diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-axg.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 724ee179b316..ba1c6dfdc4b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-axg-reset.h> +#include <dt-bindings/power/meson-axg-power.h> / { compatible = "amlogic,meson-axg"; @@ -171,6 +172,58 @@ #size-cells = <2>; ranges; + pcieA: pcie@f9800000 { + compatible = "amlogic,axg-pcie", "snps,dw-pcie"; + reg = <0x0 0xf9800000 0x0 0x400000>, + <0x0 0xff646000 0x0 0x2000>, + <0x0 0xf9f00000 0x0 0x100000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>; + clock-names = "general", "pclk", "port"; + resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>; + reset-names = "port", "apb"; + num-lanes = <1>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + + pcieB: pcie@fa000000 { + compatible = "amlogic,axg-pcie", "snps,dw-pcie"; + reg = <0x0 0xfa000000 0x0 0x400000>, + <0x0 0xff648000 0x0 0x2000>, + <0x0 0xfa400000 0x0 0x100000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>; + clock-names = "general", "pclk", "port"; + resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>; + reset-names = "port", "apb"; + num-lanes = <1>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + usb: usb@ffe09080 { compatible = "amlogic,meson-axg-usb-ctrl"; reg = <0x0 0xffe09080 0x0 0x20>; @@ -229,9 +282,19 @@ tx-fifo-depth = <2048>; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; + power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>; status = "disabled"; }; + pcie_phy: phy@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0x0 0xff644000 0x0 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + phys = <&mipi_pcie_analog_dphy>; + phy-names = "analog"; + #phy-cells = <0>; + }; + pdm: audio-controller@ff632000 { compatible = "amlogic,axg-pdm"; reg = <0x0 0xff632000 0x0 0x34>; @@ -1159,6 +1222,52 @@ clocks = <&xtal>; clock-names = "xtal"; }; + + pwrc: power-controller { + compatible = "amlogic,meson-axg-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", + "vencl", "vid_lock"; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <250000000>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + + mipi_pcie_analog_dphy: phy { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + #phy-cells = <0>; + status = "disabled"; + }; }; }; @@ -1171,6 +1280,19 @@ #mbox-cells = <1>; }; + mipi_dphy: phy@ff640000 { + compatible = "amlogic,axg-mipi-dphy"; + reg = <0x0 0xff640000 0x0 0x100>; + clocks = <&clkc CLKID_MIPI_DSI_PHY>; + clock-names = "pclk"; + resets = <&reset RESET_MIPI_PHY>; + reset-names = "phy"; + phys = <&mipi_pcie_analog_dphy>; + phy-names = "analog"; + #phy-cells = <0>; + status = "disabled"; + }; + audio: bus@ff642000 { compatible = "simple-bus"; reg = <0x0 0xff642000 0x0 0x2000>; @@ -1605,6 +1727,15 @@ }; }; + ge2d: ge2d@ff940000 { + compatible = "amlogic,axg-ge2d"; + reg = <0x0 0xff940000 0x0 0x10000>; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_VAPB>; + resets = <&reset RESET_GE2D>; + reset-names = "core"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; reg = <0x0 0xffc01000 0 0x1000>, |