diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 7e84a29dddfa..9112e79079a1 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -52,6 +52,15 @@ regulator-always-on; }; + reg_1p1v: regulator-vdd-core { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; @@ -130,6 +139,18 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <®_1p1v>; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + &pinctrl { adc_pins: adc { pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */ @@ -178,6 +199,18 @@ line-name = "gpio_sd0_pwr_en"; }; + qspi0_pins: qspi0 { + qspi0-data { + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; + power-source = <1800>; + }; + + qspi0-ctrl { + pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; + power-source = <1800>; + }; + }; + /* * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] * The below switch logic can be used to select the device between @@ -243,6 +276,34 @@ }; }; +&sbc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,mt25qu512a", "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x00000000 0x2000000>; + read-only; + }; + user@2000000 { + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; + #if SDHI &sdhi0 { pinctrl-0 = <&sdhi0_pins>; @@ -273,3 +334,18 @@ status = "okay"; }; #endif + +&wdt0 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt1 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt2 { + status = "okay"; + timeout-sec = <60>; +}; |