diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 74 |
1 files changed, 49 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 2196d1ab3c8c..ae661e65354e 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -21,10 +21,22 @@ can be provided per device. SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". -Optional properties: - reg: Address and length of the register set for the device. - reg-names: Must include the list of following reg names, "membase" +- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" + compatible target. + reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" + compatible target. + Must contain interrupt-names property per entry for + "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. + +- interrupt-names: Must include the entries for MSI interrupt + names ("msi0" to "msi15") and legacy interrupt + name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" + compatible targets. + +Optional properties: - resets: Must contain an entry for each entry in reset-names. See ../reset/reseti.txt for details. - reset-names: Must include the list of following reset names, @@ -37,12 +49,9 @@ Optional properties: - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names. - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc". -- interrupts: List of interrupt lines. Must contain an entry - for each entry in the interrupt-names property. -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy"), + "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and + "cxo_ref_clk_pin" for "qcom,wcn3990-wifi" + compatible target. - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. @@ -55,14 +64,25 @@ Optional properties: - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. - <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" is "vdd-0.8-cx-mx". + optional "supply-name" are "vdd-0.8-cx-mx", + "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". - memory-region: Usage: optional Value type: <phandle> Definition: reference to the reserved-memory for the msa region used by the wifi firmware running in Q6. +- iommus: + Usage: optional + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. +- ext-fem-name: + Usage: Optional + Value type: string + Definition: Name of external front end module used. Some valid FEM names + for example: "microsemi-lx5586", "sky85703-11" + and "sky85803" etc. -Example (to supply the calibration data alone): +Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -74,10 +94,10 @@ pci { #address-cells = <3>; device_type = "pci"; - ath10k@0,0 { + wifi@0,0 { reg = <0 0 0 0 0>; - device_type = "pci"; qcom,ath10k-calibration-data = [ 01 02 03 ... ]; + ext-fem-name = "microsemi-lx5586"; }; }; }; @@ -138,21 +158,25 @@ wifi@18000000 { compatible = "qcom,wcn3990-wifi"; reg = <0x18800000 0x800000>; reg-names = "membase"; - clocks = <&clock_gcc clk_aggre2_noc_clk>; - clock-names = "smmu_aggre2_noc_clk" + clocks = <&clock_gcc clk_rf_clk2_pin>; + clock-names = "cxo_ref_clk_pin"; interrupts = - <0 130 0 /* CE0 */ >, - <0 131 0 /* CE1 */ >, - <0 132 0 /* CE2 */ >, - <0 133 0 /* CE3 */ >, - <0 134 0 /* CE4 */ >, - <0 135 0 /* CE5 */ >, - <0 136 0 /* CE6 */ >, - <0 137 0 /* CE7 */ >, - <0 138 0 /* CE8 */ >, - <0 139 0 /* CE9 */ >, - <0 140 0 /* CE10 */ >, - <0 141 0 /* CE11 */ >; + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; vdd-0.8-cx-mx-supply = <&pm8998_l5>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; memory-region = <&wifi_msa_mem>; + iommus = <&apps_smmu 0x0040 0x1>; }; |