diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
9 files changed, 419 insertions, 118 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index eb39f5051159..e8abbdad7b5d 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -38,7 +38,7 @@ Bank: 3 (A, B and C) 0xffffffff 0x7fff3ccf /* pioB */ 0xffffffff 0x007fffff /* pioC */ -For each peripheral/bank we will descibe in a u32 if a pin can be +For each peripheral/bank we will describe in a u32 if a pin can be configured in it by putting 1 to the pin bit (1 << pin) Let's take the pioA on peripheral B diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt deleted file mode 100644 index e4e01c05cf83..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Freescale IMX8MM IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory -for common binding part and usage. - -Required properties: -- compatible: "fsl,imx8mm-iomuxc" -- reg: should contain the base physical address and size of the iomuxc - registers. - -Required properties in sub-nodes: -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini - Reference Manual for detailed CONFIG settings. - -Examples: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mm-iomuxc"; - reg = <0x0 0x30330000 0x0 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml new file mode 100644 index 000000000000..d98a3866add8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8MM IOMUX Controller + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8mm-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart2: uart2grp { + fsl,pins = + <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>, + <0x240 0x4A8 0x000 0x0 0x0 0x140>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt deleted file mode 100644 index 330716c971b9..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt +++ /dev/null @@ -1,39 +0,0 @@ -* Freescale IMX8MN IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory -for common binding part and usage. - -Required properties: -- compatible: "fsl,imx8mn-iomuxc" -- reg: should contain the base physical address and size of the iomuxc - registers. - -Required properties in sub-nodes: -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano - Reference Manual for detailed CONFIG settings. - -Examples: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mn-iomuxc"; - reg = <0x0 0x30330000 0x0 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 - MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 - MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml new file mode 100644 index 000000000000..b9aa180e07e4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8MN IOMUX Controller + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8mn-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8M Nano Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mn-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart2: uart2grp { + fsl,pins = + <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>, + <0x240 0x4A8 0x000 0x0 0x0 0x140>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml index 2e31e120395e..6297e78418cf 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml @@ -30,8 +30,6 @@ patternProperties: properties: fsl,pins: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg @@ -39,6 +37,22 @@ patternProperties: be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins @@ -59,10 +73,9 @@ examples: reg = <0x30330000 0x10000>; pinctrl_uart2: uart2grp { - fsl,pins = < - 0x228 0x488 0x5F0 0x0 0x6 0x49 - 0x228 0x488 0x000 0x0 0x0 0x49 - >; + fsl,pins = + <0x228 0x488 0x5F0 0x0 0x6 0x49>, + <0x228 0x488 0x000 0x0 0x0 0x49>; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt deleted file mode 100644 index 66de75090458..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Freescale IMX8MQ IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory -for common binding part and usage. - -Required properties: -- compatible: "fsl,imx8mq-iomuxc" -- reg: should contain the base physical address and size of the iomuxc - registers. - -Required properties in sub-nodes: -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad - Reference Manual for detailed CONFIG settings. - -Examples: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mq-iomuxc"; - reg = <0x0 0x30330000 0x0 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 - MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml new file mode 100644 index 000000000000..b30c704fcfa1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8MQ IOMUX Controller + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8mq-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8M Quad Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mq-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = + <0x234 0x49C 0x4F4 0x0 0x0 0x49>, + <0x238 0x4A0 0x4F4 0x0 0x0 0x49>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file mode 100644 index 000000000000..63d1cfe86c6e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block + +maintainers: + - Sricharan R <sricharan@codeaurora.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pinmux$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + allOf: + - $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 4 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + + serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + }; |