diff options
Diffstat (limited to 'Documentation')
782 files changed, 14153 insertions, 6885 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem new file mode 100644 index 000000000000..5923ab4620c5 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-nvmem @@ -0,0 +1,19 @@ +What: /sys/bus/nvmem/devices/.../nvmem +Date: July 2015 +KernelVersion: 4.2 +Contact: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +Description: + This file allows user to read/write the raw NVMEM contents. + Permissions for write to this file depends on the nvmem + provider configuration. + + ex: + hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + + 0000000 0000 0000 0000 0000 0000 0000 0000 0000 + * + 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 + 0000000 0000 0000 0000 0000 0000 0000 0000 0000 + ... + * + 0001000 diff --git a/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma new file mode 100644 index 000000000000..420c1d09e42f --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma @@ -0,0 +1,30 @@ +What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap +Date: December 3, 2009 +KernelVersion: 2.6.32 +Contact: dmaengine@vger.kernel.org +Description: Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL, + DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT. + +What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active +Date: December 3, 2009 +KernelVersion: 2.6.32 +Contact: dmaengine@vger.kernel.org +Description: The number of descriptors active in the ring. + +What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size +Date: December 3, 2009 +KernelVersion: 2.6.32 +Contact: dmaengine@vger.kernel.org +Description: Descriptor ring size, total number of descriptors available. + +What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version +Date: December 3, 2009 +KernelVersion: 2.6.32 +Contact: dmaengine@vger.kernel.org +Description: Version of ioatdma device. + +What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce +Date: August 8, 2017 +KernelVersion: 4.14 +Contact: dmaengine@vger.kernel.org +Description: Tune-able interrupt delay value per channel basis. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis index e32879b84b4d..137399095d74 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-rndis +++ b/Documentation/ABI/testing/configfs-usb-gadget-rndis @@ -12,3 +12,6 @@ Description: Ethernet over USB link dev_addr - MAC address of device's end of this Ethernet over USB link + class - USB interface class, default is 02 (hex) + subclass - USB interface subclass, default is 06 (hex) + protocol - USB interface protocol, default is 00 (hex) diff --git a/Documentation/ABI/testing/ppc-memtrace b/Documentation/ABI/testing/ppc-memtrace new file mode 100644 index 000000000000..2e8b93741270 --- /dev/null +++ b/Documentation/ABI/testing/ppc-memtrace @@ -0,0 +1,45 @@ +What: /sys/kernel/debug/powerpc/memtrace +Date: Aug 2017 +KernelVersion: 4.14 +Contact: linuxppc-dev@lists.ozlabs.org +Description: This folder contains the relevant debugfs files for the + hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING + must be set. + +What: /sys/kernel/debug/powerpc/memtrace/enable +Date: Aug 2017 +KernelVersion: 4.14 +Contact: linuxppc-dev@lists.ozlabs.org +Description: Write an integer containing the size in bytes of the memory + you want removed from each NUMA node to this file - it must be + aligned to the memblock size. This amount of RAM will be removed + from the kernel mappings and the following debugfs files will be + created. This can only be successfully done once per boot. Once + memory is successfully removed from each node, the following + files are created. + +What: /sys/kernel/debug/powerpc/memtrace/<node-id> +Date: Aug 2017 +KernelVersion: 4.14 +Contact: linuxppc-dev@lists.ozlabs.org +Description: This directory contains information about the removed memory + from the specific NUMA node. + +What: /sys/kernel/debug/powerpc/memtrace/<node-id>/size +Date: Aug 2017 +KernelVersion: 4.14 +Contact: linuxppc-dev@lists.ozlabs.org +Description: This contains the size of the memory removed from the node. + +What: /sys/kernel/debug/powerpc/memtrace/<node-id>/start +Date: Aug 2017 +KernelVersion: 4.14 +Contact: linuxppc-dev@lists.ozlabs.org +Description: This contains the start address of the removed memory. + +What: /sys/kernel/debug/powerpc/memtrace/<node-id>/trace +Date: Aug 2017 +KernelVersion: 4.14 +Contact: linuxppc-dev@lists.ozlabs.org +Description: This is where the hardware trace macro will output the trace + it generates. diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup new file mode 100644 index 000000000000..0a54ed0d63c9 --- /dev/null +++ b/Documentation/ABI/testing/procfs-smaps_rollup @@ -0,0 +1,31 @@ +What: /proc/pid/smaps_rollup +Date: August 2017 +Contact: Daniel Colascione <dancol@google.com> +Description: + This file provides pre-summed memory information for a + process. The format is identical to /proc/pid/smaps, + except instead of an entry for each VMA in a process, + smaps_rollup has a single entry (tagged "[rollup]") + for which each field is the sum of the corresponding + fields from all the maps in /proc/pid/smaps. + For more details, see the procfs man page. + + Typical output looks like this: + + 00100000-ff709000 ---p 00000000 00:00 0 [rollup] + Rss: 884 kB + Pss: 385 kB + Shared_Clean: 696 kB + Shared_Dirty: 0 kB + Private_Clean: 120 kB + Private_Dirty: 68 kB + Referenced: 884 kB + Anonymous: 68 kB + LazyFree: 0 kB + AnonHugePages: 0 kB + ShmemPmdMapped: 0 kB + Shared_Hugetlb: 0 kB + Private_Hugetlb: 0 kB + Swap: 0 kB + SwapPss: 0 kB + Locked: 385 kB diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index 451b6d882b2c..c1513c756af1 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -90,3 +90,11 @@ Description: device's debugging info useful for kernel developers. Its format is not documented intentionally and may change anytime without any notice. + +What: /sys/block/zram<id>/backing_dev +Date: June 2017 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The backing_dev file is read-write and set up backing + device for zram to write incompressible pages. + For using, user should enable CONFIG_ZRAM_WRITEBACK. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 2db2cdf42d54..7eead5f97e02 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -119,6 +119,15 @@ Description: unique to allow association with event codes. Units after application of scale and offset are milliamps. +What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc.) power measurement from + channel Y. The number must always be specified and + unique to allow association with event codes. Units after + application of scale and offset are milliwatts. + What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 new file mode 100644 index 000000000000..ad2cc63e4bf8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 @@ -0,0 +1,57 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Reading returns the current preset value. Writing sets the + preset value. Encoder counts continuously from 0 to preset + value, depending on direction (up/down). + +What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Reading returns the list possible quadrature modes. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Configure the device counter quadrature modes: + - non-quadrature: + Encoder IN1 input servers as the count input (up + direction). + - quadrature: + Encoder IN1 and IN2 inputs are mixed to get direction + and count. + +What: /sys/bus/iio/devices/iio:deviceX/in_count_polarity_available +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Reading returns the list possible active edges. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_polarity +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Configure the device encoder/counter active edge: + - rising-edge + - falling-edge + - both-edges + + In non-quadrature mode, device counts up on active edge. + In quadrature mode, encoder counting scenarios are as follows: + ---------------------------------------------------------------- + | Active | Level on | IN1 signal | IN2 signal | + | edge | opposite |------------------------------------------ + | | signal | Rising | Falling | Rising | Falling | + ---------------------------------------------------------------- + | Rising | High -> | Down | - | Up | - | + | edge | Low -> | Up | - | Down | - | + ---------------------------------------------------------------- + | Falling | High -> | - | Up | - | Down | + | edge | Low -> | - | Down | - | Up | + ---------------------------------------------------------------- + | Both | High -> | Down | Up | Up | Down | + | edges | Low -> | Up | Down | Down | Up | + ---------------------------------------------------------------- diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 2a98149943ea..392bef5bd399 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -45,6 +45,8 @@ Contact: thunderbolt-software@lists.01.org Description: When a devices supports Thunderbolt secure connect it will have this attribute. Writing 32 byte hex string changes authorization to use the secure connection method instead. + Writing an empty string clears the key and regular connection + method can be used again. What: /sys/bus/thunderbolt/devices/.../device Date: Sep 2017 diff --git a/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/Documentation/ABI/testing/sysfs-bus-usb-lvstest index 5151290cf8e7..ee0046dc4192 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb-lvstest +++ b/Documentation/ABI/testing/sysfs-bus-usb-lvstest @@ -45,3 +45,16 @@ Contact: Pratyush Anand <pratyush.anand@gmail.com> Description: Write to this node to issue "U3 exit" for Link Layer Validation device. It is needed for TD.7.36. + +What: /sys/bus/usb/devices/.../enable_compliance +Date: July 2017 +Description: + Write to this node to set the port to compliance mode to test + with Link Layer Validation device. It is needed for TD.7.34. + +What: /sys/bus/usb/devices/.../warm_reset +Date: July 2017 +Description: + Write to this node to issue "Warm Reset" for Link Layer Validation + device. It may be needed to properly reset an xHCI 1.1 host port if + compliance mode needed to be explicitly enabled. diff --git a/Documentation/ABI/testing/sysfs-driver-altera-cvp b/Documentation/ABI/testing/sysfs-driver-altera-cvp new file mode 100644 index 000000000000..8cde64a71edb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-altera-cvp @@ -0,0 +1,8 @@ +What: /sys/bus/pci/drivers/altera-cvp/chkcfg +Date: May 2017 +Kernel Version: 4.13 +Contact: Anatolij Gustschin <agust@denx.de> +Description: + Contains either 1 or 0 and controls if configuration + error checking in altera-cvp driver is turned on or + off. diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap new file mode 100644 index 000000000000..c9b66ec4f165 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap @@ -0,0 +1,31 @@ +What: /sys/firmware/opal/powercap +Date: August 2017 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: Powercap directory for Powernv (P8, P9) servers + + Each folder in this directory contains a + power-cappable component. + +What: /sys/firmware/opal/powercap/system-powercap + /sys/firmware/opal/powercap/system-powercap/powercap-min + /sys/firmware/opal/powercap/system-powercap/powercap-max + /sys/firmware/opal/powercap/system-powercap/powercap-current +Date: August 2017 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: System powercap directory and attributes applicable for + Powernv (P8, P9) servers + + This directory provides powercap information. It + contains below sysfs attributes: + + - powercap-min : This file provides the minimum + possible powercap in Watt units + + - powercap-max : This file provides the maximum + possible powercap in Watt units + + - powercap-current : This file provides the current + powercap set on the system. Writing to this file + creates a request for setting a new-powercap. The + powercap requested must be between powercap-min + and powercap-max. diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr new file mode 100644 index 000000000000..cc2ece70e365 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr @@ -0,0 +1,18 @@ +What: /sys/firmware/opal/psr +Date: August 2017 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: Power-Shift-Ratio directory for Powernv P9 servers + + Power-Shift-Ratio allows to provide hints the firmware + to shift/throttle power between different entities in + the system. Each attribute in this directory indicates + a settable PSR. + +What: /sys/firmware/opal/psr/cpu_to_gpu_X +Date: August 2017 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: PSR sysfs attributes for Powernv P9 servers + + Power-Shift-Ratio between CPU and GPU for a given chip + with chip-id X. This file gives the ratio (0-100) + which is used by OCC for power-capping. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-swap b/Documentation/ABI/testing/sysfs-kernel-mm-swap new file mode 100644 index 000000000000..587db52084c7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-swap @@ -0,0 +1,26 @@ +What: /sys/kernel/mm/swap/ +Date: August 2017 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Interface for swapping + +What: /sys/kernel/mm/swap/vma_ra_enabled +Date: August 2017 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: Enable/disable VMA based swap readahead. + + If set to true, the VMA based swap readahead algorithm + will be used for swappable anonymous pages mapped in a + VMA, and the global swap readahead algorithm will be + still used for tmpfs etc. other users. If set to + false, the global swap readahead algorithm will be + used for all swappable pages. + +What: /sys/kernel/mm/swap/vma_ra_max_order +Date: August 2017 +Contact: Linux memory management mailing list <linux-mm@kvack.org> +Description: The max readahead size in order for VMA based swap readahead + + VMA based swap readahead algorithm will readahead at + most 1 << max_order pages for each readahead. The + real readahead size for each readahead will be scaled + according to the estimation algorithm. diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index f523e5a3ac33..713cab1d5f12 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -273,3 +273,15 @@ Description: This output is useful for system wakeup diagnostics of spurious wakeup interrupts. + +What: /sys/power/pm_debug_messages +Date: July 2017 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/pm_debug_messages file controls the printing + of debug messages from the system suspend/hiberbation + infrastructure to the kernel log. + + Writing a "1" to this file enables the debug messages and + writing a "0" (default) to it disables them. Reads from + this file return the current value. diff --git a/Documentation/Makefile b/Documentation/Makefile index a42320385df3..85f7856f0092 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -22,6 +22,8 @@ ifeq ($(HAVE_SPHINX),0) .DEFAULT: $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.) + @echo + @./scripts/sphinx-pre-install @echo " SKIP Sphinx $@ target." else # HAVE_SPHINX @@ -95,16 +97,6 @@ endif # HAVE_SPHINX # The following targets are independent of HAVE_SPHINX, and the rules should # work or silently pass without Sphinx. -# no-ops for the Sphinx toolchain -sgmldocs: - @: -psdocs: - @: -mandocs: - @: -installmandocs: - @: - cleandocs: $(Q)rm -rf $(BUILDDIR) $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html index 95b30fa25d56..62e847bcdcdd 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.html +++ b/Documentation/RCU/Design/Requirements/Requirements.html @@ -2080,6 +2080,8 @@ Some of the relevant points of interest are as follows: <li> <a href="#Scheduler and RCU">Scheduler and RCU</a>. <li> <a href="#Tracing and RCU">Tracing and RCU</a>. <li> <a href="#Energy Efficiency">Energy Efficiency</a>. +<li> <a href="#Scheduling-Clock Interrupts and RCU"> + Scheduling-Clock Interrupts and RCU</a>. <li> <a href="#Memory Efficiency">Memory Efficiency</a>. <li> <a href="#Performance, Scalability, Response Time, and Reliability"> Performance, Scalability, Response Time, and Reliability</a>. @@ -2532,6 +2534,134 @@ I learned of many of these requirements via angry phone calls: Flaming me on the Linux-kernel mailing list was apparently not sufficient to fully vent their ire at RCU's energy-efficiency bugs! +<h3><a name="Scheduling-Clock Interrupts and RCU"> +Scheduling-Clock Interrupts and RCU</a></h3> + +<p> +The kernel transitions between in-kernel non-idle execution, userspace +execution, and the idle loop. +Depending on kernel configuration, RCU handles these states differently: + +<table border=3> +<tr><th><tt>HZ</tt> Kconfig</th> + <th>In-Kernel</th> + <th>Usermode</th> + <th>Idle</th></tr> +<tr><th align="left"><tt>HZ_PERIODIC</tt></th> + <td>Can rely on scheduling-clock interrupt.</td> + <td>Can rely on scheduling-clock interrupt and its + detection of interrupt from usermode.</td> + <td>Can rely on RCU's dyntick-idle detection.</td></tr> +<tr><th align="left"><tt>NO_HZ_IDLE</tt></th> + <td>Can rely on scheduling-clock interrupt.</td> + <td>Can rely on scheduling-clock interrupt and its + detection of interrupt from usermode.</td> + <td>Can rely on RCU's dyntick-idle detection.</td></tr> +<tr><th align="left"><tt>NO_HZ_FULL</tt></th> + <td>Can only sometimes rely on scheduling-clock interrupt. + In other cases, it is necessary to bound kernel execution + times and/or use IPIs.</td> + <td>Can rely on RCU's dyntick-idle detection.</td> + <td>Can rely on RCU's dyntick-idle detection.</td></tr> +</table> + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why can't <tt>NO_HZ_FULL</tt> in-kernel execution rely on the + scheduling-clock interrupt, just like <tt>HZ_PERIODIC</tt> + and <tt>NO_HZ_IDLE</tt> do? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Because, as a performance optimization, <tt>NO_HZ_FULL</tt> + does not necessarily re-enable the scheduling-clock interrupt + on entry to each and every system call. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p> +However, RCU must be reliably informed as to whether any given +CPU is currently in the idle loop, and, for <tt>NO_HZ_FULL</tt>, +also whether that CPU is executing in usermode, as discussed +<a href="#Energy Efficiency">earlier</a>. +It also requires that the scheduling-clock interrupt be enabled when +RCU needs it to be: + +<ol> +<li> If a CPU is either idle or executing in usermode, and RCU believes + it is non-idle, the scheduling-clock tick had better be running. + Otherwise, you will get RCU CPU stall warnings. Or at best, + very long (11-second) grace periods, with a pointless IPI waking + the CPU from time to time. +<li> If a CPU is in a portion of the kernel that executes RCU read-side + critical sections, and RCU believes this CPU to be idle, you will get + random memory corruption. <b>DON'T DO THIS!!!</b> + + <br>This is one reason to test with lockdep, which will complain + about this sort of thing. +<li> If a CPU is in a portion of the kernel that is absolutely + positively no-joking guaranteed to never execute any RCU read-side + critical sections, and RCU believes this CPU to to be idle, + no problem. This sort of thing is used by some architectures + for light-weight exception handlers, which can then avoid the + overhead of <tt>rcu_irq_enter()</tt> and <tt>rcu_irq_exit()</tt> + at exception entry and exit, respectively. + Some go further and avoid the entireties of <tt>irq_enter()</tt> + and <tt>irq_exit()</tt>. + + <br>Just make very sure you are running some of your tests with + <tt>CONFIG_PROVE_RCU=y</tt>, just in case one of your code paths + was in fact joking about not doing RCU read-side critical sections. +<li> If a CPU is executing in the kernel with the scheduling-clock + interrupt disabled and RCU believes this CPU to be non-idle, + and if the CPU goes idle (from an RCU perspective) every few + jiffies, no problem. It is usually OK for there to be the + occasional gap between idle periods of up to a second or so. + + <br>If the gap grows too long, you get RCU CPU stall warnings. +<li> If a CPU is either idle or executing in usermode, and RCU believes + it to be idle, of course no problem. +<li> If a CPU is executing in the kernel, the kernel code + path is passing through quiescent states at a reasonable + frequency (preferably about once per few jiffies, but the + occasional excursion to a second or so is usually OK) and the + scheduling-clock interrupt is enabled, of course no problem. + + <br>If the gap between a successive pair of quiescent states grows + too long, you get RCU CPU stall warnings. +</ol> + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + But what if my driver has a hardware interrupt handler + that can run for many seconds? + I cannot invoke <tt>schedule()</tt> from an hardware + interrupt handler, after all! +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + One approach is to do <tt>rcu_irq_exit();rcu_irq_enter();</tt> + every so often. + But given that long-running interrupt handlers can cause + other problems, not least for response time, shouldn't you + work to keep your interrupt handler's runtime within reasonable + bounds? +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p> +But as long as RCU is properly informed of kernel state transitions between +in-kernel execution, usermode execution, and idle, and as long as the +scheduling-clock interrupt is enabled when RCU needs it to be, you +can rest assured that the bugs you encounter will be in some other +part of RCU or some other part of the kernel! + <h3><a name="Memory Efficiency">Memory Efficiency</a></h3> <p> diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 6beda556faf3..49747717d905 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -23,6 +23,14 @@ over a rather long period of time, but improvements are always welcome! Yet another exception is where the low real-time latency of RCU's read-side primitives is critically important. + One final exception is where RCU readers are used to prevent + the ABA problem (https://en.wikipedia.org/wiki/ABA_problem) + for lockless updates. This does result in the mildly + counter-intuitive situation where rcu_read_lock() and + rcu_read_unlock() are used to protect updates, however, this + approach provides the same potential simplifications that garbage + collectors do. + 1. Does the update code have proper mutual exclusion? RCU does allow -readers- to run (almost) naked, but -writers- must @@ -40,7 +48,9 @@ over a rather long period of time, but improvements are always welcome! explain how this single task does not become a major bottleneck on big multiprocessor machines (for example, if the task is updating information relating to itself that other tasks can read, there - by definition can be no bottleneck). + by definition can be no bottleneck). Note that the definition + of "large" has changed significantly: Eight CPUs was "large" + in the year 2000, but a hundred CPUs was unremarkable in 2017. 2. Do the RCU read-side critical sections make proper use of rcu_read_lock() and friends? These primitives are needed @@ -55,6 +65,12 @@ over a rather long period of time, but improvements are always welcome! Disabling of preemption can serve as rcu_read_lock_sched(), but is less readable. + Letting RCU-protected pointers "leak" out of an RCU read-side + critical section is every bid as bad as letting them leak out + from under a lock. Unless, of course, you have arranged some + other means of protection, such as a lock or a reference count + -before- letting them out of the RCU read-side critical section. + 3. Does the update code tolerate concurrent accesses? The whole point of RCU is to permit readers to run without @@ -78,10 +94,10 @@ over a rather long period of time, but improvements are always welcome! This works quite well, also. - c. Make updates appear atomic to readers. For example, + c. Make updates appear atomic to readers. For example, pointer updates to properly aligned fields will appear atomic, as will individual atomic primitives. - Sequences of perations performed under a lock will -not- + Sequences of operations performed under a lock will -not- appear to be atomic to RCU readers, nor will sequences of multiple atomic primitives. @@ -168,8 +184,8 @@ over a rather long period of time, but improvements are always welcome! 5. If call_rcu(), or a related primitive such as call_rcu_bh(), call_rcu_sched(), or call_srcu() is used, the callback function - must be written to be called from softirq context. In particular, - it cannot block. + will be called from softirq context. In particular, it cannot + block. 6. Since synchronize_rcu() can block, it cannot be called from any sort of irq context. The same rule applies for @@ -178,11 +194,14 @@ over a rather long period of time, but improvements are always welcome! synchronize_sched_expedite(), and synchronize_srcu_expedited(). The expedited forms of these primitives have the same semantics - as the non-expedited forms, but expediting is both expensive - and unfriendly to real-time workloads. Use of the expedited - primitives should be restricted to rare configuration-change - operations that would not normally be undertaken while a real-time - workload is running. + as the non-expedited forms, but expediting is both expensive and + (with the exception of synchronize_srcu_expedited()) unfriendly + to real-time workloads. Use of the expedited primitives should + be restricted to rare configuration-change operations that would + not normally be undertaken while a real-time workload is running. + However, real-time workloads can use rcupdate.rcu_normal kernel + boot parameter to completely disable expedited grace periods, + though this might have performance implications. In particular, if you find yourself invoking one of the expedited primitives repeatedly in a loop, please do everyone a favor: @@ -193,11 +212,6 @@ over a rather long period of time, but improvements are always welcome! of the system, especially to real-time workloads running on the rest of the system. - In addition, it is illegal to call the expedited forms from - a CPU-hotplug notifier, or while holding a lock that is acquired - by a CPU-hotplug notifier. Failing to observe this restriction - will result in deadlock. - 7. If the updater uses call_rcu() or synchronize_rcu(), then the corresponding readers must use rcu_read_lock() and rcu_read_unlock(). If the updater uses call_rcu_bh() or @@ -321,7 +335,7 @@ over a rather long period of time, but improvements are always welcome! Similarly, disabling preemption is not an acceptable substitute for rcu_read_lock(). Code that attempts to use preemption disabling where it should be using rcu_read_lock() will break - in real-time kernel builds. + in CONFIG_PREEMPT=y kernel builds. If you want to wait for interrupt handlers, NMI handlers, and code under the influence of preempt_disable(), you instead @@ -356,23 +370,22 @@ over a rather long period of time, but improvements are always welcome! not the case, a self-spawning RCU callback would prevent the victim CPU from ever going offline.) -14. SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(), - synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu()) - may only be invoked from process context. Unlike other forms of - RCU, it -is- permissible to block in an SRCU read-side critical - section (demarked by srcu_read_lock() and srcu_read_unlock()), - hence the "SRCU": "sleepable RCU". Please note that if you - don't need to sleep in read-side critical sections, you should be - using RCU rather than SRCU, because RCU is almost always faster - and easier to use than is SRCU. - - Also unlike other forms of RCU, explicit initialization - and cleanup is required via init_srcu_struct() and - cleanup_srcu_struct(). These are passed a "struct srcu_struct" - that defines the scope of a given SRCU domain. Once initialized, - the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock() - synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu(). - A given synchronize_srcu() waits only for SRCU read-side critical +14. Unlike other forms of RCU, it -is- permissible to block in an + SRCU read-side critical section (demarked by srcu_read_lock() + and srcu_read_unlock()), hence the "SRCU": "sleepable RCU". + Please note that if you don't need to sleep in read-side critical + sections, you should be using RCU rather than SRCU, because RCU + is almost always faster and easier to use than is SRCU. + + Also unlike other forms of RCU, explicit initialization and + cleanup is required either at build time via DEFINE_SRCU() + or DEFINE_STATIC_SRCU() or at runtime via init_srcu_struct() + and cleanup_srcu_struct(). These last two are passed a + "struct srcu_struct" that defines the scope of a given + SRCU domain. Once initialized, the srcu_struct is passed + to srcu_read_lock(), srcu_read_unlock() synchronize_srcu(), + synchronize_srcu_expedited(), and call_srcu(). A given + synchronize_srcu() waits only for SRCU read-side critical sections governed by srcu_read_lock() and srcu_read_unlock() calls that have been passed the same srcu_struct. This property is what makes sleeping read-side critical sections tolerable -- @@ -390,10 +403,16 @@ over a rather long period of time, but improvements are always welcome! Therefore, SRCU should be used in preference to rw_semaphore only in extremely read-intensive situations, or in situations requiring SRCU's read-side deadlock immunity or low read-side - realtime latency. + realtime latency. You should also consider percpu_rw_semaphore + when you need lightweight readers. - Note that, rcu_assign_pointer() relates to SRCU just as it does - to other forms of RCU. + SRCU's expedited primitive (synchronize_srcu_expedited()) + never sends IPIs to other CPUs, so it is easier on + real-time workloads than is synchronize_rcu_expedited(), + synchronize_rcu_bh_expedited() or synchronize_sched_expedited(). + + Note that rcu_dereference() and rcu_assign_pointer() relate to + SRCU just as they do to other forms of RCU. 15. The whole point of call_rcu(), synchronize_rcu(), and friends is to wait until all pre-existing readers have finished before @@ -435,3 +454,33 @@ over a rather long period of time, but improvements are always welcome! These debugging aids can help you find problems that are otherwise extremely difficult to spot. + +18. If you register a callback using call_rcu(), call_rcu_bh(), + call_rcu_sched(), or call_srcu(), and pass in a function defined + within a loadable module, then it in necessary to wait for + all pending callbacks to be invoked after the last invocation + and before unloading that module. Note that it is absolutely + -not- sufficient to wait for a grace period! The current (say) + synchronize_rcu() implementation waits only for all previous + callbacks registered on the CPU that synchronize_rcu() is running + on, but it is -not- guaranteed to wait for callbacks registered + on other CPUs. + + You instead need to use one of the barrier functions: + + o call_rcu() -> rcu_barrier() + o call_rcu_bh() -> rcu_barrier_bh() + o call_rcu_sched() -> rcu_barrier_sched() + o call_srcu() -> srcu_barrier() + + However, these barrier functions are absolutely -not- guaranteed + to wait for a grace period. In fact, if there are no call_rcu() + callbacks waiting anywhere in the system, rcu_barrier() is within + its rights to return immediately. + + So if you need to wait for both an RCU grace period and for + all pre-existing call_rcu() callbacks, you will need to execute + both rcu_barrier() and synchronize_rcu(), if necessary, using + something like workqueues to to execute them concurrently. + + See rcubarrier.txt for more information. diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt index 745f429fda79..7d4ae110c2c9 100644 --- a/Documentation/RCU/rcu.txt +++ b/Documentation/RCU/rcu.txt @@ -76,15 +76,12 @@ o I hear that RCU is patented? What is with that? Of these, one was allowed to lapse by the assignee, and the others have been contributed to the Linux kernel under GPL. There are now also LGPL implementations of user-level RCU - available (http://lttng.org/?q=node/18). + available (http://liburcu.org/). o I hear that RCU needs work in order to support realtime kernels? - This work is largely completed. Realtime-friendly RCU can be - enabled via the CONFIG_PREEMPT_RCU kernel configuration - parameter. However, work is in progress for enabling priority - boosting of preempted RCU read-side critical sections. This is - needed if you have CPU-bound realtime threads. + Realtime-friendly RCU can be enabled via the CONFIG_PREEMPT_RCU + kernel configuration parameter. o Where can I find more information on RCU? diff --git a/Documentation/RCU/rcu_dereference.txt b/Documentation/RCU/rcu_dereference.txt index b2a613f16d74..1acb26b09b48 100644 --- a/Documentation/RCU/rcu_dereference.txt +++ b/Documentation/RCU/rcu_dereference.txt @@ -25,35 +25,35 @@ o You must use one of the rcu_dereference() family of primitives for an example where the compiler can in fact deduce the exact value of the pointer, and thus cause misordering. +o You are only permitted to use rcu_dereference on pointer values. + The compiler simply knows too much about integral values to + trust it to carry dependencies through integer operations. + There are a very few exceptions, namely that you can temporarily + cast the pointer to uintptr_t in order to: + + o Set bits and clear bits down in the must-be-zero low-order + bits of that pointer. This clearly means that the pointer + must have alignment constraints, for example, this does + -not- work in general for char* pointers. + + o XOR bits to translate pointers, as is done in some + classic buddy-allocator algorithms. + + It is important to cast the value back to pointer before + doing much of anything else with it. + o Avoid cancellation when using the "+" and "-" infix arithmetic operators. For example, for a given variable "x", avoid - "(x-x)". There are similar arithmetic pitfalls from other - arithmetic operators, such as "(x*0)", "(x/(x+1))" or "(x%1)". - The compiler is within its rights to substitute zero for all of - these expressions, so that subsequent accesses no longer depend - on the rcu_dereference(), again possibly resulting in bugs due - to misordering. + "(x-(uintptr_t)x)" for char* pointers. The compiler is within its + rights to substitute zero for this sort of expression, so that + subsequent accesses no longer depend on the rcu_dereference(), + again possibly resulting in bugs due to misordering. Of course, if "p" is a pointer from rcu_dereference(), and "a" and "b" are integers that happen to be equal, the expression "p+a-b" is safe because its value still necessarily depends on the rcu_dereference(), thus maintaining proper ordering. -o Avoid all-zero operands to the bitwise "&" operator, and - similarly avoid all-ones operands to the bitwise "|" operator. - If the compiler is able to deduce the value of such operands, - it is within its rights to substitute the corresponding constant - for the bitwise operation. Once again, this causes subsequent - accesses to no longer depend on the rcu_dereference(), causing - bugs due to misordering. - - Please note that single-bit operands to bitwise "&" can also - be dangerous. At this point, the compiler knows that the - resulting value can only take on one of two possible values. - Therefore, a very small amount of additional information will - allow the compiler to deduce the exact value, which again can - result in misordering. - o If you are using RCU to protect JITed functions, so that the "()" function-invocation operator is applied to a value obtained (directly or indirectly) from rcu_dereference(), you may need to @@ -61,25 +61,6 @@ o If you are using RCU to protect JITed functions, so that the This issue arises on some systems when a newly JITed function is using the same memory that was used by an earlier JITed function. -o Do not use the results from the boolean "&&" and "||" when - dereferencing. For example, the following (rather improbable) - code is buggy: - - int *p; - int *q; - - ... - - p = rcu_dereference(gp) - q = &global_q; - q += p != &oom_p1 && p != &oom_p2; - r1 = *q; /* BUGGY!!! */ - - The reason this is buggy is that "&&" and "||" are often compiled - using branches. While weak-memory machines such as ARM or PowerPC - do order stores after such branches, they can speculate loads, - which can result in misordering bugs. - o Do not use the results from relational operators ("==", "!=", ">", ">=", "<", or "<=") when dereferencing. For example, the following (quite strange) code is buggy: diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt index b10cfe711e68..5d7759071a3e 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.txt @@ -263,6 +263,11 @@ Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes are delayed for a full grace period? Couldn't this result in rcu_barrier() returning prematurely? +The current rcu_barrier() implementation is more complex, due to the need +to avoid disturbing idle CPUs (especially on battery-powered systems) +and the need to minimally disturb non-idle CPUs in real-time systems. +However, the code above illustrates the concepts. + rcu_barrier() Summary diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index 278f6a9383b6..55918b54808b 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -276,15 +276,17 @@ o "Free-Block Circulation": Shows the number of torture structures somehow gets incremented farther than it should. Different implementations of RCU can provide implementation-specific -additional information. For example, SRCU provides the following +additional information. For example, Tree SRCU provides the following additional line: - srcu-torture: per-CPU(idx=1): 0(0,1) 1(0,1) 2(0,0) 3(0,1) + srcud-torture: Tree SRCU per-CPU(idx=0): 0(35,-21) 1(-4,24) 2(1,1) 3(-26,20) 4(28,-47) 5(-9,4) 6(-10,14) 7(-14,11) T(1,6) -This line shows the per-CPU counter state. The numbers in parentheses are -the values of the "old" and "current" counters for the corresponding CPU. -The "idx" value maps the "old" and "current" values to the underlying -array, and is useful for debugging. +This line shows the per-CPU counter state, in this case for Tree SRCU +using a dynamically allocated srcu_struct (hence "srcud-" rather than +"srcu-"). The numbers in parentheses are the values of the "old" and +"current" counters for the corresponding CPU. The "idx" value maps the +"old" and "current" values to the underlying array, and is useful for +debugging. The final "T" entry contains the totals of the counters. USAGE @@ -304,3 +306,9 @@ checked for such errors. The "rmmod" command forces a "SUCCESS", "FAILURE", or "RCU_HOTPLUG" indication to be printk()ed. The first two are self-explanatory, while the last indicates that while there were no RCU failures, CPU-hotplug problems were detected. + +However, the tools/testing/selftests/rcutorture/bin/kvm.sh script +provides better automation, including automatic failure analysis. +It assumes a qemu/kvm-enabled platform, and runs guest OSes out of initrd. +See tools/testing/selftests/rcutorture/doc/initrd.txt for instructions +on setting up such an initrd. diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 8ed6c9f6133c..df62466da4e0 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -890,6 +890,8 @@ SRCU: Critical sections Grace period Barrier srcu_read_lock_held SRCU: Initialization/cleanup + DEFINE_SRCU + DEFINE_STATIC_SRCU init_srcu_struct cleanup_srcu_struct @@ -913,7 +915,8 @@ a. Will readers need to block? If so, you need SRCU. b. What about the -rt patchset? If readers would need to block in an non-rt kernel, you need SRCU. If readers would block in a -rt kernel, but not in a non-rt kernel, SRCU is not - necessary. + necessary. (The -rt patchset turns spinlocks into sleeplocks, + hence this distinction.) c. Do you need to treat NMI handlers, hardirq handlers, and code segments with preemption disabled (whether diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index 6b71852dadc2..4ec843123cc3 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -3081,3 +3081,8 @@ 1 = /dev/osd1 Second OSD Device ... 255 = /dev/osd255 256th OSD Device + + 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT + Character devices that request a dynamic allocation of major + number will take numbers starting from 511 and downward, + once the 234-254 range is full. diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index d76ab3907e2b..b2598cc9834c 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -138,6 +138,7 @@ parameter is applicable:: PPT Parallel port support is enabled. PS2 Appropriate PS/2 support is enabled. RAM RAM disk support is enabled. + RDT Intel Resource Director Technology. S390 S390 architecture is enabled. SCSI Appropriate SCSI support is enabled. A lot of drivers have their options described inside diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 1c0a995c4856..05496622b4ef 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2233,6 +2233,17 @@ memory contents and reserves bad memory regions that are detected. + mem_encrypt= [X86-64] AMD Secure Memory Encryption (SME) control + Valid arguments: on, off + Default (depends on kernel configuration option): + on (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) + off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n) + mem_encrypt=on: Activate SME + mem_encrypt=off: Do not activate SME + + Refer to Documentation/x86/amd-memory-encryption.txt + for details on when memory encryption can be activated. + mem_sleep_default= [SUSPEND] Default system suspend mode: s2idle - Suspend-To-Idle shallow - Power-On Suspend or equivalent (if supported) @@ -2633,9 +2644,10 @@ In kernels built with CONFIG_NO_HZ_FULL=y, set the specified list of CPUs whose tick will be stopped whenever possible. The boot CPU will be forced outside - the range to maintain the timekeeping. - The CPUs in this range must also be included in the - rcu_nocbs= set. + the range to maintain the timekeeping. Any CPUs + in this list will have their RCU callbacks offloaded, + just as if they had also been called out in the + rcu_nocbs= boot parameter. noiotrap [SH] Disables trapped I/O port accesses. @@ -2696,6 +2708,8 @@ nopat [X86] Disable PAT (page attribute table extension of pagetables) support. + nopcid [X86-64] Disable the PCID cpu feature. + norandmaps Don't use address space randomization. Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space @@ -2778,7 +2792,7 @@ Allowed values are enable and disable numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA. - one of ['zone', 'node', 'default'] can be specified + 'node', 'default' can be specified This can be set from sysctl after boot. See Documentation/sysctl/vm.txt for details. @@ -3607,6 +3621,12 @@ Run specified binary instead of /init from the ramdisk, used for early userspace startup. See initrd. + rdt= [HW,X86,RDT] + Turn on/off individual RDT features. List is: + cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, mba. + E.g. to turn on cmt and turn off mba use: + rdt=cmt,!mba + reboot= [KNL] Format (x86 or x86_64): [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \ @@ -4384,6 +4404,10 @@ decrease the size and leave more room for directly mapped kernel RAM. + vmcp_cma=nn[MG] [KNL,S390] + Sets the memory size reserved for contiguous memory + allocations for the vmcp device driver. + vmhalt= [KNL,S390] Perform z/VM CP command after system halt. Format: <command> diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 7af83a92d2d6..47153e64dfb5 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -479,14 +479,6 @@ This governor exposes the following tunables: # echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate - -``min_sampling_rate`` - The minimum value of ``sampling_rate``. - - Equal to 10000 (10 ms) if :c:macro:`CONFIG_NO_HZ_COMMON` and - :c:data:`tick_nohz_active` are both set or to 20 times the value of - :c:data:`jiffies` in microseconds otherwise. - ``up_threshold`` If the estimated CPU load is above this value (in percent), the governor will set the frequency to the maximum value allowed for the policy. diff --git a/Documentation/admin-guide/pm/index.rst b/Documentation/admin-guide/pm/index.rst index 7f148f76f432..49237ac73442 100644 --- a/Documentation/admin-guide/pm/index.rst +++ b/Documentation/admin-guide/pm/index.rst @@ -5,12 +5,6 @@ Power Management .. toctree:: :maxdepth: 2 - cpufreq - intel_pstate - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` + strategies + system-wide + working-state diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 1d6249825efc..d2b6fda3d67b 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -167,35 +167,17 @@ is set. ``powersave`` ............. -Without HWP, this P-state selection algorithm generally depends on the -processor model and/or the system profile setting in the ACPI tables and there -are two variants of it. - -One of them is used with processors from the Atom line and (regardless of the -processor model) on platforms with the system profile in the ACPI tables set to -"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or -"workstation". It is also used with processors supporting the HWP feature if -that feature has not been enabled (that is, with the ``intel_pstate=no_hwp`` -argument in the kernel command line). It is similar to the algorithm +Without HWP, this P-state selection algorithm is similar to the algorithm implemented by the generic ``schedutil`` scaling governor except that the utilization metric used by it is based on numbers coming from feedback registers of the CPU. It generally selects P-states proportional to the -current CPU utilization, so it is referred to as the "proportional" algorithm. - -The second variant of the ``powersave`` P-state selection algorithm, used in all -of the other cases (generally, on processors from the Core line, so it is -referred to as the "Core" algorithm), is based on the values read from the APERF -and MPERF feedback registers and the previously requested target P-state. -It does not really take CPU utilization into account explicitly, but as a rule -it causes the CPU P-state to ramp up very quickly in response to increased -utilization which is generally desirable in server environments. - -Regardless of the variant, this algorithm is run by the driver's utilization -update callback for the given CPU when it is invoked by the CPU scheduler, but -not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this -particular case <Tuning Interface in debugfs_>`_). Like in the ``performance`` -case, the hardware configuration is not touched if the new P-state turns out to -be the same as the current one. +current CPU utilization. + +This algorithm is run by the driver's utilization update callback for the +given CPU when it is invoked by the CPU scheduler, but not more often than +every 10 ms. Like in the ``performance`` case, the hardware configuration +is not touched if the new P-state turns out to be the same as the current +one. This is the default P-state selection algorithm if the :c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option @@ -720,34 +702,7 @@ P-state is called, the ``ftrace`` filter can be set to to gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func -Tuning Interface in ``debugfs`` -------------------------------- - -The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of -processors in the active mode <powersave_>`_ is based on a `PID controller`_ -whose parameters were chosen to address a number of different use cases at the -same time. However, it still is possible to fine-tune it to a specific workload -and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is -provided for this purpose. [Note that the ``pstate_snb`` directory will be -present only if the specific P-state selection algorithm matching the interface -in it actually is in use.] - -The following files present in that directory can be used to modify the PID -controller parameters at run time: - -| ``deadband`` -| ``d_gain_pct`` -| ``i_gain_pct`` -| ``p_gain_pct`` -| ``sample_rate_ms`` -| ``setpoint`` - -Note, however, that achieving desirable results this way generally requires -expert-level understanding of the power vs performance tradeoff, so extra care -is recommended when attempting to do that. - .. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf .. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html .. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf -.. _PID controller: https://en.wikipedia.org/wiki/PID_controller diff --git a/Documentation/admin-guide/pm/sleep-states.rst b/Documentation/admin-guide/pm/sleep-states.rst new file mode 100644 index 000000000000..1e5c0f00cb2f --- /dev/null +++ b/Documentation/admin-guide/pm/sleep-states.rst @@ -0,0 +1,245 @@ +=================== +System Sleep States +=================== + +:: + + Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +Sleep states are global low-power states of the entire system in which user +space code cannot be executed and the overall system activity is significantly +reduced. + + +Sleep States That Can Be Supported +================================== + +Depending on its configuration and the capabilities of the platform it runs on, +the Linux kernel can support up to four system sleep states, includig +hibernation and up to three variants of system suspend. The sleep states that +can be supported by the kernel are listed below. + +.. _s2idle: + +Suspend-to-Idle +--------------- + +This is a generic, pure software, light-weight variant of system suspend (also +referred to as S2I or S2Idle). It allows more energy to be saved relative to +runtime idle by freezing user space, suspending the timekeeping and putting all +I/O devices into low-power states (possibly lower-power than available in the +working state), such that the processors can spend time in their deepest idle +states while the system is suspended. + +The system is woken up from this state by in-band interrupts, so theoretically +any devices that can cause interrupts to be generated in the working state can +also be set up as wakeup devices for S2Idle. + +This state can be used on platforms without support for :ref:`standby <standby>` +or :ref:`suspend-to-RAM <s2ram>`, or it can be used in addition to any of the +deeper system suspend variants to provide reduced resume latency. It is always +supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration option is set. + +.. _standby: + +Standby +------- + +This state, if supported, offers moderate, but real, energy savings, while +providing a relatively straightforward transition back to the working state. No +operating state is lost (the system core logic retains power), so the system can +go back to where it left off easily enough. + +In addition to freezing user space, suspending the timekeeping and putting all +I/O devices into low-power states, which is done for :ref:`suspend-to-idle +<s2idle>` too, nonboot CPUs are taken offline and all low-level system functions +are suspended during transitions into this state. For this reason, it should +allow more energy to be saved relative to :ref:`suspend-to-idle <s2idle>`, but +the resume latency will generally be greater than for that state. + +The set of devices that can wake up the system from this state usually is +reduced relative to :ref:`suspend-to-idle <s2idle>` and it may be necessary to +rely on the platform for setting up the wakeup functionality as appropriate. + +This state is supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration +option is set and the support for it is registered by the platform with the +core system suspend subsystem. On ACPI-based systems this state is mapped to +the S1 system state defined by ACPI. + +.. _s2ram: + +Suspend-to-RAM +-------------- + +This state (also referred to as STR or S2RAM), if supported, offers significant +energy savings as everything in the system is put into a low-power state, except +for memory, which should be placed into the self-refresh mode to retain its +contents. All of the steps carried out when entering :ref:`standby <standby>` +are also carried out during transitions to S2RAM. Additional operations may +take place depending on the platform capabilities. In particular, on ACPI-based +systems the kernel passes control to the platform firmware (BIOS) as the last +step during S2RAM transitions and that usually results in powering down some +more low-level components that are not directly controlled by the kernel. + +The state of devices and CPUs is saved and held in memory. All devices are +suspended and put into low-power states. In many cases, all peripheral buses +lose power when entering S2RAM, so devices must be able to handle the transition +back to the "on" state. + +On ACPI-based systems S2RAM requires some minimal boot-strapping code in the +platform firmware to resume the system from it. This may be the case on other +platforms too. + +The set of devices that can wake up the system from S2RAM usually is reduced +relative to :ref:`suspend-to-idle <s2idle>` and :ref:`standby <standby>` and it +may be necessary to rely on the platform for setting up the wakeup functionality +as appropriate. + +S2RAM is supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration option +is set and the support for it is registered by the platform with the core system +suspend subsystem. On ACPI-based systems it is mapped to the S3 system state +defined by ACPI. + +.. _hibernation: + +Hibernation +----------- + +This state (also referred to as Suspend-to-Disk or STD) offers the greatest +energy savings and can be used even in the absence of low-level platform support +for system suspend. However, it requires some low-level code for resuming the +system to be present for the underlying CPU architecture. + +Hibernation is significantly different from any of the system suspend variants. +It takes three system state changes to put it into hibernation and two system +state changes to resume it. + +First, when hibernation is triggered, the kernel stops all system activity and +creates a snapshot image of memory to be written into persistent storage. Next, +the system goes into a state in which the snapshot image can be saved, the image +is written out and finally the system goes into the target low-power state in +which power is cut from almost all of its hardware components, including memory, +except for a limited set of wakeup devices. + +Once the snapshot image has been written out, the system may either enter a +special low-power state (like ACPI S4), or it may simply power down itself. +Powering down means minimum power draw and it allows this mechanism to work on +any system. However, entering a special low-power state may allow additional +means of system wakeup to be used (e.g. pressing a key on the keyboard or +opening a laptop lid). + +After wakeup, control goes to the platform firmware that runs a boot loader +which boots a fresh instance of the kernel (control may also go directly to +the boot loader, depending on the system configuration, but anyway it causes +a fresh instance of the kernel to be booted). That new instance of the kernel +(referred to as the ``restore kernel``) looks for a hibernation image in +persistent storage and if one is found, it is loaded into memory. Next, all +activity in the system is stopped and the restore kernel overwrites itself with +the image contents and jumps into a special trampoline area in the original +kernel stored in the image (referred to as the ``image kernel``), which is where +the special architecture-specific low-level code is needed. Finally, the +image kernel restores the system to the pre-hibernation state and allows user +space to run again. + +Hibernation is supported if the :c:macro:`CONFIG_HIBERNATION` kernel +configuration option is set. However, this option can only be set if support +for the given CPU architecture includes the low-level code for system resume. + + +Basic ``sysfs`` Interfaces for System Suspend and Hibernation +============================================================= + +The following files located in the :file:`/sys/power/` directory can be used by +user space for sleep states control. + +``state`` + This file contains a list of strings representing sleep states supported + by the kernel. Writing one of these strings into it causes the kernel + to start a transition of the system into the sleep state represented by + that string. + + In particular, the strings "disk", "freeze" and "standby" represent the + :ref:`hibernation <hibernation>`, :ref:`suspend-to-idle <s2idle>` and + :ref:`standby <standby>` sleep states, respectively. The string "mem" + is interpreted in accordance with the contents of the ``mem_sleep`` file + described below. + + If the kernel does not support any system sleep states, this file is + not present. + +``mem_sleep`` + This file contains a list of strings representing supported system + suspend variants and allows user space to select the variant to be + associated with the "mem" string in the ``state`` file described above. + + The strings that may be present in this file are "s2idle", "shallow" + and "deep". The string "s2idle" always represents :ref:`suspend-to-idle + <s2idle>` and, by convention, "shallow" and "deep" represent + :ref:`standby <standby>` and :ref:`suspend-to-RAM <s2ram>`, + respectively. + + Writing one of the listed strings into this file causes the system + suspend variant represented by it to be associated with the "mem" string + in the ``state`` file. The string representing the suspend variant + currently associated with the "mem" string in the ``state`` file + is listed in square brackets. + + If the kernel does not support system suspend, this file is not present. + +``disk`` + This file contains a list of strings representing different operations + that can be carried out after the hibernation image has been saved. The + possible options are as follows: + + ``platform`` + Put the system into a special low-power state (e.g. ACPI S4) to + make additional wakeup options available and possibly allow the + platform firmware to take a simplified initialization path after + wakeup. + + ``shutdown`` + Power off the system. + + ``reboot`` + Reboot the system (useful for diagnostics mostly). + + ``suspend`` + Hybrid system suspend. Put the system into the suspend sleep + state selected through the ``mem_sleep`` file described above. + If the system is successfully woken up from that state, discard + the hibernation image and continue. Otherwise, use the image + to restore the previous state of the system. + + ``test_resume`` + Diagnostic operation. Load the image as though the system had + just woken up from hibernation and the currently running kernel + instance was a restore kernel and follow up with full system + resume. + + Writing one of the listed strings into this file causes the option + represented by it to be selected. + + The currently selected option is shown in square brackets which means + that the operation represented by it will be carried out after creating + and saving the image next time hibernation is triggered by writing + ``disk`` to :file:`/sys/power/state`. + + If the kernel does not support hibernation, this file is not present. + +According to the above, there are two ways to make the system go into the +:ref:`suspend-to-idle <s2idle>` state. The first one is to write "freeze" +directly to :file:`/sys/power/state`. The second one is to write "s2idle" to +:file:`/sys/power/mem_sleep` and then to write "mem" to +:file:`/sys/power/state`. Likewise, there are two ways to make the system go +into the :ref:`standby <standby>` state (the strings to write to the control +files in that case are "standby" or "shallow" and "mem", respectively) if that +state is supported by the platform. However, there is only one way to make the +system go into the :ref:`suspend-to-RAM <s2ram>` state (write "deep" into +:file:`/sys/power/mem_sleep` and "mem" into :file:`/sys/power/state`). + +The default suspend variant (ie. the one to be used without writing anything +into :file:`/sys/power/mem_sleep`) is either "deep" (on the majority of systems +supporting :ref:`suspend-to-RAM <s2ram>`) or "s2idle", but it can be overridden +by the value of the "mem_sleep_default" parameter in the kernel command line. +On some ACPI-based systems, depending on the information in the ACPI tables, the +default may be "s2idle" even if :ref:`suspend-to-RAM <s2ram>` is supported. diff --git a/Documentation/admin-guide/pm/strategies.rst b/Documentation/admin-guide/pm/strategies.rst new file mode 100644 index 000000000000..afe4d3f831fe --- /dev/null +++ b/Documentation/admin-guide/pm/strategies.rst @@ -0,0 +1,52 @@ +=========================== +Power Management Strategies +=========================== + +:: + + Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +The Linux kernel supports two major high-level power management strategies. + +One of them is based on using global low-power states of the whole system in +which user space code cannot be executed and the overall system activity is +significantly reduced, referred to as :doc:`sleep states <sleep-states>`. The +kernel puts the system into one of these states when requested by user space +and the system stays in it until a special signal is received from one of +designated devices, triggering a transition to the ``working state`` in which +user space code can run. Because sleep states are global and the whole system +is affected by the state changes, this strategy is referred to as the +:doc:`system-wide power management <system-wide>`. + +The other strategy, referred to as the :doc:`working-state power management +<working-state>`, is based on adjusting the power states of individual hardware +components of the system, as needed, in the working state. In consequence, if +this strategy is in use, the working state of the system usually does not +correspond to any particular physical configuration of it, but can be treated as +a metastate covering a range of different power states of the system in which +the individual components of it can be either ``active`` (in use) or +``inactive`` (idle). If they are active, they have to be in power states +allowing them to process data and to be accessed by software. In turn, if they +are inactive, ideally, they should be in low-power states in which they may not +be accessible. + +If all of the system components are active, the system as a whole is regarded as +"runtime active" and that situation typically corresponds to the maximum power +draw (or maximum energy usage) of it. If all of them are inactive, the system +as a whole is regarded as "runtime idle" which may be very close to a sleep +state from the physical system configuration and power draw perspective, but +then it takes much less time and effort to start executing user space code than +for the same system in a sleep state. However, transitions from sleep states +back to the working state can only be started by a limited set of devices, so +typically the system can spend much more time in a sleep state than it can be +runtime idle in one go. For this reason, systems usually use less energy in +sleep states than when they are runtime idle most of the time. + +Moreover, the two power management strategies address different usage scenarios. +Namely, if the user indicates that the system will not be in use going forward, +for example by closing its lid (if the system is a laptop), it probably should +go into a sleep state at that point. On the other hand, if the user simply goes +away from the laptop keyboard, it probably should stay in the working state and +use the working-state power management in case it becomes idle, because the user +may come back to it at any time and then may want the system to be immediately +accessible. diff --git a/Documentation/admin-guide/pm/system-wide.rst b/Documentation/admin-guide/pm/system-wide.rst new file mode 100644 index 000000000000..0c81e4c5de39 --- /dev/null +++ b/Documentation/admin-guide/pm/system-wide.rst @@ -0,0 +1,8 @@ +============================ +System-Wide Power Management +============================ + +.. toctree:: + :maxdepth: 2 + + sleep-states diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst new file mode 100644 index 000000000000..fa01bf083dfe --- /dev/null +++ b/Documentation/admin-guide/pm/working-state.rst @@ -0,0 +1,9 @@ +============================== +Working-State Power Management +============================== + +.. toctree:: + :maxdepth: 2 + + cpufreq + intel_pstate diff --git a/Documentation/arm/firmware.txt b/Documentation/arm/firmware.txt index da6713adac8a..7f175dbb427e 100644 --- a/Documentation/arm/firmware.txt +++ b/Documentation/arm/firmware.txt @@ -60,7 +60,7 @@ Example of using a firmware operation: /* some platform code, e.g. SMP initialization */ - __raw_writel(virt_to_phys(exynos4_secondary_startup), + __raw_writel(__pa_symbol(exynos4_secondary_startup), CPU1_BOOT_REG); /* Call Exynos specific smc call */ diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt index d1c97f9f51cc..dad411d635d8 100644 --- a/Documentation/arm64/cpu-feature-registers.txt +++ b/Documentation/arm64/cpu-feature-registers.txt @@ -179,6 +179,8 @@ infrastructure: | FCMA | [19-16] | y | |--------------------------------------------------| | JSCVT | [15-12] | y | + |--------------------------------------------------| + | DPB | [3-0] | y | x--------------------------------------------------x Appendix I: Example diff --git a/Documentation/atomic_bitops.txt b/Documentation/atomic_bitops.txt new file mode 100644 index 000000000000..5550bfdcce5f --- /dev/null +++ b/Documentation/atomic_bitops.txt @@ -0,0 +1,66 @@ + +On atomic bitops. + + +While our bitmap_{}() functions are non-atomic, we have a number of operations +operating on single bits in a bitmap that are atomic. + + +API +--- + +The single bit operations are: + +Non-RMW ops: + + test_bit() + +RMW atomic operations without return value: + + {set,clear,change}_bit() + clear_bit_unlock() + +RMW atomic operations with return value: + + test_and_{set,clear,change}_bit() + test_and_set_bit_lock() + +Barriers: + + smp_mb__{before,after}_atomic() + + +All RMW atomic operations have a '__' prefixed variant which is non-atomic. + + +SEMANTICS +--------- + +Non-atomic ops: + +In particular __clear_bit_unlock() suffers the same issue as atomic_set(), +which is why the generic version maps to clear_bit_unlock(), see atomic_t.txt. + + +RMW ops: + +The test_and_{}_bit() operations return the original value of the bit. + + +ORDERING +-------- + +Like with atomic_t, the rule of thumb is: + + - non-RMW operations are unordered; + + - RMW operations that have no return value are unordered; + + - RMW operations that have a return value are fully ordered. + +Except for test_and_set_bit_lock() which has ACQUIRE semantics and +clear_bit_unlock() which has RELEASE semantics. + +Since a platform only has a single means of achieving atomic operations +the same barriers as for atomic_t are used, see atomic_t.txt. + diff --git a/Documentation/atomic_t.txt b/Documentation/atomic_t.txt new file mode 100644 index 000000000000..913396ac5824 --- /dev/null +++ b/Documentation/atomic_t.txt @@ -0,0 +1,242 @@ + +On atomic types (atomic_t atomic64_t and atomic_long_t). + +The atomic type provides an interface to the architecture's means of atomic +RMW operations between CPUs (atomic operations on MMIO are not supported and +can lead to fatal traps on some platforms). + +API +--- + +The 'full' API consists of (atomic64_ and atomic_long_ prefixes omitted for +brevity): + +Non-RMW ops: + + atomic_read(), atomic_set() + atomic_read_acquire(), atomic_set_release() + + +RMW atomic operations: + +Arithmetic: + + atomic_{add,sub,inc,dec}() + atomic_{add,sub,inc,dec}_return{,_relaxed,_acquire,_release}() + atomic_fetch_{add,sub,inc,dec}{,_relaxed,_acquire,_release}() + + +Bitwise: + + atomic_{and,or,xor,andnot}() + atomic_fetch_{and,or,xor,andnot}{,_relaxed,_acquire,_release}() + + +Swap: + + atomic_xchg{,_relaxed,_acquire,_release}() + atomic_cmpxchg{,_relaxed,_acquire,_release}() + atomic_try_cmpxchg{,_relaxed,_acquire,_release}() + + +Reference count (but please see refcount_t): + + atomic_add_unless(), atomic_inc_not_zero() + atomic_sub_and_test(), atomic_dec_and_test() + + +Misc: + + atomic_inc_and_test(), atomic_add_negative() + atomic_dec_unless_positive(), atomic_inc_unless_negative() + + +Barriers: + + smp_mb__{before,after}_atomic() + + + +SEMANTICS +--------- + +Non-RMW ops: + +The non-RMW ops are (typically) regular LOADs and STOREs and are canonically +implemented using READ_ONCE(), WRITE_ONCE(), smp_load_acquire() and +smp_store_release() respectively. + +The one detail to this is that atomic_set{}() should be observable to the RMW +ops. That is: + + C atomic-set + + { + atomic_set(v, 1); + } + + P1(atomic_t *v) + { + atomic_add_unless(v, 1, 0); + } + + P2(atomic_t *v) + { + atomic_set(v, 0); + } + + exists + (v=2) + +In this case we would expect the atomic_set() from CPU1 to either happen +before the atomic_add_unless(), in which case that latter one would no-op, or +_after_ in which case we'd overwrite its result. In no case is "2" a valid +outcome. + +This is typically true on 'normal' platforms, where a regular competing STORE +will invalidate a LL/SC or fail a CMPXCHG. + +The obvious case where this is not so is when we need to implement atomic ops +with a lock: + + CPU0 CPU1 + + atomic_add_unless(v, 1, 0); + lock(); + ret = READ_ONCE(v->counter); // == 1 + atomic_set(v, 0); + if (ret != u) WRITE_ONCE(v->counter, 0); + WRITE_ONCE(v->counter, ret + 1); + unlock(); + +the typical solution is to then implement atomic_set{}() with atomic_xchg(). + + +RMW ops: + +These come in various forms: + + - plain operations without return value: atomic_{}() + + - operations which return the modified value: atomic_{}_return() + + these are limited to the arithmetic operations because those are + reversible. Bitops are irreversible and therefore the modified value + is of dubious utility. + + - operations which return the original value: atomic_fetch_{}() + + - swap operations: xchg(), cmpxchg() and try_cmpxchg() + + - misc; the special purpose operations that are commonly used and would, + given the interface, normally be implemented using (try_)cmpxchg loops but + are time critical and can, (typically) on LL/SC architectures, be more + efficiently implemented. + +All these operations are SMP atomic; that is, the operations (for a single +atomic variable) can be fully ordered and no intermediate state is lost or +visible. + + +ORDERING (go read memory-barriers.txt first) +-------- + +The rule of thumb: + + - non-RMW operations are unordered; + + - RMW operations that have no return value are unordered; + + - RMW operations that have a return value are fully ordered; + + - RMW operations that are conditional are unordered on FAILURE, + otherwise the above rules apply. + +Except of course when an operation has an explicit ordering like: + + {}_relaxed: unordered + {}_acquire: the R of the RMW (or atomic_read) is an ACQUIRE + {}_release: the W of the RMW (or atomic_set) is a RELEASE + +Where 'unordered' is against other memory locations. Address dependencies are +not defeated. + +Fully ordered primitives are ordered against everything prior and everything +subsequent. Therefore a fully ordered primitive is like having an smp_mb() +before and an smp_mb() after the primitive. + + +The barriers: + + smp_mb__{before,after}_atomic() + +only apply to the RMW ops and can be used to augment/upgrade the ordering +inherent to the used atomic op. These barriers provide a full smp_mb(). + +These helper barriers exist because architectures have varying implicit +ordering on their SMP atomic primitives. For example our TSO architectures +provide full ordered atomics and these barriers are no-ops. + +Thus: + + atomic_fetch_add(); + +is equivalent to: + + smp_mb__before_atomic(); + atomic_fetch_add_relaxed(); + smp_mb__after_atomic(); + +However the atomic_fetch_add() might be implemented more efficiently. + +Further, while something like: + + smp_mb__before_atomic(); + atomic_dec(&X); + +is a 'typical' RELEASE pattern, the barrier is strictly stronger than +a RELEASE. Similarly for something like: + + atomic_inc(&X); + smp_mb__after_atomic(); + +is an ACQUIRE pattern (though very much not typical), but again the barrier is +strictly stronger than ACQUIRE. As illustrated: + + C strong-acquire + + { + } + + P1(int *x, atomic_t *y) + { + r0 = READ_ONCE(*x); + smp_rmb(); + r1 = atomic_read(y); + } + + P2(int *x, atomic_t *y) + { + atomic_inc(y); + smp_mb__after_atomic(); + WRITE_ONCE(*x, 1); + } + + exists + (r0=1 /\ r1=0) + +This should not happen; but a hypothetical atomic_inc_acquire() -- +(void)atomic_fetch_inc_acquire() for instance -- would allow the outcome, +since then: + + P1 P2 + + t = LL.acq *y (0) + t++; + *x = 1; + r0 = *x (1) + RMB + r1 = *y (0) + SC *y, t; + +is allowed. diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt deleted file mode 100644 index 3a5477cc456e..000000000000 --- a/Documentation/blockdev/cciss.txt +++ /dev/null @@ -1,194 +0,0 @@ -This driver is for Compaq's SMART Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SA 5300 - * SA 5i - * SA 532 - * SA 5312 - * SA 641 - * SA 642 - * SA 6400 - * SA 6400 U320 Expansion Module - * SA 6i - * SA P600 - * SA P800 - * SA E400 - * SA P400i - * SA E200 - * SA E200i - * SA E500 - * SA P700m - * SA P212 - * SA P410 - * SA P410i - * SA P411 - * SA P812 - * SA P712m - * SA P711m - -Detecting drive failures: -------------------------- - -To get the status of logical volumes and to detect physical drive -failures, you can use the cciss_vol_status program found here: -http://cciss.sourceforge.net/#cciss_utils - -Device Naming: --------------- - -If nodes are not already created in the /dev/cciss directory, run as root: - -# cd /dev -# ./MAKEDEV cciss - -You need some entries in /dev for the cciss device. The MAKEDEV script -can make device nodes for you automatically. Currently the device setup -is as follows: - -Major numbers: - 104 cciss0 - 105 cciss1 - 106 cciss2 - 105 cciss3 - 108 cciss4 - 109 cciss5 - 110 cciss6 - 111 cciss7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/cciss/c0d0 Controller 0, disk 0, whole device -/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 -/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 -/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/cciss/c1d1 Controller 1, disk 1, whole device -/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 -/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 -/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 - -CCISS simple mode support -------------------------- - -The "cciss_simple_mode=1" boot parameter may be used to prevent the driver -from putting the controller into "performant" mode. The difference is that -with simple mode, each command completion requires an interrupt, while with -"performant mode" (the default, and ordinarily better performing) it is -possible to have multiple command completions indicated by a single -interrupt. - -SCSI tape drive and medium changer support ------------------------------------------- - -SCSI sequential access devices and medium changer devices are supported and -appropriate device nodes are automatically created. (e.g. -/dev/st0, /dev/st1, etc. See the "st" man page for more details.) -You must enable "SCSI tape drive support for Smart Array 5xxx" and -"SCSI support" in your kernel configuration to be able to use SCSI -tape drives with your Smart Array 5xxx controller. - -Additionally, note that the driver will engage the SCSI core at init -time if any tape drives or medium changers are detected. The driver may -also be directed to dynamically engage the SCSI core via the /proc filesystem -entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is best done via a script. - -For example: - - for x in /proc/driver/cciss/cciss[0-9]* - do - echo "engage scsi" > $x - done - -Once the SCSI core is engaged by the driver, it cannot be disengaged -(except by unloading the driver, if it happens to be linked as a module.) - -Note also that if no sequential access devices or medium changers are -detected, the SCSI core will not be engaged by the action of the above -script. - -Hot plug support for SCSI tape drives -------------------------------------- - -Hot plugging of SCSI tape drives is supported, with some caveats. -The cciss driver must be informed that changes to the SCSI bus -have been made. This may be done via the /proc filesystem. -For example: - - echo "rescan" > /proc/scsi/cciss0/1 - -This causes the driver to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the -driver to make note of any new or removed sequential access devices -or medium changers. The driver will output messages indicating what -devices have been added or removed and the controller, bus, target and -lun used to address the device. It then notifies the SCSI mid layer -of these changes. - -Note that the naming convention of the /proc filesystem entries -contains a number in addition to the driver name. (E.g. "cciss0" -instead of just "cciss" which you might expect.) - -Note: ONLY sequential access devices and medium changers are presented -as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, -physical SCSI disk drives are NOT presented to the SCSI mid layer. The -physical SCSI disk drives are controlled directly by the array controller -hardware and it is important to prevent the kernel from attempting to directly -access these devices too, as if the array controller were merely a SCSI -controller in the same way that we are allowing it to access SCSI tape drives. - -SCSI error handling for tape drives and medium changers -------------------------------------------------------- - -The linux SCSI mid layer provides an error handling protocol which -kicks into gear whenever a SCSI command fails to complete within a -certain amount of time (which can vary depending on the command). -The cciss driver participates in this protocol to some extent. The -normal protocol is a four step process. First the device is told -to abort the command. If that doesn't work, the device is reset. -If that doesn't work, the SCSI bus is reset. If that doesn't work -the host bus adapter is reset. Because the cciss driver is a block -driver as well as a SCSI driver and only the tape drives and medium -changers are presented to the SCSI mid layer, and unlike more -straightforward SCSI drivers, disk i/o continues through the block -side during the SCSI error recovery process, the cciss driver only -implements the first two of these actions, aborting the command, and -resetting the device. Additionally, most tape drives will not oblige -in aborting commands, and sometimes it appears they will not even -obey a reset command, though in most circumstances they will. In -the case that the command cannot be aborted and the device cannot be -reset, the device will be set offline. - -In the event the error handling code is triggered and a tape drive is -successfully reset or the tardy command is successfully aborted, the -tape drive may still not allow i/o to continue until some command -is issued which positions the tape to a known position. Typically you -must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) -before i/o can proceed again to a tape drive which was reset. - -There is a cciss_tape_cmds module parameter which can be used to make cciss -allocate more commands for use by tape drives. Ordinarily only a few commands -(6) are allocated for tape drives because tape drives are slow and -infrequently used and the primary purpose of Smart Array controllers is to -act as a RAID controller for disk drives, so the vast majority of commands -are allocated for disk devices. However, if you have more than a few tape -drives attached to a smart array, the default number of commands may not be -enough (for example, if you have 8 tape drives, you could only rewind 6 -at one time with the default number of commands.) The cciss_tape_cmds module -parameter allows more commands (up to 16 more) to be allocated for use by -tape drives. For example: - - insmod cciss.ko cciss_tape_cmds=16 - -Or, as a kernel boot parameter passed in via grub: cciss.cciss_tape_cmds=8 diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 4fced8a21307..257e65714c6a 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -168,6 +168,7 @@ max_comp_streams RW the number of possible concurrent compress operations comp_algorithm RW show and change the compression algorithm compact WO trigger memory compaction debug_stat RO this file is used for zram debugging purposes +backing_dev RW set up backend storage for zram to write out User space is advised to use the following files to read the device statistics. @@ -231,5 +232,15 @@ line of text and contains the following stats separated by whitespace: resets the disksize to zero. You must set the disksize again before reusing the device. +* Optional Feature + += writeback + +With incompressible pages, there is no memory saving with zram. +Instead, with CONFIG_ZRAM_WRITEBACK, zram can write incompressible page +to backing storage rather than keeping it in memory. +User should set up backing device via /sys/block/zramX/backing_dev +before disksize setting. + Nitin Gupta ngupta@vflare.org diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index bde177103567..dc44785dc0fa 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -18,7 +18,9 @@ v1 is available under Documentation/cgroup-v1/. 1-2. What is cgroup? 2. Basic Operations 2-1. Mounting - 2-2. Organizing Processes + 2-2. Organizing Processes and Threads + 2-2-1. Processes + 2-2-2. Threads 2-3. [Un]populated Notification 2-4. Controlling Controllers 2-4-1. Enabling and Disabling @@ -167,8 +169,11 @@ cgroup v2 currently supports the following mount options. Delegation section for details. -Organizing Processes --------------------- +Organizing Processes and Threads +-------------------------------- + +Processes +~~~~~~~~~ Initially, only the root cgroup exists to which all processes belong. A child cgroup can be created by creating a sub-directory:: @@ -219,6 +224,105 @@ is removed subsequently, " (deleted)" is appended to the path:: 0::/test-cgroup/test-cgroup-nested (deleted) +Threads +~~~~~~~ + +cgroup v2 supports thread granularity for a subset of controllers to +support use cases requiring hierarchical resource distribution across +the threads of a group of processes. By default, all threads of a +process belong to the same cgroup, which also serves as the resource +domain to host resource consumptions which are not specific to a +process or thread. The thread mode allows threads to be spread across +a subtree while still maintaining the common resource domain for them. + +Controllers which support thread mode are called threaded controllers. +The ones which don't are called domain controllers. + +Marking a cgroup threaded makes it join the resource domain of its +parent as a threaded cgroup. The parent may be another threaded +cgroup whose resource domain is further up in the hierarchy. The root +of a threaded subtree, that is, the nearest ancestor which is not +threaded, is called threaded domain or thread root interchangeably and +serves as the resource domain for the entire subtree. + +Inside a threaded subtree, threads of a process can be put in +different cgroups and are not subject to the no internal process +constraint - threaded controllers can be enabled on non-leaf cgroups +whether they have threads in them or not. + +As the threaded domain cgroup hosts all the domain resource +consumptions of the subtree, it is considered to have internal +resource consumptions whether there are processes in it or not and +can't have populated child cgroups which aren't threaded. Because the +root cgroup is not subject to no internal process constraint, it can +serve both as a threaded domain and a parent to domain cgroups. + +The current operation mode or type of the cgroup is shown in the +"cgroup.type" file which indicates whether the cgroup is a normal +domain, a domain which is serving as the domain of a threaded subtree, +or a threaded cgroup. + +On creation, a cgroup is always a domain cgroup and can be made +threaded by writing "threaded" to the "cgroup.type" file. The +operation is single direction:: + + # echo threaded > cgroup.type + +Once threaded, the cgroup can't be made a domain again. To enable the +thread mode, the following conditions must be met. + +- As the cgroup will join the parent's resource domain. The parent + must either be a valid (threaded) domain or a threaded cgroup. + +- When the parent is an unthreaded domain, it must not have any domain + controllers enabled or populated domain children. The root is + exempt from this requirement. + +Topology-wise, a cgroup can be in an invalid state. Please consider +the following toplogy:: + + A (threaded domain) - B (threaded) - C (domain, just created) + +C is created as a domain but isn't connected to a parent which can +host child domains. C can't be used until it is turned into a +threaded cgroup. "cgroup.type" file will report "domain (invalid)" in +these cases. Operations which fail due to invalid topology use +EOPNOTSUPP as the errno. + +A domain cgroup is turned into a threaded domain when one of its child +cgroup becomes threaded or threaded controllers are enabled in the +"cgroup.subtree_control" file while there are processes in the cgroup. +A threaded domain reverts to a normal domain when the conditions +clear. + +When read, "cgroup.threads" contains the list of the thread IDs of all +threads in the cgroup. Except that the operations are per-thread +instead of per-process, "cgroup.threads" has the same format and +behaves the same way as "cgroup.procs". While "cgroup.threads" can be +written to in any cgroup, as it can only move threads inside the same +threaded domain, its operations are confined inside each threaded +subtree. + +The threaded domain cgroup serves as the resource domain for the whole +subtree, and, while the threads can be scattered across the subtree, +all the processes are considered to be in the threaded domain cgroup. +"cgroup.procs" in a threaded domain cgroup contains the PIDs of all +processes in the subtree and is not readable in the subtree proper. +However, "cgroup.procs" can be written to from anywhere in the subtree +to migrate all threads of the matching process to the cgroup. + +Only threaded controllers can be enabled in a threaded subtree. When +a threaded controller is enabled inside a threaded subtree, it only +accounts for and controls resource consumptions associated with the +threads in the cgroup and its descendants. All consumptions which +aren't tied to a specific thread belong to the threaded domain cgroup. + +Because a threaded subtree is exempt from no internal process +constraint, a threaded controller must be able to handle competition +between threads in a non-leaf cgroup and its child cgroups. Each +threaded controller defines how such competitions are handled. + + [Un]populated Notification -------------------------- @@ -302,15 +406,15 @@ disabled if one or more children have it enabled. No Internal Process Constraint ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Non-root cgroups can only distribute resources to their children when -they don't have any processes of their own. In other words, only -cgroups which don't contain any processes can have controllers enabled -in their "cgroup.subtree_control" files. +Non-root cgroups can distribute domain resources to their children +only when they don't have any processes of their own. In other words, +only domain cgroups which don't contain any processes can have domain +controllers enabled in their "cgroup.subtree_control" files. -This guarantees that, when a controller is looking at the part of the -hierarchy which has it enabled, processes are always only on the -leaves. This rules out situations where child cgroups compete against -internal processes of the parent. +This guarantees that, when a domain controller is looking at the part +of the hierarchy which has it enabled, processes are always only on +the leaves. This rules out situations where child cgroups compete +against internal processes of the parent. The root cgroup is exempt from this restriction. Root contains processes and anonymous resource consumption which can't be associated @@ -334,10 +438,10 @@ Model of Delegation ~~~~~~~~~~~~~~~~~~~ A cgroup can be delegated in two ways. First, to a less privileged -user by granting write access of the directory and its "cgroup.procs" -and "cgroup.subtree_control" files to the user. Second, if the -"nsdelegate" mount option is set, automatically to a cgroup namespace -on namespace creation. +user by granting write access of the directory and its "cgroup.procs", +"cgroup.threads" and "cgroup.subtree_control" files to the user. +Second, if the "nsdelegate" mount option is set, automatically to a +cgroup namespace on namespace creation. Because the resource control interface files in a given directory control the distribution of the parent's resources, the delegatee @@ -644,6 +748,29 @@ Core Interface Files All cgroup core files are prefixed with "cgroup." + cgroup.type + + A read-write single value file which exists on non-root + cgroups. + + When read, it indicates the current type of the cgroup, which + can be one of the following values. + + - "domain" : A normal valid domain cgroup. + + - "domain threaded" : A threaded domain cgroup which is + serving as the root of a threaded subtree. + + - "domain invalid" : A cgroup which is in an invalid state. + It can't be populated or have controllers enabled. It may + be allowed to become a threaded cgroup. + + - "threaded" : A threaded cgroup which is a member of a + threaded subtree. + + A cgroup can be turned into a threaded cgroup by writing + "threaded" to this file. + cgroup.procs A read-write new-line separated values file which exists on all cgroups. @@ -658,9 +785,6 @@ All cgroup core files are prefixed with "cgroup." the PID to the cgroup. The writer should match all of the following conditions. - - Its euid is either root or must match either uid or suid of - the target process. - - It must have write access to the "cgroup.procs" file. - It must have write access to the "cgroup.procs" file of the @@ -669,6 +793,35 @@ All cgroup core files are prefixed with "cgroup." When delegating a sub-hierarchy, write access to this file should be granted along with the containing directory. + In a threaded cgroup, reading this file fails with EOPNOTSUPP + as all the processes belong to the thread root. Writing is + supported and moves every thread of the process to the cgroup. + + cgroup.threads + A read-write new-line separated values file which exists on + all cgroups. + + When read, it lists the TIDs of all threads which belong to + the cgroup one-per-line. The TIDs are not ordered and the + same TID may show up more than once if the thread got moved to + another cgroup and then back or the TID got recycled while + reading. + + A TID can be written to migrate the thread associated with the + TID to the cgroup. The writer should match all of the + following conditions. + + - It must have write access to the "cgroup.threads" file. + + - The cgroup that the thread is currently in must be in the + same resource domain as the destination cgroup. + + - It must have write access to the "cgroup.procs" file of the + common ancestor of the source and destination cgroups. + + When delegating a sub-hierarchy, write access to this file + should be granted along with the containing directory. + cgroup.controllers A read-only space separated values file which exists on all cgroups. @@ -701,6 +854,38 @@ All cgroup core files are prefixed with "cgroup." 1 if the cgroup or its descendants contains any live processes; otherwise, 0. + cgroup.max.descendants + A read-write single value files. The default is "max". + + Maximum allowed number of descent cgroups. + If the actual number of descendants is equal or larger, + an attempt to create a new cgroup in the hierarchy will fail. + + cgroup.max.depth + A read-write single value files. The default is "max". + + Maximum allowed descent depth below the current cgroup. + If the actual descent depth is equal or larger, + an attempt to create a new child cgroup will fail. + + cgroup.stat + A read-only flat-keyed file with the following entries: + + nr_descendants + Total number of visible descendant cgroups. + + nr_dying_descendants + Total number of dying descendant cgroups. A cgroup becomes + dying after being deleted by a user. The cgroup will remain + in dying state for some time undefined time (which can depend + on system load) before being completely destroyed. + + A process can't enter a dying cgroup under any circumstances, + a dying cgroup can't revive. + + A dying cgroup can consume system resources not exceeding + limits, which were active at the moment of cgroup deletion. + Controllers =========== diff --git a/Documentation/conf.py b/Documentation/conf.py index 71b032bb44fd..f9054ab60cb1 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -29,7 +29,7 @@ from load_config import loadConfig # -- General configuration ------------------------------------------------ # If your documentation needs a minimal Sphinx version, state it here. -needs_sphinx = '1.2' +needs_sphinx = '1.3' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom @@ -344,8 +344,8 @@ if major == 1 and minor > 3: if major == 1 and minor <= 4: latex_elements['preamble'] += '\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}' elif major == 1 and (minor > 5 or (minor == 5 and patch >= 3)): - latex_elements['sphinxsetup'] = 'hmargin=0.5in, vmargin=0.5in' - + latex_elements['sphinxsetup'] = 'hmargin=0.5in, vmargin=1in' + latex_elements['preamble'] += '\\fvset{fontsize=auto}\n' # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, diff --git a/Documentation/core-api/genalloc.rst b/Documentation/core-api/genalloc.rst new file mode 100644 index 000000000000..6b38a39fab24 --- /dev/null +++ b/Documentation/core-api/genalloc.rst @@ -0,0 +1,144 @@ +The genalloc/genpool subsystem +============================== + +There are a number of memory-allocation subsystems in the kernel, each +aimed at a specific need. Sometimes, however, a kernel developer needs to +implement a new allocator for a specific range of special-purpose memory; +often that memory is located on a device somewhere. The author of the +driver for that device can certainly write a little allocator to get the +job done, but that is the way to fill the kernel with dozens of poorly +tested allocators. Back in 2005, Jes Sorensen lifted one of those +allocators from the sym53c8xx_2 driver and posted_ it as a generic module +for the creation of ad hoc memory allocators. This code was merged +for the 2.6.13 release; it has been modified considerably since then. + +.. _posted: https://lwn.net/Articles/125842/ + +Code using this allocator should include <linux/genalloc.h>. The action +begins with the creation of a pool using one of: + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_create + +.. kernel-doc:: lib/genalloc.c + :functions: devm_gen_pool_create + +A call to :c:func:`gen_pool_create` will create a pool. The granularity of +allocations is set with min_alloc_order; it is a log-base-2 number like +those used by the page allocator, but it refers to bytes rather than pages. +So, if min_alloc_order is passed as 3, then all allocations will be a +multiple of eight bytes. Increasing min_alloc_order decreases the memory +required to track the memory in the pool. The nid parameter specifies +which NUMA node should be used for the allocation of the housekeeping +structures; it can be -1 if the caller doesn't care. + +The "managed" interface :c:func:`devm_gen_pool_create` ties the pool to a +specific device. Among other things, it will automatically clean up the +pool when the given device is destroyed. + +A pool is shut down with: + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_destroy + +It's worth noting that, if there are still allocations outstanding from the +given pool, this function will take the rather extreme step of invoking +BUG(), crashing the entire system. You have been warned. + +A freshly created pool has no memory to allocate. It is fairly useless in +that state, so one of the first orders of business is usually to add memory +to the pool. That can be done with one of: + +.. kernel-doc:: include/linux/genalloc.h + :functions: gen_pool_add + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_add_virt + +A call to :c:func:`gen_pool_add` will place the size bytes of memory +starting at addr (in the kernel's virtual address space) into the given +pool, once again using nid as the node ID for ancillary memory allocations. +The :c:func:`gen_pool_add_virt` variant associates an explicit physical +address with the memory; this is only necessary if the pool will be used +for DMA allocations. + +The functions for allocating memory from the pool (and putting it back) +are: + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_alloc + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_dma_alloc + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_free + +As one would expect, :c:func:`gen_pool_alloc` will allocate size< bytes +from the given pool. The :c:func:`gen_pool_dma_alloc` variant allocates +memory for use with DMA operations, returning the associated physical +address in the space pointed to by dma. This will only work if the memory +was added with :c:func:`gen_pool_add_virt`. Note that this function +departs from the usual genpool pattern of using unsigned long values to +represent kernel addresses; it returns a void * instead. + +That all seems relatively simple; indeed, some developers clearly found it +to be too simple. After all, the interface above provides no control over +how the allocation functions choose which specific piece of memory to +return. If that sort of control is needed, the following functions will be +of interest: + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_alloc_algo + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_set_algo + +Allocations with :c:func:`gen_pool_alloc_algo` specify an algorithm to be +used to choose the memory to be allocated; the default algorithm can be set +with :c:func:`gen_pool_set_algo`. The data value is passed to the +algorithm; most ignore it, but it is occasionally needed. One can, +naturally, write a special-purpose algorithm, but there is a fair set +already available: + +- gen_pool_first_fit is a simple first-fit allocator; this is the default + algorithm if none other has been specified. + +- gen_pool_first_fit_align forces the allocation to have a specific + alignment (passed via data in a genpool_data_align structure). + +- gen_pool_first_fit_order_align aligns the allocation to the order of the + size. A 60-byte allocation will thus be 64-byte aligned, for example. + +- gen_pool_best_fit, as one would expect, is a simple best-fit allocator. + +- gen_pool_fixed_alloc allocates at a specific offset (passed in a + genpool_data_fixed structure via the data parameter) within the pool. + If the indicated memory is not available the allocation fails. + +There is a handful of other functions, mostly for purposes like querying +the space available in the pool or iterating through chunks of memory. +Most users, however, should not need much beyond what has been described +above. With luck, wider awareness of this module will help to prevent the +writing of special-purpose memory allocators in the future. + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_virt_to_phys + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_for_each_chunk + +.. kernel-doc:: lib/genalloc.c + :functions: addr_in_gen_pool + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_avail + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_size + +.. kernel-doc:: lib/genalloc.c + :functions: gen_pool_get + +.. kernel-doc:: lib/genalloc.c + :functions: of_gen_pool_get diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 0606be3a3111..d5bbe035316d 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -20,6 +20,7 @@ Core utilities genericirq flexible-arrays librs + genalloc Interfaces for kernel debugging =============================== diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 17b00914c6ab..8282099e0cbf 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -344,3 +344,52 @@ codecs, and devices with strict requirements for interface clocking. .. kernel-doc:: include/linux/clk.h :internal: + +Synchronization Primitives +========================== + +Read-Copy Update (RCU) +---------------------- + +.. kernel-doc:: include/linux/rcupdate.h + :external: + +.. kernel-doc:: include/linux/rcupdate_wait.h + :external: + +.. kernel-doc:: include/linux/rcutree.h + :external: + +.. kernel-doc:: kernel/rcu/tree.c + :external: + +.. kernel-doc:: kernel/rcu/tree_plugin.h + :external: + +.. kernel-doc:: kernel/rcu/tree_exp.h + :external: + +.. kernel-doc:: kernel/rcu/update.c + :external: + +.. kernel-doc:: include/linux/srcu.h + :external: + +.. kernel-doc:: kernel/rcu/srcutree.c + :external: + +.. kernel-doc:: include/linux/rculist_bl.h + :external: + +.. kernel-doc:: include/linux/rculist.h + :external: + +.. kernel-doc:: include/linux/rculist_nulls.h + :external: + +.. kernel-doc:: include/linux/rcu_sync.h + :external: + +.. kernel-doc:: kernel/rcu/sync.c + :external: + diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst index ffdec94fbca1..3943b5bfa8cf 100644 --- a/Documentation/core-api/workqueue.rst +++ b/Documentation/core-api/workqueue.rst @@ -243,11 +243,15 @@ throttling the number of active work items, specifying '0' is recommended. Some users depend on the strict execution ordering of ST wq. The -combination of ``@max_active`` of 1 and ``WQ_UNBOUND`` is used to -achieve this behavior. Work items on such wq are always queued to the -unbound worker-pools and only one work item can be active at any given +combination of ``@max_active`` of 1 and ``WQ_UNBOUND`` used to +achieve this behavior. Work items on such wq were always queued to the +unbound worker-pools and only one work item could be active at any given time thus achieving the same ordering property as ST wq. +In the current implementation the above configuration only guarantees +ST behavior within a given NUMA node. Instead alloc_ordered_queue should +be used to achieve system wide ST behavior. + Example Execution Scenarios =========================== diff --git a/Documentation/dev-tools/gdb-kernel-debugging.rst b/Documentation/dev-tools/gdb-kernel-debugging.rst index 5e93c9bc6619..19df79286f00 100644 --- a/Documentation/dev-tools/gdb-kernel-debugging.rst +++ b/Documentation/dev-tools/gdb-kernel-debugging.rst @@ -31,11 +31,13 @@ Setup CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports CONFIG_FRAME_POINTER, keep it enabled. -- Install that kernel on the guest. +- Install that kernel on the guest, turn off KASLR if necessary by adding + "nokaslr" to the kernel command line. Alternatively, QEMU allows to boot the kernel directly using -kernel, -append, -initrd command line switches. This is generally only useful if you do not depend on modules. See QEMU documentation for more details on - this mode. + this mode. In this case, you should build the kernel with + CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR. - Enable the gdb stub of QEMU/KVM, either diff --git a/Documentation/dev-tools/kgdb.rst b/Documentation/dev-tools/kgdb.rst index 75273203a35a..d38be58f872a 100644 --- a/Documentation/dev-tools/kgdb.rst +++ b/Documentation/dev-tools/kgdb.rst @@ -348,6 +348,15 @@ default behavior is always set to 0. - ``echo 1 > /sys/module/debug_core/parameters/kgdbreboot`` - Enter the debugger on reboot notify. +Kernel parameter: ``nokaslr`` +----------------------------- + +If the architecture that you are using enable KASLR by default, +you should consider turning it off. KASLR randomizes the +virtual address where the kernel image is mapped and confuse +gdb which resolve kernel symbol address from symbol table +of vmlinux. + Using kdb ========= @@ -358,7 +367,7 @@ This is a quick example of how to use kdb. 1. Configure kgdboc at boot using kernel parameters:: - console=ttyS0,115200 kgdboc=ttyS0,115200 + console=ttyS0,115200 kgdboc=ttyS0,115200 nokaslr OR diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index e926aea1147d..68301b77e854 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -108,6 +108,5 @@ Example: frame-number = <1> interrupts = <0 15 0x8>; reg = <0xf0003000 0x1000>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index fcbae6a5e6c1..15ac8e8dcfdf 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -34,8 +34,8 @@ its hardware characteristcs. - Embedded Trace Macrocell (version 4.x): "arm,coresight-etm4x", "arm,primecell"; - - Qualcomm Configurable Replicator (version 1.x): - "qcom,coresight-replicator1x", "arm,primecell"; + - Coresight programmable Replicator : + "arm,coresight-dynamic-replicator", "arm,primecell"; - System Trace Macrocell: "arm,coresight-stm", "arm,primecell"; [1] diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt index 171d02cadea4..29cdbae6c5ac 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt @@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cpm_pinctrl 0 0 32>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 61c8b4620415..13611a8199bb 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -9,9 +9,11 @@ Required properties: - compatible : should be one of "apm,potenza-pmu" "arm,armv8-pmuv3" + "arm,cortex-a73-pmu" "arm,cortex-a72-pmu" "arm,cortex-a57-pmu" "arm,cortex-a53-pmu" + "arm,cortex-a35-pmu" "arm,cortex-a17-pmu" "arm,cortex-a15-pmu" "arm,cortex-a12-pmu" diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt new file mode 100644 index 000000000000..d2aa696b161b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt @@ -0,0 +1,51 @@ +MediaTek Serial ATA controller + +Required properties: + - compatible : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci". + When using "mediatek,mtk-ahci" compatible strings, you + need SoC specific ones in addition, one of: + - "mediatek,mt7622-ahci" + - reg : Physical base addresses and length of register sets. + - interrupts : Interrupt associated with the SATA device. + - interrupt-names : Associated name must be: "hostc". + - clocks : A list of phandle and clock specifier pairs, one for each + entry in clock-names. + - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm". + - phys : A phandle and PHY specifier pair for the PHY port. + - phy-names : Associated name must be: "sata-phy". + - ports-implemented : See ./ahci-platform.txt for details. + +Optional properties: + - power-domains : A phandle and power domain specifier pair to the power + domain which is responsible for collapsing and restoring + power to the peripheral. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Associated names must be: "axi", "sw", "reg". + - mediatek,phy-mode : A phandle to the system controller, used to enable + SATA function. + +Example: + + sata: sata@1a200000 { + compatible = "mediatek,mt7622-ahci", + "mediatek,mtk-ahci"; + reg = <0 0x1a200000 0 0x1100>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&u3port1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + }; diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt index a668f0e7d001..02e690a675db 100644 --- a/Documentation/devicetree/bindings/ata/apm-xgene.txt +++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt @@ -57,7 +57,6 @@ Example: <0x0 0x1f227000 0x0 0x1000>; interrupts = <0x0 0x87 0x4>; dma-coherent; - status = "ok"; clocks = <&sataclk 0>; phys = <&phy2 0>; phy-names = "sata-phy"; @@ -72,7 +71,6 @@ Example: <0x0 0x1f237000 0x0 0x1000>; interrupts = <0x0 0x88 0x4>; dma-coherent; - status = "ok"; clocks = <&sataclk 0>; phys = <&phy3 0>; phy-names = "sata-phy"; diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt index e38d73414b0d..f1172f00188a 100644 --- a/Documentation/devicetree/bindings/ata/imx-pata.txt +++ b/Documentation/devicetree/bindings/ata/imx-pata.txt @@ -13,5 +13,4 @@ Example: reg = <0x83fe0000 0x4000>; interrupts = <70>; clocks = <&clks 161>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt index fa6cde41b460..f2ab7fd013bd 100644 --- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown: }; devbus-bootcs { - status = "okay"; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; /* NOR */ @@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown: pcie-controller { compatible = "marvell,armada-xp-pcie"; - status = "okay"; device_type = "pci"; #address-cells = <3>; @@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown: pcie@1,0 { /* Port 0, Lane 0 */ - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt index 83b0e54f727c..3e21eb822811 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt @@ -84,7 +84,6 @@ gmi@70090000 { reset-names = "gmi"; ranges = <4 0 0xd0000000 0xfffffff>; - status = "okay"; bus@4,0 { compatible = "simple-bus"; @@ -121,7 +120,6 @@ gmi@70090000 { reset-names = "gmi"; ranges = <4 0 0xd0000000 0xfffffff>; - status = "okay"; can@4,0 { reg = <4 0 0x100>; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt index 7ff13be1750b..3108d03802ee 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt @@ -33,7 +33,6 @@ Example: #size-cells = <1>; ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; - status = "disabled"; child1 { ... diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index dee3f5d9df26..e3b13ea7d2ae 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -5,9 +5,31 @@ The chosen node does not represent a real device, but serves as a place for passing data between firmware and the operating system, like boot arguments. Data in the chosen node does not represent the hardware. +The following properties are recognized: -stdout-path property --------------------- + +kaslr-seed +----------- + +This property is used when booting with CONFIG_RANDOMIZE_BASE as the +entropy used to randomize the kernel image base address location. Since +it is used directly, this value is intended only for KASLR, and should +not be used for other purposes (as it may leak information about KASLR +offsets). It is parsed as a u64 value, e.g. + +/ { + chosen { + kaslr-seed = <0xfeedbeef 0xc0def00d>; + }; +}; + +Note that if this property is set from UEFI (or a bootloader in EFI +mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by +the Linux EFI stub (which will populate the property itself, using +EFI_RNG_PROTOCOL). + +stdout-path +----------- Device trees may specify the device to be used for boot console output with a stdout-path property under /chosen, as described in the Devicetree diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt index 62e67e883e76..b3205b21c9d0 100644 --- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt +++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt @@ -102,7 +102,6 @@ uart4: serial@80010000 { reg = <0x80010000 0x4000>; clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>; interrupts = <19>; - status = "disabled"; }; Clock consumer with only one, _AHB_ sink. diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index a55d31b48d6e..faa6d8ac5834 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated interrupts = <0 90 1>; clocks = <&clkc_AO CLKID_AO_UART1>; resets = <&clkc_AO RESET_AO_UART1>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index a09d627b5508..924040769186 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock reg = <0xc81004c0 0x14>; interrupts = <0 90 1>; clocks = <&clkc CLKID_CLK81>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 606da38c0959..207682647d33 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock reg = <0xc81004c0 0x14>; interrupts = <0 90 1>; clocks = <&clkc CLKID_CLK81>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt index 5286e260fcae..8e5a7d868557 100644 --- a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt +++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt @@ -46,7 +46,6 @@ Device tree example: uart@3e002000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 1dc80f8811fe..fe885abc9cb4 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart0_bus>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt index cc9b86c35758..0035a7ecaf20 100644 --- a/Documentation/devicetree/bindings/clock/hi3660-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -38,5 +38,4 @@ Examples: clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt index 7894a64887cb..4733e58e491b 100644 --- a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt +++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt @@ -27,5 +27,4 @@ Examples: interrupts = <0 49 4>; clocks = <&clock HIX5HD2_FIXED_83M>; clock-names = "apb_pclk"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt index c3b0db437c48..806f63d628bd 100644 --- a/Documentation/devicetree/bindings/clock/imx21-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt @@ -24,5 +24,4 @@ Examples: clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, <&clks IMX21_CLK_PER1>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt index 5083c0b834b2..8385348d3bd9 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -67,5 +67,4 @@ auart0: serial@8006c000 { reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt index ba6b312ff8a5..f8135ea9ca4e 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -157,5 +157,4 @@ uart1: serial@43f90000 { interrupts = <45>; clocks = <&clks 79>, <&clks 50>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt index cc05de9ec393..4c95c048d3b2 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt @@ -24,5 +24,4 @@ Examples: clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt index e6587af62ff0..d84a37d2885f 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -90,5 +90,4 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; clocks = <&clks 45>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt index 8163d565f697..0a291090e562 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt @@ -87,5 +87,4 @@ uart1: serial@43f90000 { interrupts = <45>; clocks = <&clks 10>, <&clks 30>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index cadc4d29ada6..a24ca9e582d2 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -25,5 +25,4 @@ can1: can@53fc8000 { interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 9252912a5b0e..aa0a4d423ef5 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -27,5 +27,4 @@ uart1: serial@02020000 { interrupts = <0 26 0x04>; clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt deleted file mode 100644 index 52b457c23eed..000000000000 --- a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt +++ /dev/null @@ -1,83 +0,0 @@ -Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC - -Required properties: -- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. -- clock-names: Should contain the following: - "cpu" - The multiplexer for clock input of CPU cluster. - "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock - source (usually MAINPLL) when the original CPU PLL is under - transition and not stable yet. - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for - generic clock consumer properties. -- proc-supply: Regulator for Vproc of CPU cluster. - -Optional properties: -- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver - needs to do "voltage tracking" to step by step scale up/down Vproc and - Vsram to fit SoC specific needs. When absent, the voltage scaling - flow is handled by hardware, hence no software "voltage tracking" is - needed. - -Example: --------- - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x000>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA53SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x001>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA53SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - cpu2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - cpu3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, - <&apmixedsys CLK_APMIXED_MAINPLL>; - clock-names = "cpu", "intermediate"; - }; - - &cpu0 { - proc-supply = <&mt6397_vpca15_reg>; - }; - - &cpu1 { - proc-supply = <&mt6397_vpca15_reg>; - }; - - &cpu2 { - proc-supply = <&da9211_vcpu_reg>; - sram-supply = <&mt6397_vsramca7_reg>; - }; - - &cpu3 { - proc-supply = <&da9211_vcpu_reg>; - sram-supply = <&mt6397_vsramca7_reg>; - }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt index 63f9d8277d48..dff236f524a7 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -66,7 +66,6 @@ clock@70110000 { #clock-cells = <0>; clock-output-names = "dfllCPU_out"; vdd-cpu-supply = <&vdd_cpu>; - status = "okay"; nvidia,sample-rate = <12500>; nvidia,droop-ctrl = <0x00000f00>; diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt index 4b4a9024bd99..8f67239411fe 100644 --- a/Documentation/devicetree/bindings/clock/pxa-clock.txt +++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt @@ -12,5 +12,4 @@ Examples: pxa2xx_clks: pxa2xx_clks@41300004 { compatible = "marvell,pxa-clocks"; #clock-cells = <1>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 0cd894f987a3..707a686d8d3e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -81,5 +81,4 @@ Examples dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg 310>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt index e4cdaf1cb333..7cc4c0330b53 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt @@ -44,5 +44,4 @@ Examples interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; power-domains = <&cpg_clocks>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb51a33a1fbf..bb5d942075fb 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -50,5 +50,4 @@ Examples clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt index 822505e715ae..2632d3f13004 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock interrupts = <1 23 3 4>, <1 23 4 4>; clock-names = "uart", "clk_uart_baud2"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt index 2b430960ba47..21a8c23e658f 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, <&clocks SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt index e67bb05478af..985c0f574e9a 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud3"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, <&clocks SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt index fa171dc4bd3c..872ee8e0f041 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt @@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud3"; clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>, <&clock SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt index effd9401c133..15b48e20a061 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt @@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud1"; clocks = <&clocks UART0>, <&clocks UART0>, <&clocks SCLK_UART0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index 28b28309f535..a6c4ef343b44 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -12,7 +12,11 @@ generators can be found in [1]. ==I2C device node== Required properties: -- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}". +- compatible: shall be one of the following: + "silabs,si5351a" - Si5351a, QFN20 package + "silabs,si5351a-msop" - Si5351a, MSOP10 package + "silabs,si5351b" - Si5351b, QFN20 package + "silabs,si5351c" - Si5351c, QFN20 package - reg: i2c device address, shall be 0x60 or 0x61. - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt index 1e884c40ab50..4e59dc6b1778 100644 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt @@ -14,10 +14,9 @@ Required properties: - compatible: Must be "ti,k2g-sci-clk" - #clock-cells: Shall be 2. In clock consumers, this cell represents the device ID and clock ID - exposed by the PM firmware. The assignments can be found in the header - files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and - <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> - is the SoC involved, for example 'k2g'. + exposed by the PM firmware. The list of valid values for the device IDs + and clocks IDs for 66AK2G SoC are documented at + http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data Examples: -------- diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt index 585e8c191f50..10f7047755f3 100644 --- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -81,13 +81,11 @@ atl: atl@4843c000 { <&atl_clkin2_ck>, <&atl_clkin3_ck>; clocks = <&atl_gfclk_mux>; clock-names = "fck"; - status = "disabled"; }; #include <dt-bindings/clk/ti-dra7-atl.h> &atl { - status = "okay"; atl2 { bws = <DRA7_ATL_WS_MCASP2_FSX>; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt index 750442b65505..e85ecb510d56 100644 --- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -31,5 +31,4 @@ uart0: serial@0x09405000 { reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&lsp1clk ZX296702_UART0_PCLK>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt index 4ad703808407..3a46bf0b2540 100644 --- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt @@ -34,5 +34,4 @@ usbphy0:usb-phy0 { #phy-cells = <0>; clocks = <&topclk USB20_PHY_CLK>; clock-names = "phyclk"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt new file mode 100644 index 000000000000..f6403089edcf --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -0,0 +1,247 @@ +Binding for MediaTek's CPUFreq driver +===================================== + +Required properties: +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. +- clock-names: Should contain the following: + "cpu" - The multiplexer for clock input of CPU cluster. + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock + source (usually MAINPLL) when the original CPU PLL is under + transition and not stable yet. + Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for + generic clock consumer properties. +- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt + for detail. +- proc-supply: Regulator for Vproc of CPU cluster. + +Optional properties: +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver + needs to do "voltage tracking" to step by step scale up/down Vproc and + Vsram to fit SoC specific needs. When absent, the voltage scaling + flow is handled by hardware, hence no software "voltage tracking" is + needed. +- #cooling-cells: +- cooling-min-level: +- cooling-max-level: + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt + for detail. + +Example 1 (MT7623 SoC): + + cpu_opp_table: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1050000>; + }; + + opp-747500000 { + opp-hz = /bits/ 64 <747500000>; + opp-microvolt = <1050000>; + }; + + opp-1040000000 { + opp-hz = /bits/ 64 <1040000000>; + opp-microvolt = <1150000>; + }; + + opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1200000>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1300000>; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <7>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + operating-points-v2 = <&cpu_opp_table>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + operating-points-v2 = <&cpu_opp_table>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + operating-points-v2 = <&cpu_opp_table>; + }; + +Example 2 (MT8173 SoC): + cpu_opp_table_a: opp_table_a { + compatible = "operating-points-v2"; + opp-shared; + + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <859000>; + }; + + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <908000>; + }; + + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <983000>; + }; + + opp-1105000000 { + opp-hz = /bits/ 64 <1105000000>; + opp-microvolt = <1009000>; + }; + + opp-1183000000 { + opp-hz = /bits/ 64 <1183000000>; + opp-microvolt = <1028000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <1083000>; + }; + + opp-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <1109000>; + }; + + opp-1573000000 { + opp-hz = /bits/ 64 <1573000000>; + opp-microvolt = <1125000>; + }; + }; + + cpu_opp_table_b: opp_table_b { + compatible = "operating-points-v2"; + opp-shared; + + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <828000>; + }; + + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <867000>; + }; + + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <927000>; + }; + + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <968000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1007000000>; + opp-microvolt = <1028000>; + }; + + opp-1612000000 { + opp-hz = /bits/ 64 <1612000000>; + opp-microvolt = <1049000>; + }; + + opp-1807000000 { + opp-hz = /bits/ 64 <1807000000>; + opp-microvolt = <1089000>; + }; + + opp-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1125000>; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_a>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_a>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_b>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_b>; + }; + + &cpu0 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu1 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; + + &cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; diff --git a/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt new file mode 100644 index 000000000000..d9cca4875bd6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt @@ -0,0 +1,16 @@ +Axis crypto engine with PDMA interface. + +Required properties: +- compatible : Should be one of the following strings: + "axis,artpec6-crypto" for the version in the Axis ARTPEC-6 SoC + "axis,artpec7-crypto" for the version in the Axis ARTPEC-7 SoC. +- reg: Base address and size for the PDMA register area. +- interrupts: Interrupt handle for the PDMA interrupt line. + +Example: + +crypto@f4264000 { + compatible = "axis,artpec6-crypto"; + reg = <0xf4264000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt index f2aab3dc2b52..7de1a9674c70 100644 --- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -66,3 +66,16 @@ sha@f8034000 { dmas = <&dma1 2 17>; dma-names = "tx"; }; + +* Eliptic Curve Cryptography (I2C) + +Required properties: +- compatible : must be "atmel,atecc508a". +- reg: I2C bus address of the device. +- clock-frequency: must be present in the i2c controller node. + +Example: +atecc508a@C0 { + compatible = "atmel,atecc508a"; + reg = <0xC0>; +}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 6949e50f1f16..76a0b4e80e83 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -13,5 +13,4 @@ dcp@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index 941bb6a6fb13..fbc07d12322f 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -23,5 +23,4 @@ Example: interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt index c6c6a4a045bd..28d3f2496b89 100644 --- a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt +++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt @@ -41,5 +41,4 @@ Examples: clock-names = "cesa0", "cesa1"; marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; marvell,crypto-sram-size = <0x600>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt index c0c35f00335b..d9b92e2f3138 100644 --- a/Documentation/devicetree/bindings/crypto/mv_cesa.txt +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -29,5 +29,4 @@ Examples: interrupts = <22>; marvell,crypto-srams = <&crypto_sram>; marvell,crypto-sram-size = <0x600>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt index 096df34b11c1..5e2ba385b8c9 100644 --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt @@ -25,5 +25,4 @@ Examples: clock-names = "aclk", "hclk", "sclk", "apb_pclk"; resets = <&cru SRST_CRYPTO>; reset-names = "crypto-rst"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.txt b/Documentation/devicetree/bindings/crypto/st,stm32-hash.txt new file mode 100644 index 000000000000..04fc246f02f7 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.txt @@ -0,0 +1,30 @@ +* STMicroelectronics STM32 HASH + +Required properties: +- compatible: Should contain entries for this and backward compatible + HASH versions: + - "st,stm32f456-hash" for stm32 F456. + - "st,stm32f756-hash" for stm32 F756. +- reg: The address and length of the peripheral registers space +- interrupts: the interrupt specifier for the HASH +- clocks: The input clock of the HASH instance + +Optional properties: +- resets: The input reset of the HASH instance +- dmas: DMA specifiers for the HASH. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request name. Should be "in" if a dma is present. +- dma-maxburst: Set number of maximum dma burst supported + +Example: + +hash1: hash@50060400 { + compatible = "st,stm32f756-hash"; + reg = <0x50060400 0x400>; + interrupts = <80>; + clocks = <&rcc 0 STM32F7_AHB2_CLOCK(HASH)>; + resets = <&rcc STM32F7_AHB2_RESET(HASH)>; + dmas = <&dma2 7 2 0x400 0x0>; + dma-names = "in"; + dma-maxburst = <0>; +}; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt index f2233138eba9..001dd63979a9 100644 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt @@ -15,5 +15,4 @@ Example: rockchip,pmu = <&pmugrf>; clocks = <&cru PCLK_DDR_MON>; clock-names = "pclk_ddr_mon"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index 7a9e8603c150..d6d2833482c9 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -205,5 +205,4 @@ Example: rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>; rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>; rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index ecb8da063d07..1a21202778ee 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -34,7 +34,6 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; display = <&display0>; - status = "okay"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index ec94468b35be..82f2acb3d374 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -23,7 +23,6 @@ Example: interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; - status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt new file mode 100644 index 000000000000..b13adf30b8d3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt @@ -0,0 +1,32 @@ +Synopsys DesignWare MIPI DSI host controller +============================================ + +This document defines device tree properties for the Synopsys DesignWare MIPI +DSI host controller. It doesn't constitue a device tree binding specification +by itself but is meant to be referenced by platform-specific device tree +bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each optional property is used or not. + +- reg: Memory mapped base address and length of the DesignWare MIPI DSI + host controller registers. (mandatory) + +- clocks: References to all the clocks specified in the clock-names property + as specified in [1]. (mandatory) + +- clock-names: + - "pclk" is the peripheral clock for either AHB and APB. (mandatory) + - "px_clk" is the pixel clock for the DPI/RGB input. (optional) + +- resets: References to all the resets specified in the reset-names property + as specified in [2]. (optional) + +- reset-names: string reset name, must be "apb" if used. (optional) + +- panel or bridge node: see [3]. (mandatory) + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt index 7baa6582517e..aacc8b92968c 100644 --- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt @@ -33,7 +33,6 @@ stdp2690-ge-b850v3-fw required properties: Example: &mux2_i2c2 { - status = "okay"; clock-frequency = <100000>; stdp4028@73 { diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index 81b68580e199..cb7ffc58c564 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -43,7 +43,6 @@ Example: clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; clock-names = "iahb", "isfr"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt index 549c538b38a5..fc2588292a68 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -25,12 +25,6 @@ Required properties: size-cells must 1 and 0, respectively. - port: contains an endpoint node which is connected to the endpoint in the mic node. The reg value muset be 0. -- i80-if-timings: specify whether the panel which is connected to decon uses - i80 lcd interface or mipi video interface. This node contains - no timing information as that of fimd does. Because there is - no register in decon to specify i80 interface timing value, - it is not needed, but make it remain to use same kind of node - in fimd and exynos7 decon. Example: SoC specific DT entry: @@ -59,9 +53,3 @@ decon: decon@13800000 { }; }; }; - -Board specific DT entry: -&decon { - i80-if-timings { - }; -}; diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt index 6fa4ab668db5..475008747801 100644 --- a/Documentation/devicetree/bindings/display/fsl,tcon.txt +++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt @@ -14,5 +14,4 @@ timing-controller@4003d000 { reg = <0x4003d000 0x1000>; clocks = <&clks VF610_CLK_TCON0>; clock-names = "ipg"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index fa01db7eb66c..f79854783c2c 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -116,7 +116,7 @@ Parallel display support Required properties: - compatible: Should be "fsl,imx-parallel-display" Optional properties: -- interface_pix_fmt: How this display is connected to the +- interface-pix-fmt: How this display is connected to the display interface. Currently supported types: "rgb24", "rgb565", "bgr666" and "lvds666". - edid: verbatim EDID data block describing attached display. diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt index 309c47f25b87..f79641bd5f18 100644 --- a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt +++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt @@ -23,7 +23,6 @@ Example: reg = <0x44000000 0x10000>; interrupts = <17>; clocks = <&clks CLK_LCD>; - status = "okay"; port { lcdc_out: endpoint { diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt index 5c70a8380e58..d0f55161579a 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -18,6 +18,5 @@ Example: power-supply = <...>; backlight = <&backlight>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/display/repaper.txt b/Documentation/devicetree/bindings/display/repaper.txt new file mode 100644 index 000000000000..f5f9f9cf6a25 --- /dev/null +++ b/Documentation/devicetree/bindings/display/repaper.txt @@ -0,0 +1,52 @@ +Pervasive Displays RePaper branded e-ink displays + +Required properties: +- compatible: "pervasive,e1144cs021" for 1.44" display + "pervasive,e1190cs021" for 1.9" display + "pervasive,e2200cs021" for 2.0" display + "pervasive,e2271cs021" for 2.7" display + +- panel-on-gpios: Timing controller power control +- discharge-gpios: Discharge control +- reset-gpios: RESET pin +- busy-gpios: BUSY pin + +Required property for e2271cs021: +- border-gpios: Border control + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional property: +- pervasive,thermal-zone: name of thermometer's thermal zone + +Example: + + display_temp: lm75@48 { + compatible = "lm75b"; + reg = <0x48>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + display { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&display_temp>; + }; + }; + + papirus27@0{ + compatible = "pervasive,e2271cs021"; + reg = <0>; + + spi-max-frequency = <8000000>; + + panel-on-gpios = <&gpio 23 0>; + border-gpios = <&gpio 14 0>; + discharge-gpios = <&gpio 15 0>; + reset-gpios = <&gpio 24 0>; + busy-gpios = <&gpio 25 0>; + + pervasive,thermal-zone = "display"; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt index 47665a12786f..43561584c13a 100644 --- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -59,7 +59,6 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&edp_hpd>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index 046076c6b277..adc94fc3c9f8 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -11,7 +11,9 @@ following device-specific properties. Required properties: -- compatible: Shall contain "rockchip,rk3288-dw-hdmi". +- compatible: should be one of the following: + "rockchip,rk3288-dw-hdmi" + "rockchip,rk3399-dw-hdmi" - reg: See dw_hdmi.txt. - reg-io-width: See dw_hdmi.txt. Shall be 4. - interrupts: HDMI interrupt number @@ -30,7 +32,8 @@ Optional properties I2C master controller. - clock-names: See dw_hdmi.txt. The "cec" clock is optional. - clock-names: May contain "cec" as defined in dw_hdmi.txt. - +- clock-names: May contain "grf", power for grf io. +- clock-names: May contain "vpll", external clock for some hdmi phy. Example: @@ -43,7 +46,6 @@ hdmi: hdmi@ff980000 { interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; - status = "disabled"; ports { hdmi_in: port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 543b07435f4f..6bb59ab39f2f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -36,7 +36,6 @@ Example: resets = <&cru SRST_MIPIDSI0>; reset-names = "apb"; rockchip,grf = <&grf>; - status = "okay"; ports { #address-cells = <1>; @@ -65,6 +64,5 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; backlight = <&backlight>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt index 8096a29f9776..cec21714f0e0 100644 --- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt @@ -25,7 +25,6 @@ hdmi: hdmi@20034000 { clock-names = "pclk"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; - status = "disabled"; hdmi_in: port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index 9eb3f0a2a078..5d835d9c1ba8 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt @@ -8,8 +8,12 @@ Required properties: - compatible: value should be one of the following "rockchip,rk3036-vop"; "rockchip,rk3288-vop"; + "rockchip,rk3368-vop"; + "rockchip,rk3366-vop"; "rockchip,rk3399-vop-big"; "rockchip,rk3399-vop-lit"; + "rockchip,rk3228-vop"; + "rockchip,rk3328-vop"; - interrupts: should contain a list of all VOP IP block interrupts in the order: VSYNC, LCD_SYSTEM. The interrupt specifier diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt index c46ba641a1df..a9168ae6946c 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt @@ -28,6 +28,5 @@ chosen { allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt new file mode 100644 index 000000000000..1d0dad1210d3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt @@ -0,0 +1,22 @@ +Sitronix ST7586 display panel + +Required properties: +- compatible: "lego,ev3-lcd". +- a0-gpios: The A0 signal (since this binding is for serial mode, this is + the pin labeled D1 on the controller, not the pin labeled A0) +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt index 8e1476941c0f..74b5ac7b26d6 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -1,7 +1,6 @@ * STMicroelectronics STM32 lcd-tft display controller - ltdc: lcd-tft display controller host - must be a sub-node of st-display-subsystem Required properties: - compatible: "st,stm32-ltdc" - reg: Physical base address of the IP registers and length of memory mapped region. @@ -13,8 +12,40 @@ Required nodes: - Video port for RGB output. -Example: +* STMicroelectronics STM32 DSI controller specific extensions to Synopsys + DesignWare MIPI DSI host controller +The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI +DSI host controller. For all mandatory properties & nodes, please refer +to the related documentation in [5]. + +Mandatory properties specific to STM32 DSI: +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. +- compatible: "st,stm32-dsi". +- clock-names: + - phy pll reference clock string name, must be "ref". +- resets: see [5]. +- reset-names: see [5]. + +Mandatory nodes specific to STM32 DSI: +- ports: A node containing DSI input & output port nodes with endpoint + definitions as documented in [3] & [4]. + - port@0: DSI input port node, connected to the ltdc rgb output port. + - port@1: DSI output port node, connected to a panel or a bridge input port. +- panel or bridge node: A node containing the panel or bridge description as + documented in [6]. + - port: panel or bridge port node, connected to the DSI output port (port@1). + +Note: You can find more documentation in the following references +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/graph.txt +[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt +[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt + +Example 1: RGB panel / { ... soc { @@ -34,3 +65,73 @@ Example: }; }; }; + +Example 2: DSI panel + +/ { + ... + soc { + ... + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + + + dsi: dsi@40016c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-dsi"; + reg = <0x40016c00 0x800>; + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; + clock-names = "ref", "pclk"; + resets = <&rcc STM32F4_APB2_RESET(DSI)>; + reset-names = "apb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_in_panel>; + }; + }; + + }; + + panel-dsi@0 { + reg = <0>; /* dsi virtual channel (0..3) */ + compatible = ...; + enable-gpios = ...; + + port { + dsi_in_panel: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + }; + + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index b83e6018041d..92441086caba 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -4,15 +4,33 @@ Allwinner A10 Display Pipeline The Allwinner A10 Display pipeline is composed of several components that are going to be documented below: -For the input port of all components up to the TCON in the display -pipeline, if there are multiple components, the local endpoint IDs -must correspond to the index of the upstream block. For example, if -the remote endpoint is Frontend 1, then the local endpoint ID must -be 1. - -Conversely, for the output ports of the same group, the remote endpoint -ID must be the index of the local hardware block. If the local backend -is backend 1, then the remote endpoint ID must be 1. +For all connections between components up to the TCONs in the display +pipeline, when there are multiple components of the same type at the +same depth, the local endpoint ID must be the same as the remote +component's index. For example, if the remote endpoint is Frontend 1, +then the local endpoint ID must be 1. + + Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 + [1] -- -- [1] [1] -- -- [1] + \ / \ / + X X + / \ / \ + [0] -- -- [0] [0] -- -- [0] + Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 + +For a two pipeline system such as the one depicted above, the lines +represent the connections between the components, while the numbers +within the square brackets corresponds to the ID of the local endpoint. + +The same rule also applies to DE 2.0 mixer-TCON connections: + + Mixer 0 [0] ----------- [0] TCON 0 + [1] ---- ---- [1] + \ / + X + / \ + [0] ---- ---- [0] + Mixer 1 [1] ----------- [1] TCON 1 HDMI Encoder ------------ @@ -260,7 +278,6 @@ hdmi: hdmi@01c16000 { <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_DEDICATED 24>; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt index 191d7bd8a6fe..97e213e07660 100644 --- a/Documentation/devicetree/bindings/dma/fsl-edma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -72,5 +72,4 @@ sai2: sai@40031000 { dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt index c075f5988135..0ffb4d8766a8 100644 --- a/Documentation/devicetree/bindings/dma/mv-xor.txt +++ b/Documentation/devicetree/bindings/dma/mv-xor.txt @@ -30,7 +30,6 @@ xor@d0060900 { reg = <0xd0060900 0x100 0xd0060b00 0x100>; clocks = <&coreclk 0>; - status = "okay"; xor00 { interrupts = <51>; diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt index 9bcab9115982..9d3b2f917b7b 100644 --- a/Documentation/devicetree/bindings/dma/qcom_adm.txt +++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt @@ -48,7 +48,6 @@ Each dmas request consists of 3 cells: Example: spi4: spi@1a280000 { - status = "ok"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index 79a204d50234..891db41e9420 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -25,6 +25,7 @@ Required Properties: - "renesas,dmac-r8a7794" (R-Car E2) - "renesas,dmac-r8a7795" (R-Car H3) - "renesas,dmac-r8a7796" (R-Car M3-W) + - "renesas,dmac-r8a77970" (R-Car V3M) - reg: base address and length of the registers block for the DMAC diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index e7780a186a36..1be6941ac1e5 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,r8a7793-usb-dmac" (R-Car M2-N) - "renesas,r8a7794-usb-dmac" (R-Car E2) - "renesas,r8a7795-usb-dmac" (R-Car H3) + - "renesas,r8a7796-usb-dmac" (R-Car M3-W) - reg: base address and length of the registers block for the DMAC - interrupts: interrupt specifiers for the DMAC, one for each entry in interrupt-names. diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index 4775c66f4508..a122723907ac 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -63,7 +63,6 @@ Example: compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; interrupts = <0 35 0x4>; - status = "disabled"; dmas = <&dmahost 12 0 1>, <&dmahost 13 0 1 0>; dma-names = "rx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt index 495d853c569b..52cfec9e77ad 100644 --- a/Documentation/devicetree/bindings/dma/st_fdma.txt +++ b/Documentation/devicetree/bindings/dma/st_fdma.txt @@ -69,7 +69,6 @@ Example: sti_uni_player2: sti-uni-player@2 { compatible = "st,sti-uni-player"; - status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index 95800ab37bb0..aa7dbd565ad0 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -135,5 +135,4 @@ Example: <&dma 13 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "rx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index f1634a27a830..3b484380c56a 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -40,7 +40,6 @@ Example: clock-names = "ahb", "mod"; dmas = <&dma 1 29>, <&dma 1 28>; dma-names = "rx", "tx"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 6b267045f522..98fbe1a5c6dd 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -9,6 +9,7 @@ Required properties: "allwinner,sun8i-a23-dma" "allwinner,sun8i-a83t-dma" "allwinner,sun8i-h3-dma" + "allwinner,sun8i-v3s-dma" - reg: Should contain the registers base address and length - interrupts: Should contain a reference to the interrupt used by this device - clocks: Should contain a reference to the parent AHB clock diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index aead5869a28d..b849a1ed389d 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -62,7 +62,6 @@ uart1: serial@4806a000 { interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; - status = "disabled"; /* Requesting crossbar input 49 and 50 */ dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 18090e7226b4..33d9e386dc45 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -102,7 +102,6 @@ mcasp0: mcasp@48038000 { reg-names = "mpu", "dat"; interrupts = <80>, <81>; interrupt-names = "tx", "rx"; - status = "disabled"; /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */ dmas = <&edma 8 2>, <&edma 9 2>; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt new file mode 100644 index 000000000000..8e8625c00dfa --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt @@ -0,0 +1,24 @@ +ChromeOS EC USB Type-C cable and accessories detection + +On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is +able to detect the state of external accessories such as display adapters +or USB devices when said accessories are attached or detached. + +The node for this device must be under a cros-ec node like google,cros-ec-spi +or google,cros-ec-i2c. + +Required properties: +- compatible: Should be "google,extcon-usbc-cros-ec". +- google,usb-port-id: Specifies the USB port ID to use. + +Example: + cros-ec@0 { + compatible = "google,cros-ec-i2c"; + + ... + + extcon { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + } diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt new file mode 100644 index 000000000000..48478bc07e29 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt @@ -0,0 +1,29 @@ +Altera Passive Serial SPI FPGA Manager + +Altera FPGAs support a method of loading the bitstream over what is +referred to as "passive serial". +The passive serial link is not technically SPI, and might require extra +circuits in order to play nicely with other SPI slaves on the same bus. + +See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +Required properties: +- compatible: Must be one of the following: + "altr,fpga-passive-serial", + "altr,fpga-arria10-passive-serial" +- reg: SPI chip select of the FPGA +- nconfig-gpios: config pin (referred to as nCONFIG in the manual) +- nstat-gpios: status pin (referred to as nSTATUS in the manual) + +Optional properties: +- confd-gpios: confd pin (referred to as CONF_DONE in the manual) + +Example: + fpga: fpga@0 { + compatible = "altr,fpga-passive-serial"; + spi-max-frequency = <20000000>; + reg = <0>; + nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt new file mode 100644 index 000000000000..8dcfba926bc7 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt @@ -0,0 +1,36 @@ +Xilinx LogiCORE Partial Reconfig Decoupler Softcore + +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more +decouplers / fpga bridges. +The controller can decouple/disable the bridges which prevents signal +changes from passing through the bridge. The controller can also +couple / enable the bridges which allows traffic to pass through the +bridge normally. + +The Driver supports only MMIO handling. A PR region can have multiple +PR Decouplers which can be handled independently or chained via decouple/ +decouple_status signals. + +Required properties: +- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by + "xlnx,pr-decoupler" +- regs : base address and size for decoupler module +- clocks : input clock to IP +- clock-names : should contain "aclk" + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + +See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings. + +Example: + fpga-bridge@100000450 { + compatible = "xlnx,pr-decoupler-1.00", + "xlnx-pr-decoupler"; + regs = <0x10000045 0x10>; + clocks = <&clkc 15>; + clock-names = "aclk"; + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt index 9766f7472f51..cfa4ed42b62f 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt @@ -31,7 +31,6 @@ Example for full FPGA configuration: cell-index = <1>; interrupts = <92>; clocks = <&coreclk 0>; - status = "okay"; fpga_mgr_spi: fpga-mgr@0 { compatible = "xlnx,fpga-slave-serial"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt index ce1b2231bf5d..2a97553d8d76 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt @@ -12,6 +12,9 @@ Required properties: 1 = active low - registers-number: Number of daisy-chained shift registers +Optional properties: +- enable-gpios: GPIO connected to the OE (Output Enable) pin. + Example: gpio5: gpio5@0 { diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt index c756afa88cc6..fc6378c778c5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt @@ -18,7 +18,7 @@ Required properties: Optional properties: - interrupt-parent : The parent interrupt controller, optional if inherited -- clocks : A phandle to the HPLL clock node for debounce timings +- clocks : A phandle to the clock to use for debounce timings The gpio and interrupt properties are further described in their respective bindings documentation: diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt index 5079ba7d6568..8beb0539b6d8 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -1,7 +1,10 @@ Davinci/Keystone GPIO controller bindings Required Properties: -- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio" +- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs + "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L, + 66AK2E SoCs + "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G - reg: Physical base address of the controller and the size of memory mapped registers. @@ -20,7 +23,21 @@ Required Properties: - ti,ngpio: The number of GPIO pins supported. - ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt - line to processor. + line to processor. + +- clocks: Should contain the device's input clock, and should be defined as per + the appropriate clock bindings consumer usage in, + + Documentation/devicetree/bindings/clock/keystone-gate.txt + for 66AK2HK/66AK2L/66AK2E SoCs or, + + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + for 66AK2G SoCs + +- clock-names: Name should be "gpio"; + +Currently clock-names and clocks are needed for all keystone 2 platforms +Davinci platforms do not have DT clocks as of now. The GPIO controller also acts as an interrupt controller. It uses the default two cells specifier as described in Documentation/devicetree/bindings/ @@ -60,3 +77,73 @@ leds { ... }; }; + +Example for 66AK2G: + +gpio0: gpio@2603000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x02603000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001b 0x0>; + clock-names = "gpio"; +}; + +Example for 66AK2HK/66AK2L/66AK2E: + +gpio0: gpio@260bf00 { + compatible = "ti,keystone-gpio"; + reg = <0x0260bf00 0x100>; + gpio-controller; + #gpio-cells = <2>; + /* HW Interrupts mapped to GPIO pins */ + interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkgpio>; + clock-names = "gpio"; + ti,ngpio = <32>; + ti,davinci-gpio-unbanked = <32>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 4b6cc632ca5c..69d46162d0f5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -23,7 +23,6 @@ gpio0: gpio@1100 { #gpio-cells = <2>; reg = <0x1100 0x080>; interrupts = <78 0x8>; - status = "okay"; }; Example of gpio-controller node for a ls2080a SoC: diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt index 436cc99c6598..0ccbae44019c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt @@ -5,7 +5,9 @@ functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of each, and each PORT module has its own interrupt. Required properties for GPIO node: -- compatible : Should be "fsl,<soc>-gpio", currently "fsl,vf610-gpio" +- compatible : Should be "fsl,<soc>-gpio", below is supported list: + "fsl,vf610-gpio" + "fsl,imx7ulp-gpio" - reg : The first reg tuple represents the PORT module, the second tuple the GPIO module. - interrupts : Should be the port interrupt shared by all 32 pins. diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 6826a371fb69..51c86f69995e 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -2,8 +2,9 @@ Required Properties: - - compatible: should contain one of the following. + - compatible: should contain one or more of the following: - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller. + - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller. - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. @@ -13,7 +14,14 @@ Required Properties: - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller. - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller. - "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller. - - "renesas,gpio-rcar": for generic R-Car GPIO controller. + - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller. + - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller. + - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 GPIO controller. + - "renesas,gpio-rcar": deprecated. + + When compatible with the generic version nodes must list the + SoC-specific version corresponding to the platform first followed by + the generic version. - reg: Base address and length of each memory resource used by the GPIO controller hardware module. @@ -43,7 +51,7 @@ interrupt-controller/interrupts.txt. Example: R8A7779 (R-Car H1) GPIO controller nodes gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupt-parent = <&gic>; interrupts = <0 141 0x4>; @@ -55,7 +63,7 @@ Example: R8A7779 (R-Car H1) GPIO controller nodes }; ... gpio6: gpio@ffc46000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc46000 0x2c>; interrupt-parent = <&gic>; interrupts = <0 147 0x4>; diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt index 96c37eb15075..dd04d96e6ff1 100644 --- a/Documentation/devicetree/bindings/gpio/spear_spics.txt +++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt @@ -42,7 +42,6 @@ spics: spics@e0700000{ spi0: spi@e0100000 { - status = "okay"; num-cs = <3>; cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index 2b6243e730f6..b4ebd56d03f3 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -10,6 +10,7 @@ Required properties: * And, optionally, one of the vendor specific compatible: + allwinner,sun4i-a10-mali + allwinner,sun7i-a20-mali + + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + stericsson,db8500-mali @@ -58,6 +59,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - allwinner,sun50i-h5-mali + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index b7e4c7444510..f32bbba4d3bc 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -51,7 +51,6 @@ Example for GK20A: resets = <&tegra_car 184>; reset-names = "gpu"; iommus = <&mc TEGRA_SWGROUP_GPU>; - status = "disabled"; }; Example for GM20B: @@ -70,7 +69,6 @@ Example for GM20B: resets = <&tegra_car 184>; reset-names = "gpu"; iommus = <&mc TEGRA_SWGROUP_GPU>; - status = "disabled"; }; Example for GP10B: @@ -89,5 +87,4 @@ Example for GP10B: reset-names = "gpu"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; iommus = <&smmu TEGRA186_SID_GPU>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt index c4f358dafdaa..1e7959332dbc 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt @@ -24,5 +24,4 @@ Example: interrupts = <0 89 0>; clocks = <&clock 177>, <&clock 277>; clock-names = "sclk_fimg2d", "fimg2d"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index f26625e42693..b8eca3c7810d 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -92,6 +92,5 @@ ssi-controller@48058000 { interrupts = <69>, <70>; - status = "disabled"; /* second port is not used on N900 */ } } diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt index cf4460564adb..367c8203213b 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -11,6 +11,8 @@ Required properties for pwm-tacho node: - #size-cells : should be 1. +- #cooling-cells: should be 2. + - reg : address and length of the register set for the device. - pinctrl-names : a pinctrl state named "default" must be defined. @@ -28,12 +30,17 @@ fan subnode format: Under fan subnode there can upto 8 child nodes, with each child node representing a fan. If there are 8 fans each fan can have one PWM port and one/two Fan tach inputs. +For PWM port can be configured cooling-levels to create cooling device. +Cooling device could be bound to a thermal zone for the thermal control. Required properties for each child node: - reg : should specify PWM source port. integer value in the range 0 to 7 with 0 indicating PWM port A and 7 indicating PWM port H. +- cooling-levels: PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states. + - aspeed,fan-tach-ch : should specify the Fan tach input channel. integer value in the range 0 through 15, with 0 indicating Fan tach channel 0 and 15 indicating Fan tach channel 15. @@ -50,6 +57,7 @@ pwm_tacho_fixed_clk: fixedclk { pwm_tacho: pwmtachocontroller@1e786000 { #address-cells = <1>; #size-cells = <1>; + #cooling-cells = <2>; reg = <0x1E786000 0x1000>; compatible = "aspeed,ast2500-pwm-tacho"; clocks = <&pwm_tacho_fixed_clk>; @@ -58,6 +66,7 @@ pwm_tacho: pwmtachocontroller@1e786000 { fan@0 { reg = <0x00>; + cooling-levels = /bits/ 8 <125 151 177 203 229 255>; aspeed,fan-tach-ch = /bits/ 8 <0x00>; }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt new file mode 100644 index 000000000000..f68a0a68fc52 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt @@ -0,0 +1,21 @@ +Device-tree bindings for IBM Common Form Factor Power Supply Version 1 +---------------------------------------------------------------------- + +Required properties: + - compatible = "ibm,cffps1"; + - reg = < I2C bus address >; : Address of the power supply on the + I2C bus. + +Example: + + i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + < more properties > + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt new file mode 100644 index 000000000000..33fd00a987c7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt @@ -0,0 +1,10 @@ +Lantiq cpu temperatur sensor + +Requires node properties: +- compatible value : + "lantiq,cputemp" + +Example: + cputemp@0 { + compatible = "lantiq,cputemp"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt index 8ce9cd2855b5..c143948b2a37 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt @@ -20,8 +20,8 @@ i2c@0 { #address-cells = <1>; #size-cells = <0>; - retu-mfd: retu@1 { - compatible = "retu-mfd"; + retu: retu@1 { + compatible = "nokia,retu"; reg = <0x1>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt index 7ce23ac61308..81b5d55086fa 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -102,7 +102,6 @@ And for clarification, here are the snipplets for the i2c-parents: #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - status = "disabled"; gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */ &gpio5 5 GPIO_ACTIVE_HIGH /* scl */ >; diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt index 50b25c3da186..3b30e54ae3c7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt @@ -22,7 +22,6 @@ Example: interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; clock-frequency = <100000>; - status = "ok"; energymicro,location = <3>; eeprom@50 { diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index 656716b72cc4..f64064f8bdc2 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -71,5 +71,4 @@ Example: reset-names = "i2c"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt index 3223684a643b..552e7a83951d 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -11,6 +11,11 @@ Required properties: - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC. - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC. - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC. + - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware + trigger pin. When the specific edge type is detected, the conversion will + start. Possible values are rising, falling, or both. + This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING , + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH Example: @@ -25,4 +30,5 @@ adc: adc@fc030000 { atmel,startup-time-ms = <4>; vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; } diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt index caaaed765ce4..7b1b1e4086d4 100644 --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt @@ -37,5 +37,4 @@ For example: clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; clock-names = "tsc_clk"; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt index 0bcae5140bc5..9ada5abd45fa 100644 --- a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt @@ -17,5 +17,4 @@ adc0: adc@400e3000 { clocks = <&ccu1 CLK_APB3_ADC0>; vref-supply = <®_vdda>; resets = <&rgu 40>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 68c45cbbe3d9..64dc4843c180 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -12,6 +12,7 @@ for the Thermal Controller which holds a phandle to the AUXADC. Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs + - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs - reg: Address range of the AUXADC unit. - clocks: Should contain a clock specifier for each entry in clock-names diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index e0a9b9d6d6fd..c2c50b59873d 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -6,6 +6,7 @@ Required properties: - "rockchip,rk3066-tsadc": for rk3036 - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328 - "rockchip,rk3399-saradc": for rk3399 + - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108 - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 8310073f14e1..48bfcaa3ffcd 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -74,6 +74,11 @@ Optional properties: * can be 6, 8, 10 or 12 on stm32f4 * can be 8, 10, 12, 14 or 16 on stm32h7 Default is maximum resolution if unset. +- st,min-sample-time-nsecs: Minimum sampling time in nanoseconds. + Depending on hardware (board) e.g. high/low analog input source impedance, + fine tune of ADC sampling time may be recommended. + This can be either one value or an array that matches 'st,adc-channels' list, + to set sample time resp. for all channels, or independently for each channel. Example: adc: adc@40012000 { diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt new file mode 100644 index 000000000000..a04aa5c04103 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt @@ -0,0 +1,27 @@ +STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter + +STM32 Low-Power Timer provides several counter modes. It can be used as: +- quadrature encoder to detect angular position and direction of rotary + elements, from IN1 and IN2 input signals. +- simple counter from IN1 input signal. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-counter". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes, + to set IN1/IN2 pins in mode of operation for Low-Power + Timer input on external pin. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt index 7d6647d4af5e..42db783c4e75 100644 --- a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt +++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt @@ -16,5 +16,4 @@ dac: dac@400e1000 { clocks = <&ccu1 CLK_APB3_DAC>; vref-supply = <®_vdda>; resets = <&rgu 42>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt index bcee71f808d0..bf2925c671c6 100644 --- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt @@ -10,7 +10,9 @@ current. Contents of a stm32 dac root node: ----------------------------------- Required properties: -- compatible: Must be "st,stm32h7-dac-core". +- compatible: Should be one of: + "st,stm32f4-dac-core" + "st,stm32h7-dac-core" - reg: Offset and length of the device's register set. - clocks: Must contain an entry for pclk (which feeds the peripheral bus interface) diff --git a/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt b/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt new file mode 100644 index 000000000000..c52333bdfd19 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt @@ -0,0 +1,17 @@ +* HDC100x temperature + humidity sensors + +Required properties: + - compatible: Should contain one of the following: + ti,hdc1000 + ti,hdc1008 + ti,hdc1010 + ti,hdc1050 + ti,hdc1080 + - reg: i2c address of the sensor + +Example: + +hdc100x@40 { + compatible = "ti,hdc1000"; + reg = <0x40>; +}; diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt index b20ab9c12080..10adeb0d703d 100644 --- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt +++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt @@ -5,9 +5,18 @@ Required properties: - reg: i2c address of the sensor / spi cs line Optional properties: +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. + Refer to pinctrl/pinctrl-bindings.txt for the property description. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with - flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. Refer to interrupt-controller/interrupts.txt for generic interrupt client node bindings. diff --git a/Documentation/devicetree/bindings/iio/humidity/htu21.txt b/Documentation/devicetree/bindings/iio/humidity/htu21.txt new file mode 100644 index 000000000000..97d79636f7ae --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/htu21.txt @@ -0,0 +1,13 @@ +*HTU21 - Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor + +Required properties: + + - compatible: should be "meas,htu21" or "meas,ms8607-humidity" + - reg: I2C address of the sensor + +Example: + +htu21@40 { + compatible = "meas,htu21"; + reg = <0x40>; +}; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 6f28ff55f3ec..1ff1af799c76 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -11,6 +11,14 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + (This binding is taken from pinctrl/pinctrl-bindings.txt) + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5637.txt b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt new file mode 100644 index 000000000000..1f43ffa068ac --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt @@ -0,0 +1,17 @@ +* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor + +Required properties: + + -compatible: should be one of the following + meas,ms5637 + meas,ms5805 + meas,ms5837 + meas,ms8607-temppressure + -reg: I2C address of the sensor + +Example: + +ms5637@76 { + compatible = "meas,ms5637"; + reg = <0x76>; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index eaa8fbba34e2..9ec6f5ce54fc 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -45,6 +45,7 @@ Accelerometers: - st,lis2dh12-accel - st,h3lis331dl-accel - st,lng2dm-accel +- st,lis3l02dq Gyroscopes: - st,l3g4200d-gyro @@ -52,6 +53,7 @@ Gyroscopes: - st,lsm330dl-gyro - st,lsm330dlc-gyro - st,l3gd20-gyro +- st,l3gd20h-gyro - st,l3g4is-gyro - st,lsm330-gyro - st,lsm9ds0-gyro @@ -62,6 +64,7 @@ Magnetometers: - st,lsm303dlhc-magn - st,lsm303dlm-magn - st,lis3mdl-magn +- st,lis2mdl Pressure sensors: - st,lps001wp-press diff --git a/Documentation/devicetree/bindings/iio/temperature/tsys01.txt b/Documentation/devicetree/bindings/iio/temperature/tsys01.txt new file mode 100644 index 000000000000..0d5cc5595d0c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/tsys01.txt @@ -0,0 +1,19 @@ +* TSYS01 - Measurement Specialties temperature sensor + +Required properties: + + - compatible: should be "meas,tsys01" + - reg: I2C address of the sensor (changeable via CSB pin) + + ------------------------ + | CSB | Device Address | + ------------------------ + 1 0x76 + 0 0x77 + +Example: + +tsys01@76 { + compatible = "meas,tsys01"; + reg = <0x76>; +}; diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt new file mode 100644 index 000000000000..85e6806b17d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt @@ -0,0 +1,23 @@ +STMicroelectronics STM32 Low-Power Timer Trigger + +STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used +by STM32 internal ADC and/or DAC. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-trigger". +- reg: Identify trigger hardware block. Must be 0, 1 or 2 + respectively for lptimer1, lptimer2 or lptimer3 + trigger output. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt index 55a653d15303..b8e8c769d434 100644 --- a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt +++ b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt @@ -4,7 +4,9 @@ Must be a sub-node of an STM32 Timers device tree node. See ../mfd/stm32-timers.txt for details about the parent node. Required parameters: -- compatible: Must be "st,stm32-timer-trigger". +- compatible: Must be one of: + "st,stm32-timer-trigger" + "st,stm32h7-timer-trigger" - reg: Identify trigger hardware block. Example: @@ -14,7 +16,7 @@ Example: compatible = "st,stm32-timers"; reg = <0x40010000 0x400>; clocks = <&rcc 0 160>; - clock-names = "clk_int"; + clock-names = "int"; timer@0 { compatible = "st,stm32-timer-trigger"; diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index 1852906517ab..23e3abc3fdef 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -22,6 +22,8 @@ Optional properties for main touchpad device: experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. +- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) + Example: touch@4b { diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt index b77f50bd6403..262deab73588 100644 --- a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt @@ -72,7 +72,6 @@ Example: /* Required Board specific properties */ keypad,num-rows = <5>; keypad,num-columns = <5>; - status = "okay"; linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */ MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */ diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index ee09c8f4474a..4c5312eaaa85 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -43,7 +43,7 @@ haptics: haptics@5a { mode = <DRV260X_LRA_MODE>; library-sel = <DRV260X_LIB_LRA>; vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; + vib-overdrive-mv = <3200>; } For more product information please see the link below: diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt index 9d9e930f3251..df531b5b6a0d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt @@ -32,5 +32,4 @@ Example: pinctrl-1 = <&pinctrl_touchctrl_default>; pinctrl-2 = <&pinctrl_touchctrl_gpios>; vf50-ts-min-pressure = <200>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index d4927c202aef..e67e58b61706 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -35,5 +35,4 @@ Example: measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; touchscreen-average-samples = <32>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt index 9e389493203f..49ccabbfa6f3 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -4,8 +4,10 @@ Required properties: - compatible: should be "fsl,<soc-name>-msi" to identify Layerscape PCIe MSI controller block such as: - "fsl,1s1021a-msi" - "fsl,1s1043a-msi" + "fsl,ls1021a-msi" + "fsl,ls1043a-msi" + "fsl,ls1046a-msi" + "fsl,ls1043a-v1.1-msi" - msi-controller: indicates that this is a PCIe MSI controller node - reg: physical base address of the controller and length of memory mapped. - interrupts: an interrupt to the parent interrupt controller. @@ -23,7 +25,7 @@ MSI controller node Examples: msi1: msi-controller@1571000 { - compatible = "fsl,1s1043a-msi"; + compatible = "fsl,ls1043a-msi"; reg = <0x0 0x1571000 0x0 0x8>, msi-controller; interrupts = <0 116 0x4>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt new file mode 100644 index 000000000000..48e71d3ac2ad --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt @@ -0,0 +1,32 @@ +UniPhier AIDET + +UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic +Interrupt Controller). GIC itself can handle only high level and rising edge +interrupts. The AIDET provides logic inverter to support low level and falling +edge interrupts. + +Required properties: +- compatible: Should be one of the following: + "socionext,uniphier-ld4-aidet" - for LD4 SoC + "socionext,uniphier-pro4-aidet" - for Pro4 SoC + "socionext,uniphier-sld8-aidet" - for sLD8 SoC + "socionext,uniphier-pro5-aidet" - for Pro5 SoC + "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-aidet" - for LD11 SoC + "socionext,uniphier-ld20-aidet" - for LD20 SoC + "socionext,uniphier-pxs3-aidet" - for PXs3 SoC +- reg: Specifies offset and length of the register set for the device. +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an interrupt + source. The value should be 2. The first cell defines the interrupt number + (corresponds to the SPI interrupt number of GIC). The second cell specifies + the trigger type as defined in interrupts.txt in this directory. + +Example: + + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt new file mode 100644 index 000000000000..12c5ef26ec73 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -0,0 +1,71 @@ +Analog devices AS3645A device tree bindings + +The AS3645A flash LED controller can drive two LEDs, one high current +flash LED and one indicator LED. The high current flash LED can be +used in torch mode as well. + +Ranges below noted as [a, b] are closed ranges between a and b, i.e. a +and b are included in the range. + +Please also see common.txt in the same directory. + + +Required properties +=================== + +compatible : Must be "ams,as3645a". +reg : The I2C address of the device. Typically 0x30. + + +Required properties of the "flash" child node +============================================= + +flash-timeout-us: Flash timeout in microseconds. The value must be in + the range [100000, 850000] and divisible by 50000. +flash-max-microamp: Maximum flash current in microamperes. Has to be + in the range between [200000, 500000] and + divisible by 20000. +led-max-microamp: Maximum torch (assist) current in microamperes. The + value must be in the range between [20000, 160000] and + divisible by 20000. +ams,input-max-microamp: Maximum flash controller input current. The + value must be in the range [1250000, 2000000] + and divisible by 50000. + + +Optional properties of the "flash" child node +============================================= + +label : The label of the flash LED. + + +Required properties of the "indicator" child node +================================================= + +led-max-microamp: Maximum indicator current. The allowed values are + 2500, 5000, 7500 and 10000. + +Optional properties of the "indicator" child node +================================================= + +label : The label of the indicator LED. + + +Example +======= + + as3645a@30 { + reg = <0x30>; + compatible = "ams,as3645a"; + flash { + flash-timeout-us = <150000>; + flash-max-microamp = <320000>; + led-max-microamp = <60000>; + ams,input-max-microamp = <1750000>; + label = "as3645a:flash"; + }; + indicator { + led-max-microamp = <10000>; + label = "as3645a:indicator"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt new file mode 100644 index 000000000000..cbe8dfd29715 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt @@ -0,0 +1,14 @@ +Device tree bindings for IR LED connected through gpio pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "gpio-ir-tx". + - gpios : Should specify the IR LED GPIO, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs + should be indicated using flags in the GPIO specifier. + +Example: + irled@0 { + compatible = "gpio-ir-tx"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt new file mode 100644 index 000000000000..66e5672c2e3d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt @@ -0,0 +1,13 @@ +Device tree bindings for IR LED connected through pwm pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "pwm-ir-tx". + - pwms : PWM property to point to the PWM device (phandle)/port (id) + and to specify the period time to be used: <&phandle id period_ns>; + +Example: + irled { + compatible = "pwm-ir-tx"; + pwms = <&pwm0 0 10000000>; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt index 76535ca37120..a48dda268f81 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -18,6 +18,9 @@ LED sub-node properties: see Documentation/devicetree/bindings/leds/common.txt - retain-state-suspended: (optional) The suspend state can be retained.Such as charge-led gpio. +- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. + Useful in BMC systems, for example when the BMC is rebooted while the host + remains up. - panic-indicator : (optional) see Documentation/devicetree/bindings/leds/common.txt diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt new file mode 100644 index 000000000000..7984efb767b4 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt @@ -0,0 +1,88 @@ +* NXP - pca955x LED driver + +The PCA955x family of chips are I2C LED blinkers whose pins not used +to control LEDs can be used as general purpose I/Os. The GPIO pins can +be input or output, and output pins can also be pulse-width controlled. + +Required properties: +- compatible : should be one of : + "nxp,pca9550" + "nxp,pca9551" + "nxp,pca9552" + "nxp,pca9553" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: I2C slave address. depends on the model. + +Optional properties: +- gpio-controller: allows pins to be used as GPIOs. +- #gpio-cells: must be 2. +- gpio-line-names: define the names of the GPIO lines + +LED sub-node properties: +- reg : number of LED line. + from 0 to 1 for the pca9550 + from 0 to 7 for the pca9551 + from 0 to 15 for the pca9552 + from 0 to 3 for the pca9553 +- type: (optional) either + PCA9532_TYPE_NONE + PCA9532_TYPE_LED + PCA9532_TYPE_GPIO + see dt-bindings/leds/leds-pca955x.h (default to LED) +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15"; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@0 { + label = "red:power"; + linux,default-trigger = "default-on"; + reg = <0>; + type = <PCA955X_TYPE_LED>; + }; + led@1 { + label = "green:power"; + reg = <1>; + type = <PCA955X_TYPE_LED>; + }; + led@2 { + label = "pca9552:yellow"; + reg = <2>; + type = <PCA955X_TYPE_LED>; + }; + led@3 { + label = "pca9552:white"; + reg = <3>; + type = <PCA955X_TYPE_LED>; + }; +}; diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt new file mode 100644 index 000000000000..21ffb5ed8183 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -0,0 +1,95 @@ +* Analog Devices ADV748X video decoder with HDMI receiver + +The ADV7481 and ADV7482 are multi format video decoders with an integrated +HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB +from three input sources HDMI, analog and TTL. + +Required Properties: + + - compatible: Must contain one of the following + - "adi,adv7481" for the ADV7481 + - "adi,adv7482" for the ADV7482 + + - reg: I2C slave address + +Optional Properties: + + - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or + "intrq3". All interrupts are optional. The "intrq3" interrupt + is only available on the adv7481 + - interrupts: Specify the interrupt lines for the ADV748x + +The device node must contain one 'port' child node per device input and output +port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes +are numbered as follows. + + Name Type Port + --------------------------------------- + AIN0 sink 0 + AIN1 sink 1 + AIN2 sink 2 + AIN3 sink 3 + AIN4 sink 4 + AIN5 sink 5 + AIN6 sink 6 + AIN7 sink 7 + HDMI sink 8 + TTL sink 9 + TXA source 10 + TXB source 11 + +The digital output port nodes must contain at least one endpoint. + +Ports are optional if they are not connected to anything at the hardware level. + +Example: + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio6>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@10 { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@11 { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt new file mode 100644 index 000000000000..b88dcdd41def --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt @@ -0,0 +1,9 @@ +Dongwoon Anatech DW9714 camera voice coil lens driver + +DW9174 is a 10-bit DAC with current sink capability. It is intended +for driving voice coil lenses in camera modules. + +Mandatory properties: + +- compatible: "dongwoon,dw9714" +- reg: I²C slave address diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt new file mode 100644 index 000000000000..8671bdb08080 --- /dev/null +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt @@ -0,0 +1,28 @@ +* Amlogic Meson AO-CEC driver + +The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is +to handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be following + "amlogic,meson-gx-ao-cec" + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : AO-CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to AO-CEC clock. + - clock-names : from common clock binding: must contain "core", + corresponding to entry in the clocks property. + - hdmi-phandle: phandle to the HDMI controller + +Example: + +cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; + hdmi-phandle = <&hdmi_tx>; +}; diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt index 2be2005577d6..5e18087ce11f 100644 --- a/Documentation/devicetree/bindings/media/mtk-cir.txt +++ b/Documentation/devicetree/bindings/media/mtk-cir.txt @@ -2,10 +2,14 @@ Device-Tree bindings for Mediatek consumer IR controller found in Mediatek SoC family Required properties: -- compatible : "mediatek,mt7623-cir" +- compatible : Should be + "mediatek,mt7623-cir": for MT7623 SoC + "mediatek,mt7622-cir": for MT7622 SoC - clocks : list of clock specifiers, corresponding to entries in clock-names property; -- clock-names : should contain "clk" entries; +- clock-names : should contain + - "clk" entries: for MT7623 SoC + - "clk", "bus" entries: for MT7622 SoC - interrupts : should contain IR IRQ number; - reg : should contain IO map address for IR. diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt index 11f5b5d51af8..bc03ec096269 100644 --- a/Documentation/devicetree/bindings/media/pxa-camera.txt +++ b/Documentation/devicetree/bindings/media/pxa-camera.txt @@ -24,7 +24,6 @@ Example: clock-frequency = <50000000>; clock-output-names = "qci_mclk"; - status = "okay"; port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt new file mode 100644 index 000000000000..cadecebc73f7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt @@ -0,0 +1,197 @@ +Qualcomm Camera Subsystem + +* Properties + +- compatible: + Usage: required + Value type: <stringlist> + Definition: Should contain: + - "qcom,msm8916-camss" +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: Register ranges as listed in the reg-names property. +- reg-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "csiphy0" + - "csiphy0_clk_mux" + - "csiphy1" + - "csiphy1_clk_mux" + - "csid0" + - "csid1" + - "ispif" + - "csi_clk_mux" + - "vfe0" +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: Interrupts as listed in the interrupt-names property. +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "csiphy0" + - "csiphy1" + - "csid0" + - "csid1" + - "ispif" + - "vfe0" +- power-domains: + Usage: required + Value type: <prop-encoded-array> + Definition: A phandle and power domain specifier pairs to the + power domain which is responsible for collapsing + and restoring power to the peripheral. +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and clock specifier pairs as listed + in clock-names property. +- clock-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "camss_top_ahb" + - "ispif_ahb" + - "csiphy0_timer" + - "csiphy1_timer" + - "csi0_ahb" + - "csi0" + - "csi0_phy" + - "csi0_pix" + - "csi0_rdi" + - "csi1_ahb" + - "csi1" + - "csi1_phy" + - "csi1_pix" + - "csi1_rdi" + - "camss_ahb" + - "camss_vfe_vfe" + - "camss_csi_vfe" + - "iface" + - "bus" +- vdda-supply: + Usage: required + Value type: <phandle> + Definition: A phandle to voltage supply for CSI2. +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + +* Nodes + +- ports: + Usage: required + Definition: As described in video-interfaces.txt in same directory. + Properties: + - reg: + Usage: required + Value type: <u32> + Definition: Selects CSI2 PHY interface - PHY0 or PHY1. + Endpoint node properties: + - clock-lanes: + Usage: required + Value type: <u32> + Definition: The physical clock lane index. The value + must always be <1> as the physical clock + lane is lane 1. + - data-lanes: + Usage: required + Value type: <prop-encoded-array> + Definition: An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. + +* An Example + + camss: camss@1b00000 { + compatible = "qcom,msm8916-camss"; + reg = <0x1b0ac00 0x200>, + <0x1b00030 0x4>, + <0x1b0b000 0x200>, + <0x1b00038 0x4>, + <0x1b08000 0x100>, + <0x1b08400 0x100>, + <0x1b0a000 0x500>, + <0x1b00020 0x10>, + <0x1b10000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + interrupts = <GIC_SPI 78 0>, + <GIC_SPI 79 0>, + <GIC_SPI 51 0>, + <GIC_SPI 52 0>, + <GIC_SPI 55 0>, + <GIC_SPI 57 0>; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + power-domains = <&gcc VFE_GDSC>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + clock-names = "camss_top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "camss_ahb", + "camss_vfe_vfe", + "camss_csi_vfe", + "iface", + "bus"; + vdda-supply = <&pm8916_l2>; + iommus = <&apps_iommu 3>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt index 39516b94c28f..0d8974aa8b38 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.txt +++ b/Documentation/devicetree/bindings/media/renesas,drif.txt @@ -40,6 +40,7 @@ To summarize, Required properties of an internal channel: ------------------------------------------- - compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. + "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt index 1b1a10ba48ce..6f3756da900f 100644 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt @@ -33,5 +33,4 @@ hdmicec: cec@100B0000 { hdmi-phandle = <&hdmi>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 922d6f8e74be..e4e15d8d7521 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -166,7 +166,6 @@ Example: clock-output-names = "cam_a_clkout", "cam_b_clkout"; pinctrl-names = "default"; pinctrl-0 = <&cam_port_a_clk_active>; - status = "okay"; #address-cells = <1>; #size-cells = <1>; @@ -189,7 +188,6 @@ Example: compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; interrupts = <0 85 0>; - status = "okay"; }; csis_0: csis@11880000 { diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index cc51b1fd6e0c..6af3fc210ecc 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -52,7 +52,6 @@ Example: c8sectpfe@08a20000 { compatible = "st,stih407-c8sectpfe"; - status = "okay"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt index df7182a63e59..e47c7ccc57f1 100644 --- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt @@ -59,7 +59,6 @@ I2C-connected TVP5147 decoder: tvp5147@5d { compatible = "ti,tvp5147"; reg = <0x5d>; - status = "okay"; port { composite_in: endpoint { diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 9cd2a369125d..852041a7480c 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -76,6 +76,11 @@ Optional endpoint properties mode horizontal and vertical synchronization signals are provided to the slave device (data source) by the master device (data sink). In the master mode the data source device is also the source of the synchronization signals. +- bus-type: data bus type. Possible values are: + 0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656) + 1 - MIPI CSI-2 C-PHY + 2 - MIPI CSI1 + 3 - CCP2 - bus-width: number of data lines actively used, valid for the parallel busses. - data-shift: on the parallel data busses, if bus-width is used to specify the number of data lines, data-shift can be used to specify which data lines are @@ -112,7 +117,8 @@ Optional endpoint properties should be the combined length of data-lanes and clock-lanes properties. If the lane-polarities property is omitted, the value must be interpreted as 0 (normal). This property is valid for serial busses only. - +- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used + with CCP2, for instance. Example ------- diff --git a/Documentation/devicetree/bindings/media/zx-irdec.txt b/Documentation/devicetree/bindings/media/zx-irdec.txt new file mode 100644 index 000000000000..295b9fab593e --- /dev/null +++ b/Documentation/devicetree/bindings/media/zx-irdec.txt @@ -0,0 +1,14 @@ +IR Decoder (IRDEC) on ZTE ZX family SoCs + +Required properties: + - compatible: Should be "zte,zx296718-irdec". + - reg: Physical base address and length of IRDEC registers. + - interrupts: Interrupt number of IRDEC. + +Exmaples: + + irdec: ir-decoder@111000 { + compatible = "zte,zx296718-irdec"; + reg = <0x111000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt index 1ee3bc09f319..8b9388cc1ccc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt @@ -130,7 +130,6 @@ The reg property implicitly specifies the chip select as this: Example: devbus-bootcs@d0010400 { - status = "okay"; ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */ #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt index 462819ac3da8..e6f168db6c72 100644 --- a/Documentation/devicetree/bindings/mfd/act8945a.txt +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -12,7 +12,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; active-semi,vsel-high; @@ -79,6 +78,5 @@ Example: active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt index eec40be7f79a..3f643ef121ff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -25,7 +25,6 @@ Example: clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt index 26eeed373934..1103ce2030fb 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be one of the following "atmel,at91sam9260-smc", "syscon" "atmel,sama5d3-smc", "syscon" + "atmel,sama5d2-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index aca09af66514..9455503b0299 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -7,7 +7,14 @@ axp209 (X-Powers) axp221 (X-Powers) axp223 (X-Powers) axp803 (X-Powers) +axp806 (X-Powers) axp809 (X-Powers) +axp813 (X-Powers) + +The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything +other than the packaging. Pins are routed separately. As such they should +be treated as separate entities. The other half is an AC100 RTC/codec +combo chip. Please see ./ac100.txt for its bindings. Required properties: - compatible: should be one of: @@ -19,6 +26,7 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp809" + * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin @@ -28,12 +36,14 @@ Required properties: Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/80X: range: 1800-4050, Default: 3 MHz + AXP22X/8XX: range: 1800-4050, Default: 3 MHz -- x-powers,drive-vbus-en: axp221 / axp223 only boolean, set this when the - N_VBUSEN pin is used as an output pin to control an external - regulator to drive the OTG VBus, rather then as an input pin - which signals whether the board is driving OTG VBus or not. +- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is + used as an output pin to control an external + regulator to drive the OTG VBus, rather then + as an input pin which signals whether the + board is driving OTG VBus or not. + (axp221 / axp223 / axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. @@ -171,6 +181,36 @@ LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on SW : On/Off Switch : swin-supply +AXP813 regulators, type, and corresponding input supply names: + +Regulator Type Supply Name Notes +--------- ---- ----------- ----- +DCDC1 : DC-DC buck : vin1-supply +DCDC2 : DC-DC buck : vin2-supply : poly-phase capable +DCDC3 : DC-DC buck : vin3-supply : poly-phase capable +DCDC4 : DC-DC buck : vin4-supply +DCDC5 : DC-DC buck : vin5-supply : poly-phase capable +DCDC6 : DC-DC buck : vin6-supply : poly-phase capable +DCDC7 : DC-DC buck : vin7-supply +ALDO1 : LDO : aldoin-supply : shared supply +ALDO2 : LDO : aldoin-supply : shared supply +ALDO3 : LDO : aldoin-supply : shared supply +DLDO1 : LDO : dldoin-supply : shared supply +DLDO2 : LDO : dldoin-supply : shared supply +DLDO3 : LDO : dldoin-supply : shared supply +DLDO4 : LDO : dldoin-supply : shared supply +ELDO1 : LDO : eldoin-supply : shared supply +ELDO2 : LDO : eldoin-supply : shared supply +ELDO3 : LDO : eldoin-supply : shared supply +FLDO1 : LDO : fldoin-supply : shared supply +FLDO2 : LDO : fldoin-supply : shared supply +FLDO3 : LDO : fldoin-supply : shared supply +LDO_IO0 : LDO : ips-supply : GPIO 0 +LDO_IO1 : LDO : ips-supply : GPIO 1 +RTC_LDO : LDO : ips-supply : always on +SW : On/Off Switch : swin-supply +DRIVEVBUS : Enable output : drivevbus-supply : external regulator + Example: axp209: pmic@34 { diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt new file mode 100644 index 000000000000..9ab216a851d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt @@ -0,0 +1,49 @@ +* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings + +Required properties: + - compatible : Should be "rohm,bd9571mwv". + - reg : I2C slave address. + - interrupt-parent : Phandle to the parent interrupt controller. + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : Marks the device node as an interrupt controller. + - #interrupt-cells : The number of cells to describe an IRQ, should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as trigger + masks from ../interrupt-controller/interrupts.txt. + - gpio-controller : Marks the device node as a GPIO Controller. + - #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - regulators: : List of child nodes that specify the regulator + initialization data. Child nodes must be named + after their hardware counterparts: + - vd09 + - vd18 + - vd25 + - vd33 + - dvfs + Each child node is defined using the standard + binding for regulators. + +Example: + + pmic: pmic@30 { + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt index 9554292dc6cb..07c69c0c6624 100644 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -4,6 +4,14 @@ Required properties: - compatible : Should be "dlg,da9052", "dlg,da9053-aa", "dlg,da9053-ab", or "dlg,da9053-bb" +Optional properties: +- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen + input lines are used as general purpose analogue + input. +- tsiref-supply: Phandle to the regulator, which provides the reference + voltage for the TSIREF pin. Must be provided when the + touchscreen pins are used for ADC purposes. + Sub-nodes: - regulators : Contain the regulator nodes. The DA9052/53 regulators are bound using their names as listed below: @@ -29,7 +37,6 @@ Sub-nodes: Examples: i2c@63fc8000 { /* I2C1 */ - status = "okay"; pmic: dialog@48 { compatible = "dlg,da9053-aa"; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 8aba48821a85..39ba4146769d 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ - status = "okay"; pmic: mc13892@0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt index 555fb117d4fa..755cbef0647d 100644 --- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt @@ -26,7 +26,6 @@ Example for i.MX23 SoC: compatible = "fsl,imx23-lradc"; reg = <0x80050000 0x2000>; interrupts = <36 37 38 39 40 41 42 43 44>; - status = "okay"; fsl,lradc-touchscreen-wires = <4>; fsl,ave-ctrl = <4>; fsl,ave-delay = <2>; @@ -39,7 +38,6 @@ Example for i.MX28 SoC: compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; - status = "okay"; fsl,lradc-touchscreen-wires = <5>; fsl,ave-ctrl = <4>; fsl,ave-delay = <2>; diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt new file mode 100644 index 000000000000..876242394a16 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/retu.txt @@ -0,0 +1,25 @@ +* Device tree bindings for Nokia Retu and Tahvo multi-function device + +Retu and Tahvo are a multi-function devices found on Nokia Internet +Tablets (770, N800 and N810). The Retu chip provides watchdog timer +and power button control functionalities while Tahvo chip provides +USB transceiver functionality. + +Required properties: +- compatible: "nokia,retu" or "nokia,tahvo" +- reg: Specifies the CBUS slave address of the ASIC chip +- interrupts: The interrupt line the device is connected to +- interrupt-parent: The parent interrupt controller + +Example: + +cbus0 { + compatible = "i2c-cbus-gpio"; + ... + retu: retu@1 { + compatible = "nokia,retu"; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + reg = <0x1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt index 9636ae8d8d41..91b65227afeb 100644 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/Documentation/devicetree/bindings/mfd/rk808.txt @@ -1,11 +1,14 @@ RK8XX Power Management Integrated Circuit The rk8xx family current members: +rk805 rk808 rk818 Required properties: -- compatible: "rockchip,rk808", "rockchip,rk818" +- compatible: "rockchip,rk805" +- compatible: "rockchip,rk808" +- compatible: "rockchip,rk818" - reg: I2C slave address - interrupt-parent: The parent interrupt controller. - interrupts: the interrupt outputs of the controller. @@ -18,6 +21,14 @@ Optional properties: - rockchip,system-power-controller: Telling whether or not this pmic is controlling the system power. +Optional RK805 properties: +- vcc1-supply: The input supply for DCDC_REG1 +- vcc2-supply: The input supply for DCDC_REG2 +- vcc3-supply: The input supply for DCDC_REG3 +- vcc4-supply: The input supply for DCDC_REG4 +- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 +- vcc6-supply: The input supply for LDO_REG3 + Optional RK808 properties: - vcc1-supply: The input supply for DCDC_REG1 - vcc2-supply: The input supply for DCDC_REG2 @@ -56,6 +67,15 @@ by a child node of the 'regulators' node. /* standard regulator bindings here */ }; +Following regulators of the RK805 PMIC regulators are supported. Note that +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO +number as described in RK805 datasheet. + + - DCDC_REGn + - valid values for n are 1 to 4. + - LDO_REGn + - valid values for n are 1 to 3 + Following regulators of the RK808 PMIC block are supported. Note that the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO number as described in RK808 datasheet. diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt index df664018c148..d759da606f75 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt @@ -57,7 +57,6 @@ audio-subsystem { clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; - status = "disabled"; }; serial_3: serial@11460000 { @@ -69,6 +68,5 @@ audio-subsystem { clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart_aud_bus>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt new file mode 100644 index 000000000000..2a9ff29db9c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt @@ -0,0 +1,48 @@ +STMicroelectronics STM32 Low-Power Timer + +The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several +functions: +- PWM output (with programmable prescaler, configurable polarity) +- Quadrature encoder, counter +- Trigger source for STM32 ADC/DAC (LPTIM_OUT) + +Required properties: +- compatible: Must be "st,stm32-lptimer". +- reg: Offset and length of the device's register set. +- clocks: Phandle to the clock used by the LP Timer module. +- clock-names: Must be "mux". +- #address-cells: Should be '<1>'. +- #size-cells: Should be '<0>'. + +Optional subnodes: +- pwm: See ../pwm/pwm-stm32-lp.txt +- counter: See ../iio/timer/stm32-lptimer-cnt.txt +- trigger: See ../iio/timer/stm32-lptimer-trigger.txt + +Example: + + timer@40002400 { + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&timer_clk>; + clock-names = "mux"; + #address-cells = <1>; + #size-cells = <0>; + + pwm { + compatible = "st,stm32-pwm-lp"; + pinctrl-names = "default"; + pinctrl-0 = <&lppwm1_pins>; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt new file mode 100644 index 000000000000..93602c7a19c8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -0,0 +1,17 @@ +* Device tree bindings for TI TPS61050/61052 Boost Converters + +The TP61050/TPS61052 is a high-power "white LED driver". The +device provides LED, GPIO and regulator functionalities. + +Required properties: +- compatible: "ti,tps61050" or "ti,tps61052" +- reg: Specifies the I2C slave address + +Example: + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt index 9f8b7430673c..505709403d3f 100644 --- a/Documentation/devicetree/bindings/mfd/wm831x.txt +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt @@ -31,6 +31,7 @@ Required properties: ../interrupt-controller/interrupts.txt Optional sub-nodes: + - phys : Contains a phandle to the USB PHY. - regulators : Contains sub-nodes for each of the regulators supplied by the device. The regulators are bound using their names listed below: diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt new file mode 100644 index 000000000000..088eff9ddb78 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -0,0 +1,39 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor + +RAVE Supervisory Processor communicates with SoC over UART. It is +expected that its Device Tree node is specified as a child of a node +corresponding to UART controller used for communication. + +Required parent device properties: + + - compatible: Should be one of: + - "zii,rave-sp-niu" + - "zii,rave-sp-mezz" + - "zii,rave-sp-esb" + - "zii,rave-sp-rdu1" + - "zii,rave-sp-rdu2" + + - current-speed: Should be set to baud rate SP device is using + +RAVE SP consists of the following sub-devices: + +Device Description +------ ----------- +rave-sp-wdt : Watchdog +rave-sp-nvmem : Interface to onborad EEPROM +rave-sp-backlight : Display backlight +rave-sp-hwmon : Interface to onboard hardware sensors +rave-sp-leds : Interface to onboard LEDs +rave-sp-input : Interface to onboard power button + +Example of usage: + + rdu { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; + diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index f8629bb73945..f9fb412642fe 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -47,5 +47,4 @@ ssc0: ssc@f0010000 { dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 49df630bd44f..60481bfc3d31 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -74,5 +74,4 @@ Example: phys = <&emmc_phy>; phy-names = "phy_arasan"; #clock-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt index e5a0140b2381..516fb0143d4c 100644 --- a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt @@ -24,7 +24,6 @@ mmc0: mmc@1c40000 { compatible = "ti,da830-mmc", reg = <0x40000 0x1000>; interrupts = <16>; - status = "okay"; bus-width = <4>; max-frequency = <50000000>; dmas = <&edma 16 diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt index db442355cd24..184ccffe2739 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt @@ -20,5 +20,4 @@ sdhci1: sdhci@10014000 { dma-names = "rx-tx"; bus-width = <4>; cd-gpios = <&gpio3 29>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt index a70fcd65b9ea..8d2d71758907 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-card.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt @@ -21,7 +21,6 @@ Example: vmmc-supply = <®_vcc3v3>; bus-width = <8>; non-removable; - status = "okay"; mmccard: mmccard@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index c7f4a0ec48ed..b32ade645ad9 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -153,7 +153,6 @@ mmc3: mmc@01c12000 { bus-width = <4>; non-removable; mmc-pwrseq = <&sdhci0_pwrseq> - status = "okay"; brcmf: bcrmf@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt index 84f0ebd67a13..10f0818a34c5 100644 --- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt +++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt @@ -13,5 +13,4 @@ Example: reg = <0xd00d4000 0x200>; interrupts = <54>; clocks = <&gateclk 17>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt index c32dc5a9dbe6..5ff1e12c655a 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -11,6 +11,8 @@ Required properties: - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs + - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs + - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs @@ -21,7 +23,7 @@ Required properties: - interrupts: Some SoCs have only 1 shared interrupt, while others have either 2 or 3 individual interrupts (error, int, card detect). Below is the number of interrupts for each SoC: - 1: r8a73a4, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794 + 1: r8a73a4, r8a7743, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794 2: r8a7740, sh73a0 3: r7s72100 diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index 49ed3ad2524a..c6558785e61b 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -15,6 +15,7 @@ Required Properties: - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 + - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 230fd696eb92..e35645598315 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -63,7 +63,6 @@ Example: mmc0: sdhci@fe81e000 { compatible = "st,sdhci"; - status = "disabled"; reg = <0xfe81e000 0x1000>; interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; interrupt-names = "mmcirq"; @@ -77,7 +76,6 @@ mmc0: sdhci@fe81e000 { mmc1: sdhci@09080000 { compatible = "st,sdhci-stih407", "st,sdhci"; - status = "disabled"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; @@ -94,7 +92,6 @@ mmc1: sdhci@09080000 { mmc0: sdhci@09060000 { compatible = "st,sdhci-stih407", "st,sdhci"; - status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 7d53a799f140..63b57e2a10fb 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -12,6 +12,7 @@ Required properties: * "allwinner,sun4i-a10-mmc" * "allwinner,sun5i-a13-mmc" * "allwinner,sun7i-a20-mmc" + * "allwinner,sun8i-a83t-emmc" * "allwinner,sun9i-a80-mmc" * "allwinner,sun50i-a64-emmc" * "allwinner,sun50i-a64-mmc" diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 4fd8b7acc510..54ef642f23a0 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -15,6 +15,8 @@ Required properties: "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC + "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC @@ -33,10 +35,8 @@ Required properties: If 2 clocks are specified by the hardware, you must name them as "core" and "cd". If the controller only has 1 clock, naming is not required. - Below is the number clocks for each supported SoC: - 1: SH73A0, R8A73A4, R8A7740, R8A7778, R8A7779, R8A7790 - R8A7791, R8A7792, R8A7793, R8A7794, R8A7795, R8A7796 - 2: R7S72100 + Devices which have more than 1 clock are listed below: + 2: R7S72100 Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt index 906819a90c2b..0f59bd5361f5 100644 --- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -28,5 +28,4 @@ Example: max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt index 489807005eda..b93c1e2f25dd 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt @@ -24,7 +24,6 @@ spi@f0020000 { #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; - status = "okay"; m25p80@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 5ded66ad7aef..840f9405dcf0 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -37,7 +37,6 @@ nor_flash: spi@1100d000 { clock-names = "spi", "sf"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; flash@0 { compatible = "jedec,spi-nor"; diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt index c2489391c437..54cef9ef3083 100644 --- a/Documentation/devicetree/bindings/mtd/st-fsm.txt +++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt @@ -21,6 +21,5 @@ Example: st,syscfg = <&syscfg_rear>; st,boot-device-reg = <0x958>; st,boot-device-spi = <0x1a>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index f322f56aef74..a37c67bcb43b 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -41,7 +41,6 @@ nfc: nand@01c03000 { #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; nand@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/anarion-gmac.txt b/Documentation/devicetree/bindings/net/anarion-gmac.txt new file mode 100644 index 000000000000..fe678965ae69 --- /dev/null +++ b/Documentation/devicetree/bindings/net/anarion-gmac.txt @@ -0,0 +1,25 @@ +* Adaptrum Anarion ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: + - compatible: Should be "adaptrum,anarion-gmac", "snps,dwmac" + - phy-mode: Should be "rgmii". Other modes are not currently supported. + + +Examples: + + gmac1: ethernet@f2014000 { + compatible = "adaptrum,anarion-gmac", "snps,dwmac"; + reg = <0xf2014000 0x4000>, <0xf2018100 8>; + + interrupt-parent = <&core_intc>; + interrupts = <21>; + interrupt-names = "macirq"; + + clocks = <&core_clk>; + clock-names = "stmmaceth"; + + phy-mode = "rgmii"; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ad16c1f481f7..0bfad656a9ff 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -27,5 +27,4 @@ amac0: ethernet@18022000 { <0x18110000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt new file mode 100644 index 000000000000..4194ff7e6ee6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -0,0 +1,35 @@ +Broadcom Bluetooth Chips +--------------------- + +This documents the binding structure and common properties for serial +attached Broadcom devices. + +Serial attached Broadcom devices shall be a child node of the host UART +device the slave device is attached to. + +Required properties: + + - compatible: should contain one of the following: + * "brcm,bcm43438-bt" + +Optional properties: + + - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - shutdown-gpios: GPIO specifier, used to enable the BT module + - device-wakeup-gpios: GPIO specifier, used to wakeup the controller + - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor + - clocks: clock specifier if external clock provided to the controller + - clock-names: should be "extclk" + + +Example: + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <921600>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index 01fa2d4188d4..9c5e663fa1af 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -29,7 +29,6 @@ Example: Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: &usb_host1_ehci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 9e331777c203..78138333ff7a 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -56,7 +56,6 @@ m_can1: can@020e8000 { <&clks IMX6SX_CLK_CANFD>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; - status = "disabled"; }; Board dts: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 0ab8b39d0b30..fd23904ac68e 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; id = <1>; - status = "okay"; ksz9477: ksz9477@0 { compatible = "microchip,ksz9477"; @@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: spi-cpha; spi-cpol; - status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 04f2965a4467..4448d063ddf6 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -27,7 +27,6 @@ Example: I2C managed mode: master: masterdevice@X { - status = "okay"; fixed-link { /* RMII fixed link to LAN9303 */ speed = <100>; @@ -38,7 +37,6 @@ I2C managed mode: switch: switch@a { compatible = "smsc,lan9303-i2c"; reg = <0xa>; - status = "okay"; reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; reset-duration = <200>; @@ -67,7 +65,6 @@ I2C managed mode: MDIO managed mode: master: masterdevice@X { - status = "okay"; phy-handle = <&switch>; mdio { diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 725f3b187886..000000000000 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: should be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: should be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: should be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: should be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- #address-cells: shall be 1 -- #size-cells: shall be 0 -- syscon: A phandle to the syscon of the SoC with one of the following - compatible string: - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - allwinner,sun8i-a83t-system-controller - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) -- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) -Both delay properties need to be a multiple of 100. They control the delay for -external PHY. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" should be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -Required properties of the phy node with the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY - -Example: - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt index c1ce1680246f..72e7aaf7242e 100644 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt @@ -30,6 +30,5 @@ Example: compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; - status = "okay"; use-ncsi; }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index ae4234ca4ee4..bedcfd5a52cd 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -41,7 +41,6 @@ ethernet@70000 { interrupts = <8>; clocks = <&gate_clk 4>; tx-csum-limit = <9800> - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; buffer-manager = <&bm>; diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 9be1059ff03f..3d27c68613a6 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in below example). &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; @@ -70,7 +69,6 @@ below example). Example for USB device: &usb_host1_ohci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt index c1b1d7c3bde1..07b31050dbe5 100644 --- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt +++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt @@ -31,7 +31,6 @@ bm: bm@c8000 { reg = <0xc8000 0xac>; clocks = <&gateclk 13>; internal-mem = <&bm_bppi>; - status = "okay"; pool2,capacity = <4096>; pool1,pkt-size = <512>; }; @@ -45,5 +44,4 @@ bm_bppi: bm-bppi { #address-cells = <1>; #size-cells = <1>; clocks = <&gateclk 13>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 6b4956beff8c..7e2dad08a12e 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -41,6 +41,11 @@ Optional properties (port): - marvell,loopback: port is loopback mode - phy: a phandle to a phy node defining the PHY address (as the reg property, a single integer). +- interrupt-names: if more than a single interrupt for rx is given, must + be the name associated to the interrupts listed. Valid + names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3", + "rx-shared", "link". +- marvell,system-controller: a phandle to the system controller. Example for marvell,armada-375-pp2: @@ -52,12 +57,10 @@ ethernet@f0000 { <0xc5000 0x100>; clocks = <&gateclk 3>, <&gateclk 19>; clock-names = "pp_clk", "gop_clk"; - status = "okay"; eth0: eth0@c4000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; - status = "okay"; phy = <&phy0>; phy-mode = "gmii"; }; @@ -65,7 +68,6 @@ ethernet@f0000 { eth1: eth1@c5000 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; - status = "okay"; phy = <&phy3>; phy-mode = "gmii"; }; @@ -80,19 +82,37 @@ cpm_ethernet: ethernet@0 { clock-names = "pp_clk", "gop_clk", "gp_clk"; eth0: eth0 { - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <0>; gop-port-id = <0>; }; eth1: eth1 { - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <1>; gop-port-id = <2>; }; eth2: eth2 { - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <2>; gop-port-id = <3>; }; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index c7194e87d5f4..1d1168b805cc 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -7,24 +7,30 @@ have dual GMAC each represented by a child node.. * Ethernet controller node Required properties: -- compatible: Should be "mediatek,mt2701-eth" +- compatible: Should be + "mediatek,mt2701-eth": for MT2701 SoC + "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC + "mediatek,mt7622-eth": for MT7622 SoC - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" + "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC + "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - power-domains: phandle to the power domain that the ethernet is part of - resets: Should contain a phandle to the ethsys reset signal - reset-names: Should contain the reset signal name "eth" - mediatek,ethsys: phandle to the syscon node that handles the port setup +- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup + which is required for those SoCs equipped with SGMII such as MT7622 SoC. - mediatek,pctl: phandle to the syscon node that handles the ports slew rate and driver current Optional properties: - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - * Ethernet MAC node Required properties: diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index 0703ad3f3c1e..354dd9896bb5 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -66,5 +66,4 @@ Example for GXBB: <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index c35b5b428a7f..42a248301615 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -69,7 +69,6 @@ Examples: }; }; ethernet@70000 { - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt index 1dc3bc75539d..44dff53d4dda 100644 --- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq): compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>; - status = "okay"; enc28j60: ethernet@0 { compatible = "microchip,enc28j60"; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 76df9173825a..c9b35251bb20 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -25,7 +25,6 @@ Optional I2C-based chip specific properties: Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { - status = "okay"; nfcmrvluart: nfcmrvluart@5 { compatible = "marvell,nfc-uart"; @@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): &i2c1 { - status = "okay"; clock-frequency = <400000>; nfcmrvli2c0: i2c@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index 5b6cd9b3f628..92486733df71 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): &i2c2 { - status = "okay"; npc100: npc100@29 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt index 1aea822d4530..122460e42e3c 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt @@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2): &i2c2 { - status = "okay"; pn532: pn532@24 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index dab69f36167c..538a86f7b2b0 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): &i2c2 { - status = "okay"; pn544: pn544@28 { diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt index fb1e75facf1b..ed5b3eaadb39 100644 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -12,7 +12,6 @@ Required properties: Example: &hsi2c_4 { - status = "okay"; s3fwrn5@27 { compatible = "samsung,s3fwrn5-i2c"; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index 263732e8879f..b46d473be425 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): &i2c2 { - status = "okay"; st21nfcb: st21nfcb@8 { diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt index 711ca85a363d..54ce8e7ac681 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): &mcspi4 { - status = "okay"; st21nfcb: st21nfcb@0 { diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt index 7bb2e213d6f9..5ee9440fa9ad 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): &i2c2 { - status = "okay"; st21nfca: st21nfca@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt index ea3178bc9ddd..08a202e00d47 100644 --- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt +++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt @@ -35,12 +35,10 @@ spi@9840000 { #address-cells = <1>; #size-cells = <0>; cs-gpios = <&pio0 4>; - status = "okay"; st95hf@0{ reg = <0>; compatible = "st,st95hf"; - status = "okay"; spi-max-frequency = <1000000>; enable-gpio = <&pio4 0>; interrupt-parent = <&pio0>; diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 60c833d62181..5ca9362ef127 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -23,7 +23,6 @@ Optional SoC Specific Properties: Example (for ARM-based BeagleBone with TRF7970A on SPI1): &spi1 { - status = "okay"; nfc@0 { compatible = "ti,trf7970a"; @@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): irq-status-read-quirk; en2-rf-quirk; clock-frequency = <27120000>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt index df0534e2eda1..d7117a22fd87 100644 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt @@ -35,5 +35,4 @@ etha: ethernet@40400000 { /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index b55857696fc3..77d0b2a61ffa 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -2,11 +2,7 @@ PHY nodes Required properties: - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : interrupt specifier for the sole interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer @@ -52,11 +48,16 @@ Optional Properties: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. +- phy-is-integrated: If set, indicates that the PHY is integrated into the same + physical package as the Ethernet MAC. If needed, muxers should be configured + to ensure the integrated PHY is used. The absence of this property indicates + the muxers should be configured so that the external PHY is used. + Example: ethernet-phy@0 { compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <40000>; - interrupts = <35 1>; + interrupt-parent = <&PIC>; + interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 6d9efb2eb9a5..3987846b3fd3 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -41,7 +41,6 @@ ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; - status = "okay"; qca7000: ethernet@0 { compatible = "qca,qca7000"; @@ -78,7 +77,6 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; pinctrl-names = "default"; pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; qca7000: ethernet { compatible = "qca,qca7000"; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index b519503be51a..16723535e1aa 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -4,19 +4,25 @@ This file provides information on what the device node for the Ethernet AVB interface contains. Required properties: -- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC. - "renesas,etheravb-r8a7791" if the device is a part of R8A7791 SoC. - "renesas,etheravb-r8a7792" if the device is a part of R8A7792 SoC. - "renesas,etheravb-r8a7793" if the device is a part of R8A7793 SoC. - "renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC. - "renesas,etheravb-r8a7796" if the device is a part of R8A7796 SoC. - "renesas,etheravb-rcar-gen2" for generic R-Car Gen 2 compatible interface. - "renesas,etheravb-rcar-gen3" for generic R-Car Gen 3 compatible interface. +- compatible: Must contain one or more of the following: + - "renesas,etheravb-r8a7743" for the R8A7743 SoC. + - "renesas,etheravb-r8a7745" for the R8A7745 SoC. + - "renesas,etheravb-r8a7790" for the R8A7790 SoC. + - "renesas,etheravb-r8a7791" for the R8A7791 SoC. + - "renesas,etheravb-r8a7792" for the R8A7792 SoC. + - "renesas,etheravb-r8a7793" for the R8A7793 SoC. + - "renesas,etheravb-r8a7794" for the R8A7794 SoC. + - "renesas,etheravb-rcar-gen2" as a fallback for the above + R-Car Gen2 and RZ/G1 devices. - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. + - "renesas,etheravb-r8a7795" for the R8A7795 SoC. + - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-rcar-gen3" as a fallback for the above + R-Car Gen3 devices. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed by + the generic version. - reg: offset and length of (1) the register block and (2) the stream buffer. - interrupts: A list of interrupt-specifiers, one for each entry in diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 8f427550720a..6af8eed1adeb 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -10,6 +10,7 @@ Required properties: "rockchip,rk3366-gmac": found on RK3366 SoCs "rockchip,rk3368-gmac": found on RK3368 SoCs "rockchip,rk3399-gmac": found on RK3399 SoCs + "rockchip,rv1108-gmac": found on RV1108 SoCs - reg: addresses and length of the register sets for the device. - interrupts: Should contain the GMAC interrupts. - interrupt-names: Should contain the interrupt names "macirq". @@ -70,5 +71,4 @@ gmac: ethernet@ff290000 { tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 974edd5c85cc..8b7c719b0bb9 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board. pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethernetphy0: ethernet-phy@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 2e68a3cd8513..b30d04b54ee9 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 { gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; - status = "disabled"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index d05c1e1fd9b6..062c5174add3 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -34,7 +34,6 @@ Example: ethernet0: dwmac@9630000 { device_type = "network"; - status = "disabled"; compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; reg = <0x9630000 0x8000>; reg-names = "stmmaceth"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index c35afb7e956a..489dbcb66c5a 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -18,7 +18,6 @@ Example: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - status = "disabled"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; interrupts = <0 61 0>, <0 62 0>; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 590f622188de..b2bd4704f859 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -29,7 +29,6 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; - status = "okay"; brcmf: wifi@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt index 19331bb4ff6e..6830c4786f8a 100644 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt @@ -21,7 +21,6 @@ Example: mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; - status = "okay"; esp8089: sdio_wifi@1 { compatible = "esp,esp8089"; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 0854451ff91d..59de8646862d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured so that firmware can wakeup host using this device side pin. &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt index 7b2cbb14113e..f42f6b0f1bc7 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added. Example: &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt new file mode 100644 index 000000000000..38f9ec076743 --- /dev/null +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -0,0 +1,55 @@ +XILINX AXI ETHERNET Device Tree Bindings +-------------------------------------------------------- + +Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core +provides connectivity to an external ethernet PHY supporting different +interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two +segments of memory for buffering TX and RX, as well as the capability of +offloading TX/RX checksum calculation off the processor. + +Management configuration is done through the AXI interface, while payload is +sent and received through means of an AXI DMA controller. This driver +includes the DMA driver code, so this driver is incompatible with AXI DMA +driver. + +For more details about mdio please refer phy.txt file in the same directory. + +Required properties: +- compatible : Must be one of "xlnx,axi-ethernet-1.00.a", + "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" +- reg : Address and length of the IO space. +- interrupts : Should be a list of two interrupt, TX and RX. +- phy-handle : Should point to the external phy device. + See ethernet.txt file in the same directory. +- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware + +Optional properties: +- phy-mode : See ethernet.txt +- xlnx,phy-type : Deprecated, do not use, but still accepted in preference + to phy-mode. +- xlnx,txcsum : 0 or empty for disabling TX checksum offload, + 1 to enable partial TX checksum offload, + 2 to enable full TX checksum offload +- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload + +Example: + axi_ethernet_eth: ethernet@40c00000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + device_type = "network"; + interrupt-parent = <µblaze_0_axi_intc>; + interrupts = <2 0>; + phy-mode = "mii"; + reg = <0x40c00000 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy0>; + axi_ethernetlite_0_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: phy@0 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index 74cf52908a6c..0668c45a156d 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -3,7 +3,10 @@ This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs. Required properties: -- compatible: should be "mediatek,mt8173-efuse" or "mediatek,efuse" +- compatible: should be + "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622 + "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623 + "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt index daebce9e6b07..372c72fd64dc 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt @@ -21,5 +21,4 @@ Example for i.MX28: #size-cells = <1>; reg = <0x8002c000 0x2000>; clocks = <&clks 25>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index e36d261b9ba6..9d733af26be7 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -464,7 +464,6 @@ Example 5: opp-supported-hw opp_table { compatible = "operating-points-v2"; - status = "okay"; opp-shared; opp-600000000 { diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt index 35a465362408..b9165b72473c 100644 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -1,11 +1,11 @@ * Freescale 83xx and 512x PCI bridges -Freescale 83xx and 512x SOCs include the same pci bridge core. +Freescale 83xx and 512x SOCs include the same PCI bridge core. 83xx/512x specific notes: - reg: should contain two address length tuples - The first is for the internal pci bridge registers - The second is for the pci config space access registers + The first is for the internal PCI bridge registers + The second is for the PCI config space access registers Example (MPC8313ERDB) pci0: pci@e0008500 { diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt index bbcd9f4c501f..310ef7145c47 100644 --- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt +++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt @@ -33,7 +33,6 @@ Example: pcie0: pcie@d0070000 { compatible = "marvell,armada-3700-pcie"; device_type = "pci"; - status = "disabled"; reg = <0 0xd0070000 0 0x20000>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 2951a6a50704..495880193adc 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -7,21 +7,21 @@ Required properties: "Txs": TX slave port region "Cra": Control register access region - interrupt-parent: interrupt source phandle. -- interrupts: specifies the interrupt source of the parent interrupt controller. - The format of the interrupt specifier depends on the parent interrupt - controller. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends + on the parent interrupt controller. - device_type: must be "pci" - #address-cells: set to <3> -- #size-cells: set to <2> +- #size-cells: set to <2> - #interrupt-cells: set to <1> -- ranges: describes the translation of addresses for root ports and standard - PCI regions. +- ranges: describes the translation of addresses for root ports and + standard PCI regions. - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. Optional properties: -- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe - controller. +- msi-parent: Link to the hardware entity that serves as the MSI controller + for this PCIe controller. - bus-range: PCI bus numbers covered Example @@ -45,5 +45,5 @@ Example <0 0 0 3 &pcie_0 3>, <0 0 0 4 &pcie_0 4>; ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 - 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt index 5ecaea1e6eee..4e4aee4439ea 100644 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt @@ -6,7 +6,7 @@ and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "axis,artpec6-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller (DBI), - the phy controller, and configuration address space. + the PHY controller, and configuration address space. - reg-names: Must include the following entries: - "dbi" - "phy" diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index b2480dd38c11..1da7ade3183c 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,4 +1,4 @@ -* Synopsys Designware PCIe interface +* Synopsys DesignWare PCIe interface Required properties: - compatible: should contain "snps,dw-pcie" to identify the core. @@ -17,29 +17,27 @@ RC mode: properties to define the mapping of the PCIe interface to interrupt numbers. EP mode: -- num-ib-windows: number of inbound address translation - windows -- num-ob-windows: number of outbound address translation - windows +- num-ib-windows: number of inbound address translation windows +- num-ob-windows: number of outbound address translation windows Optional properties: - num-lanes: number of lanes to use (this property should be specified unless the link is brought already up in BIOS) -- reset-gpio: gpio pin number of power good signal +- reset-gpio: GPIO pin number of power good signal - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - "pcie" - "pcie_bus" RC mode: -- num-viewport: number of view ports configured in - hardware. If a platform does not specify it, the driver assumes 2. -- bus-range: PCI bus numbers covered (it is recommended - for new devicetrees to specify this property, to keep backwards - compatibility a range of 0x00-0xff is assumed if not present) +- num-viewport: number of view ports configured in hardware. If a platform + does not specify it, the driver assumes 2. +- bus-range: PCI bus numbers covered (it is recommended for new devicetrees + to specify this property, to keep backwards compatibility a range of + 0x00-0xff is assumed if not present) + EP mode: -- max-functions: maximum number of functions that can be - configured +- max-functions: maximum number of functions that can be configured Example configuration: diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index cf92d3ba5a26..7b1e48bf172b 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -1,6 +1,6 @@ * Freescale i.MX6 PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index a339dbb15493..bdb7ab39d2d7 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -1,7 +1,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description -HiSilicon PCIe host controller is based on Designware PCI core. -It shares common functions with PCIe Designware core driver and inherits +HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt. @@ -40,7 +40,6 @@ Hip05 Example (note that Hip06 is the same except compatible): 0x0 0 0 2 &mbigen_pcie 2 11 0x0 0 0 3 &mbigen_pcie 3 12 0x0 0 0 4 &mbigen_pcie 4 13>; - status = "ok"; }; HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. @@ -83,5 +82,4 @@ Example: 0x0 0 0 2 &mbigen_pcie0 650 4 0x0 0 0 3 &mbigen_pcie0 650 4 0x0 0 0 4 &mbigen_pcie0 650 4>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 68ffa0fbcd73..6e217c63123d 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -1,8 +1,8 @@ HiSilicon Kirin SoCs PCIe host DT description -Kirin PCIe host controller is based on Designware PCI core. -It shares common functions with PCIe Designware core driver -and inherits common properties defined in +Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and +inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt. Additional properties are described here: @@ -16,7 +16,7 @@ Required properties "apb": apb Ctrl register defined by Kirin; "phy": apb PHY register defined by Kirin; "config": PCIe configuration space registers. -- reset-gpios: The gpio to generate PCIe perst assert and deassert signal. +- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. Optional properties: diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index ee1c72d5162e..c0484da0f20d 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -15,8 +15,10 @@ Required properties: - compatible: should contain the platform identifier such as: "fsl,ls1021a-pcie", "snps,dw-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" + "fsl,ls2088a-pcie" + "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" -- reg: base addresses and lengths of the PCIe controller +- reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt deleted file mode 100644 index fe80dda9bf73..000000000000 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt +++ /dev/null @@ -1,130 +0,0 @@ -MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs - -PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root -ports supports a Gen2 1-lane Link and has PIPE interface to PHY. - -Required properties: -- compatible: Should contain "mediatek,mt7623-pcie". -- device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe controller. -- #address-cells: Address representation for root ports (must be 3) -- #size-cells: Size representation for root ports (must be 2) -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - free_ck :for reference clock of PCIe subsys - - sys_ck0 :for clock of Port0 - - sys_ck1 :for clock of Port1 - - sys_ck2 :for clock of Port2 -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - pcie-rst0 :port0 reset - - pcie-rst1 :port1 reset - - pcie-rst2 :port2 reset -- phys: List of PHY specifiers (used by generic PHY framework). -- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of PHYs as specified in *phys* property. -- power-domains: A phandle and power domain specifier pair to the power domain - which is responsible for collapsing and restoring power to the peripheral. -- bus-range: Range of bus numbers associated with this controller. -- ranges: Ranges for the PCI memory and I/O regions. - -In addition, the device tree node must have sub-nodes describing each -PCIe port interface, having the following mandatory properties: - -Required properties: -- device_type: Must be "pci" -- reg: Only the first four bytes are used to refer to the correct bus number - and device number. -- #address-cells: Must be 3 -- #size-cells: Must be 2 -- #interrupt-cells: Must be 1 -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- ranges: Sub-ranges distributed from the PCIe controller node. An empty - property is sufficient. -- num-lanes: Number of lanes to use for this port. - -Examples: - - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pcie: pcie-controller@1a140000 { - compatible = "mediatek,mt7623-pcie"; - device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ - <0 0x1a142000 0 0x1000>, /* Port0 registers */ - <0 0x1a143000 0 0x1000>, /* Port1 registers */ - <0 0x1a144000 0 0x1000>; /* Port2 registers */ - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 0>; - interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, - <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, - <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <&hifsys CLK_HIFSYS_PCIE0>, - <&hifsys CLK_HIFSYS_PCIE1>, - <&hifsys CLK_HIFSYS_PCIE2>; - clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; - resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, - <&hifsys MT2701_HIFSYS_PCIE1_RST>, - <&hifsys MT2701_HIFSYS_PCIE2_RST>; - reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; - phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>; - phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; - bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ - 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ - - pcie@0,0 { - device_type = "pci"; - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; - ranges; - num-lanes = <1>; - }; - - pcie@1,0 { - device_type = "pci"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - ranges; - num-lanes = <1>; - }; - - pcie@2,0 { - device_type = "pci"; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - ranges; - num-lanes = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt new file mode 100644 index 000000000000..3a6ce55dd310 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -0,0 +1,284 @@ +MediaTek Gen2 PCIe controller + +Required properties: +- compatible: Should contain one of the following strings: + "mediatek,mt2701-pcie" + "mediatek,mt2712-pcie" + "mediatek,mt7622-pcie" + "mediatek,mt7623-pcie" +- device_type: Must be "pci" +- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg-names: Names of the above areas to use during resource lookup. +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: + Mandatory entries: + - sys_ckN :transaction layer and data link layer clock + Required entries for MT2701/MT7623: + - free_ck :for reference clock of PCIe subsys + Required entries for MT2712/MT7622: + - ahb_ckN :AHB slave interface operating clock for CSR access and RC + initiated MMIO access + Required entries for MT7622: + - axi_ckN :application layer MMIO channel operating clock + - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when + pcie_mac_ck/pcie_pipe_ck is turned off + - obff_ckN :OBFF functional block operating clock + - pipe_ckN :LTSSM and PHY/MAC layer operating clock + where N starting from 0 to one less than the number of root ports. +- phys: List of PHY specifiers (used by generic PHY framework). +- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. +- power-domains: A phandle and power domain specifier pair to the power domain + which is responsible for collapsing and restoring power to the peripheral. +- bus-range: Range of bus numbers associated with this controller. +- ranges: Ranges for the PCI memory and I/O regions. + +Required properties for MT7623/MT2701: +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the + number of root ports. + +Required properties for MT2712/MT7622: +-interrupts: A list of interrupt outputs of the controller, must have one + entry for each PCIe port + +In addition, the device tree node must have sub-nodes describing each +PCIe port interface, having the following mandatory properties: + +Required properties: +- device_type: Must be "pci" +- reg: Only the first four bytes are used to refer to the correct bus number + and device number. +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- #interrupt-cells: Must be 1 +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- num-lanes: Number of lanes to use for this port. + +Examples for MT7623: + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie-controller@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + }; + +Examples for MT2712: + pcie: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>, + <0 0x112ff000 0 0x1000>; + reg-names = "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, + <&pericfg CLK_PERI_PCIE0>, + <&pericfg CLK_PERI_PCIE1>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + +Examples for MT7622: + pcie: pcie@1a140000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, + <0 0x1a143000 0 0x1000>, + <0 0x1a145000 0 0x1000>; + reg-names = "subsys", "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, + <&pciesys CLK_PCIE_P1_MAC_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AHB_EN>, + <&pciesys CLK_PCIE_P0_AUX_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P0_AXI_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P0_OBFF_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P0_PIPE_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", + "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", + "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 2de6f65ecfb1..127ae1f53e5a 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -77,7 +77,7 @@ and the following optional properties: - marvell,pcie-lane: the physical PCIe lane number, for ports having multiple lanes. If this property is not found, we assume that the value is 0. -- reset-gpios: optional gpio to PERST# +- reset-gpios: optional GPIO to PERST# - reset-delay-us: delay in us to wait after reset de-assertion, if not specified will default to 100ms, as required by the PCIe specification. @@ -85,7 +85,6 @@ Example: pcie-controller { compatible = "marvell,armada-xp-pcie"; - status = "disabled"; device_type = "pci"; #address-cells = <3>; @@ -147,7 +146,6 @@ pcie-controller { /* wait 20ms for device settle after reset deassertion */ reset-delay-us = <20000>; clocks = <&gateclk 5>; - status = "disabled"; }; pcie@2,0 { @@ -164,7 +162,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; - status = "disabled"; }; pcie@3,0 { @@ -181,7 +178,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; - status = "disabled"; }; pcie@4,0 { @@ -198,7 +194,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; - status = "disabled"; }; pcie@5,0 { @@ -215,7 +210,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; - status = "disabled"; }; pcie@6,0 { @@ -232,7 +226,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; - status = "disabled"; }; pcie@7,0 { @@ -249,7 +242,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; - status = "disabled"; }; pcie@8,0 { @@ -266,7 +258,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; - status = "disabled"; }; pcie@9,0 { @@ -283,7 +274,6 @@ pcie-controller { marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; - status = "disabled"; }; pcie@10,0 { @@ -300,6 +290,5 @@ pcie-controller { marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 27>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt index 598533a57d79..c1e4c3d10a74 100644 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -1,6 +1,6 @@ * Marvell Armada 7K/8K PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: @@ -34,5 +34,4 @@ Example: interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clocks = <&cpm_syscon0 1 13>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index d08a4d51108f..7e05487544ed 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -1,12 +1,12 @@ TI Keystone PCIe interface -Keystone PCI host Controller is based on Designware PCI h/w version 3.65. -It shares common functions with PCIe Designware core driver and inherit -common properties defined in +Keystone PCI host Controller is based on the Synopsys DesignWare PCI +hardware version 3.65. It shares common functions with the PCIe DesignWare +core driver and inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt -for the details of Designware DT bindings. Additional properties are +for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. Required Properties:- @@ -52,13 +52,12 @@ pcie_intc: Interrupt controller device node for Legacy IRQ chip }; Optional properties:- - phys: phandle to Generic Keystone SerDes phy for PCI - phy-names: name of the Generic Keystine SerDes phy for PCI + phys: phandle to generic Keystone SerDes PHY for PCI + phy-names: name of the generic Keystone SerDes PHY for PCI - If boot loader already does PCI link establishment, then phys and phy-names shouldn't be present. interrupts: platform interrupt for error interrupts. -Designware DT Properties not applicable for Keystone PCI +DesignWare DT Properties not applicable for Keystone PCI 1. pcie_bus clock-names not used. Instead, a phandle to phys is used. - diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 07a75094c5a8..3d038638612b 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -6,11 +6,14 @@ AHB. There is one bridge instance per USB port connected to the internal OHCI and EHCI controllers. Required properties: -- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC; +- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC; + "renesas,pci-r8a7745" for the R8A7745 SoC; + "renesas,pci-r8a7790" for the R8A7790 SoC; "renesas,pci-r8a7791" for the R8A7791 SoC; "renesas,pci-r8a7793" for the R8A7793 SoC; "renesas,pci-r8a7794" for the R8A7794 SoC; - "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device + "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or + RZ/G1 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt index 50f9e2ca5b13..c77981c5dd18 100644 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -1,12 +1,12 @@ PCI bus bridges have standardized Device Tree bindings: PCI Bus Binding to: IEEE Std 1275-1994 -http://www.firmware.org/1275/bindings/pci/pci2_1.pdf +http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf And for the interrupt mapping part: Open Firmware Recommended Practice: Interrupt Mapping -http://www.firmware.org/1275/practice/imap/imap0_9d.pdf +http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf Additionally to the properties specified in the above standards a host bridge driver implementation may support the following properties: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 9d418b71774f..3c9d321b3d3b 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -9,6 +9,7 @@ - "qcom,pcie-apq8084" for apq8084 - "qcom,pcie-msm8996" for msm8996 or apq8096 - "qcom,pcie-ipq4019" for ipq4019 + - "qcom,pcie-ipq8074" for ipq8074 - reg: Usage: required @@ -20,7 +21,7 @@ Value type: <stringlist> Definition: Must include the following entries - "parf" Qualcomm specific registers - - "dbi" Designware PCIe registers + - "dbi" DesignWare PCIe registers - "elbi" External local bus interface registers - "config" PCIe configuration space @@ -105,6 +106,16 @@ - "bus_master" Master AXI clock - "bus_slave" Slave AXI clock +- clock-names: + Usage: required for ipq8074 + Value type: <stringlist> + Definition: Should contain the following entries + - "iface" PCIe to SysNOC BIU clock + - "axi_m" AXI Master clock + - "axi_s" AXI Slave clock + - "ahb" AHB clock + - "aux" Auxiliary clock + - resets: Usage: required Value type: <prop-encoded-array> @@ -144,6 +155,18 @@ - "ahb" AHB reset - "phy_ahb" PHY AHB reset +- reset-names: + Usage: required for ipq8074 + Value type: <stringlist> + Definition: Should contain the following entries + - "pipe" PIPE reset + - "sleep" Sleep reset + - "sticky" Core Sticky reset + - "axi_m" AXI Master reset + - "axi_s" AXI Slave reset + - "ahb" AHB Reset + - "axi_m_sticky" AXI Master Sticky reset + - power-domains: Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> @@ -180,7 +203,7 @@ - <name>-gpios: Usage: optional Value type: <prop-encoded-array> - Definition: List of phandle and gpio specifier pairs. Should contain + Definition: List of phandle and GPIO specifier pairs. Should contain - "perst-gpios" PCIe endpoint reset signal line - "wake-gpios" PCIe endpoint wake signal line diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt index 8e0a1eb0acbb..a04ab1b76211 100644 --- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt +++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt @@ -71,7 +71,7 @@ - interrupt-map: standard PCI properties to define the mapping of the PCI interface to interrupt numbers. - The PCI host bridge node migh have additional sub-nodes representing + The PCI host bridge node might have additional sub-nodes representing the onboard PCI devices/PCI slots. Each such sub-node must have the following mandatory properties: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index bd27428dda61..76ba3a61d1a3 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -14,7 +14,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; SoC-specific version corresponding to the platform first followed by the generic version. -- reg: base address and length of the pcie controller registers. +- reg: base address and length of the PCIe controller registers. - #address-cells: set to <3> - #size-cells: set to <2> - bus-range: PCI bus numbers covered @@ -25,15 +25,14 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; source for hardware related interrupts (e.g. link speed change). - #interrupt-cells: set to <1> - interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt - numbers. + to define the mapping of the PCIe interface to interrupt numbers. - clocks: from common clock binding: clock specifiers for the PCIe controller and PCIe bus clocks. - clock-names: from common clock binding: should be "pcie" and "pcie_bus". Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie: pcie@fe000000 { compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; @@ -54,5 +53,4 @@ SoC specific DT Entry: interrupt-map = <0 0 0 0 &gic 0 116 4>; clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index 1453a734c2f5..af34c65773fd 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -19,8 +19,6 @@ Required properties: - "pm" - msi-map: Maps a Requester ID to an MSI controller and associated msi-specifier data. See ./pci-msi.txt -- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. -- phy-names: MUST be "pcie-phy". - interrupts: Three interrupt entries must be specified. - interrupt-names: Must include the following names - "sys" @@ -42,11 +40,24 @@ Required properties: interrupt source. The value must be 1. - interrupt-map-mask and interrupt-map: standard PCI properties +Required properties for legacy PHY model (deprecated): +- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. +- phy-names: MUST be "pcie-phy". + +Required properties for per-lane PHY model (preferred): +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include 4 entries for all 4 lanes even if some of + them won't be used for your cases. Entries are of the form "pcie-phy-N": + where N ranges from 0 to 3. + (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt + for changing the #phy-cells of phy node to support it) + Optional Property: - aspm-no-l0s: RC won't support ASPM L0s. This property is needed if using 24MHz OSC for RC's PHY. -- ep-gpios: contain the entry for pre-reset gpio +- ep-gpios: contain the entry for pre-reset GPIO - num-lanes: number of lanes to use +- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe. - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. - vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. - vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe. @@ -95,6 +106,7 @@ pcie0: pcie@f8000000 { <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; + /* deprecated legacy PHY model */ phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; @@ -111,3 +123,13 @@ pcie0: pcie@f8000000 { #interrupt-cells = <1>; }; }; + +pcie0: pcie@f8000000 { + ... + + /* preferred per-lane PHY model */ + phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; + + ... +}; diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt index 7d3b09474657..34a11bfbfb60 100644 --- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt +++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt @@ -1,29 +1,29 @@ * Samsung Exynos 5440 PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "samsung,exynos5440-pcie" -- reg: base addresses and lengths of the pcie controller, - the phy controller, additional register for the phy controller. - (Registers for the phy controller are DEPRECATED. +- reg: base addresses and lengths of the PCIe controller, + the PHY controller, additional register for the PHY controller. + (Registers for the PHY controller are DEPRECATED. Use the PHY framework.) - reg-names : First name should be set to "elbi". - And use the "config" instead of getting the confgiruation address space + And use the "config" instead of getting the configuration address space from "ranges". - NOTE: When use the "config" property, reg-names must be set. + NOTE: When using the "config" property, reg-names must be set. - interrupts: A list of interrupt outputs for level interrupt, pulse interrupt, special interrupt. -- phys: From PHY binding. Phandle for the Generic PHY. +- phys: From PHY binding. Phandle for the generic PHY. Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt -Other common properties refer to - Documentation/devicetree/binding/pci/designware-pcie.txt +For other common properties, refer to + Documentation/devicetree/bindings/pci/designware-pcie.txt Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie@290000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; @@ -83,7 +83,7 @@ With using PHY framework: ... }; -Board specific DT Entry: +Board-specific DT Entry: pcie@290000 { reset-gpio = <&pin_ctrl 5 0>; diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt index 49ea76da7718..d5a14f5dad46 100644 --- a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt +++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt @@ -1,12 +1,12 @@ SPEAr13XX PCIe DT detail: ================================ -SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy +SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY controller. Required properties: -- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". -- phys : phandle to phy node associated with pcie controller +- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". +- phys : phandle to PHY node associated with PCIe controller - phy-names : must be "pcie-phy" - All other definitions as per generic PCI bindings diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 6a07c96227e0..7f7af3044016 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -1,6 +1,6 @@ TI PCI Controllers -PCIe Designware Controller +PCIe DesignWare Controller - compatible: Should be "ti,dra7-pcie" for RC Should be "ti,dra7-pcie-ep" for EP - phys : list of PHY specifiers (used by generic PHY framework) @@ -13,7 +13,7 @@ PCIe Designware Controller HOST MODE ========= - reg : Two register ranges as listed in the reg-names property - - reg-names : The first entry must be "ti-conf" for the TI specific registers + - reg-names : The first entry must be "ti-conf" for the TI-specific registers The second entry must be "rc-dbics" for the DesignWare PCIe registers The third entry must be "config" for the PCIe configuration space @@ -30,7 +30,7 @@ HOST MODE DEVICE MODE =========== - reg : Four register ranges as listed in the reg-names property - - reg-names : "ti-conf" for the TI specific registers + - reg-names : "ti-conf" for the TI-specific registers "ep_dbics" for the standard configuration registers as they are locally accessed within the DIF CS space "ep_dbics2" for the standard configuration registers as @@ -46,7 +46,7 @@ DEVICE MODE access. Optional Property: - - gpios : Should be added if a gpio line is required to drive PERST# line + - gpios : Should be added if a GPIO line is required to drive PERST# line NOTE: Two DT nodes may be added for each PCI controller; one for host mode and another for device mode. So in order for PCI to diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt index ebd1e7d0403e..0a702b13d2ac 100644 --- a/Documentation/devicetree/bindings/pci/versatile.txt +++ b/Documentation/devicetree/bindings/pci/versatile.txt @@ -5,7 +5,7 @@ PCI host controller found on the ARM Versatile PB board's FPGA. Required properties: - compatible: should contain "arm,versatile-pci" to identify the Versatile PCI controller. -- reg: base addresses and lengths of the pci controller. There must be 3 +- reg: base addresses and lengths of the PCI controller. There must be 3 entries: - Versatile-specific registers - Self Config space diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt index 36d881c8e6d4..85d9b95234f7 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -4,7 +4,7 @@ Required properties: - compatible: should be "apm,xgene1-msi" to identify X-Gene v1 PCIe MSI controller block. -- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node - reg: physical base address (0x79000000) and length (0x900000) for controller registers. These registers include the MSI termination address and data registers as well as the MSI interrupt status registers. @@ -13,7 +13,8 @@ Required properties: interrupt number 0x10 to 0x1f. - interrupt-names: not required -Each PCIe node needs to have property msi-parent that points to msi controller node +Each PCIe node needs to have property msi-parent that points to an MSI +controller node Examples: @@ -44,7 +45,6 @@ SoC DTSI: + PCIe controller node with msi-parent property pointing to MSI node: pcie0: pcie@1f2b0000 { - status = "disabled"; device_type = "pci"; compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt index 1070b068c7c6..6fd2decfa66c 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt @@ -8,7 +8,7 @@ Required properties: property. - reg-names: Must include the following entries: "csr": controller configuration registers. - "cfg": pcie configuration space registers. + "cfg": PCIe configuration space registers. - #address-cells: set to <3> - #size-cells: set to <2> - ranges: ranges for the outbound memory, I/O regions. @@ -21,11 +21,11 @@ Required properties: Optional properties: - status: Either "ok" or "disabled". -- dma-coherent: Present if dma operations are coherent +- dma-coherent: Present if DMA operations are coherent Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie0: pcie@1f2b0000 { status = "disabled"; @@ -51,7 +51,7 @@ SoC specific DT Entry: }; -Board specific DT Entry: +Board-specific DT Entry: &pcie0 { status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt index 3259798a1192..01bf7fdf4c19 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -15,9 +15,9 @@ Required properties: - device_type: must be "pci" - interrupts: Should contain NWL PCIe interrupt - interrupt-names: Must include the following entries: - "msi1, msi0": interrupt asserted when MSI is received + "msi1, msi0": interrupt asserted when an MSI is received "intx": interrupt asserted when a legacy interrupt is received - "misc": interrupt asserted when miscellaneous is received + "misc": interrupt asserted when miscellaneous interrupt is received - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCI interface to interrupt numbers. - ranges: ranges for the PCI memory regions (I/O space region is not @@ -26,7 +26,8 @@ Required properties: detailed explanation - msi-controller: indicates that this is MSI controller node - msi-parent: MSI parent of the root complex itself -- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts +- legacy-interrupt-controller: Interrupt controller device node for Legacy + interrupts - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: should be set to 1 - #address-cells: specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt index 5f3a65a9dd88..e1bb12711fbf 100644 --- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -61,19 +61,16 @@ Example: compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; #phy-cells = <1>; - status = "disabled"; }; phy2: phy@1f22a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f22a000 0x0 0x100>; #phy-cells = <1>; - status = "ok"; }; phy3: phy@1f23a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f23a000 0x0 0x100>; #phy-cells = <1>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt index f37b3a86341d..300830dda0bf 100644 --- a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt @@ -16,5 +16,4 @@ usb_phy: usb_phy@2620738 { #address-cells = <1>; #size-cells = <1>; reg = <0x2620738 32>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index 0acc5a99fb79..41e09ed2ca70 100644 --- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -1,13 +1,18 @@ -mt65xx USB3.0 PHY binding +MediaTek T-PHY binding -------------------------- -This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. +T-phy controller supports physical layer functionality for a number of +controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. Required properties (controller (parent) node): - compatible : should be one of - "mediatek,mt2701-u3phy" - "mediatek,mt2712-u3phy" - "mediatek,mt8173-u3phy" + "mediatek,generic-tphy-v1" + "mediatek,generic-tphy-v2" + "mediatek,mt2701-u3phy" (deprecated) + "mediatek,mt2712-u3phy" (deprecated) + "mediatek,mt8173-u3phy"; + make use of "mediatek,generic-tphy-v1" on mt2701 instead and + "mediatek,generic-tphy-v2" on mt2712 instead. - clocks : (deprecated, use port's clocks instead) a list of phandle + clock-specifier pairs, one for each entry in clock-names - clock-names : (deprecated, use port's one instead) must contain @@ -35,6 +40,8 @@ Required properties (port (child) node): cell after port phandle is phy type from: - PHY_TYPE_USB2 - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA Example: @@ -44,14 +51,12 @@ u3phy: usb-phy@11290000 { #address-cells = <2>; #size-cells = <2>; ranges; - status = "okay"; u2port0: usb-phy@11290800 { reg = <0 0x11290800 0 0x100>; clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; u3port0: usb-phy@11290900 { @@ -59,7 +64,6 @@ u3phy: usb-phy@11290000 { clocks = <&clk26m>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; u2port1: usb-phy@11291000 { @@ -67,7 +71,6 @@ u3phy: usb-phy@11290000 { clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt new file mode 100644 index 000000000000..bfcf80341657 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -0,0 +1,43 @@ +mvebu comphy driver +------------------- + +A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It +provides a number of shared PHYs used by various interfaces (network, sata, +usb, PCIe...). + +Required properties: + +- compatible: should be "marvell,comphy-cp110" +- reg: should contain the comphy register location and length. +- marvell,system-controller: should contain a phandle to the + system controller node. +- #address-cells: should be 1. +- #size-cells: should be 0. + +A sub-node is required for each comphy lane provided by the comphy. + +Required properties (child nodes): + +- reg: comphy lane number. +- #phy-cells : from the generic phy bindings, must be 1. Defines the + input port to use for a given comphy lane. + +Example: + + cpm_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cpm_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt index f95b6260a3b3..64afdd13d91d 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt @@ -18,7 +18,6 @@ Example: clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; }; Armada 375 USB cluster diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt index 84d59b0db8df..074a7b3b0425 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -6,6 +6,7 @@ Required properties (phy (parent) node): * "rockchip,rk3328-usb2phy" * "rockchip,rk3366-usb2phy" * "rockchip,rk3399-usb2phy" + * "rockchip,rv1108-usb2phy" - reg : the address offset of grf for usb-phy configuration. - #clock-cells : should be 0. - clock-output-names : specify the 480m output clock name. @@ -18,6 +19,10 @@ Optional properties: usb-phy output 480m and xin24m. Refer to clk/clock-bindings.txt for generic clock consumer properties. + - rockchip,usbgrf : phandle to the syscon managing the "usb general + register files". When set driver will request its + phandle as one companion-grf for some special SoCs + (e.g RV1108). Required nodes : a sub-node is required for each port the phy provides. The sub-node name is used to identify host or otg port, @@ -28,10 +33,14 @@ Required nodes : a sub-node is required for each port the phy provides. Required properties (port (child) node): - #phy-cells : must be 0. See ./phy-bindings.txt for details. - interrupts : specify an interrupt for each entry in interrupt-names. - - interrupt-names : a list which shall be the following entries: + - interrupt-names : a list which should be one of the following cases: + Regular case: * "otg-id" : for the otg id interrupt. * "otg-bvalid" : for the otg vbus interrupt. * "linestate" : for the host/otg linestate interrupt. + Some SoCs use one interrupt with the above muxed together, so for these + * "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate + to one. Optional properties: - phy-supply : phandle to a regulator that provides power to VBUS. @@ -58,14 +67,12 @@ grf: syscon@ff770000 { <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "otg-id", "otg-bvalid", "linestate"; - status = "okay"; }; u2phy_host: host-port { #phy-cells = <0>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "linestate"; - status = "okay"; }; }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt index 86f2dbe07ed4..a1697c27aecd 100644 --- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt @@ -25,7 +25,6 @@ Example: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; phy@100f8830 { @@ -35,5 +34,4 @@ Example: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index e11c563a65ec..b6a9f2b92bab 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. Required properties: - compatible: compatible list, contains: + "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. @@ -38,6 +39,8 @@ Required properties: "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain "phy", "common". + For "qcom,ipq8074-qmp-pcie-phy" must contain: + "phy", "common". - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. @@ -60,6 +63,13 @@ Required properties for child node: one for each entry in clock-names. - clock-names: Must contain following for pcie and usb qmp phys: "pipe<lane-number>" for pipe clock specific to each lane. + - clock-output-names: Name of the PHY clock that will be the parent for + the above pipe clock. + + For "qcom,ipq8074-qmp-pcie-phy": + - "pcie20_phy0_pipe_clk" Pipe Clock parent + (or) + "pcie20_phy1_pipe_clk" - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. @@ -96,6 +106,7 @@ Example: clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; }; diff --git a/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt new file mode 100644 index 000000000000..9d2868a437ab --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt @@ -0,0 +1,23 @@ +Mediatek/Ralink USB PHY + +Required properties: + - compatible: "ralink,rt3352-usbphy" + "mediatek,mt7620-usbphy" + "mediatek,mt7628-usbphy" + - reg: required for "mediatek,mt7628-usbphy", unused otherwise + - #phy-cells: should be 0 + - ralink,sysctl: a phandle to a ralink syscon register region + - resets: the two reset controllers for host and device + - reset-names: the names of the 2 reset controllers + +Example: + +usbphy: phy { + compatible = "mediatek,mt7628-usbphy"; + reg = <0x10120000 0x1000>; + #phy-cells = <0>; + + ralink,sysctl = <&sysc>; + resets = <&rstctrl 22 &rstctrl 25>; + reset-names = "host", "device"; +}; diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt index 0f6222a672ce..b496042f1f44 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt @@ -3,7 +3,6 @@ Rockchip PCIE PHY Required properties: - compatible: rockchip,rk3399-pcie-phy - - #phy-cells: must be 0 - clocks: Must contain an entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must be "refclk" @@ -11,6 +10,12 @@ Required properties: See ../reset/reset.txt for details. - reset-names: Must be "phy" +Required properties for legacy PHY mode (deprecated): + - #phy-cells: must be 0 + +Required properties for per-lane PHY mode (preferred): + - #phy-cells: must be 1 + Example: grf: syscon@ff770000 { diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index ab80bfe31cb3..1c40ccd40ce4 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -82,7 +82,6 @@ usbphy: phy@125b0000 { reg = <0x125b0000 0x100>; clocks = <&clock 305>, <&clock 2>; clock-names = "phy", "ref"; - status = "okay"; #phy-cells = <1>; samsung,sysreg-phandle = <&sys_reg>; samsung,pmureg-phandle = <&pmu_reg>; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 005bc22938ff..cbc7847dbf6c 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -9,6 +9,7 @@ Required properties: * allwinner,sun7i-a20-usb-phy * allwinner,sun8i-a23-usb-phy * allwinner,sun8i-a33-usb-phy + * allwinner,sun8i-a83t-usb-phy * allwinner,sun8i-h3-usb-phy * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy @@ -17,18 +18,22 @@ Required properties: * "phy_ctrl" * "pmu0" for H3, V3s and A64 * "pmu1" - * "pmu2" for sun4i, sun6i or sun7i + * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 + * "pmu3" for sun8i-h3 - #phy-cells : from the generic phy bindings, must be 1 - clocks : phandle + clock specifier for the phy clocks - clock-names : * "usb_phy" for sun4i, sun5i or sun7i * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i * "usb0_phy", "usb1_phy" for sun8i + * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t + * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3 - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" * "usb1_reset" - * "usb2_reset" for sun4i, sun6i or sun7i + * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 + * "usb3_reset" for sun8i-h3 Optional properties: - usb0_id_det-gpios : gpio phandle for reading the otg id pin value @@ -37,6 +42,7 @@ Optional properties: - usb0_vbus-supply : regulator phandle for controller usb0 vbus - usb1_vbus-supply : regulator phandle for controller usb1 vbus - usb2_vbus-supply : regulator phandle for controller usb2 vbus +- usb3_vbus-supply : regulator phandle for controller usb3 vbus Example: usbphy: phy@0x01c13400 { diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index 1cca85c709d1..f9853156e311 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -33,6 +33,5 @@ Example: clock-names = "hsic_480M", "hsic_12M", "phy"; resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; reset-names = "hsic", "phy"; - status = "disabled"; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 590e60378be3..3e23fece99da 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -148,5 +148,4 @@ dbgu: serial@fffff200 { interrupts = <1 4 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt new file mode 100644 index 000000000000..61466c58faae --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt @@ -0,0 +1,59 @@ +Cortina Systems Gemini pin controller + +This pin controller is found in the Cortina Systems Gemini SoC family, +see further arm/gemini.txt. It is a purely group-based multiplexing pin +controller. + +The pin controller node must be a subnode of the system controller node. + +Required properties: +- compatible: "cortina,gemini-pinctrl" + +Subnodes of the pin controller contain pin control multiplexing set-up. +Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes. + +Example: + + +syscon { + compatible = "cortina,gemini-syscon"; + ... + pinctrl { + compatible = "cortina,gemini-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, + <&vcontrol_default_pins>; + + dram_default_pins: pinctrl-dram { + mux { + function = "dram"; + groups = "dramgrp"; + }; + }; + rtc_default_pins: pinctrl-rtc { + mux { + function = "rtc"; + groups = "rtcgrp"; + }; + }; + power_default_pins: pinctrl-power { + mux { + function = "power"; + groups = "powergrp"; + }; + }; + system_default_pins: pinctrl-system { + mux { + function = "system"; + groups = "systemgrp"; + }; + }; + (...) + uart_default_pins: pinctrl-uart { + mux { + function = "uart"; + groups = "uartrxtxgrp"; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 9fde25f1401a..42d74f8a1bcc 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -61,7 +61,6 @@ Examples: usdhc@0219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt index 8c5d27c5b562..6666277c3acb 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt @@ -61,7 +61,6 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as: i2c1: i2c@30a20000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>; - status = "okay"; }; iomuxc-lpsr@302c0000 { diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt new file mode 100644 index 000000000000..44ad670ae11e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt @@ -0,0 +1,61 @@ +* Freescale i.MX7ULP IOMUX Controller + +i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7 +ports and IOMUXC DDR for DDR interface. + +Note: +This binding doc is only for the IOMUXC1 support in A7 Domain and it only +supports generic pin config. + +Please also refer pinctrl-bindings.txt in this directory for generic pinctrl +binding. + +=== Pin Controller Node === + +Required properties: +- compatible: "fsl,imx7ulp-iomuxc1" +- reg: Should contain the base physical address and size of the iomuxc + registers. + +=== Pin Configuration Node === +- pinmux: One integers array, represents a group of pins mux setting. + The format is pinmux = <PIN_FUNC_ID>, PIN_FUNC_ID is a pin working on + a specific function. + + NOTE: i.MX7ULP PIN_FUNC_ID consists of 4 integers as it shares one mux + and config register as follows: + <mux_conf_reg input_reg mux_mode input_val> + + Refer to imx7ulp-pinfunc.h in in device tree source folder for all + available imx7ulp PIN_FUNC_ID. + +Optional Properties: +- drive-strength Integer. Controls Drive Strength + 0: Standard + 1: Hi Driver +- drive-push-pull Bool. Enable Pin Push-pull +- drive-open-drain Bool. Enable Pin Open-drian +- slew-rate: Integer. Controls Slew Rate + 0: Standard + 1: Slow +- bias-disable: Bool. Pull disabled +- bias-pull-down: Bool. Pull down on pin +- bias-pull-up: Bool. Pull up on pin + +Examples: +#include "imx7ulp-pinfunc.h" + +/* Pin Controller Node */ +iomuxc1: iomuxc@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + + /* Pin Configuration Node */ + pinctrl_lpuart4: lpuart4grp { + pinmux = < + IMX7ULP_PAD_PTC3__LPUART4_RX + IMX7ULP_PAD_PTC2__LPUART4_TX + >; + bias-pull-up; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt index f2abdaee9022..e0e886b73527 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt @@ -56,5 +56,4 @@ Example: pinctrl-0 = <&state_dpaux_i2c>; pinctrl-1 = <&state_dpaux_off>; pinctrl-names = "default", "idle"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt index 09e81a95bbfd..b1159434f593 100644 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt @@ -50,7 +50,6 @@ uart2: serial@900000 { reg-io-width = <1>; current-speed = <115200>; no-loopback-test; - status = "disabled"; resets = <&reset 22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt index ca01710ee29a..3b7266c7c438 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt @@ -69,8 +69,9 @@ PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS -VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2 +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 +USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 +WDTRST2 aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: @@ -86,7 +87,8 @@ SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9 SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0 SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 -TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2 +TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS +VGAVS VPI24 VPO WDTRST1 WDTRST2 Examples ======== diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 62d0f33fa65e..4483cc31e531 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -268,6 +268,8 @@ output-enable - enable output on a pin without actively driving it (such as enabling an output buffer) output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +sleep-hardware-state - indicate this is sleep related state which will be programmed + into the registers for the sleep state. slew-rate - set the slew rate For example: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 17631d0a9af7..37d744750579 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -5,6 +5,7 @@ The Mediatek's Pin controller is used to control SoC pins. Required properties: - compatible: value should be one of the following. "mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl. + "mediatek,mt2712-pinctrl", compatible with mt2712 pinctrl. "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. "mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl. "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt new file mode 100644 index 000000000000..eee3dc260934 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -0,0 +1,63 @@ +Pincontrol driver for RK805 Power management IC. + +RK805 has 2 pins which can be configured as GPIO output only. + +Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + <pinctrl-binding.txt>. + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- #gpio-cells: Should be two. The first cell is the pin number and the + second is the GPIO flags. + +- gpio-controller: Marks the device node as a GPIO controller. + +- pins: List of pins. Valid values of pins properties are: gpio0, gpio1. + +First 2 properties must be added in the RK805 PMIC node, documented in +Documentation/devicetree/bindings/mfd/rk808.txt + +Optional properties: +------------------- +Following are optional properties defined as pinmux DT binding document +<pinctrl-bindings.txt>. Absence of properties will leave the configuration +on default. + function, + output-low, + output-high. + +Valid values for function properties are: gpio. + +Theres is also not customised properties for any GPIO. + +Example: +-------- +rk805: rk805@18 { + compatible = "rockchip,rk805"; + ... + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&rk805_default>; + + rk805_default: pinmux { + gpio01 { + pins = "gpio0", "gpio1"; + function = "gpio"; + output-high; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt index e219849b21ca..39170f372599 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt @@ -81,5 +81,4 @@ pmm: pin-controller@1462000 { &vga { pinctrl-names = "default"; pinctrl-0 = <&vga_pins>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt index a7bde64798c7..a752a4716486 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt @@ -46,7 +46,8 @@ Valid values for pins are: gpio0-gpio89 Valid values for function are: - cam_mclk, codec_mic_i2s, codec_spkr_i2s, gpio, gsbi1, gsbi2, gsbi3, gsbi4, + cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gpio, gsbi1, gsbi2, gsbi3, gsbi4, gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1, gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm, diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt index cfb8500dd56b..93374f478b9e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -50,7 +50,11 @@ Valid values for qcom,pins are: Supports mux, bias and drive-strength Valid values for qcom,function are: -gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0 +aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0, +blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx, +jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11, +mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1, +smart2, smart3, tm, wifi0, wifi1 Example: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 8d893a874634..5b12c57e7f02 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -16,6 +16,7 @@ PMIC's from Qualcomm. "qcom,pm8941-gpio" "qcom,pm8994-gpio" "qcom,pma8084-gpio" + "qcom,pmi8994-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively @@ -85,6 +86,7 @@ to specify in a pin configuration subnode: gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 gpio1-gpio22 for pma8084 + gpio1-gpio10 for pmi8994 - function: Usage: required @@ -98,7 +100,10 @@ to specify in a pin configuration subnode: "dtest1", "dtest2", "dtest3", - "dtest4" + "dtest4", + And following values are supported by LV/MV GPIO subtypes: + "func3", + "func4" - bias-disable: Usage: optional @@ -183,6 +188,25 @@ to specify in a pin configuration subnode: Value type: <none> Definition: The specified pins are configured in open-source mode. +- qcom,analog-pass: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in analog-pass-through mode. + +- qcom,atest: + Usage: optional + Value type: <u32> + Definition: Selects ATEST rail to route to GPIO when it's configured + in analog-pass-through mode. + Valid values are 1-4 corresponding to ATEST1 to ATEST4. + +- qcom,dtest-buffer: + Usage: optional + Value type: <u32> + Definition: Selects DTEST rail to route to GPIO when it's configured + as digital input. + Valid values are 1-4 corresponding to DTEST1 to DTEST4. + Example: pm8921_gpio: gpio@150 { diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 645082f03259..9b4f8041c36a 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -24,6 +24,7 @@ Required Properties: - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller. - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller. - "renesas,pfc-r8a7796": for R8A7796 (R-Car M3-W) compatible pin-controller. + - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller. - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. - reg: Base address and length of each memory resource used by the pin @@ -111,7 +112,7 @@ Examples Example 1: SH73A0 (SH-Mobile AG5) pin controller node - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; @@ -172,5 +173,4 @@ Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device bus-width = <8>; vmmc-supply = <®_1p8v>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index ee01ab58224d..4864e3a74de3 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -24,6 +24,7 @@ Required properties for iomux controller: "rockchip,rk2928-pinctrl": for Rockchip RK2928 "rockchip,rk3066a-pinctrl": for Rockchip RK3066a "rockchip,rk3066b-pinctrl": for Rockchip RK3066b + "rockchip,rk3128-pinctrl": for Rockchip RK3128 "rockchip,rk3188-pinctrl": for Rockchip RK3188 "rockchip,rk3228-pinctrl": for Rockchip RK3228 "rockchip,rk3288-pinctrl": for Rockchip RK3288 @@ -120,7 +121,6 @@ uart2: serial@20064000 { reg-shift = <2>; reg-io-width = <1>; clocks = <&mux_uart2>; - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt new file mode 100644 index 000000000000..b1cea7a3a071 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt @@ -0,0 +1,83 @@ +* Spreadtrum Pin Controller + +The Spreadtrum pin controller are organized in 3 blocks (types). + +The first block comprises some global control registers, and each +register contains several bit fields with one bit or several bits +to configure for some global common configuration, such as domain +pad driving level, system control select and so on ("domain pad +driving level": One pin can output 3.0v or 1.8v, depending on the +related domain pad driving selection, if the related domain pad +slect 3.0v, then the pin can output 3.0v. "system control" is used +to choose one function (like: UART0) for which system, since we +have several systems (AP/CP/CM4) on one SoC.). + +There are too much various configuration that we can not list all +of them, so we can not make every Spreadtrum-special configuration +as one generic configuration, and maybe it will add more strange +global configuration in future. Then we add one "sprd,control" to +set these various global control configuration, and we need use +magic number for this property. + +Moreover we recognise every fields comprising one bit or several +bits in one global control register as one pin, thus we should +record every pin's bit offset, bit width and register offset to +configure this field (pin). + +The second block comprises some common registers which have unified +register definition, and each register described one pin is used +to configure the pin sleep mode, function select and sleep related +configuration. + +Now we have 4 systems for sleep mode on SC9860 SoC: AP system, +PUBCP system, TGLDSP system and AGDSP system. And the pin sleep +related configuration are: +- input-enable +- input-disable +- output-high +- output-low +- bias-pull-up +- bias-pull-down + +In some situation we need set the pin sleep mode and pin sleep related +configuration, to set the pin sleep related configuration automatically +by hardware when the system specified by sleep mode goes into deep +sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP +and set the pin sleep related configuration as "input-enable", which +means when PUBCP system goes into deep sleep mode, this pin will be set +input enable automatically. + +Moreover we can not use the "sleep" state, since some systems (like: +PUBCP system) do not run linux kernel OS (only AP system run linux +kernel on SC9860 platform), then we can not select "sleep" state +when the PUBCP system goes into deep sleep mode. Thus we introduce +"sprd,sleep-mode" property to set pin sleep mode. + +The last block comprises some misc registers which also have unified +register definition, and each register described one pin is used to +configure drive strength, pull up/down and so on. Especially for pull +up, we have two kind pull up resistor: 20K and 4.7K. + +Required properties for Spreadtrum pin controller: +- compatible: "sprd,<soc>-pinctrl" + Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs. +- reg: The register address of pin controller device. +- pins : An array of pin names. + +Optional properties: +- function: Specified the function name. +- drive-strength: Drive strength in mA. +- input-schmitt-disable: Enable schmitt-trigger mode. +- input-schmitt-enable: Disable schmitt-trigger mode. +- bias-disable: Disable pin bias. +- bias-pull-down: Pull down on pin. +- bias-pull-up: Pull up on pin. +- input-enable: Enable pin input. +- input-disable: Enable pin output. +- output-high: Set the pin as an output level high. +- output-low: Set the pin as an output level low. +- sleep-hardware-state: Indicate these configs in this state are sleep related. +- sprd,control: Control values referring to databook for global control pins. +- sprd,sleep-mode: Sleep mode selection. + +Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values. diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt new file mode 100644 index 000000000000..5a628333d52f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt @@ -0,0 +1,70 @@ +* Spreadtrum SC9860 Pin Controller + +Please refer to sprd,pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: Must be "sprd,sc9860-pinctrl". +- reg: The register address of pin controller device. +- pins : An array of strings, each string containing the name of a pin. + +Optional properties: +- function: A string containing the name of the function, values must be + one of: "func1", "func2", "func3" and "func4". +- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10, + 12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33. +- input-schmitt-disable: Enable schmitt-trigger mode. +- input-schmitt-enable: Disable schmitt-trigger mode. +- bias-disable: Disable pin bias. +- bias-pull-down: Pull down on pin. +- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor + is 20K and 4700 for pull-up resistor is 4.7K. +- input-enable: Enable pin input. +- input-disable: Enable pin output. +- output-high: Set the pin as an output level high. +- output-low: Set the pin as an output level low. +- sleep-hardware-state: Indicate these configs in this state are sleep related. +- sprd,control: Control values referring to databook for global control pins. +- sprd,sleep-mode: Choose the pin sleep mode, and supported values are: + AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP. + +Pin sleep mode definition: +enum pin_sleep_mode { + AP_SLEEP = BIT(0), + PUBCP_SLEEP = BIT(1), + TGLDSP_SLEEP = BIT(2), + AGDSP_SLEEP = BIT(3), +}; + +Example: +pin_controller: pinctrl@402a0000 { + compatible = "sprd,sc9860-pinctrl"; + reg = <0x402a0000 0x10000>; + + grp1: sd0 { + pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE"; + sprd,control = <0x1>; + }; + + grp2: rfctl_33 { + pins = "SC9860_RFCTL33"; + function = "func2"; + sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>; + grp2_sleep_mode: rfctl_33_sleep { + pins = "SC9860_RFCTL33"; + sleep-hardware-state; + output-low; + } + }; + + grp3: rfctl_misc_20 { + pins = "SC9860_RFCTL20_MISC"; + drive-strength = <10>; + bias-pull-up = <4700>; + grp3_sleep_mode: rfctl_misc_sleep { + pins = "SC9860_RFCTL20_MISC"; + sleep-hardware-state; + bias-pull-up; + } + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index d907a74f8dc0..33e3d3c47552 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -180,5 +180,4 @@ pin-controller { &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt index 4f7a3bc9c407..e45affea8078 100644 --- a/Documentation/devicetree/bindings/power/power-controller.txt +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -13,6 +13,5 @@ Example: act8846: act8846@5 { compatible = "active-semi,act8846"; - status = "okay"; system-power-controller; } diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt index 83734dc3a389..b63948737d80 100644 --- a/Documentation/devicetree/bindings/power/reset/st-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt @@ -8,5 +8,4 @@ Example node: restart { compatible = "st,stih407-restart"; st,syscfg = <&syscfg_sbc_reg>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index 43c21fb04564..4a4766e9c254 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -39,6 +39,8 @@ Required properties: - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - "rockchip,rk3399-io-voltage-domain" for rk3399 - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains + - "rockchip,rv1108-io-voltage-domain" for rv1108 + - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains Deprecated properties: - rockchip,grf: phandle to the syscon managing the "general register files" diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt index de78d761ce44..b86ecada4f84 100644 --- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt @@ -29,7 +29,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; charger { compatible = "active-semi,act8945a-charger"; @@ -43,6 +42,5 @@ Example: active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt index f0f4e12b076e..bab947fef025 100644 --- a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt @@ -21,5 +21,4 @@ Example: flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt index e03e85ae6572..d6e8dfd0a581 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt @@ -12,7 +12,6 @@ Example: clock-frequency = <50000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; max14656@35 { compatible = "maxim,max14656"; diff --git a/Documentation/devicetree/bindings/powerpc/ibm,vas.txt b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt new file mode 100644 index 000000000000..bf11d2faf7b8 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt @@ -0,0 +1,22 @@ +* IBM Powerpc Virtual Accelerator Switchboard (VAS) + +VAS is a hardware mechanism that allows kernel subsystems and user processes +to directly submit compression and other requests to Nest accelerators (NX) +or other coprocessors functions. + +Required properties: +- compatible : should be "ibm,vas". +- ibm,vas-id : A unique identifier for each instance of VAS in the system +- reg : Should contain 4 pairs of 64-bit fields specifying the Hypervisor + window context start and length, OS/User window context start and length, + "Paste address" start and length, "Paste window id" start bit and number + of bits) + +Example: + + vas@6019100000000 { + compatible = "ibm,vas", "ibm,power9-vas"; + reg = <0x6019100000000 0x2000000 0x6019000000000 0x100000000 0x8000000000000 0x100000000 0x20 0x10>; + name = "vas"; + ibm,vas-id = <0x1>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt new file mode 100644 index 000000000000..6ad881cbffda --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt @@ -0,0 +1,27 @@ +IBM OPAL Sensor Groups Binding +------------------------------- + +Node: /ibm,opal/sensor-groups + +Description: Contains sensor groups available in the Powernv P9 +servers. Each child node indicates a sensor group. + +- compatible : Should be "ibm,opal-sensor-group" + +Each child node contains below properties: + +- type : String to indicate the type of sensor-group + +- sensor-group-id: Abstract unique identifier provided by firmware of + type <u32> which is used for sensor-group + operations like clearing the min/max history of all + sensors belonging to the group. + +- ibm,chip-id : Chip ID + +- sensors : Phandle array of child nodes of /ibm,opal/sensor/ + belonging to this group + +- ops : Array of opal-call numbers indicating available operations on + sensor groups like clearing min/max, enabling/disabling sensor + group. diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt index 7c04e22a5d6a..6b1075ee8a30 100644 --- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt +++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt @@ -16,5 +16,4 @@ Example: ptp: ptp-dte@180af650 { compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte"; reg = <0x180af650 0x10>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 5b07bebbf6f7..1ee81321c35e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -19,7 +19,6 @@ Example: compatible = "amlogic,meson-gxbb-pwm"; reg = <0x0 0x08550 0x0 0x10>; #pwm-cells = <3>; - status = "disabled"; clocks = <&xtal>, <&xtal>; clock-names = "clkin0", "clkin1"; } diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt new file mode 100644 index 000000000000..f8338d11fd2b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt @@ -0,0 +1,24 @@ +STMicroelectronics STM32 Low-Power Timer PWM + +STM32 Low-Power Timer provides single channel PWM. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required parameters: +- compatible: Must be "st,stm32-pwm-lp". + +Optional properties: +- pinctrl-names: Set to "default". +- pinctrl-0: Phandle pointing to pin configuration node for PWM. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + pwm { + compatible = "st,stm32-pwm-lp"; + pinctrl-names = "default"; + pinctrl-0 = <&lppwm1_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index f1cbeefb3087..c5171660eaf9 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -19,5 +19,4 @@ Example: reg = <0x01c20e00 0xc>; clocks = <&osc24M>; #pwm-cells = <3>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt index 1a5d7b71db89..4633697fbda1 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt @@ -26,7 +26,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am33xx */ ti,hwmods = "epwmss0"; #address-cells = <1>; #size-cells = <1>; - status = "disabled"; ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 0x48300180 0x48300180 0x80 /* EQEP */ 0x48300200 0x48300200 0x80>; /* EHRPWM */ @@ -40,7 +39,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am4372 */ ti,hwmods = "epwmss0"; #address-cells = <1>; #size-cells = <1>; - status = "disabled"; ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 0x48300180 0x48300180 0x80 /* EQEP */ 0x48300200 0x48300200 0x80>; /* EHRPWM */ diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 6067d9830d07..3ae9f1088845 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -52,7 +52,6 @@ Example: compatible = "active-semi,act8865"; reg = <0x5b>; active-semi,vsel-high; - status = "disabled"; regulators { vcc_1v8_reg: DCDC_REG1 { diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt index 5c80a7779552..ac955dea00d1 100644 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -23,7 +23,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; active-semi,vsel-high; diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt index 02649d8b3f5a..84d544d8c1b1 100644 --- a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt @@ -1,4 +1,4 @@ -Mediatek MT6311 Regulator Driver +Mediatek MT6311 Regulator Required properties: - compatible: "mediatek,mt6311-regulator" diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt index c35d878b0960..a48749db4df3 100644 --- a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -1,4 +1,4 @@ -Mediatek MT6323 Regulator Driver +Mediatek MT6323 Regulator All voltage regulators are defined as subnodes of the regulators node. A list of regulators provided by this controller are defined as subnodes of the diff --git a/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt new file mode 100644 index 000000000000..0058441f16d2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt @@ -0,0 +1,89 @@ +MediaTek MT6380 Regulator + +All voltage regulators provided by the MT6380 PMIC are described as the +subnodes of the MT6380 regulators node. Each regulator is named according +to its regulator type, buck-<name> and ldo-<name>. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + buck-core1, buck-vcore, buck-vrf +LDO: + ldo-vm ,ldo-va , ldo-vphy, ldo-vddr, ldo-vt + +Example: + + regulators { + compatible = "mediatek,mt6380-regulator"; + + mt6380_vcpu_reg: buck-vcore1 { + regulator-name = "vcore1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + }; + + mt6380_vrf_reg: buck-vrf { + regulator-name = "vrf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1575000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vm_reg: ldo-vm { + regulator-name = "vm"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_va_reg: ldo-va { + regulator-name = "va"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vphy_reg: ldo-vphy { + regulator-name = "vphy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vddr_reg: ldo-vddr { + regulator-name = "vddr"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1840000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vt_reg: ldo-vt { + regulator-name = "vt"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt index a42b1d6e9863..01141fb00875 100644 --- a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt @@ -1,4 +1,4 @@ -Mediatek MT6397 Regulator Driver +Mediatek MT6397 Regulator Required properties: - compatible: "mediatek,mt6397-regulator" diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index bf85aa9ad6a7..3d78d507e29f 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -71,7 +71,7 @@ Continuous Voltage With Enable GPIO Example: * Inverted PWM logic, and the duty cycle range is limited * to 30%-70%. */ - pwm-dutycycle-range <700 300>; /* */ + pwm-dutycycle-range = <700 300>; /* */ }; Voltage Table Example: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt new file mode 100644 index 000000000000..3944ee3e731e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt @@ -0,0 +1,20 @@ +STM32 VREFBUF - Voltage reference buffer + +Some STM32 devices embed a voltage reference buffer which can be used as +voltage reference for ADCs, DACs and also as voltage reference for external +components through the dedicated VREF+ pin. + +Required properties: +- compatible: Must be "st,stm32-vrefbuf". +- reg: Offset and length of VREFBUF register set. +- clocks: Must contain an entry for peripheral clock. + +Example: + vrefbuf: regulator@58003C00 { + compatible = "st,stm32-vrefbuf"; + reg = <0x58003C00 0x8>; + clocks = <&rcc VREF_CK>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdda>; + }; diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt index b4e96a278445..05d5be48dae4 100644 --- a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt +++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt @@ -80,5 +80,4 @@ mac: ethernet@40010000 { clock-names = "stmmaceth"; resets = <&rgu 22>; reset-names = "stmmaceth"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/rng/imx-rngc.txt b/Documentation/devicetree/bindings/rng/imx-rngc.txt new file mode 100644 index 000000000000..93c7174a7bed --- /dev/null +++ b/Documentation/devicetree/bindings/rng/imx-rngc.txt @@ -0,0 +1,21 @@ +Freescale RNGC (Random Number Generator Version C) + +The driver also supports version B, which is mostly compatible +to version C. + +Required properties: +- compatible : should be one of + "fsl,imx25-rngb" + "fsl,imx35-rngc" +- reg : offset and length of the register set of this block +- interrupts : the interrupt number for the RNGC block +- clocks : the RNGC clk source + +Example: + +rng@53fb0000 { + compatible = "fsl,imx25-rngb"; + reg = <0x53fb0000 0x4000>; + interrupts = <22>; + clocks = <&trng_clk>; +}; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt index 0a4c371a9b7a..a66692a08ace 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -45,5 +45,4 @@ Example: interrupts = <17 1>; interrupt-names = "alarm"; st,syscfg = <&pwrcfg>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt index 2a42a323fa1a..b6a869f97715 100644 --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -85,5 +85,4 @@ Example: <366 1>,<367 1>/* cq30-31 */ <376 4>,/* fatal ecc */ <381 4>;/* fatal axi */ - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt index 3ad115efed1e..6a4e0d30d8c4 100644 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): &i2c2 { - status = "okay"; st33zp24: st33zp24@13 { diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt index 158b0165e01c..604dce901b60 100644 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt @@ -18,7 +18,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4): &mcspi4 { - status = "okay"; st33zp24@0 { diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 8cb638b7e89c..3eca6de6369d 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -17,5 +17,4 @@ tpm@57 { compatible = "nuvoton,npct650", "nuvoton,npct601"; linux,sml-base = <0x7f 0xfd450000>; linux,sml-size = <0x10000>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt index 85741cd468cc..b800667da92b 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt @@ -13,7 +13,6 @@ Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4): &mcspi4 { - status = "okay"; tpm_tis@0 { diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 419ff6c0a47f..dad3b2ec66d4 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -14,6 +14,8 @@ Required properties: tegra132, or tegra210. - "nxp,lpc3220-uart" - "ralink,rt2880-uart" + - For MediaTek BTIF, must contain '"mediatek,<chip>-btif", + "mediatek,mtk-btif"' where <chip> is mt7622, mt7623. - "altr,16550-FIFO32" - "altr,16550-FIFO64" - "altr,16550-FIFO128" diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt index 5cae2eb686f8..256cc150ca7e 100644 --- a/Documentation/devicetree/bindings/serial/arc-uart.txt +++ b/Documentation/devicetree/bindings/serial/arc-uart.txt @@ -15,7 +15,6 @@ arcuart0: serial@c0fc1000 { interrupts = <5>; clock-frequency = <80000000>; current-speed = <115200>; - status = "okay"; }; Note: Each port should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt index 51b3c9e80ad9..048c3818c826 100644 --- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -15,7 +15,6 @@ serial@b00260000 { compatible = "axis,etraxfs-uart"; reg = <0xb0026000 0x1000>; interrupts = <68>; - status = "disabled"; dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index c93a2d1c1a65..d7edf732eb7f 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -33,5 +33,4 @@ serial@70006000 { reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index d5f73b8f614f..9d098cf73b53 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -72,13 +72,10 @@ Examples: }; uarta: serial@12490000 { - status = "ok"; }; uartb: serial@16340000 { - status = "ok"; }; uartc: serial@1a240000 { - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 8d27d1a603e7..4fc96946f81d 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -41,6 +41,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. + - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index 32b1fa1f2a5b..b8415936dfdb 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -5,14 +5,13 @@ the built-in half-duplex mode. The properties described hereafter shall be given to a half-duplex capable UART node. -Required properties: +Optional properties: - rs485-rts-delay: prop-encoded-array <a b> where: * a is the delay between rts signal and beginning of data sent in milliseconds. it corresponds to the delay before sending data. * b is the delay between end of data sent and rts signal in milliseconds it corresponds to the delay after sending data and actual release of the line. - -Optional properties: + If this property is not specified, <0 0> is assumed. - linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 feature at boot time. It can be disabled later with proper ioctl. - rs485-rx-during-tx: empty property that enables the receiving of data even diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt index b542a0ecf06e..863c2893759e 100644 --- a/Documentation/devicetree/bindings/serial/serial.txt +++ b/Documentation/devicetree/bindings/serial/serial.txt @@ -43,7 +43,6 @@ Examples: rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - status = "okay"; }; scifa4: serial@e6c80000 { @@ -54,5 +53,4 @@ Examples: clock-names = "fck"; power-domains = <&pd_a3sp>; uart-has-rtscts; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 85ec5f2b1996..3657f9f9d17a 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -1,12 +1,19 @@ * STMicroelectronics STM32 USART Required properties: -- compatible: Can be either "st,stm32-usart", "st,stm32-uart", -"st,stm32f7-usart" or "st,stm32f7-uart" depending on whether -the device supports synchronous mode and is compatible with -stm32(f4) or stm32f7. +- compatible: can be either: + - "st,stm32-usart", + - "st,stm32-uart", + - "st,stm32f7-usart", + - "st,stm32f7-uart", + - "st,stm32h7-usart" + - "st,stm32h7-uart". + depending on whether the device supports synchronous mode + and is compatible with stm32(f4), stm32f7 or stm32h7. - reg: The address and length of the peripheral registers space -- interrupts: The interrupt line of the USART instance +- interrupts: + - The interrupt line for the USART instance, + - An optional wake-up interrupt. - clocks: The input clock of the USART instance Optional properties: diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt index 362a76925bcd..f311472990a7 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -19,5 +19,4 @@ Example: reg = <0x01c2a000 0x400>; interrupts = <0 62 4>; clocks = <&apb1_gates 6>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt new file mode 100644 index 000000000000..7b7bc9cdf986 --- /dev/null +++ b/Documentation/devicetree/bindings/serio/ps2-gpio.txt @@ -0,0 +1,23 @@ +Device-Tree binding for ps/2 gpio device + +Required properties: + - compatible = "ps2-gpio" + - data-gpios: the data pin + - clk-gpios: the clock pin + - interrupts: Should trigger on the falling edge of the clock line. + +Optional properties: + - write-enable: Indicates whether write function is provided + to serio device. Possibly providing the write fn will not work, because + of the tough timing requirements. + +Example nodes: + +ps2@0 { + compatible = "ps2-gpio"; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + write-enable; +}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt index 2f5ede39bea2..fe1855f09dcc 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -78,7 +78,6 @@ Example for APQ8064: interrupts = <0 152 0x0>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; - status = "ok"; }; }; diff --git a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt index bf984d238620..953c092db72f 100644 --- a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt +++ b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt @@ -23,5 +23,4 @@ Example: compatible = "marvell,a370db-audio"; marvell,audio-controller = <&audio_controller>; marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index fdb25b492514..9d049d4bfd58 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -45,7 +45,6 @@ Example: &ssc0 { #sound-dai-cells = <0>; - status = "okay"; }; &i2c { diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt index b139e66d2a11..630bf7c0344d 100644 --- a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -47,21 +47,17 @@ Example: ssp0: ssp_port@0 { reg = <0>; - status = "okay"; }; ssp1: ssp_port@1 { reg = <1>; - status = "disabled"; }; ssp2: ssp_port@2 { reg = <2>; - status = "disabled"; }; spdif: spdif_port@3 { reg = <3>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/sound/cs43130.txt b/Documentation/devicetree/bindings/sound/cs43130.txt new file mode 100644 index 000000000000..8b1dd5aeb004 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs43130.txt @@ -0,0 +1,67 @@ +CS43130 DAC + +Required properties: + + - compatible : "cirrus,cs43130", "cirrus,cs4399", "cirrus,cs43131", + "cirrus,cs43198" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply, VL-supply, VCP-supply, VD-supply: + power supplies for the device, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + +Optional properties: + + - reset-gpios : Active low GPIO used to reset the device + + - cirrus,xtal-ibias: + When external MCLK is generated by external crystal + oscillator, CS43130 can be used to provide bias current + for external crystal. Amount of bias current sent is + set as: + 1 = 7.5uA + 2 = 12.5uA + 3 = 15uA + + - cirrus,dc-measure: + Boolean, define to enable headphone DC impedance measurement. + + - cirrus,ac-measure: + Boolean, define to enable headphone AC impedance measurement. + DC impedance must also be enabled for AC impedance measurement. + + - cirrus,dc-threshold: + Define 2 DC impedance thresholds in ohms for HP output control. + Default values are 50 and 120 Ohms. + + - cirrus,ac-freq: + Define the frequencies at which to measure HP AC impedance. + Only used if "cirrus,dc-measure" is defined. + Exactly 10 frequencies must be defined. + If this properties is undefined, by default, + following frequencies are used: + <24 43 93 200 431 928 2000 4309 9283 20000> + The above frequencies are logarithmically equally spaced. + Log base is 10. + +Example: + +cs43130: audio-codec@30 { + compatible = "cirrus,cs43130"; + reg = <0x30>; + reset-gpios = <&axi_gpio 54 0>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + VL-supply = <&dummy_vreg>; + VCP-supply = <&dummy_vreg>; + VD-supply = <&dummy_vreg>; + cirrus,xtal-ibias = <2>; + interrupt-parent = <&gpio0>; + interrupts = <55 8>; + cirrus,dc-measure; + cirrus,ac-measure; + cirrus,dc-threshold = /bits/ 16 <20 100>; + cirrus,ac-freq = /bits/ 16 <24 43 93 200 431 928 2000 4309 9283 20000>; +}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt index e0b6165c9cfc..3ffc2562fb31 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt @@ -47,5 +47,4 @@ mcbsp0: mcbsp@1d10000 { dmas = <&edma0 3 1 &edma0 2 1>; dma-names = "tx", "rx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt new file mode 100644 index 000000000000..54c8ef6498a8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -0,0 +1,16 @@ +Device-Tree bindings for Digital microphone (DMIC) codec + +This device support generic PDM digital microphone. + +Required properties: + - compatible: should be "dmic-codec". + +Optional properties: + - dmicen-gpios: GPIO specifier for dmic to control start and stop + +Example node: + + dmic_codec: dmic@0 { + compatible = "dmic-codec"; + dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 3e26a9478e57..65979b205893 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -61,5 +61,4 @@ asrc: asrc@02034000 { "txa", "txb", "txc"; fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index cd3ee5d84f03..21c401e2ccda 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -59,5 +59,4 @@ esai: esai@02024000 { fsl,fifo-depth = <128>; fsl,esai-synchronous; big-endian; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 4ca39ddc0417..0f97e54c3d43 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -59,5 +59,4 @@ spdif: spdif@02004000 { "rxtx7"; big-endian; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt index 31af7bca3099..56407c30e954 100644 --- a/Documentation/devicetree/bindings/sound/hdmi.txt +++ b/Documentation/devicetree/bindings/sound/hdmi.txt @@ -13,5 +13,4 @@ Example node: hdmi_audio: hdmi_audio@0 { compatible = "linux,hdmi-audio"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 9800a560e0c2..77a57f84bed4 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -3,7 +3,8 @@ Mediatek AFE PCM controller for mt2701 Required properties: - compatible = "mediatek,mt2701-audio"; - reg: register location and size -- interrupts: Should contain AFE interrupt +- interrupts: should contain AFE and ASYS interrupts +- interrupt-names: should be "afe" and "asys" - power-domains: should define the power domain - clock-names: should have these clock names: "infra_sys_audio_clk", @@ -59,6 +60,7 @@ Example: <0 0x112A0000 0 0x20000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, <&topckgen CLK_TOP_AUD_MUX1_SEL>, diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt index ccb401cfef9d..551ecab67efe 100644 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt @@ -31,8 +31,22 @@ Required properties - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. - Optional Properties: + - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons + detection on headset when the mbhc is powered up + by internal current source, this is a low power. + - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons + detection on headset when mbhc is powered up + from micbias. +- qcom,micbias-lvl: Voltage (mV) for Mic Bias +- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a + NO (Normally Open). If not specified, then + its assumed that hphl pin on jack is NC + (Normally Closed). +- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is + NO (Normally Open). If not specified, then + its assumed that gnd pin on jack is NC + (Normally Closed). - qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor connected. - qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor @@ -48,6 +62,8 @@ spmi_bus { reg-names = "pmic-codec-core"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 7246bb268bf9..085bec364caf 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -199,10 +199,10 @@ Ex) sound { compatible = "simple-scu-audio-card"; ... - simple-audio-card,cpu@0 { + simple-audio-card,cpu-0 { sound-dai = <&rcar_sound 0>; }; - simple-audio-card,cpu@1 { + simple-audio-card,cpu-1 { sound-dai = <&rcar_sound 1>; }; simple-audio-card,codec { @@ -441,79 +441,79 @@ rcar_sound: sound@ec500000 { "clk_a", "clk_b", "clk_c", "clk_i"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -521,52 +521,52 @@ rcar_sound: sound@ec500000 { }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; @@ -621,7 +621,6 @@ Example: simple sound card /* Single DAI */ #sound-dai-cells = <0>; - status = "okay"; rcar_sound,dai { dai0 { @@ -667,7 +666,6 @@ Example: simple sound card for Multi channel /* Single DAI */ #sound-dai-cells = <0>; - status = "okay"; rcar_sound,dai { dai0 { diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt index 921729de7346..47f164fbd1d7 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt @@ -29,11 +29,13 @@ pdm: pdm@ff040000 { dma-names = "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&pdmm0_clk - &pdmm0_fsync &pdmm0_sdi0 &pdmm0_sdi1 &pdmm0_sdi2 &pdmm0_sdi3>; - pinctrl-1 = <&pdmm0_sleep>; - status = "disabled"; + pinctrl-1 = <&pdmm0_clk_sleep + &pdmm0_sdi0_sleep + &pdmm0_sdi1_sleep + &pdmm0_sdi2_sleep + &pdmm0_sdi3_sleep>; }; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt index eac91db07178..72d3cf4c2606 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt @@ -4,7 +4,7 @@ Required properties: - compatible: "rockchip,rk3399-gru-sound" - rockchip,cpu: The phandle of the Rockchip I2S controller that's connected to the codecs -- rockchip,codec: The phandle of the MAX98357A/RT5514/DA7219 codecs +- rockchip,codec: The phandle of the audio codecs Optional properties: - dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready. diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 206aba1b34bb..b208a752576c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -7,8 +7,12 @@ Required properties: - compatible: should be one of the following: - "rockchip,rk3066-i2s": for rk3066 + - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 + - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 + - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328 + - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366 - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368 - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399 - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 4706b96d450b..0a1dc4e1815c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -41,6 +41,5 @@ spdif: spdif@0x1011e000 { dma-names = "tx"; clock-names = "hclk", "mclk"; clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; - status = "disabled"; #sound-dai-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/sound/rt274.txt b/Documentation/devicetree/bindings/sound/rt274.txt new file mode 100644 index 000000000000..e9a6178c78cf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt274.txt @@ -0,0 +1,33 @@ +RT274 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt274". + +- reg : The I2C address of the device. + +Optional properties: + +- interrupts : The CODEC's interrupt output. + + +Pins on the device (for linking into audio routes) for RT274: + + * DMIC1 Pin + * DMIC2 Pin + * MIC + * LINE1 + * LINE2 + * HPO Pin + * SPDIF + * LINE3 + +Example: + +codec: rt274@1c { + compatible = "realtek,rt274"; + reg = <0x1c>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 70eaeaed2b18..ff381718c517 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -12,6 +12,14 @@ Required properties: Optional properties: +- "realtek,dc_offset_l_manual" +- "realtek,dc_offset_r_manual" +- "realtek,dc_offset_l_manual_mic" +- "realtek,dc_offset_r_manual_mic" + Based on the different PCB layout, add the manual offset value to + compensate the DC offset for each L and R channel, and they are different + between headphone and headset. + Pins on the device (for linking into audio routes) for RT5663: * IN1P diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.txt b/Documentation/devicetree/bindings/sound/samsung,odroid.txt index c30934dd975b..625b1b18fd02 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.txt +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.txt @@ -7,9 +7,6 @@ Required properties: - model - the user-visible name of this sound complex - clocks - should contain entries matching clock names in the clock-names property - - clock-names - should contain following entries: - - "epll" - indicating the EPLL output clock - - "i2s_rclk" - indicating the RCLK (root) clock of the I2S0 controller - samsung,audio-widgets - this property specifies off-codec audio elements like headphones or speakers, for details see widgets.txt - samsung,audio-routing - a list of the connections between audio @@ -46,9 +43,6 @@ sound { "IN1", "Mic Jack", "Mic Jack", "MICBIAS"; - clocks = <&clock CLK_FOUT_EPLL>, <&i2s0 CLK_I2S_RCLK_SRC>; - clock-names = "epll", "sclk_i2s"; - cpu { sound-dai = <&i2s0 0>; }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index c7a93931fad2..166f2290233b 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -86,6 +86,9 @@ Optional CPU/CODEC subnodes properties: in dai startup() and disabled with clk_disable_unprepare() in dai shutdown(). +- system-clock-direction-out : specifies clock direction as 'out' on + initialization. It is useful for some aCPUs with + fixed clocks. Example 1 - single DAI link: diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt index 327d229a51b2..32f8dbce5241 100644 --- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -24,6 +24,7 @@ Optional subnode properties: - simple-audio-card,convert-rate : platform specified sampling rate convert - simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) - simple-audio-card,prefix : see routing +- simple-audio-card,widgets : Please refer to widgets.txt. - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources. diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 745dc62f76ea..40068ec0e9a5 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -53,7 +53,6 @@ Example: sti_uni_player1: sti-uni-player@0x8D81000 { compatible = "st,stih407-uni-player-hdmi"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_1>; @@ -66,7 +65,6 @@ Example: sti_uni_player2: sti-uni-player@0x8D82000 { compatible = "st,stih407-uni-player-pcm-out"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; @@ -78,7 +76,6 @@ Example: sti_uni_player3: sti-uni-player@0x8D85000 { compatible = "st,stih407-uni-player-spdif"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; @@ -90,7 +87,6 @@ Example: sti_uni_reader1: sti-uni-reader@0x8D84000 { compatible = "st,stih407-uni-reader-hdmi"; - status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8D84000 0x158>; @@ -125,7 +121,6 @@ Example of audio card declaration: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sti audio card"; - status = "okay"; simple-audio-card,dai-link@0 { /* DAC */ diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index ee21da865771..fc5da6080759 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -8,6 +8,7 @@ Required properties: - compatible: should be one of the following: - "allwinner,sun4i-a10-i2s" - "allwinner,sun6i-a31-i2s" + - "allwinner,sun8i-h3-i2s" - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. @@ -22,6 +23,7 @@ Required properties: Required properties for the following compatibles: - "allwinner,sun6i-a31-i2s" + - "allwinner,sun8i-h3-i2s" - resets: phandle to the reset line for this codec Example: diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index fe0a65e6d629..70ee177901d3 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -39,5 +39,4 @@ spdif: spdif@01c21000 { clock-names = "apb", "spdif"; dmas = <&dma 0 2>, <&dma 0 2>; dma-names = "rx", "tx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt index 806ea7381483..40d94f82beb3 100644 --- a/Documentation/devicetree/bindings/sound/tas5720.txt +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -17,7 +17,6 @@ Required properties: Example: tas5720: tas5720@6c { - status = "okay"; compatible = "ti,tas5720"; reg = <0x6c>; dvdd-supply = <&vdd_3v3_reg>; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index 5e2741af27be..ca75890f0d07 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -3,7 +3,9 @@ Texas Instruments - tlv320aic32x4 Codec module The tlv320aic32x4 serial control bus communicates through I2C protocols Required properties: - - compatible: Should be "ti,tlv320aic32x4" + - compatible - "string" - One of: + "ti,tlv320aic32x4" TLV320AIC3204 + "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 - reg: I2C slave address - supply-*: Required supply regulators are: "iov" - digital IO power supply @@ -18,6 +20,8 @@ Optional properties: - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt - clocks/clock-names: Clock named 'mclk' for the master clock of the codec. See clock/clock-bindings.txt for information about the detailed format. + - aic32x4-gpio-func - <array of 5 int> + - Types are defined in include/sound/tlv320aic32x4.h Example: @@ -27,4 +31,11 @@ codec: tlv320aic32x4@18 { reg = <0x18>; clocks = <&clks 201>; clock-names = "mclk"; + aic32x4-gpio-func= < + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */ + >; }; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 47a213c411ce..ba5b45c483f5 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -26,6 +26,11 @@ Optional properties: 3 - MICBIAS output is connected to AVDD, If this node is not mentioned or if the value is incorrect, then MicBias is powered down. +- ai3x-ocmv - Output Common-Mode Voltage selection: + 0 - 1.35V, + 1 - 1.5V, + 2 - 1.65V, + 3 - 1.8V - AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the device as covered in Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/Documentation/devicetree/bindings/sound/wm8524.txt b/Documentation/devicetree/bindings/sound/wm8524.txt new file mode 100644 index 000000000000..20c62002cbcd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8524.txt @@ -0,0 +1,16 @@ +WM8524 audio CODEC + +This device does not use I2C or SPI but a simple Hardware Control Interface. + +Required properties: + + - compatible : "wlf,wm8524" + + - wlf,mute-gpios: a GPIO spec for the MUTE pin. + +Example: + +codec: wm8524@0 { + compatible = "wlf,wm8524"; + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt index 292ad5083704..3927251464f0 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt @@ -27,7 +27,6 @@ Example: interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 5>, <&dma 6>; dma-names = "tx", "rx"; - status = "okay"; }; sound { diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index 989544ea6eb5..b5a5ca4502f9 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -24,5 +24,4 @@ Example: interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 4>; dma-names = "tx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 750e29aff9bc..2c1e6a43930b 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -28,7 +28,6 @@ spi1: spi@0x4000c400 { /* USART1 */ clocks = <&cmu 20>; cs-gpios = <&gpio 51 1>; // D3 energymicro,location = <1>; - status = "ok"; ks8851@0 { compatible = "ks8851"; @@ -36,6 +35,5 @@ spi1: spi@0x4000c400 { /* USART1 */ reg = <0>; interrupt-parent = <&boardfpga>; interrupts = <4>; - status = "ok"; }; }; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 31b5b21598ff..5bf13960f7f4 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -9,6 +9,7 @@ Required properties: - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31 - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 + - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - cs-gpios : Specifies the gpio pins to be used for chipselects. diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index b785976fe98a..9ba7c5a273b4 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -38,5 +38,4 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt index bdf08e6dec9b..c212491929b5 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt @@ -34,5 +34,4 @@ spi@7000c380 { reset-names = "spi"; dmas = <&apbdma 11>, <&apbdma 11>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt index 5db9144a33c8..40d80b93e327 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt @@ -34,5 +34,4 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt index 319bad4af875..585fed90376e 100644 --- a/Documentation/devicetree/bindings/spi/sh-hspi.txt +++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt @@ -24,6 +24,5 @@ Example: interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 64ee489571c4..e865855726a2 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -6,6 +6,7 @@ Required properties: "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) + "renesas,msiof-r8a7795" (R-Car H3) "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) @@ -78,5 +79,4 @@ Example: dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt index 4c3ec13f423f..5122dc7860af 100644 --- a/Documentation/devicetree/bindings/spi/spi-clps711x.txt +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt @@ -23,7 +23,6 @@ spi@80000500 { reg = <0x80000500 0x4>; interrupts = <15>; clocks = <&clks CLPS711X_CLK_SPI>; - status = "disabled"; }; syscon3: syscon@80002200 { diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index ff5893d275a2..13b1fcc8469e 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -39,7 +39,6 @@ dspi0@4002c000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dspi0_1>; big-endian; - status = "okay"; sflash: at26df081a@0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index e0318cf92d73..236dcb0faf37 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -57,5 +57,4 @@ spi: spi@1100a000 { clock-names = "parent-clk", "sel-clk", "spi-clk"; cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>; mediatek,pad-select = <1>, <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index 4f629cc7634a..df8ec31f2f07 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -29,7 +29,6 @@ Example: cell-index = <0>; reg = <0x10600 0x28>; interrupts = <23>; - status = "disabled"; }; Example with SPI direct mode support (optionally): @@ -48,7 +47,6 @@ Example with SPI direct mode support (optionally): <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */ <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */ interrupts = <23>; - status = "disabled"; }; To enable the direct mode, the board specific 'ranges' property in the diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 83da4931d832..6e3ffacbba32 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -6,6 +6,7 @@ and display controllers using the SPI communication interface. Required Properties: - compatible: should be one of the following. + "rockchip,rv1108-spi" for rv1108 SoCs. "rockchip,rk3036-spi" for rk3036 SoCS. "rockchip,rk3066-spi" for rk3066 SoCs. "rockchip,rk3188-spi" for rk3188 SoCs. diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index de827f5a301e..484bbff5337e 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -18,7 +18,6 @@ spi1: spi@01c06000 { interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index 2ec99b86b622..ab1811354cce 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -39,7 +39,6 @@ spi0: spi@01c68000 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt index fb588b3e6a9a..f99c733d75c1 100644 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt @@ -26,7 +26,6 @@ spi1: spi@fffcc000 { clock-names = "spi_clk"; cs-gpios = <&pioB 3 0>; atmel,fifo-size = <32>; - status = "okay"; mmc-slot@0 { compatible = "mmc-spi-slot"; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 8d5665468fe7..170034e6c8b0 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -59,7 +59,6 @@ sram-controller@01c00000 { emac_sram: sram-section@8000 { compatible = "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; - status = "disabled"; }; }; }; diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index 4698e0edc205..24aacf8948c5 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -20,5 +20,4 @@ Example: compatible = "marvell,armada370-thermal"; reg = <0xd0018300 0x4 0xd0018304 0x4>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 70b4c16c7ed8..9b4c7b017495 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -77,7 +77,6 @@ Example 1): interrupts = <2 4>; clocks = <&clock 383>; clock-names = "tmu_apbif"; - status = "disabled"; vtmu-supply = <&tmu_regulator_node>; #include "exynos4412-tmu-sensor-conf.dtsi" }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt index 07a9713ae6a7..fdf5caa6229b 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -36,7 +36,6 @@ Example: clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #thermal-sensor-cells = <1>; - status = "okay"; }; thermal-zones { diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt new file mode 100644 index 000000000000..b4aa7ddb5b13 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt @@ -0,0 +1,28 @@ +NXP Low Power Timer/Pulse Width Modulation Module (TPM) + +The Timer/PWM Module (TPM) supports input capture, output compare, +and the generation of PWM signals to control electric motor and power +management applications. The counter, compare and capture registers +are clocked by an asynchronous clock that can remain enabled in low +power modes. TPM can support global counter bus where one TPM drives +the counter bus for the others, provided bit width is the same. + +Required properties: + +- compatible : should be "fsl,imx7ulp-tpm" +- reg : Specifies base physical address and size of the register sets + for the clock event device and clock source device. +- interrupts : Should be the clock event device interrupt. +- clocks : The clocks provided by the SoC to drive the timer, must contain + an entry for each entry in clock-names. +- clock-names : Must include the following entries: "igp" and "per". + +Example: +tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>, + <&clks IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; +}; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index 1a05c1b243c1..6ca6b9e582a0 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -12,46 +12,29 @@ datasheets. Required Properties: - compatible: must contain one or more of the following: - - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT - (CMT0) - - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT - (CMT0) - - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT - (CMT0) - - "renesas,cmt-32" for all 32-bit CMT without fast clock support - (CMT0 on sh7372, sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-32-* entries. - - - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support - (CMT[234] on sh7372, sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-32-fast-* entries. - - - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT - (CMT1) - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT (CMT1) - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT (CMT1) - "renesas,cmt-48" for all non-second generation 48-bit CMT - (CMT1 on sh7372, sh73a0 and r8a7740) + (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. - - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-gen2" for all second generation 48-bit CMT - (CMT[01] on r8a73a4, r8a7790 and r8a7791) - This is a fallback for the renesas,cmt-48-r8a73a4, - renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries. + - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4. + - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790. + - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790. + - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791. + - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791. + - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793. + - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793. + - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794. + - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794. + + - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. + - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. + These are fallbacks for r8a73a4 and all the R-Car Gen2 + entries listed above. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. @@ -59,21 +42,29 @@ Required Properties: in clock-names. - clock-names: must contain "fck" for the functional clock. - - renesas,channels-mask: bitmask of the available channels. - -Example: R8A7790 (R-Car H2) CMT0 node - - CMT0 on R8A7790 implements hardware channels 5 and 6 only and names - them channels 0 and 1 in the documentation. +Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, <0 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; + }; - renesas,channels-mask = <0x60>; + cmt1: timer@e6130000 { + compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clock-names = "fck"; }; diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index 35f406dd86b6..af284fbd4d23 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -21,6 +21,16 @@ adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) ams,iaq-core AMS iAQ-Core VOC Sensor +amstaos,tsl2571 AMS/TAOS ALS and proximity sensor +amstaos,tsl2671 AMS/TAOS ALS and proximity sensor +amstaos,tmd2671 AMS/TAOS ALS and proximity sensor +amstaos,tsl2771 AMS/TAOS ALS and proximity sensor +amstaos,tmd2771 AMS/TAOS ALS and proximity sensor +amstaos,tsl2572 AMS/TAOS ALS and proximity sensor +amstaos,tsl2672 AMS/TAOS ALS and proximity sensor +amstaos,tmd2672 AMS/TAOS ALS and proximity sensor +amstaos,tsl2772 AMS/TAOS ALS and proximity sensor +amstaos,tmd2772 AMS/TAOS ALS and proximity sensor at,24c08 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor @@ -36,7 +46,9 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat +devantech,srf02 Devantech SRF02 ultrasonic ranger in I2C mode devantech,srf08 Devantech SRF08 ultrasonic ranger +devantech,srf10 Devantech SRF10 ultrasonic ranger dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer @@ -54,6 +66,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator @@ -168,6 +181,7 @@ st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC +ti,amc6821 Temperature Monitoring and Fan Control ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt index 3bf58c20fe94..9a5b311f4434 100644 --- a/Documentation/devicetree/bindings/unittest.txt +++ b/Documentation/devicetree/bindings/unittest.txt @@ -10,7 +10,6 @@ All other properties are optional. Example: unittest { compatible = "unittest"; - status = "okay"; }; 2) OF unittest i2c adapter platform device @@ -25,7 +24,6 @@ Children nodes contain unittest i2c devices. Example: unittest-i2c-bus { compatible = "unittest-i2c-bus"; - status = "okay"; }; 3) OF unittest i2c device @@ -40,7 +38,6 @@ All other properties are optional Example: unittest-i2c-dev { compatible = "unittest-i2c-dev"; - status = "okay"; }; 4) OF unittest i2c mux device @@ -55,7 +52,6 @@ Children nodes contain unittest i2c bus nodes per channel. Example: unittest-i2c-mux { compatible = "unittest-i2c-mux"; - status = "okay"; #address-cells = <1>; #size-cells = <0>; channel-0 { @@ -65,7 +61,6 @@ Example: i2c-dev { reg = <8>; compatible = "unittest-i2c-dev"; - status = "okay"; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index d9b42da016f3..cb2bd83fa89a 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -25,5 +25,4 @@ Example: phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 20c2ff2ba07e..16920d78e1b8 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -4,9 +4,9 @@ - reg: offset and length of the usbss register sets - ti,hwmods : must be "usb_otg_hs" -The glue layer contains multiple child nodes. It is required the have +The glue layer contains multiple child nodes. It is required to have at least a control module node, USB node and a PHY node. The second USB -node and its PHY node is optional. The DMA node is also optional. +node and its PHY node are optional. The DMA node is also optional. Reset module ~~~~~~~~~~~~ diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt new file mode 100644 index 000000000000..63e63af3bf59 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt @@ -0,0 +1,29 @@ +Broadcom USB Device Controller (BDC) +==================================== + +Required properties: + +- compatible: must be one of: + "brcm,bdc-v0.16" + "brcm,bdc" +- reg: the base register address and length +- interrupts: the interrupt line for this controller + +Optional properties: + +On Broadcom STB platforms, these properties are required: + +- phys: phandle to one or two USB PHY blocks + NOTE: Some SoC's have a single phy and some have + USB 2.0 and USB 3.0 phys +- clocks: phandle to the functional clock of this block + +Example: + + bdc@f0b02000 { + compatible = "brcm,bdc-v0.16"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt index 717c5f656237..9ce22551b2b3 100644 --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt @@ -42,7 +42,6 @@ Example: usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <0>; - status = "okay"; }; usb0: usb@200000 { compatible = "ti,da830-musb"; @@ -66,7 +65,6 @@ Example: "rx1", "rx2", "rx3", "rx4", "tx1", "tx2", "tx3", "tx4"; - status = "okay"; cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index 50dee3b44665..df0e02e1ee43 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -42,7 +42,6 @@ or "device". Example: st_dwc3: dwc3@8f94000 { - status = "disabled"; compatible = "st,stih407-dwc3"; reg = <0x08f94000 0x1000>, <0x110 0x4>; reg-names = "reg-glue", "syscfg-reg"; diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt index 30361b32a460..4aae5b2cef56 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -18,7 +18,6 @@ Example device node: usb@0 { #address-cells = <0x2>; #size-cells = <0x1>; - status = "okay"; compatible = "xlnx,zynqmp-dwc3"; clock-names = "bus_clk" "ref_clk"; clocks = <&clk125>, <&clk125>; diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 410d922cfdd7..9feea6c3e4d9 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -31,7 +31,6 @@ Example: clocks = <&clk_s_a1_ls 0>; phys = <&usb2_phy>; phy-names = "usb"; - status = "okay"; resets = <&powerdown STIH416_USB1_POWERDOWN>, <&softreset STIH416_USB1_SOFTRESET>; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 78ebebb66dad..c97374315049 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -40,7 +40,6 @@ Example: port@0 { reg = <0>; phys = <&usb2phy 1>; - status = "disabled"; }; }; @@ -75,7 +74,6 @@ Example: port@0 { reg = <0>; phys = <&usb2phy 1>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt new file mode 100644 index 000000000000..472facfa5a71 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt @@ -0,0 +1,29 @@ +Fairchild FUSB302 Type-C Port controllers + +Required properties : +- compatible : "fcs,fusb302" +- reg : I2C slave address +- interrupts : Interrupt specifier + +Optional properties : +- fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as sink +- fcs,max-sink-microamp : Maximum current to negotiate when configured as sink +- fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink + If this is less then max-sink-microvolt * + max-sink-microamp then the configured current will + be clamped. +- fcs,operating-sink-microwatt : + Minimum amount of power accepted from a sink + when negotiating + +Example: + +fusb302: typec-portc@54 { + compatible = "fcs,fusb302"; + reg = <0x54>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + fcs,max-sink-microvolt = <12000000>; + fcs,max-sink-microamp = <3000000>; + fcs,max-sink-microwatt = <36000000>; +}; diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt index 5405d99d9aaa..ecd607dacba5 100644 --- a/Documentation/devicetree/bindings/usb/isp1301.txt +++ b/Documentation/devicetree/bindings/usb/isp1301.txt @@ -21,5 +21,4 @@ Example: interrupt-parent = <&mic>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; transceiver = <&isp1301>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt index 60527d335b58..f96e09f784cc 100644 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -12,8 +12,21 @@ Required properties: MPU. - ranges: allows valid 1:1 translation between child's address space and parent's address space. - - clocks: Clock IDs array as required by the controller. - - clock-names: names of clocks correseponding to IDs in the clock property. + +SoC-specific Required Properties: +The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E +SoCs only: + +- clocks: Clock ID for USB functional clock. +- clock-names: Must be "usb". + + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the USB device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Sub-nodes: The dwc3 core should be added as subnode to Keystone DWC3 glue. @@ -31,7 +44,6 @@ Example: clock-names = "usb"; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; ranges; - status = "disabled"; dwc3@2690000 { compatible = "synopsys,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 0acfc8acbea1..5611a2e4ddf0 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -11,7 +11,11 @@ into two parts. ------------------------------------------------------------------------ Required properties: - - compatible : should contain "mediatek,mt8173-xhci" + - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", + soc-model is the name of SoC, such as mt8173, mt2712 etc, when using + "mediatek,mtk-xhci" compatible string, you need SoC specific ones in + addition, one of: + - "mediatek,mt8173-xhci" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - interrupts : interrupt used by the controller @@ -68,10 +72,14 @@ usb30: usb@11270000 { In the case, xhci is added as subnode to mtu3. An example and the DT binding details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +Documentation/devicetree/bindings/usb/mediatek,mtu3.txt Required properties: - - compatible : should contain "mediatek,mt8173-xhci" + - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", + soc-model is the name of SoC, such as mt8173, mt2712 etc, when using + "mediatek,mtk-xhci" compatible string, you need SoC specific ones in + addition, one of: + - "mediatek,mt8173-xhci" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for xHCI MAC - interrupts : interrupt used by the host controller diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 1d7c3bc677f7..49f54767cd21 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -1,7 +1,11 @@ The device node for Mediatek USB3.0 DRD controller Required properties: - - compatible : should be "mediatek,mt8173-mtu3" + - compatible : should be "mediatek,<soc-model>-mtu3", "mediatek,mtu3", + soc-model is the name of SoC, such as mt8173, mt2712 etc, + when using "mediatek,mtu3" compatible string, you need SoC specific + ones in addition, one of: + - "mediatek,mt8173-mtu3" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for device IP and "ippc" for IP port control - interrupts : interrupt used by the device IP @@ -44,7 +48,7 @@ Optional properties: Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example if host mode is enabled. The DT binding details of xhci can be found in: -Documentation/devicetree/bindings/usb/mt8173-xhci.txt +Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt Example: ssusb: usb@11271000 { @@ -71,7 +75,6 @@ ssusb: usb@11271000 { #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usb_host: xhci@11270000 { compatible = "mediatek,mt8173-xhci"; @@ -82,6 +85,5 @@ ssusb: usb@11271000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index 6d8393748da2..d893ec9131c3 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -29,7 +29,6 @@ Example: clock-names = "ic", "clk48"; phys = <&usb2_phy>; phy-names = "usb"; - status = "okay"; resets = <&powerdown STIH416_USB0_POWERDOWN>, <&softreset STIH416_USB0_SOFTRESET>; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index 73cc0963e823..bc8a2fa5d2bf 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -29,7 +29,6 @@ Example device nodes: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; ss_phy: phy@100f8830 { @@ -39,7 +38,6 @@ Example device nodes: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; usb3_0: usb30@0 { @@ -51,7 +49,6 @@ Example device nodes: ranges; - status = "ok"; dwc3@10000000 { compatible = "snps,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index 8d52766f07b9..e28025883b79 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -3,20 +3,30 @@ Renesas Electronics USB3.0 Peripheral driver Required properties: - compatible: Must contain one of the following: - "renesas,r8a7795-usb3-peri" + - "renesas,r8a7796-usb3-peri" + - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible + device + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: Base address and length of the register for the USB3.0 Peripheral - interrupts: Interrupt specifier for the USB3.0 Peripheral - clocks: clock phandle and specifier pair -Example: +Example of R-Car H3 ES1.x: usb3_peri0: usb@ee020000 { - compatible = "renesas,r8a7795-usb3-peri"; + compatible = "renesas,r8a7795-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; reg = <0 0xee020000 0 0x400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 328>; }; usb3_peri1: usb@ee060000 { - compatible = "renesas,r8a7795-usb3-peri"; + compatible = "renesas,r8a7795-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; reg = <0 0xee060000 0 0x400>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 327>; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 0536a938e3ab..50a31536e975 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -29,13 +29,11 @@ Example device nodes: #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usbdrd_dwc3_0: dwc3@fe800000 { compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "otg"; - status = "disabled"; }; }; @@ -48,12 +46,10 @@ Example device nodes: #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usbdrd_dwc3_1: dwc3@fe900000 { compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "otg"; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 1c35e7b665e1..ce02cebac26a 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -2,7 +2,7 @@ Generic USB Device Properties Usually, we only use device tree for hard wired USB device. The reference binding doc is from: -http://www.firmware.org/1275/bindings/usb/usb-1_0.ps +http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps Required properties: - compatible: usbVID,PID. The textual representation of VID, PID shall @@ -16,7 +16,6 @@ Required properties: Example: &usb1 { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index daf465bef758..401ed98cab18 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -9,6 +9,7 @@ actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH adapteva Adapteva, Inc. +adaptrum Adaptrum, Inc. adh AD Holdings Plc. adi Analog Devices, Inc. advantech Advantech Corporation @@ -88,6 +89,7 @@ dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG domintech Domintech Co., Ltd. +dongwoon Dongwoon Anatech dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB @@ -175,6 +177,7 @@ kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation lacie LaCie lantiq Lantiq Semiconductor +lattice Lattice Semiconductor lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation @@ -195,6 +198,7 @@ mediatek MediaTek Inc. megachips MegaChips melexis Melexis N.V. melfas MELFAS Inc. +mellanox Mellanox Technologies memsic MEMSIC Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. @@ -206,7 +210,7 @@ miramems MiraMEMS Sensing Technology Co., Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. motorola Motorola, Inc. -moxa Moxa +moxa Moxa Inc. mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. @@ -249,6 +253,7 @@ oxsemi Oxford Semiconductor, Ltd. panasonic Panasonic Corporation parade Parade Technologies Inc. pericom Pericom Technology Inc. +pervasive Pervasive Displays, Inc. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 @@ -341,6 +346,7 @@ tpo TPO tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited +tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics udoo Udoo diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt index ecf42c07684d..cbaa6467ab2c 100644 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt @@ -15,5 +15,4 @@ owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; clocks = <&clks 159>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt index f7cc7c060910..4fec1e3725b4 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt @@ -31,5 +31,4 @@ Example: atmel,watchdog-type = "hardware"; atmel,dbg-halt; atmel,idle-halt; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index 86fa6de1019b..711a880b3d3b 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -48,5 +48,4 @@ Example: atmel,idle-halt; atmel,max-heartbeat-sec = <16>; atmel,min-heartbeat-sec = <0>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt index 858ed9221ac4..c1b67a78f00c 100644 --- a/Documentation/devicetree/bindings/watchdog/marvel.txt +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt @@ -41,6 +41,5 @@ Example: reg = <0x20300 0x28>, <0x20108 0x4>; interrupts = <3>; timeout-sec = <10>; - status = "okay"; clocks = <&gate_clk 7>; }; diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt index 299d0923537b..1d11b9002ef8 100644 --- a/Documentation/devicetree/bindings/xilinx.txt +++ b/Documentation/devicetree/bindings/xilinx.txt @@ -281,6 +281,8 @@ capabilities of the underlying ICAP hardware differ between different families. May be 'virtex2p', 'virtex4', or 'virtex5'. + - compatible : should contain "xlnx,xps-hwicap-1.00.a" or + "xlnx,opb-hwicap-1.00.b". vi) Xilinx Uart 16550 diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index fb740445199f..417f91110010 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -1282,7 +1282,7 @@ hierarchy and routing of interrupts in the hardware. The interrupt tree model is fully described in the document "Open Firmware Recommended Practice: Interrupt Mapping Version 0.9". The document is available at: -<http://www.openfirmware.org/ofwg/practice/> +<http://www.devicetree.org/open-firmware/practice/> 1) interrupts property ---------------------- diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt index e33bc1c8ed2c..5dbe054a40ad 100644 --- a/Documentation/dmaengine/provider.txt +++ b/Documentation/dmaengine/provider.txt @@ -181,13 +181,6 @@ Currently, the types available are: - Used by the client drivers to register a callback that will be called on a regular basis through the DMA controller interrupt - * DMA_SG - - The device supports memory to memory scatter-gather - transfers. - - Even though a plain memcpy can look like a particular case of a - scatter-gather transfer, with a single chunk to transfer, it's a - distinct transaction type in the mem2mem transfers case - * DMA_PRIVATE - The devices only supports slave transfers, and as such isn't available for async transfers. @@ -395,6 +388,13 @@ where to put them) when DMA_CTRL_REUSE is already set - Terminating the channel + * DMA_PREP_CMD + - If set, the client driver tells DMA controller that passed data in DMA + API is command data. + - Interpretation of command data is DMA controller specific. It can be + used for issuing commands to other peripherals/register reads/register + writes for which the descriptor should be in different format from + normal data descriptors. General Design Notes -------------------- diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index 84e8e8a9cbdb..a2417633fdd8 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -19,6 +19,110 @@ Finally, there are thousands of plain text documentation files scattered around ``Documentation``. Some of these will likely be converted to reStructuredText over time, but the bulk of them will remain in plain text. +.. _sphinx_install: + +Sphinx Install +============== + +The ReST markups currently used by the Documentation/ files are meant to be +built with ``Sphinx`` version 1.3 or upper. If you're desiring to build +PDF outputs, it is recommended to use version 1.4.6 or upper. + +There's a script that checks for the Spinx requirements. Please see +:ref:`sphinx-pre-install` for further details. + +Most distributions are shipped with Sphinx, but its toolchain is fragile, +and it is not uncommon that upgrading it or some other Python packages +on your machine would cause the documentation build to break. + +A way to get rid of that is to use a different version than the one shipped +on your distributions. In order to do that, it is recommended to install +Sphinx inside a virtual environment, using ``virtualenv-3`` +or ``virtualenv``, depending on how your distribution packaged Python 3. + +.. note:: + + #) Sphinx versions below 1.5 don't work properly with Python's + docutils version 0.13.1 or upper. So, if you're willing to use + those versions, you should run ``pip install 'docutils==0.12'``. + + #) It is recommended to use the RTD theme for html output. Depending + on the Sphinx version, it should be installed in separate, + with ``pip install sphinx_rtd_theme``. + + #) Some ReST pages contain math expressions. Due to the way Sphinx work, + those expressions are written using LaTeX notation. It needs texlive + installed with amdfonts and amsmath in order to evaluate them. + +In summary, if you want to install Sphinx version 1.4.9, you should do:: + + $ virtualenv sphinx_1.4 + $ . sphinx_1.4/bin/activate + (sphinx_1.4) $ pip install -r Documentation/sphinx/requirements.txt + +After running ``. sphinx_1.4/bin/activate``, the prompt will change, +in order to indicate that you're using the new environment. If you +open a new shell, you need to rerun this command to enter again at +the virtual environment before building the documentation. + +Image output +------------ + +The kernel documentation build system contains an extension that +handles images on both GraphViz and SVG formats (see +:ref:`sphinx_kfigure`). + +For it to work, you need to install both GraphViz and ImageMagick +packages. If those packages are not installed, the build system will +still build the documentation, but won't include any images at the +output. + +PDF and LaTeX builds +-------------------- + +Such builds are currently supported only with Sphinx versions 1.4 and upper. + +For PDF and LaTeX output, you'll also need ``XeLaTeX`` version 3.14159265. + +Depending on the distribution, you may also need to install a series of +``texlive`` packages that provide the minimal set of functionalities +required for ``XeLaTeX`` to work. + +.. _sphinx-pre-install: + +Checking for Sphinx dependencies +-------------------------------- + +There's a script that automatically check for Sphinx dependencies. If it can +recognize your distribution, it will also give a hint about the install +command line options for your distro:: + + $ ./scripts/sphinx-pre-install + Checking if the needed tools for Fedora release 26 (Twenty Six) are available + Warning: better to also install "texlive-luatex85". + You should run: + + sudo dnf install -y texlive-luatex85 + /usr/bin/virtualenv sphinx_1.4 + . sphinx_1.4/bin/activate + pip install -r Documentation/sphinx/requirements.txt + + Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468. + +By default, it checks all the requirements for both html and PDF, including +the requirements for images, math expressions and LaTeX build, and assumes +that a virtual Python environment will be used. The ones needed for html +builds are assumed to be mandatory; the others to be optional. + +It supports two optional parameters: + +``--no-pdf`` + Disable checks for PDF; + +``--no-virtualenv`` + Use OS packaging for Sphinx instead of Python virtual environment. + + Sphinx Build ============ @@ -118,7 +222,7 @@ Here are some specific guidelines for the kernel documentation: the C domain ------------ -The `Sphinx C Domain`_ (name c) is suited for documentation of C API. E.g. a +The **Sphinx C Domain** (name c) is suited for documentation of C API. E.g. a function prototype: .. code-block:: rst @@ -229,6 +333,7 @@ Rendered as: - column 3 +.. _sphinx_kfigure: Figures & Images ================ diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 358b47c06ad4..2228fcc8e29f 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -259,5 +259,4 @@ wakeup.bin wakeup.elf wakeup.lds zImage* -zconf.hash.c zoffset.h diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst index ab82250c7727..73fa7d42bbba 100644 --- a/Documentation/driver-api/basics.rst +++ b/Documentation/driver-api/basics.rst @@ -4,7 +4,7 @@ Driver Basics Driver Entry and Exit points ---------------------------- -.. kernel-doc:: include/linux/init.h +.. kernel-doc:: include/linux/module.h :internal: Driver device table @@ -103,9 +103,6 @@ Kernel utility functions .. kernel-doc:: kernel/panic.c :export: -.. kernel-doc:: kernel/sys.c - :export: - .. kernel-doc:: kernel/rcu/tree.c :export: diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index 31671b469627..dc384f2f7f34 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -139,9 +139,6 @@ DMA Fences Seqno Hardware Fences ~~~~~~~~~~~~~~~~~~~~~ -.. kernel-doc:: drivers/dma-buf/seqno-fence.c - :export: - .. kernel-doc:: include/linux/seqno-fence.h :internal: diff --git a/Documentation/driver-api/gpio.rst b/Documentation/driver-api/gpio.rst new file mode 100644 index 000000000000..6dd4aa647f27 --- /dev/null +++ b/Documentation/driver-api/gpio.rst @@ -0,0 +1,45 @@ +=================================== +General Purpose Input/Output (GPIO) +=================================== + +Core +==== + +.. kernel-doc:: include/linux/gpio/driver.h + :internal: + +.. kernel-doc:: drivers/gpio/gpiolib.c + :export: + +Legacy API +========== + +The functions listed in this section are deprecated. The GPIO descriptor based +API described above should be used in new code. + +.. kernel-doc:: drivers/gpio/gpiolib-legacy.c + :export: + +ACPI support +============ + +.. kernel-doc:: drivers/gpio/gpiolib-acpi.c + :export: + +Device tree support +=================== + +.. kernel-doc:: drivers/gpio/gpiolib-of.c + :export: + +Device-managed API +================== + +.. kernel-doc:: drivers/gpio/devres.c + :export: + +sysfs helpers +============= + +.. kernel-doc:: drivers/gpio/gpiolib-sysfs.c + :export: diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 7c94ab50afed..9c20624842b7 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -44,6 +44,7 @@ available subsections can be seen below. uio-howto firmware/index pinctl + gpio misc_devices .. only:: subproject and html diff --git a/Documentation/driver-api/miscellaneous.rst b/Documentation/driver-api/miscellaneous.rst index 8da7d115bafc..304ffb146cf9 100644 --- a/Documentation/driver-api/miscellaneous.rst +++ b/Documentation/driver-api/miscellaneous.rst @@ -47,4 +47,3 @@ used by one consumer at a time. .. kernel-doc:: drivers/pwm/core.c :export: - diff --git a/Documentation/driver-api/s390-drivers.rst b/Documentation/driver-api/s390-drivers.rst index 7060da136095..ecf8851d3565 100644 --- a/Documentation/driver-api/s390-drivers.rst +++ b/Documentation/driver-api/s390-drivers.rst @@ -75,7 +75,7 @@ The channel-measurement facility provides a means to collect measurement data which is made available by the channel subsystem for each channel attached device. -.. kernel-doc:: arch/s390/include/asm/cmb.h +.. kernel-doc:: arch/s390/include/uapi/asm/cmb.h :internal: .. kernel-doc:: drivers/s390/cio/cmf.c diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst index 859fb672319f..5a2aa7a377d9 100644 --- a/Documentation/driver-api/scsi.rst +++ b/Documentation/driver-api/scsi.rst @@ -224,14 +224,6 @@ mid to lowlevel SCSI driver interface .. kernel-doc:: drivers/scsi/hosts.c :export: -drivers/scsi/constants.c -~~~~~~~~~~~~~~~~~~~~~~~~ - -mid to lowlevel SCSI driver interface - -.. kernel-doc:: drivers/scsi/constants.c - :export: - Transport classes ----------------- diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 30e04f7a690d..69f08c0f23a8 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -312,6 +312,7 @@ IRQ devm_irq_alloc_descs_from() devm_irq_alloc_generic_chip() devm_irq_setup_generic_chip() + devm_irq_sim_init() LED devm_led_classdev_register() diff --git a/Documentation/errseq.rst b/Documentation/errseq.rst new file mode 100644 index 000000000000..4c29bd5afbc5 --- /dev/null +++ b/Documentation/errseq.rst @@ -0,0 +1,149 @@ +The errseq_t datatype +===================== +An errseq_t is a way of recording errors in one place, and allowing any +number of "subscribers" to tell whether it has changed since a previous +point where it was sampled. + +The initial use case for this is tracking errors for file +synchronization syscalls (fsync, fdatasync, msync and sync_file_range), +but it may be usable in other situations. + +It's implemented as an unsigned 32-bit value. The low order bits are +designated to hold an error code (between 1 and MAX_ERRNO). The upper bits +are used as a counter. This is done with atomics instead of locking so that +these functions can be called from any context. + +Note that there is a risk of collisions if new errors are being recorded +frequently, since we have so few bits to use as a counter. + +To mitigate this, the bit between the error value and counter is used as +a flag to tell whether the value has been sampled since a new value was +recorded. That allows us to avoid bumping the counter if no one has +sampled it since the last time an error was recorded. + +Thus we end up with a value that looks something like this:: + + bit: 31..13 12 11..0 + +-----------------+----+----------------+ + | counter | SF | errno | + +-----------------+----+----------------+ + +The general idea is for "watchers" to sample an errseq_t value and keep +it as a running cursor. That value can later be used to tell whether +any new errors have occurred since that sampling was done, and atomically +record the state at the time that it was checked. This allows us to +record errors in one place, and then have a number of "watchers" that +can tell whether the value has changed since they last checked it. + +A new errseq_t should always be zeroed out. An errseq_t value of all zeroes +is the special (but common) case where there has never been an error. An all +zero value thus serves as the "epoch" if one wishes to know whether there +has ever been an error set since it was first initialized. + +API usage +========= +Let me tell you a story about a worker drone. Now, he's a good worker +overall, but the company is a little...management heavy. He has to +report to 77 supervisors today, and tomorrow the "big boss" is coming in +from out of town and he's sure to test the poor fellow too. + +They're all handing him work to do -- so much he can't keep track of who +handed him what, but that's not really a big problem. The supervisors +just want to know when he's finished all of the work they've handed him so +far and whether he made any mistakes since they last asked. + +He might have made the mistake on work they didn't actually hand him, +but he can't keep track of things at that level of detail, all he can +remember is the most recent mistake that he made. + +Here's our worker_drone representation:: + + struct worker_drone { + errseq_t wd_err; /* for recording errors */ + }; + +Every day, the worker_drone starts out with a blank slate:: + + struct worker_drone wd; + + wd.wd_err = (errseq_t)0; + +The supervisors come in and get an initial read for the day. They +don't care about anything that happened before their watch begins:: + + struct supervisor { + errseq_t s_wd_err; /* private "cursor" for wd_err */ + spinlock_t s_wd_err_lock; /* protects s_wd_err */ + } + + struct supervisor su; + + su.s_wd_err = errseq_sample(&wd.wd_err); + spin_lock_init(&su.s_wd_err_lock); + +Now they start handing him tasks to do. Every few minutes they ask him to +finish up all of the work they've handed him so far. Then they ask him +whether he made any mistakes on any of it:: + + spin_lock(&su.su_wd_err_lock); + err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err); + spin_unlock(&su.su_wd_err_lock); + +Up to this point, that just keeps returning 0. + +Now, the owners of this company are quite miserly and have given him +substandard equipment with which to do his job. Occasionally it +glitches and he makes a mistake. He sighs a heavy sigh, and marks it +down:: + + errseq_set(&wd.wd_err, -EIO); + +...and then gets back to work. The supervisors eventually poll again +and they each get the error when they next check. Subsequent calls will +return 0, until another error is recorded, at which point it's reported +to each of them once. + +Note that the supervisors can't tell how many mistakes he made, only +whether one was made since they last checked, and the latest value +recorded. + +Occasionally the big boss comes in for a spot check and asks the worker +to do a one-off job for him. He's not really watching the worker +full-time like the supervisors, but he does need to know whether a +mistake occurred while his job was processing. + +He can just sample the current errseq_t in the worker, and then use that +to tell whether an error has occurred later:: + + errseq_t since = errseq_sample(&wd.wd_err); + /* submit some work and wait for it to complete */ + err = errseq_check(&wd.wd_err, since); + +Since he's just going to discard "since" after that point, he doesn't +need to advance it here. He also doesn't need any locking since it's +not usable by anyone else. + +Serializing errseq_t cursor updates +=================================== +Note that the errseq_t API does not protect the errseq_t cursor during a +check_and_advance_operation. Only the canonical error code is handled +atomically. In a situation where more than one task might be using the +same errseq_t cursor at the same time, it's important to serialize +updates to that cursor. + +If that's not done, then it's possible for the cursor to go backward +in which case the same error could be reported more than once. + +Because of this, it's often advantageous to first do an errseq_check to +see if anything has changed, and only later do an +errseq_check_and_advance after taking the lock. e.g.:: + + if (errseq_check(&wd.wd_err, READ_ONCE(su.s_wd_err)) { + /* su.s_wd_err is protected by s_wd_err_lock */ + spin_lock(&su.s_wd_err_lock); + err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err); + spin_unlock(&su.s_wd_err_lock); + } + +That avoids the spinlock in the common case where nothing has changed +since the last time it was checked. diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index 5e97a89420ef..dfb638c2f842 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -25,7 +25,7 @@ | mn10300: | ok | | nios2: | ok | | openrisc: | ok | - | parisc: | TODO | + | parisc: | ok | | powerpc: | ok | | s390: | ok | | score: | TODO | diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index aed6b94160b1..0eb31de3a2c1 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -151,8 +151,6 @@ To define an object, a structure of the following type should be filled out: void (*mark_pages_cached)(void *cookie_netfs_data, struct address_space *mapping, struct pagevec *cached_pvec); - - void (*now_uncached)(void *cookie_netfs_data); }; This has the following fields: diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt index a7e6e14aeb08..3be3b266be41 100644 --- a/Documentation/filesystems/dax.txt +++ b/Documentation/filesystems/dax.txt @@ -63,9 +63,8 @@ Filesystem support consists of - implementing an mmap file operation for DAX files which sets the VM_MIXEDMAP and VM_HUGEPAGE flags on the VMA, and setting the vm_ops to include handlers for fault, pmd_fault, page_mkwrite, pfn_mkwrite. These - handlers should probably call dax_iomap_fault() (for fault and page_mkwrite - handlers), dax_iomap_pmd_fault(), dax_pfn_mkwrite() passing the appropriate - iomap operations. + handlers should probably call dax_iomap_fault() passing the appropriate + fault size and iomap operations. - calling iomap_zero_range() passing appropriate iomap operations instead of block_truncate_page() for DAX files - ensuring that there is sufficient locking between reads, writes, diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 73e7d91f03dc..405a3df759b3 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -829,9 +829,7 @@ struct address_space_operations { swap_activate: Called when swapon is used on a file to allocate space if necessary and pin the block lookup information in memory. A return value of zero indicates success, - in which case this file can be used to back swapspace. The - swapspace operations will be proxied to this address space's - ->swap_{out,in} methods. + in which case this file can be used to back swapspace. swap_deactivate: Called during swapoff on files where swap_activate was successful. diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt index 306513251713..9a78d385b92e 100644 --- a/Documentation/gpio/drivers-on-gpio.txt +++ b/Documentation/gpio/drivers-on-gpio.txt @@ -84,6 +84,11 @@ hardware descriptions such as device tree or ACPI: NAND flash MTD subsystem and provides chip access and partition parsing like any other NAND driving hardware. +- ps2-gpio: drivers/input/serio/ps2-gpio.c is used to drive a PS/2 (IBM) serio + bus, data and clock line, by bit banging two GPIO lines. It will appear as + any other serio bus to the system and makes it possible to connect drivers + for e.g. keyboards and other PS/2 protocol based devices. + Apart from this there are special GPIO drivers in subsystems like MMC/SD to read card detect and write protect GPIO lines, and in the TTY serial subsystem to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 0d936c67bf7d..5ee9674fb9e9 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -201,6 +201,8 @@ drivers. Open/Close, File Operations and IOCTLs ====================================== +.. _drm_driver_fops: + File Operations --------------- diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 7c5e2549a58a..13dd237418cc 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -296,3 +296,12 @@ Auxiliary Modeset Helpers .. kernel-doc:: drivers/gpu/drm/drm_modeset_helper.c :export: + +Framebuffer GEM Helper Reference +================================ + +.. kernel-doc:: drivers/gpu/drm/drm_gem_framebuffer_helper.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/drm_gem_framebuffer_helper.c + :export: diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 2d77c9580164..307284125d7a 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -523,9 +523,6 @@ Color Management Properties .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :doc: overview -.. kernel-doc:: include/drm/drm_color_mgmt.h - :internal: - .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :export: @@ -554,60 +551,8 @@ various modules/drivers. Vertical Blanking ================= -Vertical blanking plays a major role in graphics rendering. To achieve -tear-free display, users must synchronize page flips and/or rendering to -vertical blanking. The DRM API offers ioctls to perform page flips -synchronized to vertical blanking and wait for vertical blanking. - -The DRM core handles most of the vertical blanking management logic, -which involves filtering out spurious interrupts, keeping race-free -blanking counters, coping with counter wrap-around and resets and -keeping use counts. It relies on the driver to generate vertical -blanking interrupts and optionally provide a hardware vertical blanking -counter. Drivers must implement the following operations. - -- int (\*enable_vblank) (struct drm_device \*dev, int crtc); void - (\*disable_vblank) (struct drm_device \*dev, int crtc); - Enable or disable vertical blanking interrupts for the given CRTC. - -- u32 (\*get_vblank_counter) (struct drm_device \*dev, int crtc); - Retrieve the value of the vertical blanking counter for the given - CRTC. If the hardware maintains a vertical blanking counter its value - should be returned. Otherwise drivers can use the - :c:func:`drm_vblank_count()` helper function to handle this - operation. - -Drivers must initialize the vertical blanking handling core with a call -to :c:func:`drm_vblank_init()` in their load operation. - -Vertical blanking interrupts can be enabled by the DRM core or by -drivers themselves (for instance to handle page flipping operations). -The DRM core maintains a vertical blanking use count to ensure that the -interrupts are not disabled while a user still needs them. To increment -the use count, drivers call :c:func:`drm_vblank_get()`. Upon -return vertical blanking interrupts are guaranteed to be enabled. - -To decrement the use count drivers call -:c:func:`drm_vblank_put()`. Only when the use count drops to zero -will the DRM core disable the vertical blanking interrupts after a delay -by scheduling a timer. The delay is accessible through the -vblankoffdelay module parameter or the ``drm_vblank_offdelay`` global -variable and expressed in milliseconds. Its default value is 5000 ms. -Zero means never disable, and a negative value means disable -immediately. Drivers may override the behaviour by setting the -:c:type:`struct drm_device <drm_device>` -vblank_disable_immediate flag, which when set causes vblank interrupts -to be disabled immediately regardless of the drm_vblank_offdelay -value. The flag should only be set if there's a properly working -hardware vblank counter present. - -When a vertical blanking interrupt occurs drivers only need to call the -:c:func:`drm_handle_vblank()` function to account for the -interrupt. - -Resources allocated by :c:func:`drm_vblank_init()` must be freed -with a call to :c:func:`drm_vblank_cleanup()` in the driver unload -operation handler. +.. kernel-doc:: drivers/gpu/drm/drm_vblank.c + :doc: vblank handling Vertical Blanking and Interrupt Handling Functions Reference ------------------------------------------------------------ diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 9412798645c1..b08e9dcd9177 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -191,7 +191,7 @@ acquired and release by :c:func:`calling drm_gem_object_get()` and holding the lock. When the last reference to a GEM object is released the GEM core calls -the :c:type:`struct drm_driver <drm_driver>` gem_free_object +the :c:type:`struct drm_driver <drm_driver>` gem_free_object_unlocked operation. That operation is mandatory for GEM-enabled drivers and must free the GEM object and all associated resources. @@ -492,7 +492,7 @@ DRM Sync Objects :doc: Overview .. kernel-doc:: include/drm/drm_syncobj.h - :export: + :internal: .. kernel-doc:: drivers/gpu/drm/drm_syncobj.c :export: diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 858457567d3d..679373b4a03f 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -160,6 +160,8 @@ other hand, a driver requires shared state between clients which is visible to user-space and accessible beyond open-file boundaries, they cannot support render nodes. +.. _drm_driver_ioctl: + IOCTL Support on Device Nodes ============================= diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 9c7ed3e3f1e9..2e7ee0313c1c 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -417,6 +417,10 @@ integrate with drm/i915 and to handle the `DRM_I915_PERF_OPEN` ioctl. :functions: i915_perf_open_ioctl .. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c :functions: i915_perf_release +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_add_config_ioctl +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_remove_config_ioctl i915 Perf Stream ---------------- @@ -477,4 +481,16 @@ specific details than found in the more high-level sections. .. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c :internal: -.. WARNING: DOCPROC directive not supported: !Cdrivers/gpu/drm/i915/i915_irq.c +Style +===== + +The drm/i915 driver codebase has some style rules in addition to (and, in some +cases, deviating from) the kernel coding style. + +Register macro definition style +------------------------------- + +The style guide for ``i915_reg.h``. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_reg.h + :doc: The i915 register macro definition style guide diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 1ae42006deea..22af55d06ab8 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -108,8 +108,8 @@ This would be especially useful for tinydrm: crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in __drm_atomic_helper_crtc_duplicate_state(). -- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm_ - prefix ofc and using drm_fb_. drm_framebuffer.c makes sense since this +- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm\_ + prefix ofc and using drm_fb\_. drm_framebuffer.c makes sense since this is a function useful to implement the fb->dirty function. - Create a new drm_fb_dirty function which does essentially what e.g. diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates index 8c10a916de20..af54db92391b 100644 --- a/Documentation/hwmon/ftsteutates +++ b/Documentation/hwmon/ftsteutates @@ -18,6 +18,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and 8 fans. It also contains an integrated watchdog which is currently implemented in this driver. +To clear a temperature or fan alarm, execute the following command with the +correct path to the alarm file: + echo 0 >XXXX_alarm + Specification of the chip can be found here: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps new file mode 100644 index 000000000000..e05ecd8ecfcf --- /dev/null +++ b/Documentation/hwmon/ibm-cffps @@ -0,0 +1,54 @@ +Kernel driver ibm-cffps +======================= + +Supported chips: + * IBM Common Form Factor power supply + +Author: Eddie James <eajames@us.ibm.com> + +Description +----------- + +This driver supports IBM Common Form Factor (CFF) power supplies. This driver +is a client to the core PMBus driver. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + +Sysfs entries +------------- + +The following attributes are supported: + +curr1_alarm Output current over-current alarm. +curr1_input Measured output current in mA. +curr1_label "iout1" + +fan1_alarm Fan 1 warning. +fan1_fault Fan 1 fault. +fan1_input Fan 1 speed in RPM. +fan2_alarm Fan 2 warning. +fan2_fault Fan 2 fault. +fan2_input Fan 2 speed in RPM. + +in1_alarm Input voltage under-voltage alarm. +in1_input Measured input voltage in mV. +in1_label "vin" +in2_alarm Output voltage over-voltage alarm. +in2_input Measured output voltage in mV. +in2_label "vout1" + +power1_alarm Input fault or alarm. +power1_input Measured input power in uW. +power1_label "pin" + +temp1_alarm PSU inlet ambient temperature over-temperature alarm. +temp1_input Measured PSU inlet ambient temp in millidegrees C. +temp2_alarm Secondary rectifier temp over-temperature alarm. +temp2_input Measured secondary rectifier temp in millidegrees C. +temp3_alarm ORing FET temperature over-temperature alarm. +temp3_input Measured ORing FET temperature in millidegrees C. diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066 index 2cb20ebb234d..3fa6bf820c88 100644 --- a/Documentation/hwmon/lm25066 +++ b/Documentation/hwmon/lm25066 @@ -29,6 +29,11 @@ Supported chips: Addresses scanned: - Datasheet: http://www.national.com/pf/LM/LM5066.html + * Texas Instruments LM5066I + Prefix: 'lm5066i' + Addresses scanned: - + Datasheet: + http://www.ti.com/product/LM5066I Author: Guenter Roeck <linux@roeck-us.net> @@ -37,8 +42,8 @@ Description ----------- This driver supports hardware monitoring for National Semiconductor / TI LM25056, -LM25063, LM25066, LM5064, and LM5066 Power Management, Monitoring, Control, and -Protection ICs. +LM25063, LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring, +Control, and Protection ICs. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. diff --git a/Documentation/iio/ep93xx_adc.txt b/Documentation/iio/ep93xx_adc.txt new file mode 100644 index 000000000000..23053e7817bd --- /dev/null +++ b/Documentation/iio/ep93xx_adc.txt @@ -0,0 +1,29 @@ +Cirrus Logic EP93xx ADC driver. + +1. Overview + +The driver is intended to work on both low-end (EP9301, EP9302) devices with +5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel +touchscreen/ADC module. + +2. Channel numbering + +Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets. +EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is +not defined. So the last three are numbered randomly, let's say. + +Assuming ep93xx_adc is IIO device0, you'd find the following entries under +/sys/bus/iio/devices/iio:device0/: + + +-----------------+---------------+ + | sysfs entry | ball/pin name | + +-----------------+---------------+ + | in_voltage0_raw | YM | + | in_voltage1_raw | SXP | + | in_voltage2_raw | SXM | + | in_voltage3_raw | SYP | + | in_voltage4_raw | SYM | + | in_voltage5_raw | XP | + | in_voltage6_raw | XM | + | in_voltage7_raw | YP | + +-----------------+---------------+ diff --git a/Documentation/infiniband/tag_matching.txt b/Documentation/infiniband/tag_matching.txt new file mode 100644 index 000000000000..d2a3bf819226 --- /dev/null +++ b/Documentation/infiniband/tag_matching.txt @@ -0,0 +1,64 @@ +Tag matching logic + +The MPI standard defines a set of rules, known as tag-matching, for matching +source send operations to destination receives. The following parameters must +match the following source and destination parameters: +* Communicator +* User tag - wild card may be specified by the receiver +* Source rank – wild car may be specified by the receiver +* Destination rank – wild +The ordering rules require that when more than one pair of send and receive +message envelopes may match, the pair that includes the earliest posted-send +and the earliest posted-receive is the pair that must be used to satisfy the +matching operation. However, this doesn’t imply that tags are consumed in +the order they are created, e.g., a later generated tag may be consumed, if +earlier tags can’t be used to satisfy the matching rules. + +When a message is sent from the sender to the receiver, the communication +library may attempt to process the operation either after or before the +corresponding matching receive is posted. If a matching receive is posted, +this is an expected message, otherwise it is called an unexpected message. +Implementations frequently use different matching schemes for these two +different matching instances. + +To keep MPI library memory footprint down, MPI implementations typically use +two different protocols for this purpose: + +1. The Eager protocol- the complete message is sent when the send is +processed by the sender. A completion send is received in the send_cq +notifying that the buffer can be reused. + +2. The Rendezvous Protocol - the sender sends the tag-matching header, +and perhaps a portion of data when first notifying the receiver. When the +corresponding buffer is posted, the responder will use the information from +the header to initiate an RDMA READ operation directly to the matching buffer. +A fin message needs to be received in order for the buffer to be reused. + +Tag matching implementation + +There are two types of matching objects used, the posted receive list and the +unexpected message list. The application posts receive buffers through calls +to the MPI receive routines in the posted receive list and posts send messages +using the MPI send routines. The head of the posted receive list may be +maintained by the hardware, with the software expected to shadow this list. + +When send is initiated and arrives at the receive side, if there is no +pre-posted receive for this arriving message, it is passed to the software and +placed in the unexpected message list. Otherwise the match is processed, +including rendezvous processing, if appropriate, delivering the data to the +specified receive buffer. This allows overlapping receive-side MPI tag +matching with computation. + +When a receive-message is posted, the communication library will first check +the software unexpected message list for a matching receive. If a match is +found, data is delivered to the user buffer, using a software controlled +protocol. The UCX implementation uses either an eager or rendezvous protocol, +depending on data size. If no match is found, the entire pre-posted receive +list is maintained by the hardware, and there is space to add one more +pre-posted receive to this list, this receive is passed to the hardware. +Software is expected to shadow this list, to help with processing MPI cancel +operations. In addition, because hardware and software are not expected to be +tightly synchronized with respect to the tag-matching operation, this shadow +list is used to detect the case that a pre-posted receive is passed to the +hardware, as the matching unexpected message is being passed from the hardware +to the software. diff --git a/Documentation/input/input.rst b/Documentation/input/input.rst index 3b3a22975106..47f86a4bf16c 100644 --- a/Documentation/input/input.rst +++ b/Documentation/input/input.rst @@ -109,7 +109,7 @@ evdev nodes are created with minors starting with 256. keyboard ~~~~~~~~ -``keyboard`` is in-kernel input handler ad is a part of VT code. It +``keyboard`` is in-kernel input handler and is a part of VT code. It consumes keyboard keystrokes and handles user input for VT consoles. mousedev diff --git a/Documentation/input/joydev/index.rst b/Documentation/input/joydev/index.rst index 8d9666c7561c..ebcff43056e2 100644 --- a/Documentation/input/joydev/index.rst +++ b/Documentation/input/joydev/index.rst @@ -12,7 +12,6 @@ Linux Joystick support .. toctree:: :maxdepth: 3 - :numbered: joystick joystick-api diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 7003141a6d4f..329e740adea7 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -297,9 +297,9 @@ more details, with real examples. ccflags-y specifies options for compiling with $(CC). Example: - # drivers/acpi/Makefile - ccflags-y := -Os - ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT + # drivers/acpi/acpica/Makefile + ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA + ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT This variable is necessary because the top Makefile owns the variable $(KBUILD_CFLAGS) and uses it for compilation flags for the diff --git a/Documentation/locking/crossrelease.txt b/Documentation/locking/crossrelease.txt new file mode 100644 index 000000000000..bdf1423d5f99 --- /dev/null +++ b/Documentation/locking/crossrelease.txt @@ -0,0 +1,874 @@ +Crossrelease +============ + +Started by Byungchul Park <byungchul.park@lge.com> + +Contents: + + (*) Background + + - What causes deadlock + - How lockdep works + + (*) Limitation + + - Limit lockdep + - Pros from the limitation + - Cons from the limitation + - Relax the limitation + + (*) Crossrelease + + - Introduce crossrelease + - Introduce commit + + (*) Implementation + + - Data structures + - How crossrelease works + + (*) Optimizations + + - Avoid duplication + - Lockless for hot paths + + (*) APPENDIX A: What lockdep does to work aggresively + + (*) APPENDIX B: How to avoid adding false dependencies + + +========== +Background +========== + +What causes deadlock +-------------------- + +A deadlock occurs when a context is waiting for an event to happen, +which is impossible because another (or the) context who can trigger the +event is also waiting for another (or the) event to happen, which is +also impossible due to the same reason. + +For example: + + A context going to trigger event C is waiting for event A to happen. + A context going to trigger event A is waiting for event B to happen. + A context going to trigger event B is waiting for event C to happen. + +A deadlock occurs when these three wait operations run at the same time, +because event C cannot be triggered if event A does not happen, which in +turn cannot be triggered if event B does not happen, which in turn +cannot be triggered if event C does not happen. After all, no event can +be triggered since any of them never meets its condition to wake up. + +A dependency might exist between two waiters and a deadlock might happen +due to an incorrect releationship between dependencies. Thus, we must +define what a dependency is first. A dependency exists between them if: + + 1. There are two waiters waiting for each event at a given time. + 2. The only way to wake up each waiter is to trigger its event. + 3. Whether one can be woken up depends on whether the other can. + +Each wait in the example creates its dependency like: + + Event C depends on event A. + Event A depends on event B. + Event B depends on event C. + + NOTE: Precisely speaking, a dependency is one between whether a + waiter for an event can be woken up and whether another waiter for + another event can be woken up. However from now on, we will describe + a dependency as if it's one between an event and another event for + simplicity. + +And they form circular dependencies like: + + -> C -> A -> B - + / \ + \ / + ---------------- + + where 'A -> B' means that event A depends on event B. + +Such circular dependencies lead to a deadlock since no waiter can meet +its condition to wake up as described. + +CONCLUSION + +Circular dependencies cause a deadlock. + + +How lockdep works +----------------- + +Lockdep tries to detect a deadlock by checking dependencies created by +lock operations, acquire and release. Waiting for a lock corresponds to +waiting for an event, and releasing a lock corresponds to triggering an +event in the previous section. + +In short, lockdep does: + + 1. Detect a new dependency. + 2. Add the dependency into a global graph. + 3. Check if that makes dependencies circular. + 4. Report a deadlock or its possibility if so. + +For example, consider a graph built by lockdep that looks like: + + A -> B - + \ + -> E + / + C -> D - + + where A, B,..., E are different lock classes. + +Lockdep will add a dependency into the graph on detection of a new +dependency. For example, it will add a dependency 'E -> C' when a new +dependency between lock E and lock C is detected. Then the graph will be: + + A -> B - + \ + -> E - + / \ + -> C -> D - \ + / / + \ / + ------------------ + + where A, B,..., E are different lock classes. + +This graph contains a subgraph which demonstrates circular dependencies: + + -> E - + / \ + -> C -> D - \ + / / + \ / + ------------------ + + where C, D and E are different lock classes. + +This is the condition under which a deadlock might occur. Lockdep +reports it on detection after adding a new dependency. This is the way +how lockdep works. + +CONCLUSION + +Lockdep detects a deadlock or its possibility by checking if circular +dependencies were created after adding each new dependency. + + +========== +Limitation +========== + +Limit lockdep +------------- + +Limiting lockdep to work on only typical locks e.g. spin locks and +mutexes, which are released within the acquire context, the +implementation becomes simple but its capacity for detection becomes +limited. Let's check pros and cons in next section. + + +Pros from the limitation +------------------------ + +Given the limitation, when acquiring a lock, locks in a held_locks +cannot be released if the context cannot acquire it so has to wait to +acquire it, which means all waiters for the locks in the held_locks are +stuck. It's an exact case to create dependencies between each lock in +the held_locks and the lock to acquire. + +For example: + + CONTEXT X + --------- + acquire A + acquire B /* Add a dependency 'A -> B' */ + release B + release A + + where A and B are different lock classes. + +When acquiring lock A, the held_locks of CONTEXT X is empty thus no +dependency is added. But when acquiring lock B, lockdep detects and adds +a new dependency 'A -> B' between lock A in the held_locks and lock B. +They can be simply added whenever acquiring each lock. + +And data required by lockdep exists in a local structure, held_locks +embedded in task_struct. Forcing to access the data within the context, +lockdep can avoid racy problems without explicit locks while handling +the local data. + +Lastly, lockdep only needs to keep locks currently being held, to build +a dependency graph. However, relaxing the limitation, it needs to keep +even locks already released, because a decision whether they created +dependencies might be long-deferred. + +To sum up, we can expect several advantages from the limitation: + + 1. Lockdep can easily identify a dependency when acquiring a lock. + 2. Races are avoidable while accessing local locks in a held_locks. + 3. Lockdep only needs to keep locks currently being held. + +CONCLUSION + +Given the limitation, the implementation becomes simple and efficient. + + +Cons from the limitation +------------------------ + +Given the limitation, lockdep is applicable only to typical locks. For +example, page locks for page access or completions for synchronization +cannot work with lockdep. + +Can we detect deadlocks below, under the limitation? + +Example 1: + + CONTEXT X CONTEXT Y CONTEXT Z + --------- --------- ---------- + mutex_lock A + lock_page B + lock_page B + mutex_lock A /* DEADLOCK */ + unlock_page B held by X + unlock_page B + mutex_unlock A + mutex_unlock A + + where A and B are different lock classes. + +No, we cannot. + +Example 2: + + CONTEXT X CONTEXT Y + --------- --------- + mutex_lock A + mutex_lock A + wait_for_complete B /* DEADLOCK */ + complete B + mutex_unlock A + mutex_unlock A + + where A is a lock class and B is a completion variable. + +No, we cannot. + +CONCLUSION + +Given the limitation, lockdep cannot detect a deadlock or its +possibility caused by page locks or completions. + + +Relax the limitation +-------------------- + +Under the limitation, things to create dependencies are limited to +typical locks. However, synchronization primitives like page locks and +completions, which are allowed to be released in any context, also +create dependencies and can cause a deadlock. So lockdep should track +these locks to do a better job. We have to relax the limitation for +these locks to work with lockdep. + +Detecting dependencies is very important for lockdep to work because +adding a dependency means adding an opportunity to check whether it +causes a deadlock. The more lockdep adds dependencies, the more it +thoroughly works. Thus Lockdep has to do its best to detect and add as +many true dependencies into a graph as possible. + +For example, considering only typical locks, lockdep builds a graph like: + + A -> B - + \ + -> E + / + C -> D - + + where A, B,..., E are different lock classes. + +On the other hand, under the relaxation, additional dependencies might +be created and added. Assuming additional 'FX -> C' and 'E -> GX' are +added thanks to the relaxation, the graph will be: + + A -> B - + \ + -> E -> GX + / + FX -> C -> D - + + where A, B,..., E, FX and GX are different lock classes, and a suffix + 'X' is added on non-typical locks. + +The latter graph gives us more chances to check circular dependencies +than the former. However, it might suffer performance degradation since +relaxing the limitation, with which design and implementation of lockdep +can be efficient, might introduce inefficiency inevitably. So lockdep +should provide two options, strong detection and efficient detection. + +Choosing efficient detection: + + Lockdep works with only locks restricted to be released within the + acquire context. However, lockdep works efficiently. + +Choosing strong detection: + + Lockdep works with all synchronization primitives. However, lockdep + suffers performance degradation. + +CONCLUSION + +Relaxing the limitation, lockdep can add additional dependencies giving +additional opportunities to check circular dependencies. + + +============ +Crossrelease +============ + +Introduce crossrelease +---------------------- + +In order to allow lockdep to handle additional dependencies by what +might be released in any context, namely 'crosslock', we have to be able +to identify those created by crosslocks. The proposed 'crossrelease' +feature provoides a way to do that. + +Crossrelease feature has to do: + + 1. Identify dependencies created by crosslocks. + 2. Add the dependencies into a dependency graph. + +That's all. Once a meaningful dependency is added into graph, then +lockdep would work with the graph as it did. The most important thing +crossrelease feature has to do is to correctly identify and add true +dependencies into the global graph. + +A dependency e.g. 'A -> B' can be identified only in the A's release +context because a decision required to identify the dependency can be +made only in the release context. That is to decide whether A can be +released so that a waiter for A can be woken up. It cannot be made in +other than the A's release context. + +It's no matter for typical locks because each acquire context is same as +its release context, thus lockdep can decide whether a lock can be +released in the acquire context. However for crosslocks, lockdep cannot +make the decision in the acquire context but has to wait until the +release context is identified. + +Therefore, deadlocks by crosslocks cannot be detected just when it +happens, because those cannot be identified until the crosslocks are +released. However, deadlock possibilities can be detected and it's very +worth. See 'APPENDIX A' section to check why. + +CONCLUSION + +Using crossrelease feature, lockdep can work with what might be released +in any context, namely crosslock. + + +Introduce commit +---------------- + +Since crossrelease defers the work adding true dependencies of +crosslocks until they are actually released, crossrelease has to queue +all acquisitions which might create dependencies with the crosslocks. +Then it identifies dependencies using the queued data in batches at a +proper time. We call it 'commit'. + +There are four types of dependencies: + +1. TT type: 'typical lock A -> typical lock B' + + Just when acquiring B, lockdep can see it's in the A's release + context. So the dependency between A and B can be identified + immediately. Commit is unnecessary. + +2. TC type: 'typical lock A -> crosslock BX' + + Just when acquiring BX, lockdep can see it's in the A's release + context. So the dependency between A and BX can be identified + immediately. Commit is unnecessary, too. + +3. CT type: 'crosslock AX -> typical lock B' + + When acquiring B, lockdep cannot identify the dependency because + there's no way to know if it's in the AX's release context. It has + to wait until the decision can be made. Commit is necessary. + +4. CC type: 'crosslock AX -> crosslock BX' + + When acquiring BX, lockdep cannot identify the dependency because + there's no way to know if it's in the AX's release context. It has + to wait until the decision can be made. Commit is necessary. + But, handling CC type is not implemented yet. It's a future work. + +Lockdep can work without commit for typical locks, but commit step is +necessary once crosslocks are involved. Introducing commit, lockdep +performs three steps. What lockdep does in each step is: + +1. Acquisition: For typical locks, lockdep does what it originally did + and queues the lock so that CT type dependencies can be checked using + it at the commit step. For crosslocks, it saves data which will be + used at the commit step and increases a reference count for it. + +2. Commit: No action is reauired for typical locks. For crosslocks, + lockdep adds CT type dependencies using the data saved at the + acquisition step. + +3. Release: No changes are required for typical locks. When a crosslock + is released, it decreases a reference count for it. + +CONCLUSION + +Crossrelease introduces commit step to handle dependencies of crosslocks +in batches at a proper time. + + +============== +Implementation +============== + +Data structures +--------------- + +Crossrelease introduces two main data structures. + +1. hist_lock + + This is an array embedded in task_struct, for keeping lock history so + that dependencies can be added using them at the commit step. Since + it's local data, it can be accessed locklessly in the owner context. + The array is filled at the acquisition step and consumed at the + commit step. And it's managed in circular manner. + +2. cross_lock + + One per lockdep_map exists. This is for keeping data of crosslocks + and used at the commit step. + + +How crossrelease works +---------------------- + +It's the key of how crossrelease works, to defer necessary works to an +appropriate point in time and perform in at once at the commit step. +Let's take a look with examples step by step, starting from how lockdep +works without crossrelease for typical locks. + + acquire A /* Push A onto held_locks */ + acquire B /* Push B onto held_locks and add 'A -> B' */ + acquire C /* Push C onto held_locks and add 'B -> C' */ + release C /* Pop C from held_locks */ + release B /* Pop B from held_locks */ + release A /* Pop A from held_locks */ + + where A, B and C are different lock classes. + + NOTE: This document assumes that readers already understand how + lockdep works without crossrelease thus omits details. But there's + one thing to note. Lockdep pretends to pop a lock from held_locks + when releasing it. But it's subtly different from the original pop + operation because lockdep allows other than the top to be poped. + +In this case, lockdep adds 'the top of held_locks -> the lock to acquire' +dependency every time acquiring a lock. + +After adding 'A -> B', a dependency graph will be: + + A -> B + + where A and B are different lock classes. + +And after adding 'B -> C', the graph will be: + + A -> B -> C + + where A, B and C are different lock classes. + +Let's performs commit step even for typical locks to add dependencies. +Of course, commit step is not necessary for them, however, it would work +well because this is a more general way. + + acquire A + /* + * Queue A into hist_locks + * + * In hist_locks: A + * In graph: Empty + */ + + acquire B + /* + * Queue B into hist_locks + * + * In hist_locks: A, B + * In graph: Empty + */ + + acquire C + /* + * Queue C into hist_locks + * + * In hist_locks: A, B, C + * In graph: Empty + */ + + commit C + /* + * Add 'C -> ?' + * Answer the following to decide '?' + * What has been queued since acquire C: Nothing + * + * In hist_locks: A, B, C + * In graph: Empty + */ + + release C + + commit B + /* + * Add 'B -> ?' + * Answer the following to decide '?' + * What has been queued since acquire B: C + * + * In hist_locks: A, B, C + * In graph: 'B -> C' + */ + + release B + + commit A + /* + * Add 'A -> ?' + * Answer the following to decide '?' + * What has been queued since acquire A: B, C + * + * In hist_locks: A, B, C + * In graph: 'B -> C', 'A -> B', 'A -> C' + */ + + release A + + where A, B and C are different lock classes. + +In this case, dependencies are added at the commit step as described. + +After commits for A, B and C, the graph will be: + + A -> B -> C + + where A, B and C are different lock classes. + + NOTE: A dependency 'A -> C' is optimized out. + +We can see the former graph built without commit step is same as the +latter graph built using commit steps. Of course the former way leads to +earlier finish for building the graph, which means we can detect a +deadlock or its possibility sooner. So the former way would be prefered +when possible. But we cannot avoid using the latter way for crosslocks. + +Let's look at how commit steps work for crosslocks. In this case, the +commit step is performed only on crosslock AX as real. And it assumes +that the AX release context is different from the AX acquire context. + + BX RELEASE CONTEXT BX ACQUIRE CONTEXT + ------------------ ------------------ + acquire A + /* + * Push A onto held_locks + * Queue A into hist_locks + * + * In held_locks: A + * In hist_locks: A + * In graph: Empty + */ + + acquire BX + /* + * Add 'the top of held_locks -> BX' + * + * In held_locks: A + * In hist_locks: A + * In graph: 'A -> BX' + */ + + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + It must be guaranteed that the following operations are seen after + acquiring BX globally. It can be done by things like barrier. + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + acquire C + /* + * Push C onto held_locks + * Queue C into hist_locks + * + * In held_locks: C + * In hist_locks: C + * In graph: 'A -> BX' + */ + + release C + /* + * Pop C from held_locks + * + * In held_locks: Empty + * In hist_locks: C + * In graph: 'A -> BX' + */ + acquire D + /* + * Push D onto held_locks + * Queue D into hist_locks + * Add 'the top of held_locks -> D' + * + * In held_locks: A, D + * In hist_locks: A, D + * In graph: 'A -> BX', 'A -> D' + */ + acquire E + /* + * Push E onto held_locks + * Queue E into hist_locks + * + * In held_locks: E + * In hist_locks: C, E + * In graph: 'A -> BX', 'A -> D' + */ + + release E + /* + * Pop E from held_locks + * + * In held_locks: Empty + * In hist_locks: D, E + * In graph: 'A -> BX', 'A -> D' + */ + release D + /* + * Pop D from held_locks + * + * In held_locks: A + * In hist_locks: A, D + * In graph: 'A -> BX', 'A -> D' + */ + commit BX + /* + * Add 'BX -> ?' + * What has been queued since acquire BX: C, E + * + * In held_locks: Empty + * In hist_locks: D, E + * In graph: 'A -> BX', 'A -> D', + * 'BX -> C', 'BX -> E' + */ + + release BX + /* + * In held_locks: Empty + * In hist_locks: D, E + * In graph: 'A -> BX', 'A -> D', + * 'BX -> C', 'BX -> E' + */ + release A + /* + * Pop A from held_locks + * + * In held_locks: Empty + * In hist_locks: A, D + * In graph: 'A -> BX', 'A -> D', + * 'BX -> C', 'BX -> E' + */ + + where A, BX, C,..., E are different lock classes, and a suffix 'X' is + added on crosslocks. + +Crossrelease considers all acquisitions after acqiuring BX are +candidates which might create dependencies with BX. True dependencies +will be determined when identifying the release context of BX. Meanwhile, +all typical locks are queued so that they can be used at the commit step. +And then two dependencies 'BX -> C' and 'BX -> E' are added at the +commit step when identifying the release context. + +The final graph will be, with crossrelease: + + -> C + / + -> BX - + / \ + A - -> E + \ + -> D + + where A, BX, C,..., E are different lock classes, and a suffix 'X' is + added on crosslocks. + +However, the final graph will be, without crossrelease: + + A -> D + + where A and D are different lock classes. + +The former graph has three more dependencies, 'A -> BX', 'BX -> C' and +'BX -> E' giving additional opportunities to check if they cause +deadlocks. This way lockdep can detect a deadlock or its possibility +caused by crosslocks. + +CONCLUSION + +We checked how crossrelease works with several examples. + + +============= +Optimizations +============= + +Avoid duplication +----------------- + +Crossrelease feature uses a cache like what lockdep already uses for +dependency chains, but this time it's for caching CT type dependencies. +Once that dependency is cached, the same will never be added again. + + +Lockless for hot paths +---------------------- + +To keep all locks for later use at the commit step, crossrelease adopts +a local array embedded in task_struct, which makes access to the data +lockless by forcing it to happen only within the owner context. It's +like how lockdep handles held_locks. Lockless implmentation is important +since typical locks are very frequently acquired and released. + + +================================================= +APPENDIX A: What lockdep does to work aggresively +================================================= + +A deadlock actually occurs when all wait operations creating circular +dependencies run at the same time. Even though they don't, a potential +deadlock exists if the problematic dependencies exist. Thus it's +meaningful to detect not only an actual deadlock but also its potential +possibility. The latter is rather valuable. When a deadlock occurs +actually, we can identify what happens in the system by some means or +other even without lockdep. However, there's no way to detect possiblity +without lockdep unless the whole code is parsed in head. It's terrible. +Lockdep does the both, and crossrelease only focuses on the latter. + +Whether or not a deadlock actually occurs depends on several factors. +For example, what order contexts are switched in is a factor. Assuming +circular dependencies exist, a deadlock would occur when contexts are +switched so that all wait operations creating the dependencies run +simultaneously. Thus to detect a deadlock possibility even in the case +that it has not occured yet, lockdep should consider all possible +combinations of dependencies, trying to: + +1. Use a global dependency graph. + + Lockdep combines all dependencies into one global graph and uses them, + regardless of which context generates them or what order contexts are + switched in. Aggregated dependencies are only considered so they are + prone to be circular if a problem exists. + +2. Check dependencies between classes instead of instances. + + What actually causes a deadlock are instances of lock. However, + lockdep checks dependencies between classes instead of instances. + This way lockdep can detect a deadlock which has not happened but + might happen in future by others but the same class. + +3. Assume all acquisitions lead to waiting. + + Although locks might be acquired without waiting which is essential + to create dependencies, lockdep assumes all acquisitions lead to + waiting since it might be true some time or another. + +CONCLUSION + +Lockdep detects not only an actual deadlock but also its possibility, +and the latter is more valuable. + + +================================================== +APPENDIX B: How to avoid adding false dependencies +================================================== + +Remind what a dependency is. A dependency exists if: + + 1. There are two waiters waiting for each event at a given time. + 2. The only way to wake up each waiter is to trigger its event. + 3. Whether one can be woken up depends on whether the other can. + +For example: + + acquire A + acquire B /* A dependency 'A -> B' exists */ + release B + release A + + where A and B are different lock classes. + +A depedency 'A -> B' exists since: + + 1. A waiter for A and a waiter for B might exist when acquiring B. + 2. Only way to wake up each is to release what it waits for. + 3. Whether the waiter for A can be woken up depends on whether the + other can. IOW, TASK X cannot release A if it fails to acquire B. + +For another example: + + TASK X TASK Y + ------ ------ + acquire AX + acquire B /* A dependency 'AX -> B' exists */ + release B + release AX held by Y + + where AX and B are different lock classes, and a suffix 'X' is added + on crosslocks. + +Even in this case involving crosslocks, the same rule can be applied. A +depedency 'AX -> B' exists since: + + 1. A waiter for AX and a waiter for B might exist when acquiring B. + 2. Only way to wake up each is to release what it waits for. + 3. Whether the waiter for AX can be woken up depends on whether the + other can. IOW, TASK X cannot release AX if it fails to acquire B. + +Let's take a look at more complicated example: + + TASK X TASK Y + ------ ------ + acquire B + release B + fork Y + acquire AX + acquire C /* A dependency 'AX -> C' exists */ + release C + release AX held by Y + + where AX, B and C are different lock classes, and a suffix 'X' is + added on crosslocks. + +Does a dependency 'AX -> B' exist? Nope. + +Two waiters are essential to create a dependency. However, waiters for +AX and B to create 'AX -> B' cannot exist at the same time in this +example. Thus the dependency 'AX -> B' cannot be created. + +It would be ideal if the full set of true ones can be considered. But +we can ensure nothing but what actually happened. Relying on what +actually happens at runtime, we can anyway add only true ones, though +they might be a subset of true ones. It's similar to how lockdep works +for typical locks. There might be more true dependencies than what +lockdep has detected in runtime. Lockdep has no choice but to rely on +what actually happens. Crossrelease also relies on it. + +CONCLUSION + +Relying on what actually happens, lockdep can avoid adding false +dependencies. diff --git a/Documentation/locking/rt-mutex-design.txt b/Documentation/locking/rt-mutex-design.txt index 8666070d3189..6c6e8c2410de 100644 --- a/Documentation/locking/rt-mutex-design.txt +++ b/Documentation/locking/rt-mutex-design.txt @@ -97,9 +97,9 @@ waiter - A waiter is a struct that is stored on the stack of a blocked a process being blocked on the mutex, it is fine to allocate the waiter on the process's stack (local variable). This structure holds a pointer to the task, as well as the mutex that - the task is blocked on. It also has the plist node structures to - place the task in the waiter_list of a mutex as well as the - pi_list of a mutex owner task (described below). + the task is blocked on. It also has rbtree node structures to + place the task in the waiters rbtree of a mutex as well as the + pi_waiters rbtree of a mutex owner task (described below). waiter is sometimes used in reference to the task that is waiting on a mutex. This is the same as waiter->task. @@ -179,53 +179,34 @@ again. | F->L5-+ +If process G has the highest priority in the chain, then all the tasks up +the chain (A and B in this example), must have their priorities increased +to that of G. -Plist ------ - -Before I go further and talk about how the PI chain is stored through lists -on both mutexes and processes, I'll explain the plist. This is similar to -the struct list_head functionality that is already in the kernel. -The implementation of plist is out of scope for this document, but it is -very important to understand what it does. - -There are a few differences between plist and list, the most important one -being that plist is a priority sorted linked list. This means that the -priorities of the plist are sorted, such that it takes O(1) to retrieve the -highest priority item in the list. Obviously this is useful to store processes -based on their priorities. - -Another difference, which is important for implementation, is that, unlike -list, the head of the list is a different element than the nodes of a list. -So the head of the list is declared as struct plist_head and nodes that will -be added to the list are declared as struct plist_node. - - -Mutex Waiter List +Mutex Waiters Tree ----------------- -Every mutex keeps track of all the waiters that are blocked on itself. The mutex -has a plist to store these waiters by priority. This list is protected by -a spin lock that is located in the struct of the mutex. This lock is called -wait_lock. Since the modification of the waiter list is never done in -interrupt context, the wait_lock can be taken without disabling interrupts. +Every mutex keeps track of all the waiters that are blocked on itself. The +mutex has a rbtree to store these waiters by priority. This tree is protected +by a spin lock that is located in the struct of the mutex. This lock is called +wait_lock. -Task PI List +Task PI Tree ------------ -To keep track of the PI chains, each process has its own PI list. This is -a list of all top waiters of the mutexes that are owned by the process. -Note that this list only holds the top waiters and not all waiters that are +To keep track of the PI chains, each process has its own PI rbtree. This is +a tree of all top waiters of the mutexes that are owned by the process. +Note that this tree only holds the top waiters and not all waiters that are blocked on mutexes owned by the process. -The top of the task's PI list is always the highest priority task that +The top of the task's PI tree is always the highest priority task that is waiting on a mutex that is owned by the task. So if the task has inherited a priority, it will always be the priority of the task that is -at the top of this list. +at the top of this tree. -This list is stored in the task structure of a process as a plist called -pi_list. This list is protected by a spin lock also in the task structure, +This tree is stored in the task structure of a process as a rbtree called +pi_waiters. It is protected by a spin lock also in the task structure, called pi_lock. This lock may also be taken in interrupt context, so when locking the pi_lock, interrupts must be disabled. @@ -312,15 +293,12 @@ Mutex owner and flags The mutex structure contains a pointer to the owner of the mutex. If the mutex is not owned, this owner is set to NULL. Since all architectures -have the task structure on at least a four byte alignment (and if this is -not true, the rtmutex.c code will be broken!), this allows for the two -least significant bits to be used as flags. This part is also described -in Documentation/rt-mutex.txt, but will also be briefly described here. - -Bit 0 is used as the "Pending Owner" flag. This is described later. -Bit 1 is used as the "Has Waiters" flags. This is also described later - in more detail, but is set whenever there are waiters on a mutex. +have the task structure on at least a two byte alignment (and if this is +not true, the rtmutex.c code will be broken!), this allows for the least +significant bit to be used as a flag. Bit 0 is used as the "Has Waiters" +flag. It's set whenever there are waiters on a mutex. +See Documentation/locking/rt-mutex.txt for further details. cmpxchg Tricks -------------- @@ -359,40 +337,31 @@ Priority adjustments -------------------- The implementation of the PI code in rtmutex.c has several places that a -process must adjust its priority. With the help of the pi_list of a +process must adjust its priority. With the help of the pi_waiters of a process this is rather easy to know what needs to be adjusted. -The functions implementing the task adjustments are rt_mutex_adjust_prio, -__rt_mutex_adjust_prio (same as the former, but expects the task pi_lock -to already be taken), rt_mutex_getprio, and rt_mutex_setprio. +The functions implementing the task adjustments are rt_mutex_adjust_prio +and rt_mutex_setprio. rt_mutex_setprio is only used in rt_mutex_adjust_prio. -rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio. +rt_mutex_adjust_prio examines the priority of the task, and the highest +priority process that is waiting any of mutexes owned by the task. Since +the pi_waiters of a task holds an order by priority of all the top waiters +of all the mutexes that the task owns, we simply need to compare the top +pi waiter to its own normal/deadline priority and take the higher one. +Then rt_mutex_setprio is called to adjust the priority of the task to the +new priority. Note that rt_mutex_setprio is defined in kernel/sched/core.c +to implement the actual change in priority. -rt_mutex_getprio returns the priority that the task should have. Either the -task's own normal priority, or if a process of a higher priority is waiting on -a mutex owned by the task, then that higher priority should be returned. -Since the pi_list of a task holds an order by priority list of all the top -waiters of all the mutexes that the task owns, rt_mutex_getprio simply needs -to compare the top pi waiter to its own normal priority, and return the higher -priority back. +(Note: For the "prio" field in task_struct, the lower the number, the + higher the priority. A "prio" of 5 is of higher priority than a + "prio" of 10.) -(Note: if looking at the code, you will notice that the lower number of - prio is returned. This is because the prio field in the task structure - is an inverse order of the actual priority. So a "prio" of 5 is - of higher priority than a "prio" of 10.) - -__rt_mutex_adjust_prio examines the result of rt_mutex_getprio, and if the -result does not equal the task's current priority, then rt_mutex_setprio -is called to adjust the priority of the task to the new priority. -Note that rt_mutex_setprio is defined in kernel/sched/core.c to implement the -actual change in priority. - -It is interesting to note that __rt_mutex_adjust_prio can either increase +It is interesting to note that rt_mutex_adjust_prio can either increase or decrease the priority of the task. In the case that a higher priority -process has just blocked on a mutex owned by the task, __rt_mutex_adjust_prio +process has just blocked on a mutex owned by the task, rt_mutex_adjust_prio would increase/boost the task's priority. But if a higher priority task were for some reason to leave the mutex (timeout or signal), this same function -would decrease/unboost the priority of the task. That is because the pi_list +would decrease/unboost the priority of the task. That is because the pi_waiters always contains the highest priority task that is waiting on a mutex owned by the task, so we only need to compare the priority of that top pi waiter to the normal priority of the given task. @@ -412,9 +381,10 @@ priorities. rt_mutex_adjust_prio_chain is called with a task to be checked for PI (de)boosting (the owner of a mutex that a process is blocking on), a flag to -check for deadlocking, the mutex that the task owns, and a pointer to a waiter +check for deadlocking, the mutex that the task owns, a pointer to a waiter that is the process's waiter struct that is blocked on the mutex (although this -parameter may be NULL for deboosting). +parameter may be NULL for deboosting), a pointer to the mutex on which the task +is blocked, and a top_task as the top waiter of the mutex. For this explanation, I will not mention deadlock detection. This explanation will try to stay at a high level. @@ -424,133 +394,14 @@ that the state of the owner and lock can change when entered into this function. Before this function is called, the task has already had rt_mutex_adjust_prio performed on it. This means that the task is set to the priority that it -should be at, but the plist nodes of the task's waiter have not been updated -with the new priorities, and that this task may not be in the proper locations -in the pi_lists and wait_lists that the task is blocked on. This function +should be at, but the rbtree nodes of the task's waiter have not been updated +with the new priorities, and this task may not be in the proper locations +in the pi_waiters and waiters trees that the task is blocked on. This function solves all that. -A loop is entered, where task is the owner to be checked for PI changes that -was passed by parameter (for the first iteration). The pi_lock of this task is -taken to prevent any more changes to the pi_list of the task. This also -prevents new tasks from completing the blocking on a mutex that is owned by this -task. - -If the task is not blocked on a mutex then the loop is exited. We are at -the top of the PI chain. - -A check is now done to see if the original waiter (the process that is blocked -on the current mutex) is the top pi waiter of the task. That is, is this -waiter on the top of the task's pi_list. If it is not, it either means that -there is another process higher in priority that is blocked on one of the -mutexes that the task owns, or that the waiter has just woken up via a signal -or timeout and has left the PI chain. In either case, the loop is exited, since -we don't need to do any more changes to the priority of the current task, or any -task that owns a mutex that this current task is waiting on. A priority chain -walk is only needed when a new top pi waiter is made to a task. - -The next check sees if the task's waiter plist node has the priority equal to -the priority the task is set at. If they are equal, then we are done with -the loop. Remember that the function started with the priority of the -task adjusted, but the plist nodes that hold the task in other processes -pi_lists have not been adjusted. - -Next, we look at the mutex that the task is blocked on. The mutex's wait_lock -is taken. This is done by a spin_trylock, because the locking order of the -pi_lock and wait_lock goes in the opposite direction. If we fail to grab the -lock, the pi_lock is released, and we restart the loop. - -Now that we have both the pi_lock of the task as well as the wait_lock of -the mutex the task is blocked on, we update the task's waiter's plist node -that is located on the mutex's wait_list. - -Now we release the pi_lock of the task. - -Next the owner of the mutex has its pi_lock taken, so we can update the -task's entry in the owner's pi_list. If the task is the highest priority -process on the mutex's wait_list, then we remove the previous top waiter -from the owner's pi_list, and replace it with the task. - -Note: It is possible that the task was the current top waiter on the mutex, - in which case the task is not yet on the pi_list of the waiter. This - is OK, since plist_del does nothing if the plist node is not on any - list. - -If the task was not the top waiter of the mutex, but it was before we -did the priority updates, that means we are deboosting/lowering the -task. In this case, the task is removed from the pi_list of the owner, -and the new top waiter is added. - -Lastly, we unlock both the pi_lock of the task, as well as the mutex's -wait_lock, and continue the loop again. On the next iteration of the -loop, the previous owner of the mutex will be the task that will be -processed. - -Note: One might think that the owner of this mutex might have changed - since we just grab the mutex's wait_lock. And one could be right. - The important thing to remember is that the owner could not have - become the task that is being processed in the PI chain, since - we have taken that task's pi_lock at the beginning of the loop. - So as long as there is an owner of this mutex that is not the same - process as the tasked being worked on, we are OK. - - Looking closely at the code, one might be confused. The check for the - end of the PI chain is when the task isn't blocked on anything or the - task's waiter structure "task" element is NULL. This check is - protected only by the task's pi_lock. But the code to unlock the mutex - sets the task's waiter structure "task" element to NULL with only - the protection of the mutex's wait_lock, which was not taken yet. - Isn't this a race condition if the task becomes the new owner? - - The answer is No! The trick is the spin_trylock of the mutex's - wait_lock. If we fail that lock, we release the pi_lock of the - task and continue the loop, doing the end of PI chain check again. - - In the code to release the lock, the wait_lock of the mutex is held - the entire time, and it is not let go when we grab the pi_lock of the - new owner of the mutex. So if the switch of a new owner were to happen - after the check for end of the PI chain and the grabbing of the - wait_lock, the unlocking code would spin on the new owner's pi_lock - but never give up the wait_lock. So the PI chain loop is guaranteed to - fail the spin_trylock on the wait_lock, release the pi_lock, and - try again. - - If you don't quite understand the above, that's OK. You don't have to, - unless you really want to make a proof out of it ;) - - -Pending Owners and Lock stealing --------------------------------- - -One of the flags in the owner field of the mutex structure is "Pending Owner". -What this means is that an owner was chosen by the process releasing the -mutex, but that owner has yet to wake up and actually take the mutex. - -Why is this important? Why can't we just give the mutex to another process -and be done with it? - -The PI code is to help with real-time processes, and to let the highest -priority process run as long as possible with little latencies and delays. -If a high priority process owns a mutex that a lower priority process is -blocked on, when the mutex is released it would be given to the lower priority -process. What if the higher priority process wants to take that mutex again. -The high priority process would fail to take that mutex that it just gave up -and it would need to boost the lower priority process to run with full -latency of that critical section (since the low priority process just entered -it). - -There's no reason a high priority process that gives up a mutex should be -penalized if it tries to take that mutex again. If the new owner of the -mutex has not woken up yet, there's no reason that the higher priority process -could not take that mutex away. - -To solve this, we introduced Pending Ownership and Lock Stealing. When a -new process is given a mutex that it was blocked on, it is only given -pending ownership. This means that it's the new owner, unless a higher -priority process comes in and tries to grab that mutex. If a higher priority -process does come along and wants that mutex, we let the higher priority -process "steal" the mutex from the pending owner (only if it is still pending) -and continue with the mutex. - +The main operation of this function is summarized by Thomas Gleixner in +rtmutex.c. See the 'Chain walk basics and protection scope' comment for further +details. Taking of a mutex (The walk through) ------------------------------------ @@ -563,14 +414,14 @@ done when we have CMPXCHG enabled (otherwise the fast taking automatically fails). Only when the owner field of the mutex is NULL can the lock be taken with the CMPXCHG and nothing else needs to be done. -If there is contention on the lock, whether it is owned or pending owner -we go about the slow path (rt_mutex_slowlock). +If there is contention on the lock, we go about the slow path +(rt_mutex_slowlock). The slow path function is where the task's waiter structure is created on the stack. This is because the waiter structure is only needed for the scope of this function. The waiter structure holds the nodes to store -the task on the wait_list of the mutex, and if need be, the pi_list of -the owner. +the task on the waiters tree of the mutex, and if need be, the pi_waiters +tree of the owner. The wait_lock of the mutex is taken since the slow path of unlocking the mutex also takes this lock. @@ -581,102 +432,45 @@ contention). try_to_take_rt_mutex is used every time the task tries to grab a mutex in the slow path. The first thing that is done here is an atomic setting of -the "Has Waiters" flag of the mutex's owner field. Yes, this could really -be false, because if the mutex has no owner, there are no waiters and -the current task also won't have any waiters. But we don't have the lock -yet, so we assume we are going to be a waiter. The reason for this is to -play nice for those architectures that do have CMPXCHG. By setting this flag -now, the owner of the mutex can't release the mutex without going into the -slow unlock path, and it would then need to grab the wait_lock, which this -code currently holds. So setting the "Has Waiters" flag forces the owner -to synchronize with this code. - -Now that we know that we can't have any races with the owner releasing the -mutex, we check to see if we can take the ownership. This is done if the -mutex doesn't have a owner, or if we can steal the mutex from a pending -owner. Let's look at the situations we have here. - - 1) Has owner that is pending - ---------------------------- - - The mutex has a owner, but it hasn't woken up and the mutex flag - "Pending Owner" is set. The first check is to see if the owner isn't the - current task. This is because this function is also used for the pending - owner to grab the mutex. When a pending owner wakes up, it checks to see - if it can take the mutex, and this is done if the owner is already set to - itself. If so, we succeed and leave the function, clearing the "Pending - Owner" bit. - - If the pending owner is not current, we check to see if the current priority is - higher than the pending owner. If not, we fail the function and return. - - There's also something special about a pending owner. That is a pending owner - is never blocked on a mutex. So there is no PI chain to worry about. It also - means that if the mutex doesn't have any waiters, there's no accounting needed - to update the pending owner's pi_list, since we only worry about processes - blocked on the current mutex. - - If there are waiters on this mutex, and we just stole the ownership, we need - to take the top waiter, remove it from the pi_list of the pending owner, and - add it to the current pi_list. Note that at this moment, the pending owner - is no longer on the list of waiters. This is fine, since the pending owner - would add itself back when it realizes that it had the ownership stolen - from itself. When the pending owner tries to grab the mutex, it will fail - in try_to_take_rt_mutex if the owner field points to another process. - - 2) No owner - ----------- - - If there is no owner (or we successfully stole the lock), we set the owner - of the mutex to current, and set the flag of "Has Waiters" if the current - mutex actually has waiters, or we clear the flag if it doesn't. See, it was - OK that we set that flag early, since now it is cleared. - - 3) Failed to grab ownership - --------------------------- - - The most interesting case is when we fail to take ownership. This means that - there exists an owner, or there's a pending owner with equal or higher - priority than the current task. - -We'll continue on the failed case. - -If the mutex has a timeout, we set up a timer to go off to break us out -of this mutex if we failed to get it after a specified amount of time. - -Now we enter a loop that will continue to try to take ownership of the mutex, or -fail from a timeout or signal. - -Once again we try to take the mutex. This will usually fail the first time -in the loop, since it had just failed to get the mutex. But the second time -in the loop, this would likely succeed, since the task would likely be -the pending owner. - -If the mutex is TASK_INTERRUPTIBLE a check for signals and timeout is done -here. - -The waiter structure has a "task" field that points to the task that is blocked -on the mutex. This field can be NULL the first time it goes through the loop -or if the task is a pending owner and had its mutex stolen. If the "task" -field is NULL then we need to set up the accounting for it. +the "Has Waiters" flag of the mutex's owner field. By setting this flag +now, the current owner of the mutex being contended for can't release the mutex +without going into the slow unlock path, and it would then need to grab the +wait_lock, which this code currently holds. So setting the "Has Waiters" flag +forces the current owner to synchronize with this code. + +The lock is taken if the following are true: + 1) The lock has no owner + 2) The current task is the highest priority against all other + waiters of the lock + +If the task succeeds to acquire the lock, then the task is set as the +owner of the lock, and if the lock still has waiters, the top_waiter +(highest priority task waiting on the lock) is added to this task's +pi_waiters tree. + +If the lock is not taken by try_to_take_rt_mutex(), then the +task_blocks_on_rt_mutex() function is called. This will add the task to +the lock's waiter tree and propagate the pi chain of the lock as well +as the lock's owner's pi_waiters tree. This is described in the next +section. Task blocks on mutex -------------------- The accounting of a mutex and process is done with the waiter structure of the process. The "task" field is set to the process, and the "lock" field -to the mutex. The plist nodes are initialized to the processes current -priority. +to the mutex. The rbtree node of waiter are initialized to the processes +current priority. Since the wait_lock was taken at the entry of the slow lock, we can safely -add the waiter to the wait_list. If the current process is the highest -priority process currently waiting on this mutex, then we remove the -previous top waiter process (if it exists) from the pi_list of the owner, -and add the current process to that list. Since the pi_list of the owner +add the waiter to the task waiter tree. If the current process is the +highest priority process currently waiting on this mutex, then we remove the +previous top waiter process (if it exists) from the pi_waiters of the owner, +and add the current process to that tree. Since the pi_waiter of the owner has changed, we call rt_mutex_adjust_prio on the owner to see if the owner should adjust its priority accordingly. -If the owner is also blocked on a lock, and had its pi_list changed +If the owner is also blocked on a lock, and had its pi_waiters changed (or deadlock checking is on), we unlock the wait_lock of the mutex and go ahead and run rt_mutex_adjust_prio_chain on the owner, as described earlier. @@ -686,30 +480,23 @@ mutex (waiter "task" field is not NULL), then we go to sleep (call schedule). Waking up in the loop --------------------- -The schedule can then wake up for a few reasons. - 1) we were given pending ownership of the mutex. - 2) we received a signal and was TASK_INTERRUPTIBLE - 3) we had a timeout and was TASK_INTERRUPTIBLE +The task can then wake up for a couple of reasons: + 1) The previous lock owner released the lock, and the task now is top_waiter + 2) we received a signal or timeout -In any of these cases, we continue the loop and once again try to grab the -ownership of the mutex. If we succeed, we exit the loop, otherwise we continue -and on signal and timeout, will exit the loop, or if we had the mutex stolen -we just simply add ourselves back on the lists and go back to sleep. +In both cases, the task will try again to acquire the lock. If it +does, then it will take itself off the waiters tree and set itself back +to the TASK_RUNNING state. -Note: For various reasons, because of timeout and signals, the steal mutex - algorithm needs to be careful. This is because the current process is - still on the wait_list. And because of dynamic changing of priorities, - especially on SCHED_OTHER tasks, the current process can be the - highest priority task on the wait_list. - -Failed to get mutex on Timeout or Signal ----------------------------------------- +In first case, if the lock was acquired by another task before this task +could get the lock, then it will go back to sleep and wait to be woken again. -If a timeout or signal occurred, the waiter's "task" field would not be -NULL and the task needs to be taken off the wait_list of the mutex and perhaps -pi_list of the owner. If this process was a high priority process, then -the rt_mutex_adjust_prio_chain needs to be executed again on the owner, -but this time it will be lowering the priorities. +The second case is only applicable for tasks that are grabbing a mutex +that can wake up before getting the lock, either due to a signal or +a timeout (i.e. rt_mutex_timed_futex_lock()). When woken, it will try to +take the lock again, if it succeeds, then the task will return with the +lock held, otherwise it will return with -EINTR if the task was woken +by a signal, or -ETIMEDOUT if it timed out. Unlocking the Mutex @@ -739,25 +526,12 @@ owner still needs to make this check. If there are no waiters then the mutex owner field is set to NULL, the wait_lock is released and nothing more is needed. -If there are waiters, then we need to wake one up and give that waiter -pending ownership. +If there are waiters, then we need to wake one up. On the wake up code, the pi_lock of the current owner is taken. The top -waiter of the lock is found and removed from the wait_list of the mutex -as well as the pi_list of the current owner. The task field of the new -pending owner's waiter structure is set to NULL, and the owner field of the -mutex is set to the new owner with the "Pending Owner" bit set, as well -as the "Has Waiters" bit if there still are other processes blocked on the -mutex. - -The pi_lock of the previous owner is released, and the new pending owner's -pi_lock is taken. Remember that this is the trick to prevent the race -condition in rt_mutex_adjust_prio_chain from adding itself as a waiter -on the mutex. - -We now clear the "pi_blocked_on" field of the new pending owner, and if -the mutex still has waiters pending, we add the new top waiter to the pi_list -of the pending owner. +waiter of the lock is found and removed from the waiters tree of the mutex +as well as the pi_waiters tree of the current owner. The "Has Waiters" bit is +marked to prevent lower priority tasks from stealing the lock. Finally we unlock the pi_lock of the pending owner and wake it up. @@ -772,10 +546,14 @@ Credits ------- Author: Steven Rostedt <rostedt@goodmis.org> +Updated: Alex Shi <alex.shi@linaro.org> - 7/6/2017 -Reviewers: Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and Randy Dunlap +Original Reviewers: Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and + Randy Dunlap +Update (7/6/2017) Reviewers: Steven Rostedt and Sebastian Siewior Updates ------- This document was originally written for 2.6.17-rc3-mm1 +was updated on 4.12 diff --git a/Documentation/locking/rt-mutex.txt b/Documentation/locking/rt-mutex.txt index 243393d882ee..35793e003041 100644 --- a/Documentation/locking/rt-mutex.txt +++ b/Documentation/locking/rt-mutex.txt @@ -28,14 +28,13 @@ magic bullet for poorly designed applications, but it allows well-designed applications to use userspace locks in critical parts of an high priority thread, without losing determinism. -The enqueueing of the waiters into the rtmutex waiter list is done in +The enqueueing of the waiters into the rtmutex waiter tree is done in priority order. For same priorities FIFO order is chosen. For each rtmutex, only the top priority waiter is enqueued into the owner's -priority waiters list. This list too queues in priority order. Whenever +priority waiters tree. This tree too queues in priority order. Whenever the top priority waiter of a task changes (for example it timed out or -got a signal), the priority of the owner task is readjusted. [The -priority enqueueing is handled by "plists", see include/linux/plist.h -for more details.] +got a signal), the priority of the owner task is readjusted. The +priority enqueueing is handled by "pi_waiters". RT-mutexes are optimized for fastpath operations and have no internal locking overhead when locking an uncontended mutex or unlocking a mutex @@ -46,34 +45,29 @@ is used] The state of the rt-mutex is tracked via the owner field of the rt-mutex structure: -rt_mutex->owner holds the task_struct pointer of the owner. Bit 0 and 1 -are used to keep track of the "owner is pending" and "rtmutex has -waiters" state. +lock->owner holds the task_struct pointer of the owner. Bit 0 is used to +keep track of the "lock has waiters" state. - owner bit1 bit0 - NULL 0 0 mutex is free (fast acquire possible) - NULL 0 1 invalid state - NULL 1 0 Transitional state* - NULL 1 1 invalid state - taskpointer 0 0 mutex is held (fast release possible) - taskpointer 0 1 task is pending owner - taskpointer 1 0 mutex is held and has waiters - taskpointer 1 1 task is pending owner and mutex has waiters + owner bit0 + NULL 0 lock is free (fast acquire possible) + NULL 1 lock is free and has waiters and the top waiter + is going to take the lock* + taskpointer 0 lock is held (fast release possible) + taskpointer 1 lock is held and has waiters** -Pending-ownership handling is a performance optimization: -pending-ownership is assigned to the first (highest priority) waiter of -the mutex, when the mutex is released. The thread is woken up and once -it starts executing it can acquire the mutex. Until the mutex is taken -by it (bit 0 is cleared) a competing higher priority thread can "steal" -the mutex which puts the woken up thread back on the waiters list. +The fast atomic compare exchange based acquire and release is only +possible when bit 0 of lock->owner is 0. -The pending-ownership optimization is especially important for the -uninterrupted workflow of high-prio tasks which repeatedly -takes/releases locks that have lower-prio waiters. Without this -optimization the higher-prio thread would ping-pong to the lower-prio -task [because at unlock time we always assign a new owner]. +(*) It also can be a transitional state when grabbing the lock +with ->wait_lock is held. To prevent any fast path cmpxchg to the lock, +we need to set the bit0 before looking at the lock, and the owner may be +NULL in this small time, hence this can be a transitional state. -(*) The "mutex has waiters" bit gets set to take the lock. If the lock -doesn't already have an owner, this bit is quickly cleared if there are -no waiters. So this is a transitional state to synchronize with looking -at the owner field of the mutex and the mutex owner releasing the lock. +(**) There is a small time when bit 0 is set but there are no +waiters. This can happen when grabbing the lock in the slow path. +To prevent a cmpxchg of the owner releasing the lock, we need to +set this bit before looking at the lock. + +BTW, there is still technically a "Pending Owner", it's just not called +that anymore. The pending owner happens to be the top_waiter of a lock +that has no owner and has been woken up to grab the lock. diff --git a/Documentation/media/ca.h.rst.exceptions b/Documentation/media/ca.h.rst.exceptions index d7c9fed8c004..553559cc6ad7 100644 --- a/Documentation/media/ca.h.rst.exceptions +++ b/Documentation/media/ca.h.rst.exceptions @@ -16,7 +16,6 @@ replace define CA_NDS :c:type:`ca_descr_info` replace define CA_DSS :c:type:`ca_descr_info` # some typedefs should point to struct/enums -replace typedef ca_pid_t :c:type:`ca_pid` replace typedef ca_slot_info_t :c:type:`ca_slot_info` replace typedef ca_descr_info_t :c:type:`ca_descr_info` replace typedef ca_caps_t :c:type:`ca_caps` diff --git a/Documentation/media/cec-drivers/index.rst b/Documentation/media/cec-drivers/index.rst new file mode 100644 index 000000000000..7ef204823422 --- /dev/null +++ b/Documentation/media/cec-drivers/index.rst @@ -0,0 +1,34 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. include:: <isonum.txt> + +.. _cec-drivers: + +################################# +CEC driver-specific documentation +################################# + +**Copyright** |copy| 2017 : LinuxTV Developers + +This documentation is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation version 2 of the License. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +For more details see the file COPYING in the source distribution of Linux. + +.. only:: html + + .. class:: toc-title + + Table of Contents + +.. toctree:: + :maxdepth: 5 + :numbered: + + pulse8-cec diff --git a/Documentation/media/cec-drivers/pulse8-cec.rst b/Documentation/media/cec-drivers/pulse8-cec.rst new file mode 100644 index 000000000000..99551c6a9bc5 --- /dev/null +++ b/Documentation/media/cec-drivers/pulse8-cec.rst @@ -0,0 +1,11 @@ +Pulse-Eight CEC Adapter driver +============================== + +The pulse8-cec driver implements the following module option: + +``persistent_config`` +--------------------- + +By default this is off, but when set to 1 the driver will store the current +settings to the device's internal eeprom and restore it the next time the +device is connected to the USB port. diff --git a/Documentation/media/dmx.h.rst.exceptions b/Documentation/media/dmx.h.rst.exceptions index 2fdb458564ba..629db384104a 100644 --- a/Documentation/media/dmx.h.rst.exceptions +++ b/Documentation/media/dmx.h.rst.exceptions @@ -40,27 +40,17 @@ replace enum dmx_input :c:type:`dmx_input` replace symbol DMX_IN_FRONTEND :c:type:`dmx_input` replace symbol DMX_IN_DVR :c:type:`dmx_input` -# dmx_source_t symbols -replace enum dmx_source :c:type:`dmx_source` -replace symbol DMX_SOURCE_FRONT0 :c:type:`dmx_source` -replace symbol DMX_SOURCE_FRONT1 :c:type:`dmx_source` -replace symbol DMX_SOURCE_FRONT2 :c:type:`dmx_source` -replace symbol DMX_SOURCE_FRONT3 :c:type:`dmx_source` -replace symbol DMX_SOURCE_DVR0 :c:type:`dmx_source` -replace symbol DMX_SOURCE_DVR1 :c:type:`dmx_source` -replace symbol DMX_SOURCE_DVR2 :c:type:`dmx_source` -replace symbol DMX_SOURCE_DVR3 :c:type:`dmx_source` - - # Flags for struct dmx_sct_filter_params replace define DMX_CHECK_CRC :c:type:`dmx_sct_filter_params` replace define DMX_ONESHOT :c:type:`dmx_sct_filter_params` replace define DMX_IMMEDIATE_START :c:type:`dmx_sct_filter_params` -replace define DMX_KERNEL_CLIENT :c:type:`dmx_sct_filter_params` # some typedefs should point to struct/enums -replace typedef dmx_caps_t :c:type:`dmx_caps` replace typedef dmx_filter_t :c:type:`dmx_filter` replace typedef dmx_pes_type_t :c:type:`dmx_pes_type` replace typedef dmx_input_t :c:type:`dmx_input` -replace typedef dmx_source_t :c:type:`dmx_source` + +ignore symbol DMX_OUT_DECODER +ignore symbol DMX_OUT_TAP +ignore symbol DMX_OUT_TS_TAP +ignore symbol DMX_OUT_TSDEMUX_TAP diff --git a/Documentation/media/dvb-drivers/ci.rst b/Documentation/media/dvb-drivers/ci.rst index 69b07e9d1816..87f3748c49b9 100644 --- a/Documentation/media/dvb-drivers/ci.rst +++ b/Documentation/media/dvb-drivers/ci.rst @@ -143,7 +143,6 @@ All these ioctls are also valid for the High level CI interface #define CA_GET_MSG _IOR('o', 132, ca_msg_t) #define CA_SEND_MSG _IOW('o', 133, ca_msg_t) #define CA_SET_DESCR _IOW('o', 134, ca_descr_t) -#define CA_SET_PID _IOW('o', 135, ca_pid_t) On querying the device, the device yields information thus: diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst index ea0da6d63299..376141143ae9 100644 --- a/Documentation/media/dvb-drivers/index.rst +++ b/Documentation/media/dvb-drivers/index.rst @@ -19,7 +19,9 @@ more details. For more details see the file COPYING in the source distribution of Linux. -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents diff --git a/Documentation/media/frontend.h.rst.exceptions b/Documentation/media/frontend.h.rst.exceptions index 7656770f1936..f7c4df620a52 100644 --- a/Documentation/media/frontend.h.rst.exceptions +++ b/Documentation/media/frontend.h.rst.exceptions @@ -25,19 +25,9 @@ ignore define DTV_MAX_COMMAND ignore define MAX_DTV_STATS ignore define DTV_IOCTL_MAX_MSGS -# Stats enum is documented altogether -replace enum fecap_scale_params :ref:`frontend-stat-properties` -replace symbol FE_SCALE_COUNTER frontend-stat-properties -replace symbol FE_SCALE_DECIBEL frontend-stat-properties -replace symbol FE_SCALE_NOT_AVAILABLE frontend-stat-properties -replace symbol FE_SCALE_RELATIVE frontend-stat-properties - # the same reference is used for both get and set ioctls replace ioctl FE_SET_PROPERTY :c:type:`FE_GET_PROPERTY` -# Ignore struct used only internally at Kernel -ignore struct dtv_cmds_h - # Typedefs that use the enum reference replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage` @@ -45,3 +35,178 @@ replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage` replace define FE_TUNE_MODE_ONESHOT :c:func:`FE_SET_FRONTEND_TUNE_MODE` replace define LNA_AUTO dtv-lna replace define NO_STREAM_ID_FILTER dtv-stream-id + +# Those enums are defined at the frontend.h header, and not externally + +ignore symbol FE_IS_STUPID +ignore symbol FE_CAN_INVERSION_AUTO +ignore symbol FE_CAN_FEC_1_2 +ignore symbol FE_CAN_FEC_2_3 +ignore symbol FE_CAN_FEC_3_4 +ignore symbol FE_CAN_FEC_4_5 +ignore symbol FE_CAN_FEC_5_6 +ignore symbol FE_CAN_FEC_6_7 +ignore symbol FE_CAN_FEC_7_8 +ignore symbol FE_CAN_FEC_8_9 +ignore symbol FE_CAN_FEC_AUTO +ignore symbol FE_CAN_QPSK +ignore symbol FE_CAN_QAM_16 +ignore symbol FE_CAN_QAM_32 +ignore symbol FE_CAN_QAM_64 +ignore symbol FE_CAN_QAM_128 +ignore symbol FE_CAN_QAM_256 +ignore symbol FE_CAN_QAM_AUTO +ignore symbol FE_CAN_TRANSMISSION_MODE_AUTO +ignore symbol FE_CAN_BANDWIDTH_AUTO +ignore symbol FE_CAN_GUARD_INTERVAL_AUTO +ignore symbol FE_CAN_HIERARCHY_AUTO +ignore symbol FE_CAN_8VSB +ignore symbol FE_CAN_16VSB +ignore symbol FE_HAS_EXTENDED_CAPS +ignore symbol FE_CAN_MULTISTREAM +ignore symbol FE_CAN_TURBO_FEC +ignore symbol FE_CAN_2G_MODULATION +ignore symbol FE_NEEDS_BENDING +ignore symbol FE_CAN_RECOVER +ignore symbol FE_CAN_MUTE_TS + +ignore symbol QPSK +ignore symbol QAM_16 +ignore symbol QAM_32 +ignore symbol QAM_64 +ignore symbol QAM_128 +ignore symbol QAM_256 +ignore symbol QAM_AUTO +ignore symbol VSB_8 +ignore symbol VSB_16 +ignore symbol PSK_8 +ignore symbol APSK_16 +ignore symbol APSK_32 +ignore symbol DQPSK +ignore symbol QAM_4_NR + +ignore symbol SEC_VOLTAGE_13 +ignore symbol SEC_VOLTAGE_18 +ignore symbol SEC_VOLTAGE_OFF + +ignore symbol SEC_TONE_ON +ignore symbol SEC_TONE_OFF + +ignore symbol SEC_MINI_A +ignore symbol SEC_MINI_B + +ignore symbol FE_NONE +ignore symbol FE_HAS_SIGNAL +ignore symbol FE_HAS_CARRIER +ignore symbol FE_HAS_VITERBI +ignore symbol FE_HAS_SYNC +ignore symbol FE_HAS_LOCK +ignore symbol FE_REINIT +ignore symbol FE_TIMEDOUT + +ignore symbol FEC_NONE +ignore symbol FEC_1_2 +ignore symbol FEC_2_3 +ignore symbol FEC_3_4 +ignore symbol FEC_4_5 +ignore symbol FEC_5_6 +ignore symbol FEC_6_7 +ignore symbol FEC_7_8 +ignore symbol FEC_8_9 +ignore symbol FEC_AUTO +ignore symbol FEC_3_5 +ignore symbol FEC_9_10 +ignore symbol FEC_2_5 + +ignore symbol TRANSMISSION_MODE_AUTO +ignore symbol TRANSMISSION_MODE_1K +ignore symbol TRANSMISSION_MODE_2K +ignore symbol TRANSMISSION_MODE_8K +ignore symbol TRANSMISSION_MODE_4K +ignore symbol TRANSMISSION_MODE_16K +ignore symbol TRANSMISSION_MODE_32K +ignore symbol TRANSMISSION_MODE_C1 +ignore symbol TRANSMISSION_MODE_C3780 +ignore symbol TRANSMISSION_MODE_2K +ignore symbol TRANSMISSION_MODE_8K + +ignore symbol GUARD_INTERVAL_AUTO +ignore symbol GUARD_INTERVAL_1_128 +ignore symbol GUARD_INTERVAL_1_32 +ignore symbol GUARD_INTERVAL_1_16 +ignore symbol GUARD_INTERVAL_1_8 +ignore symbol GUARD_INTERVAL_1_4 +ignore symbol GUARD_INTERVAL_19_128 +ignore symbol GUARD_INTERVAL_19_256 +ignore symbol GUARD_INTERVAL_PN420 +ignore symbol GUARD_INTERVAL_PN595 +ignore symbol GUARD_INTERVAL_PN945 + +ignore symbol HIERARCHY_NONE +ignore symbol HIERARCHY_AUTO +ignore symbol HIERARCHY_1 +ignore symbol HIERARCHY_2 +ignore symbol HIERARCHY_4 + +ignore symbol INTERLEAVING_NONE +ignore symbol INTERLEAVING_AUTO +ignore symbol INTERLEAVING_240 +ignore symbol INTERLEAVING_720 + +ignore symbol PILOT_ON +ignore symbol PILOT_OFF +ignore symbol PILOT_AUTO + +ignore symbol ROLLOFF_35 +ignore symbol ROLLOFF_20 +ignore symbol ROLLOFF_25 +ignore symbol ROLLOFF_AUTO + +ignore symbol INVERSION_ON +ignore symbol INVERSION_OFF +ignore symbol INVERSION_AUTO + +ignore symbol SYS_UNDEFINED +ignore symbol SYS_DVBC_ANNEX_A +ignore symbol SYS_DVBC_ANNEX_B +ignore symbol SYS_DVBC_ANNEX_C +ignore symbol SYS_ISDBC +ignore symbol SYS_DVBT +ignore symbol SYS_DVBT2 +ignore symbol SYS_ISDBT +ignore symbol SYS_ATSC +ignore symbol SYS_ATSCMH +ignore symbol SYS_DTMB +ignore symbol SYS_DVBS +ignore symbol SYS_DVBS2 +ignore symbol SYS_TURBO +ignore symbol SYS_ISDBS +ignore symbol SYS_DAB +ignore symbol SYS_DSS +ignore symbol SYS_CMMB +ignore symbol SYS_DVBH + +ignore symbol ATSCMH_SCCC_BLK_SEP +ignore symbol ATSCMH_SCCC_BLK_COMB +ignore symbol ATSCMH_SCCC_BLK_RES + +ignore symbol ATSCMH_SCCC_CODE_HLF +ignore symbol ATSCMH_SCCC_CODE_QTR +ignore symbol ATSCMH_SCCC_CODE_RES + +ignore symbol ATSCMH_RSFRAME_ENS_PRI +ignore symbol ATSCMH_RSFRAME_ENS_SEC + +ignore symbol ATSCMH_RSFRAME_PRI_ONLY +ignore symbol ATSCMH_RSFRAME_PRI_SEC +ignore symbol ATSCMH_RSFRAME_RES + +ignore symbol ATSCMH_RSCODE_211_187 +ignore symbol ATSCMH_RSCODE_223_187 +ignore symbol ATSCMH_RSCODE_235_187 +ignore symbol ATSCMH_RSCODE_RES + +ignore symbol FE_SCALE_NOT_AVAILABLE +ignore symbol FE_SCALE_DECIBEL +ignore symbol FE_SCALE_RELATIVE +ignore symbol FE_SCALE_COUNTER diff --git a/Documentation/media/index.rst b/Documentation/media/index.rst index 7f8f0af620ce..1cf5316c8ff8 100644 --- a/Documentation/media/index.rst +++ b/Documentation/media/index.rst @@ -1,7 +1,11 @@ Linux Media Subsystem Documentation =================================== -Contents: +.. only:: html + + .. class:: toc-title + + Table of Contents .. toctree:: :maxdepth: 2 @@ -10,6 +14,7 @@ Contents: media_kapi dvb-drivers/index v4l-drivers/index + cec-drivers/index .. only:: subproject diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index 8a65c69ed071..28866259998c 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -107,6 +107,7 @@ your driver: int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); + void (*adap_free)(struct cec_adapter *adap); /* High-level callbacks */ ... @@ -184,6 +185,14 @@ To log the current CEC hardware status: This optional callback can be used to show the status of the CEC hardware. The status is available through debugfs: cat /sys/kernel/debug/cec/cecX/status +To free any resources when the adapter is deleted: + +.. c:function:: + void (*adap_free)(struct cec_adapter *adap); + +This optional callback can be used to free any resources that might have been +allocated by the driver. It's called from cec_delete_adapter. + Your adapter driver will also have to react to events (typically interrupt driven) by calling into the framework in the following situations: @@ -336,3 +345,34 @@ log_addrs->num_log_addrs set to 0. The block argument is ignored when unconfiguring. This function will just return if the physical address is invalid. Once the physical address becomes valid, then the framework will attempt to claim these logical addresses. + +CEC Pin framework +----------------- + +Most CEC hardware operates on full CEC messages where the software provides +the message and the hardware handles the low-level CEC protocol. But some +hardware only drives the CEC pin and software has to handle the low-level +CEC protocol. The CEC pin framework was created to handle such devices. + +Note that due to the close-to-realtime requirements it can never be guaranteed +to work 100%. This framework uses highres timers internally, but if a +timer goes off too late by more than 300 microseconds wrong results can +occur. In reality it appears to be fairly reliable. + +One advantage of this low-level implementation is that it can be used as +a cheap CEC analyser, especially if interrupts can be used to detect +CEC pin transitions from low to high or vice versa. + +.. kernel-doc:: include/media/cec-pin.h + +CEC Notifier framework +---------------------- + +Most drm HDMI implementations have an integrated CEC implementation and no +notifier support is needed. But some have independent CEC implementations +that have their own driver. This could be an IP block for an SoC or a +completely separate chip that deals with the CEC pin. For those cases a +drm driver can install a notifier and use the notifier to inform the +CEC driver about changes in the physical address. + +.. kernel-doc:: include/media/cec-notifier.h diff --git a/Documentation/media/kapi/csi2.rst b/Documentation/media/kapi/csi2.rst index e33fcb967922..0560100efca2 100644 --- a/Documentation/media/kapi/csi2.rst +++ b/Documentation/media/kapi/csi2.rst @@ -51,6 +51,16 @@ not active. Some transmitters do this automatically but some have to be explicitly programmed to do so, and some are unable to do so altogether due to hardware constraints. +Stopping the transmitter +^^^^^^^^^^^^^^^^^^^^^^^^ + +A transmitter stops sending the stream of images as a result of +calling the ``.s_stream()`` callback. Some transmitters may stop the +stream at a frame boundary whereas others stop immediately, +effectively leaving the current frame unfinished. The receiver driver +should not make assumptions either way, but function properly in both +cases. + Receiver drivers ---------------- diff --git a/Documentation/media/kapi/v4l2-event.rst b/Documentation/media/kapi/v4l2-event.rst index 9a5e31546ae3..9938d21ef4d1 100644 --- a/Documentation/media/kapi/v4l2-event.rst +++ b/Documentation/media/kapi/v4l2-event.rst @@ -67,6 +67,8 @@ type). The ops argument allows the driver to specify a number of callbacks: +.. tabularcolumns:: |p{1.5cm}|p{16.0cm}| + ======== ============================================================== Callback Description ======== ============================================================== diff --git a/Documentation/media/media_kapi.rst b/Documentation/media/media_kapi.rst index bc0638956a43..83da736fad72 100644 --- a/Documentation/media/media_kapi.rst +++ b/Documentation/media/media_kapi.rst @@ -20,7 +20,9 @@ more details. For more details see the file COPYING in the source distribution of Linux. -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents diff --git a/Documentation/media/media_uapi.rst b/Documentation/media/media_uapi.rst index fd8ebe002cd2..28eb35a1f965 100644 --- a/Documentation/media/media_uapi.rst +++ b/Documentation/media/media_uapi.rst @@ -14,7 +14,9 @@ any later version published by the Free Software Foundation. A copy of the license is included in the chapter entitled "GNU Free Documentation License". -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents diff --git a/Documentation/media/uapi/cec/cec-api.rst b/Documentation/media/uapi/cec/cec-api.rst index bb018709970c..b68ca9c1d2e0 100644 --- a/Documentation/media/uapi/cec/cec-api.rst +++ b/Documentation/media/uapi/cec/cec-api.rst @@ -10,7 +10,10 @@ Part V - Consumer Electronics Control API This part describes the CEC: Consumer Electronics Control -.. class:: toc-title + +.. only:: html + + .. class:: toc-title Table of Contents diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst index 895d9c2d1c04..334358dfa72e 100644 --- a/Documentation/media/uapi/cec/cec-func-close.rst +++ b/Documentation/media/uapi/cec/cec-func-close.rst @@ -40,7 +40,7 @@ freed. The device configuration remain unchanged. Return Value ============ -:c:func:`close()` returns 0 on success. On error, -1 is returned, and +:c:func:`close() <cec-close>` returns 0 on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes are: ``EBADF`` diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst index 22fb6304a2df..e2b6260b0086 100644 --- a/Documentation/media/uapi/cec/cec-func-ioctl.rst +++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst @@ -39,7 +39,7 @@ Arguments Description =========== -The :c:func:`ioctl()` function manipulates cec device parameters. The +The :c:func:`ioctl() <cec-ioctl>` function manipulates cec device parameters. The argument ``fd`` must be an open file descriptor. The ioctl ``request`` code specifies the cec function to be called. It diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst index 18dfb62f2efe..5d6663a649bd 100644 --- a/Documentation/media/uapi/cec/cec-func-open.rst +++ b/Documentation/media/uapi/cec/cec-func-open.rst @@ -46,7 +46,7 @@ Arguments Description =========== -To open a cec device applications call :c:func:`open()` with the +To open a cec device applications call :c:func:`open() <cec-open>` with the desired device name. The function has no side effects; the device configuration remain unchanged. @@ -58,7 +58,7 @@ EBADF. Return Value ============ -:c:func:`open()` returns the new file descriptor on success. On error, +:c:func:`open() <cec-open>` returns the new file descriptor on success. On error, -1 is returned, and ``errno`` is set appropriately. Possible error codes include: diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst index fa0abd8fb160..d49f1ee0742d 100644 --- a/Documentation/media/uapi/cec/cec-func-poll.rst +++ b/Documentation/media/uapi/cec/cec-func-poll.rst @@ -39,10 +39,10 @@ Arguments Description =========== -With the :c:func:`poll()` function applications can wait for CEC +With the :c:func:`poll() <cec-poll>` function applications can wait for CEC events. -On success :c:func:`poll()` returns the number of file descriptors +On success :c:func:`poll() <cec-poll>` returns the number of file descriptors that have been selected (that is, file descriptors for which the ``revents`` field of the respective struct :c:type:`pollfd` is non-zero). CEC devices set the ``POLLIN`` and ``POLLRDNORM`` flags in @@ -53,13 +53,13 @@ then the ``POLLPRI`` flag is set. When the function times out it returns a value of zero, on failure it returns -1 and the ``errno`` variable is set appropriately. -For more details see the :c:func:`poll()` manual page. +For more details see the :c:func:`poll() <cec-poll>` manual page. Return Value ============ -On success, :c:func:`poll()` returns the number structures which have +On success, :c:func:`poll() <cec-poll>` returns the number structures which have non-zero ``revents`` fields, or zero if the call timed out. On error -1 is returned, and the ``errno`` variable is set appropriately: diff --git a/Documentation/media/uapi/cec/cec-funcs.rst b/Documentation/media/uapi/cec/cec-funcs.rst index 5b7630f2e076..6d696cead5cb 100644 --- a/Documentation/media/uapi/cec/cec-funcs.rst +++ b/Documentation/media/uapi/cec/cec-funcs.rst @@ -7,7 +7,6 @@ Function Reference .. toctree:: :maxdepth: 1 - :numbered: cec-func-open cec-func-close diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index 6d7bf7bef3eb..6c1f6efb822e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -21,7 +21,7 @@ Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <cec-func-open>`. + File descriptor returned by :c:func:`open() <cec-open>`. ``argp`` @@ -121,6 +121,13 @@ returns the information to the application. The ioctl never fails. high. This makes it impossible to use CEC to wake up displays that set the HPD pin low when in standby mode, but keep the CEC bus alive. + * .. _`CEC-CAP-MONITOR-PIN`: + + - ``CEC_CAP_MONITOR_PIN`` + - 0x00000080 + - The CEC hardware can monitor CEC pin changes from low to high voltage + and vice versa. When in pin monitoring mode the application will + receive ``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index fcf863ab6f43..84f431a022ad 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -48,7 +48,9 @@ can only be called by a file descriptor in initiator mode (see :ref:`CEC_S_MODE` the ``EBUSY`` error code will be returned. To clear existing logical addresses set ``num_log_addrs`` to 0. All other fields -will be ignored in that case. The adapter will go to the unconfigured state. +will be ignored in that case. The adapter will go to the unconfigured state and the +``cec_version``, ``vendor_id`` and ``osd_name`` fields are all reset to their default +values (CEC version 2.0, no vendor ID and an empty OSD name). If the physical address is valid (see :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`), then this ioctl will block until all requested logical @@ -63,7 +65,7 @@ logical address types are already defined will return with error ``EBUSY``. .. c:type:: cec_log_addrs -.. tabularcolumns:: |p{1.0cm}|p{7.5cm}|p{8.0cm}| +.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}| .. cssclass:: longtable @@ -146,6 +148,9 @@ logical address types are already defined will return with error ``EBUSY``. give the CEC framework more information about the device type, even though the framework won't use it directly in the CEC message. + +.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| + .. _cec-log-addrs-flags: .. flat-table:: Flags for struct cec_log_addrs @@ -173,7 +178,7 @@ logical address types are already defined will return with error ``EBUSY``. to avoid trivial snooping of the keystrokes. * .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`: - - `CEC_LOG_ADDRS_FL_CDC_ONLY` + - ``CEC_LOG_ADDRS_FL_CDC_ONLY`` - 4 - If this flag is set, then the device is CDC-Only. CDC-Only CEC devices are CEC devices that can only handle CDC messages. @@ -181,7 +186,7 @@ logical address types are already defined will return with error ``EBUSY``. All other messages are ignored. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| .. _cec-versions: diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index 4d3570c2e0b3..a5c821809cc6 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -22,7 +22,7 @@ Arguments ========= ``fd`` - File descriptor returned by :ref:`open() <cec-func-open>`. + File descriptor returned by :c:func:`open() <cec-open>`. ``argp`` @@ -87,7 +87,7 @@ it is guaranteed that the state did change in between the two events. this is more than enough. -.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{2.5cm}|p{8.8cm}| +.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}| .. c:type:: cec_event @@ -98,10 +98,11 @@ it is guaranteed that the state did change in between the two events. * - __u64 - ``ts`` - - :cspan:`1` Timestamp of the event in ns. + - :cspan:`1`\ Timestamp of the event in ns. - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. + + To access the same clock from userspace use :c:func:`clock_gettime`. * - __u32 - ``event`` - :cspan:`1` The CEC event type, see :ref:`cec-events`. @@ -146,6 +147,20 @@ it is guaranteed that the state did change in between the two events. - 2 - Generated if one or more CEC messages were lost because the application didn't dequeue CEC messages fast enough. + * .. _`CEC-EVENT-PIN-CEC-LOW`: + + - ``CEC_EVENT_PIN_CEC_LOW`` + - 3 + - Generated if the CEC pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. + * .. _`CEC-EVENT-PIN-CEC-HIGH`: + + - ``CEC_EVENT_PIN_CEC_HIGH`` + - 4 + - Generated if the CEC pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| @@ -165,6 +180,12 @@ it is guaranteed that the state did change in between the two events. opened. See the table above for which events do this. This allows applications to learn the initial state of the CEC adapter at open() time. + * .. _`CEC-EVENT-FL-DROPPED-EVENTS`: + + - ``CEC_EVENT_FL_DROPPED_EVENTS`` + - 2 + - Set if one or more events of the given event type have been dropped. + This is an indication that the application cannot keep up. diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 664f0d47bbcd..508e2e325683 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -108,6 +108,8 @@ Available follower modes are: .. _cec-mode-follower_e: +.. cssclass:: longtable + .. flat-table:: Follower Modes :header-rows: 0 :stub-columns: 0 @@ -149,13 +151,28 @@ Available follower modes are: code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified, the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-MONITOR-PIN`: + + - ``CEC_MODE_MONITOR_PIN`` + - 0xd0 + - Put the file descriptor into pin monitoring mode. Can only be used in + combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, + otherwise the ``EINVAL`` error code will be returned. + This mode requires that the :ref:`CEC_CAP_MONITOR_PIN <CEC-CAP-MONITOR-PIN>` + capability is set, otherwise the ``EINVAL`` error code is returned. + While in pin monitoring mode this file descriptor can receive the + ``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events to see the + low-level CEC pin transitions. This is very useful for debugging. + This mode is only allowed if the process has the ``CAP_NET_ADMIN`` + capability. If that is not set, then the ``EPERM`` error code is returned. * .. _`CEC-MODE-MONITOR`: - ``CEC_MODE_MONITOR`` - 0xe0 - Put the file descriptor into monitor mode. Can only be used in - combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise EINVAL error - code will be returned. In monitor mode all messages this CEC + combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,i + otherwise the ``EINVAL`` error code will be returned. + In monitor mode all messages this CEC device transmits and all messages it receives (both broadcast messages and directed messages for one its logical addresses) will be reported. This is very useful for debugging. This is only @@ -191,55 +208,68 @@ Core message processing details: * .. _`CEC-MSG-GET-CEC-VERSION`: - ``CEC_MSG_GET_CEC_VERSION`` - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return the CEC version that was - set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. + - The core will return the CEC version that was set with + :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`, + except when in passthrough mode. In passthrough mode the core + does nothing and this message has to be handled by a follower + instead. * .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`: - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID`` - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return the vendor ID that was - set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. + - The core will return the vendor ID that was set with + :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`, + except when in passthrough mode. In passthrough mode the core + does nothing and this message has to be handled by a follower + instead. * .. _`CEC-MSG-ABORT`: - ``CEC_MSG_ABORT`` - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return a feature refused - message as per the specification. + - The core will return a Feature Abort message with reason + 'Feature Refused' as per the specification, except when in + passthrough mode. In passthrough mode the core does nothing + and this message has to be handled by a follower instead. * .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`: - ``CEC_MSG_GIVE_PHYSICAL_ADDR`` - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current physical - address. + - The core will report the current physical address, except when + in passthrough mode. In passthrough mode the core does nothing + and this message has to be handled by a follower instead. * .. _`CEC-MSG-GIVE-OSD-NAME`: - ``CEC_MSG_GIVE_OSD_NAME`` - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current OSD name as - was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. + - The core will report the current OSD name that was set with + :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`, + except when in passthrough mode. In passthrough mode the core + does nothing and this message has to be handled by a follower + instead. * .. _`CEC-MSG-GIVE-FEATURES`: - ``CEC_MSG_GIVE_FEATURES`` - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current features as - was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` - or the message is ignored if the CEC version was older than 2.0. + - The core will do nothing if the CEC version is older than 2.0, + otherwise it will report the current features that were set with + :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`, + except when in passthrough mode. In passthrough mode the core + does nothing (for any CEC version) and this message has to be handled + by a follower instead. * .. _`CEC-MSG-USER-CONTROL-PRESSED`: - ``CEC_MSG_USER_CONTROL_PRESSED`` - - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key - press. This message is always passed on to userspace. + - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set and if + :ref:`CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU <CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU>` + is set, then generate a remote control key + press. This message is always passed on to the follower(s). * .. _`CEC-MSG-USER-CONTROL-RELEASED`: - ``CEC_MSG_USER_CONTROL_RELEASED`` - - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key - release. This message is always passed on to userspace. + - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set and if + :ref:`CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU <CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU>` + is set, then generate a remote control key + release. This message is always passed on to the follower(s). * .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`: - ``CEC_MSG_REPORT_PHYSICAL_ADDR`` - The CEC framework will make note of the reported physical address - and then just pass the message on to userspace. + and then just pass the message on to the follower(s). diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index 267044f7ac30..0f397c535a4c 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -195,6 +195,8 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set. +.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.3cm}| + .. _cec-msg-flags: .. flat-table:: Flags for struct cec_msg diff --git a/Documentation/media/uapi/dvb/audio-channel-select.rst b/Documentation/media/uapi/dvb/audio-channel-select.rst index 2ceb4efebdf0..8cab3d7abff5 100644 --- a/Documentation/media/uapi/dvb/audio-channel-select.rst +++ b/Documentation/media/uapi/dvb/audio-channel-select.rst @@ -44,7 +44,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To control a V4L2 decoder use the +This ioctl is for Digital TV devices only. To control a V4L2 decoder use the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead. This ioctl call asks the Audio Device to select the requested channel if diff --git a/Documentation/media/uapi/dvb/audio-fclose.rst b/Documentation/media/uapi/dvb/audio-fclose.rst index 4df24c8d74ed..58d351a3af4b 100644 --- a/Documentation/media/uapi/dvb/audio-fclose.rst +++ b/Documentation/media/uapi/dvb/audio-fclose.rst @@ -2,14 +2,14 @@ .. _audio_fclose: -================= -DVB audio close() -================= +======================== +Digital TV audio close() +======================== Name ---- -DVB audio close() +Digital TV audio close() .. attention:: This ioctl is deprecated diff --git a/Documentation/media/uapi/dvb/audio-fopen.rst b/Documentation/media/uapi/dvb/audio-fopen.rst index a802c2e0dc6a..4a174640bf11 100644 --- a/Documentation/media/uapi/dvb/audio-fopen.rst +++ b/Documentation/media/uapi/dvb/audio-fopen.rst @@ -2,14 +2,14 @@ .. _audio_fopen: -================ -DVB audio open() -================ +======================= +Digital TV audio open() +======================= Name ---- -DVB audio open() +Digital TV audio open() .. attention:: This ioctl is deprecated diff --git a/Documentation/media/uapi/dvb/audio-fwrite.rst b/Documentation/media/uapi/dvb/audio-fwrite.rst index 8882cad7d165..4980ae7953ef 100644 --- a/Documentation/media/uapi/dvb/audio-fwrite.rst +++ b/Documentation/media/uapi/dvb/audio-fwrite.rst @@ -2,14 +2,14 @@ .. _audio_fwrite: -================= -DVB audio write() -================= +========================= +Digital TV audio write() +========================= Name ---- -DVB audio write() +Digital TV audio write() .. attention:: This ioctl is deprecated diff --git a/Documentation/media/uapi/dvb/audio-set-av-sync.rst b/Documentation/media/uapi/dvb/audio-set-av-sync.rst index 0cef4917d2cf..cf621f3a3037 100644 --- a/Documentation/media/uapi/dvb/audio-set-av-sync.rst +++ b/Documentation/media/uapi/dvb/audio-set-av-sync.rst @@ -38,7 +38,7 @@ Arguments - boolean state - - Tells the DVB subsystem if A/V synchronization shall be ON or OFF. + - Tells the Digital TV subsystem if A/V synchronization shall be ON or OFF. TRUE: AV-sync ON diff --git a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst index b063c496c2eb..f0db1fbdb066 100644 --- a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst +++ b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst @@ -38,7 +38,7 @@ Arguments - boolean mode - Enables or disables the decoding of the current Audio stream in - the DVB subsystem. + the Digital TV subsystem. TRUE: Bypass is disabled @@ -50,8 +50,8 @@ Description This ioctl call asks the Audio Device to bypass the Audio decoder and forward the stream without decoding. This mode shall be used if streams -that can’t be handled by the DVB system shall be decoded. Dolby -DigitalTM streams are automatically forwarded by the DVB subsystem if +that can’t be handled by the Digial TV system shall be decoded. Dolby +DigitalTM streams are automatically forwarded by the Digital TV subsystem if the hardware can handle it. diff --git a/Documentation/media/uapi/dvb/audio-set-mute.rst b/Documentation/media/uapi/dvb/audio-set-mute.rst index 897e7228f4d8..0af105a8ddcc 100644 --- a/Documentation/media/uapi/dvb/audio-set-mute.rst +++ b/Documentation/media/uapi/dvb/audio-set-mute.rst @@ -48,7 +48,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To control a V4L2 decoder use the +This ioctl is for Digital TV devices only. To control a V4L2 decoder use the V4L2 :ref:`VIDIOC_DECODER_CMD` with the ``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead. diff --git a/Documentation/media/uapi/dvb/audio.rst b/Documentation/media/uapi/dvb/audio.rst index 155622185ea4..e9f9e589c486 100644 --- a/Documentation/media/uapi/dvb/audio.rst +++ b/Documentation/media/uapi/dvb/audio.rst @@ -2,15 +2,16 @@ .. _dvb_audio: -################ -DVB Audio Device -################ -The DVB audio device controls the MPEG2 audio decoder of the DVB -hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data +####################### +Digital TV Audio Device +####################### + +The Digital TV audio device controls the MPEG2 audio decoder of the Digital +TV hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data types and and ioctl definitions can be accessed by including ``linux/dvb/audio.h`` in your application. -Please note that some DVB cards don’t have their own MPEG decoder, which +Please note that some Digital TV cards don’t have their own MPEG decoder, which results in the omission of the audio and video device. These ioctls were also used by V4L2 to control MPEG decoders implemented diff --git a/Documentation/media/uapi/dvb/audio_h.rst b/Documentation/media/uapi/dvb/audio_h.rst deleted file mode 100644 index e00c3010fdf9..000000000000 --- a/Documentation/media/uapi/dvb/audio_h.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _audio_h: - -********************* -DVB Audio Header File -********************* - -.. kernel-include:: $BUILDDIR/audio.h.rst diff --git a/Documentation/media/uapi/dvb/ca-fclose.rst b/Documentation/media/uapi/dvb/ca-fclose.rst index 5ecefa4abc3d..e84bbfcfa184 100644 --- a/Documentation/media/uapi/dvb/ca-fclose.rst +++ b/Documentation/media/uapi/dvb/ca-fclose.rst @@ -2,14 +2,14 @@ .. _ca_fclose: -============== -DVB CA close() -============== +===================== +Digital TV CA close() +===================== Name ---- -DVB CA close() +Digital TV CA close() Synopsis @@ -34,13 +34,10 @@ This system call closes a previously opened CA device. Return Value ------------ -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 +On success 0 is returned. +On error -1 is returned, and the ``errno`` variable is set +appropriately. - - .. row 1 - - - ``EBADF`` - - - fd is not a valid open file descriptor. +Generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-fopen.rst b/Documentation/media/uapi/dvb/ca-fopen.rst index 3d2819751446..056c71b53a70 100644 --- a/Documentation/media/uapi/dvb/ca-fopen.rst +++ b/Documentation/media/uapi/dvb/ca-fopen.rst @@ -2,14 +2,14 @@ .. _ca_fopen: -============= -DVB CA open() -============= +==================== +Digital TV CA open() +==================== Name ---- -DVB CA open() +Digital TV CA open() Synopsis @@ -23,25 +23,25 @@ Arguments --------- ``name`` - Name of specific DVB CA device. + Name of specific Digital TV CA device. ``flags`` A bit-wise OR of the following flags: +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - - - - O_RDONLY + - - ``O_RDONLY`` - read-only access - - - - O_RDWR + - - ``O_RDWR`` - read/write access - - - - O_NONBLOCK + - - ``O_NONBLOCK`` - open in non-blocking mode (blocking mode is the default) @@ -49,50 +49,29 @@ Arguments Description ----------- -This system call opens a named ca device (e.g. /dev/ost/ca) for -subsequent use. +This system call opens a named ca device (e.g. ``/dev/dvb/adapter?/ca?``) +for subsequent use. -When an open() call has succeeded, the device will be ready for use. The +When an ``open()`` call has succeeded, the device will be ready for use. The significance of blocking or non-blocking mode is described in the documentation for functions where there is a difference. It does not -affect the semantics of the open() call itself. A device opened in +affect the semantics of the ``open()`` call itself. A device opened in blocking mode can later be put into non-blocking mode (and vice versa) -using the F_SETFL command of the fcntl system call. This is a standard -system call, documented in the Linux manual page for fcntl. Only one -user can open the CA Device in O_RDWR mode. All other attempts to open -the device in this mode will fail, and an error code will be returned. +using the ``F_SETFL`` command of the ``fcntl`` system call. This is a +standard system call, documented in the Linux manual page for fcntl. +Only one user can open the CA Device in ``O_RDWR`` mode. All other +attempts to open the device in this mode will fail, and an error code +will be returned. Return Value ------------ -.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``ENODEV`` - - - Device driver not loaded/available. - - - .. row 2 - - - ``EINTERNAL`` - - - Internal error. - - - .. row 3 - - - ``EBUSY`` - - - Device or resource busy. - - .. row 4 +On success 0 is returned. - - ``EINVAL`` +On error -1 is returned, and the ``errno`` variable is set +appropriately. - - Invalid argument. +Generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-cap.rst b/Documentation/media/uapi/dvb/ca-get-cap.rst index fbf7e359cb8a..d2d5c1355396 100644 --- a/Documentation/media/uapi/dvb/ca-get-cap.rst +++ b/Documentation/media/uapi/dvb/ca-get-cap.rst @@ -28,43 +28,19 @@ Arguments ``caps`` Pointer to struct :c:type:`ca_caps`. -.. c:type:: struct ca_caps - -.. flat-table:: struct ca_caps - :header-rows: 1 - :stub-columns: 0 - - - - - type - - name - - description - - - - unsigned int - - slot_num - - total number of CA card and module slots - - - - unsigned int - - slot_type - - bitmask with all supported slot types - - - - unsigned int - - descr_num - - total number of descrambler slots (keys) - - - - unsigned int - - descr_type - - bit mask with all supported descr types - - Description ----------- -.. note:: This ioctl is undocumented. Documentation is welcome. - +Queries the Kernel for information about the available CA and descrambler +slots, and their types. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned and :c:type:`ca_caps` is filled. + +On error, -1 is returned and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-descr-info.rst b/Documentation/media/uapi/dvb/ca-get-descr-info.rst index 7bf327a3d0e3..e564fbb8d524 100644 --- a/Documentation/media/uapi/dvb/ca-get-descr-info.rst +++ b/Documentation/media/uapi/dvb/ca-get-descr-info.rst @@ -27,37 +27,16 @@ Arguments ``desc`` Pointer to struct :c:type:`ca_descr_info`. -.. c:type:: struct ca_descr_info - -.. flat-table:: struct ca_descr_info - :header-rows: 1 - :stub-columns: 0 - - - - - type - - name - - description - - - - - unsigned int - - num - - number of available descramblers (keys) - - - - unsigned int - - type - - type of supported scrambling system. Valid values are: - ``CA_ECD``, ``CA_NDS`` and ``CA_DSS``. - - Description ----------- -.. note:: This ioctl is undocumented. Documentation is welcome. - +Returns information about all descrambler slots. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set +On success 0 is returned, and :c:type:`ca_descr_info` is filled. + +On error -1 is returned, and the ``errno`` variable is set appropriately. The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-msg.rst b/Documentation/media/uapi/dvb/ca-get-msg.rst index 121588da3ef1..ceeda623ce93 100644 --- a/Documentation/media/uapi/dvb/ca-get-msg.rst +++ b/Documentation/media/uapi/dvb/ca-get-msg.rst @@ -28,47 +28,25 @@ Arguments ``msg`` Pointer to struct :c:type:`ca_msg`. +Description +----------- -.. c:type:: struct ca_msg - -.. flat-table:: struct ca_msg - :header-rows: 1 - :stub-columns: 0 - - - - - type - - name - - description - - - - unsigned int - - index - - - - - - - unsigned int - - type - - +Receives a message via a CI CA module. - - - - unsigned int - - length - - +.. note:: - - - - unsigned char - - msg[256] - - + Please notice that, on most drivers, this is done by reading from + the /dev/adapter?/ca? device node. -Description ------------ +Return Value +------------ -.. note:: This ioctl is undocumented. Documentation is welcome. +On success 0 is returned. -Return Value ------------- +On error -1 is returned, and the ``errno`` variable is set +appropriately. -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-slot-info.rst b/Documentation/media/uapi/dvb/ca-get-slot-info.rst index 54e5dc78a2dc..1a1d6f0c71b9 100644 --- a/Documentation/media/uapi/dvb/ca-get-slot-info.rst +++ b/Documentation/media/uapi/dvb/ca-get-slot-info.rst @@ -26,100 +26,32 @@ Arguments File descriptor returned by a previous call to :c:func:`open() <cec-open>`. ``info`` - Pointer to struct c:type:`ca_slot_info`. + Pointer to struct :c:type:`ca_slot_info`. -.. _ca_slot_info_type: +Description +----------- -.. flat-table:: ca_slot_info types - :header-rows: 1 - :stub-columns: 0 +Returns information about a CA slot identified by +:c:type:`ca_slot_info`.slot_num. - - - - type - - name - - description - - - - CA_CI - - 1 - - CI high level interface - - - - - CA_CI_LINK - - 2 - - CI link layer level interface - - - - - CA_CI_PHYS - - 4 - - CI physical layer level interface - - - - - CA_DESCR - - 8 - - built-in descrambler - - - - - CA_SC - - 128 - - simple smart card interface - -.. _ca_slot_info_flag: - -.. flat-table:: ca_slot_info flags - :header-rows: 1 - :stub-columns: 0 - - - - type - - name - - description +Return Value +------------ - - - - CA_CI_MODULE_PRESENT - - 1 - - module (or card) inserted +On success 0 is returned, and :c:type:`ca_slot_info` is filled. - - - - CA_CI_MODULE_READY - - 2 - - +On error -1 is returned, and the ``errno`` variable is set +appropriately. -.. c:type:: ca_slot_info +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| -.. flat-table:: struct ca_slot_info - :header-rows: 1 +.. flat-table:: + :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - - - - type - - name - - description - - - - - int - - num - - slot number - - - - - int - - type - - CA interface this slot supports, as defined at :ref:`ca_slot_info_type`. - - - - - unsigned int - - flags - - flags as defined at :ref:`ca_slot_info_flag`. - - -Description ------------ - -.. note:: This ioctl is undocumented. Documentation is welcome. - - -Return Value ------------- + - - ``ENODEV`` + - the slot is not available. -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-reset.rst b/Documentation/media/uapi/dvb/ca-reset.rst index 477313121a65..29788325f90e 100644 --- a/Documentation/media/uapi/dvb/ca-reset.rst +++ b/Documentation/media/uapi/dvb/ca-reset.rst @@ -28,12 +28,17 @@ Arguments Description ----------- -.. note:: This ioctl is undocumented. Documentation is welcome. +Puts the Conditional Access hardware on its initial state. It should +be called before start using the CA hardware. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-send-msg.rst b/Documentation/media/uapi/dvb/ca-send-msg.rst index 532ef5f9d6ac..9e91287b7bbc 100644 --- a/Documentation/media/uapi/dvb/ca-send-msg.rst +++ b/Documentation/media/uapi/dvb/ca-send-msg.rst @@ -32,12 +32,20 @@ Arguments Description ----------- -.. note:: This ioctl is undocumented. Documentation is welcome. +Sends a message via a CI CA module. +.. note:: + + Please notice that, on most drivers, this is done by writing + to the /dev/adapter?/ca? device node. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-set-descr.rst b/Documentation/media/uapi/dvb/ca-set-descr.rst index 70f7b3cf12ad..a6c47205ffd8 100644 --- a/Documentation/media/uapi/dvb/ca-set-descr.rst +++ b/Documentation/media/uapi/dvb/ca-set-descr.rst @@ -28,16 +28,19 @@ Arguments ``msg`` Pointer to struct :c:type:`ca_descr`. - Description ----------- -.. note:: This ioctl is undocumented. Documentation is welcome. - +CA_SET_DESCR is used for feeding descrambler CA slots with descrambling +keys (refered as control words). Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-set-pid.rst b/Documentation/media/uapi/dvb/ca-set-pid.rst deleted file mode 100644 index 891c1c72ef24..000000000000 --- a/Documentation/media/uapi/dvb/ca-set-pid.rst +++ /dev/null @@ -1,60 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _CA_SET_PID: - -========== -CA_SET_PID -========== - -Name ----- - -CA_SET_PID - - -Synopsis --------- - -.. c:function:: int ioctl(fd, CA_SET_PID, struct ca_pid *pid) - :name: CA_SET_PID - - -Arguments ---------- - -``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. - -``pid`` - Pointer to struct :c:type:`ca_pid`. - -.. c:type:: ca_pid - -.. flat-table:: struct ca_pid - :header-rows: 1 - :stub-columns: 0 - - - - - unsigned int - - pid - - Program ID - - - - - int - - index - - PID index. Use -1 to disable. - - - -Description ------------ - -.. note:: This ioctl is undocumented. Documentation is welcome. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca.rst b/Documentation/media/uapi/dvb/ca.rst index 14b14abda1ae..deac72d89e93 100644 --- a/Documentation/media/uapi/dvb/ca.rst +++ b/Documentation/media/uapi/dvb/ca.rst @@ -2,14 +2,20 @@ .. _dvb_ca: -############# -DVB CA Device -############# -The DVB CA device controls the conditional access hardware. It can be -accessed through ``/dev/dvb/adapter?/ca?``. Data types and and ioctl +#################### +Digital TV CA Device +#################### + +The Digital TV CA device controls the conditional access hardware. It +can be accessed through ``/dev/dvb/adapter?/ca?``. Data types and and ioctl definitions can be accessed by including ``linux/dvb/ca.h`` in your application. +.. note:: + + There are three ioctls at this API that aren't documented: + :ref:`CA_GET_MSG`, :ref:`CA_SEND_MSG` and :ref:`CA_SET_DESCR`. + Documentation for them are welcome. .. toctree:: :maxdepth: 1 diff --git a/Documentation/media/uapi/dvb/ca_data_types.rst b/Documentation/media/uapi/dvb/ca_data_types.rst index d9e27c77426c..ac7cbd76ddd5 100644 --- a/Documentation/media/uapi/dvb/ca_data_types.rst +++ b/Documentation/media/uapi/dvb/ca_data_types.rst @@ -6,105 +6,4 @@ CA Data Types ************* - -.. c:type:: ca_slot_info - -ca_slot_info_t -============== - - -.. code-block:: c - - typedef struct ca_slot_info { - int num; /* slot number */ - - int type; /* CA interface this slot supports */ - #define CA_CI 1 /* CI high level interface */ - #define CA_CI_LINK 2 /* CI link layer level interface */ - #define CA_CI_PHYS 4 /* CI physical layer level interface */ - #define CA_DESCR 8 /* built-in descrambler */ - #define CA_SC 128 /* simple smart card interface */ - - unsigned int flags; - #define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ - #define CA_CI_MODULE_READY 2 - } ca_slot_info_t; - - -.. c:type:: ca_descr_info - -ca_descr_info_t -=============== - - -.. code-block:: c - - typedef struct ca_descr_info { - unsigned int num; /* number of available descramblers (keys) */ - unsigned int type; /* type of supported scrambling system */ - #define CA_ECD 1 - #define CA_NDS 2 - #define CA_DSS 4 - } ca_descr_info_t; - - -.. c:type:: ca_caps - -ca_caps_t -========= - - -.. code-block:: c - - typedef struct ca_caps { - unsigned int slot_num; /* total number of CA card and module slots */ - unsigned int slot_type; /* OR of all supported types */ - unsigned int descr_num; /* total number of descrambler slots (keys) */ - unsigned int descr_type;/* OR of all supported types */ - } ca_cap_t; - - -.. c:type:: ca_msg - -ca_msg_t -======== - - -.. code-block:: c - - /* a message to/from a CI-CAM */ - typedef struct ca_msg { - unsigned int index; - unsigned int type; - unsigned int length; - unsigned char msg[256]; - } ca_msg_t; - - -.. c:type:: ca_descr - -ca_descr_t -========== - - -.. code-block:: c - - typedef struct ca_descr { - unsigned int index; - unsigned int parity; - unsigned char cw[8]; - } ca_descr_t; - - -.. c:type:: ca_pid - -ca-pid -====== - - -.. code-block:: c - - typedef struct ca_pid { - unsigned int pid; - int index; /* -1 == disable*/ - } ca_pid_t; +.. kernel-doc:: include/uapi/linux/dvb/ca.h diff --git a/Documentation/media/uapi/dvb/ca_function_calls.rst b/Documentation/media/uapi/dvb/ca_function_calls.rst index c085a0ebbc05..87d697851e82 100644 --- a/Documentation/media/uapi/dvb/ca_function_calls.rst +++ b/Documentation/media/uapi/dvb/ca_function_calls.rst @@ -18,4 +18,3 @@ CA Function Calls ca-get-msg ca-send-msg ca-set-descr - ca-set-pid diff --git a/Documentation/media/uapi/dvb/ca_h.rst b/Documentation/media/uapi/dvb/ca_h.rst deleted file mode 100644 index f513592ef529..000000000000 --- a/Documentation/media/uapi/dvb/ca_h.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _ca_h: - -********************************** -DVB Conditional Access Header File -********************************** - -.. kernel-include:: $BUILDDIR/ca.h.rst diff --git a/Documentation/media/uapi/dvb/demux.rst b/Documentation/media/uapi/dvb/demux.rst index b12b5a2dac94..45c3d6405c46 100644 --- a/Documentation/media/uapi/dvb/demux.rst +++ b/Documentation/media/uapi/dvb/demux.rst @@ -2,10 +2,15 @@ .. _dvb_demux: -################ -DVB Demux Device -################ -The DVB demux device controls the filters of the DVB hardware/software. +####################### +Digital TV Demux Device +####################### + +The Digital TV demux device controls the MPEG-TS filters for the +digital TV. If the driver and hardware supports, those filters are +implemented at the hardware. Otherwise, the Kernel provides a software +emulation. + It can be accessed through ``/dev/adapter?/demux?``. Data types and and ioctl definitions can be accessed by including ``linux/dvb/dmx.h`` in your application. diff --git a/Documentation/media/uapi/dvb/dmx-add-pid.rst b/Documentation/media/uapi/dvb/dmx-add-pid.rst index 689cd1fc9142..4d5632dfb43e 100644 --- a/Documentation/media/uapi/dvb/dmx-add-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-add-pid.rst @@ -33,13 +33,17 @@ Description ----------- This ioctl call allows to add multiple PIDs to a transport stream filter -previously set up with DMX_SET_PES_FILTER and output equal to -DMX_OUT_TSDEMUX_TAP. +previously set up with :ref:`DMX_SET_PES_FILTER` and output equal to +:c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-fclose.rst b/Documentation/media/uapi/dvb/dmx-fclose.rst index ca93c23cde6d..578e929f4bde 100644 --- a/Documentation/media/uapi/dvb/dmx-fclose.rst +++ b/Documentation/media/uapi/dvb/dmx-fclose.rst @@ -2,14 +2,14 @@ .. _dmx_fclose: -================= -DVB demux close() -================= +======================== +Digital TV demux close() +======================== Name ---- -DVB demux close() +Digital TV demux close() Synopsis @@ -23,25 +23,23 @@ Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() <dvb-ca-open>`. + File descriptor returned by a previous call to + :c:func:`open() <dvb-dmx-open>`. Description ----------- This system call deactivates and deallocates a filter that was -previously allocated via the open() call. +previously allocated via the :c:func:`open() <dvb-dmx-open>` call. Return Value ------------ -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 +On success 0 is returned. +On error, -1 is returned and the ``errno`` variable is set +appropriately. - - .. row 1 - - - ``EBADF`` - - - fd is not a valid open file descriptor. +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-fopen.rst b/Documentation/media/uapi/dvb/dmx-fopen.rst index a697e33c32ea..55628a18ba67 100644 --- a/Documentation/media/uapi/dvb/dmx-fopen.rst +++ b/Documentation/media/uapi/dvb/dmx-fopen.rst @@ -2,14 +2,14 @@ .. _dmx_fopen: -================ -DVB demux open() -================ +======================= +Digital TV demux open() +======================= Name ---- -DVB demux open() +Digital TV demux open() Synopsis @@ -22,25 +22,28 @@ Arguments --------- ``name`` - Name of specific DVB demux device. + Name of specific Digital TV demux device. ``flags`` A bit-wise OR of the following flags: +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - - - O_RDONLY + - ``O_RDONLY`` - read-only access - - - O_RDWR + - ``O_RDWR`` - read/write access - - - O_NONBLOCK + - ``O_NONBLOCK`` - open in non-blocking mode (blocking mode is the default) @@ -48,52 +51,41 @@ Arguments Description ----------- -This system call, used with a device name of /dev/dvb/adapter0/demux0, +This system call, used with a device name of ``/dev/dvb/adapter?/demux?``, allocates a new filter and returns a handle which can be used for subsequent control of that filter. This call has to be made for each filter to be used, i.e. every returned file descriptor is a reference to -a single filter. /dev/dvb/adapter0/dvr0 is a logical device to be used +a single filter. ``/dev/dvb/adapter?/dvr?`` is a logical device to be used for retrieving Transport Streams for digital video recording. When reading from this device a transport stream containing the packets from all PES filters set in the corresponding demux device -(/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A -recorded Transport Stream is replayed by writing to this device. +(``/dev/dvb/adapter?/demux?``) having the output set to ``DMX_OUT_TS_TAP``. +A recorded Transport Stream is replayed by writing to this device. The significance of blocking or non-blocking mode is described in the documentation for functions where there is a difference. It does not -affect the semantics of the open() call itself. A device opened in -blocking mode can later be put into non-blocking mode (and vice versa) -using the F_SETFL command of the fcntl system call. +affect the semantics of the ``open()`` call itself. A device opened +in blocking mode can later be put into non-blocking mode (and vice versa) +using the ``F_SETFL`` command of the fcntl system call. Return Value ------------ -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``ENODEV`` - - - Device driver not loaded/available. +On success 0 is returned. - - .. row 2 +On error -1 is returned, and the ``errno`` variable is set +appropriately. - - ``EINVAL`` +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| - - Invalid argument. - - - .. row 3 - - - ``EMFILE`` +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 16 + - - ``EMFILE`` - “Too many open files”, i.e. no more filters available. - - .. row 4 - - - ``ENOMEM`` - - - The driver failed to allocate enough memory. +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-fread.rst b/Documentation/media/uapi/dvb/dmx-fread.rst index e8c7f4db353f..488bdc4ba178 100644 --- a/Documentation/media/uapi/dvb/dmx-fread.rst +++ b/Documentation/media/uapi/dvb/dmx-fread.rst @@ -2,14 +2,14 @@ .. _dmx_fread: -================ -DVB demux read() -================ +======================= +Digital TV demux read() +======================= Name ---- -DVB demux read() +Digital TV demux read() Synopsis @@ -33,62 +33,48 @@ Arguments Description ----------- -This system call returns filtered data, which might be section or PES -data. The filtered data is transferred from the driver’s internal -circular buffer to buf. The maximum amount of data to be transferred is -implied by count. +This system call returns filtered data, which might be section or Packetized +Elementary Stream (PES) data. The filtered data is transferred from +the driver’s internal circular buffer to ``buf``. The maximum amount of data +to be transferred is implied by count. + +.. note:: + + if a section filter created with + :c:type:`DMX_CHECK_CRC <dmx_sct_filter_params>` flag set, + data that fails on CRC check will be silently ignored. + Return Value ------------ +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + .. tabularcolumns:: |p{2.5cm}|p{15.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 + - - ``EWOULDBLOCK`` + - No data to return and ``O_NONBLOCK`` was specified. - - .. row 1 - - - ``EWOULDBLOCK`` - - - No data to return and O_NONBLOCK was specified. - - - .. row 2 - - - ``EBADF`` - - - fd is not a valid open file descriptor. - - - .. row 3 - - - ``ECRC`` - - - Last section had a CRC error - no data returned. The buffer is - flushed. - - - .. row 4 - - - ``EOVERFLOW`` - - - - - - .. row 5 - - - + - - ``EOVERFLOW`` - The filtered data was not read from the buffer in due time, resulting in non-read data being lost. The buffer is flushed. - - .. row 6 - - - ``ETIMEDOUT`` - - - The section was not loaded within the stated timeout period. See - ioctl DMX_SET_FILTER for how to set a timeout. + - - ``ETIMEDOUT`` + - The section was not loaded within the stated timeout period. + See ioctl :ref:`DMX_SET_FILTER` for how to set a timeout. - - .. row 7 + - - ``EFAULT`` + - The driver failed to write to the callers buffer due to an + invalid \*buf pointer. - - ``EFAULT`` - - The driver failed to write to the callers buffer due to an invalid - \*buf pointer. +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-fwrite.rst b/Documentation/media/uapi/dvb/dmx-fwrite.rst index 8a90dfe28307..519e5733e53b 100644 --- a/Documentation/media/uapi/dvb/dmx-fwrite.rst +++ b/Documentation/media/uapi/dvb/dmx-fwrite.rst @@ -2,14 +2,14 @@ .. _dmx_fwrite: -================= -DVB demux write() -================= +======================== +Digital TV demux write() +======================== Name ---- -DVB demux write() +Digital TV demux write() Synopsis @@ -34,42 +34,39 @@ Description ----------- This system call is only provided by the logical device -/dev/dvb/adapter0/dvr0, associated with the physical demux device that +``/dev/dvb/adapter?/dvr?``, associated with the physical demux device that provides the actual DVR functionality. It is used for replay of a digitally recorded Transport Stream. Matching filters have to be defined -in the corresponding physical demux device, /dev/dvb/adapter0/demux0. +in the corresponding physical demux device, ``/dev/dvb/adapter?/demux?``. The amount of data to be transferred is implied by count. Return Value ------------ +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + .. tabularcolumns:: |p{2.5cm}|p{15.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - - .. row 1 - - - ``EWOULDBLOCK`` - - - No data was written. This might happen if O_NONBLOCK was + - - ``EWOULDBLOCK`` + - No data was written. This might happen if ``O_NONBLOCK`` was specified and there is no more buffer space available (if - O_NONBLOCK is not specified the function will block until buffer + ``O_NONBLOCK`` is not specified the function will block until buffer space is available). - - .. row 2 - - - ``EBUSY`` - + - - ``EBUSY`` - This error code indicates that there are conflicting requests. The corresponding demux device is setup to receive data from the front- end. Make sure that these filters are stopped and that the - filters with input set to DMX_IN_DVR are started. - - - .. row 3 - - - ``EBADF`` + filters with input set to ``DMX_IN_DVR`` are started. - - fd is not a valid open file descriptor. +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-get-caps.rst b/Documentation/media/uapi/dvb/dmx-get-caps.rst deleted file mode 100644 index 145fb520d779..000000000000 --- a/Documentation/media/uapi/dvb/dmx-get-caps.rst +++ /dev/null @@ -1,41 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _DMX_GET_CAPS: - -============ -DMX_GET_CAPS -============ - -Name ----- - -DMX_GET_CAPS - - -Synopsis --------- - -.. c:function:: int ioctl(fd, DMX_GET_CAPS, struct dmx_caps *caps) - :name: DMX_GET_CAPS - -Arguments ---------- - -``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. - -``caps`` - Pointer to struct :c:type:`dmx_caps` - - -Description ------------ - -.. note:: This ioctl is undocumented. Documentation is welcome. - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-get-event.rst b/Documentation/media/uapi/dvb/dmx-get-event.rst deleted file mode 100644 index 8be626c29158..000000000000 --- a/Documentation/media/uapi/dvb/dmx-get-event.rst +++ /dev/null @@ -1,60 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _DMX_GET_EVENT: - -============= -DMX_GET_EVENT -============= - -Name ----- - -DMX_GET_EVENT - - -Synopsis --------- - -.. c:function:: int ioctl( int fd, DMX_GET_EVENT, struct dmx_event *ev) - :name: DMX_GET_EVENT - - -Arguments ---------- - -``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. - -``ev`` - Pointer to the location where the event is to be stored. - - -Description ------------ - -This ioctl call returns an event if available. If an event is not -available, the behavior depends on whether the device is in blocking or -non-blocking mode. In the latter case, the call fails immediately with -errno set to ``EWOULDBLOCK``. In the former case, the call blocks until an -event becomes available. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EWOULDBLOCK`` - - - There is no event pending, and the device is in non-blocking mode. diff --git a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst index b31634a1cca4..fbdbc12869d1 100644 --- a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst +++ b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst @@ -25,18 +25,40 @@ Arguments File descriptor returned by :c:func:`open() <dvb-dmx-open>`. ``pids`` - Undocumented. + Array used to store 5 Program IDs. Description ----------- -.. note:: This ioctl is undocumented. Documentation is welcome. +This ioctl allows to query a DVB device to return the first PID used +by audio, video, textext, subtitle and PCR programs on a given service. +They're stored as: + +======================= ======== ======================================= +PID element position content +======================= ======== ======================================= +pids[DMX_PES_AUDIO] 0 first audio PID +pids[DMX_PES_VIDEO] 1 first video PID +pids[DMX_PES_TELETEXT] 2 first teletext PID +pids[DMX_PES_SUBTITLE] 3 first subtitle PID +pids[DMX_PES_PCR] 4 first Program Clock Reference PID +======================= ======== ======================================= + + +.. note:: + + A value equal to 0xffff means that the PID was not filled by the + Kernel. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-get-stc.rst b/Documentation/media/uapi/dvb/dmx-get-stc.rst index 9fc501e8128a..604031f7904b 100644 --- a/Documentation/media/uapi/dvb/dmx-get-stc.rst +++ b/Documentation/media/uapi/dvb/dmx-get-stc.rst @@ -25,34 +25,42 @@ Arguments File descriptor returned by :c:func:`open() <dvb-dmx-open>`. ``stc`` - Pointer to the location where the stc is to be stored. + Pointer to :c:type:`dmx_stc` where the stc data is to be stored. Description ----------- This ioctl call returns the current value of the system time counter -(which is driven by a PES filter of type DMX_PES_PCR). Some hardware -supports more than one STC, so you must specify which one by setting the -num field of stc before the ioctl (range 0...n). The result is returned -in form of a ratio with a 64 bit numerator and a 32 bit denominator, so -the real 90kHz STC value is stc->stc / stc->base . +(which is driven by a PES filter of type :c:type:`DMX_PES_PCR <dmx_ts_pes>`). +Some hardware supports more than one STC, so you must specify which one by +setting the :c:type:`num <dmx_stc>` field of stc before the ioctl (range 0...n). +The result is returned in form of a ratio with a 64 bit numerator +and a 32 bit denominator, so the real 90kHz STC value is +``stc->stc / stc->base``. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - + :widths: 1 16 - .. row 1 - ``EINVAL`` - Invalid stc number. + + +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-remove-pid.rst b/Documentation/media/uapi/dvb/dmx-remove-pid.rst index e411495c619c..456cc2ded2c0 100644 --- a/Documentation/media/uapi/dvb/dmx-remove-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-remove-pid.rst @@ -34,13 +34,17 @@ Description This ioctl call allows to remove a PID when multiple PIDs are set on a transport stream filter, e. g. a filter previously set up with output -equal to DMX_OUT_TSDEMUX_TAP, created via either -DMX_SET_PES_FILTER or DMX_ADD_PID. +equal to :c:type:`DMX_OUT_TSDEMUX_TAP <dmx_output>`, created via either +:ref:`DMX_SET_PES_FILTER` or :ref:`DMX_ADD_PID`. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst index f2f7379f29ed..74fd076a9b90 100644 --- a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst +++ b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst @@ -33,13 +33,18 @@ Description This ioctl call is used to set the size of the circular buffer used for filtered data. The default size is two maximum sized sections, i.e. if -this function is not called a buffer size of 2 \* 4096 bytes will be +this function is not called a buffer size of ``2 * 4096`` bytes will be used. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the + +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-filter.rst b/Documentation/media/uapi/dvb/dmx-set-filter.rst index 1d50c803d69a..88594b8d3846 100644 --- a/Documentation/media/uapi/dvb/dmx-set-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-filter.rst @@ -40,13 +40,18 @@ state whether a section should be CRC-checked, whether the filter should be a ”one-shot” filter, i.e. if the filtering operation should be stopped after the first section is received, and whether the filtering operation should be started immediately (without waiting for a -DMX_START ioctl call). If a filter was previously set-up, this filter -will be canceled, and the receive buffer will be flushed. +:ref:`DMX_START` ioctl call). If a filter was previously set-up, this +filter will be canceled, and the receive buffer will be flushed. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the + +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst index 145451d04f7d..d70e7bf96a41 100644 --- a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst @@ -42,15 +42,17 @@ capability is supported. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. .. tabularcolumns:: |p{2.5cm}|p{15.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - .. row 1 @@ -61,3 +63,7 @@ appropriately. The generic error codes are described at the There are active filters filtering data from another input source. Make sure that these filters are stopped before starting this filter. + + +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-source.rst b/Documentation/media/uapi/dvb/dmx-set-source.rst deleted file mode 100644 index ac7f77b25e06..000000000000 --- a/Documentation/media/uapi/dvb/dmx-set-source.rst +++ /dev/null @@ -1,44 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _DMX_SET_SOURCE: - -============== -DMX_SET_SOURCE -============== - -Name ----- - -DMX_SET_SOURCE - - -Synopsis --------- - -.. c:function:: int ioctl(fd, DMX_SET_SOURCE, struct dmx_source *src) - :name: DMX_SET_SOURCE - - -Arguments ---------- - - -``fd`` - File descriptor returned by :c:func:`open() <dvb-dmx-open>`. - -``src`` - Undocumented. - - -Description ------------ - -.. note:: This ioctl is undocumented. Documentation is welcome. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-start.rst b/Documentation/media/uapi/dvb/dmx-start.rst index 641f3e017fb1..36700e775296 100644 --- a/Documentation/media/uapi/dvb/dmx-start.rst +++ b/Documentation/media/uapi/dvb/dmx-start.rst @@ -29,15 +29,16 @@ Description ----------- This ioctl call is used to start the actual filtering operation defined -via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER. +via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER`. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. .. tabularcolumns:: |p{2.5cm}|p{15.0cm}| @@ -51,7 +52,7 @@ appropriately. The generic error codes are described at the - ``EINVAL`` - Invalid argument, i.e. no filtering parameters provided via the - DMX_SET_FILTER or DMX_SET_PES_FILTER functions. + :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` ioctls. - .. row 2 @@ -61,3 +62,7 @@ appropriately. The generic error codes are described at the There are active filters filtering data from another input source. Make sure that these filters are stopped before starting this filter. + + +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-stop.rst b/Documentation/media/uapi/dvb/dmx-stop.rst index 569a3df44923..6d9c927bcd5f 100644 --- a/Documentation/media/uapi/dvb/dmx-stop.rst +++ b/Documentation/media/uapi/dvb/dmx-stop.rst @@ -29,13 +29,17 @@ Description ----------- This ioctl call is used to stop the actual filtering operation defined -via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and -started via the DMX_START command. +via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` and +started via the :ref:`DMX_START` command. Return Value ------------ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx_fcalls.rst b/Documentation/media/uapi/dvb/dmx_fcalls.rst index 77a1554d9834..a17289143220 100644 --- a/Documentation/media/uapi/dvb/dmx_fcalls.rst +++ b/Documentation/media/uapi/dvb/dmx_fcalls.rst @@ -18,10 +18,7 @@ Demux Function Calls dmx-set-filter dmx-set-pes-filter dmx-set-buffer-size - dmx-get-event dmx-get-stc dmx-get-pes-pids - dmx-get-caps - dmx-set-source dmx-add-pid dmx-remove-pid diff --git a/Documentation/media/uapi/dvb/dmx_h.rst b/Documentation/media/uapi/dvb/dmx_h.rst deleted file mode 100644 index 4fd1704a0833..000000000000 --- a/Documentation/media/uapi/dvb/dmx_h.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _dmx_h: - -********************* -DVB Demux Header File -********************* - -.. kernel-include:: $BUILDDIR/dmx.h.rst diff --git a/Documentation/media/uapi/dvb/dmx_types.rst b/Documentation/media/uapi/dvb/dmx_types.rst index 80dd659860d7..2a023a4f516c 100644 --- a/Documentation/media/uapi/dvb/dmx_types.rst +++ b/Documentation/media/uapi/dvb/dmx_types.rst @@ -6,227 +6,4 @@ Demux Data Types **************** -Output for the demux -==================== - -.. c:type:: dmx_output - -.. tabularcolumns:: |p{5.0cm}|p{12.5cm}| - -.. flat-table:: enum dmx_output - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _DMX-OUT-DECODER: - - DMX_OUT_DECODER - - - Streaming directly to decoder. - - - .. row 3 - - - .. _DMX-OUT-TAP: - - DMX_OUT_TAP - - - Output going to a memory buffer (to be retrieved via the read - command). Delivers the stream output to the demux device on which - the ioctl is called. - - - .. row 4 - - - .. _DMX-OUT-TS-TAP: - - DMX_OUT_TS_TAP - - - Output multiplexed into a new TS (to be retrieved by reading from - the logical DVR device). Routes output to the logical DVR device - ``/dev/dvb/adapter?/dvr?``, which delivers a TS multiplexed from - all filters for which ``DMX_OUT_TS_TAP`` was specified. - - - .. row 5 - - - .. _DMX-OUT-TSDEMUX-TAP: - - DMX_OUT_TSDEMUX_TAP - - - Like :ref:`DMX_OUT_TS_TAP <DMX-OUT-TS-TAP>` but retrieved - from the DMX device. - - -dmx_input_t -=========== - -.. c:type:: dmx_input - -.. code-block:: c - - typedef enum - { - DMX_IN_FRONTEND, /* Input from a front-end device. */ - DMX_IN_DVR /* Input from the logical DVR device. */ - } dmx_input_t; - - -dmx_pes_type_t -============== - -.. c:type:: dmx_pes_type - - -.. code-block:: c - - typedef enum - { - DMX_PES_AUDIO0, - DMX_PES_VIDEO0, - DMX_PES_TELETEXT0, - DMX_PES_SUBTITLE0, - DMX_PES_PCR0, - - DMX_PES_AUDIO1, - DMX_PES_VIDEO1, - DMX_PES_TELETEXT1, - DMX_PES_SUBTITLE1, - DMX_PES_PCR1, - - DMX_PES_AUDIO2, - DMX_PES_VIDEO2, - DMX_PES_TELETEXT2, - DMX_PES_SUBTITLE2, - DMX_PES_PCR2, - - DMX_PES_AUDIO3, - DMX_PES_VIDEO3, - DMX_PES_TELETEXT3, - DMX_PES_SUBTITLE3, - DMX_PES_PCR3, - - DMX_PES_OTHER - } dmx_pes_type_t; - - -struct dmx_filter -================= - -.. c:type:: dmx_filter - -.. code-block:: c - - typedef struct dmx_filter - { - __u8 filter[DMX_FILTER_SIZE]; - __u8 mask[DMX_FILTER_SIZE]; - __u8 mode[DMX_FILTER_SIZE]; - } dmx_filter_t; - - -.. c:type:: dmx_sct_filter_params - -struct dmx_sct_filter_params -============================ - - -.. code-block:: c - - struct dmx_sct_filter_params - { - __u16 pid; - dmx_filter_t filter; - __u32 timeout; - __u32 flags; - #define DMX_CHECK_CRC 1 - #define DMX_ONESHOT 2 - #define DMX_IMMEDIATE_START 4 - #define DMX_KERNEL_CLIENT 0x8000 - }; - - -struct dmx_pes_filter_params -============================ - -.. c:type:: dmx_pes_filter_params - -.. code-block:: c - - struct dmx_pes_filter_params - { - __u16 pid; - dmx_input_t input; - dmx_output_t output; - dmx_pes_type_t pes_type; - __u32 flags; - }; - - -struct dmx_event -================ - -.. c:type:: dmx_event - -.. code-block:: c - - struct dmx_event - { - dmx_event_t event; - time_t timeStamp; - union - { - dmx_scrambling_status_t scrambling; - } u; - }; - - -struct dmx_stc -============== - -.. c:type:: dmx_stc - -.. code-block:: c - - struct dmx_stc { - unsigned int num; /* input : which STC? 0..N */ - unsigned int base; /* output: divisor for stc to get 90 kHz clock */ - __u64 stc; /* output: stc in 'base'*90 kHz units */ - }; - - -struct dmx_caps -=============== - -.. c:type:: dmx_caps - -.. code-block:: c - - typedef struct dmx_caps { - __u32 caps; - int num_decoders; - } dmx_caps_t; - - -enum dmx_source -=============== - -.. c:type:: dmx_source - -.. code-block:: c - - typedef enum dmx_source { - DMX_SOURCE_FRONT0 = 0, - DMX_SOURCE_FRONT1, - DMX_SOURCE_FRONT2, - DMX_SOURCE_FRONT3, - DMX_SOURCE_DVR0 = 16, - DMX_SOURCE_DVR1, - DMX_SOURCE_DVR2, - DMX_SOURCE_DVR3 - } dmx_source_t; +.. kernel-doc:: include/uapi/linux/dvb/dmx.h diff --git a/Documentation/media/uapi/dvb/dtv-fe-stats.rst b/Documentation/media/uapi/dvb/dtv-fe-stats.rst deleted file mode 100644 index e8a02a1f138d..000000000000 --- a/Documentation/media/uapi/dvb/dtv-fe-stats.rst +++ /dev/null @@ -1,17 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_fe_stats - -******************* -struct dtv_fe_stats -******************* - - -.. code-block:: c - - #define MAX_DTV_STATS 4 - - struct dtv_fe_stats { - __u8 len; - struct dtv_stats stat[MAX_DTV_STATS]; - } __packed; diff --git a/Documentation/media/uapi/dvb/dtv-properties.rst b/Documentation/media/uapi/dvb/dtv-properties.rst deleted file mode 100644 index 48c4e834ad11..000000000000 --- a/Documentation/media/uapi/dvb/dtv-properties.rst +++ /dev/null @@ -1,15 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_properties - -********************* -struct dtv_properties -********************* - - -.. code-block:: c - - struct dtv_properties { - __u32 num; - struct dtv_property *props; - }; diff --git a/Documentation/media/uapi/dvb/dtv-property.rst b/Documentation/media/uapi/dvb/dtv-property.rst deleted file mode 100644 index 3ddc3474b00e..000000000000 --- a/Documentation/media/uapi/dvb/dtv-property.rst +++ /dev/null @@ -1,31 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_property - -******************* -struct dtv_property -******************* - - -.. code-block:: c - - /* Reserved fields should be set to 0 */ - - struct dtv_property { - __u32 cmd; - __u32 reserved[3]; - union { - __u32 data; - struct dtv_fe_stats st; - struct { - __u8 data[32]; - __u32 len; - __u32 reserved1[3]; - void *reserved2; - } buffer; - } u; - int result; - } __attribute__ ((packed)); - - /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ - #define DTV_IOCTL_MAX_MSGS 64 diff --git a/Documentation/media/uapi/dvb/dtv-stats.rst b/Documentation/media/uapi/dvb/dtv-stats.rst deleted file mode 100644 index 35239e72bf74..000000000000 --- a/Documentation/media/uapi/dvb/dtv-stats.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. c:type:: dtv_stats - -**************** -struct dtv_stats -**************** - - -.. code-block:: c - - struct dtv_stats { - __u8 scale; /* enum fecap_scale_params type */ - union { - __u64 uvalue; /* for counters and relative scales */ - __s64 svalue; /* for 1/1000 dB measures */ - }; - } __packed; diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst index 76c20612b274..212f032cad8b 100644 --- a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst +++ b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst @@ -20,6 +20,6 @@ Signal statistics are provided via .. note:: Most statistics require the demodulator to be fully locked - (e. g. with FE_HAS_LOCK bit set). See + (e. g. with :c:type:`FE_HAS_LOCK <fe_status>` bit set). See :ref:`Frontend statistics indicators <frontend-stat-properties>` for more details. diff --git a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst index 899fd5c3545e..b152166f8fa7 100644 --- a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst +++ b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst @@ -24,7 +24,7 @@ instead, in order to be able to support the newer System Delivery like DVB-S2, DVB-T2, DVB-C2, ISDB, etc. All kinds of parameters are combined as a union in the -FrontendParameters structure: +``dvb_frontend_parameters`` structure: .. code-block:: c diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst index 37680137e3f2..18c86b3a3af1 100644 --- a/Documentation/media/uapi/dvb/dvbapi.rst +++ b/Documentation/media/uapi/dvb/dvbapi.rst @@ -10,12 +10,27 @@ Part II - Digital TV API .. note:: - This API is also known as **DVB API**, although it is generic - enough to support all digital TV standards. + This API is also known as Linux **DVB API**. + + It it was originally written to support the European digital TV + standard (DVB), and later extended to support all digital TV standards. + + In order to avoid confusion, within this document, it was opted to refer to + it, and to associated hardware as **Digital TV**. + + The word **DVB** is reserved to be used for: + + - the Digital TV API version + (e. g. DVB API version 3 or DVB API version 5); + - digital TV data types (enums, structs, defines, etc); + - digital TV device nodes (``/dev/dvb/...``); + - the European DVB standard. **Version 5.10** -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents @@ -30,12 +45,7 @@ Part II - Digital TV API net legacy_dvb_apis examples - audio_h - ca_h - dmx_h - frontend_h - net_h - video_h + headers ********************** @@ -46,11 +56,11 @@ Authors: - J. K. Metzler, Ralph <rjkm@metzlerbros.de> - - Original author of the DVB API documentation. + - Original author of the Digital TV API documentation. - O. C. Metzler, Marcus <rjkm@metzlerbros.de> - - Original author of the DVB API documentation. + - Original author of the Digital TV API documentation. - Carvalho Chehab, Mauro <m.chehab@kernel.org> @@ -58,21 +68,26 @@ Authors: **Copyright** |copy| 2002-2003 : Convergence GmbH -**Copyright** |copy| 2009-2016 : Mauro Carvalho Chehab +**Copyright** |copy| 2009-2017 : Mauro Carvalho Chehab **************** Revision History **************** +:revision: 2.2.0 / 2017-09-01 (*mcc*) + +Most gaps between the uAPI document and the Kernel implementation +got fixed for the non-legacy API. + :revision: 2.1.0 / 2015-05-29 (*mcc*) DocBook improvements and cleanups, in order to document the system calls on a more standard way and provide more description about the current -DVB API. +Digital TV API. :revision: 2.0.4 / 2011-05-06 (*mcc*) -Add more information about DVB APIv5, better describing the frontend +Add more information about DVBv5 API, better describing the frontend GET/SET props ioctl's. diff --git a/Documentation/media/uapi/dvb/dvbproperty-006.rst b/Documentation/media/uapi/dvb/dvbproperty-006.rst deleted file mode 100644 index 3343a0f306fe..000000000000 --- a/Documentation/media/uapi/dvb/dvbproperty-006.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -************** -Property types -************** - -On :ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>`, -the actual action is determined by the dtv_property cmd/data pairs. -With one single ioctl, is possible to get/set up to 64 properties. The -actual meaning of each property is described on the next sections. - -The available frontend property types are shown on the next section. diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst index dd2d71ce43fa..1a56c1724e59 100644 --- a/Documentation/media/uapi/dvb/dvbproperty.rst +++ b/Documentation/media/uapi/dvb/dvbproperty.rst @@ -2,63 +2,76 @@ .. _frontend-properties: -DVB Frontend properties -======================= +************** +Property types +************** Tuning into a Digital TV physical channel and starting decoding it requires changing a set of parameters, in order to control the tuner, the demodulator, the Linear Low-noise Amplifier (LNA) and to set the -antenna subsystem via Satellite Equipment Control (SEC), on satellite -systems. The actual parameters are specific to each particular digital +antenna subsystem via Satellite Equipment Control - SEC (on satellite +systems). The actual parameters are specific to each particular digital TV standards, and may change as the digital TV specs evolves. -In the past, the strategy used was to have a union with the parameters -needed to tune for DVB-S, DVB-C, DVB-T and ATSC delivery systems grouped -there. The problem is that, as the second generation standards appeared, -those structs were not big enough to contain the additional parameters. -Also, the union didn't have any space left to be expanded without -breaking userspace. So, the decision was to deprecate the legacy -union/struct based approach, in favor of a properties set approach. +In the past (up to DVB API version 3 - DVBv3), the strategy used was to have a +union with the parameters needed to tune for DVB-S, DVB-C, DVB-T and +ATSC delivery systems grouped there. The problem is that, as the second +generation standards appeared, the size of such union was not big +enough to group the structs that would be required for those new +standards. Also, extending it would break userspace. + +So, the legacy union/struct based approach was deprecated, in favor +of a properties set approach. On such approach, +:ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>` are used +to setup the frontend and read its status. + +The actual action is determined by a set of dtv_property cmd/data pairs. +With one single ioctl, is possible to get/set up to 64 properties. + +This section describes the new and recommended way to set the frontend, +with supports all digital TV delivery systems. .. note:: - On Linux DVB API version 3, setting a frontend were done via - struct :c:type:`dvb_frontend_parameters`. - This got replaced on version 5 (also called "S2API", as this API were - added originally_enabled to provide support for DVB-S2), because the - old API has a very limited support to new standards and new hardware. - This section describes the new and recommended way to set the frontend, - with suppports all digital TV delivery systems. - -Example: with the properties based approach, in order to set the tuner -to a DVB-C channel at 651 kHz, modulated with 256-QAM, FEC 3/4 and -symbol rate of 5.217 Mbauds, those properties should be sent to + 1. On Linux DVB API version 3, setting a frontend was done via + struct :c:type:`dvb_frontend_parameters`. + + 2. Don't use DVB API version 3 calls on hardware with supports + newer standards. Such API provides no suport or a very limited + support to new standards and/or new hardware. + + 3. Nowadays, most frontends support multiple delivery systems. + Only with DVB API version 5 calls it is possible to switch between + the multiple delivery systems supported by a frontend. + + 4. DVB API version 5 is also called *S2API*, as the first + new standard added to it was DVB-S2. + +**Example**: in order to set the hardware to tune into a DVB-C channel +at 651 kHz, modulated with 256-QAM, FEC 3/4 and symbol rate of 5.217 +Mbauds, those properties should be sent to :ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` ioctl: -- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` = - SYS_DVBC_ANNEX_A + :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` = SYS_DVBC_ANNEX_A -- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` = 651000000 + :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` = 651000000 -- :ref:`DTV_MODULATION <DTV-MODULATION>` = QAM_256 + :ref:`DTV_MODULATION <DTV-MODULATION>` = QAM_256 -- :ref:`DTV_INVERSION <DTV-INVERSION>` = INVERSION_AUTO + :ref:`DTV_INVERSION <DTV-INVERSION>` = INVERSION_AUTO -- :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` = 5217000 + :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` = 5217000 -- :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` = FEC_3_4 + :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` = FEC_3_4 -- :ref:`DTV_TUNE <DTV-TUNE>` + :ref:`DTV_TUNE <DTV-TUNE>` The code that would that would do the above is show in :ref:`dtv-prop-example`. -.. _dtv-prop-example: - -Example: Setting digital TV frontend properties -=============================================== - .. code-block:: c + :caption: Example: Setting digital TV frontend properties + :name: dtv-prop-example #include <stdio.h> #include <fcntl.h> @@ -102,17 +115,12 @@ Example: Setting digital TV frontend properties provides methods for usual operations like program scanning and to read/write channel descriptor files. - .. toctree:: :maxdepth: 1 - dtv-stats - dtv-fe-stats - dtv-property - dtv-properties - dvbproperty-006 fe_property_parameters frontend-stat-properties frontend-property-terrestrial-systems frontend-property-cable-systems frontend-property-satellite-systems + frontend-header diff --git a/Documentation/media/uapi/dvb/dvbstb.svg b/Documentation/media/uapi/dvb/dvbstb.svg index 4effe45b448d..f6fe2f837373 100644 --- a/Documentation/media/uapi/dvb/dvbstb.svg +++ b/Documentation/media/uapi/dvb/dvbstb.svg @@ -1,17 +1,16 @@ <?xml version="1.0" encoding="UTF-8"?> -<svg id="svg2" width="237.7mm" height="126.28mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.221 12628.221" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata519"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.111" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600h-9200z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600h-9200z" fill="none" stroke="#000"/><rect id="rect206" -class="BoundingBox" x="13.111" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="1281.111" y="5435.1108"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text> -<rect id="rect223" class="BoundingBox" x="6213.1" y="1813.1" width="4544" height="2403" fill="none"/><path id="path225" d="m8485.1 4214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path227" d="m8485.1 4214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text229" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="7217.1108" y="3235.1111"><tspan id="tspan235" fill="#000000">Frontend</tspan></tspan></tspan></text> -<rect id="rect240" class="BoundingBox" x="12113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path242" d="m14385 4214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path244" d="m14385 4214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text246" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="13944.111" y="3235.1111"><tspan id="tspan252" fill="#000000">CA</tspan></tspan></tspan></text> -<rect id="rect257" class="BoundingBox" x="18113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path259" d="m20385 4214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path261" d="m20385 4214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text263" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan265" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan267" class="TextPosition" x="19384.111" y="3235.1111"><tspan id="tspan269" fill="#000000">Demux</tspan></tspan></tspan></text> -<rect id="rect274" class="BoundingBox" x="6113.1" y="5813.1" width="4544" height="2403" fill="none"/><path id="path276" d="m8385.1 8214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path278" d="m8385.1 8214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text280" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan282" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan284" class="TextPosition" x="7733.1108" y="7235.1108"><tspan id="tspan286" fill="#000000">SEC</tspan></tspan></tspan></text> -<rect id="rect291" class="BoundingBox" x="12213" y="5813.1" width="4544" height="2403" fill="none"/><path id="path293" d="m14485 8214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path295" d="m14485 8214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text297" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan299" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan301" class="TextPosition" x="13676.111" y="7235.1108"><tspan id="tspan303" fill="#000000">Audio</tspan></tspan></tspan></text> -<rect id="rect308" class="BoundingBox" x="18113" y="5813.1" width="4544" height="2403" fill="none"/><path id="path310" d="m20385 8214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path312" d="m20385 8214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text314" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan316" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan318" class="TextPosition" x="19583.111" y="7235.1108"><tspan id="tspan320" fill="#000000">Video</tspan></tspan></tspan></text> -<rect id="rect325" class="BoundingBox" x="15213" y="10213" width="4544" height="2403" fill="none"/><path id="path327" d="m17485 12614h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path329" d="m17485 12614h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text331" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan333" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan335" class="TextPosition" x="17076.111" y="11635.111"><tspan id="tspan337" fill="#000000">TV</tspan></tspan></tspan></text> -<rect id="rect342" class="BoundingBox" x="4555.1" y="3014.1" width="1661" height="2202" fill="none"/><path id="path344" d="m4556.1 5214.1 1400-1857" fill="none" stroke="#000"/><path id="path346" d="m6215.1 3014.1-391 269 240 181 151-450z"/><rect id="rect351" class="BoundingBox" x="4555.1" y="5213.1" width="1561" height="1802" fill="none"/><path id="path353" d="m4556.1 5214.1 1277 1475" fill="none" stroke="#000"/><path id="path355" d="m6115.1 7014.1-181-438-227 196 408 242z"/><rect id="rect360" class="BoundingBox" x="10755" y="2864.1" width="1361" height="301" fill="none"/><path id="path362" d="m10756 3014.1h929" fill="none" stroke="#000"/><path id="path364" d="m12115 3014.1-450-150v300l450-150z"/><rect id="rect369" class="BoundingBox" x="16655" y="2864.1" width="1461" height="301" fill="none"/><path id="path371" d="m16656 3014.1h1029" fill="none" stroke="#000"/><path id="path373" -d="m18115 3014.1-450-150v300l450-150z"/><rect id="rect378" class="BoundingBox" x="20235" y="4213.1" width="301" height="1602" fill="none"/><path id="path380" d="m20385 4214.1v1170" fill="none" stroke="#000"/><path id="path382" d="m20385 5814.1 150-450h-300l150 450z"/><rect id="rect387" class="BoundingBox" x="17485" y="8213.1" width="2902" height="2002" fill="none"/><path id="path389" d="m20385 8214.1-2546 1756" fill="none" stroke="#000"/><path id="path391" d="m17485 10214 456-132-171-247-285 379z"/><rect id="rect396" class="BoundingBox" x="14484" y="8213.1" width="3002" height="2002" fill="none"/><path id="path398" d="m14485 8214.1 2642 1761" fill="none" stroke="#000"/><path id="path400" d="m17485 10214-291-374-167 249 458 125z"/><rect id="rect405" class="BoundingBox" x="14485" y="4213.1" width="5902" height="1629" fill="none"/><path id="path407" d="m20385 4214.1-51 14" fill="none" -stroke="#000"/><path id="path409" d="m20283 4242.1-52 14" fill="none" stroke="#000"/><path id="path411" d="m20180 4270.1-51 13" fill="none" stroke="#000"/><path id="path413" d="m20078 4297.1-52 14" fill="none" stroke="#000"/><path id="path415" d="m19975 4325.1-51 14" fill="none" stroke="#000"/><path id="path417" d="m19873 4353.1-52 14" fill="none" stroke="#000"/><path id="path419" d="m19770 4381.1-51 14" fill="none" stroke="#000"/><path id="path421" d="m19668 4409.1-52 13" fill="none" stroke="#000"/><path id="path423" d="m19565 4436.1-51 14" fill="none" stroke="#000"/><path id="path425" d="m19463 4464.1-52 14" fill="none" stroke="#000"/><path id="path427" d="m19360 4492.1-51 14" fill="none" stroke="#000"/><path id="path429" d="m19258 4520.1-52 14" fill="none" stroke="#000"/><path id="path431" d="m19155 4547.1-51 14" fill="none" stroke="#000"/><path id="path433" d="m19053 4575.1-52 14" -fill="none" stroke="#000"/><path id="path435" d="m18950 4603.1-51 14" fill="none" stroke="#000"/><path id="path437" d="m18848 4631.1-51 14" fill="none" stroke="#000"/><path id="path439" d="m18745 4659.1-51 14" fill="none" stroke="#000"/><path id="path441" d="m18643 4686.1-51 14" fill="none" stroke="#000"/><path id="path443" d="m18540 4714.1-51 14" fill="none" stroke="#000"/><path id="path445" d="m18438 4742.1-51 14" fill="none" stroke="#000"/><path id="path447" d="m18335 4770.1-51 14" fill="none" stroke="#000"/><path id="path449" d="m18233 4798.1-51 14" fill="none" stroke="#000"/><path id="path451" d="m18130 4825.1-51 14" fill="none" stroke="#000"/><path id="path453" d="m18028 4853.1-51 14" fill="none" stroke="#000"/><path id="path455" d="m17925 4881.1-51 14" fill="none" stroke="#000"/><path id="path457" d="m17823 4909.1-51 14" fill="none" stroke="#000"/><path id="path459" d="m17720 -4937.1-51 13" fill="none" stroke="#000"/><path id="path461" d="m17618 4964.1-51 14" fill="none" stroke="#000"/><path id="path463" d="m17516 4992.1-52 14" fill="none" stroke="#000"/><path id="path465" d="m17413 5020.1-51 14" fill="none" stroke="#000"/><path id="path467" d="m17311 5048.1-52 14" fill="none" stroke="#000"/><path id="path469" d="m17208 5076.1-51 13" fill="none" stroke="#000"/><path id="path471" d="m17106 5103.1-52 14" fill="none" stroke="#000"/><path id="path473" d="m17003 5131.1-51 14" fill="none" stroke="#000"/><path id="path475" d="m16901 5159.1-52 14" fill="none" stroke="#000"/><path id="path477" d="m16798 5187.1-51 14" fill="none" stroke="#000"/><path id="path479" d="m16696 5214.1-52 14" fill="none" stroke="#000"/><path id="path481" d="m16593 5242.1-51 14" fill="none" stroke="#000"/><path id="path483" d="m16491 5270.1-52 14" fill="none" stroke="#000"/><path id="path485" -d="m16388 5298.1-51 14" fill="none" stroke="#000"/><path id="path487" d="m16286 5326.1-52 14" fill="none" stroke="#000"/><path id="path489" d="m16183 5353.1-51 14" fill="none" stroke="#000"/><path id="path491" d="m16081 5381.1-51 14" fill="none" stroke="#000"/><path id="path493" d="m15978 5409.1-51 14" fill="none" stroke="#000"/><path id="path495" d="m15876 5437.1-51 14" fill="none" stroke="#000"/><path id="path497" d="m15773 5465.1-51 14" fill="none" stroke="#000"/><path id="path499" d="m15671 5492.1-51 14" fill="none" stroke="#000"/><path id="path501" d="m15568 5520.1-51 14" fill="none" stroke="#000"/><path id="path503" d="m15466 5548.1-51 14" fill="none" stroke="#000"/><path id="path505" d="m15363 5576.1-51 14" fill="none" stroke="#000"/><path id="path507" d="m15261 5604.1-51 13" fill="none" stroke="#000"/><path id="path509" d="m15158 5631.1-51 14" fill="none" stroke="#000"/><path -id="path511" d="m15056 5659.1-51 14" fill="none" stroke="#000"/><path id="path513" d="m14953 5687.1-51 14" fill="none" stroke="#000"/><path id="path515" d="m14485 5814.1 474 27-79-290-395 263z"/></svg> +<svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work +rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" +x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text> +<rect id="rect223" class="BoundingBox" x="6213.1" y="1813.1" width="4544" height="2403" fill="none"/><path id="path225" d="m8485.1 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path227" d="m8485.1 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text229" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="7217.1221" y="3235.1221"><tspan id="tspan235" fill="#000000">Frontend</tspan></tspan></tspan></text> +<rect id="rect240" class="BoundingBox" x="12113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path242" d="m14385 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path244" d="m14385 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text246" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="13944.122" y="3235.1221"><tspan id="tspan252" fill="#000000">CA</tspan></tspan></tspan></text> +<rect id="rect257" class="BoundingBox" x="18113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path259" d="m20385 4214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path261" d="m20385 4214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text263" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan265" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan267" class="TextPosition" x="19384.123" y="3235.1221"><tspan id="tspan269" fill="#000000">Demux</tspan></tspan></tspan></text> +<rect id="rect274" class="BoundingBox" x="6113.1" y="5813.1" width="4544" height="2403" fill="none"/><path id="path276" d="m8385.1 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path278" d="m8385.1 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text280" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan282" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan284" class="TextPosition" x="7733.1221" y="7235.1221"><tspan id="tspan286" fill="#000000">SEC</tspan></tspan></tspan></text> +<rect id="rect291" class="BoundingBox" x="12213" y="5813.1" width="4544" height="2403" fill="none"/><path id="path293" d="m14485 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path295" d="m14485 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text297" class="TextShape" x="-2443.8779" y="-4903.3779"><tspan id="tspan299" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan301" class="TextPosition" x="13676.122" y="6917.6221"><tspan id="tspan303" fill="#000000">Audio</tspan></tspan></tspan></text> +<rect id="rect308" class="BoundingBox" x="18113" y="5813.1" width="4544" height="2403" fill="none"/><path id="path310" d="m20385 8214.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path312" d="m20385 8214.1h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text314" class="TextShape" x="-2443.8779" y="-4903.3779"><tspan id="tspan316" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan318" class="TextPosition" x="19583.123" y="6917.6221"><tspan id="tspan320" fill="#000000">Video</tspan></tspan></tspan></text> +<rect id="rect325" class="BoundingBox" x="15213" y="10213" width="4544" height="2403" fill="none"/><path id="path327" d="m17485 12614h-2271v-2400h4541v2400z" fill="#fff"/><path id="path329" d="m17485 12614h-2271v-2400h4541v2400z" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><text id="text331" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan333" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan335" class="TextPosition" x="17076.123" y="11635.122"><tspan id="tspan337" fill="#000000">TV</tspan></tspan></tspan></text> +<rect id="rect342" class="BoundingBox" x="4555.1" y="3014.1" width="1661" height="2202" fill="none"/><path id="path344" d="m4556.1 5214.1 1400-1857" fill="none" stroke="#000"/><path id="path346" d="m6215.1 3014.1-391 269 240 181z"/><rect id="rect351" class="BoundingBox" x="4555.1" y="5213.1" width="1561" height="1802" fill="none"/><path id="path353" d="m4556.1 5214.1 1277 1475" fill="none" stroke="#000"/><path id="path355" d="m6115.1 7014.1-181-438-227 196z"/><rect id="rect360" class="BoundingBox" x="10755" y="2864.1" width="1361" height="301" fill="none"/><path id="path362" d="m10756 3014.1h929" fill="none" stroke="#000"/><path id="path364" d="m12115 3014.1-450-150v300z"/><rect id="rect369" class="BoundingBox" x="16655" y="2864.1" width="1461" height="301" fill="none"/><path id="path371" d="m16656 3014.1h1029" fill="none" stroke="#000"/><path id="path373" d="m18115 +3014.1-450-150v300z"/><rect id="rect378" class="BoundingBox" x="20235" y="4213.1" width="301" height="1602" fill="none"/><rect id="rect387" class="BoundingBox" x="17485" y="8213.1" width="2902" height="2002" fill="none"/><path id="path389" d="m20385 8214.1-2546 1756" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><path id="path391" d="m17485 10214 456-132-171-247z"/><rect id="rect396" class="BoundingBox" x="14484" y="8213.1" width="3002" height="2002" fill="none"/><path id="path398" d="m14485 8214.1 2642 1761" fill="none" stroke="#000" stroke-dasharray="28.22200113,56.44400226" stroke-width="28.222"/><path id="path400" d="m17485 10214-291-374-167 249z"/><rect id="rect405" class="BoundingBox" x="14485" y="4213.1" width="5902" height="1629" fill="none"/><path id="path949" d="m20387 4213.1v1629" fill="none" marker-end="url(#Arrow1Lend)" +stroke="#000" stroke-dasharray="26.45879596, 52.91759192999999328" stroke-linejoin="miter" stroke-width="26.459"/><path id="path1233" d="m20385 4214.1-3628 1599" fill="none" marker-end="url(#marker1243)" stroke="#000" stroke-dasharray="26.45879596, 52.91759193" stroke-linejoin="miter" stroke-width="26.459"/><text id="text297-3" class="TextShape" x="-2911.9202" y="-4257.2061" font-size="12px" stroke-width="1"><tspan id="tspan299-6" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400" stroke-width="1"><tspan id="tspan301-7" class="TextPosition" x="13208.079" y="7563.793" stroke-width="1"><tspan id="tspan303-5" fill="#000000" stroke-width="1">Decoder</tspan></tspan></tspan></text> +<text id="text297-3-3" class="TextShape" x="2950.9287" y="-4259.5928" font-size="12px" stroke-width="1"><tspan id="tspan299-6-5" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400" stroke-width="1"><tspan id="tspan301-7-6" class="TextPosition" x="19070.928" y="7561.4053" stroke-width="1"><tspan id="tspan303-5-2" fill="#000000" stroke-width="1">Decoder</tspan></tspan></tspan></text> +</svg> diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst index 1a94966312c0..e0f627ca2e4d 100644 --- a/Documentation/media/uapi/dvb/examples.rst +++ b/Documentation/media/uapi/dvb/examples.rst @@ -6,8 +6,8 @@ Examples ******** -In this section we would like to present some examples for using the DVB -API. +In this section we would like to present some examples for using the Digital +TV API. .. note:: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst index 302db2857f90..f220ee351e15 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst @@ -26,8 +26,7 @@ Arguments File descriptor returned by :ref:`open() <frontend_f_open>`. ``argp`` - pointer to struct - :c:type:`dvb_diseqc_slave_reply` + pointer to struct :c:type:`dvb_diseqc_slave_reply`. Description @@ -35,46 +34,15 @@ Description Receives reply from a DiSEqC 2.0 command. -.. c:type:: dvb_diseqc_slave_reply - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - -.. flat-table:: struct dvb_diseqc_slave_reply - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - - - .. row 1 - - - uint8_t - - - msg[4] - - - DiSEqC message (framing, data[3]) - - - .. row 2 - - - uint8_t - - - msg_len - - - Length of the DiSEqC message. Valid values are 0 to 4, where 0 - means no msg - - - .. row 3 - - - int - - - timeout - - - Return from ioctl after timeout ms with errorcode when no message - was received - +The received message is stored at the buffer pointed by ``argp``. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst index 75116f283faf..78476c1c7bf5 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst @@ -31,12 +31,16 @@ Description If the bus has been automatically powered off due to power overload, this ioctl call restores the power to the bus. The call requires read/write access to the device. This call has no effect if the device -is manually powered off. Not all DVB adapters support this ioctl. +is manually powered off. Not all Digital TV adapters support this ioctl. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst index e962f6ec5aaf..a7e05914efae 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst @@ -26,7 +26,7 @@ Arguments File descriptor returned by :ref:`open() <frontend_f_open>`. ``tone`` - an integer enumered value described at :c:type:`fe_sec_mini_cmd` + An integer enumered value described at :c:type:`fe_sec_mini_cmd`. Description @@ -39,39 +39,14 @@ read/write permissions. It provides support for what's specified at `Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__ -.. c:type:: fe_sec_mini_cmd - -.. flat-table:: enum fe_sec_mini_cmd - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SEC-MINI-A: - - ``SEC_MINI_A`` - - - Sends a mini-DiSEqC 22kHz '0' Tone Burst to select satellite-A - - - .. row 3 - - - .. _SEC-MINI-B: - - ``SEC_MINI_B`` - - - Sends a mini-DiSEqC 22kHz '1' Data Burst to select satellite-B - Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst index bbcab3df39b5..6bd3994edfc2 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst @@ -33,39 +33,17 @@ Arguments Description =========== -Sends a DiSEqC command to the antenna subsystem. - - -.. c:type:: dvb_diseqc_master_cmd - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - -.. flat-table:: struct dvb_diseqc_master_cmd - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - - - .. row 1 - - - uint8_t - - - msg[6] - - - DiSEqC message (framing, address, command, data[3]) - - - .. row 2 - - - uint8_t - - - msg_len - - - Length of the DiSEqC message. Valid values are 3 to 6 +Sends the DiSEqC command pointed by :c:type:`dvb_diseqc_master_cmd` +to the antenna subsystem. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst index f41371f12456..dcf2d20d460f 100644 --- a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst @@ -46,6 +46,10 @@ dishes were already legacy in 2004. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst index bacafbc462d2..b20cb360fe37 100644 --- a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst +++ b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst @@ -45,6 +45,10 @@ voltages. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-get-event.rst b/Documentation/media/uapi/dvb/fe-get-event.rst index 8a719c33073d..505db94bf183 100644 --- a/Documentation/media/uapi/dvb/fe-get-event.rst +++ b/Documentation/media/uapi/dvb/fe-get-event.rst @@ -44,10 +44,10 @@ an event becomes available. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. +On success 0 is returned. +On error -1 is returned, and the ``errno`` variable is set +appropriately. .. flat-table:: @@ -66,3 +66,6 @@ appropriately. The generic error codes are described at the - ``EOVERFLOW`` - Overflow in event queue - one or more events were lost. + +Generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-get-frontend.rst b/Documentation/media/uapi/dvb/fe-get-frontend.rst index d53a3f8237c3..5db552cedd70 100644 --- a/Documentation/media/uapi/dvb/fe-get-frontend.rst +++ b/Documentation/media/uapi/dvb/fe-get-frontend.rst @@ -42,11 +42,10 @@ this command, read-only access to the device is sufficient. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - +On success 0 is returned. +On error -1 is returned, and the ``errno`` variable is set +appropriately. .. flat-table:: :header-rows: 0 @@ -58,3 +57,6 @@ appropriately. The generic error codes are described at the - ``EINVAL`` - Maximum supported symbol rate reached. + +Generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst index e3d64b251f61..49307c0abfee 100644 --- a/Documentation/media/uapi/dvb/fe-get-info.rst +++ b/Documentation/media/uapi/dvb/fe-get-info.rst @@ -9,7 +9,8 @@ ioctl FE_GET_INFO Name ==== -FE_GET_INFO - Query DVB frontend capabilities and returns information about the - front-end. This call only requires read-only access to the device +FE_GET_INFO - Query Digital TV frontend capabilities and returns information +about the - front-end. This call only requires read-only access to the device. Synopsis @@ -33,119 +34,13 @@ Arguments Description =========== -All DVB frontend devices support the ``FE_GET_INFO`` ioctl. It is used -to identify kernel devices compatible with this specification and to +All Digital TV frontend devices support the :ref:`FE_GET_INFO` ioctl. It is +used to identify kernel devices compatible with this specification and to obtain information about driver and hardware capabilities. The ioctl takes a pointer to dvb_frontend_info which is filled by the driver. When the driver is not compatible with this specification the ioctl returns an error. -.. c:type:: dvb_frontend_info - -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| - -.. flat-table:: struct dvb_frontend_info - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - - - .. row 1 - - - char - - - name[128] - - - Name of the frontend - - - .. row 2 - - - fe_type_t - - - type - - - **DEPRECATED**. DVBv3 type. Should not be used on modern programs, - as a frontend may have more than one type. So, the DVBv5 API - should be used instead to enumerate and select the frontend type. - - - .. row 3 - - - uint32_t - - - frequency_min - - - Minimal frequency supported by the frontend - - - .. row 4 - - - uint32_t - - - frequency_max - - - Maximal frequency supported by the frontend - - - .. row 5 - - - uint32_t - - - frequency_stepsize - - - Frequency step - all frequencies are multiple of this value - - - .. row 6 - - - uint32_t - - - frequency_tolerance - - - Tolerance of the frequency - - - .. row 7 - - - uint32_t - - - symbol_rate_min - - - Minimal symbol rate (for Cable/Satellite systems), in bauds - - - .. row 8 - - - uint32_t - - - symbol_rate_max - - - Maximal symbol rate (for Cable/Satellite systems), in bauds - - - .. row 9 - - - uint32_t - - - symbol_rate_tolerance - - - Maximal symbol rate tolerance, in ppm - - - .. row 10 - - - uint32_t - - - notifier_delay - - - **DEPRECATED**. Not used by any driver. - - - .. row 11 - - - enum :c:type:`fe_caps` - - - caps - - - Capabilities supported by the frontend - - -.. note:: - - The frequencies are specified in Hz for Terrestrial and Cable - systems. They're specified in kHz for Satellite systems - frontend capabilities ===================== @@ -153,274 +48,16 @@ frontend capabilities Capabilities describe what a frontend can do. Some capabilities are supported only on some specific frontend types. -.. c:type:: fe_caps - -.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| - -.. flat-table:: enum fe_caps - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _FE-IS-STUPID: - - ``FE_IS_STUPID`` - - - There's something wrong at the frontend, and it can't report its - capabilities - - - .. row 3 - - - .. _FE-CAN-INVERSION-AUTO: - - ``FE_CAN_INVERSION_AUTO`` - - - The frontend is capable of auto-detecting inversion - - - .. row 4 - - - .. _FE-CAN-FEC-1-2: - - ``FE_CAN_FEC_1_2`` - - - The frontend supports FEC 1/2 - - - .. row 5 - - - .. _FE-CAN-FEC-2-3: - - ``FE_CAN_FEC_2_3`` - - - The frontend supports FEC 2/3 - - - .. row 6 - - - .. _FE-CAN-FEC-3-4: - - ``FE_CAN_FEC_3_4`` - - - The frontend supports FEC 3/4 - - - .. row 7 - - - .. _FE-CAN-FEC-4-5: - - ``FE_CAN_FEC_4_5`` - - - The frontend supports FEC 4/5 - - - .. row 8 - - - .. _FE-CAN-FEC-5-6: - - ``FE_CAN_FEC_5_6`` - - - The frontend supports FEC 5/6 - - - .. row 9 - - - .. _FE-CAN-FEC-6-7: - - ``FE_CAN_FEC_6_7`` - - - The frontend supports FEC 6/7 - - - .. row 10 - - - .. _FE-CAN-FEC-7-8: - - ``FE_CAN_FEC_7_8`` - - - The frontend supports FEC 7/8 - - - .. row 11 - - - .. _FE-CAN-FEC-8-9: - - ``FE_CAN_FEC_8_9`` - - - The frontend supports FEC 8/9 - - - .. row 12 - - - .. _FE-CAN-FEC-AUTO: - - ``FE_CAN_FEC_AUTO`` - - - The frontend can autodetect FEC. - - - .. row 13 - - - .. _FE-CAN-QPSK: - - ``FE_CAN_QPSK`` - - - The frontend supports QPSK modulation - - - .. row 14 - - - .. _FE-CAN-QAM-16: - - ``FE_CAN_QAM_16`` - - - The frontend supports 16-QAM modulation - - - .. row 15 - - - .. _FE-CAN-QAM-32: - - ``FE_CAN_QAM_32`` - - - The frontend supports 32-QAM modulation - - - .. row 16 - - - .. _FE-CAN-QAM-64: - - ``FE_CAN_QAM_64`` - - - The frontend supports 64-QAM modulation - - - .. row 17 - - - .. _FE-CAN-QAM-128: - - ``FE_CAN_QAM_128`` - - - The frontend supports 128-QAM modulation - - - .. row 18 - - - .. _FE-CAN-QAM-256: - - ``FE_CAN_QAM_256`` - - - The frontend supports 256-QAM modulation - - - .. row 19 - - - .. _FE-CAN-QAM-AUTO: - - ``FE_CAN_QAM_AUTO`` - - - The frontend can autodetect modulation - - - .. row 20 - - - .. _FE-CAN-TRANSMISSION-MODE-AUTO: - - ``FE_CAN_TRANSMISSION_MODE_AUTO`` - - - The frontend can autodetect the transmission mode - - - .. row 21 - - - .. _FE-CAN-BANDWIDTH-AUTO: - - ``FE_CAN_BANDWIDTH_AUTO`` - - - The frontend can autodetect the bandwidth - - - .. row 22 - - - .. _FE-CAN-GUARD-INTERVAL-AUTO: - - ``FE_CAN_GUARD_INTERVAL_AUTO`` - - - The frontend can autodetect the guard interval - - - .. row 23 - - - .. _FE-CAN-HIERARCHY-AUTO: - - ``FE_CAN_HIERARCHY_AUTO`` - - - The frontend can autodetect hierarch - - - .. row 24 - - - .. _FE-CAN-8VSB: - - ``FE_CAN_8VSB`` - - - The frontend supports 8-VSB modulation - - - .. row 25 - - - .. _FE-CAN-16VSB: - - ``FE_CAN_16VSB`` - - - The frontend supports 16-VSB modulation - - - .. row 26 - - - .. _FE-HAS-EXTENDED-CAPS: - - ``FE_HAS_EXTENDED_CAPS`` - - - Currently, unused - - - .. row 27 - - - .. _FE-CAN-MULTISTREAM: - - ``FE_CAN_MULTISTREAM`` - - - The frontend supports multistream filtering - - - .. row 28 - - - .. _FE-CAN-TURBO-FEC: - - ``FE_CAN_TURBO_FEC`` - - - The frontend supports turbo FEC modulation - - - .. row 29 - - - .. _FE-CAN-2G-MODULATION: - - ``FE_CAN_2G_MODULATION`` - - - The frontend supports "2nd generation modulation" (DVB-S2/T2)> - - - .. row 30 - - - .. _FE-NEEDS-BENDING: - - ``FE_NEEDS_BENDING`` - - - Not supported anymore, don't use it - - - .. row 31 - - - .. _FE-CAN-RECOVER: - - ``FE_CAN_RECOVER`` - - - The frontend can recover from a cable unplug automatically - - - .. row 32 - - - .. _FE-CAN-MUTE-TS: - - ``FE_CAN_MUTE_TS`` - - - The frontend can stop spurious TS data output +The frontend capabilities are described at :c:type:`fe_caps`. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst index 015d4db597b5..948d2ba84f2c 100644 --- a/Documentation/media/uapi/dvb/fe-get-property.rst +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -29,13 +29,13 @@ Arguments File descriptor returned by :ref:`open() <frontend_f_open>`. ``argp`` - pointer to struct :c:type:`dtv_properties` + Pointer to struct :c:type:`dtv_properties`. Description =========== -All DVB frontend devices support the ``FE_SET_PROPERTY`` and +All Digital TV frontend devices support the ``FE_SET_PROPERTY`` and ``FE_GET_PROPERTY`` ioctls. The supported properties and statistics depends on the delivery system and on the device: @@ -64,6 +64,10 @@ depends on the delivery system and on the device: Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-ber.rst b/Documentation/media/uapi/dvb/fe-read-ber.rst index e54972ad5250..1e6a79567a4c 100644 --- a/Documentation/media/uapi/dvb/fe-read-ber.rst +++ b/Documentation/media/uapi/dvb/fe-read-ber.rst @@ -41,6 +41,10 @@ access to the device is sufficient. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst index 4b13c4757744..198f6dfb53a1 100644 --- a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst +++ b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst @@ -41,6 +41,10 @@ to the device is sufficient. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-snr.rst b/Documentation/media/uapi/dvb/fe-read-snr.rst index 2aed487f5c99..6db22c043512 100644 --- a/Documentation/media/uapi/dvb/fe-read-snr.rst +++ b/Documentation/media/uapi/dvb/fe-read-snr.rst @@ -41,6 +41,10 @@ to the device is sufficient. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst index 812f086c20f5..4adb52f084ff 100644 --- a/Documentation/media/uapi/dvb/fe-read-status.rst +++ b/Documentation/media/uapi/dvb/fe-read-status.rst @@ -33,7 +33,7 @@ Arguments Description =========== -All DVB frontend devices support the ``FE_READ_STATUS`` ioctl. It is +All Digital TV frontend devices support the ``FE_READ_STATUS`` ioctl. It is used to check about the locking status of the frontend after being tuned. The ioctl takes a pointer to an integer where the status will be written. @@ -52,85 +52,14 @@ The fe_status parameter is used to indicate the current state and/or state changes of the frontend hardware. It is produced using the enum :c:type:`fe_status` values on a bitmask -.. c:type:: fe_status - -.. tabularcolumns:: |p{3.5cm}|p{14.0cm}| - -.. _fe-status: - -.. flat-table:: enum fe_status - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _FE-HAS-SIGNAL: - - ``FE_HAS_SIGNAL`` - - - The frontend has found something above the noise level - - - .. row 3 - - - .. _FE-HAS-CARRIER: - - ``FE_HAS_CARRIER`` - - - The frontend has found a DVB signal - - - .. row 4 - - - .. _FE-HAS-VITERBI: - - ``FE_HAS_VITERBI`` - - - The frontend FEC inner coding (Viterbi, LDPC or other inner code) - is stable - - - .. row 5 - - - .. _FE-HAS-SYNC: - - ``FE_HAS_SYNC`` - - - Synchronization bytes was found - - - .. row 6 - - - .. _FE-HAS-LOCK: - - ``FE_HAS_LOCK`` - - - The DVB were locked and everything is working - - - .. row 7 - - - .. _FE-TIMEDOUT: - - ``FE_TIMEDOUT`` - - - no lock within the last about 2 seconds - - - .. row 8 - - - .. _FE-REINIT: - - ``FE_REINIT`` - - - The frontend was reinitialized, application is recommended to - reset DiSEqC, tone and parameters - Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst index 46687c123402..f2c688bcacb3 100644 --- a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst +++ b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst @@ -43,6 +43,10 @@ sufficient. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst index 1d5878da2f41..3c4bc179b313 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst @@ -30,7 +30,7 @@ Arguments - 0 - normal tune mode - - FE_TUNE_MODE_ONESHOT - When set, this flag will disable any + - ``FE_TUNE_MODE_ONESHOT`` - When set, this flag will disable any zigzagging or other "normal" tuning behaviour. Additionally, there will be no automatic monitoring of the lock status, and hence no frontend events will be generated. If a frontend device @@ -42,12 +42,16 @@ Description =========== Allow setting tuner mode flags to the frontend, between 0 (normal) or -FE_TUNE_MODE_ONESHOT mode +``FE_TUNE_MODE_ONESHOT`` mode Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-frontend.rst b/Documentation/media/uapi/dvb/fe-set-frontend.rst index 7f97dce9aee6..4f3dcf338254 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend.rst @@ -48,17 +48,24 @@ requires read/write access to the device. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| .. flat-table:: :header-rows: 0 :stub-columns: 0 - + :widths: 1 16 - .. row 1 - ``EINVAL`` - Maximum supported symbol rate reached. + + +Generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst index 84e4da3fd4c9..758efa11014c 100644 --- a/Documentation/media/uapi/dvb/fe-set-tone.rst +++ b/Documentation/media/uapi/dvb/fe-set-tone.rst @@ -45,40 +45,14 @@ this is done using the DiSEqC ioctls. capability of selecting the band. So, it is recommended that applications would change to SEC_TONE_OFF when the device is not used. -.. c:type:: fe_sec_tone_mode - -.. flat-table:: enum fe_sec_tone_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SEC-TONE-ON: - - ``SEC_TONE_ON`` - - - Sends a 22kHz tone burst to the antenna - - - .. row 3 - - - .. _SEC-TONE-OFF: - - ``SEC_TONE_OFF`` - - - Don't send a 22kHz tone to the antenna (except if the - FE_DISEQC_* ioctls are called) - Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-voltage.rst b/Documentation/media/uapi/dvb/fe-set-voltage.rst index 052f316bb4a3..38d4485290a0 100644 --- a/Documentation/media/uapi/dvb/fe-set-voltage.rst +++ b/Documentation/media/uapi/dvb/fe-set-voltage.rst @@ -53,6 +53,10 @@ power up the LNBf. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-type-t.rst b/Documentation/media/uapi/dvb/fe-type-t.rst index 548b965188d0..dee32ae104d7 100644 --- a/Documentation/media/uapi/dvb/fe-type-t.rst +++ b/Documentation/media/uapi/dvb/fe-type-t.rst @@ -78,7 +78,7 @@ parameter. In the old days, struct :c:type:`dvb_frontend_info` used to contain ``fe_type_t`` field to indicate the delivery systems, -filled with either FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC. While this +filled with either ``FE_QPSK, FE_QAM, FE_OFDM`` or ``FE_ATSC``. While this is still filled to keep backward compatibility, the usage of this field is deprecated, as it can report just one delivery system, but some devices support multiple delivery systems. Please use diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst index 7bb7559c4500..6eef507fea50 100644 --- a/Documentation/media/uapi/dvb/fe_property_parameters.rst +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -6,6 +6,11 @@ Digital TV property parameters ****************************** +There are several different Digital TV parameters that can be used by +:ref:`FE_SET_PROPERTY and FE_GET_PROPERTY ioctls<FE_GET_PROPERTY>`. +This section describes each of them. Please notice, however, that only +a subset of them are needed to setup a frontend. + .. _DTV-UNDEFINED: @@ -67,144 +72,36 @@ DTV_MODULATION ============== Specifies the frontend modulation type for delivery systems that -supports more than one modulation type. The modulation can be one of the -types defined by enum :c:type:`fe_modulation`. - - -.. c:type:: fe_modulation - -Modulation property -------------------- - -Most of the digital TV standards currently offers more than one possible -modulation (sometimes called as "constellation" on some standards). This -enum contains the values used by the Kernel. Please note that not all -modulations are supported by a given standard. - - -.. flat-table:: enum fe_modulation - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _QPSK: - - ``QPSK`` - - - QPSK modulation - - - .. row 3 - - - .. _QAM-16: - - ``QAM_16`` - - - 16-QAM modulation - - - .. row 4 - - - .. _QAM-32: - - ``QAM_32`` - - - 32-QAM modulation - - - .. row 5 - - - .. _QAM-64: - - ``QAM_64`` - - - 64-QAM modulation - - - .. row 6 - - - .. _QAM-128: - - ``QAM_128`` - - - 128-QAM modulation - - - .. row 7 - - - .. _QAM-256: - - ``QAM_256`` - - - 256-QAM modulation - - - .. row 8 - - - .. _QAM-AUTO: +supports more multiple modulations. + +The modulation can be one of the types defined by enum :c:type:`fe_modulation`. + +Most of the digital TV standards offers more than one possible +modulation type. + +The table below presents a summary of the types of modulation types +supported by each delivery system, as currently defined by specs. + +======================= ======================================================= +Standard Modulation types +======================= ======================================================= +ATSC (version 1) 8-VSB and 16-VSB. +DMTB 4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR. +DVB-C Annex A/C 16-QAM, 32-QAM, 64-QAM and 256-QAM. +DVB-C Annex B 64-QAM. +DVB-T QPSK, 16-QAM and 64-QAM. +DVB-T2 QPSK, 16-QAM, 64-QAM and 256-QAM. +DVB-S No need to set. It supports only QPSK. +DVB-S2 QPSK, 8-PSK, 16-APSK and 32-APSK. +ISDB-T QPSK, DQPSK, 16-QAM and 64-QAM. +ISDB-S 8-PSK, QPSK and BPSK. +======================= ======================================================= - ``QAM_AUTO`` - - - Autodetect QAM modulation - - - .. row 9 - - - .. _VSB-8: - - ``VSB_8`` - - - 8-VSB modulation - - - .. row 10 - - - .. _VSB-16: - - ``VSB_16`` - - - 16-VSB modulation - - - .. row 11 - - - .. _PSK-8: - - ``PSK_8`` - - - 8-PSK modulation - - - .. row 12 - - - .. _APSK-16: - - ``APSK_16`` - - - 16-APSK modulation - - - .. row 13 - - - .. _APSK-32: - - ``APSK_32`` - - - 32-APSK modulation - - - .. row 14 - - - .. _DQPSK: - - ``DQPSK`` - - - DQPSK modulation - - - .. row 15 - - - .. _QAM-4-NR: - - ``QAM_4_NR`` - - - 4-QAM-NR modulation +.. note:: + Please notice that some of the above modulation types may not be + defined currently at the Kernel. The reason is simple: no driver + needed such definition yet. .. _DTV-BANDWIDTH-HZ: @@ -214,32 +111,42 @@ DTV_BANDWIDTH_HZ Bandwidth for the channel, in HZ. +Should be set only for terrestrial delivery systems. + Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, ``8000000``, ``10000000``. -.. note:: +======================= ======================================================= +Terrestrial Standard Possible values for bandwidth +======================= ======================================================= +ATSC (version 1) No need to set. It is always 6MHz. +DMTB No need to set. It is always 8MHz. +DVB-T 6MHz, 7MHz and 8MHz. +DVB-T2 1.172 MHz, 5MHz, 6MHz, 7MHz, 8MHz and 10MHz +ISDB-T 5MHz, 6MHz, 7MHz and 8MHz, although most places + use 6MHz. +======================= ======================================================= - #. DVB-T supports 6, 7 and 8MHz. - #. DVB-T2 supports 1.172, 5, 6, 7, 8 and 10MHz. +.. note:: - #. ISDB-T supports 5MHz, 6MHz, 7MHz and 8MHz, although most - places use 6MHz. - #. On DVB-C and DVB-S/S2, the bandwidth depends on the symbol rate. - So, the Kernel will silently ignore setting :ref:`DTV-BANDWIDTH-HZ`. + #. For ISDB-Tsb, the bandwidth can vary depending on the number of + connected segments. - #. For DVB-C and DVB-S/S2, the Kernel will return an estimation of the - bandwidth, calculated from :ref:`DTV-SYMBOL-RATE` and from - the rolloff, with is fixed for DVB-C and DVB-S. + It can be easily derived from other parameters + (DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT). - #. For DVB-S2, the bandwidth estimation will use :ref:`DTV-ROLLOFF`. + #. On Satellite and Cable delivery systems, the bandwidth depends on + the symbol rate. So, the Kernel will silently ignore any setting + :ref:`DTV-BANDWIDTH-HZ`. I will however fill it back with a + bandwidth estimation. - #. For ISDB-Tsb, it can vary depending on the number of connected - segments. + Such bandwidth estimation takes into account the symbol rate set with + :ref:`DTV-SYMBOL-RATE`, and the rolloff factor, with is fixed for + DVB-C and DVB-S. - #. Bandwidth in ISDB-Tsb can be easily derived from other parameters - (DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT). + For DVB-S2, the rolloff should also be set via :ref:`DTV-ROLLOFF`. .. _DTV-INVERSION: @@ -249,53 +156,7 @@ DTV_INVERSION Specifies if the frontend should do spectral inversion or not. -.. c:type:: fe_spectral_inversion - -enum fe_modulation: Frontend spectral inversion ------------------------------------------------ - -This parameter indicates if spectral inversion should be presumed or -not. In the automatic setting (``INVERSION_AUTO``) the hardware will try -to figure out the correct setting by itself. If the hardware doesn't -support, the DVB core will try to lock at the carrier first with -inversion off. If it fails, it will try to enable inversion. - - -.. flat-table:: enum fe_modulation - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _INVERSION-OFF: - - ``INVERSION_OFF`` - - - Don't do spectral band inversion. - - - .. row 3 - - - .. _INVERSION-ON: - - ``INVERSION_ON`` - - - Do spectral band inversion. - - - .. row 4 - - - .. _INVERSION-AUTO: - - ``INVERSION_AUTO`` - - - Autodetect spectral band inversion. - +The acceptable values are defined by :c:type:`fe_spectral_inversion`. .. _DTV-DISEQC-MASTER: @@ -311,8 +172,9 @@ Currently not implemented. DTV_SYMBOL_RATE =============== -Digital TV symbol rate, in bauds (symbols/second). Used on cable -standards. +Used on cable and satellite delivery systems. + +Digital TV symbol rate, in bauds (symbols/second). .. _DTV-INNER-FEC: @@ -320,128 +182,9 @@ standards. DTV_INNER_FEC ============= -Used cable/satellite transmissions. The acceptable values are: - -.. c:type:: fe_code_rate - -enum fe_code_rate: type of the Forward Error Correction. --------------------------------------------------------- - -.. flat-table:: enum fe_code_rate - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _FEC-NONE: - - ``FEC_NONE`` - - - No Forward Error Correction Code - - - .. row 3 - - - .. _FEC-AUTO: - - ``FEC_AUTO`` - - - Autodetect Error Correction Code - - - .. row 4 - - - .. _FEC-1-2: - - ``FEC_1_2`` - - - Forward Error Correction Code 1/2 - - - .. row 5 - - - .. _FEC-2-3: - - ``FEC_2_3`` - - - Forward Error Correction Code 2/3 - - - .. row 6 - - - .. _FEC-3-4: - - ``FEC_3_4`` - - - Forward Error Correction Code 3/4 - - - .. row 7 - - - .. _FEC-4-5: - - ``FEC_4_5`` - - - Forward Error Correction Code 4/5 - - - .. row 8 - - - .. _FEC-5-6: - - ``FEC_5_6`` - - - Forward Error Correction Code 5/6 - - - .. row 9 - - - .. _FEC-6-7: - - ``FEC_6_7`` - - - Forward Error Correction Code 6/7 - - - .. row 10 - - - .. _FEC-7-8: - - ``FEC_7_8`` - - - Forward Error Correction Code 7/8 - - - .. row 11 - - - .. _FEC-8-9: - - ``FEC_8_9`` - - - Forward Error Correction Code 8/9 - - - .. row 12 - - - .. _FEC-9-10: - - ``FEC_9_10`` - - - Forward Error Correction Code 9/10 - - - .. row 13 - - - .. _FEC-2-5: - - ``FEC_2_5`` - - - Forward Error Correction Code 2/5 - - - .. row 14 - - - .. _FEC-3-5: - - ``FEC_3_5`` - - - Forward Error Correction Code 3/5 +Used on cable and satellite delivery systems. +The acceptable values are defined by :c:type:`fe_code_rate`. .. _DTV-VOLTAGE: @@ -449,49 +192,14 @@ enum fe_code_rate: type of the Forward Error Correction. DTV_VOLTAGE =========== +Used on satellite delivery systems. + The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation (horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched consistently to the DiSEqC commands as described in the DiSEqC spec. - -.. c:type:: fe_sec_voltage - -.. flat-table:: enum fe_sec_voltage - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SEC-VOLTAGE-13: - - ``SEC_VOLTAGE_13`` - - - Set DC voltage level to 13V - - - .. row 3 - - - .. _SEC-VOLTAGE-18: - - ``SEC_VOLTAGE_18`` - - - Set DC voltage level to 18V - - - .. row 4 - - - .. _SEC-VOLTAGE-OFF: - - ``SEC_VOLTAGE_OFF`` - - - Don't send any voltage to the antenna - +The acceptable values are defined by :c:type:`fe_sec_voltage`. .. _DTV-TONE: @@ -507,50 +215,11 @@ Currently not used. DTV_PILOT ========= -Sets DVB-S2 pilot - - -.. c:type:: fe_pilot - -fe_pilot type -------------- - - -.. flat-table:: enum fe_pilot - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _PILOT-ON: - - ``PILOT_ON`` - - - Pilot tones enabled - - - .. row 3 - - - .. _PILOT-OFF: - - ``PILOT_OFF`` +Used on DVB-S2. - - Pilot tones disabled - - - .. row 4 - - - .. _PILOT-AUTO: - - ``PILOT_AUTO`` - - - Autodetect pilot tones +Sets DVB-S2 pilot. +The acceptable values are defined by :c:type:`fe_pilot`. .. _DTV-ROLLOFF: @@ -558,58 +227,11 @@ fe_pilot type DTV_ROLLOFF =========== -Sets DVB-S2 rolloff - - -.. c:type:: fe_rolloff - -fe_rolloff type ---------------- - - -.. flat-table:: enum fe_rolloff - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ROLLOFF-35: - - ``ROLLOFF_35`` +Used on DVB-S2. - - Roloff factor: α=35% - - - .. row 3 - - - .. _ROLLOFF-20: - - ``ROLLOFF_20`` - - - Roloff factor: α=20% - - - .. row 4 - - - .. _ROLLOFF-25: - - ``ROLLOFF_25`` - - - Roloff factor: α=25% - - - .. row 5 - - - .. _ROLLOFF-AUTO: - - ``ROLLOFF_AUTO`` - - - Auto-detect the roloff factor. +Sets DVB-S2 rolloff. +The acceptable values are defined by :c:type:`fe_rolloff`. .. _DTV-DISEQC-SLAVE-REPLY: @@ -641,180 +263,9 @@ Currently not implemented. DTV_DELIVERY_SYSTEM =================== -Specifies the type of Delivery system - - -.. c:type:: fe_delivery_system - -fe_delivery_system type ------------------------ - -Possible values: - - -.. flat-table:: enum fe_delivery_system - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SYS-UNDEFINED: - - ``SYS_UNDEFINED`` - - - Undefined standard. Generally, indicates an error - - - .. row 3 - - - .. _SYS-DVBC-ANNEX-A: - - ``SYS_DVBC_ANNEX_A`` - - - Cable TV: DVB-C following ITU-T J.83 Annex A spec - - - .. row 4 - - - .. _SYS-DVBC-ANNEX-B: - - ``SYS_DVBC_ANNEX_B`` - - - Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) - - - .. row 5 - - - .. _SYS-DVBC-ANNEX-C: - - ``SYS_DVBC_ANNEX_C`` - - - Cable TV: DVB-C following ITU-T J.83 Annex C spec - - - .. row 6 - - - .. _SYS-ISDBC: - - ``SYS_ISDBC`` - - - Cable TV: ISDB-C (no drivers yet) - - - .. row 7 - - - .. _SYS-DVBT: - - ``SYS_DVBT`` - - - Terrestral TV: DVB-T - - - .. row 8 - - - .. _SYS-DVBT2: - - ``SYS_DVBT2`` - - - Terrestral TV: DVB-T2 - - - .. row 9 - - - .. _SYS-ISDBT: - - ``SYS_ISDBT`` - - - Terrestral TV: ISDB-T - - - .. row 10 - - - .. _SYS-ATSC: - - ``SYS_ATSC`` - - - Terrestral TV: ATSC - - - .. row 11 - - - .. _SYS-ATSCMH: - - ``SYS_ATSCMH`` - - - Terrestral TV (mobile): ATSC-M/H - - - .. row 12 - - - .. _SYS-DTMB: - - ``SYS_DTMB`` - - - Terrestrial TV: DTMB - - - .. row 13 - - - .. _SYS-DVBS: - - ``SYS_DVBS`` - - - Satellite TV: DVB-S - - - .. row 14 - - - .. _SYS-DVBS2: - - ``SYS_DVBS2`` - - - Satellite TV: DVB-S2 - - - .. row 15 - - - .. _SYS-TURBO: - - ``SYS_TURBO`` - - - Satellite TV: DVB-S Turbo - - - .. row 16 - - - .. _SYS-ISDBS: - - ``SYS_ISDBS`` - - - Satellite TV: ISDB-S - - - .. row 17 - - - .. _SYS-DAB: - - ``SYS_DAB`` - - - Digital audio: DAB (not fully supported) - - - .. row 18 - - - .. _SYS-DSS: - - ``SYS_DSS`` - - - Satellite TV:"DSS (not fully supported) - - - .. row 19 - - - .. _SYS-CMMB: - - ``SYS_CMMB`` - - - Terrestral TV (mobile):CMMB (not fully supported) - - - .. row 20 - - - .. _SYS-DVBH: - - ``SYS_DVBH`` - - - Terrestral TV (mobile): DVB-H (standard deprecated) +Specifies the type of the delivery system. +The acceptable values are defined by :c:type:`fe_delivery_system`. .. _DTV-ISDBT-PARTIAL-RECEPTION: @@ -822,6 +273,8 @@ Possible values: DTV_ISDBT_PARTIAL_RECEPTION =========================== +Used only on ISDB. + If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents whether the channel is in partial reception mode or not. @@ -840,6 +293,8 @@ Possible values: 0, 1, -1 (AUTO) DTV_ISDBT_SOUND_BROADCASTING ============================ +Used only on ISDB. + This field represents whether the other DTV_ISDBT_*-parameters are referring to an ISDB-T and an ISDB-Tsb channel. (See also ``DTV_ISDBT_PARTIAL_RECEPTION``). @@ -852,6 +307,8 @@ Possible values: 0, 1, -1 (AUTO) DTV_ISDBT_SB_SUBCHANNEL_ID ========================== +Used only on ISDB. + This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. (Note of the author: This might not be the correct description of the @@ -887,6 +344,8 @@ Possible values: 0 .. 41, -1 (AUTO) DTV_ISDBT_SB_SEGMENT_IDX ======================== +Used only on ISDB. + This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. ``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be @@ -903,6 +362,8 @@ Note: This value cannot be determined by an automatic channel search. DTV_ISDBT_SB_SEGMENT_COUNT ========================== +Used only on ISDB. + This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. ``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected @@ -918,6 +379,8 @@ Note: This value cannot be determined by an automatic channel search. DTV-ISDBT-LAYER[A-C] parameters =============================== +Used only on ISDB. + ISDB-T channels can be coded hierarchically. As opposed to DVB-T in ISDB-T hierarchical layers can be decoded simultaneously. For that reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. @@ -934,6 +397,8 @@ There are 3 parameter sets, for Layers A, B and C. DTV_ISDBT_LAYER_ENABLED ----------------------- +Used only on ISDB. + Hierarchical reception in ISDB-T is achieved by enabling or disabling layers in the decoding process. Setting all bits of ``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to @@ -964,7 +429,13 @@ Only the values of the first 3 bits are used. Other bits will be silently ignore DTV_ISDBT_LAYER[A-C]_FEC ------------------------ -Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, +Used only on ISDB. + +The Forward Error Correction mechanism used by a given ISDB Layer, as +defined by :c:type:`fe_code_rate`. + + +Possible values are: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, ``FEC_5_6``, ``FEC_7_8`` @@ -973,11 +444,19 @@ Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, DTV_ISDBT_LAYER[A-C]_MODULATION ------------------------------- -Possible values: ``QAM_AUTO``, QP\ ``SK, QAM_16``, ``QAM_64``, ``DQPSK`` +Used only on ISDB. + +The modulation used by a given ISDB Layer, as defined by +:c:type:`fe_modulation`. -Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is -``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ =0 layer has to be -``DQPSK``. +Possible values are: ``QAM_AUTO``, ``QPSK``, ``QAM_16``, ``QAM_64``, ``DQPSK`` + +.. note:: + + #. If layer C is ``DQPSK``, then layer B has to be ``DQPSK``. + + #. If layer B is ``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ = 0, + then layer has to be ``DQPSK``. .. _DTV-ISDBT-LAYER-SEGMENT-COUNT: @@ -985,6 +464,8 @@ Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT ---------------------------------- +Used only on ISDB. + Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and @@ -993,15 +474,15 @@ Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and .. _isdbt-layer_seg-cnt-table: .. flat-table:: Truth table for ISDB-T Sound Broadcasting - :header-rows: 0 + :header-rows: 1 :stub-columns: 0 - .. row 1 - - PR + - Partial Reception - - SB + - Sound Broadcasting - Layer A width @@ -1074,6 +555,8 @@ Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING -------------------------------------- +Used only on ISDB. + Valid values: 0, 1, 2, 4, -1 (AUTO) when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. @@ -1086,7 +569,7 @@ TMCC-structure, as shown in the table below. .. c:type:: isdbt_layer_interleaving_table .. flat-table:: ISDB-T time interleaving modes - :header-rows: 0 + :header-rows: 1 :stub-columns: 0 @@ -1147,6 +630,8 @@ TMCC-structure, as shown in the table below. DTV_ATSCMH_FIC_VER ------------------ +Used only on ATSC-MH. + Version number of the FIC (Fast Information Channel) signaling data. FIC is used for relaying information to allow rapid service acquisition @@ -1160,6 +645,8 @@ Possible values: 0, 1, 2, 3, ..., 30, 31 DTV_ATSCMH_PARADE_ID -------------------- +Used only on ATSC-MH. + Parade identification number A parade is a collection of up to eight MH groups, conveying one or two @@ -1173,6 +660,8 @@ Possible values: 0, 1, 2, 3, ..., 126, 127 DTV_ATSCMH_NOG -------------- +Used only on ATSC-MH. + Number of MH groups per MH subframe for a designated parade. Possible values: 1, 2, 3, 4, 5, 6, 7, 8 @@ -1183,6 +672,8 @@ Possible values: 1, 2, 3, 4, 5, 6, 7, 8 DTV_ATSCMH_TNOG --------------- +Used only on ATSC-MH. + Total number of MH groups including all MH groups belonging to all MH parades in one MH subframe. @@ -1194,6 +685,8 @@ Possible values: 0, 1, 2, 3, ..., 30, 31 DTV_ATSCMH_SGN -------------- +Used only on ATSC-MH. + Start group number. Possible values: 0, 1, 2, 3, ..., 14, 15 @@ -1204,6 +697,8 @@ Possible values: 0, 1, 2, 3, ..., 14, 15 DTV_ATSCMH_PRC -------------- +Used only on ATSC-MH. + Parade repetition cycle. Possible values: 1, 2, 3, 4, 5, 6, 7, 8 @@ -1214,44 +709,11 @@ Possible values: 1, 2, 3, 4, 5, 6, 7, 8 DTV_ATSCMH_RS_FRAME_MODE ------------------------ -Reed Solomon (RS) frame mode. - -Possible values are: - -.. tabularcolumns:: |p{5.0cm}|p{12.5cm}| - -.. c:type:: atscmh_rs_frame_mode - -.. flat-table:: enum atscmh_rs_frame_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-RSFRAME-PRI-ONLY: - - ``ATSCMH_RSFRAME_PRI_ONLY`` - - - Single Frame: There is only a primary RS Frame for all Group - Regions. - - - .. row 3 - - - .. _ATSCMH-RSFRAME-PRI-SEC: - - ``ATSCMH_RSFRAME_PRI_SEC`` +Used only on ATSC-MH. - - Dual Frame: There are two separate RS Frames: Primary RS Frame for - Group Region A and B and Secondary RS Frame for Group Region C and - D. +Reed Solomon (RS) frame mode. +The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`. .. _DTV-ATSCMH-RS-FRAME-ENSEMBLE: @@ -1259,48 +721,11 @@ Possible values are: DTV_ATSCMH_RS_FRAME_ENSEMBLE ---------------------------- -Reed Solomon(RS) frame ensemble. - -Possible values are: - - -.. c:type:: atscmh_rs_frame_ensemble - -.. flat-table:: enum atscmh_rs_frame_ensemble - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-RSFRAME-ENS-PRI: - - ``ATSCMH_RSFRAME_ENS_PRI`` - - - Primary Ensemble. - - - .. row 3 - - - .. _ATSCMH-RSFRAME-ENS-SEC: - - ``AATSCMH_RSFRAME_PRI_SEC`` - - - Secondary Ensemble. - - - .. row 4 - - - .. _ATSCMH-RSFRAME-RES: +Used only on ATSC-MH. - ``AATSCMH_RSFRAME_RES`` - - - Reserved. Shouldn't be used. +Reed Solomon(RS) frame ensemble. +The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`. .. _DTV-ATSCMH-RS-CODE-MODE-PRI: @@ -1308,56 +733,11 @@ Possible values are: DTV_ATSCMH_RS_CODE_MODE_PRI --------------------------- -Reed Solomon (RS) code mode (primary). - -Possible values are: - - -.. c:type:: atscmh_rs_code_mode - -.. flat-table:: enum atscmh_rs_code_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-RSCODE-211-187: - - ``ATSCMH_RSCODE_211_187`` - - - Reed Solomon code (211,187). - - - .. row 3 - - - .. _ATSCMH-RSCODE-223-187: - - ``ATSCMH_RSCODE_223_187`` - - - Reed Solomon code (223,187). - - - .. row 4 - - - .. _ATSCMH-RSCODE-235-187: +Used only on ATSC-MH. - ``ATSCMH_RSCODE_235_187`` - - - Reed Solomon code (235,187). - - - .. row 5 - - - .. _ATSCMH-RSCODE-RES: - - ``ATSCMH_RSCODE_RES`` - - - Reserved. Shouldn't be used. +Reed Solomon (RS) code mode (primary). +The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. .. _DTV-ATSCMH-RS-CODE-MODE-SEC: @@ -1365,10 +745,11 @@ Possible values are: DTV_ATSCMH_RS_CODE_MODE_SEC --------------------------- +Used only on ATSC-MH. + Reed Solomon (RS) code mode (secondary). -Possible values are the same as documented on enum -:c:type:`atscmh_rs_code_mode`: +The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. .. _DTV-ATSCMH-SCCC-BLOCK-MODE: @@ -1376,51 +757,11 @@ Possible values are the same as documented on enum DTV_ATSCMH_SCCC_BLOCK_MODE -------------------------- -Series Concatenated Convolutional Code Block Mode. - -Possible values are: - -.. tabularcolumns:: |p{4.5cm}|p{13.0cm}| - -.. c:type:: atscmh_sccc_block_mode - -.. flat-table:: enum atscmh_scc_block_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-SCCC-BLK-SEP: - - ``ATSCMH_SCCC_BLK_SEP`` - - - Separate SCCC: the SCCC outer code mode shall be set independently - for each Group Region (A, B, C, D) - - - .. row 3 - - - .. _ATSCMH-SCCC-BLK-COMB: - - ``ATSCMH_SCCC_BLK_COMB`` - - - Combined SCCC: all four Regions shall have the same SCCC outer - code mode. - - - .. row 4 - - - .. _ATSCMH-SCCC-BLK-RES: - - ``ATSCMH_SCCC_BLK_RES`` +Used only on ATSC-MH. - - Reserved. Shouldn't be used. +Series Concatenated Convolutional Code Block Mode. +The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`. .. _DTV-ATSCMH-SCCC-CODE-MODE-A: @@ -1428,55 +769,19 @@ Possible values are: DTV_ATSCMH_SCCC_CODE_MODE_A --------------------------- -Series Concatenated Convolutional Code Rate. - -Possible values are: - - -.. c:type:: atscmh_sccc_code_mode - -.. flat-table:: enum atscmh_sccc_code_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-SCCC-CODE-HLF: - - ``ATSCMH_SCCC_CODE_HLF`` - - - The outer code rate of a SCCC Block is 1/2 rate. - - - .. row 3 - - - .. _ATSCMH-SCCC-CODE-QTR: - - ``ATSCMH_SCCC_CODE_QTR`` - - - The outer code rate of a SCCC Block is 1/4 rate. - - - .. row 4 - - - .. _ATSCMH-SCCC-CODE-RES: - - ``ATSCMH_SCCC_CODE_RES`` - - - to be documented. +Used only on ATSC-MH. +Series Concatenated Convolutional Code Rate. +The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`. .. _DTV-ATSCMH-SCCC-CODE-MODE-B: DTV_ATSCMH_SCCC_CODE_MODE_B --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. Possible values are the same as documented on enum @@ -1488,6 +793,8 @@ Possible values are the same as documented on enum DTV_ATSCMH_SCCC_CODE_MODE_C --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. Possible values are the same as documented on enum @@ -1499,6 +806,8 @@ Possible values are the same as documented on enum DTV_ATSCMH_SCCC_CODE_MODE_D --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. Possible values are the same as documented on enum @@ -1510,7 +819,7 @@ Possible values are the same as documented on enum DTV_API_VERSION =============== -Returns the major/minor version of the DVB API +Returns the major/minor version of the Digital TV API .. _DTV-CODE-RATE-HP: @@ -1518,8 +827,9 @@ Returns the major/minor version of the DVB API DTV_CODE_RATE_HP ================ -Used on terrestrial transmissions. The acceptable values are the ones -described at :c:type:`fe_transmit_mode`. +Used on terrestrial transmissions. + +The acceptable values are defined by :c:type:`fe_transmit_mode`. .. _DTV-CODE-RATE-LP: @@ -1527,8 +837,9 @@ described at :c:type:`fe_transmit_mode`. DTV_CODE_RATE_LP ================ -Used on terrestrial transmissions. The acceptable values are the ones -described at :c:type:`fe_transmit_mode`. +Used on terrestrial transmissions. + +The acceptable values are defined by :c:type:`fe_transmit_mode`. .. _DTV-GUARD-INTERVAL: @@ -1536,242 +847,56 @@ described at :c:type:`fe_transmit_mode`. DTV_GUARD_INTERVAL ================== -Possible values are: - - -.. c:type:: fe_guard_interval - -Modulation guard interval -------------------------- - - -.. flat-table:: enum fe_guard_interval - :header-rows: 1 - :stub-columns: 0 - +The acceptable values are defined by :c:type:`fe_guard_interval`. - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _GUARD-INTERVAL-AUTO: - - ``GUARD_INTERVAL_AUTO`` - - - Autodetect the guard interval - - - .. row 3 - - - .. _GUARD-INTERVAL-1-128: - - ``GUARD_INTERVAL_1_128`` - - - Guard interval 1/128 - - - .. row 4 - - - .. _GUARD-INTERVAL-1-32: - - ``GUARD_INTERVAL_1_32`` - - - Guard interval 1/32 - - - .. row 5 - - - .. _GUARD-INTERVAL-1-16: - - ``GUARD_INTERVAL_1_16`` - - - Guard interval 1/16 - - - .. row 6 - - - .. _GUARD-INTERVAL-1-8: - - ``GUARD_INTERVAL_1_8`` - - - Guard interval 1/8 - - - .. row 7 - - - .. _GUARD-INTERVAL-1-4: - - ``GUARD_INTERVAL_1_4`` - - - Guard interval 1/4 - - - .. row 8 - - - .. _GUARD-INTERVAL-19-128: - - ``GUARD_INTERVAL_19_128`` - - - Guard interval 19/128 - - - .. row 9 - - - .. _GUARD-INTERVAL-19-256: - - ``GUARD_INTERVAL_19_256`` - - - Guard interval 19/256 - - - .. row 10 - - - .. _GUARD-INTERVAL-PN420: - - ``GUARD_INTERVAL_PN420`` - - - PN length 420 (1/4) - - - .. row 11 - - - .. _GUARD-INTERVAL-PN595: - - ``GUARD_INTERVAL_PN595`` - - - PN length 595 (1/6) - - - .. row 12 - - - .. _GUARD-INTERVAL-PN945: - - ``GUARD_INTERVAL_PN945`` - - - PN length 945 (1/9) - - -Notes: - -1) If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the -hardware will try to find the correct guard interval (if capable) and -will use TMCC to fill in the missing parameters. - -2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at -present - -3) DTMB specifies PN420, PN595 and PN945. +.. note:: + #. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the + hardware will try to find the correct guard interval (if capable) and + will use TMCC to fill in the missing parameters. + #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128`` + and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at + present. + #. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and + ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present. + On such standard, only those intervals and ``GUARD_INTERVAL_AUTO`` + are valid. .. _DTV-TRANSMISSION-MODE: DTV_TRANSMISSION_MODE ===================== -Specifies the number of carriers used by the standard. This is used only -on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB - - -.. c:type:: fe_transmit_mode - -enum fe_transmit_mode: Number of carriers per channel ------------------------------------------------------ - -.. tabularcolumns:: |p{5.0cm}|p{12.5cm}| - -.. flat-table:: enum fe_transmit_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _TRANSMISSION-MODE-AUTO: - - ``TRANSMISSION_MODE_AUTO`` - - - Autodetect transmission mode. The hardware will try to find the - correct FFT-size (if capable) to fill in the missing parameters. - - - .. row 3 - - - .. _TRANSMISSION-MODE-1K: - - ``TRANSMISSION_MODE_1K`` - - - Transmission mode 1K - - - .. row 4 - - - .. _TRANSMISSION-MODE-2K: - - ``TRANSMISSION_MODE_2K`` - - - Transmission mode 2K - - - .. row 5 - - - .. _TRANSMISSION-MODE-8K: - - ``TRANSMISSION_MODE_8K`` - - Transmission mode 8K +Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB. - - .. row 6 +Specifies the FFT size (with corresponds to the approximate number of +carriers) used by the standard. - - .. _TRANSMISSION-MODE-4K: - - ``TRANSMISSION_MODE_4K`` - - - Transmission mode 4K - - - .. row 7 - - - .. _TRANSMISSION-MODE-16K: - - ``TRANSMISSION_MODE_16K`` - - - Transmission mode 16K - - - .. row 8 - - - .. _TRANSMISSION-MODE-32K: - - ``TRANSMISSION_MODE_32K`` - - - Transmission mode 32K - - - .. row 9 - - - .. _TRANSMISSION-MODE-C1: - - ``TRANSMISSION_MODE_C1`` - - - Single Carrier (C=1) transmission mode (DTMB) - - - .. row 10 - - - .. _TRANSMISSION-MODE-C3780: - - ``TRANSMISSION_MODE_C3780`` - - - Multi Carrier (C=3780) transmission mode (DTMB) +The acceptable values are defined by :c:type:`fe_transmit_mode`. +.. note:: -Notes: + #. ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called + **mode** on such standard, and are numbered from 1 to 3: -1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called -'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K + ==== ======== ======================== + Mode FFT size Transmission mode + ==== ======== ======================== + 1 2K ``TRANSMISSION_MODE_2K`` + 2 4K ``TRANSMISSION_MODE_4K`` + 3 8K ``TRANSMISSION_MODE_8K`` + ==== ======== ======================== -2) If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO`` -the hardware will try to find the correct FFT-size (if capable) and will -use TMCC to fill in the missing parameters. + #. If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO`` + the hardware will try to find the correct FFT-size (if capable) and + will use TMCC to fill in the missing parameters. -3) DVB-T specifies 2K and 8K as valid sizes. + #. DVB-T specifies 2K and 8K as valid sizes. -4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + #. DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. -5) DTMB specifies C1 and C3780. + #. DTMB specifies C1 and C3780. .. _DTV-HIERARCHY: @@ -1779,66 +904,11 @@ use TMCC to fill in the missing parameters. DTV_HIERARCHY ============= -Frontend hierarchy - - -.. c:type:: fe_hierarchy - -Frontend hierarchy ------------------- - - -.. flat-table:: enum fe_hierarchy - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _HIERARCHY-NONE: - - ``HIERARCHY_NONE`` - - - No hierarchy - - - .. row 3 - - - .. _HIERARCHY-AUTO: - - ``HIERARCHY_AUTO`` - - - Autodetect hierarchy (if supported) - - - .. row 4 +Used only on DVB-T and DVB-T2. - - .. _HIERARCHY-1: - - ``HIERARCHY_1`` - - - Hierarchy 1 - - - .. row 5 - - - .. _HIERARCHY-2: - - ``HIERARCHY_2`` - - - Hierarchy 2 - - - .. row 6 - - - .. _HIERARCHY-4: - - ``HIERARCHY_4`` - - - Hierarchy 4 +Frontend hierarchy. +The acceptable values are defined by :c:type:`fe_hierarchy`. .. _DTV-STREAM-ID: @@ -1846,8 +916,10 @@ Frontend hierarchy DTV_STREAM_ID ============= +Used on DVB-S2, DVB-T2 and ISDB-S. + DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on -a single transport stream. This property enables the DVB driver to +a single transport stream. This property enables the digital TV driver to handle substream filtering, when supported by the hardware. By default, substream filtering is disabled. @@ -1884,60 +956,17 @@ with it, rather than trying to use FE_GET_INFO. In the case of a legacy frontend, the result is just the same as with FE_GET_INFO, but in a more structured format +The acceptable values are defined by :c:type:`fe_delivery_system`. + .. _DTV-INTERLEAVING: DTV_INTERLEAVING ================ -Time interleaving to be used. Currently, used only on DTMB. - - -.. c:type:: fe_interleaving - -.. flat-table:: enum fe_interleaving - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _INTERLEAVING-NONE: - - ``INTERLEAVING_NONE`` - - - No interleaving. - - - .. row 3 - - - .. _INTERLEAVING-AUTO: - - ``INTERLEAVING_AUTO`` - - - Auto-detect interleaving. - - - .. row 4 - - - .. _INTERLEAVING-240: - - ``INTERLEAVING_240`` - - - Interleaving of 240 symbols. - - - .. row 5 - - - .. _INTERLEAVING-720: - - ``INTERLEAVING_720`` - - - Interleaving of 720 symbols. +Time interleaving to be used. +The acceptable values are defined by :c:type:`fe_interleaving`. .. _DTV-LNA: diff --git a/Documentation/media/uapi/dvb/frontend-header.rst b/Documentation/media/uapi/dvb/frontend-header.rst new file mode 100644 index 000000000000..8d8433cf1e12 --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend-header.rst @@ -0,0 +1,4 @@ +Frontend uAPI data types +======================== + +.. kernel-doc:: include/uapi/linux/dvb/frontend.h diff --git a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst index dbc717cad9ee..0beb5cb3d729 100644 --- a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst @@ -100,7 +100,7 @@ to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible that some very sophisticated devices won't need certain parameters to tune. The information given here should help application writers to know how -to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API. +to handle ISDB-T and ISDB-Tsb hardware using the Linux Digital TV API. The details given here about ISDB-T and ISDB-Tsb are just enough to basically show the dependencies between the needed parameter values, but diff --git a/Documentation/media/uapi/dvb/frontend.rst b/Documentation/media/uapi/dvb/frontend.rst index e051a9012540..4967c48d46ce 100644 --- a/Documentation/media/uapi/dvb/frontend.rst +++ b/Documentation/media/uapi/dvb/frontend.rst @@ -2,20 +2,22 @@ .. _dvb_frontend: -################ -DVB Frontend API -################ -The DVB frontend API was designed to support three types of delivery -systems: +####################### +Digital TV Frontend API +####################### + +The Digital TV frontend API was designed to support three groups of delivery +systems: Terrestrial, cable and Satellite. Currently, the following +delivery systems are supported: - Terrestrial systems: DVB-T, DVB-T2, ATSC, ATSC M/H, ISDB-T, DVB-H, DTMB, CMMB -- Cable systems: DVB-C Annex A/C, ClearQAM (DVB-C Annex B), ISDB-C +- Cable systems: DVB-C Annex A/C, ClearQAM (DVB-C Annex B) - Satellite systems: DVB-S, DVB-S2, DVB Turbo, ISDB-S, DSS -The DVB frontend controls several sub-devices including: +The Digital TV frontend controls several sub-devices including: - Tuner @@ -23,7 +25,7 @@ The DVB frontend controls several sub-devices including: - Low noise amplifier (LNA) -- Satellite Equipment Control (SEC) hardware (only for Satellite). +- Satellite Equipment Control (SEC) [#f1]_. The frontend can be accessed through ``/dev/dvb/adapter?/frontend?``. Data types and ioctl definitions can be accessed by including @@ -31,16 +33,18 @@ Data types and ioctl definitions can be accessed by including .. note:: - Transmission via the internet (DVB-IP) is not yet handled by this - API but a future extension is possible. + Transmission via the internet (DVB-IP) and MMT (MPEG Media Transport) + is not yet handled by this API but a future extension is possible. + +.. [#f1] -On Satellite systems, the API support for the Satellite Equipment -Control (SEC) allows to power control and to send/receive signals to -control the antenna subsystem, selecting the polarization and choosing -the Intermediate Frequency IF) of the Low Noise Block Converter Feed -Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC -(digital SEC) specification is available at -`Eutelsat <http://www.eutelsat.com/satellites/4_5_5.html>`__. + On Satellite systems, the API support for the Satellite Equipment + Control (SEC) allows to power control and to send/receive signals to + control the antenna subsystem, selecting the polarization and choosing + the Intermediate Frequency IF) of the Low Noise Block Converter Feed + Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC + (digital SEC) specification is available at + `Eutelsat <http://www.eutelsat.com/satellites/4_5_5.html>`__. .. toctree:: @@ -50,4 +54,3 @@ Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC dvb-fe-read-status dvbproperty frontend_fcalls - frontend_legacy_dvbv3_api diff --git a/Documentation/media/uapi/dvb/frontend_f_close.rst b/Documentation/media/uapi/dvb/frontend_f_close.rst index f3b04b60246c..67958d73cf34 100644 --- a/Documentation/media/uapi/dvb/frontend_f_close.rst +++ b/Documentation/media/uapi/dvb/frontend_f_close.rst @@ -2,9 +2,9 @@ .. _frontend_f_close: -******************** -DVB frontend close() -******************** +*************************** +Digital TV frontend close() +*************************** Name ==== @@ -41,8 +41,10 @@ down automatically. Return Value ============ -The function returns 0 on success, -1 on failure and the ``errno`` is -set appropriately. Possible error codes: +On success 0 is returned. -EBADF - ``fd`` is not a valid open file descriptor. +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +Generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/frontend_f_open.rst b/Documentation/media/uapi/dvb/frontend_f_open.rst index 690eb375bdc1..8e8cb466c24b 100644 --- a/Documentation/media/uapi/dvb/frontend_f_open.rst +++ b/Documentation/media/uapi/dvb/frontend_f_open.rst @@ -2,9 +2,9 @@ .. _frontend_f_open: -******************* -DVB frontend open() -******************* +*************************** +Digital TV frontend open() +*************************** Name ==== @@ -79,24 +79,32 @@ On error, -1 is returned, and the ``errno`` variable is set appropriately. Possible error codes are: -EACCES - The caller has no permission to access the device. -EBUSY - The the device driver is already in use. +On success 0 is returned, and :c:type:`ca_slot_info` is filled. -ENXIO - No device corresponding to this device special file exists. +On error -1 is returned, and the ``errno`` variable is set +appropriately. -ENOMEM - Not enough kernel memory was available to complete the request. +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| -EMFILE - The process already has the maximum number of files open. +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 16 -ENFILE - The limit on the total number of files open on the system has been - reached. + - - ``EPERM`` + - The caller has no permission to access the device. -ENODEV - The device got removed. + - - ``EBUSY`` + - The the device driver is already in use. + + - - ``EMFILE`` + - The process already has the maximum number of files open. + + - - ``ENFILE`` + - The limit on the total number of files open on the system has been + reached. + + +The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/frontend_h.rst b/Documentation/media/uapi/dvb/frontend_h.rst deleted file mode 100644 index 15fca04d1c32..000000000000 --- a/Documentation/media/uapi/dvb/frontend_h.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _frontend_h: - -************************ -DVB Frontend Header File -************************ - -.. kernel-include:: $BUILDDIR/frontend.h.rst diff --git a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst index 7d4a091b7d7f..a4d5319cb76b 100644 --- a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst +++ b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst @@ -2,9 +2,9 @@ .. _frontend_legacy_dvbv3_api: -**************************************** -DVB Frontend legacy API (a. k. a. DVBv3) -**************************************** +*********************************************** +Digital TV Frontend legacy API (a. k. a. DVBv3) +*********************************************** The usage of this API is deprecated, as it doesn't support all digital TV standards, doesn't provide good statistics measurements and provides diff --git a/Documentation/media/uapi/dvb/headers.rst b/Documentation/media/uapi/dvb/headers.rst new file mode 100644 index 000000000000..c13fd537fbff --- /dev/null +++ b/Documentation/media/uapi/dvb/headers.rst @@ -0,0 +1,21 @@ +**************************** +Digital TV uAPI header files +**************************** + +Digital TV uAPI headers +*********************** + +.. kernel-include:: $BUILDDIR/frontend.h.rst + +.. kernel-include:: $BUILDDIR/dmx.h.rst + +.. kernel-include:: $BUILDDIR/ca.h.rst + +.. kernel-include:: $BUILDDIR/net.h.rst + +Legacy uAPI +*********** + +.. kernel-include:: $BUILDDIR/audio.h.rst + +.. kernel-include:: $BUILDDIR/video.h.rst diff --git a/Documentation/media/uapi/dvb/intro.rst b/Documentation/media/uapi/dvb/intro.rst index 652c4aacd2c6..79b4d0e4e920 100644 --- a/Documentation/media/uapi/dvb/intro.rst +++ b/Documentation/media/uapi/dvb/intro.rst @@ -13,15 +13,18 @@ What you need to know ===================== The reader of this document is required to have some knowledge in the -area of digital video broadcasting (DVB) and should be familiar with +area of digital video broadcasting (Digital TV) and should be familiar with part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e you should know what a program/transport stream (PS/TS) is and what is meant by a packetized elementary stream (PES) or an I-frame. -Various DVB standards documents are available from http://www.dvb.org -and/or http://www.etsi.org. +Various Digital TV standards documents are available for download at: -It is also necessary to know how to access unix/linux devices and how to +- European standards (DVB): http://www.dvb.org and/or http://www.etsi.org. +- American standards (ATSC): https://www.atsc.org/standards/ +- Japanese standards (ISDB): http://www.dibeg.org/ + +It is also necessary to know how to access Linux devices and how to use ioctl calls. This also includes the knowledge of C or C++. @@ -30,21 +33,25 @@ use ioctl calls. This also includes the knowledge of C or C++. History ======= -The first API for DVB cards we used at Convergence in late 1999 was an +The first API for Digital TV cards we used at Convergence in late 1999 was an extension of the Video4Linux API which was primarily developed for frame -grabber cards. As such it was not really well suited to be used for DVB -cards and their new features like recording MPEG streams and filtering +grabber cards. As such it was not really well suited to be used for Digital +TV cards and their new features like recording MPEG streams and filtering several section and PES data streams at the same time. -In early 2000, we were approached by Nokia with a proposal for a new -standard Linux DVB API. As a commitment to the development of terminals +In early 2000, Convergence was approached by Nokia with a proposal for a new +standard Linux Digital TV API. As a commitment to the development of terminals based on open standards, Nokia and Convergence made it available to all Linux developers and published it on https://linuxtv.org in September -2000. Convergence is the maintainer of the Linux DVB API. Together with -the LinuxTV community (i.e. you, the reader of this document), the Linux -DVB API will be constantly reviewed and improved. With the Linux driver -for the Siemens/Hauppauge DVB PCI card Convergence provides a first -implementation of the Linux DVB API. +2000. With the Linux driver for the Siemens/Hauppauge DVB PCI card, +Convergence provided a first implementation of the Linux Digital TV API. +Convergence was the maintainer of the Linux Digital TV API in the early +days. + +Now, the API is maintained by the LinuxTV community (i.e. you, the reader +of this document). The Linux Digital TV API is constantly reviewed and +improved together with the improvements at the subsystem's core at the +Kernel. .. _overview: @@ -59,61 +66,65 @@ Overview :alt: dvbstb.svg :align: center - Components of a DVB card/STB + Components of a Digital TV card/STB -A DVB PCI card or DVB set-top-box (STB) usually consists of the +A Digital TV card or set-top-box (STB) usually consists of the following main hardware components: -- Frontend consisting of tuner and DVB demodulator - - Here the raw signal reaches the DVB hardware from a satellite dish or +Frontend consisting of tuner and digital TV demodulator + Here the raw signal reaches the digital TV hardware from a satellite dish or antenna or directly from cable. The frontend down-converts and demodulates this signal into an MPEG transport stream (TS). In case of a satellite frontend, this includes a facility for satellite equipment control (SEC), which allows control of LNB polarization, multi feed switches or dish rotors. -- Conditional Access (CA) hardware like CI adapters and smartcard slots - +Conditional Access (CA) hardware like CI adapters and smartcard slots The complete TS is passed through the CA hardware. Programs to which the user has access (controlled by the smart card) are decoded in real time and re-inserted into the TS. -- Demultiplexer which filters the incoming DVB stream + .. note:: + Not every digital TV hardware provides conditional access hardware. + +Demultiplexer which filters the incoming Digital TV MPEG-TS stream The demultiplexer splits the TS into its components like audio and video streams. Besides usually several of such audio and video streams it also contains data streams with information about the programs offered in this or other streams of the same provider. -- MPEG2 audio and video decoder +Audio and video decoder + The main targets of the demultiplexer are audio and video + decoders. After decoding, they pass on the uncompressed audio and + video to the computer screen or to a TV set. + + .. note:: - The main targets of the demultiplexer are the MPEG2 audio and video - decoders. After decoding they pass on the uncompressed audio and - video to the computer screen or (through a PAL/NTSC encoder) to a TV - set. + Modern hardware usually doesn't have a separate decoder hardware, as + such functionality can be provided by the main CPU, by the graphics + adapter of the system or by a signal processing hardware embedded on + a Systems on a Chip (SoC) integrated circuit. + + It may also not be needed for certain usages (e.g. for data-only + uses like “internet over satellite”). :ref:`stb_components` shows a crude schematic of the control and data flow between those components. -On a DVB PCI card not all of these have to be present since some -functionality can be provided by the main CPU of the PC (e.g. MPEG -picture and sound decoding) or is not needed (e.g. for data-only uses -like “internet over satellite”). Also not every card or STB provides -conditional access hardware. .. _dvb_devices: -Linux DVB Devices -================= +Linux Digital TV Devices +======================== -The Linux DVB API lets you control these hardware components through +The Linux Digital TV API lets you control these hardware components through currently six Unix-style character devices for video, audio, frontend, demux, CA and IP-over-DVB networking. The video and audio devices control the MPEG2 decoder hardware, the frontend device the tuner and -the DVB demodulator. The demux device gives you control over the PES and -section filters of the hardware. If the hardware does not support +the Digital TV demodulator. The demux device gives you control over the PES +and section filters of the hardware. If the hardware does not support filtering these filters can be implemented in software. Finally, the CA device controls all the conditional access capabilities of the hardware. It can depend on the individual security requirements of the platform, @@ -137,9 +148,9 @@ individual devices are called: - ``/dev/dvb/adapterN/caM``, -where N enumerates the DVB PCI cards in a system starting from 0, and M -enumerates the devices of each type within each adapter, starting -from 0, too. We will omit the “ ``/dev/dvb/adapterN/``\ ” in the further +where ``N`` enumerates the Digital TV cards in a system starting from 0, and +``M`` enumerates the devices of each type within each adapter, starting +from 0, too. We will omit the “``/dev/dvb/adapterN/``\ ” in the further discussion of these devices. More details about the data structures and function calls of all the @@ -151,8 +162,8 @@ devices are described in the following chapters. API include files ================= -For each of the DVB devices a corresponding include file exists. The DVB -API include files should be included in application sources with a +For each of the Digital TV devices a corresponding include file exists. The +Digital TV API include files should be included in application sources with a partial path like: diff --git a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst index 2957f5a988b0..e1b2c9c7b620 100644 --- a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst +++ b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst @@ -2,19 +2,31 @@ .. _legacy_dvb_apis: -******************* -DVB Deprecated APIs -******************* +*************************** +Digital TV Deprecated APIs +*************************** -The APIs described here are kept only for historical reasons. There's -just one driver for a very legacy hardware that uses this API. No modern -drivers should use it. Instead, audio and video should be using the V4L2 -and ALSA APIs, and the pipelines should be set using the Media -Controller API +The APIs described here **should not** be used on new drivers or applications. + +The DVBv3 frontend API has issues with new delivery systems, including +DVB-S2, DVB-T2, ISDB, etc. + +There's just one driver for a very legacy hardware using the Digital TV +audio and video APIs. No modern drivers should use it. Instead, audio and +video should be using the V4L2 and ALSA APIs, and the pipelines should +be set via the Media Controller API. + +.. attention:: + + The APIs described here doesn't necessarily reflect the current + code implementation, as this section of the document was written + for DVB version 1, while the code reflects DVB version 3 + implementation. .. toctree:: :maxdepth: 1 + frontend_legacy_dvbv3_api video audio diff --git a/Documentation/media/uapi/dvb/net-add-if.rst b/Documentation/media/uapi/dvb/net-add-if.rst index 82ce2438213f..6749b70246c5 100644 --- a/Documentation/media/uapi/dvb/net-add-if.rst +++ b/Documentation/media/uapi/dvb/net-add-if.rst @@ -41,43 +41,13 @@ created. The struct :c:type:`dvb_net_if`::ifnum field will be filled with the number of the created interface. -.. c:type:: dvb_net_if - -.. flat-table:: struct dvb_net_if - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - pid - - - Packet ID (PID) of the MPEG-TS that contains data - - - .. row 3 - - - ifnum - - - number of the DVB interface. - - - .. row 4 - - - feedtype - - - Encapsulation type of the feed. It can be: - ``DVB_NET_FEEDTYPE_MPE`` for MPE encoding or - ``DVB_NET_FEEDTYPE_ULE`` for ULE encoding. - - Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned, and :c:type:`ca_slot_info` is filled. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/net-get-if.rst b/Documentation/media/uapi/dvb/net-get-if.rst index 1bb8ee0cbced..3733b34da9db 100644 --- a/Documentation/media/uapi/dvb/net-get-if.rst +++ b/Documentation/media/uapi/dvb/net-get-if.rst @@ -43,6 +43,10 @@ the ``errno`` with ``EINVAL`` error code. Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned, and :c:type:`ca_slot_info` is filled. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/net-remove-if.rst b/Documentation/media/uapi/dvb/net-remove-if.rst index 646af23a925a..4ebe07a6b79a 100644 --- a/Documentation/media/uapi/dvb/net-remove-if.rst +++ b/Documentation/media/uapi/dvb/net-remove-if.rst @@ -39,6 +39,10 @@ The NET_REMOVE_IF ioctl deletes an interface previously created via Return Value ============ -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the +On success 0 is returned, and :c:type:`ca_slot_info` is filled. + +On error -1 is returned, and the ``errno`` variable is set +appropriately. + +The generic error codes are described at the :ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst new file mode 100644 index 000000000000..e1177bdcd623 --- /dev/null +++ b/Documentation/media/uapi/dvb/net-types.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_types: + +************** +Net Data Types +************** + +.. kernel-doc:: include/uapi/linux/dvb/net.h diff --git a/Documentation/media/uapi/dvb/net.rst b/Documentation/media/uapi/dvb/net.rst index eca42dd53261..e0cd4e402627 100644 --- a/Documentation/media/uapi/dvb/net.rst +++ b/Documentation/media/uapi/dvb/net.rst @@ -2,10 +2,11 @@ .. _net: -############### -DVB Network API -############### -The DVB net device controls the mapping of data packages that are part +###################### +Digital TV Network API +###################### + +The Digital TV net device controls the mapping of data packages that are part of a transport stream to be mapped into a virtual network interface, visible through the standard Linux network protocol stack. @@ -28,13 +29,13 @@ header. .. _net_fcalls: -###################### -DVB net Function Calls -###################### +Digital TV net Function Calls +############################# .. toctree:: :maxdepth: 1 + net-types net-add-if net-remove-if net-get-if diff --git a/Documentation/media/uapi/dvb/net_h.rst b/Documentation/media/uapi/dvb/net_h.rst deleted file mode 100644 index 7bcf5ba9d1eb..000000000000 --- a/Documentation/media/uapi/dvb/net_h.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _net_h: - -*********************** -DVB Network Header File -*********************** - -.. kernel-include:: $BUILDDIR/net.h.rst diff --git a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst index 81cd9b92a36c..51ec0b04b496 100644 --- a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst +++ b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst @@ -9,5 +9,5 @@ Querying frontend information Usually, the first thing to do when the frontend is opened is to check the frontend capabilities. This is done using :ref:`FE_GET_INFO`. This ioctl will enumerate the -DVB API version and other characteristics about the frontend, and can be -opened either in read only or read/write mode. +Digital TV API version and other characteristics about the frontend, and can +be opened either in read only or read/write mode. diff --git a/Documentation/media/uapi/dvb/video-continue.rst b/Documentation/media/uapi/dvb/video-continue.rst index 030c2ec98869..e65e600be632 100644 --- a/Documentation/media/uapi/dvb/video-continue.rst +++ b/Documentation/media/uapi/dvb/video-continue.rst @@ -44,7 +44,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To control a V4L2 decoder use the +This ioctl is for Digital TV devices only. To control a V4L2 decoder use the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. This ioctl call restarts decoding and playing processes of the video diff --git a/Documentation/media/uapi/dvb/video-freeze.rst b/Documentation/media/uapi/dvb/video-freeze.rst index 9cef65a02e8d..5a28bdc8badd 100644 --- a/Documentation/media/uapi/dvb/video-freeze.rst +++ b/Documentation/media/uapi/dvb/video-freeze.rst @@ -44,14 +44,14 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To control a V4L2 decoder use the +This ioctl is for Digital TV devices only. To control a V4L2 decoder use the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. This ioctl call suspends the live video stream being played. Decoding and playing are frozen. It is then possible to restart the decoding and playing process of the video stream using the VIDEO_CONTINUE command. If VIDEO_SOURCE_MEMORY is selected in the ioctl call -VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more data +VIDEO_SELECT_SOURCE, the Digital TV subsystem will not decode any more data until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed. diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst index 6ad14cdb894a..b4f53616db9a 100644 --- a/Documentation/media/uapi/dvb/video-get-event.rst +++ b/Documentation/media/uapi/dvb/video-get-event.rst @@ -50,7 +50,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To get events from a V4L2 decoder +This ioctl is for Digital TV devices only. To get events from a V4L2 decoder use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead. This ioctl call returns an event of type video_event if available. If diff --git a/Documentation/media/uapi/dvb/video-play.rst b/Documentation/media/uapi/dvb/video-play.rst index 3f66ae3b7e35..2124120aec22 100644 --- a/Documentation/media/uapi/dvb/video-play.rst +++ b/Documentation/media/uapi/dvb/video-play.rst @@ -44,7 +44,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To control a V4L2 decoder use the +This ioctl is for Digital TV devices only. To control a V4L2 decoder use the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. This ioctl call asks the Video Device to start playing a video stream diff --git a/Documentation/media/uapi/dvb/video-select-source.rst b/Documentation/media/uapi/dvb/video-select-source.rst index 2f4fbf4b490c..cde6542723ca 100644 --- a/Documentation/media/uapi/dvb/video-select-source.rst +++ b/Documentation/media/uapi/dvb/video-select-source.rst @@ -50,7 +50,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. This ioctl was also supported by the +This ioctl is for Digital TV devices only. This ioctl was also supported by the V4L2 ivtv driver, but that has been replaced by the ivtv-specific ``IVTV_IOC_PASSTHROUGH_MODE`` ioctl. diff --git a/Documentation/media/uapi/dvb/video-stop.rst b/Documentation/media/uapi/dvb/video-stop.rst index fb827effb276..474309ad31c2 100644 --- a/Documentation/media/uapi/dvb/video-stop.rst +++ b/Documentation/media/uapi/dvb/video-stop.rst @@ -60,7 +60,7 @@ Arguments Description ----------- -This ioctl is for DVB devices only. To control a V4L2 decoder use the +This ioctl is for Digital TV devices only. To control a V4L2 decoder use the V4L2 :ref:`VIDIOC_DECODER_CMD` instead. This ioctl call asks the Video Device to stop playing the current diff --git a/Documentation/media/uapi/dvb/video.rst b/Documentation/media/uapi/dvb/video.rst index 60d43fb7ce22..e7d68cd0cf23 100644 --- a/Documentation/media/uapi/dvb/video.rst +++ b/Documentation/media/uapi/dvb/video.rst @@ -2,20 +2,21 @@ .. _dvb_video: -################ -DVB Video Device -################ -The DVB video device controls the MPEG2 video decoder of the DVB -hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data +####################### +Digital TV Video Device +####################### + +The Digital TV video device controls the MPEG2 video decoder of the Digital +TV hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data types and and ioctl definitions can be accessed by including **linux/dvb/video.h** in your application. -Note that the DVB video device only controls decoding of the MPEG video +Note that the Digital TV video device only controls decoding of the MPEG video stream, not its presentation on the TV or computer screen. On PCs this is typically handled by an associated video4linux device, e.g. **/dev/video**, which allows scaling and defining output windows. -Some DVB cards don’t have their own MPEG decoder, which results in the +Some Digital TV cards don’t have their own MPEG decoder, which results in the omission of the audio and video device as well as the video4linux device. diff --git a/Documentation/media/uapi/dvb/video_h.rst b/Documentation/media/uapi/dvb/video_h.rst deleted file mode 100644 index 3f39b0c4879c..000000000000 --- a/Documentation/media/uapi/dvb/video_h.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _video_h: - -********************* -DVB Video Header File -********************* - -.. kernel-include:: $BUILDDIR/video.h.rst diff --git a/Documentation/media/uapi/gen-errors.rst b/Documentation/media/uapi/gen-errors.rst index d39e34d1b19d..689d3b101ede 100644 --- a/Documentation/media/uapi/gen-errors.rst +++ b/Documentation/media/uapi/gen-errors.rst @@ -17,9 +17,7 @@ Generic Error Codes :widths: 1 16 - - .. row 1 - - - ``EAGAIN`` (aka ``EWOULDBLOCK``) + - - ``EAGAIN`` (aka ``EWOULDBLOCK``) - The ioctl can't be handled because the device is in state where it can't perform it. This could happen for example in case where @@ -27,15 +25,11 @@ Generic Error Codes is also returned when the ioctl would need to wait for an event, but the device was opened in non-blocking mode. - - .. row 2 - - - ``EBADF`` + - - ``EBADF`` - The file descriptor is not a valid. - - .. row 3 - - - ``EBUSY`` + - - ``EBUSY`` - The ioctl can't be handled because the device is busy. This is typically return while device is streaming, and an ioctl tried to @@ -44,64 +38,53 @@ Generic Error Codes ioctl must not be retried without performing another action to fix the problem first (typically: stop the stream before retrying). - - .. row 4 - - - ``EFAULT`` + - - ``EFAULT`` - There was a failure while copying data from/to userspace, probably caused by an invalid pointer reference. - - .. row 5 - - - ``EINVAL`` + - - ``EINVAL`` - One or more of the ioctl parameters are invalid or out of the allowed range. This is a widely used error code. See the individual ioctl requests for specific causes. - - .. row 6 - - - ``ENODEV`` + - - ``ENODEV`` - Device not found or was removed. - - .. row 7 - - - ``ENOMEM`` + - - ``ENOMEM`` - There's not enough memory to handle the desired operation. - - .. row 8 - - - ``ENOTTY`` + - - ``ENOTTY`` - The ioctl is not supported by the driver, actually meaning that the required functionality is not available, or the file descriptor is not for a media device. - - .. row 9 - - - ``ENOSPC`` + - - ``ENOSPC`` - On USB devices, the stream ioctl's can return this error, meaning that this request would overcommit the usb bandwidth reserved for periodic transfers (up to 80% of the USB bandwidth). - - .. row 10 - - - ``EPERM`` + - - ``EPERM`` - Permission denied. Can be returned if the device needs write permission, or some special capabilities is needed (e. g. root) - - .. row 11 - - - ``EIO`` + - - ``EIO`` - I/O error. Typically used when there are problems communicating with a hardware device. This could indicate broken or flaky hardware. It's a 'Something is wrong, I give up!' type of error. + - - ``ENXIO`` + + - No device corresponding to this device special file exists. + + .. note:: #. This list is not exhaustive; ioctls may return other error codes. diff --git a/Documentation/media/uapi/mediactl/media-controller.rst b/Documentation/media/uapi/mediactl/media-controller.rst index 7ae38d48969e..0eea4f9a07d5 100644 --- a/Documentation/media/uapi/mediactl/media-controller.rst +++ b/Documentation/media/uapi/mediactl/media-controller.rst @@ -8,7 +8,9 @@ Part IV - Media Controller API ############################## -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst index 0fd329279bef..b59ce149efb5 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst @@ -51,7 +51,7 @@ id's until they get an error. .. c:type:: media_entity_desc -.. tabularcolumns:: |p{1.5cm}|p{1.5cm}|p{1.5cm}|p{1.5cm}|p{11.5cm}| +.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{11.2cm}| .. flat-table:: struct media_entity_desc :header-rows: 0 diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst index add8281494f8..997e6b17440d 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst @@ -46,7 +46,7 @@ other values untouched. If the ``topology_version`` remains the same, the ioctl should fill the desired arrays with the media graph elements. -.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| +.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.5cm}| .. c:type:: media_v2_topology diff --git a/Documentation/media/uapi/mediactl/media-types.rst b/Documentation/media/uapi/mediactl/media-types.rst index 71078565d644..8d64b0c06ebc 100644 --- a/Documentation/media/uapi/mediactl/media-types.rst +++ b/Documentation/media/uapi/mediactl/media-types.rst @@ -5,7 +5,7 @@ Types and flags used to represent the media graph elements ========================================================== -.. tabularcolumns:: |p{8.0cm}|p{10.5cm}| +.. tabularcolumns:: |p{8.2cm}|p{10.3cm}| .. _media-entity-type: diff --git a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst index 3476ae29708f..2d01358d5504 100644 --- a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst +++ b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst @@ -34,9 +34,9 @@ receiver device where N is the number of the receiver. /sys/class/rc/rcN/protocols =========================== -Reading this file returns a list of available protocols, something like: +Reading this file returns a list of available protocols, something like:: -``rc5 [rc6] nec jvc [sony]`` + rc5 [rc6] nec jvc [sony] Enabled protocols are shown in [] brackets. @@ -90,11 +90,11 @@ This value may be reset to 0 if the current protocol is altered. ================================== Reading this file returns a list of available protocols to use for the -wakeup filter, something like: +wakeup filter, something like:: -``rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce`` + rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce -Note that protocol variants are listed, so "nec", "sony", "rc-5", "rc-6" +Note that protocol variants are listed, so ``nec``, ``sony``, ``rc-5``, ``rc-6`` have their different bit length encodings listed if available. Note that all protocol variants are listed. diff --git a/Documentation/media/uapi/rc/remote_controllers.rst b/Documentation/media/uapi/rc/remote_controllers.rst index 3e25cc9f65e0..46a8acb82125 100644 --- a/Documentation/media/uapi/rc/remote_controllers.rst +++ b/Documentation/media/uapi/rc/remote_controllers.rst @@ -8,7 +8,9 @@ Part III - Remote Controller API ################################ -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents diff --git a/Documentation/media/uapi/v4l/pixfmt-006.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst index 7ae7dcf73f63..410907fe9415 100644 --- a/Documentation/media/uapi/v4l/pixfmt-006.rst +++ b/Documentation/media/uapi/v4l/colorspaces-defs.rst @@ -76,6 +76,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum .. c:type:: v4l2_xfer_func +.. tabularcolumns:: |p{5.5cm}|p{12.0cm}| + .. flat-table:: V4L2 Transfer Function :header-rows: 1 :stub-columns: 0 @@ -97,7 +99,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum * - ``V4L2_XFER_FUNC_DCI_P3`` - Use the DCI-P3 transfer function. * - ``V4L2_XFER_FUNC_SMPTE2084`` - - Use the SMPTE 2084 transfer function. + - Use the SMPTE 2084 transfer function. See :ref:`xf-smpte-2084`. diff --git a/Documentation/media/uapi/v4l/pixfmt-007.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst index 0c30ee2577d3..b5d551b9cc8f 100644 --- a/Documentation/media/uapi/v4l/pixfmt-007.rst +++ b/Documentation/media/uapi/v4l/colorspaces-details.rst @@ -418,6 +418,11 @@ Inverse Transfer function: L = \left( \frac{L' + 0.099}{1.099}\right) ^{\frac{1}{0.45} }\text{, for } L' \ge 0.081 +Please note that while Rec. 709 is defined as the default transfer function +by the :ref:`itu2020` standard, in practice this colorspace is often used +with the :ref:`xf-smpte-2084`. In particular Ultra HD Blu-ray discs use +this combination. + The luminance (Y') and color difference (Cb and Cr) are obtained with the following ``V4L2_YCBCR_ENC_BT2020`` encoding: @@ -758,3 +763,45 @@ scaled to [-128…128] and then clipped to [-128…127]. ``V4L2_COLORSPACE_JPEG`` can be considered to be an abbreviation for ``V4L2_COLORSPACE_SRGB``, ``V4L2_YCBCR_ENC_601`` and ``V4L2_QUANTIZATION_FULL_RANGE``. + +*************************************** +Detailed Transfer Function Descriptions +*************************************** + +.. _xf-smpte-2084: + +Transfer Function SMPTE 2084 (V4L2_XFER_FUNC_SMPTE2084) +======================================================= + +The :ref:`smpte2084` standard defines the transfer function used by +High Dynamic Range content. + +Constants: + m1 = (2610 / 4096) / 4 + + m2 = (2523 / 4096) * 128 + + c1 = 3424 / 4096 + + c2 = (2413 / 4096) * 32 + + c3 = (2392 / 4096) * 32 + +Transfer function: + L' = ((c1 + c2 * L\ :sup:`m1`) / (1 + c3 * L\ :sup:`m1`))\ :sup:`m2` + +Inverse Transfer function: + L = (max(L':sup:`1/m2` - c1, 0) / (c2 - c3 * + L'\ :sup:`1/m2`))\ :sup:`1/m1` + +Take care when converting between this transfer function and non-HDR transfer +functions: the linear RGB values [0…1] of HDR content map to a luminance range +of 0 to 10000 cd/m\ :sup:`2` whereas the linear RGB values of non-HDR (aka +Standard Dynamic Range or SDR) map to a luminance range of 0 to 100 cd/m\ :sup:`2`. + +To go from SDR to HDR you will have to divide L by 100 first. To go in the other +direction you will have to multiply L by 100. Of course, this clamps all +luminance values over 100 cd/m\ :sup:`2` to 100 cd/m\ :sup:`2`. + +There are better methods, see e.g. :ref:`colimg` for more in-depth information +about this. diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst index 62518adfe37b..f7ac8d0d3af1 100644 --- a/Documentation/media/uapi/v4l/dev-meta.rst +++ b/Documentation/media/uapi/v4l/dev-meta.rst @@ -42,6 +42,8 @@ the :c:type:`v4l2_format` structure to 0. .. _v4l2-meta-format: +.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}| + .. flat-table:: struct v4l2_meta_format :header-rows: 0 :stub-columns: 0 diff --git a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst index 5f6d534ea73b..9d6c860271cb 100644 --- a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst +++ b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst @@ -105,7 +105,13 @@ which may return ``EBUSY`` can be the struct v4l2_sliced_vbi_format ----------------------------- -.. tabularcolumns:: |p{1.0cm}|p{4.5cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}| +.. raw:: latex + + \begingroup + \scriptsize + \setlength{\tabcolsep}{2pt} + +.. tabularcolumns:: |p{.75cm}|p{3.3cm}|p{3.4cm}|p{3.4cm}|p{3.4cm}| .. cssclass:: longtable @@ -199,6 +205,9 @@ struct v4l2_sliced_vbi_format Applications and drivers must set it to zero. +.. raw:: latex + + \endgroup .. _vbi-services2: @@ -207,9 +216,9 @@ Sliced VBI services .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \footnotesize -.. tabularcolumns:: |p{5.0cm}|p{1.4cm}|p{3.0cm}|p{2.5cm}|p{9.0cm}| +.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}| .. flat-table:: :header-rows: 1 @@ -263,7 +272,7 @@ Sliced VBI services .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize Drivers may return an ``EINVAL`` error code when applications attempt to @@ -457,7 +466,7 @@ number). struct v4l2_mpeg_vbi_fmt_ivtv ----------------------------- -.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{1.0cm}|p{11.5cm}| +.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}| .. flat-table:: :header-rows: 0 @@ -525,7 +534,7 @@ Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0 ------------------------------------------------- -.. tabularcolumns:: |p{4.4cm}|p{2.4cm}|p{10.7cm}| +.. tabularcolumns:: |p{4.9cm}|p{2.4cm}|p{10.2cm}| .. flat-table:: :header-rows: 0 @@ -574,7 +583,7 @@ structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0 struct v4l2_mpeg_vbi_ITV0 ------------------------- -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.9cm}|p{4.4cm}|p{8.2cm}| .. flat-table:: :header-rows: 0 diff --git a/Documentation/media/uapi/v4l/dev-subdev.rst b/Documentation/media/uapi/v4l/dev-subdev.rst index f0e762167730..d20d945803a7 100644 --- a/Documentation/media/uapi/v4l/dev-subdev.rst +++ b/Documentation/media/uapi/v4l/dev-subdev.rst @@ -204,9 +204,9 @@ list entity names and pad numbers). .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \tiny -.. tabularcolumns:: |p{4.5cm}|p{4.5cm}|p{4.5cm}|p{4.5cm}|p{4.5cm}|p{4.5cm}|p{4.5cm}| +.. tabularcolumns:: |p{2.0cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}| .. _sample-pipeline-config: @@ -253,7 +253,7 @@ list entity names and pad numbers). .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize 1. Initial state. The sensor source pad format is set to its native 3MP size and V4L2_MBUS_FMT_SGRBG8_1X8 media bus code. Formats on the @@ -370,7 +370,7 @@ circumstances. This may also cause the accessed rectangle to be adjusted by the driver, depending on the properties of the underlying hardware. The coordinates to a step always refer to the actual size of the -previous step. The exception to this rule is the source compose +previous step. The exception to this rule is the sink compose rectangle, which refers to the sink compose bounds rectangle --- if it is supported by the hardware. diff --git a/Documentation/media/uapi/v4l/driver.rst b/Documentation/media/uapi/v4l/driver.rst deleted file mode 100644 index 2319b383f0a4..000000000000 --- a/Documentation/media/uapi/v4l/driver.rst +++ /dev/null @@ -1,9 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _driver: - -*********************** -V4L2 Driver Programming -*********************** - -to do diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 9acc9cad49e2..a3e81c1d276b 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -942,21 +942,21 @@ enum v4l2_mpeg_video_mpeg4_level - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_VIDEO_LEVEL_0`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0`` - Level 0 - * - ``V4L2_MPEG_VIDEO_LEVEL_0B`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B`` - Level 0b - * - ``V4L2_MPEG_VIDEO_LEVEL_1`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_1`` - Level 1 - * - ``V4L2_MPEG_VIDEO_LEVEL_2`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_2`` - Level 2 - * - ``V4L2_MPEG_VIDEO_LEVEL_3`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3`` - Level 3 - * - ``V4L2_MPEG_VIDEO_LEVEL_3B`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B`` - Level 3b - * - ``V4L2_MPEG_VIDEO_LEVEL_4`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_4`` - Level 4 - * - ``V4L2_MPEG_VIDEO_LEVEL_5`` + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_5`` - Level 5 @@ -1028,15 +1028,15 @@ enum v4l2_mpeg_video_mpeg4_profile - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_VIDEO_PROFILE_SIMPLE`` + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE`` - Simple profile - * - ``V4L2_MPEG_VIDEO_PROFILE_ADVANCED_SIMPLE`` + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE`` - Advanced Simple profile - * - ``V4L2_MPEG_VIDEO_PROFILE_CORE`` + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE`` - Core profile - * - ``V4L2_MPEG_VIDEO_PROFILE_SIMPLE_SCALABLE`` + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE`` - Simple Scalable profile - * - ``V4L2_MPEG_VIDEO_PROFILE_ADVANCED_CODING_EFFICIENCY`` + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY`` - @@ -1922,9 +1922,9 @@ enum v4l2_vp8_golden_frame_sel - .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \footnotesize -.. tabularcolumns:: |p{11.0cm}|p{10.0cm}| +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| .. flat-table:: :header-rows: 0 @@ -1940,7 +1940,7 @@ enum v4l2_vp8_golden_frame_sel - .. raw:: latex - \end{adjustbox} + \normalsize ``V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (integer)`` diff --git a/Documentation/media/uapi/v4l/format.rst b/Documentation/media/uapi/v4l/format.rst index 452c6d59cad5..3e3efb0e349e 100644 --- a/Documentation/media/uapi/v4l/format.rst +++ b/Documentation/media/uapi/v4l/format.rst @@ -78,7 +78,7 @@ output devices is available. [#f1]_ The :ref:`VIDIOC_ENUM_FMT` ioctl must be supported by all drivers exchanging image data with applications. - **Important** +.. important:: Drivers are not supposed to convert image formats in kernel space. They must enumerate only formats directly supported by the hardware. diff --git a/Documentation/media/uapi/v4l/pixfmt-008.rst b/Documentation/media/uapi/v4l/pixfmt-008.rst deleted file mode 100644 index 4bec79784bdd..000000000000 --- a/Documentation/media/uapi/v4l/pixfmt-008.rst +++ /dev/null @@ -1,32 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -*************************************** -Detailed Transfer Function Descriptions -*************************************** - - -.. _xf-smpte-2084: - -Transfer Function SMPTE 2084 (V4L2_XFER_FUNC_SMPTE2084) -======================================================= - -The :ref:`smpte2084` standard defines the transfer function used by -High Dynamic Range content. - -Constants: - m1 = (2610 / 4096) / 4 - - m2 = (2523 / 4096) * 128 - - c1 = 3424 / 4096 - - c2 = (2413 / 4096) * 32 - - c3 = (2392 / 4096) * 32 - -Transfer function: - L' = ((c1 + c2 * L\ :sup:`m1`) / (1 + c3 * L\ :sup:`m1`))\ :sup:`m2` - -Inverse Transfer function: - L = (max(L':sup:`1/m2` - c1, 0) / (c2 - c3 * - L'\ :sup:`1/m2`))\ :sup:`1/m1` diff --git a/Documentation/media/uapi/v4l/pixfmt-013.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst index 728d7ede10fa..728d7ede10fa 100644 --- a/Documentation/media/uapi/v4l/pixfmt-013.rst +++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst diff --git a/Documentation/media/uapi/v4l/pixfmt-004.rst b/Documentation/media/uapi/v4l/pixfmt-intro.rst index 4bc116aa8193..4bc116aa8193 100644 --- a/Documentation/media/uapi/v4l/pixfmt-004.rst +++ b/Documentation/media/uapi/v4l/pixfmt-intro.rst diff --git a/Documentation/media/uapi/v4l/pixfmt-inzi.rst b/Documentation/media/uapi/v4l/pixfmt-inzi.rst index 9849e799f205..75272f80bc8a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-inzi.rst +++ b/Documentation/media/uapi/v4l/pixfmt-inzi.rst @@ -34,11 +34,12 @@ The second plane provides 16-bit per-pixel Depth data arranged in Each cell is a 16-bit word with more significant data stored at higher memory address (byte order is little-endian). + .. raw:: latex - \newline\newline\begin{adjustbox}{width=\columnwidth} + \small -.. tabularcolumns:: |p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}| +.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}|p{2.5cm}| .. flat-table:: :header-rows: 0 @@ -78,4 +79,4 @@ memory address (byte order is little-endian). .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize diff --git a/Documentation/media/uapi/v4l/pixfmt-m420.rst b/Documentation/media/uapi/v4l/pixfmt-m420.rst index 7dd47c071e2f..6703f4079c3e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-m420.rst +++ b/Documentation/media/uapi/v4l/pixfmt-m420.rst @@ -66,7 +66,7 @@ Each cell is one byte. - Cr\ :sub:`11` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12.rst b/Documentation/media/uapi/v4l/pixfmt-nv12.rst index 5b45a6d2ac95..2776b41377d5 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12.rst @@ -71,7 +71,7 @@ Each cell is one byte. - Cr\ :sub:`11` -**Color Sample Location..** +**Color Sample Location:** .. flat-table:: :header-rows: 0 diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst index de3051fd6b50..c1a2779f604c 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst @@ -83,7 +83,7 @@ Each cell is one byte. - Cr\ :sub:`11` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16.rst b/Documentation/media/uapi/v4l/pixfmt-nv16.rst index 8ceba79ff636..f0fdad3006cf 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv16.rst @@ -79,7 +79,7 @@ Each cell is one byte. - Cr\ :sub:`31` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst index 4d46ab39f9f1..c45f036763e7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst @@ -83,7 +83,7 @@ Each cell is one byte. - Cr\ :sub:`32` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst index 3fdb34ce2f09..8edf65c80660 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst @@ -17,11 +17,14 @@ cylinder: 0 being the smallest value and 255 the maximum. The values are packed in 24 or 32 bit formats. + .. raw:: latex - \newline\begin{adjustbox}{width=\columnwidth} + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{4.2cm}|p{1.0cm}|p{0.7cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{1.7cm}| +.. tabularcolumns:: |p{2.0cm}|p{0.54cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _packed-hsv-formats: @@ -33,11 +36,8 @@ The values are packed in 24 or 32 bit formats. - Code - - :cspan:`7` Byte 0 in memory - - - :cspan:`7` Byte 1 - - - :cspan:`7` Byte 2 - - - :cspan:`7` Byte 3 * - - @@ -50,7 +50,7 @@ The values are packed in 24 or 32 bit formats. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -59,7 +59,7 @@ The values are packed in 24 or 32 bit formats. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -68,7 +68,7 @@ The values are packed in 24 or 32 bit formats. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -90,7 +90,7 @@ The values are packed in 24 or 32 bit formats. - - - - - + - h\ :sub:`7` - h\ :sub:`6` - h\ :sub:`5` @@ -99,7 +99,7 @@ The values are packed in 24 or 32 bit formats. - h\ :sub:`2` - h\ :sub:`1` - h\ :sub:`0` - - + - s\ :sub:`7` - s\ :sub:`6` - s\ :sub:`5` @@ -108,7 +108,7 @@ The values are packed in 24 or 32 bit formats. - s\ :sub:`2` - s\ :sub:`1` - s\ :sub:`0` - - + - v\ :sub:`7` - v\ :sub:`6` - v\ :sub:`5` @@ -130,7 +130,7 @@ The values are packed in 24 or 32 bit formats. - h\ :sub:`2` - h\ :sub:`1` - h\ :sub:`0` - - + - s\ :sub:`7` - s\ :sub:`6` - s\ :sub:`5` @@ -139,7 +139,7 @@ The values are packed in 24 or 32 bit formats. - s\ :sub:`2` - s\ :sub:`1` - s\ :sub:`0` - - + - v\ :sub:`7` - v\ :sub:`6` - v\ :sub:`5` @@ -149,9 +149,9 @@ The values are packed in 24 or 32 bit formats. - v\ :sub:`1` - v\ :sub:`0` - - - + .. raw:: latex - \end{adjustbox}\newline\newline + \endgroup Bit 7 is the most significant bit. diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst index 84fcbcb74171..4938d9655a41 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst @@ -16,9 +16,12 @@ next to each other in memory. .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} + +.. tabularcolumns:: |p{2.3cm}|p{1.6cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| -.. tabularcolumns:: |p{4.5cm}|p{3.3cm}|p{0.7cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{1.7cm}| .. _rgb-formats: @@ -28,17 +31,12 @@ next to each other in memory. * - Identifier - Code - - - :cspan:`7` Byte 0 in memory - - - :cspan:`7` Byte 1 - - - :cspan:`7` Byte 2 - - - :cspan:`7` Byte 3 * - - - - Bit - 7 - 6 - 5 @@ -47,7 +45,7 @@ next to each other in memory. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -56,7 +54,7 @@ next to each other in memory. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -65,7 +63,7 @@ next to each other in memory. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -78,7 +76,7 @@ next to each other in memory. - ``V4L2_PIX_FMT_RGB332`` - 'RGB1' - - + - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` @@ -87,11 +85,12 @@ next to each other in memory. - g\ :sub:`0` - b\ :sub:`1` - b\ :sub:`0` + - * .. _V4L2-PIX-FMT-ARGB444: - ``V4L2_PIX_FMT_ARGB444`` - 'AR12' - - + - g\ :sub:`3` - g\ :sub:`2` - g\ :sub:`1` @@ -100,7 +99,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - a\ :sub:`3` - a\ :sub:`2` - a\ :sub:`1` @@ -109,11 +108,12 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` + - * .. _V4L2-PIX-FMT-XRGB444: - ``V4L2_PIX_FMT_XRGB444`` - 'XR12' - - + - g\ :sub:`3` - g\ :sub:`2` - g\ :sub:`1` @@ -122,7 +122,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - - - @@ -131,11 +131,12 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` + - * .. _V4L2-PIX-FMT-ARGB555: - ``V4L2_PIX_FMT_ARGB555`` - 'AR15' - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -144,7 +145,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - a - r\ :sub:`4` - r\ :sub:`3` @@ -153,11 +154,12 @@ next to each other in memory. - r\ :sub:`0` - g\ :sub:`4` - g\ :sub:`3` + - * .. _V4L2-PIX-FMT-XRGB555: - ``V4L2_PIX_FMT_XRGB555`` - 'XR15' - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -166,7 +168,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - - r\ :sub:`4` - r\ :sub:`3` @@ -175,11 +177,12 @@ next to each other in memory. - r\ :sub:`0` - g\ :sub:`4` - g\ :sub:`3` + - * .. _V4L2-PIX-FMT-RGB565: - ``V4L2_PIX_FMT_RGB565`` - 'RGBP' - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -188,7 +191,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - r\ :sub:`4` - r\ :sub:`3` - r\ :sub:`2` @@ -197,11 +200,12 @@ next to each other in memory. - g\ :sub:`5` - g\ :sub:`4` - g\ :sub:`3` + - * .. _V4L2-PIX-FMT-ARGB555X: - ``V4L2_PIX_FMT_ARGB555X`` - 'AR15' | (1 << 31) - - + - a - r\ :sub:`4` - r\ :sub:`3` @@ -210,7 +214,7 @@ next to each other in memory. - r\ :sub:`0` - g\ :sub:`4` - g\ :sub:`3` - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -219,11 +223,12 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + - * .. _V4L2-PIX-FMT-XRGB555X: - ``V4L2_PIX_FMT_XRGB555X`` - 'XR15' | (1 << 31) - - + - - r\ :sub:`4` - r\ :sub:`3` @@ -232,7 +237,7 @@ next to each other in memory. - r\ :sub:`0` - g\ :sub:`4` - g\ :sub:`3` - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -241,11 +246,12 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + - * .. _V4L2-PIX-FMT-RGB565X: - ``V4L2_PIX_FMT_RGB565X`` - 'RGBR' - - + - r\ :sub:`4` - r\ :sub:`3` - r\ :sub:`2` @@ -254,7 +260,7 @@ next to each other in memory. - g\ :sub:`5` - g\ :sub:`4` - g\ :sub:`3` - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -263,11 +269,12 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + - * .. _V4L2-PIX-FMT-BGR24: - ``V4L2_PIX_FMT_BGR24`` - 'BGR3' - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -276,7 +283,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -285,7 +292,7 @@ next to each other in memory. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -294,11 +301,12 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` + - * .. _V4L2-PIX-FMT-RGB24: - ``V4L2_PIX_FMT_RGB24`` - 'RGB3' - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -307,7 +315,7 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -316,7 +324,7 @@ next to each other in memory. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -325,11 +333,12 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + - * .. _V4L2-PIX-FMT-BGR666: - ``V4L2_PIX_FMT_BGR666`` - 'BGRH' - - + - b\ :sub:`5` - b\ :sub:`4` - b\ :sub:`3` @@ -338,7 +347,7 @@ next to each other in memory. - b\ :sub:`0` - g\ :sub:`5` - g\ :sub:`4` - - + - g\ :sub:`3` - g\ :sub:`2` - g\ :sub:`1` @@ -347,7 +356,7 @@ next to each other in memory. - r\ :sub:`4` - r\ :sub:`3` - r\ :sub:`2` - - + - r\ :sub:`1` - r\ :sub:`0` - @@ -356,7 +365,7 @@ next to each other in memory. - - - - - + - - - @@ -369,7 +378,7 @@ next to each other in memory. - ``V4L2_PIX_FMT_ABGR32`` - 'AR24' - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -378,7 +387,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -387,7 +396,7 @@ next to each other in memory. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -396,7 +405,7 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - a\ :sub:`7` - a\ :sub:`6` - a\ :sub:`5` @@ -409,7 +418,7 @@ next to each other in memory. - ``V4L2_PIX_FMT_XBGR32`` - 'XR24' - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -418,7 +427,7 @@ next to each other in memory. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -427,7 +436,7 @@ next to each other in memory. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -436,7 +445,7 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - - - @@ -449,7 +458,7 @@ next to each other in memory. - ``V4L2_PIX_FMT_ARGB32`` - 'BA24' - - + - a\ :sub:`7` - a\ :sub:`6` - a\ :sub:`5` @@ -458,7 +467,7 @@ next to each other in memory. - a\ :sub:`2` - a\ :sub:`1` - a\ :sub:`0` - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -467,7 +476,7 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -476,7 +485,7 @@ next to each other in memory. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -489,6 +498,7 @@ next to each other in memory. - ``V4L2_PIX_FMT_XRGB32`` - 'BX24' + - - - @@ -497,8 +507,7 @@ next to each other in memory. - - - - - - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -507,7 +516,7 @@ next to each other in memory. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -516,7 +525,7 @@ next to each other in memory. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -528,7 +537,7 @@ next to each other in memory. .. raw:: latex - \end{adjustbox}\newline\newline + \endgroup .. note:: Bit 7 is the most significant bit. @@ -562,9 +571,9 @@ Each cell is one byte. .. raw:: latex - \newline\newline\begin{adjustbox}{width=\columnwidth} + \small -.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.1cm}|p{1.3cm}| +.. tabularcolumns:: |p{3.1cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}| .. flat-table:: RGB byte order :header-rows: 0 @@ -626,19 +635,21 @@ Each cell is one byte. .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize Formats defined in :ref:`rgb-formats-deprecated` are deprecated and must not be used by new drivers. They are documented here for reference. -The meaning of their alpha bits (a) is ill-defined and interpreted as in +The meaning of their alpha bits ``(a)`` are ill-defined and interpreted as in either the corresponding ARGB or XRGB format, depending on the driver. .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{4.2cm}|p{1.0cm}|p{0.7cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{1.7cm}| +.. tabularcolumns:: |p{2.2cm}|p{0.60cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _rgb-formats-deprecated: @@ -648,17 +659,15 @@ either the corresponding ARGB or XRGB format, depending on the driver. * - Identifier - Code - - - :cspan:`7` Byte 0 in memory - - + - :cspan:`7` Byte 1 - - + - :cspan:`7` Byte 2 - - + - :cspan:`7` Byte 3 * - - - - Bit - 7 - 6 - 5 @@ -667,7 +676,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -676,7 +685,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -685,7 +694,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -698,7 +707,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - ``V4L2_PIX_FMT_RGB444`` - 'R444' - - + - g\ :sub:`3` - g\ :sub:`2` - g\ :sub:`1` @@ -707,7 +716,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - a\ :sub:`3` - a\ :sub:`2` - a\ :sub:`1` @@ -716,11 +725,12 @@ either the corresponding ARGB or XRGB format, depending on the driver. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` + - * .. _V4L2-PIX-FMT-RGB555: - ``V4L2_PIX_FMT_RGB555`` - 'RGBO' - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -729,7 +739,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - a - r\ :sub:`4` - r\ :sub:`3` @@ -738,11 +748,12 @@ either the corresponding ARGB or XRGB format, depending on the driver. - r\ :sub:`0` - g\ :sub:`4` - g\ :sub:`3` + - * .. _V4L2-PIX-FMT-RGB555X: - ``V4L2_PIX_FMT_RGB555X`` - 'RGBQ' - - + - a - r\ :sub:`4` - r\ :sub:`3` @@ -751,7 +762,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - r\ :sub:`0` - g\ :sub:`4` - g\ :sub:`3` - - + - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` @@ -760,11 +771,12 @@ either the corresponding ARGB or XRGB format, depending on the driver. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + - * .. _V4L2-PIX-FMT-BGR32: - ``V4L2_PIX_FMT_BGR32`` - 'BGR4' - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -773,7 +785,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -782,7 +794,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -791,7 +803,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - a\ :sub:`7` - a\ :sub:`6` - a\ :sub:`5` @@ -804,7 +816,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - ``V4L2_PIX_FMT_RGB32`` - 'RGB4' - - + - a\ :sub:`7` - a\ :sub:`6` - a\ :sub:`5` @@ -813,7 +825,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - a\ :sub:`2` - a\ :sub:`1` - a\ :sub:`0` - - + - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -822,7 +834,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - r\ :sub:`2` - r\ :sub:`1` - r\ :sub:`0` - - + - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -831,7 +843,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. - g\ :sub:`2` - g\ :sub:`1` - g\ :sub:`0` - - + - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -843,7 +855,7 @@ either the corresponding ARGB or XRGB format, depending on the driver. .. raw:: latex - \end{adjustbox}\newline\newline + \endgroup A test utility to determine which RGB formats a driver actually supports is available from the LinuxTV v4l-dvb repository. See diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst index ebc8fcc937ad..d7644b411ccc 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst @@ -12,13 +12,16 @@ Description Similar to the packed RGB formats these formats store the Y, Cb and Cr component of each pixel in one 16 or 32 bit word. + .. raw:: latex - \newline\newline\begin{adjustbox}{width=\columnwidth} + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} .. _packed-yuv-formats: -.. tabularcolumns:: |p{4.5cm}|p{3.3cm}|p{0.7cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{1.7cm}| +.. tabularcolumns:: |p{2.0cm}|p{0.67cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}|p{0.29cm}| .. flat-table:: Packed YUV Image Formats :header-rows: 2 @@ -26,17 +29,16 @@ component of each pixel in one 16 or 32 bit word. * - Identifier - Code - - + - :cspan:`7` Byte 0 in memory - - + - :cspan:`7` Byte 1 - - + - :cspan:`7` Byte 2 - - + - :cspan:`7` Byte 3 * - - - - Bit - 7 - 6 - 5 @@ -45,7 +47,7 @@ component of each pixel in one 16 or 32 bit word. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -54,7 +56,7 @@ component of each pixel in one 16 or 32 bit word. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -63,7 +65,7 @@ component of each pixel in one 16 or 32 bit word. - 2 - 1 - 0 - - + - 7 - 6 - 5 @@ -76,7 +78,7 @@ component of each pixel in one 16 or 32 bit word. - ``V4L2_PIX_FMT_YUV444`` - 'Y444' - - + - Cb\ :sub:`3` - Cb\ :sub:`2` - Cb\ :sub:`1` @@ -85,7 +87,7 @@ component of each pixel in one 16 or 32 bit word. - Cr\ :sub:`2` - Cr\ :sub:`1` - Cr\ :sub:`0` - - + - a\ :sub:`3` - a\ :sub:`2` - a\ :sub:`1` @@ -94,11 +96,12 @@ component of each pixel in one 16 or 32 bit word. - Y'\ :sub:`2` - Y'\ :sub:`1` - Y'\ :sub:`0` + - * .. _V4L2-PIX-FMT-YUV555: - ``V4L2_PIX_FMT_YUV555`` - 'YUVO' - - + - Cb\ :sub:`2` - Cb\ :sub:`1` - Cb\ :sub:`0` @@ -107,7 +110,7 @@ component of each pixel in one 16 or 32 bit word. - Cr\ :sub:`2` - Cr\ :sub:`1` - Cr\ :sub:`0` - - + - a - Y'\ :sub:`4` - Y'\ :sub:`3` @@ -116,11 +119,12 @@ component of each pixel in one 16 or 32 bit word. - Y'\ :sub:`0` - Cb\ :sub:`4` - Cb\ :sub:`3` + - * .. _V4L2-PIX-FMT-YUV565: - ``V4L2_PIX_FMT_YUV565`` - 'YUVP' - - + - Cb\ :sub:`2` - Cb\ :sub:`1` - Cb\ :sub:`0` @@ -129,7 +133,7 @@ component of each pixel in one 16 or 32 bit word. - Cr\ :sub:`2` - Cr\ :sub:`1` - Cr\ :sub:`0` - - + - Y'\ :sub:`4` - Y'\ :sub:`3` - Y'\ :sub:`2` @@ -138,11 +142,12 @@ component of each pixel in one 16 or 32 bit word. - Cb\ :sub:`5` - Cb\ :sub:`4` - Cb\ :sub:`3` + - * .. _V4L2-PIX-FMT-YUV32: - ``V4L2_PIX_FMT_YUV32`` - 'YUV4' - - + - a\ :sub:`7` - a\ :sub:`6` - a\ :sub:`5` @@ -151,7 +156,7 @@ component of each pixel in one 16 or 32 bit word. - a\ :sub:`2` - a\ :sub:`1` - a\ :sub:`0` - - + - Y'\ :sub:`7` - Y'\ :sub:`6` - Y'\ :sub:`5` @@ -160,7 +165,7 @@ component of each pixel in one 16 or 32 bit word. - Y'\ :sub:`2` - Y'\ :sub:`1` - Y'\ :sub:`0` - - + - Cb\ :sub:`7` - Cb\ :sub:`6` - Cb\ :sub:`5` @@ -169,7 +174,7 @@ component of each pixel in one 16 or 32 bit word. - Cb\ :sub:`2` - Cb\ :sub:`1` - Cb\ :sub:`0` - - + - Cr\ :sub:`7` - Cr\ :sub:`6` - Cr\ :sub:`5` @@ -181,7 +186,7 @@ component of each pixel in one 16 or 32 bit word. .. raw:: latex - \end{adjustbox}\newline\newline + \endgroup .. note:: diff --git a/Documentation/media/uapi/v4l/pixfmt-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-rgb.rst index b0f35136021e..4cc27195dc79 100644 --- a/Documentation/media/uapi/v4l/pixfmt-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-rgb.rst @@ -17,4 +17,5 @@ RGB Formats pixfmt-srggb10alaw8 pixfmt-srggb10dpcm8 pixfmt-srggb12 + pixfmt-srggb12p pixfmt-srggb16 diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst index b6d426c70ccd..d9e07a4b8b31 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst @@ -33,11 +33,7 @@ of a small V4L2_PIX_FMT_SBGGR10P image: **Byte Order.** Each cell is one byte. -.. raw:: latex - - \newline\newline\begin{adjustbox}{width=\columnwidth} - -.. tabularcolumns:: |p{2.0cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|p{10.9cm}| +.. tabularcolumns:: |p{2.0cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{5.4cm}| .. flat-table:: :header-rows: 0 @@ -50,6 +46,7 @@ Each cell is one byte. - B\ :sub:`02high` - G\ :sub:`03high` - G\ :sub:`03low`\ (bits 7--6) B\ :sub:`02low`\ (bits 5--4) + G\ :sub:`01low`\ (bits 3--2) B\ :sub:`00low`\ (bits 1--0) * - start + 5: - G\ :sub:`10high` @@ -57,6 +54,7 @@ Each cell is one byte. - G\ :sub:`12high` - R\ :sub:`13high` - R\ :sub:`13low`\ (bits 7--6) G\ :sub:`12low`\ (bits 5--4) + R\ :sub:`11low`\ (bits 3--2) G\ :sub:`10low`\ (bits 1--0) * - start + 10: - B\ :sub:`20high` @@ -64,6 +62,7 @@ Each cell is one byte. - B\ :sub:`22high` - G\ :sub:`23high` - G\ :sub:`23low`\ (bits 7--6) B\ :sub:`22low`\ (bits 5--4) + G\ :sub:`21low`\ (bits 3--2) B\ :sub:`20low`\ (bits 1--0) * - start + 15: - G\ :sub:`30high` @@ -71,8 +70,5 @@ Each cell is one byte. - G\ :sub:`32high` - R\ :sub:`33high` - R\ :sub:`33low`\ (bits 7--6) G\ :sub:`32low`\ (bits 5--4) - R\ :sub:`31low`\ (bits 3--2) G\ :sub:`30low`\ (bits 1--0) -.. raw:: latex - - \end{adjustbox}\newline\newline + R\ :sub:`31low`\ (bits 3--2) G\ :sub:`30low`\ (bits 1--0) diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst new file mode 100644 index 000000000000..59918a7913fe --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst @@ -0,0 +1,86 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _V4L2-PIX-FMT-SRGGB12P: +.. _v4l2-pix-fmt-sbggr12p: +.. _v4l2-pix-fmt-sgbrg12p: +.. _v4l2-pix-fmt-sgrbg12p: + +******************************************************************************************************************************* +V4L2_PIX_FMT_SRGGB12P ('pRAA'), V4L2_PIX_FMT_SGRBG12P ('pgAA'), V4L2_PIX_FMT_SGBRG12P ('pGAA'), V4L2_PIX_FMT_SBGGR12P ('pBAA'), +******************************************************************************************************************************* + + +12-bit packed Bayer formats + + +Description +=========== + +These four pixel formats are packed raw sRGB / Bayer formats with 12 +bits per colour. Every two consecutive samples are packed into three +bytes. Each of the first two bytes contain the 8 high order bits of +the pixels, and the third byte contains the four least significants +bits of each pixel, in the same order. + +Each n-pixel row contains n/2 green samples and n/2 blue or red +samples, with alternating green-red and green-blue rows. They are +conventionally described as GRGR... BGBG..., RGRG... GBGB..., etc. +Below is an example of a small V4L2_PIX_FMT_SBGGR12P image: + +**Byte Order.** +Each cell is one byte. + +.. tabularcolumns:: |p{2.0cm}|p{1.0cm}|p{1.0cm}|p{2.7cm}|p{1.0cm}|p{1.0cm}|p{2.7cm}| + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 2 1 1 1 1 1 1 + + + - - start + 0: + - B\ :sub:`00high` + - G\ :sub:`01high` + - G\ :sub:`01low`\ (bits 7--4) + + B\ :sub:`00low`\ (bits 3--0) + - B\ :sub:`02high` + - G\ :sub:`03high` + - G\ :sub:`03low`\ (bits 7--4) + + B\ :sub:`02low`\ (bits 3--0) + + - - start + 6: + - G\ :sub:`10high` + - R\ :sub:`11high` + - R\ :sub:`11low`\ (bits 7--4) + + G\ :sub:`10low`\ (bits 3--0) + - G\ :sub:`12high` + - R\ :sub:`13high` + - R\ :sub:`13low`\ (bits 3--2) + + G\ :sub:`12low`\ (bits 3--0) + - - start + 12: + - B\ :sub:`20high` + - G\ :sub:`21high` + - G\ :sub:`21low`\ (bits 7--4) + + B\ :sub:`20low`\ (bits 3--0) + - B\ :sub:`22high` + - G\ :sub:`23high` + - G\ :sub:`23low`\ (bits 7--4) + + B\ :sub:`22low`\ (bits 3--0) + - - start + 18: + - G\ :sub:`30high` + - R\ :sub:`31high` + - R\ :sub:`31low`\ (bits 7--4) + + G\ :sub:`30low`\ (bits 3--0) + - G\ :sub:`32high` + - R\ :sub:`33high` + - R\ :sub:`33low`\ (bits 3--2) + + G\ :sub:`32low`\ (bits 3--0) diff --git a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst index 30660e04dd0e..ecdc2d94c209 100644 --- a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst +++ b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst @@ -65,7 +65,7 @@ Each cell is one byte. - Y'\ :sub:`33` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-003.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst index 337e8188caf1..337e8188caf1 100644 --- a/Documentation/media/uapi/v4l/pixfmt-003.rst +++ b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst diff --git a/Documentation/media/uapi/v4l/pixfmt-002.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst index 2ee164c25637..2ee164c25637 100644 --- a/Documentation/media/uapi/v4l/pixfmt-002.rst +++ b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst diff --git a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst index a3f61f280b94..670c339c1714 100644 --- a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst +++ b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst @@ -65,7 +65,7 @@ Each cell is one byte. - Y'\ :sub:`33` -**Color Sample Location..** +**Color Sample Location:** .. flat-table:: :header-rows: 0 diff --git a/Documentation/media/uapi/v4l/pixfmt-y41p.rst b/Documentation/media/uapi/v4l/pixfmt-y41p.rst index 05d040c46a47..e1fe548807a4 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y41p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y41p.rst @@ -88,7 +88,7 @@ Each cell is one byte. - Y'\ :sub:`37` -**Color Sample Location..** +**Color Sample Location:** .. flat-table:: :header-rows: 0 diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst index 0c49915af850..b51a0d1c6108 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst @@ -67,7 +67,7 @@ Each cell is one byte. - Cb\ :sub:`00` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst index 2cf33fad7254..2582341972db 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst @@ -75,7 +75,7 @@ Each cell is one byte. - Cr\ :sub:`30` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst index fd98904058ed..a9b85c4b1dbc 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst @@ -76,7 +76,7 @@ Each cell is one byte. - Cb\ :sub:`11` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst index cce8c477fdfc..32c68c33f2b1 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst @@ -85,7 +85,7 @@ Each cell is one byte. - Cr\ :sub:`11` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst index d986393aa934..9e7028c4967c 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst @@ -96,7 +96,7 @@ Each cell is one byte. - Cr\ :sub:`31` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst index e6f5de546dba..a96f836c7fa5 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst @@ -84,7 +84,7 @@ Each cell is one byte. - Cr\ :sub:`31` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst index 830fbf6fcd1d..8605bfaee112 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst @@ -106,7 +106,7 @@ Each cell is one byte. - Cr\ :sub:`33` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst index e1bdd6b1aefc..53e876d053fb 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst @@ -68,7 +68,7 @@ Each cell is one byte. - Cr\ :sub:`31` -**Color Sample Location..** +**Color Sample Location:** diff --git a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst index 0244ce6741a6..b9c31746e565 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst @@ -65,7 +65,7 @@ Each cell is one byte. - Cb\ :sub:`31` -**Color Sample Location..** +**Color Sample Location:** .. flat-table:: :header-rows: 0 diff --git a/Documentation/media/uapi/v4l/pixfmt.rst b/Documentation/media/uapi/v4l/pixfmt.rst index 00737152497b..2aa449e2da67 100644 --- a/Documentation/media/uapi/v4l/pixfmt.rst +++ b/Documentation/media/uapi/v4l/pixfmt.rst @@ -19,20 +19,19 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.) .. toctree:: :maxdepth: 1 - pixfmt-002 - pixfmt-003 - pixfmt-004 - colorspaces - pixfmt-006 - pixfmt-007 - pixfmt-008 + pixfmt-v4l2 + pixfmt-v4l2-mplane + pixfmt-intro pixfmt-indexed pixfmt-rgb yuv-formats hsv-formats depth-formats - pixfmt-013 + pixfmt-compressed sdr-formats tch-formats meta-formats pixfmt-reserved + colorspaces + colorspaces-defs + colorspaces-details diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst index 8e73bb00c0d5..b1eea44550e1 100644 --- a/Documentation/media/uapi/v4l/subdev-formats.rst +++ b/Documentation/media/uapi/v4l/subdev-formats.rst @@ -1586,7 +1586,7 @@ JEIDA defined bit mapping will be named .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \tiny .. _v4l2-mbus-pixelcode-rgb-lvds: @@ -1784,7 +1784,7 @@ JEIDA defined bit mapping will be named .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize Bayer Formats @@ -7321,11 +7321,14 @@ following information. The following table lists existing HSV/HSL formats. + .. raw:: latex - \newline\newline\begin{adjustbox}{width=\columnwidth} + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{6.2cm}|p{1.6cm}|p{0.7cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}| +.. tabularcolumns:: |p{3.0cm}|p{0.60cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-hsv: @@ -7413,7 +7416,7 @@ The following table lists existing HSV/HSL formats. .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize JPEG Compressed Formats @@ -7435,7 +7438,7 @@ The following table lists existing JPEG compressed formats. .. _v4l2-mbus-pixelcode-jpeg: -.. tabularcolumns:: |p{5.6cm}|p{1.2cm}|p{10.7cm}| +.. tabularcolumns:: |p{5.4cm}|p{1.4cm}|p{10.7cm}| .. flat-table:: JPEG Formats :header-rows: 1 @@ -7468,7 +7471,7 @@ formats. .. _v4l2-mbus-pixelcode-vendor-specific: -.. tabularcolumns:: |p{6.6cm}|p{1.2cm}|p{9.7cm}| +.. tabularcolumns:: |p{6.8cm}|p{1.4cm}|p{9.3cm}| .. flat-table:: Vendor and device specific formats :header-rows: 1 diff --git a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst index cab07de6f4da..87433ec76c6b 100644 --- a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst +++ b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst @@ -12,7 +12,7 @@ of the two interfaces they are used. .. _v4l2-selection-targets-table: -.. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{6.5cm}|p{1.2cm}|p{1.6cm}| +.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{7.4cm}|p{1.2cm}|p{1.4cm}| .. flat-table:: Selection target definitions :header-rows: 1 diff --git a/Documentation/media/uapi/v4l/v4l2.rst b/Documentation/media/uapi/v4l/v4l2.rst index f52a11c949d3..2128717299b3 100644 --- a/Documentation/media/uapi/v4l/v4l2.rst +++ b/Documentation/media/uapi/v4l/v4l2.rst @@ -11,7 +11,9 @@ This part describes the Video for Linux API version 2 (V4L2 API) specification. **Revision 4.5** -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents @@ -23,7 +25,6 @@ This part describes the Video for Linux API version 2 (V4L2 API) specification. pixfmt io devices - driver libv4l compat user-func diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst index aaca12fca06e..a39e18d69511 100644 --- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_create_buffers`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst b/Documentation/media/uapi/v4l/vidioc-cropcap.rst index 0f80d5ca2643..a65dbec6b20b 100644 --- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst +++ b/Documentation/media/uapi/v4l/vidioc-cropcap.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_cropcap`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst index e1e5507e79ff..7709852282c2 100644 --- a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst +++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_dbg_chip_info`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst index 5960a6547f41..f4e8dd5f7889 100644 --- a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst +++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_dbg_register`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst index 8d663a73818e..cb3565f36793 100644 --- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst +++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_event`. Description @@ -38,7 +39,7 @@ exceptions which the application may get by e.g. using the select system call. -.. tabularcolumns:: |p{3.0cm}|p{4.3cm}|p{2.5cm}|p{7.7cm}| +.. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}| .. c:type:: v4l2_event diff --git a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst index 424f3a1c7f56..63ead6b7a115 100644 --- a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst +++ b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_dv_timings_cap`. Description @@ -97,7 +98,7 @@ that doesn't support them will return an ``EINVAL`` error code. -.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{3.5cm}|p{9.5cm}| +.. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}| .. c:type:: v4l2_dv_timings_cap diff --git a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst index ae20ee573757..5ae8c933b1b9 100644 --- a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst +++ b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst @@ -29,7 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` - + Pointer to struct :c:type:`v4l2_encoder_cmd`. Description =========== diff --git a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst index 3e9d0f69cc73..63dca65f49e4 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_enum_dv_timings`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst index a2adaa4bd4dd..019c513df217 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_fmtdesc`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst index 39492453f02d..fea7dc3c879d 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst @@ -26,9 +26,8 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` - Pointer to a struct :c:type:`v4l2_frmivalenum` - structure that contains a pixel format and size and receives a frame - interval. + Pointer to struct :c:type:`v4l2_frmivalenum` + that contains a pixel format and size and receives a frame interval. Description @@ -124,6 +123,8 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmivalenum +.. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}| + .. flat-table:: struct v4l2_frmivalenum :header-rows: 0 :stub-columns: 0 diff --git a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst index 628f1aa66338..6de117f163e0 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst @@ -26,7 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` - Pointer to a struct :c:type:`v4l2_frmsizeenum` + Pointer to struct :c:type:`v4l2_frmsizeenum` that contains an index and pixel format and receives a frame width and height. @@ -140,6 +140,8 @@ application should zero out all members except for the *IN* fields. .. c:type:: v4l2_frmsizeenum +.. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}| + .. flat-table:: struct v4l2_frmsizeenum :header-rows: 0 :stub-columns: 0 diff --git a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst index 4e5f5e5bf632..195cf45f3c32 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_frequency_band`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst index 74bc3ed0bdd8..8e5193e8696f 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_audio`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst index 4470a1ece5cf..6d2b4f6e78b0 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_audioout`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enuminput.rst b/Documentation/media/uapi/v4l/vidioc-enuminput.rst index 266e48ab237f..0350069a56c5 100644 --- a/Documentation/media/uapi/v4l/vidioc-enuminput.rst +++ b/Documentation/media/uapi/v4l/vidioc-enuminput.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_input`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst index 93a2cf3b310c..697dcd186ae3 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_output`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst b/Documentation/media/uapi/v4l/vidioc-enumstd.rst index f2bdd45cfa0d..b7fda29f46a1 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumstd.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumstd.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_standard`. Description @@ -224,12 +225,15 @@ support digital TV. See also the Linux DVB API at #define V4L2_STD_ALL (V4L2_STD_525_60 | V4L2_STD_625_50) + .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} .. NTSC/M PAL/M /N /B /D /H /I SECAM/B /D /K1 /L -.. tabularcolumns:: |p{2.7cm}|p{2.6cm}|p{3.0cm}|p{3.2cm}|p{3.2cm}|p{2.2cm}|p{1.2cm}|p{3.2cm}|p{3.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}| +.. tabularcolumns:: |p{1.43cm}|p{1.38cm}|p{1.59cm}|p{1.7cm}|p{1.7cm}|p{1.17cm}|p{0.64cm}|p{1.71cm}|p{1.6cm}|p{1.07cm}|p{1.07cm}|p{1.07cm}| .. _video-standards: @@ -293,7 +297,7 @@ support digital TV. See also the Linux DVB API at .. raw:: latex - \end{adjustbox}\newline\newline + \endgroup diff --git a/Documentation/media/uapi/v4l/vidioc-expbuf.rst b/Documentation/media/uapi/v4l/vidioc-expbuf.rst index 246e48028d40..226e83eb28a9 100644 --- a/Documentation/media/uapi/v4l/vidioc-expbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-expbuf.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_exportbuffer`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-audio.rst b/Documentation/media/uapi/v4l/vidioc-g-audio.rst index 5b67e81a0db6..290851f99386 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-audio.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-audio.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_audio`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst index d16ecbaddc59..1c98af33ee70 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_audioout`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-g-crop.rst index 13771ee3e94a..a6ed43ba9ca3 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-crop.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_crop`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst index d8a379182a34..299b9aabbac2 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_control`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index e573c74138de..2696380626d4 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -35,6 +35,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_dv_timings`. Description @@ -208,7 +209,7 @@ EBUSY - 0 - BT.656/1120 timings - +.. tabularcolumns:: |p{4.5cm}|p{12.8cm}| .. _dv-bt-standards: @@ -231,7 +232,7 @@ EBUSY There are no horizontal syncs/porches at all in this format. Total blanking timings must be set in hsync or vsync fields only. -.. tabularcolumns:: |p{6.0cm}|p{11.5cm}| +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| .. _dv-bt-flags: diff --git a/Documentation/media/uapi/v4l/vidioc-g-edid.rst b/Documentation/media/uapi/v4l/vidioc-g-edid.rst index a16a193a1cbf..acab90f06e5a 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-edid.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-edid.rst @@ -36,6 +36,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_edid`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst index 418e886fd44b..9dfe64fc21a4 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_enc_idx`. Description @@ -55,7 +56,7 @@ Currently this ioctl is only defined for MPEG-2 program streams and video elementary streams. -.. tabularcolumns:: |p{3.5cm}|p{5.6cm}|p{8.4cm}| +.. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}| .. c:type:: v4l2_enc_idx diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst index 5ab8d2ac27b9..2011c2b2ee67 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst @@ -34,6 +34,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_ext_controls`. Description @@ -180,7 +181,7 @@ still cause this situation. ``V4L2_CTRL_FLAG_HAS_PAYLOAD`` is set for this control. -.. tabularcolumns:: |p{4.0cm}|p{2.0cm}|p{2.0cm}|p{8.5cm}| +.. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}| .. c:type:: v4l2_ext_controls diff --git a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst index 4a6a03d158ca..fc73bf0f6052 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_framebuffer`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst index d082f9a21548..3ead350e099f 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst @@ -31,6 +31,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_format`. Description @@ -87,7 +88,7 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical .. c:type:: v4l2_format -.. tabularcolumns:: |p{1.2cm}|p{4.3cm}|p{3.0cm}|p{9.0cm}| +.. tabularcolumns:: |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}| .. flat-table:: struct v4l2_format :header-rows: 0 diff --git a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst index 46ab276f412b..c1cccb144660 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_frequency`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-input.rst b/Documentation/media/uapi/v4l/vidioc-g-input.rst index 1364a918fbce..1dcef44eef02 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-input.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-input.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer an integer with input index. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst index 8ba353067b33..a1773ea9543e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_jpegcompression`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst index 77d017eb3fcc..a47b6a15cfbe 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_modulator`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-output.rst b/Documentation/media/uapi/v4l/vidioc-g-output.rst index 7750948fc61b..3e0093f66834 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-output.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-output.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to an integer with output index. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-parm.rst b/Documentation/media/uapi/v4l/vidioc-g-parm.rst index 3b2e6e59a334..616a5ea3f8fa 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-parm.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-parm.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_streamparm`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-priority.rst b/Documentation/media/uapi/v4l/vidioc-g-priority.rst index a763988f64e4..c28996b4a45c 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-priority.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-priority.rst @@ -29,7 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` - Pointer to an enum v4l2_priority type. + Pointer to an enum :c:type:`v4l2_priority` type. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-g-selection.rst index c1ee86472918..f1d9df029e0d 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-selection.rst @@ -29,11 +29,8 @@ Arguments ``fd`` File descriptor returned by :ref:`open() <func-open>`. -``request`` - VIDIOC_G_SELECTION, VIDIOC_S_SELECTION - ``argp`` - + Pointer to struct :c:type:`v4l2_selection`. Description =========== diff --git a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst index d7e2b2fa8b88..a9633cae76c5 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_sliced_vbi_cap`. Description @@ -122,9 +123,9 @@ the sliced VBI API is unsupported or ``type`` is invalid. .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \scriptsize -.. tabularcolumns:: |p{5.0cm}|p{1.4cm}|p{3.0cm}|p{2.5cm}|p{9.0cm}| +.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.0cm}| .. _vbi-services: @@ -180,7 +181,7 @@ the sliced VBI API is unsupported or ``type`` is invalid. .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize Return Value diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst index cd856ad21a28..90791ab51a53 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-std.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-std.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to :c:type:`v4l2_std_id`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst index 57c79fa43866..acdd15901a51 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_tuner`. Description @@ -392,22 +393,25 @@ To change the radio frequency the .. raw:: latex - \begin{adjustbox}{width=\columnwidth} + \scriptsize + +.. tabularcolumns:: |p{1.5cm}|p{1.5cm}|p{2.9cm}|p{2.9cm}|p{2.9cm}|p{2.9cm}| .. _tuner-matrix: .. flat-table:: Tuner Audio Matrix :header-rows: 2 :stub-columns: 0 + :widths: 7 7 14 14 14 14 * - - - :cspan:`5` Selected ``V4L2_TUNER_MODE_`` + - :cspan:`4` Selected ``V4L2_TUNER_MODE_`` * - Received ``V4L2_TUNER_SUB_`` - ``MONO`` - ``STEREO`` - ``LANG1`` - ``LANG2 = SAP`` - - ``LANG1_LANG2``\ [#f1]_ + - ``LANG1_LANG2``\ [#f1]_ * - ``MONO`` - Mono - Mono/Mono @@ -434,14 +438,14 @@ To change the radio frequency the - L+R/SAP (preferred) or L/R or L+R/L+R * - ``LANG1 | LANG2`` - Language 1 - - Lang1/Lang2 (deprecated [#f2]_) or Lang1/Lang1 + - Lang1/Lang2 (deprecated\ [#f2]_) or Lang1/Lang1 - Language 1 - Language 2 - Lang1/Lang2 (preferred) or Lang1/Lang1 .. raw:: latex - \end{adjustbox}\newline\newline + \normalsize Return Value ============ diff --git a/Documentation/media/uapi/v4l/vidioc-overlay.rst b/Documentation/media/uapi/v4l/vidioc-overlay.rst index cd7b62ebc53b..1383e3db25fc 100644 --- a/Documentation/media/uapi/v4l/vidioc-overlay.rst +++ b/Documentation/media/uapi/v4l/vidioc-overlay.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to an integer. Description diff --git a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst index bdcfd9fe550d..70687a86ae38 100644 --- a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst +++ b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_buffer`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst index 1f3612637200..9e448a4aa3aa 100644 --- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_buffer`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst index 0d16853b1b51..6c82eafd28bb 100644 --- a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_dv_timings`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-querybuf.rst b/Documentation/media/uapi/v4l/vidioc-querybuf.rst index 0bdc8e0abddc..dd54747fabc9 100644 --- a/Documentation/media/uapi/v4l/vidioc-querybuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-querybuf.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_buffer`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-querycap.rst b/Documentation/media/uapi/v4l/vidioc-querycap.rst index 12e0d9a63cd8..66fb1b3d6e6e 100644 --- a/Documentation/media/uapi/v4l/vidioc-querycap.rst +++ b/Documentation/media/uapi/v4l/vidioc-querycap.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_capability`. Description @@ -91,12 +92,13 @@ specification the ioctl returns an ``EINVAL`` error code. stack from a newer kernel. The version number is formatted using the ``KERNEL_VERSION()`` - macro: + macro. For example if the media stack corresponds to the V4L2 + version shipped with Kernel 4.14, it would be equivalent to: * - :cspan:`2` ``#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))`` - ``__u32 version = KERNEL_VERSION(0, 8, 1);`` + ``__u32 version = KERNEL_VERSION(4, 14, 0);`` ``printf ("Version: %u.%u.%u\\n",`` @@ -131,7 +133,7 @@ specification the ioctl returns an ``EINVAL`` error code. -.. tabularcolumns:: |p{6cm}|p{2.2cm}|p{8.8cm}| +.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| .. _device-capabilities: diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst index 41c5744a1239..5bd26e8c9a1a 100644 --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst @@ -32,6 +32,8 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_queryctl`, :c:type:`v4l2_query_ext_ctrl` + or :c:type`v4l2_querymenu` (depending on the ioctl). Description @@ -274,7 +276,7 @@ See also the examples in :ref:`control`. -.. tabularcolumns:: |p{1.2cm}|p{0.6cm}|p{1.6cm}|p{13.5cm}| +.. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}| .. _v4l2-querymenu: diff --git a/Documentation/media/uapi/v4l/vidioc-querystd.rst b/Documentation/media/uapi/v4l/vidioc-querystd.rst index 3ef9ab37f582..cf40bca19b9f 100644 --- a/Documentation/media/uapi/v4l/vidioc-querystd.rst +++ b/Documentation/media/uapi/v4l/vidioc-querystd.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to :c:type:`v4l2_std_id`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst index a4180d576ee5..316f52c8a310 100644 --- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst @@ -26,7 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` - + Pointer to struct :c:type:`v4l2_requestbuffers`. Description =========== diff --git a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst index 5672ca48d2bd..b318cb8e1df3 100644 --- a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst +++ b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_hw_freq_seek`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-streamon.rst b/Documentation/media/uapi/v4l/vidioc-streamon.rst index 972d5b3c74aa..e851a6961b78 100644 --- a/Documentation/media/uapi/v4l/vidioc-streamon.rst +++ b/Documentation/media/uapi/v4l/vidioc-streamon.rst @@ -29,7 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` - + Pointer to an integer. Description =========== diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst index 1a02c935c8b5..1bfe3865dcc2 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_frame_interval_enum`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst index 746c24ed97a0..33fdc3ac9316 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_frame_size_enum`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst index 0dfee3829ee2..4e4291798e4b 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst @@ -26,6 +26,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_mbus_code_enum`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst index 000e8fcd3f25..69b2ae8e7c15 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_crop`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst index b352456dfe2c..81c5d331af9a 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_format`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst index 46159dcfce30..5af0a7179941 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_frame_interval`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst index 071d9c033db6..b1d3dbbef42a 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst @@ -29,6 +29,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_subdev_selection`. Description diff --git a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst index e4a51431032c..b521efa53ceb 100644 --- a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst +++ b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst @@ -30,6 +30,7 @@ Arguments File descriptor returned by :ref:`open() <func-open>`. ``argp`` + Pointer to struct :c:type:`v4l2_event_subscription`. Description @@ -39,7 +40,7 @@ Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by using the :ref:`VIDIOC_DQEVENT` ioctl. -.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| +.. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}| .. c:type:: v4l2_event_subscription @@ -72,7 +73,7 @@ using the :ref:`VIDIOC_DQEVENT` ioctl. -.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| +.. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}| .. _event-flags: diff --git a/Documentation/media/v4l-drivers/au0828-cardlist.rst b/Documentation/media/v4l-drivers/au0828-cardlist.rst index 82d2567bc7c1..bb87b7b36a83 100644 --- a/Documentation/media/v4l-drivers/au0828-cardlist.rst +++ b/Documentation/media/v4l-drivers/au0828-cardlist.rst @@ -1,13 +1,37 @@ AU0828 cards list ================= -=========== ========================== ======================================================================================================================= -Card number Card name USB IDs -=========== ========================== ======================================================================================================================= -0 Unknown board -1 Hauppauge HVR950Q 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270 -2 Hauppauge HVR850 2040:7240 -3 DViCO FusionHDTV USB 0fe9:d620 -4 Hauppauge HVR950Q rev xxF8 2040:7201, 2040:7211, 2040:7281 -5 Hauppauge Woodbury 05e1:0480, 2040:8200 -=========== ========================== ======================================================================================================================= +.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{10.0cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - USB IDs + + * - 0 + - Unknown board + - + + * - 1 + - Hauppauge HVR950Q + - 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270 + + * - 2 + - Hauppauge HVR850 + - 2040:7240 + + * - 3 + - DViCO FusionHDTV USB + - 0fe9:d620 + + * - 4 + - Hauppauge HVR950Q rev xxF8 + - 2040:7201, 2040:7211, 2040:7281 + + * - 5 + - Hauppauge Woodbury + - 05e1:0480, 2040:8200 diff --git a/Documentation/media/v4l-drivers/bttv-cardlist.rst b/Documentation/media/v4l-drivers/bttv-cardlist.rst index 28a01cd6cf2e..8da27b924e01 100644 --- a/Documentation/media/v4l-drivers/bttv-cardlist.rst +++ b/Documentation/media/v4l-drivers/bttv-cardlist.rst @@ -1,174 +1,681 @@ BTTV cards list =============== -=========== ================================================================================= ============================================================================================================================================================================== -Card number Card name PCI IDs -=========== ================================================================================= ============================================================================================================================================================================== -0 *** UNKNOWN/GENERIC *** -1 MIRO PCTV -2 Hauppauge (bt848) -3 STB, Gateway P/N 6000699 (bt848) -4 Intel Create and Share PCI/ Smart Video Recorder III -5 Diamond DTV2000 -6 AVerMedia TVPhone -7 MATRIX-Vision MV-Delta -8 Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 -9 IMS/IXmicro TurboTV -10 Hauppauge (bt878) 0070:13eb, 0070:3900, 2636:10b4 -11 MIRO PCTV pro -12 ADS Technologies Channel Surfer TV (bt848) -13 AVerMedia TVCapture 98 1461:0002, 1461:0004, 1461:0300 -14 Aimslab Video Highway Xtreme (VHX) -15 Zoltrix TV-Max a1a0:a0fc -16 Prolink Pixelview PlayTV (bt878) -17 Leadtek WinView 601 -18 AVEC Intercapture -19 Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) -20 CEI Raffles Card -21 Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 -22 Askey CPH050/ Phoebe Tv Master + FM 14ff:3002 -23 Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 14c7:0101 -24 Askey CPH05X/06X (bt878) [many vendors] 144f:3002, 144f:3005, 144f:5000, 14ff:3000 -25 Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar -26 Hauppauge WinCam newer (bt878) -27 Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 -28 Terratec TerraTV+ Version 1.1 (bt878) 153b:1127, 1852:1852 -29 Imagenation PXC200 1295:200a -30 Lifeview FlyVideo 98 LR50 1f7f:1850 -31 Formac iProTV, Formac ProTV I (bt848) -32 Intel Create and Share PCI/ Smart Video Recorder III -33 Terratec TerraTValue Version Bt878 153b:1117, 153b:1118, 153b:1119, 153b:111a, 153b:1134, 153b:5018 -34 Leadtek WinFast 2000/ WinFast 2000 XP 107d:6606, 107d:6609, 6606:217d, f6ff:fff6 -35 Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II 1851:1850, 1851:a050 -36 Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner 1852:1852 -37 Prolink PixelView PlayTV pro -38 Askey CPH06X TView99 144f:3000, 144f:a005, a04f:a0fc -39 Pinnacle PCTV Studio/Rave 11bd:0012, bd11:1200, bd11:ff00, 11bd:ff12 -40 STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 10b4:2636, 10b4:2645, 121a:3060 -41 AVerMedia TVPhone 98 1461:0001, 1461:0003 -42 ProVideo PV951 aa0c:146c -43 Little OnAir TV -44 Sigma TVII-FM -45 MATRIX-Vision MV-Delta 2 -46 Zoltrix Genie TV/FM 15b0:4000, 15b0:400a, 15b0:400d, 15b0:4010, 15b0:4016 -47 Terratec TV/Radio+ 153b:1123 -48 Askey CPH03x/ Dynalink Magic TView -49 IODATA GV-BCTV3/PCI 10fc:4020 -50 Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP -51 Eagle Wireless Capricorn2 (bt878A) -52 Pinnacle PCTV Studio Pro -53 Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS -54 Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] -55 Askey CPH031/ BESTBUY Easy TV -56 Lifeview FlyVideo 98FM LR50 a051:41a0 -57 GrandTec 'Grand Video Capture' (Bt848) 4344:4142 -58 Askey CPH060/ Phoebe TV Master Only (No FM) -59 Askey CPH03x TV Capturer -60 Modular Technology MM100PCTV -61 AG Electronics GMV1 15cb:0101 -62 Askey CPH061/ BESTBUY Easy TV (bt878) -63 ATI TV-Wonder 1002:0001 -64 ATI TV-Wonder VE 1002:0003 -65 Lifeview FlyVideo 2000S LR90 -66 Terratec TValueRadio 153b:1135, 153b:ff3b -67 IODATA GV-BCTV4/PCI 10fc:4050 -68 3Dfx VoodooTV FM (Euro) 10b4:2637 -69 Active Imaging AIMMS -70 Prolink Pixelview PV-BT878P+ (Rev.4C,8E) -71 Lifeview FlyVideo 98EZ (capture only) LR51 1851:1851 -72 Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) 1554:4011 -73 Sensoray 311/611 6000:0311, 6000:0611 -74 RemoteVision MX (RV605) -75 Powercolor MTV878/ MTV878R/ MTV878F -76 Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) 0e11:0079 -77 GrandTec Multi Capture Card (Bt878) -78 Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF 0a01:17de -79 DSP Design TCVIDEO -80 Hauppauge WinTV PVR 0070:4500 -81 IODATA GV-BCTV5/PCI 10fc:4070, 10fc:d018 -82 Osprey 100/150 (878) 0070:ff00 -83 Osprey 100/150 (848) -84 Osprey 101 (848) -85 Osprey 101/151 -86 Osprey 101/151 w/ svid -87 Osprey 200/201/250/251 -88 Osprey 200/250 0070:ff01 -89 Osprey 210/220/230 -90 Osprey 500 0070:ff02 -91 Osprey 540 0070:ff04 -92 Osprey 2000 0070:ff03 -93 IDS Eagle -94 Pinnacle PCTV Sat 11bd:001c -95 Formac ProTV II (bt878) -96 MachTV -97 Euresys Picolo -98 ProVideo PV150 aa00:1460, aa01:1461, aa02:1462, aa03:1463, aa04:1464, aa05:1465, aa06:1466, aa07:1467 -99 AD-TVK503 -100 Hercules Smart TV Stereo -101 Pace TV & Radio Card -102 IVC-200 0000:a155, 0001:a155, 0002:a155, 0003:a155, 0100:a155, 0101:a155, 0102:a155, 0103:a155, 0800:a155, 0801:a155, 0802:a155, 0803:a155 -103 Grand X-Guard / Trust 814PCI 0304:0102 -104 Nebula Electronics DigiTV 0071:0101 -105 ProVideo PV143 aa00:1430, aa00:1431, aa00:1432, aa00:1433, aa03:1433 -106 PHYTEC VD-009-X1 VD-011 MiniDIN (bt878) -107 PHYTEC VD-009-X1 VD-011 Combi (bt878) -108 PHYTEC VD-009 MiniDIN (bt878) -109 PHYTEC VD-009 Combi (bt878) -110 IVC-100 ff00:a132 -111 IVC-120G ff00:a182, ff01:a182, ff02:a182, ff03:a182, ff04:a182, ff05:a182, ff06:a182, ff07:a182, ff08:a182, ff09:a182, ff0a:a182, ff0b:a182, ff0c:a182, ff0d:a182, ff0e:a182, ff0f:a182 -112 pcHDTV HD-2000 TV 7063:2000 -113 Twinhan DST + clones 11bd:0026, 1822:0001, 270f:fc00, 1822:0026 -114 Winfast VC100 107d:6607 -115 Teppro TEV-560/InterVision IV-560 -116 SIMUS GVC1100 aa6a:82b2 -117 NGS NGSTV+ -118 LMLBT4 -119 Tekram M205 PRO -120 Conceptronic CONTVFMi -121 Euresys Picolo Tetra 1805:0105, 1805:0106, 1805:0107, 1805:0108 -122 Spirit TV Tuner -123 AVerMedia AVerTV DVB-T 771 1461:0771 -124 AverMedia AverTV DVB-T 761 1461:0761 -125 MATRIX Vision Sigma-SQ -126 MATRIX Vision Sigma-SLC -127 APAC Viewcomp 878(AMAX) -128 DViCO FusionHDTV DVB-T Lite 18ac:db10, 18ac:db11 -129 V-Gear MyVCD -130 Super TV Tuner -131 Tibet Systems 'Progress DVR' CS16 -132 Kodicom 4400R (master) -133 Kodicom 4400R (slave) -134 Adlink RTV24 -135 DViCO FusionHDTV 5 Lite 18ac:d500 -136 Acorp Y878F 9511:1540 -137 Conceptronic CTVFMi v2 036e:109e -138 Prolink Pixelview PV-BT878P+ (Rev.2E) -139 Prolink PixelView PlayTV MPEG2 PV-M4900 -140 Osprey 440 0070:ff07 -141 Asound Skyeye PCTV -142 Sabrent TV-FM (bttv version) -143 Hauppauge ImpactVCB (bt878) 0070:13eb -144 MagicTV -145 SSAI Security Video Interface 4149:5353 -146 SSAI Ultrasound Video Interface 414a:5353 -147 VoodooTV 200 (USA) 121a:3000 -148 DViCO FusionHDTV 2 dbc0:d200 -149 Typhoon TV-Tuner PCI (50684) -150 Geovision GV-600 008a:763c -151 Kozumi KTV-01C -152 Encore ENL TV-FM-2 1000:1801 -153 PHYTEC VD-012 (bt878) -154 PHYTEC VD-012-X1 (bt878) -155 PHYTEC VD-012-X2 (bt878) -156 IVCE-8784 0000:f050, 0001:f050, 0002:f050, 0003:f050 -157 Geovision GV-800(S) (master) 800a:763d -158 Geovision GV-800(S) (slave) 800b:763d, 800c:763d, 800d:763d -159 ProVideo PV183 1830:1540, 1831:1540, 1832:1540, 1833:1540, 1834:1540, 1835:1540, 1836:1540, 1837:1540 -160 Tongwei Video Technology TD-3116 f200:3116 -161 Aposonic W-DVR 0279:0228 -162 Adlink MPG24 -163 Bt848 Capture 14MHz -164 CyberVision CV06 (SV) -165 Kworld V-Stream Xpert TV PVR878 -166 PCI-8604PW -=========== ================================================================================= ============================================================================================================================================================================== +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - *** UNKNOWN/GENERIC *** + - + + * - 1 + - MIRO PCTV + - + + * - 2 + - Hauppauge (bt848) + - + + * - 3 + - STB, Gateway P/N 6000699 (bt848) + - + + * - 4 + - Intel Create and Share PCI/ Smart Video Recorder III + - + + * - 5 + - Diamond DTV2000 + - + + * - 6 + - AVerMedia TVPhone + - + + * - 7 + - MATRIX-Vision MV-Delta + - + + * - 8 + - Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 + - + + * - 9 + - IMS/IXmicro TurboTV + - + + * - 10 + - Hauppauge (bt878) + - 0070:13eb, 0070:3900, 2636:10b4 + + * - 11 + - MIRO PCTV pro + - + + * - 12 + - ADS Technologies Channel Surfer TV (bt848) + - + + * - 13 + - AVerMedia TVCapture 98 + - 1461:0002, 1461:0004, 1461:0300 + + * - 14 + - Aimslab Video Highway Xtreme (VHX) + - + + * - 15 + - Zoltrix TV-Max + - a1a0:a0fc + + * - 16 + - Prolink Pixelview PlayTV (bt878) + - + + * - 17 + - Leadtek WinView 601 + - + + * - 18 + - AVEC Intercapture + - + + * - 19 + - Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) + - + + * - 20 + - CEI Raffles Card + - + + * - 21 + - Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 + - + + * - 22 + - Askey CPH050/ Phoebe Tv Master + FM + - 14ff:3002 + + * - 23 + - Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 + - 14c7:0101 + + * - 24 + - Askey CPH05X/06X (bt878) [many vendors] + - 144f:3002, 144f:3005, 144f:5000, 14ff:3000 + + * - 25 + - Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar + - + + * - 26 + - Hauppauge WinCam newer (bt878) + - + + * - 27 + - Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 + - + + * - 28 + - Terratec TerraTV+ Version 1.1 (bt878) + - 153b:1127, 1852:1852 + + * - 29 + - Imagenation PXC200 + - 1295:200a + + * - 30 + - Lifeview FlyVideo 98 LR50 + - 1f7f:1850 + + * - 31 + - Formac iProTV, Formac ProTV I (bt848) + - + + * - 32 + - Intel Create and Share PCI/ Smart Video Recorder III + - + + * - 33 + - Terratec TerraTValue Version Bt878 + - 153b:1117, 153b:1118, 153b:1119, 153b:111a, 153b:1134, 153b:5018 + + * - 34 + - Leadtek WinFast 2000/ WinFast 2000 XP + - 107d:6606, 107d:6609, 6606:217d, f6ff:fff6 + + * - 35 + - Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II + - 1851:1850, 1851:a050 + + * - 36 + - Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner + - 1852:1852 + + * - 37 + - Prolink PixelView PlayTV pro + - + + * - 38 + - Askey CPH06X TView99 + - 144f:3000, 144f:a005, a04f:a0fc + + * - 39 + - Pinnacle PCTV Studio/Rave + - 11bd:0012, bd11:1200, bd11:ff00, 11bd:ff12 + + * - 40 + - STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 + - 10b4:2636, 10b4:2645, 121a:3060 + + * - 41 + - AVerMedia TVPhone 98 + - 1461:0001, 1461:0003 + + * - 42 + - ProVideo PV951 + - aa0c:146c + + * - 43 + - Little OnAir TV + - + + * - 44 + - Sigma TVII-FM + - + + * - 45 + - MATRIX-Vision MV-Delta 2 + - + + * - 46 + - Zoltrix Genie TV/FM + - 15b0:4000, 15b0:400a, 15b0:400d, 15b0:4010, 15b0:4016 + + * - 47 + - Terratec TV/Radio+ + - 153b:1123 + + * - 48 + - Askey CPH03x/ Dynalink Magic TView + - + + * - 49 + - IODATA GV-BCTV3/PCI + - 10fc:4020 + + * - 50 + - Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP + - + + * - 51 + - Eagle Wireless Capricorn2 (bt878A) + - + + * - 52 + - Pinnacle PCTV Studio Pro + - + + * - 53 + - Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS + - + + * - 54 + - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] + - + + * - 55 + - Askey CPH031/ BESTBUY Easy TV + - + + * - 56 + - Lifeview FlyVideo 98FM LR50 + - a051:41a0 + + * - 57 + - GrandTec 'Grand Video Capture' (Bt848) + - 4344:4142 + + * - 58 + - Askey CPH060/ Phoebe TV Master Only (No FM) + - + + * - 59 + - Askey CPH03x TV Capturer + - + + * - 60 + - Modular Technology MM100PCTV + - + + * - 61 + - AG Electronics GMV1 + - 15cb:0101 + + * - 62 + - Askey CPH061/ BESTBUY Easy TV (bt878) + - + + * - 63 + - ATI TV-Wonder + - 1002:0001 + + * - 64 + - ATI TV-Wonder VE + - 1002:0003 + + * - 65 + - Lifeview FlyVideo 2000S LR90 + - + + * - 66 + - Terratec TValueRadio + - 153b:1135, 153b:ff3b + + * - 67 + - IODATA GV-BCTV4/PCI + - 10fc:4050 + + * - 68 + - 3Dfx VoodooTV FM (Euro) + - 10b4:2637 + + * - 69 + - Active Imaging AIMMS + - + + * - 70 + - Prolink Pixelview PV-BT878P+ (Rev.4C,8E) + - + + * - 71 + - Lifeview FlyVideo 98EZ (capture only) LR51 + - 1851:1851 + + * - 72 + - Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) + - 1554:4011 + + * - 73 + - Sensoray 311/611 + - 6000:0311, 6000:0611 + + * - 74 + - RemoteVision MX (RV605) + - + + * - 75 + - Powercolor MTV878/ MTV878R/ MTV878F + - + + * - 76 + - Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) + - 0e11:0079 + + * - 77 + - GrandTec Multi Capture Card (Bt878) + - + + * - 78 + - Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF + - 0a01:17de + + * - 79 + - DSP Design TCVIDEO + - + + * - 80 + - Hauppauge WinTV PVR + - 0070:4500 + + * - 81 + - IODATA GV-BCTV5/PCI + - 10fc:4070, 10fc:d018 + + * - 82 + - Osprey 100/150 (878) + - 0070:ff00 + + * - 83 + - Osprey 100/150 (848) + - + + * - 84 + - Osprey 101 (848) + - + + * - 85 + - Osprey 101/151 + - + + * - 86 + - Osprey 101/151 w/ svid + - + + * - 87 + - Osprey 200/201/250/251 + - + + * - 88 + - Osprey 200/250 + - 0070:ff01 + + * - 89 + - Osprey 210/220/230 + - + + * - 90 + - Osprey 500 + - 0070:ff02 + + * - 91 + - Osprey 540 + - 0070:ff04 + + * - 92 + - Osprey 2000 + - 0070:ff03 + + * - 93 + - IDS Eagle + - + + * - 94 + - Pinnacle PCTV Sat + - 11bd:001c + + * - 95 + - Formac ProTV II (bt878) + - + + * - 96 + - MachTV + - + + * - 97 + - Euresys Picolo + - + + * - 98 + - ProVideo PV150 + - aa00:1460, aa01:1461, aa02:1462, aa03:1463, aa04:1464, aa05:1465, aa06:1466, aa07:1467 + + * - 99 + - AD-TVK503 + - + + * - 100 + - Hercules Smart TV Stereo + - + + * - 101 + - Pace TV & Radio Card + - + + * - 102 + - IVC-200 + - 0000:a155, 0001:a155, 0002:a155, 0003:a155, 0100:a155, 0101:a155, 0102:a155, 0103:a155, 0800:a155, 0801:a155, 0802:a155, 0803:a155 + + * - 103 + - Grand X-Guard / Trust 814PCI + - 0304:0102 + + * - 104 + - Nebula Electronics DigiTV + - 0071:0101 + + * - 105 + - ProVideo PV143 + - aa00:1430, aa00:1431, aa00:1432, aa00:1433, aa03:1433 + + * - 106 + - PHYTEC VD-009-X1 VD-011 MiniDIN (bt878) + - + + * - 107 + - PHYTEC VD-009-X1 VD-011 Combi (bt878) + - + + * - 108 + - PHYTEC VD-009 MiniDIN (bt878) + - + + * - 109 + - PHYTEC VD-009 Combi (bt878) + - + + * - 110 + - IVC-100 + - ff00:a132 + + * - 111 + - IVC-120G + - ff00:a182, ff01:a182, ff02:a182, ff03:a182, ff04:a182, ff05:a182, ff06:a182, ff07:a182, ff08:a182, ff09:a182, ff0a:a182, ff0b:a182, ff0c:a182, ff0d:a182, ff0e:a182, ff0f:a182 + + * - 112 + - pcHDTV HD-2000 TV + - 7063:2000 + + * - 113 + - Twinhan DST + clones + - 11bd:0026, 1822:0001, 270f:fc00, 1822:0026 + + * - 114 + - Winfast VC100 + - 107d:6607 + + * - 115 + - Teppro TEV-560/InterVision IV-560 + - + + * - 116 + - SIMUS GVC1100 + - aa6a:82b2 + + * - 117 + - NGS NGSTV+ + - + + * - 118 + - LMLBT4 + - + + * - 119 + - Tekram M205 PRO + - + + * - 120 + - Conceptronic CONTVFMi + - + + * - 121 + - Euresys Picolo Tetra + - 1805:0105, 1805:0106, 1805:0107, 1805:0108 + + * - 122 + - Spirit TV Tuner + - + + * - 123 + - AVerMedia AVerTV DVB-T 771 + - 1461:0771 + + * - 124 + - AverMedia AverTV DVB-T 761 + - 1461:0761 + + * - 125 + - MATRIX Vision Sigma-SQ + - + + * - 126 + - MATRIX Vision Sigma-SLC + - + + * - 127 + - APAC Viewcomp 878(AMAX) + - + + * - 128 + - DViCO FusionHDTV DVB-T Lite + - 18ac:db10, 18ac:db11 + + * - 129 + - V-Gear MyVCD + - + + * - 130 + - Super TV Tuner + - + + * - 131 + - Tibet Systems 'Progress DVR' CS16 + - + + * - 132 + - Kodicom 4400R (master) + - + + * - 133 + - Kodicom 4400R (slave) + - + + * - 134 + - Adlink RTV24 + - + + * - 135 + - DViCO FusionHDTV 5 Lite + - 18ac:d500 + + * - 136 + - Acorp Y878F + - 9511:1540 + + * - 137 + - Conceptronic CTVFMi v2 + - 036e:109e + + * - 138 + - Prolink Pixelview PV-BT878P+ (Rev.2E) + - + + * - 139 + - Prolink PixelView PlayTV MPEG2 PV-M4900 + - + + * - 140 + - Osprey 440 + - 0070:ff07 + + * - 141 + - Asound Skyeye PCTV + - + + * - 142 + - Sabrent TV-FM (bttv version) + - + + * - 143 + - Hauppauge ImpactVCB (bt878) + - 0070:13eb + + * - 144 + - MagicTV + - + + * - 145 + - SSAI Security Video Interface + - 4149:5353 + + * - 146 + - SSAI Ultrasound Video Interface + - 414a:5353 + + * - 147 + - VoodooTV 200 (USA) + - 121a:3000 + + * - 148 + - DViCO FusionHDTV 2 + - dbc0:d200 + + * - 149 + - Typhoon TV-Tuner PCI (50684) + - + + * - 150 + - Geovision GV-600 + - 008a:763c + + * - 151 + - Kozumi KTV-01C + - + + * - 152 + - Encore ENL TV-FM-2 + - 1000:1801 + + * - 153 + - PHYTEC VD-012 (bt878) + - + + * - 154 + - PHYTEC VD-012-X1 (bt878) + - + + * - 155 + - PHYTEC VD-012-X2 (bt878) + - + + * - 156 + - IVCE-8784 + - 0000:f050, 0001:f050, 0002:f050, 0003:f050 + + * - 157 + - Geovision GV-800(S) (master) + - 800a:763d + + * - 158 + - Geovision GV-800(S) (slave) + - 800b:763d, 800c:763d, 800d:763d + + * - 159 + - ProVideo PV183 + - 1830:1540, 1831:1540, 1832:1540, 1833:1540, 1834:1540, 1835:1540, 1836:1540, 1837:1540 + + * - 160 + - Tongwei Video Technology TD-3116 + - f200:3116 + + * - 161 + - Aposonic W-DVR + - 0279:0228 + + * - 162 + - Adlink MPG24 + - + + * - 163 + - Bt848 Capture 14MHz + - + + * - 164 + - CyberVision CV06 (SV) + - + + * - 165 + - Kworld V-Stream Xpert TV PVR878 + - + + * - 166 + - PCI-8604PW + - diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst index fd20b50d2c1d..3129ef04ddd3 100644 --- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst @@ -1,65 +1,245 @@ cx23885 cards list ================== -=========== ==================================== ====================================================================================== -Card number Card name PCI IDs -=========== ==================================== ====================================================================================== -0 UNKNOWN/GENERIC 0070:3400 -1 Hauppauge WinTV-HVR1800lp 0070:7600 -2 Hauppauge WinTV-HVR1800 0070:7800, 0070:7801, 0070:7809 -3 Hauppauge WinTV-HVR1250 0070:7911 -4 DViCO FusionHDTV5 Express 18ac:d500 -5 Hauppauge WinTV-HVR1500Q 0070:7790, 0070:7797 -6 Hauppauge WinTV-HVR1500 0070:7710, 0070:7717 -7 Hauppauge WinTV-HVR1200 0070:71d1, 0070:71d3 -8 Hauppauge WinTV-HVR1700 0070:8101 -9 Hauppauge WinTV-HVR1400 0070:8010 -10 DViCO FusionHDTV7 Dual Express 18ac:d618 -11 DViCO FusionHDTV DVB-T Dual Express 18ac:db78 -12 Leadtek Winfast PxDVR3200 H 107d:6681 -13 Compro VideoMate E650F 185b:e800 -14 TurboSight TBS 6920 6920:8888 -15 TeVii S470 d470:9022 -16 DVBWorld DVB-S2 2005 0001:2005 -17 NetUP Dual DVB-S2 CI 1b55:2a2c -18 Hauppauge WinTV-HVR1270 0070:2211 -19 Hauppauge WinTV-HVR1275 0070:2215, 0070:221d, 0070:22f2 -20 Hauppauge WinTV-HVR1255 0070:2251, 0070:22f1 -21 Hauppauge WinTV-HVR1210 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5 -22 Mygica X8506 DMB-TH 14f1:8651 -23 Magic-Pro ProHDTV Extreme 2 14f1:8657 -24 Hauppauge WinTV-HVR1850 0070:8541 -25 Compro VideoMate E800 1858:e800 -26 Hauppauge WinTV-HVR1290 0070:8551 -27 Mygica X8558 PRO DMB-TH 14f1:8578 -28 LEADTEK WinFast PxTV1200 107d:6f22 -29 GoTView X5 3D Hybrid 5654:2390 -30 NetUP Dual DVB-T/C-CI RF 1b55:e2e4 -31 Leadtek Winfast PxDVR3200 H XC4000 107d:6f39 -32 MPX-885 -33 Mygica X8502/X8507 ISDB-T 14f1:8502 -34 TerraTec Cinergy T PCIe Dual 153b:117e -35 TeVii S471 d471:9022 -36 Hauppauge WinTV-HVR1255 0070:2259 -37 Prof Revolution DVB-S2 8000 8000:3034 -38 Hauppauge WinTV-HVR4400/HVR5500 0070:c108, 0070:c138, 0070:c1f8 -39 AVerTV Hybrid Express Slim HC81R 1461:d939 -40 TurboSight TBS 6981 6981:8888 -41 TurboSight TBS 6980 6980:8888 -42 Leadtek Winfast PxPVR2200 107d:6f21 -43 Hauppauge ImpactVCB-e 0070:7133 -44 DViCO FusionHDTV DVB-T Dual Express2 18ac:db98 -45 DVBSky T9580 4254:9580 -46 DVBSky T980C 4254:980c -47 DVBSky S950C 4254:950c -48 Technotrend TT-budget CT2-4500 CI 13c2:3013 -49 DVBSky S950 4254:0950 -50 DVBSky S952 4254:0952 -51 DVBSky T982 4254:0982 -52 Hauppauge WinTV-HVR5525 0070:f038 -53 Hauppauge WinTV Starburst 0070:c12a -54 ViewCast 260e 1576:0260 -55 ViewCast 460e 1576:0460 -56 Hauppauge WinTV-QuadHD-DVB 0070:6a28, 0070:6b28 -57 Hauppauge WinTV-QuadHD-ATSC 0070:6a18, 0070:6b18 -=========== ==================================== ====================================================================================== +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - UNKNOWN/GENERIC + - 0070:3400 + + * - 1 + - Hauppauge WinTV-HVR1800lp + - 0070:7600 + + * - 2 + - Hauppauge WinTV-HVR1800 + - 0070:7800, 0070:7801, 0070:7809 + + * - 3 + - Hauppauge WinTV-HVR1250 + - 0070:7911 + + * - 4 + - DViCO FusionHDTV5 Express + - 18ac:d500 + + * - 5 + - Hauppauge WinTV-HVR1500Q + - 0070:7790, 0070:7797 + + * - 6 + - Hauppauge WinTV-HVR1500 + - 0070:7710, 0070:7717 + + * - 7 + - Hauppauge WinTV-HVR1200 + - 0070:71d1, 0070:71d3 + + * - 8 + - Hauppauge WinTV-HVR1700 + - 0070:8101 + + * - 9 + - Hauppauge WinTV-HVR1400 + - 0070:8010 + + * - 10 + - DViCO FusionHDTV7 Dual Express + - 18ac:d618 + + * - 11 + - DViCO FusionHDTV DVB-T Dual Express + - 18ac:db78 + + * - 12 + - Leadtek Winfast PxDVR3200 H + - 107d:6681 + + * - 13 + - Compro VideoMate E650F + - 185b:e800 + + * - 14 + - TurboSight TBS 6920 + - 6920:8888 + + * - 15 + - TeVii S470 + - d470:9022 + + * - 16 + - DVBWorld DVB-S2 2005 + - 0001:2005 + + * - 17 + - NetUP Dual DVB-S2 CI + - 1b55:2a2c + + * - 18 + - Hauppauge WinTV-HVR1270 + - 0070:2211 + + * - 19 + - Hauppauge WinTV-HVR1275 + - 0070:2215, 0070:221d, 0070:22f2 + + * - 20 + - Hauppauge WinTV-HVR1255 + - 0070:2251, 0070:22f1 + + * - 21 + - Hauppauge WinTV-HVR1210 + - 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5 + + * - 22 + - Mygica X8506 DMB-TH + - 14f1:8651 + + * - 23 + - Magic-Pro ProHDTV Extreme 2 + - 14f1:8657 + + * - 24 + - Hauppauge WinTV-HVR1850 + - 0070:8541 + + * - 25 + - Compro VideoMate E800 + - 1858:e800 + + * - 26 + - Hauppauge WinTV-HVR1290 + - 0070:8551 + + * - 27 + - Mygica X8558 PRO DMB-TH + - 14f1:8578 + + * - 28 + - LEADTEK WinFast PxTV1200 + - 107d:6f22 + + * - 29 + - GoTView X5 3D Hybrid + - 5654:2390 + + * - 30 + - NetUP Dual DVB-T/C-CI RF + - 1b55:e2e4 + + * - 31 + - Leadtek Winfast PxDVR3200 H XC4000 + - 107d:6f39 + + * - 32 + - MPX-885 + - + + * - 33 + - Mygica X8502/X8507 ISDB-T + - 14f1:8502 + + * - 34 + - TerraTec Cinergy T PCIe Dual + - 153b:117e + + * - 35 + - TeVii S471 + - d471:9022 + + * - 36 + - Hauppauge WinTV-HVR1255 + - 0070:2259 + + * - 37 + - Prof Revolution DVB-S2 8000 + - 8000:3034 + + * - 38 + - Hauppauge WinTV-HVR4400/HVR5500 + - 0070:c108, 0070:c138, 0070:c1f8 + + * - 39 + - AVerTV Hybrid Express Slim HC81R + - 1461:d939 + + * - 40 + - TurboSight TBS 6981 + - 6981:8888 + + * - 41 + - TurboSight TBS 6980 + - 6980:8888 + + * - 42 + - Leadtek Winfast PxPVR2200 + - 107d:6f21 + + * - 43 + - Hauppauge ImpactVCB-e + - 0070:7133 + + * - 44 + - DViCO FusionHDTV DVB-T Dual Express2 + - 18ac:db98 + + * - 45 + - DVBSky T9580 + - 4254:9580 + + * - 46 + - DVBSky T980C + - 4254:980c + + * - 47 + - DVBSky S950C + - 4254:950c + + * - 48 + - Technotrend TT-budget CT2-4500 CI + - 13c2:3013 + + * - 49 + - DVBSky S950 + - 4254:0950 + + * - 50 + - DVBSky S952 + - 4254:0952 + + * - 51 + - DVBSky T982 + - 4254:0982 + + * - 52 + - Hauppauge WinTV-HVR5525 + - 0070:f038 + + * - 53 + - Hauppauge WinTV Starburst + - 0070:c12a + + * - 54 + - ViewCast 260e + - 1576:0260 + + * - 55 + - ViewCast 460e + - 1576:0460 + + * - 56 + - Hauppauge WinTV-QuadHD-DVB + - 0070:6a28, 0070:6b28 + + * - 57 + - Hauppauge WinTV-QuadHD-ATSC + - 0070:6a18, 0070:6b18 diff --git a/Documentation/media/v4l-drivers/cx88-cardlist.rst b/Documentation/media/v4l-drivers/cx88-cardlist.rst index 8cc1cea17035..21648b8c2e83 100644 --- a/Documentation/media/v4l-drivers/cx88-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx88-cardlist.rst @@ -1,98 +1,377 @@ CX88 cards list =============== -=========== =================================================== ====================================================================================== -Card number Card name PCI IDs -=========== =================================================== ====================================================================================== -0 UNKNOWN/GENERIC -1 Hauppauge WinTV 34xxx models 0070:3400, 0070:3401 -2 GDI Black Gold 14c7:0106, 14c7:0107 -3 PixelView 1554:4811 -4 ATI TV Wonder Pro 1002:00f8, 1002:00f9 -5 Leadtek Winfast 2000XP Expert 107d:6611, 107d:6613 -6 AverTV Studio 303 (M126) 1461:000b -7 MSI TV-@nywhere Master 1462:8606 -8 Leadtek Winfast DV2000 107d:6620, 107d:6621 -9 Leadtek PVR 2000 107d:663b, 107d:663c, 107d:6632, 107d:6630, 107d:6638, 107d:6631, 107d:6637, 107d:663d -10 IODATA GV-VCP3/PCI 10fc:d003 -11 Prolink PlayTV PVR -12 ASUS PVR-416 1043:4823, 1461:c111 -13 MSI TV-@nywhere -14 KWorld/VStream XPert DVB-T 17de:08a6 -15 DViCO FusionHDTV DVB-T1 18ac:db00 -16 KWorld LTV883RF -17 DViCO FusionHDTV 3 Gold-Q 18ac:d810, 18ac:d800 -18 Hauppauge Nova-T DVB-T 0070:9002, 0070:9001, 0070:9000 -19 Conexant DVB-T reference design 14f1:0187 -20 Provideo PV259 1540:2580 -21 DViCO FusionHDTV DVB-T Plus 18ac:db10, 18ac:db11 -22 pcHDTV HD3000 HDTV 7063:3000 -23 digitalnow DNTV Live! DVB-T 17de:a8a6 -24 Hauppauge WinTV 28xxx (Roslyn) models 0070:2801 -25 Digital-Logic MICROSPACE Entertainment Center (MEC) 14f1:0342 -26 IODATA GV/BCTV7E 10fc:d035 -27 PixelView PlayTV Ultra Pro (Stereo) -28 DViCO FusionHDTV 3 Gold-T 18ac:d820 -29 ADS Tech Instant TV DVB-T PCI 1421:0334 -30 TerraTec Cinergy 1400 DVB-T 153b:1166 -31 DViCO FusionHDTV 5 Gold 18ac:d500 -32 AverMedia UltraTV Media Center PCI 550 1461:8011 -33 Kworld V-Stream Xpert DVD -34 ATI HDTV Wonder 1002:a101 -35 WinFast DTV1000-T 107d:665f -36 AVerTV 303 (M126) 1461:000a -37 Hauppauge Nova-S-Plus DVB-S 0070:9201, 0070:9202 -38 Hauppauge Nova-SE2 DVB-S 0070:9200 -39 KWorld DVB-S 100 17de:08b2, 1421:0341 -40 Hauppauge WinTV-HVR1100 DVB-T/Hybrid 0070:9400, 0070:9402 -41 Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) 0070:9800, 0070:9802 -42 digitalnow DNTV Live! DVB-T Pro 1822:0025, 1822:0019 -43 KWorld/VStream XPert DVB-T with cx22702 17de:08a1, 12ab:2300 -44 DViCO FusionHDTV DVB-T Dual Digital 18ac:db50, 18ac:db54 -45 KWorld HardwareMpegTV XPert 17de:0840, 1421:0305 -46 DViCO FusionHDTV DVB-T Hybrid 18ac:db40, 18ac:db44 -47 pcHDTV HD5500 HDTV 7063:5500 -48 Kworld MCE 200 Deluxe 17de:0841 -49 PixelView PlayTV P7000 1554:4813 -50 NPG Tech Real TV FM Top 10 14f1:0842 -51 WinFast DTV2000 H 107d:665e -52 Geniatech DVB-S 14f1:0084 -53 Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T 0070:1404, 0070:1400, 0070:1401, 0070:1402 -54 Norwood Micro TV Tuner -55 Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM c180:c980 -56 Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder 0070:9600, 0070:9601, 0070:9602 -57 ADS Tech Instant Video PCI 1421:0390 -58 Pinnacle PCTV HD 800i 11bd:0051 -59 DViCO FusionHDTV 5 PCI nano 18ac:d530 -60 Pinnacle Hybrid PCTV 12ab:1788 -61 Leadtek TV2000 XP Global 107d:6f18, 107d:6618, 107d:6619 -62 PowerColor RA330 14f1:ea3d -63 Geniatech X8000-MT DVBT 14f1:8852 -64 DViCO FusionHDTV DVB-T PRO 18ac:db30 -65 DViCO FusionHDTV 7 Gold 18ac:d610 -66 Prolink Pixelview MPEG 8000GT 1554:4935 -67 Kworld PlusTV HD PCI 120 (ATSC 120) 17de:08c1 -68 Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid 0070:6900, 0070:6904, 0070:6902 -69 Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 0070:6905, 0070:6906 -70 TeVii S460 DVB-S/S2 d460:9022 -71 Omicom SS4 DVB-S/S2 PCI A044:2011 -72 TBS 8920 DVB-S/S2 8920:8888 -73 TeVii S420 DVB-S d420:9022 -74 Prolink Pixelview Global Extreme 1554:4976 -75 PROF 7300 DVB-S/S2 B033:3033 -76 SATTRADE ST4200 DVB-S/S2 b200:4200 -77 TBS 8910 DVB-S 8910:8888 -78 Prof 6200 DVB-S b022:3022 -79 Terratec Cinergy HT PCI MKII 153b:1177 -80 Hauppauge WinTV-IR Only 0070:9290 -81 Leadtek WinFast DTV1800 Hybrid 107d:6654 -82 WinFast DTV2000 H rev. J 107d:6f2b -83 Prof 7301 DVB-S/S2 b034:3034 -84 Samsung SMT 7020 DVB-S 18ac:dc00, 18ac:dccd -85 Twinhan VP-1027 DVB-S 1822:0023 -86 TeVii S464 DVB-S/S2 d464:9022 -87 Leadtek WinFast DTV2000 H PLUS 107d:6f42 -88 Leadtek WinFast DTV1800 H (XC4000) 107d:6f38 -89 Leadtek TV2000 XP Global (SC4100) 107d:6f36 -90 Leadtek TV2000 XP Global (XC4100) 107d:6f43 -=========== =================================================== ====================================================================================== +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - UNKNOWN/GENERIC + - + + * - 1 + - Hauppauge WinTV 34xxx models + - 0070:3400, 0070:3401 + + * - 2 + - GDI Black Gold + - 14c7:0106, 14c7:0107 + + * - 3 + - PixelView + - 1554:4811 + + * - 4 + - ATI TV Wonder Pro + - 1002:00f8, 1002:00f9 + + * - 5 + - Leadtek Winfast 2000XP Expert + - 107d:6611, 107d:6613 + + * - 6 + - AverTV Studio 303 (M126) + - 1461:000b + + * - 7 + - MSI TV-@nywhere Master + - 1462:8606 + + * - 8 + - Leadtek Winfast DV2000 + - 107d:6620, 107d:6621 + + * - 9 + - Leadtek PVR 2000 + - 107d:663b, 107d:663c, 107d:6632, 107d:6630, 107d:6638, 107d:6631, 107d:6637, 107d:663d + + * - 10 + - IODATA GV-VCP3/PCI + - 10fc:d003 + + * - 11 + - Prolink PlayTV PVR + - + + * - 12 + - ASUS PVR-416 + - 1043:4823, 1461:c111 + + * - 13 + - MSI TV-@nywhere + - + + * - 14 + - KWorld/VStream XPert DVB-T + - 17de:08a6 + + * - 15 + - DViCO FusionHDTV DVB-T1 + - 18ac:db00 + + * - 16 + - KWorld LTV883RF + - + + * - 17 + - DViCO FusionHDTV 3 Gold-Q + - 18ac:d810, 18ac:d800 + + * - 18 + - Hauppauge Nova-T DVB-T + - 0070:9002, 0070:9001, 0070:9000 + + * - 19 + - Conexant DVB-T reference design + - 14f1:0187 + + * - 20 + - Provideo PV259 + - 1540:2580 + + * - 21 + - DViCO FusionHDTV DVB-T Plus + - 18ac:db10, 18ac:db11 + + * - 22 + - pcHDTV HD3000 HDTV + - 7063:3000 + + * - 23 + - digitalnow DNTV Live! DVB-T + - 17de:a8a6 + + * - 24 + - Hauppauge WinTV 28xxx (Roslyn) models + - 0070:2801 + + * - 25 + - Digital-Logic MICROSPACE Entertainment Center (MEC) + - 14f1:0342 + + * - 26 + - IODATA GV/BCTV7E + - 10fc:d035 + + * - 27 + - PixelView PlayTV Ultra Pro (Stereo) + - + + * - 28 + - DViCO FusionHDTV 3 Gold-T + - 18ac:d820 + + * - 29 + - ADS Tech Instant TV DVB-T PCI + - 1421:0334 + + * - 30 + - TerraTec Cinergy 1400 DVB-T + - 153b:1166 + + * - 31 + - DViCO FusionHDTV 5 Gold + - 18ac:d500 + + * - 32 + - AverMedia UltraTV Media Center PCI 550 + - 1461:8011 + + * - 33 + - Kworld V-Stream Xpert DVD + - + + * - 34 + - ATI HDTV Wonder + - 1002:a101 + + * - 35 + - WinFast DTV1000-T + - 107d:665f + + * - 36 + - AVerTV 303 (M126) + - 1461:000a + + * - 37 + - Hauppauge Nova-S-Plus DVB-S + - 0070:9201, 0070:9202 + + * - 38 + - Hauppauge Nova-SE2 DVB-S + - 0070:9200 + + * - 39 + - KWorld DVB-S 100 + - 17de:08b2, 1421:0341 + + * - 40 + - Hauppauge WinTV-HVR1100 DVB-T/Hybrid + - 0070:9400, 0070:9402 + + * - 41 + - Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) + - 0070:9800, 0070:9802 + + * - 42 + - digitalnow DNTV Live! DVB-T Pro + - 1822:0025, 1822:0019 + + * - 43 + - KWorld/VStream XPert DVB-T with cx22702 + - 17de:08a1, 12ab:2300 + + * - 44 + - DViCO FusionHDTV DVB-T Dual Digital + - 18ac:db50, 18ac:db54 + + * - 45 + - KWorld HardwareMpegTV XPert + - 17de:0840, 1421:0305 + + * - 46 + - DViCO FusionHDTV DVB-T Hybrid + - 18ac:db40, 18ac:db44 + + * - 47 + - pcHDTV HD5500 HDTV + - 7063:5500 + + * - 48 + - Kworld MCE 200 Deluxe + - 17de:0841 + + * - 49 + - PixelView PlayTV P7000 + - 1554:4813 + + * - 50 + - NPG Tech Real TV FM Top 10 + - 14f1:0842 + + * - 51 + - WinFast DTV2000 H + - 107d:665e + + * - 52 + - Geniatech DVB-S + - 14f1:0084 + + * - 53 + - Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T + - 0070:1404, 0070:1400, 0070:1401, 0070:1402 + + * - 54 + - Norwood Micro TV Tuner + - + + * - 55 + - Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM + - c180:c980 + + * - 56 + - Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder + - 0070:9600, 0070:9601, 0070:9602 + + * - 57 + - ADS Tech Instant Video PCI + - 1421:0390 + + * - 58 + - Pinnacle PCTV HD 800i + - 11bd:0051 + + * - 59 + - DViCO FusionHDTV 5 PCI nano + - 18ac:d530 + + * - 60 + - Pinnacle Hybrid PCTV + - 12ab:1788 + + * - 61 + - Leadtek TV2000 XP Global + - 107d:6f18, 107d:6618, 107d:6619 + + * - 62 + - PowerColor RA330 + - 14f1:ea3d + + * - 63 + - Geniatech X8000-MT DVBT + - 14f1:8852 + + * - 64 + - DViCO FusionHDTV DVB-T PRO + - 18ac:db30 + + * - 65 + - DViCO FusionHDTV 7 Gold + - 18ac:d610 + + * - 66 + - Prolink Pixelview MPEG 8000GT + - 1554:4935 + + * - 67 + - Kworld PlusTV HD PCI 120 (ATSC 120) + - 17de:08c1 + + * - 68 + - Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid + - 0070:6900, 0070:6904, 0070:6902 + + * - 69 + - Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 + - 0070:6905, 0070:6906 + + * - 70 + - TeVii S460 DVB-S/S2 + - d460:9022 + + * - 71 + - Omicom SS4 DVB-S/S2 PCI + - A044:2011 + + * - 72 + - TBS 8920 DVB-S/S2 + - 8920:8888 + + * - 73 + - TeVii S420 DVB-S + - d420:9022 + + * - 74 + - Prolink Pixelview Global Extreme + - 1554:4976 + + * - 75 + - PROF 7300 DVB-S/S2 + - B033:3033 + + * - 76 + - SATTRADE ST4200 DVB-S/S2 + - b200:4200 + + * - 77 + - TBS 8910 DVB-S + - 8910:8888 + + * - 78 + - Prof 6200 DVB-S + - b022:3022 + + * - 79 + - Terratec Cinergy HT PCI MKII + - 153b:1177 + + * - 80 + - Hauppauge WinTV-IR Only + - 0070:9290 + + * - 81 + - Leadtek WinFast DTV1800 Hybrid + - 107d:6654 + + * - 82 + - WinFast DTV2000 H rev. J + - 107d:6f2b + + * - 83 + - Prof 7301 DVB-S/S2 + - b034:3034 + + * - 84 + - Samsung SMT 7020 DVB-S + - 18ac:dc00, 18ac:dccd + + * - 85 + - Twinhan VP-1027 DVB-S + - 1822:0023 + + * - 86 + - TeVii S464 DVB-S/S2 + - d464:9022 + + * - 87 + - Leadtek WinFast DTV2000 H PLUS + - 107d:6f42 + + * - 88 + - Leadtek WinFast DTV1800 H (XC4000) + - 107d:6f38 + + * - 89 + - Leadtek TV2000 XP Global (SC4100) + - 107d:6f36 + + * - 90 + - Leadtek TV2000 XP Global (XC4100) + - 107d:6f43 diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst index 76b1d301754c..ec938c08f43d 100644 --- a/Documentation/media/v4l-drivers/em28xx-cardlist.rst +++ b/Documentation/media/v4l-drivers/em28xx-cardlist.rst @@ -1,107 +1,422 @@ EM28xx cards list ================= -=========== ==================================================================== ================ ================================================================================================================================== -Card number Card name Empia Chip USB IDs -=========== ==================================================================== ================ ================================================================================================================================== -0 Unknown EM2800 video grabber em2800 eb1a:2800 -1 Unknown EM2750/28xx video grabber em2820 or em2840 eb1a:2710, eb1a:2820, eb1a:2821, eb1a:2860, eb1a:2861, eb1a:2862, eb1a:2863, eb1a:2870, eb1a:2881, eb1a:2883, eb1a:2868, eb1a:2875 -2 Terratec Cinergy 250 USB em2820 or em2840 0ccd:0036 -3 Pinnacle PCTV USB 2 em2820 or em2840 2304:0208 -4 Hauppauge WinTV USB 2 em2820 or em2840 2040:4200, 2040:4201 -5 MSI VOX USB 2.0 em2820 or em2840 -6 Terratec Cinergy 200 USB em2800 -7 Leadtek Winfast USB II em2800 0413:6023 -8 Kworld USB2800 em2800 -9 Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker em2820 or em2840 1b80:e302, 1b80:e304, 2304:0207, 2304:021a, 093b:a003 -10 Hauppauge WinTV HVR 900 em2880 2040:6500 -11 Terratec Hybrid XS em2880 -12 Kworld PVR TV 2800 RF em2820 or em2840 -13 Terratec Prodigy XS em2880 -14 SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 em2820 or em2840 -15 V-Gear PocketTV em2800 -16 Hauppauge WinTV HVR 950 em2883 2040:6513, 2040:6517, 2040:651b -17 Pinnacle PCTV HD Pro Stick em2880 2304:0227 -18 Hauppauge WinTV HVR 900 (R2) em2880 2040:6502 -19 EM2860/SAA711X Reference Design em2860 -20 AMD ATI TV Wonder HD 600 em2880 0438:b002 -21 eMPIA Technology, Inc. GrabBeeX+ Video Encoder em2800 eb1a:2801 -22 EM2710/EM2750/EM2751 webcam grabber em2750 eb1a:2750, eb1a:2751 -23 Huaqi DLCW-130 em2750 -24 D-Link DUB-T210 TV Tuner em2820 or em2840 2001:f112 -25 Gadmei UTV310 em2820 or em2840 -26 Hercules Smart TV USB 2.0 em2820 or em2840 -27 Pinnacle PCTV USB 2 (Philips FM1216ME) em2820 or em2840 -28 Leadtek Winfast USB II Deluxe em2820 or em2840 -29 EM2860/TVP5150 Reference Design em2860 -30 Videology 20K14XUSB USB2.0 em2820 or em2840 -31 Usbgear VD204v9 em2821 -32 Supercomp USB 2.0 TV em2821 -33 Elgato Video Capture em2860 0fd9:0033 -34 Terratec Cinergy A Hybrid XS em2860 0ccd:004f -35 Typhoon DVD Maker em2860 -36 NetGMBH Cam em2860 -37 Gadmei UTV330 em2860 eb1a:50a6 -38 Yakumo MovieMixer em2861 -39 KWorld PVRTV 300U em2861 eb1a:e300 -40 Plextor ConvertX PX-TV100U em2861 093b:a005 -41 Kworld 350 U DVB-T em2870 eb1a:e350 -42 Kworld 355 U DVB-T em2870 eb1a:e355, eb1a:e357, eb1a:e359 -43 Terratec Cinergy T XS em2870 -44 Terratec Cinergy T XS (MT2060) em2870 0ccd:0043 -45 Pinnacle PCTV DVB-T em2870 -46 Compro, VideoMate U3 em2870 185b:2870 -47 KWorld DVB-T 305U em2880 eb1a:e305 -48 KWorld DVB-T 310U em2880 -49 MSI DigiVox A/D em2880 eb1a:e310 -50 MSI DigiVox A/D II em2880 eb1a:e320 -51 Terratec Hybrid XS Secam em2880 0ccd:004c -52 DNT DA2 Hybrid em2881 -53 Pinnacle Hybrid Pro em2881 -54 Kworld VS-DVB-T 323UR em2882 eb1a:e323 -55 Terratec Cinnergy Hybrid T USB XS (em2882) em2882 0ccd:005e, 0ccd:0042 -56 Pinnacle Hybrid Pro (330e) em2882 2304:0226 -57 Kworld PlusTV HD Hybrid 330 em2883 eb1a:a316 -58 Compro VideoMate ForYou/Stereo em2820 or em2840 185b:2041 -59 Pinnacle PCTV HD Mini em2874 2304:023f -60 Hauppauge WinTV HVR 850 em2883 2040:651f -61 Pixelview PlayTV Box 4 USB 2.0 em2820 or em2840 -62 Gadmei TVR200 em2820 or em2840 -63 Kaiomy TVnPC U2 em2860 eb1a:e303 -64 Easy Cap Capture DC-60 em2860 1b80:e309 -65 IO-DATA GV-MVP/SZ em2820 or em2840 04bb:0515 -66 Empire dual TV em2880 -67 Terratec Grabby em2860 0ccd:0096, 0ccd:10AF -68 Terratec AV350 em2860 0ccd:0084 -69 KWorld ATSC 315U HDTV TV Box em2882 eb1a:a313 -70 Evga inDtube em2882 -71 Silvercrest Webcam 1.3mpix em2820 or em2840 -72 Gadmei UTV330+ em2861 -73 Reddo DVB-C USB TV Box em2870 -74 Actionmaster/LinXcel/Digitus VC211A em2800 -75 Dikom DK300 em2882 -76 KWorld PlusTV 340U or UB435-Q (ATSC) em2870 1b80:a340 -77 EM2874 Leadership ISDBT em2874 -78 PCTV nanoStick T2 290e em28174 2013:024f -79 Terratec Cinergy H5 em2884 eb1a:2885, 0ccd:10a2, 0ccd:10ad, 0ccd:10b6 -80 PCTV DVB-S2 Stick (460e) em28174 2013:024c -81 Hauppauge WinTV HVR 930C em2884 2040:1605 -82 Terratec Cinergy HTC Stick em2884 0ccd:00b2 -83 Honestech Vidbox NW03 em2860 eb1a:5006 -84 MaxMedia UB425-TC em2874 1b80:e425 -85 PCTV QuatroStick (510e) em2884 2304:0242 -86 PCTV QuatroStick nano (520e) em2884 2013:0251 -87 Terratec Cinergy HTC USB XS em2884 0ccd:008e, 0ccd:00ac -88 C3 Tech Digital Duo HDTV/SDTV USB em2884 1b80:e755 -89 Delock 61959 em2874 1b80:e1cc -90 KWorld USB ATSC TV Stick UB435-Q V2 em2874 1b80:e346 -91 SpeedLink Vicious And Devine Laplace webcam em2765 1ae7:9003, 1ae7:9004 -92 PCTV DVB-S2 Stick (461e) em28178 2013:0258 -93 KWorld USB ATSC TV Stick UB435-Q V3 em2874 1b80:e34c -94 PCTV tripleStick (292e) em28178 2013:025f, 2040:0264 -95 Leadtek VC100 em2861 0413:6f07 -96 Terratec Cinergy T2 Stick HD em28178 eb1a:8179 -97 Elgato EyeTV Hybrid 2008 INT em2884 0fd9:0018 -98 PLEX PX-BCUD em28178 3275:0085 -99 Hauppauge WinTV-dualHD DVB em28174 2040:0265 -=========== ==================================================================== ================ ================================================================================================================================== +.. tabularcolumns:: |p{1.4cm}|p{10.0cm}|p{1.9cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 12 3 16 + :stub-columns: 0 + + * - Card number + - Card name + - Empia Chip + - USB IDs + * - 0 + - Unknown EM2800 video grabber + - em2800 + - eb1a:2800 + * - 1 + - Unknown EM2750/28xx video grabber + - em2820 or em2840 + - eb1a:2710, eb1a:2820, eb1a:2821, eb1a:2860, eb1a:2861, eb1a:2862, eb1a:2863, eb1a:2870, eb1a:2881, eb1a:2883, eb1a:2868, eb1a:2875 + * - 2 + - Terratec Cinergy 250 USB + - em2820 or em2840 + - 0ccd:0036 + * - 3 + - Pinnacle PCTV USB 2 + - em2820 or em2840 + - 2304:0208 + * - 4 + - Hauppauge WinTV USB 2 + - em2820 or em2840 + - 2040:4200, 2040:4201 + * - 5 + - MSI VOX USB 2.0 + - em2820 or em2840 + - + * - 6 + - Terratec Cinergy 200 USB + - em2800 + - + * - 7 + - Leadtek Winfast USB II + - em2800 + - 0413:6023 + * - 8 + - Kworld USB2800 + - em2800 + - + * - 9 + - Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U + - em2820 or em2840 + - 1b80:e302, 1b80:e304, 2304:0207, 2304:021a, 093b:a003 + * - 10 + - Hauppauge WinTV HVR 900 + - em2880 + - 2040:6500 + * - 11 + - Terratec Hybrid XS + - em2880 + - + * - 12 + - Kworld PVR TV 2800 RF + - em2820 or em2840 + - + * - 13 + - Terratec Prodigy XS + - em2880 + - + * - 14 + - SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 + - em2820 or em2840 + - + * - 15 + - V-Gear PocketTV + - em2800 + - + * - 16 + - Hauppauge WinTV HVR 950 + - em2883 + - 2040:6513, 2040:6517, 2040:651b + * - 17 + - Pinnacle PCTV HD Pro Stick + - em2880 + - 2304:0227 + * - 18 + - Hauppauge WinTV HVR 900 (R2) + - em2880 + - 2040:6502 + * - 19 + - EM2860/SAA711X Reference Design + - em2860 + - + * - 20 + - AMD ATI TV Wonder HD 600 + - em2880 + - 0438:b002 + * - 21 + - eMPIA Technology, Inc. GrabBeeX+ Video Encoder + - em2800 + - eb1a:2801 + * - 22 + - EM2710/EM2750/EM2751 webcam grabber + - em2750 + - eb1a:2750, eb1a:2751 + * - 23 + - Huaqi DLCW-130 + - em2750 + - + * - 24 + - D-Link DUB-T210 TV Tuner + - em2820 or em2840 + - 2001:f112 + * - 25 + - Gadmei UTV310 + - em2820 or em2840 + - + * - 26 + - Hercules Smart TV USB 2.0 + - em2820 or em2840 + - + * - 27 + - Pinnacle PCTV USB 2 (Philips FM1216ME) + - em2820 or em2840 + - + * - 28 + - Leadtek Winfast USB II Deluxe + - em2820 or em2840 + - + * - 29 + - EM2860/TVP5150 Reference Design + - em2860 + - eb1a:5051 + * - 30 + - Videology 20K14XUSB USB2.0 + - em2820 or em2840 + - + * - 31 + - Usbgear VD204v9 + - em2821 + - + * - 32 + - Supercomp USB 2.0 TV + - em2821 + - + * - 33 + - Elgato Video Capture + - em2860 + - 0fd9:0033 + * - 34 + - Terratec Cinergy A Hybrid XS + - em2860 + - 0ccd:004f + * - 35 + - Typhoon DVD Maker + - em2860 + - + * - 36 + - NetGMBH Cam + - em2860 + - + * - 37 + - Gadmei UTV330 + - em2860 + - eb1a:50a6 + * - 38 + - Yakumo MovieMixer + - em2861 + - + * - 39 + - KWorld PVRTV 300U + - em2861 + - eb1a:e300 + * - 40 + - Plextor ConvertX PX-TV100U + - em2861 + - 093b:a005 + * - 41 + - Kworld 350 U DVB-T + - em2870 + - eb1a:e350 + * - 42 + - Kworld 355 U DVB-T + - em2870 + - eb1a:e355, eb1a:e357, eb1a:e359 + * - 43 + - Terratec Cinergy T XS + - em2870 + - + * - 44 + - Terratec Cinergy T XS (MT2060) + - em2870 + - 0ccd:0043 + * - 45 + - Pinnacle PCTV DVB-T + - em2870 + - + * - 46 + - Compro, VideoMate U3 + - em2870 + - 185b:2870 + * - 47 + - KWorld DVB-T 305U + - em2880 + - eb1a:e305 + * - 48 + - KWorld DVB-T 310U + - em2880 + - + * - 49 + - MSI DigiVox A/D + - em2880 + - eb1a:e310 + * - 50 + - MSI DigiVox A/D II + - em2880 + - eb1a:e320 + * - 51 + - Terratec Hybrid XS Secam + - em2880 + - 0ccd:004c + * - 52 + - DNT DA2 Hybrid + - em2881 + - + * - 53 + - Pinnacle Hybrid Pro + - em2881 + - + * - 54 + - Kworld VS-DVB-T 323UR + - em2882 + - eb1a:e323 + * - 55 + - Terratec Cinnergy Hybrid T USB XS (em2882) + - em2882 + - 0ccd:005e, 0ccd:0042 + * - 56 + - Pinnacle Hybrid Pro (330e) + - em2882 + - 2304:0226 + * - 57 + - Kworld PlusTV HD Hybrid 330 + - em2883 + - eb1a:a316 + * - 58 + - Compro VideoMate ForYou/Stereo + - em2820 or em2840 + - 185b:2041 + * - 59 + - Pinnacle PCTV HD Mini + - em2874 + - 2304:023f + * - 60 + - Hauppauge WinTV HVR 850 + - em2883 + - 2040:651f + * - 61 + - Pixelview PlayTV Box 4 USB 2.0 + - em2820 or em2840 + - + * - 62 + - Gadmei TVR200 + - em2820 or em2840 + - + * - 63 + - Kaiomy TVnPC U2 + - em2860 + - eb1a:e303 + * - 64 + - Easy Cap Capture DC-60 + - em2860 + - 1b80:e309 + * - 65 + - IO-DATA GV-MVP/SZ + - em2820 or em2840 + - 04bb:0515 + * - 66 + - Empire dual TV + - em2880 + - + * - 67 + - Terratec Grabby + - em2860 + - 0ccd:0096, 0ccd:10AF + * - 68 + - Terratec AV350 + - em2860 + - 0ccd:0084 + * - 69 + - KWorld ATSC 315U HDTV TV Box + - em2882 + - eb1a:a313 + * - 70 + - Evga inDtube + - em2882 + - + * - 71 + - Silvercrest Webcam 1.3mpix + - em2820 or em2840 + - + * - 72 + - Gadmei UTV330+ + - em2861 + - + * - 73 + - Reddo DVB-C USB TV Box + - em2870 + - + * - 74 + - Actionmaster/LinXcel/Digitus VC211A + - em2800 + - + * - 75 + - Dikom DK300 + - em2882 + - + * - 76 + - KWorld PlusTV 340U or UB435-Q (ATSC) + - em2870 + - 1b80:a340 + * - 77 + - EM2874 Leadership ISDBT + - em2874 + - + * - 78 + - PCTV nanoStick T2 290e + - em28174 + - 2013:024f + * - 79 + - Terratec Cinergy H5 + - em2884 + - eb1a:2885, 0ccd:10a2, 0ccd:10ad, 0ccd:10b6 + * - 80 + - PCTV DVB-S2 Stick (460e) + - em28174 + - 2013:024c + * - 81 + - Hauppauge WinTV HVR 930C + - em2884 + - 2040:1605 + * - 82 + - Terratec Cinergy HTC Stick + - em2884 + - 0ccd:00b2 + * - 83 + - Honestech Vidbox NW03 + - em2860 + - eb1a:5006 + * - 84 + - MaxMedia UB425-TC + - em2874 + - 1b80:e425 + * - 85 + - PCTV QuatroStick (510e) + - em2884 + - 2304:0242 + * - 86 + - PCTV QuatroStick nano (520e) + - em2884 + - 2013:0251 + * - 87 + - Terratec Cinergy HTC USB XS + - em2884 + - 0ccd:008e, 0ccd:00ac + * - 88 + - C3 Tech Digital Duo HDTV/SDTV USB + - em2884 + - 1b80:e755 + * - 89 + - Delock 61959 + - em2874 + - 1b80:e1cc + * - 90 + - KWorld USB ATSC TV Stick UB435-Q V2 + - em2874 + - 1b80:e346 + * - 91 + - SpeedLink Vicious And Devine Laplace webcam + - em2765 + - 1ae7:9003, 1ae7:9004 + * - 92 + - PCTV DVB-S2 Stick (461e) + - em28178 + - 2013:0258 + * - 93 + - KWorld USB ATSC TV Stick UB435-Q V3 + - em2874 + - 1b80:e34c + * - 94 + - PCTV tripleStick (292e) + - em28178 + - 2013:025f, 2040:0264 + * - 95 + - Leadtek VC100 + - em2861 + - 0413:6f07 + * - 96 + - Terratec Cinergy T2 Stick HD + - em28178 + - eb1a:8179 + * - 97 + - Elgato EyeTV Hybrid 2008 INT + - em2884 + - 0fd9:0018 + * - 98 + - PLEX PX-BCUD + - em28178 + - 3275:0085 + * - 99 + - Hauppauge WinTV-dualHD DVB + - em28174 + - 2040:0265 + * - 100 + - Hauppauge WinTV-dualHD 01595 ATSC/QAM + - em28174 + - 2040:026d + * - 101 + - Terratec Cinergy H6 rev. 2 + - em2884 + - 0ccd:10b2 diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst index 10f2ce42ece2..679238e786a7 100644 --- a/Documentation/media/v4l-drivers/index.rst +++ b/Documentation/media/v4l-drivers/index.rst @@ -21,7 +21,9 @@ more details. For more details see the file COPYING in the source distribution of Linux. -.. class:: toc-title +.. only:: html + + .. class:: toc-title Table of Contents @@ -50,6 +52,7 @@ For more details see the file COPYING in the source distribution of Linux. philips pvrusb2 pxa_camera + qcom_camss radiotrack rcar-fdp1 saa7134 diff --git a/Documentation/media/v4l-drivers/ivtv-cardlist.rst b/Documentation/media/v4l-drivers/ivtv-cardlist.rst index 754ffa820b4c..022dca80c2c8 100644 --- a/Documentation/media/v4l-drivers/ivtv-cardlist.rst +++ b/Documentation/media/v4l-drivers/ivtv-cardlist.rst @@ -1,38 +1,137 @@ IVTV cards list =============== -=========== ============================================================= ==================================================== -Card number Card name PCI IDs -=========== ============================================================= ==================================================== -0 Hauppauge WinTV PVR-250 IVTV16 104d:813d -1 Hauppauge WinTV PVR-350 IVTV16 104d:813d -2 Hauppauge WinTV PVR-150 IVTV16 104d:813d -3 AVerMedia M179 IVTV15 1461:a3cf, IVTV15 1461:a3ce -4 Yuan MPG600, Kuroutoshikou ITVC16-STVLP IVTV16 12ab:fff3, IVTV16 12ab:ffff -5 YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI IVTV15 10fc:40a0 -6 Yuan PG600, Diamond PVR-550 IVTV16 ff92:0070, IVTV16 ffab:0600 -7 Adaptec VideOh! AVC-2410 IVTV16 9005:0093 -8 Adaptec VideOh! AVC-2010 IVTV16 9005:0092 -9 Nagase Transgear 5000TV IVTV16 1461:bfff -10 AOpen VA2000MAX-SNT6 IVTV16 0000:ff5f -11 Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP IVTV16 12ab:0600, IVTV16 fbab:0600, IVTV16 1154:0523 -12 I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) IVTV16 10fc:d01e, IVTV16 10fc:d038, IVTV16 10fc:d039 -13 I/O Data GV-MVP/RX2E IVTV16 10fc:d025 -14 GotView PCI DVD IVTV16 12ab:0600 -15 GotView PCI DVD2 Deluxe IVTV16 ffac:0600 -16 Yuan MPC622 IVTV16 ff01:d998 -17 Digital Cowboy DCT-MTVP1 IVTV16 1461:bfff -18 Yuan PG600-2, GotView PCI DVD Lite IVTV16 ffab:0600, IVTV16 ffad:0600 -19 Club3D ZAP-TV1x01 IVTV16 ffab:0600 -20 AVerTV MCE 116 Plus IVTV16 1461:c439 -21 ASUS Falcon2 IVTV16 1043:4b66, IVTV16 1043:462e, IVTV16 1043:4b2e -22 AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner IVTV16 1461:c034, IVTV16 1461:c035 -23 AVerMedia EZMaker PCI Deluxe IVTV16 1461:c03f -24 AVerMedia M104 IVTV16 1461:c136 -25 Buffalo PC-MV5L/PCI IVTV16 1154:052b -26 AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner IVTV16 1461:c019, IVTV16 1461:c01b -27 Sony VAIO Giga Pocket (ENX Kikyou) IVTV16 104d:813d -28 Hauppauge WinTV PVR-350 (V1) IVTV16 104d:813d -29 Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR) IVTV16 104d:813d -30 Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS) IVTV16 104d:813d -=========== ============================================================= ==================================================== +.. tabularcolumns:: |p{1.4cm}|p{12.7cm}|p{3.4cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - Hauppauge WinTV PVR-250 + - IVTV16 104d:813d + + * - 1 + - Hauppauge WinTV PVR-350 + - IVTV16 104d:813d + + * - 2 + - Hauppauge WinTV PVR-150 + - IVTV16 104d:813d + + * - 3 + - AVerMedia M179 + - IVTV15 1461:a3cf, IVTV15 1461:a3ce + + * - 4 + - Yuan MPG600, Kuroutoshikou ITVC16-STVLP + - IVTV16 12ab:fff3, IVTV16 12ab:ffff + + * - 5 + - YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI + - IVTV15 10fc:40a0 + + * - 6 + - Yuan PG600, Diamond PVR-550 + - IVTV16 ff92:0070, IVTV16 ffab:0600 + + * - 7 + - Adaptec VideOh! AVC-2410 + - IVTV16 9005:0093 + + * - 8 + - Adaptec VideOh! AVC-2010 + - IVTV16 9005:0092 + + * - 9 + - Nagase Transgear 5000TV + - IVTV16 1461:bfff + + * - 10 + - AOpen VA2000MAX-SNT6 + - IVTV16 0000:ff5f + + * - 11 + - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP + - IVTV16 12ab:0600, IVTV16 fbab:0600, IVTV16 1154:0523 + + * - 12 + - I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) + - IVTV16 10fc:d01e, IVTV16 10fc:d038, IVTV16 10fc:d039 + + * - 13 + - I/O Data GV-MVP/RX2E + - IVTV16 10fc:d025 + + * - 14 + - GotView PCI DVD + - IVTV16 12ab:0600 + + * - 15 + - GotView PCI DVD2 Deluxe + - IVTV16 ffac:0600 + + * - 16 + - Yuan MPC622 + - IVTV16 ff01:d998 + + * - 17 + - Digital Cowboy DCT-MTVP1 + - IVTV16 1461:bfff + + * - 18 + - Yuan PG600-2, GotView PCI DVD Lite + - IVTV16 ffab:0600, IVTV16 ffad:0600 + + * - 19 + - Club3D ZAP-TV1x01 + - IVTV16 ffab:0600 + + * - 20 + - AVerTV MCE 116 Plus + - IVTV16 1461:c439 + + * - 21 + - ASUS Falcon2 + - IVTV16 1043:4b66, IVTV16 1043:462e, IVTV16 1043:4b2e + + * - 22 + - AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner + - IVTV16 1461:c034, IVTV16 1461:c035 + + * - 23 + - AVerMedia EZMaker PCI Deluxe + - IVTV16 1461:c03f + + * - 24 + - AVerMedia M104 + - IVTV16 1461:c136 + + * - 25 + - Buffalo PC-MV5L/PCI + - IVTV16 1154:052b + + * - 26 + - AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner + - IVTV16 1461:c019, IVTV16 1461:c01b + + * - 27 + - Sony VAIO Giga Pocket (ENX Kikyou) + - IVTV16 104d:813d + + * - 28 + - Hauppauge WinTV PVR-350 (V1) + - IVTV16 104d:813d + + * - 29 + - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR) + - IVTV16 104d:813d + + * - 30 + - Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS) + - IVTV16 104d:813d diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst new file mode 100644 index 000000000000..9e66b7b5770f --- /dev/null +++ b/Documentation/media/v4l-drivers/qcom_camss.rst @@ -0,0 +1,156 @@ +.. include:: <isonum.txt> + +Qualcomm Camera Subsystem driver +================================ + +Introduction +------------ + +This file documents the Qualcomm Camera Subsystem driver located under +drivers/media/platform/qcom/camss-8x16. + +The current version of the driver supports the Camera Subsystem found on +Qualcomm MSM8916 and APQ8016 processors. + +The driver implements V4L2, Media controller and V4L2 subdev interfaces. +Camera sensor using V4L2 subdev interface in the kernel is supported. + +The driver is implemented using as a reference the Qualcomm Camera Subsystem +driver for Android as found in Code Aurora [#f1]_. + + +Qualcomm Camera Subsystem hardware +---------------------------------- + +The Camera Subsystem hardware found on 8x16 processors and supported by the +driver consists of: + +- 2 CSIPHY modules. They handle the Physical layer of the CSI2 receivers. + A separate camera sensor can be connected to each of the CSIPHY module; +- 2 CSID (CSI Decoder) modules. They handle the Protocol and Application layer + of the CSI2 receivers. A CSID can decode data stream from any of the CSIPHY. + Each CSID also contains a TG (Test Generator) block which can generate + artificial input data for test purposes; +- ISPIF (ISP Interface) module. Handles the routing of the data streams from + the CSIDs to the inputs of the VFE; +- VFE (Video Front End) module. Contains a pipeline of image processing hardware + blocks. The VFE has different input interfaces. The PIX (Pixel) input + interface feeds the input data to the image processing pipeline. The image + processing pipeline contains also a scale and crop module at the end. Three + RDI (Raw Dump Interface) input interfaces bypass the image processing + pipeline. The VFE also contains the AXI bus interface which writes the output + data to memory. + + +Supported functionality +----------------------- + +The current version of the driver supports: + +- Input from camera sensor via CSIPHY; +- Generation of test input data by the TG in CSID; +- RDI interface of VFE - raw dump of the input data to memory. + + Supported formats: + + - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY); + - MIPI RAW8 (8bit Bayer RAW - V4L2_PIX_FMT_SRGGB8 / + V4L2_PIX_FMT_SGRBG8 / V4L2_PIX_FMT_SGBRG8 / V4L2_PIX_FMT_SBGGR8); + - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / + V4L2_PIX_FMT_SGBRG10P / V4L2_PIX_FMT_SGRBG10P / V4L2_PIX_FMT_SRGGB10P); + - MIPI RAW12 (12bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB12P / + V4L2_PIX_FMT_SGBRG12P / V4L2_PIX_FMT_SGRBG12P / V4L2_PIX_FMT_SRGGB12P). + +- PIX interface of VFE + + - Format conversion of the input data. + + Supported input formats: + + - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY). + + Supported output formats: + + - NV12/NV21 (two plane YUV 4:2:0 - V4L2_PIX_FMT_NV12 / V4L2_PIX_FMT_NV21); + - NV16/NV61 (two plane YUV 4:2:2 - V4L2_PIX_FMT_NV16 / V4L2_PIX_FMT_NV61). + + - Scaling support. Configuration of the VFE Encoder Scale module + for downscalling with ratio up to 16x. + + - Cropping support. Configuration of the VFE Encoder Crop module. + +- Concurrent and independent usage of two data inputs - could be camera sensors + and/or TG. + + +Driver Architecture and Design +------------------------------ + +The driver implements the V4L2 subdev interface. With the goal to model the +hardware links between the modules and to expose a clean, logical and usable +interface, the driver is split into V4L2 sub-devices as follows: + +- 2 CSIPHY sub-devices - each CSIPHY is represented by a single sub-device; +- 2 CSID sub-devices - each CSID is represented by a single sub-device; +- 2 ISPIF sub-devices - ISPIF is represented by a number of sub-devices equal + to the number of CSID sub-devices; +- 4 VFE sub-devices - VFE is represented by a number of sub-devices equal to + the number of the input interfaces (3 RDI and 1 PIX). + +The considerations to split the driver in this particular way are as follows: + +- representing CSIPHY and CSID modules by a separate sub-device for each module + allows to model the hardware links between these modules; +- representing VFE by a separate sub-devices for each input interface allows + to use the input interfaces concurently and independently as this is + supported by the hardware; +- representing ISPIF by a number of sub-devices equal to the number of CSID + sub-devices allows to create linear media controller pipelines when using two + cameras simultaneously. This avoids branches in the pipelines which otherwise + will require a) userspace and b) media framework (e.g. power on/off + operations) to make assumptions about the data flow from a sink pad to a + source pad on a single media entity. + +Each VFE sub-device is linked to a separate video device node. + +The media controller pipeline graph is as follows (with connected two OV5645 +camera sensors): + +.. _qcom_camss_graph: + +.. kernel-figure:: qcom_camss_graph.dot + :alt: qcom_camss_graph.dot + :align: center + + Media pipeline graph + + +Implementation +-------------- + +Runtime configuration of the hardware (updating settings while streaming) is +not required to implement the currently supported functionality. The complete +configuration on each hardware module is applied on STREAMON ioctl based on +the current active media links, formats and controls set. + +The output size of the scaler module in the VFE is configured with the actual +compose selection rectangle on the sink pad of the 'msm_vfe0_pix' entity. + +The crop output area of the crop module in the VFE is configured with the actual +crop selection rectangle on the source pad of the 'msm_vfe0_pix' entity. + + +Documentation +------------- + +APQ8016 Specification: +https://developer.qualcomm.com/download/sd410/snapdragon-410-processor-device-specification.pdf +Referenced 2016-11-24. + + +References +---------- + +.. [#f1] https://source.codeaurora.org/quic/la/kernel/msm-3.10/ diff --git a/Documentation/media/v4l-drivers/qcom_camss_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_graph.dot new file mode 100644 index 000000000000..827fc7112c1e --- /dev/null +++ b/Documentation/media/v4l-drivers/qcom_camss_graph.dot @@ -0,0 +1,41 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n00000007:port0 [style=dashed] + n00000001:port1 -> n0000000a:port0 [style=dashed] + n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000004:port1 -> n00000007:port0 [style=dashed] + n00000004:port1 -> n0000000a:port0 [style=dashed] + n00000007 [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000007:port1 -> n0000000d:port0 [style=dashed] + n00000007:port1 -> n00000010:port0 [style=dashed] + n0000000a [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000a:port1 -> n0000000d:port0 [style=dashed] + n0000000a:port1 -> n00000010:port0 [style=dashed] + n0000000d [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000d:port1 -> n00000013:port0 [style=dashed] + n0000000d:port1 -> n0000001c:port0 [style=dashed] + n0000000d:port1 -> n00000025:port0 [style=dashed] + n0000000d:port1 -> n0000002e:port0 [style=dashed] + n00000010 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000010:port1 -> n00000013:port0 [style=dashed] + n00000010:port1 -> n0000001c:port0 [style=dashed] + n00000010:port1 -> n00000025:port0 [style=dashed] + n00000010:port1 -> n0000002e:port0 [style=dashed] + n00000013 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000013:port1 -> n00000016 [style=bold] + n00000016 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000001c [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001c:port1 -> n0000001f [style=bold] + n0000001f [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000025 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000025:port1 -> n00000028 [style=bold] + n00000028 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n0000002e [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000002e:port1 -> n00000031 [style=bold] + n00000031 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000057 [label="{{} | ov5645 1-0076\n/dev/v4l-subdev10 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000057:port0 -> n00000001:port0 [style=bold] + n00000059 [label="{{} | ov5645 1-0074\n/dev/v4l-subdev11 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000059:port0 -> n00000004:port0 [style=bold] +} diff --git a/Documentation/media/v4l-drivers/saa7134-cardlist.rst b/Documentation/media/v4l-drivers/saa7134-cardlist.rst index a5efa8f4b8e4..6e4c35cbaabf 100644 --- a/Documentation/media/v4l-drivers/saa7134-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7134-cardlist.rst @@ -1,204 +1,801 @@ SAA7134 cards list ================== -=========== ======================================================= ================================================================ -Card number Card name PCI IDs -=========== ======================================================= ================================================================ -0 UNKNOWN/GENERIC -1 Proteus Pro [philips reference design] 1131:2001, 1131:2001 -2 LifeView FlyVIDEO3000 5168:0138, 4e42:0138 -3 LifeView/Typhoon FlyVIDEO2000 5168:0138, 4e42:0138 -4 EMPRESS 1131:6752 -5 SKNet Monster TV 1131:4e85 -6 Tevion MD 9717 -7 KNC One TV-Station RDS / Typhoon TV Tuner RDS 1131:fe01, 1894:fe01 -8 Terratec Cinergy 400 TV 153b:1142 -9 Medion 5044 -10 Kworld/KuroutoShikou SAA7130-TVPCI -11 Terratec Cinergy 600 TV 153b:1143 -12 Medion 7134 16be:0003, 16be:5000 -13 Typhoon TV+Radio 90031 -14 ELSA EX-VISION 300TV 1048:226b -15 ELSA EX-VISION 500TV 1048:226a -16 ASUS TV-FM 7134 1043:4842, 1043:4830, 1043:4840 -17 AOPEN VA1000 POWER 1131:7133 -18 BMK MPEX No Tuner -19 Compro VideoMate TV 185b:c100 -20 Matrox CronosPlus 102B:48d0 -21 10MOONS PCI TV CAPTURE CARD 1131:2001 -22 AverMedia M156 / Medion 2819 1461:a70b -23 BMK MPEX Tuner -24 KNC One TV-Station DVR 1894:a006 -25 ASUS TV-FM 7133 1043:4843 -26 Pinnacle PCTV Stereo (saa7134) 11bd:002b -27 Manli MuchTV M-TV002 -28 Manli MuchTV M-TV001 -29 Nagase Sangyo TransGear 3000TV 1461:050c -30 Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) 1019:4cb4 -31 Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM) 1019:4cb5 -32 AVACS SmartTV -33 AVerMedia DVD EZMaker 1461:10ff -34 Noval Prime TV 7133 -35 AverMedia AverTV Studio 305 1461:2115 -36 UPMOST PURPLE TV 12ab:0800 -37 Items MuchTV Plus / IT-005 -38 Terratec Cinergy 200 TV 153b:1152 -39 LifeView FlyTV Platinum Mini 5168:0212, 4e42:0212, 5169:1502 -40 Compro VideoMate TV PVR/FM 185b:c100 -41 Compro VideoMate TV Gold+ 185b:c100 -42 Sabrent SBT-TVFM (saa7130) -43 :Zolid Xpert TV7134 -44 Empire PCI TV-Radio LE -45 Avermedia AVerTV Studio 307 1461:9715 -46 AVerMedia Cardbus TV/Radio (E500) 1461:d6ee -47 Terratec Cinergy 400 mobile 153b:1162 -48 Terratec Cinergy 600 TV MK3 153b:1158 -49 Compro VideoMate Gold+ Pal 185b:c200 -50 Pinnacle PCTV 300i DVB-T + PAL 11bd:002d -51 ProVideo PV952 1540:9524 -52 AverMedia AverTV/305 1461:2108 -53 ASUS TV-FM 7135 1043:4845 -54 LifeView FlyTV Platinum FM / Gold 5168:0214, 5168:5214, 1489:0214, 5168:0304 -55 LifeView FlyDVB-T DUO / MSI TV@nywhere Duo 5168:0306, 4E42:0306 -56 Avermedia AVerTV 307 1461:a70a -57 Avermedia AVerTV GO 007 FM 1461:f31f -58 ADS Tech Instant TV (saa7135) 1421:0350, 1421:0351, 1421:0370, 1421:1370 -59 Kworld/Tevion V-Stream Xpert TV PVR7134 -60 LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus 5168:0502, 4e42:0502, 1489:0502 -61 Philips TOUGH DVB-T reference design 1131:2004 -62 Compro VideoMate TV Gold+II -63 Kworld Xpert TV PVR7134 -64 FlyTV mini Asus Digimatrix 1043:0210 -65 V-Stream Studio TV Terminator -66 Yuan TUN-900 (saa7135) -67 Beholder BeholdTV 409 FM 0000:4091 -68 GoTView 7135 PCI 5456:7135 -69 Philips EUROPA V3 reference design 1131:2004 -70 Compro Videomate DVB-T300 185b:c900 -71 Compro Videomate DVB-T200 185b:c901 -72 RTD Embedded Technologies VFG7350 1435:7350 -73 RTD Embedded Technologies VFG7330 1435:7330 -74 LifeView FlyTV Platinum Mini2 14c0:1212 -75 AVerMedia AVerTVHD MCE A180 1461:1044 -76 SKNet MonsterTV Mobile 1131:4ee9 -77 Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e -78 ASUSTeK P7131 Dual 1043:4862 -79 Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) -80 ASUS Digimatrix TV 1043:0210 -81 Philips Tiger reference design 1131:2018 -82 MSI TV@Anywhere plus 1462:6231, 1462:8624 -83 Terratec Cinergy 250 PCI TV 153b:1160 -84 LifeView FlyDVB Trio 5168:0319 -85 AverTV DVB-T 777 1461:2c05, 1461:2c05 -86 LifeView FlyDVB-T / Genius VideoWonder DVB-T 5168:0301, 1489:0301 -87 ADS Instant TV Duo Cardbus PTV331 0331:1421 -88 Tevion/KWorld DVB-T 220RF 17de:7201 -89 ELSA EX-VISION 700TV 1048:226c -90 Kworld ATSC110/115 17de:7350, 17de:7352 -91 AVerMedia A169 B 1461:7360 -92 AVerMedia A169 B1 1461:6360 -93 Medion 7134 Bridge #2 16be:0005 -94 LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB 5168:3306, 5168:3502, 5168:3307, 4e42:3502 -95 LifeView FlyVIDEO3000 (NTSC) 5169:0138 -96 Medion Md8800 Quadro 16be:0007, 16be:0008, 16be:000d -97 LifeView FlyDVB-S /Acorp TV134DS 5168:0300, 4e42:0300 -98 Proteus Pro 2309 0919:2003 -99 AVerMedia TV Hybrid A16AR 1461:2c00 -100 Asus Europa2 OEM 1043:4860 -101 Pinnacle PCTV 310i 11bd:002f -102 Avermedia AVerTV Studio 507 1461:9715 -103 Compro Videomate DVB-T200A -104 Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700, 0070:6701, 0070:6702, 0070:6703, 0070:6704, 0070:6705 -105 Terratec Cinergy HT PCMCIA 153b:1172 -106 Encore ENLTV 1131:2342, 1131:2341, 3016:2344 -107 Encore ENLTV-FM 1131:230f -108 Terratec Cinergy HT PCI 153b:1175 -109 Philips Tiger - S Reference design -110 Avermedia M102 1461:f31e -111 ASUS P7131 4871 1043:4871 -112 ASUSTeK P7131 Hybrid 1043:4876 -113 Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) 1019:4cb6 -114 KWorld DVB-T 210 17de:7250 -115 Sabrent PCMCIA TV-PCB05 0919:2003 -116 10MOONS TM300 TV Card 1131:2304 -117 Avermedia Super 007 1461:f01d -118 Beholder BeholdTV 401 0000:4016 -119 Beholder BeholdTV 403 0000:4036 -120 Beholder BeholdTV 403 FM 0000:4037 -121 Beholder BeholdTV 405 0000:4050 -122 Beholder BeholdTV 405 FM 0000:4051 -123 Beholder BeholdTV 407 0000:4070 -124 Beholder BeholdTV 407 FM 0000:4071 -125 Beholder BeholdTV 409 0000:4090 -126 Beholder BeholdTV 505 FM 5ace:5050 -127 Beholder BeholdTV 507 FM / BeholdTV 509 FM 5ace:5070, 5ace:5090 -128 Beholder BeholdTV Columbus TV/FM 0000:5201 -129 Beholder BeholdTV 607 FM 5ace:6070 -130 Beholder BeholdTV M6 5ace:6190 -131 Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 -132 Genius TVGO AM11MCE -133 NXP Snake DVB-S reference design -134 Medion/Creatix CTX953 Hybrid 16be:0010 -135 MSI TV@nywhere A/D v1.1 1462:8625 -136 AVerMedia Cardbus TV/Radio (E506R) 1461:f436 -137 AVerMedia Hybrid TV/Radio (A16D) 1461:f936 -138 Avermedia M115 1461:a836 -139 Compro VideoMate T750 185b:c900 -140 Avermedia DVB-S Pro A700 1461:a7a1 -141 Avermedia DVB-S Hybrid+FM A700 1461:a7a2 -142 Beholder BeholdTV H6 5ace:6290 -143 Beholder BeholdTV M63 5ace:6191 -144 Beholder BeholdTV M6 Extra 5ace:6193 -145 AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636, 1461:f736 -146 ASUSTeK P7131 Analog -147 Asus Tiger 3in1 1043:4878 -148 Encore ENLTV-FM v5.3 1a7f:2008 -149 Avermedia PCI pure analog (M135A) 1461:f11d -150 Zogis Real Angel 220 -151 ADS Tech Instant HDTV 1421:0380 -152 Asus Tiger Rev:1.00 1043:4857 -153 Kworld Plus TV Analog Lite PCI 17de:7128 -154 Avermedia AVerTV GO 007 FM Plus 1461:f31d -155 Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706, 0070:6708 -156 Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707, 0070:6709, 0070:670a -157 Avermedia AVerTV Studio 507UA 1461:a11b -158 AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 -159 Beholder BeholdTV 505 RDS 0000:505B -160 Beholder BeholdTV 507 RDS 0000:5071 -161 Beholder BeholdTV 507 RDS 0000:507B -162 Beholder BeholdTV 607 FM 5ace:6071 -163 Beholder BeholdTV 609 FM 5ace:6090 -164 Beholder BeholdTV 609 FM 5ace:6091 -165 Beholder BeholdTV 607 RDS 5ace:6072 -166 Beholder BeholdTV 607 RDS 5ace:6073 -167 Beholder BeholdTV 609 RDS 5ace:6092 -168 Beholder BeholdTV 609 RDS 5ace:6093 -169 Compro VideoMate S350/S300 185b:c900 -170 AverMedia AverTV Studio 505 1461:a115 -171 Beholder BeholdTV X7 5ace:7595 -172 RoverMedia TV Link Pro FM 19d1:0138 -173 Zolid Hybrid TV Tuner PCI 1131:2004 -174 Asus Europa Hybrid OEM 1043:4847 -175 Leadtek Winfast DTV1000S 107d:6655 -176 Beholder BeholdTV 505 RDS 0000:5051 -177 Hawell HW-404M7 -178 Beholder BeholdTV H7 5ace:7190 -179 Beholder BeholdTV A7 5ace:7090 -180 Avermedia PCI M733A 1461:4155, 1461:4255 -181 TechoTrend TT-budget T-3000 13c2:2804 -182 Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid 17de:b136 -183 Compro VideoMate Vista M1F 185b:c900 -184 Encore ENLTV-FM 3 1a7f:2108 -185 MagicPro ProHDTV Pro2 DMB-TH/Hybrid 17de:d136 -186 Beholder BeholdTV 501 5ace:5010 -187 Beholder BeholdTV 503 FM 5ace:5030 -188 Sensoray 811/911 6000:0811, 6000:0911 -189 Kworld PC150-U 17de:a134 -190 Asus My Cinema PS3-100 1043:48cd -191 Hawell HW-9004V1 -192 AverMedia AverTV Satellite Hybrid+FM A706 1461:2055 -193 WIS Voyager or compatible 1905:7007 -194 AverMedia AverTV/505 1461:a10a -195 Leadtek Winfast TV2100 FM 107d:6f3a -196 SnaZio* TVPVR PRO 1779:13cf -=========== ======================================================= ================================================================ +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - UNKNOWN/GENERIC + - + + * - 1 + - Proteus Pro [philips reference design] + - 1131:2001, 1131:2001 + + * - 2 + - LifeView FlyVIDEO3000 + - 5168:0138, 4e42:0138 + + * - 3 + - LifeView/Typhoon FlyVIDEO2000 + - 5168:0138, 4e42:0138 + + * - 4 + - EMPRESS + - 1131:6752 + + * - 5 + - SKNet Monster TV + - 1131:4e85 + + * - 6 + - Tevion MD 9717 + - + + * - 7 + - KNC One TV-Station RDS / Typhoon TV Tuner RDS + - 1131:fe01, 1894:fe01 + + * - 8 + - Terratec Cinergy 400 TV + - 153b:1142 + + * - 9 + - Medion 5044 + - + + * - 10 + - Kworld/KuroutoShikou SAA7130-TVPCI + - + + * - 11 + - Terratec Cinergy 600 TV + - 153b:1143 + + * - 12 + - Medion 7134 + - 16be:0003, 16be:5000 + + * - 13 + - Typhoon TV+Radio 90031 + - + + * - 14 + - ELSA EX-VISION 300TV + - 1048:226b + + * - 15 + - ELSA EX-VISION 500TV + - 1048:226a + + * - 16 + - ASUS TV-FM 7134 + - 1043:4842, 1043:4830, 1043:4840 + + * - 17 + - AOPEN VA1000 POWER + - 1131:7133 + + * - 18 + - BMK MPEX No Tuner + - + + * - 19 + - Compro VideoMate TV + - 185b:c100 + + * - 20 + - Matrox CronosPlus + - 102B:48d0 + + * - 21 + - 10MOONS PCI TV CAPTURE CARD + - 1131:2001 + + * - 22 + - AverMedia M156 / Medion 2819 + - 1461:a70b + + * - 23 + - BMK MPEX Tuner + - + + * - 24 + - KNC One TV-Station DVR + - 1894:a006 + + * - 25 + - ASUS TV-FM 7133 + - 1043:4843 + + * - 26 + - Pinnacle PCTV Stereo (saa7134) + - 11bd:002b + + * - 27 + - Manli MuchTV M-TV002 + - + + * - 28 + - Manli MuchTV M-TV001 + - + + * - 29 + - Nagase Sangyo TransGear 3000TV + - 1461:050c + + * - 30 + - Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) + - 1019:4cb4 + + * - 31 + - Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM) + - 1019:4cb5 + + * - 32 + - AVACS SmartTV + - + + * - 33 + - AVerMedia DVD EZMaker + - 1461:10ff + + * - 34 + - Noval Prime TV 7133 + - + + * - 35 + - AverMedia AverTV Studio 305 + - 1461:2115 + + * - 36 + - UPMOST PURPLE TV + - 12ab:0800 + + * - 37 + - Items MuchTV Plus / IT-005 + - + + * - 38 + - Terratec Cinergy 200 TV + - 153b:1152 + + * - 39 + - LifeView FlyTV Platinum Mini + - 5168:0212, 4e42:0212, 5169:1502 + + * - 40 + - Compro VideoMate TV PVR/FM + - 185b:c100 + + * - 41 + - Compro VideoMate TV Gold+ + - 185b:c100 + + * - 42 + - Sabrent SBT-TVFM (saa7130) + - + + * - 43 + - :Zolid Xpert TV7134 + - + + * - 44 + - Empire PCI TV-Radio LE + - + + * - 45 + - Avermedia AVerTV Studio 307 + - 1461:9715 + + * - 46 + - AVerMedia Cardbus TV/Radio (E500) + - 1461:d6ee + + * - 47 + - Terratec Cinergy 400 mobile + - 153b:1162 + + * - 48 + - Terratec Cinergy 600 TV MK3 + - 153b:1158 + + * - 49 + - Compro VideoMate Gold+ Pal + - 185b:c200 + + * - 50 + - Pinnacle PCTV 300i DVB-T + PAL + - 11bd:002d + + * - 51 + - ProVideo PV952 + - 1540:9524 + + * - 52 + - AverMedia AverTV/305 + - 1461:2108 + + * - 53 + - ASUS TV-FM 7135 + - 1043:4845 + + * - 54 + - LifeView FlyTV Platinum FM / Gold + - 5168:0214, 5168:5214, 1489:0214, 5168:0304 + + * - 55 + - LifeView FlyDVB-T DUO / MSI TV@nywhere Duo + - 5168:0306, 4E42:0306 + + * - 56 + - Avermedia AVerTV 307 + - 1461:a70a + + * - 57 + - Avermedia AVerTV GO 007 FM + - 1461:f31f + + * - 58 + - ADS Tech Instant TV (saa7135) + - 1421:0350, 1421:0351, 1421:0370, 1421:1370 + + * - 59 + - Kworld/Tevion V-Stream Xpert TV PVR7134 + - + + * - 60 + - LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus + - 5168:0502, 4e42:0502, 1489:0502 + + * - 61 + - Philips TOUGH DVB-T reference design + - 1131:2004 + + * - 62 + - Compro VideoMate TV Gold+II + - + + * - 63 + - Kworld Xpert TV PVR7134 + - + + * - 64 + - FlyTV mini Asus Digimatrix + - 1043:0210 + + * - 65 + - V-Stream Studio TV Terminator + - + + * - 66 + - Yuan TUN-900 (saa7135) + - + + * - 67 + - Beholder BeholdTV 409 FM + - 0000:4091 + + * - 68 + - GoTView 7135 PCI + - 5456:7135 + + * - 69 + - Philips EUROPA V3 reference design + - 1131:2004 + + * - 70 + - Compro Videomate DVB-T300 + - 185b:c900 + + * - 71 + - Compro Videomate DVB-T200 + - 185b:c901 + + * - 72 + - RTD Embedded Technologies VFG7350 + - 1435:7350 + + * - 73 + - RTD Embedded Technologies VFG7330 + - 1435:7330 + + * - 74 + - LifeView FlyTV Platinum Mini2 + - 14c0:1212 + + * - 75 + - AVerMedia AVerTVHD MCE A180 + - 1461:1044 + + * - 76 + - SKNet MonsterTV Mobile + - 1131:4ee9 + + * - 77 + - Pinnacle PCTV 40i/50i/110i (saa7133) + - 11bd:002e + + * - 78 + - ASUSTeK P7131 Dual + - 1043:4862 + + * - 79 + - Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) + - + + * - 80 + - ASUS Digimatrix TV + - 1043:0210 + + * - 81 + - Philips Tiger reference design + - 1131:2018 + + * - 82 + - MSI TV@Anywhere plus + - 1462:6231, 1462:8624 + + * - 83 + - Terratec Cinergy 250 PCI TV + - 153b:1160 + + * - 84 + - LifeView FlyDVB Trio + - 5168:0319 + + * - 85 + - AverTV DVB-T 777 + - 1461:2c05, 1461:2c05 + + * - 86 + - LifeView FlyDVB-T / Genius VideoWonder DVB-T + - 5168:0301, 1489:0301 + + * - 87 + - ADS Instant TV Duo Cardbus PTV331 + - 0331:1421 + + * - 88 + - Tevion/KWorld DVB-T 220RF + - 17de:7201 + + * - 89 + - ELSA EX-VISION 700TV + - 1048:226c + + * - 90 + - Kworld ATSC110/115 + - 17de:7350, 17de:7352 + + * - 91 + - AVerMedia A169 B + - 1461:7360 + + * - 92 + - AVerMedia A169 B1 + - 1461:6360 + + * - 93 + - Medion 7134 Bridge #2 + - 16be:0005 + + * - 94 + - LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB + - 5168:3306, 5168:3502, 5168:3307, 4e42:3502 + + * - 95 + - LifeView FlyVIDEO3000 (NTSC) + - 5169:0138 + + * - 96 + - Medion Md8800 Quadro + - 16be:0007, 16be:0008, 16be:000d + + * - 97 + - LifeView FlyDVB-S /Acorp TV134DS + - 5168:0300, 4e42:0300 + + * - 98 + - Proteus Pro 2309 + - 0919:2003 + + * - 99 + - AVerMedia TV Hybrid A16AR + - 1461:2c00 + + * - 100 + - Asus Europa2 OEM + - 1043:4860 + + * - 101 + - Pinnacle PCTV 310i + - 11bd:002f + + * - 102 + - Avermedia AVerTV Studio 507 + - 1461:9715 + + * - 103 + - Compro Videomate DVB-T200A + - + + * - 104 + - Hauppauge WinTV-HVR1110 DVB-T/Hybrid + - 0070:6700, 0070:6701, 0070:6702, 0070:6703, 0070:6704, 0070:6705 + + * - 105 + - Terratec Cinergy HT PCMCIA + - 153b:1172 + + * - 106 + - Encore ENLTV + - 1131:2342, 1131:2341, 3016:2344 + + * - 107 + - Encore ENLTV-FM + - 1131:230f + + * - 108 + - Terratec Cinergy HT PCI + - 153b:1175 + + * - 109 + - Philips Tiger - S Reference design + - + + * - 110 + - Avermedia M102 + - 1461:f31e + + * - 111 + - ASUS P7131 4871 + - 1043:4871 + + * - 112 + - ASUSTeK P7131 Hybrid + - 1043:4876 + + * - 113 + - Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) + - 1019:4cb6 + + * - 114 + - KWorld DVB-T 210 + - 17de:7250 + + * - 115 + - Sabrent PCMCIA TV-PCB05 + - 0919:2003 + + * - 116 + - 10MOONS TM300 TV Card + - 1131:2304 + + * - 117 + - Avermedia Super 007 + - 1461:f01d + + * - 118 + - Beholder BeholdTV 401 + - 0000:4016 + + * - 119 + - Beholder BeholdTV 403 + - 0000:4036 + + * - 120 + - Beholder BeholdTV 403 FM + - 0000:4037 + + * - 121 + - Beholder BeholdTV 405 + - 0000:4050 + + * - 122 + - Beholder BeholdTV 405 FM + - 0000:4051 + + * - 123 + - Beholder BeholdTV 407 + - 0000:4070 + + * - 124 + - Beholder BeholdTV 407 FM + - 0000:4071 + + * - 125 + - Beholder BeholdTV 409 + - 0000:4090 + + * - 126 + - Beholder BeholdTV 505 FM + - 5ace:5050 + + * - 127 + - Beholder BeholdTV 507 FM / BeholdTV 509 FM + - 5ace:5070, 5ace:5090 + + * - 128 + - Beholder BeholdTV Columbus TV/FM + - 0000:5201 + + * - 129 + - Beholder BeholdTV 607 FM + - 5ace:6070 + + * - 130 + - Beholder BeholdTV M6 + - 5ace:6190 + + * - 131 + - Twinhan Hybrid DTV-DVB 3056 PCI + - 1822:0022 + + * - 132 + - Genius TVGO AM11MCE + - + + * - 133 + - NXP Snake DVB-S reference design + - + + * - 134 + - Medion/Creatix CTX953 Hybrid + - 16be:0010 + + * - 135 + - MSI TV@nywhere A/D v1.1 + - 1462:8625 + + * - 136 + - AVerMedia Cardbus TV/Radio (E506R) + - 1461:f436 + + * - 137 + - AVerMedia Hybrid TV/Radio (A16D) + - 1461:f936 + + * - 138 + - Avermedia M115 + - 1461:a836 + + * - 139 + - Compro VideoMate T750 + - 185b:c900 + + * - 140 + - Avermedia DVB-S Pro A700 + - 1461:a7a1 + + * - 141 + - Avermedia DVB-S Hybrid+FM A700 + - 1461:a7a2 + + * - 142 + - Beholder BeholdTV H6 + - 5ace:6290 + + * - 143 + - Beholder BeholdTV M63 + - 5ace:6191 + + * - 144 + - Beholder BeholdTV M6 Extra + - 5ace:6193 + + * - 145 + - AVerMedia MiniPCI DVB-T Hybrid M103 + - 1461:f636, 1461:f736 + + * - 146 + - ASUSTeK P7131 Analog + - + + * - 147 + - Asus Tiger 3in1 + - 1043:4878 + + * - 148 + - Encore ENLTV-FM v5.3 + - 1a7f:2008 + + * - 149 + - Avermedia PCI pure analog (M135A) + - 1461:f11d + + * - 150 + - Zogis Real Angel 220 + - + + * - 151 + - ADS Tech Instant HDTV + - 1421:0380 + + * - 152 + - Asus Tiger Rev:1.00 + - 1043:4857 + + * - 153 + - Kworld Plus TV Analog Lite PCI + - 17de:7128 + + * - 154 + - Avermedia AVerTV GO 007 FM Plus + - 1461:f31d + + * - 155 + - Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid + - 0070:6706, 0070:6708 + + * - 156 + - Hauppauge WinTV-HVR1120 DVB-T/Hybrid + - 0070:6707, 0070:6709, 0070:670a + + * - 157 + - Avermedia AVerTV Studio 507UA + - 1461:a11b + + * - 158 + - AVerMedia Cardbus TV/Radio (E501R) + - 1461:b7e9 + + * - 159 + - Beholder BeholdTV 505 RDS + - 0000:505B + + * - 160 + - Beholder BeholdTV 507 RDS + - 0000:5071 + + * - 161 + - Beholder BeholdTV 507 RDS + - 0000:507B + + * - 162 + - Beholder BeholdTV 607 FM + - 5ace:6071 + + * - 163 + - Beholder BeholdTV 609 FM + - 5ace:6090 + + * - 164 + - Beholder BeholdTV 609 FM + - 5ace:6091 + + * - 165 + - Beholder BeholdTV 607 RDS + - 5ace:6072 + + * - 166 + - Beholder BeholdTV 607 RDS + - 5ace:6073 + + * - 167 + - Beholder BeholdTV 609 RDS + - 5ace:6092 + + * - 168 + - Beholder BeholdTV 609 RDS + - 5ace:6093 + + * - 169 + - Compro VideoMate S350/S300 + - 185b:c900 + + * - 170 + - AverMedia AverTV Studio 505 + - 1461:a115 + + * - 171 + - Beholder BeholdTV X7 + - 5ace:7595 + + * - 172 + - RoverMedia TV Link Pro FM + - 19d1:0138 + + * - 173 + - Zolid Hybrid TV Tuner PCI + - 1131:2004 + + * - 174 + - Asus Europa Hybrid OEM + - 1043:4847 + + * - 175 + - Leadtek Winfast DTV1000S + - 107d:6655 + + * - 176 + - Beholder BeholdTV 505 RDS + - 0000:5051 + + * - 177 + - Hawell HW-404M7 + - + + * - 178 + - Beholder BeholdTV H7 + - 5ace:7190 + + * - 179 + - Beholder BeholdTV A7 + - 5ace:7090 + + * - 180 + - Avermedia PCI M733A + - 1461:4155, 1461:4255 + + * - 181 + - TechoTrend TT-budget T-3000 + - 13c2:2804 + + * - 182 + - Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid + - 17de:b136 + + * - 183 + - Compro VideoMate Vista M1F + - 185b:c900 + + * - 184 + - Encore ENLTV-FM 3 + - 1a7f:2108 + + * - 185 + - MagicPro ProHDTV Pro2 DMB-TH/Hybrid + - 17de:d136 + + * - 186 + - Beholder BeholdTV 501 + - 5ace:5010 + + * - 187 + - Beholder BeholdTV 503 FM + - 5ace:5030 + + * - 188 + - Sensoray 811/911 + - 6000:0811, 6000:0911 + + * - 189 + - Kworld PC150-U + - 17de:a134 + + * - 190 + - Asus My Cinema PS3-100 + - 1043:48cd + + * - 191 + - Hawell HW-9004V1 + - + + * - 192 + - AverMedia AverTV Satellite Hybrid+FM A706 + - 1461:2055 + + * - 193 + - WIS Voyager or compatible + - 1905:7007 + + * - 194 + - AverMedia AverTV/505 + - 1461:a10a + + * - 195 + - Leadtek Winfast TV2100 FM + - 107d:6f3a + + * - 196 + - SnaZio* TVPVR PRO + - 1779:13cf diff --git a/Documentation/media/v4l-drivers/saa7164-cardlist.rst b/Documentation/media/v4l-drivers/saa7164-cardlist.rst index 7d17d38df3bc..e28382ba82e6 100644 --- a/Documentation/media/v4l-drivers/saa7164-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7164-cardlist.rst @@ -1,21 +1,69 @@ SAA7164 cards list ================== -=========== ==================================== ==================== -Card number Card name PCI IDs -=========== ==================================== ==================== -0 Unknown -1 Generic Rev2 -2 Generic Rev3 -3 Hauppauge WinTV-HVR2250 0070:8880, 0070:8810 -4 Hauppauge WinTV-HVR2200 0070:8980 -5 Hauppauge WinTV-HVR2200 0070:8900 -6 Hauppauge WinTV-HVR2200 0070:8901 -7 Hauppauge WinTV-HVR2250 0070:8891, 0070:8851 -8 Hauppauge WinTV-HVR2250 0070:88A1 -9 Hauppauge WinTV-HVR2200 0070:8940 -10 Hauppauge WinTV-HVR2200 0070:8953 -11 Hauppauge WinTV-HVR2255(proto) 0070:f111 -12 Hauppauge WinTV-HVR2255 0070:f111 -13 Hauppauge WinTV-HVR2205 0070:f123, 0070:f120 -=========== ==================================== ==================== +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - PCI IDs + + * - 0 + - Unknown + - + + * - 1 + - Generic Rev2 + - + + * - 2 + - Generic Rev3 + - + + * - 3 + - Hauppauge WinTV-HVR2250 + - 0070:8880, 0070:8810 + + * - 4 + - Hauppauge WinTV-HVR2200 + - 0070:8980 + + * - 5 + - Hauppauge WinTV-HVR2200 + - 0070:8900 + + * - 6 + - Hauppauge WinTV-HVR2200 + - 0070:8901 + + * - 7 + - Hauppauge WinTV-HVR2250 + - 0070:8891, 0070:8851 + + * - 8 + - Hauppauge WinTV-HVR2250 + - 0070:88A1 + + * - 9 + - Hauppauge WinTV-HVR2200 + - 0070:8940 + + * - 10 + - Hauppauge WinTV-HVR2200 + - 0070:8953 + + * - 11 + - Hauppauge WinTV-HVR2255(proto) + - 0070:f111 + + * - 12 + - Hauppauge WinTV-HVR2255 + - 0070:f111 + + * - 13 + - Hauppauge WinTV-HVR2205 + - 0070:f123, 0070:f120 diff --git a/Documentation/media/v4l-drivers/tm6000-cardlist.rst b/Documentation/media/v4l-drivers/tm6000-cardlist.rst index ae2952683ccf..6bd083544457 100644 --- a/Documentation/media/v4l-drivers/tm6000-cardlist.rst +++ b/Documentation/media/v4l-drivers/tm6000-cardlist.rst @@ -1,24 +1,81 @@ TM6000 cards list ================= -=========== ================================================= ========================================== -Card number Card name USB IDs -=========== ================================================= ========================================== -0 Unknown tm6000 video grabber -1 Generic tm5600 board 6000:0001 -2 Generic tm6000 board -3 Generic tm6010 board 6000:0002 -4 10Moons UT 821 -5 10Moons UT 330 -6 ADSTECH Dual TV USB 06e1:f332 -7 Freecom Hybrid Stick / Moka DVB-T Receiver Dual 14aa:0620 -8 ADSTECH Mini Dual TV USB 06e1:b339 -9 Hauppauge WinTV HVR-900H / WinTV USB2-Stick 2040:6600, 2040:6601, 2040:6610, 2040:6611 -10 Beholder Wander DVB-T/TV/FM USB2.0 6000:dec0 -11 Beholder Voyager TV/FM USB2.0 6000:dec1 -12 Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick 0ccd:0086, 0ccd:00A5 -13 Twinhan TU501(704D1) 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264 -14 Beholder Wander Lite DVB-T/TV/FM USB2.0 6000:dec2 -15 Beholder Voyager Lite TV/FM USB2.0 6000:dec3 -16 Terratec Grabster AV 150/250 MX 0ccd:0079 -=========== ================================================= ========================================== +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - USB IDs + + * - 0 + - Unknown tm6000 video grabber + - + + * - 1 + - Generic tm5600 board + - 6000:0001 + + * - 2 + - Generic tm6000 board + - + + * - 3 + - Generic tm6010 board + - 6000:0002 + + * - 4 + - 10Moons UT 821 + - + + * - 5 + - 10Moons UT 330 + - + + * - 6 + - ADSTECH Dual TV USB + - 06e1:f332 + + * - 7 + - Freecom Hybrid Stick / Moka DVB-T Receiver Dual + - 14aa:0620 + + * - 8 + - ADSTECH Mini Dual TV USB + - 06e1:b339 + + * - 9 + - Hauppauge WinTV HVR-900H / WinTV USB2-Stick + - 2040:6600, 2040:6601, 2040:6610, 2040:6611 + + * - 10 + - Beholder Wander DVB-T/TV/FM USB2.0 + - 6000:dec0 + + * - 11 + - Beholder Voyager TV/FM USB2.0 + - 6000:dec1 + + * - 12 + - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick + - 0ccd:0086, 0ccd:00A5 + + * - 13 + - Twinhan TU501(704D1) + - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264 + + * - 14 + - Beholder Wander Lite DVB-T/TV/FM USB2.0 + - 6000:dec2 + + * - 15 + - Beholder Voyager Lite TV/FM USB2.0 + - 6000:dec3 + + * - 16 + - Terratec Grabster AV 150/250 MX + - 0ccd:0079 diff --git a/Documentation/media/v4l-drivers/usbvision-cardlist.rst b/Documentation/media/v4l-drivers/usbvision-cardlist.rst index 44d53dff0984..5a8ffbfc204e 100644 --- a/Documentation/media/v4l-drivers/usbvision-cardlist.rst +++ b/Documentation/media/v4l-drivers/usbvision-cardlist.rst @@ -1,74 +1,281 @@ USBvision cards list ==================== -=========== ======================================================== ========= -Card number Card name USB IDs -=========== ======================================================== ========= -0 Xanboo 0a6f:0400 -1 Belkin USB VideoBus II Adapter 050d:0106 -2 Belkin Components USB VideoBus 050d:0207 -3 Belkin USB VideoBus II 050d:0208 -4 echoFX InterView Lite 0571:0002 -5 USBGear USBG-V1 resp. HAMA USB 0573:0003 -6 D-Link V100 0573:0400 -7 X10 USB Camera 0573:2000 -8 Hauppauge WinTV USB Live (PAL B/G) 0573:2d00 -9 Hauppauge WinTV USB Live Pro (NTSC M/N) 0573:2d01 -10 Zoran Co. PMD (Nogatech) AV-grabber Manhattan 0573:2101 -11 Nogatech USB-TV (NTSC) FM 0573:4100 -12 PNY USB-TV (NTSC) FM 0573:4110 -13 PixelView PlayTv-USB PRO (PAL) FM 0573:4450 -14 ZTV ZT-721 2.4GHz USB A/V Receiver 0573:4550 -15 Hauppauge WinTV USB (NTSC M/N) 0573:4d00 -16 Hauppauge WinTV USB (PAL B/G) 0573:4d01 -17 Hauppauge WinTV USB (PAL I) 0573:4d02 -18 Hauppauge WinTV USB (PAL/SECAM L) 0573:4d03 -19 Hauppauge WinTV USB (PAL D/K) 0573:4d04 -20 Hauppauge WinTV USB (NTSC FM) 0573:4d10 -21 Hauppauge WinTV USB (PAL B/G FM) 0573:4d11 -22 Hauppauge WinTV USB (PAL I FM) 0573:4d12 -23 Hauppauge WinTV USB (PAL D/K FM) 0573:4d14 -24 Hauppauge WinTV USB Pro (NTSC M/N) 0573:4d2a -25 Hauppauge WinTV USB Pro (NTSC M/N) V2 0573:4d2b -26 Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L) 0573:4d2c -27 Hauppauge WinTV USB Pro (NTSC M/N) V3 0573:4d20 -28 Hauppauge WinTV USB Pro (PAL B/G) 0573:4d21 -29 Hauppauge WinTV USB Pro (PAL I) 0573:4d22 -30 Hauppauge WinTV USB Pro (PAL/SECAM L) 0573:4d23 -31 Hauppauge WinTV USB Pro (PAL D/K) 0573:4d24 -32 Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) 0573:4d25 -33 Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2 0573:4d26 -34 Hauppauge WinTV USB Pro (PAL B/G) V2 0573:4d27 -35 Hauppauge WinTV USB Pro (PAL B/G,D/K) 0573:4d28 -36 Hauppauge WinTV USB Pro (PAL I,D/K) 0573:4d29 -37 Hauppauge WinTV USB Pro (NTSC M/N FM) 0573:4d30 -38 Hauppauge WinTV USB Pro (PAL B/G FM) 0573:4d31 -39 Hauppauge WinTV USB Pro (PAL I FM) 0573:4d32 -40 Hauppauge WinTV USB Pro (PAL D/K FM) 0573:4d34 -41 Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM) 0573:4d35 -42 Hauppauge WinTV USB Pro (Temic PAL B/G FM) 0573:4d36 -43 Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM) 0573:4d37 -44 Hauppauge WinTV USB Pro (NTSC M/N FM) V2 0573:4d38 -45 Camtel Technology USB TV Genie Pro FM Model TVB330 0768:0006 -46 Digital Video Creator I 07d0:0001 -47 Global Village GV-007 (NTSC) 07d0:0002 -48 Dazzle Fusion Model DVC-50 Rev 1 (NTSC) 07d0:0003 -49 Dazzle Fusion Model DVC-80 Rev 1 (PAL) 07d0:0004 -50 Dazzle Fusion Model DVC-90 Rev 1 (SECAM) 07d0:0005 -51 Eskape Labs MyTV2Go 07f8:9104 -52 Pinnacle Studio PCTV USB (PAL) 2304:010d -53 Pinnacle Studio PCTV USB (SECAM) 2304:0109 -54 Pinnacle Studio PCTV USB (PAL) FM 2304:0110 -55 Miro PCTV USB 2304:0111 -56 Pinnacle Studio PCTV USB (NTSC) FM 2304:0112 -57 Pinnacle Studio PCTV USB (PAL) FM V2 2304:0210 -58 Pinnacle Studio PCTV USB (NTSC) FM V2 2304:0212 -59 Pinnacle Studio PCTV USB (PAL) FM V3 2304:0214 -60 Pinnacle Studio Linx Video input cable (NTSC) 2304:0300 -61 Pinnacle Studio Linx Video input cable (PAL) 2304:0301 -62 Pinnacle PCTV Bungee USB (PAL) FM 2304:0419 -63 Hauppauge WinTv-USB 2400:4200 -64 Pinnacle Studio PCTV USB (NTSC) FM V3 2304:0113 -65 Nogatech USB MicroCam NTSC (NV3000N) 0573:3000 -66 Nogatech USB MicroCam PAL (NV3001P) 0573:3001 -=========== ======================================================== ========= +.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| + +.. flat-table:: + :header-rows: 1 + :widths: 2 19 18 + :stub-columns: 0 + + * - Card number + - Card name + - USB IDs + + * - 0 + - Xanboo + - 0a6f:0400 + + * - 1 + - Belkin USB VideoBus II Adapter + - 050d:0106 + + * - 2 + - Belkin Components USB VideoBus + - 050d:0207 + + * - 3 + - Belkin USB VideoBus II + - 050d:0208 + + * - 4 + - echoFX InterView Lite + - 0571:0002 + + * - 5 + - USBGear USBG-V1 resp. HAMA USB + - 0573:0003 + + * - 6 + - D-Link V100 + - 0573:0400 + + * - 7 + - X10 USB Camera + - 0573:2000 + + * - 8 + - Hauppauge WinTV USB Live (PAL B/G) + - 0573:2d00 + + * - 9 + - Hauppauge WinTV USB Live Pro (NTSC M/N) + - 0573:2d01 + + * - 10 + - Zoran Co. PMD (Nogatech) AV-grabber Manhattan + - 0573:2101 + + * - 11 + - Nogatech USB-TV (NTSC) FM + - 0573:4100 + + * - 12 + - PNY USB-TV (NTSC) FM + - 0573:4110 + + * - 13 + - PixelView PlayTv-USB PRO (PAL) FM + - 0573:4450 + + * - 14 + - ZTV ZT-721 2.4GHz USB A/V Receiver + - 0573:4550 + + * - 15 + - Hauppauge WinTV USB (NTSC M/N) + - 0573:4d00 + + * - 16 + - Hauppauge WinTV USB (PAL B/G) + - 0573:4d01 + + * - 17 + - Hauppauge WinTV USB (PAL I) + - 0573:4d02 + + * - 18 + - Hauppauge WinTV USB (PAL/SECAM L) + - 0573:4d03 + + * - 19 + - Hauppauge WinTV USB (PAL D/K) + - 0573:4d04 + + * - 20 + - Hauppauge WinTV USB (NTSC FM) + - 0573:4d10 + + * - 21 + - Hauppauge WinTV USB (PAL B/G FM) + - 0573:4d11 + + * - 22 + - Hauppauge WinTV USB (PAL I FM) + - 0573:4d12 + + * - 23 + - Hauppauge WinTV USB (PAL D/K FM) + - 0573:4d14 + + * - 24 + - Hauppauge WinTV USB Pro (NTSC M/N) + - 0573:4d2a + + * - 25 + - Hauppauge WinTV USB Pro (NTSC M/N) V2 + - 0573:4d2b + + * - 26 + - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L) + - 0573:4d2c + + * - 27 + - Hauppauge WinTV USB Pro (NTSC M/N) V3 + - 0573:4d20 + + * - 28 + - Hauppauge WinTV USB Pro (PAL B/G) + - 0573:4d21 + + * - 29 + - Hauppauge WinTV USB Pro (PAL I) + - 0573:4d22 + + * - 30 + - Hauppauge WinTV USB Pro (PAL/SECAM L) + - 0573:4d23 + + * - 31 + - Hauppauge WinTV USB Pro (PAL D/K) + - 0573:4d24 + + * - 32 + - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) + - 0573:4d25 + + * - 33 + - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2 + - 0573:4d26 + + * - 34 + - Hauppauge WinTV USB Pro (PAL B/G) V2 + - 0573:4d27 + + * - 35 + - Hauppauge WinTV USB Pro (PAL B/G,D/K) + - 0573:4d28 + + * - 36 + - Hauppauge WinTV USB Pro (PAL I,D/K) + - 0573:4d29 + + * - 37 + - Hauppauge WinTV USB Pro (NTSC M/N FM) + - 0573:4d30 + + * - 38 + - Hauppauge WinTV USB Pro (PAL B/G FM) + - 0573:4d31 + + * - 39 + - Hauppauge WinTV USB Pro (PAL I FM) + - 0573:4d32 + + * - 40 + - Hauppauge WinTV USB Pro (PAL D/K FM) + - 0573:4d34 + + * - 41 + - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM) + - 0573:4d35 + + * - 42 + - Hauppauge WinTV USB Pro (Temic PAL B/G FM) + - 0573:4d36 + + * - 43 + - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM) + - 0573:4d37 + + * - 44 + - Hauppauge WinTV USB Pro (NTSC M/N FM) V2 + - 0573:4d38 + + * - 45 + - Camtel Technology USB TV Genie Pro FM Model TVB330 + - 0768:0006 + + * - 46 + - Digital Video Creator I + - 07d0:0001 + + * - 47 + - Global Village GV-007 (NTSC) + - 07d0:0002 + + * - 48 + - Dazzle Fusion Model DVC-50 Rev 1 (NTSC) + - 07d0:0003 + + * - 49 + - Dazzle Fusion Model DVC-80 Rev 1 (PAL) + - 07d0:0004 + + * - 50 + - Dazzle Fusion Model DVC-90 Rev 1 (SECAM) + - 07d0:0005 + + * - 51 + - Eskape Labs MyTV2Go + - 07f8:9104 + + * - 52 + - Pinnacle Studio PCTV USB (PAL) + - 2304:010d + + * - 53 + - Pinnacle Studio PCTV USB (SECAM) + - 2304:0109 + + * - 54 + - Pinnacle Studio PCTV USB (PAL) FM + - 2304:0110 + + * - 55 + - Miro PCTV USB + - 2304:0111 + + * - 56 + - Pinnacle Studio PCTV USB (NTSC) FM + - 2304:0112 + + * - 57 + - Pinnacle Studio PCTV USB (PAL) FM V2 + - 2304:0210 + + * - 58 + - Pinnacle Studio PCTV USB (NTSC) FM V2 + - 2304:0212 + + * - 59 + - Pinnacle Studio PCTV USB (PAL) FM V3 + - 2304:0214 + + * - 60 + - Pinnacle Studio Linx Video input cable (NTSC) + - 2304:0300 + + * - 61 + - Pinnacle Studio Linx Video input cable (PAL) + - 2304:0301 + + * - 62 + - Pinnacle PCTV Bungee USB (PAL) FM + - 2304:0419 + + * - 63 + - Hauppauge WinTv-USB + - 2400:4200 + + * - 64 + - Pinnacle Studio PCTV USB (NTSC) FM V3 + - 2304:0113 + + * - 65 + - Nogatech USB MicroCam NTSC (NV3000N) + - 0573:3000 + + * - 66 + - Nogatech USB MicroCam PAL (NV3001P) + - 0573:3001 diff --git a/Documentation/media/v4l-drivers/vivid.rst b/Documentation/media/v4l-drivers/vivid.rst index 3e44b2217f2d..089595ce11c5 100644 --- a/Documentation/media/v4l-drivers/vivid.rst +++ b/Documentation/media/v4l-drivers/vivid.rst @@ -829,6 +829,7 @@ The following two controls are only valid for video and vbi capture. The following two controls are only valid for video capture. - DV Timings Signal Mode: + selects the behavior of VIDIOC_QUERY_DV_TIMINGS: what should it return? diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index c4ddfcd5ee32..b759a60624fd 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -498,11 +498,11 @@ And a couple of implicit varieties: This means that ACQUIRE acts as a minimal "acquire" operation and RELEASE acts as a minimal "release" operation. -A subset of the atomic operations described in core-api/atomic_ops.rst have -ACQUIRE and RELEASE variants in addition to fully-ordered and relaxed (no -barrier semantics) definitions. For compound atomics performing both a load -and a store, ACQUIRE semantics apply only to the load and RELEASE semantics -apply only to the store portion of the operation. +A subset of the atomic operations described in atomic_t.txt have ACQUIRE and +RELEASE variants in addition to fully-ordered and relaxed (no barrier +semantics) definitions. For compound atomics performing both a load and a +store, ACQUIRE semantics apply only to the load and RELEASE semantics apply +only to the store portion of the operation. Memory barriers are only required where there's a possibility of interaction between two CPUs or between a CPU and a device. If it can be guaranteed that @@ -594,7 +594,24 @@ between the address load and the data load: This enforces the occurrence of one of the two implications, and prevents the third possibility from arising. -A data-dependency barrier must also order against dependent writes: + +[!] Note that this extremely counterintuitive situation arises most easily on +machines with split caches, so that, for example, one cache bank processes +even-numbered cache lines and the other bank processes odd-numbered cache +lines. The pointer P might be stored in an odd-numbered cache line, and the +variable B might be stored in an even-numbered cache line. Then, if the +even-numbered bank of the reading CPU's cache is extremely busy while the +odd-numbered bank is idle, one can see the new value of the pointer P (&B), +but the old value of the variable B (2). + + +A data-dependency barrier is not required to order dependent writes +because the CPUs that the Linux kernel supports don't do writes +until they are certain (1) that the write will actually happen, (2) +of the location of the write, and (3) of the value to be written. +But please carefully read the "CONTROL DEPENDENCIES" section and the +Documentation/RCU/rcu_dereference.txt file: The compiler can and does +break dependencies in a great many highly creative ways. CPU 1 CPU 2 =============== =============== @@ -603,29 +620,19 @@ A data-dependency barrier must also order against dependent writes: <write barrier> WRITE_ONCE(P, &B); Q = READ_ONCE(P); - <data dependency barrier> - *Q = 5; + WRITE_ONCE(*Q, 5); -The data-dependency barrier must order the read into Q with the store -into *Q. This prohibits this outcome: +Therefore, no data-dependency barrier is required to order the read into +Q with the store into *Q. In other words, this outcome is prohibited, +even without a data-dependency barrier: (Q == &B) && (B == 4) Please note that this pattern should be rare. After all, the whole point of dependency ordering is to -prevent- writes to the data structure, along with the expensive cache misses associated with those writes. This pattern -can be used to record rare error conditions and the like, and the ordering -prevents such records from being lost. - - -[!] Note that this extremely counterintuitive situation arises most easily on -machines with split caches, so that, for example, one cache bank processes -even-numbered cache lines and the other bank processes odd-numbered cache -lines. The pointer P might be stored in an odd-numbered cache line, and the -variable B might be stored in an even-numbered cache line. Then, if the -even-numbered bank of the reading CPU's cache is extremely busy while the -odd-numbered bank is idle, one can see the new value of the pointer P (&B), -but the old value of the variable B (2). +can be used to record rare error conditions and the like, and the CPUs' +naturally occurring ordering prevents such records from being lost. The data dependency barrier is very important to the RCU system, @@ -1876,8 +1883,7 @@ There are some more advanced barrier functions: This makes sure that the death mark on the object is perceived to be set *before* the reference counter is decremented. - See Documentation/core-api/atomic_ops.rst for more information. See the - "Atomic operations" subsection for information on where to use these. + See Documentation/atomic_{t,bitops}.txt for more information. (*) lockless_dereference(); @@ -1982,10 +1988,7 @@ for each construct. These operations all imply certain barriers: ACQUIRE operation has completed. Memory operations issued before the ACQUIRE may be completed after - the ACQUIRE operation has completed. An smp_mb__before_spinlock(), - combined with a following ACQUIRE, orders prior stores against - subsequent loads and stores. Note that this is weaker than smp_mb()! - The smp_mb__before_spinlock() primitive is free on many architectures. + the ACQUIRE operation has completed. (2) RELEASE operation implication: @@ -2503,88 +2506,7 @@ operations are noted specially as some of them imply full memory barriers and some don't, but they're very heavily relied on as a group throughout the kernel. -Any atomic operation that modifies some state in memory and returns information -about the state (old or new) implies an SMP-conditional general memory barrier -(smp_mb()) on each side of the actual operation (with the exception of -explicit lock operations, described later). These include: - - xchg(); - atomic_xchg(); atomic_long_xchg(); - atomic_inc_return(); atomic_long_inc_return(); - atomic_dec_return(); atomic_long_dec_return(); - atomic_add_return(); atomic_long_add_return(); - atomic_sub_return(); atomic_long_sub_return(); - atomic_inc_and_test(); atomic_long_inc_and_test(); - atomic_dec_and_test(); atomic_long_dec_and_test(); - atomic_sub_and_test(); atomic_long_sub_and_test(); - atomic_add_negative(); atomic_long_add_negative(); - test_and_set_bit(); - test_and_clear_bit(); - test_and_change_bit(); - - /* when succeeds */ - cmpxchg(); - atomic_cmpxchg(); atomic_long_cmpxchg(); - atomic_add_unless(); atomic_long_add_unless(); - -These are used for such things as implementing ACQUIRE-class and RELEASE-class -operations and adjusting reference counters towards object destruction, and as -such the implicit memory barrier effects are necessary. - - -The following operations are potential problems as they do _not_ imply memory -barriers, but might be used for implementing such things as RELEASE-class -operations: - - atomic_set(); - set_bit(); - clear_bit(); - change_bit(); - -With these the appropriate explicit memory barrier should be used if necessary -(smp_mb__before_atomic() for instance). - - -The following also do _not_ imply memory barriers, and so may require explicit -memory barriers under some circumstances (smp_mb__before_atomic() for -instance): - - atomic_add(); - atomic_sub(); - atomic_inc(); - atomic_dec(); - -If they're used for statistics generation, then they probably don't need memory -barriers, unless there's a coupling between statistical data. - -If they're used for reference counting on an object to control its lifetime, -they probably don't need memory barriers because either the reference count -will be adjusted inside a locked section, or the caller will already hold -sufficient references to make the lock, and thus a memory barrier unnecessary. - -If they're used for constructing a lock of some description, then they probably -do need memory barriers as a lock primitive generally has to do things in a -specific order. - -Basically, each usage case has to be carefully considered as to whether memory -barriers are needed or not. - -The following operations are special locking primitives: - - test_and_set_bit_lock(); - clear_bit_unlock(); - __clear_bit_unlock(); - -These implement ACQUIRE-class and RELEASE-class operations. These should be -used in preference to other operations when implementing locking primitives, -because their implementations can be optimised on many architectures. - -[!] Note that special memory barrier primitives are available for these -situations because on some CPUs the atomic instructions used imply full memory -barriers, and so barrier instructions are superfluous in conjunction with them, -and in such cases the special barrier primitives will be no-ops. - -See Documentation/core-api/atomic_ops.rst for more information. +See Documentation/atomic_t.txt for more information. ACCESSING DEVICES diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index c6beb5f1637f..7a79b3587dd3 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -30,8 +30,6 @@ atm.txt - info on where to get ATM programs and support for Linux. ax25.txt - info on using AX.25 and NET/ROM code for Linux -batman-adv.txt - - B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames. baycom.txt - info on the driver for Baycom style amateur radio modems bonding.txt diff --git a/Documentation/networking/batman-adv.rst b/Documentation/networking/batman-adv.rst new file mode 100644 index 000000000000..a342b2cc3dc6 --- /dev/null +++ b/Documentation/networking/batman-adv.rst @@ -0,0 +1,220 @@ +========== +batman-adv +========== + +Batman advanced is a new approach to wireless networking which does no longer +operate on the IP basis. Unlike the batman daemon, which exchanges information +using UDP packets and sets routing tables, batman-advanced operates on ISO/OSI +Layer 2 only and uses and routes (or better: bridges) Ethernet Frames. It +emulates a virtual network switch of all nodes participating. Therefore all +nodes appear to be link local, thus all higher operating protocols won't be +affected by any changes within the network. You can run almost any protocol +above batman advanced, prominent examples are: IPv4, IPv6, DHCP, IPX. + +Batman advanced was implemented as a Linux kernel driver to reduce the overhead +to a minimum. It does not depend on any (other) network driver, and can be used +on wifi as well as ethernet lan, vpn, etc ... (anything with ethernet-style +layer 2). + + +Configuration +============= + +Load the batman-adv module into your kernel:: + + $ insmod batman-adv.ko + +The module is now waiting for activation. You must add some interfaces on which +batman can operate. After loading the module batman advanced will scan your +systems interfaces to search for compatible interfaces. Once found, it will +create subfolders in the ``/sys`` directories of each supported interface, +e.g.:: + + $ ls /sys/class/net/eth0/batman_adv/ + elp_interval iface_status mesh_iface throughput_override + +If an interface does not have the ``batman_adv`` subfolder, it probably is not +supported. Not supported interfaces are: loopback, non-ethernet and batman's +own interfaces. + +Note: After the module was loaded it will continuously watch for new +interfaces to verify the compatibility. There is no need to reload the module +if you plug your USB wifi adapter into your machine after batman advanced was +initially loaded. + +The batman-adv soft-interface can be created using the iproute2 tool ``ip``:: + + $ ip link add name bat0 type batadv + +To activate a given interface simply attach it to the ``bat0`` interface:: + + $ ip link set dev eth0 master bat0 + +Repeat this step for all interfaces you wish to add. Now batman starts +using/broadcasting on this/these interface(s). + +By reading the "iface_status" file you can check its status:: + + $ cat /sys/class/net/eth0/batman_adv/iface_status + active + +To deactivate an interface you have to detach it from the "bat0" interface:: + + $ ip link set dev eth0 nomaster + + +All mesh wide settings can be found in batman's own interface folder:: + + $ ls /sys/class/net/bat0/mesh/ + aggregated_ogms fragmentation isolation_mark routing_algo + ap_isolation gw_bandwidth log_level vlan0 + bonding gw_mode multicast_mode + bridge_loop_avoidance gw_sel_class network_coding + distributed_arp_table hop_penalty orig_interval + +There is a special folder for debugging information:: + + $ ls /sys/kernel/debug/batman_adv/bat0/ + bla_backbone_table log neighbors transtable_local + bla_claim_table mcast_flags originators + dat_cache nc socket + gateways nc_nodes transtable_global + +Some of the files contain all sort of status information regarding the mesh +network. For example, you can view the table of originators (mesh +participants) with:: + + $ cat /sys/kernel/debug/batman_adv/bat0/originators + +Other files allow to change batman's behaviour to better fit your requirements. +For instance, you can check the current originator interval (value in +milliseconds which determines how often batman sends its broadcast packets):: + + $ cat /sys/class/net/bat0/mesh/orig_interval + 1000 + +and also change its value:: + + $ echo 3000 > /sys/class/net/bat0/mesh/orig_interval + +In very mobile scenarios, you might want to adjust the originator interval to a +lower value. This will make the mesh more responsive to topology changes, but +will also increase the overhead. + + +Usage +===== + +To make use of your newly created mesh, batman advanced provides a new +interface "bat0" which you should use from this point on. All interfaces added +to batman advanced are not relevant any longer because batman handles them for +you. Basically, one "hands over" the data by using the batman interface and +batman will make sure it reaches its destination. + +The "bat0" interface can be used like any other regular interface. It needs an +IP address which can be either statically configured or dynamically (by using +DHCP or similar services):: + + NodeA: ip link set up dev bat0 + NodeA: ip addr add 192.168.0.1/24 dev bat0 + + NodeB: ip link set up dev bat0 + NodeB: ip addr add 192.168.0.2/24 dev bat0 + NodeB: ping 192.168.0.1 + +Note: In order to avoid problems remove all IP addresses previously assigned to +interfaces now used by batman advanced, e.g.:: + + $ ip addr flush dev eth0 + + +Logging/Debugging +================= + +All error messages, warnings and information messages are sent to the kernel +log. Depending on your operating system distribution this can be read in one of +a number of ways. Try using the commands: ``dmesg``, ``logread``, or looking in +the files ``/var/log/kern.log`` or ``/var/log/syslog``. All batman-adv messages +are prefixed with "batman-adv:" So to see just these messages try:: + + $ dmesg | grep batman-adv + +When investigating problems with your mesh network, it is sometimes necessary to +see more detail debug messages. This must be enabled when compiling the +batman-adv module. When building batman-adv as part of kernel, use "make +menuconfig" and enable the option ``B.A.T.M.A.N. debugging`` +(``CONFIG_BATMAN_ADV_DEBUG=y``). + +Those additional debug messages can be accessed using a special file in +debugfs:: + + $ cat /sys/kernel/debug/batman_adv/bat0/log + +The additional debug output is by default disabled. It can be enabled during +run time. Following log_levels are defined: + +.. flat-table:: + + * - 0 + - All debug output disabled + * - 1 + - Enable messages related to routing / flooding / broadcasting + * - 2 + - Enable messages related to route added / changed / deleted + * - 4 + - Enable messages related to translation table operations + * - 8 + - Enable messages related to bridge loop avoidance + * - 16 + - Enable messages related to DAT, ARP snooping and parsing + * - 32 + - Enable messages related to network coding + * - 64 + - Enable messages related to multicast + * - 128 + - Enable messages related to throughput meter + * - 255 + - Enable all messages + +The debug output can be changed at runtime using the file +``/sys/class/net/bat0/mesh/log_level``. e.g.:: + + $ echo 6 > /sys/class/net/bat0/mesh/log_level + +will enable debug messages for when routes change. + +Counters for different types of packets entering and leaving the batman-adv +module are available through ethtool:: + + $ ethtool --statistics bat0 + + +batctl +====== + +As batman advanced operates on layer 2, all hosts participating in the virtual +switch are completely transparent for all protocols above layer 2. Therefore +the common diagnosis tools do not work as expected. To overcome these problems, +batctl was created. At the moment the batctl contains ping, traceroute, tcpdump +and interfaces to the kernel module settings. + +For more information, please see the manpage (``man batctl``). + +batctl is available on https://www.open-mesh.org/ + + +Contact +======= + +Please send us comments, experiences, questions, anything :) + +IRC: + #batman on irc.freenode.org +Mailing-list: + b.a.t.m.a.n@open-mesh.org (optional subscription at + https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n) + +You can also contact the Authors: + +* Marek Lindner <mareklindner@neomailbox.ch> +* Simon Wunderlich <sw@simonwunderlich.de> diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt deleted file mode 100644 index ccf94677b240..000000000000 --- a/Documentation/networking/batman-adv.txt +++ /dev/null @@ -1,215 +0,0 @@ -BATMAN-ADV ----------- - -Batman advanced is a new approach to wireless networking which -does no longer operate on the IP basis. Unlike the batman daemon, -which exchanges information using UDP packets and sets routing -tables, batman-advanced operates on ISO/OSI Layer 2 only and uses -and routes (or better: bridges) Ethernet Frames. It emulates a -virtual network switch of all nodes participating. Therefore all -nodes appear to be link local, thus all higher operating proto- -cols won't be affected by any changes within the network. You can -run almost any protocol above batman advanced, prominent examples -are: IPv4, IPv6, DHCP, IPX. - -Batman advanced was implemented as a Linux kernel driver to re- -duce the overhead to a minimum. It does not depend on any (other) -network driver, and can be used on wifi as well as ethernet lan, -vpn, etc ... (anything with ethernet-style layer 2). - - -CONFIGURATION -------------- - -Load the batman-adv module into your kernel: - -# insmod batman-adv.ko - -The module is now waiting for activation. You must add some in- -terfaces on which batman can operate. After loading the module -batman advanced will scan your systems interfaces to search for -compatible interfaces. Once found, it will create subfolders in -the /sys directories of each supported interface, e.g. - -# ls /sys/class/net/eth0/batman_adv/ -# elp_interval iface_status mesh_iface throughput_override - -If an interface does not have the "batman_adv" subfolder it prob- -ably is not supported. Not supported interfaces are: loopback, -non-ethernet and batman's own interfaces. - -Note: After the module was loaded it will continuously watch for -new interfaces to verify the compatibility. There is no need to -reload the module if you plug your USB wifi adapter into your ma- -chine after batman advanced was initially loaded. - -The batman-adv soft-interface can be created using the iproute2 -tool "ip" - -# ip link add name bat0 type batadv - -To activate a given interface simply attach it to the "bat0" -interface - -# ip link set dev eth0 master bat0 - -Repeat this step for all interfaces you wish to add. Now batman -starts using/broadcasting on this/these interface(s). - -By reading the "iface_status" file you can check its status: - -# cat /sys/class/net/eth0/batman_adv/iface_status -# active - -To deactivate an interface you have to detach it from the -"bat0" interface: - -# ip link set dev eth0 nomaster - - -All mesh wide settings can be found in batman's own interface -folder: - -# ls /sys/class/net/bat0/mesh/ -# aggregated_ogms fragmentation isolation_mark routing_algo -# ap_isolation gw_bandwidth log_level vlan0 -# bonding gw_mode multicast_mode -# bridge_loop_avoidance gw_sel_class network_coding -# distributed_arp_table hop_penalty orig_interval - -There is a special folder for debugging information: - -# ls /sys/kernel/debug/batman_adv/bat0/ -# bla_backbone_table log neighbors transtable_local -# bla_claim_table mcast_flags originators -# dat_cache nc socket -# gateways nc_nodes transtable_global - -Some of the files contain all sort of status information regard- -ing the mesh network. For example, you can view the table of -originators (mesh participants) with: - -# cat /sys/kernel/debug/batman_adv/bat0/originators - -Other files allow to change batman's behaviour to better fit your -requirements. For instance, you can check the current originator -interval (value in milliseconds which determines how often batman -sends its broadcast packets): - -# cat /sys/class/net/bat0/mesh/orig_interval -# 1000 - -and also change its value: - -# echo 3000 > /sys/class/net/bat0/mesh/orig_interval - -In very mobile scenarios, you might want to adjust the originator -interval to a lower value. This will make the mesh more respon- -sive to topology changes, but will also increase the overhead. - - -USAGE ------ - -To make use of your newly created mesh, batman advanced provides -a new interface "bat0" which you should use from this point on. -All interfaces added to batman advanced are not relevant any -longer because batman handles them for you. Basically, one "hands -over" the data by using the batman interface and batman will make -sure it reaches its destination. - -The "bat0" interface can be used like any other regular inter- -face. It needs an IP address which can be either statically con- -figured or dynamically (by using DHCP or similar services): - -# NodeA: ip link set up dev bat0 -# NodeA: ip addr add 192.168.0.1/24 dev bat0 - -# NodeB: ip link set up dev bat0 -# NodeB: ip addr add 192.168.0.2/24 dev bat0 -# NodeB: ping 192.168.0.1 - -Note: In order to avoid problems remove all IP addresses previ- -ously assigned to interfaces now used by batman advanced, e.g. - -# ip addr flush dev eth0 - - -LOGGING/DEBUGGING ------------------ - -All error messages, warnings and information messages are sent to -the kernel log. Depending on your operating system distribution -this can be read in one of a number of ways. Try using the com- -mands: dmesg, logread, or looking in the files /var/log/kern.log -or /var/log/syslog. All batman-adv messages are prefixed with -"batman-adv:" So to see just these messages try - -# dmesg | grep batman-adv - -When investigating problems with your mesh network it is some- -times necessary to see more detail debug messages. This must be -enabled when compiling the batman-adv module. When building bat- -man-adv as part of kernel, use "make menuconfig" and enable the -option "B.A.T.M.A.N. debugging". - -Those additional debug messages can be accessed using a special -file in debugfs - -# cat /sys/kernel/debug/batman_adv/bat0/log - -The additional debug output is by default disabled. It can be en- -abled during run time. Following log_levels are defined: - - 0 - All debug output disabled - 1 - Enable messages related to routing / flooding / broadcasting - 2 - Enable messages related to route added / changed / deleted - 4 - Enable messages related to translation table operations - 8 - Enable messages related to bridge loop avoidance - 16 - Enable messages related to DAT, ARP snooping and parsing - 32 - Enable messages related to network coding - 64 - Enable messages related to multicast -128 - Enable messages related to throughput meter -255 - Enable all messages - -The debug output can be changed at runtime using the file -/sys/class/net/bat0/mesh/log_level. e.g. - -# echo 6 > /sys/class/net/bat0/mesh/log_level - -will enable debug messages for when routes change. - -Counters for different types of packets entering and leaving the -batman-adv module are available through ethtool: - -# ethtool --statistics bat0 - - -BATCTL ------- - -As batman advanced operates on layer 2 all hosts participating in -the virtual switch are completely transparent for all protocols -above layer 2. Therefore the common diagnosis tools do not work -as expected. To overcome these problems batctl was created. At -the moment the batctl contains ping, traceroute, tcpdump and -interfaces to the kernel module settings. - -For more information, please see the manpage (man batctl). - -batctl is available on https://www.open-mesh.org/ - - -CONTACT -------- - -Please send us comments, experiences, questions, anything :) - -IRC: #batman on irc.freenode.org -Mailing-list: b.a.t.m.a.n@open-mesh.org (optional subscription - at https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n) - -You can also contact the Authors: - -Marek Lindner <mareklindner@neomailbox.ch> -Simon Wunderlich <sw@simonwunderlich.de> diff --git a/Documentation/networking/dpaa.txt b/Documentation/networking/dpaa.txt index 76e016d4d344..f88194f71c54 100644 --- a/Documentation/networking/dpaa.txt +++ b/Documentation/networking/dpaa.txt @@ -13,6 +13,7 @@ Contents - Configuring DPAA Ethernet in your kernel - DPAA Ethernet Frame Processing - DPAA Ethernet Features + - DPAA IRQ Affinity and Receive Side Scaling - Debugging DPAA Ethernet Overview @@ -147,7 +148,10 @@ gradually. The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx checksum offload feature is enabled by default and cannot be controlled through -ethtool. +ethtool. Also, rx-flow-hash and rx-hashing was added. The addition of RSS +provides a big performance boost for the forwarding scenarios, allowing +different traffic flows received by one interface to be processed by different +CPUs in parallel. The driver has support for multiple prioritized Tx traffic classes. Priorities range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with @@ -166,6 +170,68 @@ classes as follows: tc qdisc add dev <int> root handle 1: \ mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1 +DPAA IRQ Affinity and Receive Side Scaling +========================================== + +Traffic coming on the DPAA Rx queues or on the DPAA Tx confirmation +queues is seen by the CPU as ingress traffic on a certain portal. +The DPAA QMan portal interrupts are affined each to a certain CPU. +The same portal interrupt services all the QMan portal consumers. + +By default the DPAA Ethernet driver enables RSS, making use of the +DPAA FMan Parser and Keygen blocks to distribute traffic on 128 +hardware frame queues using a hash on IP v4/v6 source and destination +and L4 source and destination ports, in present in the received frame. +When RSS is disabled, all traffic received by a certain interface is +received on the default Rx frame queue. The default DPAA Rx frame +queues are configured to put the received traffic into a pool channel +that allows any available CPU portal to dequeue the ingress traffic. +The default frame queues have the HOLDACTIVE option set, ensuring that +traffic bursts from a certain queue are serviced by the same CPU. +This ensures a very low rate of frame reordering. A drawback of this +is that only one CPU at a time can service the traffic received by a +certain interface when RSS is not enabled. + +To implement RSS, the DPAA Ethernet driver allocates an extra set of +128 Rx frame queues that are configured to dedicated channels, in a +round-robin manner. The mapping of the frame queues to CPUs is now +hardcoded, there is no indirection table to move traffic for a certain +FQ (hash result) to another CPU. The ingress traffic arriving on one +of these frame queues will arrive at the same portal and will always +be processed by the same CPU. This ensures intra-flow order preservation +and workload distribution for multiple traffic flows. + +RSS can be turned off for a certain interface using ethtool, i.e. + + # ethtool -N fm1-mac9 rx-flow-hash tcp4 "" + +To turn it back on, one needs to set rx-flow-hash for tcp4/6 or udp4/6: + + # ethtool -N fm1-mac9 rx-flow-hash udp4 sfdn + +There is no independent control for individual protocols, any command +run for one of tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 is +going to control the rx-flow-hashing for all protocols on that interface. + +Besides using the FMan Keygen computed hash for spreading traffic on the +128 Rx FQs, the DPAA Ethernet driver also sets the skb hash value when +the NETIF_F_RXHASH feature is on (active by default). This can be turned +on or off through ethtool, i.e.: + + # ethtool -K fm1-mac9 rx-hashing off + # ethtool -k fm1-mac9 | grep hash + receive-hashing: off + # ethtool -K fm1-mac9 rx-hashing on + Actual changes: + receive-hashing: on + # ethtool -k fm1-mac9 | grep hash + receive-hashing: on + +Please note that Rx hashing depends upon the rx-flow-hashing being on +for that interface - turning off rx-flow-hashing will also disable the +rx-hashing (without ethtool reporting it as off as that depends on the +NETIF_F_RXHASH feature flag). + Debugging ========= diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index b69b205501de..e5e33bac2068 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -596,8 +596,8 @@ skb pointer). All constraints and restrictions from bpf_check_classic() apply before a conversion to the new layout is being done behind the scenes! Currently, the classic BPF format is being used for JITing on most 32-bit -architectures, whereas x86-64, aarch64, s390x, powerpc64, sparc64 perform JIT -compilation from eBPF instruction set. +architectures, whereas x86-64, aarch64, s390x, powerpc64, sparc64, arm32 perform +JIT compilation from eBPF instruction set. Some core changes of the new internal format: @@ -793,7 +793,7 @@ Some core changes of the new internal format: bpf_exit After the call the registers R1-R5 contain junk values and cannot be read. - In the future an eBPF verifier can be used to validate internal BPF programs. + An in-kernel eBPF verifier is used to validate internal BPF programs. Also in the new design, eBPF is limited to 4096 insns, which means that any program will terminate quickly and will only call a fixed number of kernel @@ -906,6 +906,10 @@ If BPF_CLASS(code) == BPF_JMP, BPF_OP(code) is one of: BPF_JSGE 0x70 /* eBPF only: signed '>=' */ BPF_CALL 0x80 /* eBPF only: function call */ BPF_EXIT 0x90 /* eBPF only: function return */ + BPF_JLT 0xa0 /* eBPF only: unsigned '<' */ + BPF_JLE 0xb0 /* eBPF only: unsigned '<=' */ + BPF_JSLT 0xc0 /* eBPF only: signed '<' */ + BPF_JSLE 0xd0 /* eBPF only: signed '<=' */ So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF and eBPF. There are only two registers in classic BPF, so it means A += X. @@ -1017,7 +1021,7 @@ At the start of the program the register R1 contains a pointer to context and has type PTR_TO_CTX. If verifier sees an insn that does R2=R1, then R2 has now type PTR_TO_CTX as well and can be used on the right hand side of expression. -If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=UNKNOWN_VALUE, +If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=SCALAR_VALUE, since addition of two valid pointers makes invalid pointer. (In 'secure' mode verifier will reject any type of pointer arithmetic to make sure that kernel addresses don't leak to unprivileged users) @@ -1039,7 +1043,7 @@ is a correct program. If there was R1 instead of R6, it would have been rejected. load/store instructions are allowed only with registers of valid types, which -are PTR_TO_CTX, PTR_TO_MAP, FRAME_PTR. They are bounds and alignment checked. +are PTR_TO_CTX, PTR_TO_MAP, PTR_TO_STACK. They are bounds and alignment checked. For example: bpf_mov R1 = 1 bpf_mov R2 = 2 @@ -1058,7 +1062,7 @@ intends to load a word from address R6 + 8 and store it into R0 If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know that offset 8 of size 4 bytes can be accessed for reading, otherwise the verifier will reject the program. -If R6=FRAME_PTR, then access should be aligned and be within +If R6=PTR_TO_STACK, then access should be aligned and be within stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8, so it will fail verification, since it's out of bounds. @@ -1069,7 +1073,7 @@ For example: bpf_ld R0 = *(u32 *)(R10 - 4) bpf_exit is invalid program. -Though R10 is correct read-only register and has type FRAME_PTR +Though R10 is correct read-only register and has type PTR_TO_STACK and R10 - 4 is within stack bounds, there were no stores into that location. Pointer register spill/fill is tracked as well, since four (R6-R9) @@ -1094,6 +1098,71 @@ all use cases. See details of eBPF verifier in kernel/bpf/verifier.c +Register value tracking +----------------------- +In order to determine the safety of an eBPF program, the verifier must track +the range of possible values in each register and also in each stack slot. +This is done with 'struct bpf_reg_state', defined in include/linux/ +bpf_verifier.h, which unifies tracking of scalar and pointer values. Each +register state has a type, which is either NOT_INIT (the register has not been +written to), SCALAR_VALUE (some value which is not usable as a pointer), or a +pointer type. The types of pointers describe their base, as follows: + PTR_TO_CTX Pointer to bpf_context. + CONST_PTR_TO_MAP Pointer to struct bpf_map. "Const" because arithmetic + on these pointers is forbidden. + PTR_TO_MAP_VALUE Pointer to the value stored in a map element. + PTR_TO_MAP_VALUE_OR_NULL + Either a pointer to a map value, or NULL; map accesses + (see section 'eBPF maps', below) return this type, + which becomes a PTR_TO_MAP_VALUE when checked != NULL. + Arithmetic on these pointers is forbidden. + PTR_TO_STACK Frame pointer. + PTR_TO_PACKET skb->data. + PTR_TO_PACKET_END skb->data + headlen; arithmetic forbidden. +However, a pointer may be offset from this base (as a result of pointer +arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable +offset'. The former is used when an exactly-known value (e.g. an immediate +operand) is added to a pointer, while the latter is used for values which are +not exactly known. The variable offset is also used in SCALAR_VALUEs, to track +the range of possible values in the register. +The verifier's knowledge about the variable offset consists of: +* minimum and maximum values as unsigned +* minimum and maximum values as signed +* knowledge of the values of individual bits, in the form of a 'tnum': a u64 +'mask' and a u64 'value'. 1s in the mask represent bits whose value is unknown; +1s in the value represent bits known to be 1. Bits known to be 0 have 0 in both +mask and value; no bit should ever be 1 in both. For example, if a byte is read +into a register from memory, the register's top 56 bits are known zero, while +the low 8 are unknown - which is represented as the tnum (0x0; 0xff). If we +then OR this with 0x40, we get (0x40; 0xcf), then if we add 1 we get (0x0; +0x1ff), because of potential carries. +Besides arithmetic, the register state can also be updated by conditional +branches. For instance, if a SCALAR_VALUE is compared > 8, in the 'true' branch +it will have a umin_value (unsigned minimum value) of 9, whereas in the 'false' +branch it will have a umax_value of 8. A signed compare (with BPF_JSGT or +BPF_JSGE) would instead update the signed minimum/maximum values. Information +from the signed and unsigned bounds can be combined; for instance if a value is +first tested < 8 and then tested s> 4, the verifier will conclude that the value +is also > 4 and s< 8, since the bounds prevent crossing the sign boundary. +PTR_TO_PACKETs with a variable offset part have an 'id', which is common to all +pointers sharing that same variable offset. This is important for packet range +checks: after adding some variable to a packet pointer, if you then copy it to +another register and (say) add a constant 4, both registers will share the same +'id' but one will have a fixed offset of +4. Then if it is bounds-checked and +found to be less than a PTR_TO_PACKET_END, the other register is now known to +have a safe range of at least 4 bytes. See 'Direct packet access', below, for +more on PTR_TO_PACKET ranges. +The 'id' field is also used on PTR_TO_MAP_VALUE_OR_NULL, common to all copies of +the pointer returned from a map lookup. This means that when one copy is +checked and found to be non-NULL, all copies can become PTR_TO_MAP_VALUEs. +As well as range-checking, the tracked information is also used for enforcing +alignment of pointer accesses. For instance, on most systems the packet pointer +is 2 bytes after a 4-byte alignment. If a program adds 14 bytes to that to jump +over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting +pointer will have a variable offset known to be 4n+2 for some n, so adding the 2 +bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through +that pointer are safe. + Direct packet access -------------------- In cls_bpf and act_bpf programs the verifier allows direct access to the packet @@ -1121,7 +1190,7 @@ it now points to 'skb->data + 14' and accessible range is [R5, R5 + 14 - 14) which is zero bytes. More complex packet access may look like: - R0=imm1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp + R0=inv1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp 6: r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */ 7: r4 = *(u8 *)(r3 +12) 8: r4 *= 14 @@ -1135,26 +1204,31 @@ More complex packet access may look like: 16: r2 += 8 17: r1 = *(u32 *)(r1 +80) /* load skb->data_end */ 18: if r2 > r1 goto pc+2 - R0=inv56 R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv52 R5=pkt(id=0,off=14,r=14) R10=fp + R0=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)) R5=pkt(id=0,off=14,r=14) R10=fp 19: r1 = *(u8 *)(r3 +4) The state of the register R3 is R3=pkt(id=2,off=0,r=8) id=2 means that two 'r3 += rX' instructions were seen, so r3 points to some offset within a packet and since the program author did 'if (r3 + 8 > r1) goto err' at insn #18, the safe range is [R3, R3 + 8). -The verifier only allows 'add' operation on packet registers. Any other -operation will set the register state to 'unknown_value' and it won't be +The verifier only allows 'add'/'sub' operations on packet registers. Any other +operation will set the register state to 'SCALAR_VALUE' and it won't be available for direct packet access. Operation 'r3 += rX' may overflow and become less than original skb->data, -therefore the verifier has to prevent that. So it tracks the number of -upper zero bits in all 'uknown_value' registers, so when it sees -'r3 += rX' instruction and rX is more than 16-bit value, it will error as: -"cannot add integer value with N upper zero bits to ptr_to_packet" +therefore the verifier has to prevent that. So when it sees 'r3 += rX' +instruction and rX is more than 16-bit value, any subsequent bounds-check of r3 +against skb->data_end will not give us 'range' information, so attempts to read +through the pointer will give "invalid access to packet" error. Ex. after insn 'r4 = *(u8 *)(r3 +12)' (insn #7 above) the state of r4 is -R4=inv56 which means that upper 56 bits on the register are guaranteed -to be zero. After insn 'r4 *= 14' the state becomes R4=inv52, since -multiplying 8-bit value by constant 14 will keep upper 52 bits as zero. -Similarly 'r2 >>= 48' will make R2=inv48, since the shift is not sign -extending. This logic is implemented in evaluate_reg_alu() function. +R4=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) which means that upper 56 bits +of the register are guaranteed to be zero, and nothing is known about the lower +8 bits. After insn 'r4 *= 14' the state becomes +R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)), since multiplying an 8-bit +value by constant 14 will keep upper 52 bits as zero, also the least significant +bit will be zero as 14 is even. Similarly 'r2 >>= 48' will make +R2=inv(id=0,umax_value=65535,var_off=(0x0; 0xffff)), since the shift is not sign +extending. This logic is implemented in adjust_reg_min_max_vals() function, +which calls adjust_ptr_min_max_vals() for adding pointer to scalar (or vice +versa) and adjust_scalar_min_max_vals() for operations on two scalars. The end result is that bpf program author can access packet directly using normal C code as: @@ -1214,6 +1288,22 @@ The map is defined by: . key size in bytes . value size in bytes +Pruning +------- +The verifier does not actually walk all possible paths through the program. For +each new branch to analyse, the verifier looks at all the states it's previously +been in when at this instruction. If any of them contain the current state as a +subset, the branch is 'pruned' - that is, the fact that the previous state was +accepted implies the current state would be as well. For instance, if in the +previous state, r1 held a packet-pointer, and in the current state, r1 holds a +packet-pointer with a range as long or longer and at least as strict an +alignment, then r1 is safe. Similarly, if r2 was NOT_INIT before then it can't +have been used by any path from that point, so any value in r2 (including +another NOT_INIT) is safe. The implementation is in the function regsafe(). +Pruning considers not only the registers but also the stack (and any spilled +registers it may hold). They must all be safe for the branch to be pruned. +This is implemented in states_equal(). + Understanding eBPF verifier messages ------------------------------------ diff --git a/Documentation/networking/hinic.txt b/Documentation/networking/hinic.txt new file mode 100644 index 000000000000..989366a4039c --- /dev/null +++ b/Documentation/networking/hinic.txt @@ -0,0 +1,125 @@ +Linux Kernel Driver for Huawei Intelligent NIC(HiNIC) family +============================================================ + +Overview: +========= +HiNIC is a network interface card for the Data Center Area. + +The driver supports a range of link-speed devices (10GbE, 25GbE, 40GbE, etc.). +The driver supports also a negotiated and extendable feature set. + +Some HiNIC devices support SR-IOV. This driver is used for Physical Function +(PF). + +HiNIC devices support MSI-X interrupt vector for each Tx/Rx queue and +adaptive interrupt moderation. + +HiNIC devices support also various offload features such as checksum offload, +TCP Transmit Segmentation Offload(TSO), Receive-Side Scaling(RSS) and +LRO(Large Receive Offload). + + +Supported PCI vendor ID/device IDs: +=================================== + +19e5:1822 - HiNIC PF + + +Driver Architecture and Source Code: +==================================== + +hinic_dev - Implement a Logical Network device that is independent from +specific HW details about HW data structure formats. + +hinic_hwdev - Implement the HW details of the device and include the components +for accessing the PCI NIC. + +hinic_hwdev contains the following components: +=============================================== + +HW Interface: +============= + +The interface for accessing the pci device (DMA memory and PCI BARs). +(hinic_hw_if.c, hinic_hw_if.h) + +Configuration Status Registers Area that describes the HW Registers on the +configuration and status BAR0. (hinic_hw_csr.h) + +MGMT components: +================ + +Asynchronous Event Queues(AEQs) - The event queues for receiving messages from +the MGMT modules on the cards. (hinic_hw_eqs.c, hinic_hw_eqs.h) + +Application Programmable Interface commands(API CMD) - Interface for sending +MGMT commands to the card. (hinic_hw_api_cmd.c, hinic_hw_api_cmd.h) + +Management (MGMT) - the PF to MGMT channel that uses API CMD for sending MGMT +commands to the card and receives notifications from the MGMT modules on the +card by AEQs. Also set the addresses of the IO CMDQs in HW. +(hinic_hw_mgmt.c, hinic_hw_mgmt.h) + +IO components: +============== + +Completion Event Queues(CEQs) - The completion Event Queues that describe IO +tasks that are finished. (hinic_hw_eqs.c, hinic_hw_eqs.h) + +Work Queues(WQ) - Contain the memory and operations for use by CMD queues and +the Queue Pairs. The WQ is a Memory Block in a Page. The Block contains +pointers to Memory Areas that are the Memory for the Work Queue Elements(WQEs). +(hinic_hw_wq.c, hinic_hw_wq.h) + +Command Queues(CMDQ) - The queues for sending commands for IO management and is +used to set the QPs addresses in HW. The commands completion events are +accumulated on the CEQ that is configured to receive the CMDQ completion events. +(hinic_hw_cmdq.c, hinic_hw_cmdq.h) + +Queue Pairs(QPs) - The HW Receive and Send queues for Receiving and Transmitting +Data. (hinic_hw_qp.c, hinic_hw_qp.h, hinic_hw_qp_ctxt.h) + +IO - de/constructs all the IO components. (hinic_hw_io.c, hinic_hw_io.h) + +HW device: +========== + +HW device - de/constructs the HW Interface, the MGMT components on the +initialization of the driver and the IO components on the case of Interface +UP/DOWN Events. (hinic_hw_dev.c, hinic_hw_dev.h) + + +hinic_dev contains the following components: +=============================================== + +PCI ID table - Contains the supported PCI Vendor/Device IDs. +(hinic_pci_tbl.h) + +Port Commands - Send commands to the HW device for port management +(MAC, Vlan, MTU, ...). (hinic_port.c, hinic_port.h) + +Tx Queues - Logical Tx Queues that use the HW Send Queues for transmit. +The Logical Tx queue is not dependent on the format of the HW Send Queue. +(hinic_tx.c, hinic_tx.h) + +Rx Queues - Logical Rx Queues that use the HW Receive Queues for receive. +The Logical Rx queue is not dependent on the format of the HW Receive Queue. +(hinic_rx.c, hinic_rx.h) + +hinic_dev - de/constructs the Logical Tx and Rx Queues. +(hinic_main.c, hinic_dev.h) + + +Miscellaneous: +============= + +Common functions that are used by HW and Logical Device. +(hinic_common.c, hinic_common.h) + + +Support +======= + +If an issue is identified with the released source code on the supported kernel +with a supported adapter, email the specific information related to the issue to +aviad.krawczyk@huawei.com. diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index c4114346f054..057e9fdbfac9 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -84,17 +84,17 @@ Device drivers API ================== The include/net/mac802154.h defines following functions: - - struct ieee802154_dev *ieee802154_alloc_device - (size_t priv_size, struct ieee802154_ops *ops): - allocation of IEEE 802.15.4 compatible device + - struct ieee802154_hw * + ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops): + allocation of IEEE 802.15.4 compatible hardware device - - void ieee802154_free_device(struct ieee802154_dev *dev): - freeing allocated device + - void ieee802154_free_hw(struct ieee802154_hw *hw): + freeing allocated hardware device - - int ieee802154_register_device(struct ieee802154_dev *dev): - register PHY in the system + - int ieee802154_register_hw(struct ieee802154_hw *hw): + register PHY which is the allocated hardware device, in the system - - void ieee802154_unregister_device(struct ieee802154_dev *dev): + - void ieee802154_unregister_hw(struct ieee802154_hw *hw): freeing registered PHY Moreover IEEE 802.15.4 device operations structure should be filled. diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index b5bd87e01f52..66e620866245 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -6,6 +6,7 @@ Contents: .. toctree:: :maxdepth: 2 + batman-adv kapi z8530book diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 974ab47ae53a..b3345d0fe0a6 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -109,7 +109,10 @@ neigh/default/unres_qlen_bytes - INTEGER queued for each unresolved address by other network layers. (added in linux 3.3) Setting negative value is meaningless and will return error. - Default: 65536 Bytes(64KB) + Default: SK_WMEM_MAX, (same as net.core.wmem_default). + Exact value depends on architecture and kernel options, + but should be enough to allow queuing 256 packets + of medium size. neigh/default/unres_qlen - INTEGER The maximum number of packets which may be queued for each @@ -119,7 +122,7 @@ neigh/default/unres_qlen - INTEGER unexpected packet loss. The current default value is calculated according to default value of unres_qlen_bytes and true size of packet. - Default: 31 + Default: 101 mtu_expires - INTEGER Time, in seconds, that cached PMTU information is kept. @@ -353,12 +356,7 @@ tcp_l3mdev_accept - BOOLEAN compiled with CONFIG_NET_L3_MASTER_DEV. tcp_low_latency - BOOLEAN - If set, the TCP stack makes decisions that prefer lower - latency as opposed to higher throughput. By default, this - option is not set meaning that higher throughput is preferred. - An example of an application where this default should be - changed would be a Beowulf compute cluster. - Default: 0 + This is a legacy option, it has no effect anymore. tcp_max_orphans - INTEGER Maximal number of TCP sockets not attached to any user file handle, @@ -1291,8 +1289,7 @@ tag - INTEGER xfrm4_gc_thresh - INTEGER The threshold at which we will start garbage collecting for IPv4 destination cache entries. At twice this value the system will - refuse new allocations. The value must be set below the flowcache - limit (4096 * number of online cpus) to take effect. + refuse new allocations. igmp_link_local_mcast_reports - BOOLEAN Enable IGMP reports for link local multicast groups in the @@ -1356,6 +1353,15 @@ flowlabel_state_ranges - BOOLEAN FALSE: disabled Default: true +flowlabel_reflect - BOOLEAN + Automatically reflect the flow label. Needed for Path MTU + Discovery to work with Equal Cost Multipath Routing in anycast + environments. See RFC 7690 and: + https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01 + TRUE: enabled + FALSE: disabled + Default: FALSE + anycast_src_echo_reply - BOOLEAN Controls the use of anycast addresses as source addresses for ICMPv6 echo reply @@ -1778,8 +1784,7 @@ ratelimit - INTEGER xfrm6_gc_thresh - INTEGER The threshold at which we will start garbage collecting for IPv6 destination cache entries. At twice this value the system will - refuse new allocations. The value must be set below the flowcache - limit (4096 * number of online cpus) to take effect. + refuse new allocations. IPv6 Update by: diff --git a/Documentation/networking/msg_zerocopy.rst b/Documentation/networking/msg_zerocopy.rst new file mode 100644 index 000000000000..77f6d7e25cfd --- /dev/null +++ b/Documentation/networking/msg_zerocopy.rst @@ -0,0 +1,257 @@ + +============ +MSG_ZEROCOPY +============ + +Intro +===== + +The MSG_ZEROCOPY flag enables copy avoidance for socket send calls. +The feature is currently implemented for TCP sockets. + + +Opportunity and Caveats +----------------------- + +Copying large buffers between user process and kernel can be +expensive. Linux supports various interfaces that eschew copying, +such as sendpage and splice. The MSG_ZEROCOPY flag extends the +underlying copy avoidance mechanism to common socket send calls. + +Copy avoidance is not a free lunch. As implemented, with page pinning, +it replaces per byte copy cost with page accounting and completion +notification overhead. As a result, MSG_ZEROCOPY is generally only +effective at writes over around 10 KB. + +Page pinning also changes system call semantics. It temporarily shares +the buffer between process and network stack. Unlike with copying, the +process cannot immediately overwrite the buffer after system call +return without possibly modifying the data in flight. Kernel integrity +is not affected, but a buggy program can possibly corrupt its own data +stream. + +The kernel returns a notification when it is safe to modify data. +Converting an existing application to MSG_ZEROCOPY is not always as +trivial as just passing the flag, then. + + +More Info +--------- + +Much of this document was derived from a longer paper presented at +netdev 2.1. For more in-depth information see that paper and talk, +the excellent reporting over at LWN.net or read the original code. + + paper, slides, video + https://netdevconf.org/2.1/session.html?debruijn + + LWN article + https://lwn.net/Articles/726917/ + + patchset + [PATCH net-next v4 0/9] socket sendmsg MSG_ZEROCOPY + http://lkml.kernel.org/r/20170803202945.70750-1-willemdebruijn.kernel@gmail.com + + +Interface +========= + +Passing the MSG_ZEROCOPY flag is the most obvious step to enable copy +avoidance, but not the only one. + +Socket Setup +------------ + +The kernel is permissive when applications pass undefined flags to the +send system call. By default it simply ignores these. To avoid enabling +copy avoidance mode for legacy processes that accidentally already pass +this flag, a process must first signal intent by setting a socket option: + +:: + + if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &one, sizeof(one))) + error(1, errno, "setsockopt zerocopy"); + + +Transmission +------------ + +The change to send (or sendto, sendmsg, sendmmsg) itself is trivial. +Pass the new flag. + +:: + + ret = send(fd, buf, sizeof(buf), MSG_ZEROCOPY); + +A zerocopy failure will return -1 with errno ENOBUFS. This happens if +the socket option was not set, the socket exceeds its optmem limit or +the user exceeds its ulimit on locked pages. + + +Mixing copy avoidance and copying +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Many workloads have a mixture of large and small buffers. Because copy +avoidance is more expensive than copying for small packets, the +feature is implemented as a flag. It is safe to mix calls with the flag +with those without. + + +Notifications +------------- + +The kernel has to notify the process when it is safe to reuse a +previously passed buffer. It queues completion notifications on the +socket error queue, akin to the transmit timestamping interface. + +The notification itself is a simple scalar value. Each socket +maintains an internal unsigned 32-bit counter. Each send call with +MSG_ZEROCOPY that successfully sends data increments the counter. The +counter is not incremented on failure or if called with length zero. +The counter counts system call invocations, not bytes. It wraps after +UINT_MAX calls. + + +Notification Reception +~~~~~~~~~~~~~~~~~~~~~~ + +The below snippet demonstrates the API. In the simplest case, each +send syscall is followed by a poll and recvmsg on the error queue. + +Reading from the error queue is always a non-blocking operation. The +poll call is there to block until an error is outstanding. It will set +POLLERR in its output flags. That flag does not have to be set in the +events field. Errors are signaled unconditionally. + +:: + + pfd.fd = fd; + pfd.events = 0; + if (poll(&pfd, 1, -1) != 1 || pfd.revents & POLLERR == 0) + error(1, errno, "poll"); + + ret = recvmsg(fd, &msg, MSG_ERRQUEUE); + if (ret == -1) + error(1, errno, "recvmsg"); + + read_notification(msg); + +The example is for demonstration purpose only. In practice, it is more +efficient to not wait for notifications, but read without blocking +every couple of send calls. + +Notifications can be processed out of order with other operations on +the socket. A socket that has an error queued would normally block +other operations until the error is read. Zerocopy notifications have +a zero error code, however, to not block send and recv calls. + + +Notification Batching +~~~~~~~~~~~~~~~~~~~~~ + +Multiple outstanding packets can be read at once using the recvmmsg +call. This is often not needed. In each message the kernel returns not +a single value, but a range. It coalesces consecutive notifications +while one is outstanding for reception on the error queue. + +When a new notification is about to be queued, it checks whether the +new value extends the range of the notification at the tail of the +queue. If so, it drops the new notification packet and instead increases +the range upper value of the outstanding notification. + +For protocols that acknowledge data in-order, like TCP, each +notification can be squashed into the previous one, so that no more +than one notification is outstanding at any one point. + +Ordered delivery is the common case, but not guaranteed. Notifications +may arrive out of order on retransmission and socket teardown. + + +Notification Parsing +~~~~~~~~~~~~~~~~~~~~ + +The below snippet demonstrates how to parse the control message: the +read_notification() call in the previous snippet. A notification +is encoded in the standard error format, sock_extended_err. + +The level and type fields in the control data are protocol family +specific, IP_RECVERR or IPV6_RECVERR. + +Error origin is the new type SO_EE_ORIGIN_ZEROCOPY. ee_errno is zero, +as explained before, to avoid blocking read and write system calls on +the socket. + +The 32-bit notification range is encoded as [ee_info, ee_data]. This +range is inclusive. Other fields in the struct must be treated as +undefined, bar for ee_code, as discussed below. + +:: + + struct sock_extended_err *serr; + struct cmsghdr *cm; + + cm = CMSG_FIRSTHDR(msg); + if (cm->cmsg_level != SOL_IP && + cm->cmsg_type != IP_RECVERR) + error(1, 0, "cmsg"); + + serr = (void *) CMSG_DATA(cm); + if (serr->ee_errno != 0 || + serr->ee_origin != SO_EE_ORIGIN_ZEROCOPY) + error(1, 0, "serr"); + + printf("completed: %u..%u\n", serr->ee_info, serr->ee_data); + + +Deferred copies +~~~~~~~~~~~~~~~ + +Passing flag MSG_ZEROCOPY is a hint to the kernel to apply copy +avoidance, and a contract that the kernel will queue a completion +notification. It is not a guarantee that the copy is elided. + +Copy avoidance is not always feasible. Devices that do not support +scatter-gather I/O cannot send packets made up of kernel generated +protocol headers plus zerocopy user data. A packet may need to be +converted to a private copy of data deep in the stack, say to compute +a checksum. + +In all these cases, the kernel returns a completion notification when +it releases its hold on the shared pages. That notification may arrive +before the (copied) data is fully transmitted. A zerocopy completion +notification is not a transmit completion notification, therefore. + +Deferred copies can be more expensive than a copy immediately in the +system call, if the data is no longer warm in the cache. The process +also incurs notification processing cost for no benefit. For this +reason, the kernel signals if data was completed with a copy, by +setting flag SO_EE_CODE_ZEROCOPY_COPIED in field ee_code on return. +A process may use this signal to stop passing flag MSG_ZEROCOPY on +subsequent requests on the same socket. + + +Implementation +============== + +Loopback +-------- + +Data sent to local sockets can be queued indefinitely if the receive +process does not read its socket. Unbound notification latency is not +acceptable. For this reason all packets generated with MSG_ZEROCOPY +that are looped to a local socket will incur a deferred copy. This +includes looping onto packet sockets (e.g., tcpdump) and tun devices. + + +Testing +======= + +More realistic example code can be found in the kernel source under +tools/testing/selftests/net/msg_zerocopy.c. + +Be cognizant of the loopback constraint. The test can be run between +a pair of hosts. But if run between a local pair of processes, for +instance when run with msg_zerocopy.sh between a veth pair across +namespaces, the test will not show any improvement. For testing, the +loopback restriction can be temporarily relaxed by making +skb_orphan_frags_rx identical to skb_orphan_frags. diff --git a/Documentation/networking/netdev-FAQ.txt b/Documentation/networking/netdev-FAQ.txt index 247a30ba8e17..cfc66ea72329 100644 --- a/Documentation/networking/netdev-FAQ.txt +++ b/Documentation/networking/netdev-FAQ.txt @@ -111,6 +111,14 @@ A: Generally speaking, the patches get triaged quickly (in less than 48h). patch is a good way to ensure your patch is ignored or pushed to the bottom of the priority list. +Q: I submitted multiple versions of the patch series, should I directly update + patchwork for the previous versions of these patch series? + +A: No, please don't interfere with the patch status on patchwork, leave it to + the maintainer to figure out what is the most recent and current version that + should be applied. If there is any doubt, the maintainer will reply and ask + what should be done. + Q: How can I tell what patches are queued up for backporting to the various stable releases? diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/netvsc.txt new file mode 100644 index 000000000000..93560fb1170a --- /dev/null +++ b/Documentation/networking/netvsc.txt @@ -0,0 +1,75 @@ +Hyper-V network driver +====================== + +Compatibility +============= + +This driver is compatible with Windows Server 2012 R2, 2016 and +Windows 10. + +Features +======== + + Checksum offload + ---------------- + The netvsc driver supports checksum offload as long as the + Hyper-V host version does. Windows Server 2016 and Azure + support checksum offload for TCP and UDP for both IPv4 and + IPv6. Windows Server 2012 only supports checksum offload for TCP. + + Receive Side Scaling + -------------------- + Hyper-V supports receive side scaling. For TCP, packets are + distributed among available queues based on IP address and port + number. + + For UDP, we can switch UDP hash level between L3 and L4 by ethtool + command. UDP over IPv4 and v6 can be set differently. The default + hash level is L4. We currently only allow switching TX hash level + from within the guests. + + On Azure, fragmented UDP packets have high loss rate with L4 + hashing. Using L3 hashing is recommended in this case. + + For example, for UDP over IPv4 on eth0: + To include UDP port numbers in hashing: + ethtool -N eth0 rx-flow-hash udp4 sdfn + To exclude UDP port numbers in hashing: + ethtool -N eth0 rx-flow-hash udp4 sd + To show UDP hash level: + ethtool -n eth0 rx-flow-hash udp4 + + Generic Receive Offload, aka GRO + -------------------------------- + The driver supports GRO and it is enabled by default. GRO coalesces + like packets and significantly reduces CPU usage under heavy Rx + load. + + SR-IOV support + -------------- + Hyper-V supports SR-IOV as a hardware acceleration option. If SR-IOV + is enabled in both the vSwitch and the guest configuration, then the + Virtual Function (VF) device is passed to the guest as a PCI + device. In this case, both a synthetic (netvsc) and VF device are + visible in the guest OS and both NIC's have the same MAC address. + + The VF is enslaved by netvsc device. The netvsc driver will transparently + switch the data path to the VF when it is available and up. + Network state (addresses, firewall, etc) should be applied only to the + netvsc device; the slave device should not be accessed directly in + most cases. The exceptions are if some special queue discipline or + flow direction is desired, these should be applied directly to the + VF slave device. + + Receive Buffer + -------------- + Packets are received into a receive area which is created when device + is probed. The receive area is broken into MTU sized chunks and each may + contain one or more packets. The number of receive sections may be changed + via ethtool Rx ring parameters. + + There is a similar send buffer which is used to aggregate packets for sending. + The send area is broken into chunks of 6144 bytes, each of section may + contain one or more packets. The send buffer is an optimization, the driver + will use slower method to handle very large packets or if the send buffer + area is exhausted. diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt index 497d668288f9..433b6724797a 100644 --- a/Documentation/networking/nf_conntrack-sysctl.txt +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -96,17 +96,6 @@ nf_conntrack_max - INTEGER Size of connection tracking table. Default value is nf_conntrack_buckets value * 4. -nf_conntrack_default_on - BOOLEAN - 0 - don't register conntrack in new net namespaces - 1 - register conntrack in new net namespaces (default) - - This controls wheter newly created network namespaces have connection - tracking enabled by default. It will be enabled automatically - regardless of this setting if the new net namespace requires - connection tracking, e.g. when NAT rules are created. - This setting is only visible in initial user namespace, it has no - effect on existing namespaces. - nf_conntrack_tcp_be_liberal - BOOLEAN 0 - disabled (default) not 0 - enabled diff --git a/Documentation/networking/rmnet.txt b/Documentation/networking/rmnet.txt new file mode 100644 index 000000000000..6b341eaf2062 --- /dev/null +++ b/Documentation/networking/rmnet.txt @@ -0,0 +1,82 @@ +1. Introduction + +rmnet driver is used for supporting the Multiplexing and aggregation +Protocol (MAP). This protocol is used by all recent chipsets using Qualcomm +Technologies, Inc. modems. + +This driver can be used to register onto any physical network device in +IP mode. Physical transports include USB, HSIC, PCIe and IP accelerator. + +Multiplexing allows for creation of logical netdevices (rmnet devices) to +handle multiple private data networks (PDN) like a default internet, tethering, +multimedia messaging service (MMS) or IP media subsystem (IMS). Hardware sends +packets with MAP headers to rmnet. Based on the multiplexer id, rmnet +routes to the appropriate PDN after removing the MAP header. + +Aggregation is required to achieve high data rates. This involves hardware +sending aggregated bunch of MAP frames. rmnet driver will de-aggregate +these MAP frames and send them to appropriate PDN's. + +2. Packet format + +a. MAP packet (data / control) + +MAP header has the same endianness of the IP packet. + +Packet format - + +Bit 0 1 2-7 8 - 15 16 - 31 +Function Command / Data Reserved Pad Multiplexer ID Payload length +Bit 32 - x +Function Raw Bytes + +Command (1)/ Data (0) bit value is to indicate if the packet is a MAP command +or data packet. Control packet is used for transport level flow control. Data +packets are standard IP packets. + +Reserved bits are usually zeroed out and to be ignored by receiver. + +Padding is number of bytes to be added for 4 byte alignment if required by +hardware. + +Multiplexer ID is to indicate the PDN on which data has to be sent. + +Payload length includes the padding length but does not include MAP header +length. + +b. MAP packet (command specific) + +Bit 0 1 2-7 8 - 15 16 - 31 +Function Command Reserved Pad Multiplexer ID Payload length +Bit 32 - 39 40 - 45 46 - 47 48 - 63 +Function Command name Reserved Command Type Reserved +Bit 64 - 95 +Function Transaction ID +Bit 96 - 127 +Function Command data + +Command 1 indicates disabling flow while 2 is enabling flow + +Command types - +0 for MAP command request +1 is to acknowledge the receipt of a command +2 is for unsupported commands +3 is for error during processing of commands + +c. Aggregation + +Aggregation is multiple MAP packets (can be data or command) delivered to +rmnet in a single linear skb. rmnet will process the individual +packets and either ACK the MAP command or deliver the IP packet to the +network stack as needed + +MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional padding.... +MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad... + +3. Userspace configuration + +rmnet userspace configuration is done through netlink library librmnetctl +and command line utility rmnetcli. Utility is hosted in codeaurora forum git. +The driver uses rtnl_link_ops for communication. + +https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/dataservices/tree/rmnetctl diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 8c70ba5dee4d..810620153a44 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -818,10 +818,15 @@ The kernel interface functions are as follows: (*) Send data through a call. + typedef void (*rxrpc_notify_end_tx_t)(struct sock *sk, + unsigned long user_call_ID, + struct sk_buff *skb); + int rxrpc_kernel_send_data(struct socket *sock, struct rxrpc_call *call, struct msghdr *msg, - size_t len); + size_t len, + rxrpc_notify_end_tx_t notify_end_rx); This is used to supply either the request part of a client call or the reply part of a server call. msg.msg_iovlen and msg.msg_iov specify the @@ -832,6 +837,11 @@ The kernel interface functions are as follows: The msg must not specify a destination address, control data or any flags other than MSG_MORE. len is the total amount of data to transmit. + notify_end_rx can be NULL or it can be used to specify a function to be + called when the call changes state to end the Tx phase. This function is + called with the call-state spinlock held to prevent any reply or final ACK + from being delivered first. + (*) Receive data from a call. int rxrpc_kernel_recv_data(struct socket *sock, @@ -965,6 +975,51 @@ The kernel interface functions are as follows: size should be set when the call is begun. tx_total_len may not be less than zero. + (*) Check to see the completion state of a call so that the caller can assess + whether it needs to be retried. + + enum rxrpc_call_completion { + RXRPC_CALL_SUCCEEDED, + RXRPC_CALL_REMOTELY_ABORTED, + RXRPC_CALL_LOCALLY_ABORTED, + RXRPC_CALL_LOCAL_ERROR, + RXRPC_CALL_NETWORK_ERROR, + }; + + int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call, + enum rxrpc_call_completion *_compl, + u32 *_abort_code); + + On return, -EINPROGRESS will be returned if the call is still ongoing; if + it is finished, *_compl will be set to indicate the manner of completion, + *_abort_code will be set to any abort code that occurred. 0 will be + returned on a successful completion, -ECONNABORTED will be returned if the + client failed due to a remote abort and anything else will return an + appropriate error code. + + The caller should look at this information to decide if it's worth + retrying the call. + + (*) Retry a client call. + + int rxrpc_kernel_retry_call(struct socket *sock, + struct rxrpc_call *call, + struct sockaddr_rxrpc *srx, + struct key *key); + + This attempts to partially reinitialise a call and submit it again whilst + reusing the original call's Tx queue to avoid the need to repackage and + re-encrypt the data to be sent. call indicates the call to retry, srx the + new address to send it to and key the encryption key to use for signing or + encrypting the packets. + + For this to work, the first Tx data packet must still be in the transmit + queue, and currently this is only permitted for local and network errors + and the call must not have been aborted. Any partially constructed Tx + packet is left as is and can continue being filled afterwards. + + It returns 0 if the call was requeued and an error otherwise. + ======================= CONFIGURABLE PARAMETERS diff --git a/Documentation/networking/strparser.txt b/Documentation/networking/strparser.txt index a0bf573dfa61..13081b3decef 100644 --- a/Documentation/networking/strparser.txt +++ b/Documentation/networking/strparser.txt @@ -1,45 +1,107 @@ -Stream Parser -------------- +Stream Parser (strparser) + +Introduction +============ The stream parser (strparser) is a utility that parses messages of an -application layer protocol running over a TCP connection. The stream +application layer protocol running over a data stream. The stream parser works in conjunction with an upper layer in the kernel to provide kernel support for application layer messages. For instance, Kernel Connection Multiplexor (KCM) uses the Stream Parser to parse messages using a BPF program. +The strparser works in one of two modes: receive callback or general +mode. + +In receive callback mode, the strparser is called from the data_ready +callback of a TCP socket. Messages are parsed and delivered as they are +received on the socket. + +In general mode, a sequence of skbs are fed to strparser from an +outside source. Message are parsed and delivered as the sequence is +processed. This modes allows strparser to be applied to arbitrary +streams of data. + Interface ---------- +========= The API includes a context structure, a set of callbacks, utility -functions, and a data_ready function. The callbacks include -a parse_msg function that is called to perform parsing (e.g. -BPF parsing in case of KCM), and a rcv_msg function that is called -when a full message has been completed. +functions, and a data_ready function for receive callback mode. The +callbacks include a parse_msg function that is called to perform +parsing (e.g. BPF parsing in case of KCM), and a rcv_msg function +that is called when a full message has been completed. + +Functions +========= + +strp_init(struct strparser *strp, struct sock *sk, + const struct strp_callbacks *cb) + + Called to initialize a stream parser. strp is a struct of type + strparser that is allocated by the upper layer. sk is the TCP + socket associated with the stream parser for use with receive + callback mode; in general mode this is set to NULL. Callbacks + are called by the stream parser (the callbacks are listed below). + +void strp_pause(struct strparser *strp) + + Temporarily pause a stream parser. Message parsing is suspended + and no new messages are delivered to the upper layer. + +void strp_pause(struct strparser *strp) + + Unpause a paused stream parser. + +void strp_stop(struct strparser *strp); + + strp_stop is called to completely stop stream parser operations. + This is called internally when the stream parser encounters an + error, and it is called from the upper layer to stop parsing + operations. + +void strp_done(struct strparser *strp); + + strp_done is called to release any resources held by the stream + parser instance. This must be called after the stream processor + has been stopped. -A stream parser can be instantiated for a TCP connection. This is done -by: +int strp_process(struct strparser *strp, struct sk_buff *orig_skb, + unsigned int orig_offset, size_t orig_len, + size_t max_msg_size, long timeo) -strp_init(struct strparser *strp, struct sock *csk, - struct strp_callbacks *cb) + strp_process is called in general mode for a stream parser to + parse an sk_buff. The number of bytes processed or a negative + error number is returned. Note that strp_process does not + consume the sk_buff. max_msg_size is maximum size the stream + parser will parse. timeo is timeout for completing a message. -strp is a struct of type strparser that is allocated by the upper layer. -csk is the TCP socket associated with the stream parser. Callbacks are -called by the stream parser. +void strp_data_ready(struct strparser *strp); + + The upper layer calls strp_tcp_data_ready when data is ready on + the lower socket for strparser to process. This should be called + from a data_ready callback that is set on the socket. Note that + maximum messages size is the limit of the receive socket + buffer and message timeout is the receive timeout for the socket. + +void strp_check_rcv(struct strparser *strp); + + strp_check_rcv is called to check for new messages on the socket. + This is normally called at initialization of a stream parser + instance or after strp_unpause. Callbacks ---------- +========= -There are four callbacks: +There are six callbacks: int (*parse_msg)(struct strparser *strp, struct sk_buff *skb); parse_msg is called to determine the length of the next message in the stream. The upper layer must implement this function. It should parse the sk_buff as containing the headers for the - next application layer messages in the stream. + next application layer message in the stream. - The skb->cb in the input skb is a struct strp_rx_msg. Only + The skb->cb in the input skb is a struct strp_msg. Only the offset field is relevant in parse_msg and gives the offset where the message starts in the skb. @@ -50,26 +112,41 @@ int (*parse_msg)(struct strparser *strp, struct sk_buff *skb); -ESTRPIPE : current message should not be processed by the kernel, return control of the socket to userspace which can proceed to read the messages itself - other < 0 : Error is parsing, give control back to userspace + other < 0 : Error in parsing, give control back to userspace assuming that synchronization is lost and the stream is unrecoverable (application expected to close TCP socket) In the case that an error is returned (return value is less than - zero) the stream parser will set the error on TCP socket and wake - it up. If parse_msg returned -ESTRPIPE and the stream parser had - previously read some bytes for the current message, then the error - set on the attached socket is ENODATA since the stream is - unrecoverable in that case. + zero) and the parser is in receive callback mode, then it will set + the error on TCP socket and wake it up. If parse_msg returned + -ESTRPIPE and the stream parser had previously read some bytes for + the current message, then the error set on the attached socket is + ENODATA since the stream is unrecoverable in that case. + +void (*lock)(struct strparser *strp) + + The lock callback is called to lock the strp structure when + the strparser is performing an asynchronous operation (such as + processing a timeout). In receive callback mode the default + function is to lock_sock for the associated socket. In general + mode the callback must be set appropriately. + +void (*unlock)(struct strparser *strp) + + The unlock callback is called to release the lock obtained + by the lock callback. In receive callback mode the default + function is release_sock for the associated socket. In general + mode the callback must be set appropriately. void (*rcv_msg)(struct strparser *strp, struct sk_buff *skb); rcv_msg is called when a full message has been received and is queued. The callee must consume the sk_buff; it can call strp_pause to prevent any further messages from being - received in rcv_msg (see strp_pause below). This callback + received in rcv_msg (see strp_pause above). This callback must be set. - The skb->cb in the input skb is a struct strp_rx_msg. This + The skb->cb in the input skb is a struct strp_msg. This struct contains two fields: offset and full_len. Offset is where the message starts in the skb, and full_len is the the length of the message. skb->len - offset may be greater @@ -78,59 +155,53 @@ void (*rcv_msg)(struct strparser *strp, struct sk_buff *skb); int (*read_sock_done)(struct strparser *strp, int err); read_sock_done is called when the stream parser is done reading - the TCP socket. The stream parser may read multiple messages - in a loop and this function allows cleanup to occur when existing - the loop. If the callback is not set (NULL in strp_init) a - default function is used. + the TCP socket in receive callback mode. The stream parser may + read multiple messages in a loop and this function allows cleanup + to occur when exiting the loop. If the callback is not set (NULL + in strp_init) a default function is used. void (*abort_parser)(struct strparser *strp, int err); This function is called when stream parser encounters an error - in parsing. The default function stops the stream parser for the - TCP socket and sets the error in the socket. The default function - can be changed by setting the callback to non-NULL in strp_init. + in parsing. The default function stops the stream parser and + sets the error in the socket if the parser is in receive callback + mode. The default function can be changed by setting the callback + to non-NULL in strp_init. -Functions ---------- +Statistics +========== -The upper layer calls strp_tcp_data_ready when data is ready on the lower -socket for strparser to process. This should be called from a data_ready -callback that is set on the socket. +Various counters are kept for each stream parser instance. These are in +the strp_stats structure. strp_aggr_stats is a convenience structure for +accumulating statistics for multiple stream parser instances. +save_strp_stats and aggregate_strp_stats are helper functions to save +and aggregate statistics. -strp_stop is called to completely stop stream parser operations. This -is called internally when the stream parser encounters an error, and -it is called from the upper layer when unattaching a TCP socket. +Message assembly limits +======================= -strp_done is called to unattach the stream parser from the TCP socket. -This must be called after the stream processor has be stopped. +The stream parser provide mechanisms to limit the resources consumed by +message assembly. -strp_check_rcv is called to check for new messages on the socket. This -is normally called at initialization of the a stream parser instance -of after strp_unpause. +A timer is set when assembly starts for a new message. In receive +callback mode the message timeout is taken from rcvtime for the +associated TCP socket. In general mode, the timeout is passed as an +argument in strp_process. If the timer fires before assembly completes +the stream parser is aborted and the ETIMEDOUT error is set on the TCP +socket if in receive callback mode. -Statistics ----------- +In receive callback mode, message length is limited to the receive +buffer size of the associated TCP socket. If the length returned by +parse_msg is greater than the socket buffer size then the stream parser +is aborted with EMSGSIZE error set on the TCP socket. Note that this +makes the maximum size of receive skbuffs for a socket with a stream +parser to be 2*sk_rcvbuf of the TCP socket. -Various counters are kept for each stream parser for a TCP socket. -These are in the strp_stats structure. strp_aggr_stats is a convenience -structure for accumulating statistics for multiple stream parser -instances. save_strp_stats and aggregate_strp_stats are helper functions -to save and aggregate statistics. +In general mode the message length limit is passed in as an argument +to strp_process. -Message assembly limits ------------------------ +Author +====== -The stream parser provide mechanisms to limit the resources consumed by -message assembly. +Tom Herbert (tom@quantonium.net) -A timer is set when assembly starts for a new message. The message -timeout is taken from rcvtime for the associated TCP socket. If the -timer fires before assembly completes the stream parser is aborted -and the ETIMEDOUT error is set on the TCP socket. - -Message length is limited to the receive buffer size of the associated -TCP socket. If the length returned by parse_msg is greater than -the socket buffer size then the stream parser is aborted with -EMSGSIZE error set on the TCP socket. Note that this makes the -maximum size of receive skbuffs for a socket with a stream parser -to be 2*sk_rcvbuf of the TCP socket. diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt index dbd40d879239..8d8d8f58f96f 100644 --- a/Documentation/nvmem/nvmem.txt +++ b/Documentation/nvmem/nvmem.txt @@ -112,7 +112,7 @@ take nvmem_device as parameter. 5. Releasing a reference to the NVMEM ===================================== -When a consumers no longer needs the NVMEM, it has to release the reference +When a consumer no longer needs the NVMEM, it has to release the reference to the NVMEM it has obtained using the APIs mentioned in the above section. The NVMEM framework provides 2 APIs to release a reference to the NVMEM. diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt deleted file mode 100644 index bc4548245a24..000000000000 --- a/Documentation/power/states.txt +++ /dev/null @@ -1,125 +0,0 @@ -System Power Management Sleep States - -(C) 2014 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> - -The kernel supports up to four system sleep states generically, although three -of them depend on the platform support code to implement the low-level details -for each state. - -The states are represented by strings that can be read or written to the -/sys/power/state file. Those strings may be "mem", "standby", "freeze" and -"disk", where the last three always represent Power-On Suspend (if supported), -Suspend-To-Idle and hibernation (Suspend-To-Disk), respectively. - -The meaning of the "mem" string is controlled by the /sys/power/mem_sleep file. -It contains strings representing the available modes of system suspend that may -be triggered by writing "mem" to /sys/power/state. These modes are "s2idle" -(Suspend-To-Idle), "shallow" (Power-On Suspend) and "deep" (Suspend-To-RAM). -The "s2idle" mode is always available, while the other ones are only available -if supported by the platform (if not supported, the strings representing them -are not present in /sys/power/mem_sleep). The string representing the suspend -mode to be used subsequently is enclosed in square brackets. Writing one of -the other strings present in /sys/power/mem_sleep to it causes the suspend mode -to be used subsequently to change to the one represented by that string. - -Consequently, there are two ways to cause the system to go into the -Suspend-To-Idle sleep state. The first one is to write "freeze" directly to -/sys/power/state. The second one is to write "s2idle" to /sys/power/mem_sleep -and then to write "mem" to /sys/power/state. Similarly, there are two ways -to cause the system to go into the Power-On Suspend sleep state (the strings to -write to the control files in that case are "standby" or "shallow" and "mem", -respectively) if that state is supported by the platform. In turn, there is -only one way to cause the system to go into the Suspend-To-RAM state (write -"deep" into /sys/power/mem_sleep and "mem" into /sys/power/state). - -The default suspend mode (ie. the one to be used without writing anything into -/sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or -"s2idle", but it can be overridden by the value of the "mem_sleep_default" -parameter in the kernel command line. - -The properties of all of the sleep states are described below. - - -State: Suspend-To-Idle -ACPI state: S0 -Label: "s2idle" ("freeze") - -This state is a generic, pure software, light-weight, system sleep state. -It allows more energy to be saved relative to runtime idle by freezing user -space and putting all I/O devices into low-power states (possibly -lower-power than available at run time), such that the processors can -spend more time in their idle states. - -This state can be used for platforms without Power-On Suspend/Suspend-to-RAM -support, or it can be used in addition to Suspend-to-RAM to provide reduced -resume latency. It is always supported. - - -State: Standby / Power-On Suspend -ACPI State: S1 -Label: "shallow" ("standby") - -This state, if supported, offers moderate, though real, power savings, while -providing a relatively low-latency transition back to a working system. No -operating state is lost (the CPU retains power), so the system easily starts up -again where it left off. - -In addition to freezing user space and putting all I/O devices into low-power -states, which is done for Suspend-To-Idle too, nonboot CPUs are taken offline -and all low-level system functions are suspended during transitions into this -state. For this reason, it should allow more energy to be saved relative to -Suspend-To-Idle, but the resume latency will generally be greater than for that -state. - - -State: Suspend-to-RAM -ACPI State: S3 -Label: "deep" - -This state, if supported, offers significant power savings as everything in the -system is put into a low-power state, except for memory, which should be placed -into the self-refresh mode to retain its contents. All of the steps carried out -when entering Power-On Suspend are also carried out during transitions to STR. -Additional operations may take place depending on the platform capabilities. In -particular, on ACPI systems the kernel passes control to the BIOS (platform -firmware) as the last step during STR transitions and that usually results in -powering down some more low-level components that aren't directly controlled by -the kernel. - -System and device state is saved and kept in memory. All devices are suspended -and put into low-power states. In many cases, all peripheral buses lose power -when entering STR, so devices must be able to handle the transition back to the -"on" state. - -For at least ACPI, STR requires some minimal boot-strapping code to resume the -system from it. This may be the case on other platforms too. - - -State: Suspend-to-disk -ACPI State: S4 -Label: "disk" - -This state offers the greatest power savings, and can be used even in -the absence of low-level platform support for power management. This -state operates similarly to Suspend-to-RAM, but includes a final step -of writing memory contents to disk. On resume, this is read and memory -is restored to its pre-suspend state. - -STD can be handled by the firmware or the kernel. If it is handled by -the firmware, it usually requires a dedicated partition that must be -setup via another operating system for it to use. Despite the -inconvenience, this method requires minimal work by the kernel, since -the firmware will also handle restoring memory contents on resume. - -For suspend-to-disk, a mechanism called 'swsusp' (Swap Suspend) is used -to write memory contents to free swap space. swsusp has some restrictive -requirements, but should work in most cases. Some, albeit outdated, -documentation can be found in Documentation/power/swsusp.txt. -Alternatively, userspace can do most of the actual suspend to disk work, -see userland-swsusp.txt. - -Once memory state is written to disk, the system may either enter a -low-power state (like ACPI S4), or it may simply power down. Powering -down offers greater savings, and allows this mechanism to work on any -system. However, entering a real low-power state allows the user to -trigger wake up events (e.g. pressing a key or opening a laptop lid). diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 074670b98bac..361789df51ec 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -75,6 +75,16 @@ used when printing stack backtraces. The specifier takes into consideration the effect of compiler optimisations which may occur when tail-call``s are used and marked with the noreturn GCC attribute. +Examples:: + + printk("Going to call: %pF\n", gettimeofday); + printk("Going to call: %pF\n", p->func); + printk("%s: called from %pS\n", __func__, (void *)_RET_IP_); + printk("%s: called from %pS\n", __func__, + (void *)__builtin_return_address(0)); + printk("Faulted at %pS\n", (void *)regs->ip); + printk(" %s%pB\n", (reliable ? "" : "? "), (void *)*stack); + Kernel Pointers =============== diff --git a/Documentation/process/applying-patches.rst b/Documentation/process/applying-patches.rst index a0d058cc6d25..dc2ddc345044 100644 --- a/Documentation/process/applying-patches.rst +++ b/Documentation/process/applying-patches.rst @@ -6,9 +6,6 @@ Applying Patches To The Linux Kernel Original by: Jesper Juhl, August 2005 -Last update: - 2016-09-14 - .. note:: This document is obsolete. In most cases, rather than using ``patch`` @@ -344,7 +341,7 @@ possible. This is a good branch to run for people who want to help out testing development kernels but do not want to run some of the really experimental -stuff (such people should see the sections about -git and -mm kernels below). +stuff (such people should see the sections about -next and -mm kernels below). The -rc patches are not incremental, they apply to a base 4.x kernel, just like the 4.x.y patches described above. The kernel version before the -rcN @@ -380,44 +377,6 @@ Here are 3 examples of how to apply these patches:: $ mv linux-4.7.3 linux-4.8-rc5 # rename the kernel source dir -The -git kernels -================ - -These are daily snapshots of Linus' kernel tree (managed in a git -repository, hence the name). - -These patches are usually released daily and represent the current state of -Linus's tree. They are more experimental than -rc kernels since they are -generated automatically without even a cursory glance to see if they are -sane. - --git patches are not incremental and apply either to a base 4.x kernel or -a base 4.x-rc kernel -- you can see which from their name. -A patch named 4.7-git1 applies to the 4.7 kernel source and a patch -named 4.8-rc3-git2 applies to the source of the 4.8-rc3 kernel. - -Here are some examples of how to apply these patches:: - - # moving from 4.7 to 4.7-git1 - - $ cd ~/linux-4.7 # change to the kernel source dir - $ patch -p1 < ../patch-4.7-git1 # apply the 4.7-git1 patch - $ cd .. - $ mv linux-4.7 linux-4.7-git1 # rename the kernel source dir - - # moving from 4.7-git1 to 4.8-rc2-git3 - - $ cd ~/linux-4.7-git1 # change to the kernel source dir - $ patch -p1 -R < ../patch-4.7-git1 # revert the 4.7-git1 patch - # we now have a 4.7 kernel - $ patch -p1 < ../patch-4.8-rc2 # apply the 4.8-rc2 patch - # the kernel is now 4.8-rc2 - $ patch -p1 < ../patch-4.8-rc2-git3 # apply the 4.8-rc2-git3 patch - # the kernel is now 4.8-rc2-git3 - $ cd .. - $ mv linux-4.7-git1 linux-4.8-rc2-git3 # rename source dir - - The -mm patches and the linux-next tree ======================================= diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index adbb50ae5246..560beaef5a7c 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -53,7 +53,7 @@ mcelog 0.6 mcelog --version iptables 1.4.2 iptables -V openssl & libcrypto 1.0.0 openssl version bc 1.06.95 bc --version -Sphinx\ [#f1]_ 1.2 sphinx-build --version +Sphinx\ [#f1]_ 1.3 sphinx-build --version ====================== =============== ======================================== .. [#f1] Sphinx is needed only to build the Kernel documentation @@ -309,18 +309,8 @@ Kernel documentation Sphinx ------ -The ReST markups currently used by the Documentation/ files are meant to be -built with ``Sphinx`` version 1.2 or upper. If you're desiring to build -PDF outputs, it is recommended to use version 1.4.6. - -.. note:: - - Please notice that, for PDF and LaTeX output, you'll also need ``XeLaTeX`` - version 3.14159265. Depending on the distribution, you may also need to - install a series of ``texlive`` packages that provide the minimal set of - functionalities required for ``XeLaTex`` to work. For PDF output you'll also - need ``convert(1)`` from ImageMagick (https://www.imagemagick.org). - +Please see :ref:`sphinx_install` in ``Documentation/doc-guide/sphinx.rst`` +for details about Sphinx requirements. Getting updated software ======================== diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst index 61e9c78bd6d1..36a2dded525b 100644 --- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -166,12 +166,12 @@ Trees - The queues of patches, for both completed versions and in progress versions can be found at: - http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git + https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git - The finalized and tagged releases of all stable kernels can be found in separate branches per version at: - http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git Review committee diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 3e10719fee35..733478ade91b 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -413,7 +413,7 @@ e-mail discussions. -11) Sign your work — the Developer's Certificate of Origin +11) Sign your work - the Developer's Certificate of Origin ---------------------------------------------------------- To improve tracking of who did what, especially with patches that can diff --git a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst index 1648fa80b3bf..1266eeae45f6 100644 --- a/Documentation/security/keys/core.rst +++ b/Documentation/security/keys/core.rst @@ -16,17 +16,7 @@ The key service can be configured on by enabling: This document has the following sections: - - Key overview - - Key service overview - - Key access permissions - - SELinux support - - New procfs files - - Userspace system call interface - - Kernel services - - Notes on accessing payload contents - - Defining a key type - - Request-key callback service - - Garbage collection +.. contents:: :local: Key Overview @@ -443,7 +433,7 @@ The main syscalls are: /sbin/request-key will be invoked in an attempt to obtain a key. The callout_info string will be passed as an argument to the program. - See also Documentation/security/keys-request-key.txt. + See also Documentation/security/keys/request-key.rst. The keyctl syscall functions are: @@ -973,7 +963,7 @@ payload contents" for more information. If successful, the key will have been attached to the default keyring for implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING. - See also Documentation/security/keys-request-key.txt. + See also Documentation/security/keys/request-key.rst. * To search for a key, passing auxiliary data to the upcaller, call:: diff --git a/Documentation/security/keys/request-key.rst b/Documentation/security/keys/request-key.rst index aba32784174c..b2d16abaa9e9 100644 --- a/Documentation/security/keys/request-key.rst +++ b/Documentation/security/keys/request-key.rst @@ -3,7 +3,7 @@ Key Request Service =================== The key request service is part of the key retention service (refer to -Documentation/security/keys.txt). This document explains more fully how +Documentation/security/core.rst). This document explains more fully how the requesting algorithm works. The process starts by either the kernel requesting a service by calling diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst index 7b503831bdea..3bb24e09a332 100644 --- a/Documentation/security/keys/trusted-encrypted.rst +++ b/Documentation/security/keys/trusted-encrypted.rst @@ -172,4 +172,4 @@ Other uses for trusted and encrypted keys, such as for disk and file encryption are anticipated. In particular the new format 'ecryptfs' has been defined in in order to use encrypted keys to mount an eCryptfs filesystem. More details about the usage can be found in the file -``Documentation/security/keys-ecryptfs.txt``. +``Documentation/security/keys/ecryptfs.rst``. diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css index d5764a4de5a2..522b6d4c49d4 100644 --- a/Documentation/sphinx-static/theme_overrides.css +++ b/Documentation/sphinx-static/theme_overrides.css @@ -4,6 +4,17 @@ * */ +/* Interim: Code-blocks with line nos - lines and line numbers don't line up. + * see: https://github.com/rtfd/sphinx_rtd_theme/issues/419 + */ + +div[class^="highlight"] pre { + line-height: normal; +} +.rst-content .highlight > pre { + line-height: normal; +} + @media screen { /* content column @@ -56,6 +67,12 @@ font-family: "Courier New", Courier, monospace } + /* fix bottom margin of lists items */ + + .rst-content .section ul li:last-child, .rst-content .section ul li p:last-child { + margin-bottom: 12px; + } + /* inline literal: drop the borderbox, padding and red color */ code, .rst-content tt, .rst-content code { diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py index d15e07f36881..39aa9e8697cc 100644 --- a/Documentation/sphinx/kerneldoc.py +++ b/Documentation/sphinx/kerneldoc.py @@ -27,6 +27,7 @@ # Please make sure this works on both python2 and python3. # +import codecs import os import subprocess import sys @@ -88,13 +89,10 @@ class KernelDocDirective(Directive): try: env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd))) - p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True) + p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE) out, err = p.communicate() - # python2 needs conversion to unicode. - # python3 with universal_newlines=True returns strings. - if sys.version_info.major < 3: - out, err = unicode(out, 'utf-8'), unicode(err, 'utf-8') + out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8') if p.returncode != 0: sys.stderr.write(err) diff --git a/Documentation/sphinx/requirements.txt b/Documentation/sphinx/requirements.txt new file mode 100644 index 000000000000..742be3e12619 --- /dev/null +++ b/Documentation/sphinx/requirements.txt @@ -0,0 +1,3 @@ +docutils==0.12 +Sphinx==1.4.9 +sphinx_rtd_theme diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt index b83dfa1c0602..ab16efe0c79d 100644 --- a/Documentation/static-keys.txt +++ b/Documentation/static-keys.txt @@ -149,6 +149,26 @@ static_branch_inc(), will change the branch back to true. Likewise, if the key is initialized false, a 'static_branch_inc()', will change the branch to true. And then a 'static_branch_dec()', will again make the branch false. +The state and the reference count can be retrieved with 'static_key_enabled()' +and 'static_key_count()'. In general, if you use these functions, they +should be protected with the same mutex used around the enable/disable +or increment/decrement function. + +Note that switching branches results in some locks being taken, +particularly the CPU hotplug lock (in order to avoid races against +CPUs being brought in the kernel whilst the kernel is getting +patched). Calling the static key API from within a hotplug notifier is +thus a sure deadlock recipe. In order to still allow use of the +functionnality, the following functions are provided: + + static_key_enable_cpuslocked() + static_key_disable_cpuslocked() + static_branch_enable_cpuslocked() + static_branch_disable_cpuslocked() + +These functions are *not* general purpose, and must only be used when +you really know that you're in the above context, and no other. + Where an array of keys is required, it can be defined as:: DEFINE_STATIC_KEY_ARRAY_TRUE(keys, count); diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index bac23c198360..ce61d1fe08ca 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -61,6 +61,7 @@ show up in /proc/sys/kernel: - perf_cpu_time_max_percent - perf_event_paranoid - perf_event_max_stack +- perf_event_mlock_kb - perf_event_max_contexts_per_stack - pid_max - powersave-nap [ PPC only ] @@ -654,7 +655,9 @@ Controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The default value is 2. -1: Allow use of (almost) all events by all users ->=0: Disallow raw tracepoint access by users without CAP_IOC_LOCK + Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK +>=0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN + Disallow raw tracepoint access by users without CAP_SYS_ADMIN >=1: Disallow CPU event access by users without CAP_SYS_ADMIN >=2: Disallow kernel profiling by users without CAP_SYS_ADMIN @@ -673,6 +676,14 @@ The default value is 127. ============================================================== +perf_event_mlock_kb: + +Control size of per-cpu ring buffer not counted agains mlock limit. + +The default value is 512 + 1 page + +============================================================== + perf_event_max_contexts_per_stack: Controls maximum number of stack frame context entries for diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 28596e03220b..b67044a2575f 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -46,13 +46,13 @@ translate these BPF proglets into native CPU instructions. There are two flavors of JITs, the newer eBPF JIT currently supported on: - x86_64 - arm64 + - arm32 - ppc64 - sparc64 - mips64 - s390x And the older cBPF JIT supported on the following archs: - - arm - mips - ppc - sparc diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 48244c42ff52..9baf66a9ef4e 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -572,7 +572,9 @@ See Documentation/nommu-mmap.txt for more information. numa_zonelist_order -This sysctl is only for NUMA. +This sysctl is only for NUMA and it is deprecated. Anything but +Node order will fail! + 'where the memory is allocated from' is controlled by zonelists. (This documentation ignores ZONE_HIGHMEM/ZONE_DMA32 for simple explanation. you may be able to read ZONE_DMA as ZONE_DMA32...) diff --git a/Documentation/trace/stm.txt b/Documentation/trace/stm.txt index 11cff47eecce..03765750104b 100644 --- a/Documentation/trace/stm.txt +++ b/Documentation/trace/stm.txt @@ -83,7 +83,7 @@ by writing the name of the desired stm device there, for example: $ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link For examples on how to use stm_source interface in the kernel, refer -to stm_console or stm_heartbeat drivers. +to stm_console, stm_heartbeat or stm_ftrace drivers. Each stm_source device will need to assume a master and a range of channels, depending on how many channels it requires. These are @@ -107,5 +107,16 @@ console in the STP stream, create a "console" policy entry (see the beginning of this text on how to do that). When initialized, it will consume one channel. +stm_ftrace +========== + +This is another "stm_source" device, once the stm_ftrace has been +linked with an stm device, and if "function" tracer is enabled, +function address and parent function address which Ftrace subsystem +would store into ring buffer will be exported via the stm device at +the same time. + +Currently only Ftrace "function" tracer is supported. + [1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf [2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index 38310dcd6620..bc80fc0e210f 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -1956,10 +1956,7 @@ MMIO 쓰기 배리어 뒤에 완료됩니다. ACQUIRE 앞에서 요청된 메모리 오퍼레이션은 ACQUIRE 오퍼레이션이 완료된 후에 - 완료될 수 있습니다. smp_mb__before_spinlock() 뒤에 ACQUIRE 가 실행되는 - 코드 블록은 블록 앞의 스토어를 블록 뒤의 로드와 스토어에 대해 순서 - 맞춥니다. 이건 smp_mb() 보다 완화된 것임을 기억하세요! 많은 아키텍쳐에서 - smp_mb__before_spinlock() 은 사실 아무일도 하지 않습니다. + 완료될 수 있습니다. (2) RELEASE 오퍼레이션의 영향: diff --git a/Documentation/translations/zh_CN/HOWTO b/Documentation/translations/zh_CN/HOWTO index 11be075ba5fa..5f6d09edc9ac 100644 --- a/Documentation/translations/zh_CN/HOWTO +++ b/Documentation/translations/zh_CN/HOWTO @@ -149,9 +149,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与 核源码的主目录中使用以下不同命令将会分别生成PDF、Postscript、HTML和手册 页等不同格式的文档： make pdfdocs - make psdocs make htmldocs - make mandocs 如何成为内核开发者 diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt index b2f60ca8b60c..b3ce12643553 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt @@ -83,6 +83,11 @@ Groups: Bits for undefined preemption levels are RAZ/WI. + Note that this differs from a CPU's view of the APRs on hardware in which + a GIC without the security extensions expose group 0 and group 1 active + priorities in separate register groups, whereas we show a combined view + similar to GICv2's GICH_APR. + For historical reasons and to provide ABI compatibility with userspace we export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a word, meaning that userspace must always diff --git a/Documentation/virtual/kvm/devices/vm.txt b/Documentation/virtual/kvm/devices/vm.txt index 903fc926860b..95ca68d663a4 100644 --- a/Documentation/virtual/kvm/devices/vm.txt +++ b/Documentation/virtual/kvm/devices/vm.txt @@ -176,7 +176,8 @@ Architectures: s390 3.1. ATTRIBUTE: KVM_S390_VM_TOD_HIGH -Allows user space to set/get the TOD clock extension (u8). +Allows user space to set/get the TOD clock extension (u8) (superseded by +KVM_S390_VM_TOD_EXT). Parameters: address of a buffer in user space to store the data (u8) to Returns: -EFAULT if the given address is not accessible from kernel space @@ -190,6 +191,17 @@ the POP (u64). Parameters: address of a buffer in user space to store the data (u64) to Returns: -EFAULT if the given address is not accessible from kernel space +3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT +Allows user space to set/get bits 0-63 of the TOD clock register as defined in +the POP (u64). If the guest CPU model supports the TOD clock extension (u8), it +also allows user space to get/set it. If the guest CPU model does not support +it, it is stored as 0 and not allowed to be set to a value != 0. + +Parameters: address of a buffer in user space to store the data + (kvm_s390_vm_tod_clock) to +Returns: -EFAULT if the given address is not accessible from kernel space + -EINVAL if setting the TOD clock extension to != 0 is not supported + 4. GROUP: KVM_S390_VM_CRYPTO Architectures: s390 diff --git a/Documentation/vm/numa b/Documentation/vm/numa index a08f71647714..a31b85b9bb88 100644 --- a/Documentation/vm/numa +++ b/Documentation/vm/numa @@ -79,11 +79,8 @@ memory, Linux must decide whether to order the zonelists such that allocations fall back to the same zone type on a different node, or to a different zone type on the same node. This is an important consideration because some zones, such as DMA or DMA32, represent relatively scarce resources. Linux chooses -a default zonelist order based on the sizes of the various zone types relative -to the total memory of the node and the total memory of the system. The -default zonelist order may be overridden using the numa_zonelist_order kernel -boot parameter or sysctl. [see Documentation/admin-guide/kernel-parameters.rst and -Documentation/sysctl/vm.txt] +a default Node ordered zonelist. This means it tries to fallback to other zones +from the same node before using remote nodes which are ordered by NUMA distance. By default, Linux will attempt to satisfy memory allocation requests from the node to which the CPU that executes the request is assigned. Specifically, diff --git a/Documentation/vm/swap_numa.txt b/Documentation/vm/swap_numa.txt new file mode 100644 index 000000000000..d5960c9124f5 --- /dev/null +++ b/Documentation/vm/swap_numa.txt @@ -0,0 +1,69 @@ +Automatically bind swap device to numa node +------------------------------------------- + +If the system has more than one swap device and swap device has the node +information, we can make use of this information to decide which swap +device to use in get_swap_pages() to get better performance. + + +How to use this feature +----------------------- + +Swap device has priority and that decides the order of it to be used. To make +use of automatically binding, there is no need to manipulate priority settings +for swap devices. e.g. on a 2 node machine, assume 2 swap devices swapA and +swapB, with swapA attached to node 0 and swapB attached to node 1, are going +to be swapped on. Simply swapping them on by doing: +# swapon /dev/swapA +# swapon /dev/swapB + +Then node 0 will use the two swap devices in the order of swapA then swapB and +node 1 will use the two swap devices in the order of swapB then swapA. Note +that the order of them being swapped on doesn't matter. + +A more complex example on a 4 node machine. Assume 6 swap devices are going to +be swapped on: swapA and swapB are attached to node 0, swapC is attached to +node 1, swapD and swapE are attached to node 2 and swapF is attached to node3. +The way to swap them on is the same as above: +# swapon /dev/swapA +# swapon /dev/swapB +# swapon /dev/swapC +# swapon /dev/swapD +# swapon /dev/swapE +# swapon /dev/swapF + +Then node 0 will use them in the order of: +swapA/swapB -> swapC -> swapD -> swapE -> swapF +swapA and swapB will be used in a round robin mode before any other swap device. + +node 1 will use them in the order of: +swapC -> swapA -> swapB -> swapD -> swapE -> swapF + +node 2 will use them in the order of: +swapD/swapE -> swapA -> swapB -> swapC -> swapF +Similaly, swapD and swapE will be used in a round robin mode before any +other swap devices. + +node 3 will use them in the order of: +swapF -> swapA -> swapB -> swapC -> swapD -> swapE + + +Implementation details +---------------------- + +The current code uses a priority based list, swap_avail_list, to decide +which swap device to use and if multiple swap devices share the same +priority, they are used round robin. This change here replaces the single +global swap_avail_list with a per-numa-node list, i.e. for each numa node, +it sees its own priority based list of available swap devices. Swap +device's priority can be promoted on its matching node's swap_avail_list. + +The current swap device's priority is set as: user can set a >=0 value, +or the system will pick one starting from -1 then downwards. The priority +value in the swap_avail_list is the negated value of the swap device's +due to plist being sorted from low to high. The new policy doesn't change +the semantics for priority >=0 cases, the previous starting from -1 then +downwards now becomes starting from -2 then downwards and -1 is reserved +as the promoted value. So if multiple swap devices are attached to the same +node, they will all be promoted to priority -1 on that node's plist and will +be used round robin before any other swap devices. diff --git a/Documentation/x86/amd-memory-encryption.txt b/Documentation/x86/amd-memory-encryption.txt new file mode 100644 index 000000000000..f512ab718541 --- /dev/null +++ b/Documentation/x86/amd-memory-encryption.txt @@ -0,0 +1,68 @@ +Secure Memory Encryption (SME) is a feature found on AMD processors. + +SME provides the ability to mark individual pages of memory as encrypted using +the standard x86 page tables. A page that is marked encrypted will be +automatically decrypted when read from DRAM and encrypted when written to +DRAM. SME can therefore be used to protect the contents of DRAM from physical +attacks on the system. + +A page is encrypted when a page table entry has the encryption bit set (see +below on how to determine its position). The encryption bit can also be +specified in the cr3 register, allowing the PGD table to be encrypted. Each +successive level of page tables can also be encrypted by setting the encryption +bit in the page table entry that points to the next table. This allows the full +page table hierarchy to be encrypted. Note, this means that just because the +encryption bit is set in cr3, doesn't imply the full hierarchy is encyrpted. +Each page table entry in the hierarchy needs to have the encryption bit set to +achieve that. So, theoretically, you could have the encryption bit set in cr3 +so that the PGD is encrypted, but not set the encryption bit in the PGD entry +for a PUD which results in the PUD pointed to by that entry to not be +encrypted. + +Support for SME can be determined through the CPUID instruction. The CPUID +function 0x8000001f reports information related to SME: + + 0x8000001f[eax]: + Bit[0] indicates support for SME + 0x8000001f[ebx]: + Bits[5:0] pagetable bit number used to activate memory + encryption + Bits[11:6] reduction in physical address space, in bits, when + memory encryption is enabled (this only affects + system physical addresses, not guest physical + addresses) + +If support for SME is present, MSR 0xc00100010 (MSR_K8_SYSCFG) can be used to +determine if SME is enabled and/or to enable memory encryption: + + 0xc0010010: + Bit[23] 0 = memory encryption features are disabled + 1 = memory encryption features are enabled + +Linux relies on BIOS to set this bit if BIOS has determined that the reduction +in the physical address space as a result of enabling memory encryption (see +CPUID information above) will not conflict with the address space resource +requirements for the system. If this bit is not set upon Linux startup then +Linux itself will not set it and memory encryption will not be possible. + +The state of SME in the Linux kernel can be documented as follows: + - Supported: + The CPU supports SME (determined through CPUID instruction). + + - Enabled: + Supported and bit 23 of MSR_K8_SYSCFG is set. + + - Active: + Supported, Enabled and the Linux kernel is actively applying + the encryption bit to page table entries (the SME mask in the + kernel is non-zero). + +SME can also be enabled and activated in the BIOS. If SME is enabled and +activated in the BIOS, then all memory accesses will be encrypted and it will +not be necessary to activate the Linux memory encryption support. If the BIOS +merely enables SME (sets bit 23 of the MSR_K8_SYSCFG), then Linux can activate +memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or +by supplying mem_encrypt=on on the kernel command line. However, if BIOS does +not enable SME, then Linux will not be able to activate memory encryption, even +if configured to do so by default or the mem_encrypt=on command line parameter +is specified. diff --git a/Documentation/x86/early-microcode.txt b/Documentation/x86/early-microcode.txt deleted file mode 100644 index 07749e7f3d50..000000000000 --- a/Documentation/x86/early-microcode.txt +++ /dev/null @@ -1,70 +0,0 @@ -Early load microcode -==================== -By Fenghua Yu <fenghua.yu@intel.com> - -Kernel can update microcode in early phase of boot time. Loading microcode early -can fix CPU issues before they are observed during kernel boot time. - -Microcode is stored in an initrd file. The microcode is read from the initrd -file and loaded to CPUs during boot time. - -The format of the combined initrd image is microcode in cpio format followed by -the initrd image (maybe compressed). Kernel parses the combined initrd image -during boot time. The microcode file in cpio name space is: -on Intel: kernel/x86/microcode/GenuineIntel.bin -on AMD : kernel/x86/microcode/AuthenticAMD.bin - -During BSP boot (before SMP starts), if the kernel finds the microcode file in -the initrd file, it parses the microcode and saves matching microcode in memory. -If matching microcode is found, it will be uploaded in BSP and later on in all -APs. - -The cached microcode patch is applied when CPUs resume from a sleep state. - -There are two legacy user space interfaces to load microcode, either through -/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file -in sysfs. - -In addition to these two legacy methods, the early loading method described -here is the third method with which microcode can be uploaded to a system's -CPUs. - -The following example script shows how to generate a new combined initrd file in -/boot/initrd-3.5.0.ucode.img with original microcode microcode.bin and -original initrd image /boot/initrd-3.5.0.img. - -mkdir initrd -cd initrd -mkdir -p kernel/x86/microcode -cp ../microcode.bin kernel/x86/microcode/GenuineIntel.bin (or AuthenticAMD.bin) -find . | cpio -o -H newc >../ucode.cpio -cd .. -cat ucode.cpio /boot/initrd-3.5.0.img >/boot/initrd-3.5.0.ucode.img - -Builtin microcode -================= - -We can also load builtin microcode supplied through the regular firmware -builtin method CONFIG_FIRMWARE_IN_KERNEL. Only 64-bit is currently -supported. - -Here's an example: - -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin" -CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" - -This basically means, you have the following tree structure locally: - -/lib/firmware/ -|-- amd-ucode -... -| |-- microcode_amd_fam15h.bin -... -|-- intel-ucode -... -| |-- 06-3a-09 -... - -so that the build system can find those files and integrate them into -the final kernel image. The early loader finds them and applies them. diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt index c491a1b82de2..4d8848e4e224 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/intel_rdt_ui.txt @@ -6,8 +6,8 @@ Fenghua Yu <fenghua.yu@intel.com> Tony Luck <tony.luck@intel.com> Vikas Shivappa <vikas.shivappa@intel.com> -This feature is enabled by the CONFIG_INTEL_RDT_A Kconfig and the -X86 /proc/cpuinfo flag bits "rdt", "cat_l3" and "cdp_l3". +This feature is enabled by the CONFIG_INTEL_RDT Kconfig and the +X86 /proc/cpuinfo flag bits "rdt", "cqm", "cat_l3" and "cdp_l3". To use the feature mount the file system: @@ -17,6 +17,13 @@ mount options are: "cdp": Enable code/data prioritization in L3 cache allocations. +RDT features are orthogonal. A particular system may support only +monitoring, only control, or both monitoring and control. + +The mount succeeds if either of allocation or monitoring is present, but +only those files and directories supported by the system will be created. +For more details on the behavior of the interface during monitoring +and allocation, see the "Resource alloc and monitor groups" section. Info directory -------------- @@ -24,7 +31,12 @@ Info directory The 'info' directory contains information about the enabled resources. Each resource has its own subdirectory. The subdirectory names reflect the resource names. -Cache resource(L3/L2) subdirectory contains the following files: + +Each subdirectory contains the following files with respect to +allocation: + +Cache resource(L3/L2) subdirectory contains the following files +related to allocation: "num_closids": The number of CLOSIDs which are valid for this resource. The kernel uses the smallest number of @@ -36,7 +48,15 @@ Cache resource(L3/L2) subdirectory contains the following files: "min_cbm_bits": The minimum number of consecutive bits which must be set when writing a mask. -Memory bandwitdh(MB) subdirectory contains the following files: +"shareable_bits": Bitmask of shareable resource with other executing + entities (e.g. I/O). User can use this when + setting up exclusive cache partitions. Note that + some platforms support devices that have their + own settings for cache use which can over-ride + these bits. + +Memory bandwitdh(MB) subdirectory contains the following files +with respect to allocation: "min_bandwidth": The minimum memory bandwidth percentage which user can request. @@ -52,48 +72,152 @@ Memory bandwitdh(MB) subdirectory contains the following files: non-linear. This field is purely informational only. -Resource groups ---------------- +If RDT monitoring is available there will be an "L3_MON" directory +with the following files: + +"num_rmids": The number of RMIDs available. This is the + upper bound for how many "CTRL_MON" + "MON" + groups can be created. + +"mon_features": Lists the monitoring events if + monitoring is enabled for the resource. + +"max_threshold_occupancy": + Read/write file provides the largest value (in + bytes) at which a previously used LLC_occupancy + counter can be considered for re-use. + + +Resource alloc and monitor groups +--------------------------------- + Resource groups are represented as directories in the resctrl file -system. The default group is the root directory. Other groups may be -created as desired by the system administrator using the "mkdir(1)" -command, and removed using "rmdir(1)". +system. The default group is the root directory which, immediately +after mounting, owns all the tasks and cpus in the system and can make +full use of all resources. + +On a system with RDT control features additional directories can be +created in the root directory that specify different amounts of each +resource (see "schemata" below). The root and these additional top level +directories are referred to as "CTRL_MON" groups below. + +On a system with RDT monitoring the root directory and other top level +directories contain a directory named "mon_groups" in which additional +directories can be created to monitor subsets of tasks in the CTRL_MON +group that is their ancestor. These are called "MON" groups in the rest +of this document. + +Removing a directory will move all tasks and cpus owned by the group it +represents to the parent. Removing one of the created CTRL_MON groups +will automatically remove all MON groups below it. + +All groups contain the following files: + +"tasks": + Reading this file shows the list of all tasks that belong to + this group. Writing a task id to the file will add a task to the + group. If the group is a CTRL_MON group the task is removed from + whichever previous CTRL_MON group owned the task and also from + any MON group that owned the task. If the group is a MON group, + then the task must already belong to the CTRL_MON parent of this + group. The task is removed from any previous MON group. + + +"cpus": + Reading this file shows a bitmask of the logical CPUs owned by + this group. Writing a mask to this file will add and remove + CPUs to/from this group. As with the tasks file a hierarchy is + maintained where MON groups may only include CPUs owned by the + parent CTRL_MON group. + -There are three files associated with each group: +"cpus_list": + Just like "cpus", only using ranges of CPUs instead of bitmasks. -"tasks": A list of tasks that belongs to this group. Tasks can be - added to a group by writing the task ID to the "tasks" file - (which will automatically remove them from the previous - group to which they belonged). New tasks created by fork(2) - and clone(2) are added to the same group as their parent. - If a pid is not in any sub partition, it is in root partition - (i.e. default partition). -"cpus": A bitmask of logical CPUs assigned to this group. Writing - a new mask can add/remove CPUs from this group. Added CPUs - are removed from their previous group. Removed ones are - given to the default (root) group. You cannot remove CPUs - from the default group. +When control is enabled all CTRL_MON groups will also contain: -"cpus_list": One or more CPU ranges of logical CPUs assigned to this - group. Same rules apply like for the "cpus" file. +"schemata": + A list of all the resources available to this group. + Each resource has its own line and format - see below for details. -"schemata": A list of all the resources available to this group. - Each resource has its own line and format - see below for - details. +When monitoring is enabled all MON groups will also contain: -When a task is running the following rules define which resources -are available to it: +"mon_data": + This contains a set of files organized by L3 domain and by + RDT event. E.g. on a system with two L3 domains there will + be subdirectories "mon_L3_00" and "mon_L3_01". Each of these + directories have one file per event (e.g. "llc_occupancy", + "mbm_total_bytes", and "mbm_local_bytes"). In a MON group these + files provide a read out of the current value of the event for + all tasks in the group. In CTRL_MON groups these files provide + the sum for all tasks in the CTRL_MON group and all tasks in + MON groups. Please see example section for more details on usage. + +Resource allocation rules +------------------------- +When a task is running the following rules define which resources are +available to it: 1) If the task is a member of a non-default group, then the schemata -for that group is used. + for that group is used. 2) Else if the task belongs to the default group, but is running on a -CPU that is assigned to some specific group, then the schemata for -the CPU's group is used. + CPU that is assigned to some specific group, then the schemata for the + CPU's group is used. 3) Otherwise the schemata for the default group is used. +Resource monitoring rules +------------------------- +1) If a task is a member of a MON group, or non-default CTRL_MON group + then RDT events for the task will be reported in that group. + +2) If a task is a member of the default CTRL_MON group, but is running + on a CPU that is assigned to some specific group, then the RDT events + for the task will be reported in that group. + +3) Otherwise RDT events for the task will be reported in the root level + "mon_data" group. + + +Notes on cache occupancy monitoring and control +----------------------------------------------- +When moving a task from one group to another you should remember that +this only affects *new* cache allocations by the task. E.g. you may have +a task in a monitor group showing 3 MB of cache occupancy. If you move +to a new group and immediately check the occupancy of the old and new +groups you will likely see that the old group is still showing 3 MB and +the new group zero. When the task accesses locations still in cache from +before the move, the h/w does not update any counters. On a busy system +you will likely see the occupancy in the old group go down as cache lines +are evicted and re-used while the occupancy in the new group rises as +the task accesses memory and loads into the cache are counted based on +membership in the new group. + +The same applies to cache allocation control. Moving a task to a group +with a smaller cache partition will not evict any cache lines. The +process may continue to use them from the old partition. + +Hardware uses CLOSid(Class of service ID) and an RMID(Resource monitoring ID) +to identify a control group and a monitoring group respectively. Each of +the resource groups are mapped to these IDs based on the kind of group. The +number of CLOSid and RMID are limited by the hardware and hence the creation of +a "CTRL_MON" directory may fail if we run out of either CLOSID or RMID +and creation of "MON" group may fail if we run out of RMIDs. + +max_threshold_occupancy - generic concepts +------------------------------------------ + +Note that an RMID once freed may not be immediately available for use as +the RMID is still tagged the cache lines of the previous user of RMID. +Hence such RMIDs are placed on limbo list and checked back if the cache +occupancy has gone down. If there is a time when system has a lot of +limbo RMIDs but which are not ready to be used, user may see an -EBUSY +during mkdir. + +max_threshold_occupancy is a user configurable value to determine the +occupancy at which an RMID can be freed. Schemata files - general concepts --------------------------------- @@ -143,22 +267,22 @@ SKUs. Using a high bandwidth and a low bandwidth setting on two threads sharing a core will result in both threads being throttled to use the low bandwidth. -L3 details (code and data prioritization disabled) --------------------------------------------------- +L3 schemata file details (code and data prioritization disabled) +---------------------------------------------------------------- With CDP disabled the L3 schemata format is: L3:<cache_id0>=<cbm>;<cache_id1>=<cbm>;... -L3 details (CDP enabled via mount option to resctrl) ----------------------------------------------------- +L3 schemata file details (CDP enabled via mount option to resctrl) +------------------------------------------------------------------ When CDP is enabled L3 control is split into two separate resources so you can specify independent masks for code and data like this: L3data:<cache_id0>=<cbm>;<cache_id1>=<cbm>;... L3code:<cache_id0>=<cbm>;<cache_id1>=<cbm>;... -L2 details ----------- +L2 schemata file details +------------------------ L2 cache does not support code and data prioritization, so the schemata format is always: @@ -185,6 +309,8 @@ L3CODE:0=fffff;1=fffff;2=fffff;3=fffff L3DATA:0=fffff;1=fffff;2=3c0;3=fffff L3CODE:0=fffff;1=fffff;2=fffff;3=fffff +Examples for RDT allocation usage: + Example 1 --------- On a two socket machine (one L3 cache per socket) with just four bits @@ -410,3 +536,124 @@ void main(void) /* code to read and write directory contents */ resctrl_release_lock(fd); } + +Examples for RDT Monitoring along with allocation usage: + +Reading monitored data +---------------------- +Reading an event file (for ex: mon_data/mon_L3_00/llc_occupancy) would +show the current snapshot of LLC occupancy of the corresponding MON +group or CTRL_MON group. + + +Example 1 (Monitor CTRL_MON group and subset of tasks in CTRL_MON group) +--------- +On a two socket machine (one L3 cache per socket) with just four bits +for cache bit masks + +# mount -t resctrl resctrl /sys/fs/resctrl +# cd /sys/fs/resctrl +# mkdir p0 p1 +# echo "L3:0=3;1=c" > /sys/fs/resctrl/p0/schemata +# echo "L3:0=3;1=3" > /sys/fs/resctrl/p1/schemata +# echo 5678 > p1/tasks +# echo 5679 > p1/tasks + +The default resource group is unmodified, so we have access to all parts +of all caches (its schemata file reads "L3:0=f;1=f"). + +Tasks that are under the control of group "p0" may only allocate from the +"lower" 50% on cache ID 0, and the "upper" 50% of cache ID 1. +Tasks in group "p1" use the "lower" 50% of cache on both sockets. + +Create monitor groups and assign a subset of tasks to each monitor group. + +# cd /sys/fs/resctrl/p1/mon_groups +# mkdir m11 m12 +# echo 5678 > m11/tasks +# echo 5679 > m12/tasks + +fetch data (data shown in bytes) + +# cat m11/mon_data/mon_L3_00/llc_occupancy +16234000 +# cat m11/mon_data/mon_L3_01/llc_occupancy +14789000 +# cat m12/mon_data/mon_L3_00/llc_occupancy +16789000 + +The parent ctrl_mon group shows the aggregated data. + +# cat /sys/fs/resctrl/p1/mon_data/mon_l3_00/llc_occupancy +31234000 + +Example 2 (Monitor a task from its creation) +--------- +On a two socket machine (one L3 cache per socket) + +# mount -t resctrl resctrl /sys/fs/resctrl +# cd /sys/fs/resctrl +# mkdir p0 p1 + +An RMID is allocated to the group once its created and hence the <cmd> +below is monitored from its creation. + +# echo $$ > /sys/fs/resctrl/p1/tasks +# <cmd> + +Fetch the data + +# cat /sys/fs/resctrl/p1/mon_data/mon_l3_00/llc_occupancy +31789000 + +Example 3 (Monitor without CAT support or before creating CAT groups) +--------- + +Assume a system like HSW has only CQM and no CAT support. In this case +the resctrl will still mount but cannot create CTRL_MON directories. +But user can create different MON groups within the root group thereby +able to monitor all tasks including kernel threads. + +This can also be used to profile jobs cache size footprint before being +able to allocate them to different allocation groups. + +# mount -t resctrl resctrl /sys/fs/resctrl +# cd /sys/fs/resctrl +# mkdir mon_groups/m01 +# mkdir mon_groups/m02 + +# echo 3478 > /sys/fs/resctrl/mon_groups/m01/tasks +# echo 2467 > /sys/fs/resctrl/mon_groups/m02/tasks + +Monitor the groups separately and also get per domain data. From the +below its apparent that the tasks are mostly doing work on +domain(socket) 0. + +# cat /sys/fs/resctrl/mon_groups/m01/mon_L3_00/llc_occupancy +31234000 +# cat /sys/fs/resctrl/mon_groups/m01/mon_L3_01/llc_occupancy +34555 +# cat /sys/fs/resctrl/mon_groups/m02/mon_L3_00/llc_occupancy +31234000 +# cat /sys/fs/resctrl/mon_groups/m02/mon_L3_01/llc_occupancy +32789 + + +Example 4 (Monitor real time tasks) +----------------------------------- + +A single socket system which has real time tasks running on cores 4-7 +and non real time tasks on other cpus. We want to monitor the cache +occupancy of the real time threads on these cores. + +# mount -t resctrl resctrl /sys/fs/resctrl +# cd /sys/fs/resctrl +# mkdir p1 + +Move the cpus 4-7 over to p1 +# echo f0 > p0/cpus + +View the llc occupancy snapshot + +# cat /sys/fs/resctrl/p1/mon_data/mon_L3_00/llc_occupancy +11234000 diff --git a/Documentation/x86/microcode.txt b/Documentation/x86/microcode.txt new file mode 100644 index 000000000000..f57e1b45e628 --- /dev/null +++ b/Documentation/x86/microcode.txt @@ -0,0 +1,137 @@ + The Linux Microcode Loader + +Authors: Fenghua Yu <fenghua.yu@intel.com> + Borislav Petkov <bp@suse.de> + +The kernel has a x86 microcode loading facility which is supposed to +provide microcode loading methods in the OS. Potential use cases are +updating the microcode on platforms beyond the OEM End-Of-Life support, +and updating the microcode on long-running systems without rebooting. + +The loader supports three loading methods: + +1. Early load microcode +======================= + +The kernel can update microcode very early during boot. Loading +microcode early can fix CPU issues before they are observed during +kernel boot time. + +The microcode is stored in an initrd file. During boot, it is read from +it and loaded into the CPU cores. + +The format of the combined initrd image is microcode in (uncompressed) +cpio format followed by the (possibly compressed) initrd image. The +loader parses the combined initrd image during boot. + +The microcode files in cpio name space are: + +on Intel: kernel/x86/microcode/GenuineIntel.bin +on AMD : kernel/x86/microcode/AuthenticAMD.bin + +During BSP (BootStrapping Processor) boot (pre-SMP), the kernel +scans the microcode file in the initrd. If microcode matching the +CPU is found, it will be applied in the BSP and later on in all APs +(Application Processors). + +The loader also saves the matching microcode for the CPU in memory. +Thus, the cached microcode patch is applied when CPUs resume from a +sleep state. + +Here's a crude example how to prepare an initrd with microcode (this is +normally done automatically by the distribution, when recreating the +initrd, so you don't really have to do it yourself. It is documented +here for future reference only). + +--- + #!/bin/bash + + if [ -z "$1" ]; then + echo "You need to supply an initrd file" + exit 1 + fi + + INITRD="$1" + + DSTDIR=kernel/x86/microcode + TMPDIR=/tmp/initrd + + rm -rf $TMPDIR + + mkdir $TMPDIR + cd $TMPDIR + mkdir -p $DSTDIR + + if [ -d /lib/firmware/amd-ucode ]; then + cat /lib/firmware/amd-ucode/microcode_amd*.bin > $DSTDIR/AuthenticAMD.bin + fi + + if [ -d /lib/firmware/intel-ucode ]; then + cat /lib/firmware/intel-ucode/* > $DSTDIR/GenuineIntel.bin + fi + + find . | cpio -o -H newc >../ucode.cpio + cd .. + mv $INITRD $INITRD.orig + cat ucode.cpio $INITRD.orig > $INITRD + + rm -rf $TMPDIR +--- + +The system needs to have the microcode packages installed into +/lib/firmware or you need to fixup the paths above if yours are +somewhere else and/or you've downloaded them directly from the processor +vendor's site. + +2. Late loading +=============== + +There are two legacy user space interfaces to load microcode, either through +/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file +in sysfs. + +The /dev/cpu/microcode method is deprecated because it needs a special +userspace tool for that. + +The easier method is simply installing the microcode packages your distro +supplies and running: + +# echo 1 > /sys/devices/system/cpu/microcode/reload + +as root. + +The loading mechanism looks for microcode blobs in +/lib/firmware/{intel-ucode,amd-ucode}. The default distro installation +packages already put them there. + +3. Builtin microcode +==================== + +The loader supports also loading of a builtin microcode supplied through +the regular firmware builtin method CONFIG_FIRMWARE_IN_KERNEL. Only +64-bit is currently supported. + +Here's an example: + +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin" +CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" + +This basically means, you have the following tree structure locally: + +/lib/firmware/ +|-- amd-ucode +... +| |-- microcode_amd_fam15h.bin +... +|-- intel-ucode +... +| |-- 06-3a-09 +... + +so that the build system can find those files and integrate them into +the final kernel image. The early loader finds them and applies them. + +Needless to say, this method is not the most flexible one because it +requires rebuilding the kernel each time updated microcode from the CPU +vendor is available. diff --git a/Documentation/x86/orc-unwinder.txt b/Documentation/x86/orc-unwinder.txt new file mode 100644 index 000000000000..af0c9a4c65a6 --- /dev/null +++ b/Documentation/x86/orc-unwinder.txt @@ -0,0 +1,179 @@ +ORC unwinder +============ + +Overview +-------- + +The kernel CONFIG_ORC_UNWINDER option enables the ORC unwinder, which is +similar in concept to a DWARF unwinder. The difference is that the +format of the ORC data is much simpler than DWARF, which in turn allows +the ORC unwinder to be much simpler and faster. + +The ORC data consists of unwind tables which are generated by objtool. +They contain out-of-band data which is used by the in-kernel ORC +unwinder. Objtool generates the ORC data by first doing compile-time +stack metadata validation (CONFIG_STACK_VALIDATION). After analyzing +all the code paths of a .o file, it determines information about the +stack state at each instruction address in the file and outputs that +information to the .orc_unwind and .orc_unwind_ip sections. + +The per-object ORC sections are combined at link time and are sorted and +post-processed at boot time. The unwinder uses the resulting data to +correlate instruction addresses with their stack states at run time. + + +ORC vs frame pointers +--------------------- + +With frame pointers enabled, GCC adds instrumentation code to every +function in the kernel. The kernel's .text size increases by about +3.2%, resulting in a broad kernel-wide slowdown. Measurements by Mel +Gorman [1] have shown a slowdown of 5-10% for some workloads. + +In contrast, the ORC unwinder has no effect on text size or runtime +performance, because the debuginfo is out of band. So if you disable +frame pointers and enable the ORC unwinder, you get a nice performance +improvement across the board, and still have reliable stack traces. + +Ingo Molnar says: + + "Note that it's not just a performance improvement, but also an + instruction cache locality improvement: 3.2% .text savings almost + directly transform into a similarly sized reduction in cache + footprint. That can transform to even higher speedups for workloads + whose cache locality is borderline." + +Another benefit of ORC compared to frame pointers is that it can +reliably unwind across interrupts and exceptions. Frame pointer based +unwinds can sometimes skip the caller of the interrupted function, if it +was a leaf function or if the interrupt hit before the frame pointer was +saved. + +The main disadvantage of the ORC unwinder compared to frame pointers is +that it needs more memory to store the ORC unwind tables: roughly 2-4MB +depending on the kernel config. + + +ORC vs DWARF +------------ + +ORC debuginfo's advantage over DWARF itself is that it's much simpler. +It gets rid of the complex DWARF CFI state machine and also gets rid of +the tracking of unnecessary registers. This allows the unwinder to be +much simpler, meaning fewer bugs, which is especially important for +mission critical oops code. + +The simpler debuginfo format also enables the unwinder to be much faster +than DWARF, which is important for perf and lockdep. In a basic +performance test by Jiri Slaby [2], the ORC unwinder was about 20x +faster than an out-of-tree DWARF unwinder. (Note: That measurement was +taken before some performance tweaks were added, which doubled +performance, so the speedup over DWARF may be closer to 40x.) + +The ORC data format does have a few downsides compared to DWARF. ORC +unwind tables take up ~50% more RAM (+1.3MB on an x86 defconfig kernel) +than DWARF-based eh_frame tables. + +Another potential downside is that, as GCC evolves, it's conceivable +that the ORC data may end up being *too* simple to describe the state of +the stack for certain optimizations. But IMO this is unlikely because +GCC saves the frame pointer for any unusual stack adjustments it does, +so I suspect we'll really only ever need to keep track of the stack +pointer and the frame pointer between call frames. But even if we do +end up having to track all the registers DWARF tracks, at least we will +still be able to control the format, e.g. no complex state machines. + + +ORC unwind table generation +--------------------------- + +The ORC data is generated by objtool. With the existing compile-time +stack metadata validation feature, objtool already follows all code +paths, and so it already has all the information it needs to be able to +generate ORC data from scratch. So it's an easy step to go from stack +validation to ORC data generation. + +It should be possible to instead generate the ORC data with a simple +tool which converts DWARF to ORC data. However, such a solution would +be incomplete due to the kernel's extensive use of asm, inline asm, and +special sections like exception tables. + +That could be rectified by manually annotating those special code paths +using GNU assembler .cfi annotations in .S files, and homegrown +annotations for inline asm in .c files. But asm annotations were tried +in the past and were found to be unmaintainable. They were often +incorrect/incomplete and made the code harder to read and keep updated. +And based on looking at glibc code, annotating inline asm in .c files +might be even worse. + +Objtool still needs a few annotations, but only in code which does +unusual things to the stack like entry code. And even then, far fewer +annotations are needed than what DWARF would need, so they're much more +maintainable than DWARF CFI annotations. + +So the advantages of using objtool to generate ORC data are that it +gives more accurate debuginfo, with very few annotations. It also +insulates the kernel from toolchain bugs which can be very painful to +deal with in the kernel since we often have to workaround issues in +older versions of the toolchain for years. + +The downside is that the unwinder now becomes dependent on objtool's +ability to reverse engineer GCC code flow. If GCC optimizations become +too complicated for objtool to follow, the ORC data generation might +stop working or become incomplete. (It's worth noting that livepatch +already has such a dependency on objtool's ability to follow GCC code +flow.) + +If newer versions of GCC come up with some optimizations which break +objtool, we may need to revisit the current implementation. Some +possible solutions would be asking GCC to make the optimizations more +palatable, or having objtool use DWARF as an additional input, or +creating a GCC plugin to assist objtool with its analysis. But for now, +objtool follows GCC code quite well. + + +Unwinder implementation details +------------------------------- + +Objtool generates the ORC data by integrating with the compile-time +stack metadata validation feature, which is described in detail in +tools/objtool/Documentation/stack-validation.txt. After analyzing all +the code paths of a .o file, it creates an array of orc_entry structs, +and a parallel array of instruction addresses associated with those +structs, and writes them to the .orc_unwind and .orc_unwind_ip sections +respectively. + +The ORC data is split into the two arrays for performance reasons, to +make the searchable part of the data (.orc_unwind_ip) more compact. The +arrays are sorted in parallel at boot time. + +Performance is further improved by the use of a fast lookup table which +is created at runtime. The fast lookup table associates a given address +with a range of indices for the .orc_unwind table, so that only a small +subset of the table needs to be searched. + + +Etymology +--------- + +Orcs, fearsome creatures of medieval folklore, are the Dwarves' natural +enemies. Similarly, the ORC unwinder was created in opposition to the +complexity and slowness of DWARF. + +"Although Orcs rarely consider multiple solutions to a problem, they do +excel at getting things done because they are creatures of action, not +thought." [3] Similarly, unlike the esoteric DWARF unwinder, the +veracious ORC unwinder wastes no time or siloconic effort decoding +variable-length zero-extended unsigned-integer byte-coded +state-machine-based debug information entries. + +Similar to how Orcs frequently unravel the well-intentioned plans of +their adversaries, the ORC unwinder frequently unravels stacks with +brutal, unyielding efficiency. + +ORC stands for Oops Rewind Capability. + + +[1] https://lkml.kernel.org/r/20170602104048.jkkzssljsompjdwy@suse.de +[2] https://lkml.kernel.org/r/d2ca5435-6386-29b8-db87-7f227c2b713a@suse.cz +[3] http://dustin.wikidot.com/half-orcs-and-orcs diff --git a/Documentation/x86/protection-keys.txt b/Documentation/x86/protection-keys.txt index b64304540821..fa46dcb347bc 100644 --- a/Documentation/x86/protection-keys.txt +++ b/Documentation/x86/protection-keys.txt @@ -34,7 +34,7 @@ with a key. In this example WRPKRU is wrapped by a C function called pkey_set(). int real_prot = PROT_READ|PROT_WRITE; - pkey = pkey_alloc(0, PKEY_DENY_WRITE); + pkey = pkey_alloc(0, PKEY_DISABLE_WRITE); ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey); ... application runs here @@ -42,9 +42,9 @@ called pkey_set(). Now, if the application needs to update the data at 'ptr', it can gain access, do the update, then remove its write access: - pkey_set(pkey, 0); // clear PKEY_DENY_WRITE + pkey_set(pkey, 0); // clear PKEY_DISABLE_WRITE *ptr = foo; // assign something - pkey_set(pkey, PKEY_DENY_WRITE); // set PKEY_DENY_WRITE again + pkey_set(pkey, PKEY_DISABLE_WRITE); // set PKEY_DISABLE_WRITE again Now when it frees the memory, it will also free the pkey since it is no longer in use: diff --git a/Documentation/x86/x86_64/5level-paging.txt b/Documentation/x86/x86_64/5level-paging.txt new file mode 100644 index 000000000000..087251a0d99c --- /dev/null +++ b/Documentation/x86/x86_64/5level-paging.txt @@ -0,0 +1,64 @@ +== Overview == + +Original x86-64 was limited by 4-level paing to 256 TiB of virtual address +space and 64 TiB of physical address space. We are already bumping into +this limit: some vendors offers servers with 64 TiB of memory today. + +To overcome the limitation upcoming hardware will introduce support for +5-level paging. It is a straight-forward extension of the current page +table structure adding one more layer of translation. + +It bumps the limits to 128 PiB of virtual address space and 4 PiB of +physical address space. This "ought to be enough for anybody" ©. + +QEMU 2.9 and later support 5-level paging. + +Virtual memory layout for 5-level paging is described in +Documentation/x86/x86_64/mm.txt + +== Enabling 5-level paging == + +CONFIG_X86_5LEVEL=y enables the feature. + +So far, a kernel compiled with the option enabled will be able to boot +only on machines that supports the feature -- see for 'la57' flag in +/proc/cpuinfo. + +The plan is to implement boot-time switching between 4- and 5-level paging +in the future. + +== User-space and large virtual address space == + +On x86, 5-level paging enables 56-bit userspace virtual address space. +Not all user space is ready to handle wide addresses. It's known that +at least some JIT compilers use higher bits in pointers to encode their +information. It collides with valid pointers with 5-level paging and +leads to crashes. + +To mitigate this, we are not going to allocate virtual address space +above 47-bit by default. + +But userspace can ask for allocation from full address space by +specifying hint address (with or without MAP_FIXED) above 47-bits. + +If hint address set above 47-bit, but MAP_FIXED is not specified, we try +to look for unmapped area by specified address. If it's already +occupied, we look for unmapped area in *full* address space, rather than +from 47-bit window. + +A high hint address would only affect the allocation in question, but not +any future mmap()s. + +Specifying high hint address on older kernel or on machine without 5-level +paging support is safe. The hint will be ignored and kernel will fall back +to allocation from 47-bit address space. + +This approach helps to easily make application's memory allocator aware +about large address space without manually tracking allocated virtual +address space. + +One important case we need to handle here is interaction with MPX. +MPX (without MAWA extension) cannot handle addresses above 47-bit, so we +need to make sure that MPX cannot be enabled we already have VMA above +the boundary and forbid creating such VMAs once MPX is enabled. + |
