diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/configs/cm_x2xx_defconfig | 173 | ||||
| -rw-r--r-- | arch/arm/configs/em_x270_defconfig | 178 | ||||
| -rw-r--r-- | arch/arm/configs/pxa_defconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 17 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/cm-x255.c | 240 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/cm-x270.c | 419 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/cm-x2xx-pci.c | 196 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/cm-x2xx-pci.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/cm-x2xx.c | 538 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/em-x270.c | 1286 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/io.h | 18 |
12 files changed, 0 insertions, 3086 deletions
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig deleted file mode 100644 index fa997ae2673e..000000000000 --- a/arch/arm/configs/cm_x2xx_defconfig +++ /dev/null @@ -1,173 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_ARMCORE=y -CONFIG_PCI=y -CONFIG_PCCARD=m -CONFIG_YENTA=m -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_ENE_TUNE is not set -# CONFIG_YENTA_TOSHIBA is not set -CONFIG_PCMCIA_PXA2XX=m -CONFIG_NO_HZ=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_BNEP=m -CONFIG_BT_HIDP=m -CONFIG_LIB80211=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PXA2XX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_CM_X270=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=m -# CONFIG_SATA_PMP is not set -CONFIG_PATA_PCMCIA=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -CONFIG_NET_PCI=y -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_PXA27x=m -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_UCB1400=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=m -# CONFIG_HWMON is not set -CONFIG_UCB1400_CORE=m -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -# CONFIG_LCD_CLASS_DEVICE is not set -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set -CONFIG_SND_PXA2XX_AC97=m -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=m -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_V3020=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=m -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_FRAME_WARN=0 -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig deleted file mode 100644 index d08f02014755..000000000000 --- a/arch/arm/configs/em_x270_defconfig +++ /dev/null @@ -1,178 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_EM_X270=y -CONFIG_MACH_EXEDA=y -CONFIG_NO_HZ=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_BNEP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HCIBTUSB=m -CONFIG_LIB80211=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PXA2XX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_APMPOWER=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_PXA27x=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_DA9034 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -# CONFIG_TOUCHSCREEN_WM9705 is not set -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=y -CONFIG_POWER_SUPPLY=y -CONFIG_BATTERY_DA9030=y -# CONFIG_HWMON is not set -CONFIG_PMIC_DA903X=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DA903X=y -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_TDO24M=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_DA903X=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_EM_X270=m -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=m -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_DA903X=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_V3020=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=m -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_FRAME_WARN=0 -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index b817c57f05f1..e6559e3350e6 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -38,8 +38,6 @@ CONFIG_MACH_ARCOM_ZEUS=y CONFIG_MACH_BALLOON3=y CONFIG_MACH_CSB726=y CONFIG_CSB726_CSB701=y -CONFIG_MACH_ARMCORE=y -CONFIG_MACH_EM_X270=y CONFIG_MACH_EXEDA=y CONFIG_MACH_CM_X300=y CONFIG_MACH_CAPC7117=y diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f60bc29aef68..f7520a6cc7d4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -123,23 +123,6 @@ config CSB726_CSB701 bool "Enable support for CSB701 baseboard" depends on MACH_CSB726 -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI - select IWMMXT - select HAVE_PCI - select NEED_MACH_IO_H if PCI - select PXA25x - select PXA27x - -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" - select PXA27x - -config MACH_EXEDA - bool "CompuLab eXeda platform" - select PXA27x - config MACH_CM_X300 bool "CompuLab CM-X300 modules" select CPU_PXA300 diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f70728930c4f..177abe584dd5 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -40,11 +40,6 @@ obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o obj-$(CONFIG_MACH_BALLOON3) += balloon3.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o -ifeq ($(CONFIG_PCI),y) -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o -endif -obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c deleted file mode 100644 index ea1e85775759..000000000000 --- a/arch/arm/mach-pxa/cm-x255.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x255.c - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - */ - -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand-gpio.h> -#include <linux/gpio/machine.h> -#include <linux/spi/spi.h> -#include <linux/spi/pxa2xx_spi.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include "pxa25x.h" - -#include "generic.h" - -#define GPIO_NAND_CS (5) -#define GPIO_NAND_ALE (4) -#define GPIO_NAND_CLE (3) -#define GPIO_NAND_RB (10) - -static unsigned long cmx255_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* SSP1 */ - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* SSP2 */ - GPIO81_SSP2_CLK_OUT, - GPIO82_SSP2_FRM_OUT, - GPIO83_SSP2_TXD, - GPIO84_SSP2_RXD, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO33_nCS_5, - GPIO18_RDY, - - /* GPIO */ - GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, - GPIO9_GPIO, /* PC card reset */ - - /* NAND controls */ - GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */ - GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */ - GPIO10_GPIO, /* NAND Ready/Busy */ - - /* interrupts */ - GPIO22_GPIO, /* DM9000 interrupt */ -}; - -#if defined(CONFIG_SPI_PXA2XX) -static struct pxa2xx_spi_controller pxa_ssp_master_info = { - .num_chipselect = 1, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - [0] = { - .modalias = "rtc-max6902", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static void __init cmx255_init_rtc(void) -{ - pxa2xx_set_spi_info(1, &pxa_ssp_master_info); - spi_register_board_info(ARRAY_AND_SIZE(spi_board_info)); -} -#else -static inline void cmx255_init_rtc(void) {} -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition cmx255_nor_partitions[] = { - { - .name = "ARMmon", - .size = 0x00030000, - .offset = 0, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } , { - .name = "ARMmon setup block", - .size = 0x00010000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } , { - .name = "kernel", - .size = 0x00160000, - .offset = MTDPART_OFS_APPEND, - } , { - .name = "ramdisk", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND - } -}; - -static struct physmap_flash_data cmx255_nor_flash_data[] = { - { - .width = 2, /* bankwidth in bytes */ - .parts = cmx255_nor_partitions, - .nr_parts = ARRAY_SIZE(cmx255_nor_partitions) - } -}; - -static struct resource cmx255_nor_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cmx255_nor = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = cmx255_nor_flash_data, - }, - .resource = &cmx255_nor_resource, - .num_resources = 1, -}; - -static void __init cmx255_init_nor(void) -{ - platform_device_register(&cmx255_nor); -} -#else -static inline void cmx255_init_nor(void) {} -#endif - -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) - -static struct gpiod_lookup_table cmx255_nand_gpiod_table = { - .dev_id = "gpio-nand", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH), - }, -}; - -static struct resource cmx255_nand_resource[] = { - [0] = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + 11, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_CS5_PHYS, - .end = PXA_CS5_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct mtd_partition cmx255_nand_parts[] = { - [0] = { - .name = "cmx255-nand", - .size = MTDPART_SIZ_FULL, - .offset = 0, - }, -}; - -static struct gpio_nand_platdata cmx255_nand_platdata = { - .parts = cmx255_nand_parts, - .num_parts = ARRAY_SIZE(cmx255_nand_parts), - .chip_delay = 25, -}; - -static struct platform_device cmx255_nand = { - .name = "gpio-nand", - .num_resources = ARRAY_SIZE(cmx255_nand_resource), - .resource = cmx255_nand_resource, - .id = -1, - .dev = { - .platform_data = &cmx255_nand_platdata, - } -}; - -static void __init cmx255_init_nand(void) -{ - gpiod_add_lookup_table(&cmx255_nand_gpiod_table); - platform_device_register(&cmx255_nand); -} -#else -static inline void cmx255_init_nand(void) {} -#endif - -void __init cmx255_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config)); - - cmx255_init_rtc(); - cmx255_init_nor(); - cmx255_init_nand(); -} diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c deleted file mode 100644 index 9baad11314f2..000000000000 --- a/arch/arm/mach-pxa/cm-x270.c +++ /dev/null @@ -1,419 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x270.c - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - */ - -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/delay.h> - -#include <linux/platform_data/rtc-v3020.h> -#include <video/mbxfb.h> - -#include <linux/spi/spi.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/spi/libertas_spi.h> - -#include "pxa27x.h" -#include <linux/platform_data/usb-ohci-pxa27x.h> -#include <linux/platform_data/mmc-pxamci.h> - -#include "generic.h" - -/* physical address if local-bus attached devices */ -#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) - -/* GPIO IRQ usage */ -#define GPIO83_MMC_IRQ (83) - -#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ) - -/* MMC power enable */ -#define GPIO105_MMC_POWER (105) - -/* WLAN GPIOS */ -#define GPIO19_WLAN_STRAP (19) -#define GPIO102_WLAN_RST (102) - -static unsigned long cmx270_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO98_AC97_SYSCLK, - GPIO113_AC97_nRESET, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* MCI controller */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* SSP1 */ - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* SSP2 */ - GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ - GPIO14_GPIO, - GPIO87_SSP2_TXD, - GPIO88_SSP2_RXD, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO33_nCS_5, - GPIO49_nPWE, - GPIO18_RDY, - - /* GPIO */ - GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, - GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */ - GPIO53_GPIO, /* PC card reset */ - GPIO102_GPIO, /* WLAN reset */ - - /* NAND controls */ - GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO89_GPIO, /* NAND Ready/Busy */ - - /* interrupts */ - GPIO10_GPIO, /* DM9000 interrupt */ - GPIO83_GPIO, /* MMC card detect */ - GPIO95_GPIO, /* WLAN interrupt */ -}; - -/* V3020 RTC */ -#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) -static struct resource cmx270_v3020_resource[] = { - [0] = { - .start = RTC_PHYS_BASE, - .end = RTC_PHYS_BASE + 4, - .flags = IORESOURCE_MEM, - }, -}; - -struct v3020_platform_data cmx270_v3020_pdata = { - .leftshift = 16, -}; - -static struct platform_device cmx270_rtc_device = { - .name = "v3020", - .num_resources = ARRAY_SIZE(cmx270_v3020_resource), - .resource = cmx270_v3020_resource, - .id = -1, - .dev = { - .platform_data = &cmx270_v3020_pdata, - } -}; - -static void __init cmx270_init_rtc(void) -{ - platform_device_register(&cmx270_rtc_device); -} -#else -static inline void cmx270_init_rtc(void) {} -#endif - -/* 2700G graphics */ -#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE) -static u64 fb_dma_mask = ~(u64)0; - -static struct resource cmx270_2700G_resource[] = { - /* frame buffer memory including ODFB and External SDRAM */ - [0] = { - .start = PXA_CS2_PHYS, - .end = PXA_CS2_PHYS + 0x01ffffff, - .flags = IORESOURCE_MEM, - }, - /* Marathon registers */ - [1] = { - .start = PXA_CS2_PHYS + 0x03fe0000, - .end = PXA_CS2_PHYS + 0x03ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static unsigned long cmx270_marathon_on[] = { - GPIO58_GPIO, - GPIO59_GPIO, - GPIO60_GPIO, - GPIO61_GPIO, - GPIO62_GPIO, - GPIO63_GPIO, - GPIO64_GPIO, - GPIO65_GPIO, - GPIO66_GPIO, - GPIO67_GPIO, - GPIO68_GPIO, - GPIO69_GPIO, - GPIO70_GPIO, - GPIO71_GPIO, - GPIO72_GPIO, - GPIO73_GPIO, - GPIO74_GPIO, - GPIO75_GPIO, - GPIO76_GPIO, - GPIO77_GPIO, -}; - -static unsigned long cmx270_marathon_off[] = { - GPIOxx_LCD_TFT_16BPP, -}; - -static int cmx270_marathon_probe(struct fb_info *fb) -{ - int gpio, err; - - for (gpio = 58; gpio <= 77; gpio++) { - err = gpio_request(gpio, "LCD"); - if (err) - return err; - gpio_direction_input(gpio); - } - - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on)); - return 0; -} - -static int cmx270_marathon_remove(struct fb_info *fb) -{ - int gpio; - - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off)); - - for (gpio = 58; gpio <= 77; gpio++) - gpio_free(gpio); - - return 0; -} - -static struct mbxfb_platform_data cmx270_2700G_data = { - .xres = { - .min = 240, - .max = 1200, - .defval = 640, - }, - .yres = { - .min = 240, - .max = 1200, - .defval = 480, - }, - .bpp = { - .min = 16, - .max = 32, - .defval = 16, - }, - .memsize = 8*1024*1024, - .probe = cmx270_marathon_probe, - .remove = cmx270_marathon_remove, -}; - -static struct platform_device cmx270_2700G = { - .name = "mbx-fb", - .dev = { - .platform_data = &cmx270_2700G_data, - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(cmx270_2700G_resource), - .resource = cmx270_2700G_resource, - .id = -1, -}; - -static void __init cmx270_init_2700G(void) -{ - platform_device_register(&cmx270_2700G); -} -#else -static inline void cmx270_init_2700G(void) {} -#endif - -/* PXA27x OHCI controller setup */ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static struct pxaohci_platform_data cmx270_ohci_platform_data = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, -}; - -static void __init cmx270_init_ohci(void) -{ - pxa_set_ohci_info(&cmx270_ohci_platform_data); -} -#else -static inline void cmx270_init_ohci(void) {} -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -static struct pxamci_platform_data cmx270_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -}; - -static struct gpiod_lookup_table cmx270_mci_gpio_table = { - .dev_id = "pxa2xx-mci.0", - .table = { - /* Card detect on GPIO 83 */ - GPIO_LOOKUP("gpio-pxa", GPIO83_MMC_IRQ, "cd", GPIO_ACTIVE_LOW), - /* Power on GPIO 105 */ - GPIO_LOOKUP("gpio-pxa", GPIO105_MMC_POWER, - "power", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init cmx270_init_mmc(void) -{ - gpiod_add_lookup_table(&cmx270_mci_gpio_table); - pxa_set_mci_info(&cmx270_mci_platform_data); -} -#else -static inline void cmx270_init_mmc(void) {} -#endif - -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_controller cm_x270_spi_info = { - .num_chipselect = 1, - .enable_dma = 1, -}; - -static struct pxa2xx_spi_chip cm_x270_libertas_chip = { - .rx_threshold = 1, - .tx_threshold = 1, - .timeout = 1000, - .gpio_cs = 14, -}; - -static unsigned long cm_x270_libertas_pin_config[] = { - /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_GPIO, - GPIO87_SSP2_TXD, - GPIO88_SSP2_RXD, - -}; - -static int cm_x270_libertas_setup(struct spi_device *spi) -{ - int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); - if (err) - return err; - - err = gpio_request(GPIO102_WLAN_RST, "WLAN RST"); - if (err) - goto err_free_strap; - - err = gpio_direction_output(GPIO102_WLAN_RST, 0); - if (err) - goto err_free_strap; - msleep(100); - - err = gpio_direction_output(GPIO19_WLAN_STRAP, 1); - if (err) - goto err_free_strap; - msleep(100); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config)); - - gpio_set_value(GPIO102_WLAN_RST, 1); - msleep(100); - - spi->bits_per_word = 16; - spi_setup(spi); - - return 0; - -err_free_strap: - gpio_free(GPIO19_WLAN_STRAP); - - return err; -} - -static int cm_x270_libertas_teardown(struct spi_device *spi) -{ - gpio_set_value(GPIO102_WLAN_RST, 0); - gpio_free(GPIO102_WLAN_RST); - gpio_free(GPIO19_WLAN_STRAP); - - return 0; -} - -struct libertas_spi_platform_data cm_x270_libertas_pdata = { - .use_dummy_writes = 1, - .setup = cm_x270_libertas_setup, - .teardown = cm_x270_libertas_teardown, -}; - -static struct spi_board_info cm_x270_spi_devices[] __initdata = { - { - .modalias = "libertas_spi", - .max_speed_hz = 13000000, - .bus_num = 2, - .irq = PXA_GPIO_TO_IRQ(95), - .chip_select = 0, - .controller_data = &cm_x270_libertas_chip, - .platform_data = &cm_x270_libertas_pdata, - }, -}; - -static void __init cmx270_init_spi(void) -{ - pxa2xx_set_spi_info(2, &cm_x270_spi_info); - spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices)); -} -#else -static inline void cmx270_init_spi(void) {} -#endif - -void __init cmx270_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config)); - -#ifdef CONFIG_PM - pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); -#endif - - cmx270_init_rtc(); - cmx270_init_mmc(); - cmx270_init_ohci(); - cmx270_init_2700G(); - cmx270_init_spi(); -} diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c deleted file mode 100644 index f1c61c6b5610..000000000000 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ /dev/null @@ -1,196 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x2xx-pci.c - * - * PCI bios-type initialisation for PCI machines - * - * Bits taken from various places. - * - * Copyright (C) 2007, 2008 Compulab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> - -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -#include <asm/hardware/it8152.h> - -void __iomem *it8152_base_address; -static int cmx2xx_it8152_irq_gpio; - -static void cmx2xx_it8152_irq_demux(struct irq_desc *desc) -{ - /* clear our parent irq */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - - it8152_irq_demux(desc); -} - -void __cmx2xx_pci_init_irq(int irq_gpio) -{ - it8152_init_irq(); - - cmx2xx_it8152_irq_gpio = irq_gpio; - - irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); - - irq_set_chained_handler(gpio_to_irq(irq_gpio), - cmx2xx_it8152_irq_demux); -} - -#ifdef CONFIG_PM -static unsigned long sleep_save_ite[10]; - -void __cmx2xx_pci_suspend(void) -{ - /* save ITE state */ - sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); - sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR); - sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR); - - /* Clear ITE IRQ's */ - __raw_writel((0), IT8152_INTC_PDCNIRR); - __raw_writel((0), IT8152_INTC_LPCNIRR); -} - -void __cmx2xx_pci_resume(void) -{ - /* restore IT8152 state */ - __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); - __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR); - __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); -} -#else -void cmx2xx_pci_suspend(void) {} -void cmx2xx_pci_resume(void) {} -#endif - -/* PCI IRQ mapping*/ -static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin); - - irq = it8152_pci_map_irq(dev, slot, pin); - if (irq) - return irq; - - /* - Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-X2XX is - unrealistic. Here we keep mapping for ATXBase and SB-X2XX. - */ - /* ATXBASE PCI slot */ - if (slot == 7) - return IT8152_PCI_INTA; - - /* ATXBase/SB-X2XX CardBus */ - if (slot == 8 || slot == 0) - return IT8152_PCI_INTB; - - /* ATXBase Ethernet */ - if (slot == 9) - return IT8152_PCI_INTA; - - /* CM-x255 Onboard Ethernet */ - if (slot == 15) - return IT8152_PCI_INTC; - - /* SB-x2xx Ethernet */ - if (slot == 16) - return IT8152_PCI_INTA; - - /* PC104+ interrupt routing */ - if ((slot == 17) || (slot == 19)) - return IT8152_PCI_INTA; - if ((slot == 18) || (slot == 20)) - return IT8152_PCI_INTB; - - return(0); -} - -static void cmx2xx_pci_preinit(void) -{ - pr_info("Initializing CM-X2XX PCI subsystem\n"); - - pcibios_min_io = 0; - pcibios_min_mem = 0; - - __raw_writel(0x800, IT8152_PCI_CFG_ADDR); - if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { - pr_info("PCI Bridge found.\n"); - - /* set PCI I/O base at 0 */ - writel(0x848, IT8152_PCI_CFG_ADDR); - writel(0, IT8152_PCI_CFG_DATA); - - /* set PCI memory base at 0 */ - writel(0x840, IT8152_PCI_CFG_ADDR); - writel(0, IT8152_PCI_CFG_DATA); - - writel(0x20, IT8152_GPIO_GPDR); - - /* CardBus Controller on ATXbase baseboard */ - writel(0x4000, IT8152_PCI_CFG_ADDR); - if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { - pr_info("CardBus Bridge found.\n"); - - /* Configure socket 0 */ - writel(0x408C, IT8152_PCI_CFG_ADDR); - writel(0x1022, IT8152_PCI_CFG_DATA); - - writel(0x4080, IT8152_PCI_CFG_ADDR); - writel(0x3844d060, IT8152_PCI_CFG_DATA); - - writel(0x4090, IT8152_PCI_CFG_ADDR); - writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | - 0x60440000), - IT8152_PCI_CFG_DATA); - - writel(0x4018, IT8152_PCI_CFG_ADDR); - writel(0xb0000000, IT8152_PCI_CFG_DATA); - - /* Configure socket 1 */ - writel(0x418C, IT8152_PCI_CFG_ADDR); - writel(0x1022, IT8152_PCI_CFG_DATA); - - writel(0x4180, IT8152_PCI_CFG_ADDR); - writel(0x3844d060, IT8152_PCI_CFG_DATA); - - writel(0x4190, IT8152_PCI_CFG_ADDR); - writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | - 0x60440000), - IT8152_PCI_CFG_DATA); - - writel(0x4118, IT8152_PCI_CFG_ADDR); - writel(0xb0000000, IT8152_PCI_CFG_DATA); - } - } -} - -static struct hw_pci cmx2xx_pci __initdata = { - .map_irq = cmx2xx_pci_map_irq, - .nr_controllers = 1, - .ops = &it8152_ops, - .setup = it8152_pci_setup, - .preinit = cmx2xx_pci_preinit, -}; - -static int __init cmx2xx_init_pci(void) -{ - if (machine_is_armcore()) - pci_common_init(&cmx2xx_pci); - - return 0; -} - -subsys_initcall(cmx2xx_init_pci); diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h deleted file mode 100644 index 93ffaaee75d7..000000000000 --- a/arch/arm/mach-pxa/cm-x2xx-pci.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -extern void __cmx2xx_pci_init_irq(int irq_gpio); -extern void __cmx2xx_pci_suspend(void); -extern void __cmx2xx_pci_resume(void); - -#ifdef CONFIG_PCI -#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x) -#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x) -#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x) -#else -#define cmx2xx_pci_init_irq(x) do {} while (0) -#define cmx2xx_pci_suspend(x) do {} while (0) -#define cmx2xx_pci_resume(x) do {} while (0) -#endif diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c deleted file mode 100644 index ff976d1217eb..000000000000 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ /dev/null @@ -1,538 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x2xx.c - * - * Copyright (C) 2008 CompuLab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - */ - -#include <linux/platform_device.h> -#include <linux/syscore_ops.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/regulator/machine.h> - -#include <linux/dm9000.h> -#include <linux/leds.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include "pxa25x.h" -#undef GPIO24_SSP1_SFRM -#undef GPIO86_GPIO -#undef GPIO87_GPIO -#undef GPIO88_GPIO -#undef GPIO89_GPIO -#include "pxa27x.h" -#undef GPIO24_SSP1_SFRM -#undef GPIO86_GPIO -#undef GPIO87_GPIO -#undef GPIO88_GPIO -#undef GPIO89_GPIO -#include <mach/audio.h> -#include <linux/platform_data/video-pxafb.h> -#include <mach/smemc.h> - -#include <asm/hardware/it8152.h> - -#include "generic.h" -#include "cm-x2xx-pci.h" - -extern void cmx255_init(void); -extern void cmx270_init(void); - -/* reserve IRQs for IT8152 */ -#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) - -/* virtual addresses for statically mapped regions */ -#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000) -#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) - -/* physical address if local-bus attached devices */ -#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22)) -#define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) - -/* leds */ -#define CMX255_GPIO_RED (27) -#define CMX255_GPIO_GREEN (32) -#define CMX270_GPIO_RED (93) -#define CMX270_GPIO_GREEN (94) - -/* GPIO IRQ usage */ -#define GPIO22_ETHIRQ (22) -#define GPIO10_ETHIRQ (10) -#define CMX255_GPIO_IT8152_IRQ (0) -#define CMX270_GPIO_IT8152_IRQ (22) - -#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ) -#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ) - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource cmx255_dm9000_resource[] = { - [0] = { - .start = CMX255_DM9000_PHYS_BASE, - .end = CMX255_DM9000_PHYS_BASE + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CMX255_DM9000_PHYS_BASE + 4, - .end = CMX255_DM9000_PHYS_BASE + 4 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = CMX255_ETHIRQ, - .end = CMX255_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct resource cmx270_dm9000_resource[] = { - [0] = { - .start = CMX270_DM9000_PHYS_BASE, - .end = CMX270_DM9000_PHYS_BASE + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CMX270_DM9000_PHYS_BASE + 8, - .end = CMX270_DM9000_PHYS_BASE + 8 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = CMX270_ETHIRQ, - .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data cmx270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM, -}; - -static struct platform_device cmx2xx_dm9000_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(cmx270_dm9000_resource), - .dev = { - .platform_data = &cmx270_dm9000_platdata, - } -}; - -static void __init cmx2xx_init_dm9000(void) -{ - if (cpu_is_pxa25x()) - cmx2xx_dm9000_device.resource = cmx255_dm9000_resource; - else - cmx2xx_dm9000_device.resource = cmx270_dm9000_resource; - platform_device_register(&cmx2xx_dm9000_device); -} -#else -static inline void cmx2xx_init_dm9000(void) {} -#endif - -/* UCB1400 touchscreen controller */ -#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) -static struct platform_device cmx2xx_ts_device = { - .name = "ucb1400_core", - .id = -1, -}; - -static void __init cmx2xx_init_touchscreen(void) -{ - platform_device_register(&cmx2xx_ts_device); -} -#else -static inline void cmx2xx_init_touchscreen(void) {} -#endif - -/* CM-X270 LEDs */ -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led cmx2xx_leds[] = { - [0] = { - .name = "cm-x2xx:red", - .default_trigger = "nand-disk", - .active_low = 1, - }, - [1] = { - .name = "cm-x2xx:green", - .default_trigger = "heartbeat", - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = { - .num_leds = ARRAY_SIZE(cmx2xx_leds), - .leds = cmx2xx_leds, -}; - -static struct platform_device cmx2xx_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cmx2xx_gpio_led_pdata, - }, -}; - -static void __init cmx2xx_init_leds(void) -{ - if (cpu_is_pxa25x()) { - cmx2xx_leds[0].gpio = CMX255_GPIO_RED; - cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN; - } else { - cmx2xx_leds[0].gpio = CMX270_GPIO_RED; - cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN; - } - platform_device_register(&cmx2xx_led_device); -} -#else -static inline void cmx2xx_init_leds(void) {} -#endif - -#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -/* - Display definitions - keep these for backwards compatibility, although symbolic names (as - e.g. in lpd270.c) looks better -*/ -#define MTYPE_STN320x240 0 -#define MTYPE_TFT640x480 1 -#define MTYPE_CRT640x480 2 -#define MTYPE_CRT800x600 3 -#define MTYPE_TFT320x240 6 -#define MTYPE_STN640x480 7 - -static struct pxafb_mode_info generic_stn_320x240_mode = { - .pixclock = 76923, - .bpp = 8, - .xres = 320, - .yres = 240, - .hsync_len = 3, - .vsync_len = 2, - .left_margin = 3, - .upper_margin = 0, - .right_margin = 3, - .lower_margin = 0, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_stn_320x240 = { - .modes = &generic_stn_320x240_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\ - LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_tft_640x480_mode = { - .pixclock = 38461, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 60, - .vsync_len = 2, - .left_margin = 70, - .upper_margin = 10, - .right_margin = 70, - .lower_margin = 5, - .sync = 0, - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_tft_640x480 = { - .modes = &generic_tft_640x480_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\ - LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_crt_640x480_mode = { - .pixclock = 38461, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 63, - .vsync_len = 2, - .left_margin = 81, - .upper_margin = 33, - .right_margin = 16, - .lower_margin = 10, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_crt_640x480 = { - .modes = &generic_crt_640x480_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_crt_800x600_mode = { - .pixclock = 28846, - .bpp = 8, - .xres = 800, - .yres = 600, - .hsync_len = 63, - .vsync_len = 2, - .left_margin = 26, - .upper_margin = 21, - .right_margin = 26, - .lower_margin = 11, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_crt_800x600 = { - .modes = &generic_crt_800x600_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_tft_320x240_mode = { - .pixclock = 134615, - .bpp = 16, - .xres = 320, - .yres = 240, - .hsync_len = 63, - .vsync_len = 7, - .left_margin = 75, - .upper_margin = 0, - .right_margin = 15, - .lower_margin = 15, - .sync = 0, - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_tft_320x240 = { - .modes = &generic_tft_320x240_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_stn_640x480_mode = { - .pixclock = 57692, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 4, - .vsync_len = 2, - .left_margin = 10, - .upper_margin = 5, - .right_margin = 10, - .lower_margin = 5, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_stn_640x480 = { - .modes = &generic_stn_640x480_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480; - -static int __init cmx2xx_set_display(char *str) -{ - int disp_type = simple_strtol(str, NULL, 0); - switch (disp_type) { - case MTYPE_STN320x240: - cmx2xx_display = &generic_stn_320x240; - break; - case MTYPE_TFT640x480: - cmx2xx_display = &generic_tft_640x480; - break; - case MTYPE_CRT640x480: - cmx2xx_display = &generic_crt_640x480; - break; - case MTYPE_CRT800x600: - cmx2xx_display = &generic_crt_800x600; - break; - case MTYPE_TFT320x240: - cmx2xx_display = &generic_tft_320x240; - break; - case MTYPE_STN640x480: - cmx2xx_display = &generic_stn_640x480; - break; - default: /* fallback to CRT 640x480 */ - cmx2xx_display = &generic_crt_640x480; - break; - } - return 1; -} - -/* - This should be done really early to get proper configuration for - frame buffer. - Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader - has limitied line length for kernel command line, and also it will - break compatibitlty with proprietary releases already in field. -*/ -__setup("monitor=", cmx2xx_set_display); - -static void __init cmx2xx_init_display(void) -{ - pxa_set_fb_info(NULL, cmx2xx_display); -} -#else -static inline void cmx2xx_init_display(void) {} -#endif - -#ifdef CONFIG_PM -static unsigned long sleep_save_msc[10]; - -static int cmx2xx_suspend(void) -{ - cmx2xx_pci_suspend(); - - /* save MSC registers */ - sleep_save_msc[0] = __raw_readl(MSC0); - sleep_save_msc[1] = __raw_readl(MSC1); - sleep_save_msc[2] = __raw_readl(MSC2); - - /* setup power saving mode registers */ - PCFR = 0x0; - PSLR = 0xff400000; - PMCR = 0x00000005; - PWER = 0x80000000; - PFER = 0x00000000; - PRER = 0x00000000; - PGSR0 = 0xC0018800; - PGSR1 = 0x004F0002; - PGSR2 = 0x6021C000; - PGSR3 = 0x00020000; - - return 0; -} - -static void cmx2xx_resume(void) -{ - cmx2xx_pci_resume(); - - /* restore MSC registers */ - __raw_writel(sleep_save_msc[0], MSC0); - __raw_writel(sleep_save_msc[1], MSC1); - __raw_writel(sleep_save_msc[2], MSC2); -} - -static struct syscore_ops cmx2xx_pm_syscore_ops = { - .resume = cmx2xx_resume, - .suspend = cmx2xx_suspend, -}; - -static int __init cmx2xx_pm_init(void) -{ - register_syscore_ops(&cmx2xx_pm_syscore_ops); - - return 0; -} -#else -static int __init cmx2xx_pm_init(void) { return 0; } -#endif - -#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) -static void __init cmx2xx_init_ac97(void) -{ - pxa_set_ac97_info(NULL); -} -#else -static inline void cmx2xx_init_ac97(void) {} -#endif - -static void __init cmx2xx_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - - cmx2xx_pm_init(); - - if (cpu_is_pxa25x()) - cmx255_init(); - else - cmx270_init(); - - cmx2xx_init_dm9000(); - cmx2xx_init_display(); - cmx2xx_init_ac97(); - cmx2xx_init_touchscreen(); - cmx2xx_init_leds(); - - regulator_has_full_constraints(); -} - -static void __init cmx2xx_init_irq(void) -{ - if (cpu_is_pxa25x()) { - pxa25x_init_irq(); - cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ); - } else { - pxa27x_init_irq(); - cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ); - } -} - -#ifdef CONFIG_PCI -/* Map PCI companion statically */ -static struct map_desc cmx2xx_io_desc[] __initdata = { - [0] = { /* PCI bridge */ - .virtual = (unsigned long)CMX2XX_IT8152_VIRT, - .pfn = __phys_to_pfn(PXA_CS4_PHYS), - .length = SZ_64M, - .type = MT_DEVICE - }, -}; - -static void __init cmx2xx_map_io(void) -{ - if (cpu_is_pxa25x()) - pxa25x_map_io(); - - if (cpu_is_pxa27x()) - pxa27x_map_io(); - - iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc)); - - it8152_base_address = CMX2XX_IT8152_VIRT; -} -#else -static void __init cmx2xx_map_io(void) -{ - if (cpu_is_pxa25x()) - pxa25x_map_io(); - - if (cpu_is_pxa27x()) - pxa27x_map_io(); -} -#endif - -MACHINE_START(ARMCORE, "Compulab CM-X2XX") - .atag_offset = 0x100, - .map_io = cmx2xx_map_io, - .nr_irqs = CMX2XX_NR_IRQS, - .init_irq = cmx2xx_init_irq, - /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ - .handle_irq = pxa25x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = cmx2xx_init, -#ifdef CONFIG_PCI - .dma_zone_size = SZ_64M, -#endif - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c deleted file mode 100644 index d8681a331030..000000000000 --- a/arch/arm/mach-pxa/em-x270.c +++ /dev/null @@ -1,1286 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Support for CompuLab EM-X270 platform - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Author: Mike Rapoport <mike@compulab.co.il> - */ - -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <linux/dm9000.h> -#include <linux/platform_data/rtc-v3020.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/mfd/da903x.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> -#include <linux/spi/tdo24m.h> -#include <linux/spi/libertas_spi.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/power_supply.h> -#include <linux/apm-emulation.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/platform_data/i2c-pxa.h> -#include <linux/regulator/userspace-consumer.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "pxa27x.h" -#include "pxa27x-udc.h" -#include <mach/audio.h> -#include <linux/platform_data/video-pxafb.h> -#include <linux/platform_data/usb-ohci-pxa27x.h> -#include <linux/platform_data/mmc-pxamci.h> -#include <linux/platform_data/keypad-pxa27x.h> -#include <linux/platform_data/media/camera-pxa.h> - -#include "generic.h" -#include "devices.h" - -/* EM-X270 specific GPIOs */ -#define GPIO13_MMC_CD (13) -#define GPIO95_MMC_WP (95) -#define GPIO56_NAND_RB (56) -#define GPIO93_CAM_RESET (93) -#define GPIO16_USB_HUB_RESET (16) - -/* eXeda specific GPIOs */ -#define GPIO114_MMC_CD (114) -#define GPIO20_NAND_RB (20) -#define GPIO38_SD_PWEN (38) -#define GPIO37_WLAN_RST (37) -#define GPIO95_TOUCHPAD_INT (95) -#define GPIO130_CAM_RESET (130) -#define GPIO10_USB_HUB_RESET (10) - -/* common GPIOs */ -#define GPIO11_NAND_CS (11) -#define GPIO41_ETHIRQ (41) -#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ) -#define GPIO115_WLAN_PWEN (115) -#define GPIO19_WLAN_STRAP (19) -#define GPIO9_USB_VBUS_EN (9) - -static int mmc_cd; -static int nand_rb; -static int dm9000_flags; -static int cam_reset; -static int usb_hub_reset; - -static unsigned long common_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO98_AC97_SYSCLK, - GPIO113_AC97_nRESET, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* MCI controller */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* QCI */ - GPIO84_CIF_FV, - GPIO25_CIF_LV, - GPIO53_CIF_MCLK, - GPIO54_CIF_PCLK, - GPIO81_CIF_DD_0, - GPIO55_CIF_DD_1, - GPIO51_CIF_DD_2, - GPIO50_CIF_DD_3, - GPIO52_CIF_DD_4, - GPIO48_CIF_DD_5, - GPIO17_CIF_DD_6, - GPIO12_CIF_DD_7, - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* Keypad */ - GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, - GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, - GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, - GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, - GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, - GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, - GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, - GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH, - GPIO103_KP_MKOUT_0, - GPIO104_KP_MKOUT_1, - GPIO105_KP_MKOUT_2, - GPIO106_KP_MKOUT_3, - GPIO107_KP_MKOUT_4, - GPIO108_KP_MKOUT_5, - GPIO96_KP_MKOUT_6, - GPIO22_KP_MKOUT_7, - - /* SSP1 */ - GPIO26_SSP1_RXD, - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO57_SSP1_TXD, - - /* SSP2 */ - GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ - GPIO14_GPIO, - GPIO89_SSP2_TXD, - GPIO88_SSP2_RXD, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO49_nPWE, - GPIO18_RDY, - - /* GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ - - /* power controls */ - GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ - GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ - - /* NAND controls */ - GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - - /* interrupts */ - GPIO41_GPIO, /* DM9000 interrupt */ -}; - -static unsigned long em_x270_pin_config[] = { - GPIO13_GPIO, /* MMC card detect */ - GPIO16_GPIO, /* USB hub reset */ - GPIO56_GPIO, /* NAND Ready/Busy */ - GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ - GPIO95_GPIO, /* MMC Write protect */ -}; - -static unsigned long exeda_pin_config[] = { - GPIO10_GPIO, /* USB hub reset */ - GPIO20_GPIO, /* NAND Ready/Busy */ - GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ - GPIO95_GPIO, /* touchpad IRQ */ - GPIO114_GPIO, /* MMC card detect */ -}; - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource em_x270_dm9000_resource[] = { - [0] = { - .start = PXA_CS2_PHYS, - .end = PXA_CS2_PHYS + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_CS2_PHYS + 8, - .end = PXA_CS2_PHYS + 8 + 0x3f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = EM_X270_ETHIRQ, - .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data em_x270_dm9000_platdata = { - .flags = DM9000_PLATF_NO_EEPROM, -}; - -static struct platform_device em_x270_dm9000 = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(em_x270_dm9000_resource), - .resource = em_x270_dm9000_resource, - .dev = { - .platform_data = &em_x270_dm9000_platdata, - } -}; - -static void __init em_x270_init_dm9000(void) -{ - em_x270_dm9000_platdata.flags |= dm9000_flags; - platform_device_register(&em_x270_dm9000); -} -#else -static inline void em_x270_init_dm9000(void) {} -#endif - -/* V3020 RTC */ -#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) -static struct resource em_x270_v3020_resource[] = { - [0] = { - .start = PXA_CS4_PHYS, - .end = PXA_CS4_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct v3020_platform_data em_x270_v3020_platdata = { - .leftshift = 0, -}; - -static struct platform_device em_x270_rtc = { - .name = "v3020", - .num_resources = ARRAY_SIZE(em_x270_v3020_resource), - .resource = em_x270_v3020_resource, - .id = -1, - .dev = { - .platform_data = &em_x270_v3020_platdata, - } -}; - -static void __init em_x270_init_rtc(void) -{ - platform_device_register(&em_x270_rtc); -} -#else -static inline void em_x270_init_rtc(void) {} -#endif - -/* NAND flash */ -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -static inline void nand_cs_on(void) -{ - gpio_set_value(GPIO11_NAND_CS, 0); -} - -static void nand_cs_off(void) -{ - dsb(); - - gpio_set_value(GPIO11_NAND_CS, 1); -} - -/* hardware specific access to control-lines */ -static void em_x270_nand_cmd_ctl(struct nand_chip *this, int dat, - unsigned int ctrl) -{ - unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W; - - dsb(); - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_ALE) - nandaddr |= (1 << 3); - else - nandaddr &= ~(1 << 3); - if (ctrl & NAND_CLE) - nandaddr |= (1 << 2); - else - nandaddr &= ~(1 << 2); - if (ctrl & NAND_NCE) - nand_cs_on(); - else - nand_cs_off(); - } - - dsb(); - this->legacy.IO_ADDR_W = (void __iomem *)nandaddr; - if (dat != NAND_CMD_NONE) - writel(dat, this->legacy.IO_ADDR_W); - - dsb(); -} - -/* read device ready pin */ -static int em_x270_nand_device_ready(struct nand_chip *this) -{ - dsb(); - - return gpio_get_value(nand_rb); -} - -static struct mtd_partition em_x270_partition_info[] = { - [0] = { - .name = "em_x270-0", - .offset = 0, - .size = SZ_4M, - }, - [1] = { - .name = "em_x270-1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL - }, -}; - -struct platform_nand_data em_x270_nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(em_x270_partition_info), - .partitions = em_x270_partition_info, - .chip_delay = 20, - }, - .ctrl = { - .dev_ready = em_x270_nand_device_ready, - .select_chip = 0, - .cmd_ctrl = em_x270_nand_cmd_ctl, - }, -}; - -static struct resource em_x270_nand_resource[] = { - [0] = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + 12, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device em_x270_nand = { - .name = "gen_nand", - .num_resources = ARRAY_SIZE(em_x270_nand_resource), - .resource = em_x270_nand_resource, - .id = -1, - .dev = { - .platform_data = &em_x270_nand_platdata, - } -}; - -static void __init em_x270_init_nand(void) -{ - int err; - - err = gpio_request(GPIO11_NAND_CS, "NAND CS"); - if (err) { - pr_warn("EM-X270: failed to request NAND CS gpio\n"); - return; - } - - gpio_direction_output(GPIO11_NAND_CS, 1); - - err = gpio_request(nand_rb, "NAND R/B"); - if (err) { - pr_warn("EM-X270: failed to request NAND R/B gpio\n"); - gpio_free(GPIO11_NAND_CS); - return; - } - - gpio_direction_input(nand_rb); - - platform_device_register(&em_x270_nand); -} -#else -static inline void em_x270_init_nand(void) {} -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition em_x270_nor_parts[] = { - { - .name = "Bootloader", - .offset = 0x00000000, - .size = 0x00050000, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, { - .name = "Environment", - .offset = 0x00050000, - .size = 0x00010000, - }, { - .name = "Reserved", - .offset = 0x00060000, - .size = 0x00050000, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, { - .name = "Splashscreen", - .offset = 0x000b0000, - .size = 0x00050000, - } -}; - -static struct physmap_flash_data em_x270_nor_data[] = { - [0] = { - .width = 2, - .parts = em_x270_nor_parts, - .nr_parts = ARRAY_SIZE(em_x270_nor_parts), - }, -}; - -static struct resource em_x270_nor_flash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_1M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device em_x270_physmap_flash = { - .name = "physmap-flash", - .id = 0, - .num_resources = 1, - .resource = &em_x270_nor_flash_resource, - .dev = { - .platform_data = &em_x270_nor_data, - }, -}; - -static void __init em_x270_init_nor(void) -{ - platform_device_register(&em_x270_physmap_flash); -} -#else -static inline void em_x270_init_nor(void) {} -#endif - -/* PXA27x OHCI controller setup */ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static struct regulator *em_x270_usb_ldo; - -static int em_x270_usb_hub_init(void) -{ - int err; - - em_x270_usb_ldo = regulator_get(NULL, "vcc usb"); - if (IS_ERR(em_x270_usb_ldo)) - return PTR_ERR(em_x270_usb_ldo); - - err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en"); - if (err) - goto err_free_usb_ldo; - - err = gpio_request(usb_hub_reset, "hub rst"); - if (err) - goto err_free_vbus_gpio; - - /* USB Hub power-on and reset */ - gpio_direction_output(usb_hub_reset, 1); - gpio_direction_output(GPIO9_USB_VBUS_EN, 0); - err = regulator_enable(em_x270_usb_ldo); - if (err) - goto err_free_rst_gpio; - - gpio_set_value(usb_hub_reset, 0); - gpio_set_value(usb_hub_reset, 1); - regulator_disable(em_x270_usb_ldo); - err = regulator_enable(em_x270_usb_ldo); - if (err) - goto err_free_rst_gpio; - - gpio_set_value(usb_hub_reset, 0); - gpio_set_value(GPIO9_USB_VBUS_EN, 1); - - return 0; - -err_free_rst_gpio: - gpio_free(usb_hub_reset); -err_free_vbus_gpio: - gpio_free(GPIO9_USB_VBUS_EN); -err_free_usb_ldo: - regulator_put(em_x270_usb_ldo); - - return err; -} - -static int em_x270_ohci_init(struct device *dev) -{ - int err; - - /* we don't want to entirely disable USB if the HUB init failed */ - err = em_x270_usb_hub_init(); - if (err) - pr_err("USB Hub initialization failed: %d\n", err); - - /* enable port 2 transiever */ - UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; - - return 0; -} - -static void em_x270_ohci_exit(struct device *dev) -{ - gpio_free(usb_hub_reset); - gpio_free(GPIO9_USB_VBUS_EN); - - if (!IS_ERR(em_x270_usb_ldo)) { - if (regulator_is_enabled(em_x270_usb_ldo)) - regulator_disable(em_x270_usb_ldo); - - regulator_put(em_x270_usb_ldo); - } -} - -static struct pxaohci_platform_data em_x270_ohci_platform_data = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, - .init = em_x270_ohci_init, - .exit = em_x270_ohci_exit, -}; - -static void __init em_x270_init_ohci(void) -{ - pxa_set_ohci_info(&em_x270_ohci_platform_data); -} -#else -static inline void em_x270_init_ohci(void) {} -#endif - -/* MCI controller setup */ -#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -static struct regulator *em_x270_sdio_ldo; - -static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = { - .dev_id = "pxa2xx-mci.0", - .table = { - /* Write protect on GPIO 95 */ - GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static int em_x270_mci_init(struct device *dev, - irq_handler_t em_x270_detect_int, - void *data) -{ - int err; - - em_x270_sdio_ldo = regulator_get(dev, "vcc sdio"); - if (IS_ERR(em_x270_sdio_ldo)) { - dev_err(dev, "can't request SDIO power supply: %ld\n", - PTR_ERR(em_x270_sdio_ldo)); - return PTR_ERR(em_x270_sdio_ldo); - } - - err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - dev_err(dev, "can't request MMC card detect IRQ: %d\n", err); - goto err_irq; - } - - if (!machine_is_em_x270()) { - err = gpio_request(GPIO38_SD_PWEN, "sdio power"); - if (err) { - dev_err(dev, "can't request MMC power control : %d\n", - err); - goto err_gpio_wp; - } - gpio_direction_output(GPIO38_SD_PWEN, 1); - } - - return 0; - -err_gpio_wp: - free_irq(gpio_to_irq(mmc_cd), data); -err_irq: - regulator_put(em_x270_sdio_ldo); - - return err; -} - -static int em_x270_mci_setpower(struct device *dev, unsigned int vdd) -{ - struct pxamci_platform_data* p_d = dev->platform_data; - - if ((1 << vdd) & p_d->ocr_mask) { - int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; - - regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); - return regulator_enable(em_x270_sdio_ldo); - } else { - regulator_disable(em_x270_sdio_ldo); - } - return 0; -} - -static void em_x270_mci_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(mmc_cd), data); - regulator_put(em_x270_sdio_ldo); - - if (!machine_is_em_x270()) - gpio_free(GPIO38_SD_PWEN); -} - -static struct pxamci_platform_data em_x270_mci_platform_data = { - .detect_delay_ms = 250, - .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| - MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| - MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| - MMC_VDD_30_31|MMC_VDD_31_32, - .init = em_x270_mci_init, - .setpower = em_x270_mci_setpower, - .exit = em_x270_mci_exit, -}; - -static void __init em_x270_init_mmc(void) -{ - if (machine_is_em_x270()) - gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table); - - pxa_set_mci_info(&em_x270_mci_platform_data); -} -#else -static inline void em_x270_init_mmc(void) {} -#endif - -/* LCD */ -#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -static struct pxafb_mode_info em_x270_lcd_modes[] = { - [0] = { - .pixclock = 38250, - .bpp = 16, - .xres = 480, - .yres = 640, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 2, - .right_margin = 24, - .lower_margin = 4, - .sync = 0, - }, - [1] = { - .pixclock = 153800, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 2, - .right_margin = 88, - .lower_margin = 2, - .sync = 0, - }, -}; - -static struct pxafb_mach_info em_x270_lcd = { - .modes = em_x270_lcd_modes, - .num_modes = 2, - .lcd_conn = LCD_COLOR_TFT_16BPP, -}; - -static void __init em_x270_init_lcd(void) -{ - pxa_set_fb_info(NULL, &em_x270_lcd); -} -#else -static inline void em_x270_init_lcd(void) {} -#endif - -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_controller em_x270_spi_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, - .gpio_cs = -1, -}; - -static struct tdo24m_platform_data em_x270_tdo24m_pdata = { - .model = TDO35S, -}; - -static struct pxa2xx_spi_controller em_x270_spi_2_info = { - .num_chipselect = 1, - .enable_dma = 1, -}; - -static struct pxa2xx_spi_chip em_x270_libertas_chip = { - .rx_threshold = 1, - .tx_threshold = 1, - .timeout = 1000, - .gpio_cs = 14, -}; - -static unsigned long em_x270_libertas_pin_config[] = { - /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_GPIO, - GPIO89_SSP2_TXD, - GPIO88_SSP2_RXD, -}; - -static int em_x270_libertas_setup(struct spi_device *spi) -{ - int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN"); - if (err) - return err; - - err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); - if (err) - goto err_free_pwen; - - if (machine_is_exeda()) { - err = gpio_request(GPIO37_WLAN_RST, "WLAN RST"); - if (err) - goto err_free_strap; - - gpio_direction_output(GPIO37_WLAN_RST, 1); - msleep(100); - } - - gpio_direction_output(GPIO19_WLAN_STRAP, 1); - msleep(100); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); - - gpio_direction_output(GPIO115_WLAN_PWEN, 0); - msleep(100); - gpio_set_value(GPIO115_WLAN_PWEN, 1); - msleep(100); - - spi->bits_per_word = 16; - spi_setup(spi); - - return 0; - -err_free_strap: - gpio_free(GPIO19_WLAN_STRAP); -err_free_pwen: - gpio_free(GPIO115_WLAN_PWEN); - - return err; -} - -static int em_x270_libertas_teardown(struct spi_device *spi) -{ - gpio_set_value(GPIO115_WLAN_PWEN, 0); - gpio_free(GPIO115_WLAN_PWEN); - gpio_free(GPIO19_WLAN_STRAP); - - if (machine_is_exeda()) { - gpio_set_value(GPIO37_WLAN_RST, 0); - gpio_free(GPIO37_WLAN_RST); - } - - return 0; -} - -struct libertas_spi_platform_data em_x270_libertas_pdata = { - .use_dummy_writes = 1, - .setup = em_x270_libertas_setup, - .teardown = em_x270_libertas_teardown, -}; - -static struct spi_board_info em_x270_spi_devices[] __initdata = { - { - .modalias = "tdo24m", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .controller_data = &em_x270_tdo24m_chip, - .platform_data = &em_x270_tdo24m_pdata, - }, - { - .modalias = "libertas_spi", - .max_speed_hz = 13000000, - .bus_num = 2, - .irq = PXA_GPIO_TO_IRQ(116), - .chip_select = 0, - .controller_data = &em_x270_libertas_chip, - .platform_data = &em_x270_libertas_pdata, - }, -}; - -static void __init em_x270_init_spi(void) -{ - pxa2xx_set_spi_info(1, &em_x270_spi_info); - pxa2xx_set_spi_info(2, &em_x270_spi_2_info); - spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); -} -#else -static inline void em_x270_init_spi(void) {} -#endif - -#if defined(CONFIG_SND_PXA2XX_LIB_AC97) -static pxa2xx_audio_ops_t em_x270_ac97_info = { - .reset_gpio = 113, -}; - -static void __init em_x270_init_ac97(void) -{ - pxa_set_ac97_info(&em_x270_ac97_info); -} -#else -static inline void em_x270_init_ac97(void) {} -#endif - -#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) -static const unsigned int em_x270_module_matrix_keys[] = { - KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), - KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), - KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), -}; - -static struct matrix_keymap_data em_x270_matrix_keymap_data = { - .keymap = em_x270_module_matrix_keys, - .keymap_size = ARRAY_SIZE(em_x270_module_matrix_keys), -}; - -struct pxa27x_keypad_platform_data em_x270_module_keypad_info = { - /* code map for the matrix keys */ - .matrix_key_rows = 3, - .matrix_key_cols = 3, - .matrix_keymap_data = &em_x270_matrix_keymap_data, -}; - -static const unsigned int em_x270_exeda_matrix_keys[] = { - KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL), - KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE), - KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL), - KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH), - - KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M), - KEY(1, 2, KEY_N), KEY(1, 3, KEY_B), - KEY(1, 4, KEY_V), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z), - - KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON), - KEY(2, 2, KEY_L), KEY(2, 3, KEY_K), - KEY(2, 4, KEY_J), KEY(2, 5, KEY_H), - KEY(2, 6, KEY_G), KEY(2, 7, KEY_F), - - KEY(3, 0, KEY_D), KEY(3, 1, KEY_S), - KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB), - KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P), - KEY(3, 6, KEY_O), KEY(3, 7, KEY_I), - - KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y), - KEY(4, 2, KEY_T), KEY(4, 3, KEY_R), - KEY(4, 4, KEY_E), KEY(4, 5, KEY_W), - KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS), - - KEY(5, 0, KEY_0), KEY(5, 1, KEY_9), - KEY(5, 2, KEY_8), KEY(5, 3, KEY_7), - KEY(5, 4, KEY_6), KEY(5, 5, KEY_5), - KEY(5, 6, KEY_4), KEY(5, 7, KEY_3), - - KEY(6, 0, KEY_2), KEY(6, 1, KEY_1), - KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END), - KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP), - KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1), - - KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT), - KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME), - KEY(7, 4, 0), KEY(7, 5, 0), - KEY(7, 6, 0), KEY(7, 7, 0), -}; - -static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = { - .keymap = em_x270_exeda_matrix_keys, - .keymap_size = ARRAY_SIZE(em_x270_exeda_matrix_keys), -}; - -struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = { - /* code map for the matrix keys */ - .matrix_key_rows = 8, - .matrix_key_cols = 8, - .matrix_keymap_data = &em_x270_exeda_matrix_keymap_data, -}; - -static void __init em_x270_init_keypad(void) -{ - if (machine_is_em_x270()) - pxa_set_keypad_info(&em_x270_module_keypad_info); - else - pxa_set_keypad_info(&em_x270_exeda_keypad_info); -} -#else -static inline void em_x270_init_keypad(void) {} -#endif - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button gpio_keys_button[] = { - [0] = { - .desc = "sleep/wakeup", - .code = KEY_SUSPEND, - .type = EV_PWR, - .gpio = 1, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data em_x270_gpio_keys_data = { - .buttons = gpio_keys_button, - .nbuttons = 1, -}; - -static struct platform_device em_x270_gpio_keys = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &em_x270_gpio_keys_data, - }, -}; - -static void __init em_x270_init_gpio_keys(void) -{ - platform_device_register(&em_x270_gpio_keys); -} -#else -static inline void em_x270_init_gpio_keys(void) {} -#endif - -/* Quick Capture Interface and sensor setup */ -#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) -static int em_x270_sensor_init(void) -{ - int ret; - - ret = gpio_request(cam_reset, "camera reset"); - if (ret) - return ret; - - gpio_direction_output(cam_reset, 0); - gpio_set_value(cam_reset, 1); - - return 0; -} - -static struct regulator_consumer_supply camera_dummy_supplies[] = { - REGULATOR_SUPPLY("vdd", "0-005d"), -}; - -static struct regulator_init_data camera_dummy_initdata = { - .consumer_supplies = camera_dummy_supplies, - .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config camera_dummy_config = { - .supply_name = "camera_vdd", - .input_supply = "vcc cam", - .microvolts = 2800000, - .init_data = &camera_dummy_initdata, -}; - -static struct platform_device camera_supply_dummy_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &camera_dummy_config, - }, -}; - -struct pxacamera_platform_data em_x270_camera_platform_data = { - .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, - .mclk_10khz = 2600, - .sensor_i2c_adapter_id = 0, - .sensor_i2c_address = 0x5d, -}; - -static void __init em_x270_init_camera(void) -{ - if (em_x270_sensor_init() == 0) - pxa_set_camera_info(&em_x270_camera_platform_data); - platform_device_register(&camera_supply_dummy_device); -} -#else -static inline void em_x270_init_camera(void) {} -#endif - -static struct regulator_bulk_data em_x270_gps_consumer_supply = { - .supply = "vcc gps", -}; - -static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = { - .name = "vcc gps", - .num_supplies = 1, - .supplies = &em_x270_gps_consumer_supply, -}; - -static struct platform_device em_x270_gps_userspace_consumer = { - .name = "reg-userspace-consumer", - .id = 0, - .dev = { - .platform_data = &em_x270_gps_consumer_data, - }, -}; - -static struct regulator_bulk_data em_x270_gprs_consumer_supply = { - .supply = "vcc gprs", -}; - -static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = { - .name = "vcc gprs", - .num_supplies = 1, - .supplies = &em_x270_gprs_consumer_supply -}; - -static struct platform_device em_x270_gprs_userspace_consumer = { - .name = "reg-userspace-consumer", - .id = 1, - .dev = { - .platform_data = &em_x270_gprs_consumer_data, - } -}; - -static struct platform_device *em_x270_userspace_consumers[] = { - &em_x270_gps_userspace_consumer, - &em_x270_gprs_userspace_consumer, -}; - -static void __init em_x270_userspace_consumers_init(void) -{ - platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers)); -} - -/* DA9030 related initializations */ -#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \ - static struct regulator_consumer_supply _name##_consumers[] = { \ - REGULATOR_SUPPLY(_supply, _dev_name), \ - } - -REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps"); -REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); -REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio"); -REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); -REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs"); -REGULATOR_CONSUMER(buck2, NULL, "vcc_core"); - -#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ - static struct regulator_init_data _ldo##_data = { \ - .constraints = { \ - .min_uV = _min_uV, \ - .max_uV = _max_uV, \ - .state_mem = { \ - .enabled = 0, \ - }, \ - .valid_ops_mask = _ops_mask, \ - .apply_uV = 1, \ - }, \ - .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ - .consumer_supplies = _ldo##_consumers, \ - }; - -REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(ldo10, 2000000, 3200000, - REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); -REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE); - -struct led_info em_x270_led_info = { - .name = "em-x270:orange", - .default_trigger = "battery-charging-or-full", -}; - -struct power_supply_info em_x270_psy_info = { - .name = "battery", - .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, - .voltage_max_design = 4200000, - .voltage_min_design = 3000000, - .use_for_apm = 1, -}; - -static void em_x270_battery_low(void) -{ -#if defined(CONFIG_APM_EMULATION) - apm_queue_event(APM_LOW_BATTERY); -#endif -} - -static void em_x270_battery_critical(void) -{ -#if defined(CONFIG_APM_EMULATION) - apm_queue_event(APM_CRITICAL_SUSPEND); -#endif -} - -struct da9030_battery_info em_x270_batterty_info = { - .battery_info = &em_x270_psy_info, - - .charge_milliamp = 1000, - .charge_millivolt = 4200, - - .vbat_low = 3600, - .vbat_crit = 3400, - .vbat_charge_start = 4100, - .vbat_charge_stop = 4200, - .vbat_charge_restart = 4000, - - .vcharge_min = 3200, - .vcharge_max = 5500, - - .tbat_low = 197, - .tbat_high = 78, - .tbat_restart = 100, - - .batmon_interval = 0, - - .battery_low = em_x270_battery_low, - .battery_critical = em_x270_battery_critical, -}; - -#define DA9030_SUBDEV(_name, _id, _pdata) \ - { \ - .name = "da903x-" #_name, \ - .id = DA9030_ID_##_id, \ - .platform_data = _pdata, \ - } - -#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data) - -struct da903x_subdev_info em_x270_da9030_subdevs[] = { - DA9030_LDO(3), - DA9030_LDO(5), - DA9030_LDO(10), - DA9030_LDO(12), - DA9030_LDO(19), - - DA9030_SUBDEV(regulator, BUCK2, &buck2_data), - - DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), - DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), - DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), -}; - -static struct da903x_platform_data em_x270_da9030_info = { - .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs), - .subdevs = em_x270_da9030_subdevs, -}; - -static struct i2c_board_info em_x270_i2c_pmic_info = { - I2C_BOARD_INFO("da9030", 0x49), - .irq = PXA_GPIO_TO_IRQ(0), - .platform_data = &em_x270_da9030_info, -}; - -static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = { - .use_pio = 1, -}; - -static void __init em_x270_init_da9030(void) -{ - pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info); - i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); -} - -static struct pca953x_platform_data exeda_gpio_ext_pdata = { - .gpio_base = 128, -}; - -static struct i2c_board_info exeda_i2c_info[] = { - { - I2C_BOARD_INFO("pca9555", 0x21), - .platform_data = &exeda_gpio_ext_pdata, - }, -}; - -static struct i2c_pxa_platform_data em_x270_i2c_info = { - .fast_mode = 1, -}; - -static void __init em_x270_init_i2c(void) -{ - pxa_set_i2c_info(&em_x270_i2c_info); - - if (machine_is_exeda()) - i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info)); -} - -static void __init em_x270_module_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); - - mmc_cd = GPIO13_MMC_CD; - nand_rb = GPIO56_NAND_RB; - dm9000_flags = DM9000_PLATF_32BITONLY; - cam_reset = GPIO93_CAM_RESET; - usb_hub_reset = GPIO16_USB_HUB_RESET; -} - -static void __init em_x270_exeda_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); - - mmc_cd = GPIO114_MMC_CD; - nand_rb = GPIO20_NAND_RB; - dm9000_flags = DM9000_PLATF_16BITONLY; - cam_reset = GPIO130_CAM_RESET; - usb_hub_reset = GPIO10_USB_HUB_RESET; -} - -static void __init em_x270_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); - - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - -#ifdef CONFIG_PM - pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); -#endif - - if (machine_is_em_x270()) - em_x270_module_init(); - else if (machine_is_exeda()) - em_x270_exeda_init(); - else - panic("Unsupported machine: %d\n", machine_arch_type); - - em_x270_init_da9030(); - em_x270_init_dm9000(); - em_x270_init_rtc(); - em_x270_init_nand(); - em_x270_init_nor(); - em_x270_init_lcd(); - em_x270_init_mmc(); - em_x270_init_ohci(); - em_x270_init_keypad(); - em_x270_init_gpio_keys(); - em_x270_init_ac97(); - em_x270_init_spi(); - em_x270_init_i2c(); - em_x270_init_camera(); - em_x270_userspace_consumers_init(); - - regulator_has_full_constraints(); -} - -MACHINE_START(EM_X270, "Compulab EM-X270") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = em_x270_init, - .restart = pxa_restart, -MACHINE_END - -MACHINE_START(EXEDA, "Compulab eXeda") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = em_x270_init, - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h deleted file mode 100644 index d54031c4f3df..000000000000 --- a/arch/arm/mach-pxa/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-pxa/include/mach/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) - -#endif |