1 files changed, 0 insertions, 38 deletions
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
deleted file mode 100644
index a8690bfa5e1f..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-STMicroelectronics STM32 Timers PWM bindings
-
-Must be a sub-node of an STM32 Timers device tree node.
-See ../mfd/stm32-timers.txt for details about the parent node.
-
-Required parameters:
-- compatible:		Must be "st,stm32-pwm".
-- pinctrl-names: 	Set to "default".
-- pinctrl-0: 		List of phandles pointing to pin configuration nodes for PWM module.
-			For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
-- #pwm-cells:		Should be set to 3. This PWM chip uses the default 3 cells
-			bindings defined in pwm.txt.
-
-Optional parameters:
-- st,breakinput:	One or two <index level filter> to describe break input configurations.
-			"index" indicates on which break input (0 or 1) the configuration
-			should be applied.
-			"level" gives the active level (0=low or 1=high) of the input signal
-			for this configuration.
-			"filter" gives the filtering value to be applied.
-
-Example:
-	timers@40010000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "st,stm32-timers";
-		reg = <0x40010000 0x400>;
-		clocks = <&rcc 0 160>;
-		clock-names = "int";
-
-		pwm {
-			compatible = "st,stm32-pwm";
-			#pwm-cells = <3>;
-			pinctrl-0	= <&pwm1_pins>;
-			pinctrl-names	= "default";
-			st,breakinput = <0 1 5>;
-		};
-	};