diff options
Diffstat (limited to 'Documentation/devicetree')
10 files changed, 17 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt index f2f2171e530e..9e5f73412cd7 100644 --- a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt +++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt @@ -5,7 +5,7 @@ can combine interrupt sources as a group and provide a single interrupt request for the group. The interrupt request from each group are connected to a parent interrupt controller, such as GIC in case of Exynos4210. -The interrupt combiner controller consists of multiple combiners. Upto eight +The interrupt combiner controller consists of multiple combiners. Up to eight interrupt sources can be connected to a combiner. The combiner outputs one combined interrupt for its eight interrupt sources. The combined interrupt is usually connected to a parent interrupt controller. @@ -14,8 +14,8 @@ A single node in the device tree is used to describe the interrupt combiner controller module (which includes multiple combiners). A combiner in the interrupt controller module shares config/control registers with other combiners. For example, a 32-bit interrupt enable/disable config register -can accommodate upto 4 interrupt combiners (with each combiner supporting -upto 8 interrupt sources). +can accommodate up to 4 interrupt combiners (with each combiner supporting +up to 8 interrupt sources). Required properties: - compatible: should be "samsung,exynos4210-combiner". diff --git a/Documentation/devicetree/bindings/arm/spear/shirq.txt b/Documentation/devicetree/bindings/arm/spear/shirq.txt index 13fbb8866bd6..715a013ed4bd 100644 --- a/Documentation/devicetree/bindings/arm/spear/shirq.txt +++ b/Documentation/devicetree/bindings/arm/spear/shirq.txt @@ -14,7 +14,7 @@ A single node in the device tree is used to describe the shared interrupt multiplexor (one node for all groups). A group in the interrupt controller shares config/control registers with other groups. For example, a 32-bit interrupt enable/disable config register can -accommodate upto 4 interrupt groups. +accommodate up to 4 interrupt groups. Required properties: - compatible: should be, either of diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index 66c75b2d6158..c40711e8e8f7 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -4,7 +4,7 @@ Reference [1] Si5351A/B/C Data Sheet http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf -The Si5351a/b/c are programmable i2c clock generators with upto 8 output +The Si5351a/b/c are programmable i2c clock generators with up to 8 output clocks. Si5351a also has a reduced pin-count package (MSOP10) where only 3 output clocks are accessible. The internal structure of the clock generators can be found in [1]. diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt index 726fd2122a13..1180d7814af8 100644 --- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt @@ -51,7 +51,7 @@ Optional properties: * card-detect-delay: Delay in milli-seconds before detecting card after card insert event. The default value is 0. -* supports-highspeed: Enables support for high speed cards (upto 50MHz) +* supports-highspeed: Enables support for high speed cards (up to 50MHz) * broken-cd: as documented in mmc core bindings. diff --git a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt index 2161334a7ca5..712baf6c3e24 100644 --- a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt +++ b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt @@ -1,7 +1,7 @@ 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also - the Axon bridge. To operate this needs to interact with a ths + the Axon bridge. To operate this needs to interact with a this special McMAL DMA controller, and sometimes an RGMII or ZMII interface. In addition to the nodes and properties described below, the node for the OPB bus on which the EMAC sits must have a diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt index 8bf89c643640..f11f295c8450 100644 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt @@ -2,7 +2,7 @@ Broadcom BCM2835 SPI0 controller The BCM2835 contains two forms of SPI master controller, one known simply as SPI0, and the other known as the "Universal SPI Master"; part of the -auxilliary block. This binding applies to the SPI0 controller. +auxiliary block. This binding applies to the SPI0 controller. Required properties: - compatible: Should be "brcm,bcm2835-spi". diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index cb47bfbcaeea..b5a86d20ee36 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -44,7 +44,7 @@ Example 1: In this example, the system uses only the first global timer }; Example 2: In this example, the MCT global and local timer interrupts are - connected to two seperate interrupt controllers. Hence, an + connected to two separate interrupt controllers. Hence, an interrupt-map is created to map the interrupts to the respective interrupt controllers. diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index ea840f7f9258..dc9dc8c87f15 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -12,7 +12,7 @@ AM33XX MUSB GLUE represents PERIPHERAL. - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2" represents PERIPHERAL. - - power : Should be "250". This signifies the controller can supply upto + - power : Should be "250". This signifies the controller can supply up to 500mA when operating in host mode. Example: diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index d4769f343d6c..57e71f6817d0 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -16,7 +16,7 @@ OMAP MUSB GLUE specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" represents PERIPHERAL. - - power : Should be "50". This signifies the controller can supply upto + - power : Should be "50". This signifies the controller can supply up to 100mA when operating in host mode. - usb-phy : the phandle for the PHY device diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index 0efedaad5165..2b6b3d3f0388 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -106,17 +106,18 @@ In the majority of cases, the machine identity is irrelevant, and the kernel will instead select setup code based on the machine's core CPU or SoC. On ARM for example, setup_arch() in arch/arm/kernel/setup.c will call setup_machine_fdt() in -arch/arm/kernel/devicetree.c which searches through the machine_desc +arch/arm/kernel/devtree.c which searches through the machine_desc table and selects the machine_desc which best matches the device tree data. It determines the best match by looking at the 'compatible' property in the root device tree node, and comparing it with the -dt_compat list in struct machine_desc. +dt_compat list in struct machine_desc (which is defined in +arch/arm/include/asm/mach/arch.h if you're curious). The 'compatible' property contains a sorted list of strings starting with the exact name of the machine, followed by an optional list of boards it is compatible with sorted from most compatible to least. For example, the root compatible properties for the TI BeagleBoard and its -successor, the BeagleBoard xM board might look like: +successor, the BeagleBoard xM board might look like, respectively: compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3"; compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3"; @@ -161,7 +162,7 @@ cases. Instead, the compatible list allows a generic machine_desc to provide support for a wide common set of boards by specifying "less -compatible" value in the dt_compat list. In the example above, +compatible" values in the dt_compat list. In the example above, generic board support can claim compatibility with "ti,omap3" or "ti,omap3450". If a bug was discovered on the original beagleboard that required special workaround code during early boot, then a new @@ -377,7 +378,7 @@ platform_devices as more platform_devices is a common pattern, and the device tree support code reflects that and makes the above example simpler. The second argument to of_platform_populate() is an of_device_id table, and any node that matches an entry in that table -will also get its child nodes registered. In the tegra case, the code +will also get its child nodes registered. In the Tegra case, the code can look something like this: static void __init harmony_init_machine(void) |