diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/usb-conn-gpio.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb-conn-gpio.txt | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt new file mode 100644 index 000000000000..3d05ae56cb0d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt @@ -0,0 +1,30 @@ +USB GPIO Based Connection Detection + +This is typically used to switch dual role mode from the USB ID pin connected +to an input GPIO, and also used to enable/disable device mode from the USB +Vbus pin connected to an input GPIO. + +Required properties: +- compatible : should include "gpio-usb-b-connector" and "usb-b-connector". +- id-gpios, vbus-gpios : input gpios, either one of them must be present, + and both can be present as well. + see connector/usb-connector.txt + +Optional properties: +- vbus-supply : can be present if needed when supports dual role mode. + see connector/usb-connector.txt + +- Sub-nodes: + - port : can be present. + see graph.txt + +Example: + +&mtu3 { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_p0_vbus>; + }; +}; |