diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/spear1310-evb.dts | 292 | ||||
-rw-r--r-- | arch/arm/boot/dts/spear1310.dtsi | 184 | ||||
-rw-r--r-- | arch/arm/boot/dts/spear1340-evb.dts | 308 | ||||
-rw-r--r-- | arch/arm/boot/dts/spear1340.dtsi | 56 | ||||
-rw-r--r-- | arch/arm/boot/dts/spear13xx.dtsi | 262 |
5 files changed, 1102 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts new file mode 100644 index 000000000000..8314e4171884 --- /dev/null +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -0,0 +1,292 @@ +/* + * DTS file for SPEAr1310 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear1310.dtsi" + +/ { + model = "ST SPEAr1310 Evaluation Board"; + compatible = "st,spear1310-evb", "st,spear1310"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux@e0700000 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0-pmx { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + i2s1 { + st,pins = "i2s1_grp"; + st,function = "i2s1"; + }; + gpio { + st,pins = "arm_gpio_grp"; + st,function = "arm_gpio"; + }; + eth { + st,pins = "gmii_grp"; + st,function = "gmii"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + kbd { + st,pins = "keyboard_6x6_grp"; + st,function = "keyboard"; + }; + sdhci { + st,pins = "sdhci_grp"; + st,function = "sdhci"; + }; + smi-pmx { + st,pins = "smi_2_chips_grp"; + st,function = "smi"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + rs485 { + st,pins = "rs485_0_1_tdm_0_1_grp"; + st,function = "rs485_0_1_tdm_0_1"; + }; + i2c1_2 { + st,pins = "i2c_1_2_grp"; + st,function = "i2c_1_2"; + }; + pci { + st,pins = "pcie0_grp","pcie1_grp", + "pcie2_grp"; + st,function = "pci"; + }; + smii { + st,pins = "smii_0_1_2_grp"; + st,function = "smii_0_1_2"; + }; + nand { + st,pins = "nand_8bit_grp", + "nand_16bit_grp"; + st,function = "nand"; + }; + }; + }; + + ahci@b1000000 { + status = "okay"; + }; + + cf@b2800000 { + status = "okay"; + }; + + dma@ea800000 { + status = "okay"; + }; + + dma@eb000000 { + status = "okay"; + }; + + fsmc: flash@b0000000 { + status = "okay"; + }; + + gmac0: eth@e2000000 { + status = "okay"; + }; + + sdhci@b3000000 { + status = "okay"; + }; + + smi: flash@ea000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@e6000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe6000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; + }; + + spi0: spi@e0100000 { + status = "okay"; + }; + + ehci@e4800000 { + status = "okay"; + }; + + ehci@e5800000 { + status = "okay"; + }; + + ohci@e4000000 { + status = "okay"; + }; + + ohci@e5000000 { + status = "okay"; + }; + + apb { + adc@e0080000 { + status = "okay"; + }; + + gpio0: gpio@e0600000 { + status = "okay"; + }; + + gpio1: gpio@e0680000 { + status = "okay"; + }; + + i2c0: i2c@e0280000 { + status = "okay"; + }; + + i2c1: i2c@5cd00000 { + status = "okay"; + }; + + kbd@e0300000 { + linux,keymap = < 0x00000001 + 0x00010002 + 0x00020003 + 0x00030004 + 0x00040005 + 0x00050006 + 0x00060007 + 0x00070008 + 0x00080009 + 0x0100000a + 0x0101000c + 0x0102000d + 0x0103000e + 0x0104000f + 0x01050010 + 0x01060011 + 0x01070012 + 0x01080013 + 0x02000014 + 0x02010015 + 0x02020016 + 0x02030017 + 0x02040018 + 0x02050019 + 0x0206001a + 0x0207001b + 0x0208001c + 0x0300001d + 0x0301001e + 0x0302001f + 0x03030020 + 0x03040021 + 0x03050022 + 0x03060023 + 0x03070024 + 0x03080025 + 0x04000026 + 0x04010027 + 0x04020028 + 0x04030029 + 0x0404002a + 0x0405002b + 0x0406002c + 0x0407002d + 0x0408002e + 0x0500002f + 0x05010030 + 0x05020031 + 0x05030032 + 0x05040033 + 0x05050034 + 0x05060035 + 0x05070036 + 0x05080037 + 0x06000038 + 0x06010039 + 0x0602003a + 0x0603003b + 0x0604003c + 0x0605003d + 0x0606003e + 0x0607003f + 0x06080040 + 0x07000041 + 0x07010042 + 0x07020043 + 0x07030044 + 0x07040045 + 0x07050046 + 0x07060047 + 0x07070048 + 0x07080049 + 0x0800004a + 0x0801004b + 0x0802004c + 0x0803004d + 0x0804004e + 0x0805004f + 0x08060050 + 0x08070051 + 0x08080052 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@e0580000 { + status = "okay"; + }; + + serial@e0000000 { + status = "okay"; + }; + + wdt@ec800620 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi new file mode 100644 index 000000000000..9e61da404d57 --- /dev/null +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -0,0 +1,184 @@ +/* + * DTS file for all SPEAr1310 SoCs + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear13xx.dtsi" + +/ { + compatible = "st,spear1310"; + + ahb { + ahci@b1000000 { + compatible = "snps,spear-ahci"; + reg = <0xb1000000 0x10000>; + interrupts = <0 68 0x4>; + status = "disabled"; + }; + + ahci@b1800000 { + compatible = "snps,spear-ahci"; + reg = <0xb1800000 0x10000>; + interrupts = <0 69 0x4>; + status = "disabled"; + }; + + ahci@b4000000 { + compatible = "snps,spear-ahci"; + reg = <0xb4000000 0x10000>; + interrupts = <0 70 0x4>; + status = "disabled"; + }; + + gmac1: eth@5c400000 { + compatible = "st,spear600-gmac"; + reg = <0x5c400000 0x8000>; + interrupts = <0 95 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac2: eth@5c500000 { + compatible = "st,spear600-gmac"; + reg = <0x5c500000 0x8000>; + interrupts = <0 96 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac3: eth@5c600000 { + compatible = "st,spear600-gmac"; + reg = <0x5c600000 0x8000>; + interrupts = <0 97 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac4: eth@5c700000 { + compatible = "st,spear600-gmac"; + reg = <0x5c700000 0x8000>; + interrupts = <0 98 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + spi1: spi@5d400000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x5d400000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + + apb { + i2c1: i2c@5cd00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5cd00000 0x1000>; + interrupts = <0 87 0x4>; + status = "disabled"; + }; + + i2c2: i2c@5ce00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5ce00000 0x1000>; + interrupts = <0 88 0x4>; + status = "disabled"; + }; + + i2c3: i2c@5cf00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5cf00000 0x1000>; + interrupts = <0 89 0x4>; + status = "disabled"; + }; + + i2c4: i2c@5d000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d000000 0x1000>; + interrupts = <0 90 0x4>; + status = "disabled"; + }; + + i2c5: i2c@5d100000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d100000 0x1000>; + interrupts = <0 91 0x4>; + status = "disabled"; + }; + + i2c6: i2c@5d200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d200000 0x1000>; + interrupts = <0 92 0x4>; + status = "disabled"; + }; + + i2c7: i2c@5d300000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d300000 0x1000>; + interrupts = <0 93 0x4>; + status = "disabled"; + }; + + serial@5c800000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5c800000 0x1000>; + interrupts = <0 82 0x4>; + status = "disabled"; + }; + + serial@5c900000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5c900000 0x1000>; + interrupts = <0 83 0x4>; + status = "disabled"; + }; + + serial@5ca00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5ca00000 0x1000>; + interrupts = <0 84 0x4>; + status = "disabled"; + }; + + serial@5cb00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5cb00000 0x1000>; + interrupts = <0 85 0x4>; + status = "disabled"; + }; + + serial@5cc00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5cc00000 0x1000>; + interrupts = <0 86 0x4>; + status = "disabled"; + }; + + thermal@e07008c4 { + st,thermal-flags = <0x7000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts new file mode 100644 index 000000000000..0d8472e5ab9f --- /dev/null +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -0,0 +1,308 @@ +/* + * DTS file for SPEAr1340 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear1340.dtsi" + +/ { + model = "ST SPEAr1340 Evaluation Board"; + compatible = "st,spear1340-evb", "st,spear1340"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux@e0700000 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pads_as_gpio { + st,pins = "pads_as_gpio_grp"; + st,function = "pads_as_gpio"; + }; + fsmc { + st,pins = "fsmc_8bit_grp"; + st,function = "fsmc"; + }; + kbd { + st,pins = "keyboard_row_col_grp", + "keyboard_col5_grp"; + st,function = "keyboard"; + }; + uart0 { + st,pins = "uart0_grp", "uart0_enh_grp"; + st,function = "uart0"; + }; + i2c0-pmx { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + i2c1-pmx { + st,pins = "i2c1_grp"; + st,function = "i2c1"; + }; + spdif-in { + st,pins = "spdif_in_grp"; + st,function = "spdif_in"; + }; + spdif-out { + st,pins = "spdif_out_grp"; + st,function = "spdif_out"; + }; + ssp0 { + st,pins = "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs3_grp"; + st,function = "ssp0"; + }; + pwm { + st,pins = "pwm2_grp", "pwm3_grp"; + st,function = "pwm"; + }; + smi-pmx { + st,pins = "smi_grp"; + st,function = "smi"; + }; + i2s { + st,pins = "i2s_in_grp", "i2s_out_grp"; + st,function = "i2s"; + }; + gmac { + st,pins = "gmii_grp", "rgmii_grp"; + st,function = "gmac"; + }; + cam3 { + st,pins = "cam3_grp"; + st,function = "cam3"; + }; + cec0 { + st,pins = "cec0_grp"; + st,function = "cec0"; + }; + cec1 { + st,pins = "cec1_grp"; + st,function = "cec1"; + }; + sdhci { + st,pins = "sdhci_grp"; + st,function = "sdhci"; + }; + clcd { + st,pins = "clcd_grp"; + st,function = "clcd"; + }; + sata { + st,pins = "sata_grp"; + st,function = "sata"; + }; + }; + }; + + dma@ea800000 { + status = "okay"; + }; + + dma@eb000000 { + status = "okay"; + }; + + fsmc: flash@b0000000 { + status = "okay"; + }; + + gmac0: eth@e2000000 { + status = "okay"; + }; + + sdhci@b3000000 { + status = "okay"; + }; + + smi: flash@ea000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@e6000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe6000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; + }; + + spi0: spi@e0100000 { + status = "okay"; + }; + + ehci@e4800000 { + status = "okay"; + }; + + ehci@e5800000 { + status = "okay"; + }; + + ohci@e4000000 { + status = "okay"; + }; + + ohci@e5000000 { + status = "okay"; + }; + + apb { + adc@e0080000 { + status = "okay"; + }; + + gpio0: gpio@e0600000 { + status = "okay"; + }; + + gpio1: gpio@e0680000 { + status = "okay"; + }; + + i2c0: i2c@e0280000 { + status = "okay"; + }; + + i2c1: i2c@b4000000 { + status = "okay"; + }; + + kbd@e0300000 { + linux,keymap = < 0x00000001 + 0x00010002 + 0x00020003 + 0x00030004 + 0x00040005 + 0x00050006 + 0x00060007 + 0x00070008 + 0x00080009 + 0x0100000a + 0x0101000c + 0x0102000d + 0x0103000e + 0x0104000f + 0x01050010 + 0x01060011 + 0x01070012 + 0x01080013 + 0x02000014 + 0x02010015 + 0x02020016 + 0x02030017 + 0x02040018 + 0x02050019 + 0x0206001a + 0x0207001b + 0x0208001c + 0x0300001d + 0x0301001e + 0x0302001f + 0x03030020 + 0x03040021 + 0x03050022 + 0x03060023 + 0x03070024 + 0x03080025 + 0x04000026 + 0x04010027 + 0x04020028 + 0x04030029 + 0x0404002a + 0x0405002b + 0x0406002c + 0x0407002d + 0x0408002e + 0x0500002f + 0x05010030 + 0x05020031 + 0x05030032 + 0x05040033 + 0x05050034 + 0x05060035 + 0x05070036 + 0x05080037 + 0x06000038 + 0x06010039 + 0x0602003a + 0x0603003b + 0x0604003c + 0x0605003d + 0x0606003e + 0x0607003f + 0x06080040 + 0x07000041 + 0x07010042 + 0x07020043 + 0x07030044 + 0x07040045 + 0x07050046 + 0x07060047 + 0x07070048 + 0x07080049 + 0x0800004a + 0x0801004b + 0x0802004c + 0x0803004d + 0x0804004e + 0x0805004f + 0x08060050 + 0x08070051 + 0x08080052 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@e0580000 { + status = "okay"; + }; + + serial@e0000000 { + status = "okay"; + }; + + serial@b4100000 { + status = "okay"; + }; + + wdt@ec800620 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi new file mode 100644 index 000000000000..a26fc47a55e8 --- /dev/null +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -0,0 +1,56 @@ +/* + * DTS file for all SPEAr1340 SoCs + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear13xx.dtsi" + +/ { + compatible = "st,spear1340"; + + ahb { + ahci@b1000000 { + compatible = "snps,spear-ahci"; + reg = <0xb1000000 0x10000>; + interrupts = <0 72 0x4>; + status = "disabled"; + }; + + spi1: spi@5d400000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x5d400000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + + apb { + i2c1: i2c@b4000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xb4000000 0x1000>; + interrupts = <0 104 0x4>; + status = "disabled"; + }; + + serial@b4100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb4100000 0x1000>; + interrupts = <0 105 0x4>; + status = "disabled"; + }; + + thermal@e07008c4 { + st,thermal-flags = <0x2a00>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi new file mode 100644 index 000000000000..1f8e1e1481df --- /dev/null +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -0,0 +1,262 @@ +/* + * DTS file for all SPEAr13xx SoCs + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + gic: interrupt-controller@ec801000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0xec801000 0x1000 >, + < 0xec800100 0x0100 >; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 8 0x04 + 0 9 0x04>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xed000000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyAMA0,115200"; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x50000000 0x50000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xe0000000 0xe0000000 0x10000000>; + + sdhci@b3000000 { + compatible = "st,sdhci-spear"; + reg = <0xb3000000 0x100>; + interrupts = <0 28 0x4>; + status = "disabled"; + }; + + cf@b2800000 { + compatible = "arasan,cf-spear1340"; + reg = <0xb2800000 0x100>; + interrupts = <0 29 0x4>; + status = "disabled"; + }; + + dma@ea800000 { + compatible = "snps,dma-spear1340"; + reg = <0xea800000 0x1000>; + interrupts = <0 19 0x4>; + status = "disabled"; + }; + + dma@eb000000 { + compatible = "snps,dma-spear1340"; + reg = <0xeb000000 0x1000>; + interrupts = <0 59 0x4>; + status = "disabled"; + }; + + fsmc: flash@b0000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000000 0x1000 /* FSMC Register */ + 0xb0800000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + interrupts = <0 20 0x4 + 0 21 0x4 + 0 22 0x4 + 0 23 0x4>; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + gmac0: eth@e2000000 { + compatible = "st,spear600-gmac"; + reg = <0xe2000000 0x8000>; + interrupts = <0 23 0x4 + 0 24 0x4>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + smi: flash@ea000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xea000000 0x1000>; + interrupts = <0 30 0x4>; + status = "disabled"; + }; + + spi0: spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + interrupts = <0 31 0x4>; + status = "disabled"; + }; + + ehci@e4800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe4800000 0x1000>; + interrupts = <0 64 0x4>; + status = "disabled"; + }; + + ehci@e5800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe5800000 0x1000>; + interrupts = <0 66 0x4>; + status = "disabled"; + }; + + ohci@e4000000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe4000000 0x1000>; + interrupts = <0 65 0x4>; + status = "disabled"; + }; + + ohci@e5000000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe5000000 0x1000>; + interrupts = <0 67 0x4>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x50000000 0x50000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xe0000000 0xe0000000 0x10000000>; + + gpio0: gpio@e0600000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xe0600000 0x1000>; + interrupts = <0 24 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@e0680000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xe0680000 0x1000>; + interrupts = <0 25 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + kbd@e0300000 { + compatible = "st,spear300-kbd"; + reg = <0xe0300000 0x1000>; + status = "disabled"; + }; + + i2c0: i2c@e0280000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xe0280000 0x1000>; + interrupts = <0 41 0x4>; + status = "disabled"; + }; + + rtc@e0580000 { + compatible = "st,spear-rtc"; + reg = <0xe0580000 0x1000>; + interrupts = <0 36 0x4>; + status = "disabled"; + }; + + serial@e0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xe0000000 0x1000>; + interrupts = <0 36 0x4>; + status = "disabled"; + }; + + adc@e0080000 { + compatible = "st,spear600-adc"; + reg = <0xe0080000 0x1000>; + interrupts = <0 44 0x4>; + status = "disabled"; + }; + + timer@e0380000 { + compatible = "st,spear-timer"; + reg = <0xe0380000 0x400>; + interrupts = <0 37 0x4>; + }; + + timer@ec800600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xec800600 0x20>; + interrupts = <1 13 0x301>; + }; + + wdt@ec800620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xec800620 0x20>; + status = "disabled"; + }; + + thermal@e07008c4 { + compatible = "st,thermal-spear1340"; + reg = <0xe07008c4 0x4>; + }; + }; + }; +}; |