1 files changed, 13 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index f16b99571af1..dd258674633c 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -11,6 +11,7 @@ Required properties:
 
  - compatible: should contain one of the following:
    * "brcm,bcm20702a1"
+   * "brcm,bcm4329-bt"
    * "brcm,bcm4330-bt"
    * "brcm,bcm43438-bt"
    * "brcm,bcm4345c5"
@@ -22,7 +23,9 @@ Optional properties:
  - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
  - shutdown-gpios: GPIO specifier, used to enable the BT module
  - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
- - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor.
+                      deprecated, replaced by interrupts and
+                      "host-wakeup" interrupt-names
  - clocks: 1 or 2 clocks as defined in clock-names below, in that order
  - clock-names: names for clock inputs, matching the clocks given
    - "extclk": deprecated, replaced by "txco"
@@ -30,7 +33,14 @@ Optional properties:
    - "lpo": external low power 32.768 kHz clock
  - vbat-supply: phandle to regulator supply for VBAT
  - vddio-supply: phandle to regulator supply for VDDIO
-
+ - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array
+    - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S
+    - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
+    - pcm-frame-type: short, long
+    - pcm-sync-mode: slave, master
+    - pcm-clock-mode: slave, master
+ - interrupts: must be one, used to wakeup the host processor
+ - interrupt-names: must be "host-wakeup"
 
 Example:
 
@@ -41,5 +51,6 @@ Example:
        bluetooth {
                compatible = "brcm,bcm43438-bt";
                max-speed = <921600>;
+               brcm,bt-pcm-int-params = [01 02 00 01 01];
        };
 };