diff options
Diffstat (limited to 'Documentation')
71 files changed, 209 insertions, 133 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index c65a80574869..401d202f478b 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -1,4 +1,4 @@ -What: /sys/bus/platform/devices/MLNXBF04:00/driver/lifecycle_state +What: /sys/bus/platform/devices/MLNXBF04:00/lifecycle_state Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -10,7 +10,7 @@ Description: GA Non-Secured - Non-Secure chip and not able to change state RMA - Return Merchandise Authorization -What: /sys/bus/platform/devices/MLNXBF04:00/driver/post_reset_wdog +What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -19,7 +19,7 @@ Description: to reboot the chip and recover it to the old state if the new boot partition fails. -What: /sys/bus/platform/devices/MLNXBF04:00/driver/reset_action +What: /sys/bus/platform/devices/MLNXBF04:00/reset_action Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -30,7 +30,7 @@ Description: emmc - boot from the onchip eMMC emmc_legacy - boot from the onchip eMMC in legacy (slow) mode -What: /sys/bus/platform/devices/MLNXBF04:00/driver/second_reset_action +What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -44,7 +44,7 @@ Description: swap_emmc - swap the primary / secondary boot partition none - cancel the action -What: /sys/bus/platform/devices/MLNXBF04:00/driver/secure_boot_fuse_state +What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst index 594095b54b29..c00f9f11e3f3 100644 --- a/Documentation/admin-guide/device-mapper/dm-integrity.rst +++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst @@ -144,7 +144,7 @@ journal_crypt:algorithm(:key) (the key is optional) Encrypt the journal using given algorithm to make sure that the attacker can't read the journal. You can use a block cipher here (such as "cbc(aes)") or a stream cipher (for example "chacha20", - "salsa20", "ctr(aes)" or "ecb(arc4)"). + "salsa20" or "ctr(aes)"). The journal contains history of last writes to the block device, an attacker reading the journal could see the last sector nubmers diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst index 4872fb6d2952..ec62fcc8eece 100644 --- a/Documentation/admin-guide/device-mapper/index.rst +++ b/Documentation/admin-guide/device-mapper/index.rst @@ -8,6 +8,7 @@ Device Mapper cache-policies cache delay + dm-clone dm-crypt dm-dust dm-flakey diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst index 059ddcbe769d..9bc93f0ce0c9 100644 --- a/Documentation/admin-guide/ext4.rst +++ b/Documentation/admin-guide/ext4.rst @@ -181,14 +181,17 @@ When mounting an ext4 filesystem, the following option are accepted: system after its metadata has been committed to the journal. commit=nrsec (*) - Ext4 can be told to sync all its data and metadata every 'nrsec' - seconds. The default value is 5 seconds. This means that if you lose - your power, you will lose as much as the latest 5 seconds of work (your - filesystem will not be damaged though, thanks to the journaling). This - default value (or any low value) will hurt performance, but it's good - for data-safety. Setting it to 0 will have the same effect as leaving - it at the default (5 seconds). Setting it to very large values will - improve performance. + This setting limits the maximum age of the running transaction to + 'nrsec' seconds. The default value is 5 seconds. This means that if + you lose your power, you will lose as much as the latest 5 seconds of + metadata changes (your filesystem will not be damaged though, thanks + to the journaling). This default value (or any low value) will hurt + performance, but it's good for data-safety. Setting it to 0 will have + the same effect as leaving it at the default (5 seconds). Setting it + to very large values will improve performance. Note that due to + delayed allocation even older data can be lost on power failure since + writeback of those data begins only after time set in + /proc/sys/vm/dirty_expire_centisecs. barrier=<0|1(*)>, barrier(*), nobarrier This enables/disables the use of write barriers in the jbd code. diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index ecdfdc9d4b03..61ae13c44f91 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -203,12 +203,12 @@ Test Module Kselftest tests the kernel from userspace. Sometimes things need testing from within the kernel, one method of doing this is to create a test module. We can tie the module into the kselftest framework by -using a shell script test runner. ``kselftest_module.sh`` is designed +using a shell script test runner. ``kselftest/module.sh`` is designed to facilitate this process. There is also a header file provided to assist writing kernel modules that are for use with kselftest: - ``tools/testing/kselftest/kselftest_module.h`` -- ``tools/testing/kselftest/kselftest_module.sh`` +- ``tools/testing/kselftest/kselftest/module.sh`` How to use ---------- @@ -247,7 +247,7 @@ A bare bones test module might look like this: #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include "../tools/testing/selftests/kselftest_module.h" + #include "../tools/testing/selftests/kselftest/module.h" KSTM_MODULE_GLOBALS(); @@ -276,7 +276,7 @@ Example test script #!/bin/bash # SPDX-License-Identifier: GPL-2.0+ - $(dirname $0)/../kselftest_module.sh "foo" test_foo + $(dirname $0)/../kselftest/module.sh "foo" test_foo Test Harness diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst index 26ffb46bdf99..c60d760a0eed 100644 --- a/Documentation/dev-tools/kunit/index.rst +++ b/Documentation/dev-tools/kunit/index.rst @@ -9,6 +9,7 @@ KUnit - Unit Testing for the Linux Kernel start usage + kunit-tool api/index faq diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst new file mode 100644 index 000000000000..50d46394e97e --- /dev/null +++ b/Documentation/dev-tools/kunit/kunit-tool.rst @@ -0,0 +1,57 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +kunit_tool How-To +================= + +What is kunit_tool? +=================== + +kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building +the Linux kernel as UML (`User Mode Linux +<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing +the test results and displaying them in a user friendly manner. + +What is a kunitconfig? +====================== + +It's just a defconfig that kunit_tool looks for in the base directory. +kunit_tool uses it to generate a .config as you might expect. In addition, it +verifies that the generated .config contains the CONFIG options in the +kunitconfig; the reason it does this is so that it is easy to be sure that a +CONFIG that enables a test actually ends up in the .config. + +How do I use kunit_tool? +======================== + +If a kunitconfig is present at the root directory, all you have to do is: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run + +However, you most likely want to use it with the following options: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` + +- ``--timeout`` sets a maximum amount of time to allow tests to run. +- ``--jobs`` sets the number of threads to use to build the kernel. + +If you just want to use the defconfig that ships with the kernel, you can +append the ``--defconfig`` flag as well: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` --defconfig + +.. note:: + This command is particularly helpful for getting started because it + just works. No kunitconfig needs to be present. + +For a list of all the flags supported by kunit_tool, you can run: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --help diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index aeeddfafeea2..9d6db892c41c 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -19,11 +19,14 @@ The wrapper can be run with: .. code-block:: bash - ./tools/testing/kunit/kunit.py run + ./tools/testing/kunit/kunit.py run --defconfig + +For more information on this wrapper (also called kunit_tool) checkout the +:doc:`kunit-tool` page. Creating a kunitconfig ====================== -The Python script is a thin wrapper around Kbuild as such, it needs to be +The Python script is a thin wrapper around Kbuild. As such, it needs to be configured with a ``kunitconfig`` file. This file essentially contains the regular Kernel config, with the specific test targets as well. @@ -59,8 +62,8 @@ If everything worked correctly, you should see the following: followed by a list of tests that are run. All of them should be passing. .. note:: - Because it is building a lot of sources for the first time, the ``Building - kunit kernel`` step may take a while. + Because it is building a lot of sources for the first time, the + ``Building KUnit kernel`` step may take a while. Writing your first test ======================= @@ -159,7 +162,7 @@ Now you can run the test: .. code-block:: bash - ./tools/testing/kunit/kunit.py + ./tools/testing/kunit/kunit.py run You should see the following failure: diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index c6e69634e274..b9a065ab681e 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -16,7 +16,7 @@ Organization of this document ============================= This document is organized into two main sections: Testing and Isolating -Behavior. The first covers what a unit test is and how to use KUnit to write +Behavior. The first covers what unit tests are and how to use KUnit to write them. The second covers how to use KUnit to isolate code and make it possible to unit test code that was otherwise un-unit-testable. @@ -174,13 +174,13 @@ Test Suites ~~~~~~~~~~~ Now obviously one unit test isn't very helpful; the power comes from having -many test cases covering all of your behaviors. Consequently it is common to -have many *similar* tests; in order to reduce duplication in these closely -related tests most unit testing frameworks provide the concept of a *test -suite*, in KUnit we call it a *test suite*; all it is is just a collection of -test cases for a unit of code with a set up function that gets invoked before -every test cases and then a tear down function that gets invoked after every -test case completes. +many test cases covering all of a unit's behaviors. Consequently it is common +to have many *similar* tests; in order to reduce duplication in these closely +related tests most unit testing frameworks - including KUnit - provide the +concept of a *test suite*. A *test suite* is just a collection of test cases +for a unit of code with a set up function that gets invoked before every test +case and then a tear down function that gets invoked after every test case +completes. Example: @@ -211,7 +211,7 @@ KUnit test framework. .. note:: A test case will only be run if it is associated with a test suite. -For a more information on these types of things see the :doc:`api/test`. +For more information on these types of things see the :doc:`api/test`. Isolating Behavior ================== @@ -338,7 +338,7 @@ We can easily test this code by *faking out* the underlying EEPROM: return count; } - ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count) + ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count) { struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent); @@ -454,7 +454,7 @@ KUnit on non-UML architectures By default KUnit uses UML as a way to provide dependencies for code under test. Under most circumstances KUnit's usage of UML should be treated as an implementation detail of how KUnit works under the hood. Nevertheless, there -are instances where being able to run architecture specific code, or test +are instances where being able to run architecture specific code or test against real hardware is desirable. For these reasons KUnit supports running on other architectures. @@ -557,7 +557,7 @@ run your tests on your hardware setup just by compiling for your architecture. .. important:: Always prefer tests that run on UML to tests that only run under a particular architecture, and always prefer tests that run under QEMU or another easy - (and monitarily free) to obtain software environment to a specific piece of + (and monetarily free) to obtain software environment to a specific piece of hardware. Nevertheless, there are still valid reasons to write an architecture or hardware diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 8a1e38a1d7ab..cffe8bb0bad1 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -8,7 +8,7 @@ title: Allwinner platforms device tree bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: $nodename: diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index d2a872286437..f0b3d30fbb76 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -8,7 +8,7 @@ title: Allwinner A64 Display Engine Bus Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: $nodename: diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index be32f087c529..9fe11ceecdba 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -8,7 +8,7 @@ title: Allwinner A23 RSB Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index 64938fdaea55..4d382128b711 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -8,7 +8,7 @@ title: Allwinner Clock Control Unit Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#clock-cells": diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 80b3e7350a73..33c7842917f6 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Security System Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index dafc0980c4fa..0f7074977c04 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 0e7987f1cdb7..d67617f6f74a 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ronbo RB070D30 DSI Display Panel maintainers: - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml index 15abc0f9429f..83808199657b 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 DMA Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "dma-controller.yaml#" diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index 387d599522c7..9e53472be194 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -8,7 +8,7 @@ title: Allwinner A64 DMA Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "dma-controller.yaml#" diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml index 740b7f9b535b..c1676b96daac 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 DMA Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "dma-controller.yaml#" diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml index 9346ef6ba61b..6097e8ac46c1 100644 --- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml +++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index b68be3aaf587..e1f6d64bdccd 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml# @@ -53,7 +53,8 @@ patternProperties: description: | The channel number. It can have up to 8 channels numbered from 0 to 7. items: - maximum: 7 + - minimum: 0 + maximum: 7 diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml index d74962c0f5ae..15c514b83583 100644 --- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml @@ -8,7 +8,7 @@ title: Allwinner A33 Thermal Sensor Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#io-channel-cells": diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index b3bd8ef7fbd6..5b3b71c9c018 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 LRADC Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml index 23a202d24e43..953d875b5e74 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Interrupt Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/interrupt-controller.yaml# diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index 8cd08cfb25be..cf09055da78b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -8,7 +8,7 @@ title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/interrupt-controller.yaml# diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index d3e423fcb6c2..0f6374ceaa69 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> description: |- The Allwinner A10 and later has a CMOS Sensor Interface to retrieve diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index dea36d68cdbe..7838804700d6 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Infrared Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "rc.yaml#" diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml index 30d9fb193d7f..22a94b6fdbde 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -60,7 +60,8 @@ patternProperties: maximum: 1066000000 nvidia,emem-configuration: - $ref: /schemas/types.yaml#/definitions/uint32-array + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml index 7fe0ca14e324..e4135bac6957 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -56,7 +56,8 @@ patternProperties: maximum: 900000000 nvidia,emc-auto-cal-interval: - $ref: /schemas/types.yaml#/definitions/uint32 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds. minimum: 0 @@ -78,7 +79,8 @@ patternProperties: Mode Register 0. nvidia,emc-zcal-cnt-long: - $ref: /schemas/types.yaml#/definitions/uint32 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD. @@ -96,7 +98,8 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled. nvidia,emc-configuration: - $ref: /schemas/types.yaml#/definitions/uint32-array + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml index 84fd57bcf0dc..4b9196c83291 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml @@ -77,7 +77,8 @@ patternProperties: maximum: 900000000 nvidia,emem-configuration: - $ref: /schemas/types.yaml#/definitions/uint32-array + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 4b1a09acb98b..39afacc447b2 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#thermal-sensor-cells": diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index 64bca41031d5..e82c9a07b6fb 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index b5b3cf5b1ac2..5d3fa412aabd 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index ae4796ec50a0..8d8560a67abf 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml index e5562c525ed9..767193ec1d32 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 MDIO Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "mdio.yaml#" diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml index f683b7104e3e..703d0d886884 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 11654d4b80fb..db36b4d86484 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -8,7 +8,7 @@ title: Allwinner A83t EMAC Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index 770af7c46114..a95960ee3feb 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 CAN Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 27e1b4cebfbd..6bdcc3f84bd3 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -10,7 +10,6 @@ Required properties: - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. - interrupt-parent: the phandle to the interrupt controller which provides the interrupt. - interrupts: interrupt specification for data-ready. @@ -23,6 +22,7 @@ Optional properties: reset. - device-state-gpios: Input GPIO that indicates if the device is in a sleep state or if the device is active. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Example: tcan4x5x: tcan4x5x@0 { @@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 { interrupts = <14 GPIO_ACTIVE_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 4845e29411e4..e08cd4c4d568 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -347,6 +347,7 @@ allOf: - st,spear600-gmac then: + properties: snps,tso: $ref: /schemas/types.yaml#definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 81ae8cafabc1..ac8c76369a86 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml# @@ -44,7 +44,6 @@ properties: description: CPSW functional clock clock-names: - maxItems: 1 items: - const: fck @@ -70,7 +69,6 @@ properties: Phandle to the system control device node which provides access to efuse IO range with MAC addresses - ethernet-ports: type: object properties: @@ -82,8 +80,6 @@ properties: patternProperties: "^port@[0-9]+$": type: object - minItems: 1 - maxItems: 2 description: CPSW external ports allOf: @@ -91,23 +87,20 @@ properties: properties: reg: - maxItems: 1 - enum: [1, 2] + items: + - enum: [1, 2] description: CPSW port number phys: - $ref: /schemas/types.yaml#definitions/phandle-array maxItems: 1 description: phandle on phy-gmii-sel PHY label: - $ref: /schemas/types.yaml#/definitions/string-array - maxItems: 1 description: label associated with this port ti,dual-emac-pvid: - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 1024 description: @@ -136,7 +129,6 @@ properties: description: CPTS reference clock clock-names: - maxItems: 1 items: - const: cpts @@ -201,7 +193,7 @@ examples: phys = <&phy_gmii_sel 1>; phy-handle = <ðphy0_sw>; phy-mode = "rgmii"; - ti,dual_emac_pvid = <1>; + ti,dual-emac-pvid = <1>; }; cpsw_port2: port@2 { @@ -211,7 +203,7 @@ examples: phys = <&phy_gmii_sel 2>; phy-handle = <ðphy1_sw>; phy-mode = "rgmii"; - ti,dual_emac_pvid = <2>; + ti,dual-emac-pvid = <2>; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 659b02002a35..daf1321d76ad 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Security ID Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "nvmem.yaml#" diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index fa46670de299..230d74f22136 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#phy-cells": diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index cd0503b6fe36..bfefd09d8c1e 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Pin Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#gpio-cells": diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 0ac52f83a58c..4a21fe77ee1d 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 PWM Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#pwm-cells": diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index acf18d170352..c0d83865e933 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -50,6 +50,8 @@ properties: description: Should contain the WWDG1 watchdog reset interrupt maxItems: 1 + wakeup-source: true + mboxes: description: This property is required only if the rpmsg/virtio functionality is used. diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt index 6e5341b4f891..ee59409640f2 100644 --- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt +++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt @@ -22,6 +22,6 @@ Example: }; ðernet_switch { - resets = <&reset>; + resets = <&reset 26>; reset-names = "switch"; }; diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml index 46d69c32b89b..478b0234e8fa 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index d7a57ec4a640..37c2a601c3fa 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 RTC Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#clock-cells": diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml index ee9712f1c97d..2ecab8ed702a 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 PS2 Host Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> description: A20 PS2 is dual role controller (PS2 host and PS2 device). These diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index b8f89c7258eb..ea1d2efb2aaa 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index eb3992138eec..112ae00d63c1 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 I2S Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index 38d4cede0860..444a432912bb 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -10,7 +10,7 @@ maintainers: - Chen-Yu Tsai <wens@csie.org> - Liam Girdwood <lgirdwood@gmail.com> - Mark Brown <broonie@kernel.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml index f290eb72a878..3b764415c9ab 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml @@ -8,7 +8,7 @@ title: Allwinner A64 Analog Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml index 85305b4c2729..9718358826ab 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml @@ -8,7 +8,7 @@ title: Allwinner A23 Analog Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml index 5e7cc05bbff1..55d28268d2f4 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml @@ -8,7 +8,7 @@ title: Allwinner A33 Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index 6d1329c28170..8036499112f5 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index f36c46d236d7..0565dc49e449 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 20adc1c8e9cc..23e989e09766 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Timer Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml index dfa0c41fd261..40fc4bcb3145 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml @@ -8,7 +8,7 @@ title: Allwinner A13 High-Speed Timer Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index 0af70fc8de5a..d9207bf9d894 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 mUSB OTG Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index 3a54f58683a0..e8f226376108 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/filesystems/erofs.txt b/Documentation/filesystems/erofs.txt index b0c085326e2e..db6d39c3ae71 100644 --- a/Documentation/filesystems/erofs.txt +++ b/Documentation/filesystems/erofs.txt @@ -24,11 +24,11 @@ Here is the main features of EROFS: - Metadata & data could be mixed by design; - 2 inode versions for different requirements: - v1 v2 + compact (v1) extended (v2) Inode metadata size: 32 bytes 64 bytes Max file size: 4 GB 16 EB (also limited by max. vol size) Max uids/gids: 65536 4294967296 - File creation time: no yes (64 + 32-bit timestamp) + File change time: no yes (64 + 32-bit timestamp) Max hardlinks: 65536 4294967296 Metadata reserved: 4 bytes 14 bytes @@ -39,7 +39,7 @@ Here is the main features of EROFS: - Support POSIX.1e ACLs by using xattrs; - Support transparent file compression as an option: - LZ4 algorithm with 4 KB fixed-output compression for high performance; + LZ4 algorithm with 4 KB fixed-sized output compression for high performance. The following git tree provides the file system user-space tools under development (ex, formatting tool mkfs.erofs): @@ -85,7 +85,7 @@ All data areas should be aligned with the block size, but metadata areas may not. All metadatas can be now observed in two different spaces (views): 1. Inode metadata space Each valid inode should be aligned with an inode slot, which is a fixed - value (32 bytes) and designed to be kept in line with v1 inode size. + value (32 bytes) and designed to be kept in line with compact inode size. Each inode can be directly found with the following formula: inode offset = meta_blkaddr * block_size + 32 * nid @@ -117,10 +117,10 @@ may not. All metadatas can be now observed in two different spaces (views): |-> aligned with 4B Inode could be 32 or 64 bytes, which can be distinguished from a common - field which all inode versions have -- i_advise: + field which all inode versions have -- i_format: __________________ __________________ - | i_advise | | i_advise | + | i_format | | i_format | |__________________| |__________________| | ... | | ... | | | | | @@ -129,12 +129,13 @@ may not. All metadatas can be now observed in two different spaces (views): |__________________| 64 bytes Xattrs, extents, data inline are followed by the corresponding inode with - proper alignes, and they could be optional for different data mappings, - _currently_ there are totally 3 valid data mappings supported: + proper alignment, and they could be optional for different data mappings. + _currently_ total 4 valid data mappings are supported: - 1) flat file data without data inline (no extent); - 2) fixed-output size data compression (must have extents); - 3) flat file data with tail-end data inline (no extent); + 0 flat file data without data inline (no extent); + 1 fixed-sized output data compression (with non-compacted indexes); + 2 flat file data with tail packing data inline (no extent); + 3 fixed-sized output data compression (with compacted indexes, v5.3+). The size of the optional xattrs is indicated by i_xattr_count in inode header. Large xattrs or xattrs shared by many different files can be @@ -182,8 +183,8 @@ introduce another on-disk field at all. Compression ----------- -Currently, EROFS supports 4KB fixed-output clustersize transparent file -compression, as illustrated below: +Currently, EROFS supports 4KB fixed-sized output transparent file compression, +as illustrated below: |---- Variant-Length Extent ----|-------- VLE --------|----- VLE ----- clusterofs clusterofs clusterofs diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.rst index 845d689e0fd7..e443be7928db 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Written by: Neil Brown Please see MAINTAINERS file for where to send questions. @@ -181,7 +183,7 @@ Kernel config options: worried about backward compatibility with kernels that have the redirect_dir feature and follow redirects even if turned off. -Module options (can also be changed through /sys/module/overlay/parameters/*): +Module options (can also be changed through /sys/module/overlay/parameters/): - "redirect_dir=BOOL": See OVERLAY_FS_REDIRECT_DIR kernel config option above. @@ -263,7 +265,7 @@ top, lower2 the middle and lower3 the bottom layer. Metadata only copy up --------------------- +--------------------- When metadata only copy up feature is enabled, overlayfs will only copy up metadata (as opposed to whole file), when a metadata specific operation @@ -286,10 +288,10 @@ pointed by REDIRECT. This should not be possible on local system as setting "trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible for untrusted layers like from a pen drive. -Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and +Note: redirect_dir={off|nofollow|follow[*]} conflicts with metacopy=on, and results in an error. -(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is +[*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is given. Sharing and copying layers diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 74bef19f69f0..231e6a64957f 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -196,14 +196,11 @@ applicable everywhere (see syntax). or equal to the first symbol and smaller than or equal to the second symbol. -- help text: "help" or "---help---" +- help text: "help" This defines a help text. The end of the help text is determined by the indentation level, this means it ends at the first line which has a smaller indentation than the first line of the help text. - "---help---" and "help" do not differ in behaviour, "---help---" is - used to help visually separate configuration logic from help within - the file as an aid to developers. - misc options: "option" <symbol>[=<value>] diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index b9b50553bfc5..d7e6534a8505 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -297,9 +297,19 @@ more details, with real examples. If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular) the corresponding obj- variable will be set, and kbuild will descend down in the ext2 directory. - Kbuild only uses this information to decide that it needs to visit - the directory, it is the Makefile in the subdirectory that - specifies what is modular and what is built-in. + + Kbuild uses this information not only to decide that it needs to visit + the directory, but also to decide whether or not to link objects from + the directory into vmlinux. + + When Kbuild descends into the directory with 'y', all built-in objects + from that directory are combined into the built-in.a, which will be + eventually linked into vmlinux. + + When Kbuild descends into the directory with 'm', in contrast, nothing + from that directory will be linked into vmlinux. If the Makefile in + that directory specifies obj-y, those objects will be left orphan. + It is very likely a bug of the Makefile or of dependencies in Kconfig. It is good practice to use a `CONFIG_` variable when assigning directory names. This allows kbuild to totally skip the directory if the diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst index dc60b13fcd09..f5be243d250a 100644 --- a/Documentation/networking/j1939.rst +++ b/Documentation/networking/j1939.rst @@ -339,7 +339,7 @@ To claim an address following code example can be used: .pgn = J1939_PGN_ADDRESS_CLAIMED, .pgn_mask = J1939_PGN_PDU1_MAX, }, { - .pgn = J1939_PGN_ADDRESS_REQUEST, + .pgn = J1939_PGN_REQUEST, .pgn_mask = J1939_PGN_PDU1_MAX, }, { .pgn = J1939_PGN_ADDRESS_COMMANDED, diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index ada573b7d703..edb296c52f61 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -988,7 +988,7 @@ Similarly, if you need to calculate the size of some structure member, use .. code-block:: c - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define sizeof_field(t, f) (sizeof(((t*)0)->f)) There are also min() and max() macros that do strict type checking if you need them. Feel free to peruse that header file to see what else is already diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt index 201f80c7c050..df129f55ace5 100644 --- a/Documentation/scsi/smartpqi.txt +++ b/Documentation/scsi/smartpqi.txt @@ -29,7 +29,7 @@ smartpqi specific entries in /sys smartpqi host attributes: ------------------------- /sys/class/scsi_host/host*/rescan - /sys/class/scsi_host/host*/version + /sys/class/scsi_host/host*/driver_version The host rescan attribute is a write only attribute. Writing to this attribute will trigger the driver to scan for new, changed, or removed diff --git a/Documentation/translations/it_IT/process/coding-style.rst b/Documentation/translations/it_IT/process/coding-style.rst index 8995d2d19f20..8725f2b9e960 100644 --- a/Documentation/translations/it_IT/process/coding-style.rst +++ b/Documentation/translations/it_IT/process/coding-style.rst @@ -1005,7 +1005,7 @@ struttura, usate .. code-block:: c - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define sizeof_field(t, f) (sizeof(((t*)0)->f)) Ci sono anche le macro min() e max() che, se vi serve, effettuano un controllo rigido sui tipi. Sentitevi liberi di leggere attentamente questo file diff --git a/Documentation/translations/zh_CN/process/coding-style.rst b/Documentation/translations/zh_CN/process/coding-style.rst index 4f6237392e65..eae10bc7f86f 100644 --- a/Documentation/translations/zh_CN/process/coding-style.rst +++ b/Documentation/translations/zh_CN/process/coding-style.rst @@ -826,7 +826,7 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 .. code-block:: c - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define sizeof_field(t, f) (sizeof(((t*)0)->f)) 还有可以做严格的类型检查的 min() 和 max() 宏，如果你需要可以使用它们。你可以 自己看看那个头文件里还定义了什么你可以拿来用的东西，如果有定义的话，你就不应 |