diff options
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/ata/ahci-platform.txt (renamed from Documentation/devicetree/bindings/ata/calxeda-sata.txt) | 5 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/atmel-nand.txt | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/anatop-regulator.txt | 29 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/sgtl5000.txt | 2 |
4 files changed, 38 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 79caa5651f53..8bb8a76d42e8 100644 --- a/Documentation/devicetree/bindings/ata/calxeda-sata.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -1,10 +1,10 @@ -* Calxeda SATA Controller +* AHCI SATA Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" +- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> @@ -14,4 +14,3 @@ Example: reg = <0xffe08000 0x1000>; interrupts = <115>; }; - diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 5903ecf6e895..a20069502f5a 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -27,13 +27,13 @@ nand0: nand@40000000,0 { reg = <0x40000000 0x10000000 0xffffe800 0x200 >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; + atmel,nand-addr-offset = <21>; /* ale */ + atmel,nand-cmd-offset = <22>; /* cle */ nand-on-flash-bbt; nand-ecc-mode = "soft"; - gpios = <&pioC 13 0 - &pioC 14 0 - 0 + gpios = <&pioC 13 0 /* rdy */ + &pioC 14 0 /* nce */ + 0 /* cd */ >; partition@0 { ... diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt new file mode 100644 index 000000000000..357758cb6e92 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt @@ -0,0 +1,29 @@ +Anatop Voltage regulators + +Required properties: +- compatible: Must be "fsl,anatop-regulator" +- anatop-reg-offset: Anatop MFD register offset +- anatop-vol-bit-shift: Bit shift for the register +- anatop-vol-bit-width: Number of bits used in the register +- anatop-min-bit-val: Minimum value of this register +- anatop-min-voltage: Minimum voltage of this regulator +- anatop-max-voltage: Maximum voltage of this regulator + +Any property defined as part of the core regulator +binding, defined in regulator.txt, can also be used. + +Example: + + regulator-vddpu { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1300000>; + }; diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 2c3cd413f042..9cc44449508d 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -3,6 +3,8 @@ Required properties: - compatible : "fsl,sgtl5000". +- reg : the I2C address of the device + Example: codec: sgtl5000@0a { |