diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml new file mode 100644 index 000000000000..8eaa07ae9774 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 PCIe Root Port Controller + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + Embedded into Baikal-T1 SoC Root Complex controller with a single port + activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured + to have just a single Root Port function and is capable of establishing the + link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset + control module, so the proper interface initialization is supposed to be + performed by software. There four in- and four outbound iATU regions + which can be used to emit all required TLP types on the PCIe bus. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: baikal,bt1-pcie + + reg: + description: + DBI, DBI2 and at least 4KB outbound iATU-capable region for the + peripheral devices CFG-space access. + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: config + + interrupts: + description: + MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization + request and eight Read/Write eDMA IRQ lines are available. + maxItems: 14 + + interrupt-names: + items: + - const: dma0 + - const: dma1 + - const: dma2 + - const: dma3 + - const: dma4 + - const: dma5 + - const: dma6 + - const: dma7 + - const: msi + - const: aer + - const: pme + - const: hp + - const: bw_mg + - const: l_eq + + clocks: + description: + DBI (attached to the APB bus), AXI-bus master and slave interfaces + are fed up by the dedicated application clocks. A common reference + clock signal is supposed to be attached to the corresponding Ref-pad + of the SoC. It will be redistributed amongst the controller core + sub-modules (pipe, core, aux, etc). + maxItems: 4 + + clock-names: + items: + - const: dbi + - const: mstr + - const: slv + - const: ref + + resets: + description: + A comprehensive controller reset logic is supposed to be implemented + by software, so almost all the possible application and core reset + signals are exposed via the system CCU module. + maxItems: 9 + + reset-names: + items: + - const: mstr + - const: slv + - const: pwr + - const: hot + - const: phy + - const: core + - const: pipe + - const: sticky + - const: non-sticky + + baikal,bt1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the Baikal-T1 System Controller DT node. It's required to + access some additional PM, Reset-related and LTSSM signals. + + num-lanes: + maximum: 4 + + max-link-speed: + maximum: 3 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/gpio/gpio.h> + + pcie@1f052000 { + compatible = "baikal,bt1-pcie"; + device_type = "pci"; + reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>; + reg-names = "dbi", "dbi2", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>, + <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>; + bus-range = <0x0 0xff>; + + interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7", + "msi", "aer", "pme", "hp", "bw_mg", + "l_eq"; + + clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>; + clock-names = "dbi", "mstr", "slv", "ref"; + + resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>, + <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>, + <&ccu_sys 9>; + reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe", + "sticky", "non-sticky"; + + reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>; + + num-lanes = <4>; + max-link-speed = <3>; + }; +... |