diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/gpio-fan.txt (renamed from Documentation/devicetree/bindings/gpio/gpio-fan.txt) | 0 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/max1619.txt | 12 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/max31785.txt | 22 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/trivial-devices.txt | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/max31785 | 51 | ||||
| -rw-r--r-- | Documentation/hwmon/sht15 | 3 |
6 files changed, 87 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt index 439a7430fc68..439a7430fc68 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt diff --git a/Documentation/devicetree/bindings/hwmon/max1619.txt b/Documentation/devicetree/bindings/hwmon/max1619.txt new file mode 100644 index 000000000000..c70dbbe1e56f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max1619.txt @@ -0,0 +1,12 @@ +Bindings for MAX1619 Temperature Sensor + +Required properties: +- compatible : "maxim,max1619" +- reg : I2C address, one of 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, or + 0x4d, 0x4e + +Example: + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt new file mode 100644 index 000000000000..106e08c56aaa --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max31785.txt @@ -0,0 +1,22 @@ +Bindings for the Maxim MAX31785 Intelligent Fan Controller +========================================================== + +Reference: + +https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +Required properties: +- compatible : One of "maxim,max31785" or "maxim,max31785a" +- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. + +Example: + + fans@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index af284fbd4d23..8bcac6ee73da 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -71,6 +71,7 @@ isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs +maxim,max6621 PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface mc,rv3029c2 Real Time Clock Module with I2C-Bus mcube,mc3230 mCube 3-axis 8-bit digital accelerometer diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785 new file mode 100644 index 000000000000..45fb6093dec2 --- /dev/null +++ b/Documentation/hwmon/max31785 @@ -0,0 +1,51 @@ +Kernel driver max31785 +====================== + +Supported chips: + * Maxim MAX31785, MAX31785A + Prefix: 'max31785' or 'max31785a' + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +Author: Andrew Jeffery <andrew@aj.id.au> + +Description +----------- + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +For dual rotor fan configuration, the MAX31785 exposes the slowest rotor of the +two in the fan[1-4]_input attributes. + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Sysfs attributes +---------------- + +fan[1-4]_alarm Fan alarm. +fan[1-4]_fault Fan fault. +fan[1-4]_input Fan RPM. + +in[1-6]_crit Critical maximum output voltage +in[1-6]_crit_alarm Output voltage critical high alarm +in[1-6]_input Measured output voltage +in[1-6]_label "vout[18-23]" +in[1-6]_lcrit Critical minimum output voltage +in[1-6]_lcrit_alarm Output voltage critical low alarm +in[1-6]_max Maximum output voltage +in[1-6]_max_alarm Output voltage high alarm +in[1-6]_min Minimum output voltage +in[1-6]_min_alarm Output voltage low alarm + +temp[1-11]_crit Critical high temperature +temp[1-11]_crit_alarm Chip temperature critical high alarm +temp[1-11]_input Measured temperature +temp[1-11]_max Maximum temperature +temp[1-11]_max_alarm Chip temperature high alarm diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15 index 778987d1856f..5e3207c3b177 100644 --- a/Documentation/hwmon/sht15 +++ b/Documentation/hwmon/sht15 @@ -42,8 +42,7 @@ chip. These coefficients are used to internally calibrate the signals from the sensors. Disabling the reload of those coefficients allows saving 10ms for each measurement and decrease power consumption, while losing on precision. -Some options may be set directly in the sht15_platform_data structure -or via sysfs attributes. +Some options may be set via sysfs attributes. Notes: * The regulator supply name is set to "vcc". |