0xa000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <5>;
+ clocks = <&xtal24mhz>;
+ clock-names = "apb_pclk";
};
mmc@b000 {
- compatible = "arm,primecell";
+ compatible = "arm,pl180", "arm,primecell";
reg = <0xb000 0x1000>;
interrupts-extended = <&vic 23 &sic 2>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
};
};
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index fd6bff0c5b96..19211324772f 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -233,13 +233,13 @@ static void __init sp804_of_init(struct device_node *np)
if (IS_ERR(clk1))
clk1 = NULL;
- /* Get the 2nd clock if the timer has 2 timer clocks */
+ /* Get the 2nd clock if the timer has 3 timer clocks */
if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
clk2 = of_clk_get(np, 1);
if (IS_ERR(clk2)) {
pr_err("sp804: %s clock not found: %d\n", np->name,
(int)PTR_ERR(clk2));
- goto err;
+ clk2 = NULL;
}
} else
clk2 = clk1;
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index bada59d93b67..63bde0efc041 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,6 +1,7 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
@@ -35,10 +36,8 @@ CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
-CONFIG_MACH_IMX27IPCAM=y
CONFIG_MACH_IMX27_DT=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
@@ -159,6 +158,8 @@ CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 59b7e45142d8..16cfec4385c8 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,5 +1,6 @@
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=18
@@ -31,11 +32,12 @@ CONFIG_MACH_IMX35_DT=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
CONFIG_PCI=y
CONFIG_PCI_IMX6=y
@@ -67,6 +69,8 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
@@ -160,6 +164,7 @@ CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
+CONFIG_GPIO_STMPE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
@@ -242,6 +247,7 @@ CONFIG_RTC_DRV_SNVS=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
+CONFIG_FSL_EDMA=y
CONFIG_STAGING=y
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_FB_HELPER=y
@@ -288,6 +294,7 @@ CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 534836497998..f70ea2116fec 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -27,7 +27,7 @@ CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index a9f992335eb2..c7906c2fd645 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,4 +1,5 @@
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig
deleted file mode 100644
index ad6b61b0bd11..000000000000
--- a/arch/arm/configs/s5p64x0_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P64X0=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6440=y
-CONFIG_MACH_SMDK6450=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
deleted file mode 100644
index 41bafc94dd85..000000000000
--- a/arch/arm/configs/s5pc100_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PC100=y
-CONFIG_MACH_SMDKC100=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT24=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 9d853189028b..e35d880f9773 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -275,7 +275,7 @@ void store_cpu_topology(unsigned int cpuid)
cpu_topology[cpuid].socket_id, mpidr);
}
-static inline const int cpu_corepower_flags(void)
+static inline int cpu_corepower_flags(void)
{
return SD_SHARE_PKG_RESOURCES | SD_SHARE_POWERDOMAIN;
}
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 5306de350133..312d43eb686a 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -19,6 +19,7 @@
* Author: Will Deacon <will.deacon@arm.com>
*/
+#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -36,6 +37,7 @@ struct arm_delay_ops arm_delay_ops = {
static const struct delay_timer *delay_timer;
static bool delay_calibrated;
+static u64 delay_res;
int read_current_timer(unsigned long *timer_val)
{
@@ -47,6 +49,11 @@ int read_current_timer(unsigned long *timer_val)
}
EXPORT_SYMBOL_GPL(read_current_timer);
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+ return (cyc * mult) >> shift;
+}
+
static void __timer_delay(unsigned long cycles)
{
cycles_t start = get_cycles();
@@ -69,18 +76,24 @@ static void __timer_udelay(unsigned long usecs)
void __init register_current_timer_delay(const struct delay_timer *timer)
{
- if (!delay_calibrated) {
- pr_info("Switching to timer-based delay loop\n");
+ u32 new_mult, new_shift;
+ u64 res;
+
+ clocks_calc_mult_shift(&new_mult, &new_shift, timer->freq,
+ NSEC_PER_SEC, 3600);
+ res = cyc_to_ns(1ULL, new_mult, new_shift);
+
+ if (!delay_calibrated && (!delay_res || (res < delay_res))) {
+ pr_info("Switching to timer-based delay loop, resolution %lluns\n", res);
delay_timer = timer;
lpj_fine = timer->freq / HZ;
+ delay_res = res;
/* cpufreq may scale loops_per_jiffy, so keep a private copy */
arm_delay_ops.ticks_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
-
- delay_calibrated = true;
} else {
pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
}
@@ -91,3 +104,8 @@ unsigned long calibrate_delay_is_known(void)
delay_calibrated = true;
return lpj_fine;
}
+
+void calibration_delay_done(void)
+{
+ delay_calibrated = true;
+}
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 2631cfc5ab0d..24f85be71671 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -13,7 +13,9 @@ config MACH_BERLIN_BG2
bool "Marvell Armada 1500 (BG2)"
select CACHE_L2X0
select CPU_PJ4B
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
select PINCTRL_BERLIN_BG2
config MACH_BERLIN_BG2CD
@@ -25,6 +27,7 @@ config MACH_BERLIN_BG2CD
config MACH_BERLIN_BG2Q
bool "Marvell Armada 1500 Pro (BG2-Q)"
select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL_BERLIN_BG2Q
diff --git a/arch/arm/mach-berlin/Makefile b/arch/arm/mach-berlin/Makefile
index ab69fe956f49..c0719ecd1890 100644
--- a/arch/arm/mach-berlin/Makefile
+++ b/arch/arm/mach-berlin/Makefile
@@ -1 +1,2 @@
-obj-y += berlin.o
+obj-y += berlin.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-berlin/headsmp.S b/arch/arm/mach-berlin/headsmp.S
new file mode 100644
index 000000000000..4a4c56a58ad3
--- /dev/null
+++ b/arch/arm/mach-berlin/headsmp.S
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+ENTRY(berlin_secondary_startup)
+ ARM_BE8(setend be)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(berlin_secondary_startup)
+
+/*
+ * If the following instruction is set in the reset exception vector, CPUs
+ * will fetch the value of the software reset address vector when being
+ * reset.
+ */
+.global boot_inst
+boot_inst:
+ ldr pc, [pc, #140]
+
+ .align
diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c
new file mode 100644
index 000000000000..702e7982015a
--- /dev/null
+++ b/arch/arm/mach-berlin/platsmp.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define CPU_RESET 0x00
+
+#define RESET_VECT 0x00
+#define SW_RESET_ADDR 0x94
+
+extern void berlin_secondary_startup(void);
+extern u32 boot_inst;
+
+static void __iomem *cpu_ctrl;
+
+static inline void berlin_perform_reset_cpu(unsigned int cpu)
+{
+ u32 val;
+
+ val = readl(cpu_ctrl + CPU_RESET);
+ val |= BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET);
+}
+
+static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (!cpu_ctrl)
+ return -EFAULT;
+
+ /*
+ * Reset the CPU, making it to execute the instruction in the reset
+ * exception vector.
+ */
+ berlin_perform_reset_cpu(cpu);
+
+ return 0;
+}
+
+static void __init berlin_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *np;
+ void __iomem *scu_base;
+ void __iomem *vectors_base;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ scu_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!scu_base)
+ return;
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,berlin-cpu-ctrl");
+ cpu_ctrl = of_iomap(np, 0);
+ of_node_put(np);
+ if (!cpu_ctrl)
+ goto unmap_scu;
+
+ vectors_base = ioremap(CONFIG_VECTORS_BASE, SZ_32K);
+ if (!vectors_base)
+ goto unmap_scu;
+
+ scu_enable(scu_base);
+ flush_cache_all();
+
+ /*
+ * Write the first instruction the CPU will execute after being reset
+ * in the reset exception vector.
+ */
+ writel(boot_inst, vectors_base + RESET_VECT);
+
+ /*
+ * Write the secondary startup address into the SW reset address
+ * vector. This is used by boot_inst.
+ */
+ writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR);
+
+ iounmap(vectors_base);
+unmap_scu:
+ iounmap(scu_base);
+}
+
+static struct smp_operations berlin_smp_ops __initdata = {
+ .smp_prepare_cpus = berlin_smp_prepare_cpus,
+ .smp_boot_secondary = berlin_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 80cbbc74d2c8..2a43a1734eca 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -335,7 +335,9 @@ static void __init exynos_dt_machine_init(void)
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
- exynos_cpuidle_init();
+ if (!of_machine_is_compatible("samsung,exynos5420"))
+ exynos_cpuidle_init();
+
exynos_cpufreq_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 572f6b1a08f1..4d86961a7957 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -39,15 +39,17 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
for (;;) {
- /* make cpu1 to be turned off at next WFI command */
- if (cpu == 1)
- exynos_cpu_power_down(cpu);
+ /* Turn the CPU off on next WFI instruction. */
+ exynos_cpu_power_down(core_id);
wfi();
- if (pen_release == cpu_logical_map(cpu)) {
+ if (pen_release == core_id) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index ace0ed617476..13a210865c6f 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -257,10 +257,46 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
return -ETIMEDOUT; /* timeout */
}
+static void exynos_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ arch_spin_lock(&exynos_mcpm_lock);
+ if (cpu_use_count[cpu][cluster] == 0)
+ cpu_use_count[cpu][cluster] = 1;
+ arch_spin_unlock(&exynos_mcpm_lock);
+}
+
+static void exynos_suspend(u64 residency)
+{
+ unsigned int mpidr, cpunr;
+
+ exynos_power_down();
+
+ /*
+ * Execution reaches here only if cpu did not power down.
+ * Hence roll back the changes done in exynos_power_down function.
+ *
+ * CAUTION: "This function requires the stack data to be visible through
+ * power down and can only be executed on processors like A15 and A7
+ * that hit the cache with the C bit clear in the SCTLR register."
+ */
+ mpidr = read_cpuid_mpidr();
+ cpunr = exynos_pmu_cpunr(mpidr);
+
+ exynos_cpu_power_up(cpunr);
+}
+
static const struct mcpm_platform_ops exynos_power_ops = {
.power_up = exynos_power_up,
.power_down = exynos_power_down,
.wait_for_powerdown = exynos_wait_for_powerdown,
+ .suspend = exynos_suspend,
+ .powered_up = exynos_powered_up,
};
static void __init exynos_mcpm_usage_count_init(void)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 39ad38f561f8..a43822698361 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -89,7 +89,8 @@ static void exynos_secondary_init(unsigned int cpu)
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
- unsigned long phys_cpu = cpu_logical_map(cpu);
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
int ret = -ENOSYS;
/*
@@ -103,17 +104,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
- * Note that "pen_release" is the hardware CPU ID, whereas
+ * Note that "pen_release" is the hardware CPU core ID, whereas
* "cpu" is Linux's internal ID.
*/
- write_pen_release(phys_cpu);
+ write_pen_release(core_id);
- if (!exynos_cpu_power_state(cpu)) {
- exynos_cpu_power_up(cpu);
+ if (!exynos_cpu_power_state(core_id)) {
+ exynos_cpu_power_up(core_id);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
- while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
+ while (exynos_cpu_power_state(core_id)
+ != S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -144,20 +146,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
- ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
goto fail;
if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) {
ret = PTR_ERR(boot_reg);
goto fail;
}
- __raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ __raw_writel(boot_addr, cpu_boot_reg(core_id));
}
- call_firmware_op(cpu_boot, phys_cpu);
+ call_firmware_op(cpu_boot, core_id);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
@@ -226,22 +228,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
* boot register if it fails.
*/
for (i = 1; i < max_cpus; ++i) {
- unsigned long phys_cpu;
unsigned long boot_addr;
+ u32 mpidr;
+ u32 core_id;
int ret;
- phys_cpu = cpu_logical_map(i);
+ mpidr = cpu_logical_map(i);
+ core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
- ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
break;
if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg))
break;
- __raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ __raw_writel(boot_addr, cpu_boot_reg(core_id));
}
}
}
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 1993e6bd5388..c45a2dc53e84 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -319,4 +319,13 @@
#define EXYNOS5420_SWRESET_KFC_SEL 0x3
+#include <asm/cputype.h>
+#define MAX_CPUS_IN_CLUSTER 4
+
+static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
+{
+ return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
+ + MPIDR_AFFINITY_LEVEL(mpidr, 0));
+}
+
#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4b5185748f74..2bc7b97861b4 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,18 +65,8 @@ config IMX_HAVE_IOMUX_V1
config ARCH_MXC_IOMUX_V3
bool
-config ARCH_MX1
- bool
-
-config ARCH_MX25
- bool
-
-config MACH_MX27
- bool
-
config SOC_IMX1
bool
- select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -89,7 +79,6 @@ config SOC_IMX21
config SOC_IMX25
bool
- select ARCH_MX25
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
@@ -100,7 +89,6 @@ config SOC_IMX27
select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
- select MACH_MX27
select MXC_AVIC
select PINCTRL_IMX27
@@ -119,18 +107,6 @@ config SOC_IMX35
select PINCTRL_IMX35
select SMP_ON_UP if SMP
-config SOC_IMX5
- bool
- select ARCH_HAS_OPP
- select ARCH_MXC_IOMUX_V3
- select MXC_TZIC
-
-config SOC_IMX51
- bool
- select HAVE_IMX_SRC
- select PINCTRL_IMX51
- select SOC_IMX5
-
if ARCH_MULTI_V4T
comment "MX1 platforms:"
@@ -366,15 +342,6 @@ config MACH_IMX27_VISSTRIM_M10
This includes specific configurations for the board and its
peripherals.
-config MACH_IMX27LITE
- bool "LogicPD MX27 LITEKIT platform"
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX27
- help
- Include support for MX27 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -406,15 +373,6 @@ config MACH_MXT_TD60
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
-config MACH_IMX27IPCAM
- bool "IMX27 IPCAM platform"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX27
- help
- Include support for IMX27 IPCAM platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
@@ -700,24 +658,29 @@ if ARCH_MULTI_V7
comment "Device tree only"
+config SOC_IMX5
+ bool
+ select ARCH_HAS_OPP
+ select HAVE_IMX_SRC
+ select MXC_TZIC
+
config SOC_IMX50
bool "i.MX50 support"
- select HAVE_IMX_SRC
select PINCTRL_IMX50
select SOC_IMX5
help
This enables support for Freescale i.MX50 processor.
-config MACH_IMX51_DT
+config SOC_IMX51
bool "i.MX51 support"
- select SOC_IMX51
+ select PINCTRL_IMX51
+ select SOC_IMX5
help
This enables support for Freescale i.MX51 processor
config SOC_IMX53
bool "i.MX53 support"
- select HAVE_IMX_SRC
select PINCTRL_IMX53
select SOC_IMX5
@@ -734,8 +697,6 @@ config SOC_IMX6
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
- select PL310_ERRATA_588369 if CACHE_L2X0
- select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
config SOC_IMX6Q
@@ -771,8 +732,6 @@ config SOC_VF610
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
- select PL310_ERRATA_588369 if CACHE_L2X0
- select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index bbe93bbfd003..ac88599ca080 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o \
@@ -31,6 +31,8 @@ ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+# i.MX6SX reuses i.MX6Q cpuidle driver
+obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o
endif
ifdef CONFIG_SND_IMX_SOC
@@ -38,9 +40,6 @@ obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
# i.MX1 based machines
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
@@ -60,13 +59,11 @@ obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
@@ -109,8 +106,8 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
+obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 7f739be3de2c..37c307a8d896 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -15,100 +15,103 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx1-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-/* CCM register addresses */
-#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_PCDR IO_ADDR_CCM(0x20)
-
-/* SCM register addresses */
-#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-#define SCM_GCCR IO_ADDR_SCM(0xc)
-
static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
"prem", "fclk", };
-enum imx1_clks {
- dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
- spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
- uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
- usbd_gate, clk_max
-};
+static struct clk *clk[IMX1_CLK_MAX];
+static struct clk_onecell_data clk_data;
-static struct clk *clk[clk_max];
+static void __iomem *ccm __initdata;
+#define CCM_CSCR (ccm + 0x0000)
+#define CCM_MPCTL0 (ccm + 0x0004)
+#define CCM_SPCTL0 (ccm + 0x000c)
+#define CCM_PCDR (ccm + 0x0020)
+#define SCM_GCCR (ccm + 0x0810)
-int __init mx1_clocks_init(unsigned long fref)
+static void __init _mx1_clocks_init(unsigned long fref)
{
- int i;
+ clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+ clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
+ clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+ clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+ clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
+ clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+ clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+ clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+ clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
+ clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+ clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+ clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+ clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
+ clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+ clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+ clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[clk32] = imx_clk_fixed("clk32", fref);
- clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
- clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
- clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
- clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
- ARRAY_SIZE(prem_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
- clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
- clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
- clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
- clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
- clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
- clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
- clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
- clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
- clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
- clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
- ARRAY_SIZE(clko_sel_clks));
- clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
- clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
- clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
- clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
- clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
- clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
- clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+int __init mx1_clocks_init(unsigned long fref)
+{
+ ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("imx1 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ _mx1_clocks_init(fref);
- clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
- clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
- clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
- clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
- clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
- clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
+
+static void __init mx1_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+ BUG_ON(!ccm);
+
+ _mx1_clocks_init(32768);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index bdc2e4630a08..4b4c75339aa6 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -7,178 +7,165 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
*/
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/err.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx21-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;
/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-static const char *mpll_sel_clks[] = { "fpm", "ckih", };
-static const char *spll_sel_clks[] = { "fpm", "ckih", };
-
-enum imx21_clks {
- ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
- per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
- uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
- pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
- lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
- per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
- ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
- emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
- gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
+
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
+static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", };
+
+static struct clk *clk[IMX21_CLK_MAX];
+static struct clk_onecell_data clk_data;
+
+static void __init _mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ BUG_ON(!ccm);
+
+ clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref);
+ clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href);
+ clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+ clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+
+ clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2);
+ clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+ clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+ clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks));
+ clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3);
+
+ clk[IMX21_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+
+ clk[IMX21_CLK_SPLL] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+
+ clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4);
+ clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+
+ clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6);
+ clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6);
+ clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6);
+ clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6);
+
+ clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+ clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+ clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+ clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+ clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+ clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23);
+ clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+ clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25);
+ clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+ clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+ clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+ clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+ clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+
+ clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+ clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
int __init mx21_clocks_init(unsigned long lref, unsigned long href)
{
- int i;
-
- clk[ckil] = imx_clk_fixed("ckil", lref);
- clk[ckih] = imx_clk_fixed("ckih", href);
- clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
- clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
- ARRAY_SIZE(mpll_sel_clks));
- clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
- ARRAY_SIZE(spll_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
- clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
- clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
- clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
- clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
- clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
- clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
- clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
- clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
- clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
- clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
- clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
- clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
- clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
- clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
- clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
- clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
- clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
- clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
- clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
- clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
- clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
- clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
- clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
- clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
- clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
- clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
- clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
- clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
- clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
- clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
- clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
- clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
-
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX21 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[per1], "per1", NULL);
- clk_register_clkdev(clk[per2], "per2", NULL);
- clk_register_clkdev(clk[per3], "per3", NULL);
- clk_register_clkdev(clk[per4], "per4", NULL);
- clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
- clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
- clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
- clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
- clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
- clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
- clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
- clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
- clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
- clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[brom_gate], "brom", NULL);
- clk_register_clkdev(clk[emma_gate], "emma", NULL);
- clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
- clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
- clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
- clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
- clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
- clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
- clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
- clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+ ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K);
+
+ _mx21_clocks_init(lref, href);
+
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");
mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
return 0;
}
+
+static void __init mx21_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+
+ _mx21_clocks_init(32768, 26000000);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index ae578c096ad8..59c0c8558c6b 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -32,8 +32,6 @@
#include "hardware.h"
#include "mx25.h"
-#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
#define CCM_CCTL 0x08
@@ -56,7 +54,7 @@
#define CCM_LTR3 0x4c
#define CCM_MCR 0x64
-#define ccm(x) (CRM_BASE + (x))
+#define ccm(x) (ccm_base + (x))
static struct clk_onecell_data clk_data;
@@ -91,9 +89,10 @@ enum mx25_clks {
static struct clk *clk[clk_max];
-static int __init __mx25_clocks_init(unsigned long osc_rate)
+static int __init __mx25_clocks_init(unsigned long osc_rate,
+ void __iomem *ccm_base)
{
- int i;
+ BUG_ON(!ccm_base);
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[osc] = imx_clk_fixed("osc", osc_rate);
@@ -224,19 +223,13 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX25 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_prepare_enable(clk[emi_ahb]);
/* Clock source for gpt must be derived from AHB */
clk_set_parent(clk[per5_sel], clk[ahb]);
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-
/*
* Let's initially set up CLKO parent as ipg, since this configuration
* is used on some imx25 board designs to clock the audio codec.
@@ -248,8 +241,14 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
int __init mx25_clocks_init(void)
{
- __mx25_clocks_init(24000000);
+ void __iomem *ccm;
+ ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
+
+ __mx25_clocks_init(24000000, ccm);
+
+ clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@@ -314,29 +313,27 @@ int __init mx25_clocks_init(void)
return 0;
}
-int __init mx25_clocks_init_dt(void)
+static void __init mx25_clocks_init_dt(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *refnp;
unsigned long osc_rate = 24000000;
+ void __iomem *ccm;
/* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
+ if (of_property_read_u32(refnp, "clock-frequency", &rate))
continue;
- if (of_device_is_compatible(np, "fsl,imx-osc"))
+ if (of_device_is_compatible(refnp, "fsl,imx-osc"))
osc_rate = rate;
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+ ccm = of_iomap(np, 0);
+ __mx25_clocks_init(osc_rate, ccm);
+
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- __mx25_clocks_init(osc_rate);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
-
- return 0;
}
+CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 317a662626d6..ab6349ec23b9 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -1,61 +1,36 @@
#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <linux/clk-provider.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx27-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;
/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS (1 << 31)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC (1 << 15)
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_MPCTL1 (ccm + 0x08)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_SPCTL1 (ccm + 0x10)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
+#define CCM_CCSR (ccm + 0x28)
static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
-static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
static const char *clko_sel_clks[] = {
- "ckil", "fpm", "ckih", "ckih",
- "ckih", "mpll", "spll", "cpu_div",
+ "ckil", "fpm", "ckih_gate", "ckih_gate",
+ "ckih_gate", "mpll", "spll", "cpu_div",
"ahb", "ipg", "per1_div", "per2_div",
"per3_div", "per4_div", "ssi1_div", "ssi2_div",
"nfc_div", "mshc_div", "vpu_div", "60m",
@@ -64,239 +39,220 @@ static const char *clko_sel_clks[] = {
static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
-enum mx27_clks {
- dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
- per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
- clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
- clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
- sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
- rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
- kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
- gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
- gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
- emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
- cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
- vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
- usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
- vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
- csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
- uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
- uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
- mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
- rtic_ahb_gate, mshc_baud_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
-int __init mx27_clocks_init(unsigned long fref)
+static void __init _mx27_clocks_init(unsigned long fref)
{
- int i;
- struct device_node *np;
-
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckih] = imx_clk_fixed("ckih", fref);
- clk[ckil] = imx_clk_fixed("ckil", 32768);
- clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
- clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3);
+ BUG_ON(!ccm);
- clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1,
- mpll_osc_sel_clks,
- ARRAY_SIZE(mpll_osc_sel_clks));
- clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
- ARRAY_SIZE(mpll_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
- clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+ clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref);
+ clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768);
+ clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
+ clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+ clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX27_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+ clk[IMX27_CLK_SPLL] = imx_clk_pllv1("spll", "ckih_gate", CCM_SPCTL0);
+ clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
- clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+ clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
} else {
- clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
- clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+ clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
}
- clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
- clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
- clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
- clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
- clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
- clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
- clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
- clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
- clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
- clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
+ clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+ clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+ clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+ clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+ clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+ clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+ clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
+ clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
+ clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
else
- clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
- clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
- clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
- clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
- clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
- clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
- clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
- clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
- clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
- clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
- clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
- clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
- clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
- clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
- clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
- clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
- clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
- clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
- clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
- clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
- clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
- clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
- clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
- clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
- clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
- clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
- clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
- clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
- clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
- clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
- clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
- clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
- clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
- clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
- clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
- clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
- clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
- clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
- clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
- clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
- clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
- clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
- clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
- clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
- clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
- clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
- clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
- clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
- clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
- clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
- clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
- clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
- clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX27 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+ clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+ clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
+ clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+ clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+ clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+ clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+ clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+ clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+ clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+ clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+ clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+ clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+ clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+ clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+ clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+ clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
+ clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
+ clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
+ clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
+ clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
+ clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
+ clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
+ clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
+ clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+ clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+ clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+ clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
+ clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+ clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+ clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+ clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+ clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+ clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+ clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+ clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+ clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+ clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
- if (np) {
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
- clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
- clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
- clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
- clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0");
- clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1");
- clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2");
- clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2");
- clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
- clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
- clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
- clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
- clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
- clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
- clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
- clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
- clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
- clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
- clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
+ clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0");
- mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
-
- clk_prepare_enable(clk[emi_ahb_gate]);
+ clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
imx_print_silicon_rev("i.MX27", mx27_revision());
+}
+
+int __init mx27_clocks_init(unsigned long fref)
+{
+ ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
+
+ _mx27_clocks_init(fref);
+
+ clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
+
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
return 0;
}
-int __init mx27_clocks_init_dt(void)
+static void __init mx27_clocks_init_dt(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *refnp;
u32 fref = 26000000; /* default */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
continue;
- if (!of_property_read_u32(np, "clock-frequency", &fref))
+ if (!of_property_read_u32(refnp, "clock-frequency", &fref))
break;
}
- return mx27_clocks_init(fref);
+ ccm = of_iomap(np, 0);
+
+ _mx27_clocks_init(fref);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 4a9de0835eb1..286ef422cebc 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -51,7 +51,6 @@ static struct clk_onecell_data clk_data;
int __init mx31_clocks_init(unsigned long fref)
{
void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
- int i;
struct device_node *np;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -114,10 +113,7 @@ int __init mx31_clocks_init(unsigned long fref)
clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("imx31 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 71c86a2f856d..a0d2b57fd376 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -75,7 +75,6 @@ int __init mx35_clocks_init(void)
u32 pdr0, consumer_sel, hsp_sel;
struct arm_ahb_div *aad;
unsigned char *hsp_div;
- u32 i;
pdr0 = __raw_readl(base + MXC_CCM_PDR0);
consumer_sel = (pdr0 >> 16) & 0xf;
@@ -200,10 +199,7 @@ int __init mx35_clocks_init(void)
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX35 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 21d2b111c83d..72d65214223e 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -18,11 +18,54 @@
#include <linux/of_irq.h>
#include <dt-bindings/clock/imx5-clock.h>
-#include "crm-regs-imx5.h"
#include "clk.h"
#include "common.h"
#include "hardware.h"
+#define MX51_DPLL1_BASE 0x83f80000
+#define MX51_DPLL2_BASE 0x83f84000
+#define MX51_DPLL3_BASE 0x83f88000
+
+#define MX53_DPLL1_BASE 0x63f80000
+#define MX53_DPLL2_BASE 0x63f84000
+#define MX53_DPLL3_BASE 0x63f88000
+#define MX53_DPLL4_BASE 0x63f8c000
+
+#define MXC_CCM_CCR (ccm_base + 0x00)
+#define MXC_CCM_CCDR (ccm_base + 0x04)
+#define MXC_CCM_CSR (ccm_base + 0x08)
+#define MXC_CCM_CCSR (ccm_base + 0x0c)
+#define MXC_CCM_CACRR (ccm_base + 0x10)
+#define MXC_CCM_CBCDR (ccm_base + 0x14)
+#define MXC_CCM_CBCMR (ccm_base + 0x18)
+#define MXC_CCM_CSCMR1 (ccm_base + 0x1c)
+#define MXC_CCM_CSCMR2 (ccm_base + 0x20)
+#define MXC_CCM_CSCDR1 (ccm_base + 0x24)
+#define MXC_CCM_CS1CDR (ccm_base + 0x28)
+#define MXC_CCM_CS2CDR (ccm_base + 0x2c)
+#define MXC_CCM_CDCDR (ccm_base + 0x30)
+#define MXC_CCM_CHSCDR (ccm_base + 0x34)
+#define MXC_CCM_CSCDR2 (ccm_base + 0x38)
+#define MXC_CCM_CSCDR3 (ccm_base + 0x3c)
+#define MXC_CCM_CSCDR4 (ccm_base + 0x40)
+#define MXC_CCM_CWDR (ccm_base + 0x44)
+#define MXC_CCM_CDHIPR (ccm_base + 0x48)
+#define MXC_CCM_CDCR (ccm_base + 0x4c)
+#define MXC_CCM_CTOR (ccm_base + 0x50)
+#define MXC_CCM_CLPCR (ccm_base + 0x54)
+#define MXC_CCM_CISR (ccm_base + 0x58)
+#define MXC_CCM_CIMR (ccm_base + 0x5c)
+#define MXC_CCM_CCOSR (ccm_base + 0x60)
+#define MXC_CCM_CGPR (ccm_base + 0x64)
+#define MXC_CCM_CCGR0 (ccm_base + 0x68)
+#define MXC_CCM_CCGR1 (ccm_base + 0x6c)
+#define MXC_CCM_CCGR2 (ccm_base + 0x70)
+#define MXC_CCM_CCGR3 (ccm_base + 0x74)
+#define MXC_CCM_CCGR4 (ccm_base + 0x78)
+#define MXC_CCM_CCGR5 (ccm_base + 0x7c)
+#define MXC_CCM_CCGR6 (ccm_base + 0x80)
+#define MXC_CCM_CCGR7 (ccm_base + 0x84)
+
/* Low-power Audio Playback Mode clock */
static const char *lp_apm_sel[] = { "osc", };
@@ -86,17 +129,15 @@ static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
-static void __init mx5_clocks_common_init(unsigned long rate_ckil,
- unsigned long rate_osc, unsigned long rate_ckih1,
- unsigned long rate_ckih2)
+static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
- int i;
+ imx5_pm_set_ccm_base(ccm_base);
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", rate_ckil);
- clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", rate_osc);
- clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", rate_ckih1);
- clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", rate_ckih2);
+ clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0);
clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
@@ -244,58 +285,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[IMX5_CLK_SAHARA_IPG_GATE] = imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14);
clk[IMX5_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX5 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[IMX5_CLK_GPT_HF_GATE], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX5_CLK_GPT_IPG_GATE], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX5_CLK_UART1_PER_GATE], "per", "imx21-uart.0");
- clk_register_clkdev(clk[IMX5_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[IMX5_CLK_UART2_PER_GATE], "per", "imx21-uart.1");
- clk_register_clkdev(clk[IMX5_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[IMX5_CLK_UART3_PER_GATE], "per", "imx21-uart.2");
- clk_register_clkdev(clk[IMX5_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[IMX5_CLK_UART4_PER_GATE], "per", "imx21-uart.3");
- clk_register_clkdev(clk[IMX5_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[IMX5_CLK_UART5_PER_GATE], "per", "imx21-uart.4");
- clk_register_clkdev(clk[IMX5_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI1_PER_GATE], "per", "imx51-ecspi.0");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI1_IPG_GATE], "ipg", "imx51-ecspi.0");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
- clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
- clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_NFC_GATE], NULL, "imx51-nand");
- clk_register_clkdev(clk[IMX5_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[IMX5_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[IMX5_CLK_SSI3_IPG_GATE], NULL, "imx-ssi.2");
- clk_register_clkdev(clk[IMX5_CLK_SDMA_GATE], NULL, "imx35-sdma");
clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
- clk_register_clkdev(clk[IMX5_CLK_IIM_GATE], "iim", NULL);
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx-keypad");
- clk_register_clkdev(clk[IMX5_CLK_IPU_DI1_GATE], "di1", "imx-tve.0");
clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
- clk_register_clkdev(clk[IMX5_CLK_EPIT1_IPG_GATE], "ipg", "imx-epit.0");
- clk_register_clkdev(clk[IMX5_CLK_EPIT1_HF_GATE], "per", "imx-epit.0");
- clk_register_clkdev(clk[IMX5_CLK_EPIT2_IPG_GATE], "ipg", "imx-epit.1");
- clk_register_clkdev(clk[IMX5_CLK_EPIT2_HF_GATE], "per", "imx-epit.1");
/* Set SDHC parents to be PLL2 */
clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
@@ -322,12 +313,26 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
static void __init mx50_clocks_init(struct device_node *np)
{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
unsigned long r;
- int i;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -349,17 +354,12 @@ static void __init mx50_clocks_init(struct device_node *np)
clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX50 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(0, 0, 0, 0);
-
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -370,21 +370,32 @@ static void __init mx50_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
-int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
- unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init(struct device_node *np)
{
- int i;
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
u32 val;
- struct device_node *np;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+ pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
+
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
@@ -417,35 +428,12 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
clk[IMX5_CLK_SPDIF1_GATE] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX51 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
- np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm");
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
-
- clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
- clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx51.3");
-
/* set the usboh3 parent to pll2_sw */
clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);
@@ -453,9 +441,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);
- /* System timer */
- mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
-
clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
@@ -474,25 +459,35 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
val = readl(MXC_CCM_CLPCR);
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void __init mx51_clocks_init_dt(struct device_node *np)
-{
- mx51_clocks_init(0, 0, 0, 0);
}
-CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
static void __init mx53_clocks_init(struct device_node *np)
{
- int i;
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
unsigned long r;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
- clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -543,33 +538,12 @@ static void __init mx53_clocks_init(struct device_node *np)
clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX53 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(0, 0, 0, 0);
-
- clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
- clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx53.3");
-
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -583,7 +557,5 @@ static void __init mx53_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 8e795dea02ec..6cceb7765c14 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -19,6 +19,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
#include "clk.h"
#include "common.h"
@@ -70,51 +71,16 @@ static const char *cko_sels[] = { "cko1", "cko2", };
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
- "pcie_ref", "sata_ref",
+ "pcie_ref_125m", "sata_ref_100m",
};
-enum mx6q_clks {
- dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
- pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
- pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
- periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
- esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
- gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
- ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
- ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
- ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
- usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
- emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
- periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
- asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
- gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
- ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
- ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
- ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
- usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
- emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
- mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
- can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
- esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
- hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
- ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
- mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
- gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
- ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
- usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
- pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
- lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX6QDL_CLK_END];
static struct clk_onecell_data clk_data;
-static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom, arm,
+static unsigned int const clks_init_on[] __initconst = {
+ IMX6QDL_CLK_MMDC_CH0_AXI,
+ IMX6QDL_CLK_ROM,
+ IMX6QDL_CLK_ARM,
};
static struct clk_div_table clk_enet_ref_table[] = {
@@ -149,10 +115,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
int i;
int ret;
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
- clk[ckih] = imx_obtain_fixed_clock("ckih1", 0);
- clk[osc] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
base = of_iomap(np, 0);
@@ -166,14 +132,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
video_div_table[2].div = 1;
};
- /* type name parent_name base div_mask */
- clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
- clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
- clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
- clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
- clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
- clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
- clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
+ /* type name parent_name base div_mask */
+ clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
/*
* Bit 20 is the reserved and read-only bit, we do this only for:
@@ -181,28 +147,28 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
* - Keep refcount when do usbphy clk_enable/disable, in that case,
* the clk framework may need to enable/disable usbphy's parent
*/
- clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
- clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+ clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
/*
* usbphy*_gate needs to be on after system boots up, and software
* never needs to control it anymore.
*/
- clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
- clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+ clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
- clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
- clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+ clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+ clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
- clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
- clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+ clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+ clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
- clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
&imx_ccm_lock);
- clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
- clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
/*
* lvds1_gate and lvds2_gate are pseudo-gates. Both can be
@@ -210,29 +176,29 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
* the "output_enable" bit as a gate, even though it's really just
* enabling clock output.
*/
- clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
- clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
-
- /* name parent_name reg idx */
- clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
- clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
- clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
- clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
- clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
- clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
-
- /* name parent_name mult div */
- clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
- clk[pll3_80m] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
- clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
-
- clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+ clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+
+ /* name parent_name reg idx */
+ clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+
+ clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
np = ccm_node;
base = of_iomap(np, 0);
@@ -240,262 +206,254 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
imx6q_pm_set_ccm_base(base);
- /* name reg shift width parent_names num_parents */
- clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
- clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
- clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[spdif_sel] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[gpu2d_axi] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[gpu3d_axi] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[gpu2d_core_sel] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
- clk[gpu3d_core_sel] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
- clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
- clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
- clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
- clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[ssi2_sel] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[ssi3_sel] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[usdhc1_sel] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc2_sel] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc3_sel] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc4_sel] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[emi_sel] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
- clk[emi_slow_sel] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
- clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
- clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
- clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
- clk[cko2_sel] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
- clk[cko] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
-
- /* name reg shift width busy: reg, shift parent_names num_parents */
- clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
- clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
-
- /* name parent_name reg shift width */
- clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
- clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clk[ipg_per] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
- clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
- clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
- clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
- clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
- clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
- clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clk[can_root] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
- clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
- clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
- clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
- clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
- clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
- clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
- clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
- clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
- clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
- clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
- clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
- clk[ipu2_di1_pre] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
- clk[hsi_tx_podf] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
- clk[ssi1_pred] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
- clk[ssi1_podf] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
- clk[ssi2_pred] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
- clk[ssi2_podf] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
- clk[ssi3_pred] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
- clk[ssi3_podf] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
- clk[usdhc1_podf] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
- clk[usdhc2_podf] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
- clk[usdhc3_podf] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
- clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
- clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
- clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[emi_podf] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clk[emi_slow_podf] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
- clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
- clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
- clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
-
- /* name parent_name reg shift width busy: reg, shift */
- clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
- clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
- clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
- clk[arm] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
- clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
-
- /* name parent_name reg shift */
- clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
- clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
- clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
- clk[can2_ipg] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
- clk[can2_serial] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
- clk[ecspi1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
- clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
- clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
- clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ /* name reg shift width parent_names num_parents */
+ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clk[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clk[IMX6QDL_CLK_AXI_SEL] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
+ clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+ clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
+ clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[IMX6QDL_CLK_EMI_SEL] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EMI_SLOW_SEL] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
+ clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
+ clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clk[IMX6QDL_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clk[IMX6QDL_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clk[IMX6QDL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+
+ /* name parent_name reg shift width */
+ clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
+ clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
+ clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
+ clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
+ clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
+ clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
+ clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
+ clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
+ clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
+ clk[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
+ clk[IMX6QDL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clk[IMX6QDL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clk[IMX6QDL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
+ clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
+ clk[IMX6QDL_CLK_EMI_PODF] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EMI_SLOW_PODF] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
+ clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+
+ /* name parent_name reg shift width busy: reg, shift */
+ clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+
+ /* name parent_name reg shift */
+ clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
+ clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
+ clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clk[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
+ clk[IMX6QDL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clk[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clk[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clk[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
if (cpu_is_imx6dl())
- /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
- clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
+ clk[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
else
- clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
- clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
- clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
- clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
- clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
+ clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clk[IMX6QDL_CLK_ESAI] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_AHB] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
+ clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of imx6q clock gpu3d_shader get
* redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
*/
- clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
else
- clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
- clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
- clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
- clk[i2c1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
- clk[i2c2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
- clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
- clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
- clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
- clk[vdoa] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
- clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
- clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
- clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
- clk[ipu2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
- clk[ipu2_di0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
- clk[ldb_di0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
- clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
- clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
+ clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
+ clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
+ clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
+ clk[IMX6QDL_CLK_IIM] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
+ clk[IMX6QDL_CLK_ENFC] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[IMX6QDL_CLK_VDOA] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
+ clk[IMX6QDL_CLK_IPU1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
+ clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
+ clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
+ clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
+ clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get
* redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
*/
- clk[mlb] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
else
- clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
- clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
- clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
- clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
- clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
- clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
- clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
- clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
- clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
- clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
- clk[pwm4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
- clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
- clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
- clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
- clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
- clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
- clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
- clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
- clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clk[spdif] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
- clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
- clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
- clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
- clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
- clk[usdhc1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
- clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
- clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- clk[eim_slow] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
- clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
- clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
- clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
- clk[cko2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
-
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX6q clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
+ clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
+ clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
+ clk[IMX6QDL_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[IMX6QDL_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clk[IMX6QDL_CLK_PWM1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
+ clk[IMX6QDL_CLK_PWM2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
+ clk[IMX6QDL_CLK_PWM3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
+ clk[IMX6QDL_CLK_PWM4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
+ clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
+ clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
+ clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
+ clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
+ clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clk[IMX6QDL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
+ clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
+ clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
- clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
cpu_is_imx6dl()) {
- clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
}
- clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
- clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
- clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
- clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]);
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.
* So choose pll2_pfd2_396m as enfc_sel's parent.
*/
- clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+ clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
- clk_prepare_enable(clk[usbphy1_gate]);
- clk_prepare_enable(clk[usbphy2_gate]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
}
/*
* Let's initially set up CLKO with OSC24M, since this configuration
* is widely used by imx6q board designs to clock audio codec.
*/
- ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]);
if (!ret)
- ret = clk_set_parent(clk[cko], clk[cko2]);
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]);
if (ret)
pr_warn("failed to set up CLKO: %d\n", ret);
/* Audio-related clocks configuration */
- clk_set_parent(clk[spdif_sel], clk[pll3_pfd3_454m]);
+ clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
- clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+ clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 5408ca70c8d6..fef46faf692f 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -348,18 +348,12 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6SL clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
- clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
/* Ensure the AHB clk is at 132MHz. */
ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
if (ret)
@@ -383,8 +377,5 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
- mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
index 72f8902235d1..ecde72bdfe88 100644
--- a/arch/arm/mach-imx/clk-imx6sx.c
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -124,6 +124,9 @@ static struct clk_div_table video_div_table[] = {
static u32 share_count_asrc;
static u32 share_count_audio;
static u32 share_count_esai;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
@@ -409,12 +412,12 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
- clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
- clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
- clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
- clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
@@ -443,17 +446,12 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
/* mask handshake of mmdc */
writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
- clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
@@ -517,8 +515,5 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
- mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index 22dc3ee21fd4..f60d6d569ce3 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -295,14 +295,18 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));
- clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0));
- clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
+ clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
+ clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));
clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2);
clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2);
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index edc35df7bed4..df12b5307175 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -7,6 +7,16 @@
DEFINE_SPINLOCK(imx_ccm_lock);
+void __init imx_check_clocks(struct clk *clks[], unsigned int count)
+{
+ unsigned i;
+
+ for (i = 0; i < count; i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX clk %u: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+}
+
static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
{
struct of_phandle_args phandle;
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index e29f6ebe9f39..d5ba76fee115 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
extern spinlock_t imx_ccm_lock;
+void imx_check_clocks(struct clk *clks[], unsigned int count);
+
extern void imx_cscmr1_fixup(u32 *val);
struct clk *imx_clk_pllv1(const char *name, const char *parent,
@@ -95,6 +97,13 @@ static inline struct clk *imx_clk_gate(const char *name, const char *parent,
shift, 0, &imx_ccm_lock);
}
+static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
u8 shift, u8 width, const char **parents, int num_parents)
{
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9ab785ce13e8..22ba8973bcb9 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -19,6 +19,7 @@ struct pt_regs;
struct clk;
struct device_node;
enum mxc_cpu_pwr_mode;
+struct of_device_id;
void mx1_map_io(void);
void mx21_map_io(void);
@@ -26,48 +27,34 @@ void mx25_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
-void mx51_map_io(void);
-void mx53_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
-void imx51_init_early(void);
-void imx53_init_early(void);
void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void __iomem *);
+void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
-void mx51_init_irq(void);
-void mx53_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
-void imx51_soc_init(void);
-void imx51_init_late(void);
-void imx53_init_late(void);
void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
-void mxc_timer_init_dt(struct device_node *);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
-int mx51_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2);
-int mx25_clocks_init_dt(void);
-int mx27_clocks_init_dt(void);
int mx31_clocks_init_dt(void);
struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
@@ -75,8 +62,10 @@ void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
void mxc_arch_reset_init_dt(void);
+int mx51_revision(void);
int mx53_revision(void);
void imx_set_aips(void __iomem *);
+void imx_aips_allow_unprivileged_access(const char *compat);
int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
unsigned int imx_get_soc_revision(void);
@@ -117,7 +106,7 @@ static inline void imx_scu_standby_enable(void) {}
#endif
void imx_src_init(void);
void imx_gpc_init(void);
-void imx_gpc_pre_suspend(void);
+void imx_gpc_pre_suspend(bool arm_power_off);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
void imx_gpc_restore_all(void);
@@ -127,7 +116,7 @@ void imx_anatop_init(void);
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(void);
+void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
void imx_cpu_die(unsigned int cpu);
@@ -144,12 +133,17 @@ static inline void imx6_suspend(void __iomem *ocram_vbase) {}
void imx6q_pm_init(void);
void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
+void imx6sx_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
#ifdef CONFIG_PM
-void imx5_pm_init(void);
+void imx51_pm_init(void);
+void imx53_pm_init(void);
+void imx5_pm_set_ccm_base(void __iomem *base);
#else
-static inline void imx5_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_set_ccm_base(void __iomem *base) {}
#endif
#ifdef CONFIG_NEON
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index c1c99a72c6a1..3403bac94a31 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -16,6 +16,8 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "hardware.h"
#include "common.h"
@@ -24,10 +26,26 @@ static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
+static u32 imx5_read_srev_reg(const char *compat)
+{
+ void __iomem *iim_base;
+ struct device_node *np;
+ u32 srev;
+
+ np = of_find_compatible_node(NULL, NULL, compat);
+ iim_base = of_iomap(np, 0);
+ WARN_ON(!iim_base);
+
+ srev = readl(iim_base + IIM_SREV) & 0xff;
+
+ iounmap(iim_base);
+
+ return srev;
+}
+
static int get_mx51_srev(void)
{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+ u32 rev = imx5_read_srev_reg("fsl,imx51-iim");
switch (rev) {
case 0x0:
@@ -77,8 +95,7 @@ int __init mx51_neon_fixup(void)
static int get_mx53_srev(void)
{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+ u32 rev = imx5_read_srev_reg("fsl,imx53-iim");
switch (rev) {
case 0x0:
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index bbe8ff1f0412..df42c14ff749 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -60,6 +61,18 @@ void __init imx_set_aips(void __iomem *base)
__raw_writel(reg, base + 0x50);
}
+void __init imx_aips_allow_unprivileged_access(
+ const char *compat)
+{
+ void __iomem *aips_base_addr;
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, compat) {
+ aips_base_addr = of_iomap(np, 0);
+ imx_set_aips(aips_base_addr);
+ }
+}
+
struct device * __init imx_soc_device_init(void)
{
struct soc_device_attribute *soc_dev_attr;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 6bcae0479049..10844d3bb926 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -13,6 +13,7 @@
#include "common.h"
#include "cpuidle.h"
+#include "hardware.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
@@ -66,10 +67,11 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
int __init imx6q_cpuidle_init(void)
{
/* Need to enable SCU standby for entering WAIT modes */
- imx_scu_standby_enable();
+ if (!cpu_is_imx6sx())
+ imx_scu_standby_enable();
/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
- imx6q_set_int_mem_clk_lpm();
+ imx6q_set_int_mem_clk_lpm(true);
return cpuidle_register(&imx6q_cpuidle_driver, NULL);
}
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
deleted file mode 100644
index 5e3f1f0f4cab..000000000000
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-
-#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
-#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
-#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
-#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
-#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
-#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
-
-/*MX53*/
-#define MX53_CCM_BASE MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
-#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
-#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
-#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_MFNMINUS 0x14
-#define MXC_PLL_DP_MFNPLUS 0x18
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-#define MXC_PLL_DP_MFN_TOGC 0x28
-#define MXC_PLL_DP_DESTAT 0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_CONFIG_BIST 0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
-#define MXC_PLL_DP_CONFIG_AREN 0x2
-#define MXC_PLL_DP_CONFIG_LDREQ 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0x0
-#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
-
-/* Register addresses of CCM*/
-#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
-#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
-#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
-#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
-#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
-#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
-#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
-#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
-#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
-#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
-#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
-#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
-#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
-#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
-#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
-#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
-#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
-#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
-#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
-#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
-#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
-#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
-#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
-#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
-#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
-#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
-#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
-#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
-#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
-#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
-#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
-#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
-#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
-#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84)
-
-#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
-
-/* Define the bits in register CCR */
-#define MXC_CCM_CCR_COSC_EN (1 << 12)
-#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
-#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
-#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
-#define MXC_CCM_CCR_FPM_EN (1 << 8)
-#define MXC_CCM_CCR_OSCNT_OFFSET (0)
-#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
-
-/* Define the bits in register CCDR */
-#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
-#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
-#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
-
-/* Define the bits in register CSR */
-#define MXC_CCM_CSR_COSR_READY (1 << 5)
-#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
-#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
-#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
-#define MXC_CCM_CSR_FPM_READY (1 << 1)
-#define MXC_CCM_CSR_REF_EN_B (1 << 0)
-
-/* Define the bits in register CCSR */
-#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
-#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
-#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
-#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
-#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
-#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
-#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
-#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
-#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
-#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
-#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
-#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
- 1: step_clk */
-#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
-#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
-
-/* Define the bits in register CACRR */
-#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
-#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
-
-/* Define the bits in register CBCDR */
-#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
-#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
-#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
-#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
-#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
-#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
-#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
-#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
-#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
-#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
-#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
-#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
-#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
-#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
-#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
-#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
-#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
-#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
-
-/* Define the bits in register CBCMR */
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
-
-/* Define the bits in register CSCMR1 */
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
-#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
-#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
-
-/* Define the bits in register CSCMR2 */
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
-#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
-#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
-
-/* Define the bits in register CSCDR1 */
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CS1CDR and CS2CDR */
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
-
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDCDR */
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
-
-/* Define the bits in register CHSCCDR */
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CSCDR2 */
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR3 */
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR4 */
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDHIPR */
-#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
-#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
-#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
-#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
-#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
-#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
-#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
-#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
-#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
-#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
-
-/* Define the bits in register CDCR */
-#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
-
-/* Define the bits in register CLPCR */
-#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
-#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
-#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
-#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 25)
-#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
-#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
-#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
-#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
-#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
-#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
-#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
-#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
-#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
-#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
-#define MXC_CCM_CLPCR_LPM_OFFSET (0)
-#define MXC_CCM_CLPCR_LPM_MASK (0x3)
-
-/* Define the bits in register CISR */
-#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
-#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
-#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
-#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CISR_LRF_PLL1 (0x1)
-
-/* Define the bits in register CIMR */
-#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
-#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
-#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
-
-/* Define the bits in register CCOSR */
-#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
-#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
-#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
-#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
-#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
-#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
-#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
-#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
-#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
-#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
-
-/* Define the bits in registers CGPR */
-#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
-#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
-
-/* Define the bits in registers CCGRx */
-#define MXC_CCM_CCGRx_CG_MASK 0x3
-#define MXC_CCM_CCGRx_MOD_OFF 0x0
-#define MXC_CCM_CCGRx_MOD_ON 0x3
-#define MXC_CCM_CCGRx_MOD_IDLE 0x1
-
-#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
-#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
-#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
-#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
-#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
-#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
-#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
-#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
-#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
-#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
-#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
-#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
-#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
-#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
-
-#define MXC_CCM_CCGRx_CG15_OFFSET 30
-#define MXC_CCM_CCGRx_CG14_OFFSET 28
-#define MXC_CCM_CCGRx_CG13_OFFSET 26
-#define MXC_CCM_CCGRx_CG12_OFFSET 24
-#define MXC_CCM_CCGRx_CG11_OFFSET 22
-#define MXC_CCM_CCGRx_CG10_OFFSET 20
-#define MXC_CCM_CCGRx_CG9_OFFSET 18
-#define MXC_CCM_CCGRx_CG8_OFFSET 16
-#define MXC_CCM_CCGRx_CG7_OFFSET 14
-#define MXC_CCM_CCGRx_CG6_OFFSET 12
-#define MXC_CCM_CCGRx_CG5_OFFSET 10
-#define MXC_CCM_CCGRx_CG4_OFFSET 8
-#define MXC_CCM_CCGRx_CG3_OFFSET 6
-#define MXC_CCM_CCGRx_CG2_OFFSET 4
-#define MXC_CCM_CCGRx_CG1_OFFSET 2
-#define MXC_CCM_CCGRx_CG0_OFFSET 0
-
-#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
-#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
-#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
-#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
-#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
-#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
-#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
-#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
-#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
-#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
-#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
-#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
-#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
-
-/* CORTEXA8 platform */
-#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
-#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
-#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
-#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
-#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
-#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
-#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
-#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
-#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
-
-/* DVFS CORE */
-#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
-#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
-#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
-#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
-#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
-#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
-#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
-#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
-#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
-#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
-#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
-#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
-#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
-#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
-#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
-#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
-#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
-
-/* GPC */
-#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
-#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
-#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
-#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
-#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
-#define MXC_GPC_PGR_ARMPG_OFFSET 8
-#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
-
-/* PGC */
-#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
-#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
-#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
-#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
-#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
-#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
-
-#define MXC_PGCR_PCR 1
-#define MXC_SRPGCR_PCR 1
-#define MXC_EMPGCR_PCR 1
-#define MXC_PGSR_PSR 1
-
-
-#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
-#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
-
-/* SRPG */
-#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
-#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
-#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
-
-#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
-#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
-#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
-#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
-#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
-#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
-#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
-
-#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
-#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
-#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
-
-#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
-#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
-#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
-
-#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
deleted file mode 100644
index 26389f35a2b2..000000000000
--- a/arch/arm/mach-imx/devices-imx51.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata) \
- imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata) \
- imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata) \
- imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id) \
- imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
- imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 2d260a5a307c..1d2cc1805f3e 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -1,6 +1,6 @@
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+ default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
config IMX_HAVE_PLATFORM_FLEXCAN
bool
@@ -10,7 +10,6 @@ config IMX_HAVE_PLATFORM_FSL_USB2_UDC
config IMX_HAVE_PLATFORM_GPIO_KEYS
bool
- default y if SOC_IMX51
config IMX_HAVE_PLATFORM_IMX21_HCD
bool
@@ -43,15 +42,9 @@ config IMX_HAVE_PLATFORM_IMX_SSI
config IMX_HAVE_PLATFORM_IMX_UART
bool
-config IMX_HAVE_PLATFORM_IMX_UDC
- bool
-
config IMX_HAVE_PLATFORM_IPU_CORE
bool
-config IMX_HAVE_PLATFORM_MX1_CAMERA
- bool
-
config IMX_HAVE_PLATFORM_MX2_CAMERA
bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 1cbc14cd80d1..8fdb12b4ca7e 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -16,9 +16,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 61352a80bb59..67f7fb13050d 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -176,22 +176,6 @@ struct platform_device *__init imx_add_imx_uart_1irq(
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
-#include <linux/platform_data/usb-imx_udc.h>
-struct imx_imx_udc_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq0;
- resource_size_t irq1;
- resource_size_t irq2;
- resource_size_t irq3;
- resource_size_t irq4;
- resource_size_t irq5;
- resource_size_t irq6;
-};
-struct platform_device *__init imx_add_imx_udc(
- const struct imx_imx_udc_data *data,
- const struct imxusb_platform_data *pdata);
-
#include <linux/platform_data/video-mx3fb.h>
#include <linux/platform_data/camera-mx3.h>
struct imx_ipu_core_data {
@@ -208,16 +192,6 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
-#include <linux/platform_data/camera-mx1.h>
-struct imx_mx1_camera_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx1_camera(
- const struct imx_mx1_camera_data *data,
- const struct mx1_camera_pdata *pdata);
-
#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
const char *devid;
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 63eba08f87b1..d86f9250b4ee 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -35,18 +35,6 @@ const struct imx_fec_data imx35_fec_data __initconst =
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx27 type fec */
-const struct imx_fec_data imx51_fec_data __initconst =
- imx_fec_data_entry_single(MX51, "imx27-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx25 type fec */
-const struct imx_fec_data imx53_fec_data __initconst =
- imx_fec_data_entry_single(MX53, "imx25-fec");
-#endif
-
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 3c06bd96e9cc..23b0061347cb 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -38,11 +38,6 @@ const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
-#endif
-
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 57d342e85c2f..644ac2689882 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -70,32 +70,6 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
-#define imx51_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
- imx51_imx_i2c_data_entry(0, 1),
- imx51_imx_i2c_data_entry(1, 2),
- {
- .devid = "imx21-i2c",
- .id = 2,
- .iobase = MX51_HSI2C_DMA_BASE_ADDR,
- .iosize = SZ_16K,
- .irq = MX51_INT_HS_I2C,
- },
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
-#define imx53_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
- imx53_imx_i2c_data_entry(0, 1),
- imx53_imx_i2c_data_entry(1, 2),
- imx53_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
index 8f22a4c98a4c..f42200b7aca9 100644
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c
@@ -41,16 +41,6 @@ const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX51, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX53, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
index bfcb8f3dfa8d..1c7c721ebff1 100644
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c
@@ -66,26 +66,6 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
-#define imx51_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
- imx51_imx_ssi_data_entry(0, 1),
- imx51_imx_ssi_data_entry(1, 2),
- imx51_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
-#define imx53_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
- imx53_imx_ssi_data_entry(0, 1),
- imx53_imx_ssi_data_entry(1, 2),
- imx53_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index faac4aa6ca6d..8c01836bc1d4 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -94,28 +94,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
-#define imx51_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
- imx51_imx_uart_data_entry(0, 1),
- imx51_imx_uart_data_entry(1, 2),
- imx51_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
-#define imx53_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
- imx53_imx_uart_data_entry(0, 1),
- imx53_imx_uart_data_entry(1, 2),
- imx53_imx_uart_data_entry(2, 3),
- imx53_imx_uart_data_entry(3, 4),
- imx53_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_uart_3irq(
const struct imx_imx_uart_3irq_data *data,
const struct imxuart_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
index ec75d6413686..54f63bc25ca4 100644
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
@@ -45,24 +45,6 @@ const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
-#define imx51_imx2_wdt_data_entry(_id, _hwid) \
- imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
- imx51_imx2_wdt_data_entry(0, 1),
- imx51_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
-#define imx53_imx2_wdt_data_entry(_id, _hwid) \
- imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
- imx53_imx2_wdt_data_entry(0, 1),
- imx53_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data)
{
diff --git a/arch/arm/mach-imx/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c
deleted file mode 100644
index 5ced7e4e2c71..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx_udc.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_udc_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _USBD_BASE_ADDR, \
- .iosize = _size, \
- .irq0 = soc ## _INT_USBD0, \
- .irq1 = soc ## _INT_USBD1, \
- .irq2 = soc ## _INT_USBD2, \
- .irq3 = soc ## _INT_USBD3, \
- .irq4 = soc ## _INT_USBD4, \
- .irq5 = soc ## _INT_USBD5, \
- .irq6 = soc ## _INT_USBD6, \
- }
-
-#define imx_imx_udc_data_entry(soc, _size) \
- [_id] = imx_imx_udc_data_entry_single(soc, _size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
- imx_imx_udc_data_entry_single(MX1, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_imx_udc(
- const struct imx_imx_udc_data *data,
- const struct imxusb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq0,
- .end = data->irq0,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq1,
- .end = data->irq1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq2,
- .end = data->irq2,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq3,
- .end = data->irq3,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq4,
- .end = data->irq4,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq5,
- .end = data->irq5,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq6,
- .end = data->irq6,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imx_udc", 0,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c
deleted file mode 100644
index 2c6788131080..000000000000
--- a/arch/arm/mach-imx/devices/platform-mx1-camera.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx1_camera_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _CSI ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CSI, \
- }
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
- imx_mx1_camera_data_entry_single(MX1, 10);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_mx1_camera(
- const struct imx_mx1_camera_data *data,
- const struct mx1_camera_pdata *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("mx1-camera", 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
index 5d4bbbfde641..296353662ff0 100644
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
@@ -50,15 +50,6 @@ const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
-const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
index 7af1c53e42b5..fa618a34f462 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c
@@ -54,11 +54,6 @@ const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
- imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
-#endif
-
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
index c58404badb59..851fbc8af7a9 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_rnga.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
@@ -48,9 +48,6 @@ static int __init imxXX_add_mxc_rnga(void)
#endif /* if defined(CONFIG_SOC_IMX31) */
ret = ERR_PTR(-ENODEV);
- if (IS_ERR(ret))
- return PTR_ERR(ret);
-
- return 0;
+ return PTR_ERR_OR_ZERO(ret);
}
arch_initcall(imxXX_add_mxc_rnga);
diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
index e4ec11c8ce55..1c7f895a69d2 100644
--- a/arch/arm/mach-imx/devices/platform-pata_imx.c
+++ b/arch/arm/mach-imx/devices/platform-pata_imx.c
@@ -28,16 +28,6 @@ const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX35, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX51, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX53, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data)
{
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index e66a4e316311..fb8d4a2ad48c 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -43,30 +43,6 @@ imx35_sdhci_esdhc_imx_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst = {
-#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
- imx51_sdhci_esdhc_imx_data_entry(0, 1),
- imx51_sdhci_esdhc_imx_data_entry(1, 2),
- imx51_sdhci_esdhc_imx_data_entry(2, 3),
- imx51_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst = {
-#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
- imx53_sdhci_esdhc_imx_data_entry(0, 1),
- imx53_sdhci_esdhc_imx_data_entry(1, 2),
- imx53_sdhci_esdhc_imx_data_entry(2, 3),
- imx53_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
.wp_type = ESDHC_WP_NONE,
.cd_type = ESDHC_CD_NONE,
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index 8880bcb11e05..aca825d74c48 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -79,33 +79,6 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx51_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
-#define imx51_ecspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
- imx51_ecspi_data_entry(0, 1),
- imx51_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx53_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-/* i.mx53 has the i.mx51 type ecspi */
-const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
-#define imx53_ecspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
- imx53_ecspi_data_entry(0, 1),
- imx53_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata)
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 134c190e3003..42a5a3d14c5f 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
index 448d9115539d..c56974346c16 100644
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
index 05de4e1e39d7..bede21d9b981 100644
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 554e7cccff53..f424a543755c 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
deleted file mode 100644
index e49710b10c68..000000000000
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "hardware.h"
-
-#define MXC_OTG_OFFSET 0
-#define MXC_H1_OFFSET 0x200
-#define MXC_H2_OFFSET 0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */
-#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
-#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
-
-#define MXC_USBCMD_OFFSET 0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
- void __iomem *usb_base;
- void __iomem *usbotg_base;
- void __iomem *usbother_base;
- int ret = 0;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base) {
- printk(KERN_ERR "%s(): ioremap failed\n", __func__);
- return -ENOMEM;
- }
-
- switch (port) {
- case 0: /* OTG port */
- usbotg_base = usb_base + MXC_OTG_OFFSET;
- break;
- case 1: /* Host 1 port */
- usbotg_base = usb_base + MXC_H1_OFFSET;
- break;
- case 2: /* Host 2 port */
- usbotg_base = usb_base + MXC_H2_OFFSET;
- break;
- default:
- printk(KERN_ERR"%s no such port %d\n", __func__, port);
- ret = -ENOENT;
- goto error;
- }
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- switch (port) {
- case 0: /*OTG port */
- if (flags & MXC_EHCI_INTERNAL_PHY) {
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
- v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
- else
- v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
- /* OC/USBPWR is used */
- v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
- } else {
- /* OC/USBPWR is not used */
- v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
- }
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
- else
- v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED)
- v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
- else
- v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_OTG_UCTRL_OPM_BIT;
- else
- v |= MXC_OTG_UCTRL_OPM_BIT;
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
- }
- break;
- case 1: /* Host 1 */
- /*Host ULPI */
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
- else
- v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
- if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
- v |= MXC_H1_OC_POL_BIT;
- else
- v &= ~MXC_H1_OC_POL_BIT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
- else
- v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
- if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
- /* Interrupt Threshold Control:Immediate (no threshold) */
- v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
- __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
- break;
- case 2: /* Host 2 ULPI */
- v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
- else
- v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
- break;
- }
-
-error:
- iounmap(usb_base);
- return ret;
-}
-
diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h
new file mode 100644
index 000000000000..0e060023db8b
--- /dev/null
+++ b/arch/arm/mach-imx/ehci.h
@@ -0,0 +1,43 @@
+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
+#define MXC_EHCI_TTL_ENABLED (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN (1 << 10)
+#define MXC_EHCI_IPPUE_UP (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
+
+#define MXC_USBCTRL_OFFSET 0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
+#define MXC_USBH2CTRL_OFFSET 0x14
+
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 586e0171a652..82ea74e68482 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -27,13 +27,14 @@ static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
-void imx_gpc_pre_suspend(void)
+void imx_gpc_pre_suspend(bool arm_power_off)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Tell GPC to power off ARM core when suspend */
- writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+ if (arm_power_off)
+ writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index abf43bb47eca..66b2b564c463 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -105,8 +105,6 @@
#include "mxc.h"
-#include "mx51.h"
-#include "mx53.h"
#include "mx3x.h"
#include "mx31.h"
#include "mx35.h"
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 42a65e067443..cf8032bae277 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -29,16 +29,10 @@ static const char * const imx25_dt_board_compat[] __initconst = {
NULL
};
-static void __init imx25_timer_init(void)
-{
- mx25_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 17bd4058133d..080e66c6a1d0 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -34,16 +34,10 @@ static const char * const imx27_dt_board_compat[] __initconst = {
NULL
};
-static void __init imx27_timer_init(void)
-{
- mx27_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .init_time = imx27_timer_init,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index 581f4d6c9b8a..418dbc82adc4 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -25,7 +25,7 @@ static void __init imx31_dt_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *imx31_dt_board_compat[] __initconst = {
+static const char * const imx31_dt_board_compat[] __initconst = {
"fsl,imx31",
NULL
};
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index a62854c59240..584fbe105579 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -34,7 +34,7 @@ static void __init imx35_irq_init(void)
mx35_init_irq();
}
-static const char *imx35_dt_board_compat[] __initconst = {
+static const char * const imx35_dt_board_compat[] __initconst = {
"fsl,imx35",
NULL
};
diff --git a/arch/arm/mach-imx/iomux-mx51.h b/arch/arm/mach-imx/iomux-mx51.h
deleted file mode 100644
index 75bbcc4aa2d2..000000000000
--- a/arch/arm/mach-imx/iomux-mx51.h
+++ /dev/null
@@ -1,827 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX51_H__
-#define __MACH_IOMUX_MX51_H__
-
-#include "iomux-v3.h"
-#define __NA_ 0x000
-
-
-/* Pad control groupings */
-#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_HYS | PAD_CTL_SRE_FAST)
-#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS)
-#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS | PAD_CTL_PUE)
-#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
- PAD_CTL_SRE_FAST | PAD_CTL_DVS)
-#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
-
-#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
-
-/*
- * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
- * See also iomux-v3.h
- */
-
-/* Raw pin modes without pad control */
-/* PAD MUX ALT INPSE PATH PADCTRL */
-
-/* The same pins as above but with the default pad control values applied */
-#define MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x05c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x05c, 7, 0x8d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x05c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, 0x14, 0x9b4, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x05c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x060, 7, 0x8d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x060, 3, 0x9ec, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x060, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x064, 7, 0x8e4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x064, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x064, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x064, 4, 0x9f0, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x068, 7, 0x8e8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x068, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, 0x14, 0x9b0, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x068, 3, 0x9e8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x06c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x06c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x06c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x06c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x070, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x074, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x074, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x078, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x078, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x078, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x07c, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x07c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x07c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x07c, 0x14, 0x9bc, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x07c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x080, 1, 0x9c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__GPT_CMPOUT1 IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__GPT_CMPOUT2 IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x088, 0x14, 0x9b8, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x08c, 5, 0x8f0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x08c, 1, 0x9d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x08c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x090, 5, 0x8ec, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x090, 1, 0x9d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x094, 5, 0x8fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x094, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x094, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x098, 5, 0x900, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x098, 1, 0x9dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x098, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x09c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x09c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0x0a0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0x0a4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0x0a4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0x0a8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0x0a8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0x0ac, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0x0b0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0x0b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0x0b8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0x0b8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0x0bc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0x0c0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0x0c0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0x0c4, 5, 0x9a0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0x0c4, 6, 0x908, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0x0c8, 5, 0x99c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0x0c8, 6, 0x9a4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0x0d4, 6, 0x8e0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0x0d4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__FEC_MDIO (IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, 0) | \
- MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
-#define MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0x0d4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0x0d4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0x0d8, 6, 0x8dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0x0d8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0x0d8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0x0dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0x0dc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0x0e4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0x0e8, 6, 0x8d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0x0e8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0x0e8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0x0ec, 6, 0x8d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0x0ec, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0x0ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0x0f0, 6, 0x8e4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0x0f0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0x0f0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0x0f4, 6, 0x8e8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0x0f4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0x0f4, 4, 0x904, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0x0f4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0x0f4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0x0f8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0x0fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0x0fc, 1, 0x978, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__CCM_CLKO IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x93c, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x984, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x940, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x988, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x98c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x990, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x944, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x930, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x994, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x91c, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2 IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3 IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x914, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0xa24, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0xa1c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x928, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x934, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x930, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x948, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x9fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0xa00, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0xa04, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0xa08, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0xa0c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0xa10, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0xa14, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0xa18, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x998, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x9f4, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x9b4, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x8c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x8cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x8c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x8d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x9b0, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x90c, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x910, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x9b8, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x9f0, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x9bc, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x914, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x9b8, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x91c, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x9bc, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x9f4, 6, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x918, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x9ec, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x9e8, 5, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x920, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x928, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x934, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x9c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x9c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x990, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x994, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN15__DI1_PIN15 IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x9c0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x99c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x950, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x954, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x9c0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x964, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x9c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x9f4, 8, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x9f8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x970, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x9cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0xa1c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x94c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x9dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0xa04, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x96c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0xa0c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x8fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0xa10, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x900, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0xa14, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x8f8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0xa18, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x91c, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x914, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x8d8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x918, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(__NA_, 0x01c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(__NA_, 0x020, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(__NA_, 0x024, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(__NA_, 0x028, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x8d4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(__NA_, 0x02c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(__NA_, 0x030, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(__NA_, 0x034, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(__NA_, 0x038, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x8e4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(__NA_, 0x044, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(__NA_, 0x048, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(__NA_, 0x03c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(__NA_, 0x040, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x8e8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x9b4, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x918, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__CCM_CLKO2 IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPT_CLKIN IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPT_CAPIN1 IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CCM_CLKO IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPT_CAPIN2 IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CCM_CLKO2 IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_CLKO IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 39406b7e3228..a7e9bd26a552 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -50,6 +50,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 75b7b6aa2720..e6d4b9929571 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx27.h"
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 1ffa27169045..62a6e02f4763 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index e978dda1434c..b2ee6e009fe4 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index b61bd8ed5568..ede2bdbb5dd5 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -43,6 +43,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
deleted file mode 100644
index bb3ca0429680..000000000000
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "iomux-mx27.h"
-
-static const int mx27ipcam_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static void __init mx27ipcam_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
- "mx27ipcam");
-
- imx27_add_imx_uart0(NULL);
- imx27_add_fec(NULL);
- imx27_add_imx2_wdt();
-}
-
-static void __init mx27ipcam_timer_init(void)
-{
- mx27_clocks_init(25000000);
-}
-
-MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27ipcam_timer_init,
- .init_machine = mx27ipcam_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
deleted file mode 100644
index 9992089d3ad1..000000000000
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mx27lite_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27lite_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
- "imx27lite");
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_fec(NULL);
-}
-
-static void __init mx27lite_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27lite_timer_init,
- .init_machine = mx27lite_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index b899c0b59afd..b1e56a94a382 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -23,14 +23,13 @@ static void __init imx50_dt_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *imx50_dt_board_compat[] __initconst = {
+static const char * const imx50_dt_board_compat[] __initconst = {
"fsl,imx50",
NULL
};
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
- .map_io = mx53_map_io,
- .init_irq = mx53_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx50_dt_init,
.dt_compat = imx50_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/mach-imx51.c
index b8cd968faa52..c77deb3f0893 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -10,6 +10,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -17,27 +18,63 @@
#include <asm/mach/time.h>
#include "common.h"
-#include "mx51.h"
+#include "hardware.h"
+
+static void __init imx51_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX51);
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured for proper
+ * IPU support.
+ */
+#define MX51_MIPI_HSC_BASE 0x83fdc000
+static void __init imx51_ipu_mipi_setup(void)
+{
+ void __iomem *hsc_addr;
+
+ hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
+ WARN_ON(!hsc_addr);
+
+ /* setup MIPI module to legacy mode */
+ __raw_writel(0xf00, hsc_addr);
+
+ /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+ __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+ hsc_addr + 0x800);
+
+ iounmap(hsc_addr);
+}
static void __init imx51_dt_init(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
mxc_arch_reset_init_dt();
+ imx51_ipu_mipi_setup();
+ imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_full(&devinfo);
}
-static const char *imx51_dt_board_compat[] __initconst = {
+static void __init imx51_init_late(void)
+{
+ mx51_neon_fixup();
+ imx51_pm_init();
+}
+
+static const char * const imx51_dt_board_compat[] __initconst = {
"fsl,imx51",
NULL
};
DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
- .map_io = mx51_map_io,
.init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 2bad387956c0..03dd6ea13acc 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -22,24 +22,35 @@
#include "common.h"
#include "hardware.h"
-#include "mx53.h"
+
+static void __init imx53_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX53);
+}
static void __init imx53_dt_init(void)
{
mxc_arch_reset_init_dt();
+ imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
+}
+
+static void __init imx53_init_late(void)
+{
+ imx53_pm_init();
}
-static const char *imx53_dt_board_compat[] __initconst = {
+static const char * const imx53_dt_board_compat[] __initconst = {
"fsl,imx53",
NULL
};
DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
- .map_io = mx53_map_io,
.init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index e60456d85c9d..d51c6e99a2e9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -320,7 +320,7 @@ static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
- if (val != OCOTP_CFG3_SPEED_1P2GHZ)
+ if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q())
if (dev_pm_opp_disable(cpu_dev, 1200000000))
pr_warn("failed to disable 1.2 GHz OPP\n");
if (val < OCOTP_CFG3_SPEED_996MHZ)
@@ -396,7 +396,7 @@ static void __init imx6q_init_irq(void)
irqchip_init();
}
-static const char *imx6q_dt_compat[] __initconst = {
+static const char * const imx6q_dt_compat[] __initconst = {
"fsl,imx6dl",
"fsl,imx6q",
NULL,
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index ad323385115c..ed263a21d928 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -70,7 +70,7 @@ static void __init imx6sl_init_irq(void)
irqchip_init();
}
-static const char *imx6sl_dt_compat[] __initconst = {
+static const char * const imx6sl_dt_compat[] __initconst = {
"fsl,imx6sl",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 02fccf6033ac..673a734165ba 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -12,6 +12,7 @@
#include <asm/mach/map.h>
#include "common.h"
+#include "cpuidle.h"
static void __init imx6sx_init_machine(void)
{
@@ -26,6 +27,7 @@ static void __init imx6sx_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
+ imx6sx_pm_init();
}
static void __init imx6sx_init_irq(void)
@@ -37,7 +39,12 @@ static void __init imx6sx_init_irq(void)
irqchip_init();
}
-static const char *imx6sx_dt_compat[] __initconst = {
+static void __init imx6sx_init_late(void)
+{
+ imx6q_cpuidle_init();
+}
+
+static const char * const imx6sx_dt_compat[] __initconst = {
"fsl,imx6sx",
NULL,
};
@@ -47,5 +54,6 @@ DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
.init_irq = imx6sx_init_irq,
.init_machine = imx6sx_init_machine,
.dt_compat = imx6sx_dt_compat,
+ .init_late = imx6sx_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index ea1fa199c148..0d01e367b062 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 435a5428a678..9ef4640f3660 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 4217871a9653..453f41a2c5a9 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index eee042fa2768..e9549a3c0223 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -45,6 +45,7 @@
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index fa15d0b6118d..57eac6f45fab 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -42,6 +42,7 @@
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 08730f238449..bb6f8a52a6b8 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -47,6 +47,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -434,10 +435,8 @@ static int __init moboard_usbh2_init(void)
return -ENODEV;
pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
static const struct gpio_led mx31moboard_leds[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 4e8b184d773b..72cd77d21f63 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -50,6 +50,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 12212378c672..2d1c50bd8bdf 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 81b8affb9448..8eb1570f7851 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -45,6 +45,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 6c56fb5553c7..ee862ad6b6fc 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -36,6 +36,7 @@
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index c62b5d261345..b623bcaca76c 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index c44602758120..ee7e57b752a7 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -20,7 +20,7 @@ static void __init vf610_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *vf610_dt_compat[] __initconst = {
+static const char * const vf610_dt_compat[] __initconst = {
"fsl,vf610",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 872b3c6ba408..97836e94451c 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -34,6 +34,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
deleted file mode 100644
index 4c112021aa4e..000000000000
--- a/arch/arm/mach-imx/mm-imx5.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/of_address.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
- imx_map_entry(MX51, TZIC, MT_DEVICE),
- imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, AIPS1, MT_DEVICE),
- imx_map_entry(MX51, SPBA0, MT_DEVICE),
- imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
- imx_map_entry(MX53, TZIC, MT_DEVICE),
- imx_map_entry(MX53, AIPS1, MT_DEVICE),
- imx_map_entry(MX53, SPBA0, MT_DEVICE),
- imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx51_map_io(void)
-{
- iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
- iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-
-/*
- * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
- * the Freescale marketing division. However this did not remove the
- * hardware from the chip which still needs to be configured for proper
- * IPU support.
- */
-static void __init imx51_ipu_mipi_setup(void)
-{
- void __iomem *hsc_addr;
- hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR);
-
- /* setup MIPI module to legacy mode */
- __raw_writel(0xf00, hsc_addr);
-
- /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
- __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
- hsc_addr + 0x800);
-}
-
-void __init imx51_init_early(void)
-{
- imx51_ipu_mipi_setup();
- mxc_set_cpu_type(MXC_CPU_MX51);
- mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
- imx_src_init();
-}
-
-void __init imx53_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX53);
- imx_src_init();
-}
-
-void __init mx51_init_irq(void)
-{
- tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
-}
-
-void __init mx53_init_irq(void)
-{
- struct device_node *np;
- void __iomem *base;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- tzic_init_irq(base);
-}
-
-static struct sdma_platform_data imx51_sdma_pdata __initdata = {
- .fw_name = "sdma-imx51.bin",
-};
-
-static const struct resource imx51_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx51_soc_init(void)
-{
- mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx51 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
-
- pinctrl_provide_dummies();
-
- /* i.mx51 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
- imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));
-
- /* i.mx51 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
- ARRAY_SIZE(imx51_audmux_res));
-}
-
-void __init imx51_init_late(void)
-{
- mx51_neon_fixup();
- imx5_pm_init();
-}
-
-void __init imx53_init_late(void)
-{
- imx5_pm_init();
-}
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
deleted file mode 100644
index fb38436ca67f..000000000000
--- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Exported ksyms of ARCH_MX1
- *
- * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-
-#include <linux/platform_data/camera-mx1.h>
-
-/* IMX camera FIQ handler */
-EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
-EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
deleted file mode 100644
index 9c69aa65bf17..000000000000
--- a/arch/arm/mach-imx/mx1-camera-fiq.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on linux/arch/arm/lib/floppydma.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
- .text
- .global mx1_camera_sof_fiq_end
- .global mx1_camera_sof_fiq_start
-mx1_camera_sof_fiq_start:
- @ enable dma
- ldr r12, [r9]
- orr r12, r12, #0x00000001
- str r12, [r9]
- @ unmask DMA interrupt
- ldr r12, [r8]
- bic r12, r12, r13
- str r12, [r8]
- @ disable SOF interrupt
- ldr r12, [r10]
- bic r12, r12, #0x00010000
- str r12, [r10]
- @ clear SOF flag
- mov r12, #0x00010000
- str r12, [r11]
- @ return from FIQ
- subs pc, lr, #4
-mx1_camera_sof_fiq_end:
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index 52d5b1574721..1e91a0918e83 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -24,6 +24,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -213,10 +214,8 @@ static int __init devboard_usbh1_init(void)
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index a4f43e90f3c1..2e895a82a6eb 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -28,6 +28,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -327,10 +328,8 @@ static int __init marxbot_usbh1_init(void)
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
index 04ae45dbfaa7..89fc35a64448 100644
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -28,6 +28,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -141,10 +142,8 @@ static int __init smartbot_otg_host_init(void)
return -ENODEV;
pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }
diff --git a/arch/arm/mach-imx/mx51.h b/arch/arm/mach-imx/mx51.h
deleted file mode 100644
index af844f76261a..000000000000
--- a/arch/arm/mach-imx/mx51.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef __MACH_MX51_H__
-#define __MACH_MX51_H__
-
-/*
- * IROM
- */
-#define MX51_IROM_BASE_ADDR 0x0
-#define MX51_IROM_SIZE SZ_64K
-
-/*
- * IRAM
- */
-#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
-#define MX51_IRAM_PARTITIONS 16
-#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-#define MX51_GPU_BASE_ADDR 0x20000000
-#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-
-/*
- * SPBA global module enabled #0
- */
-#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_SPBA0_SIZE SZ_1M
-
-#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
-#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000)
-#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000)
-#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
-#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000)
-#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000)
-#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000)
-#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000)
-#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000)
-#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000)
-#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000)
-#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000)
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR 0x73f00000
-#define MX51_AIPS1_SIZE SZ_1M
-
-#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
-#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
-#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
-#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
-#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
-#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
-#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
-#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000)
-#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000)
-#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
-#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000)
-#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000)
-#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000)
-#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000)
-#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000)
-#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000)
-#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000)
-#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000)
-#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000)
-#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000)
-#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000)
-#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000)
-#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000)
-
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR 0x83f00000
-#define MX51_AIPS2_SIZE SZ_1M
-
-#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
-#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000)
-#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000)
-#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000)
-#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000)
-#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000)
-#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000)
-#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000)
-#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000)
-#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
-#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000)
-#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000)
-#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000)
-#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000)
-#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
-#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000)
-#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000)
-#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000)
-#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000)
-#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000)
-#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000)
-#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000)
-#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000)
-#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00)
-#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000)
-#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000)
-#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000)
-#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
-#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000)
-#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000)
-#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000)
-#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000)
-
-#define MX51_CSD0_BASE_ADDR 0x90000000
-#define MX51_CSD1_BASE_ADDR 0xa0000000
-#define MX51_CS0_BASE_ADDR 0xb0000000
-#define MX51_CS1_BASE_ADDR 0xb8000000
-#define MX51_CS2_BASE_ADDR 0xc0000000
-#define MX51_CS3_BASE_ADDR 0xc8000000
-#define MX51_CS4_BASE_ADDR 0xcc000000
-#define MX51_CS5_BASE_ADDR 0xce000000
-
-/*
- * NFC
- */
-#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE SZ_64K
-
-#define MX51_GPU2D_BASE_ADDR 0xd0000000
-#define MX51_TZIC_BASE_ADDR 0xe0000000
-#define MX51_TZIC_SIZE SZ_16K
-
-#define MX51_IO_P2V(x) IMX_IO_P2V(x)
-#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX51_SPBA_SDHC1 0x04
-#define MX51_SPBA_SDHC2 0x08
-#define MX51_SPBA_UART3 0x0c
-#define MX51_SPBA_CSPI1 0x10
-#define MX51_SPBA_SSI2 0x14
-#define MX51_SPBA_SDHC3 0x20
-#define MX51_SPBA_SDHC4 0x24
-#define MX51_SPBA_SPDIF 0x28
-#define MX51_SPBA_ATA 0x30
-#define MX51_SPBA_SLIM 0x34
-#define MX51_SPBA_HSI2C 0x38
-#define MX51_SPBA_CTRL 0x3c
-
-/*
- * Defines for modules using static and dynamic DMA channels
- */
-#define MX51_MXC_DMA_CHANNEL_IRAM 30
-#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#ifdef CONFIG_SDMA_IRAM
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
-#else /*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#endif /*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
-
-#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
-
-/*
- * DMA request assignments
- */
-#define MX51_DMA_REQ_VPU 0
-#define MX51_DMA_REQ_GPC 1
-#define MX51_DMA_REQ_ATA_RX 2
-#define MX51_DMA_REQ_ATA_TX 3
-#define MX51_DMA_REQ_ATA_TX_END 4
-#define MX51_DMA_REQ_SLIM_B 5
-#define MX51_DMA_REQ_CSPI1_RX 6
-#define MX51_DMA_REQ_CSPI1_TX 7
-#define MX51_DMA_REQ_CSPI2_RX 8
-#define MX51_DMA_REQ_CSPI2_TX 9
-#define MX51_DMA_REQ_HS_I2C_TX 10
-#define MX51_DMA_REQ_HS_I2C_RX 11
-#define MX51_DMA_REQ_FIRI_RX 12
-#define MX51_DMA_REQ_FIRI_TX 13
-#define MX51_DMA_REQ_EXTREQ1 14
-#define MX51_DMA_REQ_GPU 15
-#define MX51_DMA_REQ_UART2_RX 16
-#define MX51_DMA_REQ_UART2_TX 17
-#define MX51_DMA_REQ_UART1_RX 18
-#define MX51_DMA_REQ_UART1_TX 19
-#define MX51_DMA_REQ_SDHC1 20
-#define MX51_DMA_REQ_SDHC2 21
-#define MX51_DMA_REQ_SSI2_RX1 22
-#define MX51_DMA_REQ_SSI2_TX1 23
-#define MX51_DMA_REQ_SSI2_RX0 24
-#define MX51_DMA_REQ_SSI2_TX0 25
-#define MX51_DMA_REQ_SSI1_RX1 26
-#define MX51_DMA_REQ_SSI1_TX1 27
-#define MX51_DMA_REQ_SSI1_RX0 28
-#define MX51_DMA_REQ_SSI1_TX0 29
-#define MX51_DMA_REQ_EMI_RD 30
-#define MX51_DMA_REQ_CTI2_0 31
-#define MX51_DMA_REQ_EMI_WR 32
-#define MX51_DMA_REQ_CTI2_1 33
-#define MX51_DMA_REQ_EPIT2 34
-#define MX51_DMA_REQ_SSI3_RX1 35
-#define MX51_DMA_REQ_IPU 36
-#define MX51_DMA_REQ_SSI3_TX1 37
-#define MX51_DMA_REQ_CSPI_RX 38
-#define MX51_DMA_REQ_CSPI_TX 39
-#define MX51_DMA_REQ_SDHC3 40
-#define MX51_DMA_REQ_SDHC4 41
-#define MX51_DMA_REQ_SLIM_B_TX 42
-#define MX51_DMA_REQ_UART3_RX 43
-#define MX51_DMA_REQ_UART3_TX 44
-#define MX51_DMA_REQ_SPDIF 45
-#define MX51_DMA_REQ_SSI3_RX0 46
-#define MX51_DMA_REQ_SSI3_TX0 47
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX51_INT_BASE (NR_IRQS_LEGACY + 0)
-#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0)
-#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
-#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
-#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
-#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
-#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5)
-#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX51_INT_NFC (NR_IRQS_LEGACY + 8)
-#define MX51_INT_VPU (NR_IRQS_LEGACY + 9)
-#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
-#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
-#define MX51_INT_GPU (NR_IRQS_LEGACY + 12)
-#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13)
-#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14)
-#define MX51_INT_EMI (NR_IRQS_LEGACY + 15)
-#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16)
-#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17)
-#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
-#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
-#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
-#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
-#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
-#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26)
-#define MX51_INT_CSU (NR_IRQS_LEGACY + 27)
-#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28)
-#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34)
-#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35)
-#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
-#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
-#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX51_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41)
-#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59)
-#define MX51_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64)
-#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65)
-#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66)
-#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67)
-#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
-#define MX51_INT_IIM (NR_IRQS_LEGACY + 69)
-#define MX51_INT_ATA (NR_IRQS_LEGACY + 70)
-#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX51_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX51_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX51_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81)
-#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82)
-#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83)
-#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86)
-#define MX51_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX51_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91)
-#define MX51_INT_TVE (NR_IRQS_LEGACY + 92)
-#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93)
-#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
-#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96)
-#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
-#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99)
-#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
-#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
-#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx51_revision(void);
-extern void mx51_display_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/mach-imx/mx53.h b/arch/arm/mach-imx/mx53.h
deleted file mode 100644
index f829d1c22501..000000000000
--- a/arch/arm/mach-imx/mx53.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef __MACH_MX53_H__
-#define __MACH_MX53_H__
-
-/*
- * IROM
- */
-#define MX53_IROM_BASE_ADDR 0x0
-#define MX53_IROM_SIZE SZ_64K
-
-/* TZIC */
-#define MX53_TZIC_BASE_ADDR 0x0FFFC000
-#define MX53_TZIC_SIZE SZ_16K
-
-/*
- * AHCI SATA
- */
-#define MX53_SATA_BASE_ADDR 0x10000000
-
-/*
- * NFC
- */
-#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */
-#define MX53_NFC_AXI_SIZE SZ_64K
-
-/*
- * IRAM
- */
-#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */
-#define MX53_IRAM_PARTITIONS 16
-#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-/*
- * Graphics Memory of GPU
- */
-#define MX53_IPU_CTRL_BASE_ADDR 0x18000000
-#define MX53_GPU2D_BASE_ADDR 0x20000000
-#define MX53_GPU_BASE_ADDR 0x30000000
-#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000
-
-#define MX53_DEBUG_BASE_ADDR 0x40000000
-#define MX53_DEBUG_SIZE SZ_1M
-#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000)
-#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000)
-#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000)
-#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000)
-#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000)
-#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000)
-#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000)
-#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX53_SPBA0_BASE_ADDR 0x50000000
-#define MX53_SPBA0_SIZE SZ_1M
-
-#define MX53_ESDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
-#define MX53_ESDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
-#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX53_ECSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
-#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000)
-#define MX53_ESDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
-#define MX53_ESDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
-#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000)
-#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000)
-#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000)
-#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000)
-#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000)
-#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000)
-
-/*
- * AIPS 1
- */
-#define MX53_AIPS1_BASE_ADDR 0x53F00000
-#define MX53_AIPS1_SIZE SZ_1M
-
-#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000)
-#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000)
-#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000)
-#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000)
-#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000)
-#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000)
-#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000)
-#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000)
-#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000)
-#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000)
-#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000)
-#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000)
-#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000)
-
-/*
- * AIPS 2
- */
-#define MX53_AIPS2_BASE_ADDR 0x63F00000
-#define MX53_AIPS2_SIZE SZ_1M
-
-#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000)
-#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000)
-#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000)
-#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000)
-#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000)
-#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000)
-#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000)
-#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX53_ECSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX53_CSPI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000)
-#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX53_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
-#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000)
-
-/*
- * Memory regions and CS
- */
-#define MX53_CSD0_BASE_ADDR 0x70000000
-#define MX53_CSD1_BASE_ADDR 0xB0000000
-#define MX53_CS0_BASE_ADDR 0xF0000000
-#define MX53_CS1_32MB_BASE_ADDR 0xF2000000
-#define MX53_CS1_64MB_BASE_ADDR 0xF4000000
-#define MX53_CS2_64MB_BASE_ADDR 0xF4000000
-#define MX53_CS2_96MB_BASE_ADDR 0xF6000000
-#define MX53_CS3_BASE_ADDR 0xF6000000
-
-#define MX53_IO_P2V(x) IMX_IO_P2V(x)
-#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX53_SPBA_SDHC1 0x04
-#define MX53_SPBA_SDHC2 0x08
-#define MX53_SPBA_UART3 0x0C
-#define MX53_SPBA_CSPI1 0x10
-#define MX53_SPBA_SSI2 0x14
-#define MX53_SPBA_SDHC3 0x20
-#define MX53_SPBA_SDHC4 0x24
-#define MX53_SPBA_SPDIF 0x28
-#define MX53_SPBA_ATA 0x30
-#define MX53_SPBA_SLIM 0x34
-#define MX53_SPBA_HSI2C 0x38
-#define MX53_SPBA_CTRL 0x3C
-
-/*
- * DMA request assignments
- */
-#define MX53_DMA_REQ_SSI3_TX0 47
-#define MX53_DMA_REQ_SSI3_RX0 46
-#define MX53_DMA_REQ_SSI3_TX1 45
-#define MX53_DMA_REQ_SSI3_RX1 44
-#define MX53_DMA_REQ_UART3_TX 43
-#define MX53_DMA_REQ_UART3_RX 42
-#define MX53_DMA_REQ_ESAI_TX 41
-#define MX53_DMA_REQ_ESAI_RX 40
-#define MX53_DMA_REQ_CSPI_TX 39
-#define MX53_DMA_REQ_CSPI_RX 38
-#define MX53_DMA_REQ_ASRC_DMA6 37
-#define MX53_DMA_REQ_ASRC_DMA5 36
-#define MX53_DMA_REQ_ASRC_DMA4 35
-#define MX53_DMA_REQ_ASRC_DMA3 34
-#define MX53_DMA_REQ_ASRC_DMA2 33
-#define MX53_DMA_REQ_ASRC_DMA1 32
-#define MX53_DMA_REQ_EMI_WR 31
-#define MX53_DMA_REQ_EMI_RD 30
-#define MX53_DMA_REQ_SSI1_TX0 29
-#define MX53_DMA_REQ_SSI1_RX0 28
-#define MX53_DMA_REQ_SSI1_TX1 27
-#define MX53_DMA_REQ_SSI1_RX1 26
-#define MX53_DMA_REQ_SSI2_TX0 25
-#define MX53_DMA_REQ_SSI2_RX0 24
-#define MX53_DMA_REQ_SSI2_TX1 23
-#define MX53_DMA_REQ_SSI2_RX1 22
-#define MX53_DMA_REQ_I2C2_SDHC2 21
-#define MX53_DMA_REQ_I2C1_SDHC1 20
-#define MX53_DMA_REQ_UART1_TX 19
-#define MX53_DMA_REQ_UART1_RX 18
-#define MX53_DMA_REQ_UART5_TX 17
-#define MX53_DMA_REQ_UART5_RX 16
-#define MX53_DMA_REQ_SPDIF_TX 15
-#define MX53_DMA_REQ_SPDIF_RX 14
-#define MX53_DMA_REQ_UART2_FIRI_TX 13
-#define MX53_DMA_REQ_UART2_FIRI_RX 12
-#define MX53_DMA_REQ_SDHC4 11
-#define MX53_DMA_REQ_I2C3_SDHC3 10
-#define MX53_DMA_REQ_CSPI2_TX 9
-#define MX53_DMA_REQ_CSPI2_RX 8
-#define MX53_DMA_REQ_CSPI1_TX 7
-#define MX53_DMA_REQ_CSPI1_RX 6
-#define MX53_DMA_REQ_IPU 5
-#define MX53_DMA_REQ_ATA_TX_END 4
-#define MX53_DMA_REQ_ATA_UART4_TX 3
-#define MX53_DMA_REQ_ATA_UART4_RX 2
-#define MX53_DMA_REQ_GPC 1
-#define MX53_DMA_REQ_VPU 0
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0)
-#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
-#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
-#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
-#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
-#define MX53_INT_DAP (NR_IRQS_LEGACY + 5)
-#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX53_INT_NFC (NR_IRQS_LEGACY + 8)
-#define MX53_INT_VPU (NR_IRQS_LEGACY + 9)
-#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
-#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
-#define MX53_INT_GPU (NR_IRQS_LEGACY + 12)
-#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13)
-#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14)
-#define MX53_INT_EMI (NR_IRQS_LEGACY + 15)
-#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16)
-#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17)
-#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
-#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
-#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
-#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
-#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
-#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26)
-#define MX53_INT_CSU (NR_IRQS_LEGACY + 27)
-#define MX53_INT_SATA (NR_IRQS_LEGACY + 28)
-#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX53_INT_RTC (NR_IRQS_LEGACY + 34)
-#define MX53_INT_PTP (NR_IRQS_LEGACY + 35)
-#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
-#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
-#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX53_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41)
-#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59)
-#define MX53_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64)
-#define MX53_INT_MLB (NR_IRQS_LEGACY + 65)
-#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66)
-#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67)
-#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
-#define MX53_INT_IIM (NR_IRQS_LEGACY + 69)
-#define MX53_INT_ATA (NR_IRQS_LEGACY + 70)
-#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX53_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX53_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX53_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81)
-#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82)
-#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83)
-#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86)
-#define MX53_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX53_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX53_INT_TVE (NR_IRQS_LEGACY + 92)
-#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93)
-#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
-#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96)
-#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
-#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99)
-#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
-#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
-#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
-#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
-#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
-#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
-#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
-#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107)
-#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108)
-
-#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 75d6a37e1ae4..a39b69ef4301 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -154,10 +154,17 @@ extern unsigned int __mxc_cpu_type;
#endif
#ifndef __ASSEMBLY__
+#ifdef CONFIG_SOC_IMX6SL
static inline bool cpu_is_imx6sl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6SL;
}
+#else
+static inline bool cpu_is_imx6sl(void)
+{
+ return false;
+}
+#endif
static inline bool cpu_is_imx6dl(void)
{
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 58aeaf5baaf6..f1f80ab73e69 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -19,9 +19,26 @@
#include "common.h"
#include "cpuidle.h"
-#include "crm-regs-imx5.h"
#include "hardware.h"
+#define MXC_CCM_CLPCR 0x54
+#define MXC_CCM_CLPCR_LPM_OFFSET 0
+#define MXC_CCM_CLPCR_LPM_MASK 0x3
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9
+#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
+#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
+
+#define MXC_CORTEXA8_PLAT_LPC 0xc
+#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
+
+#define MXC_SRPG_NEON_SRPGCR 0x280
+#define MXC_SRPG_ARM_SRPGCR 0x2a0
+#define MXC_SRPG_EMPGC0_SRPGCR 0x2c0
+#define MXC_SRPG_EMPGC1_SRPGCR 0x2d0
+
+#define MXC_SRPGCR_PCR 1
+
/*
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
* This is also the lowest power state possible without affecting
@@ -32,6 +49,30 @@
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
+struct imx5_pm_data {
+ phys_addr_t cortex_addr;
+ phys_addr_t gpc_addr;
+};
+
+static const struct imx5_pm_data imx51_pm_data __initconst = {
+ .cortex_addr = 0x83fa0000,
+ .gpc_addr = 0x73fd8000,
+};
+
+static const struct imx5_pm_data imx53_pm_data __initconst = {
+ .cortex_addr = 0x63fa0000,
+ .gpc_addr = 0x53fd8000,
+};
+
+static void __iomem *ccm_base;
+static void __iomem *cortex_base;
+static void __iomem *gpc_base;
+
+void __init imx5_pm_set_ccm_base(void __iomem *base)
+{
+ ccm_base = base;
+}
+
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx51, and mx53.
@@ -43,12 +84,16 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
int stop_mode = 0;
/* always allow platform to issue a deep sleep mode request */
- plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+ plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
~(MXC_CORTEXA8_PLAT_LPC_DSM);
- ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
- arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
+ ~(MXC_CCM_CLPCR_LPM_MASK);
+ arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
+ empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
+ empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
switch (mode) {
case WAIT_CLOCKED:
@@ -82,17 +127,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
return;
}
- __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
- __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+ __raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
+ __raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
+ __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
+ __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
if (stop_mode) {
empgc0 |= MXC_SRPGCR_PCR;
empgc1 |= MXC_SRPGCR_PCR;
- __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+ __raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
}
@@ -114,8 +159,8 @@ static int mx5_suspend_enter(suspend_state_t state)
flush_cache_all();
/*clear the EMPGC0/1 bits */
- __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
@@ -149,7 +194,7 @@ static void imx5_pm_idle(void)
imx5_cpu_do_idle();
}
-static int __init imx5_pm_common_init(void)
+static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
{
int ret;
struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
@@ -163,15 +208,28 @@ static int __init imx5_pm_common_init(void)
arm_pm_idle = imx5_pm_idle;
+ cortex_base = ioremap(data->cortex_addr, SZ_16K);
+ gpc_base = ioremap(data->gpc_addr, SZ_16K);
+ WARN_ON(!ccm_base || !cortex_base || !gpc_base);
+
/* Set the registers to the default cpu idle state. */
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
- return imx5_cpuidle_init();
+ ret = imx5_cpuidle_init();
+ if (ret)
+ pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
+
+ suspend_set_ops(&mx5_suspend_ops);
+
+ return 0;
+}
+
+void __init imx51_pm_init(void)
+{
+ imx5_pm_common_init(&imx51_pm_data);
}
-void __init imx5_pm_init(void)
+void __init imx53_pm_init(void)
{
- int ret = imx5_pm_common_init();
- if (!ret)
- suspend_set_ops(&mx5_suspend_ops);
+ imx5_pm_common_init(&imx53_pm_data);
}
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 9392a8f4ef24..5c3af8f993d0 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -129,6 +129,14 @@ static const u32 imx6sl_mmdc_io_offset[] __initconst = {
0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */
};
+static const u32 imx6sx_mmdc_io_offset[] __initconst = {
+ 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
+ 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
+ 0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+ 0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
+ 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
+};
+
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
@@ -159,6 +167,16 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
.mmdc_io_offset = imx6sl_mmdc_io_offset,
};
+static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
+ .cpu_type = MXC_CPU_IMX6SX,
+ .mmdc_compat = "fsl,imx6sx-mmdc",
+ .src_compat = "fsl,imx6sx-src",
+ .iomuxc_compat = "fsl,imx6sx-iomuxc",
+ .gpc_compat = "fsl,imx6sx-gpc",
+ .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
+ .mmdc_io_offset = imx6sx_mmdc_io_offset,
+};
+
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -181,11 +199,13 @@ struct imx6_cpu_pm_info {
u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);
-void imx6q_set_int_mem_clk_lpm(void)
+void imx6q_set_int_mem_clk_lpm(bool enable)
{
u32 val = readl_relaxed(ccm_base + CGPR);
- val |= BM_CGPR_INT_MEM_CLK_LPM;
+ val &= ~BM_CGPR_INT_MEM_CLK_LPM;
+ if (enable)
+ val |= BM_CGPR_INT_MEM_CLK_LPM;
writel_relaxed(val, ccm_base + CGPR);
}
@@ -254,6 +274,14 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
break;
case STOP_POWER_ON:
val |= 0x2 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ if (cpu_is_imx6sl())
+ val |= BM_CLPCR_BYPASS_PMIC_READY;
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
+ val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+ else
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
case WAIT_UNCLOCKED_POWER_OFF:
val |= 0x1 << BP_CLPCR_LPM;
@@ -265,12 +293,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
- if (cpu_is_imx6sl()) {
+ if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
- } else {
+ else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
- }
break;
default:
return -EINVAL;
@@ -314,8 +342,22 @@ static int imx6q_suspend_finish(unsigned long val)
static int imx6q_pm_enter(suspend_state_t state)
{
switch (state) {
+ case PM_SUSPEND_STANDBY:
+ imx6q_set_lpm(STOP_POWER_ON);
+ imx6q_set_int_mem_clk_lpm(true);
+ imx_gpc_pre_suspend(false);
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(true);
+ /* Zzz ... */
+ cpu_do_idle();
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(false);
+ imx_gpc_post_resume();
+ imx6q_set_lpm(WAIT_CLOCKED);
+ break;
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
+ imx6q_set_int_mem_clk_lpm(false);
imx6q_enable_wb(true);
/*
* For suspend into ocram, asm code already take care of
@@ -323,7 +365,7 @@ static int imx6q_pm_enter(suspend_state_t state)
*/
if (!imx6_suspend_in_ocram_fn)
imx6q_enable_rbc(true);
- imx_gpc_pre_suspend();
+ imx_gpc_pre_suspend(true);
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
@@ -334,6 +376,7 @@ static int imx6q_pm_enter(suspend_state_t state)
imx_gpc_post_resume();
imx6q_enable_rbc(false);
imx6q_enable_wb(false);
+ imx6q_set_int_mem_clk_lpm(true);
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
@@ -343,9 +386,14 @@ static int imx6q_pm_enter(suspend_state_t state)
return 0;
}
+static int imx6q_pm_valid(suspend_state_t state)
+{
+ return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
+}
+
static const struct platform_suspend_ops imx6q_pm_ops = {
.enter = imx6q_pm_enter,
- .valid = suspend_valid_only_mem,
+ .valid = imx6q_pm_valid,
};
void __init imx6q_pm_set_ccm_base(void __iomem *base)
@@ -549,3 +597,8 @@ void __init imx6sl_pm_init(void)
{
imx6_pm_common_init(&imx6sl_pm_data);
}
+
+void __init imx6sx_pm_init(void)
+{
+ imx6_pm_common_init(&imx6sx_pm_data);
+}
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 3b0733edb68c..d14c33fd6b03 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -42,7 +42,10 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
{
unsigned int wcr_enable;
- if (wdog_clk)
+ if (!wdog_base)
+ goto reset_fallback;
+
+ if (!IS_ERR(wdog_clk))
clk_enable(wdog_clk);
if (cpu_is_mx1())
@@ -70,6 +73,7 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
/* delay to allow the serial port to show the message */
mdelay(50);
+reset_fallback:
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}
@@ -79,13 +83,10 @@ void __init mxc_arch_reset_init(void __iomem *base)
wdog_base = base;
wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
- if (IS_ERR(wdog_clk)) {
+ if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
- wdog_clk = NULL;
- return;
- }
-
- clk_prepare(wdog_clk);
+ else
+ clk_prepare(wdog_clk);
}
void __init mxc_arch_reset_init_dt(void)
@@ -97,13 +98,10 @@ void __init mxc_arch_reset_init_dt(void)
WARN_ON(!wdog_base);
wdog_clk = of_clk_get(np, 0);
- if (IS_ERR(wdog_clk)) {
+ if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
- wdog_clk = NULL;
- return;
- }
-
- clk_prepare(wdog_clk);
+ else
+ clk_prepare(wdog_clk);
}
#ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index bed081e58262..bf92e5a351c0 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -290,25 +290,20 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
return 0;
}
-void __init mxc_timer_init(void __iomem *base, int irq)
+static void __init _mxc_timer_init(int irq,
+ struct clk *clk_per, struct clk *clk_ipg)
{
uint32_t tctl_val;
- struct clk *timer_clk;
- struct clk *timer_ipg_clk;
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
+ if (IS_ERR(clk_per)) {
pr_err("i.MX timer: unable to get clk\n");
return;
}
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
-
- clk_prepare_enable(timer_clk);
+ if (!IS_ERR(clk_ipg))
+ clk_prepare_enable(clk_ipg);
- timer_base = base;
+ clk_prepare_enable(clk_per);
/*
* Initialise to a known state (all timers off, and timing reset)
@@ -325,21 +320,45 @@ void __init mxc_timer_init(void __iomem *base, int irq)
__raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
- mxc_clocksource_init(timer_clk);
- mxc_clockevent_init(timer_clk);
+ mxc_clocksource_init(clk_per);
+ mxc_clockevent_init(clk_per);
/* Make irqs happen */
setup_irq(irq, &mxc_timer_irq);
}
-void __init mxc_timer_init_dt(struct device_node *np)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
- void __iomem *base;
+ struct clk *clk_per = clk_get_sys("imx-gpt.0", "per");
+ struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
+
+ timer_base = base;
+
+ _mxc_timer_init(irq, clk_per, clk_ipg);
+}
+
+static void __init mxc_timer_init_dt(struct device_node *np)
+{
+ struct clk *clk_per, *clk_ipg;
int irq;
- base = of_iomap(np, 0);
- WARN_ON(!base);
+ if (timer_base)
+ return;
+
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ clk_per = of_clk_get_by_name(np, "per");
+ clk_ipg = of_clk_get_by_name(np, "ipg");
+
+ _mxc_timer_init(irq, clk_per, clk_ipg);
}
+CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx25_timer, "fsl,imx25-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx50_timer, "fsl,imx50-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx51_timer, "fsl,imx51-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx53_timer, "fsl,imx53-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6q_timer, "fsl,imx6q-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6sl_timer, "fsl,imx6sl-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6sx_timer, "fsl,imx6sx-gpt", mxc_timer_init_dt);
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 7828af4b2022..1d4f384ca773 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -153,13 +154,16 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
-void __init tzic_init_irq(void __iomem *irqbase)
+void __init tzic_init_irq(void)
{
struct device_node *np;
int irq_base;
int i;
- tzic_base = irqbase;
+ np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
+ tzic_base = of_iomap(np, 0);
+ WARN_ON(!tzic_base);
+
/* put the TZIC into the reset value with
* all interrupts disabled
*/
@@ -181,7 +185,6 @@ void __init tzic_init_irq(void __iomem *irqbase)
irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
WARN_ON(irq_base < 0);
- np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
&irq_domain_simple_ops, NULL);
WARN_ON(!domain);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 660ca6feff40..8ca290b479b1 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -31,7 +31,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/irqchip/versatile-fpga.h>
+#include <linux/irqchip.h>
#include <linux/mtd/physmap.h>
#include <linux/clk.h>
#include <linux/platform_data/clk-integrator.h>
@@ -439,15 +439,10 @@ static void __init ap_of_timer_init(void)
integrator_clockevent_init(rate, base, irq);
}
-static const struct of_device_id fpga_irq_of_match[] __initconst = {
- { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
- { /* Sentinel */ }
-};
-
static void __init ap_init_irq_of(void)
{
cm_init();
- of_irq_init(fpga_irq_of_match);
+ irqchip_init();
}
/* For the Device Tree, add in the UART callbacks as AUXDATA */
@@ -558,7 +553,6 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
.map_io = ap_map_io,
.init_early = ap_init_early,
.init_irq = ap_init_irq_of,
- .handle_irq = fpga_handle_irq,
.init_time = ap_of_timer_init,
.init_machine = ap_init_of,
.restart = integrator_restart,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 0e57f8f820a5..5236ebee249c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,7 +20,7 @@
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
-#include <linux/irqchip/versatile-fpga.h>
+#include <linux/irqchip.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/of_irq.h>
@@ -235,15 +235,10 @@ static void __init intcp_init_early(void)
sched_clock_register(intcp_read_sched_clock, 32, 24000000);
}
-static const struct of_device_id fpga_irq_of_match[] __initconst = {
- { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
- { /* Sentinel */ }
-};
-
static void __init intcp_init_irq_of(void)
{
cm_init();
- of_irq_init(fpga_irq_of_match);
+ irqchip_init();
}
/*
@@ -329,7 +324,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.map_io = intcp_map_io,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
- .handle_irq = fpga_handle_irq,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
deleted file mode 100644
index df4b26340ae4..000000000000
--- a/arch/arm/mach-kirkwood/Kconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-if ARCH_KIRKWOOD
-
-menu "Marvell Kirkwood Implementations"
-
-config KIRKWOOD_LEGACY
- bool
-
-config MACH_D2NET_V2
- bool "LaCie d2 Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie d2 Network v2 NAS.
-
-config MACH_NET2BIG_V2
- bool "LaCie 2Big Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big Network v2 NAS.
-
-config MACH_NET5BIG_V2
- bool "LaCie 5Big Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 5Big Network v2 NAS.
-
-config MACH_OPENRD
- select KIRKWOOD_LEGACY
- bool
-
-config MACH_OPENRD_BASE
- bool "Marvell OpenRD Base Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Base Board.
-
-config MACH_OPENRD_CLIENT
- bool "Marvell OpenRD Client Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Client Board.
-
-config MACH_OPENRD_ULTIMATE
- bool "Marvell OpenRD Ultimate Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Ultimate Board.
-
-config MACH_RD88F6192_NAS
- bool "Marvell RD-88F6192-NAS Reference Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6192-NAS Reference Board.
-
-config MACH_RD88F6281
- bool "Marvell RD-88F6281 Reference Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6281 Reference Board.
-
-config MACH_T5325
- bool "HP t5325 Thin Client"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- HP t5325 Thin Client.
-
-config MACH_TS219
- bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
- TS-219P+ Turbo NAS devices.
-
-config MACH_TS41X
- bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
- NAS devices.
-
-comment "Device tree entries"
-
-config ARCH_KIRKWOOD_DT
- bool "Marvell Kirkwood Flattened Device Tree"
- select KIRKWOOD_CLK
- select OF_IRQ
- select ORION_IRQCHIP
- select ORION_TIMER
- select POWER_SUPPLY
- select POWER_RESET
- select POWER_RESET_GPIO
- select REGULATOR
- select REGULATOR_FIXED_VOLTAGE
- select USE_OF
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Kirkwood using flattened device tree.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
deleted file mode 100644
index 3a72c5c6e747..000000000000
--- a/arch/arm/mach-kirkwood/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
-obj-$(CONFIG_PM) += pm.o
-
-obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
-obj-$(CONFIG_MACH_T5325) += t5325-setup.o
-obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
-
-obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
deleted file mode 100644
index 760a0efe7580..000000000000
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
deleted file mode 100644
index ff18ff20f71f..000000000000
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dt.c
- *
- * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_net.h>
-#include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqchip.h>
-#include <asm/hardware/cache-feroceon-l2.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/bridge-regs.h>
-#include <plat/common.h>
-#include <plat/pcie.h>
-#include "pm.h"
-
-static struct map_desc kirkwood_io_desc[] __initdata = {
- {
- .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
- .length = KIRKWOOD_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static void __init kirkwood_map_io(void)
-{
- iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-static struct resource kirkwood_cpufreq_resources[] = {
- [0] = {
- .start = CPU_CONTROL_PHYS,
- .end = CPU_CONTROL_PHYS + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device kirkwood_cpufreq_device = {
- .name = "kirkwood-cpufreq",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
- .resource = kirkwood_cpufreq_resources,
-};
-
-static void __init kirkwood_cpufreq_init(void)
-{
- platform_device_register(&kirkwood_cpufreq_device);
-}
-
-static struct resource kirkwood_cpuidle_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = DDR_OPERATION_BASE,
- .end = DDR_OPERATION_BASE + 3,
- },
-};
-
-static struct platform_device kirkwood_cpuidle = {
- .name = "kirkwood_cpuidle",
- .id = -1,
- .resource = kirkwood_cpuidle_resource,
- .num_resources = 1,
-};
-
-static void __init kirkwood_cpuidle_init(void)
-{
- platform_device_register(&kirkwood_cpuidle);
-}
-
-/* Temporary here since mach-mvebu has a function we can use */
-static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
-#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
-
-static void __init kirkwood_dt_eth_fixup(void)
-{
- struct device_node *np;
-
- /*
- * The ethernet interfaces forget the MAC address assigned by u-boot
- * if the clocks are turned off. Usually, u-boot on kirkwood boards
- * has no DT support to properly set local-mac-address property.
- * As a workaround, we get the MAC address from mv643xx_eth registers
- * and update the port device node if no valid MAC address is set.
- */
- for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
- struct device_node *pnp = of_get_parent(np);
- struct clk *clk;
- struct property *pmac;
- void __iomem *io;
- u8 *macaddr;
- u32 reg;
-
- if (!pnp)
- continue;
-
- /* skip disabled nodes or nodes with valid MAC address*/
- if (!of_device_is_available(pnp) || of_get_mac_address(np))
- goto eth_fixup_skip;
-
- clk = of_clk_get(pnp, 0);
- if (IS_ERR(clk))
- goto eth_fixup_skip;
-
- io = of_iomap(pnp, 0);
- if (!io)
- goto eth_fixup_no_map;
-
- /* ensure port clock is not gated to not hang CPU */
- clk_prepare_enable(clk);
-
- /* store MAC address register contents in local-mac-address */
- pr_err(FW_INFO "%s: local-mac-address is not set\n",
- np->full_name);
-
- pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
- if (!pmac)
- goto eth_fixup_no_mem;
-
- pmac->value = pmac + 1;
- pmac->length = 6;
- pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
- if (!pmac->name) {
- kfree(pmac);
- goto eth_fixup_no_mem;
- }
-
- macaddr = pmac->value;
- reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
- macaddr[0] = (reg >> 24) & 0xff;
- macaddr[1] = (reg >> 16) & 0xff;
- macaddr[2] = (reg >> 8) & 0xff;
- macaddr[3] = reg & 0xff;
-
- reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
- macaddr[4] = (reg >> 8) & 0xff;
- macaddr[5] = reg & 0xff;
-
- of_update_property(np, pmac);
-
-eth_fixup_no_mem:
- iounmap(io);
- clk_disable_unprepare(clk);
-eth_fixup_no_map:
- clk_put(clk);
-eth_fixup_skip:
- of_node_put(pnp);
- }
-}
-
-/*
- * Disable propagation of mbus errors to the CPU local bus, as this
- * causes mbus errors (which can occur for example for PCI aborts) to
- * throw CPU aborts, which we're not set up to deal with.
- */
-static void __init kirkwood_disable_mbus_error_propagation(void)
-{
- void __iomem *cpu_config;
-
- cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
- writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
- iounmap(cpu_config);
-}
-
-static void __init kirkwood_dt_init(void)
-{
- kirkwood_disable_mbus_error_propagation();
-
- BUG_ON(mvebu_mbus_dt_init(false));
-
-#ifdef CONFIG_CACHE_FEROCEON_L2
- feroceon_of_init();
-#endif
- kirkwood_cpufreq_init();
- kirkwood_cpuidle_init();
-
- kirkwood_pm_init();
- kirkwood_dt_eth_fixup();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const kirkwood_dt_board_compat[] = {
- "marvell,kirkwood",
- NULL
-};
-
-DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
- /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
- .map_io = kirkwood_map_io,
- .init_machine = kirkwood_dt_init,
- .restart = kirkwood_restart,
- .dt_compat = kirkwood_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
deleted file mode 100644
index 255f33a3903c..000000000000
--- a/arch/arm/mach-kirkwood/common.c
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.c
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/nand.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk-provider.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx_i2c.h>
-#include <linux/timex.h>
-#include <linux/kexec.h>
-#include <linux/reboot.h>
-#include <net/dsa.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-feroceon-l2.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/asoc-kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include <linux/platform_data/mtd-orion_nand.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <plat/common.h>
-#include <plat/time.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include "common.h"
-#include "pm.h"
-
-/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
-#define KIRKWOOD_MBUS_NAND_TARGET 0x01
-#define KIRKWOOD_MBUS_NAND_ATTR 0x2f
-#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
-#define KIRKWOOD_MBUS_SRAM_ATTR 0x01
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc kirkwood_io_desc[] __initdata = {
- {
- .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
- .length = KIRKWOOD_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init kirkwood_map_io(void)
-{
- iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-/*****************************************************************************
- * CLK tree
- ****************************************************************************/
-
-static void enable_sata0(void)
-{
- /* Enable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
- /* Enable PHY */
- writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
-}
-
-static void disable_sata0(void)
-{
- /* Disable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
-}
-
-static void enable_sata1(void)
-{
- /* Enable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
- /* Enable PHY */
- writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
-}
-
-static void disable_sata1(void)
-{
- /* Disable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
-}
-
-static void disable_pcie0(void)
-{
- writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
- while (1)
- if (readl(PCIE_STATUS) & 0x1)
- break;
- writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
-}
-
-static void disable_pcie1(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6282_DEV_ID) {
- writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
- while (1)
- if (readl(PCIE1_STATUS) & 0x1)
- break;
- writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
- }
-}
-
-/* An extended version of the gated clk. This calls fn_en()/fn_dis
- * before enabling/disabling the clock. We use this to turn on/off
- * PHYs etc. */
-struct clk_gate_fn {
- struct clk_gate gate;
- void (*fn_en)(void);
- void (*fn_dis)(void);
-};
-
-#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
-
-static int clk_gate_fn_enable(struct clk_hw *hw)
-{
- struct clk_gate *gate = to_clk_gate(hw);
- struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
- int ret;
-
- ret = clk_gate_ops.enable(hw);
- if (!ret && gate_fn->fn_en)
- gate_fn->fn_en();
-
- return ret;
-}
-
-static void clk_gate_fn_disable(struct clk_hw *hw)
-{
- struct clk_gate *gate = to_clk_gate(hw);
- struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
-
- if (gate_fn->fn_dis)
- gate_fn->fn_dis();
-
- clk_gate_ops.disable(hw);
-}
-
-static struct clk_ops clk_gate_fn_ops;
-
-static struct clk __init *clk_register_gate_fn(struct device *dev,
- const char *name,
- const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
- u8 clk_gate_flags, spinlock_t *lock,
- void (*fn_en)(void), void (*fn_dis)(void))
-{
- struct clk_gate_fn *gate_fn;
- struct clk *clk;
- struct clk_init_data init;
-
- gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
- if (!gate_fn) {
- pr_err("%s: could not allocate gated clk\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- init.name = name;
- init.ops = &clk_gate_fn_ops;
- init.flags = flags;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- /* struct clk_gate assignments */
- gate_fn->gate.reg = reg;
- gate_fn->gate.bit_idx = bit_idx;
- gate_fn->gate.flags = clk_gate_flags;
- gate_fn->gate.lock = lock;
- gate_fn->gate.hw.init = &init;
- gate_fn->fn_en = fn_en;
- gate_fn->fn_dis = fn_dis;
-
- /* ops is the gate ops, but with our enable/disable functions */
- if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
- clk_gate_fn_ops.disable != clk_gate_fn_disable) {
- clk_gate_fn_ops = clk_gate_ops;
- clk_gate_fn_ops.enable = clk_gate_fn_enable;
- clk_gate_fn_ops.disable = clk_gate_fn_disable;
- }
-
- clk = clk_register(dev, &gate_fn->gate.hw);
-
- if (IS_ERR(clk))
- kfree(gate_fn);
-
- return clk;
-}
-
-static DEFINE_SPINLOCK(gating_lock);
-static struct clk *tclk;
-
-static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
-{
- return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock);
-}
-
-static struct clk __init *kirkwood_register_gate_fn(const char *name,
- u8 bit_idx,
- void (*fn_en)(void),
- void (*fn_dis)(void))
-{
- return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock, fn_en, fn_dis);
-}
-
-static struct clk *ge0, *ge1;
-
-void __init kirkwood_clk_init(void)
-{
- struct clk *runit, *sata0, *sata1, *usb0, *sdio;
- struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
-
- tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
- CLK_IS_ROOT, kirkwood_tclk);
-
- runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT);
- ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0);
- ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
- sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0,
- enable_sata0, disable_sata0);
- sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1,
- enable_sata1, disable_sata1);
- usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
- sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO);
- crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
- xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
- xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
- pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0,
- NULL, disable_pcie0);
- pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1,
- NULL, disable_pcie1);
- audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO);
- kirkwood_register_gate("tdm", CGC_BIT_TDM);
- kirkwood_register_gate("tsu", CGC_BIT_TSU);
-
- /* clkdev entries, mapping clks to devices */
- orion_clkdev_add(NULL, "orion_spi.0", runit);
- orion_clkdev_add(NULL, "orion_spi.1", runit);
- orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
- orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
- orion_clkdev_add(NULL, "orion_wdt", tclk);
- orion_clkdev_add("0", "sata_mv.0", sata0);
- orion_clkdev_add("1", "sata_mv.0", sata1);
- orion_clkdev_add(NULL, "orion-ehci.0", usb0);
- orion_clkdev_add(NULL, "orion_nand", runit);
- orion_clkdev_add(NULL, "mvsdio", sdio);
- orion_clkdev_add(NULL, "mv_crypto", crypto);
- orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
- orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
- orion_clkdev_add("0", "pcie", pex0);
- orion_clkdev_add("1", "pcie", pex1);
- orion_clkdev_add(NULL, "mvebu-audio", audio);
- orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
- orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
-
- /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
- * so should never be gated.
- */
- clk_prepare_enable(runit);
-}
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-void __init kirkwood_ehci_init(void)
-{
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-{
- orion_ge00_init(eth_data,
- GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
- IRQ_KIRKWOOD_GE00_ERR, 1600);
- /* The interface forgets the MAC address assigned by u-boot if
- the clock is turned off, so claim the clk now. */
- clk_prepare_enable(ge0);
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-{
- orion_ge01_init(eth_data,
- GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
- IRQ_KIRKWOOD_GE01_ERR, 1600);
- clk_prepare_enable(ge1);
-}
-
-
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
-{
- orion_ge00_switch_init(d, irq);
-}
-
-
-/*****************************************************************************
- * NAND flash
- ****************************************************************************/
-static struct resource kirkwood_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data kirkwood_nand_data = {
- .cle = 0,
- .ale = 1,
- .width = 8,
-};
-
-static struct platform_device kirkwood_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &kirkwood_nand_data,
- },
- .resource = &kirkwood_nand_resource,
- .num_resources = 1,
-};
-
-void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
- int chip_delay)
-{
- kirkwood_nand_data.parts = parts;
- kirkwood_nand_data.nr_parts = nr_parts;
- kirkwood_nand_data.chip_delay = chip_delay;
- platform_device_register(&kirkwood_nand_flash);
-}
-
-void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
- int (*dev_ready)(struct mtd_info *))
-{
- kirkwood_nand_data.parts = parts;
- kirkwood_nand_data.nr_parts = nr_parts;
- kirkwood_nand_data.dev_ready = dev_ready;
- platform_device_register(&kirkwood_nand_flash);
-}
-
-/*****************************************************************************
- * SoC RTC
- ****************************************************************************/
-static void __init kirkwood_rtc_init(void)
-{
- orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
-}
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
-{
- orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
-}
-
-
-/*****************************************************************************
- * SD/SDIO/MMC
- ****************************************************************************/
-static struct resource mvsdio_resources[] = {
- [0] = {
- .start = SDIO_PHYS_BASE,
- .end = SDIO_PHYS_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KIRKWOOD_SDIO,
- .end = IRQ_KIRKWOOD_SDIO,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device kirkwood_sdio = {
- .name = "mvsdio",
- .id = -1,
- .dev = {
- .dma_mask = &mvsdio_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mvsdio_resources),
- .resource = mvsdio_resources,
-};
-
-void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
- if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
- mvsdio_data->clock = 100000000;
- else
- mvsdio_data->clock = 200000000;
- kirkwood_sdio.dev.platform_data = mvsdio_data;
- platform_device_register(&kirkwood_sdio);
-}
-
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-void __init kirkwood_spi_init(void)
-{
- orion_spi_init(SPI_PHYS_BASE);
-}
-
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init kirkwood_i2c_init(void)
-{
- orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-
-void __init kirkwood_uart0_init(void)
-{
- orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_KIRKWOOD_UART_0, tclk);
-}
-
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init kirkwood_uart1_init(void)
-{
- orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_KIRKWOOD_UART_1, tclk);
-}
-
-/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-void __init kirkwood_crypto_init(void)
-{
- orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
-}
-
-
-/*****************************************************************************
- * XOR0
- ****************************************************************************/
-void __init kirkwood_xor0_init(void)
-{
- orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
- IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
-}
-
-
-/*****************************************************************************
- * XOR1
- ****************************************************************************/
-void __init kirkwood_xor1_init(void)
-{
- orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
- IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
-}
-
-
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-void __init kirkwood_wdt_init(void)
-{
- orion_wdt_init();
-}
-
-/*****************************************************************************
- * CPU idle
- ****************************************************************************/
-static struct resource kirkwood_cpuidle_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = DDR_OPERATION_BASE,
- .end = DDR_OPERATION_BASE + 3,
- },
-};
-
-static struct platform_device kirkwood_cpuidle = {
- .name = "kirkwood_cpuidle",
- .id = -1,
- .resource = kirkwood_cpuidle_resource,
- .num_resources = 1,
-};
-
-void __init kirkwood_cpuidle_init(void)
-{
- platform_device_register(&kirkwood_cpuidle);
-}
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init kirkwood_init_early(void)
-{
- orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-int kirkwood_tclk;
-
-static int __init kirkwood_find_tclk(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
- if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
- return 200000000;
-
- return 166666667;
-}
-
-void __init kirkwood_timer_init(void)
-{
- kirkwood_tclk = kirkwood_find_tclk();
-
- orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
- IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-/*****************************************************************************
- * Audio
- ****************************************************************************/
-static struct resource kirkwood_audio_resources[] = {
- [0] = {
- .start = AUDIO_PHYS_BASE,
- .end = AUDIO_PHYS_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KIRKWOOD_I2S,
- .end = IRQ_KIRKWOOD_I2S,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct kirkwood_asoc_platform_data kirkwood_audio_data = {
- .burst = 128,
-};
-
-static struct platform_device kirkwood_audio_device = {
- .name = "mvebu-audio",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_audio_resources),
- .resource = kirkwood_audio_resources,
- .dev = {
- .platform_data = &kirkwood_audio_data,
- },
-};
-
-void __init kirkwood_audio_init(void)
-{
- platform_device_register(&kirkwood_audio_device);
-}
-
-/*****************************************************************************
- * CPU Frequency
- ****************************************************************************/
-static struct resource kirkwood_cpufreq_resources[] = {
- [0] = {
- .start = CPU_CONTROL_PHYS,
- .end = CPU_CONTROL_PHYS + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device kirkwood_cpufreq_device = {
- .name = "kirkwood-cpufreq",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
- .resource = kirkwood_cpufreq_resources,
-};
-
-void __init kirkwood_cpufreq_init(void)
-{
- platform_device_register(&kirkwood_cpufreq_device);
-}
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-/*
- * Identify device ID and revision.
- */
-char * __init kirkwood_id(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID) {
- if (rev == MV88F6281_REV_Z0)
- return "MV88F6281-Z0";
- else if (rev == MV88F6281_REV_A0)
- return "MV88F6281-A0";
- else if (rev == MV88F6281_REV_A1)
- return "MV88F6281-A1";
- else
- return "MV88F6281-Rev-Unsupported";
- } else if (dev == MV88F6192_DEV_ID) {
- if (rev == MV88F6192_REV_Z0)
- return "MV88F6192-Z0";
- else if (rev == MV88F6192_REV_A0)
- return "MV88F6192-A0";
- else if (rev == MV88F6192_REV_A1)
- return "MV88F6192-A1";
- else
- return "MV88F6192-Rev-Unsupported";
- } else if (dev == MV88F6180_DEV_ID) {
- if (rev == MV88F6180_REV_A0)
- return "MV88F6180-Rev-A0";
- else if (rev == MV88F6180_REV_A1)
- return "MV88F6180-Rev-A1";
- else
- return "MV88F6180-Rev-Unsupported";
- } else if (dev == MV88F6282_DEV_ID) {
- if (rev == MV88F6282_REV_A0)
- return "MV88F6282-Rev-A0";
- else if (rev == MV88F6282_REV_A1)
- return "MV88F6282-Rev-A1";
- else
- return "MV88F6282-Rev-Unsupported";
- } else {
- return "Device-Unknown";
- }
-}
-
-void __init kirkwood_setup_wins(void)
-{
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
- KIRKWOOD_MBUS_NAND_ATTR,
- KIRKWOOD_NAND_MEM_PHYS_BASE,
- KIRKWOOD_NAND_MEM_SIZE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
- KIRKWOOD_MBUS_SRAM_ATTR,
- KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE);
-}
-
-void __init kirkwood_l2_init(void)
-{
-#ifdef CONFIG_CACHE_FEROCEON_L2
-#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
- writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(1);
-#else
- writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(0);
-#endif
-#endif
-}
-
-void __init kirkwood_init(void)
-{
- pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
-
- /*
- * Disable propagation of mbus errors to the CPU local bus,
- * as this causes mbus errors (which can occur for example
- * for PCI aborts) to throw CPU aborts, which we're not set
- * up to deal with.
- */
- writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
-
- BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
-
- kirkwood_setup_wins();
-
- kirkwood_l2_init();
-
- /* Setup root of clk tree */
- kirkwood_clk_init();
-
- /* internal devices that every board has */
- kirkwood_rtc_init();
- kirkwood_wdt_init();
- kirkwood_xor0_init();
- kirkwood_xor1_init();
- kirkwood_crypto_init();
-
- kirkwood_pm_init();
- kirkwood_cpuidle_init();
-#ifdef CONFIG_KEXEC
- kexec_reinit = kirkwood_enable_pcie;
-#endif
-}
-
-void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
deleted file mode 100644
index 832a4e2ab8d7..000000000000
--- a/arch/arm/mach-kirkwood/common.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.h
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_COMMON_H
-#define __ARCH_KIRKWOOD_COMMON_H
-
-#include <linux/reboot.h>
-
-struct dsa_platform_data;
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-struct mvsdio_platform_data;
-struct mtd_partition;
-struct mtd_info;
-struct kirkwood_asoc_platform_data;
-
-#define KW_PCIE0 (1 << 0)
-#define KW_PCIE1 (1 << 1)
-
-/*
- * Basic Kirkwood init functions used early by machine-setup.
- */
-void kirkwood_map_io(void);
-void kirkwood_init(void);
-void kirkwood_init_early(void);
-void kirkwood_init_irq(void);
-
-void kirkwood_setup_wins(void);
-
-void kirkwood_enable_pcie(void);
-void kirkwood_pcie_id(u32 *dev, u32 *rev);
-
-void kirkwood_ehci_init(void);
-void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(unsigned int portmask);
-void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
-void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
-void kirkwood_spi_init(void);
-void kirkwood_i2c_init(void);
-void kirkwood_uart0_init(void);
-void kirkwood_uart1_init(void);
-void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
- int (*dev_ready)(struct mtd_info *));
-void kirkwood_audio_init(void);
-void kirkwood_cpuidle_init(void);
-void kirkwood_cpufreq_init(void);
-
-void kirkwood_restart(enum reboot_mode, const char *);
-void kirkwood_clk_init(void);
-
-/* early init functions not converted to fdt yet */
-char *kirkwood_id(void);
-void kirkwood_l2_init(void);
-void kirkwood_wdt_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
-void kirkwood_crypto_init(void);
-
-extern int kirkwood_tclk;
-extern void kirkwood_timer_init(void);
-
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
deleted file mode 100644
index 453418063c1e..000000000000
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/d2net_v2-setup.c
- *
- * LaCie d2 Network Space v2 Board Setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_v2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_PUSH_BUTTON 34
-#define D2NET_V2_GPIO_POWER_SWITCH_ON 13
-#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15
-
-#define D2NET_V2_SWITCH_POWER_ON 0x1
-#define D2NET_V2_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button d2net_v2_buttons[] = {
- [0] = {
- .type = EV_SW,
- .code = D2NET_V2_SWITCH_POWER_ON,
- .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON,
- .desc = "Back power switch (on|auto)",
- .active_low = 0,
- },
- [1] = {
- .type = EV_SW,
- .code = D2NET_V2_SWITCH_POWER_OFF,
- .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF,
- .desc = "Back power switch (auto|off)",
- .active_low = 0,
- },
- [2] = {
- .code = KEY_POWER,
- .gpio = D2NET_V2_GPIO_PUSH_BUTTON,
- .desc = "Front Push Button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data d2net_v2_button_data = {
- .buttons = d2net_v2_buttons,
- .nbuttons = ARRAY_SIZE(d2net_v2_buttons),
-};
-
-static struct platform_device d2net_v2_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_button_data,
- },
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_RED_LED 12
-
-static struct gpio_led d2net_v2_gpio_led_pins[] = {
- {
- .name = "d2net_v2:red:fail",
- .gpio = D2NET_V2_GPIO_RED_LED,
- },
-};
-
-static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
- .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins),
- .leds = d2net_v2_gpio_led_pins,
-};
-
-static struct platform_device d2net_v2_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_gpio_leds_data,
- },
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_BLUE_LED_SLOW 29
-#define D2NET_V2_GPIO_BLUE_LED_CMD 30
-
-static struct ns2_led d2net_v2_led_pins[] = {
- {
- .name = "d2net_v2:blue:sata",
- .cmd = D2NET_V2_GPIO_BLUE_LED_CMD,
- .slow = D2NET_V2_GPIO_BLUE_LED_SLOW,
- },
-};
-
-static struct ns2_led_platform_data d2net_v2_leds_data = {
- .num_leds = ARRAY_SIZE(d2net_v2_led_pins),
- .leds = d2net_v2_led_pins,
-};
-
-static struct platform_device d2net_v2_leds = {
- .name = "leds-ns2",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_leds_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_GPO, /* Red led */
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA 0 power */
- MPP21_SATA0_ACTn,
- MPP24_GPIO, /* USB mode select */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* Blue led (slow register) */
- MPP30_GPIO, /* Blue led (command register) */
- MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */
- MPP35_GPIO, /* Inhibit power-off */
- 0
-};
-
-#define D2NET_V2_GPIO_POWER_OFF 7
-
-static void d2net_v2_power_off(void)
-{
- gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init d2net_v2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(d2net_v2_mpp_config);
-
- lacie_v2_hdd_power_init(1);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&d2net_v2_ge00_data);
- kirkwood_sata_init(&d2net_v2_sata_data);
- kirkwood_uart0_init();
- lacie_v2_register_flash();
- lacie_v2_register_i2c_devices();
-
- platform_device_register(&d2net_v2_leds);
- platform_device_register(&d2net_v2_gpio_leds);
- platform_device_register(&d2net_v2_gpio_buttons);
-
- if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = d2net_v2_power_off;
- else
- pr_err("d2net_v2: failed to configure power-off GPIO\n");
-}
-
-MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .atag_offset = 0x100,
- .init_machine = d2net_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
deleted file mode 100644
index 1c37082c8b39..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/kirkwood.h>
-
-#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
-#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
-#define CPU_CONFIG_ERROR_PROP 0x00000004
-
-#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
-#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
-#define CPU_RESET 0x00000002
-
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
-#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
-#define SOFT_RESET 0x00000001
-
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
-
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
-#define CGC_BIT_GE0 (0)
-#define CGC_BIT_PEX0 (2)
-#define CGC_BIT_USB0 (3)
-#define CGC_BIT_SDIO (4)
-#define CGC_BIT_TSU (5)
-#define CGC_BIT_DUNIT (6)
-#define CGC_BIT_RUNIT (7)
-#define CGC_BIT_XOR0 (8)
-#define CGC_BIT_AUDIO (9)
-#define CGC_BIT_SATA0 (14)
-#define CGC_BIT_SATA1 (15)
-#define CGC_BIT_XOR1 (16)
-#define CGC_BIT_CRYPTO (17)
-#define CGC_BIT_PEX1 (18)
-#define CGC_BIT_GE1 (19)
-#define CGC_BIT_TDM (20)
-#define CGC_GE0 (1 << 0)
-#define CGC_PEX0 (1 << 2)
-#define CGC_USB0 (1 << 3)
-#define CGC_SDIO (1 << 4)
-#define CGC_TSU (1 << 5)
-#define CGC_DUNIT (1 << 6)
-#define CGC_RUNIT (1 << 7)
-#define CGC_XOR0 (1 << 8)
-#define CGC_AUDIO (1 << 9)
-#define CGC_POWERSAVE (1 << 11)
-#define CGC_SATA0 (1 << 14)
-#define CGC_SATA1 (1 << 15)
-#define CGC_XOR1 (1 << 16)
-#define CGC_CRYPTO (1 << 17)
-#define CGC_PEX1 (1 << 18)
-#define CGC_GE1 (1 << 19)
-#define CGC_TDM (1 << 20)
-#define CGC_RESERVED (0x6 << 21)
-
-#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
-#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
deleted file mode 100644
index 82db29f7af8f..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no low interrupts set, check high interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- mov \irqnr, #63
- ands \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
-1001: clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
deleted file mode 100644
index 742b74f43e41..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
deleted file mode 100644
index 2bf8161e3b51..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM 0
-#define IRQ_KIRKWOOD_BRIDGE 1
-#define IRQ_KIRKWOOD_HOST2CPU 2
-#define IRQ_KIRKWOOD_CPU2HOST 3
-#define IRQ_KIRKWOOD_XOR_00 5
-#define IRQ_KIRKWOOD_XOR_01 6
-#define IRQ_KIRKWOOD_XOR_10 7
-#define IRQ_KIRKWOOD_XOR_11 8
-#define IRQ_KIRKWOOD_PCIE 9
-#define IRQ_KIRKWOOD_PCIE1 10
-#define IRQ_KIRKWOOD_GE00_SUM 11
-#define IRQ_KIRKWOOD_GE01_SUM 15
-#define IRQ_KIRKWOOD_USB 19
-#define IRQ_KIRKWOOD_SATA 21
-#define IRQ_KIRKWOOD_CRYPTO 22
-#define IRQ_KIRKWOOD_SPI 23
-#define IRQ_KIRKWOOD_I2S 24
-#define IRQ_KIRKWOOD_TS_0 26
-#define IRQ_KIRKWOOD_SDIO 28
-#define IRQ_KIRKWOOD_TWSI 29
-#define IRQ_KIRKWOOD_AVB 30
-#define IRQ_KIRKWOOD_TDMI 31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0 33
-#define IRQ_KIRKWOOD_UART_1 34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
-#define IRQ_KIRKWOOD_GE00_ERR 46
-#define IRQ_KIRKWOOD_GE01_ERR 47
-#define IRQ_KIRKWOOD_RTC 53
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START 64
-#define NR_GPIO_IRQS 50
-
-#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
deleted file mode 100644
index 92976cef3910..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000 PCIe #0 Memory space
- * e8000000 PCIe #1 Memory space
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe #0 I/O space
- * f3000000 PCIe #1 I/O space
- * f4000000 NAND controller address window
- * f5000000 Security Accelerator SRAM
- *
- * virt phys size
- * fed00000 f1000000 1M on-chip peripheral registers
- * fee00000 f2000000 1M PCIe #0 I/O space
- * fef00000 f3000000 1M PCIe #1 I/O space
- */
-
-#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
-#define KIRKWOOD_SRAM_SIZE SZ_2K
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
-
-#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
-
-#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
-#define KIRKWOOD_REGS_SIZE SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-
-#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
-#define DDR_WINDOW_CPU_SZ (0x20)
-#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
-#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
-#define BRIDGE_WINS_SZ (0x80)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-#define MV88F6281_REV_A1 3
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-#define MV88F6192_REV_A1 3
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-#define MV88F6180_REV_A1 3
-
-#define MV88F6282_DEV_ID 0x6282
-#define MV88F6282_REV_A0 0
-#define MV88F6282_REV_A1 1
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
deleted file mode 100644
index 5bca5534021f..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
deleted file mode 100644
index 2c47a8ad0e27..000000000000
--- a/arch/arm/mach-kirkwood/irq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/irq.c
- *
- * Kirkwood IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/exception.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/orion-gpio.h>
-#include <plat/irq.h>
-#include "common.h"
-
-static int __initdata gpio0_irqs[4] = {
- IRQ_KIRKWOOD_GPIO_LOW_0_7,
- IRQ_KIRKWOOD_GPIO_LOW_8_15,
- IRQ_KIRKWOOD_GPIO_LOW_16_23,
- IRQ_KIRKWOOD_GPIO_LOW_24_31,
-};
-
-static int __initdata gpio1_irqs[4] = {
- IRQ_KIRKWOOD_GPIO_HIGH_0_7,
- IRQ_KIRKWOOD_GPIO_HIGH_8_15,
- IRQ_KIRKWOOD_GPIO_HIGH_16_23,
- 0,
-};
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
-static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
-
-asmlinkage void
-__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
-{
- u32 stat;
-
- stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
- stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
- if (stat) {
- unsigned int hwirq = __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
- stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
- stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
- if (stat) {
- unsigned int hwirq = 32 + __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
-}
-#endif
-
-void __init kirkwood_init_irq(void)
-{
- orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
- orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
- set_handle_irq(kirkwood_legacy_handle_irq);
-#endif
-
- /*
- * Initialize gpiolib for GPIOs 0-49.
- */
- orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
deleted file mode 100644
index 8e3e4331c380..000000000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
-#include <linux/gpio.h>
-#include <asm/mach/time.h>
-#include <mach/kirkwood.h>
-#include <mach/irqs.h>
-#include <plat/time.h>
-#include "common.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition lacie_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data lacie_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = lacie_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &lacie_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-void __init lacie_v2_register_flash(void)
-{
- spi_register_board_info(lacie_v2_spi_slave_info,
- ARRAY_SIZE(lacie_v2_spi_slave_info));
- kirkwood_spi_init();
-}
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-void __init lacie_v2_register_i2c_devices(void)
-{
- kirkwood_i2c_init();
- i2c_register_board_info(0, lacie_v2_i2c_info,
- ARRAY_SIZE(lacie_v2_i2c_info));
-}
-
-/*****************************************************************************
- * Hard Disk power
- ****************************************************************************/
-
-static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-void __init lacie_v2_hdd_power_init(int hdd_num)
-{
- int i;
- int err;
-
- /* Power up all hard disks. */
- for (i = 0; i < hdd_num; i++) {
- err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
- if (err == 0) {
- err = gpio_direction_output(
- lacie_v2_gpio_hdd_power[i], 1);
- /* Free the HDD power GPIOs. This allow user-space to
- * configure them via the gpiolib sysfs interface. */
- gpio_free(lacie_v2_gpio_hdd_power[i]);
- }
- if (err)
- pr_err("Failed to power up HDD%d\n", i + 1);
- }
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
deleted file mode 100644
index fc64f578536e..000000000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-
-void lacie_v2_register_flash(void);
-void lacie_v2_register_i2c_devices(void);
-void lacie_v2_hdd_power_init(int hdd_num);
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
deleted file mode 100644
index e96fd71abd76..000000000000
--- a/arch/arm/mach-kirkwood/mpp.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mpp.c
- *
- * MPP functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/mpp.h>
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int __init kirkwood_variant(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
- return MPP_F6281_MASK;
- if (dev == MV88F6282_DEV_ID)
- return MPP_F6282_MASK;
- if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
- return MPP_F6192_MASK;
- if (dev == MV88F6180_DEV_ID)
- return MPP_F6180_MASK;
-
- pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
- dev, rev);
- return 0;
-}
-
-void __init kirkwood_mpp_conf(unsigned int *mpp_list)
-{
- orion_mpp_conf(mpp_list, kirkwood_variant(),
- MPP_MAX, DEV_BUS_VIRT_BASE);
-}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
deleted file mode 100644
index d5a0d1da2e0e..000000000000
--- a/arch/arm/mach-kirkwood/mpp.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
- *
- * Copyright 2009: Marvell Technology Group Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __KIRKWOOD_MPP_H
-#define __KIRKWOOD_MPP_H
-
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
- /* MPP number */ ((_num) & 0xff) | \
- /* MPP select value */ (((_sel) & 0xf) << 8) | \
- /* may be input signal */ ((!!(_in)) << 12) | \
- /* may be output signal */ ((!!(_out)) << 13) | \
- /* available on F6180 */ ((!!(_F6180)) << 14) | \
- /* available on F6190 */ ((!!(_F6190)) << 15) | \
- /* available on F6192 */ ((!!(_F6192)) << 16) | \
- /* available on F6281 */ ((!!(_F6281)) << 17) | \
- /* available on F6282 */ ((!!(_F6282)) << 18))
-
- /* num sel i o 6180 6190 6192 6281 6282 */
-
-#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 )
-#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 )
-#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 )
-#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-
-#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP_MAX 49
-
-void kirkwood_mpp_conf(unsigned int *mpp_list);
-
-#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
deleted file mode 100644
index 913d032cdb19..000000000000
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netxbig_v2-setup.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netxbig_v2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
-#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
-#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
-
-#define NETXBIG_V2_SWITCH_POWER_ON 0x1
-#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button netxbig_v2_buttons[] = {
- [0] = {
- .type = EV_SW,
- .code = NETXBIG_V2_SWITCH_POWER_ON,
- .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
- .desc = "Back power switch (on|auto)",
- .active_low = 1,
- },
- [1] = {
- .type = EV_SW,
- .code = NETXBIG_V2_SWITCH_POWER_OFF,
- .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
- .desc = "Back power switch (auto|off)",
- .active_low = 1,
- },
- [2] = {
- .code = KEY_OPTION,
- .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
- .desc = "Function button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data netxbig_v2_button_data = {
- .buttons = netxbig_v2_buttons,
- .nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
-};
-
-static struct platform_device netxbig_v2_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &netxbig_v2_button_data,
- },
-};
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register : bit [0-2] -> GPIO [44-46]
- * - enable register : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
- .addr = netxbig_v2_gpio_ext_addr,
- .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
- .data = netxbig_v2_gpio_ext_data,
- .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
- .enable = 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- * 0 | front LED
- * 1 | front LED brightness
- * 2 | SATA LED brightness
- * 3 | SATA0 LED
- * 4 | SATA1 LED
- * 5 | SATA2 LED
- * 6 | SATA3 LED
- * 7 | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- * 0 | min (off)
- * - | -
- * 7 | max
- *
- * data | front LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | fix blue on
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | SATA activity blink
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 2,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 4,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 1,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 7,
- [NETXBIG_LED_SATA] = 1,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
- [0] = {
- .delay_on = 500,
- .delay_off = 500,
- .mode = NETXBIG_LED_TIMER1,
- },
- [1] = {
- .delay_on = 500,
- .delay_off = 1000,
- .mode = NETXBIG_LED_TIMER2,
- },
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr) \
- { .name = _name, \
- .mode_addr = maddr, \
- .mode_val = mval, \
- .bright_addr = baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
- NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net2big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
- NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net5big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
- .name = "leds-netxbig",
- .id = -1,
- .dev = {
- .platform_data = &net2big_v2_leds_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int net2big_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse alarm */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA HDD1 power */
- MPP17_GPIO, /* SATA HDD2 power */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP24_GPIO, /* USB mode select */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
- MPP34_GPIO, /* Rear Push button */
- MPP35_GPIO, /* Inhibit switch power-off */
- MPP36_GPIO, /* SATA HDD1 presence */
- MPP37_GPIO, /* SATA HDD2 presence */
- MPP40_GPIO, /* eSATA presence */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
- 0
-};
-
-static unsigned int net5big_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse alarm */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA HDD1 power */
- MPP17_GPIO, /* SATA HDD2 power */
- MPP20_GE1_TXD0,
- MPP21_GE1_TXD1,
- MPP22_GE1_TXD2,
- MPP23_GE1_TXD3,
- MPP24_GE1_RXD0,
- MPP25_GE1_RXD1,
- MPP26_GE1_RXD2,
- MPP27_GE1_RXD3,
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
- MPP30_GE1_RXCTL,
- MPP31_GE1_RXCLK,
- MPP32_GE1_TCLKOUT,
- MPP33_GE1_TXCTL,
- MPP34_GPIO, /* Rear Push button */
- MPP35_GPIO, /* Inhibit switch power-off */
- MPP36_GPIO, /* SATA HDD1 presence */
- MPP37_GPIO, /* SATA HDD2 presence */
- MPP38_GPIO, /* SATA HDD3 presence */
- MPP39_GPIO, /* SATA HDD4 presence */
- MPP40_GPIO, /* SATA HDD5 presence */
- MPP41_GPIO, /* SATA HDD3 power */
- MPP42_GPIO, /* SATA HDD4 power */
- MPP43_GPIO, /* SATA HDD5 power */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
- 0
-};
-
-#define NETXBIG_V2_GPIO_POWER_OFF 7
-
-static void netxbig_v2_power_off(void)
-{
- gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netxbig_v2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- if (machine_is_net2big_v2())
- kirkwood_mpp_conf(net2big_v2_mpp_config);
- else
- kirkwood_mpp_conf(net5big_v2_mpp_config);
-
- if (machine_is_net2big_v2())
- lacie_v2_hdd_power_init(2);
- else
- lacie_v2_hdd_power_init(5);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&netxbig_v2_ge00_data);
- if (machine_is_net5big_v2())
- kirkwood_ge01_init(&netxbig_v2_ge01_data);
- kirkwood_sata_init(&netxbig_v2_sata_data);
- kirkwood_uart0_init();
- lacie_v2_register_flash();
- lacie_v2_register_i2c_devices();
-
- if (machine_is_net5big_v2())
- netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
- platform_device_register(&netxbig_v2_leds);
- platform_device_register(&netxbig_v2_gpio_buttons);
-
- if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = netxbig_v2_power_off;
- else
- pr_err("netxbig_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NET2BIG_V2
-MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NET5BIG_V2
-MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
deleted file mode 100644
index e5cf84103583..000000000000
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd-setup.c
- *
- * Marvell OpenRD (Base|Client|Ultimate) Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data openrd_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(24),
-};
-
-static struct mv_sata_platform_data openrd_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
- .gpio_write_protect = -1,
-};
-
-static unsigned int openrd_mpp_config[] __initdata = {
- MPP12_SD_CLK,
- MPP13_SD_CMD,
- MPP14_SD_D0,
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP34_GPIO,
- 0
-};
-
-/* Configure MPP for UART1 */
-static unsigned int openrd_uart1_mpp_config[] __initdata = {
- MPP13_UART1_TXD,
- MPP14_UART1_RXD,
- 0
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("cs42l51", 0x4a),
- },
-};
-
-static struct platform_device openrd_client_audio_device = {
- .name = "openrd-client-audio",
- .id = -1,
-};
-
-static int __initdata uart1;
-
-static int __init sd_uart_selection(char *str)
-{
- uart1 = -EINVAL;
-
- /* Default is SD. Change if required, for UART */
- if (!str)
- return 0;
-
- if (!strncmp(str, "232", 3)) {
- uart1 = 232;
- } else if (!strncmp(str, "485", 3)) {
- /* OpenRD-Base doesn't have RS485. Treat is as an
- * unknown argument & just have default setting -
- * which is SD */
- if (machine_is_openrd_base()) {
- uart1 = -ENODEV;
- return 1;
- }
-
- uart1 = 485;
- }
- return 1;
-}
-/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
-__setup("kw_openrd_init_uart1=", sd_uart_selection);
-
-static int __init uart1_mpp_config(void)
-{
- kirkwood_mpp_conf(openrd_uart1_mpp_config);
-
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- return -EIO;
- }
-
- if (gpio_request(28, "RS232_RS485_SEL")) {
- pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
- gpio_free(34);
- return -EIO;
- }
-
- /* Select UART1
- * Pin # 34: 0 => UART1, 1 => SD */
- gpio_direction_output(34, 0);
-
- /* Select RS232 OR RS485
- * Pin # 28: 0 => RS232, 1 => RS485 */
- if (uart1 == 232)
- gpio_direction_output(28, 0);
- else
- gpio_direction_output(28, 1);
-
- gpio_free(34);
- gpio_free(28);
-
- return 0;
-}
-
-static void __init openrd_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
- 25);
-
- kirkwood_ehci_init();
-
- if (machine_is_openrd_ultimate()) {
- openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
-
- kirkwood_ge00_init(&openrd_ge00_data);
- if (!machine_is_openrd_base())
- kirkwood_ge01_init(&openrd_ge01_data);
-
- kirkwood_sata_init(&openrd_sata_data);
-
- kirkwood_i2c_init();
-
- if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
- platform_device_register(&openrd_client_audio_device);
- i2c_register_board_info(0, i2c_board_info,
- ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
- }
-
- if (uart1 <= 0) {
- if (uart1 < 0)
- pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
-
- /* Select SD
- * Pin # 34: 0 => UART1, 1 => SD */
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- } else {
-
- gpio_direction_output(34, 1);
- gpio_free(34);
- kirkwood_sdio_init(&openrd_mvsdio_data);
- }
- } else {
- if (!uart1_mpp_config())
- kirkwood_uart1_init();
- }
-}
-
-static int __init openrd_pci_init(void)
-{
- if (machine_is_openrd_base() ||
- machine_is_openrd_client() ||
- machine_is_openrd_ultimate())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(openrd_pci_init);
-
-#ifdef CONFIG_MACH_OPENRD_BASE
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_CLIENT
-MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_ULTIMATE
-MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
deleted file mode 100644
index 12d86f39f380..000000000000
--- a/arch/arm/mach-kirkwood/pcie.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/pcie.c
- *
- * PCIe functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/mbus.h>
-#include <video/vga.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
-#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8
-#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0
-#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8
-#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0
-
-static void kirkwood_enable_pcie_clk(const char *port)
-{
- struct clk *clk;
-
- clk = clk_get_sys("pcie", port);
- if (IS_ERR(clk)) {
- pr_err("PCIE clock %s missing\n", port);
- return;
- }
- clk_prepare_enable(clk);
- clk_put(clk);
-}
-
-/* This function is called very early in the boot when probing the
- hardware to determine what we actually are, and what rate tclk is
- ticking at. Hence calling kirkwood_enable_pcie_clk() is not
- possible since the clk tree has not been created yet. */
-void kirkwood_enable_pcie(void)
-{
- u32 curr = readl(CLOCK_GATING_CTRL);
- if (!(curr & CGC_PEX0))
- writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
-}
-
-void kirkwood_pcie_id(u32 *dev, u32 *rev)
-{
- kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
- *rev = orion_pcie_rev(PCIE_VIRT_BASE);
-}
-
-struct pcie_port {
- u8 root_bus_nr;
- void __iomem *base;
- spinlock_t conf_lock;
- int irq;
- struct resource res;
-};
-
-static int pcie_port_map[2];
-static int num_pcie_ports;
-
-static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-{
- /*
- * Don't go out when trying to access --
- * 1. nonexisting device on local bus
- * 2. where there's no device connected (no link)
- */
- if (bus == pp->root_bus_nr && dev == 0)
- return 1;
-
- if (!orion_pcie_link_up(pp->base))
- return 0;
-
- if (bus == pp->root_bus_nr && dev != 1)
- return 0;
-
- return 1;
-}
-
-
-/*
- * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
- int size, u32 *val)
-{
- struct pci_sys_data *sys = bus->sysdata;
- struct pcie_port *pp = sys->private_data;
- unsigned long flags;
- int ret;
-
- if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- spin_lock_irqsave(&pp->conf_lock, flags);
- ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
- spin_unlock_irqrestore(&pp->conf_lock, flags);
-
- return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
- int where, int size, u32 val)
-{
- struct pci_sys_data *sys = bus->sysdata;
- struct pcie_port *pp = sys->private_data;
- unsigned long flags;
- int ret;
-
- if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- spin_lock_irqsave(&pp->conf_lock, flags);
- ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
- spin_unlock_irqrestore(&pp->conf_lock, flags);
-
- return ret;
-}
-
-static struct pci_ops pcie_ops = {
- .read = pcie_rd_conf,
- .write = pcie_wr_conf,
-};
-
-static void __init pcie0_ioresources_init(struct pcie_port *pp)
-{
- pp->base = PCIE_VIRT_BASE;
- pp->irq = IRQ_KIRKWOOD_PCIE;
-
- /*
- * IORESOURCE_MEM
- */
- pp->res.name = "PCIe 0 MEM";
- pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
- pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
- pp->res.flags = IORESOURCE_MEM;
-}
-
-static void __init pcie1_ioresources_init(struct pcie_port *pp)
-{
- pp->base = PCIE1_VIRT_BASE;
- pp->irq = IRQ_KIRKWOOD_PCIE1;
-
- /*
- * IORESOURCE_MEM
- */
- pp->res.name = "PCIe 1 MEM";
- pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
- pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
- pp->res.flags = IORESOURCE_MEM;
-}
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct pcie_port *pp;
- int index;
-
- if (nr >= num_pcie_ports)
- return 0;
-
- index = pcie_port_map[nr];
- pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
-
- pp = kzalloc(sizeof(*pp), GFP_KERNEL);
- if (!pp)
- panic("PCIe: failed to allocate pcie_port data");
- sys->private_data = pp;
- pp->root_bus_nr = sys->busnr;
- spin_lock_init(&pp->conf_lock);
-
- switch (index) {
- case 0:
- kirkwood_enable_pcie_clk("0");
- pcie0_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
- break;
- case 1:
- kirkwood_enable_pcie_clk("1");
- pcie1_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr,
- KIRKWOOD_PCIE1_IO_PHYS_BASE);
- break;
- default:
- panic("PCIe setup: invalid controller %d", index);
- }
-
- if (request_resource(&iomem_resource, &pp->res))
- panic("Request PCIe%d Memory resource failed\n", index);
-
- pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
-
- /*
- * Generic PCIe unit setup.
- */
- orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-
- orion_pcie_setup(pp->base);
-
- return 1;
-}
-
-/*
- * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
- * is operating as a root complex this needs to be switched to
- * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
- * the device. Decoding setup is handled by the orion code.
- */
-static void rc_pci_fixup(struct pci_dev *dev)
-{
- if (dev->bus->parent == NULL && dev->devfn == 0) {
- int i;
-
- dev->class &= 0xff;
- dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- struct pci_sys_data *sys = dev->sysdata;
- struct pcie_port *pp = sys->private_data;
-
- return pp->irq;
-}
-
-static struct hw_pci kirkwood_pci __initdata = {
- .setup = kirkwood_pcie_setup,
- .map_irq = kirkwood_pcie_map_irq,
- .ops = &pcie_ops,
-};
-
-static void __init add_pcie_port(int index, void __iomem *base)
-{
- pcie_port_map[num_pcie_ports++] = index;
- pr_info("Kirkwood PCIe port %d: link %s\n", index,
- orion_pcie_link_up(base) ? "up" : "down");
-}
-
-void __init kirkwood_pcie_init(unsigned int portmask)
-{
- mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
- KIRKWOOD_MBUS_PCIE0_IO_ATTR,
- KIRKWOOD_PCIE_IO_PHYS_BASE,
- KIRKWOOD_PCIE_IO_SIZE,
- KIRKWOOD_PCIE_IO_BUS_BASE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
- KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
- KIRKWOOD_PCIE_MEM_PHYS_BASE,
- KIRKWOOD_PCIE_MEM_SIZE);
- mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
- KIRKWOOD_MBUS_PCIE1_IO_ATTR,
- KIRKWOOD_PCIE1_IO_PHYS_BASE,
- KIRKWOOD_PCIE1_IO_SIZE,
- KIRKWOOD_PCIE1_IO_BUS_BASE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
- KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
- KIRKWOOD_PCIE1_MEM_PHYS_BASE,
- KIRKWOOD_PCIE1_MEM_SIZE);
-
- vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-
- if (portmask & KW_PCIE0)
- add_pcie_port(0, PCIE_VIRT_BASE);
-
- if (portmask & KW_PCIE1)
- add_pcie_port(1, PCIE1_VIRT_BASE);
-
- kirkwood_pci.nr_controllers = num_pcie_ports;
- pci_common_init(&kirkwood_pci);
-}
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
deleted file mode 100644
index 8e5e0329d04c..000000000000
--- a/arch/arm/mach-kirkwood/pm.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Power Management driver for Marvell Kirkwood SoCs
- *
- * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License,
- * version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-static void __iomem *ddr_operation_base;
-static void __iomem *memory_pm_ctrl;
-
-static void kirkwood_low_power(void)
-{
- u32 mem_pm_ctrl;
-
- mem_pm_ctrl = readl(memory_pm_ctrl);
-
- /* Set peripherals to low-power mode */
- writel_relaxed(~0, memory_pm_ctrl);
-
- /* Set DDR in self-refresh */
- writel_relaxed(0x7, ddr_operation_base);
-
- /*
- * Set CPU in wait-for-interrupt state.
- * This disables the CPU core clocks,
- * the array clocks, and also the L2 controller.
- */
- cpu_do_idle();
-
- writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
-}
-
-static int kirkwood_suspend_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- kirkwood_low_power();
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int kirkwood_pm_valid_standby(suspend_state_t state)
-{
- return state == PM_SUSPEND_STANDBY;
-}
-
-static const struct platform_suspend_ops kirkwood_suspend_ops = {
- .enter = kirkwood_suspend_enter,
- .valid = kirkwood_pm_valid_standby,
-};
-
-void __init kirkwood_pm_init(void)
-{
- ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
- memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
-
- suspend_set_ops(&kirkwood_suspend_ops);
-}
diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
deleted file mode 100644
index 21e7530f368b..000000000000
--- a/arch/arm/mach-kirkwood/pm.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Power Management driver for Marvell Kirkwood SoCs
- *
- * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License,
- * version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_KIRKWOOD_PM_H
-#define __ARCH_KIRKWOOD_PM_H
-
-#ifdef CONFIG_PM
-void kirkwood_pm_init(void);
-#else
-static inline void kirkwood_pm_init(void) {};
-#endif
-
-#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
deleted file mode 100644
index e4fd3129d36f..000000000000
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
- *
- * Marvell RD-88F6192-NAS Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-
-#define RD88F6192_GPIO_USB_VBUS 10
-
-static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data rd88f6192_sata_data = {
- .n_ports = 2,
-};
-
-static const struct flash_platform_data rd88F6192_spi_slave_data = {
- .type = "m25p128",
-};
-
-static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &rd88F6192_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static void __init rd88f6192_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
-
- orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
- if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
- gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
- pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&rd88f6192_ge00_data);
- kirkwood_sata_init(&rd88f6192_sata_data);
- spi_register_board_info(rd88F6192_spi_slave_info,
- ARRAY_SIZE(rd88F6192_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_uart0_init();
-}
-
-static int __init rd88f6192_pci_init(void)
-{
- if (machine_is_rd88f6192_nas())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(rd88f6192_pci_init);
-
-MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
- /* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = rd88f6192_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
deleted file mode 100644
index 5154bd2a3ad3..000000000000
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6281-setup.c
- *
- * Marvell RD-88F6281 Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition rd88f6281_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6281_switch_chip_data = {
- .port_names[0] = "lan1",
- .port_names[1] = "lan2",
- .port_names[2] = "lan3",
- .port_names[3] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data rd88f6281_switch_plat_data = {
- .nr_chips = 1,
- .chip = &rd88f6281_switch_chip_data,
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data rd88f6281_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
- .gpio_card_detect = 28,
- .gpio_write_protect = -1,
-};
-
-static unsigned int rd88f6281_mpp_config[] __initdata = {
- MPP28_GPIO,
- 0
-};
-
-static void __init rd88f6281_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(rd88f6281_mpp_config);
-
- kirkwood_nand_init(rd88f6281_nand_parts,
- ARRAY_SIZE(rd88f6281_nand_parts),
- 25);
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&rd88f6281_ge00_data);
- kirkwood_pcie_id(&dev, &rev);
- if (rev == MV88F6281_REV_A0) {
- rd88f6281_switch_chip_data.sw_addr = 10;
- kirkwood_ge01_init(&rd88f6281_ge01_data);
- } else {
- rd88f6281_switch_chip_data.port_names[4] = "wan";
- }
- kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
-
- kirkwood_sata_init(&rd88f6281_sata_data);
- kirkwood_sdio_init(&rd88f6281_mvsdio_data);
- kirkwood_uart0_init();
-}
-
-static int __init rd88f6281_pci_init(void)
-{
- if (machine_is_rd88f6281())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(rd88f6281_pci_init);
-
-MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
- /* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = rd88f6281_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
deleted file mode 100644
index 8736f8c97518..000000000000
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *
- * HP t5325 Thin Client setup
- *
- * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <sound/alc5623.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition hp_t5325_partitions[] = {
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_256K,
- },
- {
- .name = "permanent u-boot env",
- .size = SZ_64K,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "HP env",
- .size = SZ_64K,
- .offset = MTDPART_OFS_APPEND,
- },
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "SSD firmware",
- .size = SZ_256K,
- .offset = SZ_512K,
- },
-};
-
-static const struct flash_platform_data hp_t5325_flash = {
- .type = "mx25l8005",
- .name = "spi_flash",
- .parts = hp_t5325_partitions,
- .nr_parts = ARRAY_SIZE(hp_t5325_partitions),
-};
-
-static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &hp_t5325_flash,
- .irq = -1,
- },
-};
-
-static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data hp_t5325_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button hp_t5325_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = 45,
- .desc = "Power",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data hp_t5325_button_data = {
- .buttons = hp_t5325_buttons,
- .nbuttons = ARRAY_SIZE(hp_t5325_buttons),
-};
-
-static struct platform_device hp_t5325_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &hp_t5325_button_data,
- }
-};
-
-static struct platform_device hp_t5325_audio_device = {
- .name = "t5325-audio",
- .id = -1,
-};
-
-static unsigned int hp_t5325_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_SPI_SCn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_SD_CLK,
- MPP13_GPIO,
- MPP14_GPIO,
- MPP15_GPIO,
- MPP16_GPIO,
- MPP17_GPIO,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_GPIO,
- MPP21_GPIO,
- MPP22_GPIO,
- MPP23_GPIO,
- MPP32_GPIO,
- MPP33_GE1_TXCTL,
- MPP39_AU_I2SBCLK,
- MPP40_AU_I2SDO,
- MPP43_AU_I2SDI,
- MPP41_AU_I2SLRCLK,
- MPP42_AU_I2SMCLK,
- MPP45_GPIO, /* Power button */
- MPP48_GPIO, /* Board power off */
- 0
-};
-
-static struct alc5623_platform_data alc5621_data = {
- .add_ctrl = 0x3700,
- .jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("alc5621", 0x1a),
- .platform_data = &alc5621_data,
- },
-};
-
-#define HP_T5325_GPIO_POWER_OFF 48
-
-static void hp_t5325_power_off(void)
-{
- gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
-}
-
-static void __init hp_t5325_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(hp_t5325_mpp_config);
-
- kirkwood_uart0_init();
- spi_register_board_info(hp_t5325_spi_slave_info,
- ARRAY_SIZE(hp_t5325_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- kirkwood_ge00_init(&hp_t5325_ge00_data);
- kirkwood_sata_init(&hp_t5325_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&hp_t5325_button_device);
- platform_device_register(&hp_t5325_audio_device);
-
- i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
-
- if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = hp_t5325_power_off;
- else
- pr_err("t5325: failed to configure power-off GPIO\n");
-}
-
-static int __init hp_t5325_pci_init(void)
-{
- if (machine_is_t5325())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(hp_t5325_pci_init);
-
-MACHINE_START(T5325, "HP t5325 Thin Client")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = hp_t5325_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
deleted file mode 100644
index e1267d6b468f..000000000000
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup
- *
- * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data qnap_ts219_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button qnap_ts219_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 15,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 16,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data qnap_ts219_button_data = {
- .buttons = qnap_ts219_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
-};
-
-static struct platform_device qnap_ts219_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &qnap_ts219_button_data,
- }
-};
-
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_SATA1_ACTn,
- MPP5_SATA0_ACTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
- MPP16_GPIO, /* Reset button (on devices with 88F6281) */
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button (on devices with 88F6282) */
- MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
- MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
- 0
-};
-
-static void __init qnap_ts219_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_uart1_init(); /* A PIC controller is connected here. */
- qnap_tsx1x_register_flash();
- kirkwood_i2c_init();
- i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID) {
- qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
- qnap_ts219_buttons[1].gpio = 37; /* Reset button */
- qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- }
-
- kirkwood_ge00_init(&qnap_ts219_ge00_data);
- kirkwood_sata_init(&qnap_ts219_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&qnap_ts219_button_device);
-
- pm_power_off = qnap_tsx1x_power_off;
-
-}
-
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
-
-MACHINE_START(TS219, "QNAP TS-119/TS-219")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = qnap_ts219_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
deleted file mode 100644
index 81d585806b2f..000000000000
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *
- * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
- *
- * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-/* for the PCIe reset workaround */
-#include <plat/pcie.h>
-
-
-#define QNAP_TS41X_JUMPER_JP1 45
-
-static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data qnap_ts41x_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button qnap_ts41x_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 43,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 37,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data qnap_ts41x_button_data = {
- .buttons = qnap_ts41x_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
-};
-
-static struct platform_device qnap_ts41x_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &qnap_ts41x_button_data,
- }
-};
-
-static unsigned int qnap_ts41x_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_PEX_RST_OUTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_SATA0_ACTn,
- MPP16_SATA1_ACTn,
- MPP20_GE1_TXD0,
- MPP21_GE1_TXD1,
- MPP22_GE1_TXD2,
- MPP23_GE1_TXD3,
- MPP24_GE1_RXD0,
- MPP25_GE1_RXD1,
- MPP26_GE1_RXD2,
- MPP27_GE1_RXD3,
- MPP30_GE1_RXCTL,
- MPP31_GE1_RXCLK,
- MPP32_GE1_TCLKOUT,
- MPP33_GE1_TXCTL,
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button */
- MPP43_GPIO, /* USB Copy button */
- MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
- MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */
- MPP46_GPIO, /* External SATA HDD1 error indicator */
- MPP47_GPIO, /* External SATA HDD2 error indicator */
- MPP48_GPIO, /* External SATA HDD3 error indicator */
- MPP49_GPIO, /* External SATA HDD4 error indicator */
- 0
-};
-
-static void __init qnap_ts41x_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(qnap_ts41x_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_uart1_init(); /* A PIC controller is connected here. */
- qnap_tsx1x_register_flash();
- kirkwood_i2c_init();
- i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID) {
- qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
- kirkwood_ge00_init(&qnap_ts41x_ge00_data);
- kirkwood_ge01_init(&qnap_ts41x_ge01_data);
-
- kirkwood_sata_init(&qnap_ts41x_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&qnap_ts41x_button_device);
-
- pm_power_off = qnap_tsx1x_power_off;
-
- if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
- gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
-}
-
-static int __init ts41x_pci_init(void)
-{
- if (machine_is_ts41x()) {
- u32 dev, rev;
-
- /*
- * Without this explicit reset, the PCIe SATA controller
- * (Marvell 88sx7042/sata_mv) is known to stop working
- * after a few minutes.
- */
- orion_pcie_reset(PCIE_VIRT_BASE);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
- else
- kirkwood_pcie_init(KW_PCIE0);
- }
- return 0;
-}
-subsys_initcall(ts41x_pci_init);
-
-MACHINE_START(TS41X, "QNAP TS-41x")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = qnap_ts41x_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
deleted file mode 100644
index cec87cef76ca..000000000000
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "tsx1x-common.h"
-
-/*
- * QNAP TS-x1x Boards flash
- */
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatibility with
- * the QNAP firmware.
- * Layout as used by QNAP:
- * 0x00000000-0x00080000 : "U-Boot"
- * 0x00200000-0x00400000 : "Kernel"
- * 0x00400000-0x00d00000 : "RootFS"
- * 0x00d00000-0x01000000 : "RootFS2"
- * 0x00080000-0x000c0000 : "U-Boot Config"
- * 0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_tsx1x_partitions[] = {
- {
- .name = "U-Boot",
- .size = 0x00080000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00200000,
- }, {
- .name = "RootFS1",
- .size = 0x00900000,
- .offset = 0x00400000,
- }, {
- .name = "RootFS2",
- .size = 0x00300000,
- .offset = 0x00d00000,
- }, {
- .name = "U-Boot Config",
- .size = 0x00040000,
- .offset = 0x00080000,
- }, {
- .name = "NAS Config",
- .size = 0x00140000,
- .offset = 0x000c0000,
- },
-};
-
-static const struct flash_platform_data qnap_tsx1x_flash = {
- .type = "m25p128",
- .name = "spi_flash",
- .parts = qnap_tsx1x_partitions,
- .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
-};
-
-static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &qnap_tsx1x_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-void __init qnap_tsx1x_register_flash(void)
-{
- spi_register_board_info(qnap_tsx1x_spi_slave_info,
- ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
- kirkwood_spi_init();
-}
-
-
-/*****************************************************************************
- * QNAP TS-x1x specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_tsx1x_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack UART1 and reset into sane state (19200,8n1) */
- writel(0x83, UART1_REG(LCR));
- writel(divisor & 0xff, UART1_REG(DLL));
- writel((divisor >> 8) & 0xff, UART1_REG(DLM));
- writel(0x03, UART1_REG(LCR));
- writel(0x00, UART1_REG(IER));
- writel(0x00, UART1_REG(FCR));
- writel(0x00, UART1_REG(MCR));
-
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
-}
-
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
deleted file mode 100644
index 7fa037361b55..000000000000
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
-#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
-
-extern void __init qnap_tsx1x_register_flash(void);
-extern void qnap_tsx1x_power_off(void);
-
-#endif
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
new file mode 100644
index 000000000000..2c043a210db0
--- /dev/null
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -0,0 +1,6 @@
+config ARCH_MEDIATEK
+ bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7
+ select ARM_GIC
+ select MTK_TIMER
+ help
+ Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589.
diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
new file mode 100644
index 000000000000..43e619f56172
--- /dev/null
+++ b/arch/arm/mach-mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-mediatek/mediatek.c
index 201842a3769e..f2acf075350d 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -1,6 +1,8 @@
/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
+ * Device Tree support for Mediatek SoCs
+ *
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,16 +13,15 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/init.h>
+#include <asm/mach/arch.h>
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
+static const char * const mediatek_board_dt_compat[] = {
+ "mediatek,mt6589",
+ NULL,
+};
-#endif /* __MACH_DMA_H */
+DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
+ .dt_compat = mediatek_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index b9bc599a5fd0..955d4a3afabd 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -96,4 +96,11 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
+config MACH_NETXBIG
+ bool "LaCie 2Big and 5Big Network v2"
+ depends on MACH_KIRKWOOD
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big and 5Big Network v2
+
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 1636cdbef01a..bc7689e530a4 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -9,8 +9,8 @@ obj-y += system-controller.o mvebu-soc-id.o
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
endif
obj-$(CONFIG_MACH_DOVE) += dove.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
+obj-$(CONFIG_MACH_NETXBIG) += netxbig.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index c3465f5b1250..52c1603a4f92 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -24,4 +24,7 @@ void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
+void armada_370_xp_pmsu_idle_exit(void);
+
#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index b2524d689f21..f244622ffc00 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -125,8 +125,16 @@ static void __init thermal_quirk(void)
{
struct device_node *np;
u32 dev, rev;
+ int res;
- if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+ /*
+ * The early SoC Z1 revision needs a quirk to be applied in order
+ * for the thermal controller to work properly. This quirk breaks
+ * the thermal support if applied on a SoC that doesn't need it,
+ * so we enforce the SoC revision to be known.
+ */
+ res = mvebu_get_soc_id(&dev, &rev);
+ if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
return;
for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
@@ -160,7 +168,8 @@ static void __init thermal_quirk(void)
/*
* The thermal controller needs some quirk too, so let's change
- * the compatible string to reflect this.
+ * the compatible string to reflect this and allow the driver
+ * the take the necessary action.
*/
prop = kzalloc(sizeof(*prop), GFP_KERNEL);
prop->name = kstrdup("compatible", GFP_KERNEL);
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
index 9c7bb4386f8b..98e32cc2ef3d 100644
--- a/arch/arm/mach-mvebu/board.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -13,4 +13,9 @@
#ifndef __ARCH_MVEBU_BOARD_H
#define __ARCH_MVEBU_BOARD_H
+#ifdef CONFIG_MACH_NETXBIG
+void netxbig_init(void);
+#else
+static inline void netxbig_init(void) {};
+#endif
#endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 477202fd39cc..2bdc3233abe2 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -292,6 +292,10 @@ static struct notifier_block mvebu_hwcc_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
+static struct notifier_block mvebu_hwcc_pci_nb = {
+ .notifier_call = mvebu_hwcc_notifier,
+};
+
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
@@ -427,7 +431,7 @@ static int __init coherency_pci_init(void)
{
if (coherency_available())
bus_register_notifier(&pci_bus_type,
- &mvebu_hwcc_nb);
+ &mvebu_hwcc_pci_nb);
return 0;
}
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index b67fb7a10d8b..a97778e28bf6 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -21,7 +21,6 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd);
int mvebu_cpu_reset_deassert(int cpu);
void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr);
-
-void armada_xp_cpu_die(unsigned int cpu);
+int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
#endif
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index 4a8f9eebebea..60fb53787004 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -67,7 +67,7 @@ static int mvebu_cpu_reset_map(struct device_node *np, int res_idx)
return 0;
}
-int __init mvebu_cpu_reset_init(void)
+static int __init mvebu_cpu_reset_init(void)
{
struct device_node *np;
int res_idx;
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
index 5925366bc03c..da5bb292b91c 100644
--- a/arch/arm/mach-mvebu/headsmp-a9.S
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -15,6 +15,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/assembler.h>
+
__CPUINIT
#define CPU_RESUME_ADDR_REG 0xf10182d4
@@ -22,13 +24,18 @@
.global armada_375_smp_cpu1_enable_code_end
armada_375_smp_cpu1_enable_code_start:
- ldr r0, [pc, #4]
+ARM_BE8(setend be)
+ adr r0, 1f
+ ldr r0, [r0]
ldr r1, [r0]
+ARM_BE8(rev r1, r1)
mov pc, r1
+1:
.word CPU_RESUME_ADDR_REG
armada_375_smp_cpu1_enable_code_end:
ENTRY(mvebu_cortex_a9_secondary_startup)
+ARM_BE8(setend be)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/hotplug.c b/arch/arm/mach-mvebu/hotplug.c
deleted file mode 100644
index d95e91047168..000000000000
--- a/arch/arm/mach-mvebu/hotplug.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Symmetric Multi Processing (SMP) support for Armada XP
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <asm/proc-fns.h>
-#include "common.h"
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref armada_xp_cpu_die(unsigned int cpu)
-{
- cpu_do_idle();
-
- /* We should never return from idle */
- panic("mvebu: cpu %d unexpectedly exit from shutdown\n", cpu);
-}
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 46f105913c84..6b5310828eb2 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -180,6 +180,9 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
+ if (of_machine_is_compatible("lacie,netxbig"))
+ netxbig_init();
+
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index d0f35b4d4a23..a99434bcee84 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -25,6 +25,7 @@
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
+#include "common.h"
#include "mvebu-soc-id.h"
#define PCIE_DEV_ID_OFF 0x0
@@ -51,10 +52,10 @@ int mvebu_get_soc_id(u32 *dev, u32 *rev)
*rev = soc_rev;
return 0;
} else
- return -1;
+ return -ENODEV;
}
-static int __init mvebu_soc_id_init(void)
+static int __init get_soc_id_by_pci(void)
{
struct device_node *np;
int ret = 0;
@@ -129,6 +130,22 @@ clk_err:
return ret;
}
+
+static int __init mvebu_soc_id_init(void)
+{
+
+ /*
+ * First try to get the ID and the revision by the system
+ * register and use PCI registers only if it is not possible
+ */
+ if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) {
+ is_id_valid = true;
+ pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
+ return 0;
+ }
+
+ return get_soc_id_by_pci();
+}
early_initcall(mvebu_soc_id_init);
static int __init mvebu_soc_device(void)
diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
new file mode 100644
index 000000000000..94b11b6585a4
--- /dev/null
+++ b/arch/arm/mach-mvebu/netxbig.c
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-mvbu/board-netxbig.c
+ *
+ * LaCie 2Big and 5Big Network v2 board setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
+#include "common.h"
+
+/*****************************************************************************
+ * GPIO extension LEDs
+ ****************************************************************************/
+
+/*
+ * The LEDs are controlled by a CPLD and can be configured through a GPIO
+ * extension bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register : bit [0-2] -> GPIO [44-46]
+ * - enable register : GPIO 29
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+ .addr = netxbig_v2_gpio_ext_addr,
+ .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+ .data = netxbig_v2_gpio_ext_data,
+ .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+ .enable = 29,
+};
+
+/*
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ * 0 | front LED
+ * 1 | front LED brightness
+ * 2 | SATA LED brightness
+ * 3 | SATA0 LED
+ * 4 | SATA1 LED
+ * 5 | SATA2 LED
+ * 6 | SATA3 LED
+ * 7 | SATA4 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ * 0 | min (off)
+ * - | -
+ * 7 | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | fix blue on
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | SATA LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | SATA activity blink
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | fix blue on
+ */
+
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 2,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 4,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 1,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = 7,
+};
+
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 7,
+ [NETXBIG_LED_SATA] = 1,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+ [0] = {
+ .delay_on = 500,
+ .delay_off = 500,
+ .mode = NETXBIG_LED_TIMER1,
+ },
+ [1] = {
+ .delay_on = 500,
+ .delay_off = 1000,
+ .mode = NETXBIG_LED_TIMER2,
+ },
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr) \
+ { .name = _name, \
+ .mode_addr = maddr, \
+ .mode_val = mval, \
+ .bright_addr = baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net2big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net5big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+ .name = "leds-netxbig",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_v2_leds_data,
+ },
+};
+
+void __init netxbig_init(void)
+{
+
+ if (of_machine_is_compatible("lacie,net5big_v2"))
+ netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+ platform_device_register(&netxbig_v2_leds);
+}
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 96c2c59e34b6..43aaf3fa75ee 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -33,7 +33,7 @@
extern unsigned char armada_375_smp_cpu1_enable_code_end;
extern unsigned char armada_375_smp_cpu1_enable_code_start;
-void armada_375_smp_cpu1_enable_wa(void)
+static void armada_375_smp_cpu1_enable_wa(void)
{
void __iomem *sram_virt_base;
@@ -91,9 +91,6 @@ static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
.smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = armada_xp_cpu_die,
-#endif
};
CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 88b976b31719..b6fa9f0c98b8 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -78,6 +78,17 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
hw_cpu = cpu_logical_map(cpu);
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
+
+ /*
+ * This is needed to wake up CPUs in the offline state after
+ * using CPU hotplug.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * This is needed to take secondary CPUs out of reset on the
+ * initial boot.
+ */
ret = mvebu_cpu_reset_deassert(hw_cpu);
if (ret) {
pr_warn("unable to boot CPU: %d\n", ret);
@@ -87,6 +98,19 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
return 0;
}
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_xp_cpu_die()
+ * below.
+ */
+static void armada_xp_secondary_init(unsigned int cpu)
+{
+ armada_370_xp_pmsu_idle_exit();
+}
+
static void __init armada_xp_smp_init_cpus(void)
{
unsigned int ncores = num_possible_cpus();
@@ -122,12 +146,36 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
panic("The address for the BootROM is incorrect");
}
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_xp_cpu_die(unsigned int cpu)
+{
+ /*
+ * CPU hotplug is implemented by putting offline CPUs into the
+ * deep idle sleep state.
+ */
+ armada_370_xp_pmsu_idle_enter(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_xp_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+#endif
+
struct smp_operations armada_xp_smp_ops __initdata = {
.smp_init_cpus = armada_xp_smp_init_cpus,
.smp_prepare_cpus = armada_xp_smp_prepare_cpus,
.smp_boot_secondary = armada_xp_boot_secondary,
+ .smp_secondary_init = armada_xp_secondary_init,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = armada_xp_cpu_die,
+ .cpu_kill = armada_xp_cpu_kill,
#endif
};
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index a1d407c0febe..b31a8293a347 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -143,13 +143,13 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void)
}
/* No locking is needed because we only access per-CPU registers */
-void armada_370_xp_pmsu_idle_prepare(bool deepidle)
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
{
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
u32 reg;
if (pmsu_mp_base == NULL)
- return;
+ return -EINVAL;
/*
* Adjust the PMSU configuration to wait for WFI signal, enable
@@ -178,11 +178,6 @@ void armada_370_xp_pmsu_idle_prepare(bool deepidle)
reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
-}
-
-static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
-{
- armada_370_xp_pmsu_idle_prepare(deepidle);
v7_exit_coherency_flush(all);
@@ -201,12 +196,12 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
- "mrc p15, 0, %0, c1, c0, 0 \n\t"
- "tst %0, #(1 << 2) \n\t"
- "orreq %0, %0, #(1 << 2) \n\t"
- "mcreq p15, 0, %0, c1, c0, 0 \n\t"
+ "mrc p15, 0, r0, c1, c0, 0 \n\t"
+ "tst r0, #(1 << 2) \n\t"
+ "orreq r0, r0, #(1 << 2) \n\t"
+ "mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
- : : "r" (0));
+ : : : "r0");
pr_warn("Failed to suspend the system\n");
@@ -215,11 +210,11 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
static int armada_370_xp_cpu_suspend(unsigned long deepidle)
{
- return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend);
+ return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
}
/* No locking is needed because we only access per-CPU registers */
-static noinline void armada_370_xp_pmsu_idle_restore(void)
+void armada_370_xp_pmsu_idle_exit(void)
{
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
u32 reg;
@@ -248,7 +243,7 @@ static int armada_370_xp_cpu_pm_notify(struct notifier_block *self,
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume);
} else if (action == CPU_PM_EXIT) {
- armada_370_xp_pmsu_idle_restore();
+ armada_370_xp_pmsu_idle_exit();
}
return NOTIFY_OK;
@@ -258,7 +253,7 @@ static struct notifier_block armada_370_xp_cpu_pm_notifier = {
.notifier_call = armada_370_xp_cpu_pm_notify,
};
-int __init armada_370_xp_cpu_pm_init(void)
+static int __init armada_370_xp_cpu_pm_init(void)
{
struct device_node *np;
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 0c5524ac75b7..b2b4e3d6558c 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -39,6 +39,9 @@ struct mvebu_system_controller {
u32 system_soft_reset;
u32 resume_boot_addr;
+
+ u32 dev_id;
+ u32 rev_id;
};
static struct mvebu_system_controller *mvebu_sc;
@@ -47,6 +50,8 @@ static const struct mvebu_system_controller armada_370_xp_system_controller = {
.system_soft_reset_offset = 0x64,
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
+ .dev_id = 0x38,
+ .rev_id = 0x3c,
};
static const struct mvebu_system_controller armada_375_system_controller = {
@@ -55,6 +60,8 @@ static const struct mvebu_system_controller armada_375_system_controller = {
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
.resume_boot_addr = 0xd4,
+ .dev_id = 0x38,
+ .rev_id = 0x3c,
};
static const struct mvebu_system_controller orion_system_controller = {
@@ -101,6 +108,18 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd)
;
}
+int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev)
+{
+ if (of_machine_is_compatible("marvell,armada380") &&
+ system_controller_base) {
+ *dev = readl(system_controller_base + mvebu_sc->dev_id) >> 16;
+ *rev = (readl(system_controller_base + mvebu_sc->rev_id) >> 8)
+ & 0xF;
+ return 0;
+ } else
+ return -ENODEV;
+}
+
#ifdef CONFIG_SMP
void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr)
{
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8ca99e9321e3..863ec46e84a7 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -202,6 +202,7 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
+obj-y += omap_hwmod_common_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 67fd26a18441..b2ff6cd7ca9f 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,10 +21,7 @@
#include <asm/div64.h>
-#include "soc.h"
#include "clock.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 2
@@ -44,20 +41,12 @@
#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
-#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
-#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
-#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
-
/*
* DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
* From device data manual section 4.3 "DPLL and DLL Specifications".
*/
#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-#define OMAP3PLUS_DPLL_FINT_MIN 32000
-#define OMAP3PLUS_DPLL_FINT_MAX 52000000
/* _dpll_test_fint() return codes */
#define DPLL_FINT_UNDERFLOW -1
@@ -87,33 +76,31 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
/* DPLL divider must result in a valid jitter correction val */
fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
- if (cpu_is_omap24xx()) {
- /* Should not be called for OMAP2, so warn if it is called */
- WARN(1, "No fint limits available for OMAP2!\n");
- return DPLL_FINT_INVALID;
- } else if (cpu_is_omap3430()) {
- fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- } else if (dd->flags & DPLL_J_TYPE) {
+ if (dd->flags & DPLL_J_TYPE) {
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ fint_min = ti_clk_features.fint_min;
+ fint_max = ti_clk_features.fint_max;
}
- if (fint < fint_min) {
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_features.fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > fint_max) {
+ } else if (fint > ti_clk_features.fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
- fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+ } else if (fint > ti_clk_features.fint_band1_max &&
+ fint < ti_clk_features.fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -185,6 +172,34 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
return r;
}
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_features.dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
/* Public functions */
u8 omap2_init_dpll_parent(struct clk_hw *hw)
{
@@ -201,20 +216,9 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
v >>= __ffs(dd->enable_mask);
/* Reparent the struct clk in case the dpll is in bypass */
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return 1;
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return 1;
- } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return 1;
- }
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
return 0;
}
@@ -247,20 +251,8 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
v &= dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- }
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
v = omap2_clk_readl(clk, dd->mult_div1_reg);
dpll_mult = v & dd->mult_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 333f0a666171..55eb579aeae1 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,11 +14,11 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
-
#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+
+/* Register offsets */
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
/* Private functions */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 591581a66532..5a0cac93d9ec 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -47,6 +47,24 @@
u16 cpu_mask;
/*
+ * Clock features setup. Used instead of CPU type checks.
+ */
+struct ti_clk_features ti_clk_features;
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_MIN 32000
+#define OMAP3PLUS_DPLL_FINT_MAX 52000000
+
+/*
* clkdm_control: if true, then when a clock is enabled in the
* hardware, its clockdomain will first be enabled; and when a clock
* is disabled in the hardware, its clockdomain will be disabled
@@ -287,13 +305,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- if (cpu_is_omap24xx())
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
- else if (cpu_is_omap34xx())
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
- else
- BUG();
-
+ *idlest_val = ti_clk_features.cm_idlest_val;
}
/**
@@ -731,3 +743,53 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
+
+/**
+ * ti_clk_init_features - init clock features struct for the SoC
+ *
+ * Initializes the clock features struct based on the SoC type.
+ */
+void __init ti_clk_init_features(void)
+{
+ /* Fint setup for DPLLs */
+ if (cpu_is_omap3430()) {
+ ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ } else {
+ ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ }
+
+ /* Bypass value setup for DPLLs */
+ if (cpu_is_omap24xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP2XXX_EN_DPLL_FRBYPASS);
+ } else if (cpu_is_omap34xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP3XXX_EN_DPLL_FRBYPASS);
+ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
+ soc_is_omap54xx() || soc_is_dra7xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
+ (1 << OMAP4XXX_EN_DPLL_MNBYPASS);
+ }
+
+ /* Jitter correction only available on OMAP343X */
+ if (cpu_is_omap343x())
+ ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+
+ /* Idlest value for interface clocks.
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ if (cpu_is_omap24xx())
+ ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ else if (cpu_is_omap34xx())
+ ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 12f54d428d7c..0f100dc4e97f 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -101,31 +101,6 @@ struct clockdomain;
}; \
DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-#define DEFINE_CLK_OMAP_HSDIVIDER(_name, _parent_name, \
- _parent_ptr, _flags, \
- _clksel_reg, _clksel_mask) \
- static const struct clksel _name##_div[] = { \
- { \
- .parent = _parent_ptr, \
- .rates = div31_1to31_rates \
- }, \
- { .parent = NULL }, \
- }; \
- static struct clk _name; \
- static const char *_name##_parent_names[] = { \
- _parent_name, \
- }; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _name##_div, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .ops = &clkhwops_omap4_dpllmx, \
- }; \
- DEFINE_STRUCT_CLK(_name, _name##_parent_names, omap_hsdivider_ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
@@ -248,6 +223,23 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
+/*
+ * Clock features setup. Used instead of CPU type checks.
+ */
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
+
+extern struct ti_clk_features ti_clk_features;
+
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_dummy;
extern const struct clkops clkops_omap2_dflt;
@@ -286,4 +278,6 @@ extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
extern void omap_clocks_register(struct omap_clk *oclks, int cnt);
+
+void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
index 9ad7594e7622..e966e3a3c931 100644
--- a/arch/arm/mach-omap2/cm2_7xx.h
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -357,6 +357,10 @@
#define DRA7XX_CM_L3INIT_SATA_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0088)
#define DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET 0x00a0
#define DRA7XX_CM_PCIE_STATICDEP_OFFSET 0x00a4
+#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET 0x00b0
+#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b0)
+#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET 0x00b8
+#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b8)
#define DRA7XX_CM_GMAC_CLKSTCTRL_OFFSET 0x00c0
#define DRA7XX_CM_GMAC_STATICDEP_OFFSET 0x00c4
#define DRA7XX_CM_GMAC_DYNAMICDEP_OFFSET 0x00c8
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 751f3549bf6f..f4796c002070 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -44,8 +44,7 @@ struct omap3_scratchpad {
};
struct omap3_scratchpad_prcm_block {
- u32 prm_clksrc_ctrl;
- u32 prm_clksel;
+ u32 prm_contents[2];
u32 cm_contents[11];
u32 prcm_block_size;
};
@@ -282,13 +281,9 @@ void omap3_clear_scratchpad_contents(void)
void __iomem *v_addr;
u32 offset = 0;
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
- if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
- OMAP3430_GLOBAL_COLD_RST_MASK) {
+ if (omap3xxx_prm_clear_global_cold_reset()) {
for ( ; offset <= max_offset; offset += 0x4)
writel_relaxed(0x0, (v_addr + offset));
- omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
- OMAP3430_GR_MOD,
- OMAP3_PRM_RSTST_OFFSET);
}
}
@@ -331,13 +326,7 @@ void omap3_save_scratchpad_contents(void)
scratchpad_contents.sdrc_block_offset = 0x64;
/* Populate the PRCM block contents */
- prcm_block_contents.prm_clksrc_ctrl =
- omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
- prcm_block_contents.prm_clksel =
- omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
- OMAP3_PRM_CLKSEL_OFFSET);
-
+ omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
prcm_block_contents.prcm_block_size = 0x0;
@@ -575,9 +564,50 @@ int omap3_ctrl_save_padconf(void)
* Sets the bootmode for IVA2 to idle. This is needed by the PM code to
* force disable IVA2 so that it does not prevent any low-power states.
*/
-void omap3_ctrl_set_iva_bootmode_idle(void)
+static void __init omap3_ctrl_set_iva_bootmode_idle(void)
{
omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
OMAP343X_CONTROL_IVA2_BOOTMOD);
}
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+static void __init omap3_ctrl_setup_d2d_padconf(void)
+{
+ u16 mask, padconf;
+
+ /*
+ * In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+ */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
+
+/**
+ * omap3_ctrl_init - does static initializations for control module
+ *
+ * Initializes system control module. This sets up the sysconfig autoidle,
+ * and sets up modem and iva2 so that they can be idled properly.
+ */
+void __init omap3_ctrl_init(void)
+{
+ omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+
+ omap3_ctrl_set_iva_bootmode_idle();
+
+ omap3_ctrl_setup_d2d_padconf();
+}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index da054801b114..a3c013345c45 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,11 +16,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include "ctrl_module_core_44xx.h"
-#include "ctrl_module_wkup_44xx.h"
-#include "ctrl_module_pad_core_44xx.h"
-#include "ctrl_module_pad_wkup_44xx.h"
-
#include "am33xx.h"
#ifndef __ASSEMBLY__
@@ -254,6 +249,39 @@
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
+/* OMAP4 CONTROL MODULE */
+#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
+#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
+
+/* OMAP4 CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT 29
+#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT 24
+#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT 19
+#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT 14
+#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
+
+/* OMAP4 CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
+
/* OMAP54XX CONTROL STATUS register */
#define OMAP5XXX_CONTROL_STATUS 0x134
#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
@@ -427,7 +455,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
-extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_init(void);
extern void omap2_set_globals_control(void __iomem *ctrl,
void __iomem *ctrl_pad);
#else
diff --git a/arch/arm/mach-omap2/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h
deleted file mode 100644
index 01970824e0e5..000000000000
--- a/arch/arm/mach-omap2/ctrl_module_core_44xx.h
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE 0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
-#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT 0
-#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT 16
-#define OMAP4_USB_PROD_ID_MASK (0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT 0
-#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT 11
-#define OMAP4_ATTILA_CONF_MASK (0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT 8
-#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT 0
-#define OMAP4_SYS_BOOT_MASK (0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT 1
-#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT 0
-#define OMAP4_USBPHY_PD_MASK (1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT 12
-#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT 11
-#define OMAP4_BGAP_TSHUT_MASK (1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT 8
-#define OMAP4_DISCHRGVBUS_MASK (1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT 7
-#define OMAP4_CHRGVBUS_MASK (1 << 7)
-#define OMAP4_DRVVBUS_SHIFT 6
-#define OMAP4_DRVVBUS_MASK (1 << 6)
-#define OMAP4_IDPULLUP_SHIFT 5
-#define OMAP4_IDPULLUP_MASK (1 << 5)
-#define OMAP4_IDDIG_SHIFT 4
-#define OMAP4_IDDIG_MASK (1 << 4)
-#define OMAP4_SESSEND_SHIFT 3
-#define OMAP4_SESSEND_MASK (1 << 3)
-#define OMAP4_VBUSVALID_SHIFT 2
-#define OMAP4_VBUSVALID_MASK (1 << 2)
-#define OMAP4_BVALID_SHIFT 1
-#define OMAP4_BVALID_MASK (1 << 1)
-#define OMAP4_AVALID_SHIFT 0
-#define OMAP4_AVALID_MASK (1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT 0
-#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT 0
-#define OMAP4_SELECT_MASK (0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT 0
-#define OMAP4_MULT_MASK (0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT 0
-#define OMAP4_MODE_MASK (0xf << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
deleted file mode 100644
index c88420de1151..000000000000
--- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31
-#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT 31
-#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT 30
-#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT 29
-#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT 28
-#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT 27
-#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT 26
-#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT 25
-#define OMAP4_VDDS_DV_C2C_MASK (1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT 24
-#define OMAP4_VDDS_DV_CAM_MASK (1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT 23
-#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22
-#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT 30
-#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT 28
-#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT 26
-#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT 24
-#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT 22
-#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT 20
-#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT 18
-#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT 16
-#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT 14
-#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT 12
-#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT 10
-#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT 8
-#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT 6
-#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT 4
-#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT 2
-#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT 0
-#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT 30
-#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT 28
-#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT 26
-#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT 24
-#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT 22
-#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT 20
-#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT 18
-#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT 16
-#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT 14
-#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT 12
-#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT 10
-#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT 8
-#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT 6
-#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT 4
-#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT 2
-#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT 0
-#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT 31
-#define OMAP4_C2C_DR0_LB_MASK (1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT 30
-#define OMAP4_DPM_DR1_LB_MASK (1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT 29
-#define OMAP4_DPM_DR2_LB_MASK (1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT 28
-#define OMAP4_DPM_DR3_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT 27
-#define OMAP4_GPIO_DR0_LB_MASK (1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT 26
-#define OMAP4_GPIO_DR1_LB_MASK (1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT 25
-#define OMAP4_GPIO_DR10_LB_MASK (1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT 24
-#define OMAP4_GPIO_DR2_LB_MASK (1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT 23
-#define OMAP4_GPMC_DR0_LB_MASK (1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT 22
-#define OMAP4_GPMC_DR1_LB_MASK (1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT 21
-#define OMAP4_GPMC_DR4_LB_MASK (1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT 20
-#define OMAP4_GPMC_DR5_LB_MASK (1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT 19
-#define OMAP4_GPMC_DR7_LB_MASK (1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT 18
-#define OMAP4_HSI2_DR0_LB_MASK (1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT 17
-#define OMAP4_HSI2_DR1_LB_MASK (1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT 16
-#define OMAP4_HSI2_DR2_LB_MASK (1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT 15
-#define OMAP4_KPD_DR0_LB_MASK (1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT 14
-#define OMAP4_KPD_DR1_LB_MASK (1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT 13
-#define OMAP4_PDM_DR0_LB_MASK (1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT 12
-#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT 11
-#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT 10
-#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT 9
-#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT 8
-#define OMAP4_SPI3_DR0_LB_MASK (1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT 7
-#define OMAP4_SPI3_DR1_LB_MASK (1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT 6
-#define OMAP4_UART3_DR2_LB_MASK (1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT 5
-#define OMAP4_UART3_DR3_LB_MASK (1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT 4
-#define OMAP4_UART3_DR4_LB_MASK (1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT 3
-#define OMAP4_UART3_DR5_LB_MASK (1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT 2
-#define OMAP4_USBA0_DR1_LB_MASK (1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT 1
-#define OMAP4_USBA_DR2_LB_MASK (1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT 31
-#define OMAP4_USBB1_DR0_LB_MASK (1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT 30
-#define OMAP4_USBB2_DR0_LB_MASK (1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT 29
-#define OMAP4_USBA0_DR0_LB_MASK (1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT 30
-#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT 28
-#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT 26
-#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT 24
-#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT 22
-#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT 20
-#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT 18
-#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT 16
-#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT 14
-#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT 12
-#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT 10
-#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT 8
-#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT 0
-#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT 30
-#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT 28
-#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT 26
-#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT 24
-#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT 22
-#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT 20
-#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT 31
-#define OMAP4_DMIC_DR0_LB_MASK (1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT 30
-#define OMAP4_GPIO_DR3_LB_MASK (1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT 29
-#define OMAP4_GPIO_DR4_LB_MASK (1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT 28
-#define OMAP4_GPIO_DR5_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT 27
-#define OMAP4_GPIO_DR6_LB_MASK (1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT 26
-#define OMAP4_HSI_DR1_LB_MASK (1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT 25
-#define OMAP4_HSI_DR2_LB_MASK (1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT 24
-#define OMAP4_HSI_DR3_LB_MASK (1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT 23
-#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT 22
-#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT 21
-#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT 16
-#define OMAP4_SPI2_DR0_LB_MASK (1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT 15
-#define OMAP4_SPI2_DR1_LB_MASK (1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT 14
-#define OMAP4_SPI2_DR2_LB_MASK (1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT 13
-#define OMAP4_UART2_DR0_LB_MASK (1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT 12
-#define OMAP4_UART2_DR1_LB_MASK (1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT 11
-#define OMAP4_UART4_DR0_LB_MASK (1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT 10
-#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT 30
-#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT 27
-#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT 25
-#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT 22
-#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT 26
-#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31
-#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27
-#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23
-#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19
-#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15
-#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11
-#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7
-#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3
-#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT 31
-#define OMAP4_AVDAC_ACEN_MASK (1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT 29
-#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT 13
-#define OMAP4_AVDAC_CTL_MASK (0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31
-#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30
-#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT 29
-#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT 24
-#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT 19
-#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT 14
-#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
-#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30
-#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30
-#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29
-#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT 18
-#define OMAP4_USB2PHY_DATADET_MASK (1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT 17
-#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT 16
-#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6
-#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT 23
-#define OMAP4_USB_FD_CDEN_MASK (1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30
-#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28
-#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO1_3 */
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_LPDDR2IO2_0 */
-#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_1 */
-#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_2 */
-#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO2_3 */
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_BUS_HOLD */
-#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31
-#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS3_EN_SHIFT 30
-#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30)
-
-/* CONTROL_C2C */
-#define OMAP4_MIRROR_MODE_EN_SHIFT 31
-#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31)
-#define OMAP4_C2C_SPARE_SHIFT 24
-#define OMAP4_C2C_SPARE_MASK (0x7f << 24)
-
-/* CORE_CONTROL_SPARE_RW */
-#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R */
-#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R_C0 */
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-/* CONTROL_EFUSE_1 */
-#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24
-#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24)
-#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16
-#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16)
-#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8
-#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8)
-#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0
-#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_2 */
-#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31
-#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31)
-#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30
-#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30)
-#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29
-#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29)
-#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28
-#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28)
-#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27
-#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27)
-#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26
-#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26)
-#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25
-#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25)
-#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24
-#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24)
-#define OMAP4_LPDDR2_PTV_N1_SHIFT 23
-#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23)
-#define OMAP4_LPDDR2_PTV_N2_SHIFT 22
-#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22)
-#define OMAP4_LPDDR2_PTV_N3_SHIFT 21
-#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21)
-#define OMAP4_LPDDR2_PTV_N4_SHIFT 20
-#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20)
-#define OMAP4_LPDDR2_PTV_N5_SHIFT 19
-#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19)
-#define OMAP4_LPDDR2_PTV_P1_SHIFT 18
-#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18)
-#define OMAP4_LPDDR2_PTV_P2_SHIFT 17
-#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17)
-#define OMAP4_LPDDR2_PTV_P3_SHIFT 16
-#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16)
-#define OMAP4_LPDDR2_PTV_P4_SHIFT 15
-#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15)
-#define OMAP4_LPDDR2_PTV_P5_SHIFT 14
-#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14)
-
-/* CONTROL_EFUSE_3 */
-#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_4 */
-#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
deleted file mode 100644
index 17c9b37042c0..000000000000
--- a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_0 */
-#define OMAP4_FREF_DR0_SC_SHIFT 30
-#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_SC_SHIFT 28
-#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_SC_SHIFT 26
-#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_SC_SHIFT 24
-#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_SC_SHIFT 22
-#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_SC_SHIFT 20
-#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_SC_SHIFT 18
-#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_SC_SHIFT 14
-#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_SC_SHIFT 12
-#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_1 */
-#define OMAP4_FREF_DR0_LB_SHIFT 30
-#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_LB_SHIFT 28
-#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_LB_SHIFT 26
-#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_LB_SHIFT 24
-#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_LB_SHIFT 22
-#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_LB_SHIFT 20
-#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_LB_SHIFT 18
-#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_LB_SHIFT 14
-#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_LB_SHIFT 12
-#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_FREF_SHIFT 31
-#define OMAP4_VDDS_DV_FREF_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK2_SHIFT 30
-#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30)
-
-/* CONTROL_XTAL_OSCILLATOR */
-#define OMAP4_OSCILLATOR_BOOST_SHIFT 31
-#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31)
-#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30
-#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30)
-
-/* CONTROL_USIMIO */
-#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31
-#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31)
-#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29
-#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29)
-#define OMAP4_USIM_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PWRDNZ_MASK (1 << 28)
-
-/* CONTROL_I2C_2 */
-#define OMAP4_SR_SDA_GLFENB_SHIFT 31
-#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_SR_SCL_GLFENB_SHIFT 27
-#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24)
-
-/* CONTROL_JTAG */
-#define OMAP4_JTAG_NTRST_EN_SHIFT 31
-#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31)
-#define OMAP4_JTAG_TCK_EN_SHIFT 30
-#define OMAP4_JTAG_TCK_EN_MASK (1 << 30)
-#define OMAP4_JTAG_RTCK_EN_SHIFT 29
-#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29)
-#define OMAP4_JTAG_TDI_EN_SHIFT 28
-#define OMAP4_JTAG_TDI_EN_MASK (1 << 28)
-#define OMAP4_JTAG_TDO_EN_SHIFT 27
-#define OMAP4_JTAG_TDO_EN_MASK (1 << 27)
-
-/* CONTROL_SYS */
-#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31
-#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31)
-
-/* WKUP_CONTROL_SPARE_RW */
-#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R */
-#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R_C0 */
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index b6f8f348296e..324f02bf8a51 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -432,9 +432,9 @@ static int __init omap2_init_devices(void)
*/
omap_init_audio();
omap_init_camera();
- omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
+ omap_init_mbox();
omap_init_mcspi();
omap_init_sham();
omap_init_aes();
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index a6d2cf1f8d02..e1a56d87599e 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -259,6 +259,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
d->dev_caps |= HS_CHANNELS_RESERVED;
+ if (platform_get_irq_byname(pdev, "0") < 0)
+ d->dev_caps |= DMA_ENGINE_HANDLE_IRQ;
+
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 6d7ba37e2257..cd5f3a0b97bd 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,11 +28,8 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
@@ -310,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (cpu_is_omap343x()) {
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -512,7 +509,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (cpu_is_omap343x()) {
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
WARN_ON(!freqsel);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 52f9438b92f2..4613f1e86988 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,10 +15,7 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include "soc.h"
#include "clock.h"
-#include "clock44xx.h"
-#include "cm-regbits-44xx.h"
/*
* Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
@@ -29,13 +26,23 @@
#define OMAP4_DPLL_LP_FINT_MAX 1000000
#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
+#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
/* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
{
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return -EINVAL;
mask = clk->flags & CLOCK_CLKOUTX2 ?
@@ -54,7 +61,7 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
@@ -72,7 +79,7 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8f559450c876..1fae5c123f79 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -728,6 +728,8 @@ int __init omap_clk_init(void)
if (!omap_clk_soc_init)
return 0;
+ ti_clk_init_features();
+
ret = of_prcm_init();
if (!ret)
ret = omap_clk_soc_init();
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 2f15979c2e9c..65b1647092bd 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -16,7 +16,6 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -163,18 +162,6 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
};
/* mailbox */
-static struct omap_mbox_dev_info omap2420_mailbox_info[] = {
- { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 },
- { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 },
-};
-
-static struct omap_mbox_pdata omap2420_mailbox_attrs = {
- .num_users = 4,
- .num_fifos = 6,
- .info_cnt = ARRAY_SIZE(omap2420_mailbox_info),
- .info = omap2420_mailbox_info,
-};
-
static struct omap_hwmod omap2420_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
@@ -188,7 +175,6 @@ static struct omap_hwmod omap2420_mailbox_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
- .dev_attr = &omap2420_mailbox_attrs,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6d1b60902179..c2555cb95e71 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -17,7 +17,6 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -161,17 +160,6 @@ static struct omap_hwmod omap2430_dma_system_hwmod = {
};
/* mailbox */
-static struct omap_mbox_dev_info omap2430_mailbox_info[] = {
- { .name = "dsp", .tx_id = 0, .rx_id = 1 },
-};
-
-static struct omap_mbox_pdata omap2430_mailbox_attrs = {
- .num_users = 4,
- .num_fifos = 6,
- .info_cnt = ARRAY_SIZE(omap2430_mailbox_info),
- .info = omap2430_mailbox_info,
-};
-
static struct omap_hwmod omap2430_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
@@ -185,7 +173,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
- .dev_attr = &omap2430_mailbox_attrs,
};
/* mcspi3 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index 0413daba2dba..c1e98d589100 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -152,15 +152,6 @@ struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
{ }
};
-struct omap_hwmod_addr_space omap2_mailbox_addrs[] = {
- {
- .pa_start = 0x48094000,
- .pa_end = 0x48094000 + SZ_512 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
{
.name = "mpu",
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 5da7a42a6d90..c6c6384de867 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -37,46 +37,6 @@ struct omap_hwmod_class omap2_uart_class = {
};
/*
- * 'dss' class
- * display sub-system
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dss_hwmod_class = {
- .name = "dss",
- .sysc = &omap2_dss_sysc,
- .reset = omap_dss_reset,
-};
-
-/*
- * 'rfbi' class
- * remote frame buffer interface
- */
-
-static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_rfbi_hwmod_class = {
- .name = "rfbi",
- .sysc = &omap2_rfbi_sysc,
-};
-
-/*
* 'venc' class
* video encoder
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index e2db378b849e..8f5989d48a80 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -317,21 +317,11 @@ struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
- {
- .pa_start = 0x480C8000,
- .pa_end = 0x480C8000 + (SZ_4K - 1),
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4 ls -> mailbox */
struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_mailbox_hwmod,
.clk = "l4ls_gclk",
- .addr = am33xx_mailbox_addrs,
.user = OCP_USER_MPU,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c2cc8083fdd..fea01aa3ef42 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -19,6 +19,8 @@
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
+#include "omap_hwmod_common_data.h"
+
/* IP blocks */
static struct omap_hwmod am43xx_l4_hs_hwmod = {
@@ -415,6 +417,72 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
},
};
+/* dss */
+
+static struct omap_hwmod am43xx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* dispc */
+
+struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+ .manager_count = 1,
+ .has_framedonetv_irq = 0
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &am43xx_dispc_sysc,
+};
+
+static struct omap_hwmod am43xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &am43xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+ .dev_attr = &am43xx_dss_dispc_dev_attr,
+};
+
+/* rfbi */
+
+static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -654,6 +722,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
+ .master = &am43xx_dss_core_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_core_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_dispc_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_rfbi_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -748,6 +844,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
+ &am43xx_dss__l3_main,
+ &am43xx_l4_ls__dss,
+ &am43xx_l4_ls__dss_dispc,
+ &am43xx_l4_ls__dss_rfbi,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 41e54f759934..5e61b8c0944b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -4142,21 +4142,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
- {
- .pa_start = 0x4a0f4000,
- .pa_end = 0x4a0f41ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_cfg -> mailbox */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_mailbox_hwmod,
.clk = "l4_div_ck",
- .addr = omap44xx_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 284324f2b98a..2757abf87fbc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -273,6 +273,56 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
};
/*
+ * 'gmac' class
+ * cpsw/gmac sub system
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_gmac_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x8,
+ .syss_offs = 0x4,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+ MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_gmac_hwmod_class = {
+ .name = "gmac",
+ .sysc = &dra7xx_gmac_sysc,
+};
+
+static struct omap_hwmod dra7xx_gmac_hwmod = {
+ .name = "gmac",
+ .class = &dra7xx_gmac_hwmod_class,
+ .clkdm_name = "gmac_clkdm",
+ .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+ .main_clk = "dpll_gmac_ck",
+ .mpu_rt_idx = 1,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'mdio' class
+ */
+static struct omap_hwmod_class dra7xx_mdio_hwmod_class = {
+ .name = "davinci_mdio",
+};
+
+static struct omap_hwmod dra7xx_mdio_hwmod = {
+ .name = "davinci_mdio",
+ .class = &dra7xx_mdio_hwmod_class,
+ .clkdm_name = "gmac_clkdm",
+ .main_clk = "dpll_gmac_ck",
+};
+
+/*
* 'dcan' class
*
*/
@@ -343,19 +393,10 @@ static struct omap_dma_dev_attr dma_dev_attr = {
};
/* dma_system */
-static struct omap_hwmod_irq_info dra7xx_dma_system_irqs[] = {
- { .name = "0", .irq = 12 + DRA7XX_IRQ_GIC_START },
- { .name = "1", .irq = 13 + DRA7XX_IRQ_GIC_START },
- { .name = "2", .irq = 14 + DRA7XX_IRQ_GIC_START },
- { .name = "3", .irq = 15 + DRA7XX_IRQ_GIC_START },
- { .irq = -1 }
-};
-
static struct omap_hwmod dra7xx_dma_system_hwmod = {
.name = "dma_system",
.class = &dra7xx_dma_hwmod_class,
.clkdm_name = "dma_clkdm",
- .mpu_irqs = dra7xx_dma_system_irqs,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
@@ -939,6 +980,194 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
};
/*
+ * 'mailbox' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = {
+ .name = "mailbox",
+ .sysc = &dra7xx_mailbox_sysc,
+};
+
+/* mailbox1 */
+static struct omap_hwmod dra7xx_mailbox1_hwmod = {
+ .name = "mailbox1",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox2 */
+static struct omap_hwmod dra7xx_mailbox2_hwmod = {
+ .name = "mailbox2",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox3 */
+static struct omap_hwmod dra7xx_mailbox3_hwmod = {
+ .name = "mailbox3",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox4 */
+static struct omap_hwmod dra7xx_mailbox4_hwmod = {
+ .name = "mailbox4",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox5 */
+static struct omap_hwmod dra7xx_mailbox5_hwmod = {
+ .name = "mailbox5",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox6 */
+static struct omap_hwmod dra7xx_mailbox6_hwmod = {
+ .name = "mailbox6",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox7 */
+static struct omap_hwmod dra7xx_mailbox7_hwmod = {
+ .name = "mailbox7",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox8 */
+static struct omap_hwmod dra7xx_mailbox8_hwmod = {
+ .name = "mailbox8",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox9 */
+static struct omap_hwmod dra7xx_mailbox9_hwmod = {
+ .name = "mailbox9",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox10 */
+static struct omap_hwmod dra7xx_mailbox10_hwmod = {
+ .name = "mailbox10",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox11 */
+static struct omap_hwmod dra7xx_mailbox11_hwmod = {
+ .name = "mailbox11",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox12 */
+static struct omap_hwmod dra7xx_mailbox12_hwmod = {
+ .name = "mailbox12",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox13 */
+static struct omap_hwmod dra7xx_mailbox13_hwmod = {
+ .name = "mailbox13",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/*
* 'mcspi' class
*
*/
@@ -1215,6 +1444,97 @@ static struct omap_hwmod dra7xx_ocp2scp1_hwmod = {
},
};
+/* ocp2scp3 */
+static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
+ .name = "ocp2scp3",
+ .class = &dra7xx_ocp2scp_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+};
+
+/*
+ * 'PCIE' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
+ .name = "pcie",
+};
+
+/* pcie1 */
+static struct omap_hwmod dra7xx_pcie1_hwmod = {
+ .name = "pcie1",
+ .class = &dra7xx_pcie_hwmod_class,
+ .clkdm_name = "pcie_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* pcie2 */
+static struct omap_hwmod dra7xx_pcie2_hwmod = {
+ .name = "pcie2",
+ .class = &dra7xx_pcie_hwmod_class,
+ .clkdm_name = "pcie_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'PCIE PHY' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
+ .name = "pcie-phy",
+};
+
+/* pcie1 phy */
+static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
+ .name = "pcie1-phy",
+ .class = &dra7xx_pcie_phy_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* pcie2 phy */
+static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
+ .name = "pcie2-phy",
+ .class = &dra7xx_pcie_phy_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/*
* 'qspi' class
*
@@ -1249,6 +1569,38 @@ static struct omap_hwmod dra7xx_qspi_hwmod = {
};
/*
+ * 'rtcss' class
+ *
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = {
+ .sysc_offs = 0x0078,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_rtcss_hwmod_class = {
+ .name = "rtcss",
+ .sysc = &dra7xx_rtcss_sysc,
+};
+
+/* rtcss */
+static struct omap_hwmod dra7xx_rtcss_hwmod = {
+ .name = "rtcss",
+ .class = &dra7xx_rtcss_hwmod_class,
+ .clkdm_name = "rtc_clkdm",
+ .main_clk = "sys_32k_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
* 'sata' class
*
*/
@@ -2007,6 +2359,19 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__cpgmac0 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_gmac_hwmod,
+ .clk = "dpll_gmac_ck",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if dra7xx_gmac__mdio = {
+ .master = &dra7xx_gmac_hwmod,
+ .slave = &dra7xx_mdio_hwmod,
+ .user = OCP_USER_MPU,
+};
+
/* l4_wkup -> dcan1 */
static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
.master = &dra7xx_l4_wkup_hwmod,
@@ -2254,6 +2619,110 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_cfg -> mailbox1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_mailbox1_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox2 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox2_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox3 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox3_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox4 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox4_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox5 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox5_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox6 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox6_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox7 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox7_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox8 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox8_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox9 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox9 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox9_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox10 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox10 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox10_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox11 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox11 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox11_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox12 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox12 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox12_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox13 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox13_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_per1 -> mcspi1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = {
.master = &dra7xx_l4_per1_hwmod,
@@ -2334,6 +2803,62 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_cfg -> ocp2scp3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_ocp2scp3_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> pcie1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
+ .master = &dra7xx_l3_main_1_hwmod,
+ .slave = &dra7xx_pcie1_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie1_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> pcie2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
+ .master = &dra7xx_l3_main_1_hwmod,
+ .slave = &dra7xx_pcie2_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie2_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie1 phy */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie1_phy_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie2 phy */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie2_phy_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
{
.pa_start = 0x4b300000,
@@ -2352,6 +2877,14 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per3 -> rtcss */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__rtcss = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_rtcss_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_addr_space dra7xx_sata_addrs[] = {
{
.name = "sysc",
@@ -2650,6 +3183,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_wkup__ctrl_module_wkup,
&dra7xx_l4_wkup__dcan1,
&dra7xx_l4_per2__dcan2,
+ &dra7xx_l4_per2__cpgmac0,
+ &dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__dss,
&dra7xx_l3_main_1__dispc,
@@ -2670,6 +3205,19 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per1__i2c3,
&dra7xx_l4_per1__i2c4,
&dra7xx_l4_per1__i2c5,
+ &dra7xx_l4_cfg__mailbox1,
+ &dra7xx_l4_per3__mailbox2,
+ &dra7xx_l4_per3__mailbox3,
+ &dra7xx_l4_per3__mailbox4,
+ &dra7xx_l4_per3__mailbox5,
+ &dra7xx_l4_per3__mailbox6,
+ &dra7xx_l4_per3__mailbox7,
+ &dra7xx_l4_per3__mailbox8,
+ &dra7xx_l4_per3__mailbox9,
+ &dra7xx_l4_per3__mailbox10,
+ &dra7xx_l4_per3__mailbox11,
+ &dra7xx_l4_per3__mailbox12,
+ &dra7xx_l4_per3__mailbox13,
&dra7xx_l4_per1__mcspi1,
&dra7xx_l4_per1__mcspi2,
&dra7xx_l4_per1__mcspi3,
@@ -2680,7 +3228,15 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per1__mmc4,
&dra7xx_l4_cfg__mpu,
&dra7xx_l4_cfg__ocp2scp1,
+ &dra7xx_l4_cfg__ocp2scp3,
+ &dra7xx_l3_main_1__pcie1,
+ &dra7xx_l4_cfg__pcie1,
+ &dra7xx_l3_main_1__pcie2,
+ &dra7xx_l4_cfg__pcie2,
+ &dra7xx_l4_cfg__pcie1_phy,
+ &dra7xx_l4_cfg__pcie2_phy,
&dra7xx_l3_main_1__qspi,
+ &dra7xx_l4_per3__rtcss,
&dra7xx_l4_cfg__sata,
&dra7xx_l4_cfg__smartreflex_core,
&dra7xx_l4_cfg__smartreflex_mpu,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2c38c6b0ee03..11ed5a17dd77 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -33,7 +33,6 @@ extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[];
extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[];
extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
-extern struct omap_hwmod_addr_space omap2_mailbox_addrs[];
extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c
new file mode 100644
index 000000000000..f21664da25a2
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c
@@ -0,0 +1,55 @@
+/*
+ * omap_hwmod_common_ipblock_data.c - common IP block data for OMAP2+
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap_hwmod.h"
+#include "omap_hwmod_common_data.h"
+
+/*
+ * 'dss' class
+ * display sub-system
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dss_hwmod_class = {
+ .name = "dss",
+ .sysc = &omap2_dss_sysc,
+ .reset = omap_dss_reset,
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_rfbi_hwmod_class = {
+ .name = "rfbi",
+ .sysc = &omap2_rfbi_sysc,
+};
+
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a5ea988ff340..d76694b7a591 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void)
/* Clear old wake-up events */
/* REVISIT: These write to reserved bits? */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
- omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,23 +104,18 @@ no_sleep:
clk_enable(osc_ck);
/* clear CORE wake-up events */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
- omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
/* MPU domain wake events */
- l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- if (l & 0x01)
- omap2_prm_write_mod_reg(0x01, OCP_MOD,
- OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- if (l & 0x20)
- omap2_prm_write_mod_reg(0x20, OCP_MOD,
- OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+ 0x1);
- /* Mask future PRCM-to-MPU interrupts */
- omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+ 0x20);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -148,9 +143,9 @@ static void omap2_enter_mpu_retention(void)
* it is in retention mode. */
if (omap2_allow_mpu_retention()) {
/* REVISIT: These write to reserved bits? */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
- omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
/* Try to enter MPU retention */
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 507d8eeaab95..3f80929a5f7e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -133,60 +133,13 @@ static void omap3_save_secure_ram_context(void)
}
}
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
- u32 wkst, fclk, iclk, clken;
- u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
- u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
- u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
- u16 grpsel_off = (regs == 3) ?
- OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
- int c = 0;
-
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
- if (wkst) {
- iclk = omap2_cm_read_mod_reg(module, iclk_off);
- fclk = omap2_cm_read_mod_reg(module, fclk_off);
- while (wkst) {
- clken = wkst;
- omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
- /*
- * For USBHOST, we don't know whether HOST1 or
- * HOST2 woke us up, so enable both f-clocks
- */
- if (module == OMAP3430ES2_USBHOST_MOD)
- clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
- omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
- omap2_prm_write_mod_reg(wkst, module, wkst_off);
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
- c++;
- }
- omap2_cm_write_mod_reg(iclk, module, iclk_off);
- omap2_cm_write_mod_reg(fclk, module, fclk_off);
- }
-
- return c;
-}
-
static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ ~(OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK));
return c ? IRQ_HANDLED : IRQ_NONE;
}
@@ -200,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
- c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
}
return c ? IRQ_HANDLED : IRQ_NONE;
@@ -399,159 +353,11 @@ restore:
#define omap3_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- * retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle. This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
- /* ensure IVA2 clock is disabled */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* if no clock activity, nothing else to do */
- if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
- OMAP3430_CLKACTIVITY_IVA2_MASK))
- return;
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Enable IVA2 clock */
- omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
- OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Set IVA2 boot mode to 'idle' */
- omap3_ctrl_set_iva_bootmode_idle();
-
- /* Un-reset IVA2 */
- omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Disable IVA2 clock */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
-static void __init omap3_d2d_idle(void)
-{
- u16 mask, padconf;
-
- /* In a stand alone OMAP3430 where there is not a stacked
- * modem for the D2D Idle Ack and D2D MStandby must be pulled
- * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
- * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
- mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
-
- /* reset modem */
- omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
- OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
- CORE_MOD, OMAP2_RM_RSTCTRL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
-}
-
static void __init prcm_setup_regs(void)
{
- u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_EN_UART4_MASK : 0;
- u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_GRPSEL_UART4_MASK : 0;
-
- /* XXX This should be handled by hwmod code or SCM init code */
- omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
-
- /*
- * Enable control of expternal oscillator through
- * sys_clkreq. In the long run clock framework should
- * take care of this.
- */
- omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
- 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
- OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
- /* setup wakup source */
- omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
- OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
- WKUP_MOD, PM_WKEN);
- /* No need to write EN_IO, that is always enabled */
- omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
- OMAP3430_GRPSEL_GPT1_MASK |
- OMAP3430_GRPSEL_GPT12_MASK,
- WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Enable PM_WKEN to support DSS LPR */
- omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
- OMAP3430_DSS_MOD, PM_WKEN);
-
- /* Enable wakeups in PER */
- omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
- OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
- OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
- OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
- OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
- OMAP3430_EN_MCBSP4_MASK,
- OMAP3430_PER_MOD, PM_WKEN);
- /* and allow them to wake up MPU */
- omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
- OMAP3430_GRPSEL_GPIO2_MASK |
- OMAP3430_GRPSEL_GPIO3_MASK |
- OMAP3430_GRPSEL_GPIO4_MASK |
- OMAP3430_GRPSEL_GPIO5_MASK |
- OMAP3430_GRPSEL_GPIO6_MASK |
- OMAP3430_GRPSEL_UART3_MASK |
- OMAP3430_GRPSEL_MCBSP2_MASK |
- OMAP3430_GRPSEL_MCBSP3_MASK |
- OMAP3430_GRPSEL_MCBSP4_MASK,
- OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Don't attach IVA interrupts */
- if (omap3_has_iva()) {
- omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
- OMAP3430_PM_IVAGRPSEL);
- }
-
- /* Clear any pending 'reset' flags */
- omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
- /*
- * We need to idle iva2_pwrdm even on am3703 with no iva2.
- */
- omap3_iva_idle();
+ omap3_ctrl_init();
- omap3_d2d_idle();
+ omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
}
void omap3_pm_off_mode_enable(int enable)
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7785be984edd..ad7b3e9977f8 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -142,5 +142,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
+#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#endif
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index a3a3cca2bcc4..86958050547a 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -114,6 +114,24 @@ void omap2xxx_prm_dpll_reset(void)
omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
}
+/**
+ * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
+ * @module: PRM module to clear wakeups from
+ * @regs: register offset to clear
+ * @wkst_mask: wakeup status mask to clear
+ *
+ * Clears wakeup status bits for a given module, so that the device can
+ * re-enter idle.
+ */
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+ u32 wkst;
+
+ wkst = omap2_prm_read_mod_reg(module, regs);
+ wkst &= wkst_mask;
+ omap2_prm_write_mod_reg(wkst, module, regs);
+}
+
int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
{
omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index d2cb6365716f..d73414139292 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -125,6 +125,7 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
extern void omap2xxx_prm_dpll_reset(void);
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
extern int __init omap2xxx_prm_init(void);
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4bd7a2dca8af..2458be6fc67b 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -26,6 +26,8 @@
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
+#include "cm3xxx.h"
+#include "cm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
@@ -206,6 +208,167 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
}
/**
+ * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register set to clear, 1 or 3
+ * @ignore_bits: wakeup status bits to ignore
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+{
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+ wkst &= ~ignore_bits;
+ if (wkst) {
+ iclk = omap2_cm_read_mod_reg(module, iclk_off);
+ fclk = omap2_cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+ omap2_prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= ~ignore_bits;
+ c++;
+ }
+ omap2_cm_write_mod_reg(iclk, module, iclk_off);
+ omap2_cm_write_mod_reg(fclk, module, fclk_off);
+ }
+
+ return c;
+}
+
+/**
+ * omap3_prm_reset_modem - toggle reset signal for modem
+ *
+ * Toggles the reset signal to modem IP block. Required to allow
+ * OMAP3430 without stacked modem to idle properly.
+ */
+void __init omap3_prm_reset_modem(void)
+{
+ omap2_prm_write_mod_reg(
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
+ CORE_MOD, OMAP2_RM_RSTCTRL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3_prm_init_pm - initialize PM related registers for PRM
+ * @has_uart4: SoC has UART4
+ * @has_iva: SoC has IVA
+ *
+ * Initializes PRM registers for PM use. Called from PM init.
+ */
+void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
+{
+ u32 en_uart4_mask;
+ u32 grpsel_uart4_mask;
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+ OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+ OMAP3430_GRPSEL_GPT1_MASK |
+ OMAP3430_GRPSEL_GPT12_MASK,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* Enable PM_WKEN to support DSS LPR */
+ omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
+ OMAP3430_DSS_MOD, PM_WKEN);
+
+ if (has_uart4) {
+ en_uart4_mask = OMAP3630_EN_UART4_MASK;
+ grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+ }
+
+ /* Enable wakeups in PER */
+ omap2_prm_write_mod_reg(en_uart4_mask |
+ OMAP3430_EN_GPIO2_MASK |
+ OMAP3430_EN_GPIO3_MASK |
+ OMAP3430_EN_GPIO4_MASK |
+ OMAP3430_EN_GPIO5_MASK |
+ OMAP3430_EN_GPIO6_MASK |
+ OMAP3430_EN_UART3_MASK |
+ OMAP3430_EN_MCBSP2_MASK |
+ OMAP3430_EN_MCBSP3_MASK |
+ OMAP3430_EN_MCBSP4_MASK,
+ OMAP3430_PER_MOD, PM_WKEN);
+
+ /* and allow them to wake up MPU */
+ omap2_prm_write_mod_reg(grpsel_uart4_mask |
+ OMAP3430_GRPSEL_GPIO2_MASK |
+ OMAP3430_GRPSEL_GPIO3_MASK |
+ OMAP3430_GRPSEL_GPIO4_MASK |
+ OMAP3430_GRPSEL_GPIO5_MASK |
+ OMAP3430_GRPSEL_GPIO6_MASK |
+ OMAP3430_GRPSEL_UART3_MASK |
+ OMAP3430_GRPSEL_MCBSP2_MASK |
+ OMAP3430_GRPSEL_MCBSP3_MASK |
+ OMAP3430_GRPSEL_MCBSP4_MASK,
+ OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* Don't attach IVA interrupts */
+ if (has_iva) {
+ omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
+ OMAP3430_PM_IVAGRPSEL);
+ }
+
+ /* Clear any pending 'reset' flags */
+ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
+ OMAP2_RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ /* We need to idle iva2_pwrdm even on am3703 with no iva2. */
+ omap3xxx_prm_iva_idle();
+
+ omap3_prm_reset_modem();
+}
+
+/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
@@ -276,6 +439,76 @@ static u32 omap3xxx_prm_read_reset_sources(void)
return r;
}
+/**
+ * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ */
+void omap3xxx_prm_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Un-reset IVA2 */
+ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
+ * and clears it if asserted
+ *
+ * Checks if cold-reset has occurred and clears the status bit if yes. Returns
+ * 1 if cold-reset has occurred, 0 otherwise.
+ */
+int omap3xxx_prm_clear_global_cold_reset(void)
+{
+ if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+ OMAP3430_GLOBAL_COLD_RST_MASK) {
+ omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_RSTST_OFFSET);
+ return 1;
+ }
+
+ return 0;
+}
+
+void omap3_prm_save_scratchpad_contents(u32 *ptr)
+{
+ *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSEL_OFFSET);
+}
+
/* Powerdomain low-level functions */
static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 1dacfc5b1959..bc37d42a8704 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -162,6 +162,12 @@ extern void omap3xxx_prm_dpll3_reset(void);
extern int __init omap3xxx_prm_init(void);
extern u32 omap3xxx_prm_get_reset_sources(void);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+void omap3xxx_prm_iva_idle(void);
+void omap3_prm_reset_modem(void);
+int omap3xxx_prm_clear_global_cold_reset(void);
+void omap3_prm_save_scratchpad_contents(u32 *ptr);
+void omap3_prm_init_pm(bool has_uart4, bool has_iva);
#endif /* __ASSEMBLER */
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index d92a8404edc7..4bb50fbf29be 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -374,6 +374,10 @@
#define DRA7XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET 0x007c
#define DRA7XX_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088
#define DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c
+#define DRA7XX_PM_L3INIT_PCIESS1_WKDEP_OFFSET 0x00b0
+#define DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET 0x00b4
+#define DRA7XX_PM_L3INIT_PCIESS2_WKDEP_OFFSET 0x00b8
+#define DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET 0x00bc
#define DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET 0x00d4
#define DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET 0x00e4
#define DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET 0x00ec
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
deleted file mode 100644
index 26003e23796d..000000000000
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ /dev/null
@@ -1,102 +0,0 @@
-# arch/arm/mach-s5p64x0/Kconfig
-#
-# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-if ARCH_S5P64X0
-
-config CPU_S5P6440
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_SLEEP if PM
- select SAMSUNG_WAKEMASK if PM
- help
- Enable S5P6440 CPU support
-
-config CPU_S5P6450
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_SLEEP if PM
- select SAMSUNG_WAKEMASK if PM
- help
- Enable S5P6450 CPU support
-
-config S5P64X0_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5P64X0 based boards with a LCD display
- through RGB interface.
-
-config S5P64X0_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S5P64X0_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations
-
-config S5P64X0_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-# machine support
-
-config MACH_SMDK6440
- bool "SMDK6440"
- select CPU_S5P6440
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6440
-
-config MACH_SMDK6450
- bool "SMDK6450"
- select CPU_S5P6450
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6450
-
-menu "Use 8-bit SDHCI bus width"
-
-config S5P64X0_SD_CH1_8BIT
- bool "SDHCI Channel 1 (Slot 1)"
- depends on MACH_SMDK6450 || MACH_SMDK6440
- help
- Support SDHCI Channel 1 8-bit bus.
- If selected, Channel 2 is disabled.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
deleted file mode 100644
index 12bb951187a4..000000000000
--- a/arch/arm/mach-s5p64x0/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# arch/arm/mach-s5p64x0/Makefile
-#
-# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core
-
-obj-y += common.o clock.o
-obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
-obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
-
-obj-$(CONFIG_PM) += pm.o irq-pm.o
-
-obj-y += dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
-obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o
-
-# device support
-
-obj-y += dev-audio.o
-
-obj-y += setup-i2c0.o
-obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot
deleted file mode 100644
index 79ece4055b02..000000000000
--- a/arch/arm/mach-s5p64x0/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
deleted file mode 100644
index ae34a1d5e10a..000000000000
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P6440 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "clock.h"
-#include "common.h"
-
-static u32 epll_div[][5] = {
- { 36000000, 0, 48, 1, 4 },
- { 48000000, 0, 32, 1, 3 },
- { 60000000, 0, 40, 1, 3 },
- { 72000000, 0, 48, 1, 3 },
- { 84000000, 0, 28, 1, 2 },
- { 96000000, 0, 32, 1, 2 },
- { 32768000, 45264, 43, 1, 4 },
- { 45158000, 6903, 30, 1, 3 },
- { 49152000, 50332, 32, 1, 3 },
- { 67738000, 10398, 45, 1, 3 },
- { 73728000, 9961, 49, 1, 3 }
-};
-
-static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P64X0_EPLL_CON);
- epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
-
- epll_con_k &= ~(PLL90XX_KDIV_MASK);
- epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
- epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
- (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
- (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P64X0_EPLL_CON);
- __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5p6440_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5p6440_epll_set_rate,
-};
-
-static struct clksrc_clk clk_hclk = {
- .clk = {
- .name = "clk_hclk",
- .parent = &clk_armclk.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
- .clk = {
- .name = "clk_pclk",
- .parent = &clk_hclk.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
-};
-static struct clksrc_clk clk_hclk_low = {
- .clk = {
- .name = "clk_hclk_low",
- },
- .sources = &clkset_hclk_low,
- .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
- .clk = {
- .name = "clk_pclk_low",
- .parent = &clk_hclk_low.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_mem_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "post",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 5)
- }, {
- .name = "2d",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "dma",
- .devname = "dma-pl330",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "otg",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 20)
- }, {
- .name = "irom",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "lcd",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "hclk_fimgvg",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "tsi",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "watchdog",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "rtc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "timers",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "pcm",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "adc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "gps",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "dsim",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 28),
- }, {
- .name = "etm",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 29),
- }, {
- .name = "dmc0",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 30),
- }, {
- .name = "pclk_fimgvg",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 31),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 28),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 29),
- },
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "intc",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mem",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "gpio",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 18),
- },
-};
-
-static struct clk clk_iis_cd_v40 = {
- .name = "iis_cdclk_v40",
-};
-
-static struct clk clk_pcm_cd = {
- .name = "pcm_cdclk",
-};
-
-static struct clk *clkset_group1_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_group1 = {
- .sources = clkset_group1_list,
- .nr_sources = ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_fin_epll,
- &clk_iis_cd_v40,
- &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio = {
- .sources = clkset_audio_list,
- .nr_sources = ARRAY_SIZE(clkset_audio_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_post",
- .ctrlbit = (1 << 10),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_dispcon",
- .ctrlbit = (1 << 1),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimgvg",
- .ctrlbit = (1 << 2),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 24),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 25),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 26),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 26),
-};
-
-static struct clksrc_clk clk_audio_bus2 = {
- .clk = {
- .name = "sclk_audio2",
- .devname = "samsung-i2s.0",
- .ctrlbit = (1 << 11),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_audio,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_dout_mpll,
- &clk_armclk,
- &clk_hclk,
- &clk_pclk,
- &clk_hclk_low,
- &clk_pclk_low,
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_i2s0,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_audio_bus2,
-};
-
-static struct clk_lookup s5p6440_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus2.clk),
-};
-
-void __init_or_cpufreq s5p6440_setup_clocks(void)
-{
- struct clk *xtal_clk;
-
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk_low;
- unsigned long pclk;
- unsigned long pclk_low;
-
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned int ptr;
-
- /* Set S5P6440 functions for clk_fout_epll */
-
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5p6440_epll_ops;
-
- clk_48m.enable = s5p64x0_clk48m_ctrl;
-
- xtal_clk = clk_get(NULL, "ext_xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
- epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
- __raw_readl(S5P64X0_EPLL_CON_K));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
-
- printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
- " E=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll));
-
- fclk = clk_get_rate(&clk_armclk.clk);
- hclk = clk_get_rate(&clk_hclk.clk);
- pclk = clk_get_rate(&clk_pclk.clk);
- hclk_low = clk_get_rate(&clk_hclk_low.clk);
- pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
- printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
- " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
- print_mhz(hclk), print_mhz(hclk_low),
- print_mhz(pclk), print_mhz(pclk_low));
-
- clk_f.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_iis_cd_v40,
- &clk_pcm_cd,
-};
-
-void __init s5p6440_register_clocks(void)
-{
- int ptr;
- unsigned int cnt;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
deleted file mode 100644
index 0b3ca2ed53e9..000000000000
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P6450 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "clock.h"
-#include "common.h"
-
-static struct clksrc_clk clk_mout_dpll = {
- .clk = {
- .name = "mout_dpll",
- },
- .sources = &clk_src_dpll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
-};
-
-static u32 epll_div[][5] = {
- { 133000000, 27307, 55, 2, 2 },
- { 100000000, 43691, 41, 2, 2 },
- { 480000000, 0, 80, 2, 0 },
-};
-
-static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P64X0_EPLL_CON);
- epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
-
- epll_con_k &= ~(PLL90XX_KDIV_MASK);
- epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
- epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
- (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
- (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P64X0_EPLL_CON);
- __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5p6450_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5p6450_epll_set_rate,
-};
-
-static struct clksrc_clk clk_dout_epll = {
- .clk = {
- .name = "dout_epll",
- .parent = &clk_mout_epll.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_mout_hclk_sel = {
- .clk = {
- .name = "mout_hclk_sel",
- },
- .sources = &clkset_hclk_low,
- .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
-};
-
-static struct clk *clkset_hclk_list[] = {
- &clk_mout_hclk_sel.clk,
- &clk_armclk.clk,
-};
-
-static struct clksrc_sources clkset_hclk = {
- .sources = clkset_hclk_list,
- .nr_sources = ARRAY_SIZE(clkset_hclk_list),
-};
-
-static struct clksrc_clk clk_hclk = {
- .clk = {
- .name = "clk_hclk",
- },
- .sources = &clkset_hclk,
- .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
- .clk = {
- .name = "clk_pclk",
- .parent = &clk_hclk.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
-};
-static struct clksrc_clk clk_dout_pwm_ratio0 = {
- .clk = {
- .name = "clk_dout_pwm_ratio0",
- .parent = &clk_mout_hclk_sel.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_to_wdt_pwm = {
- .clk = {
- .name = "clk_pclk_to_wdt_pwm",
- .parent = &clk_dout_pwm_ratio0.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
-};
-
-static struct clksrc_clk clk_hclk_low = {
- .clk = {
- .name = "clk_hclk_low",
- },
- .sources = &clkset_hclk_low,
- .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
- .clk = {
- .name = "clk_pclk_low",
- .parent = &clk_hclk_low.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "usbhost",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "usbotg",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "watchdog",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "rtc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "adc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "dmc0",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 30),
- }
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "intc",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mem",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "timers",
- .parent = &clk_pclk_to_wdt_pwm.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "gpio",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 18),
- },
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_mali_list[] = {
- &clk_mout_epll.clk,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_mali = {
- .sources = clkset_mali_list,
- .nr_sources = ARRAY_SIZE(clkset_mali_list),
-};
-
-static struct clk *clkset_group2_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_ext_xtal_mux,
-};
-
-static struct clksrc_sources clkset_group2 = {
- .sources = clkset_group2_list,
- .nr_sources = ARRAY_SIZE(clkset_group2_list),
-};
-
-static struct clk *clkset_dispcon_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_ext_xtal_mux,
- &clk_mout_dpll.clk,
-};
-
-static struct clksrc_sources clkset_dispcon = {
- .sources = clkset_dispcon_list,
- .nr_sources = ARRAY_SIZE(clkset_dispcon_list),
-};
-
-static struct clk *clkset_hsmmc44_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_ext_xtal_mux,
- &s5p_clk_27m,
- &clk_48m,
-};
-
-static struct clksrc_sources clkset_hsmmc44 = {
- .sources = clkset_hsmmc44_list,
- .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list),
-};
-
-static struct clk *clkset_sclk_audio0_list[] = {
- [0] = &clk_dout_epll.clk,
- [1] = &clk_dout_mpll.clk,
- [2] = &clk_ext_xtal_mux,
- [3] = NULL,
- [4] = NULL,
-};
-
-static struct clksrc_sources clkset_sclk_audio0 = {
- .sources = clkset_sclk_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 8),
- .parent = &clk_dout_epll.clk,
- },
- .sources = &clkset_sclk_audio0,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_fimc",
- .ctrlbit = (1 << 10),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "aclk_mali",
- .ctrlbit = (1 << 2),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_mali,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_2d",
- .ctrlbit = (1 << 12),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_mali,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_usi",
- .ctrlbit = (1 << 7),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_camif",
- .ctrlbit = (1 << 6),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_dispcon",
- .ctrlbit = (1 << 1),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_dispcon,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_hsmmc44",
- .ctrlbit = (1 << 30),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_hsmmc44,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 24),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 25),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 26),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 26),
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 15),
-};
-
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 16),
-};
-
-static struct clk *clk_cdev[] = {
- &clk_i2s0,
- &clk_i2s1,
- &clk_i2s2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_audio0,
-};
-
-static struct clk_lookup s5p6450_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_sclk_audio0.clk),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_dout_epll,
- &clk_mout_mpll,
- &clk_dout_mpll,
- &clk_armclk,
- &clk_mout_hclk_sel,
- &clk_dout_pwm_ratio0,
- &clk_pclk_to_wdt_pwm,
- &clk_hclk,
- &clk_pclk,
- &clk_hclk_low,
- &clk_pclk_low,
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-void __init_or_cpufreq s5p6450_setup_clocks(void)
-{
- struct clk *xtal_clk;
-
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk_low;
- unsigned long pclk;
- unsigned long pclk_low;
-
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long dpll;
- unsigned int ptr;
-
- /* Set S5P6450 functions for clk_fout_epll */
-
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5p6450_epll_ops;
-
- clk_48m.enable = s5p64x0_clk48m_ctrl;
-
- xtal_clk = clk_get(NULL, "ext_xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
- epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
- __raw_readl(S5P64X0_EPLL_CON_K));
- dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
- __raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_dpll.rate = dpll;
-
- printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
- " E=%ld.%ldMHz, D=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll),
- print_mhz(dpll));
-
- fclk = clk_get_rate(&clk_armclk.clk);
- hclk = clk_get_rate(&clk_hclk.clk);
- pclk = clk_get_rate(&clk_pclk.clk);
- hclk_low = clk_get_rate(&clk_hclk_low.clk);
- pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
- printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
- " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
- print_mhz(hclk), print_mhz(hclk_low),
- print_mhz(pclk), print_mhz(pclk_low));
-
- clk_f.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-void __init s5p6450_register_clocks(void)
-{
- int ptr;
- unsigned int cnt;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
deleted file mode 100644
index 57e718957ef3..000000000000
--- a/arch/arm/mach-s5p64x0/clock.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
-};
-
-enum perf_level {
- L0 = 532*1000,
- L1 = 266*1000,
- L2 = 133*1000,
-};
-
-static const u32 clock_table[][3] = {
- /*{ARM_CLK, DIVarm, DIVhclk}*/
- {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
- {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
- {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
-};
-
-static unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv;
-
- /* divisor mask starts at bit0, so no need to shift */
- clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
-
- return rate / (clkdiv + 1);
-}
-
-static unsigned long s5p64x0_armclk_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 iter;
-
- for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
- if (rate > clock_table[iter][0])
- return clock_table[iter-1][0];
- }
-
- return clock_table[ARRAY_SIZE(clock_table) - 1][0];
-}
-
-static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 round_tmp;
- u32 iter;
- u32 clk_div0_tmp;
- u32 cur_rate = clk->ops->get_rate(clk);
- unsigned long flags;
-
- round_tmp = clk->ops->round_rate(clk, rate);
- if (round_tmp == cur_rate)
- return 0;
-
-
- for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
- if (round_tmp == clock_table[iter][0])
- break;
- }
-
- if (iter >= ARRAY_SIZE(clock_table))
- iter = ARRAY_SIZE(clock_table) - 1;
-
- local_irq_save(flags);
- if (cur_rate > round_tmp) {
- /* Frequency Down */
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
- clk_div0_tmp |= clock_table[iter][1];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
- ~(S5P64X0_CLKDIV0_HCLK_MASK);
- clk_div0_tmp |= clock_table[iter][2];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-
- } else {
- /* Frequency Up */
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
- ~(S5P64X0_CLKDIV0_HCLK_MASK);
- clk_div0_tmp |= clock_table[iter][2];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
- clk_div0_tmp |= clock_table[iter][1];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
- }
- local_irq_restore(flags);
-
- clk->rate = clock_table[iter][0];
-
- return 0;
-}
-
-static struct clk_ops s5p64x0_clkarm_ops = {
- .get_rate = s5p64x0_armclk_get_rate,
- .set_rate = s5p64x0_armclk_set_rate,
- .round_rate = s5p64x0_armclk_round_rate,
-};
-
-struct clksrc_clk clk_armclk = {
- .clk = {
- .name = "armclk",
- .id = 1,
- .parent = &clk_mout_apll.clk,
- .ops = &s5p64x0_clkarm_ops,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
-};
-
-struct clksrc_clk clk_dout_mpll = {
- .clk = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_hclk_low_list[] = {
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
-};
-
-struct clksrc_sources clkset_hclk_low = {
- .sources = clkset_hclk_low_list,
- .nr_sources = ARRAY_SIZE(clkset_hclk_low_list),
-};
-
-int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
-}
-
-int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
-}
-
-int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
-}
-
-int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
-}
-
-int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
-}
-
-int s5p64x0_mem_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
-}
-
-int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5P64X0_OTHERS);
- if (enable)
- val |= S5P64X0_OTHERS_USB_SIG_MASK;
- else
- val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
-
- __raw_writel(val, S5P64X0_OTHERS);
-
- local_irq_restore(flags);
-
- return 0;
-}
diff --git a/arch/arm/mach-s5p64x0/clock.h b/arch/arm/mach-s5p64x0/clock.h
deleted file mode 100644
index 28b8e3c6bd24..000000000000
--- a/arch/arm/mach-s5p64x0/clock.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p64x0 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_S5P64X0_CLOCK_H
-#define __MACH_S5P64X0_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk clk_mout_apll;
-extern struct clksrc_clk clk_mout_mpll;
-extern struct clksrc_clk clk_mout_epll;
-
-extern int s5p64x0_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
-
-extern struct clksrc_clk clk_armclk;
-extern struct clksrc_clk clk_dout_mpll;
-
-extern struct clksrc_sources clkset_hclk_low;
-
-extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
-
-extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
-
-#endif /* __MACH_S5P64X0_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
deleted file mode 100644
index 9a43be002d78..000000000000
--- a/arch/arm/mach-s5p64x0/common.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Codes for S5P64X0 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-#include <plat/spi-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pwm-core.h>
-#include <plat/regs-irqtype.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6450[] = "S5P6450";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5P6440_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6440_map_io,
- .init_clocks = s5p6440_init_clocks,
- .init_uarts = s5p6440_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6440,
- }, {
- .idcode = S5P6450_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6450_map_io,
- .init_clocks = s5p6450_init_clocks,
- .init_uarts = s5p6450_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6450,
- },
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5p64x0_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5P64X0_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S5P64X0_PA_WDT),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5P64X0_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6440_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6450_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void s5p64x0_idle(void)
-{
- unsigned long val;
-
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
-
- cpu_do_idle();
-}
-
-static struct samsung_pwm_variant s5p64x0_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = 0,
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s5p64x0_pwm_variant);
-}
-
-/*
- * s5p64x0_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(S5P64X0_SYS_ID);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
-
- samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
-}
-
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
- s3c64xx_spi_setname("s5p64x0-spi");
-
- s5p64x0_default_sdhci0();
- s5p64x0_default_sdhci1();
- s5p6440_default_sdhci2();
-
- iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
- s3c64xx_spi_setname("s5p64x0-spi");
-
- s5p64x0_default_sdhci0();
- s5p64x0_default_sdhci1();
- s5p6450_default_sdhci2();
-
- iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
-}
-#endif
-
-/*
- * s5p64x0_init_clocks
- *
- * register and setup the CPU clocks
- */
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6440_register_clocks();
- s5p6440_setup_clocks();
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6450_register_clocks();
- s5p6450_setup_clocks();
-}
-#endif
-
-/*
- * s5p64x0_init_irq
- *
- * register the CPU interrupts
- */
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_init_irq(void)
-{
- /* S5P6440 supports 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
- * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
- */
- vic[0] = 0xff800ae7;
- vic[1] = 0xffbf23e5;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_init_irq(void)
-{
- /* S5P6450 supports only 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
- * VIC1 is missing IRQ VIC1[12, 14, 23]
- */
- vic[0] = 0xff9f1fff;
- vic[1] = 0xff7fafff;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-#endif
-
-struct bus_type s5p64x0_subsys = {
- .name = "s5p64x0-core",
- .dev_name = "s5p64x0-core",
-};
-
-static struct device s5p64x0_dev = {
- .bus = &s5p64x0_subsys,
-};
-
-static int __init s5p64x0_core_init(void)
-{
- return subsys_system_register(&s5p64x0_subsys, NULL);
-}
-core_initcall(s5p64x0_core_init);
-
-int __init s5p64x0_init(void)
-{
- printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
-
- /* set idle function */
- arm_pm_idle = s5p64x0_idle;
-
- return device_register(&s5p64x0_dev);
-}
-
-/* uart registration process */
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- int uart;
-
- for (uart = 0; uart < no; uart++) {
- s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
- s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
- }
-
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-#endif
-
-#define eint_offset(irq) ((irq) - IRQ_EINT(0))
-
-static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = eint_offset(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- if (offs > 15)
- return -EINVAL;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs / 2) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P64X0_EINT0CON0);
-
- /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (soc_is_s5p6450())
- s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-/*
- * s5p64x0_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
- * the specific handlers s5p64x0_irq_demux_eintX_Y.
- */
-static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5P64X0_EINT0PEND);
- u32 mask = __raw_readl(S5P64X0_EINT0MASK);
- unsigned int irq;
-
- status &= ~mask;
- status >>= start;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
- status >>= 1;
- }
-}
-
-static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(0, 3);
-}
-
-static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(4, 11);
-}
-
-static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
- struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(12, 15);
-}
-
-static int s5p64x0_alloc_gc(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
- S5P_VA_GPIO, handle_level_irq);
- if (!gc) {
- printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
- "external interrupts failed\n", __func__);
- return -EINVAL;
- }
-
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
- ct->chip.irq_set_wake = s3c_irqext_wake;
- ct->regs.ack = EINT0PEND_OFFSET;
- ct->regs.mask = EINT0MASK_OFFSET;
- irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-static int __init s5p64x0_init_irq_eint(void)
-{
- int ret = s5p64x0_alloc_gc();
- irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
- irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
- irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
-
- return ret;
-}
-arch_initcall(s5p64x0_init_irq_eint);
-
-void s5p64x0_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
deleted file mode 100644
index cbe7f3d731d0..000000000000
--- a/arch/arm/mach-s5p64x0/common.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S5P64X0 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
-#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
-
-#include <linux/reboot.h>
-
-void s5p6440_init_irq(void);
-void s5p6450_init_irq(void);
-void s5p64x0_init_io(struct map_desc *mach_desc, int size);
-
-void s5p6440_register_clocks(void);
-void s5p6440_setup_clocks(void);
-
-void s5p6450_register_clocks(void);
-void s5p6450_setup_clocks(void);
-
-void s5p64x0_restart(enum reboot_mode mode, const char *cmd);
-extern int s5p64x0_init(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#endif
-
-#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
deleted file mode 100644
index 723d4773c323..000000000000
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_i2s_pdata = {
- .cfg_gpio = s5p6440_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN,
- },
- },
-};
-
-static struct resource s5p64x0_i2s0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
-};
-
-struct platform_device s5p6440_device_iis = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource),
- .resource = s5p64x0_i2s0_resource,
- .dev = {
- .platform_data = &s5p6440_i2s_pdata,
- },
-};
-
-static int s5p6450_cfg_i2s(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
- break;
- case 1:
- s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6450_i2s0_pdata = {
- .cfg_gpio = s5p6450_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN,
- },
- },
-};
-
-struct platform_device s5p6450_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource),
- .resource = s5p64x0_i2s0_resource,
- .dev = {
- .platform_data = &s5p6450_i2s0_pdata,
- },
-};
-
-static struct s3c_audio_pdata s5p6450_i2s_pdata = {
- .cfg_gpio = s5p6450_cfg_i2s,
-};
-
-static struct resource s5p6450_i2s1_resource[] = {
- [0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5p6450_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p6450_i2s1_resource),
- .resource = s5p6450_i2s1_resource,
- .dev = {
- .platform_data = &s5p6450_i2s_pdata,
- },
-};
-
-static struct resource s5p6450_i2s2_resource[] = {
- [0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5p6450_device_iis2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5p6450_i2s2_resource),
- .resource = s5p6450_i2s2_resource,
- .dev = {
- .platform_data = &s5p6450_i2s_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_pcm_pdata = {
- .cfg_gpio = s5p6440_pcm_cfg_gpio,
-};
-
-static struct resource s5p6440_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5p6440_device_pcm = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource),
- .resource = s5p6440_pcm0_resource,
- .dev = {
- .platform_data = &s5p6440_pcm_pdata,
- },
-};
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
deleted file mode 100644
index 9c4ce085f585..000000000000
--- a/arch/arm/mach-s5p64x0/dma.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dma.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-clock.h>
-#include <mach/dma.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-static u8 s5p6440_pdma_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
-};
-
-static struct dma_pl330_platdata s5p6440_pdma_pdata = {
- .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
- .peri_id = s5p6440_pdma_peri,
-};
-
-static u8 s5p6450_pdma_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_UART4_RX,
- DMACH_UART4_TX,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_PCM1_TX,
- DMACH_PCM1_RX,
- DMACH_PCM2_TX,
- DMACH_PCM2_RX,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_USI_TX,
- DMACH_USI_RX,
- DMACH_MAX,
- DMACH_I2S1_TX,
- DMACH_I2S1_RX,
- DMACH_I2S2_TX,
- DMACH_I2S2_RX,
- DMACH_PWM,
- DMACH_UART5_RX,
- DMACH_UART5_TX,
-};
-
-static struct dma_pl330_platdata s5p6450_pdma_pdata = {
- .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
- .peri_id = s5p6450_pdma_peri,
-};
-
-static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
- S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
-
-static int __init s5p64x0_dma_init(void)
-{
- if (soc_is_s5p6450()) {
- dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
- s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
- } else {
- dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
- s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
- }
-
- amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s5p64x0_dma_init);
diff --git a/arch/arm/mach-s5p64x0/i2c.h b/arch/arm/mach-s5p64x0/i2c.h
deleted file mode 100644
index 1e5bb4ea200d..000000000000
--- a/arch/arm/mach-s5p64x0/i2c.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 I2C configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
-
-extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
deleted file mode 100644
index 8759e7882bcb..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0xE0000000
- orr \rp, \rp, #0x00100000
- ldr \rp, [\rp, #0x118 ]
- and \rp, \rp, #0xff000
- teq \rp, #0x50000 @@ S5P6450
- ldreq \rp, =0xEC800000
- movne \rp, #0xEC000000 @@ S5P6440
- ldrne \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
deleted file mode 100644
index 06cd3c9b16ac..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-
-#define S5P6440_GPIO_A_NR (6)
-#define S5P6440_GPIO_B_NR (7)
-#define S5P6440_GPIO_C_NR (8)
-#define S5P6440_GPIO_F_NR (16)
-#define S5P6440_GPIO_G_NR (7)
-#define S5P6440_GPIO_H_NR (10)
-#define S5P6440_GPIO_I_NR (16)
-#define S5P6440_GPIO_J_NR (12)
-#define S5P6440_GPIO_N_NR (16)
-#define S5P6440_GPIO_P_NR (8)
-#define S5P6440_GPIO_R_NR (15)
-
-#define S5P6450_GPIO_A_NR (6)
-#define S5P6450_GPIO_B_NR (7)
-#define S5P6450_GPIO_C_NR (8)
-#define S5P6450_GPIO_D_NR (8)
-#define S5P6450_GPIO_F_NR (16)
-#define S5P6450_GPIO_G_NR (14)
-#define S5P6450_GPIO_H_NR (10)
-#define S5P6450_GPIO_I_NR (16)
-#define S5P6450_GPIO_J_NR (12)
-#define S5P6450_GPIO_K_NR (5)
-#define S5P6450_GPIO_N_NR (16)
-#define S5P6450_GPIO_P_NR (11)
-#define S5P6450_GPIO_Q_NR (14)
-#define S5P6450_GPIO_R_NR (15)
-#define S5P6450_GPIO_S_NR (8)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P64X0_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p6440_gpio_number {
- S5P6440_GPIO_A_START = 0,
- S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
- S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
- S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
- S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
- S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
- S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
- S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
- S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
- S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
- S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
-};
-
-enum s5p6450_gpio_number {
- S5P6450_GPIO_A_START = 0,
- S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
- S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
- S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
- S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
- S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
- S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
- S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
- S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
- S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
- S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
- S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
- S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
- S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
- S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
-};
-
-/* GPIO number definitions */
-
-#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr))
-#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr))
-#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr))
-#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr))
-#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr))
-#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr))
-#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr))
-#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr))
-#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr))
-#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr))
-#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr))
-
-#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr))
-#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr))
-#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr))
-#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr))
-#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr))
-#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr))
-#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr))
-#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr))
-#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr))
-#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr))
-#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr))
-#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr))
-#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr))
-#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr))
-#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr))
-
-/* the end of the S5P64X0 specific gpios */
-
-#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
-#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
-
-#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \
- S5P6440_GPIO_END : S5P6450_GPIO_END)
-
-#define S3C_GPIO_END S5P64X0_GPIO_END
-
-/* define the number of gpios we need to the one after the last GPIO range */
-
-#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h
deleted file mode 100644
index d3e87996dd9a..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
deleted file mode 100644
index 53982db9d259..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
- *
- * Copyright 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-
-#define IRQ_EINT0_3 S5P_IRQ_VIC0(0)
-#define IRQ_EINT4_11 S5P_IRQ_VIC0(1)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(2)
-#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */
-#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */
-#define IRQ_IIC1 S5P_IRQ_VIC0(5)
-#define IRQ_I2SV40 S5P_IRQ_VIC0(6)
-#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */
-
-#define IRQ_2D S5P_IRQ_VIC0(11)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25)
-#define IRQ_WDT S5P_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28)
-#define IRQ_DISPCON0 S5P_IRQ_VIC0(29)
-#define IRQ_DISPCON1 S5P_IRQ_VIC0(30)
-#define IRQ_DISPCON2 S5P_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_15 S5P_IRQ_VIC1(0)
-#define IRQ_PCM0 S5P_IRQ_VIC1(2)
-#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */
-#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */
-#define IRQ_UART0 S5P_IRQ_VIC1(5)
-#define IRQ_UART1 S5P_IRQ_VIC1(6)
-#define IRQ_UART2 S5P_IRQ_VIC1(7)
-#define IRQ_UART3 S5P_IRQ_VIC1(8)
-#define IRQ_DMA0 S5P_IRQ_VIC1(9)
-#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */
-#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */
-#define IRQ_NFC S5P_IRQ_VIC1(13)
-#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */
-#define IRQ_SPI0 S5P_IRQ_VIC1(16)
-#define IRQ_SPI1 S5P_IRQ_VIC1(17)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */
-#define IRQ_IIC S5P_IRQ_VIC1(18)
-#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
-#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
-#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
-#define IRQ_OTG S5P_IRQ_VIC1(26)
-#define IRQ_DSI S5P_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28)
-#define IRQ_TSI S5P_IRQ_VIC1(29)
-#define IRQ_PENDN S5P_IRQ_VIC1(30)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_ADC S5P_IRQ_VIC1(31)
-
-/* UART interrupts, S5P6450 has 5 UARTs */
-#define IRQ_S5P_UART_BASE4 (96)
-#define IRQ_S5P_UART_BASE5 (100)
-
-#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4
-#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5
-
-#define IRQ_I2S0 IRQ_I2SV40
-
-#define IRQ_LCD_FIFO IRQ_DISPCON0
-#define IRQ_LCD_VSYNC IRQ_DISPCON1
-#define IRQ_LCD_SYSTEM IRQ_DISPCON2
-
-/* S5P6450 EINT feature will be added */
-
-/*
- * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
- * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
- * after the pair of VICs.
- */
-
-#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
-
-#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE)
-/*
- * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
- * to wake up from sleep. If request is beyond this range, by mistake, a large
- * return value for an irq number should be indication of something amiss.
- */
-#define S5P_EINT_BASE2 (0xf0000000)
-
-/*
- * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
-#define IRQ_EINT_GROUP1_NR (15)
-#define IRQ_EINT_GROUP2_NR (8)
-#define IRQ_EINT_GROUP5_NR (7)
-#define IRQ_EINT_GROUP6_NR (10)
-/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
-#define IRQ_EINT_GROUP8_NR (11)
-
-#define IRQ_EINT_GROUP_BASE S5P_EINT(16)
-#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0)
-#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-
-#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
deleted file mode 100644
index 50a6e96d6389..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P64X0_PA_SDRAM 0x20000000
-
-#define S5P64X0_PA_CHIPID 0xE0000000
-
-#define S5P64X0_PA_SYSCON 0xE0100000
-
-#define S5P64X0_PA_GPIO 0xE0308000
-
-#define S5P64X0_PA_VIC0 0xE4000000
-#define S5P64X0_PA_VIC1 0xE4100000
-
-#define S5P64X0_PA_SROMC 0xE7000000
-
-#define S5P64X0_PA_PDMA 0xE9000000
-
-#define S5P64X0_PA_TIMER 0xEA000000
-#define S5P64X0_PA_RTC 0xEA100000
-#define S5P64X0_PA_WDT 0xEA200000
-
-#define S5P6440_PA_IIC0 0xEC104000
-#define S5P6440_PA_IIC1 0xEC20F000
-#define S5P6450_PA_IIC0 0xEC100000
-#define S5P6450_PA_IIC1 0xEC200000
-
-#define S5P64X0_PA_SPI0 0xEC400000
-#define S5P64X0_PA_SPI1 0xEC500000
-
-#define S5P64X0_PA_HSOTG 0xED100000
-
-#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5P64X0_PA_FB 0xEE000000
-
-#define S5P64X0_PA_I2S 0xF2000000
-#define S5P6450_PA_I2S1 0xF2800000
-#define S5P6450_PA_I2S2 0xF2900000
-
-#define S5P64X0_PA_PCM 0xF2100000
-
-#define S5P64X0_PA_ADC 0xF3000000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
-#define S3C_PA_IIC S5P6440_PA_IIC0
-#define S3C_PA_IIC1 S5P6440_PA_IIC1
-#define S3C_PA_RTC S5P64X0_PA_RTC
-#define S3C_PA_WDT S5P64X0_PA_WDT
-#define S3C_PA_FB S5P64X0_PA_FB
-#define S3C_PA_SPI0 S5P64X0_PA_SPI0
-#define S3C_PA_SPI1 S5P64X0_PA_SPI1
-
-#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
-#define S5P_PA_SROMC S5P64X0_PA_SROMC
-#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
-#define S5P_PA_TIMER S5P64X0_PA_TIMER
-
-#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
-#define SAMSUNG_PA_TIMER S5P64X0_PA_TIMER
-
-/* UART */
-
-#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
-#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
-
-#define S5P_PA_UART0 S5P6450_PA_UART(0)
-#define S5P_PA_UART1 S5P6450_PA_UART(1)
-#define S5P_PA_UART2 S5P6450_PA_UART(2)
-#define S5P_PA_UART3 S5P6450_PA_UART(3)
-#define S5P_PA_UART4 S5P6450_PA_UART(4)
-#define S5P_PA_UART5 S5P6450_PA_UART(5)
-
-#define S5P_SZ_UART SZ_256
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
deleted file mode 100644
index 1e0eb65b2b82..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
- *
- * Based on PM core support for S3C64XX by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_s3c.h>
-
-#include <mach/regs-gpio.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
- u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
-
- /*
- * As a note, since the S5P64X0 UARTs generally have multiple
- * clock sources, we simply enable PCLK at the moment and hope
- * that the resume settings for the UART are suitable for the
- * use with PCLK.
- */
- tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
- tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
- tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
- tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
-
- __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
- udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- /* VIC should have already been taken care of */
-
- /* clear any pending EINT0 interrupts */
- __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void) { }
-static inline void s3c_pm_arch_show_resume_irqs(void) { }
-
-/*
- * make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on
- */
-#define s3c_irqwake_eintallow ((1 << 16) - 1)
-#define s3c_irqwake_intallow (~0)
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- u32 ucon = __raw_readl(regs + S3C2410_UCON);
- u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
- u32 new_ucon;
- u32 delta;
-
- /*
- * S5P64X0 UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settings.
- */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /*
- * We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /*
- * change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0
- */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /*
- * as a precaution, don't change from
- * PCLK2 => PCLK or vice-versa
- */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
- /* ensure sleep mode has been cleared from the system */
- __raw_writel(0, S5P64X0_SLPEN);
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
- /*
- * turn on the sleep mode and keep it there, as it seems that during
- * suspend the xCON registers get re-set and thus you can end up with
- * problems between going to sleep and resuming.
- */
- __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
-}
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
deleted file mode 100644
index bd91112c813c..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5P64X0_APLL_CON S5P_CLKREG(0x0C)
-#define S5P64X0_MPLL_CON S5P_CLKREG(0x10)
-#define S5P64X0_EPLL_CON S5P_CLKREG(0x14)
-#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18)
-
-#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C)
-
-#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20)
-#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24)
-#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28)
-
-#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30)
-#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34)
-#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38)
-#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C)
-
-#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40)
-
-#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44)
-#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48)
-
-#define S5P6450_DPLL_CON S5P_CLKREG(0x50)
-#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54)
-
-#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100)
-#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C)
-
-#define S5P64X0_SYS_ID S5P_CLKREG(0x118)
-#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C)
-
-#define S5P64X0_PWR_CFG S5P_CLKREG(0x804)
-#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808)
-#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818)
-#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828)
-
-#define S5P64X0_OTHERS S5P_CLKREG(0x900)
-#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908)
-
-#define S5P64X0_INFORM0 S5P_CLKREG(0xA00)
-
-#define S5P64X0_CLKDIV0_HCLK_SHIFT (8)
-#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
-
-/* HCLK GATE Registers */
-#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2)
-#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2)
-
-/* PCLK GATE Registers */
-#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4)
-#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3)
-#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2)
-#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1)
-
-#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15)
-#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14)
-#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11)
-#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10)
-#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5)
-#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5)
-
-#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0)
-
-#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0)
-
-#define S5P6450_OTHERS_DISABLE_INT (1 << 31)
-#define S5P64X0_OTHERS_RET_UART (1 << 26)
-#define S5P64X0_OTHERS_RET_MMC1 (1 << 25)
-#define S5P64X0_OTHERS_RET_MMC0 (1 << 24)
-#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16)
-
-/* Compatibility defines */
-
-#define ARM_CLK_DIV S5P64X0_CLK_DIV0
-#define ARM_DIV_RATIO_SHIFT 0
-#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT)
-
-#define S5P_EPLL_CON S5P64X0_EPLL_CON
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
deleted file mode 100644
index cfdfa4fdadf2..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - GPIO register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* Base addresses for each of the banks */
-
-#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000)
-#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020)
-#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040)
-#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0)
-#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0)
-#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0)
-#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100)
-#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120)
-#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830)
-#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160)
-#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290)
-
-#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060)
-#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140)
-#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
-#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
-
-#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0)
-#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0)
-#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0)
-#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0)
-
-#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0)
-#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4)
-#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0)
-#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4)
-
-#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200)
-#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220)
-#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240)
-
-/* External interrupt control registers for group0 */
-
-#define EINT0CON0_OFFSET (0x900)
-#define EINT0FLTCON0_OFFSET (0x910)
-#define EINT0FLTCON1_OFFSET (0x914)
-#define EINT0MASK_OFFSET (0x920)
-#define EINT0PEND_OFFSET (0x924)
-
-#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
-#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
-#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
-#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
-#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
-
-#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930)
-#define S5P64X0_SLPEN_USE_xSLP (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
deleted file mode 100644
index d60397d1ff40..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
deleted file mode 100644
index 2ed921e095dc..000000000000
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/irq-pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Interrupt handling Power Management
- *
- * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S5P64X0_EINT0CON0),
- SAVE_ITEM(S5P64X0_EINT0FLTCON0),
- SAVE_ITEM(S5P64X0_EINT0FLTCON1),
- SAVE_ITEM(S5P64X0_EINT0MASK),
-};
-
-static struct irq_grp_save {
- u32 con;
- u32 fltcon;
- u32 mask;
-} eint_grp_save[4];
-
-#ifdef CONFIG_SERIAL_SAMSUNG
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-#endif
-
-static int s5p64x0_irq_pm_suspend(void)
-{
- struct irq_grp_save *grp = eint_grp_save;
- int i;
-
- S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
- s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-#ifdef CONFIG_SERIAL_SAMSUNG
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
- irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-#endif
-
- for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
- grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
- grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
- grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
- }
-
- return 0;
-}
-
-static void s5p64x0_irq_pm_resume(void)
-{
- struct irq_grp_save *grp = eint_grp_save;
- int i;
-
- S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
- s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
-#ifdef CONFIG_SERIAL_SAMSUNG
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
- __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-#endif
-
- for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
- __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
- __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
- __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
- }
-
- S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-}
-
-static struct syscore_ops s5p64x0_irq_syscore_ops = {
- .suspend = s5p64x0_irq_pm_suspend,
- .resume = s5p64x0_irq_pm_resume,
-};
-
-static int __init s5p64x0_syscore_init(void)
-{
- register_syscore_ops(&s5p64x0_irq_syscore_ops);
-
- return 0;
-}
-core_initcall(s5p64x0_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
deleted file mode 100644
index 6840e197cb2d..000000000000
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/samsung-time.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-
-#include "common.h"
-#include "i2c.h"
-
-#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_TXTRIG16 | \
- S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdk6440_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdk6440_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
- .win[0] = &smdk6440_fb_win0,
- .vtiming = &smdk6440_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
-};
-
-/* LCD power controller */
-static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- int err;
-
- if (power) {
- err = gpio_request(S5P6440_GPN(5), "GPN");
- if (err) {
- printk(KERN_ERR "failed to request GPN for lcd reset\n");
- return;
- }
-
- gpio_direction_output(S5P6440_GPN(5), 1);
- gpio_set_value(S5P6440_GPN(5), 0);
- gpio_set_value(S5P6440_GPN(5), 1);
- gpio_free(S5P6440_GPN(5));
- }
-}
-
-static struct plat_lcd_data smdk6440_lcd_power_data = {
- .set_power = smdk6440_lte480_reset_power,
-};
-
-static struct platform_device smdk6440_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdk6440_lcd_power_data,
-};
-
-static struct platform_device *smdk6440_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &s5p6440_device_iis,
- &s3c_device_fb,
- &smdk6440_lcd_lte480wv,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6440_i2c0_cfg_gpio,
-};
-
-static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
- .flags = 0,
- .bus_num = 1,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6440_i2c1_cfg_gpio,
-};
-
-static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
- /* To be populated */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
- .no = S5P6440_GPF(15),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6440_bl_data = {
- .pwm_id = 1,
- .enable_gpio = -1,
-};
-
-static void __init smdk6440_map_io(void)
-{
- s5p64x0_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void s5p6440_set_lcd_interface(void)
-{
- unsigned int cfg;
-
- /* select TFT LCD type (RGB I/F) */
- cfg = __raw_readl(S5P64X0_SPCON0);
- cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
- cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
- __raw_writel(cfg, S5P64X0_SPCON0);
-}
-
-static void __init smdk6440_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
- s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
- i2c_register_board_info(0, smdk6440_i2c_devs0,
- ARRAY_SIZE(smdk6440_i2c_devs0));
- i2c_register_board_info(1, smdk6440_i2c_devs1,
- ARRAY_SIZE(smdk6440_i2c_devs1));
-
- s5p6440_set_lcd_interface();
- s3c_fb_set_platdata(&smdk6440_lcd_pdata);
-
- s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
-
- platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
-
- samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
-}
-
-MACHINE_START(SMDK6440, "SMDK6440")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
-
- .init_irq = s5p6440_init_irq,
- .map_io = smdk6440_map_io,
- .init_machine = smdk6440_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5p64x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
deleted file mode 100644
index fa1341c074ca..000000000000
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/samsung-time.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-
-#include "common.h"
-#include "i2c.h"
-
-#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_TXTRIG16 | \
- S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
- [4] = {
- .hwport = 4,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
-#endif
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
- [5] = {
- .hwport = 5,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
-#endif
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdk6450_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdk6450_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
- .win[0] = &smdk6450_fb_win0,
- .vtiming = &smdk6450_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
-};
-
-/* LCD power controller */
-static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- int err;
-
- if (power) {
- err = gpio_request(S5P6450_GPN(5), "GPN");
- if (err) {
- printk(KERN_ERR "failed to request GPN for lcd reset\n");
- return;
- }
-
- gpio_direction_output(S5P6450_GPN(5), 1);
- gpio_set_value(S5P6450_GPN(5), 0);
- gpio_set_value(S5P6450_GPN(5), 1);
- gpio_free(S5P6450_GPN(5));
- }
-}
-
-static struct plat_lcd_data smdk6450_lcd_power_data = {
- .set_power = smdk6450_lte480_reset_power,
-};
-
-static struct platform_device smdk6450_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdk6450_lcd_power_data,
-};
-
-static struct platform_device *smdk6450_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &s5p6450_device_iis0,
- &s3c_device_fb,
- &smdk6450_lcd_lte480wv,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- /* s5p6450_device_spi0 will be added */
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6450_i2c0_cfg_gpio,
-};
-
-static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
- .flags = 0,
- .bus_num = 1,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6450_i2c1_cfg_gpio,
-};
-
-static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("wm8580", 0x1b), },
- { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */
-};
-
-static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
- .no = S5P6450_GPF(15),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6450_bl_data = {
- .pwm_id = 1,
- .enable_gpio = -1,
-};
-
-static void __init smdk6450_map_io(void)
-{
- s5p64x0_init_io(NULL, 0);
- s3c24xx_init_clocks(19200000);
- s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void s5p6450_set_lcd_interface(void)
-{
- unsigned int cfg;
-
- /* select TFT LCD type (RGB I/F) */
- cfg = __raw_readl(S5P64X0_SPCON0);
- cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
- cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
- __raw_writel(cfg, S5P64X0_SPCON0);
-}
-
-static void __init smdk6450_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
- s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
- i2c_register_board_info(0, smdk6450_i2c_devs0,
- ARRAY_SIZE(smdk6450_i2c_devs0));
- i2c_register_board_info(1, smdk6450_i2c_devs1,
- ARRAY_SIZE(smdk6450_i2c_devs1));
-
- s5p6450_set_lcd_interface();
- s3c_fb_set_platdata(&smdk6450_lcd_pdata);
-
- s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
-
- platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
-
- samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
-}
-
-MACHINE_START(SMDK6450, "SMDK6450")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
-
- .init_irq = s5p6450_init_irq,
- .map_io = smdk6450_map_io,
- .init_machine = smdk6450_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5p64x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
deleted file mode 100644
index ec8229cee716..000000000000
--- a/arch/arm/mach-s5p64x0/pm.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 Power Management Support
- *
- * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-static struct sleep_save s5p64x0_core_save[] = {
- SAVE_ITEM(S5P64X0_APLL_CON),
- SAVE_ITEM(S5P64X0_MPLL_CON),
- SAVE_ITEM(S5P64X0_EPLL_CON),
- SAVE_ITEM(S5P64X0_EPLL_CON_K),
- SAVE_ITEM(S5P64X0_CLK_SRC0),
- SAVE_ITEM(S5P64X0_CLK_SRC1),
- SAVE_ITEM(S5P64X0_CLK_DIV0),
- SAVE_ITEM(S5P64X0_CLK_DIV1),
- SAVE_ITEM(S5P64X0_CLK_DIV2),
- SAVE_ITEM(S5P64X0_CLK_DIV3),
- SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
- SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
- SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
-};
-
-static struct sleep_save s5p64x0_misc_save[] = {
- SAVE_ITEM(S5P64X0_AHB_CON0),
- SAVE_ITEM(S5P64X0_SPCON0),
- SAVE_ITEM(S5P64X0_SPCON1),
- SAVE_ITEM(S5P64X0_MEM0CONSLP0),
- SAVE_ITEM(S5P64X0_MEM0CONSLP1),
- SAVE_ITEM(S5P64X0_MEM0DRVCON),
- SAVE_ITEM(S5P64X0_MEM1DRVCON),
-};
-
-/* DPLL is present only in S5P6450 */
-static struct sleep_save s5p6450_core_save[] = {
- SAVE_ITEM(S5P6450_DPLL_CON),
- SAVE_ITEM(S5P6450_DPLL_CON_K),
-};
-
-void s3c_pm_configure_extint(void)
-{
- __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
- __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
-
- s3c_pm_do_restore_core(s5p64x0_core_save,
- ARRAY_SIZE(s5p64x0_core_save));
-
- if (soc_is_s5p6450())
- s3c_pm_do_restore_core(s5p6450_core_save,
- ARRAY_SIZE(s5p6450_core_save));
-
- s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
- s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
-
- if (soc_is_s5p6450())
- s3c_pm_do_save(s5p6450_core_save,
- ARRAY_SIZE(s5p6450_core_save));
-
- s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
-}
-
-static int s5p64x0_cpu_suspend(unsigned long arg)
-{
- unsigned long tmp = 0;
-
- /*
- * Issue the standby signal into the pm unit. Note, we
- * issue a write-buffer drain just in case.
- */
- asm("b 1f\n\t"
- ".align 5\n\t"
- "1:\n\t"
- "mcr p15, 0, %0, c7, c10, 5\n\t"
- "mcr p15, 0, %0, c7, c10, 4\n\t"
- "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
-
- pr_info("Failed to suspend the system\n");
- return 1; /* Aborting suspend */
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
- { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
- { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
- { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
- { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
-};
-
-static void s5p64x0_pm_prepare(void)
-{
- u32 tmp;
-
- samsung_sync_wakemask(S5P64X0_PWR_CFG,
- s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
-
- /* store the resume address in INFORM0 register */
- __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
-
- /* setup clock gating for FIMGVG block */
- __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
- (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
- __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
- (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
-
- /* Configure the stabilization counter with wait time required */
- __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
-
- /* set WFI to SLEEP mode configuration */
- tmp = __raw_readl(S5P64X0_SLEEP_CFG);
- tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
- __raw_writel(tmp, S5P64X0_SLEEP_CFG);
-
- tmp = __raw_readl(S5P64X0_PWR_CFG);
- tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
- tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
- __raw_writel(tmp, S5P64X0_PWR_CFG);
-
- /*
- * set OTHERS register to disable interrupt before going to
- * sleep. This bit is present only in S5P6450, it is reserved
- * in S5P6440.
- */
- if (soc_is_s5p6450()) {
- tmp = __raw_readl(S5P64X0_OTHERS);
- tmp |= S5P6450_OTHERS_DISABLE_INT;
- __raw_writel(tmp, S5P64X0_OTHERS);
- }
-
- /* ensure previous wakeup state is cleared before sleeping */
- __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
-
-}
-
-static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
-{
- pm_cpu_prep = s5p64x0_pm_prepare;
- pm_cpu_sleep = s5p64x0_cpu_suspend;
-
- return 0;
-}
-
-static struct subsys_interface s5p64x0_pm_interface = {
- .name = "s5p64x0_pm",
- .subsys = &s5p64x0_subsys,
- .add_dev = s5p64x0_pm_add,
-};
-
-static __init int s5p64x0_pm_drvinit(void)
-{
- s3c_pm_init();
-
- return subsys_interface_register(&s5p64x0_pm_interface);
-}
-arch_initcall(s5p64x0_pm_drvinit);
-
-static void s5p64x0_pm_resume(void)
-{
- u32 tmp;
-
- tmp = __raw_readl(S5P64X0_OTHERS);
- tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
- S5P64X0_OTHERS_RET_UART);
- __raw_writel(tmp , S5P64X0_OTHERS);
-}
-
-static struct syscore_ops s5p64x0_pm_syscore_ops = {
- .resume = s5p64x0_pm_resume,
-};
-
-static __init int s5p64x0_pm_syscore_init(void)
-{
- register_syscore_ops(&s5p64x0_pm_syscore_ops);
-
- return 0;
-}
-arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
deleted file mode 100644
index f346ee4af54d..000000000000
--- a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base S5P64X0 GPIO setup information for LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-void s5p64x0_fb_gpio_setup_24bpp(void)
-{
- if (soc_is_s5p6440()) {
- s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
- } else if (soc_is_s5p6450()) {
- s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
- }
-}
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
deleted file mode 100644
index 569b76ac98cb..000000000000
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64x0/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "i2c.h"
-
-void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
-
-void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
deleted file mode 100644
index 867374e6d0bc..000000000000
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * I2C1 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "i2c.h"
-
-void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
- S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
-
-void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
- S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
deleted file mode 100644
index 8410af0d12bf..000000000000
--- a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <plat/cpu.h>
-
-void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG pins to special-function 2 */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
- S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
- S3C_GPIO_SFN(2));
-
- /* Set GPG[6] pin to special-function 2 - MMC0 CDn */
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- if (soc_is_s5p6450()) {
- s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
- } else {
- s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
- }
- }
-}
-
-void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
-
- switch (width) {
- case 8:
- /* Set data pins GPH[6:9] special-function 2 */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
- S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
- S3C_GPIO_SFN(2));
- case 4:
- /* set data pins GPH[2:5] special-function 2 */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
- S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
- S3C_GPIO_SFN(2));
- default:
- break;
- }
-
- /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- if (soc_is_s5p6450()) {
- s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
- } else {
- s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
- }
- }
-}
-
-void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
- s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
-
- /* Set data pins GPH[6:9] pins to special-function 3 */
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
-}
-
-void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- /* Set all the necessary GPG pins to special-function 3 */
- s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
deleted file mode 100644
index 7664356720ca..000000000000
--- a/arch/arm/mach-s5p64x0/setup-spi.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- if (soc_is_s5p6450())
- s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- else
- s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- if (soc_is_s5p6450())
- s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- else
- s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
deleted file mode 100644
index c5e3a969b063..000000000000
--- a/arch/arm/mach-s5pc100/Kconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5PC100 CPU
-
-if ARCH_S5PC100
-
-config CPU_S5PC100
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_EXT_INT
- help
- Enable S5PC100 CPU support
-
-config S5PC100_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC100_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S5PC100_SETUP_IDE
- bool
- help
- Common setup code for S5PC100 IDE GPIO configurations
-
-config S5PC100_SETUP_KEYPAD
- bool
- help
- Common setup code for KEYPAD GPIO configurations.
-
-config S5PC100_SETUP_SDHCI
- bool
- select S5PC100_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S5PC100 based SDHCI systems
-
-config S5PC100_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config S5PC100_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations.
-
-config MACH_SMDKC100
- bool "SMDKC100"
- select CPU_S5PC100
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5PC100_SETUP_FB_24BPP
- select S5PC100_SETUP_I2C1
- select S5PC100_SETUP_IDE
- select S5PC100_SETUP_KEYPAD
- select S5PC100_SETUP_SDHCI
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDKC100
-
-endif
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
deleted file mode 100644
index 118c711f74e8..000000000000
--- a/arch/arm/mach-s5pc100/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# arch/arm/mach-s5pc100/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core
-
-obj-y += common.o clock.o
-
-obj-y += dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
-
-# device support
-
-obj-y += dev-audio.o
-
-obj-y += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
deleted file mode 100644
index 79ece4055b02..000000000000
--- a/arch/arm/mach-s5pc100/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
deleted file mode 100644
index d0dc10ee7729..000000000000
--- a/arch/arm/mach-s5pc100/clock.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PC100 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static struct clk s5p_clk_otgphy = {
- .name = "otg_phy",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static struct clk *clk_src_mout_href_list[] = {
- [0] = &s5p_clk_27m,
- [1] = &clk_fin_hpll,
-};
-
-static struct clksrc_sources clk_src_mout_href = {
- .sources = clk_src_mout_href_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
-};
-
-static struct clksrc_clk clk_mout_href = {
- .clk = {
- .name = "mout_href",
- },
- .sources = &clk_src_mout_href,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
-};
-
-static struct clk *clk_src_mout_48m_list[] = {
- [0] = &clk_xusbxti,
- [1] = &s5p_clk_otgphy,
-};
-
-static struct clksrc_sources clk_src_mout_48m = {
- .sources = clk_src_mout_48m_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
-};
-
-static struct clksrc_clk clk_mout_48m = {
- .clk = {
- .name = "mout_48m",
- },
- .sources = &clk_src_mout_48m,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-static struct clk *clk_src_mout_hpll_list[] = {
- [0] = &s5p_clk_27m,
-};
-
-static struct clksrc_sources clk_src_mout_hpll = {
- .sources = clk_src_mout_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- },
- .sources = &clk_src_mout_hpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_apll = {
- .clk = {
- .name = "div_apll",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_arm = {
- .clk = {
- .name = "div_arm",
- .parent = &clk_div_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_d0_bus = {
- .clk = {
- .name = "div_d0_bus",
- .parent = &clk_div_arm.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_pclkd0 = {
- .clk = {
- .name = "div_pclkd0",
- .parent = &clk_div_d0_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_secss = {
- .clk = {
- .name = "div_secss",
- .parent = &clk_div_d0_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_apll2 = {
- .clk = {
- .name = "div_apll2",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
-};
-
-static struct clk *clk_src_mout_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_div_apll2.clk,
-};
-
-static struct clksrc_sources clk_src_mout_am = {
- .sources = clk_src_mout_am_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- },
- .sources = &clk_src_mout_am,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_d1_bus = {
- .clk = {
- .name = "div_d1_bus",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_mpll2 = {
- .clk = {
- .name = "div_mpll2",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_mpll = {
- .clk = {
- .name = "div_mpll",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
-};
-
-static struct clk *clk_src_mout_onenand_list[] = {
- [0] = &clk_div_d0_bus.clk,
- [1] = &clk_div_d1_bus.clk,
-};
-
-static struct clksrc_sources clk_src_mout_onenand = {
- .sources = clk_src_mout_onenand_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- },
- .sources = &clk_src_mout_onenand,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_onenand = {
- .clk = {
- .name = "div_onenand",
- .parent = &clk_mout_onenand.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
-};
-
-static struct clksrc_clk clk_div_pclkd1 = {
- .clk = {
- .name = "div_pclkd1",
- .parent = &clk_div_d1_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_cam = {
- .clk = {
- .name = "div_cam",
- .parent = &clk_div_mpll2.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
-};
-
-static struct clksrc_clk clk_div_hdmi = {
- .clk = {
- .name = "div_hdmi",
- .parent = &clk_mout_hpll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
-};
-
-static u32 epll_div[][4] = {
- { 32750000, 131, 3, 4 },
- { 32768000, 131, 3, 4 },
- { 36000000, 72, 3, 3 },
- { 45000000, 90, 3, 3 },
- { 45158000, 90, 3, 3 },
- { 45158400, 90, 3, 3 },
- { 48000000, 96, 3, 3 },
- { 49125000, 131, 4, 3 },
- { 49152000, 131, 4, 3 },
- { 60000000, 120, 3, 3 },
- { 67737600, 226, 5, 3 },
- { 67738000, 226, 5, 3 },
- { 73800000, 246, 5, 3 },
- { 73728000, 246, 5, 3 },
- { 72000000, 144, 3, 3 },
- { 84000000, 168, 3, 3 },
- { 96000000, 96, 3, 2 },
- { 144000000, 144, 3, 2 },
- { 192000000, 96, 3, 1 }
-};
-
-static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P_EPLL_CON);
-
- epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
- (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
- (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5pc100_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5pc100_epll_set_rate,
-};
-
-static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
-}
-
-static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "cssys",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "secss",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "g2d",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "mdma",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "cfcon",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "nfcon",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "onenandc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sdm",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_2_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "seckey",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_2_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "modemif",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "otg",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "usbhost",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "lcd",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "rotator",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.2",
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "jpeg",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "mipi-dsim",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "mipi-csis",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "g3d",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "tv",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "vp",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mixer",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "hdmi",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "mfc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "apc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "iec",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "systimer",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "watchdog",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "rtc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "irda",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "ccan",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "ccan",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "hsitx",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsirx",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "ac97",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.0",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "spdif",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "adc",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "keypad",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 17),
- },
-};
-
-static struct clk clk_hsmmc2 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 7),
-};
-
-static struct clk clk_hsmmc1 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 6),
-};
-
-static struct clk clk_hsmmc0 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 5),
-};
-
-static struct clk clk_48m_spi0 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 7),
-};
-
-static struct clk clk_48m_spi1 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 8),
-};
-
-static struct clk clk_48m_spi2 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 9),
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 2),
-};
-
-static struct clk clk_vclk54m = {
- .name = "vclk_54m",
- .rate = 54000000,
-};
-
-static struct clk clk_i2scdclk0 = {
- .name = "i2s_cdclk0",
-};
-
-static struct clk clk_i2scdclk1 = {
- .name = "i2s_cdclk1",
-};
-
-static struct clk clk_i2scdclk2 = {
- .name = "i2s_cdclk2",
-};
-
-static struct clk clk_pcmcdclk0 = {
- .name = "pcm_cdclk0",
-};
-
-static struct clk clk_pcmcdclk1 = {
- .name = "pcm_cdclk1",
-};
-
-static struct clk *clk_src_group1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll2.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group1 = {
- .sources = clk_src_group1_list,
- .nr_sources = ARRAY_SIZE(clk_src_group1_list),
-};
-
-static struct clk *clk_src_group2_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_group2 = {
- .sources = clk_src_group2_list,
- .nr_sources = ARRAY_SIZE(clk_src_group2_list),
-};
-
-static struct clk *clk_src_group3_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk0,
- [4] = &clk_pcmcdclk0,
- [5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group3 = {
- .sources = clk_src_group3_list,
- .nr_sources = ARRAY_SIZE(clk_src_group3_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.0",
- .ctrlbit = (1 << 8),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group3,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-};
-
-static struct clk *clk_src_group4_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk1,
- [4] = &clk_pcmcdclk1,
- [5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group4 = {
- .sources = clk_src_group4_list,
- .nr_sources = ARRAY_SIZE(clk_src_group4_list),
-};
-
-static struct clksrc_clk clk_sclk_audio1 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.1",
- .ctrlbit = (1 << 9),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group4,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-};
-
-static struct clk *clk_src_group5_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk2,
- [4] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group5 = {
- .sources = clk_src_group5_list,
- .nr_sources = ARRAY_SIZE(clk_src_group5_list),
-};
-
-static struct clksrc_clk clk_sclk_audio2 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.2",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group5,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-};
-
-static struct clk *clk_src_group6_list[] = {
- [0] = &s5p_clk_27m,
- [1] = &clk_vclk54m,
- [2] = &clk_div_hdmi.clk,
-};
-
-static struct clksrc_sources clk_src_group6 = {
- .sources = clk_src_group6_list,
- .nr_sources = ARRAY_SIZE(clk_src_group6_list),
-};
-
-static struct clk *clk_src_group7_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_mout_hpll.clk,
- [3] = &clk_vclk54m,
-};
-
-static struct clksrc_sources clk_src_group7 = {
- .sources = clk_src_group7_list,
- .nr_sources = ARRAY_SIZE(clk_src_group7_list),
-};
-
-static struct clk *clk_src_mmc0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
-};
-
-static struct clksrc_sources clk_src_mmc0 = {
- .sources = clk_src_mmc0_list,
- .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
-};
-
-static struct clk *clk_src_mmc12_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_mmc12 = {
- .sources = clk_src_mmc12_list,
- .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
-};
-
-static struct clk *clk_src_irda_usb_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_irda_usb = {
- .sources = clk_src_irda_usb_list,
- .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
-};
-
-static struct clk *clk_src_pwi_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_mout_epll.clk,
- [2] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_pwi = {
- .sources = clk_src_pwi_list,
- .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
-};
-
-static struct clk *clk_sclk_spdif_list[] = {
- [0] = &clk_sclk_audio0.clk,
- [1] = &clk_sclk_audio1.clk,
- [2] = &clk_sclk_audio2.clk,
-};
-
-static struct clksrc_sources clk_src_sclk_spdif = {
- .sources = clk_sclk_spdif_list,
- .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
-};
-
-static struct clksrc_clk clk_sclk_spdif = {
- .clk = {
- .name = "sclk_spdif",
- .ctrlbit = (1 << 11),
- .enable = s5pc100_sclk1_ctrl,
- .ops = &s5p_sclk_spdif_ops,
- },
- .sources = &clk_src_sclk_spdif,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_mixer",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group6,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
- }, {
- .clk = {
- .name = "sclk_lcd",
- .ctrlbit = (1 << 0),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.0",
- .ctrlbit = (1 << 1),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.1",
- .ctrlbit = (1 << 2),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.2",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_irda",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_irda_usb,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_irda",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_pwi",
- .ctrlbit = (1 << 1),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_pwi,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
- }, {
- .clk = {
- .name = "sclk_uhost",
- .ctrlbit = (1 << 11),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_irda_usb,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_uart = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group2,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 12),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc0,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 13),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 14),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.0",
- .ctrlbit = (1 << 4),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.1",
- .ctrlbit = (1 << 5),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.2",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_mout_hpll,
- &clk_mout_href,
- &clk_mout_48m,
- &clk_div_apll,
- &clk_div_arm,
- &clk_div_d0_bus,
- &clk_div_pclkd0,
- &clk_div_secss,
- &clk_div_apll2,
- &clk_mout_am,
- &clk_div_d1_bus,
- &clk_div_mpll2,
- &clk_div_mpll,
- &clk_mout_onenand,
- &clk_div_onenand,
- &clk_div_pclkd1,
- &clk_div_cam,
- &clk_div_hdmi,
- &clk_sclk_audio0,
- &clk_sclk_audio1,
- &clk_sclk_audio2,
- &clk_sclk_spdif,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_hsmmc0,
- &clk_hsmmc1,
- &clk_hsmmc2,
- &clk_48m_spi0,
- &clk_48m_spi1,
- &clk_48m_spi2,
- &clk_i2s0,
- &clk_i2s1,
- &clk_i2s2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uart,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_spi2,
-};
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- unsigned long xtal;
- unsigned long arm;
- unsigned long hclkd0;
- unsigned long hclkd1;
- unsigned long pclkd0;
- unsigned long pclkd1;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long hpll;
- unsigned int ptr;
-
- /* Set S5PC100 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5pc100_epll_ops;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal = clk_get_rate(&clk_xtal);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
- mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
- epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
- hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_mout_hpll.clk.rate = hpll;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-
- arm = clk_get_rate(&clk_div_arm.clk);
- hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
- pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
- hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
- pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
-
- printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
- print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
-
- clk_f.rate = arm;
- clk_h.rate = hclkd1;
- clk_p.rate = pclkd1;
-}
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "tzic",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "intc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "ebi",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "intmem",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sromc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "dmc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "chipid",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "gpio",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "timers",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 6),
- },
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_i2scdclk0,
- &clk_i2scdclk1,
- &clk_i2scdclk2,
- &clk_pcmcdclk0,
- &clk_pcmcdclk1,
-};
-
-static struct clk_lookup s5pc100_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
- CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
- CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
- CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-};
-
-void __init s5pc100_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
- s3c_disable_clocks(clk_cdev[ptr], 1);
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
deleted file mode 100644
index 6a41bf7dacf6..000000000000
--- a/arch/arm/mach-s5pc100/common.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Common Codes for S5PC100
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-#include <plat/pwm-core.h>
-#include <plat/spi-core.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5PC100_CPU_ID,
- .idmask = S5PC100_CPU_MASK,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pc100_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC100_VA_OTHERS,
- .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }
-};
-
-static struct samsung_pwm_variant s5pc100_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = (1 << 5),
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s5pc100_pwm_variant);
-}
-
-/*
- * s5pc100_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(S5P_VA_CHIPID);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
- samsung_pwm_set_platdata(&s5pc100_pwm_variant);
-}
-
-void __init s5pc100_map_io(void)
-{
- /* initialise device information early */
- s5pc100_default_sdhci0();
- s5pc100_default_sdhci1();
- s5pc100_default_sdhci2();
-
- s3c_adc_setname("s3c64xx-adc");
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_onenand_setname("s5pc100-onenand");
- s3c_fb_setname("s5pc100-fb");
- s3c_cfcon_setname("s5pc100-pata");
-
- s3c64xx_spi_setname("s5pc100-spi");
-}
-
-void __init s5pc100_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5pc100_register_clocks();
- s5pc100_setup_clocks();
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
-}
-
-void __init s5pc100_init_irq(void)
-{
- u32 vic[] = {~0, ~0, ~0};
-
- /* VIC0, VIC1, and VIC2 are fully populated. */
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-static struct bus_type s5pc100_subsys = {
- .name = "s5pc100-core",
- .dev_name = "s5pc100-core",
-};
-
-static struct device s5pc100_dev = {
- .bus = &s5pc100_subsys,
-};
-
-static int __init s5pc100_core_init(void)
-{
- return subsys_system_register(&s5pc100_subsys, NULL);
-}
-core_initcall(s5pc100_core_init);
-
-int __init s5pc100_init(void)
-{
- printk(KERN_INFO "S5PC100: Initializing architecture\n");
- return device_register(&s5pc100_dev);
-}
-
-/* uart registration process */
-
-void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
deleted file mode 100644
index 08d782d65d7b..000000000000
--- a/arch/arm/mach-s5pc100/common.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S5PC100 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
-#define __ARCH_ARM_MACH_S5PC100_COMMON_H
-
-#include <linux/reboot.h>
-
-void s5pc100_init_io(struct map_desc *mach_desc, int size);
-void s5pc100_init_irq(void);
-
-void s5pc100_register_clocks(void);
-void s5pc100_setup_clocks(void);
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd);
-
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
deleted file mode 100644
index 46f488b09391..000000000000
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5pc100_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 0: /* Dedicated pins */
- break;
- case 1:
- s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
- .cfg_gpio = s5pc100_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
- | QUIRK_NEED_RSTCLR,
- },
- },
-};
-
-static struct resource s5pc100_iis0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
- [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
-};
-
-struct platform_device s5pc100_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_iis0_resource),
- .resource = s5pc100_iis0_resource,
- .dev = {
- .platform_data = &i2sv5_pdata,
- },
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = s5pc100_cfg_i2s,
-};
-
-static struct resource s5pc100_iis1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5pc100_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_iis1_resource),
- .resource = s5pc100_iis1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-static struct resource s5pc100_iis2_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5pc100_device_iis2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pc100_iis2_resource),
- .resource = s5pc100_iis2_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
- break;
-
- case 1:
- s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = s5pc100_pcm_cfg_gpio,
-};
-
-static struct resource s5pc100_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5pc100_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource),
- .resource = s5pc100_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5pc100_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
-};
-
-struct platform_device s5pc100_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource),
- .resource = s5pc100_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pc100_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
- [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
- [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
- [4] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
- .cfg_gpio = s5pc100_ac97_cfg_gpio,
-};
-
-static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pc100_ac97_resource),
- .resource = s5pc100_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &s5pc100_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/* S/PDIF Controller platform_device */
-static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static struct resource s5pc100_spdif_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPDIF),
-};
-
-static struct s3c_audio_pdata s5p_spdif_pdata = {
- .cfg_gpio = s5pc100_spdif_cfg_gpd,
-};
-
-static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spdif = {
- .name = "samsung-spdif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pc100_spdif_resource),
- .resource = s5pc100_spdif_resource,
- .dev = {
- .platform_data = &s5p_spdif_pdata,
- .dma_mask = &s5pc100_spdif_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5pc100_spdif_setup_gpio(int gpio)
-{
- if (gpio == S5PC100_SPDIF_GPD)
- s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
- else
- s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
-}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
deleted file mode 100644
index b1418409709e..000000000000
--- a/arch/arm/mach-s5pc100/dma.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 pdma0_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_EXTERNAL,
- DMACH_PWM,
- DMACH_SPDIF,
- DMACH_HSI_RX,
- DMACH_HSI_TX,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
- S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_MSM_REQ0,
- DMACH_MSM_REQ1,
- DMACH_MSM_REQ2,
- DMACH_MSM_REQ3,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
- S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
-
-static int __init s5pc100_dma_init(void)
-{
- dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
-
- dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s5pc100_dma_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
deleted file mode 100644
index 22c23859e45e..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- *
- * Based on mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
deleted file mode 100644
index bad0700457db..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for the Samsung S5PC1XX series
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
deleted file mode 100644
index 5e1a924b595f..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO lib support
- *
- * Base on mach-s3c6400/include/mach/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-#define S5PC100_GPIO_A0_NR (8)
-#define S5PC100_GPIO_A1_NR (5)
-#define S5PC100_GPIO_B_NR (8)
-#define S5PC100_GPIO_C_NR (5)
-#define S5PC100_GPIO_D_NR (7)
-#define S5PC100_GPIO_E0_NR (8)
-#define S5PC100_GPIO_E1_NR (6)
-#define S5PC100_GPIO_F0_NR (8)
-#define S5PC100_GPIO_F1_NR (8)
-#define S5PC100_GPIO_F2_NR (8)
-#define S5PC100_GPIO_F3_NR (4)
-#define S5PC100_GPIO_G0_NR (8)
-#define S5PC100_GPIO_G1_NR (3)
-#define S5PC100_GPIO_G2_NR (7)
-#define S5PC100_GPIO_G3_NR (7)
-#define S5PC100_GPIO_H0_NR (8)
-#define S5PC100_GPIO_H1_NR (8)
-#define S5PC100_GPIO_H2_NR (8)
-#define S5PC100_GPIO_H3_NR (8)
-#define S5PC100_GPIO_I_NR (8)
-#define S5PC100_GPIO_J0_NR (8)
-#define S5PC100_GPIO_J1_NR (5)
-#define S5PC100_GPIO_J2_NR (8)
-#define S5PC100_GPIO_J3_NR (8)
-#define S5PC100_GPIO_J4_NR (4)
-#define S5PC100_GPIO_K0_NR (8)
-#define S5PC100_GPIO_K1_NR (6)
-#define S5PC100_GPIO_K2_NR (8)
-#define S5PC100_GPIO_K3_NR (8)
-#define S5PC100_GPIO_L0_NR (8)
-#define S5PC100_GPIO_L1_NR (8)
-#define S5PC100_GPIO_L2_NR (8)
-#define S5PC100_GPIO_L3_NR (8)
-#define S5PC100_GPIO_L4_NR (8)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PC100_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- S5PC100_GPIO_A0_START = 0,
- S5PC100_GPIO_A1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
- S5PC100_GPIO_B_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
- S5PC100_GPIO_C_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
- S5PC100_GPIO_D_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
- S5PC100_GPIO_E0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
- S5PC100_GPIO_E1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
- S5PC100_GPIO_F0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
- S5PC100_GPIO_F1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
- S5PC100_GPIO_F2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
- S5PC100_GPIO_F3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
- S5PC100_GPIO_G0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
- S5PC100_GPIO_G1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
- S5PC100_GPIO_G2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
- S5PC100_GPIO_G3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
- S5PC100_GPIO_H0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
- S5PC100_GPIO_H1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
- S5PC100_GPIO_H2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
- S5PC100_GPIO_H3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
- S5PC100_GPIO_I_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
- S5PC100_GPIO_J0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
- S5PC100_GPIO_J1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
- S5PC100_GPIO_J2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
- S5PC100_GPIO_J3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
- S5PC100_GPIO_J4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
- S5PC100_GPIO_K0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
- S5PC100_GPIO_K1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
- S5PC100_GPIO_K2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
- S5PC100_GPIO_K3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
- S5PC100_GPIO_L0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
- S5PC100_GPIO_L1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
- S5PC100_GPIO_L2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
- S5PC100_GPIO_L3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
- S5PC100_GPIO_L4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
- S5PC100_GPIO_END = S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
-};
-
-/* S5PC100 GPIO number definitions. */
-#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr))
-#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr))
-#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr))
-#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr))
-#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr))
-#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr))
-#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr))
-#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr))
-#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr))
-#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr))
-#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr))
-#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr))
-#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr))
-#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr))
-#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr))
-#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr))
-#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr))
-#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr))
-#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr))
-#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr))
-#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr))
-#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr))
-#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr))
-#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr))
-#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr))
-#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr))
-#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr))
-#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr))
-#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr))
-#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr))
-#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr))
-#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
-#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
-#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
-
-/* It used the end of the S5PC100 gpios */
-#define S3C_GPIO_END S5PC100_GPIO_END
-
-/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
deleted file mode 100644
index 6b38618c2fd9..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
deleted file mode 100644
index d2eb4757381f..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: system, DMA, timer */
-#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
-#define IRQ_BATF S5P_IRQ_VIC0(17)
-#define IRQ_MDMA S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
-#define IRQ_WDT S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
-
-/* VIC1: ARM, power, memory, connectivity */
-#define IRQ_PMU S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND S5P_IRQ_VIC1(7)
-#define IRQ_NFC S5P_IRQ_VIC1(8)
-#define IRQ_CFCON S5P_IRQ_VIC1(9)
-#define IRQ_UART0 S5P_IRQ_VIC1(10)
-#define IRQ_UART1 S5P_IRQ_VIC1(11)
-#define IRQ_UART2 S5P_IRQ_VIC1(12)
-#define IRQ_UART3 S5P_IRQ_VIC1(13)
-#define IRQ_IIC S5P_IRQ_VIC1(14)
-#define IRQ_SPI0 S5P_IRQ_VIC1(15)
-#define IRQ_SPI1 S5P_IRQ_VIC1(16)
-#define IRQ_SPI2 S5P_IRQ_VIC1(17)
-#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC3 S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX S5P_IRQ_VIC1(21)
-#define IRQ_HSITX S5P_IRQ_VIC1(22)
-#define IRQ_UHOST S5P_IRQ_VIC1(23)
-#define IRQ_OTG S5P_IRQ_VIC1(24)
-#define IRQ_MSM S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
-
-/* VIC2: multimedia, audio, security */
-#define IRQ_LCD0 S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
-#define IRQ_JPEG S5P_IRQ_VIC2(8)
-#define IRQ_2D S5P_IRQ_VIC2(9)
-#define IRQ_3D S5P_IRQ_VIC2(10)
-#define IRQ_MIXER S5P_IRQ_VIC2(11)
-#define IRQ_HDMI S5P_IRQ_VIC2(12)
-#define IRQ_IIC1 S5P_IRQ_VIC2(13)
-#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 S5P_IRQ_VIC2(17)
-#define IRQ_I2S2 S5P_IRQ_VIC2(18)
-#define IRQ_AC97 S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF S5P_IRQ_VIC2(22)
-#define IRQ_ADC S5P_IRQ_VIC2(23)
-#define IRQ_PENDN S5P_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
-#define IRQ_CG S5P_IRQ_VIC2(26)
-#define IRQ_SEC S5P_IRQ_VIC2(27)
-#define IRQ_SECRX S5P_IRQ_VIC2(28)
-#define IRQ_SECTX S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
-#define IRQ_VIC_END S5P_IRQ_VIC2(31)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR 21
-
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO IRQ_LCD0
-#define IRQ_LCD_VSYNC IRQ_LCD1
-#define IRQ_LCD_SYSTEM IRQ_LCD2
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
deleted file mode 100644
index 2550b6112b82..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/map.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PC100_PA_SDRAM 0x20000000
-
-#define S5PC100_PA_ONENAND 0xE7100000
-#define S5PC100_PA_ONENAND_BUF 0xB0000000
-
-#define S5PC100_PA_CHIPID 0xE0000000
-
-#define S5PC100_PA_SYSCON 0xE0100000
-
-#define S5PC100_PA_OTHERS 0xE0200000
-
-#define S5PC100_PA_GPIO 0xE0300000
-
-#define S5PC100_PA_VIC0 0xE4000000
-#define S5PC100_PA_VIC1 0xE4100000
-#define S5PC100_PA_VIC2 0xE4200000
-
-#define S5PC100_PA_SROMC 0xE7000000
-
-#define S5PC100_PA_CFCON 0xE7800000
-
-#define S5PC100_PA_MDMA 0xE8100000
-#define S5PC100_PA_PDMA0 0xE9000000
-#define S5PC100_PA_PDMA1 0xE9200000
-
-#define S5PC100_PA_TIMER 0xEA000000
-#define S5PC100_PA_SYSTIMER 0xEA100000
-#define S5PC100_PA_WATCHDOG 0xEA200000
-#define S5PC100_PA_RTC 0xEA300000
-
-#define S5PC100_PA_UART 0xEC000000
-
-#define S5PC100_PA_IIC0 0xEC100000
-#define S5PC100_PA_IIC1 0xEC200000
-
-#define S5PC100_PA_SPI0 0xEC300000
-#define S5PC100_PA_SPI1 0xEC400000
-#define S5PC100_PA_SPI2 0xEC500000
-
-#define S5PC100_PA_USB_HSOTG 0xED200000
-#define S5PC100_PA_USB_HSPHY 0xED300000
-
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5PC100_PA_FB 0xEE000000
-
-#define S5PC100_PA_FIMC0 0xEE200000
-#define S5PC100_PA_FIMC1 0xEE300000
-#define S5PC100_PA_FIMC2 0xEE400000
-
-#define S5PC100_PA_I2S0 0xF2000000
-#define S5PC100_PA_I2S1 0xF2100000
-#define S5PC100_PA_I2S2 0xF2200000
-
-#define S5PC100_PA_AC97 0xF2300000
-
-#define S5PC100_PA_PCM0 0xF2400000
-#define S5PC100_PA_PCM1 0xF2500000
-
-#define S5PC100_PA_SPDIF 0xF2600000
-
-#define S5PC100_PA_TSADC 0xF3000000
-
-#define S5PC100_PA_KEYPAD 0xF3100000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#define S3C_PA_IIC S5PC100_PA_IIC0
-#define S3C_PA_IIC1 S5PC100_PA_IIC1
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_ONENAND S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
-#define S3C_PA_RTC S5PC100_PA_RTC
-#define S3C_PA_TSADC S5PC100_PA_TSADC
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S3C_PA_SPI0 S5PC100_PA_SPI0
-#define S3C_PA_SPI1 S5PC100_PA_SPI1
-#define S3C_PA_SPI2 S5PC100_PA_SPI2
-
-#define S5P_PA_CHIPID S5PC100_PA_CHIPID
-#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
-#define S5P_PA_SDRAM S5PC100_PA_SDRAM
-#define S5P_PA_SROMC S5PC100_PA_SROMC
-#define S5P_PA_SYSCON S5PC100_PA_SYSCON
-#define S5P_PA_TIMER S5PC100_PA_TIMER
-
-#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
-#define SAMSUNG_PA_TIMER S5PC100_PA_TIMER
-
-#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
-
-#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
-
-/* UART */
-
-#define S3C_PA_UART S5PC100_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
deleted file mode 100644
index bc92da2e0ba2..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PC100 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
-
-#define S5P_APLL_LOCK S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
-#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
-
-#define S5P_APLL_CON S5P_CLKREG(0x100)
-#define S5P_MPLL_CON S5P_CLKREG(0x104)
-#define S5P_EPLL_CON S5P_CLKREG(0x108)
-#define S5P_HPLL_CON S5P_CLKREG(0x10C)
-
-#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
-
-#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
-
-#define S5P_CLK_OUT S5P_CLKREG(0x400)
-
-#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
-#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
-#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
-
-#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
-#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
-#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
-#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
-#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
-#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
-
-#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
-
-#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
-#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_D0_MASK (0x7<<8)
-#define S5P_CLKDIV0_D0_SHIFT (8)
-#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
-
-/* CLKDIV1 */
-#define S5P_CLKDIV1_D1_MASK (0x7<<12)
-#define S5P_CLKDIV1_D1_SHIFT (12)
-#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
-
-#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
-#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
deleted file mode 100644
index 0bf73209ec7b..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO register definitions
- */
-
-#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
-#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
-
-#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4))
-
-#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x) S5PC100_GPH0(x)
-#define EINT_GPIO_1(x) S5PC100_GPH1(x)
-#define EINT_GPIO_2(x) S5PC100_GPH2(x)
-#define EINT_GPIO_3(x) S5PC100_GPH3(x)
-
-#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
-
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
deleted file mode 100644
index 761627897f30..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
deleted file mode 100644
index 668af3ac31f3..000000000000
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Author: Byungho Min <bhmin@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/gpio-cfg.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/adc.h>
-#include <plat/keypad.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/asoc-s3c.h>
-#include <plat/backlight.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_RXTRIG8 | \
- S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c_devs0[] __initdata = {
- {I2C_BOARD_INFO("wm8580", 0x1b),},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c_devs1[] __initdata = {
-};
-
-/* LCD power controller */
-static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- /* module reset */
- gpio_direction_output(S5PC100_GPH0(6), 1);
- mdelay(100);
- gpio_direction_output(S5PC100_GPH0(6), 0);
- mdelay(10);
- gpio_direction_output(S5PC100_GPH0(6), 1);
- mdelay(10);
- }
-}
-
-static struct plat_lcd_data smdkc100_lcd_power_data = {
- .set_power = smdkc100_lcd_power_set,
-};
-
-static struct platform_device smdkc100_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdkc100_lcd_power_data,
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdkc100_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdkc100_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- .refresh = 80,
-};
-
-static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
- .win[0] = &smdkc100_fb_win0,
- .vtiming = &smdkc100_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
-};
-
-static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
- .setup_gpio = s5pc100_ide_setup_gpio,
-};
-
-static uint32_t smdkc100_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
- .keymap = smdkc100_keymap,
- .keymap_size = ARRAY_SIZE(smdkc100_keymap),
-};
-
-static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
- .keymap_data = &smdkc100_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct platform_device *smdkc100_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_cfcon,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_fb,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &smdkc100_lcd_powerdev,
- &s5pc100_device_iis0,
- &samsung_device_keypad,
- &s5pc100_device_ac97,
- &s3c_device_rtc,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5pc100_device_spdif,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
- .no = S5PC100_GPD(0),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc100_bl_data = {
- .pwm_id = 0,
- .enable_gpio = -1,
-};
-
-static void __init smdkc100_map_io(void)
-{
- s5pc100_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdkc100_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- /* I2C */
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- s3c_fb_set_platdata(&smdkc100_lcd_pdata);
- s3c_ide_set_platdata(&smdkc100_ide_pdata);
-
- samsung_keypad_set_platdata(&smdkc100_keypad_data);
-
- s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
-
- /* LCD init */
- gpio_request(S5PC100_GPH0(6), "GPH0");
- smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
-
- platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
-
- samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-}
-
-MACHINE_START(SMDKC100, "SMDKC100")
- /* Maintainer: Byungho Min <bhmin@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pc100_init_irq,
- .map_io = smdkc100_map_io,
- .init_machine = smdkc100_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pc100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
deleted file mode 100644
index 8978e4cf9ed5..000000000000
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC100 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#define DISR_OFFSET 0x7008
-
-static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-}
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
- s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
-}
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
deleted file mode 100644
index 89a6a769d622..000000000000
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
deleted file mode 100644
index faa667ef02cb..000000000000
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c
deleted file mode 100644
index 223aae044466..000000000000
--- a/arch/arm/mach-s5pc100/setup-ide.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PC100 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
- for (; nr > 0; nr--, base++)
- s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pc100_ide_setup_gpio(void)
-{
- u32 reg;
-
- /* Independent CF interface, CF chip select configuration */
- reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
- writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
-
- /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
-
- /*CF_Data[0 - 7] */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
-
- /* CF_Data[8 - 15] */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
-
- /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
-
- /* EBI_OE, EBI_WE */
- s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
-
- /* CF_OE, CF_WE */
- s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
-
- /* CF_CD */
- s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
-}
diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c
deleted file mode 100644
index ada377f0c206..000000000000
--- a/arch/arm/mach-s5pc100/setup-keypad.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-keypad.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * GPIO configuration for S5PC100 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
-
- /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
deleted file mode 100644
index 6010c0310cb5..000000000000
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int num;
-
- num = width;
- /* In case of 8 width, we should decrease the 2 */
- if (width == 8)
- num = width - 2;
-
- /* Set all the necessary GPG0/GPG1 pins to special-function 0 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
-
- if (width == 8)
- s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG2 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG3 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
- }
-}
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
deleted file mode 100644
index 183567961de1..000000000000
--- a/arch/arm/mach-s5pc100/setup-spi.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-int s3c64xx_spi2_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 798073057e51..4508643cca32 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -12,6 +12,7 @@ menuconfig ARCH_SHMOBILE_MULTI
select NO_IOPORT_MAP
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_OPP
if ARCH_SHMOBILE_MULTI
@@ -25,6 +26,11 @@ config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select SYS_SUPPORTS_SH_MTU2
+config ARCH_R8A7779
+ bool "R-Car H1 (R8A77790)"
+ select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
+
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select RENESAS_IRQC
@@ -51,6 +57,11 @@ config MACH_LAGER
depends on ARCH_R8A7790
select MICREL_PHY if SH_ETH
+config MACH_MARZEN
+ bool "MARZEN board"
+ depends on ARCH_R8A7779
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
comment "Renesas ARM SoCs System Configuration"
endif
@@ -234,19 +245,6 @@ config MACH_MARZEN
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
-config MACH_MARZEN_REFERENCE
- bool "MARZEN board - Reference Device Tree Implementation"
- depends on ARCH_R8A7779
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
- ---help---
- Use reference implementation of Marzen board support
- which makes use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 38d5fe825e93..fe3878a1a69a 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -34,31 +34,39 @@ obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
+# CPU reset vector handling objects
+cpu-y := platsmp.o headsmp.o
+cpu-$(CONFIG_ARCH_R8A7790) += platsmp-apmu.o
+cpu-$(CONFIG_ARCH_R8A7791) += platsmp-apmu.o
+
# SMP objects
-smp-y := platsmp.o headsmp.o
+smp-y := $(cpu-y)
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o
-smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o
-smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o
+smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
-# IRQ objects
-obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
-
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o
obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o
obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o
-obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o
+obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o $(cpu-y)
+obj-$(CONFIG_ARCH_R8A7791) += pm-r8a7791.o pm-rcar.o $(cpu-y)
+
+# IRQ objects
+obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
+obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
@@ -67,7 +75,6 @@ obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_GENMAI) += board-genmai.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
-obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 918fccffa1b6..ebf97d4bcfd8 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -13,7 +13,6 @@ loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
-loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
__ZRELADDR := $(sort $(loadaddr-y))
zreladdr-y += $(__ZRELADDR)
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index 3276afcf3cc9..2f7723e5fe91 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -24,11 +24,13 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/sh_clk.h>
-#include <mach/common.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "r8a73a4.h"
+
static void __init ape6evm_add_standard_devices(void)
{
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index fe071a9130b7..485567876d39 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -33,12 +33,14 @@
#include <linux/regulator/machine.h>
#include <linux/sh_clk.h>
#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a73a4.h"
+
/* LEDS */
static struct gpio_led ape6evm_leds[] = {
{
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index f660fbb96e0b..208576667b22 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,11 +24,13 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
+
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "r8a7740.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 30fcac73a540..32339cf6ee7b 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -45,9 +45,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/i2c-gpio.h>
#include <linux/reboot.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7740.h>
+
#include <media/mt9t112.h>
#include <media/sh_mobile_ceu.h>
#include <media/soc_camera.h>
@@ -62,6 +60,10 @@
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
#include "sh-gpio.h"
/*
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 027373f8de82..ba840cd333b9 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -19,10 +19,12 @@
*/
#include <linux/of_platform.h>
-#include <mach/common.h>
-#include <mach/r8a7778.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "r8a7778.h"
+
/*
* see board-bock.c for checking detail of dip-switch
*/
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index f444be2f241e..b4e4789017bc 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -34,14 +34,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb/renesas_usbhs.h>
+
#include <media/soc_camera.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7778.h"
+
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
index 2ff6ad6e608e..e5448f7b868a 100644
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ b/arch/arm/mach-shmobile/board-genmai-reference.c
@@ -20,12 +20,14 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "r7s72100.h"
+
/*
* This is a really crude hack to provide clkdev support to platform
* devices until they get moved to DT.
@@ -47,7 +49,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index c94201ee8596..e2a3ba4871c3 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -25,12 +25,14 @@
#include <linux/sh_eth.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r7s72100.h"
+
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x00, /* PD60610 */
@@ -154,7 +156,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index d322a162b4b0..0b1fb2345aa1 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -23,13 +23,15 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/rcar-gen2.h>
-#include <mach/r8a7791.h>
+
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index c6c68892caa3..e698b90ae761 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -45,13 +45,15 @@
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index a735a1d80c28..5d2621f202d1 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -25,12 +25,14 @@
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
+
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "sh73a0.h"
+
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f94ec8ca42c1..1320e9d063b1 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -41,16 +41,18 @@
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
+
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>
+#include "common.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
/*
* external GPIO
*/
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 749832e3f33c..8dcff51a8f45 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -22,13 +22,15 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/rcar-gen2.h>
-#include <mach/r8a7790.h>
+
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
{
@@ -129,7 +131,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index f8b1e05463cc..bfd9e4846fc9 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -31,6 +31,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
@@ -43,22 +45,23 @@
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
#include <linux/usb/phy.h>
#include <linux/usb/renesas_usbhs.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7790.h>
+
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/*
* SSI-AK4643
*
@@ -886,7 +889,7 @@ static const char * const lager_boards_compat_dt[] __initconst = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0ff4d8e45cf7..304b76f3bf4a 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -47,10 +47,11 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
+#include <linux/sh_clk.h>
#include <linux/tca6416_keypad.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
+
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
@@ -58,15 +59,14 @@
#include <media/soc_camera_platform.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
#include "sh-gpio.h"
+#include "sh7372.h"
/*
* Address Interface BusWidth note
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 2773936bf7dc..21b3e1ca2261 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,19 +19,42 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
+#include <linux/clk/shmobile.h>
+#include <linux/clocksource.h>
+#include <linux/of_platform.h>
+
#include <asm/irq.h>
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7779.h"
+
+static void __init marzen_init_timer(void)
+{
+ r8a7779_clocks_init(r8a7779_read_mode_pins());
+ clocksource_of_init();
+}
+
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] __initconst = {
+ { "tmu0", "fck", "sh-tmu.0" },
+};
+
static void __init marzen_init(void)
{
+ shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
r8a7779_add_standard_devices_dt();
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
}
static const char *marzen_boards_compat_dt[] __initdata = {
+ "renesas,marzen",
"renesas,marzen-reference",
NULL,
};
@@ -39,7 +62,8 @@ static const char *marzen_boards_compat_dt[] __initdata = {
DT_MACHINE_START(MARZEN, "marzen")
.smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
- .init_early = r8a7779_init_delay,
+ .init_early = shmobile_init_delay,
+ .init_time = marzen_init_timer,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = marzen_init,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index d832a4477b4b..25a1037e289d 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -41,14 +41,16 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
+
#include <media/soc_camera.h>
-#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/traps.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7779.h"
+
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index df187484de5d..3eb2ec401e0c 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -19,8 +19,9 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/common.h>
-#include <mach/r7s72100.h>
+
+#include "common.h"
+#include "r7s72100.h"
/* Frequency Control Registers */
#define FRQCR 0xfcfe0010
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index b5bc22c6a858..49d139748aa6 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -22,8 +22,8 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "common.h"
+#include "clock.h"
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x270
@@ -574,11 +574,17 @@ static struct clk_lookup lookups[] = {
/* MSTP */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c20000.serial", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("e6ce0000.serial", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+ CLKDEV_DEV_ID("e6cf0000.serial", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 50931e3c97c7..a60c324df64e 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -22,9 +22,10 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7740.h"
/*
* | MDx | XTAL1/EXTAL1 | System | EXTALR |
@@ -555,27 +556,27 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
- CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]),
+ CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
- CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]),
+ CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
- CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]),
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
- CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
- CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]),
+ CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]),
CLKDEV_DEV_ID("fe1f0000.sound", &mstp_clks[MSTP328]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 13f8f3ab8840..95579073cfce 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -39,8 +39,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
@@ -202,11 +202,17 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
+ CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
+ CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
+ CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
+ CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
+ CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+ CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index a13298bd37a8..c51f9db3f66f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -23,8 +23,11 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include <linux/sh_timer.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7779.h"
/*
* MD1 = 1 MD1 = 0
@@ -52,9 +55,6 @@
#define MSTPCR3 IOMEM(0xffc8003c)
#define MSTPSR1 IOMEM(0xffc80044)
-#define MODEMR 0xffcc0020
-
-
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
@@ -207,14 +207,9 @@ static struct clk_lookup lookups[] = {
void __init r8a7779_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = r8a7779_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
if (mode & MD(1)) {
plla_clk.rate = 1500000000;
@@ -268,3 +263,13 @@ void __init r8a7779_clock_init(void)
else
panic("failed to setup r8a7779 clocks\n");
}
+
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak r8a7779_register_twd(void) { }
+
+void __init r8a7779_earlytimer_init(void)
+{
+ r8a7779_clock_init();
+ r8a7779_register_twd();
+ shmobile_earlytimer_init();
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 296a057109e4..17435c1aa2fe 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -22,9 +22,11 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r8a7790.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
/*
* MD EXTAL PLL0 PLL1 PLL3
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index e2fdfcc14436..10e193d707f5 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -23,9 +23,9 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
+#include "clock.h"
+#include "common.h"
+#include "rcar-gen2.h"
/*
* MD EXTAL PLL0 PLL1 PLL3
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index d16d9ca7f79e..7071676145c4 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -21,8 +21,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
/* SH7372 registers */
#define FRQCRA IOMEM(0xe6150000)
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 0d9cd1fe0212..9433a4e2c88e 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -22,8 +22,8 @@
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <asm/processor.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
#define FRQCRA IOMEM(0xe6150000)
#define FRQCRB IOMEM(0xe6150004)
@@ -638,16 +638,25 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), /* SCIFA1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+ CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+ CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+ CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index e7232a0373b9..806f94038cc4 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -25,7 +25,7 @@
#ifdef CONFIG_COMMON_CLK
#include <linux/clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
+#include "clock.h"
void __init shmobile_clk_workaround(const struct clk_name *clks,
int nr_clks, bool enable)
@@ -49,8 +49,8 @@ void __init shmobile_clk_workaround(const struct clk_name *clks,
#else /* CONFIG_COMMON_CLK */
#include <linux/sh_clk.h>
#include <linux/export.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
{
diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/clock.h
index 31b6417463e6..31b6417463e6 100644
--- a/arch/arm/mach-shmobile/include/mach/clock.h
+++ b/arch/arm/mach-shmobile/clock.h
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/common.h
index f7a360edcc35..98056081f0da 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -35,8 +35,10 @@ extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
#ifdef CONFIG_SUSPEND
int shmobile_suspend_init(void);
+void shmobile_smp_apmu_suspend_init(void);
#else
static inline int shmobile_suspend_init(void) { return 0; }
+static inline void shmobile_smp_apmu_suspend_init(void) { }
#endif
#ifdef CONFIG_CPU_IDLE
@@ -45,12 +47,19 @@ int shmobile_cpuidle_init(void);
static inline int shmobile_cpuidle_init(void) { return 0; }
#endif
+#ifdef CONFIG_CPU_FREQ
+int shmobile_cpufreq_init(void);
+#else
+static inline int shmobile_cpufreq_init(void) { return 0; }
+#endif
+
extern void __iomem *shmobile_scu_base;
static inline void __init shmobile_init_late(void)
{
shmobile_suspend_init();
shmobile_cpuidle_init();
+ shmobile_cpufreq_init();
}
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
index 9411a5bf4fd6..f2e79f2376e1 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/console.c
@@ -19,8 +19,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/common.h>
#include <asm/mach/map.h>
+#include "common.h"
void __init shmobile_setup_console(void)
{
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c
new file mode 100644
index 000000000000..8a24b2be46ae
--- /dev/null
+++ b/arch/arm/mach-shmobile/cpufreq.c
@@ -0,0 +1,17 @@
+/*
+ * CPUFreq support code for SH-Mobile ARM
+ *
+ * Copyright (C) 2014 Gaku Inami
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+
+int __init shmobile_cpufreq_init(void)
+{
+ platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
+ return 0;
+}
diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
index 97c40bd9b94f..97c40bd9b94f 100644
--- a/arch/arm/mach-shmobile/include/mach/dma-register.h
+++ b/arch/arm/mach-shmobile/dma-register.h
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index e5be5c88644b..faf82144a262 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -10,14 +10,17 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>
#include <asm/memory.h>
+#ifdef CONFIG_SMP
ENTRY(shmobile_invalidate_start)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(shmobile_invalidate_start)
+#endif
/*
* Reset vector for secondary CPUs.
@@ -68,7 +71,7 @@ shmobile_smp_boot_find_mpidr:
shmobile_smp_boot_next:
add r1, r1, #1
- cmp r1, #CONFIG_NR_CPUS
+ cmp r1, #NR_CPUS
blo shmobile_smp_boot_find_mpidr
b shmobile_smp_sleep
@@ -85,10 +88,10 @@ ENDPROC(shmobile_smp_sleep)
.globl shmobile_smp_mpidr
shmobile_smp_mpidr:
-1: .space CONFIG_NR_CPUS * 4
+1: .space NR_CPUS * 4
.globl shmobile_smp_fn
shmobile_smp_fn:
-2: .space CONFIG_NR_CPUS * 4
+2: .space NR_CPUS * 4
.globl shmobile_smp_arg
shmobile_smp_arg:
-3: .space CONFIG_NR_CPUS * 4
+3: .space NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index d241bfd6926d..5aee83f079e2 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -1,24 +1,10 @@
#ifndef __ASM_MACH_IRQS_H
#define __ASM_MACH_IRQS_H
-#include <linux/sh_intc.h>
-
-/* GIC */
-#define gic_spi(nr) ((nr) + 32)
-#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
-
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
/* External IRQ pins */
#define IRQPIN_BASE 2000
#define irq_pin(nr) ((nr) + IRQPIN_BASE)
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE 2500
-#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y)
-
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index a91caad7db7c..e2af00b1bd9d 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -22,11 +22,10 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "intc.h"
+#include "irqs.h"
enum {
UNUSED_INTCA = 0,
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 19a26f4579b3..44457a94897b 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -22,15 +22,16 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sh_intc.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "intc.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
enum {
UNUSED = 0,
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/intc.h
index a5603c76cfe0..a5603c76cfe0 100644
--- a/arch/arm/mach-shmobile/include/mach/intc.h
+++ b/arch/arm/mach-shmobile/intc.h
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
new file mode 100644
index 000000000000..4ff2d2aa94f0
--- /dev/null
+++ b/arch/arm/mach-shmobile/irqs.h
@@ -0,0 +1,21 @@
+#ifndef __SHMOBILE_IRQS_H
+#define __SHMOBILE_IRQS_H
+
+#include <linux/sh_intc.h>
+#include <mach/irqs.h>
+
+/* GIC */
+#define gic_spi(nr) ((nr) + 32)
+#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
+
+/* INTCS */
+#define INTCS_VECT_BASE 0x3400
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
+/* GPIO IRQ */
+#define _GPIO_IRQ_BASE 2500
+#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
+#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y)
+
+#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 8cb641c00fdb..2c06810d3a70 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -7,27 +7,32 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/smp.h>
+#include <linux/suspend.h>
+#include <linux/threads.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/proc-fns.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
+#include <asm/suspend.h>
+#include "common.h"
static struct {
void __iomem *iomem;
int bit;
-} apmu_cpus[CONFIG_NR_CPUS];
+} apmu_cpus[NR_CPUS];
#define WUPCR_OFFS 0x10
#define PSTR_OFFS 0x40
#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
-static int apmu_power_on(void __iomem *p, int bit)
+static int __maybe_unused apmu_power_on(void __iomem *p, int bit)
{
/* request power on */
writel_relaxed(BIT(bit), p + WUPCR_OFFS);
@@ -46,7 +51,7 @@ static int apmu_power_off(void __iomem *p, int bit)
return 0;
}
-static int apmu_power_off_poll(void __iomem *p, int bit)
+static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit)
{
int k;
@@ -69,7 +74,7 @@ static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
static void apmu_init_cpu(struct resource *res, int cpu, int bit)
{
- if (apmu_cpus[cpu].iomem)
+ if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
return;
apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
@@ -133,6 +138,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
apmu_parse_cfg(apmu_init_cpu);
}
+#ifdef CONFIG_SMP
int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
/* For this particular CPU register boot vector */
@@ -140,8 +146,9 @@ int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
return apmu_wrap(cpu, apmu_power_on);
}
+#endif
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND)
/* nicked from arch/arm/mach-exynos/hotplug.c */
static inline void cpu_enter_lowpower_a15(void)
{
@@ -172,16 +179,40 @@ static inline void cpu_enter_lowpower_a15(void)
dsb();
}
-void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
{
- /* For this particular CPU deregister boot vector */
- shmobile_smp_hook(cpu, 0, 0);
/* Select next sleep mode using the APMU */
apmu_wrap(cpu, apmu_power_off);
/* Do ARM specific CPU shutdown */
cpu_enter_lowpower_a15();
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+#endif
+
+#if defined(CONFIG_HOTPLUG_CPU)
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+ /* For this particular CPU deregister boot vector */
+ shmobile_smp_hook(cpu, 0, 0);
+
+ /* Shutdown CPU core */
+ shmobile_smp_apmu_cpu_shutdown(cpu);
/* jump to shared mach-shmobile sleep / reset code */
shmobile_smp_sleep();
@@ -192,3 +223,25 @@ int shmobile_smp_apmu_cpu_kill(unsigned int cpu)
return apmu_wrap(cpu, apmu_power_off_poll);
}
#endif
+
+#if defined(CONFIG_SUSPEND)
+static int shmobile_smp_apmu_do_suspend(unsigned long cpu)
+{
+ shmobile_smp_hook(cpu, virt_to_phys(cpu_resume), 0);
+ shmobile_smp_apmu_cpu_shutdown(cpu);
+ cpu_do_idle(); /* WFI selects Core Standby */
+ return 1;
+}
+
+static int shmobile_smp_apmu_enter_suspend(suspend_state_t state)
+{
+ cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend);
+ cpu_leave_lowpower();
+ return 0;
+}
+
+void __init shmobile_smp_apmu_suspend_init(void)
+{
+ shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend;
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index 673ad6e80869..64663110ab6c 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -15,7 +15,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include <mach/common.h>
+#include "common.h"
static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
unsigned long action, void *hcpu)
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 9ebc246b8d7d..3923e09e966d 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
+#include "common.h"
extern unsigned long shmobile_smp_fn[];
extern unsigned long shmobile_smp_arg[];
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index 40b87aa1d448..a0d44d537fa0 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -10,8 +10,8 @@
*/
#include <linux/console.h>
#include <linux/suspend.h>
-#include <mach/pm-rmobile.h>
-#include <mach/common.h>
+#include "common.h"
+#include "pm-rmobile.h"
#ifdef CONFIG_PM
static int r8a7740_pd_a4s_suspend(void)
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index d6fe189b2df6..69f70b7f7fb2 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -13,20 +13,33 @@
#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/console.h>
+
#include <asm/io.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7779.h>
+
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7779.h"
/* SYSC */
#define SYSCIER 0x0c
#define SYSCIMR 0x10
+struct r8a7779_pm_domain {
+ struct generic_pm_domain genpd;
+ struct rcar_sysc_ch ch;
+};
+
+static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
+{
+ return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
+}
+
#if defined(CONFIG_PM) || defined(CONFIG_SMP)
static void __init r8a7779_sysc_init(void)
diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c
index fc82839e2c2a..80e8d95e54d3 100644
--- a/arch/arm/mach-shmobile/pm-r8a7790.c
+++ b/arch/arm/mach-shmobile/pm-r8a7790.c
@@ -11,9 +11,21 @@
*/
#include <linux/kernel.h>
+#include <linux/smp.h>
#include <asm/io.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7790.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7790.h"
+
+/* RST */
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA7BAR 0x0030
+#define CA15RESCNT 0x0040
+#define CA7RESCNT 0x0044
+
+/* On-chip RAM */
+#define MERAM 0xe8080000
/* SYSC */
#define SYSCIER 0x0c
@@ -38,8 +50,33 @@ static inline void r8a7790_sysc_init(void) {}
void __init r8a7790_pm_init(void)
{
+ void __iomem *p;
+ u32 bar;
static int once;
- if (!once++)
- r8a7790_sysc_init();
+ if (once++)
+ return;
+
+ /* MERAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(MERAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (MERAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar, p + CA7BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA7BAR);
+
+ /* de-assert reset for all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+ p + CA7RESCNT);
+ iounmap(p);
+
+ r8a7790_sysc_init();
+ shmobile_smp_apmu_suspend_init();
}
diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c
new file mode 100644
index 000000000000..25f107bb3657
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-r8a7791.c
@@ -0,0 +1,73 @@
+/*
+ * r8a7791 Power management support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <asm/io.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7791.h"
+
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA15RESCNT 0x0040
+#define RAM 0xe6300000
+
+/* SYSC */
+#define SYSCIER 0x0c
+#define SYSCIMR 0x10
+
+#if defined(CONFIG_SMP)
+
+static void __init r8a7791_sysc_init(void)
+{
+ void __iomem *base = rcar_sysc_init(0xe6180000);
+
+ /* enable all interrupt sources, but do not use interrupt handler */
+ iowrite32(0x0131000e, base + SYSCIER);
+ iowrite32(0, base + SYSCIMR);
+}
+
+#else /* CONFIG_SMP */
+
+static inline void r8a7791_sysc_init(void) {}
+
+#endif /* CONFIG_SMP */
+
+void __init r8a7791_pm_init(void)
+{
+ void __iomem *p;
+ u32 bar;
+ static int once;
+
+ if (once++)
+ return;
+
+ /* RAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(RAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (RAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+
+ /* enable clocks to all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ iounmap(p);
+
+ r8a7791_sysc_init();
+ shmobile_smp_apmu_suspend_init();
+}
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c
index 1f465a12d1b1..34b8a5674f85 100644
--- a/arch/arm/mach-shmobile/pm-rcar.c
+++ b/arch/arm/mach-shmobile/pm-rcar.c
@@ -13,7 +13,7 @@
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <asm/io.h>
-#include <mach/pm-rcar.h>
+#include "pm-rcar.h"
/* SYSC */
#define SYSCSR 0x00
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rcar.h b/arch/arm/mach-shmobile/pm-rcar.h
index ef3a1ef628f1..ef3a1ef628f1 100644
--- a/arch/arm/mach-shmobile/include/mach/pm-rcar.h
+++ b/arch/arm/mach-shmobile/pm-rcar.h
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index f710235aff2f..ebdd16e94a84 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -17,7 +17,7 @@
#include <linux/pm.h>
#include <linux/pm_clock.h>
#include <asm/io.h>
-#include <mach/pm-rmobile.h>
+#include "pm-rmobile.h"
/* SYSC */
#define SPDCR IOMEM(0xe6180008)
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 690553a06887..690553a06887 100644
--- a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 0de75fd394b9..7e5c2676c489 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -21,13 +21,15 @@
#include <linux/irq.h>
#include <linux/bitrev.h>
#include <linux/console.h>
+
#include <asm/cpuidle.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/suspend.h>
-#include <mach/common.h>
-#include <mach/sh7372.h>
-#include <mach/pm-rmobile.h>
+
+#include "common.h"
+#include "pm-rmobile.h"
+#include "sh7372.h"
/* DBG */
#define DBGREG1 IOMEM(0xe6100020)
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
index 99086e98fbbc..a7e466817965 100644
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -9,7 +9,7 @@
*/
#include <linux/suspend.h>
-#include <mach/common.h>
+#include "common.h"
#ifdef CONFIG_SUSPEND
static int sh73a0_enter_suspend(suspend_state_t suspend_state)
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h
index 5f34b20ecd4a..efb723c88dd0 100644
--- a/arch/arm/mach-shmobile/include/mach/r7s72100.h
+++ b/arch/arm/mach-shmobile/r7s72100.h
@@ -3,6 +3,5 @@
void r7s72100_add_dt_devices(void);
void r7s72100_clock_init(void);
-void r7s72100_init_early(void);
#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h
index ce8bdd1d8a8a..ce8bdd1d8a8a 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/r8a73a4.h
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index 5e3c9ec06303..1d1a5fd78b6b 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -19,8 +19,6 @@
#ifndef __ASM_R8A7740_H__
#define __ASM_R8A7740_H__
-#include <mach/pm-rmobile.h>
-
/*
* MD_CKx pin
*/
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f4076a50e970..f4076a50e970 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
index 88eeceaf1088..5415c719dc19 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -2,8 +2,6 @@
#define __ASM_R8A7779_H__
#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-#include <mach/pm-rcar.h>
/* HPB-DMA slave IDs */
enum {
@@ -12,17 +10,6 @@ enum {
HPBDMA_SLAVE_SDHI0_RX,
};
-struct r8a7779_pm_domain {
- struct generic_pm_domain genpd;
- struct rcar_sysc_ch ch;
-};
-
-static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
- return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
-extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq_extpin(int irlm);
extern void r8a7779_init_irq_extpin_dt(int irlm);
extern void r8a7779_init_irq_dt(void);
@@ -32,6 +19,7 @@ extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_init_late(void);
+extern u32 r8a7779_read_mode_pins(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
index 0b95babe84ba..459827f1369b 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -1,8 +1,6 @@
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
-#include <mach/rcar-gen2.h>
-
/* DMA slave IDs */
enum {
RCAR_DMA_SLAVE_INVALID,
@@ -33,7 +31,6 @@ void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_pm_init(void);
-void r8a7790_init_early(void);
extern struct smp_operations r8a7790_smp_ops;
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h
index 664274cc4b64..86eae7bceb6f 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -5,6 +5,7 @@ void r8a7791_add_standard_devices(void);
void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_pinmux_init(void);
+void r8a7791_pm_init(void);
extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h
index 43f606eb2d82..ce53cb5f53a1 100644
--- a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
+++ b/arch/arm/mach-shmobile/rcar-gen2.h
@@ -4,5 +4,6 @@
void rcar_gen2_timer_init(void);
#define MD(nr) BIT(nr)
u32 rcar_gen2_read_mode_pins(void);
+void rcar_gen2_reserve(void);
#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index d953ff6e78a2..b06a9e8f59a5 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,14 +16,13 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <mach/common.h>
+#include <linux/mm.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "common.h"
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
@@ -42,17 +41,6 @@ static void __init emev2_map_io(void)
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-static void __init emev2_init_delay(void)
-{
- shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
-}
-
-static void __init emev2_add_standard_devices_dt(void)
-{
- of_clk_init(NULL);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char *emev2_boards_compat_dt[] __initconst = {
"renesas,emev2",
NULL,
@@ -63,8 +51,7 @@ extern struct smp_operations emev2_smp_ops;
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
- .init_early = emev2_init_delay,
- .init_machine = emev2_add_standard_devices_dt,
+ .init_early = shmobile_init_delay,
.init_late = shmobile_init_late,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 412e179429cd..4a98b232d316 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -22,11 +22,13 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r7s72100.h"
+
static struct resource mtu2_resources[] __initdata = {
DEFINE_RES_MEM(0xfcff0000, 0x400),
DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
@@ -43,11 +45,6 @@ void __init r7s72100_add_dt_devices(void)
r7s72100_register_mtu2();
}
-void __init r7s72100_init_early(void)
-{
- shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
-}
-
#ifdef CONFIG_USE_OF
static const char *r7s72100_boards_compat_dt[] __initdata = {
"renesas,r7s72100",
@@ -55,7 +52,7 @@ static const char *r7s72100_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.dt_compat = r7s72100_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 9333770cfac2..f470b3cc0b7b 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -24,12 +24,14 @@
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "r8a73a4.h"
+
static const struct resource pfc_resources[] = {
DEFINE_RES_MEM(0xe6050000, 0x9000),
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 35dec233301e..348af358a239 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -31,16 +31,18 @@
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
-#include <mach/r8a7740.h>
-#include <mach/pm-rmobile.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
+
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
+
static struct map_desc r8a7740_io_desc[] __initdata = {
/*
* for CPGA/INTC/PFC
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index d311ef903b39..2ccc0128b469 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -37,12 +37,14 @@
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/r8a7778.h>
-#include <mach/common.h>
+
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7778.h"
+
/* SCIF */
#define R8A7778_SCIF(index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index aba4ed652d54..8dbc407f4c8d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -40,15 +40,17 @@
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/pm_runtime.h>
-#include <mach/irqs.h>
-#include <mach/r8a7779.h>
-#include <mach/common.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7779.h"
+
static struct map_desc r8a7779_io_desc[] __initdata = {
/* 2M entity map for 0xf0000000 (MPCORE) */
{
@@ -640,16 +642,16 @@ static void __init r8a7779_register_hpb_dmae(void)
}
static struct platform_device *r8a7779_devices_dt[] __initdata = {
+ &tmu0_device,
+};
+
+static struct platform_device *r8a7779_standard_devices[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
&scif3_device,
&scif4_device,
&scif5_device,
- &tmu0_device,
-};
-
-static struct platform_device *r8a7779_standard_devices[] __initdata = {
&i2c0_device,
&i2c1_device,
&i2c2_device,
@@ -674,16 +676,6 @@ void __init r8a7779_add_standard_devices(void)
r8a7779_register_hpb_dmae();
}
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak r8a7779_register_twd(void) { }
-
-void __init r8a7779_earlytimer_init(void)
-{
- r8a7779_clock_init();
- r8a7779_register_twd();
- shmobile_earlytimer_init();
-}
-
void __init r8a7779_add_early_devices(void)
{
early_platform_add_devices(r8a7779_devices_dt,
@@ -747,19 +739,28 @@ void __init r8a7779_init_irq_dt(void)
__raw_writel(0x003fee3f, INT2SMSKCR4);
}
-void __init r8a7779_init_delay(void)
+void __init r8a7779_add_standard_devices_dt(void)
{
- shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
+ platform_add_devices(r8a7779_devices_dt,
+ ARRAY_SIZE(r8a7779_devices_dt));
}
-void __init r8a7779_add_standard_devices_dt(void)
+#define MODEMR 0xffcc0020
+
+u32 __init r8a7779_read_mode_pins(void)
{
- /* clocks are setup late during boot in the case of DT */
- r8a7779_clock_init();
+ static u32 mode;
+ static bool mode_valid;
+
+ if (!mode_valid) {
+ void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+ mode_valid = true;
+ }
- platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ return mode;
}
static const char *r8a7779_compat_dt[] __initdata = {
@@ -769,7 +770,7 @@ static const char *r8a7779_compat_dt[] __initdata = {
DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
.map_io = r8a7779_map_io,
- .init_early = r8a7779_init_delay,
+ .init_early = shmobile_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = r8a7779_add_standard_devices_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 6bd08b127fa4..c37d82d38617 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -26,12 +26,15 @@
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/r8a7790.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/* Audio-DMAC */
#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \
{ \
@@ -307,13 +310,6 @@ void __init r8a7790_add_standard_devices(void)
r8a7790_register_audio_dmac(1);
}
-void __init r8a7790_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char * const r8a7790_boards_compat_dt[] __initconst = {
@@ -323,8 +319,10 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
+ .init_late = shmobile_init_late,
+ .reserve = rcar_gen2_reserve,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 04a96ddb3224..8823324ac5a9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -26,12 +26,14 @@
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
+
static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
};
@@ -217,6 +219,8 @@ DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
.smp = smp_ops(r8a7791_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
+ .init_late = shmobile_init_late,
+ .reserve = rcar_gen2_reserve,
.dt_compat = r8a7791_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 542c5a47173f..42d5b4308923 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -20,11 +20,14 @@
#include <linux/clk/shmobile.h>
#include <linux/clocksource.h>
+#include <linux/device.h>
+#include <linux/dma-contiguous.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
+#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "rcar-gen2.h"
#define MODEMR 0xe6160060
@@ -110,3 +113,72 @@ void __init rcar_gen2_timer_init(void)
#endif
clocksource_of_init();
}
+
+struct memory_reserve_config {
+ u64 reserved;
+ u64 base, size;
+};
+
+static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const __be32 *reg, *endp;
+ int l;
+ struct memory_reserve_config *mrc = data;
+ u64 lpae_start = 1ULL << 32;
+
+ /* We are scanning "memory" nodes only */
+ if (type == NULL || strcmp(type, "memory"))
+ return 0;
+
+ reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(__be32));
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+ size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+ if (base >= lpae_start)
+ continue;
+
+ if ((base + size) >= lpae_start)
+ size = lpae_start - base;
+
+ if (size < mrc->reserved)
+ continue;
+
+ if (base < mrc->base)
+ continue;
+
+ /* keep the area at top near the 32-bit legacy limit */
+ mrc->base = base + size - mrc->reserved;
+ mrc->size = mrc->reserved;
+ }
+
+ return 0;
+}
+
+struct cma *rcar_gen2_dma_contiguous;
+
+void __init rcar_gen2_reserve(void)
+{
+ struct memory_reserve_config mrc;
+
+ /* reserve 256 MiB at the top of the physical legacy 32-bit space */
+ memset(&mrc, 0, sizeof(mrc));
+ mrc.reserved = SZ_256M;
+
+ of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
+#ifdef CONFIG_DMA_CMA
+ if (mrc.size)
+ dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
+ &rcar_gen2_dma_contiguous, true);
+#endif
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2a8b9f2a2f54..9cdfcdfd38fc 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -29,20 +29,22 @@
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/pm_domain.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-#include <mach/common.h>
+
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "sh7372.h"
+
static struct map_desc sh7372_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index ad00724a2269..224882151667 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -29,19 +29,20 @@
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
+
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
static struct map_desc sh73a0_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/sh7372.h
index 854a9f0ca040..4ad960d5075b 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/sh7372.h
@@ -11,10 +11,6 @@
#ifndef __ASM_SH7372_H__
#define __ASM_SH7372_H__
-#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-#include <mach/pm-rmobile.h>
-
/* DMA slave IDs */
enum {
SHDMA_SLAVE_INVALID,
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
index 359b582dc270..359b582dc270 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/sh73a0.h
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 2dfd748da7f3..6ff1df1df9a7 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -23,9 +23,9 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
+#include "common.h"
#define EMEV2_SCU_BASE 0x1e000000
#define EMEV2_SMU_BASE 0xe0110000
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index e7a3201473d0..3100e355c3fd 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -23,14 +23,16 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7779.h>
+
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7779.h"
+
#define AVECR IOMEM(0xfe700040)
#define R8A7779_SCU_BASE 0xf0000000
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 591052799e8f..2311694636e1 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -17,17 +17,12 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
+
#include <asm/smp_plat.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7790.h>
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA7BAR 0x0030
-#define CA15RESCNT 0x0040
-#define CA7RESCNT 0x0044
-#define MERAM 0xe8080000
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7790.h"
static struct rcar_sysc_ch r8a7790_ca15_scu = {
.chan_offs = 0x180, /* PWRSR5 .. PWRER5 */
@@ -41,32 +36,9 @@ static struct rcar_sysc_ch r8a7790_ca7_scu = {
static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
{
- void __iomem *p;
- u32 bar;
-
/* let APMU code install data related to shmobile_boot_vector */
shmobile_smp_apmu_prepare_cpus(max_cpus);
- /* MERAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(MERAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (MERAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar, p + CA7BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA7BAR);
-
- /* enable clocks to all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
- p + CA7RESCNT);
- iounmap(p);
-
/* turn on power to SCU */
r8a7790_pm_init();
rcar_sysc_power_up(&r8a7790_ca15_scu);
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index ec979529f30f..f743386166fb 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -17,39 +17,19 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
+
#include <asm/smp_plat.h>
-#include <mach/common.h>
-#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA15RESCNT 0x0040
-#define RAM 0xe6300000
+#include "common.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
{
- void __iomem *p;
- u32 bar;
-
/* let APMU code install data related to shmobile_boot_vector */
shmobile_smp_apmu_prepare_cpus(max_cpus);
- /* RAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(RAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (RAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
-
- /* enable clocks to all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- iounmap(p);
+ r8a7791_pm_init();
}
static int r8a7791_smp_boot_secondary(unsigned int cpu,
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 13ba36a6831f..22d8f87b23e9 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -22,11 +22,13 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/sh73a0.h>
+
#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
+#include "common.h"
+#include "sh73a0.h"
+
#define WUPCR IOMEM(0xe6151010)
#define SRESCR IOMEM(0xe6151018)
#define PSTR IOMEM(0xe6151040)
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 68bc0b82226d..942efdc82a62 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -59,29 +59,37 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
void __init shmobile_init_delay(void)
{
- struct device_node *np, *parent;
- u32 max_freq, freq;
-
- max_freq = 0;
-
- parent = of_find_node_by_path("/cpus");
- if (parent) {
- for_each_child_of_node(parent, np) {
- if (!of_property_read_u32(np, "clock-frequency", &freq))
- max_freq = max(max_freq, freq);
- }
- of_node_put(parent);
- }
+ struct device_node *np, *cpus;
+ bool is_a8_a9 = false;
+ bool is_a15 = false;
+ u32 max_freq = 0;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (!cpus)
+ return;
+
+ for_each_child_of_node(cpus, np) {
+ u32 freq;
+
+ if (!of_property_read_u32(np, "clock-frequency", &freq))
+ max_freq = max(max_freq, freq);
- if (max_freq) {
- if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
- if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
- shmobile_setup_delay_hz(max_freq, 2, 4);
+ if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ of_device_is_compatible(np, "arm,cortex-a9"))
+ is_a8_a9 = true;
+ else if (of_device_is_compatible(np, "arm,cortex-a15"))
+ is_a15 = true;
}
+
+ of_node_put(cpus);
+
+ if (!max_freq)
+ return;
+
+ if (is_a8_a9)
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 2, 4);
}
static void __init shmobile_late_time_init(void)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 0fbd4f156bfa..6434e3b62c13 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -35,4 +35,12 @@ config MACH_SUN7I
select HAVE_ARM_ARCH_TIMER
select SUN5I_HSTIMER
+config MACH_SUN8I
+ bool "Allwinner A23 (sun8i) SoCs support"
+ default ARCH_SUNXI
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GIC
+ select MFD_SUN6I_PRCM
+ select RESET_CONTROLLER
+
endif
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index b6085084e0ff..42d4753683ce 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -130,3 +130,12 @@ DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
.dt_compat = sun7i_board_dt_compat,
.restart = sun4i_restart,
MACHINE_END
+
+static const char * const sun8i_board_dt_compat[] = {
+ "allwinner,sun8i-a23",
+ NULL,
+};
+
+DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
+ .dt_compat = sun8i_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 3621b000a0f6..9f9bc61ca64b 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -44,7 +44,6 @@ static const char *versatile_dt_match[] __initconst = {
DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.map_io = versatile_map_io,
.init_early = versatile_init_early,
- .init_irq = versatile_init_irq,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
.restart = versatile_restart,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c348eaee7ee2..c35f0ec9c929 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -854,7 +854,7 @@ config OUTER_CACHE_SYNC
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
- depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU
+ depends on ARCH_MV78XX0 || ARCH_MVEBU
default y
select OUTER_CACHE
help
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index b5608b1f9fbd..7aae0e5b188c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2100,7 +2100,7 @@ static int omap_system_dma_probe(struct platform_device *pdev)
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (dma_omap2plus()) {
+ if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) {
@@ -2145,7 +2145,8 @@ static int omap_system_dma_remove(struct platform_device *pdev)
char irq_name[4];
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
- remove_irq(dma_irq, &omap24xx_dma_irq);
+ if (dma_irq >= 0)
+ remove_irq(dma_irq, &omap24xx_dma_irq);
} else {
int irq_rel = 0;
for ( ; irq_rel < dma_chan_count; irq_rel++) {
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 301b892d97d9..1c629c2c270f 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -15,7 +15,7 @@ config PLAT_SAMSUNG
config PLAT_S5P
bool
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S5PV210
default y
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
@@ -29,7 +29,7 @@ config PLAT_S5P
config SAMSUNG_PM
bool
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || S5P_PM)
default y
help
Base platform power management code for samsung code
@@ -78,14 +78,14 @@ config SAMSUNG_CLKSRC
used by newer systems such as the S3C64XX.
config S5P_CLOCK
- def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+ def_bool ARCH_S5PV210
help
Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
# options for IRQ support
config S5P_IRQ
- def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+ def_bool ARCH_S5PV210
help
Support common interrupt part for ARCH_S5P SoCs
@@ -93,7 +93,6 @@ config S5P_EXT_INT
bool
help
Use the external interrupts (other than GPIO interrupts.)
- Note: Do not choose this for S5P6440 and S5P6450.
config S5P_GPIO_INT
bool
@@ -143,7 +142,7 @@ config S3C_GPIO_TRACK
config S5P_DEV_UART
def_bool y
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S5PV210
# ADC driver
@@ -397,7 +396,7 @@ config SAMSUNG_PM_GPIO
config SAMSUNG_DMADEV
bool "Use legacy Samsung DMA abstraction"
- depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX
+ depends on CPU_S5PV210 || ARCH_S3C64XX
select DMADEVICES
default y
help
@@ -474,7 +473,6 @@ config S5P_PM
bool
help
Common code for power management support on S5P and newer SoCs
- Note: Do not select this for S5P6440 and S5P6450.
config S5P_SLEEP
bool
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 79690f2f6d3f..468352633101 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -43,7 +43,7 @@ enum s3c_cpu_type {
TYPE_ADCV1, /* S3C24XX */
TYPE_ADCV11, /* S3C2443 */
TYPE_ADCV12, /* S3C2416, S3C2450 */
- TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
+ TYPE_ADCV2, /* S3C64XX */
TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
};
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 5a237db9f9eb..d1d4659025bb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -33,13 +33,6 @@ extern unsigned long samsung_cpu_id;
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_MASK 0xFFFFF000
-#define S5P6440_CPU_ID 0x56440000
-#define S5P6450_CPU_ID 0x36450000
-#define S5P64XX_CPU_MASK 0xFFFFF000
-
-#define S5PC100_CPU_ID 0x43100000
-#define S5PC100_CPU_MASK 0xFFFFF000
-
#define S5PV210_CPU_ID 0x43110000
#define S5PV210_CPU_MASK 0xFFFFF000
@@ -54,9 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
@@ -86,24 +76,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
# define soc_is_s3c64xx() 0
#endif
-#if defined(CONFIG_CPU_S5P6440)
-# define soc_is_s5p6440() is_samsung_s5p6440()
-#else
-# define soc_is_s5p6440() 0
-#endif
-
-#if defined(CONFIG_CPU_S5P6450)
-# define soc_is_s5p6450() is_samsung_s5p6450()
-#else
-# define soc_is_s5p6450() 0
-#endif
-
-#if defined(CONFIG_CPU_S5PC100)
-# define soc_is_s5pc100() is_samsung_s5pc100()
-#else
-# define soc_is_s5pc100() 0
-#endif
-
#if defined(CONFIG_CPU_S5PV210)
# define soc_is_s5pv210() is_samsung_s5pv210()
#else
@@ -177,7 +149,6 @@ extern struct bus_type s3c2440_subsys;
extern struct bus_type s3c2442_subsys;
extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
-extern struct bus_type s5p64x0_subsys;
extern struct bus_type s5pv210_subsys;
extern void (*s5pc1xx_idle)(void);
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index eece188ed188..5f5a28d08c2e 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -94,23 +94,6 @@ extern struct platform_device s5p_device_mixer;
extern struct platform_device s5p_device_onenand;
extern struct platform_device s5p_device_sdo;
-extern struct platform_device s5p6440_device_iis;
-extern struct platform_device s5p6440_device_pcm;
-
-extern struct platform_device s5p6450_device_iis0;
-extern struct platform_device s5p6450_device_iis1;
-extern struct platform_device s5p6450_device_iis2;
-extern struct platform_device s5p6450_device_pcm0;
-
-
-extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_iis0;
-extern struct platform_device s5pc100_device_iis1;
-extern struct platform_device s5pc100_device_iis2;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
-extern struct platform_device s5pc100_device_spdif;
-
extern struct platform_device s5pv210_device_ac97;
extern struct platform_device s5pv210_device_iis0;
extern struct platform_device s5pv210_device_iis1;
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 9ae507270785..5a0e26afb961 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -41,13 +41,6 @@ extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
extern void s3c64xx_fb_gpio_setup_24bpp(void);
/**
- * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pc100_fb_gpio_setup_24bpp(void);
-
-/**
* s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
*
* Initialise the GPIO for an 24bpp LCD display on the RGB interface.
@@ -61,11 +54,4 @@ extern void s5pv210_fb_gpio_setup_24bpp(void);
*/
extern void exynos4_fimd0_gpio_setup_24bpp(void);
-/**
- * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5p64x0_fb_gpio_setup_24bpp(void);
-
#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 8364b4bea8b8..acacc4b88a39 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -57,7 +57,7 @@ extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
extern int s5p_epll_enable(struct clk *clk, int enable);
extern unsigned long s5p_epll_get_rate(struct clk *clk);
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+/* SPDIF clk operations common for S5PV210/C110 and Exynos4 */
extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
extern unsigned long s5p_spdif_get_rate(struct clk *clk);
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index bf650218b40e..f84b6cbc8745 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -56,9 +56,6 @@ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
@@ -68,10 +65,6 @@ extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C2416 SDHCI setup */
@@ -151,76 +144,6 @@ static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
-/* S5P64X0 SDHCI setup */
-
-#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO
-static inline void s5p64x0_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5p64x0_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5p6440_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5p6450_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5p64x0_default_sdhci0(void) { }
-static inline void s5p64x0_default_sdhci1(void) { }
-static inline void s5p6440_default_sdhci2(void) { }
-static inline void s5p6450_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */
-
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-static inline void s5pc100_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
/* S5PV210 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI