1 files changed, 0 insertions, 86 deletions
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
deleted file mode 100644
index 698aacbdcfc4..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Broadcom STB USB PHY
-
-Required properties:
-- compatible: should be one of
-	"brcm,brcmstb-usb-phy"
-	"brcm,bcm7216-usb-phy"
-	"brcm,bcm7211-usb-phy"
-
-- reg and reg-names properties requirements are specific to the
-  compatible string.
-  "brcm,brcmstb-usb-phy":
-    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
-           and an optional pair for systems with USB 3.x support
-    - reg-names: not specified
-  "brcm,bcm7216-usb-phy":
-    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
-           registers
-    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
-  "brcm,bcm7211-usb-phy":
-    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
-           USB_PHY and USB_MDIO registers and an optional pair
-	   for the BDC registers
-    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
-
-- #phy-cells: Shall be 1 as it expects one argument for setting
-	      the type of the PHY. Possible values are:
-	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-	      - PHY_TYPE_USB3 for USB3.x PHY
-
-Optional Properties:
-- clocks : clock phandles.
-- clock-names: String, clock name.
-- interrupts: wakeup interrupt
-- interrupt-names: "wakeup"
-- brcm,ipp: Boolean, Invert Port Power.
-  Possible values are: 0 (Don't invert), 1 (Invert)
-- brcm,ioc: Boolean, Invert Over Current detection.
-  Possible values are: 0 (Don't invert), 1 (Invert)
-- dr_mode: String, PHY Device mode.
-  Possible values are: "host", "peripheral ", "drd" or "typec-pd"
-  If this property is not defined, the phy will default to "host" mode.
-- brcm,syscon-piarbctl: phandle to syscon for handling config registers
-NOTE: one or both of the following two properties must be set
-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
-
-
-Example:
-
-usbphy_0: usb-phy@f0470200 {
-	reg = <0xf0470200 0xb8>,
-		<0xf0471940 0x6c0>;
-	compatible = "brcm,brcmstb-usb-phy";
-	#phy-cells = <1>;
-	dr_mode = "host"
-	brcm,ioc = <1>;
-	brcm,ipp = <1>;
-	brcm,has-xhci;
-	brcm,has-eohci;
-	clocks = <&usb20>, <&usb30>;
-	clock-names = "sw_usb", "sw_usb3";
-};
-
-usb-phy@29f0200 {
-	reg = <0x29f0200 0x200>,
-		<0x29c0880 0x30>,
-		<0x29cc100 0x534>,
-		<0x2808000 0x24>,
-		<0x2980080 0x8>;
-	reg-names = "ctrl",
-		"xhci_ec",
-		"xhci_gbl",
-		"usb_phy",
-		"usb_mdio";
-	brcm,ioc = <0x0>;
-	brcm,ipp = <0x0>;
-	compatible = "brcm,bcm7211-usb-phy";
-	interrupts = <0x30>;
-	interrupt-parent = <&vpu_intr1_nosec_intc>;
-	interrupt-names = "wake";
-	#phy-cells = <0x1>;
-	brcm,has-xhci;
-	syscon-piarbctl = <&syscon_piarbctl>;
-	clocks = <&scmi_clk 256>;
-	clock-names = "sw_usb";
-};