diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
19 files changed, 619 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml index 67405e6d8168..19f111f40225 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml @@ -12,7 +12,11 @@ maintainers: properties: "#sound-dai-cells": - const: 0 + minimum: 0 + maximum: 1 + description: + A value of 0 is deprecated. When used, it only allows access to + the ADC/DAC and AIF1 (the CPU DAI), not the other two AIFs/DAIs. compatible: oneOf: @@ -50,7 +54,7 @@ additionalProperties: false examples: - | audio-codec@1c22e00 { - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; compatible = "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x400>; interrupts = <0 29 4>; diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt index 7dfaa2ab906f..5d416fdaf023 100644 --- a/Documentation/devicetree/bindings/sound/cs42l42.txt +++ b/Documentation/devicetree/bindings/sound/cs42l42.txt @@ -81,6 +81,13 @@ Optional properties: < x1 x2 x3 x4 > Default = < 15 8 4 1> + - cirrus,hs-bias-sense-disable: This is boolean property. If present the + HSBIAS sense is disabled. Configures HSBIAS output current sense through + the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce + the potential pop noise during the headset plug out slowly. But on some + platforms ESD voltage will affect it causing test to fail, especially + with CTIA headset type. For different hardware setups, a designer might + want to tweak default behavior. Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 4454aca34d56..f226ec13167a 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -25,6 +25,7 @@ properties: - fsl,imx8mq-spdif - fsl,imx8mm-spdif - fsl,imx8mn-spdif + - fsl,imx8ulp-spdif reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 0dc83cc4a236..c71c5861d787 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -9,8 +9,10 @@ Required properties: - compatible : Compatible list, contains "fsl,vf610-sai", "fsl,imx6sx-sai", "fsl,imx6ul-sai", - "fsl,imx7ulp-sai", "fsl,imx8mq-sai" or - "fsl,imx8qm-sai". + "fsl,imx7ulp-sai", "fsl,imx8mq-sai", + "fsl,imx8qm-sai", "fsl,imx8mm-sai", + "fsl,imx8mn-sai", "fsl,imx8mp-sai", or + "fsl,imx8ulp-sai". - reg : Offset and length of the register set for the device. diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml new file mode 100644 index 000000000000..d1816dd061cf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audio-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX audio sound card. + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + enum: + - fsl,imx-audio-card + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. Valid names could be power supplies, + MicBias of codec and the jacks on the board. + +patternProperties: + ".*-dai-link$": + description: + Each subnode represents a dai link. Subnodes of each dai links would be + cpu/codec dais. + + type: object + + properties: + link-name: + description: Indicates dai-link name and PCM stream name. + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + format: + description: audio format. + items: + enum: + - i2s + - dsp_b + + dai-tdm-slot-num: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + dai-tdm-slot-width: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + properties: + sound-dai: true + + codec: + description: Holds subnode which indicates codec dai. + type: object + properties: + sound-dai: true + + fsl,mclk-equal-bclk: + description: Indicates mclk can be equal to bclk, especially for sai interface + $ref: /schemas/types.yaml#/definitions/flag + + required: + - link-name + - cpu + + additionalProperties: false + +required: + - compatible + - model + +additionalProperties: false + +examples: + - | + sound-ak4458 { + compatible = "fsl,imx-audio-card"; + model = "ak4458-audio"; + pri-dai-link { + link-name = "akcodec"; + format = "i2s"; + fsl,mclk-equal-bclk; + cpu { + sound-dai = <&sai1>; + }; + codec { + sound-dai = <&ak4458_1>, <&ak4458_2>; + }; + }; + fe-dai-link { + link-name = "HiFi-ASRC-FE"; + format = "i2s"; + cpu { + sound-dai = <&easrc>; + }; + }; + be-dai-link { + link-name = "HiFi-ASRC-BE"; + format = "dsp_b"; + dai-tdm-slot-num = <8>; + dai-tdm-slot-width = <32>; + fsl,mclk-equal-bclk; + cpu { + sound-dai = <&sai1>; + }; + codec { + sound-dai = <&ak4458_1>, <&ak4458_2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt deleted file mode 100644 index 2db4dcbee1b9..000000000000 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ /dev/null @@ -1,28 +0,0 @@ -Freescale Digital Audio Mux (AUDMUX) device - -Required properties: - - - compatible : "fsl,imx21-audmux" for AUDMUX version firstly used - on i.MX21, or "fsl,imx31-audmux" for the version - firstly used on i.MX31. - - - reg : Should contain AUDMUX registers location and length. - -An initial configuration can be setup using child nodes. - -Required properties of optional child nodes: - - - fsl,audmux-port : Integer of the audmux port that is configured by this - child node. - - - fsl,port-config : List of configuration options for the specific port. - For imx31-audmux and above, it is a list of tuples - <ptcr pdcr>. For imx21-audmux it is a list of pcr - values. - -Example: - -audmux@21d8000 { - compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; - reg = <0x021d8000 0x4000>; -}; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.yaml b/Documentation/devicetree/bindings/sound/imx-audmux.yaml new file mode 100644 index 000000000000..dab45c310670 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audmux.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Digital Audio Mux device + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx27-audmux + - const: fsl,imx21-audmux + - items: + - enum: + - fsl,imx25-audmux + - fsl,imx35-audmux + - fsl,imx50-audmux + - fsl,imx51-audmux + - fsl,imx53-audmux + - fsl,imx6q-audmux + - fsl,imx6sl-audmux + - fsl,imx6sll-audmux + - fsl,imx6sx-audmux + - const: fsl,imx31-audmux + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: audmux + +patternProperties: + "^mux-[0-9a-z]*$": + type: object + properties: + fsl,audmux-port: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Integer of the audmux port that is configured by this child node + + fsl,port-config: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + List of configuration options for the specific port. + For imx31-audmux and above, it is a list of tuples ptcr pdcr. + For imx21-audmux it is a list of pcr values. + + required: + - fsl,audmux-port + - fsl,port-config + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + audmux@21d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + }; + - | + audmux@10016000 { + compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; + reg = <0x10016000 0x1000>; + clocks = <&clks 1>; + clock-names = "audmux"; + + mux-ssi0 { + fsl,audmux-port = <0>; + fsl,port-config = <0xcb205000>; + }; + + mux-pins4 { + fsl,audmux-port = <2>; + fsl,port-config = <0x00001000>; + }; + }; + - | + #include <dt-bindings/sound/fsl-imx-audmux.h> + audmux@21d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml index 249970952202..5bdd30a8a404 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml @@ -28,7 +28,6 @@ properties: minItems: 2 clock-names: - minItems: 2 items: - const: pll_a - const: plla_out0 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 38e52e7dbb40..63370709c768 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -34,7 +34,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: I2S bit clock - description: @@ -48,7 +47,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: i2s - const: sync_input diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml new file mode 100644 index 000000000000..ffb8fcfeb629 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nxp,tfa989x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +properties: + compatible: + enum: + - nxp,tfa9895 + - nxp,tfa9897 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: + Used as prefix for sink/source names of the component. Must be a + unique string among multiple instances of the same component. + + vddd-supply: + description: regulator phandle for the VDDD power supply. + +required: + - compatible + - reg + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + sound-name-prefix = "Speaker Left"; + #sound-dai-cells = <0>; + }; + audio-codec@36 { + compatible = "nxp,tfa9895"; + reg = <0x36>; + sound-name-prefix = "Speaker Right"; + #sound-dai-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index e8f716b5f875..9b225dbf8b79 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -77,6 +77,31 @@ properties: minimum: 1800000 maximum: 2850000 + qcom,hphl-jack-type-normally-closed: + description: Indicates that HPHL jack switch type is normally closed + type: boolean + + qcom,ground-jack-type-normally-closed: + description: Indicates that Headset Ground switch type is normally closed + type: boolean + + qcom,mbhc-headset-vthreshold-microvolt: + description: Voltage threshold value for headset detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-headphone-vthreshold-microvolt: + description: Voltage threshold value for headphone detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-buttons-vthreshold-microvolt: + description: + Array of 8 Voltage threshold values corresponding to headset + button0 - button7 + minItems: 8 + maxItems: 8 + clock-output-names: const: mclk @@ -159,6 +184,11 @@ examples: qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; + qcom,hphl-jack-type-normally-closed; + qcom,ground-jack-type-normally-closed; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; clock-names = "extclk"; clocks = <&rpmhcc 2>; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml new file mode 100644 index 000000000000..49a267b306f6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385 + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. This bindings is for the + slave devices. + +properties: + compatible: + const: sdw20217010d00 + + reg: + maxItems: 1 + + qcom,tx-port-mapping: + description: | + Specifies static port mapping between slave and master tx ports. + In the order of slave port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + + qcom,rx-port-mapping: + description: | + Specifies static port mapping between slave and master rx ports. + In the order of slave port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + maxItems: 5 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd938x_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml new file mode 100644 index 000000000000..cb74ce40c2e6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. + +properties: + compatible: + enum: + - qcom,wcd9380-codec + - qcom,wcd9385-codec + + reset-gpios: + description: GPIO spec for reset line to use + maxItems: 1 + + vdd-buck-supply: + description: A reference to the 1.8V buck supply + + vdd-rxtx-supply: + description: A reference to the 1.8V rx supply + + vdd-io-supply: + description: A reference to the 1.8V I/O supply + + qcom,tx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire tx device phandle + + qcom,rx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire rx device phandle + + qcom,micbias1-microvolt: + description: micbias1 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias2-microvolt: + description: micbias2 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias3-microvolt: + description: micbias3 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias4-microvolt: + description: micbias4 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,hphl-jack-type-normally-closed: + description: Indicates that HPHL jack switch type is normally closed + type: boolean + + qcom,ground-jack-type-normally-closed: + description: Indicates that Headset Ground switch type is normally closed + type: boolean + + qcom,mbhc-headset-vthreshold-microvolt: + description: Voltage threshold value for headset detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-headphone-vthreshold-microvolt: + description: Voltage threshold value for headphone detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-buttons-vthreshold-microvolt: + description: + Array of 8 Voltage threshold values corresponding to headset + button0 - button7 + minItems: 8 + maxItems: 8 + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reset-gpios + - qcom,tx-device + - qcom,rx-device + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - qcom,micbias4-microvolt + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + codec { + compatible = "qcom,wcd9380-codec"; + reset-gpios = <&tlmm 32 0>; + #sound-dai-cells = <1>; + qcom,tx-device = <&wcd938x_tx>; + qcom,rx-device = <&wcd938x_rx>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,hphl-jack-type-normally-closed; + qcom,ground-jack-type-normally-closed; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + }; + + /* ... */ + + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd938x_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 605de3a5847f..ee936d1aa724 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -86,9 +86,11 @@ properties: power-domains: true resets: + minItems: 1 maxItems: 11 reset-names: + minItems: 1 maxItems: 11 clocks: @@ -110,6 +112,13 @@ properties: - pattern: '^dvc\.[0-1]$' - pattern: '^clk_(a|b|c|i)$' + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port(@[0-9a-f]+)?: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + port: $ref: audio-graph-port.yaml# unevaluatedProperties: false @@ -257,7 +266,6 @@ required: - "#sound-dai-cells" allOf: - - $ref: audio-graph.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index 70b4a8831073..e762c320b574 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -75,6 +75,10 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 0, 1, 2, 3 ] + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index f2443b651282..06e83461705c 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -26,7 +26,6 @@ properties: - description: Base address and size of SAI common register set. - description: Base address and size of SAI identification register set. minItems: 1 - maxItems: 2 ranges: maxItems: 1 @@ -81,14 +80,12 @@ patternProperties: - description: sai_ck clock feeding the internal clock generator. - description: MCLK clock from a SAI set as master clock provider. minItems: 1 - maxItems: 2 clock-names: items: - const: sai_ck - const: MCLK minItems: 1 - maxItems: 2 dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index ca75890f0d07..f59125bc79d1 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -6,6 +6,7 @@ Required properties: - compatible - "string" - One of: "ti,tlv320aic32x4" TLV320AIC3204 "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 + "ti,tas2505" TAS2505, TAS2521 - reg: I2C slave address - supply-*: Required supply regulators are: "iov" - digital IO power supply diff --git a/Documentation/devicetree/bindings/sound/wm8750.txt b/Documentation/devicetree/bindings/sound/wm8750.txt deleted file mode 100644 index 682f221f6f38..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8750.txt +++ /dev/null @@ -1,18 +0,0 @@ -WM8750 and WM8987 audio CODECs - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8750" or "wlf,wm8987" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8750: codec@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wm8750.yaml new file mode 100644 index 000000000000..24246ac7bbdf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8750.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wm8750.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8750 and WM8987 audio CODECs + +description: | + These devices support both I2C and SPI (configured with pin strapping + on the board). + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + compatible: + enum: + - wlf,wm8750 + - wlf,wm8987 + + reg: + description: + The I2C address of the device for I2C, the chip select number for SPI + maxItems: 1 + +additionalProperties: false + +required: + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8750"; + reg = <0x1a>; + }; + }; |