diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy')
12 files changed, 315 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt new file mode 100644 index 000000000000..4ba298966af9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt @@ -0,0 +1,32 @@ +Broadcom Stingray USB PHY + +Required properties: + - compatible : should be one of the listed compatibles + - "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS. + - "brcm,sr-usb-hs-phy" is a single HS PHY. + - reg: offset and length of the PHY blocks registers + - #phy-cells: + - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate + the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY. + - Must be 0 for brcm,sr-usb-hs-phy. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usbphy0: usb-phy@0 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00000000 0x100>; + #phy-cells = <1>; + }; + + usbphy1: usb-phy@10000 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00010000 0x100>, + #phy-cells = <1>; + }; + + usbphy2: usb-phy@20000 { + compatible = "brcm,sr-usb-hs-phy"; + reg = <0x00020000 0x100>, + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt index a22e853d710c..ed47e5cd067e 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -7,6 +7,9 @@ Required properties: - clocks: phandles to the clocks for each clock listed in clock-names - clock-names: must contain "phy" +Optional properties: +- vbus-supply: A phandle to the regulator for USB VBUS. + Example: usb3_phy0: phy@381f0040 { compatible = "fsl,imx8mq-usb-phy"; diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt new file mode 100644 index 000000000000..a6ebc3dea159 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt @@ -0,0 +1,22 @@ +* Amlogic G12A USB2 PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-g12a-usb2-phy" +- reg: The base address and length of the registers +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- clocks: a phandle to the clock of this PHY +- clock-names: must be "xtal" +- resets: a phandle to the reset line of this PHY +- reset-names: must be "phy" +- phy-supply: see phy-bindings.txt in this directory + +Example: + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt new file mode 100644 index 000000000000..7cfc17e2df31 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt @@ -0,0 +1,22 @@ +* Amlogic G12A USB3 + PCIE Combo PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy" +- #phys-cells: must be 1. The cell number is used to select the phy mode + as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE +- reg: The base address and length of the registers +- clocks: a phandle to the 100MHz reference clock of this PHY +- clock-names: must be "ref_clk" +- resets: phandle to the reset lines for the PHY control +- reset-names: must be "phy" + +Example: + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 3742c152c467..daedb15f322e 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -36,11 +36,20 @@ Required properties: - Tegra124: "nvidia,tegra124-xusb-padctl" - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - Tegra210: "nvidia,tegra210-xusb-padctl" + - Tegra186: "nvidia,tegra186-xusb-padctl" - reg: Physical base address and length of the controller's registers. - resets: Must contain an entry for each entry in reset-names. - reset-names: Must include the following entries: - "padctl" +For Tegra186: +- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply + 3.3 V. +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. +- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. + Pad nodes: ========== diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt new file mode 100644 index 000000000000..e88ba7d92dcb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt @@ -0,0 +1,26 @@ +Hisilicon hi3660 USB PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hi3660-usb-phy" +- #phy-cells: must be 0 +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. +- hisilicon,eye-diagram-param: parameter set for phy +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +This is a subnode of usb3_otg_bc register node. + +Example: + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt new file mode 100644 index 000000000000..5789029a1d42 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt @@ -0,0 +1,38 @@ +MediaTek Universal Flash Storage (UFS) M-PHY binding +-------------------------------------------------------- + +UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro. +Each UFS M-PHY node should have its own node. + +To bind UFS M-PHY with UFS host controller, the controller node should +contain a phandle reference to UFS M-PHY node. + +Required properties for UFS M-PHY nodes: +- compatible : Compatible list, contains the following controller: + "mediatek,mt8183-ufsphy" for ufs phy + persent on MT81xx chipsets. +- reg : Address and length of the UFS M-PHY register set. +- #phy-cells : This property shall be set to 0. +- clocks : List of phandle and clock specifier pairs. +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. Following clocks are + mandatory. + "unipro": Unipro core control clock. + "mp": M-PHY core control clock. + +Example: + + ufsphy: phy@11fa0000 { + compatible = "mediatek,mt8183-ufsphy"; + reg = <0 0x11fa0000 0 0xc000>; + #phy-cells = <0>; + + clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>, + <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>; + clock-names = "unipro", "mp"; + }; + + ufshci@11270000 { + ... + phys = <&ufsphy>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index 5d181fc3cc18..085fbd676cfc 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -11,6 +11,7 @@ Required properties: "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, + "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998, "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845. @@ -48,6 +49,8 @@ Required properties: "aux", "cfg_ahb", "ref". For "qcom,msm8998-qmp-ufs-phy" must contain: "ref", "ref_aux". + For "qcom,msm8998-qmp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref". For "qcom,sdm845-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: @@ -59,7 +62,8 @@ Required properties: one for each entry in reset-names. - reset-names: "phy" for reset of phy block, "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset. + "cfg" for phy's ahb cfg block reset, + "ufsphy" for the PHY reset in the UFS controller. For "qcom,ipq8074-qmp-pcie-phy" must contain: "phy", "common". @@ -69,12 +73,16 @@ Required properties: "phy", "common". For "qcom,msm8998-qmp-usb3-phy" must contain "phy", "common". - For "qcom,msm8998-qmp-ufs-phy": no resets are listed. + For "qcom,msm8998-qmp-ufs-phy": must contain: + "ufsphy". + For "qcom,msm8998-qmp-pcie-phy" must contain: + "phy", "common". For "qcom,sdm845-qmp-usb3-phy" must contain: "phy", "common". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: "phy", "common". - For "qcom,sdm845-qmp-ufs-phy": no resets are listed. + For "qcom,sdm845-qmp-ufs-phy": must contain: + "ufsphy". - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 4f0879a0ca12..ac96d6481bb8 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -7,6 +7,7 @@ Required properties: - compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC. "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. + "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC. "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. @@ -30,7 +31,7 @@ channels. These subnodes must contain the following properties: - #phy-cells: see phy-bindings.txt in the same directory, must be <1>. The phandle's argument in the PHY specifier is the USB controller selector for -the USB channel; see the selector meanings below: +the USB channel other than r8a77470 SoC; see the selector meanings below: +-----------+---------------+---------------+ |\ Selector | | | @@ -41,6 +42,16 @@ the USB channel; see the selector meanings below: | 2 | PCI EHCI/OHCI | xHCI | +-----------+---------------+---------------+ +For r8a77470 SoC;see the selector meaning below: + ++-----------+---------------+---------------+ +|\ Selector | | | ++ --------- + 0 | 1 | +| Channel \| | | ++-----------+---------------+---------------+ +| 0 | EHCI/OHCI | HS-USB | ++-----------+---------------+---------------+ + Example (Lager board): usb-phy@e6590100 { @@ -48,15 +59,53 @@ Example (Lager board): reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; - usb-channel@0 { + usb0: usb-channel@0 { reg = <0>; #phy-cells = <1>; }; - usb-channel@2 { + usb2: usb-channel@2 { reg = <2>; #phy-cells = <1>; }; }; + +Example (iWave RZ/G1C sbc): + + usbphy0: usb-phy0@e6590100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 704>; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; + + usbphy1: usb-phy@e6598100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6598100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 706>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 706>; + + usb1: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index ad9c290d8f15..d46188f450bf 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -1,10 +1,12 @@ * Renesas R-Car generation 3 USB 2.0 PHY This file provides information on what the device node for the R-Car generation -3 and RZ/G2 USB 2.0 PHY contain. +3, RZ/G1C and RZ/G2 USB 2.0 PHY contain. Required properties: -- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 +- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 + SoC. + "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 SoC. "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0 SoC. @@ -27,7 +29,13 @@ Required properties: - reg: offset and length of the partial USB 2.0 Host register block. - clocks: clock phandle and specifier pair(s). -- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. +- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and + using <0> is deprecated). + +The phandle's argument in the PHY specifier is the INT_STATUS bit of controller: +- 1 = USBH_INTA (OHCI) +- 2 = USBH_INTB (EHCI) +- 3 = UCOM_INT (OTG and BC) Optional properties: To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index e3ea55763b0a..e728786f21e0 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -7,12 +7,15 @@ Required properties: - reg: PHY register address offset and length in "general register files" -Optional clocks using the clock bindings (see ../clock/clock-bindings.txt), -specified by name: +Optional properties: - clock-names: Should contain "emmcclk". Although this is listed as optional (because most boards can get basic functionality without having access to it), it is strongly suggested. + See ../clock/clock-bindings.txt for details. - clocks: Should have a phandle to the card clock exported by the SDHCI driver. + - drive-impedance-ohm: Specifies the drive impedance in Ohm. + Possible values are 33, 40, 50, 66 and 100. + If not set, the default value of 50 will be applied. Example: @@ -29,6 +32,7 @@ grf: syscon@ff770000 { reg = <0xf780 0x20>; clocks = <&sdhci>; clock-names = "emmcclk"; + drive-impedance-ohm = <50>; #phy-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt new file mode 100644 index 000000000000..64b286d2d398 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt @@ -0,0 +1,82 @@ +TI AM654 SERDES + +Required properties: + - compatible: Should be "ti,phy-am654-serdes" + - reg : Address and length of the register set for the device. + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. Should be "2". The 1st cell + corresponds to the phy type (should be one of the types specified in + include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes + lane function. + If SERDES0 is referenced 2nd cell should be: + 0 - USB3 + 1 - PCIe0 Lane0 + 2 - ICSS2 SGMII Lane0 + If SERDES1 is referenced 2nd cell should be: + 0 - PCIe1 Lane0 + 1 - PCIe0 Lane1 + 2 - ICSS2 SGMII Lane1 + - power-domains: As documented by the generic PM domain bindings in + Documentation/devicetree/bindings/power/power_domain.txt. + - clocks: List of clock-specifiers representing the input to the SERDES. + Should have 3 items representing the left input clock, external + reference clock and right input clock in that order. + - clock-output-names: List of clock names for each of the clock outputs of + SERDES. Should have 3 items for CMU reference clock, + left output clock and right output clock in that order. + - assigned-clocks: As defined in + Documentation/devicetree/bindings/clock/clock-bindings.txt + - assigned-clock-parents: As defined in + Documentation/devicetree/bindings/clock/clock-bindings.txt + - #clock-cells: Should be <1> to choose between the 3 output clocks. + Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt + + The following macros are defined in dt-bindings/phy/phy-am654-serdes.h + for selecting the correct reference clock. This can be used while + specifying the clocks created by SERDES. + => AM654_SERDES_CMU_REFCLK + => AM654_SERDES_LO_REFCLK + => AM654_SERDES_RO_REFCLK + + - mux-controls: Phandle to the multiplexer that is used to select the lane + function. See #phy-cells above to see the multiplex values. + +Example: + +Example for SERDES0 is given below. It has 3 clock inputs; +left input reference clock as indicated by <&k3_clks 153 4>, external +reference clock as indicated by <&k3_clks 153 1> and right input +reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The +right input of SERDES0 is connected to the left output of SERDES1). + +SERDES0 registers 3 clock outputs as indicated in clock-output-names. The +first refers to the CMU reference clock, second refers to the left output +reference clock and the third refers to the right output reference clock. + +The assigned-clocks and assigned-clock-parents is used here to set the +parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of +CMU reference clock to left input reference clock. + +serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x900000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, + <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", + "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + mux-controls = <&serdes_mux 0>; + #clock-cells = <1>; +}; + +Example for PCIe consumer node using the SERDES PHY specifier is given below. +&pcie0_rc { + num-lanes = <2>; + phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0", "pcie-phy1"; +}; |