diff options
Diffstat (limited to 'Documentation')
15 files changed, 22 insertions, 36 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index d7f30902fda0..426fa892d311 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5331,6 +5331,8 @@ rodata= [KNL] on Mark read-only kernel memory as read-only (default). off Leave read-only kernel memory writable for debugging. + full Mark read-only kernel memory and aliases as read-only + [arm64] rockchip.usb_uart Enable the uart passthrough on the designated usb port diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 805f2281e000..60d44165fba7 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -271,7 +271,7 @@ poll cycle or the number of packets processed reaches netdev_budget. netdev_max_backlog ------------------ -Maximum number of packets, queued on the INPUT side, when the interface +Maximum number of packets, queued on the INPUT side, when the interface receives packets faster than kernel can process them. netdev_rss_key diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst index 52b75a25c205..311021f2e560 100644 --- a/Documentation/arm64/elf_hwcaps.rst +++ b/Documentation/arm64/elf_hwcaps.rst @@ -242,44 +242,34 @@ HWCAP2_MTE3 by Documentation/arm64/memory-tagging-extension.rst. HWCAP2_SME - Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described by Documentation/arm64/sme.rst. HWCAP2_SME_I16I64 - Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111. HWCAP2_SME_F64F64 - Functionality implied by ID_AA64SMFR0_EL1.F64F64 == 0b1. HWCAP2_SME_I8I32 - Functionality implied by ID_AA64SMFR0_EL1.I8I32 == 0b1111. HWCAP2_SME_F16F32 - Functionality implied by ID_AA64SMFR0_EL1.F16F32 == 0b1. HWCAP2_SME_B16F32 - Functionality implied by ID_AA64SMFR0_EL1.B16F32 == 0b1. HWCAP2_SME_F32F32 - Functionality implied by ID_AA64SMFR0_EL1.F32F32 == 0b1. HWCAP2_SME_FA64 - Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1. HWCAP2_WFXT - Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010. HWCAP2_EBF16 - Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010. 4. Unused AT_HWCAP bits diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 33b04db8408f..fda97b3fcf01 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -52,6 +52,8 @@ stable kernels. | Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2457168 | ARM64_ERRATUM_2457168 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2064142 | ARM64_ERRATUM_2064142 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2038923 | ARM64_ERRATUM_2038923 | diff --git a/Documentation/atomic_bitops.txt b/Documentation/atomic_bitops.txt index 093cdaefdb37..edea4656c5c0 100644 --- a/Documentation/atomic_bitops.txt +++ b/Documentation/atomic_bitops.txt @@ -58,13 +58,11 @@ Like with atomic_t, the rule of thumb is: - RMW operations that have a return value are fully ordered. - - RMW operations that are conditional are unordered on FAILURE, - otherwise the above rules apply. In the case of test_and_{}_bit() operations, - if the bit in memory is unchanged by the operation then it is deemed to have - failed. + - RMW operations that are conditional are fully ordered. -Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics and -clear_bit_unlock() which has RELEASE semantics. +Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics, +clear_bit_unlock() which has RELEASE semantics and test_bit_acquire which has +ACQUIRE semantics. Since a platform only has a single means of achieving atomic operations the same barriers as for atomic_t are used, see atomic_t.txt. diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 4a92a4c7dcd7..f8168986a0a9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -233,6 +233,7 @@ allOf: - allwinner,sun8i-a83t-tcon-lcd - allwinner,sun8i-v3s-tcon - allwinner,sun9i-a80-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: properties: @@ -252,6 +253,7 @@ allOf: - allwinner,sun8i-a83t-tcon-tv - allwinner,sun8i-r40-tcon-tv - allwinner,sun9i-a80-tcon-tv + - allwinner,sun20i-d1-tcon-tv then: properties: @@ -278,6 +280,7 @@ allOf: - allwinner,sun9i-a80-tcon-lcd - allwinner,sun4i-a10-tcon - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: required: @@ -294,6 +297,7 @@ allOf: - allwinner,sun8i-a23-tcon - allwinner,sun8i-a33-tcon - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: properties: diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt index e6cb2291471c..7ae8aa148634 100644 --- a/Documentation/devicetree/bindings/net/qcom-emac.txt +++ b/Documentation/devicetree/bindings/net/qcom-emac.txt @@ -14,7 +14,7 @@ MAC node: - mac-address : The 6-byte MAC address. If present, it is the default MAC address. - internal-phy : phandle to the internal PHY node -- phy-handle : phandle the external PHY node +- phy-handle : phandle to the external PHY node Internal PHY node: - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii". diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index b539781e39aa..835b53302db8 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -47,12 +47,6 @@ properties: description: Properties for single LDO regulator. - properties: - regulator-name: - pattern: "^LDO[1-5]$" - description: - should be "LDO1", ..., "LDO5" - unevaluatedProperties: false "^BUCK[1-6]$": @@ -62,11 +56,6 @@ properties: Properties for single BUCK regulator. properties: - regulator-name: - pattern: "^BUCK[1-6]$" - description: - should be "BUCK1", ..., "BUCK6" - nxp,dvs-run-voltage: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 600000 diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml index 553601a441a7..510b82c177c0 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml @@ -10,7 +10,7 @@ description: See spi-peripheral-props.yaml for more info. maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Vaishnav Achath <vaishnav.a@ti.com> properties: # cdns,qspi-nor.yaml diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 0a537fa3a641..4707294d8f59 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence Quad SPI controller maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Vaishnav Achath <vaishnav.a@ti.com> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index ce048e782e80..a4abe1588005 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -16,7 +16,7 @@ description: their own separate schema that should be referenced from here. maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Mark Brown <broonie@kernel.org> properties: reg: diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 00dcbdd36144..119998d10ff4 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -42,7 +42,7 @@ properties: description: Address ranges of the thermal registers. If more then one range is given the first one must be the common registers followed by each sensor - according the datasheet. + according to the datasheet. minItems: 1 maxItems: 4 diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 2d34f3ccb257..8d2c6d74b605 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -214,6 +214,7 @@ patternProperties: - polling-delay - polling-delay-passive - thermal-sensors + - trips additionalProperties: false diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 7fb398649f51..858ed5d80def 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -525,8 +525,8 @@ followed by a test macro:: If you need to expose a compiler capability to makefiles and/or C source files, `CC_HAS_` is the recommended prefix for the config option:: - config CC_HAS_ASM_GOTO - def_bool $(success,$(srctree)/scripts/gcc-goto.sh $(CC)) + config CC_HAS_FOO + def_bool $(success,$(srctree)/scripts/cc-check-foo.sh $(CC)) Build as module only ~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index e12eae1f3301..6bf7f0ca4556 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -33,7 +33,7 @@ EXAMPLE ======= In the example below, **rtla timerlat hist** is set to run for *10* minutes, in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat -hist** will change the priority of the *timelat* threads to run under +hist** will change the priority of the *timerlat* threads to run under *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The *1ms* period is also passed to the *timerlat* tracer:: |