diff options
Diffstat (limited to 'arch/arm/mach-pxa/e750.c')
| -rw-r--r-- | arch/arm/mach-pxa/e750.c | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c deleted file mode 100644 index af83caa52dd4..000000000000 --- a/arch/arm/mach-pxa/e750.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/mfd/tc6393xb.h> - -#include <video/w100fb.h> - -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/pxa25x.h> -#include <mach/eseries-gpio.h> -#include <mach/udc.h> -#include <mach/irda.h> -#include <mach/irqs.h> -#include <mach/audio.h> - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* ---------------------- E750 LCD definitions -------------------- */ - -static struct w100_gen_regs e750_lcd_regs = { - .lcd_format = 0x00008003, - .lcdd_cntl1 = 0x00000000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x00fff003, - .genlcd_cntl2 = 0x003c0f03, - .genlcd_cntl3 = 0x000143aa, -}; - -static struct w100_mode e750_lcd_mode = { - .xres = 240, - .yres = 320, - .left_margin = 21, - .right_margin = 22, - .upper_margin = 5, - .lower_margin = 4, - .crtc_ss = 0x80150014, - .crtc_ls = 0x8014000d, - .crtc_gs = 0xc1000005, - .crtc_vpos_gs = 0x00020147, - .crtc_rev = 0x0040010a, - .crtc_dclk = 0xa1700030, - .crtc_gclk = 0x80cc0015, - .crtc_goe = 0x80cc0015, - .crtc_ps1_active = 0x61060017, - .pll_freq = 57, - .pixclk_divider = 4, - .pixclk_divider_rotated = 4, - .pixclk_src = CLK_SRC_XTAL, - .sysclk_divider = 1, - .sysclk_src = CLK_SRC_PLL, -}; - -static struct w100_gpio_regs e750_w100_gpio_info = { - .init_data1 = 0x01192f1b, - .gpio_dir1 = 0xd5ffdeff, - .gpio_oe1 = 0x000020bf, - .init_data2 = 0x010f010f, - .gpio_dir2 = 0xffffffff, - .gpio_oe2 = 0x000001cf, -}; - -static struct w100fb_mach_info e750_fb_info = { - .modelist = &e750_lcd_mode, - .num_modes = 1, - .regs = &e750_lcd_regs, - .gpio = &e750_w100_gpio_info, - .xtal_freq = 14318000, - .xtal_dbl = 1, -}; - -static struct resource e750_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device e750_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e750_fb_info, - }, - .num_resources = ARRAY_SIZE(e750_fb_resources), - .resource = e750_fb_resources, -}; - -/* -------------------- e750 MFP parameters -------------------- */ - -static unsigned long e750_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO79_nCS_3, /* CS3 - IMAGEON */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO11_3_6MHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - - /* TMIO controller */ - GPIO19_GPIO, /* t7l66xb #PCLR */ - GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ - - /* UDC */ - GPIO13_GPIO, - GPIO3_GPIO, - - /* IrDA */ - GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, - - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - - /* Audio power control */ - GPIO4_GPIO, /* Headphone amp power */ - GPIO7_GPIO, /* Speaker amp power */ - GPIO37_GPIO, /* Headphone detect */ - - /* PC Card */ - GPIO8_GPIO, /* CD0 */ - GPIO44_GPIO, /* CD1 */ - GPIO11_GPIO, /* IRQ0 */ - GPIO6_GPIO, /* IRQ1 */ - GPIO27_GPIO, /* RST0 */ - GPIO24_GPIO, /* RST1 */ - GPIO20_GPIO, /* PWR0 */ - GPIO23_GPIO, /* PWR1 */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - -/* ----------------- e750 tc6393xb parameters ------------------ */ - -static struct tc6393xb_platform_data e750_tc6393xb_info = { - .irq_base = IRQ_BOARD_START, - .scr_pll2cr = 0x0cc1, - .scr_gper = 0, - .gpio_base = -1, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, - .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, -}; - -static struct platform_device e750_tc6393xb_device = { - .name = "tc6393xb", - .id = -1, - .dev = { - .platform_data = &e750_tc6393xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e750_fb_device, - &e750_tc6393xb_device, -}; - -static void __init e750_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, - "GPIO11_CLK", NULL), - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); - pxa_set_ac97_info(NULL); - pxa_set_ficp_info(&e7xx_ficp_platform_data); -} - -MACHINE_START(E750, "Toshiba e750") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e750_init, - .timer = &pxa_timer, -MACHINE_END - |