diff options
Diffstat (limited to 'arch/arm/boot/dts/omap5.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap5.dtsi | 688 |
1 files changed, 6 insertions, 682 deletions
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 574ac11c0489..2fefaafdf901 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,6 +7,7 @@ * Based on "omap4.dtsi" */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> @@ -151,178 +152,13 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,omap5-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x22a000>; - - scm_core: scm@2000 { - compatible = "ti,omap5-scm-core", "simple-bus"; - reg = <0x2000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x800>; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - scm_padconf_core: scm@2800 { - compatible = "ti,omap5-scm-padconf-core", - "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2800 0x800>; - - omap5_pmx_core: pinmux@40 { - compatible = "ti,omap5-padconf", - "pinctrl-single"; - reg = <0x40 0x01b6>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap5_padconf_global: omap5_padconf_global@5a0 { - compatible = "syscon", - "simple-bus"; - reg = <0x5a0 0xec>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5a0 0xec>; - - pbias_regulator: pbias_regulator@60 { - compatible = "ti,pbias-omap5", "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap5_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - }; - - cm_core_aon: cm_core_aon@4000 { - compatible = "ti,omap5-cm-core-aon", - "simple-bus"; - reg = <0x4000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@8000 { - compatible = "ti,omap5-cm-core", "simple-bus"; - reg = <0x8000 0x3000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x8000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; + l4_wkup: interconnect@4ae00000 { }; - l4_wkup: l4@4ae00000 { - compatible = "ti,omap5-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4ae00000 0x2b000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x40>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,omap5-prm", "simple-bus"; - reg = <0x6000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x3000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@a000 { - compatible = "ti,omap5-scrm"; - reg = <0xa000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - omap5_pmx_wkup: pinmux@c840 { - compatible = "ti,omap5-padconf", - "pinctrl-single"; - reg = <0xc840 0x003c>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@cda0 { - compatible = "ti,omap5-scm-wkup-pad-conf", - "simple-bus"; - reg = <0xcda0 0x60>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xcda0 0x60>; - - scm_wkup_pad_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x60>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x60>; + l4_cfg: interconnect@4a000000 { + }; - scm_wkup_pad_conf_clocks: clocks@0 { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; + l4_per: interconnect@48000000 { }; ocmcram: ocmcram@40300000 { @@ -330,108 +166,6 @@ reg = <0x40300000 0x20000>; /* 128k */ }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - - gpio1: gpio@4ae10000 { - compatible = "ti,omap4-gpio"; - reg = <0x4ae10000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@48051000 { - compatible = "ti,omap4-gpio"; - reg = <0x48051000 0x200>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio7"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio8: gpio@48053000 { - compatible = "ti,omap4-gpio"; - reg = <0x48053000 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio8"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; @@ -451,217 +185,6 @@ #gpio-cells = <2>; }; - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@4807a000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807a000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - i2c5: i2c@4807c000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807c000 0x100>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c5"; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; - dma-names = "tx0", "rx0"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; - dma-names = "tx0", "rx0"; - }; - - uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - }; - - uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - }; - - uart3: serial@48020000 { - compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - }; - - uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - uart5: serial@48066000 { - compatible = "ti,omap4-uart"; - reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - }; - - uart6: serial@48068000 { - compatible = "ti,omap4-uart"; - reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; - dma-names = "tx", "rx"; - pbias-supply = <&pbias_mmc_reg>; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; - dma-names = "tx", "rx"; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; - dma-names = "tx", "rx"; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; - dma-names = "tx", "rx"; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - dmas = <&sdma 59>, <&sdma 60>; - dma-names = "tx", "rx"; - }; - mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -679,12 +202,6 @@ ti,iommu-bus-err-back; }; - keypad: keypad@4ae1c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4ae1c000 0x400>; - ti,hwmods = "kbd"; - }; - mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ @@ -755,55 +272,6 @@ status = "disabled"; }; - mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; - }; - - timer1: timer@4ae18000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae18000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; - clock-names = "fck"; - }; - - timer2: timer@48032000 { - compatible = "ti,omap5430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap5430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap5430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - timer5: timer@40138000 { compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, @@ -843,37 +311,6 @@ ti,timer-pwm; }; - timer9: timer@4803e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - ti,timer-pwm; - }; - - timer10: timer@48086000 { - compatible = "ti,omap5430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - ti,timer-pwm; - }; - - timer11: timer@48088000 { - compatible = "ti,omap5430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - ti,timer-pwm; - }; - - wdt2: wdt@4ae14000 { - compatible = "ti,omap5-wdt", "ti,omap3-wdt"; - reg = <0x4ae14000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -905,99 +342,6 @@ hw-caps-temp-alert; }; - usb3: omap_dwc3@4a020000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x10000>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - dwc3: dwc3@4a030000 { - compatible = "snps,dwc3"; - reg = <0x4a030000 0x10000>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy>, <&usb3_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "peripheral"; - }; - }; - - ocp2scp@4a080000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x4a080000 0x20>; - ranges; - ti,hwmods = "ocp2scp1"; - usb2_phy: usb2phy@4a084000 { - compatible = "ti,omap-usb2"; - reg = <0x4a084000 0x7c>; - syscon-phy-power = <&scm_conf 0x300>; - clocks = <&usb_phy_cm_clk32k>, - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - }; - - usb3_phy: usb3phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x370>; - clocks = <&usb_phy_cm_clk32k>, - <&sys_clkin>, - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; - #phy-cells = <0>; - }; - }; - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "usb_tll_hs"; - }; - - usbhshost: usbhshost@4a064000 { - compatible = "ti,usbhs-host"; - reg = <0x4a064000 0x800>; - ti,hwmods = "usb_host_hs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&l3init_60m_fclk>, - <&xclk60mhsp1_ck>, - <&xclk60mhsp2_ck>; - clock-names = "refclk_60m_int", - "refclk_60m_ext_p1", - "refclk_60m_ext_p2"; - - usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - remote-wakeup-connected; - }; - - usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -1010,27 +354,6 @@ }; /* OCP2SCP3 */ - ocp2scp@4a090000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x4a090000 0x20>; - ranges; - ti,hwmods = "ocp2scp3"; - sata_phy: phy@4a096000 { - compatible = "ti,phy-pipe3-sata"; - reg = <0x4A096000 0x80>, /* phy_rx */ - <0x4A096400 0x64>, /* phy_tx */ - <0x4A096800 0x40>; /* pll_ctrl */ - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin>, - <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - clock-names = "sysclk", "refclk"; - #phy-cells = <0>; - }; - }; - sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; @@ -1184,6 +507,7 @@ coefficients = <65 (-1791)>; }; +#include "omap5-l4.dtsi" #include "omap54xx-clocks.dtsi" &gpu_thermal { |