diff options
Diffstat (limited to 'arch/arm')
606 files changed, 16892 insertions, 9324 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4f799e567fc8..cdfa6c2b7626 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,10 +527,10 @@ config ARCH_LPC32XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_LPC32XX + select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select HAVE_IDE select USE_OF help Support for the NXP LPC32XX family of processors @@ -547,6 +547,7 @@ config ARCH_PXA select CLKSRC_PXA select CLKSRC_MMIO select CLKSRC_OF + select CPU_XSCALE if !CPU_XSC3 select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE @@ -572,7 +573,6 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT_MAP - select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -623,6 +623,7 @@ config ARCH_DAVINCI select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP @@ -724,6 +725,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-alpine/Kconfig" +source "arch/arm/mach-artpec/Kconfig" + source "arch/arm/mach-asm9260/Kconfig" source "arch/arm/mach-at91/Kconfig" @@ -879,10 +882,16 @@ config ARCH_STM32 select ARCH_HAS_RESET_CONTROLLER select ARMV7M_SYSTICK select CLKSRC_STM32 + select PINCTRL select RESET_CONTROLLER help Support for STMicroelectronics STM32 processors. +config MACH_STM32F429 + bool "STMicrolectronics STM32F429" + depends on ARCH_STM32 + default y + # Definitions to make life easier config ARCH_ACORN bool @@ -1212,7 +1221,6 @@ config PCI_HOST_ITE8152 select DMABOUNCE source "drivers/pci/Kconfig" -source "drivers/pci/pcie/Kconfig" source "drivers/pcmcia/Kconfig" @@ -1337,7 +1345,6 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC - select ARM_CPU_SUSPEND select CPU_PM help The big.LITTLE "switcher" provides the core functionality to @@ -2111,7 +2118,8 @@ config ARCH_SUSPEND_POSSIBLE def_bool y config ARM_CPU_SUSPEND - def_bool PM_SLEEP + def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW + depends on ARCH_SUSPEND_POSSIBLE config ARCH_HIBERNATION_POSSIBLE bool diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c6b6175d0203..1098e91d6d3f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1368,6 +1368,7 @@ config DEBUG_SIRFSOC_UART config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 + default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART @@ -1656,6 +1657,14 @@ config DEBUG_UART_8250_WORD DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ DEBUG_BRCMSTB_UART +config DEBUG_UART_8250_PALMCHIP + bool "8250 UART is Palmchip BK-310x" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + help + Palmchip provides a UART implementation compatible with 16550 + except for having a different register layout. Say Y here if + the debug UART is of this type. + config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fe254108d1d9..8c3ce2ac44c4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -154,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_ALPINE) += alpine +machine-$(CONFIG_ARCH_ARTPEC) += artpec machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm @@ -352,7 +353,6 @@ archclean: # My testing targets (bypasses dependencies) bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage -i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ define archhelp diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7aee927f..48fab15cfc02 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -88,7 +88,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) @$(kecho) ' Kernel: $@ is ready' -PHONY += initrd FORCE +PHONY += initrd initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) @@ -107,12 +107,4 @@ uinstall: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/uImage System.map "$(INSTALL_PATH)" -zi: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/zImage System.map "$(INSTALL_PATH)" - -i: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/Image System.map "$(INSTALL_PATH)" - subdir- := bootp compressed dts diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 0714e0334e33..86b2f5d28240 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -3,11 +3,7 @@ bswapsdi2.S font.c lib1funcs.S hyp-stub.S -piggy.gzip -piggy.lzo -piggy.lzma -piggy.xzkern -piggy.lz4 +piggy_data vmlinux vmlinux.lds diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 4c23a68a0917..d50430c40045 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -66,11 +66,11 @@ endif CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" -suffix_$(CONFIG_KERNEL_GZIP) = gzip -suffix_$(CONFIG_KERNEL_LZO) = lzo -suffix_$(CONFIG_KERNEL_LZMA) = lzma -suffix_$(CONFIG_KERNEL_XZ) = xzkern -suffix_$(CONFIG_KERNEL_LZ4) = lz4 +compress-$(CONFIG_KERNEL_GZIP) = gzip +compress-$(CONFIG_KERNEL_LZO) = lzo +compress-$(CONFIG_KERNEL_LZMA) = lzma +compress-$(CONFIG_KERNEL_XZ) = xzkern +compress-$(CONFIG_KERNEL_LZ4) = lz4 # Borrowed libfdt files for the ATAG compatibility mode @@ -89,15 +89,12 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif -targets := vmlinux vmlinux.lds \ - piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \ - bswapsdi2.S font.o font.c head.o misc.o $(OBJS) +targets := vmlinux vmlinux.lds piggy_data piggy.o \ + lib1funcs.o ashldi3.o bswapsdi2.o \ + head.o $(OBJS) -# Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ - lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ - hyp-stub.S +clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ + $(libfdt) $(libfdt_hdrs) hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING @@ -106,6 +103,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif +# -fstack-protector-strong triggers protection checks in this code, +# but it is being used too early to link to meaningful stack_chk logic. +nossp_flags := $(call cc-option, -fno-stack-protector) +CFLAGS_atags_to_fdt.o := $(nossp_flags) +CFLAGS_fdt.o := $(nossp_flags) +CFLAGS_fdt_ro.o := $(nossp_flags) +CFLAGS_fdt_rw.o := $(nossp_flags) +CFLAGS_fdt_wip.o := $(nossp_flags) + ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE @@ -169,22 +175,24 @@ fi efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ $(bswapsdi2) $(efi-obj-y) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) -$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE - $(call if_changed,$(suffix_y)) +$(obj)/piggy_data: $(obj)/../Image FORCE + $(call if_changed,$(compress-y)) -$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/piggy_data CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) +AFLAGS_hyp-stub.o := -Wa,-march=armv7-a + $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.S index a68adf91a165..f72088495f43 100644 --- a/arch/arm/boot/compressed/piggy.gzip.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.gzip" + .incbin "arch/arm/boot/compressed/piggy_data" .globl input_data_end input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S deleted file mode 100644 index 3d9a575618a3..000000000000 --- a/arch/arm/boot/compressed/piggy.lz4.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lz4" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S deleted file mode 100644 index d7e69cffbc0a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzma.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzma" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S deleted file mode 100644 index a425ad95959a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzo.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzo" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S deleted file mode 100644 index 5703f300d027..000000000000 --- a/arch/arm/boot/compressed/piggy.xzkern.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.xzkern" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index 36e53ef9200f..689467448736 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -65,6 +65,15 @@ size_t strlen(const char *s) return sc - s; } +size_t strnlen(const char *s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + int memcmp(const void *cs, const void *ct, size_t count) { const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70e8b26..52b34a004b70 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -2,6 +2,8 @@ ifeq ($(CONFIG_OF),y) dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb +dtb-$(CONFIG_MACH_ARTPEC6) += \ + artpec6-devboard.dtb dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC @@ -60,6 +62,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ + bcm2835-rpi-a.dtb \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ @@ -79,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ + bcm47094-dlink-dir-885l.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012k.dtb @@ -156,7 +160,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ dtb-$(CONFIG_ARCH_KEYSTONE) += \ k2hk-evm.dtb \ k2l-evm.dtb \ - k2e-evm.dtb + k2e-evm.dtb \ + keystone-k2g-evm.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ kirkwood-blackarmor-nas220.dtb \ @@ -189,9 +194,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-laplug.dtb \ + kirkwood-linkstation-lsqvl.dtb \ + kirkwood-linkstation-lsvl.dtb \ + kirkwood-linkstation-lswsxl.dtb \ + kirkwood-linkstation-lswvl.dtb \ + kirkwood-linkstation-lswxl.dtb \ kirkwood-lschlv2.dtb \ - kirkwood-lswvl.dtb \ - kirkwood-lswxl.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ @@ -460,6 +468,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-sniper.dtb \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ @@ -514,6 +523,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ @@ -524,6 +534,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -611,6 +622,7 @@ dtb-$(CONFIG_ARCH_STI) += \ stih418-b2199.dtb dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ + stm32f469-disco.dtb \ stm32429i-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ @@ -666,8 +678,10 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ + sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ + sun7i-a20-lamobo-r1.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ @@ -691,6 +705,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ + sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-cubietruck-plus.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -809,6 +825,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ + mt7623-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index 9af2d60e9a7f..db8752fc480e 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -155,6 +155,16 @@ ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <96>; + al,msi-num-spis = <64>; }; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index ded1eb64ea52..6c667fb35449 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -236,7 +236,11 @@ status = "okay"; nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; ti,nand-xfer-type = "polled"; @@ -257,12 +261,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index f3db13d2d90e..0cc150b87b86 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -285,8 +285,10 @@ }; }; + +/include/ "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; /* * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only * mode") at poweroff. Most BeagleBone versions do not support RTC-only @@ -307,17 +309,12 @@ ti,pmic-shutdown-controller; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -327,7 +324,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -337,25 +333,21 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3a"; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index fda457b07e15..95461a28bc98 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -7,6 +7,7 @@ * published by the Free Software Foundation. */ #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Grinn AM335x ChiliSOM"; @@ -128,21 +129,16 @@ }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -152,7 +148,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -162,28 +157,24 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-boot-on; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-boot-on; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-boot-on; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3d"; regulator-boot-on; regulator-always-on; @@ -218,7 +209,11 @@ pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -237,12 +232,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 42e9b665582a..e835644c5054 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "CompuLab CM-T335"; @@ -40,12 +41,51 @@ regulator-max-microvolt = <3300000>; }; + /* Regulator for WiFi */ + vwlan_fixed: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vwlan_fixed"; + gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */ + enable-active-high; + regulator-boot-off; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "cm-t335"; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Headphone", "Headphone Jack"; + + simple-audio-card,routing = + "Headphone Jack", "LHPOUT", + "Headphone Jack", "RHPOUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic Jack"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23>; + system-clock-frequency = <12000000>; + }; + }; }; &am33xx_pinmux { @@ -134,6 +174,24 @@ >; }; + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* uart1_ctsn.dcan0_tx */ + AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) + /* uart1_rtsn.dcan0_rx */ + AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2) + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* uart1_rxd.dcan1_tx */ + AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) + /* uart1_txd.dcan1_rx */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2) + >; + }; + ecap0_pins: pinmux_ecap0_pins { pinctrl-single,pins = < /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ @@ -223,6 +281,21 @@ >; }; + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0) + /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0) + /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) + /* spi0_cs1.spi0_cs1 */ + AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0) + >; + }; + /* wl1271 bluetooth */ bluetooth_pins: pinmux_bluetooth_pins { pinctrl-single,pins = < @@ -230,6 +303,30 @@ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + /* TLV320AIC23B codec */ + mcasp1_pins: pinmux_mcasp1_pins { + pinctrl-single,pins = < + /* MII1_CRS.mcasp1_aclkx */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* MII1_RX_ER.mcasp1_fsx */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* MII1_COL.mcasp1_axr2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* RMII1_REF_CLK.mcasp1_axr3 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) + >; + }; + + /* wl1271 WiFi */ + wifi_pins: pinmux_wifi_pins { + pinctrl-single,pins = < + /* EMU1.gpio3_8 - WiFi IRQ */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) + /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) + >; + }; }; &uart0 { @@ -264,6 +361,13 @@ status = "okay"; compatible = "emmicro,em3027"; reg = <0x56>; }; + /* Audio codec */ + tlv320aic23: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; }; &usb { @@ -302,7 +406,11 @@ status = "okay"; pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -321,12 +429,9 @@ status = "okay"; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ @@ -394,3 +499,70 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; }; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; +}; + +/* Touschscreen and analog digital converter */ +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x01 0x10 0x23 0x32>; + ti,charge-delay = <0x400>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/* CPU audio */ +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 16 serializers */ + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; + + #sound-dai-cells= <0>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + ti,pindir-d0-out-d1-in = <1>; + /* WLS1271 WiFi */ + wlcore: wlcore@1 { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins>; + reg = <1>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0d6a68ce434a..28b916210271 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -519,7 +519,11 @@ pinctrl-0 = <&nandflash_pins_s0>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -538,12 +542,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 54f113546ecc..6c3a9bf3638a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -11,6 +11,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { cpus { @@ -129,7 +130,11 @@ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-width = <1>; @@ -147,12 +152,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 77559a1ded60..f313999c503e 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -375,15 +375,11 @@ wp-gpios = <&gpio3 18 0>; }; -&tps { - compatible = "ti,tps65217"; +#include "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* +1.5V voltage with ±4% tolerance */ regulator-min-microvolt = <1450000>; regulator-max-microvolt = <1550000>; @@ -392,7 +388,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <915000>; @@ -402,7 +397,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <915000>; @@ -412,7 +406,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -421,7 +414,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; @@ -430,7 +422,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -439,7 +430,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 471a3a70ea1f..8867aaaec54d 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -420,9 +420,9 @@ vin-supply = <&vbat>; }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { backlight { isel = <1>; /* ISET1 */ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */ @@ -430,17 +430,12 @@ }; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDD_1V8 system supply */ regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -450,7 +445,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -460,21 +454,18 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC 1.8V always-on supply */ regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; /* 3.3V rail */ regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_3V3A 3.3V rail */ regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; @@ -482,7 +473,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3B 3.3V rail */ regulator-name = "vdd_3v3b"; regulator-always-on; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index c20ae6c6f6c7..d4b7f3bd553f 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -8,6 +8,7 @@ */ #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Phytec AM335x phyCORE"; @@ -165,7 +166,11 @@ pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ nandflash: nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-nand = "true"; @@ -184,13 +189,10 @@ gpmc,access-ns = <30>; gpmc,rd-cycle-ns = <30>; gpmc,wr-cycle-ns = <30>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <50>; gpmc,cycle2cycle-diffcsen; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1b5b044fcd91..865de8500f1c 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -46,7 +46,7 @@ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; front_button { @@ -54,7 +54,7 @@ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = <KEY_FRONT>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index d38edfa53bb9..a6efbe6eda3b 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -19,6 +19,10 @@ }; }; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -63,12 +67,28 @@ default-brightness-level = <6>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* audio external oscillator */ + tlv320aic3x_mclk: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; /* 24.576MHz */ + }; + }; + sound { compatible = "ti,da830-evm-audio"; ti,model = "AM335x-SL50"; ti,audio-codec = <&audio_codec>; ti,mcasp-controller = <&mcasp0>; - ti,codec-clock-rate = <12000000>; + + clocks = <&tlv320aic3x_mclk>; + clock-names = "mclk"; + ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", @@ -226,7 +246,7 @@ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ >; }; @@ -375,19 +395,16 @@ pinctrl-0 = <&uart4_pins>; }; +#include "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NNMI */ regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDDS_DDR */ regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -395,7 +412,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -405,7 +421,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -415,7 +430,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC / VIO / VDDS*/ regulator-always-on; regulator-min-microvolt = <1800000>; @@ -423,7 +437,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* VDD_3V3AUX */ regulator-always-on; regulator-min-microvolt = <3300000>; @@ -431,7 +444,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_1V8 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -439,7 +451,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3A */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 04885f9f959e..55ca9c7dcf6a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -439,6 +439,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -865,6 +866,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index df955ba4dc62..6e4f5af3d8f8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -73,7 +73,7 @@ global_timer: timer@48240200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x48240200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -81,7 +81,7 @@ local_timer: timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -290,6 +290,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -893,21 +894,11 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; - am43xx_control_usb2phy1: control-phy@44e10620 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10620 0x4>; - reg-names = "power"; - }; - - am43xx_control_usb2phy2: control-phy@0x44e10628 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10628 0x4>; - reg-names = "power"; - }; - ocp2scp0: ocp2scp@483a8000 { compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; @@ -918,7 +909,7 @@ usb2_phy1: phy@483a8000 { compatible = "ti,am437x-usb2"; reg = <0x483a8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x620>; clocks = <&usb_phy0_always_on_clk32k>, <&usb_otg_ss0_refclk960m>; clock-names = "wkupclk", "refclk"; @@ -937,7 +928,7 @@ usb2_phy2: phy@483e8000 { compatible = "ti,am437x-usb2"; reg = <0x483e8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0x628>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", "refclk"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 8677f4cce9e9..9551c4713173 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -146,7 +146,11 @@ pinctrl-0 = <&nand_flash_x8>; ranges = <0 0 0x08000000 0x1000000>; nand@0,0 { - reg = <0 0 0>; + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; @@ -166,17 +170,12 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wait-pin = <0>; - #address-cells = <1>; #size-cells = <1>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 64d43325bcbc..8889be1ca1c3 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -590,8 +590,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; @@ -599,7 +597,7 @@ * 0x264 represents the offset of padconf register of * gpio3_22 from am43xx_pinmux base. */ - interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, <&am43xx_pinmux 0x264>; interrupt-names = "tsc", "wakeup"; @@ -812,9 +810,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -833,11 +835,9 @@ gpmc,access-ns = <30>; gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 746fd2b17958..83dfafaaba1b 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -18,7 +18,7 @@ / { model = "TI AM43x EPOS EVM"; - compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43"; aliases { display0 = &lcd0; @@ -491,7 +491,7 @@ pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; - interrupts = <17 0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; @@ -561,9 +561,13 @@ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -582,11 +586,9 @@ gpmc,access-ns = <30>; /* tCEA + 4*/ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 36c0fa6c362a..0a5fc5d02ce2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -24,7 +24,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; + reg = <0x0 0x80000000 0x0 0x80000000>; }; vdd_3v3: fixedregulator-vdd_3v3 { @@ -173,6 +173,8 @@ sound0_master: simple-audio-card,codec { sound-dai = <&tlv320aic3104>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; clocks = <&clkout2_clk>; }; }; @@ -560,8 +562,7 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; - ti,enable-id-detection; - id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; }; }; @@ -591,6 +592,11 @@ DRVDD-supply = <&vdd_3v3>; DVDD-supply = <&aic_dvdd>; }; + + eeprom: eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; }; &i2c3 { @@ -796,6 +802,8 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp3_pins_default>; pinctrl-1 = <&mcasp3_pins_sleep>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&sys_clkin2>; status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index c53882643ae9..14f912a1b4fd 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -21,7 +21,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */ + reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ }; leds { @@ -167,7 +167,7 @@ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -492,14 +492,14 @@ pinctrl-names = "default"; pinctrl-0 = <&qspi1_pins>; - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; spi_flash: spi_flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; /* CS0 */ - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; partition@0 { label = "uboot"; @@ -545,7 +545,7 @@ ti,debounce-tol = /bits/ 16 <10>; ti,debounce-rep = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; @@ -559,13 +559,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -588,7 +588,7 @@ }; &usb2 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &mcasp3 { diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 77bb8e17401a..988e99632d49 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -25,8 +25,8 @@ &dra7_pmx_core { uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; @@ -108,9 +108,9 @@ pinctrl-0 = <&i2c5_pins_default>; clock-frequency = <400000>; - eeprom_base: atmel@50 { + eeprom_base: atmel@54 { compatible = "atmel,24c08"; - reg = <0x50>; + reg = <0x54>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 1bc64cda819e..652d85b28aaa 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -53,6 +53,14 @@ regulator-boot-on; }; + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -106,6 +114,53 @@ clock-frequency = <0>; }; + flash@30000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x30000000 0x4000000>; + bank-width = <4>; + }; + + fpga_flash@38000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x38000000 0x800000>; + bank-width = <4>; + }; + + /* + * The "secure flash" contains things like the boot + * monitor so we don't want people to accidentally + * screw this up. Mark the device tree node disabled + * by default. + */ + secflash@3c000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x3c000000 0x4000000>; + bank-width = <4>; + status = "disabled"; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet@3a000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x3a000000 0x10000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb@3b000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x3b000000 0x20000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + port1-otg; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -176,6 +231,41 @@ label = "versatile:7"; default-state = "off"; }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; }; /* Primary DevChip GIC synthesized with the CPU */ @@ -297,6 +387,13 @@ clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; + + /* Direct-mapped development chip ROM */ + pb1176_rom@10200000 { + compatible = "direct-mapped"; + reg = <0x10200000 0x4000>; + bank-width = <1>; + }; }; /* These peripherals are inside the FPGA rather than the DevChip */ @@ -306,6 +403,27 @@ compatible = "simple-bus"; ranges; + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + fpga_aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + fpga_mci: mmcsd@10005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x10005000 0x1000>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index da755c9851a7..63d6a051839f 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -230,14 +230,14 @@ flash0@40000000 { /* 2 * 32MiB NOR Flash memory */ - compatible = "arm,vexpress-flash", "cfi-flash"; + compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; }; flash1@44000000 { // 2 * 32MiB NOR Flash memory - compatible = "arm,vexpress-flash", "cfi-flash"; + compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index bb280de511da..2364fc56ae13 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -168,6 +168,33 @@ spi-max-frequency = <50000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3aa980ad64f0..d5e19cd4d256 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -200,7 +200,7 @@ &pinctrl { pwr_led_pin: pwr-led-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; stat_led_pins: stat-led-pins { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index faa474874cb8..11565752b9f6 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -297,7 +297,7 @@ backup_led_pin: backup-led-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; power_led_pin: power-led-pin { diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 836bcc07afc5..8ca7a4340c0f 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -339,7 +339,7 @@ fan_ctrl_high_pin: fan-ctrl-high-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; fan_alarm_pin: fan-alarm-pin { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 7ccce7529b0c..cc952cf8ec30 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -529,7 +529,7 @@ }; sata@a0000 { - compatible = "marvell,orion-sata"; + compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 14>, <&gateclk 20>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index acd5b1519edb..2d3fd6e76e2c 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -61,7 +61,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi1: spi@10680 { @@ -134,18 +135,27 @@ }; }; + /* CON3 */ ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; + bm,pool-short = <3>; }; + /* CON2 */ ethernet@34000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; + /* CON4 */ ethernet@70000 { pinctrl-names = "default"; @@ -157,6 +167,13 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; + }; + + bm@c8000 { + status = "okay"; }; nfc: flash@d0000 { @@ -178,6 +195,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index c6e180eb3b11..c60206efb583 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -78,6 +78,9 @@ internal-regs { ethernet@30000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <1>; status = "okay"; fixed-link { @@ -88,6 +91,9 @@ ethernet@34000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + bm,pool-short = <1>; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index ff47af57f091..ea93ed727030 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -66,7 +66,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -99,6 +100,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; usb@58000 { @@ -109,6 +113,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; mdio@72004 { @@ -129,6 +136,10 @@ status = "okay"; }; + bm@c8000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -169,6 +180,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index cd316021d6ce..fd75e5e9550f 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -44,8 +44,8 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Marvell Armada 385 GP"; - compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; + model = "Marvell Armada 388 DB-88F6820-GP"; + compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; chosen { stdout-path = "serial0:115200n8"; @@ -60,7 +60,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -133,6 +134,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; /* CON4 */ @@ -152,6 +156,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; @@ -186,6 +193,10 @@ }; }; + bm@c8000 { + status = "okay"; + }; + sata@e0000 { pinctrl-names = "default"; pinctrl-0 = <&sata2_pins>, <&sata3_pins>; @@ -229,17 +240,21 @@ /* CON5 */ usb3@f0000 { - vcc-supply = <®_usb2_1_vbus>; + usb-phy = <&usb2_1_phy>; status = "okay"; }; /* CON7 */ usb3@f8000 { - vcc-supply = <®_usb3_vbus>; + usb-phy = <&usb3_phy>; status = "okay"; }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* @@ -273,13 +288,22 @@ }; }; + usb2_1_phy: usb2_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb2_1_vbus>; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; }; @@ -299,7 +323,6 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; }; @@ -309,7 +332,7 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; }; @@ -318,7 +341,6 @@ regulator-name = "v5.0-sata0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata0>; }; @@ -327,7 +349,6 @@ regulator-name = "v12.0-sata0"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata0>; }; @@ -337,7 +358,7 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; }; @@ -346,7 +367,6 @@ regulator-name = "v5.0-sata1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata1>; }; @@ -355,7 +375,6 @@ regulator-name = "v12.0-sata1"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata1>; }; @@ -363,7 +382,7 @@ compatible = "regulator-fixed"; regulator-name = "pwr_en_sata2"; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; }; @@ -372,7 +391,6 @@ regulator-name = "v5.0-sata2"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata2>; }; @@ -381,7 +399,6 @@ regulator-name = "v12.0-sata2"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata2>; }; @@ -389,7 +406,7 @@ compatible = "regulator-fixed"; regulator-name = "pwr_en_sata3"; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; }; @@ -398,7 +415,6 @@ regulator-name = "v5.0-sata3"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata3>; }; @@ -407,7 +423,6 @@ regulator-name = "v12.0-sata3"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata3>; }; }; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 3f792a563c05..8c9842237b60 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -58,7 +58,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { ethernet@70000 { @@ -66,6 +67,9 @@ pinctrl-names = "default"; phy = <&phy_dedicated>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; status = "okay"; }; @@ -110,6 +114,15 @@ pinctrl-names = "default"; status = "okay"; }; + + bm@c8000 { + status = "okay"; + }; }; + + bm-bppi { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index e8b7f6726772..3312be6c82cc 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -429,6 +429,27 @@ reg = <0x22000 0x1000>; }; + /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -493,15 +514,6 @@ }; }; - eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - tx-csum-limit = <9800>; - status = "disabled"; - }; - mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; @@ -540,6 +552,14 @@ status = "disabled"; }; + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -618,6 +638,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 23fc670c0427..5c21b236721f 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f774101416a5..62422a90aeb2 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -76,8 +76,9 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -181,21 +182,33 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + }; + + bm@c0000 { + status = "okay"; }; mvsdio@d4000 { @@ -229,6 +242,38 @@ spi-max-frequency = <20000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + + }; + }; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 4878d7353069..061f4237760e 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -95,8 +95,9 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -196,21 +197,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; /* Front-side USB slot */ @@ -235,6 +244,10 @@ }; }; + bm@c0000 { + status = "okay"; + }; + nand@d0000 { status = "okay"; num-cs = <1>; @@ -243,5 +256,9 @@ nand-on-flash-bbt; }; }; + + bm-bppi { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 13cf69a8d0fb..8af463f26ea1 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -65,8 +65,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; @@ -152,6 +152,7 @@ nand-on-flash-bbt; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 6e9820e141f8..b89e6cf1271a 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -70,8 +70,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 6ab33837a2b6..6522b04f4a8e 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -68,8 +68,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 62175a8848bc..d19f44c70925 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -64,8 +64,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index a5db17782e08..ed3b889d16ce 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,9 +65,10 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -176,21 +177,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; i2c@11000 { status = "okay"; @@ -219,6 +228,14 @@ usb@51000 { status = "okay"; }; + + bm@c0000 { + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 2391b11dc546..d17dab0a6f51 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -78,8 +78,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; + MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index be23196829bb..553349c07f28 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -253,6 +253,14 @@ marvell,crypto-sram-size = <0x800>; }; + bm: bm@c0000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc0000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -291,6 +299,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts new file mode 100644 index 000000000000..f823ed382ac7 --- /dev/null +++ b/arch/arm/boot/dts/artpec6-devboard.dts @@ -0,0 +1,64 @@ +/* + * Axis ARTPEC-6 development board. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "artpec6.dtsi" + +/ { + model = "ARTPEC-6 development board"; + compatible = "axis,artpec6-dev-board", "axis,artpec6"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +ðernet { + status = "okay"; + + phy-handle = <&phy1>; + phy-mode = "gmii"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi new file mode 100644 index 000000000000..30430162b886 --- /dev/null +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -0,0 +1,270 @@ +/* + * Device Tree Source for the Axis ARTPEC-6 SoC + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "axis,artpec6"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&pl310>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&pl310>; + }; + }; + + syscon { + compatible = "axis,artpec6-syscon", "syscon"; + reg = <0xf8000000 0x48>; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + psci_version = <0x84000000>; + cpu_on = <0x84000003>; + system_reset = <0x84000009>; + }; + + scu@faf00000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfaf00000 0x58>; + }; + + /* Main external clock driving CPU and peripherals */ + ext_clk: ext_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + /* PLL1 is used by CPU and some peripherals */ + pll1_clk: pll1_clk@f8000000 { + #clock-cells = <0>; + compatible = "axis,artpec6-pll1-clock"; + reg = <0xf8000000 4>; + clocks = <&ext_clk>; + }; + + cpu_clk: cpu_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&pll1_clk>; + clock-output-names = "cpu_clk"; + }; + + cpu_clkdiv2: cpu_clkdiv2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&cpu_clk>; + }; + + cpu_clkdiv4: cpu_clkdiv4 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&cpu_clk>; + }; + + apb_pclk: apb_pclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&cpu_clk>; + clock-output-names = "apb_pclk"; + }; + + /* PLL2 is used by a number of peripherals, including UDL */ + pll2: pll2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <24>; + clocks = <&ext_clk>; + }; + + /* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */ + pll2div2: pll2div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll2>; + }; + + pll2div12: pll2div12 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <12>; + clock-mult = <1>; + clocks = <&pll2>; + }; + + pll2div24: pll2div24 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&pll2>; + clock-output-names = "uart_clk"; + }; + + + gtimer@faf00200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xfaf00200 0x20>; + interrupts = <GIC_PPI 11 0xf01>; + clocks = <&cpu_clkdiv2>; + }; + + timer@faf00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xfaf00600 0x20>; + interrupts = <GIC_PPI 13 0xf04>; + clocks = <&cpu_clkdiv2>; + status = "disabled"; + }; + + intc: interrupt-controller@faf01000 { + interrupt-controller; + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >; + }; + + pl310: cache-controller@faf10000 { + compatible = "arm,pl310-cache"; + cache-unified; + cache-level = <2>; + reg = <0xfaf10000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <1 1 1>; + arm,filter-ranges = <0x0 0x80000000>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + }; + + amba@0 { + compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupt-parent = <&intc>; + ranges; + dma-ranges = <0x80000000 0x00000000 0x40000000>; + dma-coherent; + + ethernet: ethernet@f8010000 { + clock-names = "phy_ref_clk", "apb_pclk"; + clocks = <&ext_clk>, <&apb_pclk>; + compatible = "snps,dwc-qos-ethernet-4.10"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf8010000 0x4000>; + + snps,write-requests = <2>; + snps,read-requests = <16>; + snps,txpbl = <8>; + snps,rxpbl = <2>; + + status = "disabled"; + }; + + uart0: serial@f8036000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8036000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart1: serial@f8037000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8037000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart2: serial@f8038000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8038000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart3: serial@f8039000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8039000 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 77ddff036409..21c780fab761 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -46,6 +46,7 @@ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -71,11 +72,20 @@ ahb { usb0: gadget@00300000 { + atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; usb1: ohci@00400000 { num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ + &pioA 42 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; @@ -114,9 +124,15 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; }; pdmic@f8018000 { @@ -261,7 +277,29 @@ }; }; + adc: adc@fc030000 { + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default>; + status = "okay"; + }; + pinctrl@fc038000 { + /* + * There is no real pinmux for ADC, if the pin + * is not requested by another peripheral then + * the muxing is done when channel is enabled. + * Requesting pins for ADC is GPIO is + * encouraged to prevent conflicts and to + * disable bias in order to be in the same + * state when the pin is not muxed to the adc. + */ + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; @@ -286,6 +324,18 @@ bias-disable; }; + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PB9__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0__GPIO>, + <PIN_PB5__GPIO>, + <PIN_PB6__GPIO>; + bias-pull-up; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, @@ -300,6 +350,11 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PC9__GPIO>; + bias-disable; + }; + pinctrl_pdmic_default: pdmic_default { pinmux = <PIN_PB26__PDMIC_DAT>, <PIN_PB27__PDMIC_CLK>; @@ -365,7 +420,54 @@ <PIN_PB12__UTXD3>; bias-disable; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PB10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA31__GPIO>; + bias-disable; + }; + }; }; }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + bp1 { + label = "PB_USER"; + gpios = <&pioA 41 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + }; + + green { + label = "green"; + gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + }; + + blue { + label = "blue"; + gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 131614f28e75..569026e8f96c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -86,10 +86,12 @@ macb0: ethernet@f8020000 { phy-mode = "rmii"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; }; @@ -152,6 +154,10 @@ atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_macb0_phy_irq: macb0_phy_irq_0 { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 2d4a33100af6..4e98cda97403 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -160,8 +160,15 @@ }; macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; }; mmc1: mmc@fc000000 { @@ -193,6 +200,10 @@ pinctrl@fc06a000 { board { + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ca4ddf86817a..626c67d66626 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -215,7 +215,7 @@ }; panel: panel { - compatible = "qd,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40", "simple-panel"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index ea288f0a1d39..a9d6d593fc8a 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -107,7 +107,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi index 32bcd45ef22b..80b6ba4ca50c 100644 --- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -121,4 +121,13 @@ clocks { clocks = <&osc>; clock-output-names = "keypad", "adc/touch", "pwm"; }; + + audiopll: audiopll { + #clock-cells = <1>; + compatible = "brcm,cygnus-audiopll"; + reg = <0x180aeb00 0x68>; + clocks = <&osc>; + clock-output-names = "audiopll", "ch0_audio", + "ch1_audio", "ch2_audio"; + }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 10bdef557ba0..def9e783b5c6 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -45,14 +45,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -62,24 +62,19 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + mpcore { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; #size-cells = <1>; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0x0>; - }; - }; - a9pll: arm_clk@00000 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; @@ -169,6 +164,18 @@ #address-cells = <1>; #size-cells = <1>; + gpioa: gpio@0020 { + compatible = "brcm,nsp-gpio-a"; + reg = <0x0020 0x70>, + <0x3f1c4 0x1c>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <32>; + interrupt-controller; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + uart0: serial@0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; @@ -185,78 +192,6 @@ status = "disabled"; }; - pcie0: pcie@12000 { - compatible = "brcm,iproc-pcie"; - reg = <0x12000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie1: pcie@13000 { - compatible = "brcm,iproc-pcie"; - reg = <0x13000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie2: pcie@14000 { - compatible = "brcm,iproc-pcie"; - reg = <0x14000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; - - linux,pci-domain = <2>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; - - status = "disabled"; - }; - nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -271,6 +206,24 @@ brcm,nand-has-wp; }; + ccbtimer0: timer@34000 { + compatible = "arm,sp804"; + reg = <0x34000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804"; + reg = <0x35000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + i2c0: i2c@38000 { compatible = "brcm,iproc-i2c"; reg = <0x38000 0x50>; @@ -280,6 +233,14 @@ clock-frequency = <100000>; }; + watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "wdogclk", "apb_pclk"; + }; + lcpll0: lcpll0@3f100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; @@ -306,4 +267,76 @@ <0x3f408 0x04>; }; }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie2: pcie@18014000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18014000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts new file mode 100644 index 000000000000..ddbbbbd42dda --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -0,0 +1,24 @@ +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-a", "brcm,bcm2835"; + model = "Raspberry Pi Model A"; + + leds { + act { + gpios = <&gpio 16 1>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 3afb9fefe2d1..76bdbcafab18 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/power/raspberrypi-power.h> + / { memory { reg = <0 0x10000000>; @@ -18,6 +20,12 @@ compatible = "raspberrypi,bcm2835-firmware"; mboxes = <&mailbox>; }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; }; }; @@ -58,3 +66,11 @@ status = "okay"; bus-width = <4>; }; + +&pwm { + status = "okay"; +}; + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 971e741e5467..8aaf193711bf 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/pinctrl/bcm2835.h> #include <dt-bindings/clock/bcm2835.h> +#include <dt-bindings/clock/bcm2835-aux.h> #include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between @@ -111,7 +112,7 @@ #interrupt-cells = <2>; }; - uart0: uart@7e201000 { + uart0: serial@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; @@ -159,6 +160,44 @@ clocks = <&clocks BCM2835_CLOCK_VPU>; }; + uart1: serial@7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + status = "disabled"; + }; + + spi1: spi@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@7e2150c0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150c0 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@7e20c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c000 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + sdhci: sdhci@7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; @@ -187,7 +226,7 @@ status = "disabled"; }; - usb@7e980000 { + usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts new file mode 100644 index 000000000000..6c83538bc2d7 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -0,0 +1,111 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for D-Link DIR-885L + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; + model = "D-Link DIR-885L"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + nand: nand@18028000 { + nandcs@0 { + partition@0 { + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Switch: router / extender */ + extender { + label = "Extender"; + linux,code = <BTN_0>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; + clock-frequency = <125000000>; +}; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 4e42f30cb318..c0451051777e 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -55,6 +55,7 @@ MATRIX_KEY(0x03, 0x04, KEY_F5) MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x09, KEY_F13) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index e070862b1038..cbc17b0794b1 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dm814x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DM8148 EVM"; @@ -35,6 +36,63 @@ phy-mode = "rgmii"; }; +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16aadwp"; + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index 26001585673a..e0ea6a93a22e 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -41,11 +41,11 @@ reg = <0x0040>; }; - /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ + /* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */ auxosc_ck: auxosc_ck { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <27000000>; + clock-frequency = <22572900>; }; /* Optional 32768Hz crystal or clock on RTCOSC pins */ diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index a25cd51e39ab..4a6ce8c8bf8f 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -305,6 +305,13 @@ reg = <0x60000 0x1000>; }; + rtc: rtc@c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0xc0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + mmc2: mmc@1d8000 { compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc2"; @@ -548,6 +555,20 @@ reg-names = "gmii-sel"; }; }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + ti,no-idle-on-init; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 169a85578fc9..f50348bdd857 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dm816x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DM8168 EVM"; @@ -85,8 +86,12 @@ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; linux,mtd-name= "micron,mt29f2g16aadwp"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; @@ -106,12 +111,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; partition@0 { diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index c3b8811a3e58..d9309a016117 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -183,6 +183,8 @@ dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; i2c1: i2c@48028000 { @@ -214,6 +216,13 @@ reg = <0x48200000 0x1000>; }; + rtc: rtc@480c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0x480c0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480c8000 0x2000>; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 79008069020d..f820573f4a4a 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dra62x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DRA62x J5 Eco EVM"; @@ -35,6 +36,63 @@ phy-mode = "rgmii"; }; +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16aadwp"; + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi new file mode 100644 index 000000000000..1c39a8459b39 --- /dev/null +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC DSPEVE thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +dspeve_thermal: dspeve_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 3>; + + trips { + dspeve_crit: dspeve_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index cfc24e52244e..d9b87236019d 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -18,7 +18,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x60000000>; /* 1536 MB */ + reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; evm_3v3_sd: fixedregulator-sd { @@ -741,9 +741,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x16>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -766,7 +770,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi new file mode 100644 index 000000000000..dd74a5337d1f --- /dev/null +++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC IVA thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +iva_thermal: iva_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 4>; + + trips { + iva_crit: iva_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c4d9175b90dc..13ac88279427 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -15,8 +15,8 @@ #define MAX_SOURCES 400 / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; @@ -57,10 +57,10 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>, - <0x48214000 0x2000>, - <0x48216000 0x2000>; + reg = <0x0 0x48211000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48214000 0x0 0x2000>, + <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-parent = <&gic>; }; @@ -69,7 +69,7 @@ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; + reg = <0x0 0x48281000 0x0 0x1000>; interrupt-parent = <&gic>; }; @@ -96,10 +96,10 @@ compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0xc0000000>; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x1000000>, - <0x45000000 0x1000>; + reg = <0x0 0x44000000 0x0 0x1000000>, + <0x0 0x45000000 0x0 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -156,6 +156,11 @@ compatible = "syscon"; reg = <0x1c04 0x0020>; }; + + scm_conf_pcie: scm_conf@1c24 { + compatible = "syscon"; + reg = <0x1c24 0x0024>; + }; }; cm_core_aon: cm_core_aon@5000 { @@ -1168,14 +1173,6 @@ status = "disabled"; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -1190,7 +1187,7 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; syscon-pllreset = <&scm_conf 0x3fc>; @@ -1202,16 +1199,18 @@ reg = <0x4a094000 0x80>, /* phy_rx */ <0x4a094400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie1phy>; + syscon-phy-power = <&scm_conf_pcie 0x1c>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy1_32khz>, <&optfclk_pciephy1_clk>, <&optfclk_pciephy1_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; }; @@ -1220,16 +1219,18 @@ reg = <0x4a095000 0x80>, /* phy_rx */ <0x4a095400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie2phy>; + syscon-phy-power = <&scm_conf_pcie 0x20>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy2_32khz>, <&optfclk_pciephy2_clk>, <&optfclk_pciephy2_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; status = "disabled"; }; @@ -1245,23 +1246,6 @@ ti,hwmods = "sata"; }; - omap_control_pcie1phy: control-phy@0x4a003c40 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - - omap_control_pcie2phy: control-pcie@0x4a003c44 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - status = "disabled"; - }; - rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; @@ -1271,24 +1255,6 @@ clocks = <&sys_32k_ck>; }; - omap_control_usb2phy1: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy1: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - - omap_control_usb2phy2: control-phy@0x4a002e74 { - compatible = "ti,control-phy-usb2-dra7"; - reg = <0x4a002e74 0x4>; - reg-names = "power"; - }; - /* OCP2SCP1 */ ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; @@ -1301,7 +1267,7 @@ usb2_phy1: phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x400>; - ctrl-module = <&omap_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", @@ -1310,9 +1276,10 @@ }; usb2_phy2: phy@4a085000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2-phy2", + "ti,omap-usb2"; reg = <0x4a085000 0x400>; - ctrl-module = <&omap_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&usb_otg_ss2_refclk960m>; clock-names = "wkupclk", @@ -1326,7 +1293,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy1>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&usb_otg_ss1_refclk960m>; @@ -1357,7 +1324,6 @@ "otg"; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1385,7 +1351,6 @@ "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1413,7 +1378,6 @@ interrupt-names = "peripheral", "host", "otg"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1438,6 +1402,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; @@ -1500,6 +1466,16 @@ 0x48485200 0x2E00>; #address-cells = <1>; #size-cells = <1>; + + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + /* * rx_thresh_pend * rx_pend @@ -1603,6 +1579,8 @@ #include "omap4-cpu-thermal.dtsi" #include "omap5-gpu-thermal.dtsi" #include "omap5-core-thermal.dtsi" + #include "dra7-dspeve-thermal.dtsi" + #include "dra7-iva-thermal.dtsi" }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 00b12002c07c..6affe2d137da 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -17,7 +17,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1024 MB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; aliases { @@ -492,13 +492,17 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_default>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: * SW5.1 (NAND_SELn) = ON (LOW) * SW5.9 (GPMC_WPN) = OFF (HIGH) */ + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -521,7 +525,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8bcc47db1cd1..4220eeffc65a 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -76,7 +76,6 @@ interrupt-names = "peripheral", "host", "otg"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 357bedeebfac..d0bae06b7eb7 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -2146,4 +2146,28 @@ ti,bit-shift = <0>; reg = <0x558>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <20>; + reg = <0x0558>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <21>; + reg = <0x0558>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <22>; + reg = <0x0558>; + }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 57795da616cb..bcce6f50c93d 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -9,6 +9,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -53,8 +54,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; clocks@e0110000 { @@ -158,7 +159,7 @@ timer@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sti_sclk>; clock-names = "sclk"; }; @@ -166,7 +167,7 @@ uart0: serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usia_u0_sclk>; clock-names = "sclk"; }; @@ -174,7 +175,7 @@ uart1: serial@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u1_sclk>; clock-names = "sclk"; }; @@ -182,7 +183,7 @@ uart2: serial@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u2_sclk>; clock-names = "sclk"; }; @@ -190,7 +191,7 @@ uart3: serial@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u3_sclk>; clock-names = "sclk"; }; @@ -203,8 +204,8 @@ gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, - <0 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; #gpio-cells = <2>; @@ -215,8 +216,8 @@ gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; #gpio-cells = <2>; @@ -227,8 +228,8 @@ gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; - interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, - <0 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; #gpio-cells = <2>; @@ -239,8 +240,8 @@ gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, - <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; #gpio-cells = <2>; @@ -251,8 +252,8 @@ gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, - <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 128 31>; #gpio-cells = <2>; @@ -266,7 +267,7 @@ #size-cells = <0>; compatible = "renesas,iic-emev2"; reg = <0xe0070000 0x28>; - interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; clocks = <&iic0_sclk>; clock-names = "sclk"; status = "disabled"; @@ -277,7 +278,7 @@ #size-cells = <0>; compatible = "renesas,iic-emev2"; reg = <0xe10a0000 0x28>; - interrupts = <0 33 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>; clocks = <&iic1_sclk>; clock-names = "sclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi new file mode 100644 index 000000000000..09a2040054ed --- /dev/null +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi @@ -0,0 +1,27 @@ +/* + * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + soc { + compatible = "simple-bus"; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 443a35085846..9e2840b59ae8 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -43,7 +43,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -67,7 +67,7 @@ interrupt-parent = <&gpx1>; interrupts = <5 0>; reg = <0x25>; - wakeup; + wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; @@ -185,7 +185,7 @@ interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x66>; - wakeup; + wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 3e64d5dcdd60..1f102f3a1ab1 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -43,7 +43,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -58,7 +58,7 @@ interrupt-parent = <&gpx1>; interrupts = <5 0>; reg = <0x25>; - wakeup; + wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; @@ -246,7 +246,7 @@ interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x66>; - wakeup; + wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 18e3deffbf48..137f9015d4e8 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -19,6 +19,7 @@ #include "skeleton.dtsi" #include "exynos4-cpu-thermal.dtsi" +#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -152,20 +153,6 @@ interrupt-parent = <&gic>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* Reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; @@ -381,7 +368,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 045785c44c04..c679b3cc3c48 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -22,6 +22,7 @@ #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/clock/exynos-audss-clk.h> #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -76,6 +77,11 @@ reg = <0x10000000 0x100>; }; + sromc@12570000 { + compatible = "samsung,exynos-srom"; + reg = <0x12570000 0x14>; + }; + mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; @@ -158,20 +164,6 @@ interrupt-parent = <&gic>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -661,7 +653,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 5821ad87e32c..ad7394c1d67a 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -60,35 +60,35 @@ label = "Up"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; down { label = "Down"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; back { label = "Back"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; - gpio-key,wakeup; + wakeup-source; }; home { label = "Home"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; - gpio-key,wakeup; + wakeup-source; }; menu { label = "Menu"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 104cbb33d2bb..94ca7d36ab37 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -66,7 +66,7 @@ samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a50be640f1b0..1df2f0bc1d76 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -112,7 +112,7 @@ linux,code = <116>; label = "power"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; ok-key { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 4f5d37920c8d..9a75e3effbc9 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -92,7 +92,7 @@ linux,code = <171>; label = "config"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; camera-key { @@ -107,7 +107,7 @@ linux,code = <116>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; ok-key { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 395c3ca9601e..5e5d3fecb04c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -35,7 +35,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index b44bb682e976..bf7b21b817e4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -48,7 +48,7 @@ linux,code = <KEY_HOME>; label = "home key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 9e2e24c6177a..8bca699b7f20 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -423,7 +423,7 @@ samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <2>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a130ab39fa77..a51069f3c03b 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -45,7 +45,7 @@ samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index a6f78c3da935..ed017cc7b14f 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -119,7 +119,7 @@ linux,code = <116>; label = "power"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; key-ok { @@ -127,7 +127,7 @@ linux,code = <139>; label = "ok"; debounce-inteval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index ad764842fff5..28b04b6795c9 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -380,7 +380,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index e2439e87ee4a..92313cac035e 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -14,6 +14,7 @@ */ #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -30,6 +31,11 @@ reg = <0x10000000 0x100>; }; + sromc@12250000 { + compatible = "samsung,exynos-srom"; + reg = <0x12250000 0x14>; + }; + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; @@ -88,20 +94,6 @@ status = "disabled"; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index c000532c1444..8b2acc74aa76 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -34,42 +34,42 @@ label = "SW-TACT2"; gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; - gpio-key,wakeup; + wakeup-source; }; home { label = "SW-TACT3"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; - gpio-key,wakeup; + wakeup-source; }; up { label = "SW-TACT4"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; down { label = "SW-TACT5"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; back { label = "SW-TACT6"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; - gpio-key,wakeup; + wakeup-source; }; wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 5cb33ba5e296..95210ef6a6b5 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -37,7 +37,7 @@ label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -46,7 +46,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index c1edd6d038a9..0f500cb1eb2d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -37,7 +37,7 @@ label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -46,7 +46,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 33e2d5f7315b..e653ae04015a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -674,7 +674,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; @@ -807,7 +807,7 @@ sss@10830000 { compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x10000>; + reg = <0x10830000 0x300>; interrupts = <0 112 0>; clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi new file mode 100644 index 000000000000..f9aa6bb55464 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -0,0 +1,406 @@ +/* + * Exynos5410 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Hardkernel Co., Ltd. + * http://www.hardkernel.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm5: gpm5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm7: gpm7 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, + <24 0>, + <25 0>, + <25 1>, + <26 0>, + <26 1>, + <27 0>, + <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, + <28 1>, + <29 0>, + <29 1>, + <30 0>, + <30 1>, + <31 0>, + <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_1 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_2 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_3 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index cebeaab3abec..a731fbe28ebc 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5410.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung SMDK5410 board based on EXYNOS5410"; compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; @@ -61,6 +62,46 @@ disable-wp; }; +&pinctrl_0 { + srom_ctl: srom-ctl { + samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", + "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; + samsung,pin-function = <2>; + samsung,pin-drv = <0>; + }; + + srom_ebi: srom-ebi { + samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", + "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", + "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", + "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", + "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", + "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&sromc { + pinctrl-names = "default"; + pinctrl-0 = <&srom_ctl>, <&srom_ebi>; + + ethernet@3,0 { + compatible = "smsc,lan9115"; + reg = <3 0 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpx0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reg-io-width = <2>; + smsc,irq-push-pull; + smsc,force-internal-phy; + + samsung,srom-page-mode = <1>; + samsung,srom-timing = <9 12 1 9 1 1>; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index fad0779b1b6e..fa558674ac76 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -14,6 +14,7 @@ */ #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> / { @@ -21,6 +22,10 @@ interrupt-parent = <&gic>; aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -97,25 +102,22 @@ reg = <0x10000000 0x100>; }; + sromc: sromc@12250000 { + compatible = "samsung,exynos-srom"; + reg = <0x12250000 0x14>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 + 1 0 0x05000000 0x20000 + 2 0 0x06000000 0x20000 + 3 0 0x07000000 0x20000>; + }; + pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5410-pmu", "syscon"; reg = <0x10040000 0x5000>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; @@ -205,6 +207,36 @@ status = "disabled"; }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@14000000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; @@ -233,3 +265,5 @@ }; }; }; + +#include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 4ecef6981d5c..a103ce8c3985 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> @@ -47,11 +48,19 @@ label = "SW-TACT1"; gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; - gpio-key,wakeup; + wakeup-source; }; }; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &usbdrd_dwc3_1 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi new file mode 100644 index 000000000000..5c052d7ff554 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -0,0 +1,126 @@ +/* + * SAMSUNG EXYNOS5420 SoC cpu device tree source + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This file provides desired ordering for Exynos5420 and Exynos5800 + * boards: CPU[0123] being the A15. + * + * The Exynos5420, 5422 and 5800 actually share the same CPU configuration + * but particular boards choose different booting order. + * + * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 + * booting cluster (big or LITTLE) is chosen by IROM code by reading + * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting + * from the LITTLE: Cortex-A7. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 35cfb07dc4bb..3981ddb25036 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -64,7 +65,7 @@ label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -73,7 +74,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -143,6 +144,14 @@ vdd-supply = <&ldo9_reg>; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index ac35aefd320f..0785fedf441e 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -89,6 +90,14 @@ }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 48a0a55314f5..7b99cb58d82d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -50,75 +50,121 @@ usbdrdphy1 = &usbdrd_phy1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; }; - - cpu4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; }; - - cpu5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; }; - - cpu6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; + }; + }; - cpu7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; }; }; + /* + * The 'cpus' node is not present here but instead it is provided + * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. + */ + cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; @@ -252,8 +298,10 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; - clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; - clock-names = "asb0", "asb1"; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK300_GSCL>, + <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "oscclk", "clk0", "asb0", "asb1"; }; isp_pd: power-domain@10044020 { @@ -327,7 +375,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; @@ -859,7 +907,7 @@ sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x10000>; + reg = <0x10830000 0x300>; interrupts = <0 112 0>; clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi index 2b289d7c0d13..3e4c4ad96d63 100644 --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi @@ -16,7 +16,7 @@ thermal-zones { cpu0_thermal: cpu0-thermal { thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; trips { cpu_alert0: cpu-alert-0 { @@ -39,6 +39,23 @@ hysteresis = <0>; /* millicelsius */ type = "critical"; }; + /* + * Exyunos542x support only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + }; cooling-maps { map0 { @@ -53,6 +70,33 @@ trip = <&cpu_alert2>; cooling-device = <&fan0 2 3>; }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1500 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index b7f60c855459..bf3c6f1ec4ee 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -4,78 +4,122 @@ * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The - * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting - * from Cortex-A15 core. + * This file provides desired ordering for Exynos5422: CPU[0123] being the A7. * - * EXYNOS5422 based board files can include this file to provide cpu ordering - * which could boot a cortex-a7 from cpu0. + * The Exynos5420, 5422 and 5800 actually share the same CPU configuration + * but particular boards choose different booting order. + * + * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 + * booting cluster (big or LITTLE) is chosen by IROM code by reading + * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting + * from the LITTLE: Cortex-A7. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&cpu0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; -&cpu1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu4 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu5 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + clocks = <&clock CLK_ARM_CLK>; + reg = <0x0>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu6 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu7 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + cpu7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 9134217446b8..1bd507bfa750 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -67,6 +67,14 @@ <19200000>; }; +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + &hdmi { status = "okay"; hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f18b51f2eeaa..b9342ec5b9cf 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -200,7 +200,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 064176f201e7..6e9edc1610c4 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" +#include "exynos5420-cpus.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -63,7 +64,7 @@ label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -72,7 +73,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -143,6 +144,14 @@ vdd-supply = <&ldo9_reg>; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index c0bb3563cac1..8213016803e5 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -23,6 +23,114 @@ compatible = "samsung,exynos5800-clock"; }; +&cluster_a15_opp_table { + opp@1700000000 { + opp-microvolt = <1250000>; + }; + opp@1600000000 { + opp-microvolt = <1250000>; + }; + opp@1500000000 { + opp-microvolt = <1100000>; + }; + opp@1400000000 { + opp-microvolt = <1100000>; + }; + opp@1300000000 { + opp-microvolt = <1100000>; + }; + opp@1200000000 { + opp-microvolt = <1000000>; + }; + opp@1100000000 { + opp-microvolt = <1000000>; + }; + opp@1000000000 { + opp-microvolt = <1000000>; + }; + opp@900000000 { + opp-microvolt = <1000000>; + }; + opp@800000000 { + opp-microvolt = <900000>; + }; + opp@700000000 { + opp-microvolt = <900000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; +}; + +&cluster_a7_opp_table { + opp@1300000000 { + opp-microvolt = <1250000>; + }; + opp@1200000000 { + opp-microvolt = <1250000>; + }; + opp@1100000000 { + opp-microvolt = <1250000>; + }; + opp@1000000000 { + opp-microvolt = <1100000>; + }; + opp@900000000 { + opp-microvolt = <1100000>; + }; + opp@800000000 { + opp-microvolt = <1100000>; + }; + opp@700000000 { + opp-microvolt = <1000000>; + }; + opp@600000000 { + opp-microvolt = <1000000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; +}; + &mfc { compatible = "samsung,mfc-v8"; }; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 6cbb62e5c6a9..c85d07e6db61 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges = <0 0xfc000000 0x2000000>; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 33130f8461c3..4e9562f806a2 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -43,7 +43,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; uart0: uart@10001000 { diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index c52722b14e4a..fdcc23d203e5 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -34,7 +34,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; timer0: timer@00002000 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 1c6c07538a78..302d1168f424 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -569,7 +569,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index fae7b9069fc4..f637ec900cc8 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1256,7 +1256,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4f6ae921656f..f74d3db4846d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -896,7 +896,6 @@ #size-cells = <1>; reg = <0x2100000 0x10000>; ranges = <0 0x2100000 0x10000>; - interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, <&clks IMX6QDL_CLK_CAAM_ACLK>, <&clks IMX6QDL_CLK_CAAM_IPG>, diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 3807d4f46ef7..b82f0e6d9a63 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -57,7 +57,7 @@ }; fpga { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts new file mode 100644 index 000000000000..5bfd9e7845f2 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -0,0 +1,32 @@ +/* + * Device Tree Source for K2G EVM + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; + +#include "keystone-k2g.dtsi" + +/ { + compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; + model = "Texas Instruments K2G General Purpose EVM"; + + memory { + device_type = "memory"; + reg = <0x00000008 0x00000000 0x00000000 0x80000000>; + }; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi new file mode 100644 index 000000000000..7ff2796ae925 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -0,0 +1,89 @@ +/* + * Device Tree Source for K2G SOC + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "ti,k2g","ti,keystone"; + model = "Texas Instruments K2G SoC"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + }; + + gic: interrupt-controller@02561000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x02561000 0x0 0x1000>, + <0x0 0x02562000 0x0 0x2000>, + <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02566000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,keystone","simple-bus"; + ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + + uart0: serial@02530c00 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02530c00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clock-frequency = <200000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index bf4143c6cb8f..b84af3da8c84 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -14,7 +14,7 @@ #include "kirkwood-synology.dtsi" / { - model = "Synology DS111"; + model = "Synology DS112"; compatible = "synology,ds111", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi new file mode 100644 index 000000000000..6548e68a20d0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -0,0 +1,192 @@ +/* + * Device Tree common file for kirkwood-6282 based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 17 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + regulators { + usb_power: regulator@1 { + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi new file mode 100644 index 000000000000..cf2e69f0d54f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -0,0 +1,186 @@ +/* + * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + usb_power: regulator@1 { + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts new file mode 100644 index 000000000000..6dc0df2969f0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -0,0 +1,135 @@ +/* + * Device Tree file for Buffalo Linkstation LS-QVL + * + * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net> + * + * Based on kirkwood-linkstation-lswvl.dts, + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-QVL"; + compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_hdderr2: pmx-led-hdderr2 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_hdderr3: pmx-led-hdderr3 { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1 + &pmx_led_hdderr2 + &pmx_led_hdderr3>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + }; + + red-hdderr2-led { + label = "linkstation:red:hdderr2"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + red-hdderr3-led { + label = "linkstation:red:hdderr3"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts new file mode 100644 index 000000000000..edcba5c44b05 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-VL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-VL"; + compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts new file mode 100644 index 000000000000..4b6450186af5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WSXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WSXL"; + compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts new file mode 100644 index 000000000000..954ec1d5b6dc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -0,0 +1,112 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WVL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-WVL"; + compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts new file mode 100644 index 000000000000..ecd5c12a805d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -0,0 +1,116 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WXL"; + compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi new file mode 100644 index 000000000000..69061b6e987b --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -0,0 +1,202 @@ +/* + * Device Tree common file for kirkwood based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p40", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + + function-button { + label = "Function Button"; + linux,code = <KEY_OPTION>; + }; + + power-on-switch { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue>; + pinctrl-names = "default"; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts deleted file mode 100644 index 09eed3cea0af..000000000000 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-WVL/VL - * - * Copyright (C) 2015, rogershimizu@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Buffalo Linkstation LS-WVL/VL"; - compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { /* 256 MB */ - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; - }; - - button@3 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; - pinctrl-names = "default"; - - led@1 { - label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; - }; - - led@2 { - label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; - }; - - led@3 { - label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; - }; - - led@4 { - label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; - }; - - led@5 { - label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led@6 { - label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; - }; - - led@7 { - label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio0 17 GPIO_ACTIVE_LOW - &gpio0 16 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - hdd_power0: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts deleted file mode 100644 index f5db16a08597..000000000000 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-WXL/WSXL - * - * Copyright (C) 2015, rogershimizu@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Buffalo Linkstation LS-WXL/WSXL"; - compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; - }; - - button@3 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; - pinctrl-names = "default"; - - led@1 { - label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; - }; - - led@2 { - label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; - }; - - led@3 { - label = "lswxl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - led@4 { - label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - led@5 { - label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led@6 { - label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - led@7 { - label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; - }; - hdd_power0: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy1: ethernet-phy@8 { - device_type = "ethernet-phy"; - reg = <8>; - }; -}; - -ð1 { - status = "okay"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts index 887b9c1fee43..96ff59d68f44 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -20,6 +20,9 @@ compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ocp@f1000000 { + audio-controller@a0000 { + status = "okay"; + }; i2c@11000 { status = "okay"; clock-frequency = <400000>; @@ -27,6 +30,7 @@ cs42l51: cs42l51@4a { compatible = "cirrus,cs42l51"; reg = <0x4a>; + #sound-dai-cells = <0>; }; }; }; @@ -37,7 +41,7 @@ simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { - sound-dai = <&audio0>; + sound-dai = <&audio0 0>; }; simple-audio-card,codec { diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index d3330dadf7ed..24f1d30970a0 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -40,7 +40,7 @@ pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; pinctrl-names = "default"; - pmx_select28: pmx-select-uart-sd { + pmx_select28: pmx-select-rs232-rs485 { marvell,pins = "mpp28"; marvell,function = "gpio"; }; @@ -48,7 +48,7 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; - pmx_select34: pmx-select-rs232-rs484 { + pmx_select34: pmx-select-uart-sd { marvell,pins = "mpp34"; marvell,function = "gpio"; }; @@ -65,6 +65,43 @@ status = "okay"; cd-gpios = <&gpio0 29 9>; }; + gpio@10100 { + p28 { + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + /* + * SelRS232or485 selects between RS-232 or RS-485 + * mode for the second UART. + * + * Low: RS-232 + * High: RS-485 + * + * To use the second UART, you need to change also + * the SelUARTorSD. + */ + output-low; + line-name = "SelRS232or485"; + }; + }; + gpio@10140 { + p2 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + /* + * SelUARTorSD selects between the second UART + * (serial@12100) and SD (mvsdio@90000). + * + * Low: UART + * High: SD + * + * When changing this line make sure the newly + * selected device node is enabled and the + * previously selected device node is disabled. + */ + output-high; /* Select SD by default */ + line-name = "SelUARTorSD"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 1db6f2c506cc..8082d64266a3 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -131,6 +131,7 @@ chip-delay = <40>; status = "okay"; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7b5a4a18f49c..7445a15e259d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -381,7 +381,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts new file mode 100644 index 000000000000..da8598402ab8 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -0,0 +1,268 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "logicpd-som-lv.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + sysboot2 { + label = "gpio3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* gpio_111 / uP_GPIO_3 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3logic"; + ti,mcbsp = <&mcbsp2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &led_pins_wkup>; + + led1 { + label = "led1"; + gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* gpio133 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* gpio11 */ + linux,default-trigger = "none"; + }; + }; +}; + +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcbsp2 { + status = "okay"; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; /* gpio_152 */ + reg = <1 0 0xff>; + }; +}; + +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins1>; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + video_reg: video_reg { + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "28"; + status = "okay"; + /* default-on; */ + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_pin>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&twl_pwm 0 5000000>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */ + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ + cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + >; + }; + + lcd_enable_pin: pinmux_lcd_enable_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + >; + }; +}; + +&omap3_pmx_wkup { + led_pins_wkup: pinmux_led_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ + >; + }; + + mmc1_cd: pinmux_mmc1_cd { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ + >; + }; +}; + + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi new file mode 100644 index 000000000000..365f39ff58bb --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -0,0 +1,265 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 3 0>; /* gpio_3 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name = "micron,mt29f4g16abbda3w"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + gpmc,page-burst-access-ns = <5>; + gpmc,cycle2cycle-delay-ns = <50>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ + + x-loader@0 { + label = "x-loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "u-boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "u-boot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "fs"; + reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc3 { + interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + pinctrl-0 = <&mmc3_pins>; + pinctrl-names = "default"; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1273"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + ref-clock-frequency = <26000000>; + }; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; + + mmc3_pins: pinmux_mm3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ + >; + }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ + >; + }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + hsusb_otg_pins: pinmux_hsusb_otg_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + >; + }; + + +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index fb13f18c08cc..015f795a8d19 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -11,7 +11,7 @@ #include "omap-gpmc-smsc9221.dtsi" / { - model = "LogicPD Zoom DM3730 Torpedo Development Kit"; + model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; gpio_keys { @@ -71,6 +71,15 @@ linux,default-trigger = "none"; }; }; + + pwm10: dmtimer-pwm@10 { + compatible = "ti,omap-dmtimer-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + ti,timers = <&timer10>; + #pwm-cells = <3>; + }; + }; &vaux1 { @@ -93,7 +102,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; @@ -111,6 +121,7 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { @@ -126,13 +137,22 @@ display0 = &lcd0; }; + video_reg: video_reg { + pinctrl-names = "default"; + pinctrl-0 = <&panel_pwr_pins>; + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + }; + lcd0: display@0 { compatible = "panel-dpi"; label = "15"; status = "okay"; /* default-on; */ pinctrl-names = "default"; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ port { lcd_in: endpoint { @@ -158,13 +178,13 @@ }; bl: backlight { - compatible = "gpio-backlight"; + compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&backlight_pins>; - - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>, /* gpio_56 */ - <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ - default-on; + pwms = <&pwm10 0 5000000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ }; }; @@ -186,6 +206,12 @@ >; }; + pwm_pins: pinmux_pwm_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ + >; + }; + led_pins: pinmux_led_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ @@ -212,37 +238,60 @@ backlight_pins: pinmux_backlight_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */ - OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + >; + }; + + isp_pins: pinmux_isp_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ + + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ + >; + }; + + panel_pwr_pins: pinmux_panel_pwr_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ >; }; dss_dpi_pins1: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ >; }; }; @@ -268,6 +317,24 @@ }; }; +&i2c2 { + mt9p031@48 { + compatible = "aptina,mt9p031"; + reg = <0x48>; + clocks = <&isp 0>; + vaa-supply = <&vaux4>; + vdd-supply = <&vaux4>; + vdd_io-supply = <&vaux4>; + port { + mt9p031_out: endpoint { + input-clock-frequency = <24000000>; + pixel-clock-frequency = <72000000>; + remote-endpoint = <&ccdc_ep>; + }; + }; + }; +}; + &i2c3 { touchscreen: tsc2004@48 { compatible = "ti,tsc2004"; @@ -289,12 +356,45 @@ }; }; +&mcspi1 { + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; +}; + +&isp { + pinctrl-names = "default"; + pinctrl-0 = <&isp_pins>; + ports { + port@0 { + reg = <0>; + ccdc_ep: endpoint { + remote-endpoint = <&mt9p031_out>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + &uart1 { interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; }; /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ &usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; interface-type = <0>; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 7fed0bd4f3de..5e9a13c0eaf7 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -35,11 +35,15 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; @@ -110,14 +114,11 @@ &i2c3 { clock-frequency = <400000>; -}; - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; + at24@50 { + compatible = "at24,24c02"; + readonly; + reg = <0x50>; + }; }; /* @@ -143,6 +144,7 @@ interrupt-parent = <&gpio5>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; }; }; @@ -174,6 +176,31 @@ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + hsusb_otg_pins: pinmux_hsusb_otg_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + >; + }; }; &uart2 { @@ -182,6 +209,11 @@ pinctrl-0 = <&uart2_pins>; }; +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + &omap3_pmx_core2 { mmc3_core2_pins: pinmux_mmc3_core2_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index c85cf979725e..c58d8da9ea2a 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -13,6 +13,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/lpc32xx-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -28,6 +31,22 @@ }; }; + clocks { + xtal_32k: xtal_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k"; + }; + + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "xtal"; + }; + }; + ahb { #address-cells = <1>; #size-cells = <1>; @@ -41,20 +60,24 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; + clocks = <&clk LPC32XX_CLK_SLC>; status = "disabled"; }; mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; reg = <0x200a8000 0x11000>; - interrupts = <11 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MLC>; status = "disabled"; }; dma: dma@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; - interrupts = <0x1c 0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_DMA>; + clock-names = "apb_pclk"; }; usb { @@ -69,43 +92,60 @@ ohci: ohci@0 { compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x0 0x300>; - interrupts = <0x3b 0>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; status = "disabled"; }; usbd: usbd@0 { compatible = "nxp,lpc3220-udc"; reg = <0x0 0x300>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>, + <62 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <58 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; status = "disabled"; }; i2cusb: i2c@300 { compatible = "nxp,pnx-i2c"; reg = <0x300 0x100>; - interrupts = <0x3f 0>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; }; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; }; clcd: clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; - interrupts = <0x0e 0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_LCD>; + clock-names = "apb_pclk"; status = "disabled"; }; mac: ethernet@31060000 { compatible = "nxp,lpc-eth"; reg = <0x31060000 0x1000>; - interrupts = <0x1d 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MAC>; }; emc: memory-controller@31080000 { compatible = "arm,pl175", "arm,primecell"; reg = <0x31080000 0x1000>; + clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>; + clock-names = "mpmcclk", "apb_pclk"; #address-cells = <1>; #size-cells = <1>; @@ -125,7 +165,9 @@ ssp0: ssp@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; - interrupts = <0x14 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP0>; + clock-names = "apb_pclk"; }; spi1: spi@20088000 { @@ -136,7 +178,9 @@ ssp1: ssp@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; - interrupts = <0x15 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP1>; + clock-names = "apb_pclk"; }; spi2: spi@20090000 { @@ -152,7 +196,10 @@ sd: sd@20098000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; - interrupts = <0x0f 0>, <0x0d 0>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SD>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -166,55 +213,57 @@ /* actually, ns16550a w/ 64 byte fifos! */ compatible = "nxp,lpc3220-uart"; reg = <0x40090000 0x1000>; - interrupts = <9 0>; - clock-frequency = <13000000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART5>; status = "disabled"; }; uart3: serial@40080000 { compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; - interrupts = <7 0>; - clock-frequency = <13000000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART3>; status = "disabled"; }; uart4: serial@40088000 { compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - interrupts = <8 0>; - clock-frequency = <13000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART4>; status = "disabled"; }; uart6: serial@40098000 { compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; - interrupts = <10 0>; - clock-frequency = <13000000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART6>; status = "disabled"; }; i2c1: i2c@400A0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; - interrupts = <0x33 0>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C1>; }; i2c2: i2c@400A8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; - interrupts = <0x32 0>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C2>; }; mpwm: mpwm@400E8000 { @@ -231,6 +280,23 @@ compatible = "simple-bus"; ranges = <0x20000000 0x20000000 0x30000000>; + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; + /* * MIC Interrupt controller includes: * MIC @40008000 @@ -247,28 +313,29 @@ uart1: serial@40014000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart2: serial@40018000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart7: serial@4001c000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x4001c000 0x1000>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; - interrupts = <0x34 0>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_RTC>; }; gpio: gpio@40028000 { @@ -281,26 +348,33 @@ timer4: timer@4002C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; - interrupts = <0x3 0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER4>; + clock-names = "timerclk"; status = "disabled"; }; timer5: timer@40030000 { compatible = "nxp,lpc3220-timer"; reg = <0x40030000 0x1000>; - interrupts = <0x4 0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER5>; + clock-names = "timerclk"; status = "disabled"; }; watchdog: watchdog@4003C000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; + clocks = <&clk LPC32XX_CLK_WDOG>; }; timer0: timer@40044000 { compatible = "nxp,lpc3220-timer"; reg = <0x40044000 0x1000>; - interrupts = <0x10 0>; + clocks = <&clk LPC32XX_CLK_TIMER0>; + clock-names = "timerclk"; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; }; /* @@ -313,53 +387,63 @@ adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; timer1: timer@4004C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; - interrupts = <0x11 0>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; }; key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 0>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; timer2: timer@40058000 { compatible = "nxp,lpc3220-timer"; reg = <0x40058000 0x1000>; - interrupts = <0x12 0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER2>; + clock-names = "timerclk"; status = "disabled"; }; pwm1: pwm@4005C000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; status = "disabled"; }; pwm2: pwm@4005C004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; status = "disabled"; }; timer3: timer@40060000 { compatible = "nxp,lpc3220-timer"; reg = <0x40060000 0x1000>; - interrupts = <0x13 0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER3>; + clock-names = "timerclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2c84ca236473..ecf12dc22595 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -457,6 +457,18 @@ reg = <0x0 0x2d24000 0x0 0x4000>; }; + ptp_clock@2d10e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x0 0x2d10e00 0x0 0xb0>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <499999999>; + }; + enet0: ethernet@2d10000 { compatible = "fsl,etsec2"; device_type = "network"; diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h new file mode 100644 index 000000000000..e24ebc8d928e --- /dev/null +++ b/arch/arm/boot/dts/mt2701-pinfunc.h @@ -0,0 +1,735 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Biao Huang <biao.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT2701_PINFUNC_H +#define __DTS_MT2701_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2) + +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2) + +#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1) + +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1) + +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1) + +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5) + +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7) + +#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1) +#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4) +#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7) + +#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2) +#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4) +#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7) + +#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2) +#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3) +#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4) +#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7) + +#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1) + +#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1) + +#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1) + +#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1) + +#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1) +#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2) +#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5) +#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7) + +#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1) +#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2) +#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7) + +#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1) +#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2) +#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4) +#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5) +#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6) +#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7) + +#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1) +#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2) +#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5) +#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6) +#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7) + +#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4) +#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5) +#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6) +#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7) + +#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4) +#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5) +#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6) +#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7) + +#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1) +#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3) +#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4) +#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5) +#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7) +#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10) + +#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1) +#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3) +#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4) +#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) +#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7) +#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10) + +#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1) +#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3) +#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4) +#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7) +#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10) + +#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1) +#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3) +#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4) +#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7) + +#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1) +#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2) +#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5) +#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6) +#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7) + +#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1) +#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2) +#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3) +#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4) +#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6) +#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7) + +#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1) +#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3) +#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4) +#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6) +#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7) + +#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1) +#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2) +#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5) +#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7) +#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14) + +#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2) +#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3) +#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4) +#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5) +#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6) +#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7) + +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7) + +#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1) +#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3) +#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5) +#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6) +#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7) + +#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7) + +#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7) + +#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3) +#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4) + +#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3) +#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4) + +#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1) +#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2) +#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4) + +#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1) +#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2) +#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4) + +#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1) +#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2) + +#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1) +#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2) + +#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1) +#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2) + +#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1) + +#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1) +#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2) + +#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1) +#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2) + +#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2) +#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3) +#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6) +#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7) + +#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3) +#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4) +#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5) +#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7) + +#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3) +#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4) +#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7) + +#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2) +#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3) +#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4) +#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5) +#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7) + +#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3) +#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7) + +#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1) + +#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1) + +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7) + +#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7) + +#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1) +#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3) +#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6) +#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7) + +#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1) + +#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1) + +#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1) + +#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1) + +#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1) +#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2) +#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5) + +#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1) +#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2) + +#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1) +#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2) + +#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1) +#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2) + +#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1) +#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2) +#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7) + +#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1) +#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7) + +#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0) +#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1) + +#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0) +#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1) + +#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0) +#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1) + +#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0) +#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1) + +#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0) +#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1) + +#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0) +#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1) + +#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0) +#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1) + +#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0) +#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1) + +#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0) +#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1) + +#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0) +#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1) + +#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3) +#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4) + +#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2) +#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3) +#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4) + +#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2) +#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3) +#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4) + +#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3) +#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4) + +#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7) + +#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7) + +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7) + +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7) + +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7) + +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7) + +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4) + +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4) + +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4) + +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4) + +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4) + +#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4) + +#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4) + +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4) + +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4) + +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4) + +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5) + +#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1) +#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4) +#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5) + +#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1) +#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4) +#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5) + +#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1) +#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4) +#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5) + +#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1) +#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4) +#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5) + +#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7) + +#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1) +#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3) +#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4) +#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7) + +#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7) + +#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7) + +#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1) + +#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0) +#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1) +#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2) +#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5) +#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7) +#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9) + +#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0) +#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1) +#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2) +#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5) +#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7) +#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9) + +#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0) +#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1) +#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2) +#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5) +#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7) + +#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0) +#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1) +#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2) +#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3) +#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5) +#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7) + +#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0) +#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1) +#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2) +#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3) +#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5) +#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7) + +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11) + +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11) + +#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7) + +#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2) + +#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2) + +#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2) + +#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0) +#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1) + +#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0) +#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1) + +#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0) +#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1) +#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2) +#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3) +#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4) +#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7) + +#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0) +#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1) +#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2) +#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3) +#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4) +#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7) + +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0) +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1) + +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0) +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1) + +#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0) + +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0) +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1) + +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0) +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1) + +#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9) + +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9) +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14) + +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9) +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14) + +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9) +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14) + +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9) +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14) + +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9) +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14) + +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9) +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14) + +#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9) + +#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9) + +#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9) + +#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9) + +#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9) + +#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0) +#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1) +#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7) + +#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0) +#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1) + +#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0) +#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1) +#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6) + +#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0) +#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1) +#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6) + +#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0) +#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1) +#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6) + +#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0) +#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1) +#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6) + +#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0) +#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1) + +#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0) +#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1) + +#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0) +#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1) + +#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0) +#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1) + +#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0) +#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1) + +#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0) +#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1) + +#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0) +#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1) + +#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0) +#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1) +#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6) + +#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0) +#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1) +#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6) + +#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0) +#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1) + +#endif /* __DTS_MT2701_PINFUNC_H */ diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 3766904b60f3..83437683aa60 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -23,6 +23,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu@0 { device_type = "cpu"; @@ -46,6 +47,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + system_clk: dummy13m { compatible = "fixed-clock"; clock-frequency = <13000000>; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts new file mode 100644 index 000000000000..a9ee2d64c6f7 --- /dev/null +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt7623.dtsi" + +/ { + model = "MediaTek MT7623 evaluation board"; + compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; + + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi new file mode 100644 index 000000000000..fd2b614ae6f3 --- /dev/null +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton64.dtsi" + +/ { + compatible = "mediatek,mt7623"; + interrupt-parent = <&sysirq>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt7623-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt7623-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x80>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt7623-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10212000 0 0x1000>, + <0 0x10214000 0 0x2000>, + <0 0x10216000 0 0x2000>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi new file mode 100644 index 000000000000..e211a3c47a76 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -0,0 +1,72 @@ +/* + * Device Tree common file for gpio-fan on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpio-fan,speed-map = + <0 3 + 1500 2 + 3250 1 + 5000 0>; + }; +}; + +&pinctrl { + pmx_fan_low: pmx-fan-low { + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi new file mode 100644 index 000000000000..68d75e79a360 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -0,0 +1,105 @@ +/* + * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_switch>; + pinctrl-names = "default"; + + power-on-switch { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>; + pinctrl-names = "default"; + + blue-power-led { + label = "linkstation:blue:power"; + default-state = "keep"; + }; + + red-alarm-led { + label = "linkstation:red:alarm"; + }; + + amber-info-led { + label = "linkstation:amber:info"; + }; + }; +}; + +&pinctrl { + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + + pmx_led_power: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8ba465d57635..4602866792be 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -384,8 +384,11 @@ /* Chip select 0 */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* NAND I/O window, 4 bytes */ - interrupts = <20>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "ham1"; nand-bus-width = <16>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e5f7f5c92c1a..a8127bc31fd9 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -261,10 +261,14 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; gpmc,device-width = <1>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 86850bb311eb..b1b8ebf90c1c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -204,7 +204,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index ac188657a95d..76056ba92ced 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -154,12 +154,16 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "hynix,h8kds0un0mer-4em"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 5e2d6433d939..ab9fb8f49ff3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -492,7 +492,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 3caf062f882c..41f5d386f21f 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -18,6 +18,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + chosen { + stdout-path = &uart3; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "igep2"; @@ -95,8 +99,12 @@ &gpmc { nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index d90f12c39307..d6f839cab649 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -210,8 +210,8 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>, - <5 0 0x2c000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */ + <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */ ethernet@gpmc { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 640f06603966..e94d9427450c 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -33,9 +33,28 @@ default-state = "off"; }; }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + }; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ @@ -47,6 +66,20 @@ }; &omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_core2_pins>; + + hsusb2_core2_pins: pinmux_hsusb2_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + leds_core2_pins: pinmux_leds_core2_pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ @@ -54,7 +87,19 @@ }; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; + +&gpmc { + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 540163025dd3..2f353dadfa40 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -97,12 +97,16 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>, - <1 0 0x08000000 0x01000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */ + <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 93f8dfe20f13..eff816e0bc0a 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -362,7 +362,11 @@ <7 0 0x15000000 0x01000000>; nand@0,0 { - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; /* no elm on omap3 */ diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index f2e213931e09..5c67429a4da7 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -53,3 +53,7 @@ }; }; }; + +&modem { + compatible = "nokia,n9-modem"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 74d8f7eb5563..b3c26a96a726 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -65,50 +65,51 @@ camera_lens_cover { label = "Camera Lens Cover"; gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_CAMERA_LENS_COVER>; + linux,can-disable; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ - linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ - wakeup-source; + linux,code = <KEY_CAMERA_FOCUS>; + linux,can-disable; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ - linux,code = <0xd4>; /* KEY_CAMERA */ - wakeup-source; + linux,code = <KEY_CAMERA>; + linux,can-disable; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ - linux,code = <0x98>; /* KEY_SCREENLOCK */ - wakeup-source; + linux,code = <KEY_SCREENLOCK>; + linux,can-disable; }; keypad_slide { label = "Keypad Slide"; gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; }; proximity_sensor { label = "Proximity Sensor"; gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ + linux,input-type = <EV_SW>; + linux,code = <SW_FRONT_PROXIMITY>; + linux,can-disable; }; }; - isp1704: isp1704 { - compatible = "nxp,isp1704"; + isp1707: isp1707 { + compatible = "nxp,isp1707"; nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; @@ -522,6 +523,21 @@ amstaos,cover-comp-gain = <16>; }; + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + led-max-microamp = <50000>; + }; + indicator { + led-max-microamp = <17500>; + }; + }; + lp5523: lp5523@32 { compatible = "national,lp5523"; reg = <0x32>; @@ -618,7 +634,7 @@ ti,termination-current = <100>; ti,resistor-sense = <68>; - ti,usb-charger-detection = <&isp1704>; + ti,usb-charger-detection = <&isp1707>; }; }; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a2c2b8d8dd2c..858a25048102 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -31,6 +31,14 @@ startup-delay-us = <150>; enable-active-high; }; + + vwlan_fixed: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VWLAN"; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ + enable-active-high; + regulator-boot-off; + }; }; &omap3_pmx_core { @@ -44,6 +52,55 @@ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ >; }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ + OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ + >; + }; + + ssi_pins: pinmux_ssi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; + + ssi_pins_idle: pinmux_ssi_pins_idle { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */ + >; + }; + + modem_pins1: pinmux_modem_core1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ + >; + }; +}; + +&omap3_pmx_core2 { + modem_pins2: pinmux_modem_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ + >; + }; }; &i2c1 { @@ -191,3 +248,39 @@ }; }; }; + +&ssi_port1 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&ssi_pins>; + pinctrl-1 = <&ssi_pins_idle>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + + modem: hsi-client { + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins1 &modem_pins2>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <96000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */ + + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */ + <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */ + <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en"; + }; +}; + +&ssi_port2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 0885b34d5d7d..7f219a9dc5be 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -17,6 +17,17 @@ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; +&omap3_pmx_core { + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; +}; + &i2c2 { smia_1: camera@10 { compatible = "nokia,smia"; @@ -53,3 +64,25 @@ }; }; }; + +&mcspi4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + + wlcore: wlcore@0 { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + reg = <0>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */ + vwlan-supply = <&vwlan_fixed>; + }; +}; + +&modem { + compatible = "nokia,n950-modem"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index a29ad16cc9bb..de256fa8da48 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -226,8 +226,12 @@ ranges = <0 0 0x00000000 0x20000000>; nand@0,0 { + compatible = "ti,omap2-nand"; linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 13e9d1f987af..bcf39d606b65 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -546,7 +546,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts new file mode 100644 index 000000000000..78a1184cb312 --- /dev/null +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "LG Optimus Black"; + compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ + >; + }; + + dp3t_sel_pins: pinmux_dp3t_sel_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + + lp8720_en_pin: pinmux_lp8720_en_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + + usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7 */ + >; + }; +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + + mmc1_cd_pin: pinmux_mmc1_cd_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */ + >; + }; +}; + +&gpio2 { + ti,no-reset-on-init; +}; + +&gpio5 { + ti,no-reset-on-init; +}; + +&gpio6 { + ti,no-reset-on-init; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &dp3t_sel_pins>; + + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; + + lp8720@7d { + pinctrl-names = "default"; + pinctrl-0 = <&lp8720_en_pin>; + + compatible = "ti,lp8720"; + reg = <0x7d>; + + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */ + + lp8720_ldo1: ldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>; + + vmmc-supply = <&lp8720_ldo1>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */ + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + vmmc-supply = <&vmmc2>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_hs_pins>; + + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP) + MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN) + MATRIX_KEY(0x02, 0x00, KEY_SELECT) + >; +}; + +/* + * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3. + * When not powered, these sensors cause the I2C3 clock to stay low at all times, + * making it impossible to reach other devices on I2C3. + */ + +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&vdac { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index ae5dbbd9d569..644d3c8ea66a 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -275,10 +275,14 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d1ffabb7c74f..b41d07e8e765 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -723,6 +723,8 @@ gpmc,num-waitpins = <4>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; }; usb_otg_hs: usb_otg_hs@480ab000 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 16b0cdfbee9c..a0dc8d854142 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -103,10 +103,14 @@ }; nand@1,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; - reg = <1 0 4>; /* CS1, offset 0, IO size 4 */ ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 4f6b2d5b1902..387dc31822fe 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -54,6 +54,12 @@ #size-cells = <0>; }; }; + + bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap34xx-bandgap"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 86253de5a97a..f19c87bd6bf3 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -86,6 +86,12 @@ #size-cells = <0>; }; }; + + bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap36xx-bandgap"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 888412c63f97..902657d6713b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -130,6 +130,16 @@ }; }; +&gpio8 { + /* TI trees use GPIO instead of msecure, see also muxing */ + p234 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio8_234/msecure"; + }; +}; + &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -213,6 +223,13 @@ >; }; + /* TI trees use GPIO mode; msecure mode does not work reliably? */ + palmas_msecure_pins: palmas_msecure_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ + >; + }; + usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ @@ -278,6 +295,12 @@ &usbhost_wkup_pins >; + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + >; + }; + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ @@ -345,6 +368,8 @@ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; extcon_usb3: palmas_usb { compatible = "ti,palmas-usb-vid"; @@ -358,6 +383,14 @@ #clock-cells = <0>; }; + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index ca3c17fde5a0..38805ebbe2ba 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -852,18 +852,6 @@ hw-caps-temp-alert; }; - omap_control_usb2phy: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; @@ -885,7 +873,6 @@ phys = <&usb2_phy>, <&usb3_phy>; phy-names = "usb2-phy", "usb3-phy"; dr_mode = "peripheral"; - tx-fifo-resize; }; }; @@ -899,7 +886,7 @@ usb2_phy: usb2phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; - ctrl-module = <&omap_control_usb2phy>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; @@ -911,7 +898,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, <&usb_otg_ss_refclk960m>; @@ -967,14 +954,6 @@ #thermal-sensor-cells = <1>; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -989,7 +968,7 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; #phy-cells = <0>; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts new file mode 100644 index 000000000000..1cf644bfd7ea --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -0,0 +1,87 @@ +/* + * Device Tree file for Buffalo Linkstation LS-GL + * (also known as Buffalo Linkstation Pro/Live) + * + * Copyright (C) 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c + * Copyright (C) Ronen Shitrit <rshitrit@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo Linkstation Pro/Live"; + compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf..0eead400f427 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -44,9 +45,10 @@ /dts-v1/; +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "orion5x-mv88f5182.dtsi" / { model = "Buffalo Linkstation LS-WTGL"; @@ -57,217 +59,93 @@ reg = <0x00000000 0x4000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, - <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, - <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; - - internal-regs { - pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - pmx_led_power: pmx-leds { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_led_alarm: pmx-leds { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_led_info: pmx-leds { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp12"; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp13"; - marvell,function = "sata1"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp8", "mpp10"; - marvell,function = "gpio"; - }; - }; - }; - }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; + power-on-switch { gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - button@2 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; + power-auto-switch { gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; }; gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_power &pmx_led_alarm - &pmx_led_info>; - pinctrl-names = "default"; - - led@1 { - label = "lswtgl:blue:power"; + blue-power-led { gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; - led@2 { - label = "lswtgl:red:alarm"; + red-alarm-led { gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - led@3 { - label = "lswtgl:amber:info"; + amber-info-led { gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; }; gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW &gpio0 17 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +}; - restart_poweroff { - compatible = "restart-poweroff"; +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>; - pinctrl-names = "default"; + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; - hdd_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - }; + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; }; -}; -&mdio { - status = "okay"; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; - ethphy: ethernet-phy { - reg = <8>; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10"; + marvell,function = "gpio"; }; -}; -ð { - status = "okay"; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; - ethernet-port@0 { - phy-handle = <ðphy>; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; }; -}; -&ehci0 { - status = "okay"; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; }; -&i2c { - status = "okay"; - - rtc { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - }; +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; }; -&wdt { - status = "disabled"; +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; &sata { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; nr-ports = <2>; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi new file mode 100644 index 000000000000..ed456ab35fd8 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -0,0 +1,180 @@ +/* + * Device Tree common file for orion5x based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "orion5x-mv88f5182.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,function = "gpio"; + }; +}; + +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + rtc { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&wdt { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <1>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 7d253bb6265a..a00d7ce7802b 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -25,6 +25,37 @@ reg = <0x80000000 0x4000000>; }; + regulators { + backlight_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "backlight_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + lcd_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + sd_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "sd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + }; + }; + ahb { mac: ethernet@31060000 { phy-mode = "rmii"; @@ -140,6 +171,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; + vmmc-supply = <&sd_reg>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 7f68a1ee7073..210192c38df3 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -13,6 +13,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <75>; status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index cf6998a0804d..fec47bcd8292 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -12,6 +12,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <100>; status = "okay"; }; @@ -30,7 +31,7 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; - dmas = <&pdma 97>; + dmas = <&pdma 97 3>; dma-names = "data"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 000000000000..c535b3f0e5cf --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,276 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + volume_up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEUP>; + }; + volume_down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + lvs1 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; + + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 21095dad7741..35f1d46edded 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -37,6 +37,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm@108000 { @@ -103,6 +115,11 @@ regulator-max-microvolt = <1900000>; bias-pull-down; }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + }; }; @@ -195,6 +212,16 @@ }; }; + pci@1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&v3p3_fixed>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index fd4d49ef9ef2..2eeb0904eaa7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -9,6 +9,11 @@ aliases { serial0 = &gsbi7_serial; serial1 = &gsbi6_serial; + i2c0 = &gsbi1_i2c; + i2c1 = &gsbi2_i2c; + i2c2 = &gsbi3_i2c; + i2c3 = &gsbi4_i2c; + spi0 = &gsbi5_spi; }; chosen { @@ -157,7 +162,16 @@ gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; - i2c3: i2c@16280000 { + i2c@16280000 { + status = "okay"; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + /* CAM I2C MIPI-CSI connector */ + i2c@16380000 { status = "okay"; }; }; @@ -178,6 +192,16 @@ }; }; + gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + spi4: spi@1a280000 { + status = "okay"; + num-cs = <1>; + cs-gpios = <&tlmm_pinmux 53 0>; + }; + }; + gsbi@16500000 { status = "ok"; qcom,mode = <GSBI_PROT_UART_W_FC>; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi new file mode 100644 index 000000000000..b57c59d5bc00 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -0,0 +1,208 @@ + +&tlmm_pinmux { + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c1_pins_sleep: i2c1_pins_sleep { + mux { + pins = "gpio20", "gpio21"; + function = "gpio"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio24", "gpio25"; + function = "gsbi2"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c2_pins_sleep: i2c2_pins_sleep { + mux { + pins = "gpio24", "gpio25"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c3_pins_sleep: i2c3_pins_sleep { + mux { + pins = "gpio8", "gpio9"; + function = "gpio"; + }; + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c4_pins: i2c4 { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + }; + + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c4_pins_sleep: i2c4_pins_sleep { + mux { + pins = "gpio12", "gpio13"; + function = "gpio"; + }; + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + spi5_default: spi5_default { + pinmux { + pins = "gpio51", "gpio52", "gpio54"; + function = "gsbi5"; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio53"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio54"; + drive-strength = <16>; + bias-disable; + }; + + pinconf_cs { + pins = "gpio53"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio16", "gpio17"; + function = "gsbi6"; + }; + + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c6_pins_sleep: i2c6_pins_sleep { + mux { + pins = "gpio16", "gpio17"; + function = "gpio"; + }; + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ed521e85e208..65d0e8d98259 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -142,62 +142,6 @@ pinctrl-names = "default"; pinctrl-0 = <&ps_hold>; - - sdc4_gpios: sdc4-gpios { - pios { - pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; - function = "sdc4"; - }; - }; - - ps_hold: ps_hold { - mux { - pins = "gpio78"; - function = "ps_hold"; - }; - }; - - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - - i2c3_pins: i2c3 { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi3"; - }; - }; - - gsbi6_uart_2pins: gsbi6_uart_2pins { - mux { - pins = "gpio14", "gpio15"; - function = "gsbi6"; - }; - }; - - gsbi6_uart_4pins: gsbi6_uart_4pins { - mux { - pins = "gpio14", "gpio15", "gpio16", "gpio17"; - function = "gsbi6"; - }; - }; - - gsbi7_uart_2pins: gsbi7_uart_2pins { - mux { - pins = "gpio82", "gpio83"; - function = "gsbi7"; - }; - }; - - gsbi7_uart_4pins: gsbi7_uart_4pins { - mux { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "gsbi7"; - }; - }; }; sfpb_wrapper_mutex: syscon@1200000 { @@ -281,10 +225,10 @@ syscon-tcsr = <&tcsr>; - i2c1: i2c@12460000 { + gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -292,6 +236,7 @@ #address-cells = <1>; #size-cells = <0>; }; + }; gsbi2: gsbi@12480000 { @@ -307,9 +252,11 @@ syscon-tcsr = <&tcsr>; - i2c2: i2c@124a0000 { + gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; + pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>; + pinctrl-names = "default", "sleep"; interrupts = <0 196 IRQ_TYPE_NONE>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; @@ -328,15 +275,40 @@ #address-cells = <1>; #size-cells = <1>; ranges; - i2c3: i2c@16280000 { + gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>; + pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi4: gsbi@16300000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x03>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi4_i2c: i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16380000 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI4_QUP_CLK>, + <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; }; }; @@ -360,6 +332,19 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi5_spi: spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + pinctrl-0 = <&spi5_default &spi5_sleep>; + pinctrl-names = "default", "sleep"; + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; gsbi6: gsbi@16500000 { @@ -382,6 +367,17 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI6_QUP_CLK>, + <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + }; }; gsbi7: gsbi@16600000 { @@ -521,6 +517,11 @@ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; + #clock-cells = <1>; + }; + regulators { compatible = "qcom,rpm-pm8921-regulators"; @@ -721,7 +722,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -823,3 +824,4 @@ }; }; }; +#include "qcom-apq8064-pins.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 08214cbae16d..a33a09f6821e 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -91,6 +91,20 @@ interrupts = <1 7 0xf04>; }; + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index fa698635eea0..2601a907947b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -62,6 +62,18 @@ }; clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e5f7f33aa467..cd214030b84a 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -42,6 +42,26 @@ interrupts = <1 9 0x304>; }; + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -167,7 +187,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 51a40d84145c..da05e28a81a7 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -251,7 +251,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index dfdafdcb8aae..ef5330578431 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -14,10 +14,50 @@ #size-cells = <1>; ranges; + mpss@08000000 { + reg = <0x08000000 0x5100000>; + no-map; + }; + + mba@00d100000 { + reg = <0x0d100000 0x100000>; + no-map; + }; + + reserved@0d200000 { + reg = <0x0d200000 0xa00000>; + no-map; + }; + + adsp@0dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; + + venus@0f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + smem_region: smem@fa00000 { reg = <0xfa00000 0x200000>; no-map; }; + + tz@0fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; + }; + + efs@0fd600000 { + reg = <0x0fd60000 0x1a0000>; + no-map; + }; + + unused@0ff00000 { + reg = <0x0ff00000 0x10100000>; + no-map; + }; }; cpus { @@ -91,6 +131,20 @@ interrupts = <1 7 0xf04>; }; + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, @@ -109,6 +163,73 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupt-parent = <&intc>; + interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-2 = <&apcs 8 9>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + adsp_smsm: adsp@2 { + reg = <2>; + interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -339,6 +460,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -356,6 +479,16 @@ interrupt-controller; #interrupt-cells = <4>; }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 9f357f68713c..0512f645922e 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -11,7 +11,7 @@ pm8841_mpps: mpps@a000 { compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x400>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, @@ -22,7 +22,7 @@ temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index ca53a5947437..d95edb6f6265 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -12,15 +12,15 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x100>, - <0x6100 0x100>; + reg = <0x6000>, + <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pwrkey@800 { compatible = "qcom,pm8941-pwrkey"; - reg = <0x800 0x100>; + reg = <0x800>; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; @@ -28,7 +28,7 @@ charger@1000 { compatible = "qcom,pm8941-charger"; - reg = <0x1000 0x700>; + reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, @@ -49,7 +49,7 @@ pm8941_gpios: gpios@c000 { compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; - reg = <0xc000 0x2400>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -92,7 +92,7 @@ pm8941_mpps: mpps@a000 { compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x800>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -107,7 +107,7 @@ pm8941_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; io-channels = <&pm8941_vadc VADC_DIE_TEMP>; io-channel-names = "thermal"; @@ -116,7 +116,7 @@ pm8941_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; @@ -141,7 +141,7 @@ pm8941_iadc: iadc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; - reg = <0x3600 0x100>; + reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; @@ -161,7 +161,7 @@ pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; - reg = <0xd800 0x100>; + reg = <0xd800>; label = "backlight"; status = "disabled"; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 4657d7fb5bce..89e46ebef1bc 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/clock/r7s72100-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -152,12 +153,12 @@ scif0: serial@e8007000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007000 64>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>, - <0 191 IRQ_TYPE_LEVEL_HIGH>, - <0 192 IRQ_TYPE_LEVEL_HIGH>, - <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -165,12 +166,12 @@ scif1: serial@e8007800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007800 64>; - interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>, - <0 195 IRQ_TYPE_LEVEL_HIGH>, - <0 196 IRQ_TYPE_LEVEL_HIGH>, - <0 193 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -178,12 +179,12 @@ scif2: serial@e8008000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8008000 64>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>, - <0 200 IRQ_TYPE_LEVEL_HIGH>, - <0 197 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -191,12 +192,12 @@ scif3: serial@e8008800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8008800 64>; - interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>, - <0 203 IRQ_TYPE_LEVEL_HIGH>, - <0 204 IRQ_TYPE_LEVEL_HIGH>, - <0 201 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -204,12 +205,12 @@ scif4: serial@e8009000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8009000 64>; - interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>, - <0 207 IRQ_TYPE_LEVEL_HIGH>, - <0 208 IRQ_TYPE_LEVEL_HIGH>, - <0 205 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -217,12 +218,12 @@ scif5: serial@e8009800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8009800 64>; - interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>, - <0 211 IRQ_TYPE_LEVEL_HIGH>, - <0 212 IRQ_TYPE_LEVEL_HIGH>, - <0 209 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -230,12 +231,12 @@ scif6: serial@e800a000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe800a000 64>; - interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>, - <0 215 IRQ_TYPE_LEVEL_HIGH>, - <0 216 IRQ_TYPE_LEVEL_HIGH>, - <0 213 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -243,12 +244,12 @@ scif7: serial@e800a800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe800a800 64>; - interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>, - <0 219 IRQ_TYPE_LEVEL_HIGH>, - <0 220 IRQ_TYPE_LEVEL_HIGH>, - <0 217 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -256,9 +257,9 @@ spi0: spi@e800c800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800c800 0x24>; - interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>, - <0 239 IRQ_TYPE_LEVEL_HIGH>, - <0 240 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI0>; power-domains = <&cpg_clocks>; @@ -271,9 +272,9 @@ spi1: spi@e800d000 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800d000 0x24>; - interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>, - <0 242 IRQ_TYPE_LEVEL_HIGH>, - <0 243 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI1>; power-domains = <&cpg_clocks>; @@ -286,9 +287,9 @@ spi2: spi@e800d800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800d800 0x24>; - interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>, - <0 245 IRQ_TYPE_LEVEL_HIGH>, - <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI2>; power-domains = <&cpg_clocks>; @@ -301,9 +302,9 @@ spi3: spi@e800e000 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800e000 0x24>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>, - <0 248 IRQ_TYPE_LEVEL_HIGH>, - <0 249 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI3>; power-domains = <&cpg_clocks>; @@ -316,9 +317,9 @@ spi4: spi@e800e800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800e800 0x24>; - interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>, - <0 251 IRQ_TYPE_LEVEL_HIGH>, - <0 252 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI4>; power-domains = <&cpg_clocks>; @@ -342,14 +343,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee000 0x44>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, - <0 158 IRQ_TYPE_EDGE_RISING>, - <0 159 IRQ_TYPE_EDGE_RISING>, - <0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 164 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -361,14 +362,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee400 0x44>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 166 IRQ_TYPE_EDGE_RISING>, - <0 167 IRQ_TYPE_EDGE_RISING>, - <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 169 IRQ_TYPE_LEVEL_HIGH>, - <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -380,14 +381,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee800 0x44>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>, - <0 174 IRQ_TYPE_EDGE_RISING>, - <0 175 IRQ_TYPE_EDGE_RISING>, - <0 176 IRQ_TYPE_LEVEL_HIGH>, - <0 177 IRQ_TYPE_LEVEL_HIGH>, - <0 178 IRQ_TYPE_LEVEL_HIGH>, - <0 179 IRQ_TYPE_LEVEL_HIGH>, - <0 180 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -399,14 +400,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfeec00 0x44>; - interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>, - <0 182 IRQ_TYPE_EDGE_RISING>, - <0 183 IRQ_TYPE_EDGE_RISING>, - <0 184 IRQ_TYPE_LEVEL_HIGH>, - <0 185 IRQ_TYPE_LEVEL_HIGH>, - <0 186 IRQ_TYPE_LEVEL_HIGH>, - <0 187 IRQ_TYPE_LEVEL_HIGH>, - <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -416,7 +417,7 @@ mtu2: timer@fcff0000 { compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tgi0a"; clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index cb4f7b2798fe..6583a1dfca1f 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -29,6 +29,7 @@ reg = <0>; clock-frequency = <1500000000>; power-domains = <&pd_a2sl>; + next-level-cache = <&L2_CA15>; }; }; @@ -39,10 +40,26 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; + power-domains = <&pd_a3sm>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@1 { + compatible = "cache"; + clocks = <&cpg_clocks R8A73A4_CLK_Z2>; + power-domains = <&pd_a3km>; + cache-unified; + cache-level = <2>; }; dbsc1: memory-controller@e6790000 { @@ -69,27 +86,27 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH - 0 215 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -106,7 +123,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC5>; power-domains = <&pd_a3sp>; @@ -116,7 +133,7 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -131,38 +148,38 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 4 IRQ_TYPE_LEVEL_HIGH>, - <0 5 IRQ_TYPE_LEVEL_HIGH>, - <0 6 IRQ_TYPE_LEVEL_HIGH>, - <0 7 IRQ_TYPE_LEVEL_HIGH>, - <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>, - <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>, - <0 18 IRQ_TYPE_LEVEL_HIGH>, - <0 19 IRQ_TYPE_LEVEL_HIGH>, - <0 20 IRQ_TYPE_LEVEL_HIGH>, - <0 21 IRQ_TYPE_LEVEL_HIGH>, - <0 22 IRQ_TYPE_LEVEL_HIGH>, - <0 23 IRQ_TYPE_LEVEL_HIGH>, - <0 24 IRQ_TYPE_LEVEL_HIGH>, - <0 25 IRQ_TYPE_LEVEL_HIGH>, - <0 26 IRQ_TYPE_LEVEL_HIGH>, - <0 27 IRQ_TYPE_LEVEL_HIGH>, - <0 28 IRQ_TYPE_LEVEL_HIGH>, - <0 29 IRQ_TYPE_LEVEL_HIGH>, - <0 30 IRQ_TYPE_LEVEL_HIGH>, - <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -172,32 +189,32 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>, - <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>, - <0 39 IRQ_TYPE_LEVEL_HIGH>, - <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>, - <0 43 IRQ_TYPE_LEVEL_HIGH>, - <0 44 IRQ_TYPE_LEVEL_HIGH>, - <0 45 IRQ_TYPE_LEVEL_HIGH>, - <0 46 IRQ_TYPE_LEVEL_HIGH>, - <0 47 IRQ_TYPE_LEVEL_HIGH>, - <0 48 IRQ_TYPE_LEVEL_HIGH>, - <0 49 IRQ_TYPE_LEVEL_HIGH>, - <0 50 IRQ_TYPE_LEVEL_HIGH>, - <0 51 IRQ_TYPE_LEVEL_HIGH>, - <0 52 IRQ_TYPE_LEVEL_HIGH>, - <0 53 IRQ_TYPE_LEVEL_HIGH>, - <0 54 IRQ_TYPE_LEVEL_HIGH>, - <0 55 IRQ_TYPE_LEVEL_HIGH>, - <0 56 IRQ_TYPE_LEVEL_HIGH>, - <0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -237,7 +254,7 @@ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; power-domains = <&pd_c5>; }; @@ -247,7 +264,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -258,7 +275,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -269,7 +286,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -280,7 +297,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -291,7 +308,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC4>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -302,7 +319,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC6>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -313,7 +330,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC7>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -324,7 +341,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A73A4_CLK_IIC8>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -333,9 +350,9 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -343,9 +360,9 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -353,9 +370,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c40000 0 0x100>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -363,9 +380,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c50000 0 0x100>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -373,9 +390,9 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -383,9 +400,9 @@ scifb3: serial@e6cf0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6cf0000 0 0x100>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_c4>; status = "disabled"; }; @@ -393,7 +410,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -403,7 +420,7 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -413,7 +430,7 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -423,7 +440,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -433,7 +450,7 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -449,7 +466,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; bsc: bus@fec10000 { diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 6ef954766eef..995fbda74b7a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7740-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -41,7 +42,7 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_a3sm>; arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; @@ -58,7 +59,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; }; ptm { @@ -69,7 +70,7 @@ cmt1: timer@e6138000 { compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; reg = <0xe6138000 0x170>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -89,14 +90,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -111,14 +112,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -133,14 +134,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -155,14 +156,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -171,7 +172,7 @@ compatible = "renesas,gether-r8a7740"; reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_GETHER>; power-domains = <&pd_a4s>; phy-mode = "mii"; @@ -185,10 +186,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_IIC0>; power-domains = <&pd_a4r>; status = "disabled"; @@ -199,10 +200,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH - 0 71 IRQ_TYPE_LEVEL_HIGH - 0 72 IRQ_TYPE_LEVEL_HIGH - 0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -211,9 +212,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -221,9 +222,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -231,9 +232,9 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -241,9 +242,9 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -251,9 +252,9 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -261,9 +262,9 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -271,9 +272,9 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -281,9 +282,9 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -291,9 +292,9 @@ scifb: serial@e6c30000 { compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -329,8 +330,8 @@ mmcif0: mmc@e6bd0000 { compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH - 0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_MMC>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -339,9 +340,9 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH - 0 118 IRQ_TYPE_LEVEL_HIGH - 0 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -352,9 +353,9 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH - 0 122 IRQ_TYPE_LEVEL_HIGH - 0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -365,9 +366,9 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH - 0 126 IRQ_TYPE_LEVEL_HIGH - 0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -379,7 +380,7 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 0x4>; clocks = <&mstp3_clks R8A7740_CLK_FSI>; power-domains = <&pd_a4mp>; status = "disabled"; @@ -388,9 +389,9 @@ tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>, - <0 200 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU0>; clock-names = "fck"; power-domains = <&pd_a4r>; @@ -403,9 +404,9 @@ tmu1: timer@fff90000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff90000 0x2c>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU1>; clock-names = "fck"; power-domains = <&pd_a4r>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index a52b359e2ae2..21e3b9dda2da 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -126,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + mmc_pins: mmc { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; @@ -217,3 +225,8 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 791aafd310a5..f83a348fc07a 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -17,6 +17,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7778-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -51,7 +52,7 @@ ether: ethernet@fde00000 { compatible = "renesas,ether-r8a7778"; reg = <0xfde00000 0x400>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7778_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -79,17 +80,17 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -100,7 +101,7 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -111,7 +112,7 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -122,7 +123,7 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -133,7 +134,7 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 27>; @@ -151,7 +152,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -162,7 +163,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -173,7 +174,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -184,7 +185,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -193,9 +194,9 @@ tmu0: timer@ffd80000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd80000 0x30>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -208,9 +209,9 @@ tmu1: timer@ffd81000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd81000 0x30>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -223,9 +224,9 @@ tmu2: timer@ffd82000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd82000 0x30>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -285,72 +286,84 @@ }; rcar_sound,ssi { - ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; }; }; scif0: serial@ffe40000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe40000 0x100>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF0>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif1: serial@ffe41000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe41000 0x100>; - interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF1>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif2: serial@ffe42000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe42000 0x100>; - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF2>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif3: serial@ffe43000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe43000 0x100>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF3>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif4: serial@ffe44000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe44000 0x100>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF4>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif5: serial@ffe45000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe45000 0x100>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF5>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -358,7 +371,7 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -367,7 +380,7 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -376,7 +389,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -385,7 +398,7 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -394,7 +407,7 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -405,7 +418,7 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -416,7 +429,7 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -437,6 +450,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@ffc80000 { compatible = "renesas,r8a7778-cpg-clocks"; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index fe396c8d58db..e111d35d02ae 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -165,6 +165,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { du0 { renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; @@ -176,6 +179,11 @@ }; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk_b"; + renesas,function = "scif_clk"; + }; + ethernet_pins: ethernet { intc { renesas,groups = "intc_irq1_b"; @@ -222,6 +230,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 6afa909865b5..a0cc08e6295b 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -74,7 +74,7 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -85,7 +85,7 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -96,7 +96,7 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -107,7 +107,7 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -118,7 +118,7 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -129,7 +129,7 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -140,7 +140,7 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 9>; @@ -159,10 +159,10 @@ <0xfe780044 4>, <0xfe780064 4>, <0xfe780000 4>; - interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -171,7 +171,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -182,7 +182,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -193,7 +193,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -204,68 +204,80 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; power-domains = <&cpg_clocks>; status = "disabled"; }; scif0: serial@ffe40000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe40000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF0>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif1: serial@ffe41000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe41000 0x100>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF1>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif2: serial@ffe42000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe42000 0x100>; - interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF2>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif3: serial@ffe43000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe43000 0x100>; - interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF3>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif4: serial@ffe44000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe44000 0x100>; - interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF4>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif5: serial@ffe45000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe45000 0x100>; - interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF5>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -283,9 +295,9 @@ tmu0: timer@ffd80000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd80000 0x30>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -298,9 +310,9 @@ tmu1: timer@ffd81000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd81000 0x30>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -313,9 +325,9 @@ tmu2: timer@ffd82000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd82000 0x30>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -328,7 +340,7 @@ sata: sata@fc600000 { compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&cpg_clocks>; }; @@ -336,7 +348,7 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -345,7 +357,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -354,7 +366,7 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -363,7 +375,7 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -372,7 +384,7 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -383,7 +395,7 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -394,7 +406,7 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -405,7 +417,7 @@ du: display@fff80000 { compatible = "renesas,du-r8a7779"; reg = <0 0xfff80000 0 0x40000>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -441,6 +453,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: clocks@ffc80000 { compatible = "renesas,r8a7779-cpg-clocks"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 052dcee4790d..aa6ca92a9485 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -3,6 +3,7 @@ * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. + * Copyright (C) 2015-2016 Renesas Electronics Corporation * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -49,6 +50,7 @@ aliases { serial0 = &scif0; serial1 = &scifa1; + i2c8 = "i2cexio"; }; chosen { @@ -252,6 +254,23 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + /* + * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. + * We use the I2C demuxer, so the desired IP core can be selected at runtime + * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). + * Note: For testing the I2C slave feature, it is convenient to connect this + * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and + * instantiate the slave device at runtime according to the documentation. + * You can then communicate with the slave via IIC3. + */ + i2cexio: i2c@8 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic0>, <&i2c0>; + i2c-bus-name = "i2c-exio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -291,6 +310,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; renesas,function = "du"; @@ -301,6 +323,11 @@ renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -342,6 +369,11 @@ renesas,function = "msiof1"; }; + i2c0_pins: i2c0 { + renesas,groups = "i2c0"; + renesas,function = "i2c0"; + }; + iic0_pins: iic0 { renesas,groups = "iic0"; renesas,function = "iic0"; @@ -485,6 +517,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &msiof1 { pinctrl-0 = <&msiof1_pins>; pinctrl-names = "default"; @@ -524,10 +561,14 @@ cpu0-supply = <&vdd_dvfs>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "i2c-exio"; +}; + &iic0 { - status = "okay"; pinctrl-0 = <&iic0_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-exio"; }; &iic1 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7dfd393bfc7e..38b706399a6b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -52,6 +52,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -67,6 +68,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu2: cpu@2 { @@ -74,6 +76,7 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu3: cpu@3 { @@ -81,6 +84,7 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu4: cpu@4 { @@ -88,6 +92,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu5: cpu@5 { @@ -95,6 +100,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu6: cpu@6 { @@ -102,6 +108,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu7: cpu@7 { @@ -109,9 +116,41 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -121,13 +160,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -140,7 +179,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 30>; @@ -153,7 +192,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 30>; @@ -166,7 +205,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -179,7 +218,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -192,7 +231,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -202,27 +241,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -235,14 +277,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -257,10 +299,10 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -268,22 +310,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -299,22 +341,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -330,20 +372,20 @@ audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -359,20 +401,20 @@ audma1: dma-controller@ec720000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -388,8 +430,8 @@ usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH - 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; power-domains = <&cpg_clocks>; @@ -400,8 +442,8 @@ usb_dmac1: dma-controller@e65b0000 { compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH - 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; power-domains = <&cpg_clocks>; @@ -414,7 +456,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -426,7 +468,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -438,7 +480,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -450,7 +492,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -462,7 +504,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; @@ -475,7 +517,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; @@ -488,7 +530,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; - interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>; dma-names = "tx", "rx"; @@ -501,7 +543,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; @@ -512,7 +554,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -525,7 +567,7 @@ mmcif1: mmc@ee220000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; dma-names = "tx", "rx"; @@ -543,7 +585,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; @@ -554,7 +596,7 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x328>; - interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; @@ -565,7 +607,7 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; @@ -576,7 +618,7 @@ sdhi3: sd@ee160000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; @@ -585,11 +627,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -597,11 +640,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -609,11 +653,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -621,11 +666,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -633,11 +679,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -645,11 +692,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -657,11 +705,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7790", "renesas,scif"; + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -669,11 +719,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7790", "renesas,scif"; + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -681,11 +733,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7790", "renesas,hscif"; + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -693,11 +747,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7790", "renesas,hscif"; + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -707,7 +763,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7790"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -717,9 +773,10 @@ }; avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7790"; + compatible = "renesas,etheravb-r8a7790", + "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -730,7 +787,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee300000 0 0x2000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -739,16 +796,16 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee500000 0 0x2000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; power-domains = <&cpg_clocks>; status = "disabled"; }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790"; + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; @@ -783,7 +840,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -792,7 +849,7 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -801,7 +858,7 @@ vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -810,7 +867,7 @@ vin3: video@e6ef3000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef3000 0 0x1000>; - interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -819,7 +876,7 @@ vsp1@fe920000 { compatible = "renesas,vsp1"; reg = <0 0xfe920000 0 0x8000>; - interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; power-domains = <&cpg_clocks>; @@ -832,7 +889,7 @@ vsp1@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; power-domains = <&cpg_clocks>; @@ -846,7 +903,7 @@ vsp1@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; - interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; power-domains = <&cpg_clocks>; @@ -860,7 +917,7 @@ vsp1@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; power-domains = <&cpg_clocks>; @@ -877,9 +934,9 @@ <0 0xfeb90000 0 0x1c>, <0 0xfeb94000 0 0x1c>; reg-names = "du", "lvds.0", "lvds.1"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>, - <0 269 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_DU0>, <&mstp7_clks R8A7790_CLK_DU1>, <&mstp7_clks R8A7790_CLK_DU2>, @@ -913,7 +970,7 @@ can0: can@e6e80000 { compatible = "renesas,can-r8a7790"; reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -924,7 +981,7 @@ can1: can@e6e88000 { compatible = "renesas,can-r8a7790"; reg = <0 0xe6e88000 0 0x1000>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -935,7 +992,7 @@ jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7790"; reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; power-domains = <&cpg_clocks>; }; @@ -986,6 +1043,15 @@ clock-output-names = "audio_clk_c"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; @@ -1401,7 +1467,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -1415,7 +1481,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; @@ -1428,7 +1494,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e10000 0 0x0064>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; @@ -1441,7 +1507,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e00000 0 0x0064>; - interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; @@ -1454,7 +1520,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6c90000 0 0x0064>; - interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; dma-names = "tx", "rx"; @@ -1467,7 +1533,7 @@ xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7790"; reg = <0 0xee000000 0 0xc00>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; power-domains = <&cpg_clocks>; phys = <&usb2 1>; @@ -1476,11 +1542,11 @@ }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1491,9 +1557,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1511,11 +1577,11 @@ }; pci1: pci@ee0b0000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; - interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1526,19 +1592,19 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; pci2: pci@ee0d0000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; bus-range = <2 2>; @@ -1547,9 +1613,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1567,7 +1633,7 @@ }; pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7790"; + compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1580,12 +1646,12 @@ /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; - interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, - <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&cpg_clocks>; @@ -1664,52 +1730,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -1717,52 +1783,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; @@ -1772,8 +1838,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1781,7 +1847,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1789,8 +1855,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1798,7 +1864,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1806,8 +1872,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1815,7 +1881,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 45256f3cc835..0ad71b81d3a2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -320,6 +320,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; @@ -340,6 +343,11 @@ renesas,function = "scif1"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -440,6 +448,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6713b1ea732b..6c08314427d6 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -8,6 +8,17 @@ * kind, whether express or implied. */ +/* + * SSI-AK4642 + * + * JP3: 2-1: AK4642 + * 2-3: ADV7511 + * + * This command is required before playback/capture: + * + * amixer set "LINEOUT Mixer DACL" on + */ + /dts-v1/; #include "r8a7791.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -78,6 +89,53 @@ states = <3300000 1 1800000 0>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x16_clk: x16-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x14_clk: x14-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&soundcodec>; + simple-audio-card,frame-master = <&soundcodec>; + + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + soundcodec: simple-audio-card,codec { + sound-dai = <&ak4642>; + clocks = <&x14_clk>; + }; + }; }; &extal_clk { @@ -85,11 +143,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -139,6 +205,21 @@ renesas,groups = "can0_data"; renesas,function = "can0"; }; + + du_pins: du { + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + renesas,function = "du"; + }; + + ssi_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + audio_clk_pins: audio_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; &scif0 { @@ -148,6 +229,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -229,6 +315,12 @@ status = "okay"; clock-frequency = <400000>; + ak4642: codec@12 { + compatible = "asahi-kasei,ak4642"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -241,6 +333,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &sata0 { @@ -283,7 +407,6 @@ pinctrl-names = "default"; status = "okay"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy { @@ -304,3 +427,44 @@ status = "okay"; }; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7791_CLK_DU0>, + <&mstp7_clks R8A7791_CLK_DU1>, + <&mstp7_clks R8A7791_CLK_LVDS0>, + <&x3_clk>, <&x16_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; +}; + +&rcar_sound { + pinctrl-0 = <&ssi_pins &audio_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>; + capture = <&ssi1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 2a369ddcb6fd..6439f0569fe2 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -51,6 +51,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -66,9 +67,35 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + next-level-cache = <&L2_CA15>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -78,13 +105,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -97,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -110,7 +137,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -123,7 +150,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -136,7 +163,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -149,7 +176,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -162,7 +189,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 32>; @@ -175,7 +202,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055800 0 0x50>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 224 26>; @@ -185,27 +212,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -218,14 +248,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -240,16 +270,16 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7791_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -257,22 +287,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -288,22 +318,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -319,20 +349,20 @@ audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -348,20 +378,20 @@ audma1: dma-controller@ec720000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -377,8 +407,8 @@ usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH - 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; power-domains = <&cpg_clocks>; @@ -389,8 +419,8 @@ usb_dmac1: dma-controller@e65b0000 { compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH - 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; power-domains = <&cpg_clocks>; @@ -404,7 +434,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -416,7 +446,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -428,7 +458,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -440,7 +470,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -452,7 +482,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6520000 0 0x40>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -465,7 +495,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6528000 0 0x40>; - interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -478,7 +508,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; @@ -491,7 +521,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; @@ -504,7 +534,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; @@ -520,7 +550,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -533,7 +563,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; @@ -544,7 +574,7 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; @@ -555,7 +585,7 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; @@ -564,11 +594,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -576,11 +607,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -588,11 +620,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -600,11 +633,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -612,11 +646,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -624,11 +659,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -636,11 +672,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -648,11 +685,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -660,11 +698,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -672,11 +711,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -684,11 +725,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -696,11 +739,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -708,11 +753,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -720,11 +767,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -732,11 +781,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -744,11 +795,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -756,11 +809,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -768,11 +823,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -782,7 +839,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7791"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -795,7 +852,7 @@ compatible = "renesas,etheravb-r8a7791", "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -806,7 +863,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee300000 0 0x2000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -815,16 +872,16 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee500000 0 0x2000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; power-domains = <&cpg_clocks>; status = "disabled"; }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7791"; + compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; @@ -859,7 +916,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -868,7 +925,7 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -877,7 +934,7 @@ vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -886,7 +943,7 @@ vsp1@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; power-domains = <&cpg_clocks>; @@ -900,7 +957,7 @@ vsp1@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; - interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; power-domains = <&cpg_clocks>; @@ -914,7 +971,7 @@ vsp1@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; power-domains = <&cpg_clocks>; @@ -930,8 +987,8 @@ reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; reg-names = "du", "lvds.0"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_DU0>, <&mstp7_clks R8A7791_CLK_DU1>, <&mstp7_clks R8A7791_CLK_LVDS0>; @@ -958,7 +1015,7 @@ can0: can@e6e80000 { compatible = "renesas,can-r8a7791"; reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -969,7 +1026,7 @@ can1: can@e6e88000 { compatible = "renesas,can-r8a7791"; reg = <0 0xe6e88000 0 0x1000>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -980,7 +1037,7 @@ jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7791"; reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_JPU>; power-domains = <&cpg_clocks>; }; @@ -1031,6 +1088,15 @@ status = "disabled"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; @@ -1432,7 +1498,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -1446,7 +1512,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; @@ -1459,7 +1525,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e10000 0 0x0064>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; @@ -1472,7 +1538,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e00000 0 0x0064>; - interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; @@ -1485,7 +1551,7 @@ xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7791"; reg = <0 0xee000000 0 0xc00>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; power-domains = <&cpg_clocks>; phys = <&usb2 1>; @@ -1494,11 +1560,11 @@ }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7791"; + compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1509,9 +1575,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1529,11 +1595,11 @@ }; pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7791"; + compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1544,9 +1610,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1564,7 +1630,7 @@ }; pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7791"; + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1577,12 +1643,12 @@ /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; - interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, - <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&cpg_clocks>; @@ -1592,8 +1658,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1601,7 +1667,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1609,8 +1675,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1618,7 +1684,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1626,8 +1692,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1635,7 +1701,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1643,8 +1709,8 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1721,52 +1787,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -1774,52 +1840,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index baa59fe84298..87e89ec9dd47 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -8,6 +8,34 @@ * kind, whether express or implied. */ +/* + * SSI-AK4643 + * + * SW1: 1: AK4643 + * 2: CN22 + * 3: ADV7511 + * + * This command is required when Playback/Capture + * + * amixer set "LINEOUT Mixer DACL" on + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + /dts-v1/; #include "r8a7793.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -31,6 +59,176 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + gpio-keys { + compatible = "gpio-keys"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW30"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW31"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW32"; + wakeup-source; + debounce-interval = <20>; + }; + key-d { + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW33"; + wakeup-source; + debounce-interval = <20>; + }; + key-e { + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_E>; + label = "SW34"; + wakeup-source; + debounce-interval = <20>; + }; + key-f { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F>; + label = "SW35"; + wakeup-source; + debounce-interval = <20>; + }; + key-g { + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_G>; + label = "SW36"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + label = "LED6"; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + label = "LED7"; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + label = "LED8"; + }; + }; + + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + + rsnd_ak4643: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7793_CLK_DU0>, + <&mstp7_clks R8A7793_CLK_DU1>, + <&mstp7_clks R8A7793_CLK_LVDS0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + lvds_connector: endpoint { + }; + }; + }; }; &extal_clk { @@ -38,6 +236,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + + du_pins: du { + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + renesas,function = "du"; + }; + scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; @@ -48,6 +259,11 @@ renesas,function = "scif1"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -62,6 +278,16 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + sound_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + sound_clk_pins: sound_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; ðer { @@ -98,6 +324,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -136,3 +367,76 @@ }; }; }; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <100000>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + eeprom@50 { + compatible = "renesas,r1ex24002", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src2 &dvc0>; + capture = <&ssi1 &src3 &dvc1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index aef9e69d6c26..b48215945241 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -19,6 +19,15 @@ #size-cells = <2>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; spi0 = &qspi; }; @@ -42,9 +51,35 @@ < 937500 1000000>, < 750000 1000000>, < 375000 1000000>; + next-level-cache = <&L2_CA15>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -54,13 +89,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -73,7 +108,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -86,7 +121,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -99,7 +134,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -112,7 +147,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -125,7 +160,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -138,7 +173,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 32>; @@ -151,7 +186,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055800 0 0x50>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 224 26>; @@ -161,27 +196,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7793", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7793_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -194,14 +232,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -216,44 +254,39 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7793_CLK_IRQC>; power-domains = <&cpg_clocks>; }; - pfc: pfc@e6060000 { - compatible = "renesas,pfc-r8a7793"; - reg = <0 0xe6060000 0 0x250>; - }; - dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -269,22 +302,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -297,12 +330,190 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + /* The memory map in the User's Manual maps the cores to bus numbers */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C0>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C1>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C2>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C3>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C4>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C5>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + }; + scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -310,11 +521,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -322,11 +534,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -334,11 +547,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -346,11 +560,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -358,11 +573,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -370,11 +586,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -382,11 +599,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -394,11 +612,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -406,11 +625,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -418,11 +639,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -430,11 +653,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -442,11 +667,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -454,11 +681,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -466,11 +695,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -478,11 +709,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -490,11 +723,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -502,11 +737,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -516,7 +753,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7793"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7793_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -528,7 +765,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -544,8 +781,8 @@ reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; reg-names = "du", "lvds.0"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_DU0>, <&mstp7_clks R8A7793_CLK_DU1>, <&mstp7_clks R8A7793_CLK_LVDS0>; @@ -583,6 +820,38 @@ clock-output-names = "extal"; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency clocks by + * default. Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7793-cpg-clocks", @@ -671,6 +940,14 @@ clock-mult = <1>; clock-output-names = "p"; }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; rclk_clk: rclk_clk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; @@ -770,10 +1047,11 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&extal_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>; #clock-cells = <1>; - clock-indices = <R8A7793_CLK_THERMAL>; - clock-output-names = "thermal"; + clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1 + R8A7793_CLK_THERMAL>; + clock-output-names = "audmac0", "audmac1", "thermal"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7793-mstp-clocks", @@ -820,19 +1098,61 @@ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cpg_clocks R8A7793_CLK_QSPI>; + <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, + <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6 R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD + R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5 + R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 + R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 + R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 >; clock-output-names = "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "qspi_mod"; + "qspi_mod", "i2c5", "i2c6", "i2c4", + "i2c3", "i2c2", "i2c1", "i2c0"; + }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_SSI_ALL + R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5 + R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0 + R8A7793_CLK_SCU_ALL + R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0 + R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0 + R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5 + R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-ctu1-mix1", "scu-ctu0-mix0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -849,8 +1169,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -858,7 +1178,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -866,8 +1186,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -875,7 +1195,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -883,8 +1203,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -892,7 +1212,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -900,9 +1220,166 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>, + <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>, + <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>, + <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>, + <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>, + <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>, + <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>, + <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>, + <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>, + <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>, + <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,src { + src0: src@0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 2394e4883786..ca9bc4fff287 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -103,6 +103,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; renesas,function = "du"; @@ -113,6 +116,11 @@ renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -138,6 +146,13 @@ status = "okay"; }; +&pfc { + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -197,3 +212,47 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "system"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "user"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 5153e3af25d9..66f077a3ca41 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -64,6 +64,61 @@ states = <3300000 1 1800000 0>; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -71,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif2_pins: serial2 { renesas,groups = "scif2_data"; renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -129,6 +192,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -164,6 +232,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &mmcif0 { @@ -258,3 +358,25 @@ &usbphy { status = "okay"; }; + +&du { + status = "okay"; + + clocks = <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU0>, + <&x2_clk>, <&x3_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 6c78f1fae90f..eacb2b291361 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -40,6 +40,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + next-level-cache = <&L2_CA7>; }; cpu1: cpu@1 { @@ -47,9 +48,16 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + next-level-cache = <&L2_CA7>; }; }; + L2_CA7: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -59,13 +67,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -78,7 +86,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -91,7 +99,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -104,7 +112,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -117,7 +125,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -130,7 +138,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 28>; @@ -143,7 +151,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 26>; @@ -156,8 +164,8 @@ cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7794_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -170,14 +178,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -189,10 +197,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -200,16 +208,16 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7794_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -222,22 +230,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -253,22 +261,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -282,11 +290,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -294,11 +303,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -306,11 +316,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -318,11 +329,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -330,11 +342,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -342,11 +355,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -354,11 +368,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -366,11 +381,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -378,11 +394,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -390,11 +407,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -402,11 +421,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -414,11 +435,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -426,11 +449,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -438,11 +463,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -450,11 +477,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -462,11 +491,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -474,11 +505,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -486,11 +519,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -500,7 +535,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7794"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -509,11 +544,23 @@ status = "disabled"; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7794", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -525,7 +572,7 @@ i2c1: i2c@e6518000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -537,7 +584,7 @@ i2c2: i2c@e6530000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -549,7 +596,7 @@ i2c3: i2c@e6540000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -561,7 +608,7 @@ i2c4: i2c@e6520000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6520000 0 0x40>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -573,7 +620,7 @@ i2c5: i2c@e6528000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6528000 0 0x40>; - interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -585,7 +632,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -597,7 +644,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee100000 0 0x200>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -606,7 +653,7 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -615,7 +662,7 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -624,7 +671,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7794", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -638,7 +685,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7794"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -647,18 +694,18 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7794"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7794"; + compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -669,9 +716,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -689,11 +736,11 @@ }; pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7794"; + compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -704,9 +751,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -724,9 +771,9 @@ }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7794"; + compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; power-domains = <&cpg_clocks>; renesas,buswait = <4>; @@ -759,8 +806,8 @@ compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; reg-names = "du"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_DU0>, <&mstp7_clks R8A7794_CLK_DU0>; clock-names = "du.0", "du.1"; @@ -797,6 +844,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7794-cpg-clocks", @@ -1068,13 +1124,14 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; + clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < - R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER + R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 + R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER >; clock-output-names = - "vin1", "vin0", "ether"; + "vin1", "vin0", "etheravb", "ether"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1111,8 +1168,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1120,7 +1177,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1128,8 +1185,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1137,7 +1194,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1145,8 +1202,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1154,8 +1211,8 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 28a033666017..b3d6ec87f615 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -47,6 +47,20 @@ compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 992f9cadbc04..6251d109eff4 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,6 +46,58 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + leds: gpio-leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + label = "kylin:red:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_wake_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - SDIO_RESET_L_WL_RST + * - SDIO_RESET_L_BT_EN + */ + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,rt5616-codec"; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC1", "Microphone Jack", + "MIC2", "Microphone Jack", + "Microphone Jack", "micbias1", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -60,6 +112,20 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &emmc { status = "okay"; }; @@ -257,6 +323,19 @@ &i2c2 { status = "okay"; + + rt5616: rt5616@1b { + compatible = "rt5616"; + reg = <0x1b>; + clocks = <&cru SCLK_I2S_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; }; &sdio { @@ -264,13 +343,34 @@ broken-cd; bus-width = <4>; + cap-sd-highspeed; cap-sdio-irq; default-sample-phase = <90>; keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; non-removable; num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; +}; + +&uart0 { + status = "okay"; }; &uart2 { @@ -286,12 +386,30 @@ }; &pinctrl { + leds { + led_ctl: led-ctl { + rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; + sdio { + bt_wake_h: bt-wake-h { + rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sleep { global_pwroff: global-pwroff { rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index b9567c1e0687..d0f4bb7e1e50 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -60,6 +60,7 @@ serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; + spi = &spi; }; memory { @@ -94,7 +95,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -105,6 +106,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -161,7 +163,7 @@ }; usb_otg: usb@10180000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -176,7 +178,7 @@ }; usb_host: usb@101c0000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x101c0000 0x40000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -186,6 +188,27 @@ status = "disabled"; }; + emac: ethernet@10200000 { + compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + reg = <0x10200000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + rockchip,grf = <&grf>; + clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref", "macclk"; + /* + * Fix the emac parent clock is DPLL instead of APLL. + * since that will cause some unstable things if the cpufreq + * is working. (e.g: the accurate 50MHz what mac_ref need) + */ + assigned-clocks = <&cru SCLK_MACPLL>; + assigned-clock-parents = <&cru PLL_DPLL>; + max-speed = <100>; + phy-mode = "rmii"; + status = "disabled"; + }; + sdmmc: dwmmc@10214000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -211,7 +234,7 @@ }; emmc: dwmmc@1021c000 { - compatible = "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; broken-cd; @@ -241,8 +264,8 @@ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; dmas = <&pdma 0>, <&pdma 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -327,7 +350,7 @@ }; i2c1: i2c@20056000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x20056000 0x1000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -340,7 +363,7 @@ }; i2c2: i2c@2005a000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x2005a000 0x1000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -395,7 +418,7 @@ }; i2c0: i2c@20072000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x20072000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -407,6 +430,21 @@ status = "disabled"; }; + spi: spi@20074000 { + compatible = "rockchip,rockchip-spi"; + reg = <0x20074000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; + clock-names = "apb-pclk","spi_pclk"; + dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3036-pinctrl"; rockchip,grf = <&grf>; @@ -556,6 +594,24 @@ }; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ + <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ + <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ + <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ + <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ + <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ + <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ + <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ + <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, @@ -579,12 +635,12 @@ i2s { i2s_bus: i2s-bus { - rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>, - <1 1 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_1 &pcfg_pull_none>, - <1 3 RK_FUNC_1 &pcfg_pull_none>, - <1 4 RK_FUNC_1 &pcfg_pull_none>, - <1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>, + <1 1 RK_FUNC_1 &pcfg_pull_default>, + <1 2 RK_FUNC_1 &pcfg_pull_default>, + <1 3 RK_FUNC_1 &pcfg_pull_default>, + <1 4 RK_FUNC_1 &pcfg_pull_default>, + <1 5 RK_FUNC_1 &pcfg_pull_default>; }; }; @@ -618,5 +674,29 @@ }; /* no rts / cts for uart2 */ }; + + spi { + spi_txd:spi-txd { + rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; + }; + + spi_rxd:spi-rxd { + rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>; + }; + + spi_clk:spi-clk { + rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>; + }; + + spi_cs0:spi-cs0 { + rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>; + + }; + + spi_cs1:spi-cs1 { + rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>; + + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 38c91a839795..6d2a5b3a84a8 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -53,6 +53,18 @@ reg = <0x60000000 0x40000000>; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vcc_sd0: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,7 +86,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; button@1 { @@ -82,7 +94,6 @@ linux,code = <104>; label = "GPIO Key Vol-"; linux,input-type = <1>; - gpio-key,wakeup = <0>; debounce-interval = <100>; }; /* VOL+ comes somehow thru the ADC */ @@ -203,6 +214,10 @@ disable-wp; }; +&pwm3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 7cdc308bfac5..a2b763e949b4 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -52,6 +52,18 @@ reg = <0x60000000 0x40000000>; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -194,6 +206,10 @@ }; }; +&pwm3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 341c1f87936a..05533005a809 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -65,7 +65,7 @@ #size-cells = <0>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; @@ -74,6 +74,18 @@ }; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vsys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vsys"; @@ -431,6 +443,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_25>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 58bac5053858..cb0a552e0b18 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -61,11 +61,13 @@ reg = <0x0>; operating-points = < /* kHz uV */ - 1008000 1075000 - 816000 1025000 - 600000 1025000 - 504000 1000000 - 312000 975000 + 1416000 1300000 + 1200000 1175000 + 1008000 1125000 + 816000 1125000 + 600000 1100000 + 504000 1100000 + 312000 1075000 >; clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -188,6 +190,16 @@ clock-names = "timer", "pclk"; }; + tsadc: tsadc@20060000 { + compatible = "rockchip,rk3066-tsadc"; + reg = <0x20060000 0x100>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "saradc", "apb_pclk"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + status = "disabled"; + }; + usbphy: phy { compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy"; rockchip,grf = <&grf>; @@ -200,6 +212,7 @@ reg = <0x17c>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -207,6 +220,7 @@ reg = <0x188>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 66fa87d1e2c2..0b6924c97b6b 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -63,7 +63,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 348d46b7ada5..9271833958f9 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -171,6 +171,7 @@ reg = <0x10c>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -178,6 +179,7 @@ reg = <0x11c>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi index 119ff12ab440..4dae42a01509 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -96,7 +96,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4faabdb65868..78d47f7d2938 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -110,7 +110,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 4e3fd9aefe34..98c586a43c73 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -91,7 +91,7 @@ #size-cells = <0>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; @@ -408,6 +408,11 @@ output-low; }; + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + act8846 { pwr_hold: pwr-hold { rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; @@ -457,6 +462,25 @@ }; sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + sdmmc_pwr: sdmmc-pwr { rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 65c475642d5a..2ff9689d2e1b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -74,7 +74,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 17f13c73fe5e..510a1d0d7abb 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -73,7 +73,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1ece66f3e162..e1ee9f949035 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -61,6 +61,31 @@ clock-output-names = "ext_gmac"; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcc_io>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vccio_pmu>; + gpio30-supply = <&vccio_pmu>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <150>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -85,6 +110,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index c5453a0b07fc..dd3ad2e93a6d 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -49,6 +49,22 @@ stdout-path = "serial2:115200n8"; }; + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + label = "rock2:green:state1"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + label = "rock2:blue:state2"; + linux,default-trigger = "mmc0"; + }; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; @@ -70,6 +86,15 @@ #sound-dai-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + }; + vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -95,6 +120,21 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -119,7 +159,7 @@ }; &i2c0 { - hym8563@51 { + hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; @@ -161,6 +201,12 @@ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &spdif { diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 136d650dd05f..610769d99522 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -108,7 +108,7 @@ lid { label = "Lid"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ debounce-interval = <1>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index cb27a8f5a8e2..412809c60d01 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -64,7 +64,7 @@ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -340,11 +340,6 @@ i2c-scl-rising-time-ns = <1000>; }; -&power { - assigned-clocks = <&cru SCLK_EDP_24M>; - assigned-clock-parents = <&xin24m>; -}; - &pwm1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 8ac49f3efc17..31f7e20ef418 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -134,7 +134,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -145,6 +145,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -155,6 +156,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; status = "disabled"; @@ -166,6 +168,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; }; @@ -630,6 +633,9 @@ #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&cru SCLK_EDP_24M>; + assigned-clock-parents = <&xin24m>; + /* * Note: Although SCLK_* are the working clocks * of device without including on the NOC, needed for @@ -815,6 +821,10 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopb>; }; + vopb_out_mipi: endpoint@2 { + reg = <2>; + remote-endpoint = <&mipi_in_vopb>; + }; }; }; @@ -848,6 +858,10 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopl>; }; + vopl_out_mipi: endpoint@2 { + reg = <2>; + remote-endpoint = <&mipi_in_vopl>; + }; }; }; @@ -861,6 +875,37 @@ status = "disabled"; }; + mipi_dsi: mipi@ff960000 { + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0xff960000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; + clock-names = "ref", "pclk"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; @@ -926,6 +971,7 @@ reg = <0x320>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -933,6 +979,7 @@ reg = <0x334>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy2: usb-phy2 { @@ -940,6 +987,7 @@ reg = <0x348>; clocks = <&cru SCLK_OTGPHY2>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 99eeea70223b..99bbcc2c9b89 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -67,7 +67,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -78,6 +78,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; }; @@ -88,6 +89,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; status = "disabled"; @@ -99,6 +101,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA2>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index aa64faa72970..da24ab570b0e 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -257,7 +257,7 @@ linux,code = <KEY_POWER>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -268,7 +268,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index 3b76eeeb8410..0a33d402138e 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -239,7 +239,7 @@ linux,code = <KEY_POWER>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -250,7 +250,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index da7d210df670..54fcc3fc82e2 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -59,7 +59,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <8>; samsung,keypad-num-columns = <8>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 8344a0ee2b86..ffc36bd24d2f 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -130,7 +130,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; pdma0: dma@e0900000 { diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index 1afe24629d1f..b0c912feaa2f 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -90,7 +90,7 @@ #define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) #define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) #define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) -#define PIN_PA15 14 +#define PIN_PA15 15 #define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) #define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) #define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 3f750f6170f2..78996bdbd3df 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -88,12 +88,6 @@ #clock-cells = <0>; clock-frequency = <0>; }; - - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; }; ns_sram: sram@00200000 { @@ -263,6 +257,44 @@ cache-level = <2>; }; + nand0: nand@80000000 { + compatible = "atmel,sama5d2-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < /* EBI CS3 */ + 0x80000000 0x08000000 + /* SMC PMECC regs */ + 0xf8014070 0x00000490 + /* SMC PMECC Error Location regs */ + 0xf8014500 0x00000200 + /* ROM Galois tables */ + 0x00040000 0x00018000 + >; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + atmel,has-pmecc; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + status = "disabled"; + + nfc@c0000000 { + compatible = "atmel,sama5d4-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < /* NFC Command Registers */ + 0xc0000000 0x08000000 + /* NFC HSMC regs */ + 0xf8014000 0x00000070 + /* NFC SRAM banks */ + 0x00100000 0x00100000 + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -880,6 +912,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>; + dma-names = "tx", "rx"; clocks = <&uart0_clk>; clock-names = "usart"; status = "disabled"; @@ -889,6 +928,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>; + dma-names = "tx", "rx"; clocks = <&uart1_clk>; clock-names = "usart"; status = "disabled"; @@ -898,6 +944,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(40))>; + dma-names = "tx", "rx"; clocks = <&uart2_clk>; clock-names = "usart"; status = "disabled"; @@ -1016,6 +1069,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(41))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(42))>; + dma-names = "tx", "rx"; clocks = <&uart3_clk>; clock-names = "usart"; status = "disabled"; @@ -1024,6 +1084,13 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(43))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(44))>; + dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&uart4_clk>; clock-names = "usart"; @@ -1085,6 +1152,18 @@ status = "disabled"; }; + adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b8032bca4621..db1151c18466 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1342,7 +1342,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 3a6056f9f0d2..bf825ca4f6f7 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -58,7 +58,7 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; - interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_a3sm>; arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; @@ -70,8 +70,8 @@ sbsc2: memory-controller@fb400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfb400000 0x400>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; power-domains = <&pd_a4bc1>; }; @@ -79,22 +79,22 @@ sbsc1: memory-controller@fe400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfe400000 0x400>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; power-domains = <&pd_a4bc0>; }; pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, - <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; }; cmt1: timer@e6138000 { compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; reg = <0xe6138000 0x200>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -113,14 +113,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH - 0 2 IRQ_TYPE_LEVEL_HIGH - 0 3 IRQ_TYPE_LEVEL_HIGH - 0 4 IRQ_TYPE_LEVEL_HIGH - 0 5 IRQ_TYPE_LEVEL_HIGH - 0 6 IRQ_TYPE_LEVEL_HIGH - 0 7 IRQ_TYPE_LEVEL_HIGH - 0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -135,14 +135,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH - 0 10 IRQ_TYPE_LEVEL_HIGH - 0 11 IRQ_TYPE_LEVEL_HIGH - 0 12 IRQ_TYPE_LEVEL_HIGH - 0 13 IRQ_TYPE_LEVEL_HIGH - 0 14 IRQ_TYPE_LEVEL_HIGH - 0 15 IRQ_TYPE_LEVEL_HIGH - 0 16 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -157,14 +157,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH - 0 18 IRQ_TYPE_LEVEL_HIGH - 0 19 IRQ_TYPE_LEVEL_HIGH - 0 20 IRQ_TYPE_LEVEL_HIGH - 0 21 IRQ_TYPE_LEVEL_HIGH - 0 22 IRQ_TYPE_LEVEL_HIGH - 0 23 IRQ_TYPE_LEVEL_HIGH - 0 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -179,14 +179,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH - 0 26 IRQ_TYPE_LEVEL_HIGH - 0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH - 0 31 IRQ_TYPE_LEVEL_HIGH - 0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -197,10 +197,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH - 0 168 IRQ_TYPE_LEVEL_HIGH - 0 169 IRQ_TYPE_LEVEL_HIGH - 0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks SH73A0_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -211,10 +211,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH - 0 52 IRQ_TYPE_LEVEL_HIGH - 0 53 IRQ_TYPE_LEVEL_HIGH - 0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -225,10 +225,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH - 0 172 IRQ_TYPE_LEVEL_HIGH - 0 173 IRQ_TYPE_LEVEL_HIGH - 0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -239,10 +239,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH - 0 184 IRQ_TYPE_LEVEL_HIGH - 0 185 IRQ_TYPE_LEVEL_HIGH - 0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -253,10 +253,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH - 0 188 IRQ_TYPE_LEVEL_HIGH - 0 189 IRQ_TYPE_LEVEL_HIGH - 0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC4>; power-domains = <&pd_c5>; status = "disabled"; @@ -265,8 +265,8 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH - 0 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -276,7 +276,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e20000 0x0064>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -287,7 +287,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e10000 0x0064>; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -298,7 +298,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e00000 0x0064>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -309,7 +309,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6c90000 0x0064>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -320,9 +320,9 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH - 0 84 IRQ_TYPE_LEVEL_HIGH - 0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -333,8 +333,8 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH - 0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; @@ -345,8 +345,8 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH - 0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; @@ -357,9 +357,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -367,9 +367,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -377,9 +377,9 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -387,9 +387,9 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -397,9 +397,9 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -407,9 +407,9 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -417,9 +417,9 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -427,9 +427,9 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -437,9 +437,9 @@ scifb: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -579,7 +579,7 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupts = <0 146 0x4>; + interrupts = <GIC_SPI 146 0x4>; power-domains = <&pd_a4mp>; status = "disabled"; }; @@ -591,7 +591,7 @@ #size-cells = <1>; ranges = <0 0 0x20000000>; reg = <0xfec10000 0x400>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&zb_clk>; power-domains = <&pd_a4s>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 3ed4abdaaa9c..b89cbde3b289 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -69,7 +69,7 @@ ranges; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -656,6 +656,26 @@ status = "disabled"; }; + eccmgr: eccmgr@ffd08140 { + compatible = "altr,socfpga-ecc-manager"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + l2-ecc@ffd08140 { + compatible = "altr,socfpga-l2-ecc"; + reg = <0xffd08140 0x4>; + interrupts = <0 36 1>, <0 37 1>; + }; + + ocram-ecc@ffd08144 { + compatible = "altr,socfpga-ocram-ecc"; + reg = <0xffd08144 0x4>; + iram = <&ocram>; + interrupts = <0 178 1>, <0 179 1>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index cce9e50acf68..1c5e139e4d05 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -63,7 +63,7 @@ ranges; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index e48857249ce7..84101e4eebbf 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -161,7 +161,7 @@ linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c611f5606dfe..6565f3cb866f 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -223,7 +223,7 @@ linux,code = <0x100>; gpios = <&gpio1 1 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0aa6fef5ce22..0d0da1f65f0e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -141,7 +141,7 @@ linux,code = <0x100>; gpios = <&stmpegpio 3 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; button@2 { @@ -149,7 +149,7 @@ linux,code = <0x200>; gpios = <&stmpegpio 2 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index b7b4211c5353..55f9d0cc90f3 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -37,7 +37,6 @@ }; soc { - /* Add Synaptics touch screen, TC35893 keypad etc here */ i2c@80004000 { tc35893@44 { compatible = "toshiba,tc35893"; @@ -159,6 +158,33 @@ vddio-supply = <&db8500_vsmps2_reg>; }; }; + + i2c@80110000 { + synaptics@4b { + /* Synaptics RMI4 TM1217 touchscreen */ + compatible = "syna,rmi4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4b>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&synaptics_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + rmi-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; + }; + pinctrl { /* Pull up this GPIO pin */ tc35893 { @@ -212,6 +238,15 @@ }; }; }; + synaptics { + synaptics_tvk_mode: synaptics_tvk { + /* Touchscreen uses GPIO 84 */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d0c743853318..e2be53343064 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -127,22 +127,14 @@ }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { - /* MCCLK */ - pins = "GPIO8_B10"; - ste,output = <0>; - }; - mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13", "GPIO23_D15"; - ste,output = <1>; - }; - mmcsd_default_cfg3 { - /* MCCMD, MCDAT3-0, MCMSFBCLK */ - pins = "GPIO9_A10", "GPIO11_B11", - "GPIO12_A11", "GPIO13_C12", - "GPIO14_B12", "GPIO24_C15"; - ste,input = <1>; + /* + * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 + * MCCMD, MCDAT3-0, MCMSFBCLK + */ + pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12", + "GPIO16_C13", "GPIO23_D15", "GPIO24_C15"; + ste,output = <2>; }; }; }; @@ -729,7 +721,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -802,10 +794,21 @@ clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; - max-frequency = <48000000>; + max-frequency = <400000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + full-pwr-cycle; + /* + * The STw4811 circuit used with the Nomadik strictly + * requires that all of these signal direction pins be + * routed and used for its 4-bit levelshifter. + */ + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 9c73ac2842ad..2f5107ffeef0 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -384,7 +384,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 6964fc9e97cf..6bfc5959dac3 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -58,18 +58,68 @@ }; memory { - reg = <0xc0000000 0x2000000>; + reg = <0x00000000 0x2000000>; }; aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiog 6 1>; + linux,default-trigger = "heartbeat"; + }; + orange { + gpios = <&gpiog 7 1>; + }; + red { + gpios = <&gpiog 10 1>; + }; + blue { + gpios = <&gpiog 12 1>; + }; + }; + + usbotg_hs_phy: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 30>; + clock-names = "main_clk"; + }; }; &clk_hse { clock-frequency = <25000000>; }; +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_mii>; + pinctrl-names = "default"; + phy-mode = "mii-id"; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index f0b731db6f53..01408073dd53 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -64,6 +64,17 @@ aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpiog 14 0>; + }; + green { + gpios = <&gpiog 13 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &clk_hse { @@ -71,5 +82,7 @@ }; &usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 5e1e234e8c0a..35df462559ca 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -46,6 +46,7 @@ */ #include "armv7-m.dtsi" +#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> / { clocks { @@ -57,6 +58,8 @@ }; soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; @@ -168,6 +171,160 @@ status = "disabled"; }; + syscfg: system-config@40013800 { + compatible = "syscon"; + reg = <0x40013800 0x400>; + }; + + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x40020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 0>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 1>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 2>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 3>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 4>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 5>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 6>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 7>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 8>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 9>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 10>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg_hs@0 { + pins { + pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, + <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>, + <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>, + <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>, + <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>, + <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>, + <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>, + <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>, + <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>, + <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>, + <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>, + <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ethernet0_mii: mii@0 { + pins { + pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, + <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, + <STM32F429_PC2_FUNC_ETH_MII_TXD2>, + <STM32F429_PB8_FUNC_ETH_MII_TXD3>, + <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>, + <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, + <STM32F429_PA2_FUNC_ETH_MDIO>, + <STM32F429_PC1_FUNC_ETH_MDC>, + <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, + <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, + <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, + <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>, + <STM32F429_PH6_FUNC_ETH_MII_RXD2>, + <STM32F429_PH7_FUNC_ETH_MII_RXD3>; + slew-rate = <2>; + }; + }; + }; + rcc: rcc@40023810 { #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; @@ -175,6 +332,62 @@ clocks = <&clk_hse>; }; + dma1: dma-controller@40026000 { + compatible = "st,stm32-dma"; + reg = <0x40026000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&rcc 0 21>; + #dma-cells = <4>; + }; + + dma2: dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&rcc 0 22>; + #dma-cells = <4>; + st,mem2mem; + }; + + ethernet0: dwmac@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>, <62>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "tx-clk", "rx-clk"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + dma-ranges; + status = "disabled"; + }; + + usbotg_hs: usb@40040000 { + compatible = "snps,dwc2"; + dma-ranges; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 29>; + clock-names = "otg"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts new file mode 100644 index 000000000000..e911af836471 --- /dev/null +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -0,0 +1,75 @@ +/* + * Copyright 2016 - Lee Jones <lee.jones@linaro.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" + +/ { + model = "STMicroelectronics STM32F469i-DISCO board"; + compatible = "st,stm32f469i-disco", "st,stm32f469"; + + chosen { + bootargs = "root=/dev/ram rdinit=/linuxrc"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x800000>; + }; + + aliases { + serial0 = &usart3; + }; +}; + +&clk_hse { + clock-frequency = <8000000>; +}; + +&usart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 53660894ea95..023b03efa5ff 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Chuwi V7 CW0825"; @@ -88,6 +89,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5306de4: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 43f58fbe161c..9103864fef90 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -87,6 +87,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ status = "okay"; @@ -102,7 +126,17 @@ allwinner,pins = "PH6"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 77c31dab86b1..04b0d2d1ae6c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -48,6 +48,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "INet-97F Rev 02"; @@ -93,6 +94,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index ca49b0d0ce1e..bba4f9cf9bf5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -253,6 +253,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 985e15503378..4e798f014c99 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -1,5 +1,6 @@ /* * Copyright 2015 Josef Gajdusek <atx@atx.name> + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,22 +43,11 @@ /dts-v1/; #include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-itead-core-common.dtsi" / { model = "Iteaduino Plus A10"; compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ahci { @@ -65,18 +55,6 @@ status = "okay"; }; -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -89,12 +67,7 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - axp209: pmic@34 { - reg = <0x34>; interrupts = <0>; }; }; @@ -135,68 +108,13 @@ status = "okay"; }; -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - ®_ahci_5v { status = "okay"; }; -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>, <&spi0_cs0_pins_a>; status = "okay"; }; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ddf0683cbc6a..ee46ea854832 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -44,6 +44,7 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "MK802"; @@ -84,7 +85,25 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb2_vbus_pin_mk802: usb2_vbus_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -93,6 +112,10 @@ }; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -109,7 +132,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 530ab28e9ca2..f6898c6b84d4 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -70,6 +70,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index b6ad7850fac6..1867af24ff52 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -709,6 +709,16 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc3_8bit_emmc_pins: mmc3@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc3"; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index ea69fb8ad4d8..4ec0c8679b2e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -61,12 +61,14 @@ }; /* eMMC on core board */ -&mmc2 { +&mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-0 = <&mmc3_8bit_emmc_pins>; vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts new file mode 100644 index 000000000000..661c21d9bdbd --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-itead-core-common.dtsi" + +/ { + model = "Itead Ibox A20"; + compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_itead_core>; + + green { + label = "itead_core:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + blue { + label = "itead_core:blue:usr"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + axp209: pmic@34 { + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_itead_core: led_pins@0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts new file mode 100644 index 000000000000..5ee43d8bf174 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -0,0 +1,287 @@ +/* + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Lamobo R1"; + compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_lamobo_r1>; + + green { + label = "lamobo_r1:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_lamobo_r1>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PB3"; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_lamobo_r1: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +#include "axp209.dtsi" + +®_ahci_5v { + gpio = <&pio 1 3 0>; /* PB3 */ + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index c9e648d17a1e..90ff4a267025 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -53,6 +53,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "mk808c"; @@ -125,6 +126,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -145,7 +170,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b2cfa2..23aacce4d6c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -198,6 +198,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -219,6 +223,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -254,6 +272,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -268,7 +290,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 6f88fb0ddbc7..7e05e09e61c7 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -381,7 +381,7 @@ allwinner,pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", - "PC15"; + "PC15", "PC16"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 13ce68f06dd6..fef6abc0a703 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -68,7 +68,7 @@ }; &lradc { - vref-supply = <®_vcc3v0>; + vref-supply = <®_dcdc1>; status = "okay"; button@200 { @@ -96,7 +96,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -106,13 +106,16 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; &mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; /* eMMC is missing pull-ups */ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; @@ -132,6 +135,76 @@ &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &uart0 { diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts new file mode 100644 index 000000000000..342e1d33fa1c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; + compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644 index 000000000000..88b1e0970b8d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Cubietech Cubietruck Plus"; + compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi new file mode 100644 index 000000000000..d3473f81b12f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -0,0 +1,228 @@ +/* + * Copyright 2015 Vishnu Patekar + * + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + + cpu@100 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@101 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu@102 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@103 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* TODO: PRCM block has a mux for this. */ + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + /* + * This is called "internal OSC" in some places. + * It is an internal RC-based oscillator. + * TODO: Its controls are in the PRCM block. + */ + osc16M: osc16M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "osc16M"; + }; + + osc16Md512: osc16Md512_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <512>; + clock-mult = <1>; + clocks = <&osc16M>; + clock-output-names = "osc16M-d512"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01c20800 0x400>; + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB9", "PB10"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index e67df590535f..79f40c3e6101 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> / { @@ -58,6 +59,62 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + status_led { + label = "orangepi-plus:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + + pwr_led { + label = "orangepi-plus:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "sw4"; + + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4@0 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL03"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &mmc0 { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 1524130e43c9..dadb7f60c062 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -276,6 +276,33 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5>; clock-output-names = "mbus"; }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; + + ir_clk: ir_clk@01f01454 { + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01f01454 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; }; soc { @@ -359,7 +386,7 @@ gpio-controller; #gpio-cells = <3>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PA4", "PA5"; @@ -493,5 +520,40 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_reset 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL11"; + allwinner,function = "s_cir_rx"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 1a69231d2da5..9d2b7e2f5975 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -56,7 +56,6 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - /* backlight is powered by AXP223 DC1SW */ }; chosen { @@ -67,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -92,6 +91,82 @@ &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &r_uart { @@ -99,3 +174,7 @@ pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 382bd9fc5647..eb2ccd0a3bd5 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -111,9 +111,15 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + &r_ir { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index c0060e4f7379..d7a20d92b114 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -109,17 +109,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; -}; - -&i2c3_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &ohci0 { status = "okay"; }; @@ -174,9 +163,15 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_optimus>; gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ @@ -206,17 +201,6 @@ status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&uart4_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &usbphy1 { phy-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index e838f206f2a0..f68b3242b33a 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -543,7 +543,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, <&mmc0_clk 1>, <&mmc0_clk 2>; @@ -557,7 +557,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, <&mmc1_clk 1>, <&mmc1_clk 2>; @@ -571,7 +571,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, <&mmc2_clk 1>, <&mmc2_clk 2>; @@ -585,7 +585,7 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, <&mmc3_clk 1>, <&mmc3_clk 2>; @@ -704,7 +704,8 @@ mmc2_8bit_pins: mmc2_8bit { allwinner,pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15"; + "PC13", "PC14", "PC15", + "PC16"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi new file mode 100644 index 000000000000..2565d5137a17 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -0,0 +1,136 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 000000000000..a63272422d76 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 6fd7efbead34..d23320af5ea7 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -148,7 +148,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 21b02874bea3..7a556b92e55c 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -66,7 +66,7 @@ }; iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 3 0 0x200000>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index e712c0af149b..47e4a115adef 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -65,7 +65,7 @@ }; iofpga@7,00000000 { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 7 0 0x20000>; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a9ceb5bac40e..4539f8d909a5 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -629,5 +629,10 @@ status = "disabled"; }; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 9efd16cb2859..307ed201d658 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index cb64209bca08..e96959b2e67a 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index abf5d238ae04..be6a986bbbd8 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index b9f2522012e8..7250c1eac7f9 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -29,7 +29,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index 16c9cacd668d..d9e0f3e70671 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -29,10 +29,15 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; + usb_phy0: phy0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio0 46 1>; + }; }; &clkc { @@ -56,3 +61,9 @@ &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 2dc6da70ae59..d7ed252708c5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -16,7 +16,7 @@ */ #include <linux/module.h> #include <linux/kernel.h> - +#include <asm/div64.h> #include <asm/hardware/icst.h> /* @@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div); unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) { - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); + u64 dividend = p->ref * 2 * (u64)(vco.v + 8); + u32 divisor = (vco.r + 2) * p->s2div[vco.s]; + + do_div(dividend, divisor); + return (unsigned long)dividend; } EXPORT_SYMBOL(icst_hz); @@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq) if (f > p->vco_min && f <= p->vco_max) break; + i++; } while (i < 8); if (i >= 8) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 3d224941b541..fb0a0a4dfea4 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1290,7 +1290,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) struct sa1111_dev *dev = SA1111_DEV(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); - return dev->devid & drv->devid; + return !!(dev->devid & drv->devid); } static int sa1111_bus_suspend(struct device *dev, pm_message_t state) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index e0df333202b8..9ba45ade5f48 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -69,7 +69,7 @@ static void __scoop_gpio_set(struct scoop_dev *sdev, static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; spin_lock_irqsave(&sdev->scoop_lock, flags); @@ -81,7 +81,7 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); /* XXX: I'm unsure, but it seems so */ return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1))); @@ -90,7 +90,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) static int scoop_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; unsigned short gpcr; @@ -108,7 +108,7 @@ static int scoop_gpio_direction_input(struct gpio_chip *chip, static int scoop_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { - struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + struct scoop_dev *sdev = gpiochip_get_data(chip); unsigned long flags; unsigned short gpcr; @@ -224,7 +224,7 @@ static int scoop_probe(struct platform_device *pdev) devptr->gpio.direction_input = scoop_gpio_direction_input; devptr->gpio.direction_output = scoop_gpio_direction_output; - ret = gpiochip_add(&devptr->gpio); + ret = gpiochip_add_data(&devptr->gpio, devptr); if (ret) goto err_gpio; } diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 72def201c4fd..1ef69fcbdf2e 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -6,13 +6,13 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y -CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y @@ -26,7 +26,6 @@ CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y CONFIG_CC_STACKPROTECTOR_REGULAR=y CONFIG_ARCH_MULTI_V6=y -# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y @@ -107,8 +106,10 @@ CONFIG_STAGING=y CONFIG_MAILBOX=y CONFIG_BCM2835_MBOX=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_RASPBERRYPI_POWER=y CONFIG_PWM=y CONFIG_PWM_BCM2835=y +CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -142,7 +143,5 @@ CONFIG_TEST_KSTRTOX=y CONFIG_KGDB=y CONFIG_KGDB_KDB=y CONFIG_STRICT_DEVMEM=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 18c311ae1113..0b9211b2b73b 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -166,7 +166,6 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA1=m diff --git a/arch/arm/configs/dram_0x00000000.config b/arch/arm/configs/dram_0x00000000.config new file mode 100644 index 000000000000..db96dcb420ce --- /dev/null +++ b/arch/arm/configs/dram_0x00000000.config @@ -0,0 +1 @@ +CONFIG_DRAM_BASE=0x00000000 diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 24dcd2bb1215..6ffd7e76f3ce 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -26,12 +26,14 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -193,7 +195,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8997=y CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_MAX77802=y CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y @@ -238,7 +239,12 @@ CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_DEV_S5P=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_7x14=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index d3a8018639de..9083399a8ab1 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -6,6 +6,7 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y +CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -24,14 +25,12 @@ CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y -CONFIG_MACH_EUKREA_CPUIMX25SD=y -CONFIG_SOC_IMX25=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y -CONFIG_MACH_MXT_TD60=y CONFIG_MACH_IMX27_DT=y +CONFIG_SOC_IMX25=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -88,6 +87,7 @@ CONFIG_KEYBOARD_IMX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_MX25=y CONFIG_TOUCHSCREEN_MC13783=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m @@ -107,6 +107,7 @@ CONFIG_HWMON=m CONFIG_SENSORS_MC13783_ADC=m CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_MFD_MX25_TSADC=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -169,11 +170,11 @@ CONFIG_RTC_DRV_IMXDI=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y -CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y +CONFIG_IIO=y +CONFIG_FSL_MX25_ADC=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y @@ -187,6 +188,5 @@ CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 2d5253dcc226..978c5deeb47c 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -47,6 +47,7 @@ CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_IMX6=y CONFIG_SMP=y +CONFIG_ARM_PSCI=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y @@ -56,6 +57,7 @@ CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_ARM_IMX6Q_CPUFREQ=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m @@ -71,7 +73,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y @@ -103,10 +104,13 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_FSL_QUADSPI=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 @@ -144,7 +148,6 @@ CONFIG_USB_RTL8152=m CONFIG_USB_USBNET=m CONFIG_USB_NET_CDC_EEM=m CONFIG_BRCMFMAC=m -CONFIG_WL_TI=y CONFIG_WL12XX=m CONFIG_WLCORE_SDIO=m # CONFIG_WILINK_PLATFORM_DATA is not set @@ -163,6 +166,7 @@ CONFIG_TOUCHSCREEN_MC13783=y CONFIG_TOUCHSCREEN_TSC2007=y CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SX8654=y +CONFIG_TOUCHSCREEN_COLIBRI_VF50=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m @@ -172,7 +176,6 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y -CONFIG_HW_RANDOM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set @@ -181,6 +184,7 @@ CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y +CONFIG_SPI_FSL_DSPI=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y @@ -191,6 +195,7 @@ CONFIG_POWER_RESET_IMX=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_IIO_HWMON=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_IMX_THERMAL=y @@ -226,7 +231,6 @@ CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_IMX=y -CONFIG_DRM_IMX_FB_HELPER=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y @@ -270,6 +274,7 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y +CONFIG_USB_FSL_USB2=y CONFIG_USB_CONFIGFS=m CONFIG_USB_CONFIGFS_SERIAL=y CONFIG_USB_CONFIGFS_ACM=y @@ -295,6 +300,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y @@ -311,15 +317,18 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y +CONFIG_FSL_EDMA=y CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y -CONFIG_FSL_EDMA=y CONFIG_STAGING=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_VF610_ADC=y CONFIG_PWM=y +CONFIG_PWM_FSL_FTM=y CONFIG_PWM_IMX=y +CONFIG_NVMEM=y +CONFIG_NVMEM_IMX_OCOTP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -327,9 +336,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set @@ -364,6 +370,7 @@ CONFIG_PROVE_LOCKING=y # CONFIG_ARM_UNWIND is not set CONFIG_SECURITYFS=y CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_CRYPTO_DEV_SAHARA=y CONFIG_CRC_CCITT=m CONFIG_CRC_T10DIF=y CONFIG_CRC7=m diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 4fa94a1f115b..652b7bd9e544 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -95,7 +95,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_NLS=y CONFIG_DEBUG_USER=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index c3058da631da..aa3af0a6b8f7 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -108,7 +108,6 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 9c93f5655248..0b02e4f43c6a 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -158,6 +158,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_S3C24XX=y CONFIG_SPI_SPIDEV=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 1f9ca4737ef6..e11d99d529ee 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 +CONFIG_BLK_DEV_INITRD=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y @@ -91,15 +92,15 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_NET_DSA_MV88E6171=y CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y -CONFIG_MWL8K=m CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y +CONFIG_MWL8K=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 314f6be2dca2..28234906a064 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -16,6 +16,8 @@ CONFIG_ARCH_MULTI_V7=y # CONFIG_ARCH_MULTI_V4 is not set CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y +CONFIG_ARCH_ARTPEC=y +CONFIG_MACH_ARTPEC6=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -33,6 +35,7 @@ CONFIG_ARCH_BCM_NSP=y CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y @@ -182,6 +185,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_BRCMNAND=y +CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_FSL_QUADSPI=m @@ -227,6 +231,7 @@ CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y +CONFIG_SYNOPSYS_DWC_ETH_QOS=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y @@ -318,6 +323,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_AT91=m +CONFIG_I2C_BCM2835=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m @@ -341,6 +347,8 @@ CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_SPI=y CONFIG_SPI_ATMEL=m +CONFIG_SPI_BCM2835=y +CONFIG_SPI_BCM2835AUX=y CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_FSL_DSPI=m @@ -363,6 +371,7 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_BCM2835=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -403,6 +412,7 @@ CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_RMOBILE=y CONFIG_POWER_AVS=y CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_NTC_THERMISTOR=m @@ -426,6 +436,7 @@ CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y @@ -467,6 +478,7 @@ CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y +CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y @@ -527,6 +539,7 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_VC4=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -559,6 +572,7 @@ CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RSRC_CARD=m +CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_SAMSUNG=m CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROIDX2=m @@ -577,6 +591,7 @@ CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y +CONFIG_USB_XHCI_RCAR=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MSM=m CONFIG_USB_EHCI_EXYNOS=y @@ -591,9 +606,12 @@ CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SUNXI=m CONFIG_USB_DWC3=y CONFIG_USB_DWC2=m CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y CONFIG_KEYSTONE_USB_PHY=y @@ -603,6 +621,7 @@ CONFIG_USB_ISP1301=y CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y +CONFIG_USB_FSL_USB2=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_ETH=m CONFIG_MMC=y @@ -621,6 +640,7 @@ CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_SDHCI_BCM2835=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y @@ -664,7 +684,6 @@ CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m -CONFIG_RTC_DRV_MAX77802=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_ST_LPC=y @@ -690,7 +709,7 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y -CONFIG_FSL_EDMA=m +CONFIG_FSL_EDMA=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y @@ -703,6 +722,7 @@ CONFIG_PL330_DMA=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y +CONFIG_DMA_BCM2835=y CONFIG_DMA_OMAP=y CONFIG_QCOM_BAM_DMA=y CONFIG_XILINX_VDMA=y @@ -749,8 +769,10 @@ CONFIG_IIO=y CONFIG_AT91_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_EXYNOS_ADC=m +CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_AK8975=y +CONFIG_RASPBERRYPI_POWER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m @@ -763,6 +785,7 @@ CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PWM_STI=m +CONFIG_PWM_BCM2835=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_PHY_BERLIN_USB=y @@ -779,6 +802,8 @@ CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_SAMSUNG_USB2=m CONFIG_NVMEM=y CONFIG_NVMEM_SUNXI_SID=y +CONFIG_BCM2835_MBOX=y +CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index af29780accdc..4562006aae68 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -92,7 +92,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_NET_DSA_MV88E6171=y CONFIG_NET_DSA_MV88E6352=y CONFIG_MV643XX_ETH=y @@ -137,6 +137,7 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SOC_CS42L51_I2C=y CONFIG_SND_SIMPLE_CARD=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index c6729bf0a8dd..dc5797a2efab 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_SPI_NOR=y +CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y @@ -109,6 +110,7 @@ CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index b47e7c6628c9..6e0f751be229 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -12,6 +12,7 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_MODULES=y @@ -141,9 +142,8 @@ CONFIG_IIO=y CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_MXS=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y +CONFIG_NVMEM=y +CONFIG_NVMEM_MXS_OCOTP=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m @@ -178,7 +178,6 @@ CONFIG_PROVE_LOCKING=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MXS_DCP=y CONFIG_CRC_ITU_T=m CONFIG_CRC7=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5427..156bc88b8523 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_KERNMEM_PERMS=y CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y @@ -144,6 +145,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_TSL2550=m CONFIG_BMP085_I2C=m CONFIG_SRAM=y +CONFIG_EEPROM_AT24=m CONFIG_SENSORS_LIS3_I2C=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y @@ -177,6 +179,7 @@ CONFIG_TI_CPTS=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y @@ -276,6 +279,7 @@ CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y @@ -286,28 +290,35 @@ CONFIG_REGULATOR_TPS65217=y CONFIG_REGULATOR_TPS65218=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_OMAP3=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_TVP5150=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y @@ -354,6 +365,11 @@ CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=m @@ -387,6 +403,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PWM=m +CONFIG_LEDS_PCA963X=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -404,7 +421,8 @@ CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y -# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IOMMU_SUPPORT=y +CONFIG_OMAP_IOMMU=y CONFIG_EXTCON=m CONFIG_EXTCON_USB_GPIO=m CONFIG_EXTCON_PALMAS=m @@ -449,6 +467,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5876ce7af130..6a5bc27538f1 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -86,7 +86,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_NET_DSA_MV88E6123=y CONFIG_MV643XX_ETH=y CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 0cb724b5c639..dc5517eaf09f 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -378,6 +378,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=m CONFIG_BATTERY_SBS=m diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig deleted file mode 100644 index 93efdcfcf98f..000000000000 --- a/arch/arm/configs/realview-smp_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_NO_HZ_FULL=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_REALVIEW=y -CONFIG_REALVIEW_DT=y -CONFIG_MACH_REALVIEW_EB=y -CONFIG_REALVIEW_EB_ARM1136=y -CONFIG_REALVIEW_EB_ARM1176=y -CONFIG_REALVIEW_EB_A9MP=y -CONFIG_REALVIEW_EB_ARM11MP=y -CONFIG_REALVIEW_EB_ARM11MP_REVB=y -CONFIG_MACH_REALVIEW_PB11MP=y -CONFIG_MACH_REALVIEW_PB1176=y -CONFIG_MACH_REALVIEW_PBA8=y -CONFIG_MACH_REALVIEW_PBX=y -CONFIG_SMP=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" -CONFIG_VFP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_ROM=y -CONFIG_MTD_PHYSMAP=y -CONFIG_ARM_CHARLCD=y -CONFIG_NETDEVICES=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -CONFIG_SMSC_PHY=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_VERSATILE=y -CONFIG_SPI=y -CONFIG_GPIOLIB=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_DRIVERS is not set -CONFIG_SND_ARMAACI=y -CONFIG_USB=y -CONFIG_USB_ISP1760=y -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_VERSATILE=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PL031=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 8f56fb3ff51d..9e77dc7b828f 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,5 +1,6 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_FULL=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_PERF_EVENTS=y @@ -21,6 +22,7 @@ CONFIG_MACH_REALVIEW_PB11MP=y CONFIG_MACH_REALVIEW_PB1176=y CONFIG_MACH_REALVIEW_PBA8=y CONFIG_MACH_REALVIEW_PBX=y +CONFIG_SMP=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -46,6 +48,8 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y CONFIG_ARM_CHARLCD=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_SMC91X=y CONFIG_SMSC911X=y @@ -74,6 +78,7 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_DRIVERS is not set CONFIG_SND_ARMAACI=y CONFIG_USB=y +CONFIG_USB_STORAGE=y CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f3142369f594..b3ade552a2a5 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -290,6 +290,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_S3C24XX=m diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index c11bab735125..afbda413d61a 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -187,6 +187,7 @@ CONFIG_AT_XDMAC=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y +CONFIG_AT91_SAMA5D2_ADC=y CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_TCB=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 969738324a5d..b7b714c3958c 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -20,7 +20,6 @@ CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y -CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y CONFIG_PCI=y @@ -163,6 +162,8 @@ CONFIG_SND_SOC_RSRC_CARD=y CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_WM8978=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_RCAR=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_R8A66597_HCD=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index f7f4e2e3cc33..753f1a5defc7 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CPUSETS=y CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -107,4 +108,3 @@ CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set CONFIG_ENABLE_DEFAULT_TRACERS=y CONFIG_DEBUG_USER=y -CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index ec5250547d14..1e5ec2a0e4cf 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -52,6 +52,7 @@ CONFIG_SERIAL_STM32_CONSOLE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index a9a81a714be4..81a1b92fd4e6 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -58,6 +58,7 @@ CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y @@ -92,15 +93,27 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_GPIO=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_RC_DEVICES=y +CONFIG_IR_SUNXI=y CONFIG_FB=y CONFIG_FB_SIMPLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SUN4I_CODEC=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 4bc870028035..0ada29d568ec 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -214,7 +214,6 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_USER=y CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=m diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56f43..da3c0428507b 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -15,6 +15,7 @@ #include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <linux/module.h> +#include <crypto/xts.h> MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); @@ -152,6 +153,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); int ret; + ret = xts_check_key(tfm, in_key, key_len); + if (ret) + return ret; + ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2); if (!ret) ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2], @@ -364,7 +369,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ce_aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -441,7 +446,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 6d685298690e..0511a6cafe24 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -13,6 +13,7 @@ #include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <linux/module.h> +#include <crypto/xts.h> #include "aes_glue.h" @@ -89,6 +90,11 @@ static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, { struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm); int bits = key_len * 4; + int err; + + err = xts_check_key(tfm, in_key, key_len); + if (err) + return err; if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 16da6380eb85..55e0e3ea9cb6 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,7 @@ generic-y += bitsperlong.h +generic-y += clkdev.h generic-y += cputime.h generic-y += current.h generic-y += early_ioremap.h @@ -23,7 +24,6 @@ generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h generic-y += seccomp.h -generic-y += sections.h generic-y += segment.h generic-y += sembuf.h generic-y += serial.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 7da5503c0591..e08d15184056 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void) u32 irqstat; asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); + dsb(sy); return irqstat; } diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index d5525bfc7e3e..9156fc303afd 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -491,7 +491,6 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; } #endif #ifdef CONFIG_DEBUG_RODATA -void mark_rodata_ro(void); void set_kernel_text_rw(void); void set_kernel_text_ro(void); #else diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h index 523315115478..524692f4acab 100644 --- a/arch/arm/include/asm/checksum.h +++ b/arch/arm/include/asm/checksum.h @@ -84,10 +84,10 @@ ip_fast_csum(const void *iph, unsigned int ihl) } static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) { - u32 lenprot = len | proto << 16; + u32 lenprot = len + proto; if (__builtin_constant_p(sum) && sum == 0) { __asm__( "adds %0, %1, %2 @ csum_tcpudp_nofold0 \n\t" @@ -121,8 +121,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, * returns a 16-bit checksum, already complemented */ static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) +csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) { return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); } @@ -144,8 +144,8 @@ __csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __ __be32 proto, __wsum sum); static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, - unsigned short proto, __wsum sum) +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, __u8 proto, __wsum sum) { return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), htonl(proto), sum)); diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h deleted file mode 100644 index 4e8a4b27d7c7..000000000000 --- a/arch/arm/include/asm/clkdev.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/clkdev.h - * - * Copyright (C) 2008 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Helper for the clk API to assist looking up a struct clk. - */ -#ifndef __ASM_CLKDEV_H -#define __ASM_CLKDEV_H - -#include <linux/slab.h> - -#ifndef CONFIG_COMMON_CLK -#ifdef CONFIG_HAVE_MACH_CLKDEV -#include <mach/clkdev.h> -#else -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) -#endif -#endif - -static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) -{ - return kzalloc(size, GFP_KERNEL); -} - -#endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index e1f07764b0d6..7d919a9b32e5 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -74,7 +74,7 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base) static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) { unsigned long long res; - unsigned int tmp = 0; + register unsigned int tmp asm("ip") = 0; if (!bias) { asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" @@ -90,12 +90,12 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias) : "r" (m), "r" (n) : "cc"); } else { - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" - "cmn %Q0, %Q1\n\t" - "adcs %R0, %R0, %R1\n\t" - "adc %Q0, %3, #0" - : "=&r" (res) - : "r" (m), "r" (n), "r" (tmp) + asm ( "umull %Q0, %R0, %Q2, %Q3\n\t" + "cmn %Q0, %Q2\n\t" + "adcs %R0, %R0, %R2\n\t" + "adc %Q0, %1, #0" + : "=&r" (res), "+&r" (tmp) + : "r" (m), "r" (n) : "cc"); } diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 194c91b610ff..3d5a5cd071bd 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -19,38 +19,7 @@ #ifndef __ARM_KVM_ASM_H__ #define __ARM_KVM_ASM_H__ -/* 0 is reserved as an invalid value. */ -#define c0_MPIDR 1 /* MultiProcessor ID Register */ -#define c0_CSSELR 2 /* Cache Size Selection Register */ -#define c1_SCTLR 3 /* System Control Register */ -#define c1_ACTLR 4 /* Auxiliary Control Register */ -#define c1_CPACR 5 /* Coprocessor Access Control */ -#define c2_TTBR0 6 /* Translation Table Base Register 0 */ -#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ -#define c2_TTBR1 8 /* Translation Table Base Register 1 */ -#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */ -#define c2_TTBCR 10 /* Translation Table Base Control R. */ -#define c3_DACR 11 /* Domain Access Control Register */ -#define c5_DFSR 12 /* Data Fault Status Register */ -#define c5_IFSR 13 /* Instruction Fault Status Register */ -#define c5_ADFSR 14 /* Auxilary Data Fault Status R */ -#define c5_AIFSR 15 /* Auxilary Instrunction Fault Status R */ -#define c6_DFAR 16 /* Data Fault Address Register */ -#define c6_IFAR 17 /* Instruction Fault Address Register */ -#define c7_PAR 18 /* Physical Address Register */ -#define c7_PAR_high 19 /* PAR top 32 bits */ -#define c9_L2CTLR 20 /* Cortex A15/A7 L2 Control Register */ -#define c10_PRRR 21 /* Primary Region Remap Register */ -#define c10_NMRR 22 /* Normal Memory Remap Register */ -#define c12_VBAR 23 /* Vector Base Address Register */ -#define c13_CID 24 /* Context ID Register */ -#define c13_TID_URW 25 /* Thread ID, User R/W */ -#define c13_TID_URO 26 /* Thread ID, User R/O */ -#define c13_TID_PRIV 27 /* Thread ID, Privileged */ -#define c14_CNTKCTL 28 /* Timer Control Register (PL1) */ -#define c10_AMAIR0 29 /* Auxilary Memory Attribute Indirection Reg0 */ -#define c10_AMAIR1 30 /* Auxilary Memory Attribute Indirection Reg1 */ -#define NR_CP15_REGS 31 /* Number of regs (incl. invalid) */ +#include <asm/virt.h> #define ARM_EXCEPTION_RESET 0 #define ARM_EXCEPTION_UNDEFINED 1 @@ -79,6 +48,8 @@ #define rr_lo_hi(a1, a2) a1, a2 #endif +#define kvm_ksym_ref(kva) (kva) + #ifndef __ASSEMBLY__ struct kvm; struct kvm_vcpu; @@ -86,19 +57,15 @@ struct kvm_vcpu; extern char __kvm_hyp_init[]; extern char __kvm_hyp_init_end[]; -extern char __kvm_hyp_exit[]; -extern char __kvm_hyp_exit_end[]; - extern char __kvm_hyp_vector[]; -extern char __kvm_hyp_code_start[]; -extern char __kvm_hyp_code_end[]; - extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); + +extern void __init_stage2_translation(void); #endif #endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 3095df091ff8..ee5328fc4b06 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -68,12 +68,12 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) { - return &vcpu->arch.regs.usr_regs.ARM_pc; + return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc; } static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu) { - return &vcpu->arch.regs.usr_regs.ARM_cpsr; + return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr; } static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) @@ -83,13 +83,13 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) static inline bool mode_has_spsr(struct kvm_vcpu *vcpu) { - unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE); } static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu) { - unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; return cpsr_mode > USR_MODE;; } @@ -108,11 +108,6 @@ static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu) return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8; } -static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.fault.hyp_pc; -} - static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) { return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; @@ -143,6 +138,11 @@ static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu) return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW; } +static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu) +{ + return !!(kvm_vcpu_get_hsr(vcpu) & HSR_DABT_CM); +} + /* Get Access Size from a data abort */ static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu) { @@ -192,7 +192,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) { - return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK; + return vcpu_cp15(vcpu, c0_MPIDR) & MPIDR_HWID_BITMASK; } static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index f9f27792d8ed..385070180c25 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -85,20 +85,61 @@ struct kvm_vcpu_fault_info { u32 hsr; /* Hyp Syndrome Register */ u32 hxfar; /* Hyp Data/Inst. Fault Address Register */ u32 hpfar; /* Hyp IPA Fault Address Register */ - u32 hyp_pc; /* PC when exception was taken from Hyp mode */ }; -typedef struct vfp_hard_struct kvm_cpu_context_t; +/* + * 0 is reserved as an invalid value. + * Order should be kept in sync with the save/restore code. + */ +enum vcpu_sysreg { + __INVALID_SYSREG__, + c0_MPIDR, /* MultiProcessor ID Register */ + c0_CSSELR, /* Cache Size Selection Register */ + c1_SCTLR, /* System Control Register */ + c1_ACTLR, /* Auxiliary Control Register */ + c1_CPACR, /* Coprocessor Access Control */ + c2_TTBR0, /* Translation Table Base Register 0 */ + c2_TTBR0_high, /* TTBR0 top 32 bits */ + c2_TTBR1, /* Translation Table Base Register 1 */ + c2_TTBR1_high, /* TTBR1 top 32 bits */ + c2_TTBCR, /* Translation Table Base Control R. */ + c3_DACR, /* Domain Access Control Register */ + c5_DFSR, /* Data Fault Status Register */ + c5_IFSR, /* Instruction Fault Status Register */ + c5_ADFSR, /* Auxilary Data Fault Status R */ + c5_AIFSR, /* Auxilary Instrunction Fault Status R */ + c6_DFAR, /* Data Fault Address Register */ + c6_IFAR, /* Instruction Fault Address Register */ + c7_PAR, /* Physical Address Register */ + c7_PAR_high, /* PAR top 32 bits */ + c9_L2CTLR, /* Cortex A15/A7 L2 Control Register */ + c10_PRRR, /* Primary Region Remap Register */ + c10_NMRR, /* Normal Memory Remap Register */ + c12_VBAR, /* Vector Base Address Register */ + c13_CID, /* Context ID Register */ + c13_TID_URW, /* Thread ID, User R/W */ + c13_TID_URO, /* Thread ID, User R/O */ + c13_TID_PRIV, /* Thread ID, Privileged */ + c14_CNTKCTL, /* Timer Control Register (PL1) */ + c10_AMAIR0, /* Auxilary Memory Attribute Indirection Reg0 */ + c10_AMAIR1, /* Auxilary Memory Attribute Indirection Reg1 */ + NR_CP15_REGS /* Number of regs (incl. invalid) */ +}; + +struct kvm_cpu_context { + struct kvm_regs gp_regs; + struct vfp_hard_struct vfp; + u32 cp15[NR_CP15_REGS]; +}; + +typedef struct kvm_cpu_context kvm_cpu_context_t; struct kvm_vcpu_arch { - struct kvm_regs regs; + struct kvm_cpu_context ctxt; int target; /* Processor target */ DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES); - /* System control coprocessor (cp15) */ - u32 cp15[NR_CP15_REGS]; - /* The CPU type we expose to the VM */ u32 midr; @@ -111,9 +152,6 @@ struct kvm_vcpu_arch { /* Exception Information */ struct kvm_vcpu_fault_info fault; - /* Floating point registers (VFP and Advanced SIMD/NEON) */ - struct vfp_hard_struct vfp_guest; - /* Host FP context */ kvm_cpu_context_t *host_cpu_context; @@ -158,12 +196,14 @@ struct kvm_vcpu_stat { u64 exits; }; +#define vcpu_cp15(v,r) (v)->arch.ctxt.cp15[r] + int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); -u64 kvm_call_hyp(void *hypfn, ...); +unsigned long kvm_call_hyp(void *hypfn, ...); void force_vm_exit(const cpumask_t *mask); #define KVM_ARCH_WANT_MMU_NOTIFIER @@ -220,6 +260,11 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr, kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); } +static inline void __cpu_init_stage2(void) +{ + kvm_call_hyp(__init_stage2_translation); +} + static inline int kvm_arch_dev_ioctl_check_extension(long ext) { return 0; @@ -242,5 +287,20 @@ static inline void kvm_arm_init_debug(void) {} static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} +static inline int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} +static inline int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} +static inline int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h new file mode 100644 index 000000000000..f0e860761380 --- /dev/null +++ b/arch/arm/include/asm/kvm_hyp.h @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARM_KVM_HYP_H__ +#define __ARM_KVM_HYP_H__ + +#include <linux/compiler.h> +#include <linux/kvm_host.h> +#include <asm/kvm_mmu.h> +#include <asm/vfp.h> + +#define __hyp_text __section(.hyp.text) notrace + +#define kern_hyp_va(v) (v) +#define hyp_kern_va(v) (v) + +#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ + "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 +#define __ACCESS_CP15_64(Op1, CRm) \ + "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 +#define __ACCESS_VFP(CRn) \ + "mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32 + +#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) +#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) + +#define __read_sysreg(r, w, c, t) ({ \ + t __val; \ + asm volatile(r " " c : "=r" (__val)); \ + __val; \ +}) +#define read_sysreg(...) __read_sysreg(__VA_ARGS__) + +#define write_special(v, r) \ + asm volatile("msr " __stringify(r) ", %0" : : "r" (v)) +#define read_special(r) ({ \ + u32 __val; \ + asm volatile("mrs %0, " __stringify(r) : "=r" (__val)); \ + __val; \ +}) + +#define TTBR0 __ACCESS_CP15_64(0, c2) +#define TTBR1 __ACCESS_CP15_64(1, c2) +#define VTTBR __ACCESS_CP15_64(6, c2) +#define PAR __ACCESS_CP15_64(0, c7) +#define CNTV_CVAL __ACCESS_CP15_64(3, c14) +#define CNTVOFF __ACCESS_CP15_64(4, c14) + +#define MIDR __ACCESS_CP15(c0, 0, c0, 0) +#define CSSELR __ACCESS_CP15(c0, 2, c0, 0) +#define VPIDR __ACCESS_CP15(c0, 4, c0, 0) +#define VMPIDR __ACCESS_CP15(c0, 4, c0, 5) +#define SCTLR __ACCESS_CP15(c1, 0, c0, 0) +#define CPACR __ACCESS_CP15(c1, 0, c0, 2) +#define HCR __ACCESS_CP15(c1, 4, c1, 0) +#define HDCR __ACCESS_CP15(c1, 4, c1, 1) +#define HCPTR __ACCESS_CP15(c1, 4, c1, 2) +#define HSTR __ACCESS_CP15(c1, 4, c1, 3) +#define TTBCR __ACCESS_CP15(c2, 0, c0, 2) +#define HTCR __ACCESS_CP15(c2, 4, c0, 2) +#define VTCR __ACCESS_CP15(c2, 4, c1, 2) +#define DACR __ACCESS_CP15(c3, 0, c0, 0) +#define DFSR __ACCESS_CP15(c5, 0, c0, 0) +#define IFSR __ACCESS_CP15(c5, 0, c0, 1) +#define ADFSR __ACCESS_CP15(c5, 0, c1, 0) +#define AIFSR __ACCESS_CP15(c5, 0, c1, 1) +#define HSR __ACCESS_CP15(c5, 4, c2, 0) +#define DFAR __ACCESS_CP15(c6, 0, c0, 0) +#define IFAR __ACCESS_CP15(c6, 0, c0, 2) +#define HDFAR __ACCESS_CP15(c6, 4, c0, 0) +#define HIFAR __ACCESS_CP15(c6, 4, c0, 2) +#define HPFAR __ACCESS_CP15(c6, 4, c0, 4) +#define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) +#define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) +#define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) +#define PRRR __ACCESS_CP15(c10, 0, c2, 0) +#define NMRR __ACCESS_CP15(c10, 0, c2, 1) +#define AMAIR0 __ACCESS_CP15(c10, 0, c3, 0) +#define AMAIR1 __ACCESS_CP15(c10, 0, c3, 1) +#define VBAR __ACCESS_CP15(c12, 0, c0, 0) +#define CID __ACCESS_CP15(c13, 0, c0, 1) +#define TID_URW __ACCESS_CP15(c13, 0, c0, 2) +#define TID_URO __ACCESS_CP15(c13, 0, c0, 3) +#define TID_PRIV __ACCESS_CP15(c13, 0, c0, 4) +#define HTPIDR __ACCESS_CP15(c13, 4, c0, 2) +#define CNTKCTL __ACCESS_CP15(c14, 0, c1, 0) +#define CNTV_CTL __ACCESS_CP15(c14, 0, c3, 1) +#define CNTHCTL __ACCESS_CP15(c14, 4, c1, 0) + +#define VFP_FPEXC __ACCESS_VFP(FPEXC) + +/* AArch64 compatibility macros, only for the timer so far */ +#define read_sysreg_el0(r) read_sysreg(r##_el0) +#define write_sysreg_el0(v, r) write_sysreg(v, r##_el0) + +#define cntv_ctl_el0 CNTV_CTL +#define cntv_cval_el0 CNTV_CVAL +#define cntvoff_el2 CNTVOFF +#define cnthctl_el2 CNTHCTL + +void __timer_save_state(struct kvm_vcpu *vcpu); +void __timer_restore_state(struct kvm_vcpu *vcpu); + +void __vgic_v2_save_state(struct kvm_vcpu *vcpu); +void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); + +void __sysreg_save_state(struct kvm_cpu_context *ctxt); +void __sysreg_restore_state(struct kvm_cpu_context *ctxt); + +void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp); +void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp); +static inline bool __vfp_enabled(void) +{ + return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10))); +} + +void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt); +void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt); + +int asmlinkage __guest_enter(struct kvm_vcpu *vcpu, + struct kvm_cpu_context *host); +int asmlinkage __hyp_do_panic(const char *, int, u32); + +#endif /* __ARM_KVM_HYP_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index a520b7987a29..da44be9db4fa 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -179,7 +179,7 @@ struct kvm; static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu) { - return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101; + return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101; } static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index c79b57bf71c4..9427fd632552 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -134,6 +134,21 @@ */ #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) +#ifdef CONFIG_XIP_KERNEL +/* + * When referencing data in RAM from the XIP region in a relative manner + * with the MMU off, we need the relative offset between the two physical + * addresses. The macro below achieves this, which is: + * __pa(v_data) - __xip_pa(v_text) + */ +#define PHYS_RELATIVE(v_data, v_text) \ + (((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \ + ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \ + CONFIG_XIP_PHYS_ADDR)) +#else +#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text)) +#endif + #ifndef __ASSEMBLY__ /* @@ -273,14 +288,14 @@ static inline void *phys_to_virt(phys_addr_t x) #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) #define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT) -extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x); +extern unsigned long (*arch_virt_to_idmap)(unsigned long x); /* * These are for systems that have a hardware interconnect supported alias of * physical memory for idmap purposes. Most cases should leave these - * untouched. + * untouched. Note: this can only return addresses less than 4GiB. */ -static inline phys_addr_t __virt_to_idmap(unsigned long x) +static inline unsigned long __virt_to_idmap(unsigned long x) { if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap) return arch_virt_to_idmap(x); @@ -303,20 +318,6 @@ static inline phys_addr_t __virt_to_idmap(unsigned long x) #define __bus_to_pfn(x) __phys_to_pfn(x) #endif -#ifdef CONFIG_VIRT_TO_BUS -#define virt_to_bus virt_to_bus -static inline __deprecated unsigned long virt_to_bus(void *x) -{ - return __virt_to_bus((unsigned long)x); -} - -#define bus_to_virt bus_to_virt -static inline __deprecated void *bus_to_virt(unsigned long x) -{ - return (void *)__bus_to_virt(x); -} -#endif - /* * Conversion between a struct page and a physical address. * diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 432ce8176498..fa5b42d44985 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -26,7 +26,12 @@ void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); -#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; }) +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + atomic64_set(&mm->context.id, 0); + return 0; +} #ifdef CONFIG_ARM_ERRATA_798181 void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm, @@ -85,7 +90,12 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_MMU */ -#define init_new_context(tsk,mm) 0 +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + return 0; +} + #endif /* CONFIG_CPU_HAS_ASID */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index a5635444ca41..057d381f4e57 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -2,9 +2,6 @@ #define ASMARM_PCI_H #ifdef __KERNEL__ -#include <asm-generic/pci-dma-compat.h> -#include <asm-generic/pci-bridge.h> - #include <asm/mach/pci.h> /* for pci_sys_data */ extern unsigned long pcibios_min_io; @@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #endif /* __KERNEL__ */ - #endif diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h new file mode 100644 index 000000000000..803bbf2b20b8 --- /dev/null +++ b/arch/arm/include/asm/sections.h @@ -0,0 +1,8 @@ +#ifndef _ASM_ARM_SECTIONS_H +#define _ASM_ARM_SECTIONS_H + +#include <asm-generic/sections.h> + +extern char _exiprom[]; + +#endif /* _ASM_ARM_SECTIONS_H */ diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h index 00098615c6f0..73e5e8513751 100644 --- a/arch/arm/include/asm/sparsemem.h +++ b/arch/arm/include/asm/sparsemem.h @@ -15,10 +15,11 @@ * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000, * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26. * - * Define these in your mach/memory.h. + * These can be overridden in your mach/memory.h. */ -#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS) -#error Sparsemem is not supported on this platform +#if !defined(MAX_PHYSMEM_BITS) || !defined(SECTION_SIZE_BITS) +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 28 #endif #endif diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 4371f45c5784..d4ceaf5f299b 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -74,6 +74,15 @@ static inline bool is_hyp_mode_mismatched(void) { return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH); } + +static inline bool is_kernel_in_hyp_mode(void) +{ + return false; +} + +/* The section containing the hypervisor text */ +extern char __hyp_text_start[]; +extern char __hyp_text_end[]; #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index d769972db8cb..b6b962d70db9 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -33,6 +33,8 @@ #ifndef _ASM_ARM_XEN_HYPERCALL_H #define _ASM_ARM_XEN_HYPERCALL_H +#include <linux/bug.h> + #include <xen/interface/xen.h> #include <xen/interface/sched.h> #include <xen/interface/platform.h> diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index 0375c8caa061..9408a994cc91 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page); + unsigned long page_pfn = page_to_xen_pfn(page); + unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); + unsigned long compound_pages = + (1<<compound_order(page)) * XEN_PFN_PER_PAGE; + bool local = (page_pfn <= dev_pfn) && + (dev_pfn - page_pfn < compound_pages); + /* - * Dom0 is mapped 1:1, while the Linux page can be spanned accross - * multiple Xen page, it's not possible to have a mix of local and - * foreign Xen page. So if the first xen_pfn == mfn the page is local - * otherwise it's a foreign page grant-mapped in dom0. If the page is - * local we can safely call the native dma_ops function, otherwise we - * call the xen specific function. + * Dom0 is mapped 1:1, while the Linux page can span across + * multiple Xen pages, it's not possible for it to contain a + * mix of local and foreign Xen pages. So if the first xen_pfn + * == mfn the page is local otherwise it's a foreign page + * grant-mapped in dom0. If the page is local we can safely + * call the native dma_ops function, otherwise we call the xen + * specific function. */ if (local) __generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs); diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 43243be94cfc..d4ae3b8e2426 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -15,7 +15,7 @@ #define AT91_IO_P2V(x) (x) #endif -#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) +#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ @@ -24,7 +24,7 @@ .macro addruart, rp, rv, tmp ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address) - ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address) + ldr \rv, =AT91_DEBUG_UART_VIRT @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 619d8cc1ac12..92c44760d656 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -11,6 +11,7 @@ * */ +#include <asm/assembler.h> #include "imx-uart.h" /* @@ -34,6 +35,7 @@ .endm .macro senduart,rd,rx + ARM_BE8(rev \rd, \rd) str \rd, [\rx, #0x40] @ TXDATA .endm @@ -42,6 +44,7 @@ .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #0x98] @ SR2 + ARM_BE8(rev \rd, \rd) tst \rd, #1 << 3 @ TXDC beq 1002b @ wait until transmit done .endm diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S new file mode 100644 index 000000000000..6824b2d1c38e --- /dev/null +++ b/arch/arm/include/debug/palmchip.S @@ -0,0 +1,11 @@ +#include <linux/serial_reg.h> + +#undef UART_TX +#undef UART_LSR +#undef UART_MSR + +#define UART_TX 1 +#define UART_LSR 7 +#define UART_MSR 8 + +#include <debug/8250.S> diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index de86b9247564..060cb5b49bfd 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,9 +20,9 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 -#define UART0_VIRT 0xF0000000 +#define UART0_VIRT 0xF0800000 #define UART1_PHYS 0xE0001000 -#define UART1_VIRT 0xF0001000 +#define UART1_VIRT 0xF0801000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ede692ffa32e..5dd2528e9e45 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -417,6 +417,7 @@ #define __NR_userfaultfd (__NR_SYSCALL_BASE+388) #define __NR_membarrier (__NR_SYSCALL_BASE+389) #define __NR_mlock2 (__NR_SYSCALL_BASE+390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 2c5f160be65e..ad325a8c7e1e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o +AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a ifeq ($(CONFIG_ARM_PSCI),y) obj-$(CONFIG_SMP) += psci_smp.o endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 871b8267d211..27d05813ff09 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -170,41 +170,11 @@ int main(void) DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); BLANK(); #ifdef CONFIG_KVM_ARM_HOST - DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); - DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); - DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15)); - DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest)); - DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.host_cpu_context)); - DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs)); - DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs)); - DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs)); - DEFINE(VCPU_ABT_REGS, offsetof(struct kvm_vcpu, arch.regs.abt_regs)); - DEFINE(VCPU_UND_REGS, offsetof(struct kvm_vcpu, arch.regs.und_regs)); - DEFINE(VCPU_IRQ_REGS, offsetof(struct kvm_vcpu, arch.regs.irq_regs)); - DEFINE(VCPU_FIQ_REGS, offsetof(struct kvm_vcpu, arch.regs.fiq_regs)); - DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc)); - DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr)); - DEFINE(VCPU_HCR, offsetof(struct kvm_vcpu, arch.hcr)); - DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines)); - DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.fault.hsr)); - DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.fault.hxfar)); - DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.fault.hpfar)); - DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); - DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); - DEFINE(VGIC_V2_CPU_HCR, offsetof(struct vgic_cpu, vgic_v2.vgic_hcr)); - DEFINE(VGIC_V2_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr)); - DEFINE(VGIC_V2_CPU_MISR, offsetof(struct vgic_cpu, vgic_v2.vgic_misr)); - DEFINE(VGIC_V2_CPU_EISR, offsetof(struct vgic_cpu, vgic_v2.vgic_eisr)); - DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr)); - DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr)); - DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr)); - DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); - DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); - DEFINE(VCPU_TIMER_CNTV_CVAL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval)); - DEFINE(KVM_TIMER_CNTVOFF, offsetof(struct kvm, arch.timer.cntvoff)); - DEFINE(KVM_TIMER_ENABLED, offsetof(struct kvm, arch.timer.enabled)); - DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base)); - DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr)); + DEFINE(VCPU_GUEST_CTXT, offsetof(struct kvm_vcpu, arch.ctxt)); + DEFINE(VCPU_HOST_CTXT, offsetof(struct kvm_vcpu, arch.host_cpu_context)); + DEFINE(CPU_CTXT_VFP, offsetof(struct kvm_cpu_context, vfp)); + DEFINE(CPU_CTXT_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs)); + DEFINE(GP_REGS_USR, offsetof(struct kvm_regs, usr_regs)); #endif BLANK(); #ifdef CONFIG_VDSO diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index ac368bb068d1..dfc7cd6851ad 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -400,6 +400,7 @@ CALL(sys_userfaultfd) CALL(sys_membarrier) CALL(sys_mlock2) + CALL(sys_copy_file_range) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3ce377f7251f..e2550500486d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -1064,7 +1064,6 @@ ENDPROC(vector_\name) .endm .section .stubs, "ax", %progbits -__stubs_start: @ This must be the first word .word vector_swi @@ -1202,14 +1201,13 @@ vector_addrexcptn: .long __fiq_svc @ e .long __fiq_svc @ f - .globl vector_fiq_offset - .equ vector_fiq_offset, vector_fiq + .globl vector_fiq .section .vectors, "ax", %progbits -__vectors_start: +.L__vectors_start: W(b) vector_rst W(b) vector_und - W(ldr) pc, __vectors_start + 0x1000 + W(ldr) pc, .L__vectors_start + 0x1000 W(b) vector_pabt W(b) vector_dabt W(b) vector_addrexcptn diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index a71501ff6f18..b09561a6d06a 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c @@ -62,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused) ret = swsusp_save(); if (ret == 0) - _soft_restart(virt_to_phys(cpu_resume), false); + _soft_restart(virt_to_idmap(cpu_resume), false); return ret; } @@ -87,7 +87,7 @@ static void notrace arch_restore_image(void *unused) for (pbe = restore_pblist; pbe; pbe = pbe->next) copy_page(pbe->orig_address, pbe->address); - _soft_restart(virt_to_phys(cpu_resume), false); + _soft_restart(virt_to_idmap(cpu_resume), false); } static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 2a55373f49bf..0b1e4a93d67e 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -17,6 +17,7 @@ */ #include <linux/init.h> +#include <linux/irqchip/arm-gic-v3.h> #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/virt.h> @@ -161,6 +162,29 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE 1: #endif +#ifdef CONFIG_ARM_GIC_V3 + @ Check whether GICv3 system registers are available + mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 + ubfx r7, r7, #28, #4 + cmp r7, #1 + bne 2f + + @ Enable system register accesses + mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE + orr r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE) + mcr p15, 4, r7, c12, c9, 5 @ ICC_HSRE + isb + + @ SRE bit could be forced to 0 by firmware. + @ Check whether it sticks before accessing any other sysreg + mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE + tst r7, #ICC_SRE_EL2_SRE + beq 2f + mov r7, #0 + mcr p15, 4, r7, c12, c11, 0 @ ICH_HCR +2: +#endif + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 1d45320ee125..ece04a457486 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -95,7 +95,7 @@ void __init init_IRQ(void) outer_cache.write_sec = machine_desc->l2c_write_sec; ret = l2x0_of_init(machine_desc->l2c_aux_val, machine_desc->l2c_aux_mask); - if (ret) + if (ret && ret != -ENODEV) pr_err("L2C: failed to init: %d\n", ret); } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8bf3b7c09888..59fd0e24c56b 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -143,10 +143,8 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { - unsigned long page_list; - unsigned long reboot_code_buffer_phys; - unsigned long reboot_entry = (unsigned long)relocate_new_kernel; - unsigned long reboot_entry_phys; + unsigned long page_list, reboot_entry_phys; + void (*reboot_entry)(void); void *reboot_code_buffer; /* @@ -159,9 +157,6 @@ void machine_kexec(struct kimage *image) page_list = image->head & PAGE_MASK; - /* we need both effective and real address here */ - reboot_code_buffer_phys = - page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); /* Prepare parameters for reboot_code_buffer*/ @@ -174,10 +169,11 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ reboot_entry = fncpy(reboot_code_buffer, - reboot_entry, + &relocate_new_kernel, relocate_new_kernel_size); - reboot_entry_phys = (unsigned long)reboot_entry + - (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer); + + /* get the identity mapping physical address for the reboot code */ + reboot_entry_phys = virt_to_idmap(reboot_entry); pr_info("Bye!\n"); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index efdddcb97dd1..4f14b5ce6535 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -34,7 +34,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) +#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4152158f6e6a..15063851cd10 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -712,6 +712,11 @@ static const struct attribute_group *armv7_pmuv2_attr_groups[] = { #define ARMV7_EXCLUDE_USER (1 << 30) #define ARMV7_INCLUDE_HYP (1 << 27) +/* + * Secure debug enable reg + */ +#define ARMV7_SDER_SUNIDEN BIT(1) /* Permit non-invasive debug */ + static inline u32 armv7_pmnc_read(void) { u32 val; @@ -1094,7 +1099,13 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event, static void armv7pmu_reset(void *info) { struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; - u32 idx, nb_cnt = cpu_pmu->num_events; + u32 idx, nb_cnt = cpu_pmu->num_events, val; + + if (cpu_pmu->secure_access) { + asm volatile("mrc p15, 0, %0, c1, c1, 1" : "=r" (val)); + val |= ARMV7_SDER_SUNIDEN; + asm volatile("mcr p15, 0, %0, c1, c1, 1" : : "r" (val)); + } /* The counter and interrupt enable registers are unknown at reset. */ for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 38269358fd25..71a2ff9ec490 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -50,7 +50,7 @@ static void __soft_restart(void *addr) flush_cache_all(); /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset); + phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset); phys_reset((unsigned long)addr); /* Should never get here. */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7d0cba6f1cc5..139791ed473d 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -176,13 +176,13 @@ static struct resource mem_res[] = { .name = "Kernel code", .start = 0, .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_SYSTEM_RAM }, { .name = "Kernel data", .start = 0, .end = 0, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_SYSTEM_RAM } }; @@ -851,7 +851,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; request_resource(&iomem_resource, res); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 37312f6749f3..baee70267f29 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -409,7 +409,7 @@ asmlinkage void secondary_start_kernel(void) /* * OK, it's off to the idle thread for us */ - cpu_startup_entry(CPUHP_ONLINE); + cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 08b7847bf912..ec279d161b32 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -40,7 +40,7 @@ * to run the rebalance_domains for all idle cores and the cpu_capacity can be * updated during this sequence. */ -static DEFINE_PER_CPU(unsigned long, cpu_scale); +static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE; unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu) { @@ -306,8 +306,6 @@ void __init init_cpu_topology(void) cpu_topo->socket_id = -1; cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); - - set_capacity_scale(cpu, SCHED_CAPACITY_SCALE); } smp_wmb(); diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S new file mode 100644 index 000000000000..cba1ec899a69 --- /dev/null +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -0,0 +1,316 @@ +/* ld script to make ARM Linux kernel + * taken from the i386 version by Russell King + * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + */ + +#include <asm-generic/vmlinux.lds.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/memory.h> +#include <asm/page.h> + +#define PROC_INFO \ + . = ALIGN(4); \ + VMLINUX_SYMBOL(__proc_info_begin) = .; \ + *(.proc.info.init) \ + VMLINUX_SYMBOL(__proc_info_end) = .; + +#define IDMAP_TEXT \ + ALIGN_FUNCTION(); \ + VMLINUX_SYMBOL(__idmap_text_start) = .; \ + *(.idmap.text) \ + VMLINUX_SYMBOL(__idmap_text_end) = .; \ + . = ALIGN(PAGE_SIZE); \ + VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ + *(.hyp.idmap.text) \ + VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; + +#ifdef CONFIG_HOTPLUG_CPU +#define ARM_CPU_DISCARD(x) +#define ARM_CPU_KEEP(x) x +#else +#define ARM_CPU_DISCARD(x) x +#define ARM_CPU_KEEP(x) +#endif + +#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \ + defined(CONFIG_GENERIC_BUG) +#define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) +#else +#define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x +#endif + +OUTPUT_ARCH(arm) +ENTRY(stext) + +#ifndef __ARMEB__ +jiffies = jiffies_64; +#else +jiffies = jiffies_64 + 4; +#endif + +SECTIONS +{ + /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * + * unwind exit sections must be discarded before the rest of the + * unwind sections get included. + */ + /DISCARD/ : { + *(.ARM.exidx.exit.text) + *(.ARM.extab.exit.text) + ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) + ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL +#ifndef CONFIG_MMU + *(.text.fixup) + *(__ex_table) +#endif +#ifndef CONFIG_SMP_ON_UP + *(.alt.smp.init) +#endif + *(.discard) + *(.discard.*) + } + + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); + _xiprom = .; /* XIP ROM area to be mapped */ + + .head.text : { + _text = .; + HEAD_TEXT + } + + .text : { /* Real text segment */ + _stext = .; /* Text and read-only data */ + IDMAP_TEXT + __exception_text_start = .; + *(.exception.text) + __exception_text_end = .; + IRQENTRY_TEXT + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.gnu.warning) + *(.glue_7) + *(.glue_7t) + . = ALIGN(4); + *(.got) /* Global offset table */ + ARM_CPU_KEEP(PROC_INFO) + } + + RO_DATA(PAGE_SIZE) + + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +#ifdef CONFIG_MMU + *(__ex_table) +#endif + __stop___ex_table = .; + } + +#ifdef CONFIG_ARM_UNWIND + /* + * Stack unwinding tables + */ + . = ALIGN(8); + .ARM.unwind_idx : { + __start_unwind_idx = .; + *(.ARM.exidx*) + __stop_unwind_idx = .; + } + .ARM.unwind_tab : { + __start_unwind_tab = .; + *(.ARM.extab*) + __stop_unwind_tab = .; + } +#endif + + NOTES + + _etext = .; /* End of text and rodata section */ + + /* + * The vectors and stubs are relocatable code, and the + * only thing that matters is their relative offsets + */ + __vectors_start = .; + .vectors 0xffff0000 : AT(__vectors_start) { + *(.vectors) + } + . = __vectors_start + SIZEOF(.vectors); + __vectors_end = .; + + __stubs_start = .; + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { + *(.stubs) + } + . = __stubs_start + SIZEOF(.stubs); + __stubs_end = .; + + PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); + + INIT_TEXT_SECTION(8) + .exit.text : { + ARM_EXIT_KEEP(EXIT_TEXT) + } + .init.proc.info : { + ARM_CPU_DISCARD(PROC_INFO) + } + .init.arch.info : { + __arch_info_begin = .; + *(.arch.info.init) + __arch_info_end = .; + } + .init.tagtable : { + __tagtable_begin = .; + *(.taglist.init) + __tagtable_end = .; + } +#ifdef CONFIG_SMP_ON_UP + .init.smpalt : { + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; + } +#endif + .init.pv_table : { + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + } + .init.data : { + INIT_SETUP(16) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + } + +#ifdef CONFIG_SMP + PERCPU_SECTION(L1_CACHE_BYTES) +#endif + + _exiprom = .; /* End of XIP ROM area */ + __data_loc = ALIGN(4); /* location in binary */ + . = PAGE_OFFSET + TEXT_OFFSET; + + .data : AT(__data_loc) { + _data = .; /* address in memory */ + _sdata = .; + + /* + * first, the init task union, aligned + * to an 8192 byte boundary. + */ + INIT_TASK_DATA(THREAD_SIZE) + + . = ALIGN(PAGE_SIZE); + __init_begin = .; + INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) + . = ALIGN(PAGE_SIZE); + __init_end = .; + + NOSAVE_DATA + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + READ_MOSTLY_DATA(L1_CACHE_BYTES) + + /* + * and the usual data section + */ + DATA_DATA + CONSTRUCTORS + + _edata = .; + } + _edata_loc = __data_loc + SIZEOF(.data); + +#ifdef CONFIG_HAVE_TCM + /* + * We align everything to a page boundary so we can + * free it after init has commenced and TCM contents have + * been copied to its destination. + */ + .tcm_start : { + . = ALIGN(PAGE_SIZE); + __tcm_start = .; + __itcm_start = .; + } + + /* + * Link these to the ITCM RAM + * Put VMA to the TCM address and LMA to the common RAM + * and we'll upload the contents from RAM to TCM and free + * the used RAM after that. + */ + .text_itcm ITCM_OFFSET : AT(__itcm_start) + { + __sitcm_text = .; + *(.tcm.text) + *(.tcm.rodata) + . = ALIGN(4); + __eitcm_text = .; + } + + /* + * Reset the dot pointer, this is needed to create the + * relative __dtcm_start below (to be used as extern in code). + */ + . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm); + + .dtcm_start : { + __dtcm_start = .; + } + + /* TODO: add remainder of ITCM as well, that can be used for data! */ + .data_dtcm DTCM_OFFSET : AT(__dtcm_start) + { + . = ALIGN(4); + __sdtcm_data = .; + *(.tcm.data) + . = ALIGN(4); + __edtcm_data = .; + } + + /* Reset the dot pointer or the linker gets confused */ + . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm); + + /* End marker for freeing TCM copy in linked object */ + .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){ + . = ALIGN(PAGE_SIZE); + __tcm_end = .; + } +#endif + + BSS_SECTION(0, 0, 0) + _end = .; + + STABS_DEBUG +} + +/* + * These must never be empty + * If you have to comment these two assert statements out, your + * binutils is too old (for other reasons as well) + */ +ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") +ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") + +/* + * The HYP init code can't be more than a page long, + * and should not cross a page boundary. + * The above comment applies as well. + */ +ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, + "HYP init code too big or misaligned") diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 8b60fde5ce48..1fab979daeaf 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -3,14 +3,16 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> */ +#ifdef CONFIG_XIP_KERNEL +#include "vmlinux-xip.lds.S" +#else + #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/page.h> -#ifdef CONFIG_ARM_KERNMEM_PERMS #include <asm/pgtable.h> -#endif #define PROC_INFO \ . = ALIGN(4); \ @@ -18,6 +20,11 @@ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; +#define HYPERVISOR_TEXT \ + VMLINUX_SYMBOL(__hyp_text_start) = .; \ + *(.hyp.text) \ + VMLINUX_SYMBOL(__hyp_text_end) = .; + #define IDMAP_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__idmap_text_start) = .; \ @@ -84,17 +91,13 @@ SECTIONS *(.discard.*) } -#ifdef CONFIG_XIP_KERNEL - . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); -#else . = PAGE_OFFSET + TEXT_OFFSET; -#endif .head.text : { _text = .; HEAD_TEXT } -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif @@ -108,6 +111,7 @@ SECTIONS TEXT_TEXT SCHED_TEXT LOCK_TEXT + HYPERVISOR_TEXT KPROBES_TEXT *(.gnu.warning) *(.glue_7) @@ -117,7 +121,7 @@ SECTIONS ARM_CPU_KEEP(PROC_INFO) } -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_DEBUG_ALIGN_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif RO_DATA(PAGE_SIZE) @@ -152,32 +156,33 @@ SECTIONS _etext = .; /* End of text and rodata section */ -#ifndef CONFIG_XIP_KERNEL -# ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); -# else +#else . = ALIGN(PAGE_SIZE); -# endif - __init_begin = .; #endif + __init_begin = .; + /* * The vectors and stubs are relocatable code, and the * only thing that matters is their relative offsets */ __vectors_start = .; - .vectors 0 : AT(__vectors_start) { + .vectors 0xffff0000 : AT(__vectors_start) { *(.vectors) } . = __vectors_start + SIZEOF(.vectors); __vectors_end = .; __stubs_start = .; - .stubs 0x1000 : AT(__stubs_start) { + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { *(.stubs) } . = __stubs_start + SIZEOF(.stubs); __stubs_end = .; + PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); + INIT_TEXT_SECTION(8) .exit.text : { ARM_EXIT_KEEP(EXIT_TEXT) @@ -208,37 +213,28 @@ SECTIONS __pv_table_end = .; } .init.data : { -#ifndef CONFIG_XIP_KERNEL INIT_DATA -#endif INIT_SETUP(16) INIT_CALLS CON_INITCALL SECURITY_INITCALL INIT_RAM_FS } -#ifndef CONFIG_XIP_KERNEL .exit.data : { ARM_EXIT_KEEP(EXIT_DATA) } -#endif #ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) #endif -#ifdef CONFIG_XIP_KERNEL - __data_loc = ALIGN(4); /* location in binary */ - . = PAGE_OFFSET + TEXT_OFFSET; -#else -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #else . = ALIGN(THREAD_SIZE); #endif __init_end = .; __data_loc = .; -#endif .data : AT(__data_loc) { _data = .; /* address in memory */ @@ -250,15 +246,6 @@ SECTIONS */ INIT_TASK_DATA(THREAD_SIZE) -#ifdef CONFIG_XIP_KERNEL - . = ALIGN(PAGE_SIZE); - __init_begin = .; - INIT_DATA - ARM_EXIT_KEEP(EXIT_DATA) - . = ALIGN(PAGE_SIZE); - __init_end = .; -#endif - NOSAVE_DATA CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) READ_MOSTLY_DATA(L1_CACHE_BYTES) @@ -336,6 +323,15 @@ SECTIONS STABS_DEBUG } +#ifdef CONFIG_DEBUG_RODATA +/* + * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will + * be the first section-aligned location after __start_rodata. Otherwise, + * it will be equal to __start_rodata. + */ +__start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT); +#endif + /* * These must never be empty * If you have to comment these two assert statements out, your @@ -351,3 +347,5 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") */ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, "HYP init code too big or misaligned") + +#endif /* CONFIG_XIP_KERNEL */ diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index c5eef02c52ba..eb1bf4309c13 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -17,6 +17,7 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) KVM := ../../../virt/kvm kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o +obj-$(CONFIG_KVM_ARM_HOST) += hyp/ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index dda1959f0dde..6accd66d26f0 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -28,6 +28,7 @@ #include <linux/sched.h> #include <linux/kvm.h> #include <trace/events/kvm.h> +#include <kvm/arm_pmu.h> #define CREATE_TRACE_POINTS #include "trace.h" @@ -265,6 +266,7 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) kvm_mmu_free_memory_caches(vcpu); kvm_timer_vcpu_terminate(vcpu); kvm_vgic_vcpu_destroy(vcpu); + kvm_pmu_vcpu_destroy(vcpu); kmem_cache_free(kvm_vcpu_cache, vcpu); } @@ -320,6 +322,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) vcpu->cpu = -1; kvm_arm_set_running_vcpu(NULL); + kvm_timer_vcpu_put(vcpu); } int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, @@ -370,7 +373,9 @@ static void exit_vm_noop(void *info) void force_vm_exit(const cpumask_t *mask) { + preempt_disable(); smp_call_function_many(mask, exit_vm_noop, NULL, true); + preempt_enable(); } /** @@ -506,18 +511,18 @@ static void kvm_arm_resume_guest(struct kvm *kvm) struct kvm_vcpu *vcpu; kvm_for_each_vcpu(i, vcpu, kvm) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); vcpu->arch.pause = false; - wake_up_interruptible(wq); + swake_up(wq); } } static void vcpu_sleep(struct kvm_vcpu *vcpu) { - wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu); - wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && + swait_event_interruptible(*wq, ((!vcpu->arch.power_off) && (!vcpu->arch.pause))); } @@ -577,6 +582,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * non-preemptible context. */ preempt_disable(); + kvm_pmu_flush_hwstate(vcpu); kvm_timer_flush_hwstate(vcpu); kvm_vgic_flush_hwstate(vcpu); @@ -593,6 +599,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || vcpu->arch.power_off || vcpu->arch.pause) { local_irq_enable(); + kvm_pmu_sync_hwstate(vcpu); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); preempt_enable(); @@ -642,10 +649,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* - * We must sync the timer state before the vgic state so that - * the vgic can properly sample the updated state of the + * We must sync the PMU and timer state before the vgic state so + * that the vgic can properly sample the updated state of the * interrupt line. */ + kvm_pmu_sync_hwstate(vcpu); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); @@ -823,11 +831,54 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu, return 0; } +static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr); + break; + } + + return ret; +} + +static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr); + break; + } + + return ret; +} + +static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + default: + ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr); + break; + } + + return ret; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm_vcpu *vcpu = filp->private_data; void __user *argp = (void __user *)arg; + struct kvm_device_attr attr; switch (ioctl) { case KVM_ARM_VCPU_INIT: { @@ -870,6 +921,21 @@ long kvm_arch_vcpu_ioctl(struct file *filp, return -E2BIG; return kvm_arm_copy_reg_indices(vcpu, user_list->reg); } + case KVM_SET_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_set_attr(vcpu, &attr); + } + case KVM_GET_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_get_attr(vcpu, &attr); + } + case KVM_HAS_DEVICE_ATTR: { + if (copy_from_user(&attr, argp, sizeof(attr))) + return -EFAULT; + return kvm_arm_vcpu_has_attr(vcpu, &attr); + } default: return -EINVAL; } @@ -967,6 +1033,11 @@ long kvm_arch_vm_ioctl(struct file *filp, } } +static void cpu_init_stage2(void *dummy) +{ + __cpu_init_stage2(); +} + static void cpu_init_hyp_mode(void *dummy) { phys_addr_t boot_pgd_ptr; @@ -982,9 +1053,10 @@ static void cpu_init_hyp_mode(void *dummy) pgd_ptr = kvm_mmu_get_httbr(); stack_page = __this_cpu_read(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; - vector_ptr = (unsigned long)__kvm_hyp_vector; + vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector); __cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr); + __cpu_init_stage2(); kvm_arm_init_debug(); } @@ -1035,6 +1107,82 @@ static inline void hyp_cpu_pm_init(void) } #endif +static void teardown_common_resources(void) +{ + free_percpu(kvm_host_cpu_state); +} + +static int init_common_resources(void) +{ + kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); + if (!kvm_host_cpu_state) { + kvm_err("Cannot allocate host CPU state\n"); + return -ENOMEM; + } + + return 0; +} + +static int init_subsystems(void) +{ + int err; + + /* + * Init HYP view of VGIC + */ + err = kvm_vgic_hyp_init(); + switch (err) { + case 0: + vgic_present = true; + break; + case -ENODEV: + case -ENXIO: + vgic_present = false; + break; + default: + return err; + } + + /* + * Init HYP architected timer support + */ + err = kvm_timer_hyp_init(); + if (err) + return err; + + kvm_perf_init(); + kvm_coproc_table_init(); + + return 0; +} + +static void teardown_hyp_mode(void) +{ + int cpu; + + if (is_kernel_in_hyp_mode()) + return; + + free_hyp_pgds(); + for_each_possible_cpu(cpu) + free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); +} + +static int init_vhe_mode(void) +{ + /* + * Execute the init code on each CPU. + */ + on_each_cpu(cpu_init_stage2, NULL, 1); + + /* set size of VMID supported by CPU */ + kvm_vmid_bits = kvm_get_vmid_bits(); + kvm_info("%d-bit VMID\n", kvm_vmid_bits); + + kvm_info("VHE mode initialized successfully\n"); + return 0; +} + /** * Inits Hyp-mode on all online CPUs */ @@ -1065,7 +1213,7 @@ static int init_hyp_mode(void) stack_page = __get_free_page(GFP_KERNEL); if (!stack_page) { err = -ENOMEM; - goto out_free_stack_pages; + goto out_err; } per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page; @@ -1074,16 +1222,18 @@ static int init_hyp_mode(void) /* * Map the Hyp-code called directly from the host */ - err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end); + err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start), + kvm_ksym_ref(__hyp_text_end)); if (err) { kvm_err("Cannot map world-switch code\n"); - goto out_free_mappings; + goto out_err; } - err = create_hyp_mappings(__start_rodata, __end_rodata); + err = create_hyp_mappings(kvm_ksym_ref(__start_rodata), + kvm_ksym_ref(__end_rodata)); if (err) { kvm_err("Cannot map rodata section\n"); - goto out_free_mappings; + goto out_err; } /* @@ -1095,20 +1245,10 @@ static int init_hyp_mode(void) if (err) { kvm_err("Cannot map hyp stack\n"); - goto out_free_mappings; + goto out_err; } } - /* - * Map the host CPU structures - */ - kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); - if (!kvm_host_cpu_state) { - err = -ENOMEM; - kvm_err("Cannot allocate host CPU state\n"); - goto out_free_mappings; - } - for_each_possible_cpu(cpu) { kvm_cpu_context_t *cpu_ctxt; @@ -1117,7 +1257,7 @@ static int init_hyp_mode(void) if (err) { kvm_err("Cannot map host CPU state: %d\n", err); - goto out_free_context; + goto out_err; } } @@ -1126,34 +1266,22 @@ static int init_hyp_mode(void) */ on_each_cpu(cpu_init_hyp_mode, NULL, 1); - /* - * Init HYP view of VGIC - */ - err = kvm_vgic_hyp_init(); - switch (err) { - case 0: - vgic_present = true; - break; - case -ENODEV: - case -ENXIO: - vgic_present = false; - break; - default: - goto out_free_context; - } - - /* - * Init HYP architected timer support - */ - err = kvm_timer_hyp_init(); - if (err) - goto out_free_context; - #ifndef CONFIG_HOTPLUG_CPU free_boot_hyp_pgd(); #endif - kvm_perf_init(); + cpu_notifier_register_begin(); + + err = __register_cpu_notifier(&hyp_init_cpu_nb); + + cpu_notifier_register_done(); + + if (err) { + kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + goto out_err; + } + + hyp_cpu_pm_init(); /* set size of VMID supported by CPU */ kvm_vmid_bits = kvm_get_vmid_bits(); @@ -1162,14 +1290,9 @@ static int init_hyp_mode(void) kvm_info("Hyp mode initialized successfully\n"); return 0; -out_free_context: - free_percpu(kvm_host_cpu_state); -out_free_mappings: - free_hyp_pgds(); -out_free_stack_pages: - for_each_possible_cpu(cpu) - free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); + out_err: + teardown_hyp_mode(); kvm_err("error initializing Hyp mode: %d\n", err); return err; } @@ -1213,26 +1336,27 @@ int kvm_arch_init(void *opaque) } } - cpu_notifier_register_begin(); - - err = init_hyp_mode(); + err = init_common_resources(); if (err) - goto out_err; + return err; - err = __register_cpu_notifier(&hyp_init_cpu_nb); - if (err) { - kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + if (is_kernel_in_hyp_mode()) + err = init_vhe_mode(); + else + err = init_hyp_mode(); + if (err) goto out_err; - } - - cpu_notifier_register_done(); - hyp_cpu_pm_init(); + err = init_subsystems(); + if (err) + goto out_hyp; - kvm_coproc_table_init(); return 0; + +out_hyp: + teardown_hyp_mode(); out_err: - cpu_notifier_register_done(); + teardown_common_resources(); return err; } diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index f3d88dc388bc..1bb2b79c01ff 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -16,6 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +#include <linux/bsearch.h> #include <linux/mm.h> #include <linux/kvm_host.h> #include <linux/uaccess.h> @@ -54,8 +56,8 @@ static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu, const struct coproc_reg *r, u64 val) { - vcpu->arch.cp15[r->reg] = val & 0xffffffff; - vcpu->arch.cp15[r->reg + 1] = val >> 32; + vcpu_cp15(vcpu, r->reg) = val & 0xffffffff; + vcpu_cp15(vcpu, r->reg + 1) = val >> 32; } static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, @@ -63,9 +65,9 @@ static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, { u64 val; - val = vcpu->arch.cp15[r->reg + 1]; + val = vcpu_cp15(vcpu, r->reg + 1); val = val << 32; - val = val | vcpu->arch.cp15[r->reg]; + val = val | vcpu_cp15(vcpu, r->reg); return val; } @@ -104,7 +106,7 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) * vcpu_id, but we read the 'U' bit from the underlying * hardware directly. */ - vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | + vcpu_cp15(vcpu, c0_MPIDR) = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) | (vcpu->vcpu_id & 3)); } @@ -117,7 +119,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu, if (p->is_write) return ignore_write(vcpu, p); - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR]; + *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c1_ACTLR); return true; } @@ -139,7 +141,7 @@ static bool access_l2ctlr(struct kvm_vcpu *vcpu, if (p->is_write) return ignore_write(vcpu, p); - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR]; + *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c9_L2CTLR); return true; } @@ -156,7 +158,7 @@ static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) ncores = min(ncores, 3U); l2ctlr |= (ncores & 3) << 24; - vcpu->arch.cp15[c9_L2CTLR] = l2ctlr; + vcpu_cp15(vcpu, c9_L2CTLR) = l2ctlr; } static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) @@ -171,7 +173,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) else actlr &= ~(1U << 6); - vcpu->arch.cp15[c1_ACTLR] = actlr; + vcpu_cp15(vcpu, c1_ACTLR) = actlr; } /* @@ -218,9 +220,9 @@ bool access_vm_reg(struct kvm_vcpu *vcpu, BUG_ON(!p->is_write); - vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1); + vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt1); if (p->is_64bit) - vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2); + vcpu_cp15(vcpu, r->reg + 1) = *vcpu_reg(vcpu, p->Rt2); kvm_toggle_cache(vcpu, was_enabled); return true; @@ -381,17 +383,26 @@ static const struct coproc_reg cp15_regs[] = { { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar}, }; +static int check_reg_table(const struct coproc_reg *table, unsigned int n) +{ + unsigned int i; + + for (i = 1; i < n; i++) { + if (cmp_reg(&table[i-1], &table[i]) >= 0) { + kvm_err("reg table %p out of order (%d)\n", table, i - 1); + return 1; + } + } + + return 0; +} + /* Target specific emulation tables */ static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS]; void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table) { - unsigned int i; - - for (i = 1; i < table->num; i++) - BUG_ON(cmp_reg(&table->table[i-1], - &table->table[i]) >= 0); - + BUG_ON(check_reg_table(table->table, table->num)); target_tables[table->target] = table; } @@ -405,29 +416,32 @@ static const struct coproc_reg *get_target_table(unsigned target, size_t *num) return table->table; } +#define reg_to_match_value(x) \ + ({ \ + unsigned long val; \ + val = (x)->CRn << 11; \ + val |= (x)->CRm << 7; \ + val |= (x)->Op1 << 4; \ + val |= (x)->Op2 << 1; \ + val |= !(x)->is_64bit; \ + val; \ + }) + +static int match_reg(const void *key, const void *elt) +{ + const unsigned long pval = (unsigned long)key; + const struct coproc_reg *r = elt; + + return pval - reg_to_match_value(r); +} + static const struct coproc_reg *find_reg(const struct coproc_params *params, const struct coproc_reg table[], unsigned int num) { - unsigned int i; - - for (i = 0; i < num; i++) { - const struct coproc_reg *r = &table[i]; - - if (params->is_64bit != r->is_64) - continue; - if (params->CRn != r->CRn) - continue; - if (params->CRm != r->CRm) - continue; - if (params->Op1 != r->Op1) - continue; - if (params->Op2 != r->Op2) - continue; + unsigned long pval = reg_to_match_value(params); - return r; - } - return NULL; + return bsearch((void *)pval, table, num, sizeof(table[0]), match_reg); } static int emulate_cp15(struct kvm_vcpu *vcpu, @@ -645,6 +659,9 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR }, { CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 }, { CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 }, { CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 }, @@ -660,9 +677,6 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 }, { CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 }, { CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 }, - - { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, - { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, }; /* @@ -901,7 +915,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpregs[vfpid], id); } @@ -911,13 +925,13 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpexc, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpscr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); + return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst2, id); case KVM_REG_ARM_VFP_MVFR0: val = fmrx(MVFR0); return reg_to_user(uaddr, &val, id); @@ -945,7 +959,7 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_from_user(&vcpu->arch.ctxt.vfp.fpregs[vfpid], uaddr, id); } @@ -955,13 +969,13 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpexc, uaddr, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpscr, uaddr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst, uaddr, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); + return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst2, uaddr, id); /* These are invariant. */ case KVM_REG_ARM_VFP_MVFR0: if (reg_from_user(&val, uaddr, id)) @@ -1030,7 +1044,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) val = vcpu_cp15_reg64_get(vcpu, r); ret = reg_to_user(uaddr, &val, reg->id); } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + ret = reg_to_user(uaddr, &vcpu_cp15(vcpu, r->reg), reg->id); } return ret; @@ -1060,7 +1074,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!ret) vcpu_cp15_reg64_set(vcpu, r, val); } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + ret = reg_from_user(&vcpu_cp15(vcpu, r->reg), uaddr, reg->id); } return ret; @@ -1096,7 +1110,7 @@ static int write_demux_regids(u64 __user *uindices) static u64 cp15_to_index(const struct coproc_reg *reg) { u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT); - if (reg->is_64) { + if (reg->is_64bit) { val |= KVM_REG_SIZE_U64; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); /* @@ -1210,8 +1224,8 @@ void kvm_coproc_table_init(void) unsigned int i; /* Make sure tables are unique and in order. */ - for (i = 1; i < ARRAY_SIZE(cp15_regs); i++) - BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0); + BUG_ON(check_reg_table(cp15_regs, ARRAY_SIZE(cp15_regs))); + BUG_ON(check_reg_table(invariant_cp15, ARRAY_SIZE(invariant_cp15))); /* We abuse the reset function to overwrite the table itself. */ for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) @@ -1248,7 +1262,7 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) const struct coproc_reg *table; /* Catch someone adding a register without putting in reset entry. */ - memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15)); + memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15)); /* Generic chip reset first (so target could override). */ reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs)); @@ -1257,6 +1271,6 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) reset_coproc_regs(vcpu, table, num); for (num = 1; num < NR_CP15_REGS; num++) - if (vcpu->arch.cp15[num] == 0x42424242) - panic("Didn't reset vcpu->arch.cp15[%zi]", num); + if (vcpu_cp15(vcpu, num) == 0x42424242) + panic("Didn't reset vcpu_cp15(vcpu, %zi)", num); } diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index 88d24a3a9778..eef1759c2b65 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -37,7 +37,7 @@ struct coproc_reg { unsigned long Op1; unsigned long Op2; - bool is_64; + bool is_64bit; /* Trapped access from guest, if non-NULL. */ bool (*access)(struct kvm_vcpu *, @@ -47,7 +47,7 @@ struct coproc_reg { /* Initialization for vcpu. */ void (*reset)(struct kvm_vcpu *, const struct coproc_reg *); - /* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */ + /* Index into vcpu_cp15(vcpu, ...), or 0 if we don't need to save it. */ unsigned long reg; /* Value (usually reset value) */ @@ -104,25 +104,25 @@ static inline void reset_unknown(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); - vcpu->arch.cp15[r->reg] = 0xdecafbad; + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); + vcpu_cp15(vcpu, r->reg) = 0xdecafbad; } static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); - vcpu->arch.cp15[r->reg] = r->val; + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); + vcpu_cp15(vcpu, r->reg) = r->val; } static inline void reset_unknown64(struct kvm_vcpu *vcpu, const struct coproc_reg *r) { BUG_ON(!r->reg); - BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15)); + BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); - vcpu->arch.cp15[r->reg] = 0xdecafbad; - vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee; + vcpu_cp15(vcpu, r->reg) = 0xdecafbad; + vcpu_cp15(vcpu, r->reg+1) = 0xd0c0ffee; } static inline int cmp_reg(const struct coproc_reg *i1, @@ -141,7 +141,7 @@ static inline int cmp_reg(const struct coproc_reg *i1, return i1->Op1 - i2->Op1; if (i1->Op2 != i2->Op2) return i1->Op2 - i2->Op2; - return i2->is_64 - i1->is_64; + return i2->is_64bit - i1->is_64bit; } @@ -150,8 +150,8 @@ static inline int cmp_reg(const struct coproc_reg *i1, #define CRm64(_x) .CRn = _x, .CRm = 0 #define Op1(_x) .Op1 = _x #define Op2(_x) .Op2 = _x -#define is64 .is_64 = true -#define is32 .is_64 = false +#define is64 .is_64bit = true +#define is32 .is_64bit = false bool access_vm_reg(struct kvm_vcpu *vcpu, const struct coproc_params *p, diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index dc99159857b4..a494def3f195 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -112,7 +112,7 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { */ unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) { - unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs; + unsigned long *reg_array = (unsigned long *)&vcpu->arch.ctxt.gp_regs; unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { @@ -147,15 +147,15 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case SVC_MODE: - return &vcpu->arch.regs.KVM_ARM_SVC_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_SVC_spsr; case ABT_MODE: - return &vcpu->arch.regs.KVM_ARM_ABT_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_ABT_spsr; case UND_MODE: - return &vcpu->arch.regs.KVM_ARM_UND_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_UND_spsr; case IRQ_MODE: - return &vcpu->arch.regs.KVM_ARM_IRQ_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_IRQ_spsr; case FIQ_MODE: - return &vcpu->arch.regs.KVM_ARM_FIQ_spsr; + return &vcpu->arch.ctxt.gp_regs.KVM_ARM_FIQ_spsr; default: BUG(); } @@ -266,8 +266,8 @@ void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) static u32 exc_vector_base(struct kvm_vcpu *vcpu) { - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; - u32 vbar = vcpu->arch.cp15[c12_VBAR]; + u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); + u32 vbar = vcpu_cp15(vcpu, c12_VBAR); if (sctlr & SCTLR_V) return 0xffff0000; @@ -282,7 +282,7 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode) { unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode; @@ -357,22 +357,22 @@ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) if (is_pabt) { /* Set IFAR and IFSR */ - vcpu->arch.cp15[c6_IFAR] = addr; - is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + vcpu_cp15(vcpu, c6_IFAR) = addr; + is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); /* Always give debug fault for now - should give guest a clue */ if (is_lpae) - vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22; + vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22; else - vcpu->arch.cp15[c5_IFSR] = 2; + vcpu_cp15(vcpu, c5_IFSR) = 2; } else { /* !iabt */ /* Set DFAR and DFSR */ - vcpu->arch.cp15[c6_DFAR] = addr; - is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + vcpu_cp15(vcpu, c6_DFAR) = addr; + is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); /* Always give debug fault for now - should give guest a clue */ if (is_lpae) - vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22; + vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22; else - vcpu->arch.cp15[c5_DFSR] = 2; + vcpu_cp15(vcpu, c5_DFSR) = 2; } } diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 5fa69d7bae58..9093ed0f8b2a 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -25,7 +25,6 @@ #include <asm/cputype.h> #include <asm/uaccess.h> #include <asm/kvm.h> -#include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> @@ -55,7 +54,7 @@ static u64 core_reg_offset_from_id(u64 id) static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.regs; + struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; u64 off; if (KVM_REG_SIZE(reg->id) != 4) @@ -72,7 +71,7 @@ static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.regs; + struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; u64 off, val; if (KVM_REG_SIZE(reg->id) != 4) @@ -161,7 +160,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) u64 val; val = kvm_arm_timer_get_reg(vcpu, reg->id); - return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)); + return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0; } static unsigned long num_core_regs(void) diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 3ede90d8b20b..3f1ef0dbc899 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -147,13 +147,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, switch (exception_index) { case ARM_EXCEPTION_IRQ: return 1; - case ARM_EXCEPTION_UNDEFINED: - kvm_err("Undefined exception in Hyp mode at: %#08lx\n", - kvm_vcpu_get_hyp_pc(vcpu)); - BUG(); - panic("KVM: Hypervisor undefined exception!\n"); - case ARM_EXCEPTION_DATA_ABORT: - case ARM_EXCEPTION_PREF_ABORT: case ARM_EXCEPTION_HVC: /* * See ARM ARM B1.14.1: "Hyp traps on instructions diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile new file mode 100644 index 000000000000..8dfa5f7f9290 --- /dev/null +++ b/arch/arm/kvm/hyp/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for Kernel-based Virtual Machine module, HYP part +# + +KVM=../../../../virt/kvm + +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o + +obj-$(CONFIG_KVM_ARM_HOST) += tlb.o +obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += vfp.o +obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += entry.o +obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o +obj-$(CONFIG_KVM_ARM_HOST) += switch.o +obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c new file mode 100644 index 000000000000..111bda8cdebd --- /dev/null +++ b/arch/arm/kvm/hyp/banked-sr.c @@ -0,0 +1,77 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +__asm__(".arch_extension virt"); + +void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt) +{ + ctxt->gp_regs.usr_regs.ARM_sp = read_special(SP_usr); + ctxt->gp_regs.usr_regs.ARM_pc = read_special(ELR_hyp); + ctxt->gp_regs.usr_regs.ARM_cpsr = read_special(SPSR); + ctxt->gp_regs.KVM_ARM_SVC_sp = read_special(SP_svc); + ctxt->gp_regs.KVM_ARM_SVC_lr = read_special(LR_svc); + ctxt->gp_regs.KVM_ARM_SVC_spsr = read_special(SPSR_svc); + ctxt->gp_regs.KVM_ARM_ABT_sp = read_special(SP_abt); + ctxt->gp_regs.KVM_ARM_ABT_lr = read_special(LR_abt); + ctxt->gp_regs.KVM_ARM_ABT_spsr = read_special(SPSR_abt); + ctxt->gp_regs.KVM_ARM_UND_sp = read_special(SP_und); + ctxt->gp_regs.KVM_ARM_UND_lr = read_special(LR_und); + ctxt->gp_regs.KVM_ARM_UND_spsr = read_special(SPSR_und); + ctxt->gp_regs.KVM_ARM_IRQ_sp = read_special(SP_irq); + ctxt->gp_regs.KVM_ARM_IRQ_lr = read_special(LR_irq); + ctxt->gp_regs.KVM_ARM_IRQ_spsr = read_special(SPSR_irq); + ctxt->gp_regs.KVM_ARM_FIQ_r8 = read_special(R8_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_r9 = read_special(R9_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_r10 = read_special(R10_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_fp = read_special(R11_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_ip = read_special(R12_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_sp = read_special(SP_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_lr = read_special(LR_fiq); + ctxt->gp_regs.KVM_ARM_FIQ_spsr = read_special(SPSR_fiq); +} + +void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt) +{ + write_special(ctxt->gp_regs.usr_regs.ARM_sp, SP_usr); + write_special(ctxt->gp_regs.usr_regs.ARM_pc, ELR_hyp); + write_special(ctxt->gp_regs.usr_regs.ARM_cpsr, SPSR_cxsf); + write_special(ctxt->gp_regs.KVM_ARM_SVC_sp, SP_svc); + write_special(ctxt->gp_regs.KVM_ARM_SVC_lr, LR_svc); + write_special(ctxt->gp_regs.KVM_ARM_SVC_spsr, SPSR_svc); + write_special(ctxt->gp_regs.KVM_ARM_ABT_sp, SP_abt); + write_special(ctxt->gp_regs.KVM_ARM_ABT_lr, LR_abt); + write_special(ctxt->gp_regs.KVM_ARM_ABT_spsr, SPSR_abt); + write_special(ctxt->gp_regs.KVM_ARM_UND_sp, SP_und); + write_special(ctxt->gp_regs.KVM_ARM_UND_lr, LR_und); + write_special(ctxt->gp_regs.KVM_ARM_UND_spsr, SPSR_und); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_sp, SP_irq); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_lr, LR_irq); + write_special(ctxt->gp_regs.KVM_ARM_IRQ_spsr, SPSR_irq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r8, R8_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r9, R9_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_r10, R10_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_fp, R11_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_ip, R12_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_sp, SP_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_lr, LR_fiq); + write_special(ctxt->gp_regs.KVM_ARM_FIQ_spsr, SPSR_fiq); +} diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c new file mode 100644 index 000000000000..c4782812714c --- /dev/null +++ b/arch/arm/kvm/hyp/cp15-sr.c @@ -0,0 +1,84 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx) +{ + return (u64 *)(ctxt->cp15 + idx); +} + +void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) +{ + ctxt->cp15[c0_MPIDR] = read_sysreg(VMPIDR); + ctxt->cp15[c0_CSSELR] = read_sysreg(CSSELR); + ctxt->cp15[c1_SCTLR] = read_sysreg(SCTLR); + ctxt->cp15[c1_CPACR] = read_sysreg(CPACR); + *cp15_64(ctxt, c2_TTBR0) = read_sysreg(TTBR0); + *cp15_64(ctxt, c2_TTBR1) = read_sysreg(TTBR1); + ctxt->cp15[c2_TTBCR] = read_sysreg(TTBCR); + ctxt->cp15[c3_DACR] = read_sysreg(DACR); + ctxt->cp15[c5_DFSR] = read_sysreg(DFSR); + ctxt->cp15[c5_IFSR] = read_sysreg(IFSR); + ctxt->cp15[c5_ADFSR] = read_sysreg(ADFSR); + ctxt->cp15[c5_AIFSR] = read_sysreg(AIFSR); + ctxt->cp15[c6_DFAR] = read_sysreg(DFAR); + ctxt->cp15[c6_IFAR] = read_sysreg(IFAR); + *cp15_64(ctxt, c7_PAR) = read_sysreg(PAR); + ctxt->cp15[c10_PRRR] = read_sysreg(PRRR); + ctxt->cp15[c10_NMRR] = read_sysreg(NMRR); + ctxt->cp15[c10_AMAIR0] = read_sysreg(AMAIR0); + ctxt->cp15[c10_AMAIR1] = read_sysreg(AMAIR1); + ctxt->cp15[c12_VBAR] = read_sysreg(VBAR); + ctxt->cp15[c13_CID] = read_sysreg(CID); + ctxt->cp15[c13_TID_URW] = read_sysreg(TID_URW); + ctxt->cp15[c13_TID_URO] = read_sysreg(TID_URO); + ctxt->cp15[c13_TID_PRIV] = read_sysreg(TID_PRIV); + ctxt->cp15[c14_CNTKCTL] = read_sysreg(CNTKCTL); +} + +void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt) +{ + write_sysreg(ctxt->cp15[c0_MPIDR], VMPIDR); + write_sysreg(ctxt->cp15[c0_CSSELR], CSSELR); + write_sysreg(ctxt->cp15[c1_SCTLR], SCTLR); + write_sysreg(ctxt->cp15[c1_CPACR], CPACR); + write_sysreg(*cp15_64(ctxt, c2_TTBR0), TTBR0); + write_sysreg(*cp15_64(ctxt, c2_TTBR1), TTBR1); + write_sysreg(ctxt->cp15[c2_TTBCR], TTBCR); + write_sysreg(ctxt->cp15[c3_DACR], DACR); + write_sysreg(ctxt->cp15[c5_DFSR], DFSR); + write_sysreg(ctxt->cp15[c5_IFSR], IFSR); + write_sysreg(ctxt->cp15[c5_ADFSR], ADFSR); + write_sysreg(ctxt->cp15[c5_AIFSR], AIFSR); + write_sysreg(ctxt->cp15[c6_DFAR], DFAR); + write_sysreg(ctxt->cp15[c6_IFAR], IFAR); + write_sysreg(*cp15_64(ctxt, c7_PAR), PAR); + write_sysreg(ctxt->cp15[c10_PRRR], PRRR); + write_sysreg(ctxt->cp15[c10_NMRR], NMRR); + write_sysreg(ctxt->cp15[c10_AMAIR0], AMAIR0); + write_sysreg(ctxt->cp15[c10_AMAIR1], AMAIR1); + write_sysreg(ctxt->cp15[c12_VBAR], VBAR); + write_sysreg(ctxt->cp15[c13_CID], CID); + write_sysreg(ctxt->cp15[c13_TID_URW], TID_URW); + write_sysreg(ctxt->cp15[c13_TID_URO], TID_URO); + write_sysreg(ctxt->cp15[c13_TID_PRIV], TID_PRIV); + write_sysreg(ctxt->cp15[c14_CNTKCTL], CNTKCTL); +} diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S new file mode 100644 index 000000000000..21c238871c9e --- /dev/null +++ b/arch/arm/kvm/hyp/entry.S @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2016 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/kvm_arm.h> + + .arch_extension virt + + .text + .pushsection .hyp.text, "ax" + +#define USR_REGS_OFFSET (CPU_CTXT_GP_REGS + GP_REGS_USR) + +/* int __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host) */ +ENTRY(__guest_enter) + @ Save host registers + add r1, r1, #(USR_REGS_OFFSET + S_R4) + stm r1!, {r4-r12} + str lr, [r1, #4] @ Skip SP_usr (already saved) + + @ Restore guest registers + add r0, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) + ldr lr, [r0, #S_LR] + ldm r0, {r0-r12} + + clrex + eret +ENDPROC(__guest_enter) + +ENTRY(__guest_exit) + /* + * return convention: + * guest r0, r1, r2 saved on the stack + * r0: vcpu pointer + * r1: exception code + */ + + add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R3) + stm r2!, {r3-r12} + str lr, [r2, #4] + add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) + pop {r3, r4, r5} @ r0, r1, r2 + stm r2, {r3-r5} + + ldr r0, [r0, #VCPU_HOST_CTXT] + add r0, r0, #(USR_REGS_OFFSET + S_R4) + ldm r0!, {r4-r12} + ldr lr, [r0, #4] + + mov r0, r1 + bx lr +ENDPROC(__guest_exit) + +/* + * If VFPv3 support is not available, then we will not switch the VFP + * registers; however cp10 and cp11 accesses will still trap and fallback + * to the regular coprocessor emulation code, which currently will + * inject an undefined exception to the guest. + */ +#ifdef CONFIG_VFPv3 +ENTRY(__vfp_guest_restore) + push {r3, r4, lr} + + @ NEON/VFP used. Turn on VFP access. + mrc p15, 4, r1, c1, c1, 2 @ HCPTR + bic r1, r1, #(HCPTR_TCP(10) | HCPTR_TCP(11)) + mcr p15, 4, r1, c1, c1, 2 @ HCPTR + isb + + @ Switch VFP/NEON hardware state to the guest's + mov r4, r0 + ldr r0, [r0, #VCPU_HOST_CTXT] + add r0, r0, #CPU_CTXT_VFP + bl __vfp_save_state + add r0, r4, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP) + bl __vfp_restore_state + + pop {r3, r4, lr} + pop {r0, r1, r2} + clrex + eret +ENDPROC(__vfp_guest_restore) +#endif + + .popsection + diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S new file mode 100644 index 000000000000..78091383a5d9 --- /dev/null +++ b/arch/arm/kvm/hyp/hyp-entry.S @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/linkage.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> + + .arch_extension virt + + .text + .pushsection .hyp.text, "ax" + +.macro load_vcpu reg + mrc p15, 4, \reg, c13, c0, 2 @ HTPIDR +.endm + +/******************************************************************** + * Hypervisor exception vector and handlers + * + * + * The KVM/ARM Hypervisor ABI is defined as follows: + * + * Entry to Hyp mode from the host kernel will happen _only_ when an HVC + * instruction is issued since all traps are disabled when running the host + * kernel as per the Hyp-mode initialization at boot time. + * + * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc + * below) when the HVC instruction is called from SVC mode (i.e. a guest or the + * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC + * instructions are called from within Hyp-mode. + * + * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): + * Switching to Hyp mode is done through a simple HVC #0 instruction. The + * exception vector code will check that the HVC comes from VMID==0. + * - r0 contains a pointer to a HYP function + * - r1, r2, and r3 contain arguments to the above function. + * - The HYP function will be called with its arguments in r0, r1 and r2. + * On HYP function return, we return directly to SVC. + * + * Note that the above is used to execute code in Hyp-mode from a host-kernel + * point of view, and is a different concept from performing a world-switch and + * executing guest code SVC mode (with a VMID != 0). + */ + + .align 5 +__kvm_hyp_vector: + .global __kvm_hyp_vector + + @ Hyp-mode exception vector + W(b) hyp_reset + W(b) hyp_undef + W(b) hyp_svc + W(b) hyp_pabt + W(b) hyp_dabt + W(b) hyp_hvc + W(b) hyp_irq + W(b) hyp_fiq + +.macro invalid_vector label, cause + .align +\label: mov r0, #\cause + b __hyp_panic +.endm + + invalid_vector hyp_reset ARM_EXCEPTION_RESET + invalid_vector hyp_undef ARM_EXCEPTION_UNDEFINED + invalid_vector hyp_svc ARM_EXCEPTION_SOFTWARE + invalid_vector hyp_pabt ARM_EXCEPTION_PREF_ABORT + invalid_vector hyp_dabt ARM_EXCEPTION_DATA_ABORT + invalid_vector hyp_fiq ARM_EXCEPTION_FIQ + +ENTRY(__hyp_do_panic) + mrs lr, cpsr + bic lr, lr, #MODE_MASK + orr lr, lr, #SVC_MODE +THUMB( orr lr, lr, #PSR_T_BIT ) + msr spsr_cxsf, lr + ldr lr, =panic + msr ELR_hyp, lr + ldr lr, =kvm_call_hyp + clrex + eret +ENDPROC(__hyp_do_panic) + +hyp_hvc: + /* + * Getting here is either because of a trap from a guest, + * or from executing HVC from the host kernel, which means + * "do something in Hyp mode". + */ + push {r0, r1, r2} + + @ Check syndrome register + mrc p15, 4, r1, c5, c2, 0 @ HSR + lsr r0, r1, #HSR_EC_SHIFT + cmp r0, #HSR_EC_HVC + bne guest_trap @ Not HVC instr. + + /* + * Let's check if the HVC came from VMID 0 and allow simple + * switch to Hyp mode + */ + mrrc p15, 6, r0, r2, c2 + lsr r2, r2, #16 + and r2, r2, #0xff + cmp r2, #0 + bne guest_trap @ Guest called HVC + + /* + * Getting here means host called HVC, we shift parameters and branch + * to Hyp function. + */ + pop {r0, r1, r2} + + /* Check for __hyp_get_vectors */ + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + beq 1f + + push {lr} + + mov lr, r0 + mov r0, r1 + mov r1, r2 + mov r2, r3 + +THUMB( orr lr, #1) + blx lr @ Call the HYP function + + pop {lr} +1: eret + +guest_trap: + load_vcpu r0 @ Load VCPU pointer to r0 + +#ifdef CONFIG_VFPv3 + @ Check for a VFP access + lsr r1, r1, #HSR_EC_SHIFT + cmp r1, #HSR_EC_CP_0_13 + beq __vfp_guest_restore +#endif + + mov r1, #ARM_EXCEPTION_HVC + b __guest_exit + +hyp_irq: + push {r0, r1, r2} + mov r1, #ARM_EXCEPTION_IRQ + load_vcpu r0 @ Load VCPU pointer to r0 + b __guest_exit + + .ltorg + + .popsection diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c new file mode 100644 index 000000000000..7be39af2ed6c --- /dev/null +++ b/arch/arm/kvm/hyp/s2-setup.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2016 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/types.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_hyp.h> + +void __hyp_text __init_stage2_translation(void) +{ + u64 val; + + val = read_sysreg(VTCR) & ~VTCR_MASK; + + val |= read_sysreg(HTCR) & VTCR_HTCR_SH; + val |= KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S; + + write_sysreg(val, VTCR); +} diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c new file mode 100644 index 000000000000..b13caa90cd44 --- /dev/null +++ b/arch/arm/kvm/hyp/switch.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_asm.h> +#include <asm/kvm_hyp.h> + +__asm__(".arch_extension virt"); + +/* + * Activate the traps, saving the host's fpexc register before + * overwriting it. We'll restore it on VM exit. + */ +static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host) +{ + u32 val; + + /* + * We are about to set HCPTR.TCP10/11 to trap all floating point + * register accesses to HYP, however, the ARM ARM clearly states that + * traps are only taken to HYP if the operation would not otherwise + * trap to SVC. Therefore, always make sure that for 32-bit guests, + * we set FPEXC.EN to prevent traps to SVC, when setting the TCP bits. + */ + val = read_sysreg(VFP_FPEXC); + *fpexc_host = val; + if (!(val & FPEXC_EN)) { + write_sysreg(val | FPEXC_EN, VFP_FPEXC); + isb(); + } + + write_sysreg(vcpu->arch.hcr | vcpu->arch.irq_lines, HCR); + /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ + write_sysreg(HSTR_T(15), HSTR); + write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR); + val = read_sysreg(HDCR); + write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR); +} + +static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) +{ + u32 val; + + write_sysreg(0, HCR); + write_sysreg(0, HSTR); + val = read_sysreg(HDCR); + write_sysreg(val & ~(HDCR_TPM | HDCR_TPMCR), HDCR); + write_sysreg(0, HCPTR); +} + +static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(vcpu->kvm); + write_sysreg(kvm->arch.vttbr, VTTBR); + write_sysreg(vcpu->arch.midr, VPIDR); +} + +static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) +{ + write_sysreg(0, VTTBR); + write_sysreg(read_sysreg(MIDR), VPIDR); +} + +static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu) +{ + __vgic_v2_save_state(vcpu); +} + +static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu) +{ + __vgic_v2_restore_state(vcpu); +} + +static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) +{ + u32 hsr = read_sysreg(HSR); + u8 ec = hsr >> HSR_EC_SHIFT; + u32 hpfar, far; + + vcpu->arch.fault.hsr = hsr; + + if (ec == HSR_EC_IABT) + far = read_sysreg(HIFAR); + else if (ec == HSR_EC_DABT) + far = read_sysreg(HDFAR); + else + return true; + + /* + * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: + * + * Abort on the stage 2 translation for a memory access from a + * Non-secure PL1 or PL0 mode: + * + * For any Access flag fault or Translation fault, and also for any + * Permission fault on the stage 2 translation of a memory access + * made as part of a translation table walk for a stage 1 translation, + * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR + * is UNKNOWN. + */ + if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) { + u64 par, tmp; + + par = read_sysreg(PAR); + write_sysreg(far, ATS1CPR); + isb(); + + tmp = read_sysreg(PAR); + write_sysreg(par, PAR); + + if (unlikely(tmp & 1)) + return false; /* Translation failed, back to guest */ + + hpfar = ((tmp >> 12) & ((1UL << 28) - 1)) << 4; + } else { + hpfar = read_sysreg(HPFAR); + } + + vcpu->arch.fault.hxfar = far; + vcpu->arch.fault.hpfar = hpfar; + return true; +} + +static int __hyp_text __guest_run(struct kvm_vcpu *vcpu) +{ + struct kvm_cpu_context *host_ctxt; + struct kvm_cpu_context *guest_ctxt; + bool fp_enabled; + u64 exit_code; + u32 fpexc; + + vcpu = kern_hyp_va(vcpu); + write_sysreg(vcpu, HTPIDR); + + host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + guest_ctxt = &vcpu->arch.ctxt; + + __sysreg_save_state(host_ctxt); + __banked_save_state(host_ctxt); + + __activate_traps(vcpu, &fpexc); + __activate_vm(vcpu); + + __vgic_restore_state(vcpu); + __timer_restore_state(vcpu); + + __sysreg_restore_state(guest_ctxt); + __banked_restore_state(guest_ctxt); + + /* Jump in the fire! */ +again: + exit_code = __guest_enter(vcpu, host_ctxt); + /* And we're baaack! */ + + if (exit_code == ARM_EXCEPTION_HVC && !__populate_fault_info(vcpu)) + goto again; + + fp_enabled = __vfp_enabled(); + + __banked_save_state(guest_ctxt); + __sysreg_save_state(guest_ctxt); + __timer_save_state(vcpu); + __vgic_save_state(vcpu); + + __deactivate_traps(vcpu); + __deactivate_vm(vcpu); + + __banked_restore_state(host_ctxt); + __sysreg_restore_state(host_ctxt); + + if (fp_enabled) { + __vfp_save_state(&guest_ctxt->vfp); + __vfp_restore_state(&host_ctxt->vfp); + } + + write_sysreg(fpexc, VFP_FPEXC); + + return exit_code; +} + +__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu); + +static const char * const __hyp_panic_string[] = { + [ARM_EXCEPTION_RESET] = "\nHYP panic: RST PC:%08x CPSR:%08x", + [ARM_EXCEPTION_UNDEFINED] = "\nHYP panic: UNDEF PC:%08x CPSR:%08x", + [ARM_EXCEPTION_SOFTWARE] = "\nHYP panic: SVC PC:%08x CPSR:%08x", + [ARM_EXCEPTION_PREF_ABORT] = "\nHYP panic: PABRT PC:%08x CPSR:%08x", + [ARM_EXCEPTION_DATA_ABORT] = "\nHYP panic: DABRT PC:%08x ADDR:%08x", + [ARM_EXCEPTION_IRQ] = "\nHYP panic: IRQ PC:%08x CPSR:%08x", + [ARM_EXCEPTION_FIQ] = "\nHYP panic: FIQ PC:%08x CPSR:%08x", + [ARM_EXCEPTION_HVC] = "\nHYP panic: HVC PC:%08x CPSR:%08x", +}; + +void __hyp_text __noreturn __hyp_panic(int cause) +{ + u32 elr = read_special(ELR_hyp); + u32 val; + + if (cause == ARM_EXCEPTION_DATA_ABORT) + val = read_sysreg(HDFAR); + else + val = read_special(SPSR); + + if (read_sysreg(VTTBR)) { + struct kvm_vcpu *vcpu; + struct kvm_cpu_context *host_ctxt; + + vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); + host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + __deactivate_traps(vcpu); + __deactivate_vm(vcpu); + __sysreg_restore_state(host_ctxt); + } + + /* Call panic for real */ + __hyp_do_panic(__hyp_panic_string[cause], elr, val); + + unreachable(); +} diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c new file mode 100644 index 000000000000..a2636001e616 --- /dev/null +++ b/arch/arm/kvm/hyp/tlb.c @@ -0,0 +1,70 @@ +/* + * Original code: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/kvm_hyp.h> + +/** + * Flush per-VMID TLBs + * + * __kvm_tlb_flush_vmid(struct kvm *kvm); + * + * We rely on the hardware to broadcast the TLB invalidation to all CPUs + * inside the inner-shareable domain (which is the case for all v7 + * implementations). If we come across a non-IS SMP implementation, we'll + * have to use an IPI based mechanism. Until then, we stick to the simple + * hardware assisted version. + * + * As v7 does not support flushing per IPA, just nuke the whole TLB + * instead, ignoring the ipa value. + */ +static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) +{ + dsb(ishst); + + /* Switch to requested VMID */ + kvm = kern_hyp_va(kvm); + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALLIS); + dsb(ish); + isb(); + + write_sysreg(0, VTTBR); +} + +__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm); + +static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) +{ + __tlb_flush_vmid(kvm); +} + +__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, + phys_addr_t ipa); + +static void __hyp_text __tlb_flush_vm_context(void) +{ + write_sysreg(0, TLBIALLNSNHIS); + write_sysreg(0, ICIALLUIS); + dsb(ish); +} + +__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void); diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S new file mode 100644 index 000000000000..7c297e87eb8b --- /dev/null +++ b/arch/arm/kvm/hyp/vfp.S @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/linkage.h> +#include <asm/vfpmacros.h> + + .text + .pushsection .hyp.text, "ax" + +/* void __vfp_save_state(struct vfp_hard_struct *vfp); */ +ENTRY(__vfp_save_state) + push {r4, r5} + VFPFMRX r1, FPEXC + + @ Make sure *really* VFP is enabled so we can touch the registers. + orr r5, r1, #FPEXC_EN + tst r5, #FPEXC_EX @ Check for VFP Subarchitecture + bic r5, r5, #FPEXC_EX @ FPEXC_EX disable + VFPFMXR FPEXC, r5 + isb + + VFPFMRX r2, FPSCR + beq 1f + + @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so + @ we only need to save them if FPEXC_EX is set. + VFPFMRX r3, FPINST + tst r5, #FPEXC_FP2V + VFPFMRX r4, FPINST2, ne @ vmrsne +1: + VFPFSTMIA r0, r5 @ Save VFP registers + stm r0, {r1-r4} @ Save FPEXC, FPSCR, FPINST, FPINST2 + pop {r4, r5} + bx lr +ENDPROC(__vfp_save_state) + +/* void __vfp_restore_state(struct vfp_hard_struct *vfp); + * Assume FPEXC_EN is on and FPEXC_EX is off */ +ENTRY(__vfp_restore_state) + VFPFLDMIA r0, r1 @ Load VFP registers + ldm r0, {r0-r3} @ Load FPEXC, FPSCR, FPINST, FPINST2 + + VFPFMXR FPSCR, r1 + tst r0, #FPEXC_EX @ Check for VFP Subarchitecture + beq 1f + VFPFMXR FPINST, r2 + tst r0, #FPEXC_FP2V + VFPFMXR FPINST2, r3, ne +1: + VFPFMXR FPEXC, r0 @ FPEXC (last, in case !EN) + bx lr +ENDPROC(__vfp_restore_state) + + .popsection diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 3988e72d16ff..1f9ae17476f9 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -84,14 +84,6 @@ __do_hyp_init: orr r0, r0, r1 mcr p15, 4, r0, c2, c0, 2 @ HTCR - mrc p15, 4, r1, c2, c1, 2 @ VTCR - ldr r2, =VTCR_MASK - bic r1, r1, r2 - bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits - orr r1, r0, r1 - orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S) - mcr p15, 4, r1, c2, c1, 2 @ VTCR - @ Use the same memory attributes for hyp. accesses as the kernel @ (copy MAIRx ro HMAIRx). mrc p15, 0, r0, c10, c2, 0 diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 900ef6dd8f72..b1bd316f14c0 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -17,211 +17,14 @@ */ #include <linux/linkage.h> -#include <linux/const.h> -#include <asm/unified.h> -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/asm-offsets.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_arm.h> -#include <asm/vfpmacros.h> -#include "interrupts_head.S" .text -__kvm_hyp_code_start: - .globl __kvm_hyp_code_start - -/******************************************************************** - * Flush per-VMID TLBs - * - * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); - * - * We rely on the hardware to broadcast the TLB invalidation to all CPUs - * inside the inner-shareable domain (which is the case for all v7 - * implementations). If we come across a non-IS SMP implementation, we'll - * have to use an IPI based mechanism. Until then, we stick to the simple - * hardware assisted version. - * - * As v7 does not support flushing per IPA, just nuke the whole TLB - * instead, ignoring the ipa value. - */ -ENTRY(__kvm_tlb_flush_vmid_ipa) - push {r2, r3} - - dsb ishst - add r0, r0, #KVM_VTTBR - ldrd r2, r3, [r0] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - isb - mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) - dsb ish - isb - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 - isb @ Not necessary if followed by eret - - pop {r2, r3} - bx lr -ENDPROC(__kvm_tlb_flush_vmid_ipa) - -/** - * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs - * - * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address - * parameter - */ - -ENTRY(__kvm_tlb_flush_vmid) - b __kvm_tlb_flush_vmid_ipa -ENDPROC(__kvm_tlb_flush_vmid) - -/******************************************************************** - * Flush TLBs and instruction caches of all CPUs inside the inner-shareable - * domain, for all VMIDs - * - * void __kvm_flush_vm_context(void); - */ -ENTRY(__kvm_flush_vm_context) - mov r0, #0 @ rn parameter for c15 flushes is SBZ - - /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */ - mcr p15, 4, r0, c8, c3, 4 - /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */ - mcr p15, 0, r0, c7, c1, 0 - dsb ish - isb @ Not necessary if followed by eret - - bx lr -ENDPROC(__kvm_flush_vm_context) - - -/******************************************************************** - * Hypervisor world-switch code - * - * - * int __kvm_vcpu_run(struct kvm_vcpu *vcpu) - */ -ENTRY(__kvm_vcpu_run) - @ Save the vcpu pointer - mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR - - save_host_regs - - restore_vgic_state - restore_timer_state - - @ Store hardware CP15 state and load guest state - read_cp15_state store_to_vcpu = 0 - write_cp15_state read_from_vcpu = 1 - - @ If the host kernel has not been configured with VFPv3 support, - @ then it is safer if we deny guests from using it as well. -#ifdef CONFIG_VFPv3 - @ Set FPEXC_EN so the guest doesn't trap floating point instructions - VFPFMRX r2, FPEXC @ VMRS - push {r2} - orr r2, r2, #FPEXC_EN - VFPFMXR FPEXC, r2 @ VMSR -#endif - - @ Configure Hyp-role - configure_hyp_role vmentry - - @ Trap coprocessor CRx accesses - set_hstr vmentry - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) - set_hdcr vmentry - - @ Write configured ID register into MIDR alias - ldr r1, [vcpu, #VCPU_MIDR] - mcr p15, 4, r1, c0, c0, 0 - - @ Write guest view of MPIDR into VMPIDR - ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)] - mcr p15, 4, r1, c0, c0, 5 - - @ Set up guest memory translation - ldr r1, [vcpu, #VCPU_KVM] - add r1, r1, #KVM_VTTBR - ldrd r2, r3, [r1] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - - @ We're all done, just restore the GPRs and go to the guest - restore_guest_regs - clrex @ Clear exclusive monitor - eret - -__kvm_vcpu_return: - /* - * return convention: - * guest r0, r1, r2 saved on the stack - * r0: vcpu pointer - * r1: exception code - */ - save_guest_regs - - @ Set VMID == 0 - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Write VTTBR - - @ Don't trap coprocessor accesses for host kernel - set_hstr vmexit - set_hdcr vmexit - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore - -#ifdef CONFIG_VFPv3 - @ Switch VFP/NEON hardware state to the host's - add r7, vcpu, #VCPU_VFP_GUEST - store_vfp_state r7 - add r7, vcpu, #VCPU_VFP_HOST - ldr r7, [r7] - restore_vfp_state r7 - -after_vfp_restore: - @ Restore FPEXC_EN which we clobbered on entry - pop {r2} - VFPFMXR FPEXC, r2 -#else -after_vfp_restore: -#endif - - @ Reset Hyp-role - configure_hyp_role vmexit - - @ Let host read hardware MIDR - mrc p15, 0, r2, c0, c0, 0 - mcr p15, 4, r2, c0, c0, 0 - - @ Back to hardware MPIDR - mrc p15, 0, r2, c0, c0, 5 - mcr p15, 4, r2, c0, c0, 5 - - @ Store guest CP15 state and restore host state - read_cp15_state store_to_vcpu = 1 - write_cp15_state read_from_vcpu = 0 - - save_timer_state - save_vgic_state - - restore_host_regs - clrex @ Clear exclusive monitor -#ifndef CONFIG_CPU_ENDIAN_BE8 - mov r0, r1 @ Return the return code - mov r1, #0 @ Clear upper bits in return value -#else - @ r1 already has return code - mov r0, #0 @ Clear upper bits in return value -#endif /* CONFIG_CPU_ENDIAN_BE8 */ - bx lr @ return to IOCTL - /******************************************************************** * Call function in Hyp mode * * - * u64 kvm_call_hyp(void *hypfn, ...); + * unsigned long kvm_call_hyp(void *hypfn, ...); * * This is not really a variadic function in the classic C-way and care must * be taken when calling this to ensure parameters are passed in registers @@ -232,7 +35,7 @@ after_vfp_restore: * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the * function pointer can be passed). The function being called must be mapped * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are - * passed in r0 and r1. + * passed in r0 (strictly 32bit). * * A function pointer with a value of 0xffffffff has a special meaning, * and is used to implement __hyp_get_vectors in the same way as in @@ -246,281 +49,4 @@ after_vfp_restore: ENTRY(kvm_call_hyp) hvc #0 bx lr - -/******************************************************************** - * Hypervisor exception vector and handlers - * - * - * The KVM/ARM Hypervisor ABI is defined as follows: - * - * Entry to Hyp mode from the host kernel will happen _only_ when an HVC - * instruction is issued since all traps are disabled when running the host - * kernel as per the Hyp-mode initialization at boot time. - * - * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc - * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC - * instructions are called from within Hyp-mode. - * - * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): - * Switching to Hyp mode is done through a simple HVC #0 instruction. The - * exception vector code will check that the HVC comes from VMID==0 and if - * so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - * - r0 contains a pointer to a HYP function - * - r1, r2, and r3 contain arguments to the above function. - * - The HYP function will be called with its arguments in r0, r1 and r2. - * On HYP function return, we return directly to SVC. - * - * Note that the above is used to execute code in Hyp-mode from a host-kernel - * point of view, and is a different concept from performing a world-switch and - * executing guest code SVC mode (with a VMID != 0). - */ - -/* Handle undef, svc, pabt, or dabt by crashing with a user notice */ -.macro bad_exception exception_code, panic_str - push {r0-r2} - mrrc p15, 6, r0, r1, c2 @ Read VTTBR - lsr r1, r1, #16 - ands r1, r1, #0xff - beq 99f - - load_vcpu @ Load VCPU pointer - .if \exception_code == ARM_EXCEPTION_DATA_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 0 @ HDFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - .if \exception_code == ARM_EXCEPTION_PREF_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 2 @ HIFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - mov r1, #\exception_code - b __kvm_vcpu_return - - @ We were in the host already. Let's craft a panic-ing return to SVC. -99: mrs r2, cpsr - bic r2, r2, #MODE_MASK - orr r2, r2, #SVC_MODE -THUMB( orr r2, r2, #PSR_T_BIT ) - msr spsr_cxsf, r2 - mrs r1, ELR_hyp - ldr r2, =panic - msr ELR_hyp, r2 - ldr r0, =\panic_str - clrex @ Clear exclusive monitor - eret -.endm - - .text - - .align 5 -__kvm_hyp_vector: - .globl __kvm_hyp_vector - - @ Hyp-mode exception vector - W(b) hyp_reset - W(b) hyp_undef - W(b) hyp_svc - W(b) hyp_pabt - W(b) hyp_dabt - W(b) hyp_hvc - W(b) hyp_irq - W(b) hyp_fiq - - .align -hyp_reset: - b hyp_reset - - .align -hyp_undef: - bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str - - .align -hyp_svc: - bad_exception ARM_EXCEPTION_HVC, svc_die_str - - .align -hyp_pabt: - bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str - - .align -hyp_dabt: - bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str - - .align -hyp_hvc: - /* - * Getting here is either becuase of a trap from a guest or from calling - * HVC from the host kernel, which means "switch to Hyp mode". - */ - push {r0, r1, r2} - - @ Check syndrome register - mrc p15, 4, r1, c5, c2, 0 @ HSR - lsr r0, r1, #HSR_EC_SHIFT - cmp r0, #HSR_EC_HVC - bne guest_trap @ Not HVC instr. - - /* - * Let's check if the HVC came from VMID 0 and allow simple - * switch to Hyp mode - */ - mrrc p15, 6, r0, r2, c2 - lsr r2, r2, #16 - and r2, r2, #0xff - cmp r2, #0 - bne guest_trap @ Guest called HVC - - /* - * Getting here means host called HVC, we shift parameters and branch - * to Hyp function. - */ - pop {r0, r1, r2} - - /* Check for __hyp_get_vectors */ - cmp r0, #-1 - mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR - beq 1f - - push {lr} - mrs lr, SPSR - push {lr} - - mov lr, r0 - mov r0, r1 - mov r1, r2 - mov r2, r3 - -THUMB( orr lr, #1) - blx lr @ Call the HYP function - - pop {lr} - msr SPSR_csxf, lr - pop {lr} -1: eret - -guest_trap: - load_vcpu @ Load VCPU pointer to r0 - str r1, [vcpu, #VCPU_HSR] - - @ Check if we need the fault information - lsr r1, r1, #HSR_EC_SHIFT -#ifdef CONFIG_VFPv3 - cmp r1, #HSR_EC_CP_0_13 - beq switch_to_guest_vfp -#endif - cmp r1, #HSR_EC_IABT - mrceq p15, 4, r2, c6, c0, 2 @ HIFAR - beq 2f - cmp r1, #HSR_EC_DABT - bne 1f - mrc p15, 4, r2, c6, c0, 0 @ HDFAR - -2: str r2, [vcpu, #VCPU_HxFAR] - - /* - * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: - * - * Abort on the stage 2 translation for a memory access from a - * Non-secure PL1 or PL0 mode: - * - * For any Access flag fault or Translation fault, and also for any - * Permission fault on the stage 2 translation of a memory access - * made as part of a translation table walk for a stage 1 translation, - * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR - * is UNKNOWN. - */ - - /* Check for permission fault, and S1PTW */ - mrc p15, 4, r1, c5, c2, 0 @ HSR - and r0, r1, #HSR_FSC_TYPE - cmp r0, #FSC_PERM - tsteq r1, #(1 << 7) @ S1PTW - mrcne p15, 4, r2, c6, c0, 4 @ HPFAR - bne 3f - - /* Preserve PAR */ - mrrc p15, 0, r0, r1, c7 @ PAR - push {r0, r1} - - /* Resolve IPA using the xFAR */ - mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR - isb - mrrc p15, 0, r0, r1, c7 @ PAR - tst r0, #1 - bne 4f @ Failed translation - ubfx r2, r0, #12, #20 - lsl r2, r2, #4 - orr r2, r2, r1, lsl #24 - - /* Restore PAR */ - pop {r0, r1} - mcrr p15, 0, r0, r1, c7 @ PAR - -3: load_vcpu @ Load VCPU pointer to r0 - str r2, [r0, #VCPU_HPFAR] - -1: mov r1, #ARM_EXCEPTION_HVC - b __kvm_vcpu_return - -4: pop {r0, r1} @ Failed translation, return to guest - mcrr p15, 0, r0, r1, c7 @ PAR - clrex - pop {r0, r1, r2} - eret - -/* - * If VFPv3 support is not available, then we will not switch the VFP - * registers; however cp10 and cp11 accesses will still trap and fallback - * to the regular coprocessor emulation code, which currently will - * inject an undefined exception to the guest. - */ -#ifdef CONFIG_VFPv3 -switch_to_guest_vfp: - push {r3-r7} - - @ NEON/VFP used. Turn on VFP access. - set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) - - @ Switch VFP/NEON hardware state to the guest's - add r7, r0, #VCPU_VFP_HOST - ldr r7, [r7] - store_vfp_state r7 - add r7, r0, #VCPU_VFP_GUEST - restore_vfp_state r7 - - pop {r3-r7} - pop {r0-r2} - clrex - eret -#endif - - .align -hyp_irq: - push {r0, r1, r2} - mov r1, #ARM_EXCEPTION_IRQ - load_vcpu @ Load VCPU pointer to r0 - b __kvm_vcpu_return - - .align -hyp_fiq: - b hyp_fiq - - .ltorg - -__kvm_hyp_code_end: - .globl __kvm_hyp_code_end - - .section ".rodata" - -und_die_str: - .ascii "unexpected undefined exception in Hyp mode at: %#08x\n" -pabt_die_str: - .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n" -dabt_die_str: - .ascii "unexpected data abort in Hyp mode at: %#08x\n" -svc_die_str: - .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n" +ENDPROC(kvm_call_hyp) diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S deleted file mode 100644 index 51a59504bef4..000000000000 --- a/arch/arm/kvm/interrupts_head.S +++ /dev/null @@ -1,648 +0,0 @@ -#include <linux/irqchip/arm-gic.h> -#include <asm/assembler.h> - -#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) -#define VCPU_USR_SP (VCPU_USR_REG(13)) -#define VCPU_USR_LR (VCPU_USR_REG(14)) -#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4)) - -/* - * Many of these macros need to access the VCPU structure, which is always - * held in r0. These macros should never clobber r1, as it is used to hold the - * exception code on the return path (except of course the macro that switches - * all the registers before the final jump to the VM). - */ -vcpu .req r0 @ vcpu pointer always in r0 - -/* Clobbers {r2-r6} */ -.macro store_vfp_state vfp_base - @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions - VFPFMRX r2, FPEXC - @ Make sure VFP is enabled so we can touch the registers. - orr r6, r2, #FPEXC_EN - VFPFMXR FPEXC, r6 - - VFPFMRX r3, FPSCR - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so - @ we only need to save them if FPEXC_EX is set. - VFPFMRX r4, FPINST - tst r2, #FPEXC_FP2V - VFPFMRX r5, FPINST2, ne @ vmrsne - bic r6, r2, #FPEXC_EX @ FPEXC_EX disable - VFPFMXR FPEXC, r6 -1: - VFPFSTMIA \vfp_base, r6 @ Save VFP registers - stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2 -.endm - -/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */ -.macro restore_vfp_state vfp_base - VFPFLDMIA \vfp_base, r6 @ Load VFP registers - ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2 - - VFPFMXR FPSCR, r3 - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - VFPFMXR FPINST, r4 - tst r2, #FPEXC_FP2V - VFPFMXR FPINST2, r5, ne -1: - VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN) -.endm - -/* These are simply for the macros to work - value don't have meaning */ -.equ usr, 0 -.equ svc, 1 -.equ abt, 2 -.equ und, 3 -.equ irq, 4 -.equ fiq, 5 - -.macro push_host_regs_mode mode - mrs r2, SP_\mode - mrs r3, LR_\mode - mrs r4, SPSR_\mode - push {r2, r3, r4} -.endm - -/* - * Store all host persistent registers on the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro save_host_regs - /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */ - mrs r2, ELR_hyp - push {r2} - - /* usr regs */ - push {r4-r12} @ r0-r3 are always clobbered - mrs r2, SP_usr - mov r3, lr - push {r2, r3} - - push_host_regs_mode svc - push_host_regs_mode abt - push_host_regs_mode und - push_host_regs_mode irq - - /* fiq regs */ - mrs r2, r8_fiq - mrs r3, r9_fiq - mrs r4, r10_fiq - mrs r5, r11_fiq - mrs r6, r12_fiq - mrs r7, SP_fiq - mrs r8, LR_fiq - mrs r9, SPSR_fiq - push {r2-r9} -.endm - -.macro pop_host_regs_mode mode - pop {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all host registers from the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro restore_host_regs - pop {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - pop_host_regs_mode irq - pop_host_regs_mode und - pop_host_regs_mode abt - pop_host_regs_mode svc - - pop {r2, r3} - msr SP_usr, r2 - mov lr, r3 - pop {r4-r12} - - pop {r2} - msr ELR_hyp, r2 -.endm - -/* - * Restore SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r1, r2, r3, r4. - */ -.macro restore_guest_regs_mode mode, offset - add r1, vcpu, \offset - ldm r1, {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all guest registers from the vcpu struct. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers *all* registers. - */ -.macro restore_guest_regs - restore_guest_regs_mode svc, #VCPU_SVC_REGS - restore_guest_regs_mode abt, #VCPU_ABT_REGS - restore_guest_regs_mode und, #VCPU_UND_REGS - restore_guest_regs_mode irq, #VCPU_IRQ_REGS - - add r1, vcpu, #VCPU_FIQ_REGS - ldm r1, {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - @ Load return state - ldr r2, [vcpu, #VCPU_PC] - ldr r3, [vcpu, #VCPU_CPSR] - msr ELR_hyp, r2 - msr SPSR_cxsf, r3 - - @ Load user registers - ldr r2, [vcpu, #VCPU_USR_SP] - ldr r3, [vcpu, #VCPU_USR_LR] - msr SP_usr, r2 - mov lr, r3 - add vcpu, vcpu, #(VCPU_USR_REGS) - ldm vcpu, {r0-r12} -.endm - -/* - * Save SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs_mode mode, offset - add r2, vcpu, \offset - mrs r3, SP_\mode - mrs r4, LR_\mode - mrs r5, SPSR_\mode - stm r2, {r3, r4, r5} -.endm - -/* - * Save all guest registers to the vcpu struct - * Expects guest's r0, r1, r2 on the stack. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs - @ Store usr registers - add r2, vcpu, #VCPU_USR_REG(3) - stm r2, {r3-r12} - add r2, vcpu, #VCPU_USR_REG(0) - pop {r3, r4, r5} @ r0, r1, r2 - stm r2, {r3, r4, r5} - mrs r2, SP_usr - mov r3, lr - str r2, [vcpu, #VCPU_USR_SP] - str r3, [vcpu, #VCPU_USR_LR] - - @ Store return state - mrs r2, ELR_hyp - mrs r3, spsr - str r2, [vcpu, #VCPU_PC] - str r3, [vcpu, #VCPU_CPSR] - - @ Store other guest registers - save_guest_regs_mode svc, #VCPU_SVC_REGS - save_guest_regs_mode abt, #VCPU_ABT_REGS - save_guest_regs_mode und, #VCPU_UND_REGS - save_guest_regs_mode irq, #VCPU_IRQ_REGS -.endm - -/* Reads cp15 registers from hardware and stores them in memory - * @store_to_vcpu: If 0, registers are written in-order to the stack, - * otherwise to the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2 - r12 - */ -.macro read_cp15_state store_to_vcpu - mrc p15, 0, r2, c1, c0, 0 @ SCTLR - mrc p15, 0, r3, c1, c0, 2 @ CPACR - mrc p15, 0, r4, c2, c0, 2 @ TTBCR - mrc p15, 0, r5, c3, c0, 0 @ DACR - mrrc p15, 0, r6, r7, c2 @ TTBR 0 - mrrc p15, 1, r8, r9, c2 @ TTBR 1 - mrc p15, 0, r10, c10, c2, 0 @ PRRR - mrc p15, 0, r11, c10, c2, 1 @ NMRR - mrc p15, 2, r12, c0, c0, 0 @ CSSELR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - str r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - str r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r2, vcpu, #CP15_OFFSET(c2_TTBR0) - strd r6, r7, [r2] - add r2, vcpu, #CP15_OFFSET(c2_TTBR1) - strd r8, r9, [r2] - str r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - str r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mrc p15, 0, r2, c13, c0, 1 @ CID - mrc p15, 0, r3, c13, c0, 2 @ TID_URW - mrc p15, 0, r4, c13, c0, 3 @ TID_URO - mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV - mrc p15, 0, r6, c5, c0, 0 @ DFSR - mrc p15, 0, r7, c5, c0, 1 @ IFSR - mrc p15, 0, r8, c5, c1, 0 @ ADFSR - mrc p15, 0, r9, c5, c1, 1 @ AIFSR - mrc p15, 0, r10, c6, c0, 0 @ DFAR - mrc p15, 0, r11, c6, c0, 2 @ IFAR - mrc p15, 0, r12, c12, c0, 0 @ VBAR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c13_CID)] - str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - str r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - str r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - str r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - str r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - str r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL - mrrc p15, 0, r4, r5, c7 @ PAR - mrc p15, 0, r6, c10, c3, 0 @ AMAIR0 - mrc p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \store_to_vcpu == 0 - push {r2,r4-r7} - .else - str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - strd r4, r5, [r12] - str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif -.endm - -/* - * Reads cp15 registers from memory and writes them to hardware - * @read_from_vcpu: If 0, registers are read in-order from the stack, - * otherwise from the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - */ -.macro write_cp15_state read_from_vcpu - .if \read_from_vcpu == 0 - pop {r2,r4-r7} - .else - ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - ldrd r4, r5, [r12] - ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif - - mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL - mcrr p15, 0, r4, r5, c7 @ PAR - mcr p15, 0, r6, c10, c3, 0 @ AMAIR0 - mcr p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c13_CID)] - ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mcr p15, 0, r2, c13, c0, 1 @ CID - mcr p15, 0, r3, c13, c0, 2 @ TID_URW - mcr p15, 0, r4, c13, c0, 3 @ TID_URO - mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV - mcr p15, 0, r6, c5, c0, 0 @ DFSR - mcr p15, 0, r7, c5, c0, 1 @ IFSR - mcr p15, 0, r8, c5, c1, 0 @ ADFSR - mcr p15, 0, r9, c5, c1, 1 @ AIFSR - mcr p15, 0, r10, c6, c0, 0 @ DFAR - mcr p15, 0, r11, c6, c0, 2 @ IFAR - mcr p15, 0, r12, c12, c0, 0 @ VBAR - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r12, vcpu, #CP15_OFFSET(c2_TTBR0) - ldrd r6, r7, [r12] - add r12, vcpu, #CP15_OFFSET(c2_TTBR1) - ldrd r8, r9, [r12] - ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mcr p15, 0, r2, c1, c0, 0 @ SCTLR - mcr p15, 0, r3, c1, c0, 2 @ CPACR - mcr p15, 0, r4, c2, c0, 2 @ TTBCR - mcr p15, 0, r5, c3, c0, 0 @ DACR - mcrr p15, 0, r6, r7, c2 @ TTBR 0 - mcrr p15, 1, r8, r9, c2 @ TTBR 1 - mcr p15, 0, r10, c10, c2, 0 @ PRRR - mcr p15, 0, r11, c10, c2, 1 @ NMRR - mcr p15, 2, r12, c0, c0, 0 @ CSSELR -.endm - -/* - * Save the VGIC CPU state into memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro save_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* Save all interesting registers */ - ldr r4, [r2, #GICH_VMCR] - ldr r5, [r2, #GICH_MISR] - ldr r6, [r2, #GICH_EISR0] - ldr r7, [r2, #GICH_EISR1] - ldr r8, [r2, #GICH_ELRSR0] - ldr r9, [r2, #GICH_ELRSR1] - ldr r10, [r2, #GICH_APR] -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r5, r5 ) -ARM_BE8(rev r6, r6 ) -ARM_BE8(rev r7, r7 ) -ARM_BE8(rev r8, r8 ) -ARM_BE8(rev r9, r9 ) -ARM_BE8(rev r10, r10 ) - - str r4, [r11, #VGIC_V2_CPU_VMCR] - str r5, [r11, #VGIC_V2_CPU_MISR] -#ifdef CONFIG_CPU_ENDIAN_BE8 - str r6, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r7, [r11, #VGIC_V2_CPU_EISR] - str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)] - str r9, [r11, #VGIC_V2_CPU_ELRSR] -#else - str r6, [r11, #VGIC_V2_CPU_EISR] - str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r8, [r11, #VGIC_V2_CPU_ELRSR] - str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] -#endif - str r10, [r11, #VGIC_V2_CPU_APR] - - /* Clear GICH_HCR */ - mov r5, #0 - str r5, [r2, #GICH_HCR] - - /* Save list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r2], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r3], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -/* - * Restore the VGIC CPU state from memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro restore_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_V2_CPU_HCR] - ldr r4, [r11, #VGIC_V2_CPU_VMCR] - ldr r8, [r11, #VGIC_V2_CPU_APR] -ARM_BE8(rev r3, r3 ) -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r8, r8 ) - - str r3, [r2, #GICH_HCR] - str r4, [r2, #GICH_VMCR] - str r8, [r2, #GICH_APR] - - /* Restore list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r3], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r2], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -#define CNTHCTL_PL1PCTEN (1 << 0) -#define CNTHCTL_PL1PCEN (1 << 1) - -/* - * Save the timer state onto the VCPU and allow physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro save_timer_state - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL - str r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - - isb - - mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - strd r2, r3, [r5] - - @ Ensure host CNTVCT == CNTPCT - mov r2, #0 - mcrr p15, 4, r2, r2, c14 @ CNTVOFF - -1: - mov r2, #0 @ Clear ENABLE - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL - - @ Allow physical timer/counter access for the host - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL -.endm - -/* - * Load the timer state from the VCPU and deny physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro restore_timer_state - @ Disallow physical timer access for the guest - @ Physical counter access is allowed - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #CNTHCTL_PL1PCTEN - bic r2, r2, #CNTHCTL_PL1PCEN - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL - - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - ldr r2, [r4, #KVM_TIMER_CNTVOFF] - ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF - - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - ldrd r2, r3, [r5] - mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - isb - - ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - and r2, r2, #3 - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL -1: -.endm - -.equ vmentry, 0 -.equ vmexit, 1 - -/* Configures the HSTR (Hyp System Trap Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hstr operation - mrc p15, 4, r2, c1, c1, 3 - ldr r3, =HSTR_T(15) - .if \operation == vmentry - orr r2, r2, r3 @ Trap CR{15} - .else - bic r2, r2, r3 @ Don't trap any CRx accesses - .endif - mcr p15, 4, r2, c1, c1, 3 -.endm - -/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return - * (hardware reset value is 0). Keep previous value in r2. - * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if - * VFP wasn't already enabled (always executed on vmtrap). - * If a label is specified with vmexit, it is branched to if VFP wasn't - * enabled. - */ -.macro set_hcptr operation, mask, label = none - mrc p15, 4, r2, c1, c1, 2 - ldr r3, =\mask - .if \operation == vmentry - orr r3, r2, r3 @ Trap coproc-accesses defined in mask - .else - bic r3, r2, r3 @ Don't trap defined coproc-accesses - .endif - mcr p15, 4, r3, c1, c1, 2 - .if \operation != vmentry - .if \operation == vmexit - tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11)) - beq 1f - .endif - isb - .if \label != none - b \label - .endif -1: - .endif -.endm - -/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hdcr operation - mrc p15, 4, r2, c1, c1, 1 - ldr r3, =(HDCR_TPM|HDCR_TPMCR) - .if \operation == vmentry - orr r2, r2, r3 @ Trap some perfmon accesses - .else - bic r2, r2, r3 @ Don't trap any perfmon accesses - .endif - mcr p15, 4, r2, c1, c1, 1 -.endm - -/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */ -.macro configure_hyp_role operation - .if \operation == vmentry - ldr r2, [vcpu, #VCPU_HCR] - ldr r3, [vcpu, #VCPU_IRQ_LINES] - orr r2, r2, r3 - .else - mov r2, #0 - .endif - mcr p15, 4, r2, c1, c1, 0 @ HCR -.endm - -.macro load_vcpu - mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR -.endm diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 7f33b2056ae6..0f6600f05137 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, run->mmio.is_write = is_write; run->mmio.phys_addr = fault_ipa; run->mmio.len = len; - memcpy(run->mmio.data, data_buf, len); + if (is_write) + memcpy(run->mmio.data, data_buf, len); if (!ret) { /* We handled the access successfully in the kernel. */ diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index aba61fd3697a..58dbd5c439df 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -28,6 +28,7 @@ #include <asm/kvm_mmio.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> +#include <asm/virt.h> #include "trace.h" @@ -598,6 +599,9 @@ int create_hyp_mappings(void *from, void *to) unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); + if (is_kernel_in_hyp_mode()) + return 0; + start = start & PAGE_MASK; end = PAGE_ALIGN(end); @@ -630,6 +634,9 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); + if (is_kernel_in_hyp_mode()) + return 0; + /* Check for a valid kernel IO mapping */ if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1)) return -EINVAL; @@ -1431,6 +1438,22 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) } /* + * Check for a cache maintenance operation. Since we + * ended-up here, we know it is outside of any memory + * slot. But we can't find out if that is for a device, + * or if the guest is just being stupid. The only thing + * we know for sure is that this range cannot be cached. + * + * So let's assume that the guest is just being + * cautious, and skip the instruction. + */ + if (kvm_vcpu_dabt_is_cm(vcpu)) { + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + ret = 1; + goto out_unlock; + } + + /* * The IPA is reported as [MAX:12], so we need to * complement it with the bottom 12 bits from the * faulting VA. This is always 12 bits, irrespective diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index a9b3b905e661..c2b131527a64 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -70,7 +70,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { struct kvm *kvm = source_vcpu->kvm; struct kvm_vcpu *vcpu = NULL; - wait_queue_head_t *wq; + struct swait_queue_head *wq; unsigned long cpu_id; unsigned long context_id; phys_addr_t target_pc; @@ -119,7 +119,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); - wake_up_interruptible(wq); + swake_up(wq); return PSCI_RET_SUCCESS; } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index eeb85858d6bb..0048b5a62a50 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -71,7 +71,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset core registers */ - memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs)); + memcpy(&vcpu->arch.ctxt.gp_regs, reset_regs, sizeof(vcpu->arch.ctxt.gp_regs)); /* Reset CP15 registers */ kvm_reset_coprocs(vcpu); diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index 5c2d54f59f53..b41838a58ae4 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -1,6 +1,7 @@ config ARCH_ALPINE bool "Annapurna Labs Alpine platform" depends on ARCH_MULTI_V7 + select ALPINE_MSI select ARM_AMBA select ARM_GIC select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig new file mode 100644 index 000000000000..6cbe5a2eabab --- /dev/null +++ b/arch/arm/mach-artpec/Kconfig @@ -0,0 +1,20 @@ +menuconfig ARCH_ARTPEC + bool "Axis Communications ARM based ARTPEC SoCs" + depends on ARCH_MULTI_V7 + +if ARCH_ARTPEC + +config MACH_ARTPEC6 + bool "Axis ARTPEC-6 ARM Cortex A9 Platform" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + help + Support for Axis ARTPEC-6 ARM Cortex A9 Platform + +endif diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile new file mode 100644 index 000000000000..78325f0c859c --- /dev/null +++ b/arch/arm/mach-artpec/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c new file mode 100644 index 000000000000..71513df3374e --- /dev/null +++ b/arch/arm/mach-artpec/board-artpec6.c @@ -0,0 +1,72 @@ +/* + * ARTPEC-6 device support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/amba/bus.h> +#include <linux/clocksource.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/mfd/syscon.h> +#include <linux/of_platform.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/smp.h> +#include <asm/smp_scu.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/psci.h> +#include <linux/arm-smccc.h> + + +#define ARTPEC6_DMACFG_REGNUM 0x10 +#define ARTPEC6_DMACFG_UARTS_BURST 0xff + +#define SECURE_OP_L2C_WRITEREG 0xb4000001 + +static void __init artpec6_init_machine(void) +{ + struct regmap *regmap; + + regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon"); + + if (!IS_ERR(regmap)) { + /* Use PL011 DMA Burst Request signal instead of DMA + * Single Request + */ + regmap_write(regmap, ARTPEC6_DMACFG_REGNUM, + ARTPEC6_DMACFG_UARTS_BURST); + }; + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg) +{ + struct arm_smccc_res res; + + arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0, + 0, 0, 0, 0, &res); + + WARN_ON(res.a0); +} + +static const char * const artpec6_dt_match[] = { + "axis,artpec6", + NULL +}; + +DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform") + .l2c_aux_val = 0x0C000000, + .l2c_aux_mask = 0xF3FFFFFF, + .l2c_write_sec = artpec6_l2c310_write_sec, + .init_machine = artpec6_init_machine, + .dt_compat = artpec6_dt_match, +MACHINE_END diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 23be2e433097..08047afdf38e 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -104,6 +104,7 @@ config HAVE_AT91_USB_CLK config COMMON_CLK_AT91 bool select COMMON_CLK + select MFD_SYSCON config HAVE_AT91_SMD bool diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index c1a7c6cc00e1..63b4fa25b48a 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -12,7 +12,6 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/system_misc.h> #include "generic.h" #include "soc.h" @@ -33,7 +32,6 @@ static void __init at91rm9200_dt_device_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); - arm_pm_idle = at91rm9200_idle; at91rm9200_pm_init(); } diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 7eb64f763034..cada2a6412b3 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -62,8 +62,6 @@ static void __init at91sam9_common_init(void) soc_dev = soc_device_to_device(soc); of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); - - arm_pm_idle = at91sam9_idle; } static void __init at91sam9_dt_device_init(void) diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b0fa7dc7286d..28ca57a2060f 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,27 +11,18 @@ #ifndef _AT91_GENERIC_H #define _AT91_GENERIC_H -#include <linux/of.h> -#include <linux/reboot.h> - - /* Map io */ -extern void __init at91_map_io(void); -extern void __init at91_alt_map_io(void); - -/* idle */ -extern void at91rm9200_idle(void); -extern void at91sam9_idle(void); - #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9260_pm_init(void); extern void __init at91sam9g45_pm_init(void); extern void __init at91sam9x5_pm_init(void); +extern void __init sama5_pm_init(void); #else static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91sam9260_pm_init(void) { } static inline void __init at91sam9g45_pm_init(void) { } static inline void __init at91sam9x5_pm_init(void) { } +static inline void __init sama5_pm_init(void) { } #endif #endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 23726fb31741..f06270198bf1 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -31,10 +31,13 @@ #include <asm/mach/irq.h> #include <asm/fncpy.h> #include <asm/cacheflush.h> +#include <asm/system_misc.h> #include "generic.h" #include "pm.h" +static void __iomem *pmc; + /* * FIXME: this is needed to communicate between the pinctrl driver and * the PM implementation in the machine. Possibly part of the PM @@ -87,7 +90,7 @@ static int at91_pm_verify_clocks(void) unsigned long scsr; int i; - scsr = at91_pmc_read(AT91_PMC_SCSR); + scsr = readl(pmc + AT91_PMC_SCSR); /* USB must not be using PLLB */ if ((scsr & at91_pm_data.uhp_udp_mask) != 0) { @@ -101,8 +104,7 @@ static int at91_pm_verify_clocks(void) if ((scsr & (AT91_PMC_PCK0 << i)) == 0) continue; - - css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; + css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS; if (css != AT91_PMC_CSS_SLOW) { pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); return 0; @@ -145,8 +147,8 @@ static void at91_pm_suspend(suspend_state_t state) flush_cache_all(); outer_disable(); - at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], pm_data); + at91_suspend_sram_fn(pmc, at91_ramc_base[0], + at91_ramc_base[1], pm_data); outer_resume(); } @@ -353,6 +355,21 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } +void at91rm9200_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR); +} + +void at91sam9_idle(void) +{ + writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR); + cpu_do_idle(); +} + static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; @@ -399,13 +416,36 @@ static void __init at91_pm_sram_init(void) &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } -static void __init at91_pm_init(void) +static const struct of_device_id atmel_pmc_ids[] __initconst = { + { .compatible = "atmel,at91rm9200-pmc" }, + { .compatible = "atmel,at91sam9260-pmc" }, + { .compatible = "atmel,at91sam9g45-pmc" }, + { .compatible = "atmel,at91sam9n12-pmc" }, + { .compatible = "atmel,at91sam9x5-pmc" }, + { .compatible = "atmel,sama5d3-pmc" }, + { .compatible = "atmel,sama5d2-pmc" }, + { /* sentinel */ }, +}; + +static void __init at91_pm_init(void (*pm_idle)(void)) { - at91_pm_sram_init(); + struct device_node *pmc_np; if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); + pmc_np = of_find_matching_node(NULL, atmel_pmc_ids); + pmc = of_iomap(pmc_np, 0); + if (!pmc) { + pr_err("AT91: PM not supported, PMC not found\n"); + return; + } + + if (pm_idle) + arm_pm_idle = pm_idle; + + at91_pm_sram_init(); + if (at91_suspend_sram_fn) suspend_set_ops(&at91_pm_ops); else @@ -424,7 +464,7 @@ void __init at91rm9200_pm_init(void) at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP; at91_pm_data.memctrl = AT91_MEMCTRL_MC; - at91_pm_init(); + at91_pm_init(at91rm9200_idle); } void __init at91sam9260_pm_init(void) @@ -432,7 +472,7 @@ void __init at91sam9260_pm_init(void) at91_dt_ramc(); at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC; at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; - return at91_pm_init(); + at91_pm_init(at91sam9_idle); } void __init at91sam9g45_pm_init(void) @@ -440,7 +480,7 @@ void __init at91sam9g45_pm_init(void) at91_dt_ramc(); at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP; at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; - return at91_pm_init(); + at91_pm_init(at91sam9_idle); } void __init at91sam9x5_pm_init(void) @@ -448,5 +488,13 @@ void __init at91sam9x5_pm_init(void) at91_dt_ramc(); at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; - return at91_pm_init(); + at91_pm_init(at91sam9_idle); +} + +void __init sama5_pm_init(void) +{ + at91_dt_ramc(); + at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; + at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; + at91_pm_init(NULL); } diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index d9cf6799aec0..df8fdf1cf66d 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -51,7 +51,7 @@ static void __init sama5_dt_device_init(void) soc_dev = soc_device_to_device(soc); of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); - at91sam9x5_pm_init(); + sama5_pm_init(); } static const char *const sama5_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c index de061ec5a479..41dcf5d65630 100644 --- a/arch/arm/mach-bcm/bcm63xx_pmb.c +++ b/arch/arm/mach-bcm/bcm63xx_pmb.c @@ -92,7 +92,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn, unsigned int *cpu, unsigned int *addr) { - struct device_node *pmb_dn; struct of_phandle_args args; int ret; @@ -109,7 +108,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn, return ret; } - pmb_dn = args.np; if (args.args_count != 2) { pr_err("reset-controller does not conform to reset-cells\n"); return -EINVAL; diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 575defcc53f9..cfae9c71fb74 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -283,7 +283,7 @@ static const struct smp_operations bcm_smp_ops __initconst = { CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", &bcm_smp_ops); -struct smp_operations nsp_smp_ops __initdata = { +static const struct smp_operations nsp_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = nsp_boot_secondary, }; diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot deleted file mode 100644 index d079de0b6e3b..000000000000 --- a/arch/arm/mach-cns3xxx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h index a0f5b60662ae..a642ba5feb64 100644 --- a/arch/arm/mach-cns3xxx/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/cns3xxx.h @@ -162,13 +162,11 @@ #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ -#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 #define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */ #define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000 #define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */ -#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000 #define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */ #define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000 @@ -177,16 +175,13 @@ #define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000 #define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */ -#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000 #define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */ -#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000 #define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */ #define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000 #define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */ -#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000 #define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */ #define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000 @@ -195,7 +190,6 @@ #define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000 #define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */ -#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000 /* * Testchip peripheral and fpga gic regions diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 47905a50e075..318394ed5c7a 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -220,13 +220,13 @@ static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci, u32 mask = (0x1ull << (size * 8)) - 1; int shift = (where % 4) * 8; - v = readl_relaxed(base + (where & 0xffc)); + v = readl_relaxed(base); v &= ~(mask << shift); v |= (val & mask) << shift; - writel_relaxed(v, base + (where & 0xffc)); - readl_relaxed(base + (where & 0xffc)); + writel_relaxed(v, base); + readl_relaxed(base); } static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bcaf1d025505..36c8f5324e43 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -9,7 +9,6 @@ config CP_INTC config ARCH_DAVINCI_DMx bool - select CPU_ARM926T menu "TI DaVinci Implementations" @@ -32,7 +31,7 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE @@ -40,13 +39,12 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX select CP_INTC config ARCH_DAVINCI_DA8XX bool - select CPU_ARM926T config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" @@ -58,7 +56,7 @@ comment "DaVinci Board Type" config MACH_DA8XX_DT bool "Support DA8XX platforms using device tree" default y - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA850 select PINCTRL help Say y here to include support for TI DaVinci DA850 based using @@ -68,8 +66,6 @@ config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -77,8 +73,6 @@ config MACH_DAVINCI_EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -109,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x - select EEPROM_AT24 - select I2C select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used @@ -123,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 - select EEPROM_AT24 - select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -133,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 - select EEPROM_AT24 - select GPIO_PCF857X - select I2C + select GPIO_PCF857X if I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -204,8 +192,6 @@ endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 - select EEPROM_AT24 - select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 7a20507a3eef..68cc09907828 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -267,7 +267,7 @@ static struct platform_device rtc_dev = { static struct snd_platform_data dm644x_evm_snd_data; /*----------------------------------------------------------------------*/ - +#ifdef CONFIG_I2C /* * I2C GPIO expanders */ @@ -612,6 +612,7 @@ static void __init evm_init_i2c(void) i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } +#endif #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) @@ -780,7 +781,9 @@ static __init void davinci_evm_init(void) pr_warn("%s: Cannot configure AEMIF\n", __func__); +#ifdef CONFIG_I2C evm_leds[7].default_trigger = "nand-disk"; +#endif if (HAS_NOR) pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n"); } else if (HAS_NOR) @@ -789,9 +792,10 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); +#ifdef CONFIG_I2C evm_init_i2c(); - davinci_setup_mmc(0, &dm6446evm_mmc_config); +#endif dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); davinci_serial_init(dm644x_serial_device); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index ee6ab7e8d3b0..f702d4fc8eb8 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = { #define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) +#ifdef CONFIG_I2C /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) #define DM646X_EVM_ATA_PWD BIT(1) @@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = { .setup = davinci_get_mac_addr, .context = (void *)0x7f00, }; +#endif static u8 dm646x_iis_serializer_direction[] = { TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { }, }; +#ifdef CONFIG_I2C static struct i2c_client *cpld_client; static int cpld_video_probe(struct i2c_client *client, @@ -710,6 +713,7 @@ static void __init evm_init_i2c(void) evm_init_cpld(); evm_init_video(); } +#endif #define DM6467T_EVM_REF_FREQ 33000000 @@ -764,7 +768,10 @@ static __init void evm_init(void) if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); +#ifdef CONFIG_I2C evm_init_i2c(); +#endif + davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index de1316bf643a..d97c588550ad 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -51,6 +51,7 @@ struct factory_config { static struct factory_config factory_config; +#ifdef CONFIG_CPU_FREQ struct part_no_info { const char *part_no; /* part number string of interest */ int max_freq; /* khz */ @@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = { }, }; -#ifdef CONFIG_CPU_FREQ static void mityomapl138_cpufreq_init(const char *partnum) { int i, ret; @@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct memory_accessor *a, void *context) +static void read_factory_config(struct nvmem_device *nvmem, void *context) { int ret; const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; - ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), + &factory_config); if (ret != sizeof(struct factory_config)) { pr_warn("Read Factory Config Failed: %d\n", ret); goto bad_config; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index a794f6d9d444..f55ef2ef2f92 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; int davinci_intc_type; -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) { char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; /* Read MAC addr from EEPROM */ - if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index e88b7a5cde99..725e693639d2 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -17,6 +17,7 @@ #include <linux/ahci_platform.h> #include <linux/clk.h> #include <linux/reboot.h> +#include <linux/dmaengine.h> #include <mach/cputype.h> #include <mach/common.h> @@ -233,16 +234,54 @@ static const struct platform_device_info da850_edma1_device __initconst = { .size_data = sizeof(da850_edma1_pdata), }; +static const struct dma_slave_map da830_edma_map[] = { + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, + { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, + { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, + { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, + { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, +}; + int __init da830_register_edma(struct edma_rsv_info *rsv) { struct platform_device *edma_pdev; da8xx_edma0_pdata.rsv = rsv; + da8xx_edma0_pdata.slave_map = da830_edma_map; + da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } +static const struct dma_slave_map da850_edma0_map[] = { + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) }, + { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, + { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, + { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, +}; + +static const struct dma_slave_map da850_edma1_map[] = { + { "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) }, + { "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) }, +}; + int __init da850_register_edma(struct edma_rsv_info *rsv[2]) { struct platform_device *edma_pdev; @@ -252,11 +291,18 @@ int __init da850_register_edma(struct edma_rsv_info *rsv[2]) da850_edma1_pdata.rsv = rsv[1]; } + da8xx_edma0_pdata.slave_map = da850_edma0_map; + da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); if (IS_ERR(edma_pdev)) { pr_warn("%s: Failed to register eDMA0\n", __func__); return PTR_ERR(edma_pdev); } + + da850_edma1_pdata.slave_map = da850_edma1_map; + da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map); + edma_pdev = platform_device_register_full(&da850_edma1_device); return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index c7c1458df23c..a0ecf499c2f2 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -576,9 +577,28 @@ static s8 queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm355_edma_map[] = { + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) }, + { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) }, + { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, + { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, + { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, + { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, +}; + static struct edma_soc_info dm355_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm355_edma_map, + .slavecnt = ARRAY_SIZE(dm355_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 01843fbcc9ea..384d3674dd9b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -17,6 +17,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -862,9 +863,30 @@ static s8 dm365_queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm365_edma_map[] = { + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, + { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, + { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, + { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, +}; + static struct edma_soc_info dm365_edma_pdata = { .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, + .slave_map = dm365_edma_map, + .slavecnt = ARRAY_SIZE(dm365_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index b28071ae3a57..b4b3a8b9ca20 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> +#include <linux/dmaengine.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -505,9 +506,20 @@ static s8 queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm644x_edma_map[] = { + { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, +}; + static struct edma_soc_info dm644x_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm644x_edma_map, + .slavecnt = ARRAY_SIZE(dm644x_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index cf80786e2471..a43db0f5fbaa 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -9,6 +9,7 @@ * or implied. */ #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -540,9 +541,19 @@ static s8 dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm646x_edma_map[] = { + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) }, + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) }, + { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) }, + { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, +}; + static struct edma_soc_info dm646x_edma_pdata = { .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm646x_edma_map, + .slavecnt = ARRAY_SIZE(dm646x_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8fb97b93b6bb..53b456a5bbe0 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -30,7 +30,7 @@ u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ -static void putc(char c) +static inline void putc(char c) { if (!uart) return; diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index d8c439c89ea9..0bd6d894c597 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -8,7 +8,7 @@ config DOVE_LEGACY config MACH_DOVE_DB bool "Marvell DB-MV88AP510 Development Board" select DOVE_LEGACY - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell DB-MV88AP510 Development Board. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 652a0bb11578..207fa2c737a6 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -5,7 +5,7 @@ # # Licensed under GPLv2 -# Configuration options for the EXYNOS4 +# Configuration options for the EXYNOS menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" @@ -17,6 +17,7 @@ menuconfig ARCH_EXYNOS select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL + select EXYNOS_PMU select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -25,8 +26,10 @@ menuconfig ARCH_EXYNOS select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC + select SOC_SAMSUNG select SRAM select THERMAL + select THERMAL_OF select MFD_SYSCON select CLKSRC_EXYNOS_MCT select POWER_RESET diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 2f306767cdfe..34d29df3e006 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree) # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o obj-$(CONFIG_PM_SLEEP) += suspend.o diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot deleted file mode 100644 index b9862e22bf10..000000000000 --- a/arch/arm/mach-exynos/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x40008000 -params_phys-y := 0x40000100 diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index e349a038976d..5365bf1f586a 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,6 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -#include <linux/of.h> #include <linux/platform_data/cpuidle-exynos.h> #define EXYNOS3250_SOC_ID 0xE3472000 diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/arch/arm/mach-exynos/exynos-pmu.h deleted file mode 100644 index a2ab0d52b230..000000000000 --- a/arch/arm/mach-exynos/exynos-pmu.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header for EXYNOS PMU Driver support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __EXYNOS_PMU_H -#define __EXYNOS_PMU_H - -enum sys_powerdown { - SYS_AFTR, - SYS_LPA, - SYS_SLEEP, - NUM_SYS_POWERDOWN, -}; - -extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); - -#endif /* __EXYNOS_PMU_H */ diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 1c47aee31e9c..bbf51a46f772 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -11,29 +11,23 @@ #include <linux/init.h> #include <linux/io.h> -#include <linux/kernel.h> -#include <linux/serial_s3c.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_domain.h> #include <linux/irqchip.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/memory.h> #include <mach/map.h> #include "common.h" #include "mfc.h" -#include "regs-pmu.h" - -void __iomem *pmu_base_addr; static struct map_desc exynos4_iodesc[] __initdata = { { @@ -70,11 +64,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), - .length = 144 * SZ_1K, - .type = MT_DEVICE, }, }; @@ -230,6 +219,10 @@ static const struct of_device_id exynos_cpufreq_matches[] = { { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, +#ifndef CONFIG_BL_SWITCHER + { .compatible = "samsung,exynos5420", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos5800", .data = "cpufreq-dt" }, +#endif { /* sentinel */ } }; diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 111cfbf66fdb..1bfd1b0bd9dc 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -20,8 +20,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/suspend.h> -#include <mach/map.h> - #include "common.h" #include "smc.h" diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index de3ae59e1cfb..c88325d56743 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -2,7 +2,7 @@ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * EXYNOS4 - Memory map definitions + * EXYNOS - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,30 +14,18 @@ #include <plat/map-base.h> -/* - * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x10000) - #include <plat/map-s5p.h> #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_CMU 0x10030000 -#define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_DMC0 0x10400000 #define EXYNOS4_PA_DMC1 0x10410000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS5_PA_SROMC 0x12250000 -/* Compatibility UART */ - -#define EXYNOS5440_PA_UART0 0x000B0000 - #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 56978199c479..f086bf615b29 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -16,13 +16,13 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/syscore_ops.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cputype.h> #include <asm/cp15.h> #include <asm/mcpm.h> #include <asm/smp_plat.h> -#include "regs-pmu.h" #include "common.h" #define EXYNOS5420_CPUS_PER_CLUSTER 4 diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 5bd9559786ba..85c3be63d644 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -15,11 +15,11 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/delay.h> -#include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> #include <linux/of_address.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/cp15.h> @@ -30,7 +30,6 @@ #include <mach/map.h> #include "common.h" -#include "regs-pmu.h" extern void exynos4_secondary_startup(void); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 9c1506b499bc..c43b776a51a3 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -17,7 +17,9 @@ #include <linux/suspend.h> #include <linux/cpu_pm.h> #include <linux/io.h> -#include <linux/err.h> +#include <linux/of.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> +#include <linux/soc/samsung/exynos-pmu.h> #include <asm/firmware.h> #include <asm/smp_scu.h> @@ -26,11 +28,7 @@ #include <mach/map.h> -#include <plat/pm-common.h> - #include "common.h" -#include "exynos-pmu.h" -#include "regs-pmu.h" static inline void __iomem *exynos_boot_vector_addr(void) { diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c deleted file mode 100644 index dbf9fe98d479..000000000000 --- a/arch/arm/mach-exynos/pmu.c +++ /dev/null @@ -1,967 +0,0 @@ -/* - * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS - CPU PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/cputype.h> - -#include "exynos-pmu.h" -#include "regs-pmu.h" - -#define PMU_TABLE_END (-1U) - -struct exynos_pmu_conf { - unsigned int offset; - u8 val[NUM_SYS_POWERDOWN]; -}; - -struct exynos_pmu_data { - const struct exynos_pmu_conf *pmu_config; - const struct exynos_pmu_conf *pmu_config_extra; - - void (*pmu_init)(void); - void (*powerdown_conf)(enum sys_powerdown); - void (*powerdown_conf_extra)(enum sys_powerdown); -}; - -struct exynos_pmu_context { - struct device *dev; - const struct exynos_pmu_data *pmu_data; -}; - -static void __iomem *pmu_base_addr; -static struct exynos_pmu_context *pmu_context; - -static inline void pmu_raw_writel(u32 val, u32 offset) -{ - writel_relaxed(val, pmu_base_addr + offset); -} - -static inline u32 pmu_raw_readl(u32 offset) -{ - return readl_relaxed(pmu_base_addr + offset); -} - -static struct exynos_pmu_conf exynos3250_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */ - { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} }, - { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4210_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } }, - { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } }, - { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, - { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4x12_pmu_config[] = { - { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, - { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } }, - /* XXX_OPTION register should be set other field */ - { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } }, - { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, - { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4412_pmu_config[] = { - { S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos5250_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_FSYS_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } }, - { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_USBOTG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_G2D_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_USBDRD_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SDMMC_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_CSSYS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SECSS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_ROTATOR_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} }, - { EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { PMU_TABLE_END,}, -}; - -static struct exynos_pmu_conf exynos5420_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x0} }, - { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5420_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} }, - { EXYNOS5420_G2D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_MSC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_FSYS_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_FSYS2_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_PSGEN_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_PERIC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_WCORE_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { PMU_TABLE_END,}, -}; - -static unsigned int const exynos3250_list_feed[] = { - EXYNOS3_ARM_CORE_OPTION(0), - EXYNOS3_ARM_CORE_OPTION(1), - EXYNOS3_ARM_CORE_OPTION(2), - EXYNOS3_ARM_CORE_OPTION(3), - EXYNOS3_ARM_COMMON_OPTION, - EXYNOS3_TOP_PWR_OPTION, - EXYNOS3_CORE_TOP_PWR_OPTION, - S5P_CAM_OPTION, - S5P_MFC_OPTION, - S5P_G3D_OPTION, - S5P_LCD0_OPTION, - S5P_ISP_OPTION, -}; - -static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode) -{ - unsigned int i; - unsigned int tmp; - - /* Enable only SC_FEEDBACK */ - for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) { - tmp = pmu_raw_readl(exynos3250_list_feed[i]); - tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER); - tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK; - pmu_raw_writel(tmp, exynos3250_list_feed[i]); - } - - if (mode != SYS_SLEEP) - return; - - pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION); - pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION); - pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION); - pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION, - EXYNOS3_EXT_REGULATOR_COREBLK_DURATION); -} - -static unsigned int const exynos5_list_both_cnt_feed[] = { - EXYNOS5_ARM_CORE0_OPTION, - EXYNOS5_ARM_CORE1_OPTION, - EXYNOS5_ARM_COMMON_OPTION, - EXYNOS5_GSCL_OPTION, - EXYNOS5_ISP_OPTION, - EXYNOS5_MFC_OPTION, - EXYNOS5_G3D_OPTION, - EXYNOS5_DISP1_OPTION, - EXYNOS5_MAU_OPTION, - EXYNOS5_TOP_PWR_OPTION, - EXYNOS5_TOP_PWR_SYSMEM_OPTION, -}; - -static unsigned int const exynos5_list_disable_wfi_wfe[] = { - EXYNOS5_ARM_CORE1_OPTION, - EXYNOS5_FSYS_ARM_OPTION, - EXYNOS5_ISP_ARM_OPTION, -}; - -static unsigned int const exynos5420_list_disable_pmu_reg[] = { - EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, - EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, - EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, - EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, -}; - -static void exynos5420_powerdown_conf(enum sys_powerdown mode) -{ - u32 this_cluster; - - this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1); - - /* - * set the cluster id to IROM register to ensure that we wake - * up with the current cluster. - */ - pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2); -} - - -static void exynos5_powerdown_conf(enum sys_powerdown mode) -{ - unsigned int i; - unsigned int tmp; - - /* - * Enable both SC_FEEDBACK and SC_COUNTER - */ - for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) { - tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]); - tmp |= (EXYNOS5_USE_SC_FEEDBACK | - EXYNOS5_USE_SC_COUNTER); - pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]); - } - - /* - * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable - */ - tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION); - tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION); - - /* - * Disable WFI/WFE on XXX_OPTION - */ - for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) { - tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]); - tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE | - EXYNOS5_OPTION_USE_STANDBYWFI); - pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]); - } -} - -void exynos_sys_powerdown_conf(enum sys_powerdown mode) -{ - unsigned int i; - const struct exynos_pmu_data *pmu_data; - - if (!pmu_context) - return; - - pmu_data = pmu_context->pmu_data; - - if (pmu_data->powerdown_conf) - pmu_data->powerdown_conf(mode); - - if (pmu_data->pmu_config) { - for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++) - pmu_raw_writel(pmu_data->pmu_config[i].val[mode], - pmu_data->pmu_config[i].offset); - } - - if (pmu_data->powerdown_conf_extra) - pmu_data->powerdown_conf_extra(mode); - - if (pmu_data->pmu_config_extra) { - for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++) - pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode], - pmu_data->pmu_config_extra[i].offset); - } -} - -static void exynos3250_pmu_init(void) -{ - unsigned int value; - - /* - * To prevent from issuing new bus request form L2 memory system - * If core status is power down, should be set '1' to L2 power down - */ - value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION); - value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION); - - /* Enable USE_STANDBY_WFI for all CORE */ - pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); - - /* - * Set PSHOLD port for output high - */ - value = pmu_raw_readl(S5P_PS_HOLD_CONTROL); - value |= S5P_PS_HOLD_OUTPUT_HIGH; - pmu_raw_writel(value, S5P_PS_HOLD_CONTROL); - - /* - * Enable signal for PSHOLD port - */ - value = pmu_raw_readl(S5P_PS_HOLD_CONTROL); - value |= S5P_PS_HOLD_EN; - pmu_raw_writel(value, S5P_PS_HOLD_CONTROL); -} - -static void exynos5250_pmu_init(void) -{ - unsigned int value; - /* - * When SYS_WDTRESET is set, watchdog timer reset request - * is ignored by power management unit. - */ - value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE); - value &= ~EXYNOS5_SYS_WDTRESET; - pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE); - - value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST); - value &= ~EXYNOS5_SYS_WDTRESET; - pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); -} - -static void exynos5420_pmu_init(void) -{ - unsigned int value; - int i; - - /* - * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers - * for local power blocks to Low initially as per Table 8-4: - * "System-Level Power-Down Configuration Registers". - */ - for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++) - pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]); - - /* Enable USE_STANDBY_WFI for all CORE */ - pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); - - value = pmu_raw_readl(EXYNOS_L2_OPTION(0)); - value &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(value, EXYNOS_L2_OPTION(0)); - - value = pmu_raw_readl(EXYNOS_L2_OPTION(1)); - value &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(value, EXYNOS_L2_OPTION(1)); - - /* - * If L2_COMMON is turned off, clocks related to ATB async - * bridge are gated. Thus, when ISP power is gated, LPI - * may get stuck. - */ - value = pmu_raw_readl(EXYNOS5420_LPI_MASK); - value |= EXYNOS5420_ATB_ISP_ARM; - pmu_raw_writel(value, EXYNOS5420_LPI_MASK); - - value = pmu_raw_readl(EXYNOS5420_LPI_MASK1); - value |= EXYNOS5420_ATB_KFC; - pmu_raw_writel(value, EXYNOS5420_LPI_MASK1); - - /* Prevent issue of new bus request from L2 memory */ - value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION); - value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION); - - value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION); - value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION); - - /* This setting is to reduce suspend/resume time */ - pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3); - - /* Serialized CPU wakeup of Eagle */ - pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE); - - pmu_raw_writel(SPREAD_USE_STANDWFI, - EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI); - - pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER); - pr_info("EXYNOS5420 PMU initialized\n"); -} - -static const struct exynos_pmu_data exynos3250_pmu_data = { - .pmu_config = exynos3250_pmu_config, - .pmu_init = exynos3250_pmu_init, - .powerdown_conf_extra = exynos3250_powerdown_conf_extra, -}; - -static const struct exynos_pmu_data exynos4210_pmu_data = { - .pmu_config = exynos4210_pmu_config, -}; - -static const struct exynos_pmu_data exynos4212_pmu_data = { - .pmu_config = exynos4x12_pmu_config, -}; - -static const struct exynos_pmu_data exynos4412_pmu_data = { - .pmu_config = exynos4x12_pmu_config, - .pmu_config_extra = exynos4412_pmu_config, -}; - -static const struct exynos_pmu_data exynos5250_pmu_data = { - .pmu_config = exynos5250_pmu_config, - .pmu_init = exynos5250_pmu_init, - .powerdown_conf = exynos5_powerdown_conf, -}; - -static const struct exynos_pmu_data exynos5420_pmu_data = { - .pmu_config = exynos5420_pmu_config, - .pmu_init = exynos5420_pmu_init, - .powerdown_conf = exynos5420_powerdown_conf, -}; - -/* - * PMU platform driver and devicetree bindings. - */ -static const struct of_device_id exynos_pmu_of_device_ids[] = { - { - .compatible = "samsung,exynos3250-pmu", - .data = &exynos3250_pmu_data, - }, { - .compatible = "samsung,exynos4210-pmu", - .data = &exynos4210_pmu_data, - }, { - .compatible = "samsung,exynos4212-pmu", - .data = &exynos4212_pmu_data, - }, { - .compatible = "samsung,exynos4412-pmu", - .data = &exynos4412_pmu_data, - }, { - .compatible = "samsung,exynos5250-pmu", - .data = &exynos5250_pmu_data, - }, { - .compatible = "samsung,exynos5420-pmu", - .data = &exynos5420_pmu_data, - }, - { /*sentinel*/ }, -}; - -static int exynos_pmu_probe(struct platform_device *pdev) -{ - const struct of_device_id *match; - struct device *dev = &pdev->dev; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pmu_base_addr = devm_ioremap_resource(dev, res); - if (IS_ERR(pmu_base_addr)) - return PTR_ERR(pmu_base_addr); - - pmu_context = devm_kzalloc(&pdev->dev, - sizeof(struct exynos_pmu_context), - GFP_KERNEL); - if (!pmu_context) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - pmu_context->dev = dev; - - match = of_match_node(exynos_pmu_of_device_ids, dev->of_node); - - pmu_context->pmu_data = match->data; - - if (pmu_context->pmu_data->pmu_init) - pmu_context->pmu_data->pmu_init(); - - platform_set_drvdata(pdev, pmu_context); - - dev_dbg(dev, "Exynos PMU Driver probe done\n"); - return 0; -} - -static struct platform_driver exynos_pmu_driver = { - .driver = { - .name = "exynos-pmu", - .of_match_table = exynos_pmu_of_device_ids, - }, - .probe = exynos_pmu_probe, -}; - -static int __init exynos_pmu_init(void) -{ - return platform_driver_register(&exynos_pmu_driver); - -} -postcore_initcall(exynos_pmu_init); diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h deleted file mode 100644 index 5e4f4c23b06a..000000000000 --- a/arch/arm/mach-exynos/regs-pmu.h +++ /dev/null @@ -1,693 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - Power management unit definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_PMU_H -#define __ASM_ARCH_REGS_PMU_H __FILE__ - -#define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200 - -#define S5P_CENTRAL_LOWPWR_CFG (1 << 16) - -#define S5P_CENTRAL_SEQ_OPTION 0x0208 - -#define S5P_USE_STANDBY_WFI0 (1 << 16) -#define S5P_USE_STANDBY_WFI1 (1 << 17) -#define S5P_USE_STANDBY_WFI2 (1 << 19) -#define S5P_USE_STANDBY_WFI3 (1 << 20) -#define S5P_USE_STANDBY_WFE0 (1 << 24) -#define S5P_USE_STANDBY_WFE1 (1 << 25) -#define S5P_USE_STANDBY_WFE2 (1 << 27) -#define S5P_USE_STANDBY_WFE3 (1 << 28) - -#define S5P_USE_STANDBY_WFI_ALL \ - (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \ - S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \ - S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \ - S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3) - -#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12) - -#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n) -#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28) -#define EXYNOS_SWRESET 0x0400 -#define EXYNOS5440_SWRESET 0x00C4 - -#define S5P_WAKEUP_STAT 0x0600 -#define S5P_EINT_WAKEUP_MASK 0x0604 -#define S5P_WAKEUP_MASK 0x0608 -#define S5P_WAKEUP_MASK2 0x0614 - -#define S5P_INFORM0 0x0800 -#define S5P_INFORM1 0x0804 -#define S5P_INFORM5 0x0814 -#define S5P_INFORM6 0x0818 -#define S5P_INFORM7 0x081C -#define S5P_PMU_SPARE2 0x0908 -#define S5P_PMU_SPARE3 0x090C - -#define EXYNOS_IROM_DATA2 0x0988 -#define S5P_ARM_CORE0_LOWPWR 0x1000 -#define S5P_DIS_IRQ_CORE0 0x1004 -#define S5P_DIS_IRQ_CENTRAL0 0x1008 -#define S5P_ARM_CORE1_LOWPWR 0x1010 -#define S5P_DIS_IRQ_CORE1 0x1014 -#define S5P_DIS_IRQ_CENTRAL1 0x1018 -#define S5P_ARM_COMMON_LOWPWR 0x1080 -#define S5P_L2_0_LOWPWR 0x10C0 -#define S5P_L2_1_LOWPWR 0x10C4 -#define S5P_CMU_ACLKSTOP_LOWPWR 0x1100 -#define S5P_CMU_SCLKSTOP_LOWPWR 0x1104 -#define S5P_CMU_RESET_LOWPWR 0x110C -#define S5P_APLL_SYSCLK_LOWPWR 0x1120 -#define S5P_MPLL_SYSCLK_LOWPWR 0x1124 -#define S5P_VPLL_SYSCLK_LOWPWR 0x1128 -#define S5P_EPLL_SYSCLK_LOWPWR 0x112C -#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR 0x1138 -#define S5P_CMU_RESET_GPSALIVE_LOWPWR 0x113C -#define S5P_CMU_CLKSTOP_CAM_LOWPWR 0x1140 -#define S5P_CMU_CLKSTOP_TV_LOWPWR 0x1144 -#define S5P_CMU_CLKSTOP_MFC_LOWPWR 0x1148 -#define S5P_CMU_CLKSTOP_G3D_LOWPWR 0x114C -#define S5P_CMU_CLKSTOP_LCD0_LOWPWR 0x1150 -#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR 0x1158 -#define S5P_CMU_CLKSTOP_GPS_LOWPWR 0x115C -#define S5P_CMU_RESET_CAM_LOWPWR 0x1160 -#define S5P_CMU_RESET_TV_LOWPWR 0x1164 -#define S5P_CMU_RESET_MFC_LOWPWR 0x1168 -#define S5P_CMU_RESET_G3D_LOWPWR 0x116C -#define S5P_CMU_RESET_LCD0_LOWPWR 0x1170 -#define S5P_CMU_RESET_MAUDIO_LOWPWR 0x1178 -#define S5P_CMU_RESET_GPS_LOWPWR 0x117C -#define S5P_TOP_BUS_LOWPWR 0x1180 -#define S5P_TOP_RETENTION_LOWPWR 0x1184 -#define S5P_TOP_PWR_LOWPWR 0x1188 -#define S5P_LOGIC_RESET_LOWPWR 0x11A0 -#define S5P_ONENAND_MEM_LOWPWR 0x11C0 -#define S5P_G2D_ACP_MEM_LOWPWR 0x11C8 -#define S5P_USBOTG_MEM_LOWPWR 0x11CC -#define S5P_HSMMC_MEM_LOWPWR 0x11D0 -#define S5P_CSSYS_MEM_LOWPWR 0x11D4 -#define S5P_SECSS_MEM_LOWPWR 0x11D8 -#define S5P_PAD_RETENTION_DRAM_LOWPWR 0x1200 -#define S5P_PAD_RETENTION_MAUDIO_LOWPWR 0x1204 -#define S5P_PAD_RETENTION_GPIO_LOWPWR 0x1220 -#define S5P_PAD_RETENTION_UART_LOWPWR 0x1224 -#define S5P_PAD_RETENTION_MMCA_LOWPWR 0x1228 -#define S5P_PAD_RETENTION_MMCB_LOWPWR 0x122C -#define S5P_PAD_RETENTION_EBIA_LOWPWR 0x1230 -#define S5P_PAD_RETENTION_EBIB_LOWPWR 0x1234 -#define S5P_PAD_RETENTION_ISOLATION_LOWPWR 0x1240 -#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR 0x1260 -#define S5P_XUSBXTI_LOWPWR 0x1280 -#define S5P_XXTI_LOWPWR 0x1284 -#define S5P_EXT_REGULATOR_LOWPWR 0x12C0 -#define S5P_GPIO_MODE_LOWPWR 0x1300 -#define S5P_GPIO_MODE_MAUDIO_LOWPWR 0x1340 -#define S5P_CAM_LOWPWR 0x1380 -#define S5P_TV_LOWPWR 0x1384 -#define S5P_MFC_LOWPWR 0x1388 -#define S5P_G3D_LOWPWR 0x138C -#define S5P_LCD0_LOWPWR 0x1390 -#define S5P_MAUDIO_LOWPWR 0x1398 -#define S5P_GPS_LOWPWR 0x139C -#define S5P_GPS_ALIVE_LOWPWR 0x13A0 - -#define EXYNOS_ARM_CORE0_CONFIGURATION 0x2000 -#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ - (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) -#define EXYNOS_ARM_CORE_STATUS(_nr) \ - (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_ARM_CORE_OPTION(_nr) \ - (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500 -#define EXYNOS_COMMON_CONFIGURATION(_nr) \ - (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) -#define EXYNOS_COMMON_STATUS(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_COMMON_OPTION(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_CORE_LOCAL_PWR_EN 0x3 - -#define EXYNOS_ARM_COMMON_STATUS 0x2504 -#define EXYNOS_COMMON_OPTION(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_ARM_L2_CONFIGURATION 0x2600 -#define EXYNOS_L2_CONFIGURATION(_nr) \ - (EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80)) -#define EXYNOS_L2_STATUS(_nr) \ - (EXYNOS_L2_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_L2_OPTION(_nr) \ - (EXYNOS_L2_CONFIGURATION(_nr) + 0x8) -#define EXYNOS_L2_COMMON_PWR_EN 0x3 - -#define EXYNOS_ARM_CORE_X_STATUS_OFFSET 0x4 - -#define EXYNOS5_APLL_SYSCLK_CONFIGURATION 0x2A00 -#define EXYNOS5_APLL_SYSCLK_STATUS 0x2A04 - -#define EXYNOS5_ARM_L2_OPTION 0x2608 -#define EXYNOS5_USE_RETENTION BIT(4) - -#define EXYNOS5_L2RSTDISABLE_VALUE BIT(3) - -#define S5P_PAD_RET_MAUDIO_OPTION 0x3028 -#define S5P_PAD_RET_MMC2_OPTION 0x30c8 -#define S5P_PAD_RET_GPIO_OPTION 0x3108 -#define S5P_PAD_RET_UART_OPTION 0x3128 -#define S5P_PAD_RET_MMCA_OPTION 0x3148 -#define S5P_PAD_RET_MMCB_OPTION 0x3168 -#define S5P_PAD_RET_EBIA_OPTION 0x3188 -#define S5P_PAD_RET_EBIB_OPTION 0x31A8 -#define S5P_PAD_RET_SPI_OPTION 0x31c8 - -#define S5P_PS_HOLD_CONTROL 0x330C -#define S5P_PS_HOLD_EN (1 << 31) -#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8) - -#define S5P_CAM_OPTION 0x3C08 -#define S5P_MFC_OPTION 0x3C48 -#define S5P_G3D_OPTION 0x3C68 -#define S5P_LCD0_OPTION 0x3C88 -#define S5P_LCD1_OPTION 0x3CA8 -#define S5P_ISP_OPTION S5P_LCD1_OPTION - -#define S5P_CORE_LOCAL_PWR_EN 0x3 -#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) -#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) - -/* Only for EXYNOS4210 */ -#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 -#define S5P_CMU_RESET_LCD1_LOWPWR 0x1174 -#define S5P_MODIMIF_MEM_LOWPWR 0x11C4 -#define S5P_PCIE_MEM_LOWPWR 0x11E0 -#define S5P_SATA_MEM_LOWPWR 0x11E4 -#define S5P_LCD1_LOWPWR 0x1394 - -/* Only for EXYNOS4x12 */ -#define S5P_ISP_ARM_LOWPWR 0x1050 -#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR 0x1054 -#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR 0x1058 -#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR 0x1110 -#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR 0x1114 -#define S5P_CMU_RESET_COREBLK_LOWPWR 0x111C -#define S5P_MPLLUSER_SYSCLK_LOWPWR 0x1130 -#define S5P_CMU_CLKSTOP_ISP_LOWPWR 0x1154 -#define S5P_CMU_RESET_ISP_LOWPWR 0x1174 -#define S5P_TOP_BUS_COREBLK_LOWPWR 0x1190 -#define S5P_TOP_RETENTION_COREBLK_LOWPWR 0x1194 -#define S5P_TOP_PWR_COREBLK_LOWPWR 0x1198 -#define S5P_OSCCLK_GATE_LOWPWR 0x11A4 -#define S5P_LOGIC_RESET_COREBLK_LOWPWR 0x11B0 -#define S5P_OSCCLK_GATE_COREBLK_LOWPWR 0x11B4 -#define S5P_HSI_MEM_LOWPWR 0x11C4 -#define S5P_ROTATOR_MEM_LOWPWR 0x11DC -#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR 0x123C -#define S5P_PAD_ISOLATION_COREBLK_LOWPWR 0x1250 -#define S5P_GPIO_MODE_COREBLK_LOWPWR 0x1320 -#define S5P_TOP_ASB_RESET_LOWPWR 0x1344 -#define S5P_TOP_ASB_ISOLATION_LOWPWR 0x1348 -#define S5P_ISP_LOWPWR 0x1394 -#define S5P_DRAM_FREQ_DOWN_LOWPWR 0x13B0 -#define S5P_DDRPHY_DLLOFF_LOWPWR 0x13B4 -#define S5P_CMU_SYSCLK_ISP_LOWPWR 0x13B8 -#define S5P_CMU_SYSCLK_GPS_LOWPWR 0x13BC -#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR 0x13C0 - -#define S5P_ARM_L2_0_OPTION 0x2608 -#define S5P_ARM_L2_1_OPTION 0x2628 -#define S5P_ONENAND_MEM_OPTION 0x2E08 -#define S5P_HSI_MEM_OPTION 0x2E28 -#define S5P_G2D_ACP_MEM_OPTION 0x2E48 -#define S5P_USBOTG_MEM_OPTION 0x2E68 -#define S5P_HSMMC_MEM_OPTION 0x2E88 -#define S5P_CSSYS_MEM_OPTION 0x2EA8 -#define S5P_SECSS_MEM_OPTION 0x2EC8 -#define S5P_ROTATOR_MEM_OPTION 0x2F48 - -/* Only for EXYNOS4412 */ -#define S5P_ARM_CORE2_LOWPWR 0x1020 -#define S5P_DIS_IRQ_CORE2 0x1024 -#define S5P_DIS_IRQ_CENTRAL2 0x1028 -#define S5P_ARM_CORE3_LOWPWR 0x1030 -#define S5P_DIS_IRQ_CORE3 0x1034 -#define S5P_DIS_IRQ_CENTRAL3 0x1038 - -/* Only for EXYNOS3XXX */ -#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000 -#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 -#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 -#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010 -#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 -#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 -#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050 -#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080 -#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0 -#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 -#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 -#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C -#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110 -#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114 -#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C -#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120 -#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124 -#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128 -#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C -#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130 -#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134 -#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138 -#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140 -#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148 -#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C -#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150 -#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154 -#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158 -#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160 -#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168 -#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C -#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170 -#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174 -#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178 -#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180 -#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184 -#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188 -#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190 -#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194 -#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198 -#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0 -#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4 -#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0 -#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4 -#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 -#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204 -#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208 -#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218 -#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 -#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 -#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228 -#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C -#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 -#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 -#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238 -#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240 -#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260 -#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280 -#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284 -#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0 -#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4 -#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300 -#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340 -#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344 -#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 -#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350 -#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354 -#define EXYNOS3_CAM_SYS_PWR_REG 0x1380 -#define EXYNOS3_MFC_SYS_PWR_REG 0x1388 -#define EXYNOS3_G3D_SYS_PWR_REG 0x138C -#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390 -#define EXYNOS3_ISP_SYS_PWR_REG 0x1394 -#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398 -#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0 -#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4 -#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8 -#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0 -#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4 -#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8 - -#define EXYNOS3_ARM_CORE0_OPTION 0x2008 -#define EXYNOS3_ARM_CORE_OPTION(_nr) \ - (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80)) - -#define EXYNOS3_ARM_COMMON_OPTION 0x2408 -#define EXYNOS3_ARM_L2_OPTION 0x2608 -#define EXYNOS3_TOP_PWR_OPTION 0x2C48 -#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8 -#define EXYNOS3_XUSBXTI_DURATION 0x341C -#define EXYNOS3_XXTI_DURATION 0x343C -#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C -#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C -#define XUSBXTI_DURATION 0x00000BB8 -#define XXTI_DURATION XUSBXTI_DURATION -#define EXT_REGULATOR_DURATION 0x00001D4C -#define EXT_REGULATOR_COREBLK_DURATION EXT_REGULATOR_DURATION - -/* for XXX_OPTION */ -#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0) -#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1) -#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) - -/* For EXYNOS5 */ - -#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408 -#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C - -#define EXYNOS5_USE_RETENTION BIT(4) -#define EXYNOS5_SYS_WDTRESET (1 << 20) - -#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000 -#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 -#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 -#define EXYNOS5_ARM_CORE1_SYS_PWR_REG 0x1010 -#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 -#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 -#define EXYNOS5_FSYS_ARM_SYS_PWR_REG 0x1040 -#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG 0x1048 -#define EXYNOS5_ISP_ARM_SYS_PWR_REG 0x1050 -#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS5_ARM_COMMON_SYS_PWR_REG 0x1080 -#define EXYNOS5_ARM_L2_SYS_PWR_REG 0x10C0 -#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 -#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 -#define EXYNOS5_CMU_RESET_SYS_PWR_REG 0x110C -#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG 0x1120 -#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG 0x1124 -#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG 0x112C -#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG 0x1130 -#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG 0x1134 -#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG 0x1138 -#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG 0x1140 -#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG 0x1144 -#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG 0x1148 -#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG 0x114C -#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG 0x1150 -#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG 0x1154 -#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1164 -#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1170 -#define EXYNOS5_TOP_BUS_SYS_PWR_REG 0x1180 -#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG 0x1184 -#define EXYNOS5_TOP_PWR_SYS_PWR_REG 0x1188 -#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG 0x1190 -#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG 0x1194 -#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG 0x1198 -#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG 0x11A0 -#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG 0x11A4 -#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG 0x11B0 -#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG 0x11B4 -#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG 0x11C0 -#define EXYNOS5_G2D_MEM_SYS_PWR_REG 0x11C8 -#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG 0x11CC -#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG 0x11D0 -#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG 0x11D4 -#define EXYNOS5_SECSS_MEM_SYS_PWR_REG 0x11D8 -#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG 0x11DC -#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG 0x11E0 -#define EXYNOS5_INTROM_MEM_SYS_PWR_REG 0x11E4 -#define EXYNOS5_JPEG_MEM_SYS_PWR_REG 0x11E8 -#define EXYNOS5_HSI_MEM_SYS_PWR_REG 0x11EC -#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG 0x11F4 -#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC -#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 -#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204 -#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG 0x1208 -#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 -#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 -#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228 -#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C -#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 -#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 -#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG 0x1238 -#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG 0x123C -#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG 0x1240 -#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG 0x1250 -#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG 0x1260 -#define EXYNOS5_XUSBXTI_SYS_PWR_REG 0x1280 -#define EXYNOS5_XXTI_SYS_PWR_REG 0x1284 -#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG 0x12C0 -#define EXYNOS5_GPIO_MODE_SYS_PWR_REG 0x1300 -#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG 0x1320 -#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG 0x1340 -#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG 0x1344 -#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 -#define EXYNOS5_GSCL_SYS_PWR_REG 0x1400 -#define EXYNOS5_ISP_SYS_PWR_REG 0x1404 -#define EXYNOS5_MFC_SYS_PWR_REG 0x1408 -#define EXYNOS5_G3D_SYS_PWR_REG 0x140C -#define EXYNOS5_DISP1_SYS_PWR_REG 0x1414 -#define EXYNOS5_MAU_SYS_PWR_REG 0x1418 -#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG 0x1480 -#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1484 -#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1488 -#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x148C -#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1494 -#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1498 -#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG 0x14C0 -#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG 0x14C4 -#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG 0x14C8 -#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG 0x14CC -#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D4 -#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D8 -#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG 0x1580 -#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG 0x1584 -#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG 0x1588 -#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG 0x158C -#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG 0x1594 -#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG 0x1598 - -#define EXYNOS5_ARM_CORE0_OPTION 0x2008 -#define EXYNOS5_ARM_CORE1_OPTION 0x2088 -#define EXYNOS5_FSYS_ARM_OPTION 0x2208 -#define EXYNOS5_ISP_ARM_OPTION 0x2288 -#define EXYNOS5_ARM_COMMON_OPTION 0x2408 -#define EXYNOS5_ARM_L2_OPTION 0x2608 -#define EXYNOS5_TOP_PWR_OPTION 0x2C48 -#define EXYNOS5_TOP_PWR_SYSMEM_OPTION 0x2CC8 -#define EXYNOS5_JPEG_MEM_OPTION 0x2F48 -#define EXYNOS5_GSCL_OPTION 0x4008 -#define EXYNOS5_ISP_OPTION 0x4028 -#define EXYNOS5_MFC_OPTION 0x4048 -#define EXYNOS5_G3D_OPTION 0x4068 -#define EXYNOS5_DISP1_OPTION 0x40A8 -#define EXYNOS5_MAU_OPTION 0x40C8 - -#define EXYNOS5_USE_SC_FEEDBACK (1 << 1) -#define EXYNOS5_USE_SC_COUNTER (1 << 0) - -#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) - -#define EXYNOS5_OPTION_USE_STANDBYWFE (1 << 24) -#define EXYNOS5_OPTION_USE_STANDBYWFI (1 << 16) - -#define EXYNOS5_OPTION_USE_RETENTION (1 << 4) - -#define EXYNOS5420_SWRESET_KFC_SEL 0x3 - -/* Only for EXYNOS5420 */ -#define EXYNOS5420_ISP_ARM_OPTION 0x2488 -#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3) - -#define EXYNOS5420_LPI_MASK 0x0004 -#define EXYNOS5420_LPI_MASK1 0x0008 -#define EXYNOS5420_UFS BIT(8) -#define EXYNOS5420_ATB_KFC BIT(13) -#define EXYNOS5420_ATB_ISP_ARM BIT(19) -#define EXYNOS5420_EMULATION BIT(31) -#define ATB_ISP_ARM BIT(12) -#define ATB_KFC BIT(13) -#define ATB_NOC BIT(14) - -#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE 0x0100 -#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI 0x0104 -#define EXYNOS5420_UP_SCHEDULER 0x0120 -#define SPREAD_ENABLE 0xF -#define SPREAD_USE_STANDWFI 0xF - -#define EXYNOS5420_KFC_CORE_RESET0 BIT(8) -#define EXYNOS5420_KFC_ETM_RESET0 BIT(20) - -#define EXYNOS5420_KFC_CORE_RESET(_nr) \ - ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr)) - -#define EXYNOS5420_BB_CON1 0x0784 -#define EXYNOS5420_BB_SEL_EN BIT(31) -#define EXYNOS5420_BB_PMOS_EN BIT(7) -#define EXYNOS5420_BB_1300X 0XF - -#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020 -#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024 -#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028 -#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG 0x1030 -#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG 0x1034 -#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG 0x1038 -#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG 0x1040 -#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG 0x1044 -#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG 0x1048 -#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG 0x1050 -#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG 0x1060 -#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG 0x1064 -#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG 0x1068 -#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG 0x1070 -#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG 0x1074 -#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG 0x1078 -#define EXYNOS5420_ISP_ARM_SYS_PWR_REG 0x1090 -#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1094 -#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1098 -#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG 0x10A0 -#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG 0x10B0 -#define EXYNOS5420_KFC_L2_SYS_PWR_REG 0x10D0 -#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG 0x1158 -#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG 0x115C -#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG 0x1160 -#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG 0x1174 -#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG 0x1178 -#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG 0x11B8 -#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG 0x11BC -#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR 0x11C0 -#define EXYNOS5420_USBDEV_MEM_SYS_PWR 0x11CC -#define EXYNOS5420_USBDEV1_MEM_SYS_PWR 0x11D0 -#define EXYNOS5420_SDMMC_MEM_SYS_PWR 0x11D4 -#define EXYNOS5420_CSSYS_MEM_SYS_PWR 0x11D8 -#define EXYNOS5420_SECSS_MEM_SYS_PWR 0x11DC -#define EXYNOS5420_ROTATOR_MEM_SYS_PWR 0x11E0 -#define EXYNOS5420_INTRAM_MEM_SYS_PWR 0x11E4 -#define EXYNOS5420_INTROM_MEM_SYS_PWR 0x11E8 -#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1208 -#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1210 -#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG 0x1214 -#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1218 -#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG 0x121C -#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1220 -#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG 0x1224 -#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1228 -#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG 0x122C -#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG 0x1230 -#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG 0x1234 -#define EXYNOS5420_DISP1_SYS_PWR_REG 0x1410 -#define EXYNOS5420_MAU_SYS_PWR_REG 0x1414 -#define EXYNOS5420_G2D_SYS_PWR_REG 0x1418 -#define EXYNOS5420_MSC_SYS_PWR_REG 0x141C -#define EXYNOS5420_FSYS_SYS_PWR_REG 0x1420 -#define EXYNOS5420_FSYS2_SYS_PWR_REG 0x1424 -#define EXYNOS5420_PSGEN_SYS_PWR_REG 0x1428 -#define EXYNOS5420_PERIC_SYS_PWR_REG 0x142C -#define EXYNOS5420_WCORE_SYS_PWR_REG 0x1430 -#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1490 -#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1494 -#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG 0x1498 -#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG 0x149C -#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG 0x14A0 -#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG 0x14A4 -#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG 0x14A8 -#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG 0x14AC -#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG 0x14B0 -#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG 0x14BC -#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D0 -#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D4 -#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG 0x14D8 -#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG 0x14DC -#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG 0x14E0 -#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG 0x14E4 -#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG 0x14E8 -#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG 0x14EC -#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG 0x14F0 -#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG 0x14F4 -#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG 0x1570 -#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG 0x1574 -#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG 0x1578 -#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG 0x157C -#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG 0x1590 -#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG 0x1594 -#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG 0x1598 -#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG 0x159C -#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG 0x15A0 -#define EXYNOS5420_SFR_AXI_CGDIS1 0x15E4 -#define EXYNOS_ARM_CORE2_CONFIGURATION 0x2100 -#define EXYNOS5420_ARM_CORE2_OPTION 0x2108 -#define EXYNOS_ARM_CORE3_CONFIGURATION 0x2180 -#define EXYNOS5420_ARM_CORE3_OPTION 0x2188 -#define EXYNOS5420_ARM_COMMON_STATUS 0x2504 -#define EXYNOS5420_ARM_COMMON_OPTION 0x2508 -#define EXYNOS5420_KFC_COMMON_STATUS 0x2584 -#define EXYNOS5420_KFC_COMMON_OPTION 0x2588 -#define EXYNOS5420_LOGIC_RESET_DURATION3 0x2D1C - -#define EXYNOS5420_PAD_RET_GPIO_OPTION 0x30C8 -#define EXYNOS5420_PAD_RET_UART_OPTION 0x30E8 -#define EXYNOS5420_PAD_RET_MMCA_OPTION 0x3108 -#define EXYNOS5420_PAD_RET_MMCB_OPTION 0x3128 -#define EXYNOS5420_PAD_RET_MMCC_OPTION 0x3148 -#define EXYNOS5420_PAD_RET_HSI_OPTION 0x3168 -#define EXYNOS5420_PAD_RET_SPI_OPTION 0x31C8 -#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION 0x31E8 -#define EXYNOS_PAD_RET_DRAM_OPTION 0x3008 -#define EXYNOS_PAD_RET_MAUDIO_OPTION 0x3028 -#define EXYNOS_PAD_RET_JTAG_OPTION 0x3048 -#define EXYNOS_PAD_RET_GPIO_OPTION 0x3108 -#define EXYNOS_PAD_RET_UART_OPTION 0x3128 -#define EXYNOS_PAD_RET_MMCA_OPTION 0x3148 -#define EXYNOS_PAD_RET_MMCB_OPTION 0x3168 -#define EXYNOS_PAD_RET_EBIA_OPTION 0x3188 -#define EXYNOS_PAD_RET_EBIB_OPTION 0x31A8 - -#define EXYNOS_PS_HOLD_CONTROL 0x330C - -/* For SYS_PWR_REG */ -#define EXYNOS_SYS_PWR_CFG BIT(0) - -#define EXYNOS5420_MFC_CONFIGURATION 0x4060 -#define EXYNOS5420_MFC_STATUS 0x4064 -#define EXYNOS5420_MFC_OPTION 0x4068 -#define EXYNOS5420_G3D_CONFIGURATION 0x4080 -#define EXYNOS5420_G3D_STATUS 0x4084 -#define EXYNOS5420_G3D_OPTION 0x4088 -#define EXYNOS5420_DISP0_CONFIGURATION 0x40A0 -#define EXYNOS5420_DISP0_STATUS 0x40A4 -#define EXYNOS5420_DISP0_OPTION 0x40A8 -#define EXYNOS5420_DISP1_CONFIGURATION 0x40C0 -#define EXYNOS5420_DISP1_STATUS 0x40C4 -#define EXYNOS5420_DISP1_OPTION 0x40C8 -#define EXYNOS5420_MAU_CONFIGURATION 0x40E0 -#define EXYNOS5420_MAU_STATUS 0x40E4 -#define EXYNOS5420_MAU_OPTION 0x40E8 -#define EXYNOS5420_FSYS2_OPTION 0x4168 -#define EXYNOS5420_PSGEN_OPTION 0x4188 - -/* For EXYNOS_CENTRAL_SEQ_OPTION */ -#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0 BIT(16) -#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1 BUT(17) -#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0 BIT(24) -#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1 BIT(25) - -#define EXYNOS5420_ARM_USE_STANDBY_WFI0 BIT(4) -#define EXYNOS5420_ARM_USE_STANDBY_WFI1 BIT(5) -#define EXYNOS5420_ARM_USE_STANDBY_WFI2 BIT(6) -#define EXYNOS5420_ARM_USE_STANDBY_WFI3 BIT(7) -#define EXYNOS5420_KFC_USE_STANDBY_WFI0 BIT(8) -#define EXYNOS5420_KFC_USE_STANDBY_WFI1 BIT(9) -#define EXYNOS5420_KFC_USE_STANDBY_WFI2 BIT(10) -#define EXYNOS5420_KFC_USE_STANDBY_WFI3 BIT(11) -#define EXYNOS5420_ARM_USE_STANDBY_WFE0 BIT(16) -#define EXYNOS5420_ARM_USE_STANDBY_WFE1 BIT(17) -#define EXYNOS5420_ARM_USE_STANDBY_WFE2 BIT(18) -#define EXYNOS5420_ARM_USE_STANDBY_WFE3 BIT(19) -#define EXYNOS5420_KFC_USE_STANDBY_WFE0 BIT(20) -#define EXYNOS5420_KFC_USE_STANDBY_WFE1 BIT(21) -#define EXYNOS5420_KFC_USE_STANDBY_WFE2 BIT(22) -#define EXYNOS5420_KFC_USE_STANDBY_WFE3 BIT(23) - -#define DUR_WAIT_RESET 0xF - -#define EXYNOS5420_USE_STANDBY_WFI_ALL (EXYNOS5420_ARM_USE_STANDBY_WFI0 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI1 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI2 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI3 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI0 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI1 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI2 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI3) - -#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c index 0b04b6b0fa30..8ef1f3ee4e98 100644 --- a/arch/arm/mach-exynos/s5p-dev-mfc.c +++ b/arch/arm/mach-exynos/s5p-dev-mfc.c @@ -9,7 +9,6 @@ */ #include <linux/kernel.h> -#include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/memblock.h> diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3049aa..fee2b003e662 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -24,6 +24,8 @@ #include <linux/of_address.h> #include <linux/err.h> #include <linux/regulator/machine.h> +#include <linux/soc/samsung/exynos-pmu.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -35,8 +37,6 @@ #include <plat/pm-common.h> #include "common.h" -#include "exynos-pmu.h" -#include "regs-pmu.h" #include "regs-srom.h" #define REG_TABLE_END (-1U) diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 07152d00fc50..cbbdd84cf49a 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -68,7 +68,6 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI - select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index 2478d9f4d92d..469a76ea0459 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -227,5 +227,5 @@ void __init gemini_gpio_init(void) (void *)i); } - BUG_ON(gpiochip_add(&gemini_gpio_chip)); + BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL)); } diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 16496a071ecb..cda330c93d61 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(struct irq_desc *desc) /* irq = gpio irq number */ desc->irq_data.chip->irq_mask(&desc->irq_data); - imr_val = __raw_readw(brd_io + INTR_MASK_REG); - int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + imr_val = imx_readw(brd_io + INTR_MASK_REG); + int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val; expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { @@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d) u16 reg; u32 expio = d->hwirq; - reg = __raw_readw(brd_io + INTR_MASK_REG); + reg = imx_readw(brd_io + INTR_MASK_REG); reg |= (1 << expio); - __raw_writew(reg, brd_io + INTR_MASK_REG); + imx_writew(reg, brd_io + INTR_MASK_REG); } static void expio_ack_irq(struct irq_data *d) { u32 expio = d->hwirq; - __raw_writew(1 << expio, brd_io + INTR_RESET_REG); - __raw_writew(0, brd_io + INTR_RESET_REG); + imx_writew(1 << expio, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); expio_mask_irq(d); } @@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d) u16 reg; u32 expio = d->hwirq; - reg = __raw_readw(brd_io + INTR_MASK_REG); + reg = imx_readw(brd_io + INTR_MASK_REG); reg &= ~(1 << expio); - __raw_writew(reg, brd_io + INTR_MASK_REG); + imx_writew(reg, brd_io + INTR_MASK_REG); } static struct irq_chip expio_irq_chip = { @@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) if (brd_io == NULL) return -ENOMEM; - if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || - (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || - (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { pr_info("3-Stack Debug board not detected\n"); iounmap(brd_io); brd_io = NULL; @@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) gpio_direction_input(intr_gpio); /* disable the interrupt and clear the status */ - __raw_writew(0, brd_io + INTR_MASK_REG); - __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); - __raw_writew(0, brd_io + INTR_RESET_REG); - __raw_writew(0x1F, brd_io + INTR_MASK_REG); + imx_writew(0, brd_io + INTR_MASK_REG); + imx_writew(0xFFFF, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); + imx_writew(0x1F, brd_io + INTR_MASK_REG); irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); WARN_ON(irq_base < 0); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 15df34fbdf44..8973fae25436 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -2,7 +2,7 @@ menuconfig ARCH_MXC bool "Freescale i.MX family" depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select ARCH_REQUIRE_GPIOLIB - select ARM_CPU_SUSPEND if PM + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP select PINCTRL @@ -511,6 +511,7 @@ config SOC_IMX53 config SOC_IMX6 bool + select ARM_CPU_SUSPEND if PM select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC @@ -561,6 +562,7 @@ config SOC_IMX7D bool "i.MX7 Dual support" select PINCTRL_IMX7D select ARM_GIC + select HAVE_ARM_ARCH_TIMER select HAVE_IMX_ANATOP select HAVE_IMX_MMDC select HAVE_IMX_SRC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index fb689d813b09..9fbe624a5ef9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-y := cpu.o system.o irq-common.o obj-$(CONFIG_SOC_IMX1) += mm-imx1.o obj-$(CONFIG_SOC_IMX21) += mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o +obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 231bb250c571..649a84c251ad 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -129,7 +129,14 @@ void __init imx_init_revision_from_anatop(void) switch (digprog & 0xff) { case 0: - revision = IMX_CHIP_REVISION_1_0; + /* + * For i.MX6QP, most of the code for i.MX6Q can be resued, + * so internally, we identify it as i.MX6Q Rev 2.0 + */ + if (digprog >> 8 & 0x01) + revision = IMX_CHIP_REVISION_2_0; + else + revision = IMX_CHIP_REVISION_1_0; break; case 1: revision = IMX_CHIP_REVISION_1_1; @@ -151,7 +158,14 @@ void __init imx_init_revision_from_anatop(void) revision = IMX_CHIP_REVISION_1_5; break; default: - revision = IMX_CHIP_REVISION_UNKNOWN; + /* + * Fail back to return raw register value instead of 0xff. + * It will be easy to know version information in SOC if it + * can't be recognized by known version. And some chip's (i.MX7D) + * digprog value match linux version format, so it needn't map + * again and we can use register value directly. + */ + revision = digprog & 0xff; } mxc_set_cpu_type(digprog >> 16 & 0xff); diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 1a8932335b21..7fa176e792bd 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -66,12 +66,12 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; if (irq < AVIC_NUM_IRQS / 2) { - irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); + irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { irq -= AVIC_NUM_IRQS / 2; - irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); + irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } return 0; @@ -94,8 +94,8 @@ static void avic_irq_suspend(struct irq_data *d) struct irq_chip_type *ct = gc->chip_types; int idx = d->hwirq >> 5; - avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); - __raw_writel(gc->wake_active, avic_base + ct->regs.mask); + avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask); + imx_writel(gc->wake_active, avic_base + ct->regs.mask); } static void avic_irq_resume(struct irq_data *d) @@ -104,7 +104,7 @@ static void avic_irq_resume(struct irq_data *d) struct irq_chip_type *ct = gc->chip_types; int idx = d->hwirq >> 5; - __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); + imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); } #else @@ -140,7 +140,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) u32 nivector; do { - nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16; + nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16; if (nivector == 0xffff) break; @@ -164,16 +164,16 @@ void __init mxc_init_irq(void __iomem *irqbase) /* put the AVIC into the reset value with * all interrupts disabled */ - __raw_writel(0, avic_base + AVIC_INTCNTL); - __raw_writel(0x1f, avic_base + AVIC_NIMASK); + imx_writel(0, avic_base + AVIC_INTCNTL); + imx_writel(0x1f, avic_base + AVIC_NIMASK); /* disable all interrupts */ - __raw_writel(0, avic_base + AVIC_INTENABLEH); - __raw_writel(0, avic_base + AVIC_INTENABLEL); + imx_writel(0, avic_base + AVIC_INTENABLEH); + imx_writel(0, avic_base + AVIC_INTENABLEL); /* all IRQ no FIQ */ - __raw_writel(0, avic_base + AVIC_INTTYPEH); - __raw_writel(0, avic_base + AVIC_INTTYPEL); + imx_writel(0, avic_base + AVIC_INTTYPEH); + imx_writel(0, avic_base + AVIC_INTTYPEL); irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); WARN_ON(irq_base < 0); @@ -188,7 +188,7 @@ void __init mxc_init_irq(void __iomem *irqbase) /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) - __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + imx_writel(0, avic_base + AVIC_NIPRIORITY(i)); set_handle_irq(avic_handle_irq); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 32b83f09da18..58a38464480d 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -66,6 +66,7 @@ void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); +void imx25_pm_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index fe8d36f7e30e..8d2ae4091465 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -39,8 +39,7 @@ static int mx27_read_cpu_rev(void) * the silicon revision very early we read it here to * avoid any further hooks */ - val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR - + SYS_CHIP_ID)); + val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index fde1860a2521..3daf1959a2f0 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -39,7 +39,7 @@ static int mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); srev &= 0xff; for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index ec3aaa098c17..8a54234df23b 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -20,7 +20,7 @@ static int mx35_read_cpu_rev(void) { u32 rev; - rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 5b0f752d5507..6a96b7cf468f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -45,20 +45,20 @@ void __init imx_set_aips(void __iomem *base) * Set all MPROTx to be non-bufferable, trusted for R/W, * not forced to user-mode. */ - __raw_writel(0x77777777, base + 0x0); - __raw_writel(0x77777777, base + 0x4); + imx_writel(0x77777777, base + 0x0); + imx_writel(0x77777777, base + 0x4); /* * Set all OPACRx to be non-bufferable, to not require * supervisor privilege level for access, allow for * write access and untrusted master access. */ - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); + imx_writel(0x0, base + 0x40); + imx_writel(0x0, base + 0x44); + imx_writel(0x0, base + 0x48); + imx_writel(0x0, base + 0x4C); + reg = imx_readl(base + 0x50) & 0x00FFFFFF; + imx_writel(reg, base + 0x50); } void __init imx_aips_allow_unprivileged_access( diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index 08ce20771bb3..fb9a73a57d00 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -64,23 +64,23 @@ static inline void epit_irq_disable(void) { u32 val; - val = __raw_readl(timer_base + EPITCR); + val = imx_readl(timer_base + EPITCR); val &= ~EPITCR_OCIEN; - __raw_writel(val, timer_base + EPITCR); + imx_writel(val, timer_base + EPITCR); } static inline void epit_irq_enable(void) { u32 val; - val = __raw_readl(timer_base + EPITCR); + val = imx_readl(timer_base + EPITCR); val |= EPITCR_OCIEN; - __raw_writel(val, timer_base + EPITCR); + imx_writel(val, timer_base + EPITCR); } static void epit_irq_acknowledge(void) { - __raw_writel(EPITSR_OCIF, timer_base + EPITSR); + imx_writel(EPITSR_OCIF, timer_base + EPITSR); } static int __init epit_clocksource_init(struct clk *timer_clk) @@ -98,9 +98,9 @@ static int epit_set_next_event(unsigned long evt, { unsigned long tcmp; - tcmp = __raw_readl(timer_base + EPITCNR); + tcmp = imx_readl(timer_base + EPITCNR); - __raw_writel(tcmp - evt, timer_base + EPITCMPR); + imx_writel(tcmp - evt, timer_base + EPITCMPR); return 0; } @@ -213,11 +213,11 @@ void __init epit_timer_init(void __iomem *base, int irq) /* * Initialise to a known state (all timers off, and timing reset) */ - __raw_writel(0x0, timer_base + EPITCR); + imx_writel(0x0, timer_base + EPITCR); - __raw_writel(0xffffffff, timer_base + EPITLR); - __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, - timer_base + EPITCR); + imx_writel(0xffffffff, timer_base + EPITLR); + imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); /* init and register the timer to the framework */ epit_clocksource_init(timer_clk); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index cfc696b972f3..fd8720532471 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -374,8 +374,13 @@ static struct pu_domain imx6q_pu_domain = { .name = "PU", .power_off = imx6q_pm_pu_power_off, .power_on = imx6q_pm_pu_power_on, - .power_off_latency_ns = 25000, - .power_on_latency_ns = 2000000, + .states = { + [0] = { + .power_off_latency_ns = 25000, + .power_on_latency_ns = 2000000, + }, + }, + .state_count = 1, }, }; diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index b5e976816b63..6c28d28b3c64 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> diag_reg_offset: .word g_diag_reg - . @@ -25,6 +26,7 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) +ARM_BE8(setend be) @ go BE8 if entered LE set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 0b5ba4bf572a..3982e91b2f3e 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -57,10 +57,10 @@ void mxc_iomux_mode(unsigned int pin_mode) spin_lock(&gpio_mux_lock); - l = __raw_readl(reg); + l = imx_readl(reg); l &= ~(0xff << (field * 8)); l |= mode << (field * 8); - __raw_writel(l, reg); + imx_writel(l, reg); spin_unlock(&gpio_mux_lock); } @@ -82,10 +82,10 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) spin_lock(&gpio_mux_lock); - l = __raw_readl(reg); + l = imx_readl(reg); l &= ~(0x1ff << (field * 10)); l |= config << (field * 10); - __raw_writel(l, reg); + imx_writel(l, reg); spin_unlock(&gpio_mux_lock); } @@ -163,12 +163,12 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) u32 l; spin_lock(&gpio_mux_lock); - l = __raw_readl(IOMUXGPR); + l = imx_readl(IOMUXGPR); if (en) l |= gp; else l &= ~gp; - __raw_writel(l, IOMUXGPR); + imx_writel(l, IOMUXGPR); spin_unlock(&gpio_mux_lock); } diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index ecd543664644..7aa90c863ad9 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -38,12 +38,12 @@ static unsigned imx_iomuxv1_numports; static inline unsigned long imx_iomuxv1_readl(unsigned offset) { - return __raw_readl(imx_iomuxv1_baseaddr + offset); + return imx_readl(imx_iomuxv1_baseaddr + offset); } static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) { - __raw_writel(val, imx_iomuxv1_baseaddr + offset); + imx_writel(val, imx_iomuxv1_baseaddr + offset); } static inline void imx_iomuxv1_rmwl(unsigned offset, diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index a53b2e64f98d..ca59d5f2ec92 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -45,13 +45,13 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; if (mux_ctrl_ofs) - __raw_writel(mux_mode, base + mux_ctrl_ofs); + imx_writel(mux_mode, base + mux_ctrl_ofs); if (sel_input_ofs) - __raw_writel(sel_input, base + sel_input_ofs); + imx_writel(sel_input, base + sel_input_ofs); if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) - __raw_writel(pad_ctrl, base + pad_ctrl_ofs); + imx_writel(pad_ctrl, base + pad_ctrl_ofs); return 0; } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index f2060523ba48..eaee47a2fcc0 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -525,8 +525,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | - (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); + imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), + mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c index 9379fd0a7b4d..32dcb5e99e23 100644 --- a/arch/arm/mach-imx/mach-imx25.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -41,6 +41,7 @@ static const char * const imx25_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .init_early = imx25_init_early, + .init_late = imx25_pm_init, .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index b015129e4045..6883fbaf9484 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -40,11 +40,10 @@ static void __init imx51_ipu_mipi_setup(void) WARN_ON(!hsc_addr); /* setup MIPI module to legacy mode */ - __raw_writel(0xf00, hsc_addr); + imx_writel(0xf00, hsc_addr); /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ - __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, - hsc_addr + 0x800); + imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800); iounmap(hsc_addr); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3878494bd118..cb27d566d5ab 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void) { struct device *parent; - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx_get_soc_revision()); + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) + imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); + else + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); parent = imx_soc_device_init(); if (parent == NULL) @@ -399,6 +402,7 @@ static void __init imx6q_init_irq(void) static const char * const imx6q_dt_compat[] __initconst = { "fsl,imx6dl", "fsl,imx6q", + "fsl,imx6qp", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index eb1c3477c48a..a4c389eae31a 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,6 +13,8 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#include <linux/gpio/driver.h> +/* Needed for gpio_to_irq() */ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -202,9 +204,9 @@ static struct i2c_board_info mx27ads_i2c_devices[] = { static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) { if (value) - __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); else - __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) @@ -243,7 +245,7 @@ static void __init mx27ads_regulator_init(void) vchip->ngpio = 1; vchip->direction_output = vgpio_dir_out; vchip->set = vgpio_set; - gpiochip_add(vchip); + gpiochip_add_data(vchip, NULL); platform_device_register_data(NULL, "reg-fixed-voltage", PLATFORM_DEVID_AUTO, @@ -364,7 +366,7 @@ static void __init mx27ads_timer_init(void) { unsigned long fref = 26000000; - if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) + if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) fref = 27000000; mx27_clocks_init(fref); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 2b147e4bf9c9..4f2c56d44ba1 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -160,8 +160,8 @@ static void mx31ads_expio_irq_handler(struct irq_desc *desc) u32 int_valid; u32 expio_irq; - imr_val = __raw_readw(PBC_INTMASK_SET_REG); - int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; + imr_val = imx_readw(PBC_INTMASK_SET_REG); + int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val; expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { @@ -180,8 +180,8 @@ static void expio_mask_irq(struct irq_data *d) { u32 expio = d->hwirq; /* mask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); - __raw_readw(PBC_INTMASK_CLEAR_REG); + imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG); + imx_readw(PBC_INTMASK_CLEAR_REG); } /* @@ -192,7 +192,7 @@ static void expio_ack_irq(struct irq_data *d) { u32 expio = d->hwirq; /* clear the interrupt status */ - __raw_writew(1 << expio, PBC_INTSTATUS_REG); + imx_writew(1 << expio, PBC_INTSTATUS_REG); } /* @@ -203,7 +203,7 @@ static void expio_unmask_irq(struct irq_data *d) { u32 expio = d->hwirq; /* unmask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_SET_REG); + imx_writew(1 << expio, PBC_INTMASK_SET_REG); } static struct irq_chip expio_irq_chip = { @@ -226,8 +226,8 @@ static void __init mx31ads_init_expio(void) mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ - __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); - __raw_writew(0xFFFF, PBC_INTSTATUS_REG); + imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); + imx_writew(0xFFFF, PBC_INTSTATUS_REG); irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); WARN_ON(irq_base < 0); diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index bb6f8a52a6b8..4f2d99888afd 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -509,7 +509,7 @@ static void mx31moboard_poweroff(void) mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); - __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); + imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } static int mx31moboard_baseboard; diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 5c2764604727..34df64f133ed 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,9 +190,9 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); - __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); - __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index a5b1af6d7441..d32704256781 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -193,4 +193,9 @@ extern struct cpu_op *(*get_cpu_op)(int *op); #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) +#define imx_readl readl_relaxed +#define imx_readw readw_relaxed +#define imx_writel writel_relaxed +#define imx_writew writew_relaxed + #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c new file mode 100644 index 000000000000..8bba9fcd96f6 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx25.c @@ -0,0 +1,37 @@ +/* + * Copyright 2016 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> + +static int imx25_suspend_enter(suspend_state_t state) +{ + if (!IS_ENABLED(CONFIG_PM)) + return 0; + + switch (state) { + case PM_SUSPEND_MEM: + cpu_do_idle(); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct platform_suspend_ops imx25_suspend_ops = { + .enter = imx25_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx25_pm_init(void) +{ + suspend_set_ops(&imx25_suspend_ops); +} diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 56d02d064fbf..43096c8990d4 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -19,9 +19,9 @@ static int mx27_suspend_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: /* Clear MPEN and SPEN to disable MPLL/SPLL */ - cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); cscr &= 0xFFFFFFFC; - __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ cpu_do_idle(); break; diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c index 6a07006ff0f4..94c0898751d8 100644 --- a/arch/arm/mach-imx/pm-imx3.c +++ b/arch/arm/mach-imx/pm-imx3.c @@ -22,14 +22,14 @@ */ void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode) { - int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR); + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); reg &= ~MXC_CCM_CCMR_LPM_MASK; switch (mode) { case MX3_WAIT: if (cpu_is_mx35()) reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; - __raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); break; default: pr_err("Unknown cpu power mode: %d\n", mode); diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 532d4b08276d..868781fd460c 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -153,15 +153,15 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) int stop_mode = 0; /* always allow platform to issue a deep sleep mode request */ - plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & + plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & ~(MXC_CORTEXA8_PLAT_LPC_DSM); - ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) & + ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK); - arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & + arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR); - empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & + empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR); - empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & + empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR); switch (mode) { @@ -196,17 +196,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) return; } - __raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); - __raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); - __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); - __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); + imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); + imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); if (stop_mode) { empgc0 |= MXC_SRPGCR_PCR; empgc1 |= MXC_SRPGCR_PCR; - __raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); } } @@ -228,8 +228,8 @@ static int mx5_suspend_enter(suspend_state_t state) flush_cache_all(); /*clear the EMPGC0/1 bits */ - __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); if (imx5_suspend_in_ocram_fn) imx5_suspend_in_ocram_fn(suspend_ocram_base); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 4470376af5f8..58924b3844df 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -561,13 +561,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto put_node; pl310_cache_map_failed: - iounmap(&pm_info->gpc_base.vbase); + iounmap(pm_info->gpc_base.vbase); gpc_map_failed: - iounmap(&pm_info->iomuxc_base.vbase); + iounmap(pm_info->iomuxc_base.vbase); iomuxc_map_failed: - iounmap(&pm_info->src_base.vbase); + iounmap(pm_info->src_base.vbase); src_map_failed: - iounmap(&pm_info->mmdc_base.vbase); + iounmap(pm_info->mmdc_base.vbase); put_node: of_node_put(node); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 45f7f4e0a447..70b083fe934a 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -73,7 +73,7 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev, return 0; } -static struct reset_control_ops imx_src_ops = { +static const struct reset_control_ops imx_src_ops = { .reset = imx_src_reset_module, }; diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 51c35013b673..105d1ce4ed9d 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -54,7 +54,7 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) wcr_enable = (1 << 2); /* Assert SRS signal */ - __raw_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); /* * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be * written twice), we add another two writes to ensure there must be at @@ -62,8 +62,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) * the target check here, since the writes shouldn't be a huge burden * for other platforms. */ - __raw_writew(wcr_enable, wdog_base); - __raw_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); @@ -106,6 +106,9 @@ void __init imx_init_l2cache(void) goto out; } + if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN) + goto skip_if_enabled; + /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); val |= 0x70800000; @@ -122,6 +125,7 @@ void __init imx_init_l2cache(void) val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); +skip_if_enabled: iounmap(l2x0_base); of_node_put(np); diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 4de65eeda1eb..ae23d50f7861 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -65,10 +65,10 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; mask = 1U << (irq & 0x1F); - value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask; + value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask; if (type) value &= ~mask; - __raw_writel(value, tzic_base + TZIC_INTSEC0(index)); + imx_writel(value, tzic_base + TZIC_INTSEC0(index)); return 0; } @@ -82,15 +82,15 @@ static void tzic_irq_suspend(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); int idx = d->hwirq >> 5; - __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); + imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); } static void tzic_irq_resume(struct irq_data *d) { int idx = d->hwirq >> 5; - __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), - tzic_base + TZIC_WAKEUP0(idx)); + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)), + tzic_base + TZIC_WAKEUP0(idx)); } #else @@ -135,8 +135,8 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) handled = 0; for (i = 0; i < 4; i++) { - stat = __raw_readl(tzic_base + TZIC_HIPND(i)) & - __raw_readl(tzic_base + TZIC_INTSEC0(i)); + stat = imx_readl(tzic_base + TZIC_HIPND(i)) & + imx_readl(tzic_base + TZIC_INTSEC0(i)); while (stat) { handled = 1; @@ -166,18 +166,18 @@ void __init tzic_init_irq(void) /* put the TZIC into the reset value with * all interrupts disabled */ - i = __raw_readl(tzic_base + TZIC_INTCNTL); + i = imx_readl(tzic_base + TZIC_INTCNTL); - __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); - __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); - __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + imx_writel(0x80010001, tzic_base + TZIC_INTCNTL); + imx_writel(0x1f, tzic_base + TZIC_PRIOMASK); + imx_writel(0x02, tzic_base + TZIC_SYNCCTRL); for (i = 0; i < 4; i++) - __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); /* disable all interrupts */ for (i = 0; i < 4; i++) - __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); /* all IRQ no FIQ Warning :: No selection */ @@ -214,13 +214,13 @@ int tzic_enable_wake(void) { unsigned int i; - __raw_writel(1, tzic_base + TZIC_DSMINT); - if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + imx_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0)) return -EAGAIN; for (i = 0; i < 4; i++) - __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)), - tzic_base + TZIC_WAKEUP0(i)); + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)), + tzic_base + TZIC_WAKEUP0(i)); return 0; } diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index b01bdc9baf89..b2a85ba13f08 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -2,22 +2,16 @@ menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA - select ARM_PATCH_PHYS_VIRT if MMU - select AUTO_ZRELADDR - select COMMON_CLK select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS select HAVE_TCM select ICST select MFD_SYSCON - select MULTI_IRQ_HANDLER select PLAT_VERSATILE select POWER_RESET select POWER_RESET_VERSATILE select POWER_SUPPLY select SOC_INTEGRATOR_CM select SPARSE_IRQ - select USE_OF select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot deleted file mode 100644 index ff0a4b5b0a82..000000000000 --- a/arch/arm/mach-integrator/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 1cb6f2f02880..26874f608ca9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -27,7 +27,7 @@ #include <linux/clockchips.h> #include <linux/io.h> #include <linux/export.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <linux/cpu.h> #include <linux/pci.h> #include <linux/sched_clock.h> @@ -461,7 +461,7 @@ void __init ixp4xx_sys_init(void) platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); - gpiochip_add(&ixp4xx_gpio_chip); + gpiochip_add_data(&ixp4xx_gpio_chip, NULL); if (cpu_is_ixp46x()) { int region; diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index c5bae9c035d5..b7ddd27419c2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -395,204 +395,6 @@ #define CRP_AD_CBE_BESL 20 #define CRP_AD_CBE_WRITE 0x00010000 - -/* - * USB Device Controller - * - * These are used by the USB gadget driver, so they don't follow the - * IXP4XX_ naming convetions. - * - */ -# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) - -/* UDC Undocumented - Reserved1 */ -#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) -/* UDC Undocumented - Reserved2 */ -#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) -/* UDC Undocumented - Reserved3 */ -#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) -/* UDC Control Register */ -#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) -/* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) -/* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) -/* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) -/* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) -/* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) -/* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) -/* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) -/* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) -/* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) -/* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) -/* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) -/* UDC Endpoint 11 (IN) Control/Status Register */ -#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) -/* UDC Endpoint 12 (OUT) Control/Status Register */ -#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) -/* UDC Endpoint 13 (IN) Control/Status Register */ -#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) -/* UDC Endpoint 14 (OUT) Control/Status Register */ -#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) -/* UDC Endpoint 15 (Interrupt) Control/Status Register */ -#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) -/* UDC Frame Number Register High */ -#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) -/* UDC Frame Number Register Low */ -#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) -/* UDC Byte Count Reg 2 */ -#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) -/* UDC Byte Count Reg 4 */ -#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) -/* UDC Byte Count Reg 7 */ -#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) -/* UDC Byte Count Reg 9 */ -#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) -/* UDC Byte Count Reg 12 */ -#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) -/* UDC Byte Count Reg 14 */ -#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) -/* UDC Endpoint 0 Data Register */ -#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) -/* UDC Endpoint 1 Data Register */ -#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) -/* UDC Endpoint 2 Data Register */ -#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) -/* UDC Endpoint 3 Data Register */ -#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) -/* UDC Endpoint 4 Data Register */ -#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) -/* UDC Endpoint 5 Data Register */ -#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) -/* UDC Endpoint 6 Data Register */ -#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) -/* UDC Endpoint 7 Data Register */ -#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) -/* UDC Endpoint 8 Data Register */ -#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) -/* UDC Endpoint 9 Data Register */ -#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) -/* UDC Endpoint 10 Data Register */ -#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) -/* UDC Endpoint 11 Data Register */ -#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) -/* UDC Endpoint 12 Data Register */ -#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) -/* UDC Endpoint 13 Data Register */ -#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) -/* UDC Endpoint 14 Data Register */ -#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) -/* UDC Endpoint 15 Data Register */ -#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) -/* UDC Interrupt Control Register 0 */ -#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) -/* UDC Interrupt Control Register 1 */ -#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) -/* UDC Status Interrupt Register 0 */ -#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) -/* UDC Status Interrupt Register 1 */ -#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) - -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ /* "fuse" bits of IXP_EXP_CFG2 */ diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot deleted file mode 100644 index f3835c43af61..000000000000 --- a/arch/arm/mach-keystone/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x80008000 diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index c279293f084c..e6b9cb1e6709 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -63,7 +63,7 @@ static void __init keystone_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static phys_addr_t keystone_virt_to_idmap(unsigned long x) +static unsigned long keystone_virt_to_idmap(unsigned long x) { return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; } @@ -100,6 +100,7 @@ static const char *const keystone_match[] __initconst = { "ti,k2hk", "ti,k2e", "ti,k2l", + "ti,k2g", "ti,keystone", NULL, }; diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 1f4f2f4f25bb..478ebd1f2b0f 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -80,7 +80,7 @@ static void __init og_pci_bus_reset(void) #define S8250_VIRT 0xf4000000 #define S8250_SIZE 0x00100000 -static struct __initdata map_desc og_io_desc[] = { +static struct map_desc og_io_desc[] __initdata = { { .virtual = S8250_VIRT, .pfn = __phys_to_pfn(S8250_PHYS), diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c index 474a050da85b..7a1c4caa1ab5 100644 --- a/arch/arm/mach-ks8695/cpu.c +++ b/arch/arm/mach-ks8695/cpu.c @@ -34,7 +34,7 @@ #include <mach/regs-misc.h> -static struct __initdata map_desc ks8695_io_desc[] = { +static struct map_desc ks8695_io_desc[] __initdata = { { .virtual = (unsigned long)KS8695_IO_VA, .pfn = __phys_to_pfn(KS8695_IO_PA), diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h index c089a1aea674..a001c7c34df2 100644 --- a/arch/arm/mach-ks8695/include/mach/uncompress.h +++ b/arch/arm/mach-ks8695/include/mach/uncompress.h @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/regs-uart.h> -static void putc(char c) +static inline void putc(char c) { while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE)) barrier(); diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index f5db805ab958..c70709ada692 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -2,7 +2,6 @@ # Makefile for the linux kernel. # -obj-y := timer.o irq.o common.o serial.o clock.o +obj-y := irq.o common.o serial.o obj-y += pm.o suspend.o obj-y += phy3250.o - diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c deleted file mode 100644 index 661c8f4b2310..000000000000 --- a/arch/arm/mach-lpc32xx/clock.c +++ /dev/null @@ -1,1284 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/clock.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * LPC32xx clock management driver overview - * - * The LPC32XX contains a number of high level system clocks that can be - * generated from different sources. These system clocks are used to - * generate the CPU and bus rates and the individual peripheral clocks in - * the system. When Linux is started by the boot loader, the system - * clocks are already running. Stopping a system clock during normal - * Linux operation should never be attempted, as peripherals that require - * those clocks will quit working (ie, DRAM). - * - * The LPC32xx high level clock tree looks as follows. Clocks marked with - * an asterisk are always on and cannot be disabled. Clocks marked with - * an ampersand can only be disabled in CPU suspend mode. Clocks marked - * with a caret are always on if it is the selected clock for the SYSCLK - * source. The clock that isn't used for SYSCLK can be enabled and - * disabled normally. - * 32KHz oscillator* - * / | \ - * RTC* PLL397^ TOUCH - * / - * Main oscillator^ / - * | \ / - * | SYSCLK& - * | \ - * | \ - * USB_PLL HCLK_PLL& - * | | | - * USB host/device PCLK& | - * | | - * Peripherals - * - * The CPU and chip bus rates are derived from the HCLK PLL, which can - * generate various clock rates up to 266MHz and beyond. The internal bus - * rates (PCLK and HCLK) are generated from dividers based on the HCLK - * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate, - * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high - * level clocks are based on either HCLK or PCLK, but have their own - * dividers as part of the IP itself. Because of this, the system clock - * rates should not be changed. - * - * The HCLK PLL is clocked from SYSCLK, which can be derived from the - * main oscillator or PLL397. PLL397 generates a rate that is 397 times - * the 32KHz oscillator rate. The main oscillator runs at the selected - * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate - * is normally 13MHz, but depends on the selection of external crystals - * or oscillators. If USB operation is required, the main oscillator must - * be used in the system. - * - * Switching SYSCLK between sources during normal Linux operation is not - * supported. SYSCLK is preset in the bootloader. Because of the - * complexities of clock management during clock frequency changes, - * there are some limitations to the clock driver explained below: - * - The PLL397 and main oscillator can be enabled and disabled by the - * clk_enable() and clk_disable() functions unless SYSCLK is based - * on that clock. This allows the other oscillator that isn't driving - * the HCLK PLL to be used as another system clock that can be routed - * to an external pin. - * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with - * this driver. - * - HCLK and PCLK rates cannot be changed as part of this driver. - * - Most peripherals have their own dividers are part of the peripheral - * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates - * will also impact the individual peripheral rates. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "clock.h" -#include "common.h" - -static DEFINE_SPINLOCK(global_clkregs_lock); - -static int usb_pll_enable, usb_pll_valid; - -static struct clk clk_armpll; -static struct clk clk_usbpll; - -/* - * Post divider values for PLLs based on selected register value - */ -static const u32 pll_postdivs[4] = {1, 2, 4, 8}; - -static unsigned long local_return_parent_rate(struct clk *clk) -{ - /* - * If a clock has a rate of 0, then it inherits it's parent - * clock rate - */ - while (clk->rate == 0) - clk = clk->parent; - - return clk->rate; -} - -/* 32KHz clock has a fixed rate and is not stoppable */ -static struct clk osc_32KHz = { - .rate = LPC32XX_CLOCK_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static int local_pll397_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - } else { - /* Enable PLL397 */ - reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - - /* Wait for PLL397 lock */ - while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) - return -ENODEV; - } - - return 0; -} - -static int local_oscmain_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - } else { - /* Enable main oscillator */ - reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - /* Wait for main oscillator to start */ - while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) - return -ENODEV; - } - - return 0; -} - -static struct clk osc_pll397 = { - .parent = &osc_32KHz, - .enable = local_pll397_enable, - .rate = LPC32XX_CLOCK_OSC_FREQ * 397, - .get_rate = local_return_parent_rate, -}; - -static struct clk osc_main = { - .enable = local_oscmain_enable, - .rate = LPC32XX_MAIN_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_sys; - -/* - * Convert a PLL register value to a PLL output frequency - */ -u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval) -{ - struct clk_pll_setup pllcfg; - - pllcfg.cco_bypass_b15 = 0; - pllcfg.direct_output_b14 = 0; - pllcfg.fdbk_div_ctrl_b13 = 0; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0) - pllcfg.cco_bypass_b15 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0) - pllcfg.direct_output_b14 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0) - pllcfg.fdbk_div_ctrl_b13 = 1; - pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF); - pllcfg.pll_n = 1 + ((regval >> 9) & 0x3); - pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)]; - - return clk_check_pll_setup(inputclk, &pllcfg); -} - -/* - * Setup the HCLK PLL with a PLL structure - */ -static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup) -{ - u32 tv, tmp = 0; - - if (PllSetup->analog_on != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP; - if (PllSetup->cco_bypass_b15 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS; - if (PllSetup->direct_output_b14 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS; - if (PllSetup->fdbk_div_ctrl_b13 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK; - - tv = ffs(PllSetup->pll_p) - 1; - if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3)) - return 0; - - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1); - - return tmp; -} - -/* - * Update the ARM core PLL frequency rate variable from the actual PLL setting - */ -static void local_update_armpll_rate(void) -{ - u32 clkin, pllreg; - - clkin = clk_armpll.parent->rate; - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - - clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg); -} - -/* - * Find a PLL configuration for the selected input frequency - */ -static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq, - struct clk_pll_setup *pllsetup) -{ - u32 ifreq, freqtol, m, n, p, fclkout; - - /* Determine frequency tolerance limits */ - freqtol = target_freq / 250; - ifreq = pllin_freq; - - /* Is direct bypass mode possible? */ - if (abs(pllin_freq - target_freq) <= freqtol) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_p = pll_postdivs[0]; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - return clk_check_pll_setup(ifreq, pllsetup); - } else if (target_freq <= ifreq) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - for (p = 0; p <= 3; p++) { - pllsetup->pll_p = pll_postdivs[p]; - fclkout = clk_check_pll_setup(ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - - /* Is direct mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 0; - pllsetup->pll_p = pll_postdivs[0]; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - /* Compute output frequency for this value */ - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup(ifreq, - pllsetup); - if (abs(target_freq - fclkout) <= - freqtol) - return fclkout; - } - } - - /* Is integer mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - /* Try non-integer mode */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 0; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - return 0; -} - -static struct clk clk_armpll = { - .parent = &clk_sys, - .get_rate = local_return_parent_rate, -}; - -/* - * Setup the USB PLL with a PLL structure - */ -static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) -{ - u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF; - reg |= tmp; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - return clk_check_pll_setup(clk_usbpll.parent->rate, - pHCLKPllSetup); -} - -static int local_usbpll_enable(struct clk *clk, int enable) -{ - u32 reg; - int ret = 0; - unsigned long timeout = jiffies + msecs_to_jiffies(20); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1, - LPC32XX_CLKPWR_USB_CTRL); - - if (enable && usb_pll_valid && usb_pll_enable) { - ret = -ENODEV; - /* - * If the PLL rate has been previously set, then the rate - * in the PLL register is valid and can be enabled here. - * Otherwise, it needs to be enabled as part of setrate. - */ - - /* - * Gate clock into PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Enable PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Wait for PLL to lock - */ - while (time_before(jiffies, timeout) && (ret == -ENODEV)) { - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) - ret = 0; - else - udelay(10); - } - - /* - * Gate clock from PLL if PLL is locked - */ - if (ret == 0) { - __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2, - LPC32XX_CLKPWR_USB_CTRL); - } else { - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - } - } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) { - usb_pll_valid = 0; - usb_pll_enable = 0; - } - - return ret; -} - -static unsigned long local_usbpll_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return 0; - - return clk_check_pll_setup(clkin, &pllsetup); -} - -static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -ENODEV; - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk->parent); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return -EINVAL; - - /* - * Disable PLL clocks during PLL change - */ - local_usbpll_enable(clk, 0); - pllsetup.analog_on = 0; - local_clk_usbpll_setup(&pllsetup); - - /* - * Start USB PLL and check PLL status - */ - - usb_pll_valid = 1; - usb_pll_enable = 1; - - ret = local_usbpll_enable(clk, 1); - if (ret >= 0) - clk->rate = clk_check_pll_setup(clkin, &pllsetup); - - return ret; -} - -static struct clk clk_usbpll = { - .parent = &osc_main, - .set_rate = local_usbpll_set_rate, - .enable = local_usbpll_enable, - .rate = 48000, /* In KHz */ - .get_rate = local_return_parent_rate, - .round_rate = local_usbpll_round_rate, -}; - -static u32 clk_get_hclk_div(void) -{ - static const u32 hclkdivs[4] = {1, 2, 4, 4}; - return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW( - __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))]; -} - -static struct clk clk_hclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static int local_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(clk->enable_reg); - - if (enable == 0) - tmp &= ~clk->enable_mask; - else - tmp |= clk->enable_mask; - - __raw_writel(tmp, clk->enable_reg); - - return 0; -} - -/* Peripheral clock sources */ -static struct clk clk_timer0 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer1 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_mpwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_wdt = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_vfp9 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL, - .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_dma = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) | - LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart4 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart5 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart6 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4), - .enable_mask = 0x4, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_kscan = { - .parent = &osc_32KHz, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_SEL_SLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand_mlc = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_DMA_INT | - LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN | - LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_net = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL, - .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN | - LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN | - LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_rtc = { - .parent = &osc_32KHz, - .rate = 1, /* 1 Hz */ - .get_rate = local_return_parent_rate, -}; - -static int local_usb_enable(struct clk *clk, int enable) -{ - u32 tmp; - - if (enable) { - /* Set up I2C pull levels */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); - tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE; - __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); - } - - return local_onoff_enable(clk, enable); -} - -static struct clk clk_usbd = { - .parent = &clk_usbpll, - .enable = local_usb_enable, - .enable_reg = LPC32XX_CLKPWR_USB_CTRL, - .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, - .get_rate = local_return_parent_rate, -}; - -#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \ - LPC32XX_USB_OTG_I2C_CLOCK_ON) - -static int local_usb_otg_enable(struct clk *clk, int enable) -{ - int to = 1000; - - if (enable) { - __raw_writel(clk->enable_mask, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - clk->enable_mask) != clk->enable_mask) && (to > 0)) - to--; - } else { - __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0)) - to--; - } - - if (to) - return 0; - else - return -1; -} - -static struct clk clk_usb_otg_dev = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_DEV_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_usb_otg_host = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_HOST_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static int tsc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - /* Make sure 32KHz clock is the selected clock */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_tsc = { - .parent = &osc_32KHz, - .enable = tsc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int adc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - u32 divider; - - /* Use PERIPH_CLOCK */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - /* - * Set clock divider so that we have equal to or less than - * 4.5MHz clock at ADC - */ - divider = clk->get_rate(clk) / 4500000 + 1; - tmp |= divider; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - /* synchronize rate of this clock w/ actual HW setting */ - clk->rate = clk->get_rate(clk->parent) / divider; - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_adc = { - .parent = &clk_pclk, - .enable = adc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int mmc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS); - - /* If rate is 0, disable clock */ - if (enable != 0) - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; - - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static unsigned long mmc_get_rate(struct clk *clk) -{ - u32 div, rate, oldclk; - - /* The MMC clock must be on when accessing an MMC register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, - LPC32XX_CLKPWR_MS_CTRL); - div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); - - /* Get the parent clock rate */ - rate = clk->parent->get_rate(clk->parent); - - /* Get the MMC controller clock divider value */ - div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - - if (!div) - div = 1; - - return rate / div; -} - -static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long div, prate; - - /* Get the parent clock rate */ - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - return prate; - - div = prate / rate; - if (div > 0xf) - div = 0xf; - - return prate / div; -} - -static int mmc_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp; - unsigned long prate, div, crate = mmc_round_rate(clk, rate); - - prate = clk->parent->get_rate(clk->parent); - - div = prate / crate; - - /* The MMC clock must be on when accessing an MMC register */ - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) | - LPC32XX_CLKPWR_MSCARD_SDCARD_EN; - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static struct clk clk_mmc = { - .parent = &clk_armpll, - .set_rate = mmc_set_rate, - .get_rate = mmc_get_rate, - .round_rate = mmc_round_rate, - .enable = mmc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MS_CTRL, - .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN, -}; - -static unsigned long clcd_get_rate(struct clk *clk) -{ - u32 tmp, div, rate, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - rate = clk->parent->get_rate(clk->parent); - - /* Only supports internal clocking */ - if (tmp & TIM2_BCD) - return rate; - - div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22); - tmp = rate / (2 + div); - - return tmp; -} - -static int clcd_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp, prate, div, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD; - prate = clk->parent->get_rate(clk->parent); - - if (rate < prate) { - /* Find closest divider */ - div = prate / rate; - if (div >= 2) { - div -= 2; - tmp &= ~TIM2_BCD; - } - - tmp &= ~(0xF800001F); - tmp |= (div & 0x1F); - tmp |= (((div >> 5) & 0x1F) << 27); - } - - __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - return 0; -} - -static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate) -{ - u32 prate, div; - - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - rate = prate; - else { - div = prate / rate; - if (div > 0x3ff) - div = 0x3ff; - - rate = prate / div; - } - - return rate; -} - -static struct clk clk_lcd = { - .parent = &clk_hclk, - .set_rate = clcd_set_rate, - .get_rate = clcd_get_rate, - .round_rate = clcd_round_rate, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, -}; - -static void local_clk_disable(struct clk *clk) -{ - /* Don't attempt to disable clock if it has no users */ - if (clk->usecount > 0) { - clk->usecount--; - - /* Only disable clock when it has no more users */ - if ((clk->usecount == 0) && (clk->enable)) - clk->enable(clk, 0); - - /* Check parent clocks, they may need to be disabled too */ - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - /* Enable parent clocks first and update use counts */ - if (clk->parent) - ret = local_clk_enable(clk->parent); - - if (!ret) { - /* Only enable clock if it's currently disabled */ - if ((clk->usecount == 0) && (clk->enable)) - ret = clk->enable(clk, 1); - - if (!ret) - clk->usecount++; - else if (clk->parent) - local_clk_disable(clk->parent); - } - - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - */ -int clk_enable(struct clk *clk) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - ret = local_clk_enable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - local_clk_disable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/* - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(clk); -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * clk_set_rate - set the clock rate for a clock source - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - /* - * Most system clocks can only be enabled or disabled, with - * the actual rate set as part of the peripheral dividers - * instead of high level clock control - */ - if (clk->set_rate) - ret = clk->set_rate(clk, rate); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * clk_round_rate - adjust a rate to the exact rate a clock can provide - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk->round_rate) - rate = clk->round_rate(clk, rate); - else - rate = clk->get_rate(clk); - - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -/* - * clk_set_parent - set the parent clock source for this clock - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - /* Clock re-parenting is not supported */ - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); - -/* - * clk_get_parent - get the parent clock source for this clock - */ -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static struct clk_lookup lookups[] = { - CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz), - CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397), - CLKDEV_INIT(NULL, "osc_main", &osc_main), - CLKDEV_INIT(NULL, "sys_ck", &clk_sys), - CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll), - CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll), - CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk), - CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk), - CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0), - CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1), - CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2), - CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3), - CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), - CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), - CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), - CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), - CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), - CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), - CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), - CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), - CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6), - CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0), - CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1), - CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), - CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), - CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), - CLKDEV_INIT("40050000.key", NULL, &clk_kscan), - CLKDEV_INIT("20020000.flash", NULL, &clk_nand), - CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc), - CLKDEV_INIT("40048000.adc", NULL, &clk_adc), - CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), - CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), - CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc), - CLKDEV_INIT("20098000.sd", NULL, &clk_mmc), - CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), - CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), - CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev), - CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host), - CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), -}; - -static int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - /* - * Setup muxed SYSCLK for HCLK PLL base -this selects the - * parent clock used for the ARM PLL and is used to derive - * the many system clock rates in the device. - */ - if (clk_is_sysclk_mainosc() != 0) - clk_sys.parent = &osc_main; - else - clk_sys.parent = &osc_pll397; - - clk_sys.rate = clk_sys.parent->rate; - - /* Compute the current ARM PLL and USB PLL frequencies */ - local_update_armpll_rate(); - - /* Compute HCLK and PCLK bus rates */ - clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div(); - clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div(); - - /* - * Enable system clocks - this step is somewhat formal, as the - * clocks are already running, but it does get the clock data - * inline with the actual system state. Never disable these - * clocks as they will only stop if the system is going to sleep. - * In that case, the chip/system power management functions will - * handle clock gating. - */ - if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk)) - printk(KERN_ERR "Error enabling system HCLK and PCLK\n"); - - /* - * Timers 0 and 1 were enabled and are being used by the high - * resolution tick function prior to this driver being initialized. - * Tag them now as used. - */ - if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1)) - printk(KERN_ERR "Error enabling timer tick clocks\n"); - - return 0; -} -core_initcall(clk_init); - diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 716e83eb1db8..5b7a1e78c3a5 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -194,21 +194,6 @@ void __init lpc32xx_map_io(void) iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc)); } -void lpc23xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* Make sure WDT clocks are enabled */ - __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - LPC32XX_CLKPWR_TIMER_CLK_CTRL); - - /* Instant assert of RESETOUT_N with pulse length 1mS */ - __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); - __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); - - /* Wait for watchdog to reset system */ - while (1) - ; -} - static int __init lpc32xx_check_uid(void) { u32 uid[4]; diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 1cd8853b2f9b..2d90801ed1e1 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -30,7 +30,6 @@ extern void lpc32xx_timer_init(void); extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); -extern void lpc23xx_restart(enum reboot_mode, const char *); /* diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 77d6b1bab278..b2f9e226febe 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -36,7 +36,6 @@ #include <linux/clk.h> #include <linux/mtd/lpc32xx_slc.h> #include <linux/mtd/lpc32xx_mlc.h> -#include <linux/platform_data/gpio-lpc32xx.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -48,13 +47,6 @@ #include "common.h" /* - * Mapped GPIOLIB GPIOs - */ -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) -#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) - -/* * AMBA LCD controller */ static struct clcd_panel conn_lcd_panel = { @@ -86,8 +78,8 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) { dma_addr_t dma; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, - PANEL_SIZE, &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -97,59 +89,25 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) fb->fb.fix.smem_len = PANEL_SIZE; fb->panel = &conn_lcd_panel; - if (gpio_request(LCD_POWER_GPIO, "LCD power")) - printk(KERN_ERR "Error requesting gpio %u", - LCD_POWER_GPIO); - else if (gpio_direction_output(LCD_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - LCD_POWER_GPIO); - - if (gpio_request(BKL_POWER_GPIO, "LCD backlight power")) - printk(KERN_ERR "Error requesting gpio %u", - BKL_POWER_GPIO); - else if (gpio_direction_output(BKL_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - BKL_POWER_GPIO); - return 0; } static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } static void lpc32xx_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); -} - -/* - * On some early LCD modules (1307.0), the backlight logic is inverted. - * For those board variants, swap the disable and enable states for - * BKL_POWER_GPIO. -*/ -static void clcd_disable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 0); - gpio_set_value(LCD_POWER_GPIO, 0); -} - -static void clcd_enable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 1); - gpio_set_value(LCD_POWER_GPIO, 1); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } static struct clcd_board lpc32xx_clcd_data = { .name = "Phytec LCD", .check = clcdfb_check, .decode = clcdfb_decode, - .disable = clcd_disable, - .enable = clcd_enable, .setup = lpc32xx_clcd_setup, .mmap = lpc32xx_clcd_mmap, .remove = lpc32xx_clcd_remove, @@ -188,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; -static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) -{ - /* Only on and off are supported */ - if (ios->power_mode == MMC_POWER_OFF) - gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); - else - gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); - return 0; -} - static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, - .ios_handler = mmc_handle_ios, }; static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { @@ -260,8 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, - .init_time = lpc32xx_timer_init, .init_machine = lpc3250_machine_init, .dt_compat = lpc32xx_dt_compat, - .restart = lpc23xx_restart, MACHINE_END diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 05621a29fba2..1931229a1eaa 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void) unsigned int puart; int i, j; - /* UART clocks are off, let clock driver manage them */ - __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL); - for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { clk = clk_get(NULL, uartinit_data[i].uart_ck_name); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c deleted file mode 100644 index ff3499d1fb1a..000000000000 --- a/arch/arm/mach-lpc32xx/timer.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/timer.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2009 - 2010 NXP Semiconductors - * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven - * Ed Schouten <e.schouten@fontys.nl> - * Laurens Timmermans <l.timmermans@fontys.nl> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/err.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "common.h" - -static int lpc32xx_clkevt_next_event(unsigned long delta, - struct clock_event_device *dev) -{ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - - return 0; -} - -static int lpc32xx_shutdown(struct clock_event_device *evt) -{ - /* - * Disable the timer. When using oneshot, we must also - * disable the timer to wait for the first call to - * set_next_event(). - */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - return 0; -} - -static struct clock_event_device lpc32xx_clkevt = { - .name = "lpc32xx_clkevt", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = lpc32xx_clkevt_next_event, - .set_state_shutdown = lpc32xx_shutdown, - .set_state_oneshot = lpc32xx_shutdown, -}; - -static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &lpc32xx_clkevt; - - /* Clear match */ - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction lpc32xx_timer_irq = { - .name = "LPC32XX Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = lpc32xx_timer_interrupt, -}; - -/* - * The clock management driver isn't initialized at this point, so the - * clocks need to be enabled here manually and then tagged as used in - * the clock driver initialization - */ -void __init lpc32xx_timer_init(void) -{ - u32 clkrate, pllreg; - - /* Enable timer clock */ - __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN | - LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1); - - /* - * The clock driver isn't initialized at this point. So determine if - * the SYSCLK is driven from the PLL397 or main oscillator and then use - * it to compute the PLL frequency and the PCLK divider to get the base - * timer rates. This rate is needed to compute the tick rate. - */ - if (clk_is_sysclk_mainosc() != 0) - clkrate = LPC32XX_MAIN_OSC_FREQ; - else - clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ; - - /* Get ARM HCLKPLL register and convert it into a frequency */ - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - clkrate = clk_get_pllrate_from_reg(clkrate, pllreg); - - /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */ - clkrate = clkrate / clk_get_pclk_div(); - - /* Initial timer setup */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | - LPC32XX_TIMER_CNTR_MCR_STOP(0) | - LPC32XX_TIMER_CNTR_MCR_RESET(0), - LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); - - /* Setup tick interrupt */ - setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); - - /* Setup the clockevent structure. */ - lpc32xx_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1); - - /* Use timer1 as clock source. */ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), - "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); -} diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 0abcc51afff5..8ced4ad94af0 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -18,6 +18,10 @@ config MACH_MT6592 bool "MediaTek MT6592 SoCs support" default ARCH_MEDIATEK +config MACH_MT7623 + bool "MediaTek MT7623 SoCs support" + default ARCH_MEDIATEK + config MACH_MT8127 bool "MediaTek MT8127 SoCs support" default ARCH_MEDIATEK diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 2f9f09ac51bd..9c2e38d30f47 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -47,6 +47,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt2701", "mediatek,mt6589", "mediatek,mt6592", + "mediatek,mt7623", "mediatek,mt8127", "mediatek,mt8135", NULL, diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index a1b07eeaaf5b..b821e34474b6 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -44,13 +44,21 @@ static const struct mtk_smp_boot_info mtk_mt6589_boot = { { 0x38, 0x3c, 0x40 }, }; +static const struct mtk_smp_boot_info mtk_mt7623_boot = { + 0x10202000, 0x34, + { 0x534c4131, 0x4c415332, 0x41534c33 }, + { 0x38, 0x3c, 0x40 }, +}; + static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot }, { .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot }, + { .compatible = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot }, }; static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, + { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, }; static void __iomem *mtk_smp_base; diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot deleted file mode 100644 index 5edf03e2beed..000000000000 --- a/arch/arm/mach-mmp/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ - zreladdr-y += 0x00008000 diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index a32575fa3fba..c32f85559c65 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MV78XX0 - bool "Marvell MV78xx0" if ARCH_MULTI_V5 + bool "Marvell MV78xx0" + depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select MVEBU_MBUS diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-mv78xx0/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a1a04df9c05c..99cc93900a24 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -405,9 +405,8 @@ void __init mv78xx0_init(void) printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); -#ifdef CONFIG_CACHE_FEROCEON_L2 - feroceon_l2_init(is_l2_writethrough()); -#endif + if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) + feroceon_l2_init(is_l2_writethrough()); /* Setup root of clk tree */ clk_init(); diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 71e97daeae70..348044ea650c 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_MVEBU depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select GENERIC_IRQ_CHIP select PINCTRL select PLAT_ORION select SOC_BUS @@ -29,6 +28,7 @@ config MACH_ARMADA_370 bool "Marvell Armada 370 boards" depends on ARCH_MULTI_V7 select ARMADA_370_CLK + select ARMADA_370_XP_IRQ select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_370 @@ -40,6 +40,7 @@ config MACH_ARMADA_370 config MACH_ARMADA_375 bool "Marvell Armada 375 boards" depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC @@ -60,6 +61,7 @@ config MACH_ARMADA_38X select ARM_ERRATA_720789 select ARM_ERRATA_753970 select ARM_GIC + select ARMADA_370_XP_IRQ select ARMADA_38X_CLK select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP @@ -75,6 +77,7 @@ config MACH_ARMADA_39X bool "Marvell Armada 39x boards" depends on ARCH_MULTI_V7 select ARM_GIC + select ARMADA_370_XP_IRQ select ARMADA_39X_CLK select CACHE_L2X0 select HAVE_ARM_SCU @@ -89,6 +92,7 @@ config MACH_ARMADA_39X config MACH_ARMADA_XP bool "Marvell Armada XP boards" depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ select ARMADA_XP_CLK select CPU_PJ4B select MACH_MVEBU_V7 diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 55348ee5a352..7e989d61159c 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -107,7 +107,7 @@ static struct notifier_block mvebu_hwcc_nb = { .notifier_call = mvebu_hwcc_notifier, }; -static struct notifier_block mvebu_hwcc_pci_nb = { +static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = { .notifier_call = mvebu_hwcc_notifier, }; diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index f9597b701028..46c742d3bd41 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -140,6 +140,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) panic("Cannot find 'marvell,bootrom' compatible node"); err = of_address_to_resource(node, 0, &res); + of_node_put(node); if (err < 0) panic("Cannot get 'bootrom' node address"); diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index 3d90ef19be2b..2da8e5dfcf24 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -3,20 +3,17 @@ menu "NetX Implementations" config MACH_NXDKN bool "Enable Hilscher nxdkn Eval Board support" - depends on ARCH_NETX help Board support for the Hilscher NetX Eval Board config MACH_NXDB500 bool "Enable Hilscher nxdb500 Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxdb500 Eval Board config MACH_NXEB500HMI bool "Enable Hilscher nxeb500hmi Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxeb500hmi Eval Board diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index d122ee6ab991..8814ee5e98fd 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -42,8 +42,8 @@ int netx_clcd_setup(struct clcd_fb *fb) fb->panel = netx_panel; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024, - &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -57,16 +57,14 @@ int netx_clcd_setup(struct clcd_fb *fb) int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void netx_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h index 5cb1051b5831..033875dbc32b 100644 --- a/arch/arm/mach-netx/include/mach/uncompress.h +++ b/arch/arm/mach-netx/include/mach/uncompress.h @@ -40,7 +40,7 @@ #define FR_BUSY (1<<3) #define FR_TXFF (1<<5) -static void putc(char c) +static inline void putc(char c) { unsigned long base; diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-nspire/Makefile.boot +++ /dev/null diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c index abea12617b17..ea0e5b2ca1cd 100644 --- a/arch/arm/mach-nspire/clcd.c +++ b/arch/arm/mach-nspire/clcd.c @@ -90,8 +90,8 @@ int nspire_clcd_setup(struct clcd_fb *fb) panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8; panel_size = ALIGN(panel_size, PAGE_SIZE); - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, - panel_size, &dma, GFP_KERNEL); + fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma, + GFP_KERNEL); if (!fb->fb.screen_base) { pr_err("CLCD: unable to map framebuffer\n"); @@ -107,13 +107,12 @@ int nspire_clcd_setup(struct clcd_fb *fb) int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, fb->fb.fix.smem_start, - fb->fb.fix.smem_len); + return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void nspire_clcd_remove(struct clcd_fb *fb) { - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, + fb->fb.fix.smem_start); } diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 7b02ed218a42..f6ba589cd312 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/omap-dma.h> #include <mach/tc.h> @@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = { .num_res = 1, }; +/* OMAP730, OMAP850 */ +static const struct dma_slave_map omap7xx_sdma_map[] = { + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) }, + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, +}; + +/* OMAP1510, OMAP1610*/ +static const struct dma_slave_map omap1xxx_sdma_map[] = { + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) }, + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, + { "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) }, + { "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) }, +}; + static struct omap_system_dma_plat_info dma_plat_info __initdata = { .reg_map = reg_map, .channel_stride = 0x40, @@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void) p.dma_attr = d; p.errata = configure_dma_errata(); + if (cpu_is_omap7xx()) { + p.slave_map = omap7xx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map); + } else { + p.slave_map = omap1xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map); + } + ret = platform_device_add_data(pdev, &p, sizeof(p)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 4869633de8cd..9cca6a56788f 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -45,7 +45,7 @@ static void set_omap_uart_info(unsigned char port) *uart_info = port; } -static void putc(int c) +static inline void putc(int c) { if (!uart_base) return; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot deleted file mode 100644 index b03e562acc60..000000000000 --- a/arch/arm/mach-omap2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 809827265fb3..bab814d2f37d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -18,6 +18,7 @@ #include <asm/setup.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include "common.h" @@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = { NULL, }; +/* Set system_rev from atags */ +static void __init rx51_set_system_rev(const struct tag *tags) +{ + const struct tag *tag; + + if (tags->hdr.tag != ATAG_CORE) + return; + + for_each_tag(tag, tags) { + if (tag->hdr.tag == ATAG_REVISION) { + system_rev = tag->u.revision.rev; + break; + } + } +} + /* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags, * save them while the data is still not overwritten */ static void __init rx51_reserve(void) { - save_atags((const struct tag *)(PAGE_OFFSET + 0x100)); + const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100); + + save_atags(tags); + rx51_set_system_rev(tags); omap_reserve(); } diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index cf5855174c93..1662071bb2cc 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -36,7 +36,6 @@ static void __iomem *omap2_ctrl_base; static s16 omap2_ctrl_offset; -static struct regmap *omap2_ctrl_syscon; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { @@ -166,16 +165,9 @@ u16 omap_ctrl_readw(u16 offset) u32 omap_ctrl_readl(u16 offset) { - u32 val; - offset &= 0xfffc; - if (!omap2_ctrl_syscon) - val = readl_relaxed(omap2_ctrl_base + offset); - else - regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset, - &val); - return val; + return readl_relaxed(omap2_ctrl_base + offset); } void omap_ctrl_writeb(u8 val, u16 offset) @@ -207,11 +199,7 @@ void omap_ctrl_writew(u16 val, u16 offset) void omap_ctrl_writel(u32 val, u16 offset) { offset &= 0xfffc; - if (!omap2_ctrl_syscon) - writel_relaxed(val, omap2_ctrl_base + offset); - else - regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset, - val); + writel_relaxed(val, omap2_ctrl_base + offset); } #ifdef CONFIG_ARCH_OMAP3 @@ -715,8 +703,6 @@ int __init omap_control_init(void) if (IS_ERR(syscon)) return PTR_ERR(syscon); - omap2_ctrl_syscon = syscon; - if (of_get_child_by_name(scm_conf, "clocks")) { ret = omap2_clk_provider_init(scm_conf, data->index, @@ -724,9 +710,6 @@ int __init omap_control_init(void) if (ret) return ret; } - - iounmap(omap2_ctrl_base); - omap2_ctrl_base = NULL; } else { /* No scm_conf found, direct access */ ret = omap2_clk_provider_init(np, data->index, NULL, diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index aa7b379e2661..2a3db0bd9e15 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -34,6 +34,7 @@ #include "pm.h" #include "control.h" #include "common.h" +#include "soc.h" /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { @@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = { .safe_state_index = 0, }; +/* + * Numbers based on measurements made in October 2009 for PM optimized kernel + * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP, + * and worst case latencies). + */ +static struct cpuidle_driver omap3430_idle_driver = { + .name = "omap3430_idle", + .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle_bm, + .exit_latency = 110 + 162, + .target_residency = 5, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 106 + 180, + .target_residency = 309, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 107 + 410, + .target_residency = 46057, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 121 + 3374, + .target_residency = 46057, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 855 + 1146, + .target_residency = 46057, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7580 + 4134, + .target_residency = 484329, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7505 + 15274, + .target_residency = 484329, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, +}; + /* Public functions */ /** @@ -333,5 +397,8 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - return cpuidle_register(&omap3_idle_driver, NULL); + if (cpu_is_omap3430()) + return cpuidle_register(&omap3430_idle_driver, NULL); + else + return cpuidle_register(&omap3_idle_driver, NULL); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9cda974a3009..d7f1d69daf6d 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -66,32 +65,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) -static inline void __init omap_init_mbox(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct omap_mbox_pdata *pdata; - - oh = omap_hwmod_lookup("mailbox"); - if (!oh) { - pr_err("%s: unable to find hwmod\n", __func__); - return; - } - if (!oh->dev_attr) { - pr_err("%s: hwmod doesn't have valid attrs\n", __func__); - return; - } - - pdata = (struct omap_mbox_pdata *)oh->dev_attr; - pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(pdev)); -} -#else -static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP2PLUS_MBOX */ - static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) @@ -229,7 +202,6 @@ static int __init omap2_init_devices(void) * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); omap_init_aes(); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 1ed4be184a29..e58c13a9bea5 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/of.h> #include <linux/omap-dma.h> @@ -203,6 +204,108 @@ static unsigned configure_dma_errata(void) return errata; } +static const struct dma_slave_map omap24xx_sdma_map[] = { + { "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) }, + { "omap-aes", "tx", SDMA_FILTER_PARAM(9) }, + { "omap-aes", "rx", SDMA_FILTER_PARAM(10) }, + { "omap-sham", "rx", SDMA_FILTER_PARAM(13) }, + { "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) }, + { "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) }, + { "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) }, + { "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) }, + { "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) }, + { "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) }, + { "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) }, + { "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) }, + { "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) }, + { "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) }, + { "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) }, + { "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) }, + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) }, + { "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) }, + { "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) }, + { "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) }, + { "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) }, + { "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) }, + { "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) }, + { "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) }, + { "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) }, + { "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) }, + { "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) }, + { "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) }, + { "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) }, + { "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) }, + { "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) }, + { "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) }, + { "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) }, + { "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) }, + { "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) }, + { "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) }, + { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, + { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, + { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, +}; + +static const struct dma_slave_map omap3xxx_sdma_map[] = { + { "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) }, + { "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) }, + { "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) }, + { "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) }, + { "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) }, + { "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) }, + { "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) }, + { "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) }, + { "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) }, + { "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) }, + { "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) }, + { "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) }, + { "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) }, + { "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) }, + { "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) }, + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) }, + { "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) }, + { "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) }, + { "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) }, + { "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) }, + { "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) }, + { "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) }, + { "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) }, + { "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) }, + { "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) }, + { "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) }, + { "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) }, + { "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) }, + { "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) }, + { "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) }, + { "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) }, + { "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) }, + { "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) }, + { "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) }, + { "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) }, + { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, + { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, + { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, + { "omap-aes", "tx", SDMA_FILTER_PARAM(65) }, + { "omap-aes", "rx", SDMA_FILTER_PARAM(66) }, + { "omap-sham", "rx", SDMA_FILTER_PARAM(69) }, + { "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) }, + { "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) }, + { "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) }, + { "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) }, + { "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) }, + { "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) }, +}; + static struct omap_system_dma_plat_info dma_plat_info __initdata = { .reg_map = reg_map, .channel_stride = 0x60, @@ -231,6 +334,20 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr; p.errata = configure_dma_errata(); + if (!of_have_populated_dt()) { + if (soc_is_omap24xx()) { + p.slave_map = omap24xx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map); + } else if (soc_is_omap34xx() || soc_is_omap3630()) { + p.slave_map = omap3xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map); + } else { + pr_err("%s: The legacy DMA map is not provided!\n", + __func__); + return -ENODEV; + } + } + pdev = omap_device_build(name, 0, oh, &p, sizeof(p)); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 7b76ce01c21d..8633c703546a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base) static void set_onenand_cfg(void __iomem *onenand_base) { - u32 reg; + u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; if (onenand_flags & ONENAND_FLAG_SYNCREAD) @@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } @@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) } } + onenand_async.sync_write = true; omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 0437537751bc..f7ff3b9dad87 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; + int err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: if (pdev->archdata.od) omap_device_delete(pdev->archdata.od); break; + case BUS_NOTIFY_UNBOUND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) { + dev_info(dev, "enabled after unload, idling\n"); + err = omap_device_idle(pdev); + if (err) + dev_err(dev, "failed to idle\n"); + } + break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); @@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev) int ret; ret = omap_device_enable(pdev); - if (ret) + if (ret) { + dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n"); return ret; + } return pm_generic_runtime_resume(dev); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e9f65fec55c0..b6d62e4cdfdd 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { + if (oh->flags & HWMOD_NO_IDLE) { + oh->_int_flags |= _HWMOD_SKIP_ENABLE; + return 0; + } + pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + if (of_find_property(np, "ti,no-idle", NULL)) + oh->flags |= HWMOD_NO_IDLE; } oh->_state = _HWMOD_STATE_INITIALIZED; @@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh) * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - * it should be set by the core code as a runtime flag during startup */ - if ((oh->flags & HWMOD_INIT_NO_IDLE) && + if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) && (postsetup_state == _HWMOD_STATE_IDLE)) { oh->_int_flags |= _HWMOD_SKIP_ENABLE; postsetup_state = _HWMOD_STATE_ENABLED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 76bce11c85a4..7c7a31169475 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm { * or idled. * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to * operate and they need to be handled at the same time as the main_clk. + * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain + * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) #define HWMOD_OPT_CLKS_NEEDED (1 << 14) +#define HWMOD_NO_IDLE (1 << 15) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0a985325cd64..9869a75c5d96 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3583,14 +3583,14 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_class omap34xx_ssi_hwmod_class = { +static struct omap_hwmod_class omap3xxx_ssi_hwmod_class = { .name = "ssi", .sysc = &omap34xx_ssi_sysc, }; -static struct omap_hwmod omap34xx_ssi_hwmod = { +static struct omap_hwmod omap3xxx_ssi_hwmod = { .name = "ssi", - .class = &omap34xx_ssi_hwmod_class, + .class = &omap3xxx_ssi_hwmod_class, .clkdm_name = "core_l4_clkdm", .main_clk = "ssi_ssr_fck", .prcm = { @@ -3605,9 +3605,9 @@ static struct omap_hwmod omap34xx_ssi_hwmod = { }; /* L4 CORE -> SSI */ -static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = { +static struct omap_hwmod_ocp_if omap3xxx_l4_core__ssi = { .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_ssi_hwmod, + .slave = &omap3xxx_ssi_hwmod, .clk = "ssi_ick", .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3760,7 +3760,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_sad2d__l3, &omap3xxx_l4_core__mmu_isp, &omap3xxx_l3_main__mmu_iva, - &omap34xx_l4_core__ssi, + &omap3xxx_l4_core__ssi, NULL }; @@ -3784,6 +3784,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_sad2d__l3, &omap3xxx_l4_core__mmu_isp, &omap3xxx_l3_main__mmu_iva, + &omap3xxx_l4_core__ssi, NULL }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index e97a894b5f88..97fd399202dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -1020,9 +1020,21 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = { + &am33xx_l4_wkup__rtc, + NULL, +}; + int __init am43xx_hwmod_init(void) { + int ret; + omap_hwmod_am43xx_reg(); omap_hwmod_init(); - return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); + + if (!ret && of_machine_is_compatible("ti,am4372")) + ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 848356e38b74..9442d89bd229 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -430,6 +430,67 @@ static struct omap_hwmod dra7xx_dma_system_hwmod = { }; /* + * 'tpcc' class + * + */ +static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = { + .name = "tpcc", +}; + +static struct omap_hwmod dra7xx_tpcc_hwmod = { + .name = "tpcc", + .class = &dra7xx_tpcc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'tptc' class + * + */ +static struct omap_hwmod_class dra7xx_tptc_hwmod_class = { + .name = "tptc", +}; + +/* tptc0 */ +static struct omap_hwmod dra7xx_tptc0_hwmod = { + .name = "tptc0", + .class = &dra7xx_tptc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* tptc1 */ +static struct omap_hwmod dra7xx_tptc1_hwmod = { + .name = "tptc1", + .class = &dra7xx_tptc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'dss' class * */ @@ -1482,8 +1543,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -1527,19 +1587,49 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ +/* + * As noted in documentation for _reset() in omap_hwmod.c, the stock reset + * functionality of OMAP HWMOD layer does not deassert the hardreset lines + * associated with an IP automatically leaving the driver to handle that + * by itself. This does not work for PCIeSS which needs the reset lines + * deasserted for the driver to start accessing registers. + * + * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset + * lines after asserting them. + */ +static int dra7xx_pciess_reset(struct omap_hwmod *oh) +{ + int i; + + for (i = 0; i < oh->rst_lines_cnt; i++) { + omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name); + omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name); + } + + return 0; +} + static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", + .reset = dra7xx_pciess_reset, }; /* pcie1 */ +static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = { + { .name = "pcie", .rst_shift = 0 }, +}; + static struct omap_hwmod dra7xx_pciess1_hwmod = { .name = "pcie1", .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", + .rst_lines = dra7xx_pciess1_resets, + .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess1_resets), .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, + .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, @@ -1547,14 +1637,22 @@ static struct omap_hwmod dra7xx_pciess1_hwmod = { }; /* pcie2 */ +static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = { + { .name = "pcie", .rst_shift = 1 }, +}; + +/* pcie2 */ static struct omap_hwmod dra7xx_pciess2_hwmod = { .name = "pcie2", .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", + .rst_lines = dra7xx_pciess2_resets, + .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess2_resets), .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET, + .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, }, @@ -2549,6 +2647,30 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3_main_1 -> tpcc */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tpcc_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> tptc0 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tptc0_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> tptc1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tptc1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = { { .name = "family", @@ -3366,6 +3488,9 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__mcasp3, &dra7xx_gmac__mdio, &dra7xx_l4_cfg__dma_system, + &dra7xx_l3_main_1__tpcc, + &dra7xx_l3_main_1__tptc0, + &dra7xx_l3_main_1__tptc1, &dra7xx_l3_main_1__dss, &dra7xx_l3_main_1__dispc, &dra7xx_l3_main_1__hdmi, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index e493ae372910..39736ad2a754 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -228,6 +228,42 @@ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = { .user = OCP_USER_MPU, }; +/* RTC */ +static struct omap_hwmod_class_sysconfig ti81xx_rtc_sysc = { + .rev_offs = 0x74, + .sysc_offs = 0x78, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | + SIDLE_SMART | SIDLE_SMART_WKUP, + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class ti81xx_rtc_hwmod_class = { + .name = "rtc", + .sysc = &ti81xx_rtc_sysc, +}; + +struct omap_hwmod ti81xx_rtc_hwmod = { + .name = "rtc", + .class = &ti81xx_rtc_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .flags = HWMOD_NO_IDLEST, + .main_clk = "sysclk18_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_RTC_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if ti81xx_l4_ls__rtc = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &ti81xx_rtc_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + /* UART common */ static struct omap_hwmod_class_sysconfig uart_sysc = { .rev_offs = 0x50, @@ -429,6 +465,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_elm_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -478,6 +515,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio1_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -504,6 +542,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio2_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -628,7 +667,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer1_hwmod, - .clk = "timer1_fck", + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -665,7 +704,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = { static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm814x_timer2_hwmod, - .clk = "timer2_fck", + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1123,6 +1162,7 @@ static struct omap_hwmod dm81xx_mailbox_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_mailbox_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1157,6 +1197,7 @@ static struct omap_hwmod dm81xx_spinbox_hwmod = { static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_spinbox_hwmod, + .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -1376,6 +1417,7 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__mcspi1, &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, + &ti81xx_l4_ls__rtc, &dm81xx_alwon_l3_fast__tpcc, &dm81xx_alwon_l3_fast__tptc0, &dm81xx_alwon_l3_fast__tptc1, @@ -1415,6 +1457,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__gpio1, &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm, + &ti81xx_l4_ls__rtc, &dm816x_l4_ls__mmc1, &dm816x_l4_ls__timer1, &dm816x_l4_ls__timer2, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e781e4fae13a..a935d28443da 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> #include <linux/platform_data/wkup_m3.h> +#include <linux/platform_data/pwm_omap_dmtimer.h> +#include <plat/dmtimer.h> #include "common.h" #include "common-board-devices.h" @@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h index cc1e6a2b97f6..294deed956f3 100644 --- a/arch/arm/mach-omap2/prm7xx.h +++ b/arch/arm/mach-omap2/prm7xx.h @@ -360,6 +360,7 @@ /* PRM.L3INIT_PRM register offsets */ #define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000 #define DRA7XX_PM_L3INIT_PWRSTST_OFFSET 0x0004 +#define DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET 0x0010 #define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028 #define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c #define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f164c6b32ce2..8e072de89fed 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, info = omap_serial_default_info; oh = uart->oh; - name = DRIVER_NAME; + name = OMAP_SERIAL_DRIVER_NAME; omap_up.dma_enabled = info->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index eafd120b53f1..1b9f0520dea9 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r2, l2dis_3630 @ may be too distant for plain adr - str r1, [r2] + adrl r3, l2dis_3630_offset @ may be too distant for plain adr + ldr r2, [r3] @ value for offset + str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) - .text -/* Function to call rom code to save secure ram context */ +/* + * Function to call rom code to save secure ram context. This gets + * relocated to SRAM, so it can be all in .data section. Otherwise + * we need to initialize api_params separately. + */ + .data .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack @@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context + .text + /* * ====================== * == Idle entry point == @@ -289,12 +296,6 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -302,11 +303,7 @@ is_dll_in_lock_mode: tst r5, #0x4 bne exit_nonoff_modes @ Return if locked /* wait till dll locks */ - adr r7, kick_counter wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -330,9 +327,6 @@ kick_dll: orr r6, r6, #(1<<3) @ enable dll str r6, [r4] dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter b wait_dll_lock_timed exit_nonoff_modes: @@ -360,15 +354,6 @@ sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 - ENTRY(omap3_do_wfi_sz) .word . - omap3_do_wfi @@ -437,7 +422,9 @@ ENTRY(omap3_restore) cmp r2, #0x0 @ Check if target power state was OFF or RET bne logic_l1_restore - ldr r0, l2dis_3630 + adr r1, l2dis_3630_offset @ address for offset + ldr r0, [r1] @ value for offset + ldr r0, [r1, r0] @ value at l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 @@ -449,12 +436,14 @@ skipl2dis: and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp + adr r0, l2_inv_api_params_offset + ldr r3, [r0] + add r3, r3, r0 @ r3 points to dummy parameters mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, l2_inv_api_params @ r3 points to dummy parameters dsb @ data write barrier dmb @ data memory barrier smc #1 @ call SMI monitor (smi #1) @@ -488,8 +477,8 @@ skipl2dis: b logic_l1_restore .align -l2_inv_api_params: - .word 0x1, 0x00 +l2_inv_api_params_offset: + .long l2_inv_api_params - . l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 @@ -506,7 +495,9 @@ l2_inv_gp: mov r12, #0x2 smc #0 @ Call SMI monitor (smieq) logic_l1_restore: - ldr r1, l2dis_3630 + adr r0, l2dis_3630_offset @ adress for offset + ldr r1, [r0] @ value for offset + ldr r1, [r0, r1] @ value at l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 bne skipl2reen mrc p15, 0, r1, c1, c0, 1 @@ -535,9 +526,17 @@ control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL +l2dis_3630_offset: + .long l2dis_3630 - . + + .data l2dis_3630: .word 0 + .data +l2_inv_api_params: + .word 0x1, 0x00 + /* * Internal functions */ diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9b09d85d811a..c7a3b4aab4b5 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -29,12 +29,6 @@ dsb .endm -ppa_zero_params: - .word 0x0 - -ppa_por_params: - .word 1, 0 - #ifdef CONFIG_ARCH_OMAP4 /* @@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume) beq skip_ns_smp_enable ppa_actrl_retry: mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX - adr r3, ppa_zero_params @ Pointer to parameters + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag mov r6, #0xff @@ -303,7 +299,9 @@ skip_ns_smp_enable: ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] - adr r3, ppa_por_params + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag @@ -328,6 +326,8 @@ skip_l2en: #endif b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . ENDPROC(omap4_cpu_resume) #endif /* CONFIG_ARCH_OMAP4 */ @@ -380,4 +380,13 @@ ENTRY(omap_do_wfi) nop ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . ENDPROC(omap_do_wfi) + + .data +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 79ca3c3eb2af..70df8f6cddcc 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -181,6 +181,14 @@ static inline int is_ti ##class (void) \ return (GET_TI_CLASS == (id)) ? 1 : 0; \ } +#define GET_DRA_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_DRA_CLASS(class, id) \ +static inline int is_dra ##class (void) \ +{ \ + return (GET_DRA_CLASS == (id)) ? 1 : 0; \ +} + #define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) #define IS_OMAP_SUBCLASS(subclass, id) \ @@ -201,6 +209,12 @@ static inline int is_am ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define IS_DRA_SUBCLASS(subclass, id) \ +static inline int is_dra ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) @@ -210,6 +224,7 @@ IS_AM_CLASS(33xx, 0x33) IS_AM_CLASS(43xx, 0x43) IS_TI_CLASS(81xx, 0x81) +IS_DRA_CLASS(7xx, 0x7) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) @@ -224,6 +239,8 @@ IS_TI_SUBCLASS(816x, 0x816) IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) +IS_DRA_SUBCLASS(75x, 0x75) +IS_DRA_SUBCLASS(72x, 0x72) #define soc_is_omap24xx() 0 #define soc_is_omap242x() 0 @@ -397,9 +414,9 @@ IS_OMAP_TYPE(3430, 0x3430) #undef soc_is_dra7xx #undef soc_is_dra74x #undef soc_is_dra72x -#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) -#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) -#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) +#define soc_is_dra7xx() is_dra7xx() +#define soc_is_dra74x() is_dra75x() +#define soc_is_dra72x() is_dra72x() #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a9ad95f000a1..a2af15822fcb 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -28,14 +28,14 @@ config ARCH_ORION5X_DT config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-2 (88F5281) Development Board config MACH_RD88F5182 bool "Marvell Orion-NAS Reference Design" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 @@ -43,14 +43,14 @@ config MACH_RD88F5182 config MACH_RD88F5182_DT bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" select ARCH_ORION5X_DT - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2, Flattened Device Tree. config MACH_KUROBOX_PRO bool "KuroBox Pro" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the KuroBox Pro platform. @@ -58,7 +58,7 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select GENERIC_NET_UTILS - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. @@ -78,7 +78,7 @@ config MACH_TERASTATION_PRO2 config MACH_LINKSTATION_PRO bool "Buffalo Linkstation Pro/Live" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation Pro/Live platform. Both v1 and @@ -86,7 +86,7 @@ config MACH_LINKSTATION_PRO config MACH_LINKSTATION_LSCHL bool "Buffalo Linkstation Live v3 (LS-CHL)" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation Live v3 (LS-CHL) platform. @@ -100,7 +100,7 @@ config MACH_LINKSTATION_MINI config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the Buffalo Linkstation LS-HGL platform. @@ -139,7 +139,7 @@ config MACH_D2NET_DT config MACH_NET2BIG bool "LaCie 2Big Network" - select I2C_BOARDINFO + select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-orion5x/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index f998eb1c698e..0cf4426183cf 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_SIRF bool "CSR SiRF" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select NO_IOPORT_MAP diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot deleted file mode 100644 index c77a4883a4ee..000000000000 --- a/arch/arm/mach-prima2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f09683687963..7ee4652b4c61 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -297,7 +297,6 @@ config MACH_MAGICIAN config MACH_MIOA701 bool "Mitac Mio A701 Support" - select GPIO_SYSFS select IWMMXT select PXA27x help @@ -529,7 +528,7 @@ config MACH_TOSA config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA + depends on MACH_TOSA && NET select RFKILL help This is a simple driver that is able to control diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 37d8d85662f0..913a319c7b00 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1203,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) static struct mmp_dma_platdata pxa_dma_pdata = { .dma_channels = 0, + .nb_requestors = 0, }; static struct resource pxa_dma_resource[] = { @@ -1231,7 +1232,7 @@ static struct platform_device pxa2xx_pxa_dma = { .resource = pxa_dma_resource, }; -void __init pxa2xx_set_dmac_info(int nb_channels) +void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors) { pxa_dma_pdata.dma_channels = nb_channels; pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata); diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 0b00b226f54b..e838b11fb8c7 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = { .gpio_pullup_inverted = 1 }; -static struct platform_device e7xx_gpio_vbus = { +static struct platform_device e7xx_gpio_vbus __maybe_unused = { .name = "gpio-vbus", .id = -1, .dev = { @@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = { }; /* Some e-series hardware cannot control the 32K clock */ -static void __init eseries_register_clks(void) +static void __init __maybe_unused eseries_register_clks(void) { clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768); } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6815a9357774..9c5b2fb054f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void) { int timeout = 500; - if (!(OSCC & OSCC_OOK)) + if (!(readl(OSCC) & OSCC_OOK)) pr_warn("32kHz clock was not on. Bootloader may need to be updated\n"); else return; - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); do { - if (OSCC & OSCC_OOK) + if (readl(OSCC) & OSCC_OOK) break; udelay(1); } while (--timeout); diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h index 1b80a4805a60..e69de29bb2d1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h @@ -1,163 +0,0 @@ -#ifndef _ASM_ARCH_PXA25X_UDC_H -#define _ASM_ARCH_PXA25X_UDC_H - -#ifdef _ASM_ARCH_PXA27X_UDC_H -#error "You can't include both PXA25x and PXA27x UDC support" -#endif - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index f1dd62946b36..5537d5601d70 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -134,10 +134,10 @@ /* * PXA2xx specific Core clock definitions */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ +#define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */ +#define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */ +#define CKEN io_p2v(0x41300004) /* Clock Enable Register */ +#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index f4d48d20754e..888bf7ade15a 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -18,7 +18,7 @@ /* * Oscillator Configuration Register (OSCC) */ -#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ +#define OSCC io_p2v(0x41350000) /* Oscillator Configuration Register */ #define OSCC_PEN (1 << 11) /* 13MHz POUT */ diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h index 51558bcee999..3aab90d8d2b7 100644 --- a/arch/arm/mach-pxa/pm.h +++ b/arch/arm/mach-pxa/pm.h @@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); extern void pxa_pm_finish(void); +extern const char pm_enter_standby_start[], pm_enter_standby_end[]; +extern int pxa3xx_finish_suspend(unsigned long); + /* NOTE: this is for PM debugging on Lubbock, it's really a big * ugly, but let's keep the crap minimum here, instead of direct * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index 8e0e62ccdced..f128133a8f30 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -19,42 +19,18 @@ #include "generic.h" #ifdef CONFIG_PXA3xx -static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL), - OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL), - OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL), - OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL), - OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL), - OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL), - OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL), - {} -}; - -static void __init pxa3xx_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - pxa3xx_auxdata_lookup, NULL); -} - static const char *const pxa3xx_dt_board_compat[] __initconst = { "marvell,pxa300", "marvell,pxa310", "marvell,pxa320", NULL, }; -#endif -#ifdef CONFIG_PXA3xx DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)") .map_io = pxa3xx_map_io, .init_irq = pxa3xx_dt_init_irq, .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, .restart = pxa_restart, - .init_machine = pxa3xx_dt_init, .dt_compat = pxa3xx_dt_board_compat, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index a177bf45feef..823504f48f80 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -206,7 +206,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - pxa2xx_set_dmac_info(16); + pxa2xx_set_dmac_info(16, 40); pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8dfd1755c659..2eaa341dd3f8 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) #ifndef CONFIG_IWMMXT u64 acc0; - asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mra %Q0, %R0, acc0" : "=r" (acc0)); #endif /* ensure voltage-change sequencer not initiated, which hangs */ @@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: cpu_suspend(pwrmode, pxa27x_finish_suspend); #ifndef CONFIG_IWMMXT - asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mar acc0, %Q0, %R0" : "=r" (acc0)); #endif break; } @@ -309,7 +311,7 @@ static int __init pxa27x_init(void) if (!of_have_populated_dt()) { pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); - pxa2xx_set_dmac_info(32); + pxa2xx_set_dmac_info(32, 75); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index a1c4c888f246..3c9184d1d6b9 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -68,7 +68,6 @@ static unsigned long wakeup_src; */ static void pxa3xx_cpu_standby(unsigned int pwrmode) { - extern const char pm_enter_standby_start[], pm_enter_standby_end[]; void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); memcpy_toio(sram + 0x8000, pm_enter_standby_start, @@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void) #ifndef CONFIG_IWMMXT u64 acc0; - asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mra %Q0, %R0, acc0" : "=r" (acc0)); #endif - extern int pxa3xx_finish_suspend(unsigned long); - /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); CKENB |= 1 << (CKEN_HSIO2 & 0x1f); @@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void) AD3ER = 0; #ifndef CONFIG_IWMMXT - asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mar acc0, %Q0, %R0" : "=r" (acc0)); #endif } @@ -450,7 +449,7 @@ static int __init pxa3xx_init(void) if (of_have_populated_dt()) return 0; - pxa2xx_set_dmac_info(32); + pxa2xx_set_dmac_info(32, 100); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) return ret; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8347d87a713d..5a941bd3dbed 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,12 +18,13 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/smsc911x.h> #include <linux/input.h> -#include <linux/rotary_encoder.h> #include <linux/gpio_keys.h> #include <linux/input/eeti_ts.h> #include <linux/leds.h> @@ -366,22 +367,31 @@ static struct pxaohci_platform_data raumfeld_ohci_info = { * Rotary encoder input device */ -static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { - .steps = 24, - .axis = REL_X, - .relative_axis = 1, - .gpio_a = GPIO_VOLENC_A, - .gpio_b = GPIO_VOLENC_B, - .inverted_a = 1, - .inverted_b = 0, +static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { + .dev_id = "rotary-encoder.0", + .table = { + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct property_entry raumfeld_rotary_properties[] = { + PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24), + PROPERTY_ENTRY_INTEGER("linux,axis", u32, REL_X), + PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 1), + { }, +}; + +static struct property_set raumfeld_rotary_property_set = { + .properties = raumfeld_rotary_properties, }; static struct platform_device rotary_encoder_device = { .name = "rotary-encoder", .id = 0, - .dev = { - .platform_data = &raumfeld_rotary_encoder_info, - } }; /** @@ -1051,7 +1061,12 @@ static void __init __maybe_unused raumfeld_controller_init(void) int ret; pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); + spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); @@ -1086,6 +1101,10 @@ static void __init __maybe_unused raumfeld_speaker_init(void) i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); platform_device_register(&smc91x_device); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); raumfeld_audio_init(); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 825f903ab77e..d9578bc49fdc 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void) } /* Power control is shared with between one of the CF slots and SD */ -static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) +static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) { unsigned short cpr; unsigned long flags; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 515b7ddda8aa..3b94ecfb9426 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -910,7 +910,7 @@ static void __init zeus_map_io(void) PMCR = PSPR = 0; /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */ - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...). * float chip selects and PCMCIA */ diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index def40a0dd60c..70ab4a25a5f8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_REALVIEW - bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + bool "ARM Ltd. RealView family" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARM_AMBA select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot deleted file mode 100644 index d2c3d788f688..000000000000 --- a/arch/arm/mach-realview/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70800000 -else - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index 65585392655b..6964e8876061 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) virt_to_phys(versatile_secondary_startup)); } -struct smp_operations realview_dt_smp_ops __initdata = { +static const struct smp_operations realview_dt_smp_ops __initconst = { .smp_prepare_cpus = realview_smp_prepare_cpus, .smp_secondary_init = versatile_secondary_init, .smp_boot_secondary = versatile_boot_secondary, diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 0fd4b0b8ef22..654a6f3f2547 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -76,7 +76,7 @@ int white; /* * This does not append a newline */ -static void putc(int c) +static inline void putc(int c) { extern void ll_write_char(char *, char c, char white); int x,y; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f02495f5ca1f..b91aee406c74 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -406,7 +406,7 @@ config MACH_S3C2416_DT endif # CPU_S3C2416 -if CPU_S3C2440 +if CPU_S3C2440 || CPU_S3C2442 config S3C2440_XTAL_12000000 bool @@ -433,6 +433,9 @@ config S3C2440_PLL_16934400 default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. +endif + +if CPU_S3C2440 comment "S3C2440 Boards" @@ -461,7 +464,6 @@ config MACH_AT2440EVB config MACH_MINI2440 bool "MINI2440 development board" - select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h index 5dd1db4e2677..235c53647aa4 100644 --- a/arch/arm/mach-s3c24xx/include/mach/io.h +++ b/arch/arm/mach-s3c24xx/include/mach/io.h @@ -190,7 +190,7 @@ DECLARE_IO(int,l,"") result; \ }) -#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) +#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port))) #define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) #define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index 444793f0f5f1..adc39043aa21 100644 --- a/arch/arm/mach-s3c24xx/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h @@ -14,13 +14,6 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> - -/* - * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x4000) - #include <plat/map-s3c.h> /* @@ -34,9 +27,6 @@ #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M -/* UARTs */ -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - /* Timers */ #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M @@ -157,7 +147,6 @@ #define S3C_PA_FB S3C2443_PA_FB #define S3C_PA_IIC S3C2410_PA_IIC -#define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0 #define S3C_PA_HSMMC1 S3C2443_PA_HSMMC diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 6d1e0b9c5b27..27ae6877550f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -154,6 +154,7 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = { #define ADC_NOM_CHG_DETECT_1A 6 #define ADC_NOM_CHG_DETECT_USB 43 +#ifdef CONFIG_PCF50633_ADC static void gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) { @@ -174,6 +175,7 @@ gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) pcf50633_mbc_usb_curlim_set(pcf, ma); } +#endif static struct delayed_work gta02_charger_work; static int gta02_usb_vbus_draw; diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 9f54300df4b3..7ed78619217c 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -664,7 +664,7 @@ static void __init h1940_map_io(void) /* Add latch gpio chip, set latch initial value */ h1940_latch_control(0, 0); - WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); + WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL)); } static void __init h1940_init_time(void) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 7c0c420c3016..e5c1888fc67b 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -3,7 +3,8 @@ # # Licensed under GPLv2 menuconfig ARCH_S3C64XX - bool "Samsung S3C64XX" if ARCH_MULTI_V6 + bool "Samsung S3C64XX" + depends on ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot deleted file mode 100644 index c642333af3ed..000000000000 --- a/arch/arm/mach-s3c64xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x50008000 -params_phys-y := 0x50000100 diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 8a894ee3ee76..92ec8c3b42b9 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -216,7 +216,7 @@ static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { REGULATOR_SUPPLY("AVDD", "0-001b"), }; -static struct regulator_init_data smdk6410_b_pwr_5v_data = { +static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = { .constraints = { .always_on = 1, }, @@ -300,7 +300,7 @@ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = { }; /* VDDARM, BUCK1 on J5 */ -static struct regulator_init_data smdk6410_vddarm = { +static struct regulator_init_data __maybe_unused smdk6410_vddarm = { .constraints = { .name = "PVDD_ARM", .min_uV = 1000000, @@ -313,7 +313,7 @@ static struct regulator_init_data smdk6410_vddarm = { }; /* VDD_INT, BUCK2 on J5 */ -static struct regulator_init_data smdk6410_vddint = { +static struct regulator_init_data __maybe_unused smdk6410_vddint = { .constraints = { .name = "PVDD_INT", .min_uV = 1000000, @@ -324,7 +324,7 @@ static struct regulator_init_data smdk6410_vddint = { }; /* VDD_HI, LDO3 on J5 */ -static struct regulator_init_data smdk6410_vddhi = { +static struct regulator_init_data __maybe_unused smdk6410_vddhi = { .constraints = { .name = "PVDD_HI", .always_on = 1, @@ -332,7 +332,7 @@ static struct regulator_init_data smdk6410_vddhi = { }; /* VDD_PLL, LDO2 on J5 */ -static struct regulator_init_data smdk6410_vddpll = { +static struct regulator_init_data __maybe_unused smdk6410_vddpll = { .constraints = { .name = "PVDD_PLL", .always_on = 1, @@ -340,7 +340,7 @@ static struct regulator_init_data smdk6410_vddpll = { }; /* VDD_UH_MMC, LDO5 on J5 */ -static struct regulator_init_data smdk6410_vdduh_mmc = { +static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = { .constraints = { .name = "PVDD_UH+PVDD_MMC", .always_on = 1, @@ -348,7 +348,7 @@ static struct regulator_init_data smdk6410_vdduh_mmc = { }; /* VCCM3BT, LDO8 on J5 */ -static struct regulator_init_data smdk6410_vccmc3bt = { +static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = { .constraints = { .name = "PVCCM3BT", .always_on = 1, @@ -356,7 +356,7 @@ static struct regulator_init_data smdk6410_vccmc3bt = { }; /* VCCM2MTV, LDO11 on J5 */ -static struct regulator_init_data smdk6410_vccm2mtv = { +static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = { .constraints = { .name = "PVCCM2MTV", .always_on = 1, @@ -364,7 +364,7 @@ static struct regulator_init_data smdk6410_vccm2mtv = { }; /* VDD_LCD, LDO12 on J5 */ -static struct regulator_init_data smdk6410_vddlcd = { +static struct regulator_init_data __maybe_unused smdk6410_vddlcd = { .constraints = { .name = "PVDD_LCD", .always_on = 1, @@ -372,7 +372,7 @@ static struct regulator_init_data smdk6410_vddlcd = { }; /* VDD_OTGI, LDO9 on J5 */ -static struct regulator_init_data smdk6410_vddotgi = { +static struct regulator_init_data __maybe_unused smdk6410_vddotgi = { .constraints = { .name = "PVDD_OTGI", .always_on = 1, @@ -380,7 +380,7 @@ static struct regulator_init_data smdk6410_vddotgi = { }; /* VDD_OTG, LDO14 on J5 */ -static struct regulator_init_data smdk6410_vddotg = { +static struct regulator_init_data __maybe_unused smdk6410_vddotg = { .constraints = { .name = "PVDD_OTG", .always_on = 1, @@ -388,7 +388,7 @@ static struct regulator_init_data smdk6410_vddotg = { }; /* VDD_ALIVE, LDO15 on J5 */ -static struct regulator_init_data smdk6410_vddalive = { +static struct regulator_init_data __maybe_unused smdk6410_vddalive = { .constraints = { .name = "PVDD_ALIVE", .always_on = 1, @@ -396,7 +396,7 @@ static struct regulator_init_data smdk6410_vddalive = { }; /* VDD_AUDIO, VLDO_AUDIO on J5 */ -static struct regulator_init_data smdk6410_vddaudio = { +static struct regulator_init_data __maybe_unused smdk6410_vddaudio = { .constraints = { .name = "PVDD_AUDIO", .always_on = 1, @@ -406,7 +406,7 @@ static struct regulator_init_data smdk6410_vddaudio = { #ifdef CONFIG_SMDK6410_WM1190_EV1 /* S3C64xx internal logic & PLL */ -static struct regulator_init_data wm8350_dcdc1_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = { .constraints = { .name = "PVDD_INT+PVDD_PLL", .min_uV = 1200000, @@ -417,7 +417,7 @@ static struct regulator_init_data wm8350_dcdc1_data = { }; /* Memory */ -static struct regulator_init_data wm8350_dcdc3_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = { .constraints = { .name = "PVDD_MEM", .min_uV = 1800000, @@ -437,7 +437,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { REGULATOR_SUPPLY("DVDD", "0-001b"), }; -static struct regulator_init_data wm8350_dcdc4_data = { +static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = { .constraints = { .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV", .min_uV = 3000000, @@ -449,7 +449,7 @@ static struct regulator_init_data wm8350_dcdc4_data = { }; /* OTGi/1190-EV1 HPVDD & AVDD */ -static struct regulator_init_data wm8350_ldo4_data = { +static struct regulator_init_data __maybe_unused wm8350_ldo4_data = { .constraints = { .name = "PVDD_OTGI+HPVDD+AVDD", .min_uV = 1200000, @@ -537,7 +537,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = { .max_uA = 27554, }; -static struct regulator_init_data wm1192_dcdc3 = { +static struct regulator_init_data __maybe_unused wm1192_dcdc3 = { .constraints = { .name = "PVDD_MEM+PVDD_GPS", .always_on = 1, @@ -548,7 +548,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = { REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */ }; -static struct regulator_init_data wm1192_ldo1 = { +static struct regulator_init_data __maybe_unused wm1192_ldo1 = { .constraints = { .name = "PVDD_LCD+PVDD_EXT", .always_on = 1, diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 73093dc89829..a1a041b9740b 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -19,7 +19,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putc(int c) +static inline void putc(int c) { unsigned long serial_port; diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index d8965c682d2f..bb3ca9c763de 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -15,7 +15,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -369,7 +369,7 @@ static int __init simpad_init(void) cs3_gpio.get = cs3_gpio_get; cs3_gpio.direction_input = cs3_gpio_direction_input; cs3_gpio.direction_output = cs3_gpio_direction_output; - ret = gpiochip_add(&cs3_gpio); + ret = gpiochip_add_data(&cs3_gpio, NULL); if (ret) printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device"); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index cd5f171f83ce..f2bc5c353119 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -6,28 +6,30 @@ config ARCH_SHMOBILE_MULTI config PM_RCAR bool - select PM_GENERIC_DOMAINS if PM + select PM + select PM_GENERIC_DOMAINS config PM_RMOBILE bool + select PM select PM_GENERIC_DOMAINS config ARCH_RCAR_GEN1 bool - select PM_RCAR if PM || SMP + select PM_RCAR select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_TMU config ARCH_RCAR_GEN2 bool - select PM_RCAR if PM || SMP + select PM_RCAR select RENESAS_IRQC select SYS_SUPPORTS_SH_CMT select PCI_DOMAINS if PCI config ARCH_RMOBILE bool - select PM_RMOBILE if PM + select PM_RMOBILE select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -55,7 +57,8 @@ config ARCH_EMEV2 config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" - select PM_GENERIC_DOMAINS if PM + select PM + select PM_GENERIC_DOMAINS select SYS_SUPPORTS_SH_MTU2 config ARCH_R8A73A4 @@ -99,6 +102,4 @@ config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" select ARCH_RMOBILE select RENESAS_INTC_IRQPIN - -comment "Renesas ARM SoCs System Configuration" endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 9cb11215ceba..5464b7a75e30 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -4,7 +4,6 @@ extern void shmobile_init_delay(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; -extern unsigned long shmobile_boot_arg; extern unsigned long shmobile_boot_size; extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); @@ -12,7 +11,8 @@ extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); extern void shmobile_boot_scu(void); -extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); +extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); extern struct platform_suspend_ops shmobile_suspend_ops; @@ -31,8 +31,6 @@ int shmobile_cpufreq_init(void); static inline int shmobile_cpufreq_init(void) { return 0; } #endif -extern void __iomem *shmobile_scu_base; - static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c index 57fbff024dcd..634d701c56a7 100644 --- a/arch/arm/mach-shmobile/cpufreq.c +++ b/arch/arm/mach-shmobile/cpufreq.c @@ -10,6 +10,8 @@ #include <linux/platform_device.h> +#include "common.h" + int __init shmobile_cpufreq_init(void) { platform_device_register_simple("cpufreq-dt", -1, NULL, 0); diff --git a/arch/arm/mach-shmobile/emev2.h b/arch/arm/mach-shmobile/emev2.h new file mode 100644 index 000000000000..916d25f6780e --- /dev/null +++ b/arch/arm/mach-shmobile/emev2.h @@ -0,0 +1,6 @@ +#ifndef __ASM_EMEV2_H__ +#define __ASM_EMEV2_H__ + +extern const struct smp_operations emev2_smp_ops; + +#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index fa5248c52399..936d7011c314 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -27,7 +27,7 @@ */ ENTRY(shmobile_boot_scu) @ r0 = SCU base address - mrc p15, 0, r1, c0, c0, 5 @ read MIPDR + mrc p15, 0, r1, c0, c0, 5 @ read MPIDR and r1, r1, #3 @ mask out cpu ID lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits ldr r2, [r0, #8] @ SCU Power Status Register @@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu) b secondary_startup ENDPROC(shmobile_boot_scu) - - .text - .align 2 - .globl shmobile_scu_base -shmobile_scu_base: - .space 4 diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 330c1fc63197..32e0bf6e3ccb 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,7 +24,6 @@ .arm .align 12 ENTRY(shmobile_boot_vector) - ldr r0, 2f ldr r1, 1f bx r1 @@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector) .globl shmobile_boot_fn shmobile_boot_fn: 1: .space 4 - .globl shmobile_boot_arg -shmobile_boot_arg: -2: .space 4 .globl shmobile_boot_size shmobile_boot_size: .long . - shmobile_boot_vector @@ -46,13 +42,15 @@ shmobile_boot_size: */ ENTRY(shmobile_smp_boot) - @ r0 = MPIDR_HWID_BITMASK mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR - and r0, r1, r0 @ r0 = cpu_logical_map() value + and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK + @ r0 = cpu_logical_map() value mov r1, #0 @ r1 = CPU index - adr r5, 1f @ array of per-cpu mpidr values - adr r6, 2f @ array of per-cpu functions - adr r7, 3f @ array of per-cpu arguments + adr r2, 1f + ldmia r2, {r5, r6, r7} + add r5, r5, r2 @ array of per-cpu mpidr values + add r6, r6, r2 @ array of per-cpu functions + add r7, r7, r2 @ array of per-cpu arguments shmobile_smp_boot_find_mpidr: ldr r8, [r5, r1, lsl #2] @@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep) b shmobile_smp_boot ENDPROC(shmobile_smp_sleep) + .align 2 +1: .long shmobile_smp_mpidr - . + .long shmobile_smp_fn - 1b + .long shmobile_smp_arg - 1b + + .bss .globl shmobile_smp_mpidr shmobile_smp_mpidr: -1: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_fn shmobile_smp_fn: -2: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_arg shmobile_smp_arg: -3: .space NR_CPUS * 4 + .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 911884f7e28b..aba75c89f9c1 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* perform per-cpu setup */ apmu_parse_cfg(apmu_init_cpu, apmu_config, num); diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 64663110ab6c..8d478f1da265 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -17,6 +17,10 @@ #include <asm/smp_scu.h> #include "common.h" + +static phys_addr_t shmobile_scu_base_phys; +static void __iomem *shmobile_scu_base; + static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -26,7 +30,7 @@ static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, case CPU_UP_PREPARE: /* For this particular CPU register SCU SMP boot vector */ shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), - (unsigned long)shmobile_scu_base); + shmobile_scu_base_phys); break; }; @@ -37,13 +41,15 @@ static struct notifier_block shmobile_smp_scu_notifier = { .notifier_call = shmobile_smp_scu_notifier_call, }; -void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) +void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* enable SCU and cache coherency on booting CPU */ + shmobile_scu_base_phys = scu_base_phys; + shmobile_scu_base = ioremap(scu_base_phys, PAGE_SIZE); scu_enable(shmobile_scu_base); scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 10b7cb5dcb3a..3c99aaf65325 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -18,35 +18,17 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" - -static struct map_desc emev2_io_desc[] __initdata = { -#ifdef CONFIG_SMP - /* 2M mapping for SCU + L2 controller */ - { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0x1e000000), - .length = SZ_2M, - .type = MT_DEVICE - }, -#endif -}; -static void __init emev2_map_io(void) -{ - iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); -} +#include "common.h" +#include "emev2.h" static const char *const emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, }; -extern const struct smp_operations emev2_smp_ops; - DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), - .map_io = emev2_map_io, .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .dt_compat = emev2_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 0c8f80c5b04d..db6dbfbaf9f1 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -23,41 +23,9 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/hardware/cache-l2x0.h> #include "common.h" -static struct map_desc r8a7740_io_desc[] __initdata = { - /* - * for CPGA/INTC/PFC - * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 160 << 20, - .type = MT_DEVICE_NONSHARED - }, -#ifdef CONFIG_CACHE_L2X0 - /* - * for l2x0_init() - * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 - */ - { - .virtual = 0xf0002000, - .pfn = __phys_to_pfn(0xf0100000), - .length = PAGE_SIZE, - .type = MT_DEVICE_NONSHARED - }, -#endif -}; - -static void __init r8a7740_map_io(void) -{ - debug_ll_io_init(); - iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); -} - /* * r8a7740 chip has lasting errata on MERAM buffer. * this is work-around for it. @@ -110,10 +78,6 @@ static void __init r8a7740_generic_init(void) { r8a7740_meram_workaround(); -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -123,7 +87,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") - .map_io = r8a7740_map_io, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 949b402c0f19..1c6fd11c2f82 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -182,8 +182,6 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, return 0; } -struct cma *rcar_gen2_dma_contiguous; - void __init rcar_gen2_reserve(void) { struct memory_reserve_config mrc; @@ -194,8 +192,11 @@ void __init rcar_gen2_reserve(void) of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); #ifdef CONFIG_DMA_CMA - if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) + if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) { + static struct cma *rcar_gen2_dma_contiguous; + dma_contiguous_reserve_area(mrc.size, mrc.base, 0, &rcar_gen2_dma_contiguous, true); + } #endif } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index adbac6963f2b..3a732199cf5e 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -21,7 +21,9 @@ #include <linux/delay.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> + #include "common.h" +#include "emev2.h" #define EMEV2_SCU_BASE 0x1e000000 #define EMEV2_SMU_BASE 0xe0110000 @@ -45,8 +47,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) } /* setup EMEV2 specific SCU bits */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(EMEV2_SCU_BASE, max_cpus); } const struct smp_operations emev2_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index b854fe2095ad..f5c31fbc10b2 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -92,12 +92,9 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ __raw_writel(__pa(shmobile_boot_vector), AVECR); - shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); - shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* setup r8a7779 specific SCU bits */ - shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index ee1a4b70604b..41137404382e 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -52,8 +52,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_boot_vector), SBAR); /* setup sh73a0 specific SCU bits */ - shmobile_scu_base = IOMEM(SH73A0_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus); } const struct smp_operations sh73a0_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 5d92b5dd486b..74b30bade2c1 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -17,6 +17,8 @@ #include <asm/io.h> #include <asm/system_misc.h> +#include "common.h" + static int shmobile_suspend_default_enter(suspend_state_t suspend_state) { cpu_do_idle(); diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index c17d4d3881ff..ad008e4b0c49 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -18,6 +18,8 @@ #include <linux/delay.h> #include <linux/of_address.h> +#include "common.h" + static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, unsigned int mult, unsigned int div) { diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index b8f9e238e4ab..ed15db19e561 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -5,3 +5,5 @@ obj-y := socfpga.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o +obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 5bc6ea87cdf7..575195be6687 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -36,6 +36,8 @@ extern void socfpga_init_clocks(void); extern void socfpga_sysmgr_init(void); +void socfpga_init_l2_ecc(void); +void socfpga_init_ocram_ecc(void); extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c new file mode 100644 index 000000000000..e3907ab58d05 --- /dev/null +++ b/arch/arm/mach-socfpga/l2_cache.c @@ -0,0 +1,41 @@ +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +void socfpga_init_l2_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_l2_edac_addr; + + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc"); + if (!np) { + pr_err("Unable to find socfpga-l2-ecc in dtb\n"); + return; + } + + mapped_l2_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_l2_edac_addr) { + pr_err("Unable to find L2 ECC mapping in dtb\n"); + return; + } + + /* Enable ECC */ + writel(0x01, mapped_l2_edac_addr); + iounmap(mapped_l2_edac_addr); +} diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c new file mode 100644 index 000000000000..60ec643ac2be --- /dev/null +++ b/arch/arm/mach-socfpga/ocram.c @@ -0,0 +1,49 @@ +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/genalloc.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#define ALTR_OCRAM_CLEAR_ECC 0x00000018 +#define ALTR_OCRAM_ECC_EN 0x00000019 + +void socfpga_init_ocram_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_ocr_edac_addr; + + /* Find the OCRAM EDAC device tree node */ + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc"); + if (!np) { + pr_err("Unable to find socfpga-ocram-ecc\n"); + return; + } + + mapped_ocr_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_ocr_edac_addr) { + pr_err("Unable to map OCRAM ecc regs.\n"); + return; + } + + /* Clear any pending OCRAM ECC interrupts, then enable ECC */ + writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr); + writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr); + + iounmap(mapped_ocr_edac_addr); +} diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index cbb0a54df80a..07945748b571 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -94,6 +94,7 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus) scu_enable(socfpga_scu_base_addr); } +#ifdef CONFIG_HOTPLUG_CPU /* * platform-specific code to shutdown a CPU * @@ -116,6 +117,7 @@ static int socfpga_cpu_kill(unsigned int cpu) { return 1; } +#endif static const struct smp_operations socfpga_smp_ops __initconst = { .smp_prepare_cpus = socfpga_smp_prepare_cpus, diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index a1c0efaa8794..7e0aad2ec3d1 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -59,6 +59,11 @@ static void __init socfpga_init_irq(void) { irqchip_init(); socfpga_sysmgr_init(); + if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C)) + socfpga_init_l2_ecc(); + + if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) + socfpga_init_ocram_ecc(); } static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index f2ad7723d034..ceee47735eec 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -10,6 +10,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32f429", + "st,stm32f469", NULL }; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index c2be98f38e73..3c156190a1d4 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -69,6 +69,7 @@ MACHINE_END static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", "allwinner,sun8i-a33", + "allwinner,sun8i-a83t", "allwinner,sun8i-h3", NULL, }; diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig index d6a3714b096e..ebe15b93bbe8 100644 --- a/arch/arm/mach-tango/Kconfig +++ b/arch/arm/mach-tango/Kconfig @@ -1,5 +1,6 @@ config ARCH_TANGO - bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7 + bool "Sigma Designs Tango4 (SMP87xx)" + depends on ARCH_MULTI_V7 # Cortex-A9 MPCore r3p0, PL310 r3p2 select ARCH_HAS_HOLES_MEMORYMODEL select ARM_ERRATA_754322 diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c index a18d5a34e2f5..a21f55e000d2 100644 --- a/arch/arm/mach-tango/platsmp.c +++ b/arch/arm/mach-tango/platsmp.c @@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -static struct smp_operations tango_smp_ops __initdata = { +static const struct smp_operations tango_smp_ops __initconst = { .smp_boot_secondary = tango_boot_secondary, }; diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 49d1110cff53..52db8bf7e153 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -17,23 +17,25 @@ * */ +#include <linux/property.h> #include <linux/gpio/machine.h> #include <linux/platform_device.h> -#include <linux/rfkill-gpio.h> #include "board.h" -static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { - .name = "wifi_rfkill", - .type = RFKILL_TYPE_WLAN, +static struct property_entry __initdata wifi_rfkill_prop[] = { + PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), + PROPERTY_ENTRY_STRING("type", "wlan"), + { }, +}; + +static struct property_set __initdata wifi_rfkill_pset = { + .properties = wifi_rfkill_prop, }; static struct platform_device wifi_rfkill_device = { .name = "rfkill_gpio", .id = -1, - .dev = { - .platform_data = &wifi_rfkill_platform_data, - }, }; static struct gpiod_lookup_table wifi_gpio_lookup = { @@ -47,6 +49,7 @@ static struct gpiod_lookup_table wifi_gpio_lookup = { void __init tegra_paz00_wifikill_init(void) { + platform_device_add_properties(&wifi_rfkill_device, &wifi_rfkill_pset); gpiod_add_lookup_table(&wifi_gpio_lookup); platform_device_register(&wifi_rfkill_device); } diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot deleted file mode 100644 index 87811de0bd94..000000000000 --- a/arch/arm/mach-u300/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x48008000 -params_phys-y := 0x48000100 -# This isn't used. -#initrd_phys-y := 0x48800000 diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index e1cfc1d6e2f4..69141357afe8 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -30,7 +30,7 @@ * The secondary CPUs check this register from the boot ROM for the jump * destination. After that, it can be reused as a scratch register. */ -#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208 +#define UNIPHIER_SMPCTRL_ROM_RSV2 0x208 static void __iomem *uniphier_smp_rom_boot_rsv2; static unsigned int uniphier_smp_max_cpus; @@ -98,16 +98,24 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) phys_addr_t rom_rsv2_phys; int ret; - np = of_find_compatible_node(NULL, NULL, - "socionext,uniphier-system-bus-controller"); - ret = of_address_to_resource(np, 1, &res); - if (ret) { - pr_err("failed to get resource of system-bus-controller\n"); - return ret; + np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl"); + of_node_put(np); + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; + } else { + /* try old binding too */ + np = of_find_compatible_node(NULL, NULL, + "socionext,uniphier-system-bus-controller"); + of_node_put(np); + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_err("failed to get resource of SMP control\n"); + return ret; + } + rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2; } - rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2; - ret = uniphier_smp_copy_trampoline(rom_rsv2_phys); if (ret) return ret; diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-ux500/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a0ffaad1fb61..a557955472ea 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -76,17 +76,19 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { static const char *db8500_read_soc_id(void) { void __iomem *uid; + const char *retstr; uid = ioremap(U8500_BB_UID_BASE, 0x20); if (!uid) return NULL; /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); - return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); iounmap(uid); + return retstr; } static struct device * __init db8500_soc_device_init(void) diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index e40f777ccf7d..b0cc26284fc9 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -8,8 +8,11 @@ config ARCH_VERSATILE select COMMON_CLK_VERSATILE select CPU_ARM926T select ICST + select MFD_SYSCON select MIGHT_HAVE_PCI select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE select VERSATILE_FPGA_IRQ help This enables support for ARM Ltd Versatile board. diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index c44871851255..dff1c0595b67 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -52,8 +52,6 @@ * Versatile Registers * ------------------------------------------------------------------------ */ -#define VERSATILE_SYS_LOCK_OFFSET 0x20 -#define VERSATILE_SYS_RESETCTL_OFFSET 0x40 #define VERSATILE_SYS_PCICTL_OFFSET 0x44 #define VERSATILE_SYS_MCI_OFFSET 0x48 #define VERSATILE_SYS_FLASH_OFFSET 0x4C @@ -345,18 +343,6 @@ static void __init versatile_init_early(void) __io_address(VERSATILE_SCTL_BASE)); } -static void versatile_restart(enum reboot_mode mode, const char *cmd) -{ - u32 val; - - val = readl(versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET); - val |= 0x105; - - writel(0xa05f, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET); - writel(val, versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET); - writel(0, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET); -} - static void __init versatile_dt_pci_init(void) { u32 val; @@ -420,5 +406,4 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .init_early = versatile_init_early, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, - .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c index ba05aec7ea4b..55d1a00dbd28 100644 --- a/arch/arm/mach-w90x900/gpio.c +++ b/arch/arm/mach-w90x900/gpio.c @@ -20,7 +20,7 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <mach/hardware.h> @@ -30,7 +30,6 @@ #define GPIO_IN (0x0C) #define GROUPINERV (0x10) #define GPIO_GPIO(Nb) (0x00000001 << (Nb)) -#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip) #define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \ { \ @@ -53,7 +52,7 @@ struct nuc900_gpio_chip { static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_IN; unsigned int regval; @@ -65,7 +64,7 @@ static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset) static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT; unsigned int regval; unsigned long flags; @@ -86,7 +85,7 @@ static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val) static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; unsigned long flags; @@ -104,7 +103,7 @@ static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset) static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val) { - struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip); + struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip); void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT; void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR; unsigned int regval; @@ -149,6 +148,6 @@ void __init nuc900_init_gpio(int nr_group) gpio_chip = &nuc900_gpio[i]; spin_lock_init(&gpio_chip->gpio_lock); gpio_chip->regbase = GPIO_BASE + i * GROUPINERV; - gpiochip_add(&gpio_chip->chip); + gpiochip_add_data(&gpio_chip->chip, gpio_chip); } } diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 4b7c324ff664..3855ecebda6e 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -27,7 +27,7 @@ #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) static volatile u32 * const uart_base = (u32 *)UART0_PA; -static void putc(int ch) +static inline void putc(int ch) { /* Check THRE and TEMT bits before we transmit the character. */ diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-zynq/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6f39d03cc27e..860ffb663f02 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -150,8 +150,6 @@ out: static void __init zynq_timer_init(void) { - zynq_early_slcr_init(); - zynq_clock_init(); of_clk_init(NULL); clocksource_probe(); @@ -186,6 +184,7 @@ static void __init zynq_map_io(void) static void __init zynq_irq_init(void) { + zynq_early_slcr_init(); irqchip_init(); } diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index 26320ebf3493..f0292a30e6f6 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -28,6 +28,7 @@ #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */ #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */ #define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */ +#define SLCR_L2C_RAM 0xA1C /* L2C_RAM in AR#54190 */ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_A9_CPU_CLKSTOP 0x10 @@ -227,6 +228,9 @@ int __init zynq_early_slcr_init(void) /* unlock the SLCR so that registers can be changed */ zynq_slcr_unlock(); + /* See AR#54190 design advisory */ + regmap_update_bits(zynq_slcr_regmap, SLCR_L2C_RAM, 0x70707, 0x20202); + register_restart_handler(&zynq_slcr_restart_nb); pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 549f6d3aec5b..55347662e5ed 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1037,24 +1037,26 @@ config ARCH_SUPPORTS_BIG_ENDIAN This option specifies the architecture can support big endian operation. -config ARM_KERNMEM_PERMS - bool "Restrict kernel memory permissions" - depends on MMU - help - If this is set, kernel memory other than kernel text (and rodata) - will be made non-executable. The tradeoff is that each region is - padded to section-size (1MiB) boundaries (because their permissions - are different and splitting the 1M pages into 4K ones causes TLB - performance problems), wasting memory. - config DEBUG_RODATA bool "Make kernel text and rodata read-only" - depends on ARM_KERNMEM_PERMS + depends on MMU && !XIP_KERNEL + default y if CPU_V7 + help + If this is set, kernel text and rodata memory will be made + read-only, and non-text kernel memory will be made non-executable. + The tradeoff is that each region is padded to section-size (1MiB) + boundaries (because their permissions are different and splitting + the 1M pages into 4K ones causes TLB performance problems), which + can waste memory. + +config DEBUG_ALIGN_RODATA + bool "Make rodata strictly non-executable" + depends on DEBUG_RODATA default y help - If this is set, kernel text and rodata will be made read-only. This - is to help catch accidental or malicious attempts to change the - kernel's executable code. Additionally splits rodata from kernel - text so it can be made explicitly non-executable. This creates - another section-size padded region, so it can waste more memory - space while gaining the read-only protections. + If this is set, rodata will be made explicitly non-executable. This + provides protection on the rare chance that attackers might find and + use ROP gadgets that exist in the rodata section. This adds an + additional section-aligned split of rodata from kernel text so it + can be made explicitly non-executable. This padding may waste memory + space to gain the additional protection. diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 1e373d268c04..88255bea65e4 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -22,6 +22,11 @@ #include <asm/cputype.h> #include <asm/hardware/cache-tauros2.h> +/* CP15 PJ4 Control configuration register */ +#define CCR_L2C_PREFETCH_DISABLE BIT(24) +#define CCR_L2C_ECC_ENABLE BIT(23) +#define CCR_L2C_WAY7_4_DISABLE BIT(21) +#define CCR_L2C_BURST8_ENABLE BIT(20) /* * When Tauros2 is used on a CPU that supports the v7 hierarchical @@ -182,18 +187,18 @@ static void enable_extra_feature(unsigned int features) u = read_extra_features(); if (features & CACHE_TAUROS2_PREFETCH_ON) - u &= ~0x01000000; + u &= ~CCR_L2C_PREFETCH_DISABLE; else - u |= 0x01000000; + u |= CCR_L2C_PREFETCH_DISABLE; pr_info("Tauros2: %s L2 prefetch.\n", (features & CACHE_TAUROS2_PREFETCH_ON) ? "Enabling" : "Disabling"); if (features & CACHE_TAUROS2_LINEFILL_BURST8) - u |= 0x00100000; + u |= CCR_L2C_BURST8_ENABLE; else - u &= ~0x00100000; - pr_info("Tauros2: %s line fill burt8.\n", + u &= ~CCR_L2C_BURST8_ENABLE; + pr_info("Tauros2: %s burst8 line fill.\n", (features & CACHE_TAUROS2_LINEFILL_BURST8) ? "Enabling" : "Disabling"); @@ -287,16 +292,15 @@ void __init tauros2_init(unsigned int features) node = of_find_matching_node(NULL, tauros2_ids); if (!node) { pr_info("Not found marvell,tauros2-cache, disable it\n"); - return; + } else { + ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); + if (ret) { + pr_info("Not found marvell,tauros-cache-features property, " + "disable extra features\n"); + features = 0; + } else + features = f; } - - ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); - if (ret) { - pr_info("Not found marvell,tauros-cache-features property, " - "disable extra features\n"); - features = 0; - } else - features = f; #endif tauros2_internal_init(features); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0eca3812527e..deac58d5f1f7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -42,6 +42,55 @@ #include "dma.h" #include "mm.h" +struct arm_dma_alloc_args { + struct device *dev; + size_t size; + gfp_t gfp; + pgprot_t prot; + const void *caller; + bool want_vaddr; +}; + +struct arm_dma_free_args { + struct device *dev; + size_t size; + void *cpu_addr; + struct page *page; + bool want_vaddr; +}; + +struct arm_dma_allocator { + void *(*alloc)(struct arm_dma_alloc_args *args, + struct page **ret_page); + void (*free)(struct arm_dma_free_args *args); +}; + +struct arm_dma_buffer { + struct list_head list; + void *virt; + struct arm_dma_allocator *allocator; +}; + +static LIST_HEAD(arm_dma_bufs); +static DEFINE_SPINLOCK(arm_dma_bufs_lock); + +static struct arm_dma_buffer *arm_dma_buffer_find(void *virt) +{ + struct arm_dma_buffer *buf, *found = NULL; + unsigned long flags; + + spin_lock_irqsave(&arm_dma_bufs_lock, flags); + list_for_each_entry(buf, &arm_dma_bufs, list) { + if (buf->virt == virt) { + list_del(&buf->list); + found = buf; + break; + } + } + spin_unlock_irqrestore(&arm_dma_bufs_lock, flags); + return found; +} + /* * The DMA API is built upon the notion of "buffer ownership". A buffer * is either exclusively owned by the CPU (and therefore may be accessed @@ -592,7 +641,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL #define __alloc_from_pool(size, ret_page) NULL #define __alloc_from_contiguous(dev, size, prot, ret, c, wv) NULL -#define __free_from_pool(cpu_addr, size) 0 +#define __free_from_pool(cpu_addr, size) do { } while (0) #define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) @@ -610,7 +659,78 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp, return page_address(page); } +static void *simple_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_simple_buffer(args->dev, args->size, args->gfp, + ret_page); +} + +static void simple_allocator_free(struct arm_dma_free_args *args) +{ + __dma_free_buffer(args->page, args->size); +} +static struct arm_dma_allocator simple_allocator = { + .alloc = simple_allocator_alloc, + .free = simple_allocator_free, +}; + +static void *cma_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_from_contiguous(args->dev, args->size, args->prot, + ret_page, args->caller, + args->want_vaddr); +} + +static void cma_allocator_free(struct arm_dma_free_args *args) +{ + __free_from_contiguous(args->dev, args->page, args->cpu_addr, + args->size, args->want_vaddr); +} + +static struct arm_dma_allocator cma_allocator = { + .alloc = cma_allocator_alloc, + .free = cma_allocator_free, +}; + +static void *pool_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_from_pool(args->size, ret_page); +} + +static void pool_allocator_free(struct arm_dma_free_args *args) +{ + __free_from_pool(args->cpu_addr, args->size); +} + +static struct arm_dma_allocator pool_allocator = { + .alloc = pool_allocator_alloc, + .free = pool_allocator_free, +}; + +static void *remap_allocator_alloc(struct arm_dma_alloc_args *args, + struct page **ret_page) +{ + return __alloc_remap_buffer(args->dev, args->size, args->gfp, + args->prot, ret_page, args->caller, + args->want_vaddr); +} + +static void remap_allocator_free(struct arm_dma_free_args *args) +{ + if (args->want_vaddr) + __dma_free_remap(args->cpu_addr, args->size); + + __dma_free_buffer(args->page, args->size); +} + +static struct arm_dma_allocator remap_allocator = { + .alloc = remap_allocator_alloc, + .free = remap_allocator_free, +}; static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, @@ -619,7 +739,16 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, u64 mask = get_coherent_dma_mask(dev); struct page *page = NULL; void *addr; - bool want_vaddr; + bool allowblock, cma; + struct arm_dma_buffer *buf; + struct arm_dma_alloc_args args = { + .dev = dev, + .size = PAGE_ALIGN(size), + .gfp = gfp, + .prot = prot, + .caller = caller, + .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + }; #ifdef CONFIG_DMA_API_DEBUG u64 limit = (mask + 1) & ~mask; @@ -633,6 +762,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (!mask) return NULL; + buf = kzalloc(sizeof(*buf), gfp); + if (!buf) + return NULL; + if (mask < 0xffffffffULL) gfp |= GFP_DMA; @@ -644,28 +777,37 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, * platform; see CONFIG_HUGETLBFS. */ gfp &= ~(__GFP_COMP); + args.gfp = gfp; *handle = DMA_ERROR_CODE; - size = PAGE_ALIGN(size); - want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); - - if (nommu()) - addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (dev_get_cma_area(dev) && (gfp & __GFP_DIRECT_RECLAIM)) - addr = __alloc_from_contiguous(dev, size, prot, &page, - caller, want_vaddr); - else if (is_coherent) - addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (!gfpflags_allow_blocking(gfp)) - addr = __alloc_from_pool(size, &page); + allowblock = gfpflags_allow_blocking(gfp); + cma = allowblock ? dev_get_cma_area(dev) : false; + + if (cma) + buf->allocator = &cma_allocator; + else if (nommu() || is_coherent) + buf->allocator = &simple_allocator; + else if (allowblock) + buf->allocator = &remap_allocator; else - addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, - caller, want_vaddr); + buf->allocator = &pool_allocator; + + addr = buf->allocator->alloc(&args, &page); + + if (page) { + unsigned long flags; - if (page) *handle = pfn_to_dma(dev, page_to_pfn(page)); + buf->virt = args.want_vaddr ? addr : page; + + spin_lock_irqsave(&arm_dma_bufs_lock, flags); + list_add(&buf->list, &arm_dma_bufs); + spin_unlock_irqrestore(&arm_dma_bufs_lock, flags); + } else { + kfree(buf); + } - return want_vaddr ? addr : page; + return args.want_vaddr ? addr : page; } /* @@ -741,25 +883,21 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, bool is_coherent) { struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); - bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); - - size = PAGE_ALIGN(size); - - if (nommu()) { - __dma_free_buffer(page, size); - } else if (!is_coherent && __free_from_pool(cpu_addr, size)) { + struct arm_dma_buffer *buf; + struct arm_dma_free_args args = { + .dev = dev, + .size = PAGE_ALIGN(size), + .cpu_addr = cpu_addr, + .page = page, + .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + }; + + buf = arm_dma_buffer_find(cpu_addr); + if (WARN(!buf, "Freeing invalid buffer %p\n", cpu_addr)) return; - } else if (!dev_get_cma_area(dev)) { - if (want_vaddr && !is_coherent) - __dma_free_remap(cpu_addr, size); - __dma_free_buffer(page, size); - } else { - /* - * Non-atomic allocations cannot be freed with IRQs disabled - */ - WARN_ON(irqs_disabled()); - __free_from_contiguous(dev, page, cpu_addr, size, want_vaddr); - } + + buf->allocator->free(&args); + kfree(buf); } void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, @@ -1122,6 +1260,9 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, spin_unlock_irqrestore(&mapping->lock, flags); } +/* We'll try 2M, 1M, 64K, and finally 4K; array must end with 0! */ +static const int iommu_order_array[] = { 9, 8, 4, 0 }; + static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t gfp, struct dma_attrs *attrs) { @@ -1129,6 +1270,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, int count = size >> PAGE_SHIFT; int array_size = count * sizeof(struct page *); int i = 0; + int order_idx = 0; if (array_size <= PAGE_SIZE) pages = kzalloc(array_size, GFP_KERNEL); @@ -1154,6 +1296,10 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, return pages; } + /* Go straight to 4K chunks if caller says it's OK. */ + if (dma_get_attr(DMA_ATTR_ALLOC_SINGLE_PAGES, attrs)) + order_idx = ARRAY_SIZE(iommu_order_array) - 1; + /* * IOMMU can map any pages, so himem can also be used here */ @@ -1162,22 +1308,24 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, while (count) { int j, order; - for (order = __fls(count); order > 0; --order) { - /* - * We do not want OOM killer to be invoked as long - * as we can fall back to single pages, so we force - * __GFP_NORETRY for orders higher than zero. - */ - pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); - if (pages[i]) - break; + order = iommu_order_array[order_idx]; + + /* Drop down when we get small */ + if (__fls(count) < order) { + order_idx++; + continue; } - if (!pages[i]) { - /* - * Fall back to single page allocation. - * Might invoke OOM killer as last resort. - */ + if (order) { + /* See if it's easy to allocate a high-order chunk */ + pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); + + /* Go down a notch at first sign of pressure */ + if (!pages[i]) { + order_idx++; + continue; + } + } else { pages[i] = alloc_pages(gfp, 0); if (!pages[i]) goto error; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index daafcf121ce0..ad5841856007 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -346,7 +346,7 @@ retry: up_read(&mm->mmap_sem); /* - * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR + * Handle the "normal" case first - VM_FAULT_MAJOR */ if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) return 0; diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index d65909697165..bd274a05b8ff 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -15,7 +15,7 @@ * page tables. */ pgd_t *idmap_pgd; -phys_addr_t (*arch_virt_to_idmap) (unsigned long x); +unsigned long (*arch_virt_to_idmap)(unsigned long x); #ifdef CONFIG_ARM_LPAE static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 49bd08178008..370581aeb871 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -572,8 +572,9 @@ void __init mem_init(void) } } -#ifdef CONFIG_ARM_KERNMEM_PERMS +#ifdef CONFIG_DEBUG_RODATA struct section_perm { + const char *name; unsigned long start; unsigned long end; pmdval_t mask; @@ -581,9 +582,13 @@ struct section_perm { pmdval_t clear; }; +/* First section-aligned location at or after __start_rodata. */ +extern char __start_rodata_section_aligned[]; + static struct section_perm nx_perms[] = { /* Make pages tables, etc before _stext RW (set NX). */ { + .name = "pre-text NX", .start = PAGE_OFFSET, .end = (unsigned long)_stext, .mask = ~PMD_SECT_XN, @@ -591,26 +596,26 @@ static struct section_perm nx_perms[] = { }, /* Make init RW (set NX). */ { + .name = "init NX", .start = (unsigned long)__init_begin, .end = (unsigned long)_sdata, .mask = ~PMD_SECT_XN, .prot = PMD_SECT_XN, }, -#ifdef CONFIG_DEBUG_RODATA /* Make rodata NX (set RO in ro_perms below). */ { - .start = (unsigned long)__start_rodata, + .name = "rodata NX", + .start = (unsigned long)__start_rodata_section_aligned, .end = (unsigned long)__init_begin, .mask = ~PMD_SECT_XN, .prot = PMD_SECT_XN, }, -#endif }; -#ifdef CONFIG_DEBUG_RODATA static struct section_perm ro_perms[] = { /* Make kernel code and rodata RX (set RO). */ { + .name = "text/rodata RO", .start = (unsigned long)_stext, .end = (unsigned long)__init_begin, #ifdef CONFIG_ARM_LPAE @@ -623,7 +628,6 @@ static struct section_perm ro_perms[] = { #endif }, }; -#endif /* * Updates section permissions only for the current mm (sections are @@ -670,8 +674,8 @@ void set_section_perms(struct section_perm *perms, int n, bool set, for (i = 0; i < n; i++) { if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) || !IS_ALIGNED(perms[i].end, SECTION_SIZE)) { - pr_err("BUG: section %lx-%lx not aligned to %lx\n", - perms[i].start, perms[i].end, + pr_err("BUG: %s section %lx-%lx not aligned to %lx\n", + perms[i].name, perms[i].start, perms[i].end, SECTION_SIZE); continue; } @@ -712,7 +716,6 @@ void fix_kernmem_perms(void) stop_machine(__fix_kernmem_perms, NULL, NULL); } -#ifdef CONFIG_DEBUG_RODATA int __mark_rodata_ro(void *unused) { update_sections_early(ro_perms, ARRAY_SIZE(ro_perms)); @@ -735,11 +738,10 @@ void set_kernel_text_ro(void) set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true, current->active_mm); } -#endif /* CONFIG_DEBUG_RODATA */ #else static inline void fix_kernmem_perms(void) { } -#endif /* CONFIG_ARM_KERNMEM_PERMS */ +#endif /* CONFIG_DEBUG_RODATA */ void free_tcmmem(void) { diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 4b4058db0781..66353caa35b9 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void) { unsigned long rnd; - rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1); + rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1); return rnd << PAGE_SHIFT; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 434d76f0b363..62f4d01941f7 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -732,7 +732,7 @@ static void *__init late_alloc(unsigned long sz) return ptr; } -static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, +static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot, void *(*alloc)(unsigned long sz)) { @@ -747,7 +747,7 @@ static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr, static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { - return pte_alloc(pmd, addr, prot, early_alloc); + return arm_pte_alloc(pmd, addr, prot, early_alloc); } static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, @@ -756,7 +756,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, void *(*alloc)(unsigned long sz), bool ng) { - pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc); + pte_t *pte = arm_pte_alloc(pmd, addr, type->prot_l1, alloc); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), ng ? PTE_EXT_NG : 0); @@ -1253,7 +1253,7 @@ static inline void prepare_page_table(void) #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; + addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK; #endif for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1335,7 +1335,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) #ifdef CONFIG_XIP_KERNEL map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); map.virtual = MODULES_VADDR; - map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK; map.type = MT_ROM; create_mapping(&map); #endif @@ -1426,7 +1426,11 @@ static void __init kmap_init(void) static void __init map_lowmem(void) { struct memblock_region *reg; +#ifdef CONFIG_XIP_KERNEL + phys_addr_t kernel_x_start = round_down(__pa(_sdata), SECTION_SIZE); +#else phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE); +#endif phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE); /* Map all the lowmem memory banks. */ diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index cf30daff8932..d19b1ad29b07 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } + if (!numpages) + return 0; + if (start < MODULES_VADDR || start >= MODULES_END) return -EINVAL; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index e683db1b90a3..b8d477321730 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -80,7 +80,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) if (!new_pmd) goto no_pmd; - new_pte = pte_alloc_map(mm, NULL, new_pmd, 0); + new_pte = pte_alloc_map(mm, new_pmd, 0); if (!new_pte) goto no_pte; diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0f92d575a304..0f8963a7e7d9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -487,7 +487,7 @@ __errata_finish: .align 2 __v7_setup_stack_ptr: - .word __v7_setup_stack - . + .word PHYS_RELATIVE(__v7_setup_stack, .) ENDPROC(__v7_setup) .bss diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 7bd22d8e5b11..f74069386c13 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -154,8 +154,7 @@ err_out: */ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) || orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) @@ -166,8 +165,7 @@ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK)) @@ -182,8 +180,7 @@ static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); int val; if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) { @@ -198,8 +195,7 @@ static int orion_gpio_get(struct gpio_chip *chip, unsigned pin) static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK)) @@ -216,8 +212,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value) static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); unsigned long flags; spin_lock_irqsave(&ochip->lock, flags); @@ -227,8 +222,7 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value) static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); return irq_create_mapping(ochip->domain, ochip->secondary_irq_base + pin); @@ -445,8 +439,8 @@ static void gpio_irq_handler(struct irq_desc *desc) static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { - struct orion_gpio_chip *ochip = - container_of(chip, struct orion_gpio_chip, chip); + + struct orion_gpio_chip *ochip = gpiochip_get_data(chip); u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk; int i; @@ -567,7 +561,7 @@ void __init orion_gpio_init(struct device_node *np, ochip->mask_offset = mask_offset; ochip->secondary_irq_base = secondary_irq_base; - gpiochip_add(&ochip->chip); + gpiochip_add_data(&ochip->chip, ochip); /* * Mask and clear GPIO interrupts. diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 8085a8aac812..ffb93db68e9c 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/sched_clock.h> #include <plat/time.h> +#include <asm/delay.h> /* * MBus bridge block registers. @@ -188,6 +189,15 @@ orion_time_set_base(void __iomem *_timer_base) timer_base = _timer_base; } +static unsigned long orion_delay_timer_read(void) +{ + return ~readl(timer_base + TIMER0_VAL_OFF); +} + +static struct delay_timer orion_delay_timer = { + .read_current_timer = orion_delay_timer_read, +}; + void __init orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, unsigned int irq, unsigned int tclk) @@ -202,6 +212,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, ticks_per_jiffy = (tclk + HZ/2) / HZ; + orion_delay_timer.freq = tclk; + register_current_timer_delay(&orion_delay_timer); + /* * Set scale and timer for sched_clock. */ diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h index 28848b344e2d..ceba3e4184fc 100644 --- a/arch/arm/plat-pxa/include/plat/dma.h +++ b/arch/arm/plat-pxa/include/plat/dma.h @@ -95,6 +95,6 @@ static inline int pxad_toggle_reserved_channel(int legacy_channel) } #endif -extern void __init pxa2xx_set_dmac_info(int nb_channels); +extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors); #endif /* __PLAT_DMA_H */ diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index efa6e85619ad..daf3db9f0058 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -422,8 +422,7 @@ static int s3c_adc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int s3c_adc_suspend(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -444,8 +443,7 @@ static int s3c_adc_suspend(struct device *dev) static int s3c_adc_resume(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct adc_device *adc = platform_get_drvdata(pdev); enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data; int ret; diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index c0c70a895ca8..6feedd47d875 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -27,10 +27,6 @@ #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - /* * GPIO ports * diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index f5cf2bd208e0..4ec9a7050185 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -23,7 +23,6 @@ #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_TWD S5P_VA_COREPERI(0x600) #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) @@ -31,10 +30,6 @@ #define VA_VIC2 VA_VIC(2) #define VA_VIC3 VA_VIC(3) -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - #include <plat/map-s3c.h> #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 04aff2c31b46..70f2f699bed3 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -53,8 +53,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) if (ptr->child != NULL) s3c_pm_run_res(ptr->child, fn, arg); - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { + if ((ptr->flags & IORESOURCE_SYSTEM_RAM) + == IORESOURCE_SYSTEM_RAM) { S3C_PMDBG("Found system RAM at %08lx..%08lx\n", (unsigned long)ptr->start, (unsigned long)ptr->end); diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 49b8ef91584a..98b9b8e9f698 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,8 +1,5 @@ if PLAT_VERSATILE -config PLAT_VERSATILE_CLOCK - bool - config PLAT_VERSATILE_SCHED_CLOCK bool diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 03c4900ac3f4..bff3ba889882 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,4 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c deleted file mode 100644 index 5c8b6564fdc2..000000000000 --- a/arch/arm/plat-versatile/clock.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/plat-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst.h> - -#include <mach/clkdev.h> - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret = -EIO; - if (clk->ops && clk->ops->round) - ret = clk->ops->round(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - if (clk->ops && clk->ops->set) - ret = clk->ops->set(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -long icst_clk_round(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - vco = icst_hz_to_vco(clk->params, rate); - return icst_hz(clk->params, vco); -} -EXPORT_SYMBOL(icst_clk_round); - -int icst_clk_set(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - - vco = icst_hz_to_vco(clk->params, rate); - clk->rate = icst_hz(clk->params, vco); - clk->ops->setvco(clk, vco); - - return 0; -} -EXPORT_SYMBOL(icst_clk_set); diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S index b2b97e3e7bab..a62a7b64f49c 100644 --- a/arch/arm/vdso/vdso.S +++ b/arch/arm/vdso/vdso.S @@ -23,9 +23,8 @@ #include <linux/const.h> #include <asm/page.h> - __PAGE_ALIGNED_DATA - .globl vdso_start, vdso_end + .section .data..ro_after_init .balign PAGE_SIZE vdso_start: .incbin "arch/arm/vdso/vdso.so" |