summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ixp4xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ixp4xx')
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig8
-rw-r--r--arch/arm/mach-ixp4xx/Makefile1
-rw-r--r--arch/arm/mach-ixp4xx/common-pci.c23
-rw-r--r--arch/arm/mach-ixp4xx/common.c21
-rw-r--r--arch/arm/mach-ixp4xx/coyote-pci.c3
-rw-r--r--arch/arm/mach-ixp4xx/coyote-setup.c12
-rw-r--r--arch/arm/mach-ixp4xx/gtwx5715-setup.c16
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-pci.c5
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c17
-rw-r--r--arch/arm/mach-ixp4xx/ixdpg425-pci.c3
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-pci.c71
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-power.c67
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c134
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-pci.c8
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-power.c3
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c1
16 files changed, 345 insertions, 48 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 385285851cb5..daadc78e271b 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -71,6 +71,14 @@ config ARCH_PRPMC1100
PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_NAS100D
+ bool
+ prompt "NAS100D"
+ help
+ Say 'Y' here if you want your kernel to support Iomega's
+ NAS 100d device. For more information on this platform,
+ see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
+
#
# Avila and IXDP share the same source for now. Will change in future
#
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 7a15629c18d0..0471044fa179 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
+obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 9795da270e3a..6e3462ed5306 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
}
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+ unsigned long *zhole_size)
+{
+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+ /*
+ * Only adjust if > 64M on current system
+ */
+ if (node || (zone_size[0] <= sz))
+ return;
+
+ zone_size[1] = zone_size[0] - sz;
+ zone_size[0] = sz;
+ zhole_size[1] = zhole_size[0];
+ zhole_size[0] = 0;
+}
+
void __init ixp4xx_pci_preinit(void)
{
unsigned long processor_id;
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f3c687cf0071..4bdc9d4526cd 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -142,6 +142,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
+ *IXP4XX_GPIO_GPISR = (1 << line);
+
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
@@ -169,7 +171,7 @@ static void ixp4xx_irq_ack(unsigned int irq)
int line = (irq < 32) ? irq2gpio[irq] : -1;
if (line >= 0)
- gpio_line_isr_clear(line);
+ *IXP4XX_GPIO_GPISR = (1 << line);
}
/*
@@ -330,11 +332,28 @@ static struct platform_device *ixp46x_devices[] __initdata = {
&ixp46x_i2c_controller
};
+unsigned long ixp4xx_exp_bus_size;
+EXPORT_SYMBOL(ixp4xx_exp_bus_size);
+
void __init ixp4xx_sys_init(void)
{
+ ixp4xx_exp_bus_size = SZ_16M;
+
if (cpu_is_ixp46x()) {
+ int region;
+
platform_add_devices(ixp46x_devices,
ARRAY_SIZE(ixp46x_devices));
+
+ for (region = 0; region < 7; region++) {
+ if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
+ ixp4xx_exp_bus_size = SZ_32M;
+ break;
+ }
+ }
}
+
+ printk("IXP4xx: Using %luMiB expansion bus window size\n",
+ ixp4xx_exp_bus_size >> 20);
}
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 60de8a94cff5..e6b7fcd923fa 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -33,9 +33,6 @@ void __init coyote_pci_preinit(void)
set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
- gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN);
- gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN);
-
ixp4xx_pci_preinit();
}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 050c92768913..13f8a7ac3ba9 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -30,8 +31,6 @@ static struct flash_platform_data coyote_flash_data = {
};
static struct resource coyote_flash_resource = {
- .start = COYOTE_FLASH_BASE,
- .end = COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -81,6 +80,11 @@ static struct platform_device *coyote_devices[] __initdata = {
static void __init coyote_init(void)
{
+ ixp4xx_sys_init();
+
+ coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
@@ -91,15 +95,12 @@ static void __init coyote_init(void)
coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
}
-
- ixp4xx_sys_init();
platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
}
#ifdef CONFIG_ARCH_ADI_COYOTE
MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
/* Maintainer: MontaVista Software, Inc. */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
@@ -117,7 +118,6 @@ MACHINE_END
#ifdef CONFIG_MACH_IXDPG425
MACHINE_START(IXDPG425, "Intel IXDPG425")
/* Maintainer: MontaVista Software, Inc. */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 29a6d02fa851..654e2eed81fb 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,6 +27,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -106,11 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
.width = 2,
};
-static struct resource gtwx5715_flash_resource = {
- .start = GTWX5715_FLASH_BASE,
- .end = GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1,
+static struct gtw5715_flash_resource = {
.flags = IORESOURCE_MEM,
-};
+}
static struct platform_device gtwx5715_flash = {
.name = "IXP4XX-Flash",
@@ -129,13 +128,20 @@ static struct platform_device *gtwx5715_devices[] __initdata = {
static void __init gtwx5715_init(void)
{
+ ixp4xx_sys_init();
+
+ if (!flash_resource)
+ printk(KERN_ERR "Could not allocate flash resource\n");
+
+ gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
+
platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
}
MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
/* Maintainer: George Joseph */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_UART2_BASE_PHYS,
.io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index f9a1d3e7d692..da415d5d7f37 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -32,11 +32,6 @@ void __init ixdp425_pci_preinit(void)
set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
- gpio_line_isr_clear(IXDP425_PCI_INTA_PIN);
- gpio_line_isr_clear(IXDP425_PCI_INTB_PIN);
- gpio_line_isr_clear(IXDP425_PCI_INTC_PIN);
- gpio_line_isr_clear(IXDP425_PCI_INTD_PIN);
-
ixp4xx_pci_preinit();
}
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 3a22d84e1047..da72383ee301 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -30,8 +31,6 @@ static struct flash_platform_data ixdp425_flash_data = {
};
static struct resource ixdp425_flash_resource = {
- .start = IXDP425_FLASH_BASE,
- .end = IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -108,17 +107,13 @@ static struct platform_device *ixdp425_devices[] __initdata = {
&ixdp425_uart
};
-
static void __init ixdp425_init(void)
{
ixp4xx_sys_init();
- /*
- * IXP465 has 32MB window
- */
- if (machine_is_ixdp465()) {
- ixdp425_flash_resource.end += IXDP425_FLASH_SIZE;
- }
+ ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ ixdp425_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
}
@@ -126,7 +121,6 @@ static void __init ixdp425_init(void)
#ifdef CONFIG_ARCH_IXDP425
MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
@@ -140,7 +134,6 @@ MACHINE_END
#ifdef CONFIG_MACH_IXDP465
MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
@@ -154,7 +147,6 @@ MACHINE_END
#ifdef CONFIG_ARCH_PRPMC1100
MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
@@ -174,7 +166,6 @@ MACHINE_END
#ifdef CONFIG_ARCH_AVILA
MACHINE_START(AVILA, "Gateworks Avila Network Platform")
/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index fe5e7660de1d..526fb6175bc3 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -32,9 +32,6 @@ void __init ixdpg425_pci_preinit(void)
set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
- gpio_line_isr_clear(6);
- gpio_line_isr_clear(7);
-
ixp4xx_pci_preinit();
}
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
new file mode 100644
index 000000000000..26b7c001ff64
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/mach-ixp4xx/nas100d-pci.c
+ *
+ * NAS 100d board-level PCI initialization
+ *
+ * based on ixdp425-pci.c:
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init nas100d_pci_preinit(void)
+{
+ set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
+ set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
+ set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
+ set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
+ set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] =
+ {
+ { IRQ_NAS100D_PCI_INTA, -1, -1 },
+ { IRQ_NAS100D_PCI_INTB, -1, -1 },
+ { IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE },
+ };
+
+ int irq = -1;
+
+ if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV &&
+ pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES)
+ irq = pci_irq_table[slot-1][pin-1];
+
+ return irq;
+}
+
+struct hw_pci __initdata nas100d_pci = {
+ .nr_controllers = 1,
+ .preinit = nas100d_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = nas100d_map_irq,
+};
+
+int __init nas100d_pci_init(void)
+{
+ if (machine_is_nas100d())
+ pci_common_init(&nas100d_pci);
+
+ return 0;
+}
+
+subsys_initcall(nas100d_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c
new file mode 100644
index 000000000000..2bec69bfa715
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nas100d-power.c
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-ixp4xx/nas100d-power.c
+ *
+ * NAS 100d Power/Reset driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nas100d-io.c
+ * Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-types.h>
+
+extern void ctrl_alt_del(void);
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* Signal init to do the ctrlaltdel action, this will bypass init if
+ * it hasn't started and do a kernel_restart.
+ */
+ ctrl_alt_del();
+
+ return IRQ_HANDLED;
+}
+
+static int __init nas100d_power_init(void)
+{
+ if (!(machine_is_nas100d()))
+ return 0;
+
+ set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
+
+ if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
+ SA_INTERRUPT, "NAS100D reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ NAS100D_RB_IRQ);
+
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void __exit nas100d_power_exit(void)
+{
+ free_irq(NAS100D_RB_IRQ, NULL);
+}
+
+module_init(nas100d_power_init);
+module_exit(nas100d_power_exit);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("NAS100D Power/Reset driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
new file mode 100644
index 000000000000..856d56f3b2ae
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp4xx/nas100d-setup.c
+ *
+ * NAS 100d board-setup
+ *
+ * based ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data nas100d_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource nas100d_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device nas100d_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev.platform_data = &nas100d_flash_data,
+ .num_resources = 1,
+ .resource = &nas100d_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
+ .sda_pin = NAS100D_SDA_PIN,
+ .scl_pin = NAS100D_SCL_PIN,
+};
+
+static struct platform_device nas100d_i2c_controller = {
+ .name = "IXP4XX-I2C",
+ .id = 0,
+ .dev.platform_data = &nas100d_i2c_gpio_pins,
+ .num_resources = 0,
+};
+
+static struct resource nas100d_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct plat_serial8250_port nas100d_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { }
+};
+
+static struct platform_device nas100d_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = nas100d_uart_data,
+ .num_resources = 2,
+ .resource = nas100d_uart_resources,
+};
+
+static struct platform_device *nas100d_devices[] __initdata = {
+ &nas100d_i2c_controller,
+ &nas100d_flash,
+ &nas100d_uart,
+};
+
+static void nas100d_power_off(void)
+{
+ /* This causes the box to drop the power and go dead. */
+
+ /* enable the pwr cntl gpio */
+ gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
+
+ /* do the deed */
+ gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+}
+
+static void __init nas100d_init(void)
+{
+ ixp4xx_sys_init();
+
+ nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ nas100d_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ pm_power_off = nas100d_power_off;
+
+ platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+}
+
+MACHINE_START(NAS100D, "Iomega NAS 100d")
+ /* Maintainer: www.nslu2-linux.org */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = nas100d_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index a575f2e0b2c8..ece860444d5b 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -28,14 +28,6 @@ void __init nslu2_pci_preinit(void)
set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
- gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
- gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
- gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-
- /* INTD is not configured as GPIO is used
- * for the power input button.
- */
-
ixp4xx_pci_preinit();
}
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
index 18fbc8c0fb30..b0ad9e901f6e 100644
--- a/arch/arm/mach-ixp4xx/nslu2-power.c
+++ b/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -54,9 +54,6 @@ static int __init nslu2_power_init(void)
set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
- gpio_line_isr_clear(NSLU2_RB_GPIO);
- gpio_line_isr_clear(NSLU2_PB_GPIO);
-
if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 289e94cb65c2..da9340a53434 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -123,7 +123,6 @@ static void __init nslu2_init(void)
MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
- .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 18:22:26 +0300