summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi222
1 files changed, 146 insertions, 76 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 07c8b2c926c0..24d293ef56d7 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -6,8 +6,10 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/sc7180-lpass.h>
/* PMICs depend on spmi_bus label and so must come after SoC */
#include "pm6150.dtsi"
@@ -15,16 +17,18 @@
/ {
thermal-zones {
- charger-thermal {
+ charger_thermal: charger-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
- thermal-sensors = <&pm6150_adc_tm 1>;
+ thermal-sensors = <&pm6150_adc_tm 0>;
trips {
- temperature = <125000>;
- hysteresis = <1000>;
- type = "critical";
+ charger-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
};
};
@@ -45,7 +49,7 @@
/* Increase the size from 2MB to 8MB */
&rmtfs_mem {
- reg = <0x0 0x84400000 0x0 0x800000>;
+ reg = <0x0 0x94600000 0x0 0x800000>;
};
/ {
@@ -243,6 +247,7 @@
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
linux,code = <SW_PEN_INSERTED>;
linux,input-type = <EV_SW>;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
};
};
@@ -255,6 +260,21 @@
#sound-dai-cells = <0>;
};
+ panel: panel {
+ /* Compatible will be filled in per-board */
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+
pwmleds {
compatible = "pwm-leds";
keyboard_backlight: keyboard-backlight {
@@ -264,6 +284,42 @@
max-brightness = <1023>;
};
};
+
+ sound: sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682-max98357a-1mic";
+
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MultiMedia0";
+ reg = <MI2S_PRIMARY>;
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+ };
+
+ sound_multimedia0_codec: codec {
+ sound-dai = <&alc5682 0 /* aif1 */>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "MultiMedia1";
+ reg = <MI2S_SECONDARY>;
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ sound_multimedia1_codec: codec {
+ sound-dai = <&max98357a>;
+ };
+ };
+ };
};
&qfprom {
@@ -551,6 +607,10 @@
};
};
+&camcc {
+ status = "disabled";
+};
+
&dsi0 {
status = "okay";
vdda-supply = <&vdda_mipi_dsi0_1p2>;
@@ -642,14 +702,14 @@ ap_tp_i2c: &i2c7 {
status = "okay";
clock-frequency = <400000>;
- trackpad@15 {
+ trackpad: trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
pinctrl-names = "default";
- pinctrl-0 = <&trackpad_int_1v8_odl>;
+ pinctrl-0 = <&tp_int_odl>;
interrupt-parent = <&tlmm>;
- interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&pp3300_fp_tp>;
@@ -697,6 +757,27 @@ hp_i2c: &i2c9 {
modem-init;
};
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mi2s@0 {
+ reg = <MI2S_PRIMARY>;
+ qcom,playback-sd-lines = <1>;
+ qcom,capture-sd-lines = <0>;
+ };
+
+ mi2s@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+};
+
&mdp {
status = "okay";
};
@@ -716,8 +797,8 @@ hp_i2c: &i2c9 {
&pm6150_adc_tm {
status = "okay";
- charger-thermistor@1 {
- reg = <1>;
+ charger-thermistor@0 {
+ reg = <0>;
io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
@@ -768,17 +849,17 @@ hp_i2c: &i2c9 {
};
&spi0 {
- pinctrl-0 = <&qup_spi0_cs_gpio>;
+ pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
};
&spi6 {
- pinctrl-0 = <&qup_spi6_cs_gpio>;
+ pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
};
ap_spi_fp: &spi10 {
- pinctrl-0 = <&qup_spi10_cs_gpio>;
+ pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
cros_ec_fp: ec@0 {
@@ -787,7 +868,7 @@ ap_spi_fp: &spi10 {
interrupt-parent = <&tlmm>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>;
+ pinctrl-0 = <&fp_to_ap_irq_l>;
spi-max-frequency = <3000000>;
};
};
@@ -812,7 +893,6 @@ ap_spi_fp: &spi10 {
vddrf-supply = <&pp1300_l2c>;
vddch0-supply = <&pp3300_l10c>;
max-speed = <3200000>;
- clocks = <&rpmhcc RPMH_RF_CLK2>;
};
};
@@ -875,6 +955,22 @@ ap_spi_fp: &spi10 {
};
};
+&pri_mi2s_active {
+ pinconf {
+ pins = "gpio53", "gpio54", "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&pri_mi2s_mclk_active {
+ pinconf {
+ pins = "gpio57";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
&qspi_cs0 {
pinconf {
pins = "gpio68";
@@ -1015,6 +1111,14 @@ ap_spi_fp: &spi10 {
};
};
+&sec_mi2s_active {
+ pinconf {
+ pins = "gpio49", "gpio50", "gpio51";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
/* PINCTRL - board-specific pinctrl */
&pm6150_gpio {
@@ -1109,20 +1213,6 @@ ap_spi_fp: &spi10 {
};
};
- dp_hot_plug_det: dp-hot-plug-det {
- pinmux {
- pins = "gpio117";
- function = "dp_hot";
- };
-
- config {
- pins = "gpio117";
- bias-disable;
- input-enable;
- drive-strength = <2>;
- };
- };
-
edp_brij_en: edp-brij-en {
pinmux {
pins = "gpio104";
@@ -1188,48 +1278,6 @@ ap_spi_fp: &spi10 {
};
};
- fpmcu_boot0: fpmcu-boot0 {
- pinmux {
- pins = "gpio10";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio10";
- bias-disable;
- drive-strength = <2>;
- output-low;
- };
- };
-
- fpmcu_sel: fpmcu-sel {
- pinmux {
- pins = "gpio22";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio22";
- bias-disable;
- drive-strength = <2>;
- output-high;
- };
- };
-
- fp_rst_l: fp-rst-l {
- pinmux {
- pins = "gpio5";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio5";
- bias-disable;
- drive-strength = <2>;
- output-high;
- };
- };
-
fp_to_ap_irq_l: fp-to-ap-irq-l {
pinmux {
pins = "gpio4";
@@ -1245,7 +1293,6 @@ ap_spi_fp: &spi10 {
};
};
-
h1_ap_int_odl: h1-ap-int-odl {
pinmux {
pins = "gpio42";
@@ -1339,6 +1386,27 @@ ap_spi_fp: &spi10 {
};
};
+ qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio37";
+ output-high;
+ };
+ };
+
+ qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio62";
+ output-high;
+ };
+ };
+
+ qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio89";
+ output-high;
+ };
+ };
+
qup_uart3_sleep: qup-uart3-sleep {
pinmux {
pins = "gpio38", "gpio39",
@@ -1386,14 +1454,16 @@ ap_spi_fp: &spi10 {
};
};
- trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+ /* Named trackpad_int_1v8_odl on earlier revision schematics */
+ trackpad_int_1v8_odl:
+ tp_int_odl: tp-int-odl {
pinmux {
- pins = "gpio58";
+ pins = "gpio0";
function = "gpio";
};
pinconf {
- pins = "gpio58";
+ pins = "gpio0";
/* Has external pullup */
bias-disable;
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-21 19:50:53 +0300