diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
11 files changed, 90 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index d2dce238ff5d..3e996346b264 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -54,11 +54,10 @@ unevaluatedProperties: false examples: - | - mlahb: ahb@38000000 { + ahb { compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x10000000 0x40000>; ranges; dma-ranges = <0x00000000 0x38000000 0x10000>, <0x10000000 0x10000000 0x60000>, diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index c6d0d8d81ed4..c2a158b75e49 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -57,17 +57,17 @@ properties: - const: allwinner,sun8i-v3s - description: Anbernic RG35XX (2024) - - items: + items: - const: anbernic,rg35xx-2024 - const: allwinner,sun50i-h700 - description: Anbernic RG35XX Plus - - items: + items: - const: anbernic,rg35xx-plus - const: allwinner,sun50i-h700 - description: Anbernic RG35XX H - - items: + items: - const: anbernic,rg35xx-h - const: allwinner,sun50i-h700 diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml index acfb4b2ee7a9..d54140f18d34 100644 --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml @@ -59,8 +59,8 @@ properties: - 3 dma-channels: - minItems: 1 - maxItems: 64 + minimum: 1 + maximum: 64 clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml index b1c13bab2472..b2d19cfb87ad 100644 --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -77,7 +77,7 @@ required: - clocks allOf: - - $ref: i2c-controller.yaml + - $ref: /schemas/i2c/i2c-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml index ab151c9db219..580003cdfff5 100644 --- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml +++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml @@ -21,7 +21,7 @@ description: | google,cros-ec-spi or google,cros-ec-i2c. allOf: - - $ref: i2c-controller.yaml# + - $ref: /schemas/i2c/i2c-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 96340a05754c..8265d709094d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -139,7 +139,7 @@ allOf: Voltage output range of the channel as <minimum, maximum> Required connections: Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V; - Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V; + Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V; oneOf: - items: - const: 0 diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index dc4ac41f2441..a62916d07a08 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -18,9 +18,12 @@ allOf: properties: compatible: - enum: - - elan,ekth6915 - - ilitek,ili2901 + oneOf: + - items: + - enum: + - elan,ekth5015m + - const: elan,ekth6915 + - const: elan,ekth6915 reg: const: 0x10 @@ -33,6 +36,12 @@ properties: reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. + no-reset-on-power-off: + type: boolean + description: + Reset line is wired so that it can (and should) be left deasserted when + the power supply is off. + vcc33-supply: description: The 3.3V supply to the touchscreen. @@ -58,8 +67,8 @@ examples: #address-cells = <1>; #size-cells = <0>; - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; + touchscreen@10 { + compatible = "elan,ekth5015m", "elan,ekth6915"; reg = <0x10>; interrupt-parent = <&tlmm>; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml new file mode 100644 index 000000000000..1abeec768d79 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI2901 touchscreen controller + +maintainers: + - Jiri Kosina <jkosina@suse.com> + +description: + Supports the Ilitek ILI2901 touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + enum: + - ilitek,ili2901 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + + vcc33-supply: true + + vccio-supply: true + +required: + - compatible + - reg + - interrupts + - vcc33-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2901"; + reg = <0x41>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_ts>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml index c80c880a9dab..60aaf30d68ed 100644 --- a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml @@ -128,7 +128,6 @@ required: - cell-index - reg - fsl,fman-ports - - ptp-timer dependencies: pcs-handle-names: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 50846a2d09c8..0bf2d9f093b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -29,7 +29,6 @@ properties: - qcom,pm7325-gpio - qcom,pm7550ba-gpio - qcom,pm8005-gpio - - qcom,pm8008-gpio - qcom,pm8018-gpio - qcom,pm8019-gpio - qcom,pm8038-gpio @@ -126,7 +125,6 @@ allOf: compatible: contains: enum: - - qcom,pm8008-gpio - qcom,pmi8950-gpio - qcom,pmr735d-gpio then: @@ -448,7 +446,6 @@ $defs: - gpio1-gpio10 for pm7325 - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 - gpio1-gpio12 for pm8038 - gpio1-gpio40 for pm8058 diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index 0874fc21f66f..6577a61cc075 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -65,6 +65,7 @@ patternProperties: description: The hard wired USB devices type: object $ref: /schemas/usb/usb-device.yaml + additionalProperties: true required: - peer-hub |