diff options
Diffstat (limited to 'arch/arm/mach-sa1100/include/mach/simpad.h')
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/simpad.h | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h deleted file mode 100644 index d53d680de3d9..000000000000 --- a/arch/arm/mach-sa1100/include/mach/simpad.h +++ /dev/null @@ -1,159 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-sa1100/include/mach/simpad.h - * - * based of assabet.h same as HUW_Webpanel - * - * This file contains the hardware specific definitions for SIMpad - * - * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch> - */ - -#ifndef __ASM_ARCH_SIMPAD_H -#define __ASM_ARCH_SIMPAD_H - - -#define GPIO_UART1_RTS GPIO_GPIO14 -#define GPIO_UART1_DTR GPIO_GPIO7 -#define GPIO_UART1_CTS GPIO_GPIO8 -#define GPIO_UART1_DCD GPIO_GPIO23 -#define GPIO_UART1_DSR GPIO_GPIO6 - -#define GPIO_UART3_RTS GPIO_GPIO12 -#define GPIO_UART3_DTR GPIO_GPIO16 -#define GPIO_UART3_CTS GPIO_GPIO13 -#define GPIO_UART3_DCD GPIO_GPIO18 -#define GPIO_UART3_DSR GPIO_GPIO17 - -#define GPIO_POWER_BUTTON GPIO_GPIO0 -#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */ - -#define IRQ_UART1_CTS IRQ_GPIO15 -#define IRQ_UART1_DCD GPIO_GPIO23 -#define IRQ_UART1_DSR GPIO_GPIO6 -#define IRQ_UART3_CTS GPIO_GPIO13 -#define IRQ_UART3_DCD GPIO_GPIO18 -#define IRQ_UART3_DSR GPIO_GPIO17 - -#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22 -#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0 - - -/*--- PCMCIA ---*/ -#define GPIO_CF_CD 24 -#define GPIO_CF_IRQ 1 - -/*--- SmartCard ---*/ -#define GPIO_SMART_CARD GPIO_GPIO10 -#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10 - -/*--- ucb1x00 GPIO ---*/ -#define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1) -#define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE) -#define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1) -#define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2) -#define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3) -#define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4) -#define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5) -#define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6) -#define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7) -#define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8) -#define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9) - -/*--- CS3 Latch ---*/ -#define SIMPAD_CS3_GPIO_BASE (GPIO_MAX + 11) -#define SIMPAD_CS3_VCC_5V_EN (SIMPAD_CS3_GPIO_BASE) -#define SIMPAD_CS3_VCC_3V_EN (SIMPAD_CS3_GPIO_BASE + 1) -#define SIMPAD_CS3_EN1 (SIMPAD_CS3_GPIO_BASE + 2) -#define SIMPAD_CS3_EN0 (SIMPAD_CS3_GPIO_BASE + 3) -#define SIMPAD_CS3_DISPLAY_ON (SIMPAD_CS3_GPIO_BASE + 4) -#define SIMPAD_CS3_PCMCIA_BUFF_DIS (SIMPAD_CS3_GPIO_BASE + 5) -#define SIMPAD_CS3_MQ_RESET (SIMPAD_CS3_GPIO_BASE + 6) -#define SIMPAD_CS3_PCMCIA_RESET (SIMPAD_CS3_GPIO_BASE + 7) -#define SIMPAD_CS3_DECT_POWER_ON (SIMPAD_CS3_GPIO_BASE + 8) -#define SIMPAD_CS3_IRDA_SD (SIMPAD_CS3_GPIO_BASE + 9) -#define SIMPAD_CS3_RS232_ON (SIMPAD_CS3_GPIO_BASE + 10) -#define SIMPAD_CS3_SD_MEDIAQ (SIMPAD_CS3_GPIO_BASE + 11) -#define SIMPAD_CS3_LED2_ON (SIMPAD_CS3_GPIO_BASE + 12) -#define SIMPAD_CS3_IRDA_MODE (SIMPAD_CS3_GPIO_BASE + 13) -#define SIMPAD_CS3_ENABLE_5V (SIMPAD_CS3_GPIO_BASE + 14) -#define SIMPAD_CS3_RESET_SIMCARD (SIMPAD_CS3_GPIO_BASE + 15) - -#define SIMPAD_CS3_PCMCIA_BVD1 (SIMPAD_CS3_GPIO_BASE + 16) -#define SIMPAD_CS3_PCMCIA_BVD2 (SIMPAD_CS3_GPIO_BASE + 17) -#define SIMPAD_CS3_PCMCIA_VS1 (SIMPAD_CS3_GPIO_BASE + 18) -#define SIMPAD_CS3_PCMCIA_VS2 (SIMPAD_CS3_GPIO_BASE + 19) -#define SIMPAD_CS3_LOCK_IND (SIMPAD_CS3_GPIO_BASE + 20) -#define SIMPAD_CS3_CHARGING_STATE (SIMPAD_CS3_GPIO_BASE + 21) -#define SIMPAD_CS3_PCMCIA_SHORT (SIMPAD_CS3_GPIO_BASE + 22) -#define SIMPAD_CS3_GPIO_23 (SIMPAD_CS3_GPIO_BASE + 23) - -#define CS3_BASE IOMEM(0xf1000000) - -long simpad_get_cs3_ro(void); -long simpad_get_cs3_shadow(void); -void simpad_set_cs3_bit(int value); -void simpad_clear_cs3_bit(int value); - -#define VCC_5V_EN 0x0001 /* For 5V PCMCIA */ -#define VCC_3V_EN 0x0002 /* FOR 3.3V PCMCIA */ -#define EN1 0x0004 /* This is only for EPROM's */ -#define EN0 0x0008 /* Both should be enable for 3.3V or 5V */ -#define DISPLAY_ON 0x0010 -#define PCMCIA_BUFF_DIS 0x0020 -#define MQ_RESET 0x0040 -#define PCMCIA_RESET 0x0080 -#define DECT_POWER_ON 0x0100 -#define IRDA_SD 0x0200 /* Shutdown for powersave */ -#define RS232_ON 0x0400 -#define SD_MEDIAQ 0x0800 /* Shutdown for powersave */ -#define LED2_ON 0x1000 -#define IRDA_MODE 0x2000 /* Fast/Slow IrDA mode */ -#define ENABLE_5V 0x4000 /* Enable 5V circuit */ -#define RESET_SIMCARD 0x8000 - -#define PCMCIA_BVD1 0x01 -#define PCMCIA_BVD2 0x02 -#define PCMCIA_VS1 0x04 -#define PCMCIA_VS2 0x08 -#define LOCK_IND 0x10 -#define CHARGING_STATE 0x20 -#define PCMCIA_SHORT 0x40 - -/*--- Battery ---*/ -struct simpad_battery { - unsigned char ac_status; /* line connected yes/no */ - unsigned char status; /* battery loading yes/no */ - unsigned char percentage; /* percentage loaded */ - unsigned short life; /* life till empty */ -}; - -/* These should match the apm_bios.h definitions */ -#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00 -#define SIMPAD_AC_STATUS_AC_ONLINE 0x01 -#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */ -#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff - -/* These bitfields are rarely "or'd" together */ -#define SIMPAD_BATT_STATUS_HIGH 0x01 -#define SIMPAD_BATT_STATUS_LOW 0x02 -#define SIMPAD_BATT_STATUS_CRITICAL 0x04 -#define SIMPAD_BATT_STATUS_CHARGING 0x08 -#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10 -#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */ -#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */ -#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */ -#define SIMPAD_BATT_STATUS_NOBATT 0x80 -#define SIMPAD_BATT_STATUS_UNKNOWN 0xff - -extern int simpad_get_battery(struct simpad_battery* ); - -#endif // __ASM_ARCH_SIMPAD_H - - - - - - - - |