diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml | 195 |
1 files changed, 0 insertions, 195 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml deleted file mode 100644 index 58dd34f4fcb5..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml +++ /dev/null @@ -1,195 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. SDX65 TLMM block - -maintainers: - - Vamsi krishna Lanka <quic_vamslank@quicinc.com> - -description: - This binding describes the Top Level Mode Multiplexer block found in the - SDX65 platform. - -properties: - compatible: - const: qcom,sdx65-tlmm - - reg: - description: Specifies the base address and size of the TLMM register space - maxItems: 1 - - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - - interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - - gpio-reserved-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '$-state': - oneOf: - - $ref: "#/$defs/qcom-sdx65-tlmm-state" - - patternProperties: - ".*": - $ref: "#/$defs/qcom-sdx65-tlmm-state" -'$defs': - qcom-sdx65-tlmm-state: - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9])$" - - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ] - minItems: 1 - maxItems: 150 - - function: - description: - Specify the alternative function to be configured for the specified - pins. Functions are only valid for gpio pins. - enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, - bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, - qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, - dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, - blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, - mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, - atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, - cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, - pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, - qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, - qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, - atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, - atest_usb20, atest_char0, dac_calib10, qdss_stm10, - qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, - blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, - qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, - qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, - dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, - qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, - dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, - dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, - dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, - sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, - qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, - uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, - blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, - qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, - blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, - cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, - blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, - qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, - isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, - qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, - sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, - gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, - qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, - tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, - qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, - sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, - sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, - ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, - blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, - pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, - qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, - qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, - gpio ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false - -required: - - compatible - - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@f100000 { - compatible = "qcom,sdx65-tlmm"; - reg = <0x03000000 0xdc2000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 109>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <2>; - bias-disable; - }; - - uart-w-subnodes-state { - rx { - pins = "gpio4"; - function = "blsp_uart1"; - bias-pull-up; - }; - - tx { - pins = "gpio5"; - function = "blsp_uart1"; - bias-disable; - }; - }; - }; -... |