diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi | 97 |
1 files changed, 95 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi index 73cc3fafa018..3c4b8ca125e3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi @@ -3,14 +3,13 @@ * Copyright 2022 Toradex */ -#include "imx8mm-verdin-dahlia.dtsi" - / { sound_card: sound-card { compatible = "simple-audio-card"; simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <256>; simple-audio-card,name = "imx8mm-nau8822"; simple-audio-card,routing = "Headphones", "LHP", @@ -41,27 +40,121 @@ }; }; +/* Verdin SPI_1 */ +&ecspi2 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + &gpio_expander_21 { status = "okay"; }; /* Verdin I2C_1 */ &i2c4 { + status = "okay"; + /* Audio Codec */ nau8822_1a: audio-codec@1a { compatible = "nuvoton,nau8822"; reg = <0x1a>; + #sound-dai-cells = <0>; }; }; +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* Verdin I2S_1 */ +&sai2 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + /* Verdin UART_1, connector X50 through RS485 transceiver */ &uart2 { linux,rs485-enabled-at-boot-time; rs485-rts-active-low; rs485-rx-during-tx; + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + disable-over-current; + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + disable-over-current; + status = "okay"; }; /* Limit frequency on dev board due to long traces and bad signal integrity */ &usdhc2 { max-frequency = <100000000>; + status = "okay"; }; |