diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt index 71f2840e8209..40811ff8de10 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt @@ -1,14 +1,16 @@ -ltc3651-charger +Analog Devices LT3651 Charger Power Supply bindings: lt3651-charger Required properties: - - compatible: "lltc,ltc3651-charger" +- compatible: Should contain one of the following: + * "lltc,ltc3651-charger", (DEPRECATED: Use "lltc,lt3651-charger") + * "lltc,lt3651-charger" - lltc,acpr-gpios: Connect to ACPR output. See remark below. Optional properties: - lltc,fault-gpios: Connect to FAULT output. See remark below. - lltc,chrg-gpios: Connect to CHRG output. See remark below. -The ltc3651 outputs are open-drain type and active low. The driver assumes the +The lt3651 outputs are open-drain type and active low. The driver assumes the GPIO reports "active" when the output is asserted, so if the pins have been connected directly, the GPIO flags should be set to active low also. @@ -20,7 +22,7 @@ attributes to detect changes. Example: charger: battery-charger { - compatible = "lltc,ltc3651-charger"; + compatible = "lltc,lt3651-charger"; lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; |