diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml | 175 |
1 files changed, 175 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml new file mode 100644 index 000000000000..9911ada39ee7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/realtek,usb2phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC SoCs USB 2.0 PHY + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: | + Realtek USB 2.0 PHY support the digital home center (DHC) RTD series SoCs. + The USB 2.0 PHY driver is designed to support the XHCI controller. The SoCs + support multiple XHCI controllers. One PHY device node maps to one XHCI + controller. + + RTD1295/RTD1619 SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some + controllers. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1395 SoCs USB + The USB architecture includes two XHCI controllers. + The controller#0 has one USB 2.0 PHY. The controller#1 includes two USB 2.0 + PHY. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + |- phy#1 + + RTD1319/RTD1619b SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319d SoCs USB + The USB architecture includes three XHCI controllers. + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + + RTD1312c/RTD1315e SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + +properties: + compatible: + enum: + - realtek,rtd1295-usb2phy + - realtek,rtd1312c-usb2phy + - realtek,rtd1315e-usb2phy + - realtek,rtd1319-usb2phy + - realtek,rtd1319d-usb2phy + - realtek,rtd1395-usb2phy + - realtek,rtd1395-usb2phy-2port + - realtek,rtd1619-usb2phy + - realtek,rtd1619b-usb2phy + + reg: + items: + - description: PHY data registers + - description: PHY control registers + + "#phy-cells": + const: 0 + + nvmem-cells: + maxItems: 2 + description: + Phandles to nvmem cell that contains the trimming data. + If unspecified, default value is used. + + nvmem-cell-names: + items: + - const: usb-dc-cal + - const: usb-dc-dis + description: + The following names, which correspond to each nvmem-cells. + usb-dc-cal is the driving level for each phy specified via efuse. + usb-dc-dis is the disconnection level for each phy specified via efuse. + + realtek,inverse-hstx-sync-clock: + description: + For one of the phys of RTD1619b SoC, the synchronous clock of the + high-speed tx must be inverted. + type: boolean + + realtek,driving-level: + description: + Control the magnitude of High speed Dp/Dm output swing (mV). + For a different board or port, the original magnitude maybe not meet + the specification. In this situation we can adjust the value to meet + the specification. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + minimum: 0 + maximum: 31 + + realtek,driving-level-compensate: + description: + For RTD1315e SoC, the driving level can be adjusted by reading the + efuse table. This property provides drive compensation. + If the magnitude of High speed Dp/Dm output swing still not meet the + specification, then we can set this value to meet the specification. + $ref: /schemas/types.yaml#/definitions/int32 + default: 0 + minimum: -8 + maximum: 8 + + realtek,disconnection-compensate: + description: + This adjusts the disconnection level compensation for the different + boards with different disconnection level. + $ref: /schemas/types.yaml#/definitions/int32 + default: 0 + minimum: -8 + maximum: 8 + +required: + - compatible + - reg + - "#phy-cells" + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - realtek,rtd1619b-usb2phy + then: + properties: + realtek,inverse-hstx-sync-clock: false + + - if: + not: + properties: + compatible: + contains: + enum: + - realtek,rtd1315e-usb2phy + then: + properties: + realtek,driving-level-compensate: false + +additionalProperties: false + +examples: + - | + usb-phy@13214 { + compatible = "realtek,rtd1619b-usb2phy"; + reg = <0x13214 0x4>, <0x28280 0x4>; + #phy-cells = <0>; + nvmem-cells = <&otp_usb_port0_dc_cal>, <&otp_usb_port0_dc_dis>; + nvmem-cell-names = "usb-dc-cal", "usb-dc-dis"; + + realtek,inverse-hstx-sync-clock; + realtek,driving-level = <0xa>; + realtek,disconnection-compensate = <(-1)>; + }; |