diff options
Diffstat (limited to 'Documentation/devicetree')
191 files changed, 4000 insertions, 1924 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 41c555181b6f..c9953f86b19d 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -3,9 +3,10 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema -DT_SCHEMA_LINT = $(shell which yamllint) +DT_SCHEMA_LINT = $(shell which yamllint || \ + echo "warning: python package 'yamllint' not installed, skipping" >&2) -DT_SCHEMA_MIN_VERSION = 2021.2.1 +DT_SCHEMA_MIN_VERSION = 2022.3 PHONY += check_dtschema_version check_dtschema_version: @@ -24,18 +25,11 @@ quiet_cmd_extract_ex = DTEX $@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE $(call if_changed,extract_ex) -# Use full schemas when checking %.example.dts -DT_TMP_SCHEMA := $(obj)/processed-schema-examples.json - find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ - -name 'processed-schema*' ! \ - -name '*.example.dt.yaml' \) + -name 'processed-schema*' \) -ifeq ($(DT_SCHEMA_FILES),) -find_cmd = $(find_all_cmd) -else -find_cmd = echo $(addprefix $(srctree)/, $(DT_SCHEMA_FILES)) -endif +find_cmd = $(find_all_cmd) | grep -F "$(DT_SCHEMA_FILES)" +CHK_DT_DOCS := $(shell $(find_cmd)) quiet_cmd_yamllint = LINT $(src) cmd_yamllint = ($(find_cmd) | \ @@ -72,35 +66,14 @@ override DTC_FLAGS := \ # Disable undocumented compatible checks until warning free override DT_CHECKER_FLAGS ?= -$(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE +$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE $(call if_changed_rule,chkdt) -ifeq ($(DT_SCHEMA_FILES),) - -# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too. -# Just copy processed-schema-examples.json - -$(obj)/processed-schema.json: $(obj)/processed-schema-examples.json FORCE - $(call if_changed,copy) - -DT_SCHEMA_FILES = $(DT_DOCS) - -else - -# If DT_SCHEMA_FILES is specified, use it for processed-schema.json - -$(obj)/processed-schema.json: DT_MK_SCHEMA_FLAGS := -u -$(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE - $(call if_changed,mk_schema) - -endif - -always-$(CHECK_DT_BINDING) += processed-schema-examples.json -always-$(CHECK_DTBS) += processed-schema.json -always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) +always-y += processed-schema.json +always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS)) +always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS)) # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of # build artifacts here before they are processed by scripts/Makefile.clean clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \ - -name '*.example.dt.yaml' \) -delete 2>/dev/null) + -name '*.example.dtb' \) -delete 2>/dev/null) diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml index f8530a50863a..1706134b75a3 100644 --- a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml +++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml @@ -119,6 +119,11 @@ examples: arm,hbi = <0x249>; interrupt-parent = <&gic>; + gic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <3>; + }; + /* * This CCI node corresponds to a CCI component whose control * registers sits at address 0x000000002c090000. diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt index 380e21c5fc7e..cc5e190390b7 100644 --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt @@ -62,8 +62,8 @@ Example 1 (ARM 64-bit, 6-cpu system, two clusters): The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024) are 1024 and 578 for cluster0 and cluster1. Further normalization is done by the operating system based on cluster0@max-freq=1100 and -custer1@max-freq=850, final capacities are 1024 for cluster0 and -446 for cluster1 (576*850/1100). +cluster1@max-freq=850, final capacities are 1024 for cluster0 and +446 for cluster1 (578*850/1100). cpus { #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 3aad1b93742c..ed04650291a8 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -233,17 +233,19 @@ properties: - ti,am4372 cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - + oneOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - $ref: '/schemas/types.yaml#/definitions/uint64' description: + The DT specification defines this as 64-bit always, but some 32-bit Arm + systems have used a 32-bit value which must be supported. Required for systems that have an "enable-method" property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. cpu-idle-states: $ref: '/schemas/types.yaml#/definitions/phandle-array' + items: + maxItems: 1 description: | List of phandles to idle state nodes supported by this cpu (see ./idle-states.yaml). diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt deleted file mode 100644 index fd54e1db2156..000000000000 --- a/Documentation/devicetree/bindings/arm/fw-cfg.txt +++ /dev/null @@ -1,38 +0,0 @@ -* QEMU Firmware Configuration bindings for ARM - -QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets -provide the following Firmware Configuration interface on the "virt" machine -type: - -- A write-only, 16-bit wide selector (or control) register, -- a read-write, 64-bit wide data register. - -QEMU exposes the control and data register to ARM guests as memory mapped -registers; their location is communicated to the guest's UEFI firmware in the -DTB that QEMU places at the bottom of the guest's DRAM. - -The authoritative guest-side hardware interface documentation to the fw_cfg -device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. - - -Required properties: - -- compatible: "qemu,fw-cfg-mmio". - -- reg: the MMIO region used by the device. - * Bytes 0x0 to 0x7 cover the data register. - * Bytes 0x8 to 0x9 cover the selector register. - * Further registers may be appended to the region in case of future interface - revisions / feature bits. - -Example: - -/ { - #size-cells = <0x2>; - #address-cells = <0x2>; - - fw-cfg@9020000 { - compatible = "qemu,fw-cfg-mmio"; - reg = <0x0 0x9020000 0x0 0xa>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml index 52bce5dbb11f..4d381fa1ee57 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.yaml +++ b/Documentation/devicetree/bindings/arm/idle-states.yaml @@ -337,8 +337,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x0>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@1 { @@ -346,8 +346,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x1>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@100 { @@ -355,8 +355,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@101 { @@ -364,8 +364,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@10000 { @@ -373,8 +373,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10000>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@10001 { @@ -382,8 +382,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10001>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@10100 { @@ -391,8 +391,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@10101 { @@ -400,8 +400,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; }; cpu@100000000 { @@ -409,8 +409,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x0>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100000001 { @@ -418,8 +418,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x1>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100000100 { @@ -427,8 +427,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100000101 { @@ -436,8 +436,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100010000 { @@ -445,8 +445,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10000>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100010001 { @@ -454,8 +454,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10001>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100010100 { @@ -463,8 +463,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; cpu@100010101 { @@ -472,8 +472,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; }; idle-states { @@ -567,56 +567,56 @@ examples: device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; }; cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; }; cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; }; cpu@102 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; }; cpu@103 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; }; idle-states { diff --git a/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml new file mode 100644 index 000000000000..c7c5eb48fc7e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/linux,dummy-virt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QEMU virt machine + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + $nodename: + const: "/" + compatible: + const: linux,dummy-virt + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 7a04b8aaaec3..dbb6f3dc5ae5 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -68,6 +68,8 @@ properties: interrupt-affinity: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: When using SPIs, specifies a list of phandles to CPU nodes corresponding directly to the affinity of diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt deleted file mode 100644 index 77091a277642..000000000000 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ /dev/null @@ -1,79 +0,0 @@ -* AHCI SATA Controller - -SATA nodes are defined to describe on-chip Serial ATA controllers. -Each SATA controller should have its own node. - -It is possible, but not required, to represent each port as a sub-node. -It allows to enable each port independently when dealing with multiple -PHYs. - -Required properties: -- compatible : compatible string, one of: - - "brcm,iproc-ahci" - - "hisilicon,hisi-ahci" - - "cavium,octeon-7130-ahci" - - "ibm,476gtr-ahci" - - "marvell,armada-380-ahci" - - "marvell,armada-3700-ahci" - - "snps,dwc-ahci" - - "snps,spear-ahci" - - "generic-ahci" -- interrupts : <interrupt mapping for SATA IRQ> -- reg : <registers mapping> - -Please note that when using "generic-ahci" you must also specify a SoC specific -compatible: - compatible = "manufacturer,soc-model-ahci", "generic-ahci"; - -Optional properties: -- dma-coherent : Present if dma operations are coherent -- clocks : a list of phandle + clock specifier pairs -- resets : a list of phandle + reset specifier pairs -- target-supply : regulator for SATA target power -- phy-supply : regulator for PHY power -- phys : reference to the SATA PHY node -- phy-names : must be "sata-phy" -- ahci-supply : regulator for AHCI controller -- ports-implemented : Mask that indicates which ports that the HBA supports - are available for software to use. Useful if PORTS_IMPL - is not programmed by the BIOS, which is true with - some embedded SOC's. - -Required properties when using sub-nodes: -- #address-cells : number of cells to encode an address -- #size-cells : number of cells representing the size of an address - -Sub-nodes required properties: -- reg : the port number -And at least one of the following properties: -- phys : reference to the SATA PHY node -- target-supply : regulator for SATA target power - -Examples: - sata@ffe08000 { - compatible = "snps,spear-ahci"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; - }; - -With sub-nodes: - sata@f7e90000 { - compatible = "marvell,berlin2q-achi", "generic-ahci"; - reg = <0xe90000 0x1000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SATA>; - #address-cells = <1>; - #size-cells = <0>; - - sata0: sata-port@0 { - reg = <0>; - phys = <&sata_phy 0>; - target-supply = <®_sata0>; - }; - - sata1: sata-port@1 { - reg = <1>; - phys = <&sata_phy 1>; - target-supply = <®_sata1>;; - }; - }; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml new file mode 100644 index 000000000000..c146ab8e14e5 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -0,0 +1,189 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/ahci-platform.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AHCI SATA Controller + +description: | + SATA nodes are defined to describe on-chip Serial ATA controllers. + Each SATA controller should have its own node. + + It is possible, but not required, to represent each port as a sub-node. + It allows to enable each port independently when dealing with multiple + PHYs. + +maintainers: + - Hans de Goede <hdegoede@redhat.com> + - Jens Axboe <axboe@kernel.dk> + +select: + properties: + compatible: + contains: + enum: + - brcm,iproc-ahci + - cavium,octeon-7130-ahci + - hisilicon,hisi-ahci + - ibm,476gtr-ahci + - marvell,armada-3700-ahci + - marvell,armada-8k-ahci + - marvell,berlin2q-ahci + - snps,dwc-ahci + - snps,spear-ahci + required: + - compatible + +allOf: + - $ref: "sata-common.yaml#" + + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,iproc-ahci + - marvell,armada-8k-ahci + - marvell,berlin2-ahci + - marvell,berlin2q-ahci + - const: generic-ahci + - items: + - enum: + - rockchip,rk3568-dwc-ahci + - const: snps,dwc-ahci + - enum: + - cavium,octeon-7130-ahci + - hisilicon,hisi-ahci + - ibm,476gtr-ahci + - marvell,armada-3700-ahci + - snps,dwc-ahci + - snps,spear-ahci + + reg: + minItems: 1 + maxItems: 2 + + reg-names: + maxItems: 1 + + clocks: + description: + Clock IDs array as required by the controller. + minItems: 1 + maxItems: 3 + + clock-names: + description: + Names of clocks corresponding to IDs in the clock property. + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + ahci-supply: + description: + regulator for AHCI controller + + dma-coherent: true + + phy-supply: + description: + regulator for PHY power + + phys: + description: + List of all PHYs on this controller + maxItems: 1 + + phy-names: + description: + Name specifier for the PHYs + maxItems: 1 + + ports-implemented: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + Mask that indicates which ports that the HBA supports + are available for software to use. Useful if PORTS_IMPL + is not programmed by the BIOS, which is true with + some embedded SoCs. + maximum: 0x1f + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + target-supply: + description: + regulator for SATA target power + +required: + - compatible + - reg + - interrupts + +patternProperties: + "^sata-port@[0-9a-f]+$": + type: object + additionalProperties: false + description: + Subnode with configuration of the Ports. + + properties: + reg: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + maxItems: 1 + + target-supply: + description: + regulator for SATA target power + + required: + - reg + + anyOf: + - required: [ phys ] + - required: [ target-supply ] + +unevaluatedProperties: false + +examples: + - | + sata@ffe08000 { + compatible = "snps,spear-ahci"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/berlin2q.h> + sata@f7e90000 { + compatible = "marvell,berlin2q-ahci", "generic-ahci"; + reg = <0xf7e90000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + target-supply = <®_sata0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + target-supply = <®_sata1>; + }; + }; diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt deleted file mode 100644 index 1c3d3cc70051..000000000000 --- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Cortina Systems Gemini SATA Bridge - -The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that -takes two Faraday Technology FTIDE010 PATA controllers and bridges -them in different configurations to two SATA ports. - -Required properties: -- compatible: should be - "cortina,gemini-sata-bridge" -- reg: registers and size for the block -- resets: phandles to the reset lines for both SATA bridges -- reset-names: must be "sata0", "sata1" -- clocks: phandles to the compulsory peripheral clocks -- clock-names: must be "SATA0_PCLK", "SATA1_PCLK" -- syscon: a phandle to the global Gemini system controller -- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for - the ATA controller and SATA bridges. Values 0..3: - Mode 0: ata0 master <-> sata0 - ata1 master <-> sata1 - ata0 slave interface brought out on IDE pads - Mode 1: ata0 master <-> sata0 - ata1 master <-> sata1 - ata1 slave interface brought out on IDE pads - Mode 2: ata1 master <-> sata1 - ata1 slave <-> sata0 - ata0 master and slave interfaces brought out - on IDE pads - Mode 3: ata0 master <-> sata0 - ata0 slave <-> sata1 - ata1 master and slave interfaces brought out - on IDE pads - -Optional boolean properties: -- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection. - The muxmode setting decides whether ATA0 or ATA1 is brought out, - and whether master, slave or both interfaces get brought out. -- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge - inside the Gemnini SoC. The Muxmode decides what PATA blocks will - be muxed out and how. - -Example: - -sata: sata@46000000 { - compatible = "cortina,gemini-sata-bridge"; - reg = <0x46000000 0x100>; - resets = <&rcon 26>, <&rcon 27>; - reset-names = "sata0", "sata1"; - clocks = <&gcc GEMINI_CLK_GATE_SATA0>, - <&gcc GEMINI_CLK_GATE_SATA1>; - clock-names = "SATA0_PCLK", "SATA1_PCLK"; - syscon = <&syscon>; - cortina,gemini-ata-muxmode = <3>; - cortina,gemini-enable-ide-pins; - cortina,gemini-enable-sata-bridge; -}; diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file mode 100644 index 000000000000..21a90975593b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cortina Systems Gemini SATA Bridge + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that + takes two Faraday Technology FTIDE010 PATA controllers and bridges + them in different configurations to two SATA ports. + +properties: + compatible: + const: cortina,gemini-sata-bridge + + reg: + maxItems: 1 + + resets: + minItems: 2 + maxItems: 2 + description: phandles to the reset lines for both SATA bridges + + reset-names: + items: + - const: sata0 + - const: sata1 + + clocks: + minItems: 2 + maxItems: 2 + description: phandles to the compulsory peripheral clocks + + clock-names: + items: + - const: SATA0_PCLK + - const: SATA1_PCLK + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the global Gemini system controller + + cortina,gemini-ata-muxmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + - 2 + - 3 + description: | + Tell the desired multiplexing mode for the ATA controller and SATA + bridges. + Mode 0: ata0 master <-> sata0 + ata1 master <-> sata1 + ata0 slave interface brought out on IDE pads + Mode 1: ata0 master <-> sata0 + ata1 master <-> sata1 + ata1 slave interface brought out on IDE pads + Mode 2: ata1 master <-> sata1 + ata1 slave <-> sata0 + ata0 master and slave interfaces brought out on IDE pads + Mode 3: ata0 master <-> sata0 + ata0 slave <-> sata1 + ata1 master and slave interfaces brought out on IDE pads + + cortina,gemini-enable-ide-pins: + type: boolean + description: Enables the PATA to IDE connection. + The muxmode setting decides whether ATA0 or ATA1 is brought out, + and whether master, slave or both interfaces get brought out. + + cortina,gemini-enable-sata-bridge: + type: boolean + description: Enables the PATA to SATA bridge inside the Gemnini SoC. + The Muxmode decides what PATA blocks will be muxed out and how. + +required: + - clocks + - clock-names + - cortina,gemini-ata-muxmode + - resets + - reset-names + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cortina,gemini-clock.h> + sata@46000000 { + compatible = "cortina,gemini-sata-bridge"; + reg = <0x46000000 0x100>; + resets = <&rcon 26>, <&rcon 27>; + reset-names = "sata0", "sata1"; + clocks = <&gcc GEMINI_CLK_GATE_SATA0>, + <&gcc GEMINI_CLK_GATE_SATA1>; + clock-names = "SATA0_PCLK", "SATA1_PCLK"; + syscon = <&syscon>; + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-ide-pins; + cortina,gemini-enable-sata-bridge; + }; diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml index ce75d77e9289..49679b58041c 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -51,6 +51,9 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 8 + items: + minItems: 2 + maxItems: 2 calxeda,tx-atten: description: | diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index 863a287ebc7e..ad313ccaaaef 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -35,7 +35,10 @@ properties: The SRAM that needs to be claimed to access the display engine bus. $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + items: + - items: + - description: phandle to SRAM + - description: register value for device ranges: true diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml new file mode 100644 index 000000000000..c56f911fff47 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI clksel clock + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: | + The TI CLKSEL clocks consist of consist of input clock mux bits, and in some + cases also has divider, multiplier and gate bits. + +properties: + compatible: + const: ti,clksel + + reg: + maxItems: 1 + description: The CLKSEL register range + + '#address-cells': + enum: [ 0, 1, 2 ] + + '#size-cells': + enum: [ 0, 1, 2 ] + + ranges: true + + "#clock-cells": + const: 2 + description: The CLKSEL register and bit offset + +required: + - compatible + - reg + - "#clock-cells" + +additionalProperties: + type: object + +examples: + - | + clksel_gfx_fclk: clock@52c { + compatible = "ti,clksel"; + reg = <0x25c 0x4>; + #clock-cells = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 7eb8659fa610..0420fa563532 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -104,8 +104,7 @@ properties: - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB Type-C Cable and Connector specification, when Power Delivery is not supported. - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - default - 1.5A diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml new file mode 100644 index 000000000000..0ccaab16dc61 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@microchip.com> + +properties: + compatible: + const: atmel,at91sam9g46-aes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: aes_clk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + aes: crypto@e1810000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xe1810000 0x100>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml new file mode 100644 index 000000000000..5163c51b4547 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@microchip.com> + +properties: + compatible: + const: atmel,at91sam9g46-sha + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: sha_clk + + dmas: + maxItems: 1 + description: TX DMA Channel + + dma-names: + const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + sha: crypto@e1814000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xe1814000 0x100>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml new file mode 100644 index 000000000000..fcc5adf03cad --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@microchip.com> + +properties: + compatible: + const: atmel,at91sam9g46-tdes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: tdes_clk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + tdes: crypto@e2014000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xe2014000 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt deleted file mode 100644 index f2aab3dc2b52..000000000000 --- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Atmel HW cryptographic accelerators - -These are the HW cryptographic accelerators found on some Atmel products. - -* Advanced Encryption Standard (AES) - -Required properties: -- compatible : Should be "atmel,at91sam9g46-aes". -- reg: Should contain AES registers location and length. -- interrupts: Should contain the IRQ line for the AES. -- dmas: List of two DMA specifiers as described in - atmel-dma.txt and dma.txt files. -- dma-names: Contains one identifier string for each DMA specifier - in the dmas property. - -Example: -aes@f8038000 { - compatible = "atmel,at91sam9g46-aes"; - reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; - dmas = <&dma1 2 18>, - <&dma1 2 19>; - dma-names = "tx", "rx"; - -* Triple Data Encryption Standard (Triple DES) - -Required properties: -- compatible : Should be "atmel,at91sam9g46-tdes". -- reg: Should contain TDES registers location and length. -- interrupts: Should contain the IRQ line for the TDES. - -Optional properties: -- dmas: List of two DMA specifiers as described in - atmel-dma.txt and dma.txt files. -- dma-names: Contains one identifier string for each DMA specifier - in the dmas property. - -Example: -tdes@f803c000 { - compatible = "atmel,at91sam9g46-tdes"; - reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; - dmas = <&dma1 2 20>, - <&dma1 2 21>; - dma-names = "tx", "rx"; -}; - -* Secure Hash Algorithm (SHA) - -Required properties: -- compatible : Should be "atmel,at91sam9g46-sha". -- reg: Should contain SHA registers location and length. -- interrupts: Should contain the IRQ line for the SHA. - -Optional properties: -- dmas: One DMA specifiers as described in - atmel-dma.txt and dma.txt files. -- dma-names: Contains one identifier string for each DMA specifier - in the dmas property. Only one "tx" string needed. - -Example: -sha@f8034000 { - compatible = "atmel,at91sam9g46-sha"; - reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; - dmas = <&dma1 2 17>; - dma-names = "tx"; -}; diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml index 9c53c27bd20a..e0fe63957888 100644 --- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -22,19 +22,28 @@ properties: intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the NPE this crypto engine + - description: the NPE instance number description: phandle to the NPE this crypto engine is using, the cell describing the NPE instance to be used. queue-rx: $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number description: phandle to the RX queue on the NPE, the cell describing the queue instance to be used. queue-txready: $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + items: + - items: + - description: phandle to the TX READY queue on the NPE + - description: the queue instance number description: phandle to the TX READY queue on the NPE, the cell describing the queue instance to be used. diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index e77523b02fad..d4412aea7b73 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -69,6 +69,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 2 + items: + maxItems: 1 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available. diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index a1d5a32660e0..a9d34dd7bbc5 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -72,8 +72,7 @@ properties: - const: hpd-removed ddc: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: > Phandle of the I2C controller used for DDC EDID probing diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml index d3dd7a79b909..f08a01dfedf3 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -76,9 +76,8 @@ properties: adi,input-depth: description: Number of bits per color component at the input. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 10, 12 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 10, 12 ] adi,input-colorspace: description: Input color space. diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml index 9be44a682e67..b00246faea57 100644 --- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -26,9 +26,8 @@ properties: reg-io-width: description: Width (in bytes) of the registers specified by the reg property. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] default: 1 clocks: diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index eacfe7165083..3bd670b8e5cd 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -77,7 +77,10 @@ required: - vddio-supply - ports -additionalProperties: false +allOf: + - $ref: ../dsi-controller.yaml# + +unevaluatedProperties: false examples: - | @@ -87,7 +90,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - dsi_bridge: dsi-bridge@e { + dsi_bridge: dsi@e { compatible = "toshiba,tc358768"; reg = <0xe>; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt deleted file mode 100644 index 0fba2ee6440a..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt +++ /dev/null @@ -1,51 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC) - -MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is -not capable to transfer high resoltuion frame data as decon can send. MIC -solves this problem by compressing the frame data by 1/2 before it is -transferred through mipi dsi. The compressed frame data must be uncompressed in -the panel PCB. - -Required properties: -- compatible: value should be "samsung,exynos5433-mic". -- reg: physical base address and length of the MIC registers set and system - register of mic. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0". -- samsung,disp-syscon: the reference node for syscon for DISP block. -- ports: contains a port which is connected to decon node and dsi node. - address-cells and size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the - decon node or dsi node. The reg value must be 0 and 1 respectively. - -Example: -SoC specific DT entry: -mic: mic@13930000 { - compatible = "samsung,exynos5433-mic"; - reg = <0x13930000 0x48>; - clocks = <&cmu_disp CLK_PCLK_MIC0>, - <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; - clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; - samsung,disp-syscon = <&syscon_disp>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mic_to_decon: endpoint { - remote-endpoint = <&decon_to_mic>; - }; - }; - - port@1 { - reg = <1>; - mic_to_dsi: endpoint { - remote-endpoint = <&dsi_to_mic>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt deleted file mode 100644 index 775193e1c641..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt +++ /dev/null @@ -1,60 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of: - "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv"; -- reg: physical base address and length of the DECON registers set. -- interrupt-names: should contain the interrupt names depending on mode of work: - video mode: "vsync", - command mode: "lcd_sys", - command mode with software trigger: "lcd_sys", "te". -- interrupts or interrupts-extended: list of interrupt specifiers corresponding - to names privided in interrupt-names, as described in - interrupt-controller/interrupts.txt -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x", - "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", - "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk", - "sclk_decon_eclk" -- ports: contains a port which is connected to mic node. address-cells and - size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the mic - node. The reg value muset be 0. - -Example: -SoC specific DT entry: -decon: decon@13800000 { - compatible = "samsung,exynos5433-decon"; - reg = <0x13800000 0x2104>; - clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_XIU_DECON0X>, - <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_SMMU_DECON1X>, - <&cmu_disp CLK_ACLK_XIU_DECON1X>, - <&cmu_disp CLK_PCLK_SMMU_DECON1X>, - <&cmu_disp CLK_SCLK_DECON_VCLK>, - <&cmu_disp CLK_SCLK_DECON_ECLK>; - clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", - "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", - "pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk"; - interrupt-names = "vsync", "lcd_sys"; - interrupts = <0 202 0>, <0 203 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt deleted file mode 100644 index 53912c99ec38..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt +++ /dev/null @@ -1,65 +0,0 @@ -Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos7 series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be "samsung,exynos7-decon"; - -- reg: physical base address and length of the DECON registers set. - -- interrupts: should contain a list of all DECON IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_decon0", "aclk_decon0", - "decon0_eclk", "decon0_vclk". -- i80-if-timings: timing configuration for lcd i80 interface support. - -Optional Properties: -- power-domains: a phandle to DECON power domain node. -- display-timings: timing settings for DECON, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt - -Example: - -SoC specific DT entry: - - decon@13930000 { - compatible = "samsung,exynos7-decon"; - interrupt-parent = <&combiner>; - reg = <0x13930000 0x1000>; - interrupt-names = "lcd_sys", "vsync", "fifo"; - interrupts = <0 188 0>, <0 189 0>, <0 190 0>; - clocks = <&clock_disp PCLK_DECON_INT>, - <&clock_disp ACLK_DECON_INT>, - <&clock_disp SCLK_DECON_INT_ECLK>, - <&clock_disp SCLK_DECON_INT_EXTCLKPLL>; - clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk", - "decon0_vclk"; - status = "disabled"; - }; - -Board specific DT entry: - - decon@13930000 { - pinctrl-0 = <&lcd_clk &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt deleted file mode 100644 index 58b12e25bbb1..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ /dev/null @@ -1,64 +0,0 @@ -Device-Tree bindings for drm hdmi driver - -Required properties: -- compatible: value should be one among the following: - 1) "samsung,exynos4210-hdmi" - 2) "samsung,exynos4212-hdmi" - 3) "samsung,exynos5420-hdmi" - 4) "samsung,exynos5433-hdmi" -- reg: physical base address of the hdmi and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- hpd-gpios: following information about the hotplug gpio pin. - a) phandle of the gpio controller node. - b) pin number within the gpio controller. - c) optional flags and pull up/down. -- ddc: phandle to the hdmi ddc node -- phy: phandle to the hdmi phy node -- samsung,syscon-phandle: phandle for system controller node for PMU. -- #sound-dai-cells: should be 0. - -Required properties for Exynos 4210, 4212, 5420 and 5433: -- clocks: list of clock IDs from SoC clock driver. - a) hdmi: Gate of HDMI IP bus clock. - b) sclk_hdmi: Gate of HDMI special clock. - c) sclk_pixel: Pixel special clock, one of the two possible inputs of - HDMI clock mux. - d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of - HDMI clock mux. - e) mout_hdmi: It is required by the driver to switch between the 2 - parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable - after configuration, parent is set to sclk_hdmiphy else - sclk_pixel. -- clock-names: aliases as per driver requirements for above clock IDs: - "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". - -Required properties for Exynos 5433: -- clocks: list of clock specifiers according to common clock bindings. - a) hdmi_pclk: Gate of HDMI IP APB bus. - b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus. - d) i_tmds_clk: Gate of HDMI TMDS clock. - e) i_pixel_clk: Gate of HDMI pixel clock. - f) i_spdif_clk: Gate of HDMI SPDIF clock. - g) oscclk: Oscillator clock, used as parent of following *_user clocks - in case HDMI-PHY is not operational. - h) tmds_clko: TMDS clock generated by HDMI-PHY. - i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko, - respectively if HDMI-PHY is off and operational. - j) pixel_clko: Pixel clock generated by HDMI-PHY. - k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko, - respectively if HDMI-PHY is off and operational. -- clock-names: aliases for above clock specfiers. -- samsung,sysreg: handle to syscon used to control the system registers. - -Example: - - hdmi { - compatible = "samsung,exynos4212-hdmi"; - reg = <0x14530000 0x100000>; - interrupts = <0 95 0>; - hpd-gpios = <&gpx3 7 1>; - ddc = <&hdmi_ddc_node>; - phy = <&hdmi_phy_node>; - samsung,syscon-phandle = <&pmu_system_controller>; - }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt deleted file mode 100644 index 41eee971562b..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiddc driver - -Required properties: -- compatible: value should be one of the following - 1) "samsung,exynos5-hdmiddc" <DEPRECATED> - 2) "samsung,exynos4210-hdmiddc" - -- reg: I2C address of the hdmiddc device. - -Example: - - hdmiddc { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt deleted file mode 100644 index 162f641f7639..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiphy driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-hdmiphy" <DEPRECATED> - 2) "samsung,exynos4210-hdmiphy". - 3) "samsung,exynos4212-hdmiphy". -- reg: I2C address of the hdmiphy device. - -Example: - - hdmiphy { - compatible = "samsung,exynos4210-hdmiphy"; - reg = <0x38>; - }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt deleted file mode 100644 index 3e38128f866b..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt +++ /dev/null @@ -1,26 +0,0 @@ -Device-Tree bindings for mixer driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-mixer" <DEPRECATED> - 2) "samsung,exynos4210-mixer" - 3) "samsung,exynos4212-mixer" - 4) "samsung,exynos5250-mixer" - 5) "samsung,exynos5420-mixer" - -- reg: physical base address of the mixer and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- clocks: list of clock IDs from SoC clock driver. - a) mixer: Gate of Mixer IP bus clock. - b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of - mixer mux. - c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi. - -Example: - - mixer { - compatible = "samsung,exynos5250-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - }; diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt deleted file mode 100644 index b3096421d42b..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt +++ /dev/null @@ -1,107 +0,0 @@ -Device-Tree bindings for Samsung SoC display controller (FIMD) - -FIMD (Fully Interactive Mobile Display) is the Display Controller for the -Samsung series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ - "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ - "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ - "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ - "samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */ - "samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */ - -- reg: physical base address and length of the FIMD registers set. - -- interrupts: should contain a list of all FIMD IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "sclk_fimd" and "fimd". - -Optional Properties: -- power-domains: a phandle to FIMD power domain node. -- samsung,invert-vden: video enable signal is inverted -- samsung,invert-vclk: video clock signal is inverted -- display-timings: timing settings for FIMD, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. -- samsung,sysreg: handle to syscon used to control the system registers -- i80-if-timings: timing configuration for lcd i80 interface support. - - cs-setup: clock cycles for the active period of address signal is enabled - until chip select is enabled. - If not specified, the default value(0) will be used. - - wr-setup: clock cycles for the active period of CS signal is enabled until - write signal is enabled. - If not specified, the default value(0) will be used. - - wr-active: clock cycles for the active period of CS is enabled. - If not specified, the default value(1) will be used. - - wr-hold: clock cycles for the active period of CS is disabled until write - signal is disabled. - If not specified, the default value(0) will be used. - - The parameters are defined as: - - VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? - : : : : : - Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX - | cs-setup+1 | : : : - |<---------->| : : : - Chip Select ???????????????|____________:____________:____________|?? - | wr-setup+1 | | wr-hold+1 | - |<---------->| |<---------->| - Write Enable ????????????????????????????|____________|??????????????? - | wr-active+1| - |<---------->| - Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- - -The device node can contain 'port' child nodes according to the bindings defined -in [2]. The following are properties specific to those nodes: -- reg: (required) port index, can be: - 0 - for CAMIF0 input, - 1 - for CAMIF1 input, - 2 - for CAMIF2 input, - 3 - for parallel output, - 4 - for write-back interface - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - -SoC specific DT entry: - - fimd@11c00000 { - compatible = "samsung,exynos4210-fimd"; - interrupt-parent = <&combiner>; - reg = <0x11c00000 0x20000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <11 0>, <11 1>, <11 2>; - clocks = <&clock 140>, <&clock 283>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&pd_lcd0>; - status = "disabled"; - }; - -Board specific DT entry: - - fimd@11c00000 { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml index 111967efa999..bdaf0b51e68c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -51,7 +51,10 @@ properties: mediatek,syscon-hdmi: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to system configuration registers + - description: register offset in the system configuration registers description: | phandle link and register offset to the system configuration registers. diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 99a1ba3ada56..3397bc31d087 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -64,6 +64,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. phandle to the On Chip Memory (OCMEM) that's present on some a3xx and diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt deleted file mode 100644 index b07eeb38f709..000000000000 --- a/Documentation/devicetree/bindings/display/msm/mdp4.txt +++ /dev/null @@ -1,114 +0,0 @@ -Qualcomm adreno/snapdragon MDP4 display controller - -Description: - -This is the bindings documentation for the MDP4 display controller found in -SoCs like MSM8960, APQ8064 and MSM8660. - -Required properties: -- compatible: - * "qcom,mdp4" - mdp4 -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the display controller. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "core_clk" - * "iface_clk" - * "bus_clk" - * "lut_clk" - * "hdmi_clk" - * "tv_clk" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The output port mappings are: - Port 0 -> LCDC/LVDS - Port 1 -> DSI1 Cmd/Video - Port 2 -> DSI2 Cmd/Video - Port 3 -> DTV - -Optional properties: -- clock-names: the following clocks are optional: - * "lut_clk" -- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be - used for LCDC. This is only valid for 18bpp panels. - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - ... - ports { - ... - port@0 { - reg = <0>; - hdmi_in: endpoint { - remote-endpoint = <&mdp_dtv_out>; - }; - }; - ... - }; - ... - }; - - ... - - mdp: mdp@5100000 { - compatible = "qcom,mdp4"; - reg = <0x05100000 0xf0000>; - interrupts = <GIC_SPI 75 0>; - clock-names = - "core_clk", - "iface_clk", - "lut_clk", - "hdmi_clk", - "tv_clk"; - clocks = - <&mmcc MDP_CLK>, - <&mmcc MDP_AHB_CLK>, - <&mmcc MDP_AXI_CLK>, - <&mmcc MDP_LUT_CLK>, - <&mmcc HDMI_TV_CLK>, - <&mmcc MDP_TV_CLK>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp_lvds_out: endpoint { - }; - }; - - port@1 { - reg = <1>; - mdp_dsi1_out: endpoint { - }; - }; - - port@2 { - reg = <2>; - mdp_dsi2_out: endpoint { - }; - }; - - port@3 { - reg = <3>; - mdp_dtv_out: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml new file mode 100644 index 000000000000..f63f60fea27c --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon MDP4 display controller + +description: > + MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660. + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + const: qcom,mdp4 + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core_clk + - const: iface_clk + - const: bus_clk + - const: lut_clk + - const: hdmi_clk + - const: tv_clk + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: LCDC/LVDS + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI1 Cmd / Video + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DSI2 Cmd / Video + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Digital TV + + qcom,lcdc-align-lsb: + type: boolean + description: > + Indication that LSB alignment should be used for LCDC. + This is only valid for 18bpp panels. + +required: + - compatible + - reg + - clocks + - ports + +additionalProperties: false + +examples: + - | + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <0 75 0>; + clock-names = + "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + clocks = + <&mmcc 77>, + <&mmcc 86>, + <&mmcc 102>, + <&mmcc 75>, + <&mmcc 97>, + <&mmcc 12>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml index 56903ded005e..6d30575819d3 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml @@ -31,8 +31,7 @@ properties: patternProperties: "^timing": type: object - allOf: - - $ref: panel-timing.yaml# + $ref: panel-timing.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index 3715882b63b6..3f6efbb942da 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel maintainers: - - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + - Quentin Schulz <quentin.schulz@theobroma-systems.com> allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index 13efea574584..56cedcd6d576 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -76,17 +76,21 @@ properties: renesas,cmms: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + maxItems: 1 description: A list of phandles to the CMM instances present in the SoC, one for each available DU channel. renesas,vsps: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + items: + - description: phandle to VSP instance that serves the DU channel + - description: Channel index identifying the LIF instance in that VSP description: A list of phandle and channel index tuples to the VSPs that handle the - memory interfaces for the DU channels. The phandle identifies the VSP - instance that serves the DU channel, and the channel index identifies - the LIF instance in that VSP. + memory interfaces for the DU channels. required: - compatible diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml index 7204da5eb4c5..a8d18a37cb23 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -21,6 +21,8 @@ properties: ports: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml new file mode 100644 index 000000000000..f998a3a5b71f --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC HDMI DDC + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + oneOf: + - const: samsung,exynos4210-hdmiddc + - const: samsung,exynos5-hdmiddc + deprecated: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml new file mode 100644 index 000000000000..cb8e735ce3bd --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml @@ -0,0 +1,227 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC HDMI + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + enum: + - samsung,exynos4210-hdmi + - samsung,exynos4212-hdmi + - samsung,exynos5420-hdmi + - samsung,exynos5433-hdmi + + clocks: + minItems: 5 + maxItems: 10 + + clock-names: + minItems: 5 + maxItems: 10 + + ddc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the HDMI DDC node. + + hdmi-en-supply: + description: + Provides voltage source for DCC lines available on HDMI connector. When + there is no power provided for DDC epprom, some TV-sets do not pulls up + HPD (hot plug detect) line, what causes HDMI block to stay turned off. + When provided, the regulator allows TV-set correctly signal HPD event. + + hpd-gpios: + maxItems: 1 + description: + A GPIO line connected to HPD + + interrupts: + maxItems: 1 + + phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the HDMI PHY node. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Contains a port which is connected to mic node. + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,syscon-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the PMU system controller node. + + samsung,sysreg-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface. + + '#sound-dai-cells': + const: 0 + + vdd-supply: + description: + VDD 1.0V HDMI TX. + + vdd_osc-supply: + description: + VDD 1.8V HDMI OSC. + + vdd_pll-supply: + description: + VDD 1.0V HDMI PLL. + +required: + - compatible + - clocks + - clock-names + - ddc + - hpd-gpios + - interrupts + - phy + - reg + - samsung,syscon-phandle + - '#sound-dai-cells' + - vdd-supply + - vdd_osc-supply + - vdd_pll-supply + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-hdmi + then: + properties: + clocks: + items: + - description: Gate of HDMI IP APB bus. + - description: Gate of HDMI-PHY IP APB bus. + - description: Gate of HDMI TMDS clock. + - description: Gate of HDMI pixel clock. + - description: TMDS clock generated by HDMI-PHY. + - description: MUX used to switch between oscclk and tmds_clko, + respectively if HDMI-PHY is off and operational. + - description: Pixel clock generated by HDMI-PHY. + - description: MUX used to switch between oscclk and pixel_clko, + respectively if HDMI-PHY is off and operational. + - description: Oscillator clock, used as parent of following *_user + clocks in case HDMI-PHY is not operational. + - description: Gate of HDMI SPDIF clock. + clock-names: + items: + - const: hdmi_pclk + - const: hdmi_i_pclk + - const: i_tmds_clk + - const: i_pixel_clk + - const: tmds_clko + - const: tmds_clko_user + - const: pixel_clko + - const: pixel_clko_user + - const: oscclk + - const: i_spdif_clk + required: + - samsung,sysreg-phandle + else: + properties: + clocks: + items: + - description: Gate of HDMI IP bus clock. + - description: Gate of HDMI special clock. + - description: Pixel special clock, one of the two possible inputs + of HDMI clock mux. + - description: HDMI PHY clock output, one of two possible inputs of + HDMI clock mux. + - description: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. + clock-names: + items: + - const: hdmi + - const: sclk_hdmi + - const: sclk_pixel + - const: sclk_hdmiphy + - const: mout_hdmi + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + hdmi@13970000 { + compatible = "samsung,exynos5433-hdmi"; + reg = <0x13970000 0x70000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_disp CLK_PCLK_HDMI>, + <&cmu_disp CLK_PCLK_HDMIPHY>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>, + <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>, + <&xxti>, + <&cmu_disp CLK_SCLK_HDMI_SPDIF>; + clock-names = "hdmi_pclk", + "hdmi_i_pclk", + "i_tmds_clk", + "i_pixel_clk", + "tmds_clko", + "tmds_clko_user", + "pixel_clko", + "pixel_clko_user", + "oscclk", + "i_spdif_clk"; + phy = <&hdmiphy>; + ddc = <&hsi2c_11>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,sysreg-phandle = <&syscon_disp>; + #sound-dai-cells = <0>; + + hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo6_reg>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_to_tv: endpoint { + remote-endpoint = <&tv_to_hdmi>; + }; + }; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml new file mode 100644 index 000000000000..ba40284ac66f --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Mixer + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: + Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data + inputs before passing it to an output device. The output is passed to HDMI. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos4210-mixer + - samsung,exynos4212-mixer + - samsung,exynos5250-mixer + - samsung,exynos5420-mixer + - const: samsung,exynos5-mixer + deprecated: true + + clocks: + minItems: 3 + items: + - description: Gate of Mixer IP bus clock. + - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi. + - description: HDMI Special clock, one of the two possible inputs of + mixer mux. + - description: Video Processor clock. + - description: Mixer mux clock. + - description: Mixer Special clock. + + clock-names: + minItems: 3 + items: + - const: mixer + - const: hdmi + - const: sclk_hdmi + - const: vp + - const: mout_mixer + - const: sclk_mixer + + interconnects: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + minItems: 1 + items: + - description: Mixer memory region. + - description: Video Processor memory region. + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos4210-mixer + - samsung,exynos4212-mixer + then: + properties: + clocks: + minItems: 6 + maxItems: 6 + regs: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: samsung,exynos4212-mixer + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + regs: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5-mixer + - samsung,exynos5250-mixer + - samsung,exynos5420-mixer + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + regs: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mixer@14450000 { + compatible = "samsung,exynos5250-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MIXER>, + <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", + "hdmi", + "sclk_hdmi"; + iommus = <&sysmmu_tv>; + power-domains = <&pd_disp1>; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml new file mode 100644 index 000000000000..6f796835ea03 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + DECON (Display and Enhancement Controller) is the Display Controller for the + Exynos5433 series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +properties: + compatible: + enum: + - samsung,exynos5433-decon + - samsung,exynos5433-decon-tv + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: pclk + - const: aclk_decon + - const: aclk_smmu_decon0x + - const: aclk_xiu_decon0x + - const: pclk_smmu_decon0x + - const: aclk_smmu_decon1x + - const: aclk_xiu_decon1x + - const: pclk_smmu_decon1x + - const: sclk_decon_vclk + - const: sclk_decon_eclk + - const: dsd + + interrupts: + minItems: 3 + maxItems: 4 + description: | + Interrupts depend on mode of work: + - video mode: vsync + - command mode: lcd_sys + - command mode with software trigger: lcd_sys, te + + interrupt-names: + minItems: 3 + items: + - const: fifo + - const: vsync + - const: lcd_sys + - const: te + + iommus: + minItems: 2 + maxItems: 2 + + iommu-names: + items: + - const: m0 + - const: m1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Contains a port which is connected to mic node. + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,disp-sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface. + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - ports + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_PCLK_DECON>, + <&cmu_disp CLK_ACLK_DECON>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_XIU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>, + <&cmu_disp CLK_SCLK_DSD>; + clock-names = "pclk", + "aclk_decon", + "aclk_smmu_decon0x", + "aclk_xiu_decon0x", + "pclk_smmu_decon0x", + "aclk_smmu_decon1x", + "aclk_xiu_decon1x", + "pclk_smmu_decon1x", + "sclk_decon_vclk", + "sclk_decon_eclk", + "dsd"; + power-domains = <&pd_disp>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + samsung,disp-sysreg = <&syscon_disp>; + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; + iommu-names = "m0", "m1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml new file mode 100644 index 000000000000..01fccb138ebd --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is + not capable of transferring high resoltuion frame data as DECON can send. MIC + solves this problem by compressing the frame data by 1/2 before it is + transferred through MIPI DSI. The compressed frame data must be uncompressed + in the panel PCB. + +properties: + compatible: + const: samsung,exynos5433-mic + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: pclk_mic0 + - const: sclk_rgb_vclk_to_mic0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Contains a port which is connected to mic node. + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,disp-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface. + +required: + - compatible + - clocks + - clock-names + - ports + - reg + - samsung,disp-syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + image-processor@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", + "sclk_rgb_vclk_to_mic0"; + power-domains = <&pd_disp>; + samsung,disp-syscon = <&syscon_disp>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml new file mode 100644 index 000000000000..afa137d47922 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + DECON (Display and Enhancement Controller) is the Display Controller for the + Exynos7 series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +properties: + compatible: + const: samsung,exynos7-decon + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: pclk_decon0 + - const: aclk_decon0 + - const: decon0_eclk + - const: decon0_vclk + + display-timings: + $ref: ../panel/display-timings.yaml# + + i80-if-timings: + type: object + description: timing configuration for lcd i80 interface support + properties: + cs-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of address signal is enabled until + chip select is enabled. + default: 0 + + wr-active: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is enabled. + default: 1 + + wr-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is disabled until write + signal is disabled. + default: 0 + + wr-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS signal is enabled until + write signal is enabled. + default: 0 + + interrupts: + items: + - description: FIFO level + - description: VSYNC + - description: LCD system + + interrupt-names: + items: + - const: fifo + - const: vsync + - const: lcd_sys + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos7-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@13930000 { + compatible = "samsung,exynos7-decon"; + reg = <0x13930000 0x1000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_disp 100>, /* PCLK_DECON_INT */ + <&clock_disp 101>, /* ACLK_DECON_INT */ + <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */ + <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */ + clock-names = "pclk_decon0", + "aclk_decon0", + "decon0_eclk", + "decon0_vclk"; + pinctrl-0 = <&lcd_clk &pwm1_out>; + pinctrl-names = "default"; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml new file mode 100644 index 000000000000..9cf5f120d516 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + enum: + - samsung,s3c2443-fimd + - samsung,s3c6400-fimd + - samsung,s5pv210-fimd + - samsung,exynos3250-fimd + - samsung,exynos4210-fimd + - samsung,exynos5250-fimd + - samsung,exynos5420-fimd + + '#address-cells': + const: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: sclk_fimd + - const: fimd + + display-timings: + $ref: ../panel/display-timings.yaml# + + i80-if-timings: + type: object + description: | + Timing configuration for lcd i80 interface support. + The parameters are defined as:: + VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? + : : : : : + Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX + | cs-setup+1 | : : : + |<---------->| : : : + Chip Select ???????????????|____________:____________:____________|?? + | wr-setup+1 | | wr-hold+1 | + |<---------->| |<---------->| + Write Enable ????????????????????????????|____________|??????????????? + | wr-active+1| + |<---------->| + Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- + + properties: + cs-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of address signal is enabled until + chip select is enabled. + default: 0 + + wr-active: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is enabled. + default: 1 + + wr-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is disabled until write + signal is disabled. + default: 0 + + wr-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS signal is enabled until + write signal is enabled. + default: 0 + + iommus: + minItems: 1 + maxItems: 2 + + iommu-names: + items: + - const: m0 + - const: m1 + + interrupts: + items: + - description: FIFO level + - description: VSYNC + - description: LCD system + + interrupt-names: + items: + - const: fifo + - const: vsync + - const: lcd_sys + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,invert-vden: + type: boolean + description: + Video enable signal is inverted. + + samsung,invert-vclk: + type: boolean + description: + Video clock signal is inverted. + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to System Register syscon. + + '#size-cells': + const: 0 + +patternProperties: + "^port@[0-4]+$": + $ref: /schemas/graph.yaml#/properties/port + description: | + Contains ports with port with index:: + 0 - for CAMIF0 input, + 1 - for CAMIF1 input, + 2 - for CAMIF2 input, + 3 - for parallel output, + 4 - for write-back interface + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5420-fimd + then: + properties: + iommus: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + + fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; + samsung,sysreg = <&sys_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml index 3d107e9434be..d0a5592bd89d 100644 --- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml +++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml @@ -45,6 +45,8 @@ properties: ports: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Should contain a list of phandles pointing to display interface port of DPU devices. diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml index de0c678b3c29..564ea845c82e 100644 --- a/Documentation/devicetree/bindings/display/ste,mcde.yaml +++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -58,8 +58,8 @@ patternProperties: "^dsi@[0-9a-f]+$": description: subnodes for the three DSI host adapters type: object - allOf: - - $ref: dsi-controller.yaml# + $ref: dsi-controller.yaml# + properties: compatible: const: ste,mcde-dsi diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 781c1868b0b8..5c7d2cbc4aac 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -88,8 +88,7 @@ properties: The DSS DPI output port node from video port 2 ti,am65x-oldi-io-ctrl: - $ref: "/schemas/types.yaml#/definitions/phandle-array" - maxItems: 1 + $ref: "/schemas/types.yaml#/definitions/phandle" description: phandle to syscon device node mapping OLDI IO_CTRL registers. The mapped range should point to OLDI_DAT0_IO_CTRL, map it and diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index e72748496fd9..4b817f5dc30e 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -24,6 +24,8 @@ properties: dma-masters: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Array of phandles to the DMA controllers the router can direct the signal to. diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index 75ad898c59bc..47c46af25536 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -22,6 +22,9 @@ description: | https://static.dev.sifive.com/FU540-C000-v1.0.pdf +allOf: + - $ref: "dma-controller.yaml#" + properties: compatible: items: @@ -41,13 +44,12 @@ required: - compatible - reg - interrupts - - '#dma-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | - dma@3000000 { + dma-controller@3000000 { compatible = "sifive,fu540-c000-pdma"; reg = <0x3000000 0x8000>; interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>; diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index f751796531c9..7b1833d6caa2 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -46,7 +46,7 @@ examples: #dma-cells = <3>; dma-requests = <128>; dma-channels = <16>; - dma-masters = <&dma1 &dma2>; + dma-masters = <&dma1>, <&dma2>; clocks = <&timer_clk>; }; diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml new file mode 100644 index 000000000000..c0a1408b12ec --- /dev/null +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP DMA Engine + +description: | + The Xilinx ZynqMP DMA engine supports memory to memory transfers, + memory to device and device to memory transfers. It also has flow + control and rate control support for slave/peripheral dma access. + +maintainers: + - Michael Tretter <m.tretter@pengutronix.de> + +allOf: + - $ref: "../dma-controller.yaml#" + +properties: + "#dma-cells": + const: 1 + + compatible: + const: xlnx,zynqmp-dma-1.0 + + reg: + description: memory map for gdma/adma module access + maxItems: 1 + + interrupts: + description: DMA channel interrupt + maxItems: 1 + + clocks: + description: input clocks + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: clk_main + - const: clk_apb + + xlnx,bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 64 + - 128 + description: AXI bus width in bits + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + dma-coherent: + description: present if dma operations are coherent + +required: + - "#dma-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + + fpd_dma_chan1: dma-controller@fd500000 { + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0xfd500000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 117 0x4>; + #dma-cells = <1>; + clock-names = "clk_main", "clk_apb"; + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; + xlnx,bus-width = <128>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt deleted file mode 100644 index 07a5a7aa9ea0..000000000000 --- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt +++ /dev/null @@ -1,26 +0,0 @@ -Xilinx ZynqMP DMA engine, it does support memory to memory transfers, -memory to device and device to memory transfers. It also has flow -control and rate control support for slave/peripheral dma access. - -Required properties: -- compatible : Should be "xlnx,zynqmp-dma-1.0" -- reg : Memory map for gdma/adma module access. -- interrupts : Should contain DMA channel interrupt. -- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64 -- clock-names : List of input clocks "clk_main", "clk_apb" - (see clock bindings for details) - -Optional properties: -- dma-coherent : Present if dma operations are coherent. - -Example: -++++++++ -fpd_dma_chan1: dma@fd500000 { - compatible = "xlnx,zynqmp-dma-1.0"; - reg = <0x0 0xFD500000 0x1000>; - interrupt-parent = <&gic>; - interrupts = <0 117 4>; - clock-names = "clk_main", "clk_apb"; - xlnx,bus-width = <128>; - dma-coherent; -}; diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml index c8b91207f34d..7959d40ded5a 100644 --- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml +++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml @@ -43,7 +43,6 @@ properties: performance-domains: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 description: A phandle and performance domain specifier as defined by bindings of the performance controller/provider specified by phandle. diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index c078796ae1b5..80a28781845d 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -162,6 +162,16 @@ properties: don't need a type. enum: [ 100, 200, 300 ] + vendor,int-array-variable-length-and-constrained-values: + description: Array might define what type of elements might be used (e.g. + their range). + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + child-node: description: Child nodes are just another property from a json-schema perspective. @@ -207,6 +217,10 @@ allOf: then: required: - foo-supply + else: + # If otherwise the property is not allowed: + properties: + foo-supply: false # Altering schema depending on presence of properties is usually done by # dependencies (see above), however some adjustments might require if: - if: diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 590743883802..948e2a38beed 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -364,7 +364,7 @@ examples: firmware { scmi { compatible = "arm,scmi-smc"; - shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; arm,smc-id = <0xc3000001>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml index 23b346bd1252..1f9322925e7c 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml @@ -43,6 +43,7 @@ properties: by remote SCP firmware for use by SCPI message protocol should be specified in any order. minItems: 1 + maxItems: 4 shmem: description: @@ -51,6 +52,7 @@ properties: be any memory reserved for the purpose of this communication between the processors. minItems: 1 + maxItems: 4 power-controller: type: object @@ -235,8 +237,8 @@ examples: firmware { scpi { compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + mboxes = <&mailbox 1>, <&mailbox 2>; + shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>; scpi_sensors1: sensors { compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml new file mode 100644 index 000000000000..fcf0011b8e6d --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QEMU Firmware Configuration bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + Various QEMU emulation / virtualization targets provide the following + Firmware Configuration interface on the "virt" machine type: + + - A write-only, 16-bit wide selector (or control) register, + - a read-write, 64-bit wide data register. + + QEMU exposes the control and data register to guests as memory mapped + registers; their location is communicated to the guest's UEFI firmware in the + DTB that QEMU places at the bottom of the guest's DRAM. + + The authoritative guest-side hardware interface documentation to the fw_cfg + device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. + + +properties: + compatible: + const: qemu,fw-cfg-mmio + + reg: + maxItems: 1 + description: | + * Bytes 0x0 to 0x7 cover the data register. + * Bytes 0x8 to 0x9 cover the selector register. + * Further registers may be appended to the region in case of future interface + revisions / feature bits. + + dma-coherent: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + fw-cfg@9020000 { + compatible = "qemu,fw-cfg-mmio"; + reg = <0x9020000 0xa>; + }; +... diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml new file mode 100644 index 000000000000..963b926e30a7 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/gnss-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Global Navigation Satellite Systems (GNSS) + receiver devices + +maintainers: + - Johan Hovold <johan@kernel.org> + +description: | + This document defines device tree properties common to Global Navigation + Satellite System receivers. + +properties: + $nodename: + pattern: "^gnss(@.*)?$" + + lna-supply: + description: A separate regulator supplying power for the Low Noise + Amplifier (LNA). This is an amplifier connected between the GNSS + device and the receiver antenna. + + enable-gpios: + description: A GPIO line that will enable the GNSS receiver when + asserted. If this line is active low, the GPIO phandle should + consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating + system can rely on asserting the line to enable the GNSS device. + maxItems: 1 + + timepulse-gpios: + description: When a timepulse is provided to the GNSS device using a + GPIO line, this is used. + maxItems: 1 + + current-speed: + description: The baudrate in bits per second of the device as it comes + online, current active speed. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + gnss { + compatible = "u-blox,neo-8"; + vcc-supply = <&gnss_reg>; + timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + current-speed = <4800>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt deleted file mode 100644 index d6dc9c0d8249..000000000000 --- a/Documentation/devicetree/bindings/gnss/gnss.txt +++ /dev/null @@ -1,37 +0,0 @@ -GNSS Receiver DT binding - -This documents the binding structure and common properties for GNSS receiver -devices. - -A GNSS receiver node is a node named "gnss" and typically resides on a serial -bus (e.g. UART, I2C or SPI). - -Please refer to the following documents for generic properties: - - Documentation/devicetree/bindings/serial/serial.yaml - Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties: - -- compatible : A string reflecting the vendor and specific device the node - represents - -Optional properties: -- lna-supply : Separate supply for an LNA -- enable-gpios : GPIO used to enable the device -- timepulse-gpios : Time pulse GPIO - -Example: - -serial@1234 { - compatible = "ns16550a"; - - gnss { - compatible = "u-blox,neo-8"; - - vcc-supply = <&gnss_reg>; - timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - - current-speed = <4800>; - }; -}; diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt deleted file mode 100644 index f4252b6b660b..000000000000 --- a/Documentation/devicetree/bindings/gnss/sirfstar.txt +++ /dev/null @@ -1,46 +0,0 @@ -SiRFstar-based GNSS Receiver DT binding - -SiRFstar chipsets are used in GNSS-receiver modules produced by several -vendors and can use UART, SPI or I2C interfaces. - -Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic -properties. - -Required properties: - -- compatible : Must be one of - - "fastrax,uc430" - "linx,r4" - "wi2wi,w2sg0004" - "wi2wi,w2sg0008i" - "wi2wi,w2sg0084i" - -- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD) - -Required properties (I2C): -- reg : I2C slave address - -Required properties (SPI): -- reg : SPI chip select address - -Optional properties: - -- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF) -- sirf,wakeup-gpios : GPIO used to determine device power state - (pin name: RFPWRUP, WAKEUP) -- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM) - -Example: - -serial@1234 { - compatible = "ns16550a"; - - gnss { - compatible = "wi2wi,w2sg0084i"; - - vcc-supply = <&gnss_reg>; - sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml new file mode 100644 index 000000000000..991599cdaa6b --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/sirfstar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiRFstar GNSS Receiver Device Tree Bindings + +maintainers: + - Johan Hovold <johan@kernel.org> + +description: + The SiRFstar GNSS receivers have incarnated over the years in different + chips, starting from the SiRFstarIII which was a chip that was introduced in + 2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired + by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was + acquired by Samsung, while some products remained with CSR. In 2014 CSR + was acquired by Qualcomm who still sell some of the SiRF products. + + SiRF chips can be used over UART, I2C or SPI buses. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + enum: + - csr,gsd4t + - csr,csrg05ta03-icje-r + - fastrax,uc430 + - linx,r4 + - wi2wi,w2sg0004 + - wi2wi,w2sg0008i + - wi2wi,w2sg0084i + + reg: + description: + The I2C Address, SPI chip select address. Not required on UART buses. + + vcc-supply: + description: + Main voltage regulator, pin names such as 3V3_IN, VCC, VDD. + + reset-gpios: + maxItems: 1 + description: An optional active low reset line, should be flagged with + GPIO_ACTIVE_LOW. + + sirf,onoff-gpios: + maxItems: 1 + description: GPIO used to power on and off device, pin name ON_OFF. + + sirf,wakeup-gpios: + maxItems: 1 + description: GPIO used to determine device power state, pin names such + as RFPWRUP, WAKEUP. + +required: + - compatible + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + gnss { + compatible = "wi2wi,w2sg0084i"; + vcc-supply = <&gnss_vcc_reg>; + reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + current-speed = <38400>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml index 396101a223e7..35a760cfd343 100644 --- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml @@ -6,6 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: U-blox GNSS Receiver Device Tree Bindings +allOf: + - $ref: gnss-common.yaml# + maintainers: - Johan Hovold <johan@kernel.org> @@ -29,27 +32,20 @@ properties: description: > Main voltage regulator - timepulse-gpios: - maxItems: 1 - description: > - Time pulse GPIO - u-blox,extint-gpios: maxItems: 1 description: > GPIO connected to the "external interrupt" input pin - + v-bckp-supply: description: > Backup voltage regulator - current-speed: true - required: - compatible - vcc-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index b6a6e742b66d..dc0fc8fc4839 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -190,14 +190,6 @@ examples: "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27"; }; - - ts3a227@3b { - compatible = "ti,ts3a227e"; - reg = <0x3b>; - interrupt-parent = <&gpio99>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; - ti,micbias = <0>; /* 2.1V */ - }; }; - | diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml new file mode 100644 index 000000000000..ea2303c0e143 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C for Atmel/Microchip platforms + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91rm9200-i2c + - atmel,at91sam9261-i2c + - atmel,at91sam9260-i2c + - atmel,at91sam9g20-i2c + - atmel,at91sam9g10-i2c + - atmel,at91sam9x5-i2c + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + - items: + - const: microchip,sama7g5-i2c + - const: microchip,sam9x60-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-frequency: + default: 100000 + + dmas: + items: + - description: TX DMA Channel Specifier + - description: RX DMA Channel Specifier + + dma-names: + items: + - const: tx + - const: rx + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum number of data the RX and TX FIFOs can store for + FIFO capable I2C controllers. + + scl-gpios: true + + sda-gpios: true + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - clocks + +allOf: + - $ref: "i2c-controller.yaml" + - if: + properties: + compatible: + contains: + enum: + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + - microchip,sama7g5-i2c + then: + properties: + i2c-sda-hold-time-ns: + description: + TWD hold time + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/gpio/gpio.h> + + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g20-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + pagesize = <128>; + }; + }; + + i2c1: i2c@f8034600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8034600 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(11)>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(12)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0>; + atmel,fifo-size = <16>; + i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt deleted file mode 100644 index 2015f50aed0f..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ /dev/null @@ -1,82 +0,0 @@ -I2C for Atmel platforms - -Required properties : -- compatible : Must be one of: - "atmel,at91rm9200-i2c", - "atmel,at91sam9261-i2c", - "atmel,at91sam9260-i2c", - "atmel,at91sam9g20-i2c", - "atmel,at91sam9g10-i2c", - "atmel,at91sam9x5-i2c", - "atmel,sama5d4-i2c", - "atmel,sama5d2-i2c", - "microchip,sam9x60-i2c". -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- #address-cells = <1>; -- #size-cells = <0>; -- clocks: phandles to input clocks. - -Optional properties: -- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 -- dmas: A list of two dma specifiers, one for each entry in dma-names. -- dma-names: should contain "tx" and "rx". -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable I2C controllers. -- i2c-sda-hold-time-ns: TWD hold time, only available for: - "atmel,sama5d4-i2c", - "atmel,sama5d2-i2c", - "microchip,sam9x60-i2c". -- scl-gpios: specify the gpio related to SCL pin -- sda-gpios: specify the gpio related to SDA pin -- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c - bus recovery, call it "gpio" state -- Child nodes conforming to i2c bus binding - - -Examples : - -i2c0: i2c@fff84000 { - compatible = "atmel,at91sam9g20-i2c"; - reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&twi0_clk>; - clock-frequency = <400000>; - - 24c512@50 { - compatible = "atmel,24c512"; - reg = <0x50>; - pagesize = <128>; - } -} - -i2c0: i2c@f8034600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0xf8034600 0x100>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(11)>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(12)>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0>; - atmel,fifo-size = <16>; - i2c-sda-hold-time-ns = <336>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c0>; - pinctrl-1 = <&pinctrl_i2c0_gpio>; - sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - wm8731: wm8731@1a { - compatible = "wm8731"; - reg = <0x1a>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index c167958ae2a9..01720e338b4c 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -88,9 +88,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/imx5-clock.h> - #include <dt-bindings/clock/vf610-clock.h> - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> i2c@83fc4000 { compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; @@ -99,6 +97,9 @@ examples: clocks = <&clks IMX5_CLK_I2C2_GATE>; }; + - | + #include <dt-bindings/clock/vf610-clock.h> + i2c@40066000 { compatible = "fsl,vf610-i2c"; reg = <0x40066000 0x1000>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml index 98c6fcf7bf26..018e1b944424 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -73,6 +73,7 @@ examples: clock-frequency = <100000>; }; + - | /* MPC5200B based board */ i2c@3d00 { #address-cells = <1>; @@ -84,6 +85,7 @@ examples: fsl,preserve-clocking; }; + - | /* MPC8544 base board */ i2c@3100 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt deleted file mode 100644 index 66ae46d3bc2f..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Samsung's I2C controller - -The Samsung's I2C controller is used to interface with I2C devices. - -Required properties: - - compatible: value should be either of the following. - (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. - (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. - (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used - inside HDMIPHY block found on several samsung SoCs - (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as - a host to SATA PHY controller on an internal bus. - - reg: physical base address of the controller and length of memory mapped - region. - - interrupts: interrupt number to the cpu. - - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. - -Required for all cases except "samsung,s3c2440-hdmiphy-i2c": - - Samsung GPIO variant (deprecated): - - gpios: The order of the gpios should be the following: <SDA, SCL>. - The gpio specifier depends on the gpio controller. Required in all - cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output - lines are permanently wired to the respective clienta - - Pinctrl variant (preferred, if available): - - pinctrl-0: Pin control group to be used for this controller. - - pinctrl-names: Should contain only one value - "default". - -Optional properties: - - samsung,i2c-slave-addr: Slave address in multi-master environment. If not - specified, default value is 0. - - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not - specified, the default value in Hz is 100000. - - samsung,sysreg-phandle - handle to syscon used to control the system registers - -Example: - - i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = <345>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <100000>; - /* Samsung GPIO variant begins here */ - gpios = <&gpd1 2 0 /* SDA */ - &gpd1 3 0 /* SCL */>; - /* Samsung GPIO variant ends here */ - /* Pinctrl variant begins here */ - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - /* Pinctrl variant ends here */ - #address-cells = <1>; - #size-cells = <0>; - - wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml index febde6cc5f69..af6d64a6da6e 100644 --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -69,8 +69,7 @@ examples: #size-cells = <0>; reg = <0x10054000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <56>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; clocks = <&cgu JZ4780_CLK_SMB4>; pinctrl-names = "default"; @@ -86,7 +85,6 @@ examples: compatible = "nxp,pcf8563"; reg = <0x51>; - interrupt-parent = <&gpf>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index 402fd125e010..f4b235a87ac6 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -20,6 +20,7 @@ properties: - renesas,riic-r7s72100 # RZ/A1H - renesas,riic-r7s9210 # RZ/A2M - renesas,riic-r9a07g044 # RZ/G2{L,LC} + - renesas,riic-r9a07g054 # RZ/V2L - const: renesas,riic-rz # RZ/A or RZ/G2L reg: @@ -75,6 +76,7 @@ if: contains: enum: - renesas,riic-r9a07g044 + - renesas,riic-r9a07g054 then: required: - resets diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml new file mode 100644 index 000000000000..84051b0129c2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC I2C Controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + enum: + - samsung,s3c2410-i2c + - samsung,s3c2440-i2c + # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs: + - samsung,s3c2440-hdmiphy-i2c + # For s3c2440-like I2C used as a host to SATA PHY controller on an + # internal bus: + - samsung,exynos5-sata-phy-i2c + + '#address-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: i2c + + gpios: + description: | + The order of the GPIOs should be the following:: <SDA, SCL>. The GPIO + specifier depends on the gpio controller. Required in all cases except + for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are + permanently wired to the respective client. + This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead. + deprecated: yes + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,i2c-max-bus-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Desired frequency in Hz of the bus. + default: 100000 + + samsung,i2c-sda-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay (in ns) applied to data line (SDA) edges. + default: 0 + + samsung,i2c-slave-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Slave address in multi-master environment. + default: 0 + + samsung,sysreg-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: Pandle to syscon used to control the system registers. + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2440-hdmiphy-i2c + - samsung,exynos5-sata-phy-i2c + then: + properties: + gpios: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2410-i2c + - samsung,s3c2440-i2c + - samsung,s3c2440-hdmiphy-i2c + then: + required: + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@12c60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + eeprom@50 { + compatible = "samsung,s524ad0xd1"; + reg = <0x50>; + }; + }; + + i2c@12ce0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + phy-i2c@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; + }; + + i2c@121d0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SATA_PHYI2C>; + clock-names = "i2c"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + + phy-i2c@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 46b62e1c9273..dccbb18b6dc0 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -25,16 +25,9 @@ allOf: i2c-scl-falling-time-ns: default: 10 - - st,syscfg-fmp: - description: Use to set Fast Mode Plus bit within SYSCFG when - Fast Mode Plus speed is selected by slave. - Format is phandle to syscfg / register offset within - syscfg / register bitmask for FMP bit. - $ref: "/schemas/types.yaml#/definitions/phandle-array" - items: - minItems: 3 - maxItems: 3 + else: + properties: + st,syscfg-fmp: false - if: properties: @@ -87,6 +80,16 @@ properties: minimum: 1 maximum: 1000000 + st,syscfg-fmp: + description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode + Plus speed is selected by slave. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to syscfg + - description: register offset within syscfg + - description: register bitmask for FMP bit + required: - compatible - reg @@ -147,4 +150,3 @@ examples: i2c-scl-falling-time-ns = <20>; st,syscfg-fmp = <&syscfg 0x4 0x2>; }; -... diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml index 721878d5b7af..2ee04e03bc22 100644 --- a/Documentation/devicetree/bindings/input/adc-joystick.yaml +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -61,11 +61,10 @@ patternProperties: description: EV_ABS specific event code generated by the axis. abs-range: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - description: minimum value - - description: maximum value + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: minimum value + - description: maximum value description: > Minimum and maximum values produced by the axis. For an ABS_X axis this will be the left-most and right-most diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index cbb24f9bb609..5a911be0c2ea 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -121,6 +121,8 @@ properties: qcom,bcm-voters: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | List of phandles to qcom,bcm-voter nodes that are required by this interconnect to send RPMh commands. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index cfb3ec27bd2b..b7197f78e158 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -138,6 +138,8 @@ properties: properties: affinity: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Should be a list of phandles to CPU nodes (as described in Documentation/devicetree/bindings/arm/cpus.yaml). @@ -273,11 +275,11 @@ examples: ppi-partitions { part0: interrupt-partition-0 { - affinity = <&cpu0 &cpu2>; + affinity = <&cpu0>, <&cpu2>; }; part1: interrupt-partition-1 { - affinity = <&cpu1 &cpu3>; + affinity = <&cpu1>, <&cpu3>; }; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index 3d89668573e8..88c46e61732e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -77,6 +77,8 @@ properties: ti,unmapped-event-sources: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Array of phandles to DMA controllers where the unmapped events originate. diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml index 0f26fe14c8e2..97e8c471a5e8 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml @@ -101,6 +101,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 32 + items: + maxItems: 1 description: | List of phandle to the local arbiters in the current Socs. Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort @@ -167,8 +169,8 @@ examples: interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb4 &larb5>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml index 5159a87f3fa7..8854569ca3a6 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -70,6 +70,12 @@ properties: renesas,ipmmu-main: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to main IPMMU + - description: the interrupt bit number associated with the particular + cache IPMMU device. The interrupt bit number needs to match the main + IPMMU IMSSTR register. Only used by cache IPMMU instances. description: Reference to the main IPMMU phandle plus 1 cell. The cell is the interrupt bit number associated with the particular cache IPMMU diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml index 625082bf3892..f5822f4ea667 100644 --- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml @@ -23,6 +23,8 @@ properties: leds: description: A list of LED nodes $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 brightness-levels: description: diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index c7ed2871da06..9362b1ef9e88 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -32,8 +32,7 @@ properties: patternProperties: "^multi-led@[0-9a-b]$": type: object - allOf: - - $ref: leds-class-multicolor.yaml# + $ref: leds-class-multicolor.yaml# description: This node represents one of the RGB LED devices on Turris Omnia. No subnodes need to be added for subchannels since this controller only diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml index c192b5feadc7..f12fe5b53f30 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml @@ -55,8 +55,7 @@ properties: patternProperties: '^multi-led@[0-9a-f]$': type: object - allOf: - - $ref: leds-class-multicolor.yaml# + $ref: leds-class-multicolor.yaml# properties: reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml index c3de96d10396..ee7fc3515d89 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml @@ -48,6 +48,10 @@ properties: allwinner,sram: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device description: Phandle to the device SRAM iommus: diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml index 1b3e1c4b99ed..2a14e3b0e004 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml @@ -58,11 +58,11 @@ properties: req_gpr is the gpr register offset of RX_ENABLE for the mipi phy. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset containing - CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. - maximum: 0xff + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset containing + CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. + maximum: 0xff interconnects: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index 66c5d392fa75..7e078424ca4d 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -48,6 +48,10 @@ properties: ti,camerrx-control: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to device control module + - description: offset to the control_camerarx_core register description: phandle to the device control module and offset to the control_camerarx_core register diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index 4db8690829cd..c886681f62a7 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -53,7 +53,7 @@ properties: maxItems: 1 mediatek,smi: - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle description: a phandle to the smi_common node. mediatek,larb-id: diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml index 044127788695..f152243f6b18 100644 --- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml @@ -45,6 +45,8 @@ properties: $ref: '/schemas/types.yaml#/definitions/phandle-array' minItems: 1 maxItems: 16 + items: + maxItems: 1 description: phandles of the PPMU events used by the controller. device-handle: diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index 4caadf73fc4a..d8b495f71282 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -38,18 +38,14 @@ properties: description: This property specifies the delay in usecs between the assertion of the CS and the first clock pulse. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 - - minimum: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 google,cros-ec-spi-msg-delay: description: This property specifies the delay in usecs between messages. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 - - minimum: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 google,has-vbc-nvram: description: diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index 0922536b1811..d681a4676f06 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -96,8 +96,7 @@ patternProperties: rockchip,boot-ecc-strength: enum: [16, 24, 40, 60, 70] - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | If specified it indicates that a different BCH/ECC setting is supported by the boot ROM. diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index 8d8560a67abf..098b2bf7d976 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -29,6 +29,10 @@ properties: allwinner,sram: description: Phandle to the device SRAM $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device required: - compatible diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml index 2cd145a642f1..8bad328b184d 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml @@ -56,10 +56,10 @@ properties: offset). $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The phandle to the system control region. - - description: The register offset. - - description: The CAN instance number. + - items: + - description: The phandle to the system control region. + - description: The register offset. + - description: The CAN instance number. resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index b7f9803c1c6d..26aa0830eea1 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -104,6 +104,7 @@ properties: - description: Tx Buffers 0-32 elements / 0-576 words minimum: 0 maximum: 32 + minItems: 1 power-domains: description: diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 3f0ee17c1461..e52db841bb8c 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -84,12 +84,12 @@ properties: req_bit is the bit offset of CAN stop request. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset of CAN stop request. - maximum: 0xff - - description: The 'req_bit' is the bit offset of CAN stop request. - maximum: 0x1f + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f fsl,clk-source: description: | diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml index 91a3554ca950..f98c53dc1894 100644 --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -33,6 +33,7 @@ properties: - items: - enum: - renesas,r9a07g044-canfd # RZ/G2{L,LC} + - renesas,r9a07g054-canfd # RZ/V2L - const: renesas,rzg2l-canfd # RZ/G2L family - const: renesas,r8a779a0-canfd # R-Car V3U diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt deleted file mode 100644 index 6c559981d110..000000000000 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt +++ /dev/null @@ -1,92 +0,0 @@ -Cortina Systems Gemini Ethernet Controller -========================================== - -This ethernet controller is found in the Gemini SoC family: -StorLink SL3512 and SL3516, also known as Cortina Systems -CS3512 and CS3516. - -Required properties: -- compatible: must be "cortina,gemini-ethernet" -- reg: must contain the global registers and the V-bit and A-bit - memory areas, in total three register sets. -- syscon: a phandle to the system controller -- #address-cells: must be specified, must be <1> -- #size-cells: must be specified, must be <1> -- ranges: should be state like this giving a 1:1 address translation - for the subnodes - -The subnodes represents the two ethernet ports in this device. -They are not independent of each other since they share resources -in the parent node, and are thus children. - -Required subnodes: -- port0: contains the resources for ethernet port 0 -- port1: contains the resources for ethernet port 1 - -Required subnode properties: -- compatible: must be "cortina,gemini-ethernet-port" -- reg: must contain two register areas: the DMA/TOE memory and - the GMAC memory area of the port -- interrupts: should contain the interrupt line of the port. - this is nominally a level interrupt active high. -- resets: this must provide an SoC-integrated reset line for - the port. -- clocks: this should contain a handle to the PCLK clock for - clocking the silicon in this port -- clock-names: must be "PCLK" - -Optional subnode properties: -- phy-mode: see ethernet.txt -- phy-handle: see ethernet.txt - -Example: - -mdio-bus { - (...) - phy0: ethernet-phy@1 { - reg = <1>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@3 { - reg = <3>; - device_type = "ethernet-phy"; - }; -}; - - -ethernet@60000000 { - compatible = "cortina,gemini-ethernet"; - reg = <0x60000000 0x4000>, /* Global registers, queue */ - <0x60004000 0x2000>, /* V-bit */ - <0x60006000 0x2000>; /* A-bit */ - syscon = <&syscon>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gmac0: ethernet-port@0 { - compatible = "cortina,gemini-ethernet-port"; - reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ - <0x6000a000 0x2000>; /* Port 0 GMAC */ - interrupt-parent = <&intcon>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon GEMINI_RESET_GMAC0>; - clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; - clock-names = "PCLK"; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - - gmac1: ethernet-port@1 { - compatible = "cortina,gemini-ethernet-port"; - reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ - <0x6000e000 0x2000>; /* Port 1 GMAC */ - interrupt-parent = <&intcon>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon GEMINI_RESET_GMAC1>; - clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; - clock-names = "PCLK"; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml new file mode 100644 index 000000000000..cc01b9b5752a --- /dev/null +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cortina Systems Gemini Ethernet Controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This ethernet controller is found in the Gemini SoC family: + StorLink SL3512 and SL3516, also known as Cortina Systems + CS3512 and CS3516. + +properties: + compatible: + const: cortina,gemini-ethernet + + reg: + minItems: 3 + description: must contain the global registers and the V-bit and A-bit + memory areas, in total three register sets. + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +#The subnodes represents the two ethernet ports in this device. +#They are not independent of each other since they share resources +#in the parent node, and are thus children. +patternProperties: + "^ethernet-port@[0-9]+$": + type: object + description: contains the resources for ethernet port + allOf: + - $ref: ethernet-controller.yaml# + properties: + compatible: + const: cortina,gemini-ethernet-port + + reg: + items: + - description: DMA/TOE memory + - description: GMAC memory area of the port + + interrupts: + maxItems: 1 + description: should contain the interrupt line of the port. + this is nominally a level interrupt active high. + + resets: + maxItems: 1 + description: this must provide an SoC-integrated reset line for the port. + + clocks: + maxItems: 1 + description: this should contain a handle to the PCLK clock for + clocking the silicon in this port + + clock-names: + const: PCLK + + required: + - reg + - compatible + - interrupts + - resets + - clocks + - clock-names + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + + ethernet@60000000 { + compatible = "cortina,gemini-ethernet"; + reg = <0x60000000 0x4000>, /* Global registers, queue */ + <0x60004000 0x2000>, /* V-bit */ + <0x60006000 0x2000>; /* A-bit */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gmac0: ethernet-port@0 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ + <0x6000a000 0x2000>; /* Port 0 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC0>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + gmac1: ethernet-port@1 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ + <0x6000e000 0x2000>; /* Port 1 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC1>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml index e60867c7c571..a6b6b36a3f81 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml @@ -34,6 +34,8 @@ properties: full routing information must be given, not just the one hop routes to neighbouring switches $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 ethernet: description: diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 34c5463abcec..817794e56227 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -13,6 +13,10 @@ properties: $nodename: pattern: "^ethernet(@.*)?$" + label: + $ref: /schemas/types.yaml#/definitions/string + description: Human readable label on a port of a box. + local-mac-address: description: Specifies the MAC address that was assigned to the network device. diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index fd8371e31867..daa2f79a294f 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -158,11 +158,13 @@ properties: fsl,stop-mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to general purpose register node + - description: the gpr register offset for ENET stop request + - description: the gpr bit offset for ENET stop request description: Register bits of stop mode control, the format is <&gpr req_gpr req_bit>. - gpr is the phandle to general purpose register node. - req_gpr is the gpr register offset for ENET stop request. - req_bit is the gpr bit offset for ENET stop request. mdio: $ref: mdio.yaml# diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index 67eaf02dda80..4e1b79818aff 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -29,12 +29,18 @@ properties: queue-rx: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX queue node + - description: RX queue instance to use description: phandle to the RX queue on the NPE queue-txready: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TX READY queue node + - description: TX READY queue instance to use description: phandle to the TX READY queue on the NPE phy-mode: true @@ -43,7 +49,10 @@ properties: intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the NPE this ethernet instance is using + - description: the NPE instance to use description: phandle to the NPE this ethernet instance is using and the instance to use in the second cell diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml index 4dcd53c3e0b4..e6329febb60c 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml @@ -25,39 +25,62 @@ properties: intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + items: + - description: phandle to the NPE this HSS instance is using + - description: the NPE instance number description: phandle to the NPE this HSS instance is using and the instance to use in the second cell intel,queue-chl-rxtrig: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX trigger queue on the NPE + - description: the queue instance number description: phandle to the RX trigger queue on the NPE intel,queue-chl-txready: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TX ready queue on the NPE + - description: the queue instance number description: phandle to the TX ready queue on the NPE intel,queue-pkt-rx: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number description: phandle to the packet RX queue on the NPE intel,queue-pkt-tx: $ref: '/schemas/types.yaml#/definitions/phandle-array' maxItems: 4 + items: + items: + - description: phandle to the TX queue on the NPE + - description: the queue instance number description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE intel,queue-pkt-rxfree: $ref: '/schemas/types.yaml#/definitions/phandle-array' maxItems: 4 + items: + items: + - description: phandle to the RXFREE queue on the NPE + - description: the queue instance number description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and RXFREE3 queues on the NPE intel,queue-pkt-txdone: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TXDONE queue on the NPE + - description: the queue instance number description: phandle to the packet TXDONE queue on the NPE cts-gpios: diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml new file mode 100644 index 000000000000..ee0a504bdb24 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml @@ -0,0 +1,191 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip VSC7514 Ethernet switch controller + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + Bindings for the Microchip VSC7514 switch driver + + The VSC7514 switch driver handles up to 11 ports and can inject/extract + packets using CPU. Additionally, PTP is supported as well as FDMA for faster + packet extraction/injection. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: mscc,vsc7514-switch + + reg: + items: + - description: system target + - description: rewriter target + - description: qs target + - description: PTP target + - description: Port0 target + - description: Port1 target + - description: Port2 target + - description: Port3 target + - description: Port4 target + - description: Port5 target + - description: Port6 target + - description: Port7 target + - description: Port8 target + - description: Port9 target + - description: Port10 target + - description: QSystem target + - description: Analyzer target + - description: S0 target + - description: S1 target + - description: S2 target + - description: fdma target + + reg-names: + items: + - const: sys + - const: rew + - const: qs + - const: ptp + - const: port0 + - const: port1 + - const: port2 + - const: port3 + - const: port4 + - const: port5 + - const: port6 + - const: port7 + - const: port8 + - const: port9 + - const: port10 + - const: qsys + - const: ana + - const: s0 + - const: s1 + - const: s2 + - const: fdma + + interrupts: + minItems: 1 + items: + - description: PTP ready + - description: register based extraction + - description: frame dma based extraction + + interrupt-names: + minItems: 1 + items: + - const: ptp_rdy + - const: xtr + - const: fdma + + ethernet-ports: + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + additionalProperties: false + + patternProperties: + "^port@[0-9a-f]+$": + type: object + description: Ethernet ports handled by the switch + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + description: Switch port number + + phy-handle: true + + phy-mode: true + + fixed-link: true + + mac-address: true + + required: + - reg + - phy-mode + + oneOf: + - required: + - phy-handle + - required: + - fixed-link + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + switch@1010000 { + compatible = "mscc,vsc7514-switch"; + reg = <0x1010000 0x10000>, + <0x1030000 0x10000>, + <0x1080000 0x100>, + <0x10e0000 0x10000>, + <0x11e0000 0x100>, + <0x11f0000 0x100>, + <0x1200000 0x100>, + <0x1210000 0x100>, + <0x1220000 0x100>, + <0x1230000 0x100>, + <0x1240000 0x100>, + <0x1250000 0x100>, + <0x1260000 0x100>, + <0x1270000 0x100>, + <0x1280000 0x100>, + <0x1800000 0x80000>, + <0x1880000 0x10000>, + <0x1040000 0x10000>, + <0x1050000 0x10000>, + <0x1060000 0x10000>, + <0x1a0 0x1c4>; + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana", "s0", "s1", "s2", "fdma"; + interrupts = <18 21 16>; + interrupt-names = "ptp_rdy", "xtr", "fdma"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phy-mode = "internal"; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + phy-mode = "internal"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt deleted file mode 100644 index 3b6290b45ce5..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt +++ /dev/null @@ -1,83 +0,0 @@ -Microsemi Ocelot network Switch -=============================== - -The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513, -VSC7514) - -Required properties: -- compatible: Should be "mscc,vsc7514-switch" -- reg: Must contain an (offset, length) pair of the register set for each - entry in reg-names. -- reg-names: Must include the following entries: - - "sys" - - "rew" - - "qs" - - "ptp" (optional due to backward compatibility) - - "qsys" - - "ana" - - "portX" with X from 0 to the number of last port index available on that - switch -- interrupts: Should contain the switch interrupts for frame extraction, - frame injection and PTP ready. -- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain - "ptp_rdy" which is optional due to backward compatibility. -- ethernet-ports: A container for child nodes representing switch ports. - -The ethernet-ports container has the following properties - -Required properties: - -- #address-cells: Must be 1 -- #size-cells: Must be 0 - -Each port node must have the following mandatory properties: -- reg: Describes the port address in the switch - -Port nodes may also contain the following optional standardised -properties, described in binding documents: - -- phy-handle: Phandle to a PHY on an MDIO bus. See - Documentation/devicetree/bindings/net/ethernet.txt for details. - -Example: - - switch@1010000 { - compatible = "mscc,vsc7514-switch"; - reg = <0x1010000 0x10000>, - <0x1030000 0x10000>, - <0x1080000 0x100>, - <0x10e0000 0x10000>, - <0x11e0000 0x100>, - <0x11f0000 0x100>, - <0x1200000 0x100>, - <0x1210000 0x100>, - <0x1220000 0x100>, - <0x1230000 0x100>, - <0x1240000 0x100>, - <0x1250000 0x100>, - <0x1260000 0x100>, - <0x1270000 0x100>, - <0x1280000 0x100>, - <0x1800000 0x80000>, - <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", - "port2", "port3", "port4", "port5", "port6", - "port7", "port8", "port9", "port10", "qsys", - "ana"; - interrupts = <18 21 22>; - interrupt-names = "ptp_rdy", "xtr", "inj"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - port0: port@0 { - reg = <0>; - phy-handle = <&phy0>; - }; - port1: port@1 { - reg = <1>; - phy-handle = <&phy1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index ee4afe361fac..011363166789 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -54,6 +54,10 @@ properties: intf_mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the GPR syscon + - description: the offset of the GPR register description: Should be phandle/offset pair. The phandle to the syscon node which encompases the GPR register, and the offset of the GPR register. diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index aad5a9f3f962..e602761f7b14 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -66,6 +66,10 @@ properties: socionext,syscon-phy-mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures phy mode + - description: ID of MAC instance description: A phandle to syscon with one argument that configures phy mode. The argument is the ID of MAC instance. diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 3d8a3b763ae6..5c93167b3b41 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -74,6 +74,10 @@ properties: st,syscon: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to the syscon node which encompases the glue register + - description: offset of the control register description: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 07a00f53adbf..31bf825c6598 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -88,8 +88,7 @@ properties: type: object description: CPSW external ports - allOf: - - $ref: ethernet-controller.yaml# + $ref: ethernet-controller.yaml# properties: reg: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 4b97a0f1175b..b8281d8be940 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -136,6 +136,11 @@ properties: ti,syscon-efuse: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the system control device node which + provides access to efuse + - description: offset to efuse registers??? description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 1a81bf70c88c..a30419ef550a 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -103,12 +103,6 @@ properties: clocks: maxItems: 8 - assigned-clocks: - maxItems: 1 - - assigned-clocks-parents: - maxItems: 1 - required: - clocks diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 3216c999f0e1..249967d8d750 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -69,6 +69,10 @@ properties: mediatek,mtd-eeprom: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to MTD partition + - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index a835e64bc6f5..ee79e13b5fe0 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -38,34 +38,6 @@ required: - reg - ranges -patternProperties: - "^.*@[0-9a-f]+$": - type: object - - properties: - reg: - maxItems: 1 - description: - Offset and size in bytes within the storage device. - - bits: - $ref: /schemas/types.yaml#/definitions/uint32-array - maxItems: 1 - items: - items: - - minimum: 0 - maximum: 7 - description: - Offset in bit within the address range specified by reg. - - minimum: 1 - description: - Size in bit within the address range specified by reg. - - required: - - reg - - additionalProperties: false - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml new file mode 100644 index 000000000000..e70b2a60cb9a --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: U-Boot environment variables + +description: | + U-Boot uses environment variables to store device parameters and + configuration. They may be used for booting process, setup or keeping end user + info. + + Data is stored using U-Boot specific formats (variant specific header and NUL + separated key-value pairs). + + Environment data can be stored on various storage entities, e.g.: + 1. Raw flash partition + 2. UBI volume + + This binding allows marking storage device (as containing env data) and + specifying used format. + + Right now only flash partition case is covered but it may be extended to e.g. + UBI volumes in the future. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + oneOf: + - description: A standalone env data block + const: u-boot,env + - description: Two redundant blocks with active one flagged + const: u-boot,env-redundant-bool + - description: Two redundant blocks with active having higher counter + const: u-boot,env-redundant-count + + reg: + maxItems: 1 + +additionalProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x40000>; + label = "u-boot"; + read-only; + }; + + env: partition@40000 { + compatible = "u-boot,env"; + reg = <0x40000 0x10000>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 15a76bcd6d42..da0f09eedc0c 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -177,6 +177,8 @@ patternProperties: for the functioning of the current device at the current OPP (where this property is present). $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 patternProperties: '^opp-microvolt-': diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 643a6333b07b..252e5b72aee0 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -25,6 +25,8 @@ properties: - fsl,imx6qp-pcie - fsl,imx7d-pcie - fsl,imx8mq-pcie + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie reg: items: diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml index aef63a542f34..c87821be158b 100644 --- a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml +++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml @@ -35,6 +35,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 12 + items: + maxItems: 1 description: List of phandles for the CPUs connected to this DSU instance. required: diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml index 347d0cdfb80d..5d54b0a0e873 100644 --- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -47,10 +47,18 @@ properties: intel,syscfg: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to Chip configuration registers + - description: ComboPhy instance id description: Chip configuration registers handle and ComboPhy instance id intel,hsio: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to HSIO registers + - description: ComboPhy instance id description: HSIO registers handle and ComboPhy instance id on NOC intel,aggregation: diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 267b695215b6..dc287d428e49 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -76,8 +76,7 @@ patternProperties: connector: type: object - allOf: - - $ref: ../connector/usb-connector.yaml + $ref: /schemas/connector/usb-connector.yaml properties: vbus-supply: true diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml new file mode 100644 index 000000000000..c61574e10b2a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,exynos-hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC HDMI PHY + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Joonyoung Shim <jy0922.shim@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos4210-hdmiphy + - samsung,exynos4212-hdmiphy + - const: samsung,exynos5-hdmiphy + deprecated: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-phy@38 { + compatible = "samsung,exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index f78d3246fbdc..8694b9eb52f9 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -45,6 +45,10 @@ properties: syscon-phy-power: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the system control module + - description: register offset to power on/off the PHY description: phandle/offset pair. Phandle to the system control module and register offset to power on/off the PHY. diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index d316cc082107..acd60c85b4cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -29,6 +29,8 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 + items: + maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle-array description: | A cell of phandles to external controller nodes: diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index a44691d9c57d..53e963e090f2 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -39,6 +39,10 @@ properties: canaan,k210-sysctl-power: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of the K210 system controller node + - description: offset of its power domain control register description: | phandle of the K210 system controller node and offset of its power domain control register. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index 6953c958ff7c..161088a8be33 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -44,6 +44,8 @@ properties: mediatek,pctl-regmap: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 minItems: 1 maxItems: 2 description: | diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 83a18d0331b1..335ffc1353b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -41,11 +41,13 @@ properties: maxItems: 1 st,syscfg: - description: Should be phandle/offset/mask - - Phandle to the syscon node which includes IRQ mux selection. - - The offset of the IRQ mux selection register. - - The field mask of IRQ mux, needed if different of 0xf. + description: Phandle+args to the syscon node which includes IRQ mux selection. $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: syscon node which includes IRQ mux selection + - description: The offset of the IRQ mux selection register + - description: The field mask of IRQ mux, needed if different of 0xf st,package: description: diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 3143ed9a3313..889091b9814f 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -29,6 +29,8 @@ properties: domain-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Phandles of idle states that defines the available states for the power-domain provider. The idle state definitions are compatible with the @@ -42,6 +44,8 @@ properties: operating-points-v2: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Phandles to the OPP tables of power domains provided by a power domain provider. If the provider provides a single power domain only or all diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml index 391897d897f2..4d293b2b2f84 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -35,6 +35,8 @@ properties: cpus: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Array of phandles pointing to CPU cores, which should match the order of CPU cores used by the WUPCR and PSTR registers in the Advanced Power diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index 9b9d71087466..3deb0fc8dfd3 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -129,6 +129,8 @@ $defs: pm_qos: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | A number of phandles to qos blocks which need to be saved and restored while power domain switches state. diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index c73abb2ff513..2dda91587dc3 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -14,6 +14,9 @@ description: | phandle in monitored-battery. If specified the driver uses the charge-full-design-microamp-hours property of the battery. +allOf: + - $ref: power-supply.yaml# + properties: compatible: const: cellwise,cw2015 @@ -37,9 +40,6 @@ properties: minimum: 250 power-supplies: - description: - Specifies supplies used for charging the battery connected to this gauge - $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 8 # Should be enough diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index 259760167759..531b67225c74 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -12,6 +12,8 @@ maintainers: properties: power-supplies: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: This property is added to a supply in order to list the devices which supply it power, referenced by their phandles. diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml index 72e8f274c791..99f506d6b0a0 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -46,9 +46,7 @@ additionalProperties: false patternProperties: "^i2c@[1-4]$": type: object - - allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# + $ref: /schemas/i2c/i2c-controller.yaml# examples: - | diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index ed560ee8714e..a9b66ececccf 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -213,6 +213,8 @@ properties: is 2-way - all coupled regulators should be linked with each other. A regulator should not be coupled with its supplier. $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + maxItems: 1 regulator-coupled-max-spread: description: Array of maximum spread between voltages of coupled regulators diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index df0191b1ceba..38bdaef4fa39 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -23,7 +23,7 @@ properties: - st,stm32mp1-booster st,syscfg: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle" description: phandle to system configuration controller. vdda-supply: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index 64c182428e94..a4409c398193 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -119,6 +119,12 @@ properties: qcom,halt-regs: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offsets within syscon for q6 halt registers + - description: offsets within syscon for modem halt registers + - description: offsets within syscon for nc halt registers description: Phandle reference to a syscon representing TCSR followed by the three offsets within syscon for q6, modem and nc halt registers. diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index b587c97c282b..be3d9b0e876b 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -29,17 +29,22 @@ properties: st,syscfg-holdboot: description: remote processor reset hold boot - - Phandle of syscon block. - - The offset of the hold boot setting register. - - The field mask of the hold boot. $ref: "/schemas/types.yaml#/definitions/phandle-array" - maxItems: 1 + items: + - items: + - description: Phandle of syscon block + - description: The offset of the hold boot setting register + - description: The field mask of the hold boot st,syscfg-tz: description: Reference to the system configuration which holds the RCC trust zone mode $ref: "/schemas/types.yaml#/definitions/phandle-array" - maxItems: 1 + items: + - items: + - description: Phandle of syscon block + - description: FIXME + - description: FIXME interrupts: description: Should contain the WWDG1 watchdog reset interrupt @@ -93,20 +98,32 @@ properties: $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote - maxItems: 1 + items: + - items: + - description: Phandle of syscon block + - description: FIXME + - description: FIXME st,syscfg-m4-state: $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the tamp register which exposes the Cortex-M4 state. - maxItems: 1 + items: + - items: + - description: Phandle of syscon block with the tamp register + - description: FIXME + - description: FIXME st,syscfg-rsc-tbl: $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the tamp register which references the Cortex-M4 resource table address. - maxItems: 1 + items: + - items: + - description: Phandle of syscon block with the tamp register + - description: FIXME + - description: FIXME st,auto-boot: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index 7b56497eec4d..cedbc5efdc56 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -79,6 +79,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. The regions should be defined as child nodes of the respective SRAM node, and @@ -140,6 +142,14 @@ examples: #address-cells = <2>; #size-cells = <2>; + mailbox0_cluster3: mailbox-0 { + #mbox-cells = <1>; + }; + + mailbox0_cluster4: mailbox-1 { + #mbox-cells = <1>; + }; + bus@100000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index d9c7e8c2b268..fb9605f0655b 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -95,8 +95,7 @@ patternProperties: addresses. Cache and memory access settings are provided through a Memory Protection Unit (MPU), programmable only from the R5Fs. - allOf: - - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# properties: compatible: @@ -189,6 +188,8 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. The regions should be defined as child nodes of the respective SRAM node, and @@ -236,6 +237,14 @@ examples: #address-cells = <2>; #size-cells = <2>; + mailbox0: mailbox-0 { + #mbox-cells = <1>; + }; + + mailbox1: mailbox-1 { + #mbox-cells = <1>; + }; + bus@100000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index c6c12129d6b7..1fdc2741c36e 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -123,13 +123,14 @@ properties: ti,bootreg: $ref: /schemas/types.yaml#/definitions/phandle-array - description: | - Should be a triple of the phandle to the System Control - Configuration region that contains the boot address - register, the register offset of the boot address - register within the System Control module, and the bit - shift within the register. This property is required for - all the DSP instances on OMAP4, OMAP5 and DRA7xx SoCs. + items: + - items: + - description: phandle to the System Control Configuration region + - description: register offset of the boot address register + - description: the bit shift within the register + description: + This property is required for all the DSP instances on OMAP4, OMAP5 + and DRA7xx SoCs. ti,autosuspend-delay-ms: description: | @@ -140,6 +141,8 @@ properties: ti,timers: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | One or more phandles to OMAP DMTimer nodes, that serve as System/Tick timers for the OS running on the remote @@ -156,6 +159,8 @@ properties: ti,watchdog-timers: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | One or more phandles to OMAP DMTimer nodes, used to serve as Watchdog timers for the processor cores. This diff --git a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml index a4bf757d6881..618105f079be 100644 --- a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml @@ -56,6 +56,16 @@ properties: If this property is present, then Linux will use the region for the default pool of the consistent DMA allocator. +if: + properties: + compatible: + contains: + const: restricted-dma-pool +then: + properties: + no-map: false + reusable: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml index b13514e6783d..86c2569ced97 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas RZ/G2L USBPHY Control +title: Renesas RZ/{G2L,V2L} USBPHY Control maintainers: - Biju Das <biju.das.jz@bp.renesas.com> @@ -18,6 +18,7 @@ properties: items: - enum: - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC} + - renesas,r9a07g054-usbphy-ctrl # RZ/V2L - const: renesas,rzg2l-usbphy-ctrl reg: diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml index c1527637eb74..3ce45456d867 100644 --- a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml +++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml @@ -9,7 +9,7 @@ title: Atmel AT91 True Random Number Generator maintainers: - Nicolas Ferre <nicolas.ferre@microchip.com> - Alexandre Belloni <alexandre.belloni@bootlin.com> - - Ludovic Desroches <ludovic.desroches@microchip.com> + - Claudiu Beznea <claudiu.beznea@microchip.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt deleted file mode 100644 index a08df97a69e6..000000000000 --- a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt +++ /dev/null @@ -1,17 +0,0 @@ -RDA Micro UART - -Required properties: -- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. -- reg : Offset and length of the register set for the device. -- interrupts : Should contain UART interrupt. -- clocks : Phandle to the input clock. - - -Example: - - uart2: serial@20a90000 { - compatible = "rda,8810pl-uart"; - reg = <0x20a90000 0x1000>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>; - }; diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml new file mode 100644 index 000000000000..5f4ed8221270 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/rda,8810pl-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro UART Interface + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: rda,8810pl-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + uart3: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index ea9c233052f3..a98ed66d092e 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -41,6 +41,10 @@ properties: samsung,sysreg: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register syscon node + - description: offset of SW_CONF register for this USI controller description: Should be phandle/offset pair. The phandle to System Register syscon node (for the same domain where this USI controller resides) and the offset diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 9d128b9e7deb..64461d432004 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -281,10 +281,7 @@ patternProperties: PRUSS INTC Node. Each PRUSS has a single interrupt controller instance that is common to all the PRU cores. This should be represented as an interrupt-controller node. - - allOf: - - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# - + $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# type: object mdio@[a-f0-9]+$: @@ -292,10 +289,7 @@ patternProperties: MDIO Node. Each PRUSS has an MDIO module that can be used to control external PHYs. The MDIO module used within the PRU-ICSS is an instance of the MDIO Controller used in TI Davinci SoCs. - - allOf: - - $ref: /schemas/net/ti,davinci-mdio.yaml# - + $ref: /schemas/net/ti,davinci-mdio.yaml# type: object "^(pru|rtu|txpru)@[0-9a-f]+$": @@ -305,10 +299,7 @@ patternProperties: inactive by using the standard DT string property, "status". The ICSSG IP present on K3 SoCs have additional auxiliary PRU cores with slightly different IP integration. - - allOf: - - $ref: /schemas/remoteproc/ti,pru-rproc.yaml# - + $ref: /schemas/remoteproc/ti,pru-rproc.yaml# type: object required: diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index 2e35aeaa8781..8b5be4b92f35 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -57,7 +57,7 @@ patternProperties: rate sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 description: phandle of the CPU DAI patternProperties: @@ -71,7 +71,7 @@ patternProperties: properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 description: phandle of the codec DAI required: diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 837e3faa63a9..233caa0ade87 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -62,13 +62,15 @@ patternProperties: description: Holds subnode which indicates cpu dai. type: object properties: - sound-dai: true + sound-dai: + maxItems: 1 codec: description: Holds subnode which indicates codec dai. type: object properties: - sound-dai: true + sound-dai: + maxItems: 1 required: - link-name diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml index d1816dd061cf..bb3a435722c7 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml +++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml @@ -59,13 +59,16 @@ patternProperties: description: Holds subnode which indicates cpu dai. type: object properties: - sound-dai: true + sound-dai: + maxItems: 1 codec: description: Holds subnode which indicates codec dai. type: object properties: - sound-dai: true + sound-dai: + minItems: 1 + maxItems: 2 fsl,mclk-equal-bclk: description: Indicates mclk can be equal to bclk, especially for sai interface diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 4bfda04b4608..4ecd4080bb96 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -69,19 +69,23 @@ patternProperties: description: Holds subnode which indicates cpu dai. type: object properties: - sound-dai: true + sound-dai: + maxItems: 1 platform: description: Holds subnode which indicates platform dai. type: object properties: - sound-dai: true + sound-dai: + maxItems: 1 codec: description: Holds subnode which indicates codec dai. type: object properties: - sound-dai: true + sound-dai: + minItems: 1 + maxItems: 4 required: - link-name diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index afdacffc9a7a..97f83eeaf091 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -27,7 +27,6 @@ properties: sound-dai: minItems: 2 maxItems: 2 - $ref: /schemas/types.yaml#/definitions/phandle-array description: | phandles to the I2S controller and bluetooth codec, in that order @@ -38,7 +37,7 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 description: phandle to the WM8994 CODEC required: - sound-dai diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 095775c598fa..ec50bcb4af5f 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -21,7 +21,6 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 description: phandle to the I2S controller required: @@ -31,7 +30,6 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 description: phandle to the WM1811 CODEC required: diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index e8122bc87362..db2513f3e168 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -37,18 +37,15 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array description: phandles to the I2S controllers codec: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: | - List of phandles to the CODEC nodes, - first entry must be corresponding to the MAX98090 CODEC and - the second entry must be the phandle of the HDMI IP block node. + items: + - description: phandle of the MAX98090 CODEC + - description: phandle of the HDMI IP block node samsung,audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array diff --git a/Documentation/devicetree/bindings/sound/sound-dai.yaml b/Documentation/devicetree/bindings/sound/sound-dai.yaml new file mode 100644 index 000000000000..61c6f7abc4e7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sound-dai.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/sound-dai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Digital Audio Interface consumer Device Tree Bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +select: true + +properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A phandle plus args to digital audio interface provider(s) + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 1538d11ce9a8..b3dbcba33e41 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -102,9 +102,11 @@ patternProperties: By default SAI sub-block is in asynchronous mode. Must contain the phandle and index of the SAI sub-block providing the synchronization. - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of the SAI sub-block + - description: index of the SAI sub-block st,iec60958: description: @@ -113,8 +115,7 @@ patternProperties: By default, custom protocol is assumed, meaning that protocol is configured according to protocol defined in related DAI link node, such as i2s, left justified, right justified, dsp and pdm protocols. - allOf: - - $ref: /schemas/types.yaml#/definitions/flag + $ref: /schemas/types.yaml#/definitions/flag "#clock-cells": description: Configure the SAI device as master clock provider. diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index d77c8283526d..2ad17b361db0 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -176,13 +176,12 @@ patternProperties: 4 - Drive weak low and active high 5 - Drive Hi-Z and active high - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - maximum: 15 - default: [2, 2] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + maximum: 15 + default: [2, 2] required: - compatible diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 0f4d40218400..ebb4d5f1cf4f 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -93,9 +93,7 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object - - allOf: - - $ref: spi-peripheral-props.yaml + $ref: spi-peripheral-props.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index f004779ba9b3..850a9841b110 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -66,9 +66,9 @@ examples: compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0>, + <&LITTLE_CPU_SLEEP_1>, + <&CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index 6278ccf16f3f..cc938d7ad1f3 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -37,8 +37,8 @@ properties: exit-latency-us: description: | - The exit latency constraint in microsecond for the injected idle state - for the device. It is the latency constraint to apply when selecting an + The exit latency constraint in microsecond for the injected idle state + for the device. It is the latency constraint to apply when selecting an idle state from among all the present ones. required: @@ -65,7 +65,7 @@ examples: capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <436>; #cooling-cells = <2>; /* min followed by max */ - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>; thermal-idle { #cooling-cells = <2>; duration-us = <10000>; @@ -81,7 +81,7 @@ examples: capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <436>; #cooling-cells = <2>; /* min followed by max */ - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>; thermal-idle { #cooling-cells = <2>; duration-us = <10000>; diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt deleted file mode 100644 index 7cf4a24601eb..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt +++ /dev/null @@ -1,26 +0,0 @@ -* ARMv7M System Timer - -ARMv7-M includes a system timer, known as SysTick. Current driver only -implements the clocksource feature. - -Required properties: -- compatible : Should be "arm,armv7m-systick" -- reg : The address range of the timer - -Required clocking property, have to be one of: -- clocks : The input clock of the timer -- clock-frequency : The rate in HZ in input of the ARM SysTick - -Examples: - -systick: timer@e000e010 { - compatible = "arm,armv7m-systick"; - reg = <0xe000e010 0x10>; - clocks = <&clk_systick>; -}; - -systick: timer@e000e010 { - compatible = "arm,armv7m-systick"; - reg = <0xe000e010 0x10>; - clock-frequency = <90000000>; -}; diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml new file mode 100644 index 000000000000..2bcade5d8ac6 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,armv7m-systick.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARMv7M System Timer + +maintainers: + - Alexandre Torgue <alexandre.torgue@foss.st.com> + - Fabrice Gasnier <fabrice.gasnier@foss.st.com> + +description: ARMv7-M includes a system timer, known as SysTick. + +properties: + compatible: + const: arm,armv7m-systick + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +oneOf: + - required: + - clocks + - required: + - clock-frequency + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clocks = <&clk_systick>; + }; + + - | + timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clock-frequency = <90000000>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt deleted file mode 100644 index ac3a5e887455..000000000000 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt +++ /dev/null @@ -1,21 +0,0 @@ -Nuvoton NPCM7xx timer - -Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit -timer counters. - -Required properties: -- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750, or - "nuvoton,wpcm450-timer" for Hermon WPCM450. -- reg : Offset and length of the register set for the device. -- interrupts : Contain the timer interrupt of timer 0. -- clocks : phandle of timer reference clock (usually a 25 MHz clock). - -Example: - -timer@f0008000 { - compatible = "nuvoton,npcm750-timer"; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf0008000 0x50>; - clocks = <&clk NPCM7XX_CLK_TIMER>; -}; - diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml new file mode 100644 index 000000000000..0cbc26a72151 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/nuvoton,npcm7xx-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM7xx timer + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +properties: + compatible: + enum: + - nuvoton,wpcm450-timer # for Hermon WPCM450 + - nuvoton,npcm750-timer # for Poleg NPCM750 + + reg: + maxItems: 1 + + interrupts: + items: + - description: The timer interrupt of timer 0 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + timer@f0008000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf0008000 0x50>; + clocks = <&clk NPCM7XX_CLK_TIMER>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml index 7fa7f977b44c..c399a019dde7 100644 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -24,6 +24,7 @@ properties: - renesas,r7s72100-ostm # RZ/A1H - renesas,r7s9210-ostm # RZ/A2M - renesas,r9a07g044-ostm # RZ/G2{L,LC} + - renesas,r9a07g054-ostm # RZ/V2L - const: renesas,ostm # Generic reg: @@ -54,6 +55,7 @@ if: contains: enum: - renesas,r9a07g044-ostm + - renesas,r9a07g054-ostm then: required: - resets diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index 8d5f4687add9..e64f46339079 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -44,6 +44,7 @@ properties: interrupts-extended: minItems: 1 + maxItems: 4095 additionalProperties: false @@ -56,10 +57,10 @@ examples: - | timer@2000000 { compatible = "sifive,fu540-c000-clint", "sifive,clint0"; - interrupts-extended = <&cpu1intc 3 &cpu1intc 7 - &cpu2intc 3 &cpu2intc 7 - &cpu3intc 3 &cpu3intc 7 - &cpu4intc 3 &cpu4intc 7>; + interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>, + <&cpu2intc 3>, <&cpu2intc 7>, + <&cpu3intc 3>, <&cpu3intc 7>, + <&cpu4intc 3>, <&cpu4intc 7>; reg = <0x2000000 0x10000>; }; ... diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index e68b1f991da9..320884336869 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -77,7 +77,7 @@ properties: - delta,ahe50dc-fan # Delta Electronics DPS-650-AB power supply - delta,dps650ab - # Delta Electronics DPS920AB 920W 54V Power Supply + # Delta Electronics DPS920AB 920W 54V Power Supply - delta,dps920ab # 1/4 Brick DC/DC Regulated Power Module - delta,q54sj108a2 @@ -123,13 +123,13 @@ properties: - ibm,cffps2 # Infineon IR36021 digital POL buck controller - infineon,ir36021 - # Infineon IR38060 Voltage Regulator + # Infineon IR38060 Voltage Regulator - infineon,ir38060 # Infineon IR38064 Voltage Regulator - infineon,ir38064 - # Infineon IR38164 Voltage Regulator + # Infineon IR38164 Voltage Regulator - infineon,ir38164 - # Infineon IR38263 Voltage Regulator + # Infineon IR38263 Voltage Regulator - infineon,ir38263 # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) - infineon,slb9635tt diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt deleted file mode 100644 index 02347b017abd..000000000000 --- a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Cadence Universal Flash Storage (UFS) Controller - -UFS nodes are defined to describe on-chip UFS host controllers. -Each UFS controller instance should have its own node. -Please see the ufshcd-pltfrm.txt for a list of all available properties. - -Required properties: -- compatible : Compatible list, contains one of the following controllers: - "cdns,ufshc" - Generic CDNS HCI, - "cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm PHY - complemented with the JEDEC version: - "jedec,ufs-2.0" - -- reg : Address and length of the UFS register set. -- interrupts : One interrupt mapping. -- freq-table-hz : Clock frequency table. - See the ufshcd-pltfrm.txt for details. -- clocks : List of phandle and clock specifier pairs. -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. "core_clk" is mandatory. - Depending on a type of a PHY, - the "phy_clk" clock can also be added, if needed. - -Example: - ufs@fd030000 { - compatible = "cdns,ufshc", "jedec,ufs-2.0"; - reg = <0xfd030000 0x10000>; - interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; - freq-table-hz = <0 0>, <0 0>; - clocks = <&ufs_core_clk>, <&ufs_phy_clk>; - clock-names = "core_clk", "phy_clk"; - }; diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml new file mode 100644 index 000000000000..d227dea368be --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/cdns,ufshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence Universal Flash Storage (UFS) Controller + +maintainers: + - Jan Kotas <jank@cadence.com> + +# Select only our matches, not all jedec,ufs-2.0 +select: + properties: + compatible: + contains: + enum: + - cdns,ufshc + - cdns,ufshc-m31-16nm + required: + - compatible + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + items: + - enum: + - cdns,ufshc + # CDNS UFS HC + M31 16nm PHY + - cdns,ufshc-m31-16nm + - const: jedec,ufs-2.0 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: core_clk + - const: phy_clk + - const: ref_clk + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ufs@fd030000 { + compatible = "cdns,ufshc", "jedec,ufs-2.0"; + reg = <0xfd030000 0x10000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <0 0>, <0 0>; + clocks = <&ufs_core_clk>, <&ufs_phy_clk>; + clock-names = "core_clk", "phy_clk"; + }; diff --git a/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml new file mode 100644 index 000000000000..4432bfa0cbc7 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/hisilicon,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Universal Flash Storage (UFS) Controller + +maintainers: + - Li Wei <liwei213@huawei.com> + +# Select only our matches, not all jedec,ufs +select: + properties: + compatible: + contains: + enum: + - hisilicon,hi3660-ufs + - hisilicon,hi3670-ufs + required: + - compatible + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + oneOf: + - items: + - const: hisilicon,hi3660-ufs + - const: jedec,ufs-1.1 + - items: + - enum: + - hisilicon,hi3670-ufs + - const: jedec,ufs-2.1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ref_clk + - const: phy_clk + + reg: + items: + - description: UFS register address space + - description: UFS SYS CTRL register address space + + resets: + maxItems: 1 + + reset-names: + items: + - const: rst + +required: + - compatible + - reg + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/hi3670-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@ff3c0000 { + compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1"; + reg = <0x0 0xff3c0000 0x0 0x1000>, + <0x0 0xff3e0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, + <0 0>; + + resets = <&crg_rst 0x84 12>; + reset-names = "rst"; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml new file mode 100644 index 000000000000..32fd535a514a --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Universal Flash Storage (UFS) Controller + +maintainers: + - Stanley Chu <stanley.chu@mediatek.com> + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + enum: + - mediatek,mt8183-ufshci + - mediatek,mt8192-ufshci + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ufs + + phys: + maxItems: 1 + + reg: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - clocks + - clock-names + - phys + - reg + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@ff3c0000 { + compatible = "mediatek,mt8183-ufshci"; + reg = <0 0x11270000 0 0x2300>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>; + phys = <&ufsphy>; + + clocks = <&infracfg_ao CLK_INFRA_UFS>; + clock-names = "ufs"; + freq-table-hz = <0 0>; + + vcc-supply = <&mt_pmic_vemc_ldo_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml new file mode 100644 index 000000000000..dcd32c10205a --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -0,0 +1,244 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Flash Storage (UFS) Controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Andy Gross <agross@kernel.org> + +# Select only our matches, not all jedec,ufs-2.0 +select: + properties: + compatible: + contains: + const: qcom,ufshc + required: + - compatible + +properties: + compatible: + items: + - enum: + - qcom,msm8994-ufshc + - qcom,msm8996-ufshc + - qcom,msm8998-ufshc + - qcom,sdm845-ufshc + - qcom,sm6350-ufshc + - qcom,sm8150-ufshc + - qcom,sm8250-ufshc + - qcom,sm8350-ufshc + - qcom,sm8450-ufshc + - const: qcom,ufshc + - const: jedec,ufs-2.0 + + clocks: + minItems: 8 + maxItems: 11 + + clock-names: + minItems: 8 + maxItems: 11 + + interconnects: + minItems: 2 + maxItems: 2 + + interconnect-names: + items: + - const: ufs-ddr + - const: cpu-ufs + + iommus: + minItems: 1 + maxItems: 2 + + phys: + maxItems: 1 + + phy-names: + items: + - const: ufsphy + + power-domains: + maxItems: 1 + + reg: + minItems: 1 + maxItems: 2 + + resets: + maxItems: 1 + + '#reset-cells': + const: 1 + + reset-names: + items: + - const: rst + + reset-gpios: + maxItems: 1 + description: + GPIO connected to the RESET pin of the UFS memory device. + +required: + - compatible + - reg + +allOf: + - $ref: ufs-common.yaml + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-ufshc + - qcom,sm8250-ufshc + - qcom,sm8350-ufshc + - qcom,sm8450-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: rx_lane1_sync_clk + reg: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-ufshc + - qcom,sm6350-ufshc + - qcom,sm8150-ufshc + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: rx_lane1_sync_clk + - const: ice_core_clk + reg: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-ufshc + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: core_clk_src + - const: core_clk + - const: bus_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro_src + - const: core_clk_unipro + - const: core_clk_ice + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + reg: + minItems: 1 + maxItems: 1 + + # TODO: define clock bindings for qcom,msm8994-ufshc + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; + + power-domains = <&gcc UFS_PHY_GDSC>; + iommus = <&apps_smmu 0xe0 0x0>; + interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml index 95ac1c18334d..c949eb617313 100644 --- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -11,12 +11,11 @@ maintainers: description: | Each Samsung UFS host controller instance should have its own node. - This binding define Samsung specific binding other then what is used - in the common ufshcd bindings - [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt -properties: +allOf: + - $ref: ufs-common.yaml +properties: compatible: enum: - samsung,exynos7-ufs @@ -47,9 +46,6 @@ properties: - const: core_clk - const: sclk_unipro_main - interrupts: - maxItems: 1 - phys: maxItems: 1 @@ -67,13 +63,12 @@ properties: required: - compatible - reg - - interrupts - phys - phy-names - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml new file mode 100644 index 000000000000..671a70d95138 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/snps,tc-dwc-g210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare Universal Flash Storage (UFS) Controller + +maintainers: + - Li Wei <liwei213@huawei.com> + +# Select only our matches, not all jedec,ufs +select: + properties: + compatible: + contains: + enum: + - snps,dwc-ufshcd-1.40a + required: + - compatible + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + items: + - enum: + - snps,g210-tc-6.00-20bit + - snps,g210-tc-6.00-40bit + - const: snps,dwc-ufshcd-1.40a + - const: jedec,ufs-2.0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + ufs@d0000000 { + compatible = "snps,g210-tc-6.00-40bit", + "snps,dwc-ufshcd-1.40a", + "jedec,ufs-2.0"; + reg = <0xd0000000 0x10000>; + interrupts = <24>; + }; diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt deleted file mode 100644 index 71c0777960e9..000000000000 --- a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Universal Flash Storage (UFS) DesignWare Host Controller - -DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY. -Each UFS controller instance should have its own node. - -Required properties: -- compatible : compatible list must contain the PHY type & version: - "snps,g210-tc-6.00-20bit" - "snps,g210-tc-6.00-40bit" - complemented with the Controller IP version: - "snps,dwc-ufshcd-1.40a" - complemented with the JEDEC version: - "jedec,ufs-1.1" - "jedec,ufs-2.0" - -- reg : <registers mapping> -- interrupts : <interrupt mapping for UFS host controller IRQ> - -Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC: - dwc-ufs@d0000000 { - compatible = "snps,g210-tc-6.00-40bit", - "snps,dwc-ufshcd-1.40a", - "jedec,ufs-2.0"; - reg = < 0xd0000000 0x10000 >; - interrupts = < 24 >; - }; diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml index 4d13e6bc1c50..c5eca7735f76 100644 --- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml @@ -47,11 +47,10 @@ required: patternProperties: "^ufs@[0-9a-f]+$": - type: object + $ref: cdns,ufshc.yaml description: | - Cadence UFS controller node must be the child node. Refer - Documentation/devicetree/bindings/ufs/cdns,ufshc.txt for binding - documentation of child node + Cadence UFS controller node must be the child node. + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml new file mode 100644 index 000000000000..47a4e9e1a775 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/ufs-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for Universal Flash Storage (UFS) Host Controllers + +maintainers: + - Alim Akhtar <alim.akhtar@samsung.com> + - Avri Altman <avri.altman@wdc.com> + +properties: + clocks: true + + clock-names: true + + freq-table-hz: + items: + items: + - description: Minimum frequency for given clock in Hz + - description: Maximum frequency for given clock in Hz + description: | + Array of <min max> operating frequencies in Hz stored in the same order + as the clocks property. If this property is not defined or a value in the + array is "0" then it is assumed that the frequency is set by the parent + clock or a fixed rate clock source. + + interrupts: + maxItems: 1 + + lanes-per-direction: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 2 + description: + Number of lanes available per direction. Note that it is assume same + number of lanes is used both directions at once. + + vdd-hba-supply: + description: + Phandle to UFS host controller supply regulator node. + + vcc-supply: + description: + Phandle to VCC supply regulator node. + + vccq-supply: + description: + Phandle to VCCQ supply regulator node. + + vccq2-supply: + description: + Phandle to VCCQ2 supply regulator node. + + vcc-supply-1p8: + type: boolean + description: + For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This + boolean property when set, specifies to use low voltage range of + 1.7-1.95V. Note for external UFS cards this property is invalid and valid + VCC range is always 2.7-3.6V. + + vcc-max-microamp: + description: + Specifies max. load that can be drawn from VCC supply. + + vccq-max-microamp: + description: + Specifies max. load that can be drawn from VCCQ supply. + + vccq2-max-microamp: + description: + Specifies max. load that can be drawn from VCCQ2 supply. + +dependencies: + freq-table-hz: [ 'clocks' ] + +required: + - interrupts + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt deleted file mode 100644 index 0b83df1a5418..000000000000 --- a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Hisilicon Universal Flash Storage (UFS) Host Controller - -UFS nodes are defined to describe on-chip UFS hardware macro. -Each UFS Host Controller should have its own node. - -Required properties: -- compatible : compatible list, contains one of the following - - "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs - host controller present on Hi3660 chipset. - "hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs - host controller present on Hi3670 chipset. -- reg : should contain UFS register address space & UFS SYS CTRL register address, -- interrupts : interrupt number -- clocks : List of phandle and clock specifier pairs -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. "ref_clk", "phy_clk" is optional -- freq-table-hz : Array of <min max> operating frequencies stored in the same - order as the clocks property. If this property is not - defined or a value in the array is "0" then it is assumed - that the frequency is set by the parent clock or a - fixed rate clock source. -- resets : describe reset node register -- reset-names : reset node register, the "rst" corresponds to reset the whole UFS IP. - -Example: - - ufs: ufs@ff3b0000 { - compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1"; - /* 0: HCI standard */ - /* 1: UFS SYS CTRL */ - reg = <0x0 0xff3b0000 0x0 0x1000>, - <0x0 0xff3b1000 0x0 0x1000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, - <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; - clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0>, <0 0>; - /* offset: 0x84; bit: 12 */ - resets = <&crg_rst 0x84 12>; - reset-names = "rst"; - }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt deleted file mode 100644 index 63a953b672d2..000000000000 --- a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Mediatek Universal Flash Storage (UFS) Host Controller - -UFS nodes are defined to describe on-chip UFS hardware macro. -Each UFS Host Controller should have its own node. - -To bind UFS PHY with UFS host controller, the controller node should -contain a phandle reference to UFS M-PHY node. - -Required properties for UFS nodes: -- compatible : Compatible list, contains the following controller: - "mediatek,mt8183-ufshci" for MediaTek UFS host controller - present on MT8183 chipsets. - "mediatek,mt8192-ufshci" for MediaTek UFS host controller - present on MT8192 chipsets. -- reg : Address and length of the UFS register set. -- phys : phandle to m-phy. -- clocks : List of phandle and clock specifier pairs. -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. "ufs" is mandatory. - "ufs": ufshci core control clock. -- freq-table-hz : Array of <min max> operating frequencies stored in the same - order as the clocks property. If this property is not - defined or a value in the array is "0" then it is assumed - that the frequency is set by the parent clock or a - fixed rate clock source. -- vcc-supply : phandle to VCC supply regulator node. - -Example: - - ufsphy: phy@11fa0000 { - ... - }; - - ufshci@11270000 { - compatible = "mediatek,mt8183-ufshci"; - reg = <0 0x11270000 0 0x2300>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>; - phys = <&ufsphy>; - - clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>; - clock-names = "ufs"; - freq-table-hz = <0 0>; - - vcc-supply = <&mt_pmic_vemc_ldo_reg>; - }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt deleted file mode 100644 index fd59f93e9556..000000000000 --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY - -UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro. -Each UFS PHY node should have its own node. - -To bind UFS PHY with UFS host controller, the controller node should -contain a phandle reference to UFS PHY node. - -Required properties: -- compatible : compatible list, contains one of the following - - "qcom,ufs-phy-qmp-20nm" for 20nm ufs phy, - "qcom,ufs-phy-qmp-14nm" for legacy 14nm ufs phy, - "qcom,msm8996-ufs-phy-qmp-14nm" for 14nm ufs phy - present on MSM8996 chipset. -- reg : should contain PHY register address space (mandatory), -- reg-names : indicates various resources passed to driver (via reg proptery) by name. - Required "reg-names" is "phy_mem". -- #phy-cells : This property shall be set to 0 -- vdda-phy-supply : phandle to main PHY supply for analog domain -- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply -- clocks : List of phandle and clock specifier pairs -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. "ref_clk_src", "ref_clk", - "tx_iface_clk" & "rx_iface_clk" are mandatory but - "ref_clk_parent" is optional - -Optional properties: -- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply -- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply -- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply -- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply -- resets : specifies the PHY reset in the UFS controller - -Example: - - ufsphy1: ufsphy@fc597000 { - compatible = "qcom,ufs-phy-qmp-20nm"; - reg = <0xfc597000 0x800>; - reg-names = "phy_mem"; - #phy-cells = <0>; - vdda-phy-supply = <&pma8084_l4>; - vdda-pll-supply = <&pma8084_l12>; - vdda-phy-max-microamp = <50000>; - vdda-pll-max-microamp = <1000>; - clock-names = "ref_clk_src", - "ref_clk_parent", - "ref_clk", - "tx_iface_clk", - "rx_iface_clk"; - clocks = <&clock_rpm clk_ln_bb_clk>, - <&clock_gcc clk_pcie_1_phy_ldo >, - <&clock_gcc clk_ufs_phy_ldo>, - <&clock_gcc clk_gcc_ufs_tx_cfg_clk>, - <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; - resets = <&ufshc 0>; - }; - - ufshc: ufshc@fc598000 { - #reset-cells = <1>; - ... - phys = <&ufsphy1>; - phy-names = "ufsphy"; - }; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt deleted file mode 100644 index d0fee78e6203..000000000000 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ /dev/null @@ -1,90 +0,0 @@ -* Universal Flash Storage (UFS) Host Controller - -UFSHC nodes are defined to describe on-chip UFS host controllers. -Each UFS controller instance should have its own node. - -Required properties: -- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0" - - For Qualcomm SoCs must contain, as below, an - SoC-specific compatible along with "qcom,ufshc" and - the appropriate jedec string: - "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,sm8350-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0" -- interrupts : <interrupt mapping for UFS host controller IRQ> -- reg : <registers mapping> - -Optional properties: -- phys : phandle to UFS PHY node -- phy-names : the string "ufsphy" when is found in a node, along - with "phys" attribute, provides phandle to UFS PHY node -- vdd-hba-supply : phandle to UFS host controller supply regulator node -- vcc-supply : phandle to VCC supply regulator node -- vccq-supply : phandle to VCCQ supply regulator node -- vccq2-supply : phandle to VCCQ2 supply regulator node -- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V - or 2.7-3.6V. This boolean property when set, specifies - to use low voltage range of 1.7-1.95V. Note for external - UFS cards this property is invalid and valid VCC range is - always 2.7-3.6V. -- vcc-max-microamp : specifies max. load that can be drawn from vcc supply -- vccq-max-microamp : specifies max. load that can be drawn from vccq supply -- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply - -- clocks : List of phandle and clock specifier pairs -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. - "ref_clk" indicates reference clock frequency. - UFS host supplies reference clock to UFS device and UFS device - specification allows host to provide one of the 4 frequencies (19.2 MHz, - 26 MHz, 38.4 MHz, 52MHz) for reference clock. This "ref_clk" entry is - parsed and used to update the reference clock setting in device. - Defaults to 26 MHz(as per specification) if not specified by host. -- freq-table-hz : Array of <min max> operating frequencies stored in the same - order as the clocks property. If this property is not - defined or a value in the array is "0" then it is assumed - that the frequency is set by the parent clock or a - fixed rate clock source. --lanes-per-direction : number of lanes available per direction - either 1 or 2. - Note that it is assume same number of lanes is used both - directions at once. If not specified, default is 2 lanes per direction. -- #reset-cells : Must be <1> for Qualcomm UFS controllers that expose - PHY reset from the UFS controller. -- resets : reset node register -- reset-names : describe reset node register, the "rst" corresponds to reset the whole UFS IP. -- reset-gpios : A phandle and gpio specifier denoting the GPIO connected - to the RESET pin of the UFS memory device. - -Note: If above properties are not defined it can be assumed that the supply -regulators or clocks are always on. - -Example: - ufshc@fc598000 { - compatible = "jedec,ufs-1.1"; - reg = <0xfc598000 0x800>; - interrupts = <0 28 0>; - - vdd-hba-supply = <&xxx_reg0>; - vcc-supply = <&xxx_reg1>; - vcc-supply-1p8; - vccq-supply = <&xxx_reg2>; - vccq2-supply = <&xxx_reg3>; - vcc-max-microamp = 500000; - vccq-max-microamp = 200000; - vccq2-max-microamp = 200000; - - clocks = <&core 0>, <&ref 0>, <&phy 0>, <&iface 0>; - clock-names = "core_clk", "ref_clk", "phy_clk", "iface_clk"; - freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>; - resets = <&reset 0 1>; - reset-names = "rst"; - phys = <&ufsphy1>; - phy-names = "ufsphy"; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt index 710b782ccf65..171df79360ff 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt @@ -20,7 +20,7 @@ Example device node: refclk-type-hs = "dlmc_ref_clk0"; power = <0x00000002 0x00000002 0x00000001>; xhci@1690000000000 { - compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3"; + compatible = "cavium,octeon-7130-xhci", "snps,dwc3"; reg = <0x00016900 0x00000000 0x00000010 0x00000000>; interrupt-parent = <0x00000010>; interrupts = <0x00000009 0x00000004>; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index a39c76b89484..fd6e7c81426e 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -83,7 +83,7 @@ properties: - const: ss nvidia,xusb-padctl: - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the XUSB pad controller that is used to configure the USB pads used by the XUDC controller. diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 012fe80a7611..0bb841b28003 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -20,6 +20,7 @@ properties: - enum: - renesas,usbhs-r7s9210 # RZ/A2 - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} + - renesas,usbhs-r9a07g054 # RZ/V2L - const: renesas,rza2-usbhs - items: @@ -116,7 +117,9 @@ allOf: properties: compatible: contains: - const: renesas,usbhs-r9a07g044 + enum: + - renesas,usbhs-r9a07g044 + - renesas,usbhs-r9a07g054 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml index ead1571e0e43..b5a8c9814dd3 100644 --- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -32,9 +32,7 @@ properties: connector: type: object - - allOf: - - $ref: ../connector/usb-connector.yaml + $ref: /schemas/connector/usb-connector.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index 4f7a212fddd3..c1f0194ad0d5 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -92,7 +92,7 @@ examples: ranges; usb@2690000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x2690000 0x70000>; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; usb-phy = <&usb_phy>, <&usb_phy>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9d0e48f6e583..bb372e15bba4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -509,6 +509,9 @@ patternProperties: description: Himax Technologies, Inc. "^hirschmann,.*": description: Hirschmann Automation and Control GmbH + "^hisi,.*": + description: HiSilicon Limited (deprecated, use hisilicon) + deprecated: true "^hisilicon,.*": description: HiSilicon Limited. "^hit,.*": @@ -524,7 +527,9 @@ patternProperties: "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": - description: Hewlett Packard + description: Hewlett Packard Inc. + "^hpe,.*": + description: Hewlett Packard Enterprise "^hsg,.*": description: HannStar Display Co. "^holtek,.*": @@ -1200,6 +1205,9 @@ patternProperties: description: Synaptics Inc. "^synology,.*": description: Synology, Inc. + "^synopsys,.*": + description: Synopsys, Inc. (deprecated, use snps) + deprecated: true "^tbs,.*": description: TBS Technologies "^tbs-biometrics,.*": @@ -1385,6 +1393,8 @@ patternProperties: description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd. "^x-powers,.*": description: X-Powers + "^xen,.*": + description: Xen Hypervisor "^xes,.*": description: Extreme Engineering Solutions (X-ES) "^xiaomi,.*": diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml index 4b7a0273181c..10c22b5bd16a 100644 --- a/Documentation/devicetree/bindings/virtio/mmio.yaml +++ b/Documentation/devicetree/bindings/virtio/mmio.yaml @@ -20,6 +20,8 @@ properties: reg: maxItems: 1 + dma-coherent: true + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml index fb603a20e396..4ca8a31359a5 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml @@ -29,12 +29,6 @@ properties: clocks: maxItems: 1 - assigned-clocks: - maxItems: 1 - - assigned-clocks-parents: - maxItems: 1 - timeout-sec: true required: @@ -56,7 +50,7 @@ examples: interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pcc2 IMX7ULP_CLK_WDG1>; assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; - assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; timeout-sec = <40>; }; diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst index ea21c72aeb37..95ecf55559e5 100644 --- a/Documentation/devicetree/bindings/writing-schema.rst +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -118,22 +118,15 @@ The DT schema project must be installed in order to validate the DT schema binding documents and validate DTS files using the DT schema. The DT schema project can be installed with pip:: - pip3 install git+https://github.com/devicetree-org/dt-schema.git@master + pip3 install dtschema -Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be -installed. Ensure they are in your PATH (~/.local/bin by default). - -dtc must also be built with YAML output support enabled. This requires that -libyaml and its headers be installed on the host system. For some distributions -that involves installing the development package, such as: - -Debian:: +Note that 'dtschema' installation requires 'swig' and Python development files +installed first. On Debian/Ubuntu systems:: - apt-get install libyaml-dev + apt install swig python3-dev -Fedora:: - - dnf -y install libyaml-devel +Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be +installed. Ensure they are in your PATH (~/.local/bin by default). Running checks ~~~~~~~~~~~~~~ @@ -157,13 +150,14 @@ It is possible to run both in a single command:: make dt_binding_check dtbs_check -It is also possible to run checks with a single schema file by setting the -``DT_SCHEMA_FILES`` variable to a specific schema file. +It is also possible to run checks with a subset of matching schema files by +setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern. :: - make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml - make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml + make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml + make dt_binding_check DT_SCHEMA_FILES=/gpio/ + make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml json-schema Resources diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst index 2afe41a37148..8864b52d1195 100644 --- a/Documentation/devicetree/of_unittest.rst +++ b/Documentation/devicetree/of_unittest.rst @@ -24,7 +24,28 @@ from the unflattened device tree data structure. This interface is used by most of the device drivers in various use cases. -2. Test-data +2. Verbose Output (EXPECT) +========================== + +If unittest detects a problem it will print a warning or error message to +the console. Unittest also triggers warning and error messages from other +kernel code as a result of intentionally bad unittest data. This has led +to confusion as to whether the triggered messages are an expected result +of a test or whether there is a real problem that is independent of unittest. + +'EXPECT \ : text' (begin) and 'EXPECT / : text' (end) messages have been +added to unittest to report that a warning or error is expected. The +begin is printed before triggering the warning or error, and the end is +printed after triggering the warning or error. + +The EXPECT messages result in very noisy console messages that are difficult +to read. The script scripts/dtc/of_unittest_expect was created to filter +this verbosity and highlight mismatches between triggered warnings and +errors vs expected warnings and errors. More information is available +from 'scripts/dtc/of_unittest_expect --help'. + + +3. Test-data ============ The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains @@ -56,7 +77,7 @@ The assembly file is compiled into an object file (testcases.dtb.o), and is linked into the kernel image. -2.1. Adding the test data +3.1. Adding the test data ------------------------- Un-flattened device tree structure: @@ -191,7 +212,7 @@ properties are updated to the live tree's node by calling the function update_node_properties(). -2.2. Removing the test data +3.2. Removing the test data --------------------------- Once the test case execution is complete, selftest_data_remove is called in |