diff options
Diffstat (limited to 'Documentation/filesystems')
| -rw-r--r-- | Documentation/filesystems/debugfs.txt | 4 | ||||
| -rw-r--r-- | Documentation/filesystems/ext4.txt | 10 | ||||
| -rw-r--r-- | Documentation/filesystems/jfs.txt | 19 | ||||
| -rw-r--r-- | Documentation/filesystems/nfs/nfs.txt | 44 | ||||
| -rw-r--r-- | Documentation/filesystems/nfs/nfsd-admin-interfaces.txt | 41 | ||||
| -rw-r--r-- | Documentation/filesystems/nfs/nfsroot.txt | 10 | ||||
| -rw-r--r-- | Documentation/filesystems/proc.txt | 22 |
7 files changed, 122 insertions, 28 deletions
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt index 7a34f827989c..3a863f692728 100644 --- a/Documentation/filesystems/debugfs.txt +++ b/Documentation/filesystems/debugfs.txt @@ -15,8 +15,8 @@ Debugfs is typically mounted with a command like: mount -t debugfs none /sys/kernel/debug (Or an equivalent /etc/fstab line). -The debugfs root directory is accessible by anyone by default. To -restrict access to the tree the "uid", "gid" and "mode" mount +The debugfs root directory is accessible only to the root user by +default. To change access to the tree the "uid", "gid" and "mode" mount options can be used. Note that the debugfs API is exported GPL-only to modules. diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 1b7f9acbcbbe..104322bf378c 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -375,6 +375,16 @@ dioread_nolock locking. If the dioread_nolock option is specified Because of the restrictions this options comprises it is off by default (e.g. dioread_lock). +max_dir_size_kb=n This limits the size of directories so that any + attempt to expand them beyond the specified + limit in kilobytes will cause an ENOSPC error. + This is useful in memory constrained + environments, where a very large directory can + cause severe performance problems or even + provoke the Out Of Memory killer. (For example, + if there is only 512mb memory available, a 176mb + directory may seriously cramp the system's style.) + i_version Enable 64-bit inode version support. This option is off by default. diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt index 26ebde77e821..f7433355394a 100644 --- a/Documentation/filesystems/jfs.txt +++ b/Documentation/filesystems/jfs.txt @@ -3,6 +3,7 @@ IBM's Journaled File System (JFS) for Linux JFS Homepage: http://jfs.sourceforge.net/ The following mount options are supported: +(*) == default iocharset=name Character set to use for converting from Unicode to ASCII. The default is to do no conversion. Use @@ -21,12 +22,12 @@ nointegrity Do not write to the journal. The primary use of this option from backup media. The integrity of the volume is not guaranteed if the system abnormally abends. -integrity Default. Commit metadata changes to the journal. Use this - option to remount a volume where the nointegrity option was +integrity(*) Commit metadata changes to the journal. Use this option to + remount a volume where the nointegrity option was previously specified in order to restore normal behavior. errors=continue Keep going on a filesystem error. -errors=remount-ro Default. Remount the filesystem read-only on an error. +errors=remount-ro(*) Remount the filesystem read-only on an error. errors=panic Panic and halt the machine if an error occurs. uid=value Override on-disk uid with specified value @@ -35,7 +36,17 @@ umask=value Override on-disk umask with specified octal value. For directories, the execute bit will be set if the corresponding read bit is set. -Please send bugs, comments, cards and letters to shaggy@linux.vnet.ibm.com. +discard=minlen This enables/disables the use of discard/TRIM commands. +discard The discard/TRIM commands are sent to the underlying +nodiscard(*) block device when blocks are freed. This is useful for SSD + devices and sparse/thinly-provisioned LUNs. The FITRIM ioctl + command is also available together with the nodiscard option. + The value of minlen specifies the minimum blockcount, when + a TRIM command to the block device is considered usefull. + When no value is given to the discard option, it defaults to + 64 blocks, which means 256KiB in JFS. + The minlen value of discard overrides the minlen value given + on an FITRIM ioctl(). The JFS mailing list can be subscribed to by using the link labeled "Mail list Subscribe" at our web page http://jfs.sourceforge.net/ diff --git a/Documentation/filesystems/nfs/nfs.txt b/Documentation/filesystems/nfs/nfs.txt index f50f26ce6cd0..f2571c8bef74 100644 --- a/Documentation/filesystems/nfs/nfs.txt +++ b/Documentation/filesystems/nfs/nfs.txt @@ -12,9 +12,47 @@ and work is in progress on adding support for minor version 1 of the NFSv4 protocol. The purpose of this document is to provide information on some of the -upcall interfaces that are used in order to provide the NFS client with -some of the information that it requires in order to fully comply with -the NFS spec. +special features of the NFS client that can be configured by system +administrators. + + +The nfs4_unique_id parameter +============================ + +NFSv4 requires clients to identify themselves to servers with a unique +string. File open and lock state shared between one client and one server +is associated with this identity. To support robust NFSv4 state recovery +and transparent state migration, this identity string must not change +across client reboots. + +Without any other intervention, the Linux client uses a string that contains +the local system's node name. System administrators, however, often do not +take care to ensure that node names are fully qualified and do not change +over the lifetime of a client system. Node names can have other +administrative requirements that require particular behavior that does not +work well as part of an nfs_client_id4 string. + +The nfs.nfs4_unique_id boot parameter specifies a unique string that can be +used instead of a system's node name when an NFS client identifies itself to +a server. Thus, if the system's node name is not unique, or it changes, its +nfs.nfs4_unique_id stays the same, preventing collision with other clients +or loss of state during NFS reboot recovery or transparent state migration. + +The nfs.nfs4_unique_id string is typically a UUID, though it can contain +anything that is believed to be unique across all NFS clients. An +nfs4_unique_id string should be chosen when a client system is installed, +just as a system's root file system gets a fresh UUID in its label at +install time. + +The string should remain fixed for the lifetime of the client. It can be +changed safely if care is taken that the client shuts down cleanly and all +outstanding NFSv4 state has expired, to prevent loss of NFSv4 state. + +This string can be stored in an NFS client's grub.conf, or it can be provided +via a net boot facility such as PXE. It may also be specified as an nfs.ko +module parameter. Specifying a uniquifier string is not support for NFS +clients running in containers. + The DNS resolver ================ diff --git a/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt b/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt new file mode 100644 index 000000000000..56a96fb08a73 --- /dev/null +++ b/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt @@ -0,0 +1,41 @@ +Administrative interfaces for nfsd +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Note that normally these interfaces are used only by the utilities in +nfs-utils. + +nfsd is controlled mainly by pseudofiles under the "nfsd" filesystem, +which is normally mounted at /proc/fs/nfsd/. + +The server is always started by the first write of a nonzero value to +nfsd/threads. + +Before doing that, NFSD can be told which sockets to listen on by +writing to nfsd/portlist; that write may be: + + - an ascii-encoded file descriptor, which should refer to a + bound (and listening, for tcp) socket, or + - "transportname port", where transportname is currently either + "udp", "tcp", or "rdma". + +If nfsd is started without doing any of these, then it will create one +udp and one tcp listener at port 2049 (see nfsd_init_socks). + +On startup, nfsd and lockd grace periods start. + +nfsd is shut down by a write of 0 to nfsd/threads. All locks and state +are thrown away at that point. + +Between startup and shutdown, the number of threads may be adjusted up +or down by additional writes to nfsd/threads or by writes to +nfsd/pool_threads. + +For more detail about files under nfsd/ and what they control, see +fs/nfsd/nfsctl.c; most of them have detailed comments. + +Implementation notes +^^^^^^^^^^^^^^^^^^^^ + +Note that the rpc server requires the caller to serialize addition and +removal of listening sockets, and startup and shutdown of the server. +For nfsd this is done using nfsd_mutex. diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt index ffdd9d866ad7..2d66ed688125 100644 --- a/Documentation/filesystems/nfs/nfsroot.txt +++ b/Documentation/filesystems/nfs/nfsroot.txt @@ -78,7 +78,8 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>] flags = hard, nointr, noposix, cto, ac -ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf> +ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: + <dns0-ip>:<dns1-ip> This parameter tells the kernel how to configure IP addresses of devices and also how to set up the IP routing table. It was originally called @@ -158,6 +159,13 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf> Default: any + <dns0-ip> IP address of first nameserver. + Value gets exported by /proc/net/pnp which is often linked + on embedded systems by /etc/resolv.conf. + + <dns1-ip> IP address of secound nameserver. + Same as above. + nfsrootdebug diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fb0a6aeb936c..a1793d670cd0 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -33,7 +33,7 @@ Table of Contents 2 Modifying System Parameters 3 Per-Process Parameters - 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer + 3.1 /proc/<pid>/oom_score_adj - Adjust the oom-killer score 3.2 /proc/<pid>/oom_score - Display current oom-killer score 3.3 /proc/<pid>/io - Display the IO accounting fields @@ -1320,10 +1320,10 @@ of the kernel. CHAPTER 3: PER-PROCESS PARAMETERS ------------------------------------------------------------------------------ -3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score +3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score -------------------------------------------------------------------------------- -These file can be used to adjust the badness heuristic used to select which +This file can be used to adjust the badness heuristic used to select which process gets killed in out of memory conditions. The badness heuristic assigns a value to each candidate task ranging from 0 @@ -1361,22 +1361,10 @@ same system, cpuset, mempolicy, or memory controller resources to use at least equivalent to discounting 50% of the task's allowed memory from being considered as scoring against the task. -For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also -be used to tune the badness score. Its acceptable values range from -16 -(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17 -(OOM_DISABLE) to disable oom killing entirely for that task. Its value is -scaled linearly with /proc/<pid>/oom_score_adj. - -Writing to /proc/<pid>/oom_score_adj or /proc/<pid>/oom_adj will change the -other with its scaled value. - The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last value set by a CAP_SYS_RESOURCE process. To reduce the value any lower requires CAP_SYS_RESOURCE. -NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see -Documentation/feature-removal-schedule.txt. - Caveat: when a parent task is selected, the oom killer will sacrifice any first generation children with separate address spaces instead, if possible. This avoids servers and important system daemons from being killed and loses the @@ -1387,9 +1375,7 @@ minimal amount of work. ------------------------------------------------------------- This file can be used to check the current score used by the oom-killer is for -any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which -process should be killed in an out-of-memory situation. - +any given <pid>. 3.3 /proc/<pid>/io - Display the IO accounting fields ------------------------------------------------------- |