5 files changed, 25 insertions, 17 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index ae6617e3ed0b..b2d2cf4dc052 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -57,6 +57,7 @@ config SOC_SAMA5
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select USE_OF
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -64,11 +65,22 @@ choice
 
 	prompt "Core type"
 
+config ARCH_AT91X40
+	bool "ARM7 AT91X40"
+	depends on !MMU
+	select CPU_ARM7TDMI
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+	help
+	  Select this if you are using one of Atmel's AT91X40 SoC.
+
 config SOC_SAM_V4_V5
-	bool "ARM7/ARM9"
+	bool "ARM9 AT91SAM9/AT91RM9200"
 	help
-	  Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
-	  or AT91X40 SoC.
+	  Select this if you are using one of Atmel's AT91SAM9 or
+	  AT91RM9200 SoC.
 
 config SOC_SAM_V7
 	bool "Cortex A5"
@@ -177,9 +189,12 @@ config SOC_AT91SAM9N12
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
 # ----------------------------------------------------------
+endif # SOC_SAM_V4_V5
+
 
+if SOC_SAM_V4_V5 || ARCH_AT91X40
 source arch/arm/mach-at91/Kconfig.non_dt
-endif # SOC_SAM_V4_V5
+endif
 
 comment "Generic Board Type"
 
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 1f73e9b527da..44ace320d2e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -5,6 +5,7 @@ config HAVE_AT91_DATAFLASH_CARD
 
 choice
 	prompt "Atmel AT91 Processor Devices for non DT boards"
+	depends on !ARCH_AT91X40
 
 config ARCH_AT91_NONE
 	bool "None"
@@ -39,13 +40,6 @@ config ARCH_AT91SAM9G45
 	select SOC_AT91SAM9G45
 	select AT91_USE_OLD_CLK
 
-config ARCH_AT91X40
-	bool "AT91x40"
-	depends on !MMU
-	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
 endchoice
 
 config ARCH_AT91SAM9G20
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 2ae7715f1309..8b1b0a870025 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1263,12 +1263,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
 	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
 
-	if (data->flags & AT91_CF_TRUE_IDE)
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+	if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE))
 		pdev->name = "pata_at91";
-#else
-#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
-#endif
 	else
 		pdev->name = "at91_cf";
 
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index b26156bf15db..826315af6d11 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -36,6 +36,7 @@ void sam9_smc_write_mode(int id, int cs,
 {
 	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
 
 static void sam9_smc_cs_configure(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -69,6 +70,7 @@ void sam9_smc_configure(int id, int cs,
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_configure);
 
 static void sam9_smc_cs_read_mode(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -84,6 +86,7 @@ void sam9_smc_read_mode(int id, int cs,
 {
 	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
 
 static void sam9_smc_cs_read(void __iomem *base,
 					struct sam9_smc_config *config)
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7ca97b7291e..f7a07a58ebb6 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -351,7 +351,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
 		panic("Impossible to ioremap at91_matrix_base\n");
 }
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
 static struct of_device_id rstc_ids[] = {
 	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
 	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },