diff options
Diffstat (limited to 'Documentation')
96 files changed, 1433 insertions, 221 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-firmware-acpi b/Documentation/ABI/obsolete/sysfs-firmware-acpi new file mode 100644 index 000000000000..6715a71bec3d --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-firmware-acpi @@ -0,0 +1,8 @@ +What: /sys/firmware/acpi/hotplug/force_remove +Date: Mar 2017 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + Since the force_remove is inherently broken and dangerous to + use for some hotplugable resources like memory (because ignoring + the offline failure might lead to memory corruption and crashes) + enabling this knob is not safe and thus unsupported. diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 2da04ce6aeef..dea212db9df3 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -213,14 +213,8 @@ What: /sys/block/<disk>/queue/discard_zeroes_data Date: May 2011 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: - Devices that support discard functionality may return - stale or random data when a previously discarded block - is read back. This can cause problems if the filesystem - expects discarded blocks to be explicitly cleared. If a - device reports that it deterministically returns zeroes - when a discarded area is read the discard_zeroes_data - parameter will be set to one. Otherwise it will be 0 and - the result of reading a discarded area is undefined. + Will always return 0. Don't rely on any specific behavior + for discards, and don't read this file. What: /sys/block/<disk>/queue/write_same_max_bytes Date: January 2012 diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index c7fc72d4495c..613f42a9d5cd 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -44,16 +44,6 @@ Description: or 0 (unset). Attempts to write any other values to it will cause -EINVAL to be returned. -What: /sys/firmware/acpi/hotplug/force_remove -Date: May 2013 -Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> -Description: - The number in this file (0 or 1) determines whether (1) or not - (0) the ACPI subsystem will allow devices to be hot-removed even - if they cannot be put offline gracefully (from the kernel's - viewpoint). That number can be changed by writing a boolean - value to this file. - What: /sys/firmware/acpi/interrupts/ Date: February 2008 Contact: Len Brown <lenb@kernel.org> diff --git a/Documentation/acpi/dsd/graph.txt b/Documentation/acpi/dsd/graph.txt new file mode 100644 index 000000000000..ac09e3138b79 --- /dev/null +++ b/Documentation/acpi/dsd/graph.txt @@ -0,0 +1,162 @@ +Graphs + + +_DSD +---- + +_DSD (Device Specific Data) [7] is a predefined ACPI device +configuration object that can be used to convey information on +hardware features which are not specifically covered by the ACPI +specification [1][6]. There are two _DSD extensions that are relevant +for graphs: property [4] and hierarchical data extensions [5]. The +property extension provides generic key-value pairs whereas the +hierarchical data extension supports nodes with references to other +nodes, forming a tree. The nodes in the tree may contain properties as +defined by the property extension. The two extensions together provide +a tree-like structure with zero or more properties (key-value pairs) +in each node of the tree. + +The data structure may be accessed at runtime by using the device_* +and fwnode_* functions defined in include/linux/fwnode.h . + +Fwnode represents a generic firmware node object. It is independent on +the firmware type. In ACPI, fwnodes are _DSD hierarchical data +extensions objects. A device's _DSD object is represented by an +fwnode. + +The data structure may be referenced to elsewhere in the ACPI tables +by using a hard reference to the device itself and an index to the +hierarchical data extension array on each depth. + + +Ports and endpoints +------------------- + +The port and endpoint concepts are very similar to those in Devicetree +[3]. A port represents an interface in a device, and an endpoint +represents a connection to that interface. + +All port nodes are located under the device's "_DSD" node in the +hierarchical data extension tree. The property extension related to +each port node must contain the key "port" and an integer value which +is the number of the port. The object it refers to should be called "PRTX", +where "X" is the number of the port. + +Further on, endpoints are located under the individual port nodes. The +first hierarchical data extension package list entry of the endpoint +nodes must begin with "endpoint" and must be followed by the number +of the endpoint. The object it refers to should be called "EPXY", where +"X" is the number of the port and "Y" is the number of the endpoint. + +Each port node contains a property extension key "port", the value of +which is the number of the port node. The each endpoint is similarly numbered +with a property extension key "endpoint". Port numbers must be unique within a +device and endpoint numbers must be unique within a port. + +The endpoint reference uses property extension with "remote-endpoint" property +name followed by a reference in the same package. Such references consist of the +the remote device reference, number of the port in the device and finally the +number of the endpoint in that port. Individual references thus appear as: + + Package() { device, port_number, endpoint_number } + +The references to endpoints must be always done both ways, to the +remote endpoint and back from the referred remote endpoint node. + +A simple example of this is show below: + + Scope (\_SB.PCI0.I2C2) + { + Device (CAM0) + { + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "compatible", Package () { "nokia,smia" } }, + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "port0", "PRT0" }, + } + }) + Name (PRT0, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "port", 0 }, + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "endpoint0", "EP00" }, + } + }) + Name (EP00, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "endpoint", 0 }, + Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, 4, 0 } }, + } + }) + } + } + + Scope (\_SB.PCI0) + { + Device (ISP) + { + Name (_DSD, Package () { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "port4", "PRT4" }, + } + }) + + Name (PRT4, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "port", 4 }, /* CSI-2 port number */ + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "endpoint0", "EP40" }, + } + }) + + Name (EP40, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "endpoint", 0 }, + Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, 0, 0 } }, + } + }) + } + } + +Here, the port 0 of the "CAM0" device is connected to the port 4 of +the "ISP" device and vice versa. + + +References +---------- + +[1] _DSD (Device Specific Data) Implementation Guide. + <URL:http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm>, + referenced 2016-10-03. + +[2] Devicetree. <URL:http://www.devicetree.org>, referenced 2016-10-03. + +[3]Â Documentation/devicetree/bindings/graph.txt + +[4] Device Properties UUID For _DSD. + <URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>, + referenced 2016-10-04. + +[5] Hierarchical Data Extension UUID For _DSD. + <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.pdf>, + referenced 2016-10-04. + +[6] Advanced Configuration and Power Interface Specification. + <URL:http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf>, + referenced 2016-10-04. + +[7] _DSD Device Properties Usage Rules. + Documentation/acpi/DSD-properties-rules.txt diff --git a/Documentation/acpi/linuxized-acpica.txt b/Documentation/acpi/linuxized-acpica.txt index defe2eec5331..3ad7b0dfb083 100644 --- a/Documentation/acpi/linuxized-acpica.txt +++ b/Documentation/acpi/linuxized-acpica.txt @@ -24,7 +24,7 @@ upstream. The homepage of ACPICA project is: www.acpica.org, it is maintained and supported by Intel Corporation. - The following figure depicts the Linux ACPI subystem where the ACPICA + The following figure depicts the Linux ACPI subsystem where the ACPICA adaptation is included: +---------------------------------------------------------+ @@ -110,7 +110,7 @@ upstream. Linux patches. The patches generated by this process are referred to as "linuxized ACPICA patches". The release process is carried out on a local copy the ACPICA git repository. Each commit in the monthly release is - converted into a linuxized ACPICA patch. Together, they form the montly + converted into a linuxized ACPICA patch. Together, they form the monthly ACPICA release patchset for the Linux ACPI community. This process is illustrated in the following figure: @@ -165,7 +165,7 @@ upstream. <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>. Before the linuxized ACPICA patches are sent to the Linux ACPI community - for review, there is a quality ensurance build test process to reduce + for review, there is a quality assurance build test process to reduce porting issues. Currently this build process only takes care of the following kernel configuration options: CONFIG_ACPI/CONFIG_ACPI_DEBUG/CONFIG_ACPI_DEBUGGER @@ -195,12 +195,12 @@ upstream. release utilities (please refer to Section 4 below for the details). 3. Linux specific features - Sometimes it's impossible to use the current ACPICA APIs to implement features required by the Linux kernel, - so Linux developers occasionaly have to change ACPICA code directly. + so Linux developers occasionally have to change ACPICA code directly. Those changes may not be acceptable by ACPICA upstream and in such cases they are left as committed ACPICA divergences unless the ACPICA side can implement new mechanisms as replacements for them. 4. ACPICA release fixups - ACPICA only tests commits using a set of the - user space simulation utilies, thus the linuxized ACPICA patches may + user space simulation utilities, thus the linuxized ACPICA patches may break the Linux kernel, leaving us build/boot failures. In order to avoid breaking Linux bisection, fixes are applied directly to the linuxized ACPICA patches during the release process. When the release diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index 697a00ccec25..02f639aab06e 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -27,7 +27,7 @@ On what hardware does it run? today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - Xtensa, Tilera TILE, AVR32, ARC and Renesas M32R architectures. + Xtensa, Tilera TILE, ARC and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index b516164999a8..c74933ccf7c9 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -86,7 +86,6 @@ parameter is applicable:: APIC APIC support is enabled. APM Advanced Power Management support is enabled. ARM ARM architecture is enabled. - AVR32 AVR32 architecture is enabled. AX25 Appropriate AX.25 support is enabled. BLACKFIN Blackfin architecture is enabled. CLK Common clock infrastructure is enabled. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index facc20a3f962..ba294509cd7e 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -531,7 +531,6 @@ [ACPI] acpi_pm [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2, pxa_timer,timer3,32k_counter,timer0_1 - [AVR32] avr32 [X86-32] pit,hpet,tsc; scx200_hrt on Geode; cyclone on IBM x440 [MIPS] MIPS @@ -2425,7 +2424,7 @@ osd-targets. Please see: Documentation/filesystems/pnfs.txt for more explanations - nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take + nmi_debug= [KNL,SH] Specify one or more actions to take when a NMI is triggered. Format: [state][,regs][,debounce][,die] @@ -3178,6 +3177,12 @@ ramdisk_size= [RAM] Sizes of RAM disks in kilobytes See Documentation/blockdev/ramdisk.txt. + ras=option[,option,...] [KNL] RAS-specific options + + cec_disable [X86] + Disable the Correctable Errors Collector, + see CONFIG_RAS_CEC help text. + rcu_nocbs= [KNL] The argument is a cpu list, as described above. diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 2f66683500b8..10f2dddbf449 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -54,6 +54,7 @@ stable kernels. | ARM | Cortex-A57 | #852523 | N/A | | ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 | | ARM | Cortex-A72 | #853709 | N/A | +| ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index e55103ace382..8d55b4bbb5e2 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - This file +bfq-iosched.txt + - BFQ IO scheduler and its tunables biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 biovecs.txt diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt new file mode 100644 index 000000000000..1b87df6cd476 --- /dev/null +++ b/Documentation/block/bfq-iosched.txt @@ -0,0 +1,531 @@ +BFQ (Budget Fair Queueing) +========================== + +BFQ is a proportional-share I/O scheduler, with some extra +low-latency capabilities. In addition to cgroups support (blkio or io +controllers), BFQ's main features are: +- BFQ guarantees a high system and application responsiveness, and a + low latency for time-sensitive applications, such as audio or video + players; +- BFQ distributes bandwidth, and not just time, among processes or + groups (switching back to time distribution when needed to keep + throughput high). + +On average CPUs, the current version of BFQ can handle devices +performing at most ~30K IOPS; at most ~50 KIOPS on faster CPUs. As a +reference, 30-50 KIOPS correspond to very high bandwidths with +sequential I/O (e.g., 8-12 GB/s if I/O requests are 256 KB large), and +to 120-200 MB/s with 4KB random I/O. BFQ has not yet been tested on +multi-queue devices. + +The table of contents follow. Impatients can just jump to Section 3. + +CONTENTS + +1. When may BFQ be useful? + 1-1 Personal systems + 1-2 Server systems +2. How does BFQ work? +3. What are BFQ's tunable? +4. BFQ group scheduling + 4-1 Service guarantees provided + 4-2 Interface + +1. When may BFQ be useful? +========================== + +BFQ provides the following benefits on personal and server systems. + +1-1 Personal systems +-------------------- + +Low latency for interactive applications + +Regardless of the actual background workload, BFQ guarantees that, for +interactive tasks, the storage device is virtually as responsive as if +it was idle. For example, even if one or more of the following +background workloads are being executed: +- one or more large files are being read, written or copied, +- a tree of source files is being compiled, +- one or more virtual machines are performing I/O, +- a software update is in progress, +- indexing daemons are scanning filesystems and updating their + databases, +starting an application or loading a file from within an application +takes about the same time as if the storage device was idle. As a +comparison, with CFQ, NOOP or DEADLINE, and in the same conditions, +applications experience high latencies, or even become unresponsive +until the background workload terminates (also on SSDs). + +Low latency for soft real-time applications + +Also soft real-time applications, such as audio and video +players/streamers, enjoy a low latency and a low drop rate, regardless +of the background I/O workload. As a consequence, these applications +do not suffer from almost any glitch due to the background workload. + +Higher speed for code-development tasks + +If some additional workload happens to be executed in parallel, then +BFQ executes the I/O-related components of typical code-development +tasks (compilation, checkout, merge, ...) much more quickly than CFQ, +NOOP or DEADLINE. + +High throughput + +On hard disks, BFQ achieves up to 30% higher throughput than CFQ, and +up to 150% higher throughput than DEADLINE and NOOP, with all the +sequential workloads considered in our tests. With random workloads, +and with all the workloads on flash-based devices, BFQ achieves, +instead, about the same throughput as the other schedulers. + +Strong fairness, bandwidth and delay guarantees + +BFQ distributes the device throughput, and not just the device time, +among I/O-bound applications in proportion their weights, with any +workload and regardless of the device parameters. From these bandwidth +guarantees, it is possible to compute tight per-I/O-request delay +guarantees by a simple formula. If not configured for strict service +guarantees, BFQ switches to time-based resource sharing (only) for +applications that would otherwise cause a throughput loss. + +1-2 Server systems +------------------ + +Most benefits for server systems follow from the same service +properties as above. In particular, regardless of whether additional, +possibly heavy workloads are being served, BFQ guarantees: + +. audio and video-streaming with zero or very low jitter and drop + rate; + +. fast retrieval of WEB pages and embedded objects; + +. real-time recording of data in live-dumping applications (e.g., + packet logging); + +. responsiveness in local and remote access to a server. + + +2. How does BFQ work? +===================== + +BFQ is a proportional-share I/O scheduler, whose general structure, +plus a lot of code, are borrowed from CFQ. + +- Each process doing I/O on a device is associated with a weight and a + (bfq_)queue. + +- BFQ grants exclusive access to the device, for a while, to one queue + (process) at a time, and implements this service model by + associating every queue with a budget, measured in number of + sectors. + + - After a queue is granted access to the device, the budget of the + queue is decremented, on each request dispatch, by the size of the + request. + + - The in-service queue is expired, i.e., its service is suspended, + only if one of the following events occurs: 1) the queue finishes + its budget, 2) the queue empties, 3) a "budget timeout" fires. + + - The budget timeout prevents processes doing random I/O from + holding the device for too long and dramatically reducing + throughput. + + - Actually, as in CFQ, a queue associated with a process issuing + sync requests may not be expired immediately when it empties. In + contrast, BFQ may idle the device for a short time interval, + giving the process the chance to go on being served if it issues + a new request in time. Device idling typically boosts the + throughput on rotational devices, if processes do synchronous + and sequential I/O. In addition, under BFQ, device idling is + also instrumental in guaranteeing the desired throughput + fraction to processes issuing sync requests (see the description + of the slice_idle tunable in this document, or [1, 2], for more + details). + + - With respect to idling for service guarantees, if several + processes are competing for the device at the same time, but + all processes (and groups, after the following commit) have + the same weight, then BFQ guarantees the expected throughput + distribution without ever idling the device. Throughput is + thus as high as possible in this common scenario. + + - If low-latency mode is enabled (default configuration), BFQ + executes some special heuristics to detect interactive and soft + real-time applications (e.g., video or audio players/streamers), + and to reduce their latency. The most important action taken to + achieve this goal is to give to the queues associated with these + applications more than their fair share of the device + throughput. For brevity, we call just "weight-raising" the whole + sets of actions taken by BFQ to privilege these queues. In + particular, BFQ provides a milder form of weight-raising for + interactive applications, and a stronger form for soft real-time + applications. + + - BFQ automatically deactivates idling for queues born in a burst of + queue creations. In fact, these queues are usually associated with + the processes of applications and services that benefit mostly + from a high throughput. Examples are systemd during boot, or git + grep. + + - As CFQ, BFQ merges queues performing interleaved I/O, i.e., + performing random I/O that becomes mostly sequential if + merged. Differently from CFQ, BFQ achieves this goal with a more + reactive mechanism, called Early Queue Merge (EQM). EQM is so + responsive in detecting interleaved I/O (cooperating processes), + that it enables BFQ to achieve a high throughput, by queue + merging, even for queues for which CFQ needs a different + mechanism, preemption, to get a high throughput. As such EQM is a + unified mechanism to achieve a high throughput with interleaved + I/O. + + - Queues are scheduled according to a variant of WF2Q+, named + B-WF2Q+, and implemented using an augmented rb-tree to preserve an + O(log N) overall complexity. See [2] for more details. B-WF2Q+ is + also ready for hierarchical scheduling. However, for a cleaner + logical breakdown, the code that enables and completes + hierarchical support is provided in the next commit, which focuses + exactly on this feature. + + - B-WF2Q+ guarantees a tight deviation with respect to an ideal, + perfectly fair, and smooth service. In particular, B-WF2Q+ + guarantees that each queue receives a fraction of the device + throughput proportional to its weight, even if the throughput + fluctuates, and regardless of: the device parameters, the current + workload and the budgets assigned to the queue. + + - The last, budget-independence, property (although probably + counterintuitive in the first place) is definitely beneficial, for + the following reasons: + + - First, with any proportional-share scheduler, the maximum + deviation with respect to an ideal service is proportional to + the maximum budget (slice) assigned to queues. As a consequence, + BFQ can keep this deviation tight not only because of the + accurate service of B-WF2Q+, but also because BFQ *does not* + need to assign a larger budget to a queue to let the queue + receive a higher fraction of the device throughput. + + - Second, BFQ is free to choose, for every process (queue), the + budget that best fits the needs of the process, or best + leverages the I/O pattern of the process. In particular, BFQ + updates queue budgets with a simple feedback-loop algorithm that + allows a high throughput to be achieved, while still providing + tight latency guarantees to time-sensitive applications. When + the in-service queue expires, this algorithm computes the next + budget of the queue so as to: + + - Let large budgets be eventually assigned to the queues + associated with I/O-bound applications performing sequential + I/O: in fact, the longer these applications are served once + got access to the device, the higher the throughput is. + + - Let small budgets be eventually assigned to the queues + associated with time-sensitive applications (which typically + perform sporadic and short I/O), because, the smaller the + budget assigned to a queue waiting for service is, the sooner + B-WF2Q+ will serve that queue (Subsec 3.3 in [2]). + +- If several processes are competing for the device at the same time, + but all processes and groups have the same weight, then BFQ + guarantees the expected throughput distribution without ever idling + the device. It uses preemption instead. Throughput is then much + higher in this common scenario. + +- ioprio classes are served in strict priority order, i.e., + lower-priority queues are not served as long as there are + higher-priority queues. Among queues in the same class, the + bandwidth is distributed in proportion to the weight of each + queue. A very thin extra bandwidth is however guaranteed to + the Idle class, to prevent it from starving. + + +3. What are BFQ's tunable? +========================== + +The tunables back_seek-max, back_seek_penalty, fifo_expire_async and +fifo_expire_sync below are the same as in CFQ. Their description is +just copied from that for CFQ. Some considerations in the description +of slice_idle are copied from CFQ too. + +per-process ioprio and weight +----------------------------- + +Unless the cgroups interface is used (see "4. BFQ group scheduling"), +weights can be assigned to processes only indirectly, through I/O +priorities, and according to the relation: +weight = (IOPRIO_BE_NR - ioprio) * 10. + +Beware that, if low-latency is set, then BFQ automatically raises the +weight of the queues associated with interactive and soft real-time +applications. Unset this tunable if you need/want to control weights. + +slice_idle +---------- + +This parameter specifies how long BFQ should idle for next I/O +request, when certain sync BFQ queues become empty. By default +slice_idle is a non-zero value. Idling has a double purpose: boosting +throughput and making sure that the desired throughput distribution is +respected (see the description of how BFQ works, and, if needed, the +papers referred there). + +As for throughput, idling can be very helpful on highly seeky media +like single spindle SATA/SAS disks where we can cut down on overall +number of seeks and see improved throughput. + +Setting slice_idle to 0 will remove all the idling on queues and one +should see an overall improved throughput on faster storage devices +like multiple SATA/SAS disks in hardware RAID configuration. + +So depending on storage and workload, it might be useful to set +slice_idle=0. In general for SATA/SAS disks and software RAID of +SATA/SAS disks keeping slice_idle enabled should be useful. For any +configurations where there are multiple spindles behind single LUN +(Host based hardware RAID controller or for storage arrays), setting +slice_idle=0 might end up in better throughput and acceptable +latencies. + +Idling is however necessary to have service guarantees enforced in +case of differentiated weights or differentiated I/O-request lengths. +To see why, suppose that a given BFQ queue A must get several I/O +requests served for each request served for another queue B. Idling +ensures that, if A makes a new I/O request slightly after becoming +empty, then no request of B is dispatched in the middle, and thus A +does not lose the possibility to get more than one request dispatched +before the next request of B is dispatched. Note that idling +guarantees the desired differentiated treatment of queues only in +terms of I/O-request dispatches. To guarantee that the actual service +order then corresponds to the dispatch order, the strict_guarantees +tunable must be set too. + +There is an important flipside for idling: apart from the above cases +where it is beneficial also for throughput, idling can severely impact +throughput. One important case is random workload. Because of this +issue, BFQ tends to avoid idling as much as possible, when it is not +beneficial also for throughput. As a consequence of this behavior, and +of further issues described for the strict_guarantees tunable, +short-term service guarantees may be occasionally violated. And, in +some cases, these guarantees may be more important than guaranteeing +maximum throughput. For example, in video playing/streaming, a very +low drop rate may be more important than maximum throughput. In these +cases, consider setting the strict_guarantees parameter. + +strict_guarantees +----------------- + +If this parameter is set (default: unset), then BFQ + +- always performs idling when the in-service queue becomes empty; + +- forces the device to serve one I/O request at a time, by dispatching a + new request only if there is no outstanding request. + +In the presence of differentiated weights or I/O-request sizes, both +the above conditions are needed to guarantee that every BFQ queue +receives its allotted share of the bandwidth. The first condition is +needed for the reasons explained in the description of the slice_idle +tunable. The second condition is needed because all modern storage +devices reorder internally-queued requests, which may trivially break +the service guarantees enforced by the I/O scheduler. + +Setting strict_guarantees may evidently affect throughput. + +back_seek_max +------------- + +This specifies, given in Kbytes, the maximum "distance" for backward seeking. +The distance is the amount of space from the current head location to the +sectors that are backward in terms of distance. + +This parameter allows the scheduler to anticipate requests in the "backward" +direction and consider them as being the "next" if they are within this +distance from the current head location. + +back_seek_penalty +----------------- + +This parameter is used to compute the cost of backward seeking. If the +backward distance of request is just 1/back_seek_penalty from a "front" +request, then the seeking cost of two requests is considered equivalent. + +So scheduler will not bias toward one or the other request (otherwise scheduler +will bias toward front request). Default value of back_seek_penalty is 2. + +fifo_expire_async +----------------- + +This parameter is used to set the timeout of asynchronous requests. Default +value of this is 248ms. + +fifo_expire_sync +---------------- + +This parameter is used to set the timeout of synchronous requests. Default +value of this is 124ms. In case to favor synchronous requests over asynchronous +one, this value should be decreased relative to fifo_expire_async. + +low_latency +----------- + +This parameter is used to enable/disable BFQ's low latency mode. By +default, low latency mode is enabled. If enabled, interactive and soft +real-time applications are privileged and experience a lower latency, +as explained in more detail in the description of how BFQ works. + +DO NOT enable this mode if you need full control on bandwidth +distribution. In fact, if it is enabled, then BFQ automatically +increases the bandwidth share of privileged applications, as the main +means to guarantee a lower latency to them. + +timeout_sync +------------ + +Maximum amount of device time that can be given to a task (queue) once +it has been selected for service. On devices with costly seeks, +increasing this time usually increases maximum throughput. On the +opposite end, increasing this time coarsens the granularity of the +short-term bandwidth and latency guarantees, especially if the +following parameter is set to zero. + +max_budget +---------- + +Maximum amount of service, measured in sectors, that can be provided +to a BFQ queue once it is set in service (of course within the limits +of the above timeout). According to what said in the description of +the algorithm, larger values increase the throughput in proportion to +the percentage of sequential I/O requests issued. The price of larger +values is that they coarsen the granularity of short-term bandwidth +and latency guarantees. + +The default value is 0, which enables auto-tuning: BFQ sets max_budget +to the maximum number of sectors that can be served during +timeout_sync, according to the estimated peak rate. + +weights +------- + +Read-only parameter, used to show the weights of the currently active +BFQ queues. + + +wr_ tunables +------------ + +BFQ exports a few parameters to control/tune the behavior of +low-latency heuristics. + +wr_coeff + +Factor by which the weight of a weight-raised queue is multiplied. If +the queue is deemed soft real-time, then the weight is further +multiplied by an additional, constant factor. + +wr_max_time + +Maximum duration of a weight-raising period for an interactive task +(ms). If set to zero (default value), then this value is computed +automatically, as a function of the peak rate of the device. In any +case, when the value of this parameter is read, it always reports the +current duration, regardless of whether it has been set manually or +computed automatically. + +wr_max_softrt_rate + +Maximum service rate below which a queue is deemed to be associated +with a soft real-time application, and is then weight-raised +accordingly (sectors/sec). + +wr_min_idle_time + +Minimum idle period after which interactive weight-raising may be +reactivated for a queue (in ms). + +wr_rt_max_time + +Maximum weight-raising duration for soft real-time queues (in ms). The +start time from which this duration is considered is automatically +moved forward if the queue is detected to be still soft real-time +before the current soft real-time weight-raising period finishes. + +wr_min_inter_arr_async + +Minimum period between I/O request arrivals after which weight-raising +may be reactivated for an already busy async queue (in ms). + + +4. Group scheduling with BFQ +============================ + +BFQ supports both cgroups-v1 and cgroups-v2 io controllers, namely +blkio and io. In particular, BFQ supports weight-based proportional +share. To activate cgroups support, set BFQ_GROUP_IOSCHED. + +4-1 Service guarantees provided +------------------------------- + +With BFQ, proportional share means true proportional share of the +device bandwidth, according to group weights. For example, a group +with weight 200 gets twice the bandwidth, and not just twice the time, +of a group with weight 100. + +BFQ supports hierarchies (group trees) of any depth. Bandwidth is +distributed among groups and processes in the expected way: for each +group, the children of the group share the whole bandwidth of the +group in proportion to their weights. In particular, this implies +that, for each leaf group, every process of the group receives the +same share of the whole group bandwidth, unless the ioprio of the +process is modified. + +The resource-sharing guarantee for a group may partially or totally +switch from bandwidth to time, if providing bandwidth guarantees to +the group lowers the throughput too much. This switch occurs on a +per-process basis: if a process of a leaf group causes throughput loss +if served in such a way to receive its share of the bandwidth, then +BFQ switches back to just time-based proportional share for that +process. + +4-2 Interface +------------- + +To get proportional sharing of bandwidth with BFQ for a given device, +BFQ must of course be the active scheduler for that device. + +Within each group directory, the names of the files associated with +BFQ-specific cgroup parameters and stats begin with the "bfq." +prefix. So, with cgroups-v1 or cgroups-v2, the full prefix for +BFQ-specific files is "blkio.bfq." or "io.bfq." For example, the group +parameter to set the weight of a group with BFQ is blkio.bfq.weight +or io.bfq.weight. + +Parameters to set +----------------- + +For each group, there is only the following parameter to set. + +weight (namely blkio.bfq.weight or io.bfq-weight): the weight of the +group inside its parent. Available values: 1..10000 (default 100). The +linear mapping between ioprio and weights, described at the beginning +of the tunable section, is still valid, but all weights higher than +IOPRIO_BE_NR*10 are mapped to ioprio 0. + +Recall that, if low-latency is set, then BFQ automatically raises the +weight of the queues associated with interactive and soft real-time +applications. Unset this tunable if you need/want to control weights. + + +[1] P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O + Scheduler", Proceedings of the First Workshop on Mobile System + Technologies (MST-2015), May 2015. + http://algogroup.unimore.it/people/paolo/disk_sched/mst-2015.pdf + +[2] P. Valente and M. Andreolini, "Improving Application + Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of + the 5th Annual International Systems and Storage Conference + (SYSTOR '12), June 2012. + Slightly extended version: + http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite- + results.pdf diff --git a/Documentation/block/kyber-iosched.txt b/Documentation/block/kyber-iosched.txt new file mode 100644 index 000000000000..e94feacd7edc --- /dev/null +++ b/Documentation/block/kyber-iosched.txt @@ -0,0 +1,14 @@ +Kyber I/O scheduler tunables +=========================== + +The only two tunables for the Kyber scheduler are the target latencies for +reads and synchronous writes. Kyber will throttle requests in order to meet +these target latencies. + +read_lat_nsec +------------- +Target latency for reads (in nanoseconds). + +write_lat_nsec +-------------- +Target latency for synchronous writes (in nanoseconds). diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index c0a3bb5a6e4e..2c1e67058fd3 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -43,11 +43,6 @@ large discards are issued, setting this value lower will make Linux issue smaller discards and potentially help reduce latencies induced by large discard operations. -discard_zeroes_data (RO) ------------------------- -When read, this file will show if the discarded block are zeroed by the -device or not. If its value is '1' the blocks are zeroed otherwise not. - hw_sector_size (RO) ------------------- This is the hardware sector size of the device, in bytes. @@ -192,5 +187,11 @@ scaling back writes. Writing a value of '0' to this file disables the feature. Writing a value of '-1' to this file resets the value to the default setting. +throttle_sample_time (RW) +------------------------- +This is the time window that blk-throttle samples data, in millisecond. +blk-throttle makes decision based on the samplings. Lower time means cgroups +have more smooth throughput, but higher CPU overhead. This exists only when +CONFIG_BLK_DEV_THROTTLING_LOW is enabled. Jens Axboe <jens.axboe@oracle.com>, February 2009 diff --git a/Documentation/blockdev/mflash.txt b/Documentation/blockdev/mflash.txt deleted file mode 100644 index f7e050551487..000000000000 --- a/Documentation/blockdev/mflash.txt +++ /dev/null @@ -1,84 +0,0 @@ -This document describes m[g]flash support in linux. - -Contents - 1. Overview - 2. Reserved area configuration - 3. Example of mflash platform driver registration - -1. Overview - -Mflash and gflash are embedded flash drive. The only difference is mflash is -MCP(Multi Chip Package) device. These two device operate exactly same way. -So the rest mflash repersents mflash and gflash altogether. - -Internally, mflash has nand flash and other hardware logics and supports -2 different operation (ATA, IO) modes. ATA mode doesn't need any new -driver and currently works well under standard IDE subsystem. Actually it's -one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have -IDE interface. - -Following are brief descriptions about IO mode. -A. IO mode based on ATA protocol and uses some custom command. (read confirm, -write confirm) -B. IO mode uses SRAM bus interface. -C. IO mode supports 4kB boot area, so host can boot from mflash. - -2. Reserved area configuration -If host boot from mflash, usually needs raw area for boot loader image. All of -the mflash's block device operation will be taken this value as start offset. -Note that boot loader's size of reserved area and kernel configuration value -must be same. - -3. Example of mflash platform driver registration -Working mflash is very straight forward. Adding platform device stuff to board -configuration file is all. Here is some pseudo example. - -static struct mg_drv_data mflash_drv_data = { - /* If you want to polling driver set to 1 */ - .use_polling = 0, - /* device attribution */ - .dev_attr = MG_BOOT_DEV -}; - -static struct resource mg_mflash_rsc[] = { - /* Base address of mflash */ - [0] = { - .start = 0x08000000, - .end = 0x08000000 + SZ_64K - 1, - .flags = IORESOURCE_MEM - }, - /* mflash interrupt pin */ - [1] = { - .start = IRQ_GPIO(84), - .end = IRQ_GPIO(84), - .flags = IORESOURCE_IRQ - }, - /* mflash reset pin */ - [2] = { - .start = 43, - .end = 43, - .name = MG_RST_PIN, - .flags = IORESOURCE_IO - }, - /* mflash reset-out pin - * If you use mflash as storage device (i.e. other than MG_BOOT_DEV), - * should assign this */ - [3] = { - .start = 51, - .end = 51, - .name = MG_RSTOUT_PIN, - .flags = IORESOURCE_IO - } -}; - -static struct platform_device mflash_dev = { - .name = MG_DEV_NAME, - .id = -1, - .dev = { - .platform_data = &mflash_drv_data, - }, - .num_resources = ARRAY_SIZE(mg_mflash_rsc), - .resource = mg_mflash_rsc -}; - -platform_device_register(&mflash_dev); diff --git a/Documentation/devicetree/bindings/ata/ahci-dm816.txt b/Documentation/devicetree/bindings/ata/ahci-dm816.txt new file mode 100644 index 000000000000..f8c535f3541f --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-dm816.txt @@ -0,0 +1,21 @@ +Device tree binding for the TI DM816 AHCI SATA Controller +--------------------------------------------------------- + +Required properties: + - compatible: must be "ti,dm816-ahci" + - reg: physical base address and size of the register region used by + the controller (as defined by the AHCI 1.1 standard) + - interrupts: interrupt specifier (refer to the interrupt binding) + - clocks: list of phandle and clock specifier pairs (or only + phandles for clock providers with '0' defined for + #clock-cells); two clocks must be specified: the functional + clock and an external reference clock + +Example: + + sata: sata@4a140000 { + compatible = "ti,dm816-ahci"; + reg = <0x4a140000 0x10000>; + interrupts = <16>; + clocks = <&sysclk5_ck>, <&sata_refclk>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ads7828.txt b/Documentation/devicetree/bindings/hwmon/ads7828.txt new file mode 100644 index 000000000000..fe0cc4ad7ea9 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ads7828.txt @@ -0,0 +1,25 @@ +ads7828 properties + +Required properties: +- compatible: Should be one of + ti,ads7828 + ti,ads7830 +- reg: I2C address + +Optional properties: + +- ti,differential-input + Set to use the device in differential mode. +- vref-supply + The external reference on the device is set to this regulators output. If it + does not exists the internal reference will be used and output by the ads78xx + on the "external vref" pin. + + Example ADS7828 node: + + ads7828: ads@48 { + comatible = "ti,ads7828"; + reg = <0x48>; + vref-supply = <&vref>; + ti,differential-input; + }; diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt new file mode 100644 index 000000000000..cf4460564adb --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -0,0 +1,68 @@ +ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver + +The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho +controller can support upto 16 Fan tachometer inputs. + +There can be upto 8 fans supported. Each fan can have one PWM output and +one/two Fan tach inputs. + +Required properties for pwm-tacho node: +- #address-cells : should be 1. + +- #size-cells : should be 1. + +- reg : address and length of the register set for the device. + +- pinctrl-names : a pinctrl state named "default" must be defined. + +- pinctrl-0 : phandle referencing pin configuration of the PWM ports. + +- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and + "aspeed,ast2500-pwm-tacho" for AST2500. + +- clocks : a fixed clock providing input clock frequency(PWM + and Fan Tach clock) + +fan subnode format: +=================== +Under fan subnode there can upto 8 child nodes, with each child node +representing a fan. If there are 8 fans each fan can have one PWM port and +one/two Fan tach inputs. + +Required properties for each child node: +- reg : should specify PWM source port. + integer value in the range 0 to 7 with 0 indicating PWM port A and + 7 indicating PWM port H. + +- aspeed,fan-tach-ch : should specify the Fan tach input channel. + integer value in the range 0 through 15, with 0 indicating + Fan tach channel 0 and 15 indicating Fan tach channel 15. + Atleast one Fan tach input channel is required. + +Examples: + +pwm_tacho_fixed_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; +}; + +pwm_tacho: pwmtachocontroller@1e786000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1E786000 0x1000>; + compatible = "aspeed,ast2500-pwm-tacho"; + clocks = <&pwm_tacho_fixed_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt new file mode 100644 index 000000000000..e1b79903f204 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -0,0 +1,30 @@ +*LM87 hwmon sensor. + +Required properties: +- compatible: Should be + "ti,lm87" + +- reg: I2C address + +optional properties: +- has-temp3: This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + +- has-in6: When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + +- has-in7: When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + +- vcc-supply: a Phandle for the regulator supplying power, can be + cofigured to measure 5.0V power supply. Default is 3.3V. + +Example: + +lm87@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/cortina,gemini-interrupt-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt index 97c1167fa533..24428d47f487 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/cortina,gemini-interrupt-controller.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt @@ -1,9 +1,12 @@ -* Cortina Systems Gemini interrupt controller +* Faraday Technologt FTINTC010 interrupt controller -This interrupt controller is found on the Gemini SoCs. +This interrupt controller is a stock IP block from Faraday Technology found +in the Gemini SoCs and other designs. Required properties: -- compatible: must be "cortina,gemini-interrupt-controller" +- compatible: must be one of + "faraday,ftintc010" + "cortina,gemini-interrupt-controller" (deprecated) - reg: The register bank for the interrupt controller. - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: The number of cells to define the interrupts. @@ -15,7 +18,7 @@ Required properties: Example: interrupt-controller@48000000 { - compatible = "cortina,gemini-interrupt-controller"; + compatible = "faraday,ftintc010" reg = <0x48000000 0x1000>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt new file mode 100644 index 000000000000..a7efdbc3de5b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt @@ -0,0 +1,35 @@ +* Mediatek 27xx cirq + +In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to +work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC. +The external interrupts (outside MCUSYS) will feed through CIRQ and connect +to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive +interrupts and generate a pulse signal to parent interrupt controller when +flush command is executed. With CIRQ, MCUSYS can be completely turned off +to improve the system power consumption without losing interrupts. + +Required properties: +- compatible: should be one of + - "mediatek,mt2701-cirq" for mt2701 CIRQ + - "mediatek,mt8135-cirq" for mt8135 CIRQ + - "mediatek,mt8173-cirq" for mt8173 CIRQ + and "mediatek,cirq" as a fallback. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. +- interrupt-parent: phandle of irq parent for cirq. The parent must + use the same interrupt-cells format as GIC. +- reg: Physical base address of the cirq registers and length of memory + mapped region. +- mediatek,ext-irq-range: Identifies external irq number range in different + SOCs. + +Example: + cirq: interrupt-controller@10204000 { + compatible = "mediatek,mt2701-cirq", + "mediatek,mtk-cirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&sysirq>; + reg = <0 0x10204000 0 0x400>; + mediatek,ext-irq-start = <32 200>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index 9d1d72c65489..a89c03bb1a81 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -21,13 +21,16 @@ Required properties: - interrupt-parent: phandle of irq parent for sysirq. The parent must use the same interrupt-cells format as GIC. - reg: Physical base address of the intpol registers and length of memory - mapped region. + mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others + need 1. Example: - sysirq: interrupt-controller@10200100 { - compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq"; + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt6797-sysirq", + "mediatek,mt6577-sysirq"; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; - reg = <0 0x10200100 0 0x1c>; + reg = <0 0x10220620 0 0x20>, + <0 0x10220690 0 0x10>; }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt index 6f28969af9dc..028268fd99ee 100644 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt @@ -6,7 +6,9 @@ perform in-band IPMI communication with their host. Required properties: -- compatible : should be "aspeed,ast2400-ibt-bmc" +- compatible : should be one of + "aspeed,ast2400-ibt-bmc" + "aspeed,ast2500-ibt-bmc" - reg: physical address and size of the registers Optional properties: diff --git a/Documentation/devicetree/bindings/leds/leds-cpcap.txt b/Documentation/devicetree/bindings/leds/leds-cpcap.txt new file mode 100644 index 000000000000..ebf7cdc7f70c --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-cpcap.txt @@ -0,0 +1,29 @@ +Motorola CPCAP PMIC LEDs +------------------------ + +This module is part of the CPCAP. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt. + +Requires node properties: +- compatible: should be one of + * "motorola,cpcap-led-mdl" (Main Display Lighting) + * "motorola,cpcap-led-kl" (Keyboard Lighting) + * "motorola,cpcap-led-adl" (Aux Display Lighting) + * "motorola,cpcap-led-red" (Red Triode) + * "motorola,cpcap-led-green" (Green Triode) + * "motorola,cpcap-led-blue" (Blue Triode) + * "motorola,cpcap-led-cf" (Camera Flash) + * "motorola,cpcap-led-bt" (Bluetooth) + * "motorola,cpcap-led-cp" (Camera Privacy LED) +- label: see Documentation/devicetree/bindings/leds/common.txt +- vdd-supply: A phandle to the regulator powering the LED + +Example: + +&cpcap { + cpcap_led_red: red-led { + compatible = "motorola,cpcap-led-red"; + label = "cpcap:red"; + vdd-supply = <&sw5>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt new file mode 100644 index 000000000000..45bf9f7d85f3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt @@ -0,0 +1,60 @@ +Device Tree Bindings for LED support on MT6323 PMIC + +MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED +controllers are defined as the subnode of the function node provided by MT6323 +PMIC controller that is being defined as one kind of Muti-Function Device (MFD) +using shared bus called PMIC wrapper for each subfunction to access remote +MT6323 PMIC hardware. + +For MT6323 MFD bindings see: +Documentation/devicetree/bindings/mfd/mt6397.txt +For MediaTek PMIC wrapper bindings see: +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt + +Required properties: +- compatible : Must be "mediatek,mt6323-led" +- address-cells : Must be 1 +- size-cells : Must be 0 + +Each led is represented as a child node of the mediatek,mt6323-led that +describes the initial behavior for each LED physically and currently only four +LED child nodes can be supported. + +Required properties for the LED child node: +- reg : LED channel number (0..3) + +Optional properties for the LED child node: +- label : See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt +- default-state: See Documentation/devicetree/bindings/leds/common.txt + +Example: + + mt6323: pmic { + compatible = "mediatek,mt6323"; + + ... + + mt6323led: leds { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "LED0"; + linux,default-trigger = "timer"; + default-state = "on"; + }; + led@1 { + reg = <1>; + label = "LED1"; + default-state = "off"; + }; + led@2 { + reg = <2>; + label = "LED2"; + default-state = "on"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt index 198f3ba0e01f..f769c52e3643 100644 --- a/Documentation/devicetree/bindings/leds/leds-pca9532.txt +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt @@ -17,6 +17,8 @@ Optional sub-node properties: - label: see Documentation/devicetree/bindings/leds/common.txt - type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE) - linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt + - default-state: see Documentation/devicetree/bindings/leds/common.txt + This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>. Example: #include <dt-bindings/leds/leds-pca9532.h> @@ -33,6 +35,14 @@ Example: label = "pca:green:power"; type = <PCA9532_TYPE_LED>; }; + kernel-booting { + type = <PCA9532_TYPE_LED>; + default-state = "on"; + }; + sys-stat { + type = <PCA9532_TYPE_LED>; + default-state = "keep"; // don't touch, was set by U-Boot + }; }; For more product information please see the link below: diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt new file mode 100644 index 000000000000..752ae6b00d26 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -0,0 +1,59 @@ +Broadcom FlexRM Ring Manager +============================ +The Broadcom FlexRM ring manager provides a set of rings which can be +used to submit work to offload engines. An SoC may have multiple FlexRM +hardware blocks. There is one device tree entry per FlexRM block. The +FlexRM driver will create a mailbox-controller instance for given FlexRM +hardware block where each mailbox channel is a separate FlexRM ring. + +Required properties: +-------------------- +- compatible: Should be "brcm,iproc-flexrm-mbox" +- reg: Specifies base physical address and size of the FlexRM + ring registers +- msi-parent: Phandles (and potential Device IDs) to MSI controllers + The FlexRM engine will send MSIs (instead of wired + interrupts) to CPU. There is one MSI for each FlexRM ring. + Refer devicetree/bindings/interrupt-controller/msi.txt +- #mbox-cells: Specifies the number of cells needed to encode a mailbox + channel. This should be 3. + + The 1st cell is the mailbox channel number. + + The 2nd cell contains MSI completion threshold. This is the + number of completion messages for which FlexRM will inject + one MSI interrupt to CPU. + + The 3nd cell contains MSI timer value representing time for + which FlexRM will wait to accumulate N completion messages + where N is the value specified by 2nd cell above. If FlexRM + does not get required number of completion messages in time + specified by this cell then it will inject one MSI interrupt + to CPU provided atleast one completion message is available. + +Optional properties: +-------------------- +- dma-coherent: Present if DMA operations made by the FlexRM engine (such + as DMA descriptor access, access to buffers pointed by DMA + descriptors and read/write pointer updates to DDR) are + cache coherent with the CPU. + +Example: +-------- +crypto_mbox: mbox@67000000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x67000000 0x200000>; + msi-parent = <&gic_its 0x7f00>; + #mbox-cells = <3>; +}; + +crypto@672c0000 { + compatible = "brcm,spu2-v2-crypto"; + reg = <0x672c0000 0x1000>; + mboxes = <&crypto_mbox 0 0x1 0xffff>, + <&crypto_mbox 1 0x1 0xffff>, + <&crypto_mbox 16 0x1 0xffff>, + <&crypto_mbox 17 0x1 0xffff>, + <&crypto_mbox 30 0x1 0xffff>, + <&crypto_mbox 31 0x1 0xffff>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt index 411ccf421584..0f3ee81d92c2 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt @@ -1,9 +1,11 @@ The PDC driver manages data transfer to and from various offload engines on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is -one device tree entry per block. +one device tree entry per block. On some chips, the PDC functionality is +handled by the FA2 (Northstar Plus). Required properties: -- compatible : Should be "brcm,iproc-pdc-mbox". +- compatible : Should be "brcm,iproc-pdc-mbox" or "brcm,iproc-fa2-mbox" for + FA2/Northstar Plus. - reg: Should contain PDC registers location and length. - interrupts: Should contain the IRQ line for the PDC. - #mbox-cells: 1 diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index b7fa3b97986d..a339dbb15493 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible): }; HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. + +Some BIOSes place the host controller in a mode where it is ECAM +compliant for all devices other than the root complex. In such cases, +the host controller should be described as below. + The properties and their meanings are identical to those described in host-generic-pci.txt except as listed below. Properties of the host controller node that differ from host-generic-pci.txt: -- compatible : Must be "hisilicon,pcie-almost-ecam" +- compatible : Must be "hisilicon,hip06-pcie-ecam", or + "hisilicon,hip07-pcie-ecam" - reg : Two entries: First the ECAM configuration space for any other bus underneath the root bus. Second, the base @@ -59,7 +65,7 @@ host-generic-pci.txt: Example: pcie0: pcie@a0090000 { - compatible = "hisilicon,pcie-almost-ecam"; + compatible = "hisilicon,hip06-pcie-ecam"; reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */ <0 0xa0090000 0 0x10000>; /* host bridge registers */ bus-range = <0 31>; diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 723e1ad937da..940707d095cc 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -31,7 +31,9 @@ Optional properties: - domain-idle-states : A phandle of an idle-state that shall be soaked into a generic domain power state. The idle state definitions are - compatible with domain-idle-state specified in [1]. + compatible with domain-idle-state specified in [1]. phandles + that are not compatible with domain-idle-state will be + ignored. The domain-idle-state property reflects the idle state of this PM domain and not the idle states of the devices or sub-domains in the PM domain. Devices and sub-domains have their own idle-states independent of the parent diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt new file mode 100644 index 000000000000..7fec3e100214 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt @@ -0,0 +1,17 @@ +* Device-Tree bindings for Cortina Systems Gemini Poweroff + +This is a special IP block in the Cortina Gemini SoC that only +deals with different ways to power the system down. + +Required properties: +- compatible: should be "cortina,gemini-power-controller" +- reg: should contain the physical memory base and size +- interrupts: should contain the power management interrupt + +Example: + +power-controller@4b000000 { + compatible = "cortina,gemini-power-controller"; + reg = <0x4b000000 0x100>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt index 1e2546f8b08a..022ed1f3bc80 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt @@ -3,13 +3,20 @@ Generic SYSCON mapped register poweroff driver This is a generic poweroff driver using syscon to map the poweroff register. The poweroff is generally performed with a write to the poweroff register defined by the register map pointed by syscon reference plus the offset -with the mask defined in the poweroff node. +with the value and mask defined in the poweroff node. Required properties: - compatible: should contain "syscon-poweroff" - regmap: this is phandle to the register map node - offset: offset in the register map for the poweroff register (in bytes) -- mask: the poweroff value written to the poweroff register (32 bit access) +- value: the poweroff value written to the poweroff register (32 bit access) + +Optional properties: +- mask: update only the register bits defined by the mask (32 bit) + +Legacy usage: +If a node doesn't contain a value property but contains a mask property, the +mask property is used as the value. Default will be little endian mode, 32 bit access only. diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index d23dc002a87e..d3a5a93a65cd 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -33,6 +33,7 @@ Required properties: - compatible: should be one of: - "rockchip,rk3188-io-voltage-domain" for rk3188 - "rockchip,rk3288-io-voltage-domain" for rk3288 + - "rockchip,rk3328-io-voltage-domain" for rk3328 - "rockchip,rk3368-io-voltage-domain" for rk3368 - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - "rockchip,rk3399-io-voltage-domain" for rk3399 diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt new file mode 100644 index 000000000000..80bd873c3b1d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt @@ -0,0 +1,37 @@ +Motorola CPCAP PMIC battery charger binding + +Required properties: +- compatible: Shall be "motorola,mapphone-cpcap-charger" +- interrupts: Interrupt specifier for each name in interrupt-names +- interrupt-names: Should contain the following entries: + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb" +- io-channels: IIO ADC channel specifier for each name in io-channel-names +- io-channel-names: Should contain the following entries: + "battdetb", "battp", "vbus", "chg_isense", "batti" + +Optional properties: +- mode-gpios: Optionally CPCAP charger can have a companion wireless + charge controller that is controlled with two GPIOs + that are active low. + +Example: + +cpcap_charger: charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = < + &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 + &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + >; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW + &gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 2 &cpcap_adc 5 + &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; +}; diff --git a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt new file mode 100644 index 000000000000..5485633b1faa --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt @@ -0,0 +1,21 @@ +LEGO MINDSTORMS EV3 Battery +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery. +It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is +detected by a key switch in the battery compartment. + +Required properties: + - compatible: Must be "lego,ev3-battery" + - io-channels: phandles to analog inputs for reading voltage and current + - io-channel-names: Must be "voltage", "current" + - rechargeable-gpios: phandle to the rechargeable battery indication gpio + +Example: + + battery { + compatible = "lego,ev3-battery"; + io-channels = <&adc 4>, <&adc 3>; + io-channel-names = "voltage", "current"; + rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt index ea42ae12d924..a9d7aa60558b 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt +++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt @@ -6,8 +6,8 @@ temperature monitoring, and uses a slightly different conversion formula for the charge counter. Required properties: -- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the - type of I2C chip attached. +- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also + indicates the type of I2C chip attached. - reg: The 7-bit I2C address. - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit negative value when the battery has been connected to the wrong end of the @@ -20,7 +20,7 @@ Required properties: Example from the Topic Miami Florida board: fuelgauge: ltc2943@64 { - compatible = "ltc2943"; + compatible = "lltc,ltc2943"; reg = <0x64>; lltc,resistor-sense = <15>; lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ diff --git a/Documentation/devicetree/bindings/power/supply/max8925_batter.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt index d7e3e0c0f71d..d7e3e0c0f71d 100644 --- a/Documentation/devicetree/bindings/power/supply/max8925_batter.txt +++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt diff --git a/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt b/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt deleted file mode 100644 index 16ea1d3b2e9e..000000000000 --- a/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt +++ /dev/null @@ -1,22 +0,0 @@ -Cortina Systems Gemini timer - -This timer is embedded in the Cortina Systems Gemini SoCs. - -Required properties: - -- compatible : Must be "cortina,gemini-timer" -- reg : Should contain registers location and length -- interrupts : Should contain the three timer interrupts with - flags for rising edge -- syscon : a phandle to the global Gemini system controller - -Example: - -timer@43000000 { - compatible = "cortina,gemini-timer"; - reg = <0x43000000 0x1000>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>, /* Timer 1 */ - <15 IRQ_TYPE_EDGE_RISING>, /* Timer 2 */ - <16 IRQ_TYPE_EDGE_RISING>; /* Timer 3 */ - syscon = <&syscon>; -}; diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt new file mode 100644 index 000000000000..b73ca6cd07f8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt @@ -0,0 +1,33 @@ +Faraday Technology timer + +This timer is a generic IP block from Faraday Technology, embedded in the +Cortina Systems Gemini SoCs and other designs. + +Required properties: + +- compatible : Must be one of + "faraday,fttmr010" + "cortina,gemini-timer" +- reg : Should contain registers location and length +- interrupts : Should contain the three timer interrupts usually with + flags for falling edge + +Optionally required properties: + +- clocks : a clock to provide the tick rate for "faraday,fttmr010" +- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer + and peripheral clock respectively, for "faraday,fttmr010" +- syscon : a phandle to the global Gemini system controller if the compatible + type is "cortina,gemini-timer" + +Example: + +timer@43000000 { + compatible = "faraday,fttmr010"; + reg = <0x43000000 0x1000>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ + <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ + <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ + clocks = <&extclk>, <&pclk>; + clock-names = "EXTCLK", "PCLK"; +}; diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt index a41b184d5538..16a5f4577a61 100644 --- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt +++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt @@ -1,9 +1,15 @@ Rockchip rk timer Required properties: -- compatible: shall be one of: - "rockchip,rk3288-timer" - for rk3066, rk3036, rk3188, rk322x, rk3288, rk3368 - "rockchip,rk3399-timer" - for rk3399 +- compatible: should be: + "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036 + "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066 + "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188 + "rockchip,rk3228-timer", "rockchip,rk3288-timer": for Rockchip RK3228 + "rockchip,rk3229-timer", "rockchip,rk3288-timer": for Rockchip RK3229 + "rockchip,rk3288-timer": for Rockchip RK3288 + "rockchip,rk3368-timer", "rockchip,rk3288-timer": for Rockchip RK3368 + "rockchip,rk3399-timer": for Rockchip RK3399 - reg: base address of the timer register starting with TIMERS CONTROL register - interrupts: should contain the interrupts for Timer0 - clocks : must contain an entry for each entry in clock-names diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ec0bfb9bbebd..830c9987fa02 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -265,6 +265,7 @@ sbs Smart Battery System schindler Schindler seagate Seagate Technology PLC semtech Semtech Corporation +sensirion Sensirion AG sgx SGX Sensortech sharp Sharp Corporation si-en Si-En Technology Ltd. diff --git a/Documentation/features/core/BPF-JIT/arch-support.txt b/Documentation/features/core/BPF-JIT/arch-support.txt index c1b4f917238f..5575d2d09625 100644 --- a/Documentation/features/core/BPF-JIT/arch-support.txt +++ b/Documentation/features/core/BPF-JIT/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index 6d930fcbe519..abb5f271a792 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | ok | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 136868b636e6..dbdaffcc5110 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index 728061d763b1..5e97a89420ef 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | ok | | c6x: | ok | | cris: | TODO | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 703f5784bc90..76bbd7fe27b3 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 38dea8eeba0a..830dbe801aaf 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 862e15d6f79e..0217bf6e942d 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | ok | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index 40f44d041fb4..f9133a921d5a 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index a44bfff6940b..529f66eda679 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | TODO | - | avr32: | ok | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index d87c1ce24204..43353242e439 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index b8999d8544ca..f559f1ba5416 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index 0fa423313409..d7acd7bd3619 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index d605c3fc38fd..53ed42b0e7e5 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 44cc1ff3f603..149443936de9 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/io/dma-api-debug/arch-support.txt b/Documentation/features/io/dma-api-debug/arch-support.txt index ffa522a9bdfd..6be920643be6 100644 --- a/Documentation/features/io/dma-api-debug/arch-support.txt +++ b/Documentation/features/io/dma-api-debug/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | ok | | cris: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 83d2cf989ea3..0eb08e1e32b8 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/io/sg-chain/arch-support.txt b/Documentation/features/io/sg-chain/arch-support.txt index 6ca98f9911bb..514ad3468aa5 100644 --- a/Documentation/features/io/sg-chain/arch-support.txt +++ b/Documentation/features/io/sg-chain/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/lib/strncasecmp/arch-support.txt b/Documentation/features/lib/strncasecmp/arch-support.txt index 12b1c9358e57..532c6f0fc15c 100644 --- a/Documentation/features/lib/strncasecmp/arch-support.txt +++ b/Documentation/features/lib/strncasecmp/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index d9c310889bc1..f3eec26c8cf8 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index cf90635bdcbb..9756abc680a7 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | ok | | blackfin: | ok | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index 68c3a5ddd9b9..62f4ee5c156c 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index e973b1a9572f..321b32f6e63c 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/locking/rwsem-optimized/arch-support.txt b/Documentation/features/locking/rwsem-optimized/arch-support.txt index ac93d7ab66c4..79bfa4d6e41f 100644 --- a/Documentation/features/locking/rwsem-optimized/arch-support.txt +++ b/Documentation/features/locking/rwsem-optimized/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 4660bf222db1..00f1606bbf45 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index f179b1fb26ef..7d516eacf7b9 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 85777c5c6353..f974b8df5d82 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index ac7cd6b1502b..1d3c0f669152 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -10,7 +10,6 @@ | arc: | .. | | arm: | .. | | arm64: | .. | - | avr32: | .. | | blackfin: | .. | | c6x: | .. | | cris: | .. | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index 4f66ec133951..a32d5b207679 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index 8acb439a4a17..caee8f64d1bc 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index ff670b2207f1..1cd87f6cd07d 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | ok | | blackfin: | ok | | c6x: | ok | | cris: | ok | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index a1e3eea7003f..e6d7c7b2253c 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 4199ffecc0ff..15c6071788ae 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt index 17f68a02e84d..baee7611ba3d 100644 --- a/Documentation/features/time/modern-timekeeping/arch-support.txt +++ b/Documentation/features/time/modern-timekeeping/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | TODO | | arm64: | ok | - | avr32: | ok | | blackfin: | TODO | | c6x: | ok | | cris: | TODO | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index cf3c3e383d15..9129530cb73c 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index ec4dd28e1297..f6829af3255f 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index 991974275a3e..1a09ea99d486 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index 523f8307b9cd..d170e6236503 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | .. | | blackfin: | .. | | c6x: | .. | | cris: | .. | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index 261b92e2fb1a..abfab4080a91 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | avr32: | .. | | blackfin: | TODO | | c6x: | .. | | cris: | .. | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index df1d1f3c9af2..f81f09b22b08 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 90c53749fde7..0cc3e11c42e2 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | TODO | | arm64: | TODO | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/features/vm/numa-memblock/arch-support.txt b/Documentation/features/vm/numa-memblock/arch-support.txt index e7c252a0c531..9a3fdac42ce1 100644 --- a/Documentation/features/vm/numa-memblock/arch-support.txt +++ b/Documentation/features/vm/numa-memblock/arch-support.txt @@ -10,7 +10,6 @@ | arc: | .. | | arm: | .. | | arm64: | .. | - | avr32: | .. | | blackfin: | .. | | c6x: | .. | | cris: | .. | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index 3de5434c857c..dfaa39e664ff 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | avr32: | TODO | | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index fdcfdd79682a..fe25787ff6d4 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -58,8 +58,7 @@ prototypes: int (*permission) (struct inode *, int, unsigned int); int (*get_acl)(struct inode *, int); int (*setattr) (struct dentry *, struct iattr *); - int (*getattr) (const struct path *, struct dentry *, struct kstat *, - u32, unsigned int); + int (*getattr) (const struct path *, struct kstat *, u32, unsigned int); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); void (*update_time)(struct inode *, struct timespec *, int); diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 95280079c0b3..5fb17f49f7a2 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -600,3 +600,9 @@ in your dentry operations instead. [recommended] ->readlink is optional for symlinks. Don't set, unless filesystem needs to fake something for readlink(2). +-- +[mandatory] + ->getattr() is now passed a struct path rather than a vfsmount and + dentry separately, and it now has request_mask and query_flags arguments + to specify the fields and sync type requested by statx. Filesystems not + supporting any statx-specific features may ignore the new arguments. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 569211703721..94dd27ef4a76 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -382,8 +382,7 @@ struct inode_operations { int (*permission) (struct inode *, int); int (*get_acl)(struct inode *, int); int (*setattr) (struct dentry *, struct iattr *); - int (*getattr) (const struct path *, struct dentry *, struct kstat *, - u32, unsigned int); + int (*getattr) (const struct path *, struct kstat *, u32, unsigned int); ssize_t (*listxattr) (struct dentry *, char *, size_t); void (*update_time)(struct inode *, struct timespec *, int); int (*atomic_open)(struct inode *, struct dentry *, struct file *, diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho new file mode 100644 index 000000000000..7cfb34977460 --- /dev/null +++ b/Documentation/hwmon/aspeed-pwm-tacho @@ -0,0 +1,22 @@ +Kernel driver aspeed-pwm-tacho +============================== + +Supported chips: + ASPEED AST2400/2500 + +Authors: + <jaghu@google.com> + +Description: +------------ +This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho +controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho +controller supports up to 16 tachometer inputs. + +The driver provides the following sensor accesses in sysfs: + +fanX_input ro provide current fan rotation value in RPM as reported + by the fan to the device. + +pwmX rw get or set PWM fan control value. This is an integer + value between 0(off) and 255(full speed). diff --git a/Documentation/hwmon/tc654 b/Documentation/hwmon/tc654 index 91a2843f5f98..47636a8077b4 100644 --- a/Documentation/hwmon/tc654 +++ b/Documentation/hwmon/tc654 @@ -2,7 +2,7 @@ Kernel driver tc654 =================== Supported chips: - * Microship TC654 and TC655 + * Microchip TC654 and TC655 Prefix: 'tc654' Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf diff --git a/Documentation/lightnvm/pblk.txt b/Documentation/lightnvm/pblk.txt new file mode 100644 index 000000000000..1040ed1cec81 --- /dev/null +++ b/Documentation/lightnvm/pblk.txt @@ -0,0 +1,21 @@ +pblk: Physical Block Device Target +================================== + +pblk implements a fully associative, host-based FTL that exposes a traditional +block I/O interface. Its primary responsibilities are: + + - Map logical addresses onto physical addresses (4KB granularity) in a + logical-to-physical (L2P) table. + - Maintain the integrity and consistency of the L2P table as well as its + recovery from normal tear down and power outage. + - Deal with controller- and media-specific constrains. + - Handle I/O errors. + - Implement garbage collection. + - Maintain consistency across the I/O stack during synchronization points. + +For more information please refer to: + + http://lightnvm.io + +which maintains updated FAQs, manual pages, technical documentation, tools, +contacts, etc. diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst index ba0c15dd092c..79d09e423700 100644 --- a/Documentation/media/v4l-drivers/soc-camera.rst +++ b/Documentation/media/v4l-drivers/soc-camera.rst @@ -12,7 +12,7 @@ The following terms are used in this document: control and configuration, and a parallel or a serial bus for data. - camera host - an interface, to which a camera is connected. Typically a specialised interface, present on many SoCs, e.g. PXA27x and PXA3xx, SuperH, - AVR32, i.MX27, i.MX31. + i.MX27, i.MX31. - camera host bus - a connection between a camera host and a camera. Can be parallel or serial, consists of data and control lines, e.g. clock, vertical and horizontal synchronization signals. diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 54bd5faa8782..f2af35f6d6b2 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -77,9 +77,15 @@ static struct pinctrl_desc foo_desc = { int __init foo_probe(void) { + int error; + struct pinctrl_dev *pctl; - return pinctrl_register_and_init(&foo_desc, <PARENT>, NULL, &pctl); + error = pinctrl_register_and_init(&foo_desc, <PARENT>, NULL, &pctl); + if (error) + return error; + + return pinctrl_enable(pctl); } To enable the pinctrl subsystem and the subgroups for PINMUX and PINCONF and diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 64546eb9a16a..ee69d7532172 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -478,15 +478,23 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: - set the power.last_busy field to the current time void pm_runtime_use_autosuspend(struct device *dev); - - set the power.use_autosuspend flag, enabling autosuspend delays + - set the power.use_autosuspend flag, enabling autosuspend delays; call + pm_runtime_get_sync if the flag was previously cleared and + power.autosuspend_delay is negative void pm_runtime_dont_use_autosuspend(struct device *dev); - - clear the power.use_autosuspend flag, disabling autosuspend delays + - clear the power.use_autosuspend flag, disabling autosuspend delays; + decrement the device's usage counter if the flag was previously set and + power.autosuspend_delay is negative; call pm_runtime_idle void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); - set the power.autosuspend_delay value to 'delay' (expressed in milliseconds); if 'delay' is negative then runtime suspends are - prevented + prevented; if power.use_autosuspend is set, pm_runtime_get_sync may be + called or the device's usage counter may be decremented and + pm_runtime_idle called depending on if power.autosuspend_delay is + changed to or from a negative value; if power.use_autosuspend is clear, + pm_runtime_idle is called unsigned long pm_runtime_autosuspend_expiration(struct device *dev); - calculate the time when the current autosuspend delay period will expire, @@ -836,9 +844,8 @@ of the non-autosuspend counterparts: Instead of: pm_runtime_put_sync use: pm_runtime_put_sync_autosuspend. Drivers may also continue to use the non-autosuspend helper functions; they -will behave normally, not taking the autosuspend delay into account. -Similarly, if the power.use_autosuspend field isn't set then the autosuspend -helper functions will behave just like the non-autosuspend counterparts. +will behave normally, which means sometimes taking the autosuspend delay into +account (see pm_runtime_idle). Under some circumstances a driver or subsystem may want to prevent a device from autosuspending immediately, even though the usage counter is zero and the diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst index 11ec2d93a5e0..61e9c78bd6d1 100644 --- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -124,7 +124,7 @@ specified in the following format in the sign-off area: .. code-block:: none - Cc: <stable@vger.kernel.org> # 3.3.x- + Cc: <stable@vger.kernel.org> # 3.3.x The tag has the meaning of: diff --git a/Documentation/scheduler/sched-pelt.c b/Documentation/scheduler/sched-pelt.c new file mode 100644 index 000000000000..e4219139386a --- /dev/null +++ b/Documentation/scheduler/sched-pelt.c @@ -0,0 +1,108 @@ +/* + * The following program is used to generate the constants for + * computing sched averages. + * + * ============================================================== + * C program (compile with -lm) + * ============================================================== + */ + +#include <math.h> +#include <stdio.h> + +#define HALFLIFE 32 +#define SHIFT 32 + +double y; + +void calc_runnable_avg_yN_inv(void) +{ + int i; + unsigned int x; + + printf("static const u32 runnable_avg_yN_inv[] = {"); + for (i = 0; i < HALFLIFE; i++) { + x = ((1UL<<32)-1)*pow(y, i); + + if (i % 6 == 0) printf("\n\t"); + printf("0x%8x, ", x); + } + printf("\n};\n\n"); +} + +int sum = 1024; + +void calc_runnable_avg_yN_sum(void) +{ + int i; + + printf("static const u32 runnable_avg_yN_sum[] = {\n\t 0,"); + for (i = 1; i <= HALFLIFE; i++) { + if (i == 1) + sum *= y; + else + sum = sum*y + 1024*y; + + if (i % 11 == 0) + printf("\n\t"); + + printf("%5d,", sum); + } + printf("\n};\n\n"); +} + +int n = -1; +/* first period */ +long max = 1024; + +void calc_converged_max(void) +{ + long last = 0, y_inv = ((1UL<<32)-1)*y; + + for (; ; n++) { + if (n > -1) + max = ((max*y_inv)>>SHIFT) + 1024; + /* + * This is the same as: + * max = max*y + 1024; + */ + + if (last == max) + break; + + last = max; + } + n--; + printf("#define LOAD_AVG_PERIOD %d\n", HALFLIFE); + printf("#define LOAD_AVG_MAX %ld\n", max); +// printf("#define LOAD_AVG_MAX_N %d\n\n", n); +} + +void calc_accumulated_sum_32(void) +{ + int i, x = sum; + + printf("static const u32 __accumulated_sum_N32[] = {\n\t 0,"); + for (i = 1; i <= n/HALFLIFE+1; i++) { + if (i > 1) + x = x/2 + sum; + + if (i % 6 == 0) + printf("\n\t"); + + printf("%6d,", x); + } + printf("\n};\n\n"); +} + +void main(void) +{ + printf("/* Generated by Documentation/scheduler/sched-pelt; do not modify. */\n\n"); + + y = pow(0.5, 1/(double)HALFLIFE); + + calc_runnable_avg_yN_inv(); +// calc_runnable_avg_yN_sum(); + calc_converged_max(); +// calc_accumulated_sum_32(); +} diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt index 41ef9d8efe95..5ea85059db3b 100644 --- a/Documentation/trace/kprobetrace.txt +++ b/Documentation/trace/kprobetrace.txt @@ -8,8 +8,9 @@ Overview -------- These events are similar to tracepoint based events. Instead of Tracepoint, this is based on kprobes (kprobe and kretprobe). So it can probe wherever -kprobes can probe (this means, all functions body except for __kprobes -functions). Unlike the Tracepoint based event, this can be added and removed +kprobes can probe (this means, all functions except those with +__kprobes/nokprobe_inline annotation and those marked NOKPROBE_SYMBOL). +Unlike the Tracepoint based event, this can be added and removed dynamically, on the fly. To enable this feature, build your kernel with CONFIG_KPROBE_EVENTS=y. diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt index 76e61c883347..b2f60ca8b60c 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt @@ -83,6 +83,12 @@ Groups: Bits for undefined preemption levels are RAZ/WI. + For historical reasons and to provide ABI compatibility with userspace we + export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask + field in the lower 5 bits of a word, meaning that userspace must always + use the lower 5 bits to communicate with the KVM device and must shift the + value left by 3 places to obtain the actual priority mask level. + Limitations: - Priorities are not implemented, and registers are RAZ/WI - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2. diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index b8527c6b7646..97b7adbceda4 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -27,7 +27,7 @@ Offset Proto Name Meaning 1C0/020 ALL efi_info EFI 32 information (struct efi_info) 1E0/004 ALL alk_mem_k Alternative mem check, in KB 1E4/004 ALL scratch Scratch field for the kernel setup code -1E8/001 ALL e820_entries Number of entries in e820_map (below) +1E8/001 ALL e820_entries Number of entries in e820_table (below) 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) 1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer (below) @@ -35,6 +35,6 @@ Offset Proto Name Meaning 1EC/001 ALL secure_boot Secure boot is enabled in the firmware 1EF/001 ALL sentinel Used to detect broken bootloaders 290/040 ALL edd_mbr_sig_buffer EDD MBR signatures -2D0/A00 ALL e820_map E820 memory map table - (array of struct e820entry) +2D0/A00 ALL e820_table E820 memory map table + (array of struct e820_entry) D00/1EC ALL eddbuf EDD data (array of struct edd_info) |