diff options
Diffstat (limited to 'Documentation')
7 files changed, 86 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 31b35c3a5e47..3404afa9b938 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -9,8 +9,12 @@ Device Tree Bindings for the Arasan SDHCI Controller [4] Documentation/devicetree/bindings/phy/phy-bindings.txt Required Properties: - - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or - 'arasan,sdhci-4.9a' or 'arasan,sdhci-5.1' + - compatible: Compatibility string. One of: + - "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY + - "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY + - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY + - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY + For this device it is strongly suggested to include arasan,soc-ctl-syscon. - reg: From mmc bindings: Register location and length. - clocks: From clock bindings: Handles to clock inputs. - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" @@ -22,6 +26,17 @@ Required Properties for "arasan,sdhci-5.1": - phys: From PHY bindings: Phandle for the Generic PHY for arasan. - phy-names: MUST be "phy_arasan". +Optional Properties: + - arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt) + used to access core corecfg registers. Offsets of registers in this + syscon are determined based on the main compatible string for the device. + - clock-output-names: If specified, this will be the name of the card clock + which will be exposed by this device. Required if #clock-cells is + specified. + - #clock-cells: If specified this should be the value <0>. With this property + in place we will export a clock representing the Card Clock. This clock + is expected to be consumed by our PHY. You must also specify + Example: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; @@ -42,3 +57,19 @@ Example: phys = <&emmc_phy>; phy-names = "phy_arasan"; } ; + + sdhci: sdhci@fe330000 { + compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; + reg = <0x0 0xfe330000 0x0 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; + clock-names = "clk_xin", "clk_ahb"; + arasan,soc-ctl-syscon = <&grf>; + assigned-clocks = <&cru SCLK_EMMC>; + assigned-clock-rates = <200000000>; + clock-output-names = "emmc_cardclock"; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + #clock-cells = <0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt deleted file mode 100644 index 59476fbdbfa1..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt +++ /dev/null @@ -1,18 +0,0 @@ -Broadcom BCM2835 SDHCI controller - -This file documents differences between the core properties described -by mmc.txt and the properties that represent the BCM2835 controller. - -Required properties: -- compatible : Should be "brcm,bcm2835-sdhci". -- clocks : The clock feeding the SDHCI controller. - -Example: - -sdhci: sdhci { - compatible = "brcm,bcm2835-sdhci"; - reg = <0x7e300000 0x100>; - interrupts = <2 30>; - clocks = <&clk_mmc>; - bus-width = <4>; -}; diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt new file mode 100644 index 000000000000..82847174c37d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt @@ -0,0 +1,36 @@ +* BROADCOM BRCMSTB/BMIPS SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-brcmstb driver. + +NOTE: The driver disables all UHS speed modes by default and depends +on Device Tree properties to enable them for SoC/Board combinations +that support them. + +Required properties: +- compatible: "brcm,bcm7425-sdhci" + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + + sdhci@f03e0100 { + compatible = "brcm,bcm7425-sdhci"; + reg = <0xf03e0000 0x100>; + interrupts = <0x0 0x26 0x0>; + sdhci,auto-cmd12; + clocks = <&sw_sdio>; + sd-uhs-sdr50; + sd-uhs-ddr50; + }; + + sdhci@f03e0300 { + non-removable; + bus-width = <0x8>; + compatible = "brcm,bcm7425-sdhci"; + reg = <0xf03e0200 0x100>; + interrupts = <0x0 0x27 0x0>; + sdhci,auto-cmd12; + clocks = <sw_sdio>; + mmc-hs200-1_8v; + }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index dca56d6248f5..3e29050ec769 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -28,6 +28,8 @@ Optional properties: transparent level shifters on the outputs of the controller. Two cells are required, first cell specifies minimum slot voltage (mV), second cell specifies maximum slot voltage (mV). Several ranges could be specified. +- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19 + in tuning procedure. - fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure. The uSDHC use one delay cell as default increasing step to do tuning process. This property allows user to change the tuning step to more than one delay diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index ed23b9bedfdc..22d1e1f3f38b 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -46,8 +46,12 @@ Optional properties: - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported +- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported - dsr: Value the card's (optional) Driver Stage Register (DSR) should be programmed with. Valid range: [0 .. 0xffff]. +- no-sdio: controller is limited to send sdio cmd during initialization +- no-sd: controller is limited to send sd cmd during initialization +- no-mmc: controller is limited to send mmc cmd during initialization *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 555cb0f40690..e3ea55763b0a 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -7,6 +7,13 @@ Required properties: - reg: PHY register address offset and length in "general register files" +Optional clocks using the clock bindings (see ../clock/clock-bindings.txt), +specified by name: + - clock-names: Should contain "emmcclk". Although this is listed as optional + (because most boards can get basic functionality without having + access to it), it is strongly suggested. + - clocks: Should have a phandle to the card clock exported by the SDHCI driver. + Example: @@ -20,6 +27,8 @@ grf: syscon@ff770000 { emmcphy: phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; reg = <0xf780 0x20>; + clocks = <&sdhci>; + clock-names = "emmcclk"; #phy-cells = <0>; }; }; diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt index caa555706f89..404a0e9e92b0 100644 --- a/Documentation/mmc/mmc-dev-attrs.txt +++ b/Documentation/mmc/mmc-dev-attrs.txt @@ -28,6 +28,8 @@ All attributes are read-only. preferred_erase_size Preferred erase size raw_rpmb_size_mult RPMB partition size rel_sectors Reliable write sector count + ocr Operation Conditions Register + dsr Driver Stage Register Note on Erase Size and Preferred Erase Size: |