diff options
Diffstat (limited to 'Documentation')
19 files changed, 664 insertions, 45 deletions
diff --git a/Documentation/ABI/obsolete/procfs-i8k b/Documentation/ABI/obsolete/procfs-i8k new file mode 100644 index 000000000000..32df4d5bdd15 --- /dev/null +++ b/Documentation/ABI/obsolete/procfs-i8k @@ -0,0 +1,10 @@ +What: /proc/i8k +Date: November 2001 +KernelVersion: 2.4.14 +Contact: Pali Rohár <pali@kernel.org> +Description: Legacy interface for getting/setting sensor information like + fan speed, temperature, serial number, hotkey status etc + on Dell Laptops. + Since the driver is now using the standard hwmon sysfs interface, + the procfs interface is deprecated. +Users: https://github.com/vitorafsr/i8kutils diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon index 1f20687def44..653d4c75eddb 100644 --- a/Documentation/ABI/testing/sysfs-class-hwmon +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -9,6 +9,14 @@ Description: RO +What: /sys/class/hwmon/hwmonX/label +Description: + A descriptive label that allows to uniquely identify a + device within the system. + The contents of the label are free-form. + + RO + What: /sys/class/hwmon/hwmonX/update_interval Description: The interval at which the chip will update readings. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index c2d1f8b5e8f3..486023f7209a 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -944,6 +944,30 @@ dump out devices still on the deferred probe list after retrying. + dell_smm_hwmon.ignore_dmi= + [HW] Continue probing hardware even if DMI data + indicates that the driver is running on unsupported + hardware. + + dell_smm_hwmon.force= + [HW] Activate driver even if SMM BIOS signature does + not match list of supported models and enable otherwise + blacklisted features. + + dell_smm_hwmon.power_status= + [HW] Report power status in /proc/i8k + (disabled by default). + + dell_smm_hwmon.restricted= + [HW] Allow controlling fans only if SYS_ADMIN + capability is set. + + dell_smm_hwmon.fan_mult= + [HW] Factor to multiply fan speed with. + + dell_smm_hwmon.fan_max= + [HW] Maximum configurable fan speed. + dfltcc= [HW,S390] Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on @@ -1703,17 +1727,6 @@ i810= [HW,DRM] - i8k.ignore_dmi [HW] Continue probing hardware even if DMI data - indicates that the driver is running on unsupported - hardware. - i8k.force [HW] Activate i8k driver even if SMM BIOS signature - does not match list of supported models. - i8k.power_status - [HW] Report power status in /proc/i8k - (disabled by default) - i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN - capability is set. - i915.invert_brightness= [DRM] Invert the sense of the variable that is used to set the brightness of the panel backlight. Normally a diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml index 223393d7cafd..ab87f51c5aef 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml @@ -37,6 +37,72 @@ properties: description: Shunt resistor value in micro-Ohm. + adi,volt-curr-sample-average: + description: | + Number of samples to be used to report voltage and current values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + + adi,power-sample-average: + description: | + Number of samples to be used to report power values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,adm1075 + - adi,adm1276 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1275 + then: + properties: + adi,volt-curr-sample-average: + default: 16 + adi,power-sample-average: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1272 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: + default: 128 + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1278 + - adi,adm1293 + - adi,adm1294 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: + default: 1 + required: - compatible - reg @@ -53,5 +119,7 @@ examples: compatible = "adi,adm1272"; reg = <0x10>; shunt-resistor-micro-ohms = <500>; + adi,volt-curr-sample-average = <128>; + adi,power-sample-average = <128>; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index 6e1d54ff5d5b..30db92977937 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -60,7 +60,6 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { @@ -71,8 +70,7 @@ examples: compatible = "onnn,nct1008"; reg = <0x4c>; vcc-supply = <&palmas_ldo6_reg>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml new file mode 100644 index 000000000000..801ca9ba7d34 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP464 and TMP468 temperature sensors + +maintainers: + - Agathe Porte <agathe.porte@nokia.com> + +description: | + ±0.0625°C Remote and Local temperature sensor + https://www.ti.com/lit/ds/symlink/tmp464.pdf + https://www.ti.com/lit/ds/symlink/tmp468.pdf + +properties: + compatible: + enum: + - ti,tmp464 + - ti,tmp468 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@([0-8])$": + type: object + description: | + Represents channels of the device and their specific configuration. + + properties: + reg: + description: | + The channel number. 0 is local channel, 1-8 are remote channels. + items: + minimum: 0 + maximum: 8 + + label: + description: | + A descriptive name for this channel, like "ambient" or "psu". + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the channel specific N correction register. + For remote channels only. + $ref: /schemas/types.yaml#/definitions/int32 + items: + minimum: -128 + maximum: 127 + + required: + - reg + + additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + ti,n-factor = <(-10)>; + label = "external"; + }; + + channel@2 { + reg = <0x2>; + ti,n-factor = <0x10>; + label = "somelabel"; + }; + + channel@3 { + reg = <0x3>; + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 091792ba993e..da929cb08463 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -137,6 +137,8 @@ properties: - infineon,slb9645tt # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor - infineon,tlv493d-a1b6 + # Infineon Multi-phase Digital VR Controller xdpe11280 + - infineon,xdpe11280 # Infineon Multi-phase Digital VR Controller xdpe12254 - infineon,xdpe12254 # Infineon Multi-phase Digital VR Controller xdpe12284 @@ -337,6 +339,7 @@ properties: # Thermometer with SPI interface - ti,tmp121 - ti,tmp122 + - ti,tmp125 # Digital Temperature Sensor - ti,tmp275 # TI DC-DC converter on PMBus @@ -354,6 +357,8 @@ properties: - ti,tps544c25 # Winbond/Nuvoton H/W Monitor - winbond,w83793 + # Vicor Corporation Digital Supervisor + - vicor,pli1209bc # i2c trusted platform module (TPM) - winbond,wpct301 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 294093d45a23..047a83a089ce 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1298,6 +1298,8 @@ patternProperties: description: Vertexcom Technologies, Inc. "^via,.*": description: VIA Technologies, Inc. + "^vicor,.*": + description: Vicor Corporation "^videostrong,.*": description: Videostrong Technology Co., Ltd. "^virtio,.*": diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 1f4bb4ba2e4b..3373e27b707d 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -6,22 +6,21 @@ Kernel driver aquacomputer-d5next Supported devices: * Aquacomputer D5 Next watercooling pump +* Aquacomputer Farbwerk 360 RGB controller Author: Aleksa Savic Description ----------- -This driver exposes hardware sensors of the Aquacomputer D5 Next watercooling -pump, which communicates through a proprietary USB HID protocol. +This driver exposes hardware sensors of listed Aquacomputer devices, which +communicate through proprietary USB HID protocols. -Available sensors are pump and fan speed, power, voltage and current, as -well as coolant temperature. Also available through debugfs are the serial -number, firmware version and power-on count. - -Attaching a fan is optional and allows it to be controlled using temperature -curves directly from the pump. If it's not connected, the fan-related sensors -will report zeroes. +For the D5 Next pump, available sensors are pump and fan speed, power, voltage +and current, as well as coolant temperature. Also available through debugfs are +the serial number, firmware version and power-on count. Attaching a fan to it is +optional and allows it to be controlled using temperature curves directly from the +pump. If it's not connected, the fan-related sensors will report zeroes. The pump can be configured either through software or via its physical interface. Configuring the pump through this driver is not implemented, as it @@ -29,33 +28,31 @@ seems to require sending it a complete configuration. That includes addressable RGB LEDs, for which there is no standard sysfs interface. Thus, that task is better suited for userspace tools. +The Farbwerk 360 exposes four temperature sensors. Depending on the device, +not all sysfs and debugfs entries will be available. + Usage notes ----------- -The pump communicates via HID reports. The driver is loaded automatically by +The devices communicate via HID reports. The driver is loaded automatically by the kernel and supports hotswapping. Sysfs entries ------------- -============ ============================================= -temp1_input Coolant temperature (in millidegrees Celsius) -fan1_input Pump speed (in RPM) -fan2_input Fan speed (in RPM) -power1_input Pump power (in micro Watts) -power2_input Fan power (in micro Watts) -in0_input Pump voltage (in milli Volts) -in1_input Fan voltage (in milli Volts) -in2_input +5V rail voltage (in milli Volts) -curr1_input Pump current (in milli Amperes) -curr2_input Fan current (in milli Amperes) -============ ============================================= +================ ============================================= +temp[1-4]_input Temperature sensors (in millidegrees Celsius) +fan[1-2]_input Pump/fan speed (in RPM) +power[1-2]_input Pump/fan power (in micro Watts) +in[0-2]_input Pump/fan voltage (in milli Volts) +curr[1-2]_input Pump/fan current (in milli Amperes) +================ ============================================= Debugfs entries --------------- -================ =============================================== -serial_number Serial number of the pump +================ ================================================= +serial_number Serial number of the device firmware_version Version of installed firmware -power_cycles Count of how many times the pump was powered on -================ =============================================== +power_cycles Count of how many times the device was powered on +================ ================================================= diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst new file mode 100644 index 000000000000..e7e8f1640f45 --- /dev/null +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -0,0 +1,54 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver asus_ec_sensors +================================= + +Supported boards: + * PRIME X570-PRO, + * Pro WS X570-ACE, + * ROG CROSSHAIR VIII DARK HERO, + * ROG CROSSHAIR VIII HERO (WI-FI) + * ROG CROSSHAIR VIII FORMULA, + * ROG CROSSHAIR VIII HERO, + * ROG CROSSHAIR VIII IMPACT, + * ROG STRIX B550-E GAMING, + * ROG STRIX B550-I GAMING, + * ROG STRIX X570-E GAMING, + * ROG STRIX X570-F GAMING, + * ROG STRIX X570-I GAMING + +Authors: + - Eugene Shalygin <eugene.shalygin@gmail.com> + +Description: +------------ +ASUS mainboards publish hardware monitoring information via Super I/O +chip and the ACPI embedded controller (EC) registers. Some of the sensors +are only available via the EC. + +The driver is aware of and reads the following sensors: + +1. Chipset (PCH) temperature +2. CPU package temperature +3. Motherboard temperature +4. Readings from the T_Sensor header +5. VRM temperature +6. CPU_Opt fan RPM +7. VRM heatsink fan RPM +8. Chipset fan RPM +9. Readings from the "Water flow meter" header (RPM) +10. Readings from the "Water In" and "Water Out" temperature headers +11. CPU current +12. CPU core voltage + +Sensor values are read from EC registers, and to avoid race with the board +firmware the driver acquires ACPI mutex, the one used by the WMI when its +methods access the EC. + +Module Parameters +----------------- + * mutex_path: string + The driver holds path to the ACPI mutex for each board (actually, + the path is mostly identical for them). If ASUS changes this path + in a future BIOS update, this parameter can be used to override + the stored in the driver value until it gets updated. diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst index beec88491171..d3323a96665d 100644 --- a/Documentation/hwmon/dell-smm-hwmon.rst +++ b/Documentation/hwmon/dell-smm-hwmon.rst @@ -165,3 +165,183 @@ obtain the same information and to control the fan status. The ioctl interface can be accessed from C programs or from shell using the i8kctl utility. See the source file of ``i8kutils`` for more information on how to use the ioctl interface. + +SMM Interface +------------- + +.. warning:: The SMM interface was reverse-engineered by trial-and-error + since Dell did not provide any Documentation, + please keep that in mind. + +The driver uses the SMM interface to send commands to the system BIOS. +This interface is normally used by Dell's 32-bit diagnostic program or +on newer notebook models by the buildin BIOS diagnostics. +The SMM is triggered by writing to the special ioports ``0xb2`` and ``0x84``, +and may cause short hangs when the BIOS code is taking too long to +execute. + +The SMM handler inside the system BIOS looks at the contents of the +``eax``, ``ebx``, ``ecx``, ``edx``, ``esi`` and ``edi`` registers. +Each register has a special purpose: + +=============== ================================== +Register Purpose +=============== ================================== +eax Holds the command code before SMM, + holds the first result after SMM. +ebx Holds the arguments. +ecx Unknown, set to 0. +edx Holds the second result after SMM. +esi Unknown, set to 0. +edi Unknown, set to 0. +=============== ================================== + +The SMM handler can signal a failure by either: + +- setting the lower sixteen bits of ``eax`` to ``0xffff`` +- not modifying ``eax`` at all +- setting the carry flag + +SMM command codes +----------------- + +=============== ======================= ================================================ +Command Code Command Name Description +=============== ======================= ================================================ +``0x0025`` Get Fn key status Returns the Fn key pressed after SMM: + + - 9th bit in ``eax`` indicates Volume up + - 10th bit in ``eax`` indicates Volume down + - both bits indicate Volume mute + +``0xa069`` Get power status Returns current power status after SMM: + + - 1st bit in ``eax`` indicates Battery connected + - 3th bit in ``eax`` indicates AC connected + +``0x00a3`` Get fan state Returns current fan state after SMM: + + - 1st byte in ``eax`` holds the current + fan state (0 - 2 or 3) + +``0x01a3`` Set fan state Sets the fan speed: + + - 1st byte in ``ebx`` holds the fan number + - 2nd byte in ``ebx`` holds the desired + fan state (0 - 2 or 3) + +``0x02a3`` Get fan speed Returns the current fan speed in RPM: + + - 1st byte in ``ebx`` holds the fan number + - 1st word in ``eax`` holds the current + fan speed in RPM (after SMM) + +``0x03a3`` Get fan type Returns the fan type: + + - 1st byte in ``ebx`` holds the fan number + - 1st byte in ``eax`` holds the + fan type (after SMM): + + - 5th bit indicates docking fan + - 1 indicates Processor fan + - 2 indicates Motherboard fan + - 3 indicates Video fan + - 4 indicates Power supply fan + - 5 indicates Chipset fan + - 6 indicates other fan type + +``0x04a3`` Get nominal fan speed Returns the nominal RPM in each fan state: + + - 1st byte in ``ebx`` holds the fan number + - 2nd byte in ``ebx`` holds the fan state + in question (0 - 2 or 3) + - 1st word in ``eax`` holds the nominal + fan speed in RPM (after SMM) + +``0x05a3`` Get fan speed tolerance Returns the speed tolerance for each fan state: + + - 1st byte in ``ebx`` holds the fan number + - 2nd byte in ``ebx`` holds the fan state + in question (0 - 2 or 3) + - 1st byte in ``eax`` returns the speed + tolerance + +``0x10a3`` Get sensor temperature Returns the measured temperature: + + - 1st byte in ``ebx`` holds the sensor number + - 1st byte in ``eax`` holds the measured + temperature (after SMM) + +``0x11a3`` Get sensor type Returns the sensor type: + + - 1st byte in ``ebx`` holds the sensor number + - 1st byte in ``eax`` holds the + temperature type (after SMM): + + - 1 indicates CPU sensor + - 2 indicates GPU sensor + - 3 indicates SODIMM sensor + - 4 indicates other sensor type + - 5 indicates Ambient sensor + - 6 indicates other sensor type + +``0xfea3`` Get SMM signature Returns Dell signature if interface + is supported (after SMM): + + - ``eax`` holds 1145651527 + (0x44494147 or "DIAG") + - ``edx`` holds 1145392204 + (0x44454c4c or "DELL") + +``0xffa3`` Get SMM signature Same as ``0xfea3``, check both. +=============== ======================= ================================================ + +There are additional commands for enabling (``0x31a3`` or ``0x35a3``) and +disabling (``0x30a3`` or ``0x34a3``) automatic fan speed control. +The commands are however causing severe sideeffects on many machines, so +they are not used by default. + +On several machines (Inspiron 3505, Precision 490, Vostro 1720, ...), the +fans supports a 4th "magic" state, which signals the BIOS that automatic +fan control should be enabled for a specific fan. +However there are also some machines who do support a 4th regular fan state too, +but in case of the "magic" state, the nominal RPM reported for this state is a +placeholder value, which however is not always detectable. + +Firmware Bugs +------------- + +The SMM calls can behave erratic on some machines: + +======================================================= ================= +Firmware Bug Affected Machines +======================================================= ================= +Reading of fan states return spurious errors. Precision 490 + +Reading of fan types causes erratic fan behaviour. Studio XPS 8000 + + Studio XPS 8100 + + Inspiron 580 + +Fan-related SMM calls take too long (about 500ms). Inspiron 7720 + + Vostro 3360 + + XPS 13 9333 + + XPS 15 L502X +======================================================= ================= + +In case you experience similar issues on your Dell machine, please +submit a bugreport on bugzilla to we can apply workarounds. + +Limitations +----------- + +The SMM calls can take too long to execute on some machines, causing +short hangs and/or audio glitches. +Also the fan state needs to be restored after suspend, as well as +the automatic mode settings. +When reading a temperature sensor, values above 127 degrees indicate +a BIOS read error or a deactivated sensor. diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index df20022c741f..9d2787a12a69 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -43,6 +43,7 @@ Hardware Monitoring Kernel Drivers asb100 asc7621 aspeed-pwm-tacho + asus_ec_sensors asus_wmi_ec_sensors asus_wmi_sensors bcm54140 @@ -160,6 +161,7 @@ Hardware Monitoring Kernel Drivers pc87427 pcf8591 pim4328 + pli1209bc pm6764tr pmbus powr1220 @@ -193,6 +195,7 @@ Hardware Monitoring Kernel Drivers tmp108 tmp401 tmp421 + tmp464 tmp513 tps23861 tps40422 diff --git a/Documentation/hwmon/lm70.rst b/Documentation/hwmon/lm70.rst index 6ddc5b67ccb5..11303a7e16a8 100644 --- a/Documentation/hwmon/lm70.rst +++ b/Documentation/hwmon/lm70.rst @@ -15,6 +15,10 @@ Supported chips: Information: https://www.ti.com/product/tmp122 + * Texas Instruments TMP125 + + Information: https://www.ti.com/product/tmp125 + * National Semiconductor LM71 Datasheet: https://www.ti.com/product/LM71 @@ -53,6 +57,9 @@ The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is The TMP122/TMP124 also feature configurable temperature thresholds. +The TMP125 is less accurate and provides 10-bit temperature data +with 0.25 degrees Celsius resolution. + The LM71 is also very similar; main difference is 14-bit temperature data (0.03125 degrees celsius resolution). diff --git a/Documentation/hwmon/max6639.rst b/Documentation/hwmon/max6639.rst index 3da54225f83c..c85d285a3489 100644 --- a/Documentation/hwmon/max6639.rst +++ b/Documentation/hwmon/max6639.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: I2C 0x2c, 0x2e, 0x2f - Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6639.pdf + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf Authors: - He Changqing <hechangqing@semptian.com> diff --git a/Documentation/hwmon/pli1209bc.rst b/Documentation/hwmon/pli1209bc.rst new file mode 100644 index 000000000000..ea5b3f68a515 --- /dev/null +++ b/Documentation/hwmon/pli1209bc.rst @@ -0,0 +1,75 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver pli1209bc +======================= + +Supported chips: + + * Digital Supervisor PLI1209BC + + Prefix: 'pli1209bc' + + Addresses scanned: 0x50 - 0x5F + + Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf + +Authors: + - Marcello Sylvester Bauer <sylv@sylv.io> + +Description +----------- + +The Vicor PLI1209BC is an isolated digital power system supervisor that provides +a communication interface between a host processor and one Bus Converter Module +(BCM). The PLI communicates with a system controller via a PMBus compatible +interface over an isolated UART interface. Through the PLI, the host processor +can configure, set protection limits, and monitor the BCM. + +Sysfs entries +------------- + +======================= ======================================================== +in1_label "vin2" +in1_input Input voltage. +in1_rated_min Minimum rated input voltage. +in1_rated_max Maximum rated input voltage. +in1_max Maximum input voltage. +in1_max_alarm Input voltage high alarm. +in1_crit Critical input voltage. +in1_crit_alarm Input voltage critical alarm. + +in2_label "vout2" +in2_input Output voltage. +in2_rated_min Minimum rated output voltage. +in2_rated_max Maximum rated output voltage. +in2_alarm Output voltage alarm + +curr1_label "iin2" +curr1_input Input current. +curr1_max Maximum input current. +curr1_max_alarm Maximum input current high alarm. +curr1_crit Critical input current. +curr1_crit_alarm Input current critical alarm. + +curr2_label "iout2" +curr2_input Output current. +curr2_crit Critical output current. +curr2_crit_alarm Output current critical alarm. +curr2_max Maximum output current. +curr2_max_alarm Output current high alarm. + +power1_label "pin2" +power1_input Input power. +power1_alarm Input power alarm. + +power2_label "pout2" +power2_input Output power. +power2_rated_max Maximum rated output power. + +temp1_input Die temperature. +temp1_alarm Die temperature alarm. +temp1_max Maximum die temperature. +temp1_max_alarm Die temperature high alarm. +temp1_crit Critical die temperature. +temp1_crit_alarm Die temperature critical alarm. +======================= ======================================================== diff --git a/Documentation/hwmon/sch5627.rst b/Documentation/hwmon/sch5627.rst index 187682e99114..ecb4fc84d045 100644 --- a/Documentation/hwmon/sch5627.rst +++ b/Documentation/hwmon/sch5627.rst @@ -20,6 +20,10 @@ Description SMSC SCH5627 Super I/O chips include complete hardware monitoring capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. +In addition, the SCH5627 exports data describing which temperature sensors +affect the speed of each fan. Setting pwmX_auto_channels_temp to 0 forces +the corresponding fan to full speed until another value is written. + The SMSC SCH5627 hardware monitoring part also contains an integrated watchdog. In order for this watchdog to function some motherboard specific initialization most be done by the BIOS, so if the watchdog is not enabled diff --git a/Documentation/hwmon/sysfs-interface.rst b/Documentation/hwmon/sysfs-interface.rst index 85652a6aaa3e..209626fb2405 100644 --- a/Documentation/hwmon/sysfs-interface.rst +++ b/Documentation/hwmon/sysfs-interface.rst @@ -99,6 +99,10 @@ Global attributes `name` The chip name. +`label` + A descriptive label that allows to uniquely identify a device + within the system. + `update_interval` The interval at which the chip will update readings. diff --git a/Documentation/hwmon/tmp464.rst b/Documentation/hwmon/tmp464.rst new file mode 100644 index 000000000000..7596e7623d06 --- /dev/null +++ b/Documentation/hwmon/tmp464.rst @@ -0,0 +1,73 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver tmp464 +==================== + +Supported chips: + + * Texas Instruments TMP464 + + Prefix: 'tmp464' + + Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp464.html + + * Texas Instruments TMP468 + + Prefix: 'tmp468' + + Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b + + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp468.html + +Authors: + + Agathe Porte <agathe.porte@nokia.com> + Guenter Roeck <linux@roeck-us.net> + +Description +----------- + +This driver implements support for Texas Instruments TMP464 and TMP468 +temperature sensor chips. TMP464 provides one local and four remote +sensors. TMP468 provides one local and eight remote sensors. +Temperature is measured in degrees Celsius. The chips are wired over +I2C/SMBus and specified over a temperature range of -40 to +125 degrees +Celsius. Resolution for both the local and remote channels is 0.0625 +degree C. + +The chips support only temperature measurements. The driver exports +temperature values, limits, and alarms via the following sysfs files: + +**temp[1-9]_input** + +**temp[1-9]_max** + +**temp[1-9]_max_hyst** + +**temp[1-9]_max_alarm** + +**temp[1-9]_crit** + +**temp[1-9]_crit_alarm** + +**temp[1-9]_crit_hyst** + +**temp[2-9]_offset** + +**temp[2-9]_fault** + +Each sensor can be individually disabled via Devicetree or from sysfs +via: + +**temp[1-9]_enable** + +If labels were specified in Devicetree, additional sysfs files will +be present: + +**temp[1-9]_label** + +The update interval is configurable with the following sysfs attribute. + +**update_interval** diff --git a/Documentation/hwmon/xdpe12284.rst b/Documentation/hwmon/xdpe12284.rst index 67d1f87808e5..a224dc74ad35 100644 --- a/Documentation/hwmon/xdpe12284.rst +++ b/Documentation/hwmon/xdpe12284.rst @@ -5,6 +5,10 @@ Kernel driver xdpe122 Supported chips: + * Infineon XDPE11280 + + Prefix: 'xdpe11280' + * Infineon XDPE12254 Prefix: 'xdpe12254' @@ -20,10 +24,10 @@ Authors: Description ----------- -This driver implements support for Infineon Multi-phase XDPE122 family -dual loop voltage regulators. -The family includes XDPE12284 and XDPE12254 devices. -The devices from this family complaint with: +This driver implements support for Infineon Multi-phase XDPE112 and XDPE122 +family dual loop voltage regulators. +These families include XDPE11280, XDPE12284 and XDPE12254 devices. +The devices from this family compliant with: - Intel VR13 and VR13HC rev 1.3, IMVP8 rev 1.2 and IMPVP9 rev 1.3 DC-DC converter specification. |