diff options
Diffstat (limited to 'arch/arm/kernel')
-rw-r--r-- | arch/arm/kernel/armksyms.c | 6 | ||||
-rw-r--r-- | arch/arm/kernel/entry-armv.S | 32 | ||||
-rw-r--r-- | arch/arm/kernel/entry-common.S | 63 | ||||
-rw-r--r-- | arch/arm/kernel/entry-header.S | 112 | ||||
-rw-r--r-- | arch/arm/kernel/head.S | 5 | ||||
-rw-r--r-- | arch/arm/kernel/irq.c | 1 | ||||
-rw-r--r-- | arch/arm/kernel/perf_event.c | 4 | ||||
-rw-r--r-- | arch/arm/kernel/process.c | 56 | ||||
-rw-r--r-- | arch/arm/kernel/setup.c | 6 | ||||
-rw-r--r-- | arch/arm/kernel/signal.c | 6 | ||||
-rw-r--r-- | arch/arm/kernel/smp.c | 17 | ||||
-rw-r--r-- | arch/arm/kernel/swp_emulate.c | 3 | ||||
-rw-r--r-- | arch/arm/kernel/traps.c | 1 |
13 files changed, 195 insertions, 117 deletions
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 5e5a51a99e68..f89811fb9a55 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -97,9 +97,9 @@ EXPORT_SYMBOL(mmiocpy); #ifdef CONFIG_MMU EXPORT_SYMBOL(copy_page); -EXPORT_SYMBOL(__copy_from_user); -EXPORT_SYMBOL(__copy_to_user); -EXPORT_SYMBOL(__clear_user); +EXPORT_SYMBOL(arm_copy_from_user); +EXPORT_SYMBOL(arm_copy_to_user); +EXPORT_SYMBOL(arm_clear_user); EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index cb4fb1e69778..3e1c26eb32b4 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -149,10 +149,10 @@ ENDPROC(__und_invalid) #define SPFIX(code...) #endif - .macro svc_entry, stack_hole=0, trace=1 + .macro svc_entry, stack_hole=0, trace=1, uaccess=1 UNWIND(.fnstart ) UNWIND(.save {r0 - pc} ) - sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4) + sub sp, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4) #ifdef CONFIG_THUMB2_KERNEL SPFIX( str r0, [sp] ) @ temporarily saved SPFIX( mov r0, sp ) @@ -167,7 +167,7 @@ ENDPROC(__und_invalid) ldmia r0, {r3 - r5} add r7, sp, #S_SP - 4 @ here for interlock avoidance mov r6, #-1 @ "" "" "" "" - add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4) + add r2, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4) SPFIX( addeq r2, r2, #4 ) str r3, [sp, #-4]! @ save the "real" r0 copied @ from the exception stack @@ -185,6 +185,11 @@ ENDPROC(__und_invalid) @ stmia r7, {r2 - r6} + uaccess_save r0 + .if \uaccess + uaccess_disable r0 + .endif + .if \trace #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off @@ -194,7 +199,7 @@ ENDPROC(__und_invalid) .align 5 __dabt_svc: - svc_entry + svc_entry uaccess=0 mov r2, sp dabt_helper THUMB( ldr r5, [sp, #S_PSR] ) @ potentially updated CPSR @@ -368,7 +373,7 @@ ENDPROC(__fiq_abt) #error "sizeof(struct pt_regs) must be a multiple of 8" #endif - .macro usr_entry, trace=1 + .macro usr_entry, trace=1, uaccess=1 UNWIND(.fnstart ) UNWIND(.cantunwind ) @ don't unwind the user space sub sp, sp, #S_FRAME_SIZE @@ -400,6 +405,10 @@ ENDPROC(__fiq_abt) ARM( stmdb r0, {sp, lr}^ ) THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) + .if \uaccess + uaccess_disable ip + .endif + @ Enable the alignment trap while in kernel mode ATRAP( teq r8, r7) ATRAP( mcrne p15, 0, r8, c1, c0, 0) @@ -435,7 +444,7 @@ ENDPROC(__fiq_abt) .align 5 __dabt_usr: - usr_entry + usr_entry uaccess=0 kuser_cmpxchg_check mov r2, sp dabt_helper @@ -458,7 +467,7 @@ ENDPROC(__irq_usr) .align 5 __und_usr: - usr_entry + usr_entry uaccess=0 mov r2, r4 mov r3, r5 @@ -484,6 +493,8 @@ __und_usr: 1: ldrt r0, [r4] ARM_BE8(rev r0, r0) @ little endian instruction + uaccess_disable ip + @ r0 = 32-bit ARM instruction which caused the exception @ r2 = PC value for the following instruction (:= regs->ARM_pc) @ r4 = PC value for the faulting instruction @@ -518,9 +529,10 @@ __und_usr_thumb: 2: ldrht r5, [r4] ARM_BE8(rev16 r5, r5) @ little endian instruction cmp r5, #0xe800 @ 32bit instruction if xx != 0 - blo __und_usr_fault_16 @ 16bit undefined instruction + blo __und_usr_fault_16_pan @ 16bit undefined instruction 3: ldrht r0, [r2] ARM_BE8(rev16 r0, r0) @ little endian instruction + uaccess_disable ip add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 str r2, [sp, #S_PC] @ it's a 2x16bit instr, update orr r0, r0, r5, lsl #16 @@ -715,6 +727,8 @@ ENDPROC(no_fp) __und_usr_fault_32: mov r1, #4 b 1f +__und_usr_fault_16_pan: + uaccess_disable ip __und_usr_fault_16: mov r1, #2 1: mov r0, sp @@ -770,6 +784,8 @@ ENTRY(__switch_to) ldr r4, [r2, #TI_TP_VALUE] ldr r5, [r2, #TI_TP_VALUE + 4] #ifdef CONFIG_CPU_USE_DOMAINS + mrc p15, 0, r6, c3, c0, 0 @ Get domain register + str r6, [r1, #TI_CPU_DOMAIN] @ Save old domain register ldr r6, [r2, #TI_CPU_DOMAIN] #endif switch_tls r1, r4, r5, r3, r7 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index b48dd4f37f80..30a7228eaceb 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -24,35 +24,55 @@ .align 5 +#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING)) /* - * This is the fast syscall return path. We do as little as - * possible here, and this includes saving r0 back into the SVC - * stack. + * This is the fast syscall return path. We do as little as possible here, + * such as avoiding writing r0 to the stack. We only use this path if we + * have tracing and context tracking disabled - the overheads from those + * features make this path too inefficient. */ ret_fast_syscall: UNWIND(.fnstart ) UNWIND(.cantunwind ) - disable_irq @ disable interrupts + disable_irq_notrace @ disable interrupts ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing - tst r1, #_TIF_SYSCALL_WORK - bne __sys_trace_return - tst r1, #_TIF_WORK_MASK + tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK bne fast_work_pending - asm_trace_hardirqs_on /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr - ct_user_enter restore_user_regs fast = 1, offset = S_OFF UNWIND(.fnend ) +ENDPROC(ret_fast_syscall) -/* - * Ok, we need to do extra processing, enter the slow path. - */ + /* Ok, we need to do extra processing, enter the slow path. */ fast_work_pending: str r0, [sp, #S_R0+S_OFF]! @ returned r0 -work_pending: + /* fall through to work_pending */ +#else +/* + * The "replacement" ret_fast_syscall for when tracing or context tracking + * is enabled. As we will need to call out to some C functions, we save + * r0 first to avoid needing to save registers around each C function call. + */ +ret_fast_syscall: + UNWIND(.fnstart ) + UNWIND(.cantunwind ) + str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 + disable_irq_notrace @ disable interrupts + ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing + tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK + beq no_work_pending + UNWIND(.fnend ) +ENDPROC(ret_fast_syscall) + + /* Slower path - fall through to work_pending */ +#endif + + tst r1, #_TIF_SYSCALL_WORK + bne __sys_trace_return_nosave +slow_work_pending: mov r0, sp @ 'regs' mov r2, why @ 'syscall' bl do_work_pending @@ -65,16 +85,19 @@ ENDPROC(ret_fast_syscall) /* * "slow" syscall return path. "why" tells us if this was a real syscall. + * IRQs may be enabled here, so always disable them. Note that we use the + * "notrace" version to avoid calling into the tracing code unnecessarily. + * do_work_pending() will update this state if necessary. */ ENTRY(ret_to_user) ret_slow_syscall: - disable_irq @ disable interrupts + disable_irq_notrace @ disable interrupts ENTRY(ret_to_user_from_irq) ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK - bne work_pending + bne slow_work_pending no_work_pending: - asm_trace_hardirqs_on + asm_trace_hardirqs_on save = 0 /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr @@ -174,6 +197,8 @@ ENTRY(vector_swi) USER( ldr scno, [lr, #-4] ) @ get SWI instruction #endif + uaccess_disable tbl + adr tbl, sys_call_table @ load syscall table pointer #if defined(CONFIG_OABI_COMPAT) @@ -252,6 +277,12 @@ __sys_trace_return: bl syscall_trace_exit b ret_slow_syscall +__sys_trace_return_nosave: + enable_irq_notrace + mov r0, sp + bl syscall_trace_exit + b ret_slow_syscall + .align 5 #ifdef CONFIG_ALIGNMENT_TRAP .type __cr_alignment, #object diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 1a0045abead7..0d22ad206d52 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -196,7 +196,7 @@ msr cpsr_c, \rtemp @ switch back to the SVC mode .endm -#ifndef CONFIG_THUMB2_KERNEL + .macro svc_exit, rpsr, irq = 0 .if \irq != 0 @ IRQs already off @@ -215,6 +215,10 @@ blne trace_hardirqs_off #endif .endif + uaccess_restore + +#ifndef CONFIG_THUMB2_KERNEL + @ ARM mode SVC restore msr spsr_cxsf, \rpsr #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) @ We must avoid clrex due to Cortex-A15 erratum #830321 @@ -222,6 +226,20 @@ strex r1, r2, [r0] @ clear the exclusive monitor #endif ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr +#else + @ Thumb mode SVC restore + ldr lr, [sp, #S_SP] @ top of the stack + ldrd r0, r1, [sp, #S_LR] @ calling lr and pc + + @ We must avoid clrex due to Cortex-A15 erratum #830321 + strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor + + stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context + ldmia sp, {r0 - r12} + mov sp, lr + ldr lr, [sp], #4 + rfeia sp! +#endif .endm @ @@ -241,6 +259,9 @@ @ on the stack remains correct). @ .macro svc_exit_via_fiq + uaccess_restore +#ifndef CONFIG_THUMB2_KERNEL + @ ARM mode restore mov r0, sp ldmib r0, {r1 - r14} @ abort is deadly from here onward (it will @ clobber state restored below) @@ -250,9 +271,27 @@ msr spsr_cxsf, r9 ldr r0, [r0, #S_R0] ldmia r8, {pc}^ +#else + @ Thumb mode restore + add r0, sp, #S_R2 + ldr lr, [sp, #S_LR] + ldr sp, [sp, #S_SP] @ abort is deadly from here onward (it will + @ clobber state restored below) + ldmia r0, {r2 - r12} + mov r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT + msr cpsr_c, r1 + sub r0, #S_R2 + add r8, r0, #S_PC + ldmia r0, {r0 - r1} + rfeia r8 +#endif .endm + .macro restore_user_regs, fast = 0, offset = 0 + uaccess_enable r1, isb=0 +#ifndef CONFIG_THUMB2_KERNEL + @ ARM mode restore mov r2, sp ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr ldr lr, [r2, #\offset + S_PC]! @ get pc @@ -270,72 +309,16 @@ @ after ldm {}^ add sp, sp, #\offset + S_FRAME_SIZE movs pc, lr @ return & move spsr_svc into cpsr - .endm - -#else /* CONFIG_THUMB2_KERNEL */ - .macro svc_exit, rpsr, irq = 0 - .if \irq != 0 - @ IRQs already off -#ifdef CONFIG_TRACE_IRQFLAGS - @ The parent context IRQs must have been enabled to get here in - @ the first place, so there's no point checking the PSR I bit. - bl trace_hardirqs_on -#endif - .else - @ IRQs off again before pulling preserved data off the stack - disable_irq_notrace -#ifdef CONFIG_TRACE_IRQFLAGS - tst \rpsr, #PSR_I_BIT - bleq trace_hardirqs_on - tst \rpsr, #PSR_I_BIT - blne trace_hardirqs_off -#endif - .endif - ldr lr, [sp, #S_SP] @ top of the stack - ldrd r0, r1, [sp, #S_LR] @ calling lr and pc - - @ We must avoid clrex due to Cortex-A15 erratum #830321 - strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor - - stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context - ldmia sp, {r0 - r12} - mov sp, lr - ldr lr, [sp], #4 - rfeia sp! - .endm - - @ - @ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit - @ - @ For full details see non-Thumb implementation above. - @ - .macro svc_exit_via_fiq - add r0, sp, #S_R2 - ldr lr, [sp, #S_LR] - ldr sp, [sp, #S_SP] @ abort is deadly from here onward (it will - @ clobber state restored below) - ldmia r0, {r2 - r12} - mov r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT - msr cpsr_c, r1 - sub r0, #S_R2 - add r8, r0, #S_PC - ldmia r0, {r0 - r1} - rfeia r8 - .endm - -#ifdef CONFIG_CPU_V7M - /* - * Note we don't need to do clrex here as clearing the local monitor is - * part of each exception entry and exit sequence. - */ - .macro restore_user_regs, fast = 0, offset = 0 +#elif defined(CONFIG_CPU_V7M) + @ V7M restore. + @ Note that we don't need to do clrex here as clearing the local + @ monitor is part of the exception entry and exit sequence. .if \offset add sp, #\offset .endif v7m_exception_slow_exit ret_r0 = \fast - .endm -#else /* ifdef CONFIG_CPU_V7M */ - .macro restore_user_regs, fast = 0, offset = 0 +#else + @ Thumb mode restore mov r2, sp load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr @@ -353,9 +336,8 @@ .endif add sp, sp, #S_FRAME_SIZE - S_SP movs pc, lr @ return & move spsr_svc into cpsr - .endm -#endif /* ifdef CONFIG_CPU_V7M / else */ #endif /* !CONFIG_THUMB2_KERNEL */ + .endm /* * Context tracking subsystem. Used to instrument transitions diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 29e2991465cb..04286fd9e09c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -464,10 +464,7 @@ __enable_mmu: #ifdef CONFIG_ARM_LPAE mcrr p15, 0, r4, r5, c2 @ load TTBR0 #else - mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_IO, DOMAIN_CLIENT)) + mov r5, #DACR_INIT mcr p15, 0, r5, c3, c0, 0 @ load domain access register mcr p15, 0, r4, c2, c0, 0 @ load page table pointer #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 350f188c92d2..b96c8ed1723a 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -39,6 +39,7 @@ #include <linux/export.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/outercache.h> #include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 54272e0be713..7d5379c1c443 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -795,8 +795,10 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) /* Don't bother with PPIs; they're already affine */ irq = platform_get_irq(pdev, 0); - if (irq >= 0 && irq_is_percpu(irq)) + if (irq >= 0 && irq_is_percpu(irq)) { + cpumask_setall(&pmu->supported_cpus); return 0; + } irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); if (!irqs) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f192a2a41719..a3089bacb8d8 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -91,13 +91,6 @@ void arch_cpu_idle_exit(void) ledtrig_cpu(CPU_LED_IDLE_END); } -#ifdef CONFIG_HOTPLUG_CPU -void arch_cpu_idle_dead(void) -{ - cpu_die(); -} -#endif - void __show_regs(struct pt_regs *regs) { unsigned long flags; @@ -129,12 +122,36 @@ void __show_regs(struct pt_regs *regs) buf[4] = '\0'; #ifndef CONFIG_CPU_V7M - printk("Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s\n", - buf, interrupts_enabled(regs) ? "n" : "ff", - fast_interrupts_enabled(regs) ? "n" : "ff", - processor_modes[processor_mode(regs)], - isa_modes[isa_mode(regs)], - get_fs() == get_ds() ? "kernel" : "user"); + { + unsigned int domain = get_domain(); + const char *segment; + +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + /* + * Get the domain register for the parent context. In user + * mode, we don't save the DACR, so lets use what it should + * be. For other modes, we place it after the pt_regs struct. + */ + if (user_mode(regs)) + domain = DACR_UACCESS_ENABLE; + else + domain = *(unsigned int *)(regs + 1); +#endif + + if ((domain & domain_mask(DOMAIN_USER)) == + domain_val(DOMAIN_USER, DOMAIN_NOACCESS)) + segment = "none"; + else if (get_fs() == get_ds()) + segment = "kernel"; + else + segment = "user"; + + printk("Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s\n", + buf, interrupts_enabled(regs) ? "n" : "ff", + fast_interrupts_enabled(regs) ? "n" : "ff", + processor_modes[processor_mode(regs)], + isa_modes[isa_mode(regs)], segment); + } #else printk("xPSR: %08lx\n", regs->ARM_cpsr); #endif @@ -146,10 +163,9 @@ void __show_regs(struct pt_regs *regs) buf[0] = '\0'; #ifdef CONFIG_CPU_CP15_MMU { - unsigned int transbase, dac; + unsigned int transbase, dac = get_domain(); asm("mrc p15, 0, %0, c2, c0\n\t" - "mrc p15, 0, %1, c3, c0\n" - : "=r" (transbase), "=r" (dac)); + : "=r" (transbase)); snprintf(buf, sizeof(buf), " Table: %08x DAC: %08x", transbase, dac); } @@ -210,6 +226,14 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save)); + /* + * Copy the initial value of the domain access control register + * from the current thread: thread->addr_limit will have been + * copied from the current thread via setup_thread_stack() in + * kernel/fork.c + */ + thread->cpu_domain = get_domain(); + if (likely(!(p->flags & PF_KTHREAD))) { *childregs = *current_pt_regs(); childregs->ARM_r0 = 0; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 36c18b73c1f4..e2ecee6b70ca 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,7 @@ #include <asm/cpu.h> #include <asm/cputype.h> #include <asm/elf.h> +#include <asm/fixmap.h> #include <asm/procinfo.h> #include <asm/psci.h> #include <asm/sections.h> @@ -954,6 +955,9 @@ void __init setup_arch(char **cmdline_p) strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; + if (IS_ENABLED(CONFIG_FIX_EARLYCON_MEM)) + early_fixmap_init(); + parse_early_param(); #ifdef CONFIG_MMU @@ -1015,7 +1019,7 @@ static int __init topology_init(void) for_each_possible_cpu(cpu) { struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu); - cpuinfo->cpu.hotpluggable = 1; + cpuinfo->cpu.hotpluggable = platform_can_hotplug_cpu(cpu); register_cpu(&cpuinfo->cpu, cpu); } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 423663e23791..b6cda06b455f 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -562,6 +562,12 @@ static int do_signal(struct pt_regs *regs, int syscall) asmlinkage int do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) { + /* + * The assembly code enters us with IRQs off, but it hasn't + * informed the tracing code of that for efficiency reasons. + * Update the trace code with the current status. + */ + trace_hardirqs_off(); do { if (likely(thread_flags & _TIF_NEED_RESCHED)) { schedule(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 3d6b7821cff8..ba0063c539c3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -175,13 +175,26 @@ static int platform_cpu_disable(unsigned int cpu) if (smp_ops.cpu_disable) return smp_ops.cpu_disable(cpu); + return 0; +} + +int platform_can_hotplug_cpu(unsigned int cpu) +{ + /* cpu_die must be specified to support hotplug */ + if (!smp_ops.cpu_die) + return 0; + + if (smp_ops.cpu_can_disable) + return smp_ops.cpu_can_disable(cpu); + /* * By default, allow disabling all CPUs except the first one, * since this is special on a lot of platforms, e.g. because * of clock tick interrupts. */ - return cpu == 0 ? -EPERM : 0; + return cpu != 0; } + /* * __cpu_disable runs on the processor to be shutdown. */ @@ -253,7 +266,7 @@ void __cpu_die(unsigned int cpu) * of the other hotplug-cpu capable cores, so presumably coming * out of idle fixes this. */ -void __ref cpu_die(void) +void arch_cpu_idle_dead(void) { unsigned int cpu = smp_processor_id(); diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 1361756782c7..5b26e7efa9ea 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -141,11 +141,14 @@ static int emulate_swpX(unsigned int address, unsigned int *data, while (1) { unsigned long temp; + unsigned int __ua_flags; + __ua_flags = uaccess_save_and_enable(); if (type == TYPE_SWPB) __user_swpb_asm(*data, address, res, temp); else __user_swp_asm(*data, address, res, temp); + uaccess_restore(__ua_flags); if (likely(res != -EAGAIN) || signal_pending(current)) break; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index d358226236f2..969f9d9e665f 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -870,7 +870,6 @@ void __init early_trap_init(void *vectors_base) kuser_init(vectors_base); flush_icache_range(vectors, vectors + PAGE_SIZE * 2); - modify_domain(DOMAIN_USER, DOMAIN_CLIENT); #else /* ifndef CONFIG_CPU_V7M */ /* * on V7-M there is no need to copy the vector table to a dedicated |