diff options
Diffstat (limited to 'Documentation')
9 files changed, 178 insertions, 1 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-input-axp-pek b/Documentation/ABI/testing/sysfs-driver-input-axp-pek new file mode 100644 index 000000000000..a5e671b9fa79 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-input-axp-pek @@ -0,0 +1,11 @@ +What: /sys/class/input/input(x)/device/startup +Date: March 2014 +Contact: Carlo Caione <carlo@caione.org> +Description: Startup time in us. Board is powered on if the button is pressed + for more than <startup_time> + +What: /sys/class/input/input(x)/device/shutdown +Date: March 2014 +Contact: Carlo Caione <carlo@caione.org> +Description: Shutdown time in us. Board is powered off if the button is pressed + for more than <shutdown_time> diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt new file mode 100644 index 000000000000..751665e8e47a --- /dev/null +++ b/Documentation/devicetree/bindings/input/e3x0-button.txt @@ -0,0 +1,25 @@ +National Instruments Ettus Research USRP E3x0 button driver + +This module is part of the NI Ettus Research USRP E3x0 SDR. + +This module provides a simple power button event via two interrupts. + +Required properties: +- compatible: should be one of the following + - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0 +- interrupt-parent: + - a phandle to the interrupt controller that it is attached to. +- interrupts: should be one of the following + - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0 +- interrupt-names: should be one of the following + - "press", "release": For devices such as the NI Ettus Research USRP E3x0 + +Note: Interrupt numbers might vary depending on the FPGA configuration. + +Example: + button { + compatible = "ettus,e3x0-button"; + interrupt-parent = <&intc>; + interrupts = <0 30 1>, <0 31 1>; + interrupt-names = "press", "release"; + } diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt new file mode 100644 index 000000000000..3ed1c7eb2f97 --- /dev/null +++ b/Documentation/devicetree/bindings/input/regulator-haptic.txt @@ -0,0 +1,21 @@ +* Regulator Haptic Device Tree Bindings + +Required Properties: + - compatible : Should be "regulator-haptic" + - haptic-supply : Power supply to the haptic motor. + [*] refer Documentation/devicetree/bindings/regulator/regulator.txt + + - max-microvolt : The maximum voltage value supplied to the haptic motor. + [The unit of the voltage is a micro] + + - min-microvolt : The minimum voltage value supplied to the haptic motor. + [The unit of the voltage is a micro] + +Example: + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_regulator>; + max-microvolt = <2700000>; + min-microvolt = <1100000>; + }; diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt new file mode 100644 index 000000000000..b9c32f6fd687 --- /dev/null +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -0,0 +1,62 @@ +Allwinner sun4i low res adc attached tablet keys +------------------------------------------------ + +Required properties: + - compatible: "allwinner,sun4i-a10-lradc-keys" + - reg: mmio address range of the chip + - interrupts: interrupt to which the chip is connected + - vref-supply: powersupply for the lradc reference voltage + +Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": + +Required subnode-properties: + - label: Descriptive name of the key. + - linux,code: Keycode to emit. + - channel: Channel this key is attached to, mut be 0 or 1. + - voltage: Voltage in µV at lradc input when this key is pressed. + +Example: + +#include <dt-bindings/input/input.h> + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + vref-supply = <®_vcc3v0>; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt index aef57791f40b..433332d3b2ba 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt @@ -2,9 +2,10 @@ sun4i resistive touchscreen controller -------------------------------------- Required properties: - - compatible: "allwinner,sun4i-a10-ts" + - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts" - reg: mmio address range of the chip - interrupts: interrupt to which the chip is connected + - #thermal-sensor-cells: shall be 0 Optional properties: - allwinner,ts-attached: boolean indicating that an actual touchscreen is @@ -17,4 +18,5 @@ Example: reg = <0x01c25000 0x100>; interrupts = <29>; allwinner,ts-attached; + #thermal-sensor-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt index 878549ba814d..6c4fb34823d3 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -28,6 +28,20 @@ Required properties: ti,adc-channels: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. +Optional properties: +- child "tsc" + ti,charge-delay: Length of touch screen charge delay step in terms of + ADC clock cycles. Charge delay value should be large + in order to avoid false pen-up events. This value + effects the overall sampling speed, hence need to be + kept as low as possible, while avoiding false pen-up + event. Start from a lower value, say 0x400, and + increase value until false pen-up events are avoided. + The pen-up detection happens immediately after the + charge step, so this does in fact function as a + hardware knob for adjusting the amount of "settling + time". + Example: tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; @@ -36,6 +50,7 @@ Example: ti,x-plate-resistance = <200>; ti,coordiante-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; }; adc { diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt new file mode 100644 index 000000000000..e30e0b93f2b3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt @@ -0,0 +1,17 @@ +Texas Instruments TPS65218 power button + +This driver provides a simple power button event via an Interrupt. + +Required properties: +- compatible: should be "ti,tps65218-pwrbutton" +- interrupts: should be one of the following + - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218 + +Example: + +&tps { + power-button { + compatible = "ti,tps65218-pwrbutton"; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; +}; diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt new file mode 100644 index 000000000000..362a76925bcd --- /dev/null +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -0,0 +1,23 @@ +* Device tree bindings for Allwinner A10, A20 PS2 host controller + +A20 PS2 is dual role controller (PS2 host and PS2 device). These bindings are +for PS2 A10/A20 host controller. IBM compliant IBM PS2 and AT-compatible keyboard +and mouse can be connected. + +Required properties: + + - reg : Offset and length of the register set for the device. + - compatible : Should be as of the following: + - "allwinner,sun4i-a10-ps2" + - interrupts : The interrupt line connected to the PS2. + - clocks : The gate clk connected to the PS2. + + +Example: + ps20: ps2@0x01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <0 62 4>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d443279c95dc..96a17541391e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -54,6 +54,7 @@ epcos EPCOS AG epfl Ecole Polytechnique Fédérale de Lausanne epson Seiko Epson Corp. est ESTeem Wireless Modems +ettus NI Ettus Research eukrea Eukréa Electromatique everest Everest Semiconductor Co. Ltd. excito Excito |