diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 124 |
1 files changed, 76 insertions, 48 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006e..b92925c70172 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration" config ARM bool default y + select HAVE_IDE select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE @@ -83,6 +84,11 @@ config STACKTRACE_SUPPORT bool default y +config HAVE_LATENCYTOP_SUPPORT + bool + depends on !SMP + default y + config LOCKDEP_SUPPORT bool default y @@ -146,6 +152,10 @@ config FIQ config ARCH_MTD_XIP bool +config GENERIC_HARDIRQS_NO__DO_IRQ + bool + def_bool y + if OPROFILE config OPROFILE_ARMV6 @@ -223,7 +233,6 @@ config ARCH_CLPS7500 select TIMER_ACORN select ISA select NO_IOPORT - select HAVE_IDE help Support for the Cirrus Logic PS7500FE system-on-a-chip. @@ -232,14 +241,6 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. -config ARCH_CO285 - bool "Co-EBSA285" - select FOOTBRIDGE - select FOOTBRIDGE_ADDIN - select HAVE_IDE - help - Support for Intel's EBSA285 companion chip. - config ARCH_EBSA110 bool "EBSA-110" select ISA @@ -255,13 +256,13 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO + select HAVE_GPIO_LIB help This enables support for the Cirrus EP93xx series of CPUs. config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE - select HAVE_IDE help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -300,7 +301,8 @@ config ARCH_IOP32X depends on MMU select PLAT_IOP select PCI - select HAVE_IDE + select GENERIC_GPIO + select HAVE_GPIO_LIB help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -310,14 +312,14 @@ config ARCH_IOP33X depends on MMU select PLAT_IOP select PCI - select HAVE_IDE + select GENERIC_GPIO + select HAVE_GPIO_LIB help Support for Intel's IOP33X (XScale) family of processors. config ARCH_IXP23XX bool "IXP23XX-based" depends on MMU - select HAVE_IDE select PCI help Support for Intel's IXP23xx (XScale) family of processors. @@ -335,14 +337,12 @@ config ARCH_IXP4XX select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS - select HAVE_IDE help Support for Intel's IXP4XX (XScale) family of processors. config ARCH_L7200 bool "LinkUp-L7200" select FIQ - select HAVE_IDE help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -353,6 +353,16 @@ config ARCH_L7200 If you have any questions or comments about the Linux kernel port to this board, send e-mail to <sjhill@cotw.com>. +config ARCH_KIRKWOOD + bool "Marvell Kirkwood" + select PCI + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select PLAT_ORION + help + Support for the following Marvell Kirkwood series SoCs: + 88F6180, 88F6192 and 88F6281. + config ARCH_KS8695 bool "Micrel/Kendin KS8695" select GENERIC_GPIO @@ -371,21 +381,42 @@ config ARCH_NS9XXX <http://www.digi.com/products/microprocessors/index.jsp> +config ARCH_LOKI + bool "Marvell Loki (88RC8480)" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select PLAT_ORION + help + Support for the Marvell Loki (88RC8480) SoC. + +config ARCH_MV78XX0 + bool "Marvell MV78xx0" + select PCI + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select PLAT_ORION + help + Support for the following Marvell MV78xx0 series SoCs: + MV781x0, MV782x0. + config ARCH_MXC bool "Freescale MXC/iMX-based" select ARCH_MTD_XIP help Support for Freescale MXC/iMX-based family of processors -config ARCH_ORION +config ARCH_ORION5X bool "Marvell Orion" depends on MMU select PCI select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select PLAT_ORION help - Support for Marvell Orion System on Chip family. + Support for the following Marvell Orion 5x series SoCs: + Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), + Orion-2 (5281). config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" @@ -397,7 +428,6 @@ config ARCH_PXA depends on MMU select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_IDE select HAVE_GPIO_LIB select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -411,9 +441,9 @@ config ARCH_RPC select FIQ select TIMER_ACORN select ARCH_MAY_HAVE_PC_FDC + select HAVE_PATA_PLATFORM select ISA_DMA_API select NO_IOPORT - select HAVE_IDE help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -422,17 +452,20 @@ config ARCH_SA1100 bool "SA1100-based" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL select ARCH_MTD_XIP select GENERIC_GPIO select GENERIC_TIME - select HAVE_IDE + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select HAVE_GPIO_LIB help Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO - select HAVE_IDE help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -440,7 +473,6 @@ config ARCH_S3C2410 config ARCH_SHARK bool "Shark" - select HAVE_IDE select ISA select ISA_DMA select PCI @@ -450,7 +482,6 @@ config ARCH_SHARK config ARCH_LH7A40X bool "Sharp LH7A40X" - select HAVE_IDE help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T @@ -468,6 +499,7 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" select GENERIC_GPIO + select HAVE_GPIO_LIB select GENERIC_TIME select GENERIC_CLOCKEVENTS help @@ -506,6 +538,10 @@ source "arch/arm/mach-ixp2000/Kconfig" source "arch/arm/mach-ixp23xx/Kconfig" +source "arch/arm/mach-loki/Kconfig" + +source "arch/arm/mach-mv78xx0/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig" @@ -516,7 +552,9 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" -source "arch/arm/mach-orion/Kconfig" +source "arch/arm/mach-orion5x/Kconfig" + +source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" @@ -563,6 +601,9 @@ config ARCH_ACORN config PLAT_IOP bool +config PLAT_ORION + bool + source arch/arm/mm/Kconfig config IWMMXT @@ -650,7 +691,7 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -683,7 +724,7 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && REALVIEW_EB_ARM11MP + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) default y help Enable support for local timers on SMP platforms, rather then the @@ -704,27 +745,6 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. -config NO_IDLE_HZ - bool "Dynamic tick timer" - depends on !GENERIC_CLOCKEVENTS - help - Select this option if you want to disable continuous timer ticks - and have them programmed to occur as required. This option saves - power as the system can remain in idle state for longer. - - By default dynamic tick is disabled during the boot, and can be - manually enabled with: - - echo 1 > /sys/devices/system/timer/timer0/dyn_tick - - Alternatively, if you want dynamic tick automatically enabled - during boot, pass "dyntick=enable" via the kernel command string. - - Please note that dynamic tick may affect the accuracy of - timekeeping on some platforms depending on the implementation. - Currently at least OMAP, PXA2xx and SA11x0 platforms are known - to have accurate timekeeping with dynamic tick. - config HZ int default 128 if ARCH_L7200 @@ -774,6 +794,12 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +config ARCH_SPARSEMEM_ENABLE + bool + +config ARCH_SELECT_MEMORY_MODEL + bool + config NODES_SHIFT int default "4" if ARCH_LH7A40X @@ -784,7 +810,7 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" - depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ + depends on ARCH_CDB89712 || ARCH_EBSA110 || \ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ @@ -1174,6 +1200,8 @@ source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" +source "drivers/uio/Kconfig" + endmenu source "fs/Kconfig" |