1 files changed, 0 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.txt b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt
deleted file mode 100644
index e39255ea6e4f..000000000000
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Renesas Electronics USBHS driver
-
-Required properties:
-  - compatible: Must contain one or more of the following:
-
-	- "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
-	- "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
-	- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
-	- "renesas,usbhs-r8a77470" for r8a77470 (RZ/G1C) compatible device
-	- "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
-	- "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device
-	- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
-	- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
-	- "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
-	- "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device
-	- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
-	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
-	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
-	- "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
-	- "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device
-	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
-	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
-	- "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device
-	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
-	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices
-	- "renesas,rza1-usbhs" for RZ/A1 compatible device
-	- "renesas,rza2-usbhs" for RZ/A2 compatible device
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed
-	by the generic version.
-
-  - reg: Base address and length of the register for the USBHS
-  - interrupts: Interrupt specifier for the USBHS
-  - clocks: A list of phandle + clock specifier pairs.
-	    - In case of "renesas,rcar-gen3-usbhs", two clocks are required.
-	      First clock should be peripheral and second one should be host.
-	    - In case of except above, one clock is required. First clock
-	      should be peripheral.
-
-Optional properties:
-  - renesas,buswait: Integer to use BUSWAIT register
-  - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB
-			 function should be enabled
-  - phys: phandle + phy specifier pair
-  - phy-names: must be "usb"
-  - dmas: Must contain a list of references to DMA specifiers.
-  - dma-names : named "ch%d", where %d is the channel number ranging from zero
-                to the number of channels (DnFIFOs) minus one.
-
-Example:
-	usbhs: usb@e6590000 {
-		compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
-		reg = <0 0xe6590000 0 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
-	};