diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--[-rwxr-xr-x] | arch/arm/boot/dts/am335x-osd3358-sm-red.dts | 0 | ||||
-rw-r--r-- | arch/arm/boot/dts/am4372.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx23-evk.dts | 90 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx28-evk.dts | 183 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx7d.dtsi | 12 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap4-droid4-xt894.dts | 20 | ||||
-rw-r--r-- | arch/arm/boot/dts/sama5d3_emac.dtsi | 2 |
7 files changed, 146 insertions, 162 deletions
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 4d969013f99a..4d969013f99a 100755..100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index f0cbd86312dc..d4b7c59eec68 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -469,6 +469,7 @@ ti,hwmods = "rtc"; clocks = <&clk_32768_ck>; clock-names = "int-clk"; + system-power-controller; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 9fb47724b9c1..ad2ae25b7b4d 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -13,6 +13,43 @@ reg = <0x40000000 0x08000000>; }; + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 0>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { @@ -52,31 +89,11 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hback-porch = <15>; - hfront-porch = <8>; - vback-porch = <12>; - vfront-porch = <4>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -118,32 +135,7 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_vddio_sd0: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vddio-sd0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 29 0>; - }; - - reg_lcd_3v3: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "lcd-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 18 0>; - enable-active-high; - }; - }; - - backlight { + backlight_display: backlight { compatible = "pwm-backlight"; pwms = <&pwm 2 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 6b0ae667640f..93ab5bdfe068 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -13,6 +13,87 @@ reg = <0x40000000 0x08000000>; }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: regulator-fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; + + reg_can_3v3: regulator-can-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 13 0>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { @@ -116,31 +197,11 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -269,80 +330,6 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_vddio_sd0: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vddio-sd0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 28 0>; - }; - - reg_fec_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "fec-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 15 0>; - }; - - reg_usb0_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 9 0>; - enable-active-high; - }; - - reg_usb1_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 8 0>; - enable-active-high; - }; - - reg_lcd_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "lcd-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 0>; - enable-active-high; - }; - - reg_can_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "can-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 13 0>; - enable-active-high; - }; - - }; - sound { compatible = "fsl,imx28-evk-sgtl5000", "fsl,mxs-audio-sgtl5000"; @@ -363,7 +350,7 @@ }; }; - backlight { + backlight_display: backlight { compatible = "pwm-backlight"; pwms = <&pwm 2 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7cbc2ffa4b3a..7234e8330a57 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -126,10 +126,14 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <&clks IMX7D_PCIE_PHY_ROOT_CLK>; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 12d6822f0057..04758a2a87f0 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -354,7 +354,7 @@ &mmc2 { vmmc-supply = <&vsdio>; bus-width = <8>; - non-removable; + ti,non-removable; }; &mmc3 { @@ -621,15 +621,6 @@ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; -}; - -&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { - /* gpio_wk0 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; vibrator_direction_pin: pinmux_vibrator_direction_pin { pinctrl-single,pins = < @@ -644,6 +635,15 @@ }; }; +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + /* * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for * uart1 wakeirq. diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 7cb235ef0fb6..6e9e1c2f9def 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at91sam9260-macb", "cdns,macb"; + compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; |