diff options
Diffstat (limited to 'arch/arm/boot/dts/s5pv210-aries.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/s5pv210-aries.dtsi | 90 |
1 files changed, 79 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index cf858029292e..822207f63ee0 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -69,6 +69,18 @@ pinctrl-0 = <&touchkey_vdd_ena>; }; + gp2a_vled: regulator-fixed-2 { + compatible = "regulator-fixed"; + regulator-name = "VLED"; + enable-active-high; + gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_power>; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; @@ -137,9 +149,13 @@ pinctrl-names = "default"; pinctrl-0 = <&accel_i2c_pins>; - status = "disabled"; + accelerometer@38 { + compatible = "bosch,bma023"; + reg = <0x38>; - /* bma023 accelerometer, no mainline binding */ + vdd-supply = <&ldo9_reg>; + vddio-supply = <&ldo9_reg>; + }; }; i2c_pmic: i2c-gpio-2 { @@ -425,10 +441,8 @@ pinctrl-names = "default"; pinctrl-0 = <&fg_i2c_pins>; - fuelgauge@36 { + fg: fuelgauge@36 { compatible = "maxim,max17040"; - interrupt-parent = <&vic0>; - interrupts = <7>; reg = <0x36>; }; }; @@ -470,9 +484,21 @@ pinctrl-names = "default"; pinctrl-0 = <&prox_i2c_pins>; - status = "disabled"; + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupt-parent = <&gph0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&gp2a_vled>; + vio-supply = <&gp2a_vled>; + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x20>; - /* Sharp gp2a prox/light sensor, incomplete mainline binding */ + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_irq>; + }; }; i2c_magnetometer: i2c-gpio-7 { @@ -545,6 +571,14 @@ vdd-supply = <&ldo4_reg>; status = "okay"; + + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&adc 9>; + shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */ + #io-channel-cells = <0>; + io-channel-ranges; + }; }; &fimd { @@ -595,6 +629,13 @@ }; &pinctrl0 { + bt_reset: bt-reset { + samsung,pins = "gpb-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + wlan_bt_en: wlan-bt-en { samsung,pins = "gpb-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; @@ -620,6 +661,19 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; + bt_wake: bt-wake { + samsung,pins = "gpg3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + gp2a_irq: gp2a-irq { + samsung,pins = "gph0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + pmic_dvs_pins: pmic-dvs-pins { samsung,pins = "gph0-3", "gph0-4", "gph0-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; @@ -688,6 +742,13 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + gp2a_power: gp2a-power { + samsung,pins = "gpj1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + touchkey_i2c_pins: touchkey-i2c-pins { samsung,pins = "gpj3-0", "gpj3-1"; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; @@ -797,16 +858,23 @@ }; &uart0 { + assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>; + assigned-clock-rates = <0>, <111166667>; + assigned-clock-parents = <&clocks MOUT_MPLL>; + status = "okay"; bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <115200>; + compatible = "brcm,bcm4329-bt"; + max-speed = <3000000>; pinctrl-names = "default"; - pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>; + pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake + &bt_reset &bt_wake>; shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gph2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; }; }; |