diff options
Diffstat (limited to 'Documentation/networking/tls.rst')
| -rw-r--r-- | Documentation/networking/tls.rst | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/Documentation/networking/tls.rst b/Documentation/networking/tls.rst new file mode 100644 index 000000000000..5bcbf75e2025 --- /dev/null +++ b/Documentation/networking/tls.rst @@ -0,0 +1,215 @@ +.. _kernel_tls: + +========== +Kernel TLS +========== + +Overview +======== + +Transport Layer Security (TLS) is a Upper Layer Protocol (ULP) that runs over +TCP. TLS provides end-to-end data integrity and confidentiality. + +User interface +============== + +Creating a TLS connection +------------------------- + +First create a new TCP socket and set the TLS ULP. + +.. code-block:: c + + sock = socket(AF_INET, SOCK_STREAM, 0); + setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls")); + +Setting the TLS ULP allows us to set/get TLS socket options. Currently +only the symmetric encryption is handled in the kernel. After the TLS +handshake is complete, we have all the parameters required to move the +data-path to the kernel. There is a separate socket option for moving +the transmit and the receive into the kernel. + +.. code-block:: c + + /* From linux/tls.h */ + struct tls_crypto_info { + unsigned short version; + unsigned short cipher_type; + }; + + struct tls12_crypto_info_aes_gcm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_AES_GCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_AES_GCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_AES_GCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE]; + }; + + + struct tls12_crypto_info_aes_gcm_128 crypto_info; + + crypto_info.info.version = TLS_1_2_VERSION; + crypto_info.info.cipher_type = TLS_CIPHER_AES_GCM_128; + memcpy(crypto_info.iv, iv_write, TLS_CIPHER_AES_GCM_128_IV_SIZE); + memcpy(crypto_info.rec_seq, seq_number_write, + TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE); + memcpy(crypto_info.key, cipher_key_write, TLS_CIPHER_AES_GCM_128_KEY_SIZE); + memcpy(crypto_info.salt, implicit_iv_write, TLS_CIPHER_AES_GCM_128_SALT_SIZE); + + setsockopt(sock, SOL_TLS, TLS_TX, &crypto_info, sizeof(crypto_info)); + +Transmit and receive are set separately, but the setup is the same, using either +TLS_TX or TLS_RX. + +Sending TLS application data +---------------------------- + +After setting the TLS_TX socket option all application data sent over this +socket is encrypted using TLS and the parameters provided in the socket option. +For example, we can send an encrypted hello world record as follows: + +.. code-block:: c + + const char *msg = "hello world\n"; + send(sock, msg, strlen(msg)); + +send() data is directly encrypted from the userspace buffer provided +to the encrypted kernel send buffer if possible. + +The sendfile system call will send the file's data over TLS records of maximum +length (2^14). + +.. code-block:: c + + file = open(filename, O_RDONLY); + fstat(file, &stat); + sendfile(sock, file, &offset, stat.st_size); + +TLS records are created and sent after each send() call, unless +MSG_MORE is passed. MSG_MORE will delay creation of a record until +MSG_MORE is not passed, or the maximum record size is reached. + +The kernel will need to allocate a buffer for the encrypted data. +This buffer is allocated at the time send() is called, such that +either the entire send() call will return -ENOMEM (or block waiting +for memory), or the encryption will always succeed. If send() returns +-ENOMEM and some data was left on the socket buffer from a previous +call using MSG_MORE, the MSG_MORE data is left on the socket buffer. + +Receiving TLS application data +------------------------------ + +After setting the TLS_RX socket option, all recv family socket calls +are decrypted using TLS parameters provided. A full TLS record must +be received before decryption can happen. + +.. code-block:: c + + char buffer[16384]; + recv(sock, buffer, 16384); + +Received data is decrypted directly in to the user buffer if it is +large enough, and no additional allocations occur. If the userspace +buffer is too small, data is decrypted in the kernel and copied to +userspace. + +``EINVAL`` is returned if the TLS version in the received message does not +match the version passed in setsockopt. + +``EMSGSIZE`` is returned if the received message is too big. + +``EBADMSG`` is returned if decryption failed for any other reason. + +Send TLS control messages +------------------------- + +Other than application data, TLS has control messages such as alert +messages (record type 21) and handshake messages (record type 22), etc. +These messages can be sent over the socket by providing the TLS record type +via a CMSG. For example the following function sends @data of @length bytes +using a record of type @record_type. + +.. code-block:: c + + /* send TLS control message using record_type */ + static int klts_send_ctrl_message(int sock, unsigned char record_type, + void *data, size_t length) + { + struct msghdr msg = {0}; + int cmsg_len = sizeof(record_type); + struct cmsghdr *cmsg; + char buf[CMSG_SPACE(cmsg_len)]; + struct iovec msg_iov; /* Vector of data to send/receive into. */ + + msg.msg_control = buf; + msg.msg_controllen = sizeof(buf); + cmsg = CMSG_FIRSTHDR(&msg); + cmsg->cmsg_level = SOL_TLS; + cmsg->cmsg_type = TLS_SET_RECORD_TYPE; + cmsg->cmsg_len = CMSG_LEN(cmsg_len); + *CMSG_DATA(cmsg) = record_type; + msg.msg_controllen = cmsg->cmsg_len; + + msg_iov.iov_base = data; + msg_iov.iov_len = length; + msg.msg_iov = &msg_iov; + msg.msg_iovlen = 1; + + return sendmsg(sock, &msg, 0); + } + +Control message data should be provided unencrypted, and will be +encrypted by the kernel. + +Receiving TLS control messages +------------------------------ + +TLS control messages are passed in the userspace buffer, with message +type passed via cmsg. If no cmsg buffer is provided, an error is +returned if a control message is received. Data messages may be +received without a cmsg buffer set. + +.. code-block:: c + + char buffer[16384]; + char cmsg[CMSG_SPACE(sizeof(unsigned char))]; + struct msghdr msg = {0}; + msg.msg_control = cmsg; + msg.msg_controllen = sizeof(cmsg); + + struct iovec msg_iov; + msg_iov.iov_base = buffer; + msg_iov.iov_len = 16384; + + msg.msg_iov = &msg_iov; + msg.msg_iovlen = 1; + + int ret = recvmsg(sock, &msg, 0 /* flags */); + + struct cmsghdr *cmsg = CMSG_FIRSTHDR(&msg); + if (cmsg->cmsg_level == SOL_TLS && + cmsg->cmsg_type == TLS_GET_RECORD_TYPE) { + int record_type = *((unsigned char *)CMSG_DATA(cmsg)); + // Do something with record_type, and control message data in + // buffer. + // + // Note that record_type may be == to application data (23). + } else { + // Buffer contains application data. + } + +recv will never return data from mixed types of TLS records. + +Integrating in to userspace TLS library +--------------------------------------- + +At a high level, the kernel TLS ULP is a replacement for the record +layer of a userspace TLS library. + +A patchset to OpenSSL to use ktls as the record layer is +`here <https://github.com/Mellanox/openssl/commits/tls_rx2>`_. + +`An example <https://github.com/ktls/af_ktls-tool/commits/RX>`_ +of calling send directly after a handshake using gnutls. +Since it doesn't implement a full record layer, control +messages are not supported. |