1 files changed, 168 insertions, 0 deletions
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
new file mode 100644
index 000000000000..abe69b80cf7f
--- /dev/null
+++ b/arch/arm64/mm/cache.S
@@ -0,0 +1,168 @@
+/*
+ * Cache maintenance
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+#include "proc-macros.S"
+
+/*
+ *	__flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: x0-x7, x9-x11
+ */
+ENTRY(__flush_dcache_all)
+	dsb	sy				// ensure ordering with previous memory accesses
+	mrs	x0, clidr_el1			// read clidr
+	and	x3, x0, #0x7000000		// extract loc from clidr
+	lsr	x3, x3, #23			// left align loc bit field
+	cbz	x3, finished			// if loc is 0, then no need to clean
+	mov	x10, #0				// start clean at cache level 0
+loop1:
+	add	x2, x10, x10, lsr #1		// work out 3x current cache level
+	lsr	x1, x0, x2			// extract cache type bits from clidr
+	and	x1, x1, #7			// mask of the bits for current cache only
+	cmp	x1, #2				// see what cache we have at this level
+	b.lt	skip				// skip if no cache, or just i-cache
+	save_and_disable_irqs x9		// make CSSELR and CCSIDR access atomic
+	msr	csselr_el1, x10			// select current cache level in csselr
+	isb					// isb to sych the new cssr&csidr
+	mrs	x1, ccsidr_el1			// read the new ccsidr
+	restore_irqs x9
+	and	x2, x1, #7			// extract the length of the cache lines
+	add	x2, x2, #4			// add 4 (line length offset)
+	mov	x4, #0x3ff
+	and	x4, x4, x1, lsr #3		// find maximum number on the way size
+	clz	x5, x4				// find bit position of way size increment
+	mov	x7, #0x7fff
+	and	x7, x7, x1, lsr #13		// extract max number of the index size
+loop2:
+	mov	x9, x4				// create working copy of max way size
+loop3:
+	lsl	x6, x9, x5
+	orr	x11, x10, x6			// factor way and cache number into x11
+	lsl	x6, x7, x2
+	orr	x11, x11, x6			// factor index number into x11
+	dc	cisw, x11			// clean & invalidate by set/way
+	subs	x9, x9, #1			// decrement the way
+	b.ge	loop3
+	subs	x7, x7, #1			// decrement the index
+	b.ge	loop2
+skip:
+	add	x10, x10, #2			// increment cache number
+	cmp	x3, x10
+	b.gt	loop1
+finished:
+	mov	x10, #0				// swith back to cache level 0
+	msr	csselr_el1, x10			// select current cache level in csselr
+	dsb	sy
+	isb
+	ret
+ENDPROC(__flush_dcache_all)
+
+/*
+ *	flush_cache_all()
+ *
+ *	Flush the entire cache system.  The data cache flush is now achieved
+ *	using atomic clean / invalidates working outwards from L1 cache. This
+ *	is done using Set/Way based cache maintainance instructions.  The
+ *	instruction cache can still be invalidated back to the point of
+ *	unification in a single instruction.
+ */
+ENTRY(flush_cache_all)
+	mov	x12, lr
+	bl	__flush_dcache_all
+	mov	x0, #0
+	ic	ialluis				// I+BTB cache invalidate
+	ret	x12
+ENDPROC(flush_cache_all)
+
+/*
+ *	flush_icache_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(flush_icache_range)
+	/* FALLTHROUGH */
+
+/*
+ *	__flush_cache_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(__flush_cache_user_range)
+	dcache_line_size x2, x3
+	sub	x3, x2, #1
+	bic	x4, x0, x3
+1:
+USER(9f, dc	cvau, x4	)		// clean D line to PoU
+	add	x4, x4, x2
+	cmp	x4, x1
+	b.lo	1b
+	dsb	sy
+
+	icache_line_size x2, x3
+	sub	x3, x2, #1
+	bic	x4, x0, x3
+1:
+USER(9f, ic	ivau, x4	)		// invalidate I line PoU
+	add	x4, x4, x2
+	cmp	x4, x1
+	b.lo	1b
+9:						// ignore any faulting cache operation
+	dsb	sy
+	isb
+	ret
+ENDPROC(flush_icache_range)
+ENDPROC(__flush_cache_user_range)
+
+/*
+ *	__flush_kern_dcache_page(kaddr)
+ *
+ *	Ensure that the data held in the page kaddr is written back to the
+ *	page in question.
+ *
+ *	- kaddr   - kernel address
+ *	- size    - size in question
+ */
+ENTRY(__flush_dcache_area)
+	dcache_line_size x2, x3
+	add	x1, x0, x1
+	sub	x3, x2, #1
+	bic	x0, x0, x3
+1:	dc	civac, x0			// clean & invalidate D line / unified line
+	add	x0, x0, x2
+	cmp	x0, x1
+	b.lo	1b
+	dsb	sy
+	ret
+ENDPROC(__flush_dcache_area)