summaryrefslogtreecommitdiff
path: root/arch/arm/mach-versatile/integrator_ap.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-versatile/integrator_ap.c')
-rw-r--r--arch/arm/mach-versatile/integrator_ap.c200
1 files changed, 200 insertions, 0 deletions
diff --git a/arch/arm/mach-versatile/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c
new file mode 100644
index 000000000000..44a69cc69376
--- /dev/null
+++ b/arch/arm/mach-versatile/integrator_ap.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2000-2003 Deep Blue Solutions Ltd
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/syscore_ops.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/termios.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "integrator-hardware.h"
+#include "integrator-cm.h"
+#include "integrator.h"
+
+/* Regmap to the AP system controller */
+static struct regmap *ap_syscon_map;
+
+/*
+ * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
+ * is the (PA >> 12).
+ *
+ * Setup a VA for the Integrator interrupt controller (for header #0,
+ * just for now).
+ */
+#define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE)
+
+/*
+ * Logical Physical
+ * f1400000 14000000 Interrupt controller
+ * f1600000 16000000 UART 0
+ */
+
+static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init ap_map_io(void)
+{
+ iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+}
+
+#ifdef CONFIG_PM
+static unsigned long ic_irq_enable;
+
+static int irq_suspend(void)
+{
+ ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
+ return 0;
+}
+
+static void irq_resume(void)
+{
+ /* disable all irq sources */
+ cm_clear_irqs();
+ writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
+ writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
+
+ writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET);
+}
+#else
+#define irq_suspend NULL
+#define irq_resume NULL
+#endif
+
+static struct syscore_ops irq_syscore_ops = {
+ .suspend = irq_suspend,
+ .resume = irq_resume,
+};
+
+static int __init irq_syscore_init(void)
+{
+ register_syscore_ops(&irq_syscore_ops);
+
+ return 0;
+}
+
+device_initcall(irq_syscore_init);
+
+/*
+ * For the PL010 found in the Integrator/AP some of the UART control is
+ * implemented in the system controller and accessed using a callback
+ * from the driver.
+ */
+static void integrator_uart_set_mctrl(struct amba_device *dev,
+ void __iomem *base, unsigned int mctrl)
+{
+ unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+ u32 phybase = dev->res.start;
+ int ret;
+
+ if (phybase == INTEGRATOR_UART0_BASE) {
+ /* UART0 */
+ rts_mask = 1 << 4;
+ dtr_mask = 1 << 5;
+ } else {
+ /* UART1 */
+ rts_mask = 1 << 6;
+ dtr_mask = 1 << 7;
+ }
+
+ if (mctrl & TIOCM_RTS)
+ ctrlc |= rts_mask;
+ else
+ ctrls |= rts_mask;
+
+ if (mctrl & TIOCM_DTR)
+ ctrlc |= dtr_mask;
+ else
+ ctrls |= dtr_mask;
+
+ ret = regmap_write(ap_syscon_map,
+ INTEGRATOR_SC_CTRLS_OFFSET,
+ ctrls);
+ if (ret)
+ pr_err("MODEM: unable to write PL010 UART CTRLS\n");
+
+ ret = regmap_write(ap_syscon_map,
+ INTEGRATOR_SC_CTRLC_OFFSET,
+ ctrlc);
+ if (ret)
+ pr_err("MODEM: unable to write PL010 UART CRTLC\n");
+}
+
+struct amba_pl010_data ap_uart_data = {
+ .set_mctrl = integrator_uart_set_mctrl,
+};
+
+void __init ap_init_early(void)
+{
+}
+
+static void __init ap_init_irq_of(void)
+{
+ cm_init();
+ irqchip_init();
+}
+
+/* For the Device Tree, add in the UART callbacks as AUXDATA */
+static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+ "uart0", &ap_uart_data),
+ OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+ "uart1", &ap_uart_data),
+ { /* sentinel */ },
+};
+
+static const struct of_device_id ap_syscon_match[] = {
+ { .compatible = "arm,integrator-ap-syscon"},
+ { },
+};
+
+static void __init ap_init_of(void)
+{
+ struct device_node *syscon;
+
+ of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
+
+ syscon = of_find_matching_node(NULL, ap_syscon_match);
+ if (!syscon)
+ return;
+ ap_syscon_map = syscon_node_to_regmap(syscon);
+ if (IS_ERR(ap_syscon_map)) {
+ pr_crit("could not find Integrator/AP system controller\n");
+ return;
+ }
+}
+
+static const char * ap_dt_board_compat[] = {
+ "arm,integrator-ap",
+ NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
+ .reserve = integrator_reserve,
+ .map_io = ap_map_io,
+ .init_early = ap_init_early,
+ .init_irq = ap_init_irq_of,
+ .init_machine = ap_init_of,
+ .dt_compat = ap_dt_board_compat,
+MACHINE_END