diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp135f-dk.dts')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp135f-dk.dts | 370 |
1 files changed, 0 insertions, 370 deletions
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts deleted file mode 100644 index f0900ca672b5..000000000000 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ /dev/null @@ -1,370 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2021 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include "stm32mp135.dtsi" -#include "stm32mp13xf.dtsi" -#include "stm32mp13-pinctrl.dtsi" - -/ { - model = "STMicroelectronics STM32MP135F-DK Discovery Board"; - compatible = "st,stm32mp135f-dk", "st,stm32mp135"; - - aliases { - serial0 = &uart4; - serial1 = &usart1; - serial2 = &uart8; - serial3 = &usart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - optee@dd000000 { - reg = <0xdd000000 0x3000000>; - no-map; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - button-user { - label = "User-PA13"; - linux,code = <BTN_1>; - gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_BLUE>; - gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - v3v3_sw: v3v3-sw { - compatible = "regulator-fixed"; - regulator-name = "v3v3_sw"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_adc: vdd-adc { - compatible = "regulator-fixed"; - regulator-name = "vdd_adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd: vdd-sd { - compatible = "regulator-fixed"; - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - - vdd_usb: vdd-usb { - compatible = "regulator-fixed"; - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - -&adc_1 { - pinctrl-names = "default"; - pinctrl-0 = <&adc1_usb_cc_pins_a>; - vdda-supply = <&vdd_adc>; - vref-supply = <&vdd_adc>; - status = "okay"; - adc1: adc@0 { - status = "okay"; - /* - * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12. - * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: - * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. - * Use arbitrary margin here (e.g. 5us). - */ - channel@6 { - reg = <6>; - st,min-sample-time-ns = <5000>; - }; - channel@12 { - reg = <12>; - st,min-sample-time-ns = <5000>; - }; - }; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_sleep_pins_a>; - i2c-scl-rising-time-ns = <96>; - i2c-scl-falling-time-ns = <3>; - clock-frequency = <1000000>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - mcp23017: pinctrl@21 { - compatible = "microchip,mcp23017"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpiog>; - pinctrl-names = "default"; - pinctrl-0 = <&mcp23017_pins_a>; - interrupt-controller; - #interrupt-cells = <2>; - microchip,irq-mirror; - }; - - typec@53 { - compatible = "st,stm32g0-typec"; - reg = <0x53>; - /* Alert pin on PI2 */ - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpioi>; - /* Internal pull-up on PI2 */ - pinctrl-names = "default"; - pinctrl-0 = <&stm32g0_intn_pins_a>; - firmware-name = "stm32g0-ucsi.mp135f-dk.fw"; - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - - port { - con_usb_c_g0_ep: endpoint { - remote-endpoint = <&usbotg_hs_ep>; - }; - }; - }; - }; -}; - -&i2c5 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_pins_a>; - pinctrl-1 = <&i2c5_sleep_pins_a>; - i2c-scl-rising-time-ns = <170>; - i2c-scl-falling-time-ns = <5>; - clock-frequency = <400000>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - disable-wp; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&vdd_sd>; - status = "okay"; -}; - -&spi5 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi5_pins_a>; - pinctrl-1 = <&spi5_sleep_pins_a>; - status = "disabled"; -}; - -&timers3 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm3_pins_a>; - pinctrl-1 = <&pwm3_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@2 { - status = "okay"; - }; -}; - -&timers4 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm4_pins_a>; - pinctrl-1 = <&pwm4_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@3 { - status = "okay"; - }; -}; - -&timers8 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm8_pins_a>; - pinctrl-1 = <&pwm8_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@7 { - status = "okay"; - }; -}; - -&timers14 { - status = "disabled"; - pwm { - pinctrl-0 = <&pwm14_pins_a>; - pinctrl-1 = <&pwm14_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@13 { - status = "okay"; - }; -}; - -&uart4 { - pinctrl-names = "default", "sleep", "idle"; - pinctrl-0 = <&uart4_pins_a>; - pinctrl-1 = <&uart4_sleep_pins_a>; - pinctrl-2 = <&uart4_idle_pins_a>; - /delete-property/dmas; - /delete-property/dma-names; - status = "okay"; -}; - -&uart8 { - pinctrl-names = "default", "sleep", "idle"; - pinctrl-0 = <&uart8_pins_a>; - pinctrl-1 = <&uart8_sleep_pins_a>; - pinctrl-2 = <&uart8_idle_pins_a>; - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; -}; - -&usart1 { - pinctrl-names = "default", "sleep", "idle"; - pinctrl-0 = <&usart1_pins_a>; - pinctrl-1 = <&usart1_sleep_pins_a>; - pinctrl-2 = <&usart1_idle_pins_a>; - uart-has-rtscts; - status = "disabled"; -}; - -/* Bluetooth */ -&usart2 { - pinctrl-names = "default", "sleep", "idle"; - pinctrl-0 = <&usart2_pins_a>; - pinctrl-1 = <&usart2_sleep_pins_a>; - pinctrl-2 = <&usart2_idle_pins_a>; - uart-has-rtscts; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - /* onboard HUB */ - hub@1 { - compatible = "usb424,2514"; - reg = <1>; - vdd-supply = <&v3v3_sw>; - }; -}; - -&usbotg_hs { - phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; - usb-role-switch; - status = "okay"; - port { - usbotg_hs_ep: endpoint { - remote-endpoint = <&con_usb_c_g0_ep>; - }; - }; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; - st,current-boost-microamp = <1000>; - st,decrease-hs-slew-rate; - st,tune-hs-dc-level = <2>; - st,enable-hs-rftime-reduction; - st,trim-hs-current = <11>; - st,trim-hs-impedance = <2>; - st,tune-squelch-level = <1>; - st,enable-hs-rx-gain-eq; - st,no-hs-ftime-ctrl; - st,no-lsfs-sc; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; - st,current-boost-microamp = <1000>; - st,decrease-hs-slew-rate; - st,tune-hs-dc-level = <2>; - st,enable-hs-rftime-reduction; - st,trim-hs-current = <11>; - st,trim-hs-impedance = <2>; - st,tune-squelch-level = <1>; - st,enable-hs-rx-gain-eq; - st,no-hs-ftime-ctrl; - st,no-lsfs-sc; -}; |