diff options
Diffstat (limited to 'arch/arm/mach-omap1')
47 files changed, 92 insertions, 5580 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 538a960257cc..8df9a4de0e79 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN depends on ATAGS + select ARCH_OMAP select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select CLKSRC_MMIO @@ -18,19 +19,6 @@ menu "TI OMAP1 specific features" comment "OMAP Core Type" -config ARCH_OMAP730 - depends on ARCH_MULTI_V5 - bool "OMAP730 Based System" - select ARCH_OMAP_OTG - select CPU_ARM926T - select OMAP_MPU_TIMER - -config ARCH_OMAP850 - depends on ARCH_MULTI_V5 - bool "OMAP850 Based System" - select ARCH_OMAP_OTG - select CPU_ARM926T - config ARCH_OMAP15XX depends on ARCH_MULTI_V4T default y @@ -45,10 +33,6 @@ config ARCH_OMAP16XX select CPU_ARM926T select OMAP_DM_TIMER -config ARCH_OMAP1_ANY - select ARCH_OMAP - def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX - config ARCH_OMAP bool @@ -129,37 +113,6 @@ config ARCH_OMAP_OTG comment "OMAP Board Type" -config MACH_OMAP_INNOVATOR - bool "TI Innovator" - depends on ARCH_OMAP15XX || ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - TI OMAP 1510 or 1610 Innovator board support. Say Y here if you - have such a board. - -config MACH_OMAP_H2 - bool "TI H2 Support" - depends on ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - TI OMAP 1610/1611B H2 board support. Say Y here if you have such - a board. - -config MACH_OMAP_H3 - bool "TI H3 Support" - depends on ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - TI OMAP 1710 H3 board support. Say Y here if you have such - a board. - -config MACH_HERALD - bool "HTC Herald" - depends on ARCH_OMAP850 - depends on UNUSED_BOARD_FILES - help - HTC Herald smartphone support (AKA T-Mobile Wing, ...) - config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP16XX @@ -167,31 +120,6 @@ config MACH_OMAP_OSK TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. -config OMAP_OSK_MISTRAL - bool "Mistral QVGA board Support" - depends on MACH_OMAP_OSK - depends on UNUSED_BOARD_FILES - help - The OSK supports an optional add-on board with a Quarter-VGA - touchscreen, PDA-ish buttons, a resume button, bicolor LED, - and camera connector. Say Y here if you have this board. - -config MACH_OMAP_PERSEUS2 - bool "TI Perseus2" - depends on ARCH_OMAP730 - depends on UNUSED_BOARD_FILES - help - Support for TI OMAP 730 Perseus2 board. Say Y here if you have such - a board. - -config MACH_OMAP_FSAMPLE - bool "TI F-Sample" - depends on ARCH_OMAP730 - depends on UNUSED_BOARD_FILES - help - Support for TI OMAP 850 F-Sample board. Say Y here if you have such - a board. - config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP15XX @@ -201,26 +129,6 @@ config MACH_OMAP_PALMTE http://palmtelinux.sourceforge.net/ for more information. Say Y here if you have this PDA model, say N otherwise. -config MACH_OMAP_PALMZ71 - bool "Palm Zire71" - depends on ARCH_OMAP15XX - depends on UNUSED_BOARD_FILES - help - Support for the Palm Zire71 PDA. To boot the kernel, - you'll need a PalmOS compatible bootloader; check out - http://hackndev.com/palm/z71 for more information. - Say Y here if you have such a PDA, say N otherwise. - -config MACH_OMAP_PALMTT - bool "Palm Tungsten|T" - depends on ARCH_OMAP15XX - depends on UNUSED_BOARD_FILES - help - Support for the Palm Tungsten|T PDA. To boot the kernel, you'll - need a PalmOS compatible bootloader (Garux); check out - http://garux.sourceforge.net/ for more information. - Say Y here if you have this PDA model, say N otherwise. - config MACH_SX1 bool "Siemens SX1" depends on ARCH_OMAP15XX @@ -252,16 +160,6 @@ config MACH_AMS_DELTA Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -config MACH_OMAP_GENERIC - bool "Generic OMAP board" - depends on ARCH_OMAP15XX || ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - Support for generic OMAP-1510, 1610 or 1710 board with - no FPGA. Can be used as template for porting Linux to - custom OMAP boards. Say Y here if you have a custom - board. - endmenu endif diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 506074b86333..d9e251ea4773 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,8 +3,6 @@ # Makefile for the linux kernel. # -ifdef CONFIG_ARCH_OMAP1_ANY - # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ serial.o devices.o dma.o omap-dma.o fb.o @@ -31,33 +29,13 @@ usb-fs-$(CONFIG_USB_SUPPORT) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o \ - board-nand.o -obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o -obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o -obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o board-nand.o -obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ - board-nand.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o -obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o -obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \ ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o -obj-$(CONFIG_MACH_HERALD) += board-htcherald.o - -ifeq ($(CONFIG_ARCH_OMAP15XX),y) -# Innovator-1510 FPGA -obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o -endif # GPIO -obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o -obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o - -endif diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 651c28d81132..0f67ac4c6fd2 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -871,7 +871,7 @@ static void __init ams_delta_init_late(void) static void __init ams_delta_map_io(void) { - omap15xx_map_io(); + omap1_map_io(); iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); } diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c deleted file mode 100644 index f21e15c7b973..000000000000 --- a/arch/arm/mach-omap1/board-fsample.c +++ /dev/null @@ -1,366 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-fsample.c - * - * Modified from board-perseus2.c - * - * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> - * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/soc/ti/omap1-io.h> -#include <linux/platform_data/keypad-omap.h> -#include "tc.h" - -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -/* fsample is pretty close to p2-sample */ - -#define fsample_cpld_read(reg) __raw_readb(reg) -#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) - -#define FSAMPLE_CPLD_BASE 0xE8100000 -#define FSAMPLE_CPLD_SIZE SZ_4K -#define FSAMPLE_CPLD_START 0x05080000 - -#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) -#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) -#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) -#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) - -#define FSAMPLE_CPLD_BIT_BT_RESET 0 -#define FSAMPLE_CPLD_BIT_LCD_RESET 1 -#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 -#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 -#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 -#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 -#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 -#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 -#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 -#define FSAMPLE_CPLD_BIT_OTG_RESET 9 - -#define fsample_cpld_set(bit) \ - fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) - -#define fsample_cpld_clear(bit) \ - fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) - -static const unsigned int fsample_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_LEFT), - KEY(3, 0, KEY_DOWN), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_F10), - KEY(1, 1, KEY_SEND), - KEY(2, 1, KEY_END), - KEY(3, 1, KEY_VOLUMEDOWN), - KEY(4, 1, KEY_VOLUMEUP), - KEY(5, 1, KEY_RECORD), - KEY(0, 2, KEY_F9), - KEY(1, 2, KEY_3), - KEY(2, 2, KEY_6), - KEY(3, 2, KEY_9), - KEY(4, 2, KEY_KPDOT), - KEY(0, 3, KEY_BACK), - KEY(1, 3, KEY_2), - KEY(2, 3, KEY_5), - KEY(3, 3, KEY_8), - KEY(4, 3, KEY_0), - KEY(5, 3, KEY_KPSLASH), - KEY(0, 4, KEY_HOME), - KEY(1, 4, KEY_1), - KEY(2, 4, KEY_4), - KEY(3, 4, KEY_7), - KEY(4, 4, KEY_KPASTERISK), - KEY(5, 4, KEY_POWER), -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ - .end = H2P2_DBG_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_7XX_MPU_EXT_NIRQ, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static void __init fsample_init_smc91x(void) -{ - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - }, -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -#define FSAMPLE_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - }, -}; - -static struct resource nand_resource = { - .start = OMAP_CS3_PHYS, - .end = OMAP_CS3_PHYS + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_data, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data fsample_keymap_data = { - .keymap = fsample_keymap, - .keymap_size = ARRAY_SIZE(fsample_keymap), -}; - -static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &fsample_keymap_data, - .delay = 4, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &kp_device, -}; - -static const struct omap_lcd_config fsample_lcd_config = { - .ctrl_name = "internal", -}; - -static void __init omap_fsample_init(void) -{ - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, - OMAP7XX_IO_CONF_9); - - fsample_init_smc91x(); - - BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* Mux pins for keypad */ - omap_cfg_reg(E2_7XX_KBR0); - omap_cfg_reg(J7_7XX_KBR1); - omap_cfg_reg(E1_7XX_KBR2); - omap_cfg_reg(F3_7XX_KBR3); - omap_cfg_reg(D2_7XX_KBR4); - omap_cfg_reg(C2_7XX_KBC0); - omap_cfg_reg(D3_7XX_KBC1); - omap_cfg_reg(E4_7XX_KBC2); - omap_cfg_reg(F4_7XX_KBC3); - omap_cfg_reg(E3_7XX_KBC4); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&fsample_lcd_config); -} - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc omap_fsample_io_desc[] __initdata = { - { - .virtual = H2P2_DBG_FPGA_BASE, - .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), - .length = H2P2_DBG_FPGA_SIZE, - .type = MT_DEVICE - }, - { - .virtual = FSAMPLE_CPLD_BASE, - .pfn = __phys_to_pfn(FSAMPLE_CPLD_START), - .length = FSAMPLE_CPLD_SIZE, - .type = MT_DEVICE - } -}; - -static void __init omap_fsample_map_io(void) -{ - omap15xx_map_io(); - iotable_init(omap_fsample_io_desc, - ARRAY_SIZE(omap_fsample_io_desc)); -} - -MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") -/* Maintainer: Brian Swetland <swetland@google.com> */ - .atag_offset = 0x100, - .map_io = omap_fsample_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_fsample_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c deleted file mode 100644 index 3b2bcaf4bb01..000000000000 --- a/arch/arm/mach-omap1/board-generic.c +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-generic.c - * - * Modified from board-innovator1510.c - * - * Code for generic OMAP board. Should work on many OMAP systems where - * the device drivers take care of all the necessary hardware initialization. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "hardware.h" -#include "mux.h" -#include "usb.h" -#include "common.h" - -/* assume no Mini-AB port */ - -#ifdef CONFIG_ARCH_OMAP15XX -static struct omap_usb_config generic1510_usb_config __initdata = { - .register_host = 1, - .register_dev = 1, - .hmc_mode = 16, - .pins[0] = 3, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -static struct omap_usb_config generic1610_usb_config __initdata = { -#ifdef CONFIG_USB_OTG - .otg = 1, -#endif - .register_host = 1, - .register_dev = 1, - .hmc_mode = 16, - .pins[0] = 6, -}; -#endif - -static void __init omap_generic_init(void) -{ -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - omap1_usb_init(&generic1510_usb_config); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (!cpu_is_omap1510()) { - omap1_usb_init(&generic1610_usb_config); - } -#endif - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); -} - -MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") - /* Maintainer: Tony Lindgren <tony@atomide.com> */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_generic_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c deleted file mode 100644 index 06c5404078aa..000000000000 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h2-mmc.c - * - * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT - * Author: Felipe Balbi <felipe.lima@indt.org.br> - * - * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: - * Copyright (C) 2006 Nokia Corporation - */ -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/mfd/tps65010.h> - -#include "board-h2.h" -#include "mmc.h" - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); - return 0; -} - -static int mmc_late_init(struct device *dev) -{ - int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); - if (ret < 0) - return ret; - - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - - return ret; -} - -static void mmc_cleanup(struct device *dev) -{ - gpio_free(H2_TPS_GPIO_MMC_PWR_EN); -} - -/* - * H2 could use the following functions tested: - * - mmc_get_cover_state that uses OMAP_MPUIO(1) - * - mmc_get_wp that uses OMAP_MPUIO(3) - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .init = mmc_late_init, - .cleanup = mmc_cleanup, - .slots[0] = { - .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -void __init h2_mmc_init(void) -{ - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC); -} - -#else - -void __init h2_mmc_init(void) -{ -} - -#endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c deleted file mode 100644 index f28a4c3ea501..000000000000 --- a/arch/arm/mach-omap1/board-h2.c +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h2.c - * - * Board specific inits for OMAP-1610 H2 - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * H2 specific changes and cleanup - * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> - */ -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/mfd/tps65010.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/omap-dma.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/leds.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "usb.h" -#include "common.h" -#include "board-h2.h" - -/* The first 16 SoC GPIO lines are on this GPIO chip */ -#define OMAP_GPIO_LABEL "gpio-0-15" - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define OMAP1610_ETHR_START 0x04000300 - -static const unsigned int h2_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_3), - KEY(3, 0, KEY_F10), - KEY(4, 0, KEY_F5), - KEY(5, 0, KEY_9), - KEY(0, 1, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(2, 1, KEY_2), - KEY(3, 1, KEY_F9), - KEY(4, 1, KEY_F7), - KEY(5, 1, KEY_0), - KEY(0, 2, KEY_ENTER), - KEY(1, 2, KEY_6), - KEY(2, 2, KEY_1), - KEY(3, 2, KEY_F2), - KEY(4, 2, KEY_F6), - KEY(5, 2, KEY_HOME), - KEY(0, 3, KEY_8), - KEY(1, 3, KEY_5), - KEY(2, 3, KEY_F12), - KEY(3, 3, KEY_F3), - KEY(4, 3, KEY_F8), - KEY(5, 3, KEY_END), - KEY(0, 4, KEY_7), - KEY(1, 4, KEY_4), - KEY(2, 4, KEY_F11), - KEY(3, 4, KEY_F1), - KEY(4, 4, KEY_F4), - KEY(5, 4, KEY_ESC), - KEY(0, 5, KEY_F13), - KEY(1, 5, KEY_F14), - KEY(2, 5, KEY_F15), - KEY(3, 5, KEY_F16), - KEY(4, 5, KEY_SLEEP), -}; - -static struct mtd_partition h2_nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data h2_nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = h2_nor_partitions, - .nr_parts = ARRAY_SIZE(h2_nor_partitions), -}; - -static struct resource h2_nor_resource = { - /* This is on CS3, wherever it's mapped */ - .flags = IORESOURCE_MEM, -}; - -static struct platform_device h2_nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &h2_nor_data, - }, - .num_resources = 1, - .resource = &h2_nor_resource, -}; - -static struct mtd_partition h2_nand_partitions[] = { -#if 0 - /* REVISIT: enable these partitions if you make NAND BOOT - * work on your H2 (rev C or newer); published versions of - * x-load only support P2 and H3. - */ - { - .name = "xloader", - .offset = 0, - .size = 64 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 192 * 1024, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 2 * SZ_1M, - }, -#endif - { - .name = "filesystem", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define H2_NAND_RB_GPIO_PIN 62 - -static int h2_nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(H2_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data h2_nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(h2_nand_partitions), - .partitions = h2_nand_partitions, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = h2_nand_dev_ready, - }, -}; - -static struct resource h2_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device h2_nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &h2_nand_platdata, - }, - .num_resources = 1, - .resource = &h2_nand_resource, -}; - -static struct smc91x_platdata h2_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource h2_smc91x_resources[] = { - [0] = { - .start = OMAP1610_ETHR_START, /* Physical */ - .end = OMAP1610_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device h2_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &h2_smc91x_info, - }, - .num_resources = ARRAY_SIZE(h2_smc91x_resources), - .resource = h2_smc91x_resources, -}; - -static struct resource h2_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data h2_keymap_data = { - .keymap = h2_keymap, - .keymap_size = ARRAY_SIZE(h2_keymap), -}; - -static struct omap_kp_platform_data h2_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &h2_keymap_data, - .rep = true, - .delay = 9, - .dbounce = true, -}; - -static struct platform_device h2_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h2_kp_data, - }, - .num_resources = ARRAY_SIZE(h2_kp_resources), - .resource = h2_kp_resources, -}; - -static const struct gpio_led h2_gpio_led_pins[] = { - { - .name = "h2:red", - .default_trigger = "heartbeat", - .gpio = 3, - }, - { - .name = "h2:green", - .default_trigger = "cpu0", - .gpio = OMAP_MPUIO(4), - }, -}; - -static struct gpio_led_platform_data h2_gpio_led_data = { - .leds = h2_gpio_led_pins, - .num_leds = ARRAY_SIZE(h2_gpio_led_pins), -}; - -static struct platform_device h2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &h2_gpio_led_data, - }, -}; - -static struct platform_device *h2_devices[] __initdata = { - &h2_nor_device, - &h2_nand_device, - &h2_smc91x_device, - &h2_kp_device, - &h2_gpio_leds, -}; - -static void __init h2_init_smc91x(void) -{ - if (gpio_request(0, "SMC91x irq") < 0) { - printk("Error requesting gpio 0 for smc91x irq\n"); - return; - } -} - -static int tps_setup(struct i2c_client *client, void *context) -{ - if (!IS_BUILTIN(CONFIG_TPS65010)) - return -ENOSYS; - - tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | - TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); - - return 0; -} - -static struct tps65010_board tps_board = { - .base = H2_TPS_GPIO_BASE, - .outmask = 0x0f, - .setup = tps_setup, -}; - -static struct i2c_board_info __initdata h2_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .platform_data = &tps_board, - }, { - .type = "isp1301_omap", - .addr = 0x2d, - .dev_name = "isp1301", - }, -}; - -static struct gpiod_lookup_table isp1301_gpiod_table = { - .dev_id = "isp1301", - .table = { - /* Active low since the irq triggers on falling edge */ - GPIO_LOOKUP(OMAP_GPIO_LABEL, 2, - NULL, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct omap_usb_config h2_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ - /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config h2_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init h2_init(void) -{ - h2_init_smc91x(); - - /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped - * to address 0 by a dip switch), NAND on CS2B. The NAND driver will - * notice whether a NAND chip is enabled at probe time. - * - * FIXME revC boards (and H3) support NAND-boot, with a dip switch to - * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try - * detecting that in code here, to avoid probing every possible flash - * configuration... - */ - h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); - h2_nor_resource.end += SZ_32M - 1; - - h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; - h2_nand_resource.end += SZ_4K - 1; - BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(H2_NAND_RB_GPIO_PIN); - - gpiod_add_lookup_table(&isp1301_gpiod_table); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* MMC: card detect and WP */ - /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ - omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ - - /* Mux pins for keypad */ - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - - /* GPIO based LEDs */ - omap_cfg_reg(P18_1610_GPIO3); - omap_cfg_reg(MPUIO4); - - h2_smc91x_resources[1].start = gpio_to_irq(0); - h2_smc91x_resources[1].end = gpio_to_irq(0); - platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); - omap_serial_init(); - - /* ISP1301 IRQ wired at M14 */ - omap_cfg_reg(M14_1510_GPIO2); - h2_i2c_board_info[0].irq = gpio_to_irq(58); - omap_register_i2c_bus(1, 100, h2_i2c_board_info, - ARRAY_SIZE(h2_i2c_board_info)); - omap1_usb_init(&h2_usb_config); - h2_mmc_init(); - - omapfb_set_lcd_config(&h2_lcd_config); -} - -MACHINE_START(OMAP_H2, "TI-H2") - /* Maintainer: Imre Deak <imre.deak@nokia.com> */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = h2_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h deleted file mode 100644 index 315e2662547e..000000000000 --- a/arch/arm/mach-omap1/board-h2.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/mach-omap1/board-h2.h - * - * Hardware definitions for TI OMAP1610 H2 board. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H2_H -#define __ASM_ARCH_OMAP_H2_H - -#define H2_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define H2_TPS_GPIO_MMC_PWR_EN (H2_TPS_GPIO_BASE + 3) - -extern void h2_mmc_init(void); - -#endif /* __ASM_ARCH_OMAP_H2_H */ - diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c deleted file mode 100644 index f595bd4f5024..000000000000 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h3-mmc.c - * - * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT - * Author: Felipe Balbi <felipe.lima@indt.org.br> - * - * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: - * Copyright (C) 2006 Nokia Corporation - */ -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <linux/mfd/tps65010.h> - -#include "common.h" -#include "board-h3.h" -#include "mmc.h" - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); - return 0; -} - -/* - * H3 could use the following functions tested: - * - mmc_get_cover_state that uses OMAP_MPUIO(1) - * - mmc_get_wp that maybe uses OMAP_MPUIO(3) - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .slots[0] = { - .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -void __init h3_mmc_init(void) -{ - int ret; - - ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power"); - if (ret < 0) - return; - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC); -} - -#else - -void __init h3_mmc_init(void) -{ -} - -#endif diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c deleted file mode 100644 index 1e4c57710fcc..000000000000 --- a/arch/arm/mach-omap1/board-h3.c +++ /dev/null @@ -1,455 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h3.c - * - * This file contains OMAP1710 H3 specific code. - * - * Copyright (C) 2004 Texas Instruments, Inc. - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - */ -#include <linux/gpio.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/errno.h> -#include <linux/workqueue.h> -#include <linux/i2c.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <linux/mfd/tps65010.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/omap-dma.h> -#include <linux/leds.h> - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "irqs.h" -#include "usb.h" -#include "common.h" -#include "board-h3.h" - -/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ -#define OMAP1710_ETHR_START 0x04000300 - -#define H3_TS_GPIO 48 - -static const unsigned int h3_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_3), - KEY(3, 0, KEY_F10), - KEY(4, 0, KEY_F5), - KEY(5, 0, KEY_9), - KEY(0, 1, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(2, 1, KEY_2), - KEY(3, 1, KEY_F9), - KEY(4, 1, KEY_F7), - KEY(5, 1, KEY_0), - KEY(0, 2, KEY_ENTER), - KEY(1, 2, KEY_6), - KEY(2, 2, KEY_1), - KEY(3, 2, KEY_F2), - KEY(4, 2, KEY_F6), - KEY(5, 2, KEY_HOME), - KEY(0, 3, KEY_8), - KEY(1, 3, KEY_5), - KEY(2, 3, KEY_F12), - KEY(3, 3, KEY_F3), - KEY(4, 3, KEY_F8), - KEY(5, 3, KEY_END), - KEY(0, 4, KEY_7), - KEY(1, 4, KEY_4), - KEY(2, 4, KEY_F11), - KEY(3, 4, KEY_F1), - KEY(4, 4, KEY_F4), - KEY(5, 4, KEY_ESC), - KEY(0, 5, KEY_F13), - KEY(1, 5, KEY_F14), - KEY(2, 5, KEY_F15), - KEY(3, 5, KEY_F16), - KEY(4, 5, KEY_SLEEP), -}; - - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - /* This is on CS3, wherever it's mapped */ - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -static struct mtd_partition nand_partitions[] = { -#if 0 - /* REVISIT: enable these partitions if you make NAND BOOT work */ - { - .name = "xloader", - .offset = 0, - .size = 64 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 192 * 1024, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 2 * SZ_1M, - }, -#endif - { - .name = "filesystem", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(nand_partitions), - .partitions = nand_partitions, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - - }, -}; - -static struct resource nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_platdata, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = OMAP1710_ETHR_START, /* Physical */ - .end = OMAP1710_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (gpio_request(40, "SMC91x irq") < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} - -#define GPTIMER_BASE 0xFFFB1400 -#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) -#define GPTIMER_REGS_SIZE 0x46 - -static struct resource intlat_resources[] = { - [0] = { - .start = GPTIMER_REGS(0), /* Physical */ - .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_1610_GPTIMER1, - .end = INT_1610_GPTIMER1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device intlat_device = { - .name = "omap_intlat", - .id = 0, - .num_resources = ARRAY_SIZE(intlat_resources), - .resource = intlat_resources, -}; - -static struct resource h3_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data h3_keymap_data = { - .keymap = h3_keymap, - .keymap_size = ARRAY_SIZE(h3_keymap), -}; - -static struct omap_kp_platform_data h3_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &h3_keymap_data, - .rep = true, - .delay = 9, - .dbounce = true, -}; - -static struct platform_device h3_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h3_kp_data, - }, - .num_resources = ARRAY_SIZE(h3_kp_resources), - .resource = h3_kp_resources, -}; - -static struct platform_device h3_lcd_device = { - .name = "lcd_h3", - .id = -1, -}; - -static struct spi_board_info h3_spi_board_info[] __initdata = { - [0] = { - .modalias = "tsc2101", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 16000000, - /* .platform_data = &tsc_platform_data, */ - }, -}; - -static const struct gpio_led h3_gpio_led_pins[] = { - { - .name = "h3:red", - .default_trigger = "heartbeat", - .gpio = 3, - }, - { - .name = "h3:green", - .default_trigger = "cpu0", - .gpio = OMAP_MPUIO(4), - }, -}; - -static struct gpio_led_platform_data h3_gpio_led_data = { - .leds = h3_gpio_led_pins, - .num_leds = ARRAY_SIZE(h3_gpio_led_pins), -}; - -static struct platform_device h3_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &h3_gpio_led_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &intlat_device, - &h3_kp_device, - &h3_lcd_device, - &h3_gpio_leds, -}; - -static struct omap_usb_config h3_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config h3_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static struct i2c_board_info __initdata h3_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65013", 0x48), - }, - { - I2C_BOARD_INFO("isp1301_omap", 0x2d), - }, -}; - -static void __init h3_init(void) -{ - h3_init_smc91x(); - - /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped - * to address 0 by a dip switch), NAND on CS2B. The NAND driver will - * notice whether a NAND chip is enabled at probe time. - * - * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND - * (which on H2 may be 16bit) on CS3. Try detecting that in code here, - * to avoid probing every possible flash configuration... - */ - nor_resource.end = nor_resource.start = omap_cs3_phys(); - nor_resource.end += SZ_32M - 1; - - nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; - nand_resource.end += SZ_4K - 1; - BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(H3_NAND_RB_GPIO_PIN); - - /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ - /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ - omap_cfg_reg(V2_1710_GPIO10); - - /* Mux pins for keypad */ - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - - /* GPIO based LEDs */ - omap_cfg_reg(P18_1610_GPIO3); - omap_cfg_reg(MPUIO4); - - smc91x_resources[1].start = gpio_to_irq(40); - smc91x_resources[1].end = gpio_to_irq(40); - platform_add_devices(devices, ARRAY_SIZE(devices)); - h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); - spi_register_board_info(h3_spi_board_info, - ARRAY_SIZE(h3_spi_board_info)); - omap_serial_init(); - h3_i2c_board_info[1].irq = gpio_to_irq(14); - omap_register_i2c_bus(1, 100, h3_i2c_board_info, - ARRAY_SIZE(h3_i2c_board_info)); - omap1_usb_init(&h3_usb_config); - h3_mmc_init(); - - omapfb_set_lcd_config(&h3_lcd_config); -} - -MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") - /* Maintainer: Texas Instruments, Inc. */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = h3_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h deleted file mode 100644 index 78de535be3c5..000000000000 --- a/arch/arm/mach-omap1/board-h3.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-omap1/board-h3.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_H3_H -#define __ASM_ARCH_OMAP_H3_H - -#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4) - -extern void h3_mmc_init(void); - -#endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c deleted file mode 100644 index 291d294b5824..000000000000 --- a/arch/arm/mach-omap1/board-htcherald.c +++ /dev/null @@ -1,585 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * HTC Herald board configuration - * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com> - * Copyright (C) 2009 Wing Linux - * - * Based on the board-htcwizard.c file from the linwizard project: - * Copyright (C) 2006 Unai Uribarri - * Copyright (C) 2008 linwizard.sourceforge.net - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-gpio.h> -#include <linux/htcpld.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/soc/ti/omap1-io.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "hardware.h" -#include "omap7xx.h" -#include "mmc.h" -#include "irqs.h" -#include "usb.h" -#include "common.h" - -/* LCD register definition */ -#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00) -#define OMAP_LCDC_STATUS (0xfffec000 + 0x10) -#define OMAP_DMA_LCD_CCR (0xfffee300 + 0xc2) -#define OMAP_DMA_LCD_CTRL (0xfffee300 + 0xc4) -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) -#define OMAP_LCDC_STAT_DONE (1 << 0) - -/* GPIO definitions for the power button and keyboard slide switch */ -#define HTCHERALD_GPIO_POWER 139 -#define HTCHERALD_GPIO_SLIDE 174 -#define HTCHERALD_GIRQ_BTNS 141 - -/* GPIO definitions for the touchscreen */ -#define HTCHERALD_GPIO_TS 76 - -/* HTCPLD definitions */ - -/* - * CPLD Logic - * - * Chip 3 - 0x03 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * DPAD light x x x x x x x 1 - * SoundDev x x x x 1 x x x - * Screen white 1 x x x x x x x - * MMC power on x x x x x 1 x x - * Happy times (n) 0 x x x x 1 x x - * - * Chip 4 - 0x04 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * Keyboard light x x x x x x x 1 - * LCD Bright (4) x x x x x 1 1 x - * LCD Bright (3) x x x x x 0 1 x - * LCD Bright (2) x x x x x 1 0 x - * LCD Bright (1) x x x x x 0 0 x - * LCD Off x x x x 0 x x x - * LCD image (fb) 1 x x x x x x x - * LCD image (white) 0 x x x x x x x - * Caps lock LED x x 1 x x x x x - * - * Chip 5 - 0x05 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * Red (solid) x x x x x 1 x x - * Red (flash) x x x x x x 1 x - * Green (GSM flash) x x x x 1 x x x - * Green (GSM solid) x x x 1 x x x x - * Green (wifi flash) x x 1 x x x x x - * Blue (bt flash) x 1 x x x x x x - * DPAD Int Enable 1 x x x x x x 0 - * - * (Combinations of the above can be made for different colors.) - * The direction pad interrupt enable must be set each time the - * interrupt is handled. - * - * Chip 6 - 0x06 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * Vibrator x x x x 1 x x x - * Alt LED x x x 1 x x x x - * Screen white 1 x x x x x x x - * Screen white x x 1 x x x x x - * Screen white x 0 x x x x x x - * Enable kbd dpad x x x x x x 0 x - * Happy Times 0 1 0 x x x 0 x - */ - -/* - * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account - * for the 16 MPUIO lines. - */ -#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16) -#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset)) -#define HTCPLD_BASE(chip, offset) \ - (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset)) - -#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0) -#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0) -#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5) -#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1) -#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2) -#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3) -#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4) -#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5) -#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6) -#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3) -#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4) - -#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7) -#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6) -#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5) -#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4) - -#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7) -#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6) -#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5) -#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) -#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) - -/* Chip 5 */ -#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) -#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) -#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5) -#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4) - -/* Chip 6 */ -#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7) -#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6) -#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5) -#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4) -#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3) - -/* Keyboard definition */ - -static const unsigned int htc_herald_keymap[] = { - KEY(0, 0, KEY_RECORD), /* Mail button */ - KEY(1, 0, KEY_CAMERA), /* Camera */ - KEY(2, 0, KEY_PHONE), /* Send key */ - KEY(3, 0, KEY_VOLUMEUP), /* Volume up */ - KEY(4, 0, KEY_F2), /* Right bar (landscape) */ - KEY(5, 0, KEY_MAIL), /* Win key (portrait) */ - KEY(6, 0, KEY_DIRECTORY), /* Right bar (portrait) */ - KEY(0, 1, KEY_LEFTCTRL), /* Windows key */ - KEY(1, 1, KEY_COMMA), - KEY(2, 1, KEY_M), - KEY(3, 1, KEY_K), - KEY(4, 1, KEY_SLASH), /* OK key */ - KEY(5, 1, KEY_I), - KEY(6, 1, KEY_U), - KEY(0, 2, KEY_LEFTALT), - KEY(1, 2, KEY_TAB), - KEY(2, 2, KEY_N), - KEY(3, 2, KEY_J), - KEY(4, 2, KEY_ENTER), - KEY(5, 2, KEY_H), - KEY(6, 2, KEY_Y), - KEY(0, 3, KEY_SPACE), - KEY(1, 3, KEY_L), - KEY(2, 3, KEY_B), - KEY(3, 3, KEY_V), - KEY(4, 3, KEY_BACKSPACE), - KEY(5, 3, KEY_G), - KEY(6, 3, KEY_T), - KEY(0, 4, KEY_CAPSLOCK), /* Shift */ - KEY(1, 4, KEY_C), - KEY(2, 4, KEY_F), - KEY(3, 4, KEY_R), - KEY(4, 4, KEY_O), - KEY(5, 4, KEY_E), - KEY(6, 4, KEY_D), - KEY(0, 5, KEY_X), - KEY(1, 5, KEY_Z), - KEY(2, 5, KEY_S), - KEY(3, 5, KEY_W), - KEY(4, 5, KEY_P), - KEY(5, 5, KEY_Q), - KEY(6, 5, KEY_A), - KEY(0, 6, KEY_CONNECT), /* Voice button */ - KEY(2, 6, KEY_CANCEL), /* End key */ - KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */ - KEY(4, 6, KEY_F1), /* Left bar (landscape) */ - KEY(5, 6, KEY_WWW), /* OK button (portrait) */ - KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */ -}; - -static const struct matrix_keymap_data htc_herald_keymap_data = { - .keymap = htc_herald_keymap, - .keymap_size = ARRAY_SIZE(htc_herald_keymap), -}; - -static struct omap_kp_platform_data htcherald_kp_data = { - .rows = 7, - .cols = 7, - .delay = 20, - .rep = true, - .keymap_data = &htc_herald_keymap_data, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &htcherald_kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -/* GPIO buttons for keyboard slide and power button */ -static struct gpio_keys_button herald_gpio_keys_table[] = { - {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20}, - {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20}, - - {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20}, - {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20}, - {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20}, - {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20}, - - {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20}, - {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20}, - {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20}, - {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20}, - {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20}, -}; - -static struct gpio_keys_platform_data herald_gpio_keys_data = { - .buttons = herald_gpio_keys_table, - .nbuttons = ARRAY_SIZE(herald_gpio_keys_table), - .rep = true, -}; - -static struct platform_device herald_gpiokeys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &herald_gpio_keys_data, - }, -}; - -/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ -static const struct gpio_led gpio_leds[] = { - {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, -}; - -static struct gpio_led_platform_data gpio_leds_data = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device gpio_leds_device = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &gpio_leds_data, - }, -}; - -/* HTC PLD chips */ - -static struct resource htcpld_resources[] = { - [0] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct htcpld_chip_platform_data htcpld_chips[] = { - [0] = { - .addr = 0x03, - .reset = 0x04, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(0, 0), - .gpio_in_base = HTCPLD_BASE(4, 0), - }, - [1] = { - .addr = 0x04, - .reset = 0x8e, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(1, 0), - .gpio_in_base = HTCPLD_BASE(5, 0), - }, - [2] = { - .addr = 0x05, - .reset = 0x80, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(2, 0), - .gpio_in_base = HTCPLD_BASE(6, 0), - .irq_base = HTCPLD_IRQ(0, 0), - .num_irqs = 8, - }, - [3] = { - .addr = 0x06, - .reset = 0x40, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(3, 0), - .gpio_in_base = HTCPLD_BASE(7, 0), - .irq_base = HTCPLD_IRQ(1, 0), - .num_irqs = 8, - }, -}; - -static struct htcpld_core_platform_data htcpld_pfdata = { - .i2c_adapter_id = 1, - - .chip = htcpld_chips, - .num_chip = ARRAY_SIZE(htcpld_chips), -}; - -static struct platform_device htcpld_device = { - .name = "i2c-htcpld", - .id = -1, - .resource = htcpld_resources, - .num_resources = ARRAY_SIZE(htcpld_resources), - .dev = { - .platform_data = &htcpld_pfdata, - }, -}; - -/* USB Device */ -static struct omap_usb_config htcherald_usb_config __initdata = { - .otg = 0, - .register_host = 0, - .register_dev = 1, - .hmc_mode = 4, - .pins[0] = 2, -}; - -/* LCD Device resources */ -static const struct omap_lcd_config htcherald_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static struct platform_device lcd_device = { - .name = "lcd_htcherald", - .id = -1, -}; - -/* MMC Card */ -#if IS_ENABLED(CONFIG_MMC_OMAP) -static struct omap_mmc_platform_data htc_mmc1_data = { - .nr_slots = 1, - .switch_slot = NULL, - .slots[0] = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .name = "mmcblk", - .nomux = 1, - .wires = 4, - .switch_pin = -1, - }, -}; - -static struct omap_mmc_platform_data *htc_mmc_data[1]; -#endif - - -/* Platform devices for the Herald */ -static struct platform_device *devices[] __initdata = { - &kp_device, - &lcd_device, - &htcpld_device, - &gpio_leds_device, - &herald_gpiokeys_device, -}; - -/* - * Touchscreen - */ -static const struct ads7846_platform_data htcherald_ts_platform_data = { - .model = 7846, - .keep_vref_on = 1, - .x_plate_ohms = 496, - .gpio_pendown = HTCHERALD_GPIO_TS, - .pressure_max = 10000, - .pressure_min = 5000, - .x_min = 528, - .x_max = 3760, - .y_min = 624, - .y_max = 3760, -}; - -static struct spi_board_info __initdata htcherald_spi_board_info[] = { - { - .modalias = "ads7846", - .platform_data = &htcherald_ts_platform_data, - .max_speed_hz = 2500000, - .bus_num = 2, - .chip_select = 1, - } -}; - -/* - * Init functions from here on - */ - -static void __init htcherald_lcd_init(void) -{ - u32 reg; - unsigned int tries = 200; - - /* disable controller if active */ - reg = omap_readl(OMAP_LCDC_CONTROL); - if (reg & OMAP_LCDC_CTRL_LCD_EN) { - reg &= ~OMAP_LCDC_CTRL_LCD_EN; - omap_writel(reg, OMAP_LCDC_CONTROL); - - /* wait for end of frame */ - while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) { - tries--; - if (!tries) - break; - } - if (!tries) - pr_err("Timeout waiting for end of frame -- LCD may not be available\n"); - - /* turn off DMA */ - reg = omap_readw(OMAP_DMA_LCD_CCR); - reg &= ~(1 << 7); - omap_writew(reg, OMAP_DMA_LCD_CCR); - - reg = omap_readw(OMAP_DMA_LCD_CTRL); - reg &= ~(1 << 8); - omap_writew(reg, OMAP_DMA_LCD_CTRL); - } -} - -static void __init htcherald_map_io(void) -{ - omap7xx_map_io(); - - /* - * The LCD panel must be disabled and DMA turned off here, as doing - * it later causes the LCD never to reinitialize. - */ - htcherald_lcd_init(); - - printk(KERN_INFO "htcherald_map_io done.\n"); -} - -static void __init htcherald_disable_watchdog(void) -{ - /* Disable watchdog if running */ - if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) { - /* - * disable a potentially running watchdog timer before - * it kills us. - */ - printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n"); - omap_writel(0xF5, OMAP_WDT_TIMER_MODE); - omap_writel(0xA0, OMAP_WDT_TIMER_MODE); - } -} - -#define HTCHERALD_GPIO_USB_EN1 33 -#define HTCHERALD_GPIO_USB_EN2 73 -#define HTCHERALD_GPIO_USB_DM 35 -#define HTCHERALD_GPIO_USB_DP 36 - -static void __init htcherald_usb_enable(void) -{ - unsigned int tries = 20; - unsigned int value = 0; - - /* Request the GPIOs we need to control here */ - if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) - goto err1; - - if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) - goto err2; - - if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) - goto err3; - - if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) - goto err4; - - /* force USB_EN GPIO to 0 */ - do { - /* output low */ - gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); - } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && - --tries); - - if (value == 1) - printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); - - gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ - gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ - gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ - - goto done; - -err4: - gpio_free(HTCHERALD_GPIO_USB_DM); -err3: - gpio_free(HTCHERALD_GPIO_USB_EN2); -err2: - gpio_free(HTCHERALD_GPIO_USB_EN1); -err1: - printk(KERN_ERR "Unabled to request GPIO for USB\n"); -done: - printk(KERN_INFO "USB setup complete.\n"); -} - -static void __init htcherald_init(void) -{ - printk(KERN_INFO "HTC Herald init.\n"); - - /* Do board initialization before we register all the devices */ - htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS); - htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - htcherald_disable_watchdog(); - - htcherald_usb_enable(); - omap1_usb_init(&htcherald_usb_config); - - htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS); - spi_register_board_info(htcherald_spi_board_info, - ARRAY_SIZE(htcherald_spi_board_info)); - - omap_register_i2c_bus(1, 100, NULL, 0); - -#if IS_ENABLED(CONFIG_MMC_OMAP) - htc_mmc_data[0] = &htc_mmc1_data; - omap1_init_mmc(htc_mmc_data, 1); -#endif - - omapfb_set_lcd_config(&htcherald_lcd_config); -} - -MACHINE_START(HERALD, "HTC Herald") - /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ - /* Maintainer: wing-linux.sourceforge.net */ - .atag_offset = 0x100, - .map_io = htcherald_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = htcherald_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c deleted file mode 100644 index 6deb4ca079e9..000000000000 --- a/arch/arm/mach-omap1/board-innovator.c +++ /dev/null @@ -1,481 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-innovator.c - * - * Board specific inits for OMAP-1510 and OMAP-1610 Innovator - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "usb.h" -#include "iomap.h" -#include "common.h" -#include "mmc.h" - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define INNOVATOR1610_ETHR_START 0x04000300 - -static const unsigned int innovator_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(3, 0, KEY_DOWN), - KEY(1, 1, KEY_F2), - KEY(2, 1, KEY_RIGHT), - KEY(0, 2, KEY_F3), - KEY(1, 2, KEY_F4), - KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_ENTER), - KEY(3, 3, KEY_LEFT), -}; - -static struct mtd_partition innovator_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash1 is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16M - SZ_2M - 2 * SZ_128K, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data innovator_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = innovator_partitions, - .nr_parts = ARRAY_SIZE(innovator_partitions), -}; - -static struct resource innovator_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device innovator_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &innovator_flash_data, - }, - .num_resources = 1, - .resource = &innovator_flash_resource, -}; - -static struct resource innovator_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data innovator_keymap_data = { - .keymap = innovator_keymap, - .keymap_size = ARRAY_SIZE(innovator_keymap), -}; - -static struct omap_kp_platform_data innovator_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &innovator_keymap_data, - .delay = 4, -}; - -static struct platform_device innovator_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &innovator_kp_data, - }, - .num_resources = ARRAY_SIZE(innovator_kp_resources), - .resource = innovator_kp_resources, -}; - -static struct smc91x_platdata innovator_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -#ifdef CONFIG_ARCH_OMAP15XX - -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> - - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc innovator1510_io_desc[] __initdata = { - { - .virtual = OMAP1510_FPGA_BASE, - .pfn = __phys_to_pfn(OMAP1510_FPGA_START), - .length = OMAP1510_FPGA_SIZE, - .type = MT_DEVICE - } -}; - -static struct resource innovator1510_smc91x_resources[] = { - [0] = { - .start = OMAP1510_FPGA_ETHR_START, /* Physical */ - .end = OMAP1510_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP1510_INT_ETHER, - .end = OMAP1510_INT_ETHER, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device innovator1510_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &innovator_smc91x_info, - }, - .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), - .resource = innovator1510_smc91x_resources, -}; - -static struct platform_device innovator1510_lcd_device = { - .name = "lcd_inn1510", - .id = -1, - .dev = { - .platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL, - } -}; - -static struct platform_device innovator1510_spi_device = { - .name = "spi_inn1510", - .id = -1, -}; - -static struct platform_device *innovator1510_devices[] __initdata = { - &innovator_flash_device, - &innovator1510_smc91x_device, - &innovator_kp_device, - &innovator1510_lcd_device, - &innovator1510_spi_device, -}; - -static int innovator_get_pendown_state(void) -{ - return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); -} - -static const struct ads7846_platform_data innovator1510_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = innovator_get_pendown_state, -}; - -static struct spi_board_info __initdata innovator1510_boardinfo[] = { { - /* FPGA (bus "10") CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &innovator1510_ts_info, - .irq = OMAP1510_INT_FPGA_TS, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 10, - .chip_select = 0, -} }; - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct resource innovator1610_smc91x_resources[] = { - [0] = { - .start = INNOVATOR1610_ETHR_START, /* Physical */ - .end = INNOVATOR1610_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device innovator1610_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &innovator_smc91x_info, - }, - .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), - .resource = innovator1610_smc91x_resources, -}; - -static struct platform_device innovator1610_lcd_device = { - .name = "inn1610_lcd", - .id = -1, -}; - -static struct platform_device *innovator1610_devices[] __initdata = { - &innovator_flash_device, - &innovator1610_smc91x_device, - &innovator_kp_device, - &innovator1610_lcd_device, -}; - -#endif /* CONFIG_ARCH_OMAP16XX */ - -static void __init innovator_init_smc91x(void) -{ - if (cpu_is_omap1510()) { - __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, - OMAP1510_FPGA_RST); - udelay(750); - } else { - if (gpio_request(0, "SMC91x irq") < 0) { - printk("Error requesting gpio 0 for smc91x irq\n"); - return; - } - } -} - -#ifdef CONFIG_ARCH_OMAP15XX -/* - * Board specific gang-switched transceiver power on/off. - */ -static int innovator_omap_ohci_transceiver_power(int on) -{ - if (on) - __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) - | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), - INNOVATOR_FPGA_CAM_USB_CONTROL); - else - __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) - & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), - INNOVATOR_FPGA_CAM_USB_CONTROL); - - return 0; -} - -static struct omap_usb_config innovator1510_usb_config __initdata = { - /* for bundled non-standard host and peripheral cables */ - .hmc_mode = 4, - - .register_host = 1, - .pins[1] = 6, - .pins[2] = 6, /* Conflicts with UART2 */ - - .register_dev = 1, - .pins[0] = 2, - - .transceiver_power = innovator_omap_ohci_transceiver_power, -}; - -static const struct omap_lcd_config innovator1510_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#ifdef CONFIG_ARCH_OMAP16XX -static struct omap_usb_config h2_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ - /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config innovator1610_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - if (power_on) - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), - OMAP1510_FPGA_POWER); - else - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), - OMAP1510_FPGA_POWER); - - return 0; -} - -/* - * Innovator could use the following functions tested: - * - mmc_get_wp that uses OMAP_MPUIO(3) - * - mmc_get_cover_state that uses FPGA F4 UIO43 - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .slots[0] = { - .set_power = mmc_set_power, - .wires = 4, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -static void __init innovator_mmc_init(void) -{ - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC); -} - -#else -static inline void innovator_mmc_init(void) -{ -} -#endif - -static void __init innovator_init(void) -{ - if (cpu_is_omap1510()) - omap1510_fpga_init_irq(); - innovator_init_smc91x(); - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - unsigned char reg; - - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - reg = __raw_readb(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); - udelay(10); - - reg = __raw_readb(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); - udelay(10); - - platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); - spi_register_board_info(innovator1510_boardinfo, - ARRAY_SIZE(innovator1510_boardinfo)); - } -#endif -#ifdef CONFIG_ARCH_OMAP16XX - if (!cpu_is_omap1510()) { - innovator1610_smc91x_resources[1].start = gpio_to_irq(0); - innovator1610_smc91x_resources[1].end = gpio_to_irq(0); - platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices)); - } -#endif - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - omap1_usb_init(&innovator1510_usb_config); - omapfb_set_lcd_config(&innovator1510_lcd_config); - } -#endif -#ifdef CONFIG_ARCH_OMAP16XX - if (cpu_is_omap1610()) { - omap1_usb_init(&h2_usb_config); - omapfb_set_lcd_config(&innovator1610_lcd_config); - } -#endif - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - innovator_mmc_init(); -} - -/* - * REVISIT: Assume 15xx for now, we don't want to do revision check - * until later on. The right way to fix this is to set up a different - * machine_id for 16xx Innovator, or use device tree. - */ -static void __init innovator_map_io(void) -{ -#ifdef CONFIG_ARCH_OMAP15XX - omap15xx_map_io(); - - iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); - udelay(10); /* Delay needed for FPGA */ - - /* Dump the Innovator FPGA rev early - useful info for support. */ - pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - __raw_readb(OMAP1510_FPGA_REV_HIGH), - __raw_readb(OMAP1510_FPGA_REV_LOW), - __raw_readb(OMAP1510_FPGA_BOARD_REV)); -#endif -} - -MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = innovator_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = innovator_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c deleted file mode 100644 index 479ab9be784d..000000000000 --- a/arch/arm/mach-omap1/board-nand.c +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-nand.c - * - * Common OMAP1 board NAND code - * - * Copyright (C) 2004, 2012 Texas Instruments, Inc. - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - */ -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> - -#include "common.h" - -void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl) -{ - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - - writeb(cmd, this->legacy.IO_ADDR_W + mask); -} - diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 8e0e58495023..a501a473ffd6 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -288,7 +288,7 @@ static void __init omap_nokia770_init(void) MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, - .map_io = omap16xx_map_io, + .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, .handle_irq = omap1_handle_irq, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 76684b7a4e87..df758c1f9237 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -339,267 +339,6 @@ static struct omap_usb_config osk_usb_config __initdata = { .pins[0] = 2, }; -#ifdef CONFIG_OMAP_OSK_MISTRAL -static const struct omap_lcd_config osk_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#ifdef CONFIG_OMAP_OSK_MISTRAL - -#include <linux/input.h> -#include <linux/property.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> - -#include <linux/platform_data/keypad-omap.h> - -static const struct property_entry mistral_at24_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 16), - { } -}; - -static const struct software_node mistral_at24_node = { - .properties = mistral_at24_properties, -}; - -static struct i2c_board_info __initdata mistral_i2c_board_info[] = { - { - /* NOTE: powered from LCD supply */ - I2C_BOARD_INFO("24c04", 0x50), - .swnode = &mistral_at24_node, - }, - /* TODO when driver support is ready: - * - optionally ov9640 camera sensor at 0x30 - */ -}; - -static const unsigned int osk_keymap[] = { - /* KEY(col, row, code) */ - KEY(0, 0, KEY_F1), /* SW4 */ - KEY(3, 0, KEY_UP), /* (sw2/up) */ - KEY(1, 1, KEY_LEFTCTRL), /* SW5 */ - KEY(2, 1, KEY_LEFT), /* (sw2/left) */ - KEY(0, 2, KEY_SPACE), /* SW3 */ - KEY(1, 2, KEY_ESC), /* SW6 */ - KEY(2, 2, KEY_DOWN), /* (sw2/down) */ - KEY(2, 3, KEY_ENTER), /* (sw2/select) */ - KEY(3, 3, KEY_RIGHT), /* (sw2/right) */ -}; - -static const struct matrix_keymap_data osk_keymap_data = { - .keymap = osk_keymap, - .keymap_size = ARRAY_SIZE(osk_keymap), -}; - -static struct omap_kp_platform_data osk_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &osk_keymap_data, - .delay = 9, -}; - -static struct resource osk5912_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device osk5912_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &osk_kp_data, - }, - .num_resources = ARRAY_SIZE(osk5912_kp_resources), - .resource = osk5912_kp_resources, -}; - -static struct omap_backlight_config mistral_bl_data = { - .default_intensity = 0xa0, -}; - -static struct platform_device mistral_bl_device = { - .name = "omap-bl", - .id = -1, - .dev = { - .platform_data = &mistral_bl_data, - }, -}; - -static struct platform_device osk5912_lcd_device = { - .name = "lcd_osk", - .id = -1, -}; - -static const struct gpio_led mistral_gpio_led_pins[] = { - { - .name = "mistral:red", - .default_trigger = "heartbeat", - .gpio = 3, - }, - { - .name = "mistral:green", - .default_trigger = "cpu0", - .gpio = OMAP_MPUIO(4), - }, -}; - -static struct gpio_led_platform_data mistral_gpio_led_data = { - .leds = mistral_gpio_led_pins, - .num_leds = ARRAY_SIZE(mistral_gpio_led_pins), -}; - -static struct platform_device mistral_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mistral_gpio_led_data, - }, -}; - -static struct platform_device *mistral_devices[] __initdata = { - &osk5912_kp_device, - &mistral_bl_device, - &osk5912_lcd_device, - &mistral_gpio_leds, -}; - -static int mistral_get_pendown_state(void) -{ - return !gpio_get_value(4); -} - -static const struct ads7846_platform_data mistral_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = mistral_get_pendown_state, -}; - -static struct spi_board_info __initdata mistral_boardinfo[] = { { - /* MicroWire (bus 2) CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &mistral_ts_info, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 2, - .chip_select = 0, -} }; - -static irqreturn_t -osk_mistral_wake_interrupt(int irq, void *ignored) -{ - return IRQ_HANDLED; -} - -static void __init osk_mistral_init(void) -{ - /* NOTE: we could actually tell if there's a Mistral board - * attached, e.g. by trying to read something from the ads7846. - * But this arch_init() code is too early for that, since we - * can't talk to the ads or even the i2c eeprom. - */ - - /* parallel camera interface */ - omap_cfg_reg(J15_1610_CAM_LCLK); - omap_cfg_reg(J18_1610_CAM_D7); - omap_cfg_reg(J19_1610_CAM_D6); - omap_cfg_reg(J14_1610_CAM_D5); - omap_cfg_reg(K18_1610_CAM_D4); - omap_cfg_reg(K19_1610_CAM_D3); - omap_cfg_reg(K15_1610_CAM_D2); - omap_cfg_reg(K14_1610_CAM_D1); - omap_cfg_reg(L19_1610_CAM_D0); - omap_cfg_reg(L18_1610_CAM_VS); - omap_cfg_reg(L15_1610_CAM_HS); - omap_cfg_reg(M19_1610_CAM_RSTZ); - omap_cfg_reg(Y15_1610_CAM_OUTCLK); - - /* serial camera interface */ - omap_cfg_reg(H19_1610_CAM_EXCLK); - omap_cfg_reg(W13_1610_CCP_CLKM); - omap_cfg_reg(Y12_1610_CCP_CLKP); - /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ - /* omap_cfg_reg(Y14_1610_CCP_DATAM); */ - omap_cfg_reg(W14_1610_CCP_DATAP); - - /* CAM_PWDN */ - if (gpio_request(11, "cam_pwdn") == 0) { - omap_cfg_reg(N20_1610_GPIO11); - gpio_direction_output(11, 0); - } else - pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); - - - /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ - gpio_request(6, "ts_busy"); - gpio_direction_input(6); - - omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ - gpio_request(4, "ts_int"); - gpio_direction_input(4); - irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); - - mistral_boardinfo[0].irq = gpio_to_irq(4); - spi_register_board_info(mistral_boardinfo, - ARRAY_SIZE(mistral_boardinfo)); - - /* the sideways button (SW1) is for use as a "wakeup" button - * - * NOTE: The Mistral board has the wakeup button (SW1) wired - * to the LCD 3.3V rail, which is powered down during suspend. - * To allow this button to wake up the omap, work around this - * HW bug by rewiring SW1 to use the main 3.3V rail. - */ - omap_cfg_reg(N15_1610_MPUIO2); - if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) { - int ret = 0; - int irq = gpio_to_irq(OMAP_MPUIO(2)); - - gpio_direction_input(OMAP_MPUIO(2)); - irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); - /* share the IRQ in case someone wants to use the - * button for more than wakeup from system sleep. - */ - ret = request_irq(irq, - &osk_mistral_wake_interrupt, - IRQF_SHARED, "mistral_wakeup", - &osk_mistral_wake_interrupt); - if (ret != 0) { - gpio_free(OMAP_MPUIO(2)); - printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", - ret); - } else - enable_irq_wake(irq); - } else - printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); - - /* LCD: backlight, and power; power controls other devices on the - * board, like the touchscreen, EEPROM, and wakeup (!) switch. - */ - omap_cfg_reg(PWL); - if (gpio_request(2, "lcd_pwr") == 0) - gpio_direction_output(2, 1); - - /* - * GPIO based LEDs - */ - omap_cfg_reg(P18_1610_GPIO3); - omap_cfg_reg(MPUIO4); - - i2c_register_board_info(1, mistral_i2c_board_info, - ARRAY_SIZE(mistral_i2c_board_info)); - - platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices)); -} -#else -static void __init osk_mistral_init(void) { } -#endif - #define EMIFS_CS3_VAL (0x88013141) static void __init osk_init(void) @@ -642,18 +381,12 @@ static void __init osk_init(void) osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1)); omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); - osk_mistral_init(); - -#ifdef CONFIG_OMAP_OSK_MISTRAL - omapfb_set_lcd_config(&osk_lcd_config); -#endif - } MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ .atag_offset = 0x100, - .map_io = omap16xx_map_io, + .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, .handle_irq = omap1_handle_irq, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 72e1979c7a8b..f79c497f04d5 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -256,7 +256,7 @@ static void __init omap_palmte_init(void) MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, .handle_irq = omap1_handle_irq, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c deleted file mode 100644 index 537f0e6a2ff7..000000000000 --- a/arch/arm/mach-omap1/board-palmtt.c +++ /dev/null @@ -1,285 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-palmtt.c - * - * Modified from board-palmtt2.c - * - * Modified and amended for Palm Tungsten|T - * by Marek Vasut <marek.vasut@gmail.com> - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/notifier.h> -#include <linux/clk.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/leds.h> -#include <linux/omapfb.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/omap-dma.h> -#include <linux/platform_data/omap1_bl.h> -#include <linux/platform_data/leds-omap.h> -#include <linux/platform_data/keypad-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "flash.h" -#include "mux.h" -#include "hardware.h" -#include "usb.h" -#include "common.h" - -#define PALMTT_USBDETECT_GPIO 0 -#define PALMTT_CABLE_GPIO 1 -#define PALMTT_LED_GPIO 3 -#define PALMTT_PENIRQ_GPIO 6 -#define PALMTT_MMC_WP_GPIO 8 -#define PALMTT_HDQ_GPIO 11 - -static const unsigned int palmtt_keymap[] = { - KEY(0, 0, KEY_ESC), - KEY(1, 0, KEY_SPACE), - KEY(2, 0, KEY_LEFTCTRL), - KEY(3, 0, KEY_TAB), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_LEFT), - KEY(1, 1, KEY_DOWN), - KEY(2, 1, KEY_UP), - KEY(3, 1, KEY_RIGHT), - KEY(0, 2, KEY_SLEEP), - KEY(4, 2, KEY_Y), -}; - -static struct mtd_partition palmtt_partitions[] = { - { - .name = "write8k", - .offset = 0, - .size = SZ_8K, - .mask_flags = 0, - }, - { - .name = "PalmOS-BootLoader(ro)", - .offset = SZ_8K, - .size = 7 * SZ_8K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot", - .offset = MTDPART_OFS_APPEND, - .size = 8 * SZ_8K, - .mask_flags = 0, - }, - { - .name = "PalmOS-FS(ro)", - .offset = MTDPART_OFS_APPEND, - .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot(rez)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0 - }, - { - .name = "empty", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data palmtt_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = palmtt_partitions, - .nr_parts = ARRAY_SIZE(palmtt_partitions), -}; - -static struct resource palmtt_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device palmtt_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &palmtt_flash_data, - }, - .num_resources = 1, - .resource = &palmtt_flash_resource, -}; - -static struct resource palmtt_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data palmtt_keymap_data = { - .keymap = palmtt_keymap, - .keymap_size = ARRAY_SIZE(palmtt_keymap), -}; - -static struct omap_kp_platform_data palmtt_kp_data = { - .rows = 6, - .cols = 3, - .keymap_data = &palmtt_keymap_data, -}; - -static struct platform_device palmtt_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &palmtt_kp_data, - }, - .num_resources = ARRAY_SIZE(palmtt_kp_resources), - .resource = palmtt_kp_resources, -}; - -static struct platform_device palmtt_lcd_device = { - .name = "lcd_palmtt", - .id = -1, -}; - -static struct platform_device palmtt_spi_device = { - .name = "spi_palmtt", - .id = -1, -}; - -static struct omap_backlight_config palmtt_backlight_config = { - .default_intensity = 0xa0, -}; - -static struct platform_device palmtt_backlight_device = { - .name = "omap-bl", - .id = -1, - .dev = { - .platform_data= &palmtt_backlight_config, - }, -}; - -static struct omap_led_config palmtt_led_config[] = { - { - .cdev = { - .name = "palmtt:led0", - }, - .gpio = PALMTT_LED_GPIO, - }, -}; - -static struct omap_led_platform_data palmtt_led_data = { - .nr_leds = ARRAY_SIZE(palmtt_led_config), - .leds = palmtt_led_config, -}; - -static struct platform_device palmtt_led_device = { - .name = "omap-led", - .id = -1, - .dev = { - .platform_data = &palmtt_led_data, - }, -}; - -static struct platform_device *palmtt_devices[] __initdata = { - &palmtt_flash_device, - &palmtt_kp_device, - &palmtt_lcd_device, - &palmtt_spi_device, - &palmtt_backlight_device, - &palmtt_led_device, -}; - -static int palmtt_get_pendown_state(void) -{ - return !gpio_get_value(6); -} - -static const struct ads7846_platform_data palmtt_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = palmtt_get_pendown_state, -}; - -static struct spi_board_info __initdata palmtt_boardinfo[] = { - { - /* MicroWire (bus 2) CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &palmtt_ts_info, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 2, - .chip_select = 0, - } -}; - -static struct omap_usb_config palmtt_usb_config __initdata = { - .register_dev = 1, - .hmc_mode = 0, - .pins[0] = 2, -}; - -static const struct omap_lcd_config palmtt_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init omap_mpu_wdt_mode(int mode) { - if (mode) - omap_writew(0x8000, OMAP_WDT_TIMER_MODE); - else { - omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); - omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); - } -} - -static void __init omap_palmtt_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - omap_mpu_wdt_mode(0); - - platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); - - palmtt_boardinfo[0].irq = gpio_to_irq(6); - spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); - omap_serial_init(); - omap1_usb_init(&palmtt_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&palmtt_lcd_config); -} - -MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_palmtt_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c deleted file mode 100644 index 47f08ae5a2f3..000000000000 --- a/arch/arm/mach-omap1/board-palmz71.c +++ /dev/null @@ -1,300 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-palmz71.c - * - * Modified from board-generic.c - * - * Support for the Palm Zire71 PDA. - * - * Original version : Laurent Gonzalez - * - * Modified for zire71 : Marek Vasut - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/notifier.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/omapfb.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/platform_data/omap1_bl.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/omap-dma.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "flash.h" -#include "mux.h" -#include "hardware.h" -#include "usb.h" -#include "common.h" - -#define PALMZ71_USBDETECT_GPIO 0 -#define PALMZ71_PENIRQ_GPIO 6 -#define PALMZ71_MMC_WP_GPIO 8 -#define PALMZ71_HDQ_GPIO 11 - -#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) -#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) -#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) -#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) - -static const unsigned int palmz71_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(1, 0, KEY_F2), - KEY(2, 0, KEY_F3), - KEY(3, 0, KEY_F4), - KEY(4, 0, KEY_POWER), - KEY(0, 1, KEY_LEFT), - KEY(1, 1, KEY_DOWN), - KEY(2, 1, KEY_UP), - KEY(3, 1, KEY_RIGHT), - KEY(4, 1, KEY_ENTER), - KEY(0, 2, KEY_CAMERA), -}; - -static const struct matrix_keymap_data palmz71_keymap_data = { - .keymap = palmz71_keymap, - .keymap_size = ARRAY_SIZE(palmz71_keymap), -}; - -static struct omap_kp_platform_data palmz71_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &palmz71_keymap_data, - .rep = true, - .delay = 80, -}; - -static struct resource palmz71_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device palmz71_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &palmz71_kp_data, - }, - .num_resources = ARRAY_SIZE(palmz71_kp_resources), - .resource = palmz71_kp_resources, -}; - -static struct mtd_partition palmz71_rom_partitions[] = { - /* PalmOS "Small ROM", contains the bootloader and the debugger */ - { - .name = "smallrom", - .offset = 0, - .size = 0xa000, - .mask_flags = MTD_WRITEABLE, - }, - /* PalmOS "Big ROM", a filesystem with all the OS code and data */ - { - .name = "bigrom", - .offset = SZ_128K, - /* - * 0x5f0000 bytes big in the multi-language ("EFIGS") version, - * 0x7b0000 bytes in the English-only ("enUS") version. - */ - .size = 0x7b0000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data palmz71_rom_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = palmz71_rom_partitions, - .nr_parts = ARRAY_SIZE(palmz71_rom_partitions), -}; - -static struct resource palmz71_rom_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device palmz71_rom_device = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = &palmz71_rom_data, - }, - .num_resources = 1, - .resource = &palmz71_rom_resource, -}; - -static struct platform_device palmz71_lcd_device = { - .name = "lcd_palmz71", - .id = -1, -}; - -static struct platform_device palmz71_spi_device = { - .name = "spi_palmz71", - .id = -1, -}; - -static struct omap_backlight_config palmz71_backlight_config = { - .default_intensity = 0xa0, -}; - -static struct platform_device palmz71_backlight_device = { - .name = "omap-bl", - .id = -1, - .dev = { - .platform_data = &palmz71_backlight_config, - }, -}; - -static struct platform_device *devices[] __initdata = { - &palmz71_rom_device, - &palmz71_kp_device, - &palmz71_lcd_device, - &palmz71_spi_device, - &palmz71_backlight_device, -}; - -static int -palmz71_get_pendown_state(void) -{ - return !gpio_get_value(PALMZ71_PENIRQ_GPIO); -} - -static const struct ads7846_platform_data palmz71_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = palmz71_get_pendown_state, -}; - -static struct spi_board_info __initdata palmz71_boardinfo[] = { { - /* MicroWire (bus 2) CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &palmz71_ts_info, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 2, - .chip_select = 0, -} }; - -static struct omap_usb_config palmz71_usb_config __initdata = { - .register_dev = 1, /* Mini-B only receptacle */ - .hmc_mode = 0, - .pins[0] = 2, -}; - -static const struct omap_lcd_config palmz71_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static irqreturn_t -palmz71_powercable(int irq, void *dev_id) -{ - if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { - printk(KERN_INFO "PM: Power cable connected\n"); - irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_FALLING); - } else { - printk(KERN_INFO "PM: Power cable disconnected\n"); - irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_RISING); - } - return IRQ_HANDLED; -} - -static void __init -omap_mpu_wdt_mode(int mode) -{ - if (mode) - omap_writew(0x8000, OMAP_WDT_TIMER_MODE); - else { - omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); - omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); - } -} - -static void __init -palmz71_gpio_setup(int early) -{ - if (early) { - /* Only set GPIO1 so we have a working serial */ - gpio_direction_output(1, 1); - } else { - /* Set MMC/SD host WP pin as input */ - if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) { - printk(KERN_ERR "Could not reserve WP GPIO!\n"); - return; - } - gpio_direction_input(PALMZ71_MMC_WP_GPIO); - - /* Monitor the Power-cable-connected signal */ - if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) { - printk(KERN_ERR - "Could not reserve cable signal GPIO!\n"); - return; - } - gpio_direction_input(PALMZ71_USBDETECT_GPIO); - if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - palmz71_powercable, 0, "palmz71-cable", NULL)) - printk(KERN_ERR - "IRQ request for power cable failed!\n"); - palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); - } -} - -static void __init -omap_palmz71_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - palmz71_gpio_setup(1); - omap_mpu_wdt_mode(0); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO); - spi_register_board_info(palmz71_boardinfo, - ARRAY_SIZE(palmz71_boardinfo)); - omap1_usb_init(&palmz71_usb_config); - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - palmz71_gpio_setup(0); - - omapfb_set_lcd_config(&palmz71_lcd_config); -} - -MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_palmz71_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c deleted file mode 100644 index b041e6f6e9cf..000000000000 --- a/arch/arm/mach-omap1/board-perseus2.c +++ /dev/null @@ -1,333 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-perseus2.c - * - * Modified from board-generic.c - * - * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> - * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/soc/ti/omap1-io.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -static const unsigned int p2_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_LEFT), - KEY(3, 0, KEY_DOWN), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_F10), - KEY(1, 1, KEY_SEND), - KEY(2, 1, KEY_END), - KEY(3, 1, KEY_VOLUMEDOWN), - KEY(4, 1, KEY_VOLUMEUP), - KEY(5, 1, KEY_RECORD), - KEY(0, 2, KEY_F9), - KEY(1, 2, KEY_3), - KEY(2, 2, KEY_6), - KEY(3, 2, KEY_9), - KEY(4, 2, KEY_KPDOT), - KEY(0, 3, KEY_BACK), - KEY(1, 3, KEY_2), - KEY(2, 3, KEY_5), - KEY(3, 3, KEY_8), - KEY(4, 3, KEY_0), - KEY(5, 3, KEY_KPSLASH), - KEY(0, 4, KEY_HOME), - KEY(1, 4, KEY_1), - KEY(2, 4, KEY_4), - KEY(3, 4, KEY_7), - KEY(4, 4, KEY_KPASTERISK), - KEY(5, 4, KEY_POWER), -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ - .end = H2P2_DBG_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_7XX_MPU_EXT_NIRQ, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - }, -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - }, -}; - -static struct resource nand_resource = { - .start = OMAP_CS3_PHYS, - .end = OMAP_CS3_PHYS + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_data, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data p2_keymap_data = { - .keymap = p2_keymap, - .keymap_size = ARRAY_SIZE(p2_keymap), -}; - -static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &p2_keymap_data, - .delay = 4, - .dbounce = true, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &kp_device, -}; - -static const struct omap_lcd_config perseus2_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init perseus2_init_smc91x(void) -{ - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - -static void __init omap_perseus2_init(void) -{ - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, - OMAP7XX_IO_CONF_9); - - perseus2_init_smc91x(); - - BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(P2_NAND_RB_GPIO_PIN); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* Mux pins for keypad */ - omap_cfg_reg(E2_7XX_KBR0); - omap_cfg_reg(J7_7XX_KBR1); - omap_cfg_reg(E1_7XX_KBR2); - omap_cfg_reg(F3_7XX_KBR3); - omap_cfg_reg(D2_7XX_KBR4); - omap_cfg_reg(C2_7XX_KBC0); - omap_cfg_reg(D3_7XX_KBC1); - omap_cfg_reg(E4_7XX_KBC2); - omap_cfg_reg(F4_7XX_KBC3); - omap_cfg_reg(E3_7XX_KBC4); - - if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) { - /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&perseus2_lcd_config); -} - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc omap_perseus2_io_desc[] __initdata = { - { - .virtual = H2P2_DBG_FPGA_BASE, - .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), - .length = H2P2_DBG_FPGA_SIZE, - .type = MT_DEVICE - } -}; - -static void __init omap_perseus2_map_io(void) -{ - omap7xx_map_io(); - iotable_init(omap_perseus2_io_desc, - ARRAY_SIZE(omap_perseus2_io_desc)); -} - -MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") - /* Maintainer: Kevin Hilman <kjh@hilman.org> */ - .atag_offset = 0x100, - .map_io = omap_perseus2_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_perseus2_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index f0dbb0e8d8e7..0c0cdd5e77c7 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -335,7 +335,7 @@ static void __init omap_sx1_init(void) MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, .handle_irq = omap1_handle_irq, diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 96d846c37c43..c58d200e4816 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -720,8 +720,6 @@ int __init omap1_clk_init(void) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) cpu_mask |= CK_1510; - if (cpu_is_omap7xx()) - cpu_mask |= CK_7XX; if (cpu_is_omap310()) cpu_mask |= CK_310; @@ -730,9 +728,6 @@ int __init omap1_clk_init(void) ck_dpll1_p = &ck_dpll1; ck_ref_p = &ck_ref; - if (cpu_is_omap7xx()) - ck_ref.rate = 13000000; - pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), omap_readw(ARM_CKCTL)); @@ -771,12 +766,6 @@ int __init omap1_clk_init(void) } } - if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, - OMAP7XX_PCC_UPLD_CTRL); - } - /* Amstrad Delta wants BCLK high when inactive */ if (machine_is_ams_delta()) omap_writel(omap_readl(ULPD_CLOCK_CTRL) | @@ -784,11 +773,7 @@ int __init omap1_clk_init(void) ULPD_CLOCK_CTRL); /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); - else - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); /* Put DSP/MPUI into reset until needed */ omap_writew(0, ARM_RSTCT1); diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index 5ceff05e15c0..7a7c3d9eb84a 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -35,34 +35,6 @@ #include "soc.h" #include "i2c.h" -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -void omap7xx_map_io(void); -#else -static inline void omap7xx_map_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -void omap1510_fpga_init_irq(void); -void omap15xx_map_io(void); -#else -static inline void omap1510_fpga_init_irq(void) -{ -} -static inline void omap15xx_map_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP16XX -void omap16xx_map_io(void); -#else -static inline void omap16xx_map_io(void) -{ -} -#endif - #ifdef CONFIG_OMAP_SERIAL_WAKE int omap_serial_wakeup_init(void); #else @@ -72,6 +44,7 @@ static inline int omap_serial_wakeup_init(void) } #endif +void omap1_map_io(void); void omap1_init_early(void); void omap1_init_irq(void); void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 80e94770582a..5304699c7a97 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -21,7 +21,6 @@ #include "tc.h" #include "mux.h" -#include "omap7xx.h" #include "hardware.h" #include "common.h" #include "clock.h" @@ -63,8 +62,6 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -static inline void omap_init_mbox(void) { } - /*-------------------------------------------------------------------------*/ #if IS_ENABLED(CONFIG_MMC_OMAP) @@ -73,22 +70,16 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { if (controller_nr == 0) { - if (cpu_is_omap7xx()) { - omap_cfg_reg(MMC_7XX_CMD); - omap_cfg_reg(MMC_7XX_CLK); - omap_cfg_reg(MMC_7XX_DAT0); - } else { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); - } + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); if (cpu_is_omap1710()) { omap_cfg_reg(M15_1710_MMC_CLKI); omap_cfg_reg(P19_1710_MMC_CMDDIR); omap_cfg_reg(P20_1710_MMC_DATDIR0); } - if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) { + if (mmc_controller->slots[0].wires == 4) { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ if (!mmc_controller->slots[0].nomux) @@ -154,8 +145,6 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; - if (cpu_is_omap7xx()) - data->slots[0].features = MMC_OMAP7XX; if (cpu_is_omap15xx()) data->slots[0].features = MMC_OMAP15XX; if (cpu_is_omap16xx()) @@ -224,43 +213,6 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ -/* OMAP7xx SPI support */ -#if IS_ENABLED(CONFIG_SPI_OMAP_100K) - -struct platform_device omap_spi1 = { - .name = "omap1_spi100k", - .id = 1, -}; - -struct platform_device omap_spi2 = { - .name = "omap1_spi100k", - .id = 2, -}; - -static void omap_init_spi100k(void) -{ - if (!cpu_is_omap7xx()) - return; - - omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); - if (omap_spi1.dev.platform_data) - platform_device_register(&omap_spi1); - - omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff); - if (omap_spi2.dev.platform_data) - platform_device_register(&omap_spi2); -} - -#else -static inline void omap_init_spi100k(void) -{ -} -#endif - -/*-------------------------------------------------------------------------*/ - -static inline void omap_init_sti(void) {} - /* Numbering for the SPI-capable controllers when used for SPI: * spi = 1 * uwire = 2 @@ -363,10 +315,7 @@ static int __init omap1_init_devices(void) * in alphabetical order so they're easier to sort through. */ - omap_init_mbox(); omap_init_rtc(); - omap_init_spi100k(); - omap_init_sti(); omap_init_uwire(); omap1_init_rng(); diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index c3f280c3c5d7..756966cb715f 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -261,22 +261,6 @@ static const struct platform_device_info omap_dma_dev_info = { .num_res = 1, }; -/* OMAP730, OMAP850 */ -static const struct dma_slave_map omap7xx_sdma_map[] = { - { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, - { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, - { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) }, - { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) }, - { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, - { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, - { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, - { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, - { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, - { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, - { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, - { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, -}; - /* OMAP1510, OMAP1610*/ static const struct dma_slave_map omap1xxx_sdma_map[] = { { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, @@ -371,13 +355,8 @@ static int __init omap1_system_dma_init(void) p.dma_attr = d; p.errata = configure_dma_errata(); - if (cpu_is_omap7xx()) { - p.slave_map = omap7xx_sdma_map; - p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map); - } else { - p.slave_map = omap1xxx_sdma_map; - p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map); - } + p.slave_map = omap1xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map); ret = platform_device_add_data(pdev, &p, sizeof(p)); if (ret) { diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c deleted file mode 100644 index 4c71a195969f..000000000000 --- a/arch/arm/mach-omap1/fpga.c +++ /dev/null @@ -1,186 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/fpga.c - * - * Interrupt handler for OMAP-1510 Innovator FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -static void fpga_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; - - if (irq < 8) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) - & ~(1 << irq)), OMAP1510_FPGA_IMR_LO); - else if (irq < 16) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI) - & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI); - else - __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2) - & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2); -} - - -static inline u32 get_fpga_unmasked_irqs(void) -{ - return - ((__raw_readb(OMAP1510_FPGA_ISR_LO) & - __raw_readb(OMAP1510_FPGA_IMR_LO))) | - ((__raw_readb(OMAP1510_FPGA_ISR_HI) & - __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) | - ((__raw_readb(INNOVATOR_FPGA_ISR2) & - __raw_readb(INNOVATOR_FPGA_IMR2)) << 16); -} - - -static void fpga_ack_irq(struct irq_data *d) -{ - /* Don't need to explicitly ACK FPGA interrupts */ -} - -static void fpga_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; - - if (irq < 8) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)), - OMAP1510_FPGA_IMR_LO); - else if (irq < 16) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI) - | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI); - else - __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2) - | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2); -} - -static void fpga_mask_ack_irq(struct irq_data *d) -{ - fpga_mask_irq(d); - fpga_ack_irq(d); -} - -static void innovator_fpga_IRQ_demux(struct irq_desc *desc) -{ - u32 stat; - int fpga_irq; - - stat = get_fpga_unmasked_irqs(); - - if (!stat) - return; - - for (fpga_irq = OMAP_FPGA_IRQ_BASE; - (fpga_irq < OMAP_FPGA_IRQ_END) && stat; - fpga_irq++, stat >>= 1) { - if (stat & 1) { - generic_handle_irq(fpga_irq); - } - } -} - -static struct irq_chip omap_fpga_irq_ack = { - .name = "FPGA-ack", - .irq_ack = fpga_mask_ack_irq, - .irq_mask = fpga_mask_irq, - .irq_unmask = fpga_unmask_irq, -}; - - -static struct irq_chip omap_fpga_irq = { - .name = "FPGA", - .irq_ack = fpga_ack_irq, - .irq_mask = fpga_mask_irq, - .irq_unmask = fpga_unmask_irq, -}; - -/* - * All of the FPGA interrupt request inputs except for the touchscreen are - * edge-sensitive; the touchscreen is level-sensitive. The edge-sensitive - * interrupts are acknowledged as a side-effect of reading the interrupt - * status register from the FPGA. The edge-sensitive interrupt inputs - * cause a problem with level interrupt requests, such as Ethernet. The - * problem occurs when a level interrupt request is asserted while its - * interrupt input is masked in the FPGA, which results in a missed - * interrupt. - * - * In an attempt to workaround the problem with missed interrupts, the - * mask_ack routine for all of the FPGA interrupts has been changed from - * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt - * being serviced is left unmasked. We can do this because the FPGA cascade - * interrupt is run with all interrupts masked. - * - * Limited testing indicates that this workaround appears to be effective - * for the smc9194 Ethernet driver used on the Innovator. It should work - * on other FPGA interrupts as well, but any drivers that explicitly mask - * interrupts at the interrupt controller via disable_irq/enable_irq - * could pose a problem. - */ -void omap1510_fpga_init_irq(void) -{ - int i, res; - - __raw_writeb(0, OMAP1510_FPGA_IMR_LO); - __raw_writeb(0, OMAP1510_FPGA_IMR_HI); - __raw_writeb(0, INNOVATOR_FPGA_IMR2); - - for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) { - - if (i == OMAP1510_INT_FPGA_TS) { - /* - * The touchscreen interrupt is level-sensitive, so - * we'll use the regular mask_ack routine for it. - */ - irq_set_chip(i, &omap_fpga_irq_ack); - } - else { - /* - * All FPGA interrupts except the touchscreen are - * edge-sensitive, so we won't mask them. - */ - irq_set_chip(i, &omap_fpga_irq); - } - - irq_set_handler(i, handle_edge_irq); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } - - /* - * The FPGA interrupt line is connected to GPIO13. Claim this pin for - * the ARM. - * - * NOTE: For general GPIO/MPUIO access and interrupts, please see - * gpio.[ch] - */ - res = gpio_request(13, "FPGA irq"); - if (res) { - pr_err("%s failed to get gpio\n", __func__); - return; - } - gpio_direction_input(13); - irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); -} diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h deleted file mode 100644 index 7e7450edacc1..000000000000 --- a/arch/arm/mach-omap1/fpga.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -#endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index c675f11de99d..61fa26efd865 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -11,6 +11,7 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/soc/ti/omap1-soc.h> +#include <asm/irq.h> #include "irqs.h" diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c deleted file mode 100644 index c372b357eab4..000000000000 --- a/arch/arm/mach-omap1/gpio7xx.c +++ /dev/null @@ -1,272 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * OMAP7xx specific gpio init - * - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ - * - * Author: - * Charulatha V <charu@ti.com> - */ - -#include <linux/gpio.h> -#include <linux/platform_data/gpio-omap.h> - -#include "irqs.h" -#include "soc.h" - -#define OMAP7XX_GPIO1_BASE 0xfffbc000 -#define OMAP7XX_GPIO2_BASE 0xfffbc800 -#define OMAP7XX_GPIO3_BASE 0xfffbd000 -#define OMAP7XX_GPIO4_BASE 0xfffbd800 -#define OMAP7XX_GPIO5_BASE 0xfffbe000 -#define OMAP7XX_GPIO6_BASE 0xfffbe800 -#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE - -/* mpu gpio */ -static struct resource omap7xx_mpu_gpio_resources[] = { - { - .start = OMAP1_MPUIO_VBASE, - .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_MPUIO, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { - .revision = USHRT_MAX, - .direction = OMAP_MPUIO_IO_CNTL / 2, - .datain = OMAP_MPUIO_INPUT_LATCH / 2, - .dataout = OMAP_MPUIO_OUTPUT / 2, - .irqstatus = OMAP_MPUIO_GPIO_INT / 2, - .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, - .irqenable_inv = true, - .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, -}; - -static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = { - .is_mpuio = true, - .bank_width = 16, - .bank_stride = 2, - .regs = &omap7xx_mpuio_regs, -}; - -static struct platform_device omap7xx_mpu_gpio = { - .name = "omap_gpio", - .id = 0, - .dev = { - .platform_data = &omap7xx_mpu_gpio_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources), - .resource = omap7xx_mpu_gpio_resources, -}; - -/* gpio1 */ -static struct resource omap7xx_gpio1_resources[] = { - { - .start = OMAP7XX_GPIO1_BASE, - .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_reg_offs omap7xx_gpio_regs = { - .revision = USHRT_MAX, - .direction = OMAP7XX_GPIO_DIR_CONTROL, - .datain = OMAP7XX_GPIO_DATA_INPUT, - .dataout = OMAP7XX_GPIO_DATA_OUTPUT, - .irqstatus = OMAP7XX_GPIO_INT_STATUS, - .irqenable = OMAP7XX_GPIO_INT_MASK, - .irqenable_inv = true, - .irqctrl = OMAP7XX_GPIO_INT_CONTROL, -}; - -static struct omap_gpio_platform_data omap7xx_gpio1_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio1 = { - .name = "omap_gpio", - .id = 1, - .dev = { - .platform_data = &omap7xx_gpio1_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio1_resources), - .resource = omap7xx_gpio1_resources, -}; - -/* gpio2 */ -static struct resource omap7xx_gpio2_resources[] = { - { - .start = OMAP7XX_GPIO2_BASE, - .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio2_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio2 = { - .name = "omap_gpio", - .id = 2, - .dev = { - .platform_data = &omap7xx_gpio2_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio2_resources), - .resource = omap7xx_gpio2_resources, -}; - -/* gpio3 */ -static struct resource omap7xx_gpio3_resources[] = { - { - .start = OMAP7XX_GPIO3_BASE, - .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio3_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio3 = { - .name = "omap_gpio", - .id = 3, - .dev = { - .platform_data = &omap7xx_gpio3_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio3_resources), - .resource = omap7xx_gpio3_resources, -}; - -/* gpio4 */ -static struct resource omap7xx_gpio4_resources[] = { - { - .start = OMAP7XX_GPIO4_BASE, - .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK4, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio4_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio4 = { - .name = "omap_gpio", - .id = 4, - .dev = { - .platform_data = &omap7xx_gpio4_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio4_resources), - .resource = omap7xx_gpio4_resources, -}; - -/* gpio5 */ -static struct resource omap7xx_gpio5_resources[] = { - { - .start = OMAP7XX_GPIO5_BASE, - .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio5_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio5 = { - .name = "omap_gpio", - .id = 5, - .dev = { - .platform_data = &omap7xx_gpio5_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio5_resources), - .resource = omap7xx_gpio5_resources, -}; - -/* gpio6 */ -static struct resource omap7xx_gpio6_resources[] = { - { - .start = OMAP7XX_GPIO6_BASE, - .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio6_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio6 = { - .name = "omap_gpio", - .id = 6, - .dev = { - .platform_data = &omap7xx_gpio6_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio6_resources), - .resource = omap7xx_gpio6_resources, -}; - -static struct platform_device *omap7xx_gpio_dev[] __initdata = { - &omap7xx_mpu_gpio, - &omap7xx_gpio1, - &omap7xx_gpio2, - &omap7xx_gpio3, - &omap7xx_gpio4, - &omap7xx_gpio5, - &omap7xx_gpio6, -}; - -/* - * omap7xx_gpio_init needs to be done before - * machine_init functions access gpio APIs. - * Hence omap7xx_gpio_init is a postcore_initcall. - */ -static int __init omap7xx_gpio_init(void) -{ - int i; - - if (!cpu_is_omap7xx()) - return -EINVAL; - - for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) - platform_device_register(omap7xx_gpio_dev[i]); - - return 0; -} -postcore_initcall(omap7xx_gpio_init); diff --git a/arch/arm/mach-omap1/hardware.h b/arch/arm/mach-omap1/hardware.h index c228234a1ed4..0aa571c9e0eb 100644 --- a/arch/arm/mach-omap1/hardware.h +++ b/arch/arm/mach-omap1/hardware.h @@ -114,6 +114,10 @@ static inline u32 omap_cs3_phys(void) #define OMAP_IH1_BASE 0xfffecb00 #define OMAP_IH2_BASE 0xfffe0000 +#define OMAP_IH2_0_BASE (0xfffe0000) +#define OMAP_IH2_1_BASE (0xfffe0100) +#define OMAP_IH2_2_BASE (0xfffe0200) +#define OMAP_IH2_3_BASE (0xfffe0300) #define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) #define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) @@ -131,6 +135,38 @@ static inline u32 omap_cs3_phys(void) #define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) #define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) +#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) +#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) +#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) +#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) +#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) +#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) +#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) + +#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) +#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) +#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) +#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) +#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) +#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) +#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) + +#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) +#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) +#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) +#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) +#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) +#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) +#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) + +#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) +#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) +#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) +#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) +#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) +#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) +#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) + #define IRQ_ITR_REG_OFFSET 0x00 #define IRQ_MIR_REG_OFFSET 0x04 #define IRQ_SIR_IRQ_REG_OFFSET 0x10 @@ -184,12 +220,16 @@ static inline u32 omap_cs3_phys(void) /* * --------------------------------------------------------------------------- - * Processor specific defines + * DSP * --------------------------------------------------------------------------- */ -#include "omap7xx.h" -#include "omap1510.h" -#include "omap16xx.h" +#define OMAP1_DSP_BASE 0xE0000000 +#define OMAP1_DSP_SIZE 0x28000 +#define OMAP1_DSP_START 0xE0000000 + +#define OMAP1_DSPREG_BASE 0xE1000000 +#define OMAP1_DSPREG_SIZE SZ_128K +#define OMAP1_DSPREG_START 0xE1000000 #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 22f945360599..94d3e7883e02 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -25,13 +25,8 @@ static struct platform_device omap_i2c_devices[1] = { static void __init omap1_i2c_mux_pins(int bus_id) { - if (cpu_is_omap7xx()) { - omap_cfg_reg(I2C_7XX_SDA); - omap_cfg_reg(I2C_7XX_SCL); - } else { - omap_cfg_reg(I2C_SDA); - omap_cfg_reg(I2C_SCL); - } + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); } int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, @@ -68,10 +63,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, /* how the cpu bus is wired up differs for 7xx only */ - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; pdev->dev.platform_data = pdata; diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d2db9b8aed3f..1f20fe99be57 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -22,94 +22,32 @@ * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -static struct map_desc omap_io_desc[] __initdata = { +static struct map_desc omap1_io_desc[] __initdata = { { .virtual = OMAP1_IO_VIRT, .pfn = __phys_to_pfn(OMAP1_IO_PHYS), .length = OMAP1_IO_SIZE, .type = MT_DEVICE - } -}; - -#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct map_desc omap7xx_io_desc[] __initdata = { - { - .virtual = OMAP7XX_DSP_BASE, - .pfn = __phys_to_pfn(OMAP7XX_DSP_START), - .length = OMAP7XX_DSP_SIZE, - .type = MT_DEVICE }, { - .virtual = OMAP7XX_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), - .length = OMAP7XX_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -static struct map_desc omap1510_io_desc[] __initdata = { - { - .virtual = OMAP1510_DSP_BASE, - .pfn = __phys_to_pfn(OMAP1510_DSP_START), - .length = OMAP1510_DSP_SIZE, - .type = MT_DEVICE - }, { - .virtual = OMAP1510_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP1510_DSPREG_START), - .length = OMAP1510_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -static struct map_desc omap16xx_io_desc[] __initdata = { - { - .virtual = OMAP16XX_DSP_BASE, - .pfn = __phys_to_pfn(OMAP16XX_DSP_START), - .length = OMAP16XX_DSP_SIZE, + .virtual = OMAP1_DSP_BASE, + .pfn = __phys_to_pfn(OMAP1_DSP_START), + .length = OMAP1_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP16XX_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START), - .length = OMAP16XX_DSPREG_SIZE, + .virtual = OMAP1_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP1_DSPREG_START), + .length = OMAP1_DSPREG_SIZE, .type = MT_DEVICE } }; -#endif /* * Maps common IO regions for omap1 */ -static void __init omap1_map_common_io(void) -{ - iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); -} - -#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -void __init omap7xx_map_io(void) -{ - omap1_map_common_io(); - iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); -} -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -void __init omap15xx_map_io(void) -{ - omap1_map_common_io(); - iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); -} -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -void __init omap16xx_map_io(void) +void __init omap1_map_io(void) { - omap1_map_common_io(); - iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); + iotable_init(omap1_io_desc, ARRAY_SIZE(omap1_io_desc)); } -#endif /* * Common low-level hardware init for omap1. diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 70868e9f19ac..9ccc784fd614 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -110,14 +110,6 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) irq_bank_writel(val, bank, offset); } -#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct omap_irq_bank omap7xx_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - #ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, @@ -194,12 +186,6 @@ void __init omap1_init_irq(void) int i, j, irq_base; unsigned long nr_irqs; -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - irq_banks = omap7xx_irq_banks; - irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); - } -#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; @@ -230,7 +216,7 @@ void __init omap1_init_irq(void) pr_warn("Couldn't allocate IRQ numbers\n"); irq_base = 0; } - omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base; + omap_l2_irq = irq_base; omap_l2_irq -= NR_IRQS_LEGACY; domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0, @@ -249,10 +235,6 @@ void __init omap1_init_irq(void) irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET); irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); - /* Enable interrupts in global mask */ - if (cpu_is_omap7xx()) - irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); - /* Install the interrupt handlers for each bank */ for (i = 0; i < irq_bank_count; i++) { for (j = i * 32; j < (i + 1) * 32; j++) { diff --git a/arch/arm/mach-omap1/irqs.h b/arch/arm/mach-omap1/irqs.h index 2851acfe5ff3..3ab7050b1b6b 100644 --- a/arch/arm/mach-omap1/irqs.h +++ b/arch/arm/mach-omap1/irqs.h @@ -231,15 +231,6 @@ #define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) #define OMAP_IRQ_END (IH_MPUIO_BASE + 16) -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - #define OMAP_IRQ_BIT(irq) (1 << ((irq - NR_IRQS_LEGACY) % 32)) #ifdef CONFIG_FIQ diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 05c25c432449..37863bdce9ea 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -89,84 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { #define OMAP1610_MCBSP2_BASE 0xfffb1000 #define OMAP1610_MCBSP3_BASE 0xe1017000 -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -struct resource omap7xx_mcbsp_res[][6] = { - { - { - .start = OMAP7XX_MCBSP1_BASE, - .end = OMAP7XX_MCBSP1_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_7XX_McBSP1RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_7XX_McBSP1TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = 9, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = 8, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP7XX_MCBSP2_BASE, - .end = OMAP7XX_MCBSP2_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_7XX_McBSP2RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_7XX_McBSP2TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = 11, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = 10, - .flags = IORESOURCE_DMA, - }, - }, -}; - -#define omap7xx_mcbsp_res_0 omap7xx_mcbsp_res[0] - -static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { - { - .ops = &omap1_mcbsp_ops, - }, - { - .ops = &omap1_mcbsp_ops, - }, -}; -#define OMAP7XX_MCBSP_RES_SZ ARRAY_SIZE(omap7xx_mcbsp_res[1]) -#define OMAP7XX_MCBSP_COUNT ARRAY_SIZE(omap7xx_mcbsp_res) -#else -#define omap7xx_mcbsp_res_0 NULL -#define omap7xx_mcbsp_pdata NULL -#define OMAP7XX_MCBSP_RES_SZ 0 -#define OMAP7XX_MCBSP_COUNT 0 -#endif - -#ifdef CONFIG_ARCH_OMAP15XX struct resource omap15xx_mcbsp_res[][6] = { { { @@ -266,14 +188,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }; #define OMAP15XX_MCBSP_RES_SZ ARRAY_SIZE(omap15xx_mcbsp_res[1]) #define OMAP15XX_MCBSP_COUNT ARRAY_SIZE(omap15xx_mcbsp_res) -#else -#define omap15xx_mcbsp_res_0 NULL -#define omap15xx_mcbsp_pdata NULL -#define OMAP15XX_MCBSP_RES_SZ 0 -#define OMAP15XX_MCBSP_COUNT 0 -#endif -#ifdef CONFIG_ARCH_OMAP16XX struct resource omap16xx_mcbsp_res[][6] = { { { @@ -373,12 +288,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }; #define OMAP16XX_MCBSP_RES_SZ ARRAY_SIZE(omap16xx_mcbsp_res[1]) #define OMAP16XX_MCBSP_COUNT ARRAY_SIZE(omap16xx_mcbsp_res) -#else -#define omap16xx_mcbsp_res_0 NULL -#define omap16xx_mcbsp_pdata NULL -#define OMAP16XX_MCBSP_RES_SZ 0 -#define OMAP16XX_MCBSP_COUNT 0 -#endif static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, struct omap_mcbsp_platform_data *config, int size) @@ -418,12 +327,6 @@ static int __init omap1_mcbsp_init(void) if (!cpu_class_is_omap1()) return -ENODEV; - if (cpu_is_omap7xx()) - omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0, - OMAP7XX_MCBSP_RES_SZ, - omap7xx_mcbsp_pdata, - OMAP7XX_MCBSP_COUNT); - if (cpu_is_omap15xx()) omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0, OMAP15XX_MCBSP_RES_SZ, diff --git a/arch/arm/mach-omap1/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h index 5ae312ff08a1..cbeda46dd526 100644 --- a/arch/arm/mach-omap1/mtd-xip.h +++ b/arch/arm/mach-omap1/mtd-xip.h @@ -42,11 +42,7 @@ static inline unsigned long xip_omap_mpu_timer_read(int nr) * (see linux/mtd/xip.h) */ -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) -#else #define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) -#endif /* * xip_cpu_idle() is used when waiting for a delay equal or larger than diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 2d9458ff1d29..4456fbc8aa3d 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -21,52 +21,6 @@ static struct omap_mux_cfg arch_mux_cfg; -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct pin_config omap7xx_pins[] = { -MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0) -MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0) -MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) - -/* MMC Pins */ -MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) -MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) -MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) - -/* I2C interface */ -MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) -MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) - -/* SPI pins */ -MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0) -MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0) -MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0) -MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0) -MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0) -MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0) - -/* UART pins */ -MUX_CFG_7XX("UART_7XX_1", 3, 21, 0, 20, 0, 0) -MUX_CFG_7XX("UART_7XX_2", 8, 1, 6, 0, 0, 0) -}; -#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) -#else -#define omap7xx_pins NULL -#define OMAP7XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ - #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config omap1xxx_pins[] = { /* @@ -489,12 +443,6 @@ EXPORT_SYMBOL(omap_cfg_reg); int __init omap1_mux_init(void) { - if (cpu_is_omap7xx()) { - arch_mux_cfg.pins = omap7xx_pins; - arch_mux_cfg.size = OMAP7XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap1_cfg_reg; - } - if (cpu_is_omap15xx() || cpu_is_omap16xx()) { arch_mux_cfg.pins = omap1xxx_pins; arch_mux_cfg.size = OMAP1XXX_PINS_SZ; diff --git a/arch/arm/mach-omap1/omap1510.h b/arch/arm/mach-omap1/omap1510.h deleted file mode 100644 index 3d235244bf5c..000000000000 --- a/arch/arm/mach-omap1/omap1510.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Hardware definitions for TI OMAP1510 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP15XX_H -#define __ASM_ARCH_OMAP15XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP1510_DSP_BASE 0xE0000000 -#define OMAP1510_DSP_SIZE 0x28000 -#define OMAP1510_DSP_START 0xE0000000 - -#define OMAP1510_DSPREG_BASE 0xE1000000 -#define OMAP1510_DSPREG_SIZE SZ_128K -#define OMAP1510_DSPREG_START 0xE1000000 - -#define OMAP1510_DSP_MMU_BASE (0xfffed200) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif /* __ASM_ARCH_OMAP15XX_H */ - diff --git a/arch/arm/mach-omap1/omap16xx.h b/arch/arm/mach-omap1/omap16xx.h deleted file mode 100644 index cd1c724869c7..000000000000 --- a/arch/arm/mach-omap1/omap16xx.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Hardware definitions for TI OMAP1610/5912/1710 processors. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP16XX_H -#define __ASM_ARCH_OMAP16XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP16XX_DSP_BASE 0xE0000000 -#define OMAP16XX_DSP_SIZE 0x28000 -#define OMAP16XX_DSP_START 0xE0000000 - -#define OMAP16XX_DSPREG_BASE 0xE1000000 -#define OMAP16XX_DSPREG_SIZE SZ_128K -#define OMAP16XX_DSPREG_START 0xE1000000 - -#define OMAP16XX_SEC_BASE 0xFFFE4000 -#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) -#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) -#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#define OMAP_IH2_0_BASE (0xfffe0000) -#define OMAP_IH2_1_BASE (0xfffe0100) -#define OMAP_IH2_2_BASE (0xfffe0200) -#define OMAP_IH2_3_BASE (0xfffe0300) - -#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) -#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) -#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) -#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) -#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) -#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) -#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) - -#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) -#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) -#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) -#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) -#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) -#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) -#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) - -#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) -#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) -#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) -#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) -#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) -#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) -#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) - -#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) -#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) -#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) -#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) -#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) -#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) -#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -/* - * ---------------------------------------------------------------------------- - * Pin configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) -#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP1610_RESET_CONTROL 0xfffe1140 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_SWITCH_BASE (0xfffbc800) -#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) - -/* UART3 Registers Mapping through MPU bus */ -#define UART3_RHR (OMAP1_UART3_BASE + 0) -#define UART3_THR (OMAP1_UART3_BASE + 0) -#define UART3_DLL (OMAP1_UART3_BASE + 0) -#define UART3_IER (OMAP1_UART3_BASE + 4) -#define UART3_DLH (OMAP1_UART3_BASE + 4) -#define UART3_IIR (OMAP1_UART3_BASE + 8) -#define UART3_FCR (OMAP1_UART3_BASE + 8) -#define UART3_EFR (OMAP1_UART3_BASE + 8) -#define UART3_LCR (OMAP1_UART3_BASE + 0x0C) -#define UART3_MCR (OMAP1_UART3_BASE + 0x10) -#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10) -#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14) -#define UART3_LSR (OMAP1_UART3_BASE + 0x14) -#define UART3_TCR (OMAP1_UART3_BASE + 0x18) -#define UART3_MSR (OMAP1_UART3_BASE + 0x18) -#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18) -#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C) -#define UART3_SPR (OMAP1_UART3_BASE + 0x1C) -#define UART3_TLR (OMAP1_UART3_BASE + 0x1C) -#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20) -#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24) -#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28) -#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28) -#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C) -#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C) -#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30) -#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30) -#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34) -#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34) -#define UART3_BLR (OMAP1_UART3_BASE + 0x38) -#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C) -#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C) -#define UART3_SCR (OMAP1_UART3_BASE + 0x40) -#define UART3_SSR (OMAP1_UART3_BASE + 0x44) -#define UART3_EBLR (OMAP1_UART3_BASE + 0x48) -#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C) -#define UART3_MVR (OMAP1_UART3_BASE + 0x50) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* 32-bit Watchdog timer in OMAP 16XX */ -#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) -#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) -#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) -#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) -#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) -#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) -#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) -#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) -#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) -#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) - -#define WCLR_PRE_SHIFT 5 -#define WCLR_PTV_SHIFT 2 - -#define WWPS_W_PEND_WSPR (1 << 4) -#define WWPS_W_PEND_WTGR (1 << 3) -#define WWPS_W_PEND_WLDR (1 << 2) -#define WWPS_W_PEND_WCRR (1 << 1) -#define WWPS_W_PEND_WCLR (1 << 0) - -#define WSPR_ENABLE_0 (0x0000bbbb) -#define WSPR_ENABLE_1 (0x00004444) -#define WSPR_DISABLE_0 (0x0000aaaa) -#define WSPR_DISABLE_1 (0x00005555) - -#define OMAP16XX_DSP_MMU_BASE (0xfffed200) -#define OMAP16XX_MAILBOX_BASE (0xfffcf000) - -#endif /* __ASM_ARCH_OMAP16XX_H */ - diff --git a/arch/arm/mach-omap1/omap7xx.h b/arch/arm/mach-omap1/omap7xx.h deleted file mode 100644 index 63da994bc609..000000000000 --- a/arch/arm/mach-omap1/omap7xx.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Hardware definitions for TI OMAP7XX processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> - * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP7XX_H -#define __ASM_ARCH_OMAP7XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP7XX_DSP_BASE 0xE0000000 -#define OMAP7XX_DSP_SIZE 0x50000 -#define OMAP7XX_DSP_START 0xE0000000 - -#define OMAP7XX_DSPREG_BASE 0xE1000000 -#define OMAP7XX_DSPREG_SIZE SZ_128K -#define OMAP7XX_DSPREG_START 0xE1000000 - -#define OMAP7XX_SPI1_BASE 0xfffc0800 -#define OMAP7XX_SPI2_BASE 0xfffc1000 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_CONFIG_BASE 0xfffe1000 -#define OMAP7XX_IO_CONF_0 0xfffe1070 -#define OMAP7XX_IO_CONF_1 0xfffe1074 -#define OMAP7XX_IO_CONF_2 0xfffe1078 -#define OMAP7XX_IO_CONF_3 0xfffe107c -#define OMAP7XX_IO_CONF_4 0xfffe1080 -#define OMAP7XX_IO_CONF_5 0xfffe1084 -#define OMAP7XX_IO_CONF_6 0xfffe1088 -#define OMAP7XX_IO_CONF_7 0xfffe108c -#define OMAP7XX_IO_CONF_8 0xfffe1090 -#define OMAP7XX_IO_CONF_9 0xfffe1094 -#define OMAP7XX_IO_CONF_10 0xfffe1098 -#define OMAP7XX_IO_CONF_11 0xfffe109c -#define OMAP7XX_IO_CONF_12 0xfffe10a0 -#define OMAP7XX_IO_CONF_13 0xfffe10a4 - -#define OMAP7XX_MODE_1 0xfffe1010 -#define OMAP7XX_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP7XX_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_FLASH_CFG_0 0xfffecc10 -#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 -#define OMAP7XX_FLASH_CFG_1 0xfffecc14 -#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_ICR_BASE 0xfffbb800 -#define OMAP7XX_DSP_M_CTL 0xfffbb804 -#define OMAP7XX_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP7XX_H */ - diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index fce7d2b572bf..9761d8404949 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -69,7 +69,6 @@ static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -166,10 +165,7 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap7xx()) - level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); - else if (cpu_is_omap15xx()) + if (cpu_is_omap15xx()) level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | OMAP_IRQ_BIT(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) @@ -178,12 +174,7 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap7xx()) { - omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | - OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), - OMAP_IH2_1_MIR); - } else if (cpu_is_omap15xx()) { + if (cpu_is_omap15xx()) { level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_MIR); } else if (cpu_is_omap16xx()) { @@ -236,17 +227,7 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap7xx()) { - MPUI7XX_SAVE(OMAP_IH1_MIR); - MPUI7XX_SAVE(OMAP_IH2_0_MIR); - MPUI7XX_SAVE(OMAP_IH2_1_MIR); - MPUI7XX_SAVE(MPUI_CTRL); - MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); - MPUI7XX_SAVE(EMIFS_CONFIG); - MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); - - } else if (cpu_is_omap15xx()) { + if (cpu_is_omap15xx()) { MPUI1510_SAVE(OMAP_IH1_MIR); MPUI1510_SAVE(OMAP_IH2_MIR); MPUI1510_SAVE(MPUI_CTRL); @@ -288,9 +269,8 @@ void omap1_pm_suspend(void) /* stop DSP */ omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); - /* shut down dsp_ck */ - if (!cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); + /* shut down dsp_ck */ + omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2); @@ -366,13 +346,7 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap7xx()) { - MPUI7XX_RESTORE(EMIFS_CONFIG); - MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI7XX_RESTORE(OMAP_IH1_MIR); - MPUI7XX_RESTORE(OMAP_IH2_0_MIR); - MPUI7XX_RESTORE(OMAP_IH2_1_MIR); - } else if (cpu_is_omap15xx()) { + if (cpu_is_omap15xx()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); @@ -433,14 +407,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v) ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap7xx()) { - MPUI7XX_SAVE(MPUI_CTRL); - MPUI7XX_SAVE(MPUI_DSP_STATUS); - MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); - MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); - MPUI7XX_SAVE(EMIFS_CONFIG); - } else if (cpu_is_omap15xx()) { + if (cpu_is_omap15xx()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -486,21 +453,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v) ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap7xx()) { - seq_printf(m, - "MPUI7XX_CTRL_REG 0x%-8x \n" - "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" - "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI7XX_SHOW(MPUI_CTRL), - MPUI7XX_SHOW(MPUI_DSP_STATUS), - MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), - MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), - MPUI7XX_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap15xx()) { + if (cpu_is_omap15xx()) { seq_printf(m, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" @@ -634,10 +587,7 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap7xx()) { - omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, - omap7xx_cpu_suspend_sz); - } else if (cpu_is_omap15xx()) { + if (cpu_is_omap15xx()) { omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); } else if (cpu_is_omap16xx()) { @@ -652,9 +602,7 @@ static int __init omap_pm_init(void) arm_pm_idle = omap1_pm_idle; - if (cpu_is_omap7xx()) - irq = INT_7XX_WAKE_UP_REQ; - else if (cpu_is_omap16xx()) + if (cpu_is_omap16xx()) irq = INT_1610_WAKE_UP_REQ; else irq = -1; @@ -673,9 +621,7 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap7xx()) - omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); - else if (cpu_is_omap16xx()) + if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); suspend_set_ops(&omap_pm_ops); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index d9165709c532..d4373a5c4697 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -100,19 +100,6 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP7XX_IDLECT3_VAL 0x3f -#define OMAP7XX_IDLECT3 0xfffece24 -#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 - -#if !defined(CONFIG_ARCH_OMAP730) && \ - !defined(CONFIG_ARCH_OMAP850) && \ - !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) -#warning "Power management for this processor not implemented yet" -#endif - #ifndef __ASSEMBLER__ #include <linux/clk.h> @@ -125,17 +112,13 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap7xx_cpu_suspend(unsigned long, unsigned long); extern void omap1510_cpu_suspend(unsigned long, unsigned long); extern void omap1610_cpu_suspend(unsigned long, unsigned long); -extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern unsigned int omap7xx_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap7xx_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; @@ -158,10 +141,6 @@ extern void omap_serial_wake_trigger(int enable); #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] -#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) -#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] - #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] @@ -235,27 +214,6 @@ enum mpui1510_save_state { #endif }; -enum mpui7xx_save_state { - MPUI7XX_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI7XX_SLEEP_SAVE_MPUI_CTRL, - MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, - MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - MPUI7XX_SLEEP_SAVE_SIZE -#else - MPUI7XX_SLEEP_SAVE_SIZE = 0 -#endif -}; - enum mpui1610_save_state { MPUI1610_SLEEP_SAVE_START = 0, /* diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 88928fc33b2e..c7f590645774 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -106,13 +106,6 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap7xx()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; - serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; - } - if (cpu_is_omap15xx()) { serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; @@ -120,14 +113,6 @@ void __init omap_serial_init(void) } for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) { - - /* Don't look at UARTs higher than 2 for omap7xx */ - if (cpu_is_omap7xx() && i > 1) { - serial_platform_data[i].membase = NULL; - serial_platform_data[i].mapbase = 0; - continue; - } - /* Static mapping, never released */ serial_platform_data[i].membase = ioremap(serial_platform_data[i].mapbase, SZ_2K); diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index f111b79512ce..6192f52d531a 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -61,86 +61,6 @@ * */ -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - .align 3 -ENTRY(omap7xx_cpu_suspend) - - @ save registers on stack - stmfd sp!, {r0 - r12, lr} - - @ Drain write cache - mov r4, #0 - mcr p15, 0, r0, c7, c10, 4 - nop - - @ load base address of Traffic Controller - mov r6, #TCMIF_ASM_BASE & 0xff000000 - orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 - orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 - - @ prepare to put SDRAM into self-refresh manually - ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 - orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff - str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put EMIFS to Sleep - ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff - str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ do not disable PERCK (0x04) - mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ disable instruction cache - mrc p15, 0, r9, c1, c0, 0 - bic r2, r9, #0x1000 - mcr p15, 0, r2, c1, c0, 0 - nop - -/* - * Let's wait for the next wake up event to wake us up. r0 can't be - * used here because r0 holds ARM_IDLECT1 - */ - mov r2, #0 - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt -/* - * omap7xx_cpu_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack. - */ - @ re-enable Icache - mcr p15, 0, r9, c1, c0, 0 - - @ reset the ARM_IDLECT1 and ARM_IDLECT2. - strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ Restore EMIFF controls - str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ restore regs and return - ldmfd sp!, {r0 - r12, pc} - -ENTRY(omap7xx_cpu_suspend_sz) - .word . - omap7xx_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ - #ifdef CONFIG_ARCH_OMAP15XX .align 3 ENTRY(omap1510_cpu_suspend) diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c index dabf0c4defeb..26427d6be896 100644 --- a/arch/arm/mach-omap1/sram-init.c +++ b/arch/arm/mach-omap1/sram-init.c @@ -94,9 +94,7 @@ static void __init omap_detect_and_map_sram(void) omap_sram_skip = SRAM_BOOTLOADER_SZ; omap_sram_start = OMAP1_SRAM_PA; - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) + if (cpu_is_omap15xx()) omap_sram_size = 0x30000; /* 192K */ else if (cpu_is_omap1610() || cpu_is_omap1611() || cpu_is_omap1621() || cpu_is_omap1710()) @@ -133,9 +131,6 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) { BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; _omap_sram_reprogram_clock(dpllctl, ckctl); } diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index f5cd4bbf7566..81a912c1145a 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -158,7 +158,7 @@ err_free_pdata: kfree(pdata); err_free_pdev: - platform_device_unregister(pdev); + platform_device_put(pdev); return ret; } diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 0119f3ddb7a6..08d42abc4a0f 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -190,12 +190,6 @@ static struct platform_device udc_device = { static inline void udc_device_init(struct omap_usb_config *pdata) { - /* IRQ numbers for omap7xx */ - if(cpu_is_omap7xx()) { - udc_resources[1].start = INT_7XX_USB_GENI; - udc_resources[2].start = INT_7XX_USB_NON_ISO; - udc_resources[3].start = INT_7XX_USB_ISO; - } pdata->udc_device = &udc_device; } @@ -238,8 +232,6 @@ static inline void ohci_device_init(struct omap_usb_config *pdata) if (!IS_ENABLED(CONFIG_USB_OHCI_HCD)) return; - if (cpu_is_omap7xx()) - ohci_resources[1].start = INT_7XX_USB_HHC_1; pdata->ohci_device = &ohci_device; pdata->ocpi_enable = &ocpi_enable; } @@ -267,8 +259,6 @@ static struct platform_device otg_device = { static inline void otg_device_init(struct omap_usb_config *pdata) { - if (cpu_is_omap7xx()) - otg_resources[1].start = INT_7XX_USB_OTG; pdata->otg_device = &otg_device; } @@ -297,14 +287,7 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) } if (is_device) { - if (cpu_is_omap7xx()) { - omap_cfg_reg(AA17_7XX_USB_DM); - omap_cfg_reg(W16_7XX_USB_PU_EN); - omap_cfg_reg(W17_7XX_USB_VBUSI); - omap_cfg_reg(W18_7XX_USB_DMCK_OUT); - omap_cfg_reg(W19_7XX_USB_DCRST); - } else - omap_cfg_reg(W4_USB_PUEN); + omap_cfg_reg(W4_USB_PUEN); } if (nwires == 2) { @@ -324,14 +307,11 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) * - OTG support on this port not yet written */ - /* Don't do this for omap7xx -- it causes USB to not work correctly */ - if (!cpu_is_omap7xx()) { - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~(7 << 4); - if (!is_device) - l |= (3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); - } + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(7 << 4); + if (!is_device) + l |= (3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); return 3 << 16; } @@ -698,7 +678,7 @@ void __init omap1_usb_init(struct omap_usb_config *_pdata) ohci_device_init(pdata); otg_device_init(pdata); - if (cpu_is_omap7xx() || cpu_is_omap16xx()) + if (cpu_is_omap16xx()) omap_otg_init(pdata); else if (cpu_is_omap15xx()) omap_1510_usb_init(pdata); |