diff options
Diffstat (limited to 'arch/arm/boot/dts/am437x-gp-evm.dts')
| -rw-r--r-- | arch/arm/boot/dts/am437x-gp-evm.dts | 144 |
1 files changed, 142 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 26956cb50835..84aa30c3235a 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -21,6 +21,7 @@ aliases { display0 = &lcd0; + serial3 = &uart3; }; vmmcsd_fixed: fixedregulator-sd { @@ -42,6 +43,15 @@ gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; }; + vmmcwl_fixed: fixedregulator-mmcwl { + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; @@ -106,9 +116,21 @@ }; }; }; + + /* fixed 12MHz oscillator */ + refclk: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + }; &am43xx_pinmux { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wlan_pins_default>; + pinctrl-1 = <&wlan_pins_sleep>; + i2c0_pins: i2c0_pins { pinctrl-single,pins = < 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ @@ -340,6 +362,53 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ >; }; + + mmc3_pins_default: pinmux_mmc3_pins_default { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ + >; + }; + + wlan_pins_default: pinmux_wlan_pins_default { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + >; + }; + + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + >; + }; + + uart3_pins: uart3_pins { + pinctrl-single,pins = < + 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ + 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ + 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ + 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ + >; + }; }; &i2c0 { @@ -403,6 +472,21 @@ regulator-always-on; }; }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&refclk 0>; + clock-names = "xvclk"; + + port { + ov2659_0: endpoint { + remote-endpoint = <&vpfe1_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &i2c1 { @@ -422,6 +506,21 @@ touchscreen-size-x = <1024>; touchscreen-size-y = <600>; }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&refclk 0>; + clock-names = "xvclk"; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &epwmss0 { @@ -446,6 +545,10 @@ status = "okay"; }; +&gpio1 { + status = "okay"; +}; + &gpio3 { status = "okay"; }; @@ -468,6 +571,43 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +&mmc3 { + status = "okay"; + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 30 + &edma 31>; + dma-names = "tx", "rx"; + vmmc-supply = <&vmmcwl_fixed>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_sleep>; + cap-power-off-card; + keep-power-in-suspend; + ti,non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 30 + 2 31>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + &usb2_phy1 { status = "okay"; }; @@ -625,7 +765,7 @@ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; @@ -642,7 +782,7 @@ port { vpfe1_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_0>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; |